drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_88PM860X
  15         tristate "Marvell 88PM860x touchscreen"
  16         depends on MFD_88PM860X
  17         help
  18           Say Y here if you have a 88PM860x PMIC and want to enable
  19           support for the built-in touchscreen.
  20
  21           If unsure, say N.
  22
  23           To compile this driver as a module, choose M here: the
  24           module will be called 88pm860x-ts.
  25
  26 config TOUCHSCREEN_ADS7846
  27         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  28         depends on SPI_MASTER
  29         depends on HWMON = n || HWMON
  30         help
  31           Say Y here if you have a touchscreen interface using the
  32           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  33           and your board-specific setup code includes that in its
  34           table of SPI devices.
  35
  36           If HWMON is selected, and the driver is told the reference voltage
  37           on your board, you will also get hwmon interfaces for the voltage
  38           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  39
  40           If unsure, say N (but it's safe to say "Y").
  41
  42           To compile this driver as a module, choose M here: the
  43           module will be called ads7846.
  44
  45 config TOUCHSCREEN_AD7877
  46         tristate "AD7877 based touchscreens"
  47         depends on SPI_MASTER
  48         help
  49           Say Y here if you have a touchscreen interface using the
  50           AD7877 controller, and your board-specific initialization
  51           code includes that in its table of SPI devices.
  52
  53           If unsure, say N (but it's safe to say "Y").
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called ad7877.
  57
  58 config TOUCHSCREEN_AD7879
  59         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  60         help
  61           Say Y here if you want to support a touchscreen interface using
  62           the AD7879-1/AD7889-1 controller.
  63
  64           You should select a bus connection too.
  65
  66           To compile this driver as a module, choose M here: the
  67           module will be called ad7879.
  68
  69 config TOUCHSCREEN_AD7879_I2C
  70         tristate "support I2C bus connection"
  71         depends on TOUCHSCREEN_AD7879 && I2C
  72         help
  73           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  74
  75           To compile this driver as a module, choose M here: the
  76           module will be called ad7879-i2c.
  77
  78 config TOUCHSCREEN_AD7879_SPI
  79         tristate "support SPI bus connection"
  80         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  81         help
  82           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  83
  84           If unsure, say N (but it's safe to say "Y").
  85
  86           To compile this driver as a module, choose M here: the
  87           module will be called ad7879-spi.
  88
  89 config TOUCHSCREEN_ATMEL_MXT
  90         tristate "Atmel mXT I2C Touchscreen"
  91         depends on I2C
  92         help
  93           Say Y here if you have Atmel mXT series I2C touchscreen,
  94           such as AT42QT602240/ATMXT224, connected to your system.
  95
  96           If unsure, say N.
  97
  98           To compile this driver as a module, choose M here: the
  99           module will be called atmel_mxt_ts.
 100
 101 config TOUCHSCREEN_AUO_PIXCIR
 102         tristate "AUO in-cell touchscreen using Pixcir ICs"
 103         depends on I2C
 104         depends on GPIOLIB
 105         help
 106           Say Y here if you have a AUO display with in-cell touchscreen
 107           using Pixcir ICs.
 108
 109           If unsure, say N.
 110
 111           To compile this driver as a module, choose M here: the
 112           module will be called auo-pixcir-ts.
 113
 114 config TOUCHSCREEN_BU21013
 115         tristate "BU21013 based touch panel controllers"
 116         depends on I2C
 117         help
 118           Say Y here if you have a bu21013 touchscreen connected to
 119           your system.
 120
 121           If unsure, say N.
 122
 123           To compile this driver as a module, choose M here: the
 124           module will be called bu21013_ts.
 125
 126 config TOUCHSCREEN_CY8CTMG110
 127         tristate "cy8ctmg110 touchscreen"
 128         depends on I2C
 129         depends on GPIOLIB
 130         help
 131           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 132           an AAVA device.
 133
 134           If unsure, say N.
 135
 136           To compile this driver as a module, choose M here: the
 137           module will be called cy8ctmg110_ts.
 138
 139 config TOUCHSCREEN_CYTTSP_CORE
 140         tristate "Cypress TTSP touchscreen"
 141         help
 142           Say Y here if you have a touchscreen using controller from
 143           the Cypress TrueTouch(tm) Standard Product family connected
 144           to your system. You will also need to select appropriate
 145           bus connection below.
 146
 147           If unsure, say N.
 148
 149           To compile this driver as a module, choose M here: the
 150           module will be called cyttsp_core.
