]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/iommu/amd_iommu_types.h
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
[mirror_ubuntu-artful-kernel.git] / drivers / iommu / amd_iommu_types.h
1 /*
2 * Copyright (C) 2007-2010 Advanced Micro Devices, Inc.
3 * Author: Joerg Roedel <joerg.roedel@amd.com>
4 * Leo Duran <leo.duran@amd.com>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 */
19
20 #ifndef _ASM_X86_AMD_IOMMU_TYPES_H
21 #define _ASM_X86_AMD_IOMMU_TYPES_H
22
23 #include <linux/types.h>
24 #include <linux/mutex.h>
25 #include <linux/list.h>
26 #include <linux/spinlock.h>
27 #include <linux/pci.h>
28 #include <linux/irqreturn.h>
29
30 /*
31 * Maximum number of IOMMUs supported
32 */
33 #define MAX_IOMMUS 32
34
35 /*
36 * some size calculation constants
37 */
38 #define DEV_TABLE_ENTRY_SIZE 32
39 #define ALIAS_TABLE_ENTRY_SIZE 2
40 #define RLOOKUP_TABLE_ENTRY_SIZE (sizeof(void *))
41
42 /* Capability offsets used by the driver */
43 #define MMIO_CAP_HDR_OFFSET 0x00
44 #define MMIO_RANGE_OFFSET 0x0c
45 #define MMIO_MISC_OFFSET 0x10
46
47 /* Masks, shifts and macros to parse the device range capability */
48 #define MMIO_RANGE_LD_MASK 0xff000000
49 #define MMIO_RANGE_FD_MASK 0x00ff0000
50 #define MMIO_RANGE_BUS_MASK 0x0000ff00
51 #define MMIO_RANGE_LD_SHIFT 24
52 #define MMIO_RANGE_FD_SHIFT 16
53 #define MMIO_RANGE_BUS_SHIFT 8
54 #define MMIO_GET_LD(x) (((x) & MMIO_RANGE_LD_MASK) >> MMIO_RANGE_LD_SHIFT)
55 #define MMIO_GET_FD(x) (((x) & MMIO_RANGE_FD_MASK) >> MMIO_RANGE_FD_SHIFT)
56 #define MMIO_GET_BUS(x) (((x) & MMIO_RANGE_BUS_MASK) >> MMIO_RANGE_BUS_SHIFT)
57 #define MMIO_MSI_NUM(x) ((x) & 0x1f)
58
59 /* Flag masks for the AMD IOMMU exclusion range */
60 #define MMIO_EXCL_ENABLE_MASK 0x01ULL
61 #define MMIO_EXCL_ALLOW_MASK 0x02ULL
62
63 /* Used offsets into the MMIO space */
64 #define MMIO_DEV_TABLE_OFFSET 0x0000
65 #define MMIO_CMD_BUF_OFFSET 0x0008
66 #define MMIO_EVT_BUF_OFFSET 0x0010
67 #define MMIO_CONTROL_OFFSET 0x0018
68 #define MMIO_EXCL_BASE_OFFSET 0x0020
69 #define MMIO_EXCL_LIMIT_OFFSET 0x0028
70 #define MMIO_EXT_FEATURES 0x0030
71 #define MMIO_PPR_LOG_OFFSET 0x0038
72 #define MMIO_CMD_HEAD_OFFSET 0x2000
73 #define MMIO_CMD_TAIL_OFFSET 0x2008
74 #define MMIO_EVT_HEAD_OFFSET 0x2010
75 #define MMIO_EVT_TAIL_OFFSET 0x2018
76 #define MMIO_STATUS_OFFSET 0x2020
77 #define MMIO_PPR_HEAD_OFFSET 0x2030
78 #define MMIO_PPR_TAIL_OFFSET 0x2038
79 #define MMIO_CNTR_CONF_OFFSET 0x4000
80 #define MMIO_CNTR_REG_OFFSET 0x40000
81 #define MMIO_REG_END_OFFSET 0x80000
82
83
84
85 /* Extended Feature Bits */
86 #define FEATURE_PREFETCH (1ULL<<0)
87 #define FEATURE_PPR (1ULL<<1)
88 #define FEATURE_X2APIC (1ULL<<2)
89 #define FEATURE_NX (1ULL<<3)
90 #define FEATURE_GT (1ULL<<4)
91 #define FEATURE_IA (1ULL<<6)
92 #define FEATURE_GA (1ULL<<7)
93 #define FEATURE_HE (1ULL<<8)
94 #define FEATURE_PC (1ULL<<9)
95
96 #define FEATURE_PASID_SHIFT 32
97 #define FEATURE_PASID_MASK (0x1fULL << FEATURE_PASID_SHIFT)
98
99 #define FEATURE_GLXVAL_SHIFT 14
100 #define FEATURE_GLXVAL_MASK (0x03ULL << FEATURE_GLXVAL_SHIFT)
101
102 /* Note:
103 * The current driver only support 16-bit PASID.
104 * Currently, hardware only implement upto 16-bit PASID
105 * even though the spec says it could have upto 20 bits.