 151
 152 config TOUCHSCREEN_CYTTSP_I2C
 153         tristate "support I2C bus connection"
 154         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 155         help
 156           Say Y here if the touchscreen is connected via I2C bus.
 157
 158           To compile this driver as a module, choose M here: the
 159           module will be called cyttsp_i2c.
 160
 161 config TOUCHSCREEN_CYTTSP_SPI
 162         tristate "support SPI bus connection"
 163         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 164         help
 165           Say Y here if the touchscreen is connected via SPI bus.
 166
 167           To compile this driver as a module, choose M here: the
 168           module will be called cyttsp_spi.
 169
 170 config TOUCHSCREEN_CYTTSP4_CORE
 171         tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 172         help
 173           Core driver for Cypress TrueTouch(tm) Standard Product
 174           Generation4 touchscreen controllers.
 175
 176           Say Y here if you have a Cypress Gen4 touchscreen.
 177
 178           If unsure, say N.
 179
 180           To compile this driver as a module, choose M here.
 181
 182 config TOUCHSCREEN_CYTTSP4_I2C
 183         tristate "support I2C bus connection"
 184         depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 185         help
 186           Say Y here if the touchscreen is connected via I2C bus.
 187
 188           To compile this driver as a module, choose M here: the
 189           module will be called cyttsp4_i2c.
 190
 191 config TOUCHSCREEN_CYTTSP4_SPI
 192         tristate "support SPI bus connection"
 193         depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 194         help
 195           Say Y here if the touchscreen is connected via SPI bus.
 196
 197           To compile this driver as a module, choose M here: the
 198           module will be called cyttsp4_spi.
 199
 200 config TOUCHSCREEN_DA9034
 201         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 202         depends on PMIC_DA903X
 203         default y
 204         help
 205           Say Y here to enable the support for the touchscreen found
 206           on Dialog Semiconductor DA9034 PMIC.
 207
 208           If unsure, say N.
 209
 210           To compile this driver as a module, choose M here: the
 211           module will be called da9034-ts.
 212
 213 config TOUCHSCREEN_DA9052
 214         tristate "Dialog DA9052/DA9053 TSI"
 215         depends on PMIC_DA9052
 216         help
 217           Say Y here to support the touchscreen found on Dialog Semiconductor
 218           DA9052-BC and DA9053-AA/Bx PMICs.
 219
 220           If unsure, say N.
 221
 222           To compile this driver as a module, choose M here: the
 223           module will be called da9052_tsi.
 224
 225 config TOUCHSCREEN_DYNAPRO
 226         tristate "Dynapro serial touchscreen"
 227         select SERIO
 228         help
 229           Say Y here if you have a Dynapro serial touchscreen connected to
 230           your system.
 231
 232           If unsure, say N.
 233
 234           To compile this driver as a module, choose M here: the
 235           module will be called dynapro.
 236
 237 config TOUCHSCREEN_HAMPSHIRE
 238         tristate "Hampshire serial touchscreen"
 239         select SERIO
 240         help
 241           Say Y here if you have a Hampshire serial touchscreen connected to
 242           your system.
 243
 244           If unsure, say N.
 245
 246           To compile this driver as a module, choose M here: the
 247           module will be called hampshire.
 248
 249 config TOUCHSCREEN_EETI
 250         tristate "EETI touchscreen panel support"
 251         depends on I2C
 252         help
 253           Say Y here to enable support for I2C connected EETI touch panels.
 254
 255           To compile this driver as a module, choose M here: the
 256           module will be called eeti_ts.
 257
 258 config TOUCHSCREEN_EGALAX
 259         tristate "EETI eGalax multi-touch panel support"
 260         depends on I2C && OF
 261         help
 262           Say Y here to enable support for I2C connected EETI
 263           eGalax multi-touch panels.
 264
 265           To compile this driver as a module, choose M here: the
 266           module will be called egalax_ts.
 267
 268 config TOUCHSCREEN_FUJITSU
 269         tristate "Fujitsu serial touchscreen"
 270         select SERIO
 271         help
 272           Say Y here if you have the Fujitsu touchscreen (such as one
 273           installed in Lifebook P series laptop) connected to your
 274           system.
 275
 276           If unsure, say N.
 277
 278           To compile this driver as a module, choose M here: the
 279           module will be called fujitsu-ts.
 280
 281 config TOUCHSCREEN_ILI210X
 282         tristate "Ilitek ILI210X based touchscreen"
 283         depends on I2C
 284         help
 285           Say Y here if you have a ILI210X based touchscreen
 286           controller. This driver supports models ILI2102,
 287           ILI2102s, ILI2103, ILI2103s and ILI2105.
 288           Such kind of chipsets can be found in Amazon Kindle Fire
 289           touchscreens.
 290
 291           If unsure, say N.
 292
 293           To compile this driver as a module, choose M here: the
 294           module will be called ili210x.
 295
 296 config TOUCHSCREEN_S3C2410
 297         tristate "Samsung S3C2410/generic touchscreen input driver"
 298         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 299         select S3C_ADC
 300         help
 301           Say Y here if you have the s3c2410 touchscreen.
 302
 303           If unsure, say N.
 304
 305           To compile this driver as a module, choose M here: the
 306           module will be called s3c2410_ts.
 307
 308 config TOUCHSCREEN_GUNZE
 309         tristate "Gunze AHL-51S touchscreen"
 310         select SERIO
 311         help
 312           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 313           your system.
 314
 315           If unsure, say N.
 316
 317           To compile this driver as a module, choose M here: the
 318           module will be called gunze.
 319
 320 config TOUCHSCREEN_ELO
 321         tristate "Elo serial touchscreens"
 322         select SERIO
 323         help
 324           Say Y here if you have an Elo serial touchscreen connected to
 325           your system.
 326
 327           If unsure, say N.
 328
 329           To compile this driver as a module, choose M here: the
 330           module will be called elo.
 331
 332 config TOUCHSCREEN_WACOM_W8001
 333         tristate "Wacom W8001 penabled serial touchscreen"
 334         select SERIO
 335         help
 336           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 337           connected to your system.
 338
 339           If unsure, say N.
 340
 341           To compile this driver as a module, choose M here: the
 342           module will be called wacom_w8001.
 343
 344 config TOUCHSCREEN_WACOM_I2C
 345         tristate "Wacom Tablet support (I2C)"
 346         depends on I2C
 347         help
 348           Say Y here if you want to use the I2C version of the Wacom
 349           Pen Tablet.
 350
 351           If unsure, say N.
 352
 353           To compile this driver as a module, choose M here: the module
 354           will be called wacom_i2c.
 355
 356 config TOUCHSCREEN_LPC32XX
 357         tristate "LPC32XX touchscreen controller"
 358         depends on ARCH_LPC32XX
 359         help
 360           Say Y here if you have a LPC32XX device and want
 361           to support the built-in touchscreen.
 362
 363           To compile this driver as a module, choose M here: the
 364           module will be called lpc32xx_ts.
 365
 366 config TOUCHSCREEN_MAX11801
 367         tristate "MAX11801 based touchscreens"
 368         depends on I2C
 369         help
 370           Say Y here if you have a MAX11801 based touchscreen
 371           controller.
 372
 373           If unsure, say N.
 374
 375           To compile this driver as a module, choose M here: the
 376           module will be called max11801_ts.
 377
 378 config TOUCHSCREEN_MCS5000
 379         tristate "MELFAS MCS-5000 touchscreen"
 380         depends on I2C
 381         help
 382           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 383           chip in your system.
 384
 385           If unsure, say N.
 386
 387           To compile this driver as a module, choose M here: the
 388           module will be called mcs5000_ts.
 389
 390 config TOUCHSCREEN_MMS114
 391         tristate "MELFAS MMS114 touchscreen"
 392         depends on I2C
 393         help
 394           Say Y here if you have the MELFAS MMS114 touchscreen controller
 395           chip in your system.
 396
 397           If unsure, say N.
 398
 399           To compile this driver as a module, choose M here: the
 400           module will be called mms114.
 401
 402 config TOUCHSCREEN_MTOUCH
 403         tristate "MicroTouch serial touchscreens"
 404         select SERIO
 405         help
 406           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 407           your system.
 408
 409           If unsure, say N.
 410
 411           To compile this driver as a module, choose M here: the
 412           module will be called mtouch.
 413
 414 config TOUCHSCREEN_INEXIO
 415         tristate "iNexio serial touchscreens"
 416         select SERIO
 417         help
 418           Say Y here if you have an iNexio serial touchscreen connected to
 419           your system.
 420
 421           If unsure, say N.
 422
 423           To compile this driver as a module, choose M here: the
 424           module will be called inexio.
 425
 426 config TOUCHSCREEN_INTEL_MID
 427         tristate "Intel MID platform resistive touchscreen"
 428         depends on INTEL_SCU_IPC
 429         help
 430           Say Y here if you have a Intel MID based touchscreen in
 431           your system.
 432
 433           If unsure, say N.
 434
 435           To compile this driver as a module, choose M here: the
 436           module will be called intel_mid_touch.
 437
 438 config TOUCHSCREEN_MK712
 439         tristate "ICS MicroClock MK712 touchscreen"
 440         help
 441           Say Y here if you have the ICS MicroClock MK712 touchscreen
 442           controller chip in your system.
 443
 444           If unsure, say N.
 445
 446           To compile this driver as a module, choose M here: the
 447           module will be called mk712.
 448
 449 config TOUCHSCREEN_HP600
 450         tristate "HP Jornada 6xx touchscreen"
 451         depends on SH_HP6XX && SH_ADC
 452         help
 453           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 454           support the built-in touchscreen.
 455
 456           To compile this driver as a module, choose M here: the
 457           module will be called hp680_ts_input.
 458
 459 config TOUCHSCREEN_HP7XX
 460         tristate "HP Jornada 7xx touchscreen"
 461         depends on SA1100_JORNADA720_SSP
 462         help
 463           Say Y here if you have a HP Jornada 710/720/728 and want
 464           to support the built-in touchscreen.
 465
 466           To compile this driver as a module, choose M here: the
 467           module will be called jornada720_ts.
 468
 469 config TOUCHSCREEN_HTCPEN
 470         tristate "HTC Shift X9500 touchscreen"
 471         depends on ISA
 472         help
 473           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 474           Clio / Shangrila and want to support the built-in touchscreen.
 475
 476           If unsure, say N.
 477
 478           To compile this driver as a module, choose M here: the
 479           module will be called htcpen.
 480
 481 config TOUCHSCREEN_PENMOUNT
 482         tristate "Penmount serial touchscreen"
 483         select SERIO
 484         help
 485           Say Y here if you have a Penmount serial touchscreen connected to
 486           your system.
 487
 488           If unsure, say N.
 489
 490           To compile this driver as a module, choose M here: the
 491           module will be called penmount.
 492
 493 config TOUCHSCREEN_EDT_FT5X06
 494         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 495         depends on I2C
 496         help
 497           Say Y here if you have an EDT "Polytouch" touchscreen based
 498           on the FocalTech FT5x06 family of controllers connected to
 499           your system.
 500
 501           If unsure, say N.
 502
 503           To compile this driver as a module, choose M here: the
 504           module will be called edt-ft5x06.
 505
 506 config TOUCHSCREEN_MIGOR
 507         tristate "Renesas MIGO-R touchscreen"
 508         depends on SH_MIGOR && I2C
 509         help
 510           Say Y here to enable MIGO-R touchscreen support.
 511
 512           If unsure, say N.
 513
 514           To compile this driver as a module, choose M here: the
 515           module will be called migor_ts.
 516
 517 config TOUCHSCREEN_TNETV107X
 518         tristate "TI TNETV107X touchscreen support"
 519         depends on ARCH_DAVINCI_TNETV107X
 520         help
 521           Say Y here if you want to use the TNETV107X touchscreen.
 522
 523           To compile this driver as a module, choose M here: the
 524           module will be called tnetv107x-ts.
 525
 526 config TOUCHSCREEN_TOUCHRIGHT
 527         tristate "Touchright serial touchscreen"
 528         select SERIO
 529         help
 530           Say Y here if you have a Touchright serial touchscreen connected to
 531           your system.
 532
 533           If unsure, say N.
 534
 535           To compile this driver as a module, choose M here: the
 536           module will be called touchright.
 537
 538 config TOUCHSCREEN_TOUCHWIN
 539         tristate "Touchwin serial touchscreen"
 540         select SERIO
 541         help
 542           Say Y here if you have a Touchwin serial touchscreen connected to
 543           your system.
 544
 545           If unsure, say N.
 546
 547           To compile this driver as a module, choose M here: the
 548           module will be called touchwin.
 549
 550 config TOUCHSCREEN_TI_AM335X_TSC
 551         tristate "TI Touchscreen Interface"
 552         depends on MFD_TI_AM335X_TSCADC
 553         help
 554           Say Y here if you have 4/5/8 wire touchscreen controller
 555           to be connected to the ADC controller on your TI AM335x SoC.
 556
 557           If unsure, say N.
 558
 559           To compile this driver as a module, choose M here: the
 560           module will be called ti_am335x_tsc.
 561
 562 config TOUCHSCREEN_ATMEL_TSADCC
 563         tristate "Atmel Touchscreen Interface"
 564         depends on ARCH_AT91
 565         help
 566           Say Y here if you have a 4-wire touchscreen connected to the
 567           ADC Controller on your Atmel SoC.
 568
 569           If unsure, say N.
 570
 571           To compile this driver as a module, choose M here: the
 572           module will be called atmel_tsadcc.
 573
 574 config TOUCHSCREEN_UCB1400
 575         tristate "Philips UCB1400 touchscreen"
 576         depends on AC97_BUS
 577         depends on UCB1400_CORE
 578         help
 579           This enables support for the Philips UCB1400 touchscreen interface.
 580           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 581           will be initialized only after the ALSA subsystem has been
 582           brought up and the UCB1400 detected.  You therefore have to
 583           configure ALSA support as well (either built-in or modular,
 584           independently of whether this driver is itself built-in or
 585           modular) for this driver to work.
 586
 587           To compile this driver as a module, choose M here: the
 588           module will be called ucb1400_ts.
 589
 590 config TOUCHSCREEN_PIXCIR
 591         tristate "PIXCIR I2C touchscreens"
 592         depends on I2C
 593         help
 594           Say Y here if you have a pixcir i2c touchscreen
 595           controller.
 596
 597           If unsure, say N.
 598
 599           To compile this driver as a module, choose M here: the
 600           module will be called pixcir_i2c_ts.
 601
 602 config TOUCHSCREEN_WM831X
 603         tristate "Support for WM831x touchscreen controllers"
 604         depends on MFD_WM831X
 605         help
 606           This enables support for the touchscreen controller on the WM831x
 607           series of PMICs.
 608
 609           To compile this driver as a module, choose M here: the
 610           module will be called wm831x-ts.
 611
 612 config TOUCHSCREEN_WM97XX
 613         tristate "Support for WM97xx AC97 touchscreen controllers"
 614         depends on AC97_BUS
 615         help
 616           Say Y here if you have a Wolfson Microelectronics WM97xx
 617           touchscreen connected to your system. Note that this option
 618           only enables core driver, you will also need to select
 619           support for appropriate chip below.
 620
 621           If unsure, say N.
 622
 623           To compile this driver as a module, choose M here: the
 624           module will be called wm97xx-ts.
 625
 626 config TOUCHSCREEN_WM9705
 627         bool "WM9705 Touchscreen interface support"
 628         depends on TOUCHSCREEN_WM97XX
 629         default y
 630         help
 631           Say Y here to enable support for the Wolfson Microelectronics
 632           WM9705 touchscreen controller.
 633
 634 config TOUCHSCREEN_WM9712
 635         bool "WM9712 Touchscreen interface support"
 636         depends on TOUCHSCREEN_WM97XX
 637         default y
 638         help
 639           Say Y here to enable support for the Wolfson Microelectronics
 640           WM9712 touchscreen controller.
 641
 642 config TOUCHSCREEN_WM9713
 643         bool "WM9713 Touchscreen interface support"
 644         depends on TOUCHSCREEN_WM97XX
 645         default y
 646         help
 647           Say Y here to enable support for the Wolfson Microelectronics
 648           WM9713 touchscreen controller.
 649
 650 config TOUCHSCREEN_WM97XX_ATMEL
 651         tristate "WM97xx Atmel accelerated touch"
 652         depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
 653         help
 654           Say Y here for support for streaming mode with WM97xx touchscreens
 655           on Atmel AT91 or AVR32 systems with an AC97C module.
 656
 657           Be aware that this will use channel B in the controller for
 658           streaming data, this must not conflict with other AC97C drivers.
 659
 660           If unsure, say N.
 661
 662           To compile this driver as a module, choose M here: the module will
 663           be called atmel-wm97xx.
 664
 665 config TOUCHSCREEN_WM97XX_MAINSTONE
 666         tristate "WM97xx Mainstone/Palm accelerated touch"
 667         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 668         help
 669           Say Y here for support for streaming mode with WM97xx touchscreens
 670           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 671
 672           If unsure, say N.
 673
 674           To compile this driver as a module, choose M here: the
 675           module will be called mainstone-wm97xx.
 676
 677 config TOUCHSCREEN_WM97XX_ZYLONITE
 678         tristate "Zylonite accelerated touch"
 679         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 680         select TOUCHSCREEN_WM9713
 681         help
 682           Say Y here for support for streaming mode with the touchscreen
 683           on Zylonite systems.
 684
 685           If unsure, say N.
 686
 687           To compile this driver as a module, choose M here: the
 688           module will be called zylonite-wm97xx.
 689
 690 config TOUCHSCREEN_USB_COMPOSITE
 691         tristate "USB Touchscreen Driver"
 692         depends on USB_ARCH_HAS_HCD
 693         select USB
 694         help
 695           USB Touchscreen driver for:
 696           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 697           - PanJit TouchSet USB
 698           - 3M MicroTouch USB (EX II series)
 699           - ITM
 700           - some other eTurboTouch
 701           - Gunze AHL61
 702           - DMC TSC-10/25
 703           - IRTOUCHSYSTEMS/UNITOP
 704           - IdealTEK URTC1000
 705           - GoTop Super_Q2/GogoPen/PenPower tablets
 706           - JASTEC USB Touch Controller/DigiTech DTR-02U
 707           - Zytronic controllers
 708           - Elo TouchSystems 2700 IntelliTouch
 709           - EasyTouch USB Touch Controller from Data Modul
 710           - e2i (Mimo monitors)
 711
 712           Have a look at <http://linux.chapter7.ch/touchkit/> for
 713           a usage description and the required user-space stuff.
 714
 715           To compile this driver as a module, choose M here: the
 716           module will be called usbtouchscreen.
 717
 718 config TOUCHSCREEN_MC13783
 719         tristate "Freescale MC13783 touchscreen input driver"
 720         depends on MFD_MC13783
 721         help
 722           Say Y here if you have an Freescale MC13783 PMIC on your
 723           board and want to use its touchscreen
 724
 725           If unsure, say N.
 726
 727           To compile this driver as a module, choose M here: the
 728           module will be called mc13783_ts.
 729
 730 config TOUCHSCREEN_USB_EGALAX
 731         default y
 732         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 733         depends on TOUCHSCREEN_USB_COMPOSITE
 734
 735 config TOUCHSCREEN_USB_PANJIT
 736         default y
 737         bool "PanJit device support" if EXPERT
 738         depends on TOUCHSCREEN_USB_COMPOSITE
 739
 740 config TOUCHSCREEN_USB_3M
 741         default y
 742         bool "3M/Microtouch EX II series device support" if EXPERT
 743         depends on TOUCHSCREEN_USB_COMPOSITE
 744
 745 config TOUCHSCREEN_USB_ITM
 746         default y
 747         bool "ITM device support" if EXPERT
 748         depends on TOUCHSCREEN_USB_COMPOSITE
 749
 750 config TOUCHSCREEN_USB_ETURBO
 751         default y
 752         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 753         depends on TOUCHSCREEN_USB_COMPOSITE
 754
 755 config TOUCHSCREEN_USB_GUNZE
 756         default y
 757         bool "Gunze AHL61 device support" if EXPERT
 758         depends on TOUCHSCREEN_USB_COMPOSITE
 759
 760 config TOUCHSCREEN_USB_DMC_TSC10
 761         default y
 762         bool "DMC TSC-10/25 device support" if EXPERT
 763         depends on TOUCHSCREEN_USB_COMPOSITE
 764
 765 config TOUCHSCREEN_USB_IRTOUCH
 766         default y
 767         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 768         depends on TOUCHSCREEN_USB_COMPOSITE
 769
 770 config TOUCHSCREEN_USB_IDEALTEK
 771         default y
 772         bool "IdealTEK URTC1000 device support" if EXPERT
 773         depends on TOUCHSCREEN_USB_COMPOSITE
 774
 775 config TOUCHSCREEN_USB_GENERAL_TOUCH
 776         default y
 777         bool "GeneralTouch Touchscreen device support" if EXPERT
 778         depends on TOUCHSCREEN_USB_COMPOSITE
 779
 780 config TOUCHSCREEN_USB_GOTOP
 781         default y
 782         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 783         depends on TOUCHSCREEN_USB_COMPOSITE
 784
 785 config TOUCHSCREEN_USB_JASTEC
 786         default y
 787         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 788         depends on TOUCHSCREEN_USB_COMPOSITE
 789
 790 config TOUCHSCREEN_USB_ELO
 791         default y
 792         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 793         depends on TOUCHSCREEN_USB_COMPOSITE
 794
 795 config TOUCHSCREEN_USB_E2I
 796         default y
 797         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 798         depends on TOUCHSCREEN_USB_COMPOSITE
 799
 800 config TOUCHSCREEN_USB_ZYTRONIC
 801         default y
 802         bool "Zytronic controller" if EXPERT
 803         depends on TOUCHSCREEN_USB_COMPOSITE
 804
 805 config TOUCHSCREEN_USB_ETT_TC45USB
 806         default y
 807         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 808         depends on TOUCHSCREEN_USB_COMPOSITE
 809
 810 config TOUCHSCREEN_USB_NEXIO
 811         default y
 812         bool "NEXIO/iNexio device support" if EXPERT
 813         depends on TOUCHSCREEN_USB_COMPOSITE
 814
 815 config TOUCHSCREEN_USB_EASYTOUCH
 816         default y
 817         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 818         depends on TOUCHSCREEN_USB_COMPOSITE
 819         help
 820           Say Y here if you have an EasyTouch USB Touch controller.
 821           If unsure, say N.
 822
 823 config TOUCHSCREEN_TOUCHIT213
 824         tristate "Sahara TouchIT-213 touchscreen"
 825         select SERIO
 826         help
 827           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 828
 829           If unsure, say N.
 830
 831           To compile this driver as a module, choose M here: the
 832           module will be called touchit213.
 833
 834 config TOUCHSCREEN_TSC_SERIO
 835         tristate "TSC-10/25/40 serial touchscreen support"
 836         select SERIO
 837         help
 838           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 839           to your system.
 840
 841           If unsure, say N.
 842
 843           To compile this driver as a module, choose M here: the
 844           module will be called tsc40.
 845
 846 config TOUCHSCREEN_TSC2005
 847         tristate "TSC2005 based touchscreens"
 848         depends on SPI_MASTER
 849         help
 850           Say Y here if you have a TSC2005 based touchscreen.
 851
 852           If unsure, say N.
 853
 854           To compile this driver as a module, choose M here: the
 855           module will be called tsc2005.
 856
 857 config TOUCHSCREEN_TSC2007
 858         tristate "TSC2007 based touchscreens"
 859         depends on I2C
 860         help
 861           Say Y here if you have a TSC2007 based touchscreen.
 862
 863           If unsure, say N.
 864
 865           To compile this driver as a module, choose M here: the
 866           module will be called tsc2007.
 867
 868 config TOUCHSCREEN_W90X900
 869         tristate "W90P910 touchscreen driver"
 870         depends on HAVE_CLK
 871         help
 872           Say Y here if you have a W90P910 based touchscreen.
 873
 874           To compile this driver as a module, choose M here: the
 875           module will be called w90p910_ts.
 876
 877 config TOUCHSCREEN_PCAP
 878         tristate "Motorola PCAP touchscreen"
 879         depends on EZX_PCAP
 880         help
 881           Say Y here if you have a Motorola EZX telephone and
 882           want to enable support for the built-in touchscreen.
 883
 884           To compile this driver as a module, choose M here: the
 885           module will be called pcap_ts.
 886
 887 config TOUCHSCREEN_ST1232
 888         tristate "Sitronix ST1232 touchscreen controllers"
 889         depends on I2C
 890         help
 891           Say Y here if you want to support Sitronix ST1232
 892           touchscreen controller.
 893
 894           If unsure, say N.
 895
 896           To compile this driver as a module, choose M here: the
 897           module will be called st1232_ts.
 898
 899 config TOUCHSCREEN_STMPE
 900         tristate "STMicroelectronics STMPE touchscreens"
 901         depends on MFD_STMPE
 902         help
 903           Say Y here if you want support for STMicroelectronics
 904           STMPE touchscreen controllers.
 905
 906           To compile this driver as a module, choose M here: the
 907           module will be called stmpe-ts.
 908
 909 config TOUCHSCREEN_TPS6507X
 910         tristate "TPS6507x based touchscreens"
 911         depends on I2C
 912         select INPUT_POLLDEV
 913         help
 914           Say Y here if you have a TPS6507x based touchscreen
 915           controller.
 916
 917           If unsure, say N.
 918
 919           To compile this driver as a module, choose M here: the
 920           module will be called tps6507x_ts.
 921
 922 endif