106 */
107 #define PASID_MASK 0x0000ffff
108
109 /* MMIO status bits */
110 #define MMIO_STATUS_EVT_INT_MASK (1 << 1)
111 #define MMIO_STATUS_COM_WAIT_INT_MASK (1 << 2)
112 #define MMIO_STATUS_PPR_INT_MASK (1 << 6)
113
114 /* event logging constants */
115 #define EVENT_ENTRY_SIZE 0x10
116 #define EVENT_TYPE_SHIFT 28
117 #define EVENT_TYPE_MASK 0xf
118 #define EVENT_TYPE_ILL_DEV 0x1
119 #define EVENT_TYPE_IO_FAULT 0x2
120 #define EVENT_TYPE_DEV_TAB_ERR 0x3
121 #define EVENT_TYPE_PAGE_TAB_ERR 0x4
122 #define EVENT_TYPE_ILL_CMD 0x5
123 #define EVENT_TYPE_CMD_HARD_ERR 0x6
124 #define EVENT_TYPE_IOTLB_INV_TO 0x7
125 #define EVENT_TYPE_INV_DEV_REQ 0x8
126 #define EVENT_DEVID_MASK 0xffff
127 #define EVENT_DEVID_SHIFT 0
128 #define EVENT_DOMID_MASK 0xffff
129 #define EVENT_DOMID_SHIFT 0
130 #define EVENT_FLAGS_MASK 0xfff
131 #define EVENT_FLAGS_SHIFT 0x10
132
133 /* feature control bits */
134 #define CONTROL_IOMMU_EN 0x00ULL
135 #define CONTROL_HT_TUN_EN 0x01ULL
136 #define CONTROL_EVT_LOG_EN 0x02ULL
137 #define CONTROL_EVT_INT_EN 0x03ULL
138 #define CONTROL_COMWAIT_EN 0x04ULL
139 #define CONTROL_INV_TIMEOUT 0x05ULL
140 #define CONTROL_PASSPW_EN 0x08ULL
141 #define CONTROL_RESPASSPW_EN 0x09ULL
142 #define CONTROL_COHERENT_EN 0x0aULL
143 #define CONTROL_ISOC_EN 0x0bULL
144 #define CONTROL_CMDBUF_EN 0x0cULL
145 #define CONTROL_PPFLOG_EN 0x0dULL
146 #define CONTROL_PPFINT_EN 0x0eULL
147 #define CONTROL_PPR_EN 0x0fULL
148 #define CONTROL_GT_EN 0x10ULL
149
150 #define CTRL_INV_TO_MASK (7 << CONTROL_INV_TIMEOUT)
151 #define CTRL_INV_TO_NONE 0
152 #define CTRL_INV_TO_1MS 1
153 #define CTRL_INV_TO_10MS 2
154 #define CTRL_INV_TO_100MS 3
155 #define CTRL_INV_TO_1S 4
156 #define CTRL_INV_TO_10S 5
157 #define CTRL_INV_TO_100S 6
158
159 /* command specific defines */
160 #define CMD_COMPL_WAIT 0x01
161 #define CMD_INV_DEV_ENTRY 0x02
162 #define CMD_INV_IOMMU_PAGES 0x03
163 #define CMD_INV_IOTLB_PAGES 0x04
164 #define CMD_INV_IRT 0x05
165 #define CMD_COMPLETE_PPR 0x07
166 #define CMD_INV_ALL 0x08
167
168 #define CMD_COMPL_WAIT_STORE_MASK 0x01
169 #define CMD_COMPL_WAIT_INT_MASK 0x02
170 #define CMD_INV_IOMMU_PAGES_SIZE_MASK 0x01
171 #define CMD_INV_IOMMU_PAGES_PDE_MASK 0x02
172 #define CMD_INV_IOMMU_PAGES_GN_MASK 0x04
173
174 #define PPR_STATUS_MASK 0xf
175 #define PPR_STATUS_SHIFT 12
176
177 #define CMD_INV_IOMMU_ALL_PAGES_ADDRESS 0x7fffffffffffffffULL
178
179 /* macros and definitions for device table entries */
180 #define DEV_ENTRY_VALID 0x00
181 #define DEV_ENTRY_TRANSLATION 0x01
182 #define DEV_ENTRY_IR 0x3d
183 #define DEV_ENTRY_IW 0x3e
184 #define DEV_ENTRY_NO_PAGE_FAULT 0x62
185 #define DEV_ENTRY_EX 0x67
186 #define DEV_ENTRY_SYSMGT1 0x68
187 #define DEV_ENTRY_SYSMGT2 0x69
188 #define DEV_ENTRY_IRQ_TBL_EN 0x80
189 #define DEV_ENTRY_INIT_PASS 0xb8
190 #define DEV_ENTRY_EINT_PASS 0xb9
191 #define DEV_ENTRY_NMI_PASS 0xba
192 #define DEV_ENTRY_LINT0_PASS 0xbe
193 #define DEV_ENTRY_LINT1_PASS 0xbf
194 #define DEV_ENTRY_MODE_MASK 0x07
195 #define DEV_ENTRY_MODE_SHIFT 0x09
196
197 #define MAX_DEV_TABLE_ENTRIES 0xffff
198
199 /* constants to configure the command buffer */
200 #define CMD_BUFFER_SIZE 8192
201 #define CMD_BUFFER_UNINITIALIZED 1
202 #define CMD_BUFFER_ENTRIES 512
203 #define MMIO_CMD_SIZE_SHIFT 56
204 #define MMIO_CMD_SIZE_512 (0x9ULL << MMIO_CMD_SIZE_SHIFT)
205
206 /* constants for event buffer handling */
207 #define EVT_BUFFER_SIZE 8192 /* 512 entries */
208 #define EVT_LEN_MASK (0x9ULL << 56)
209
210 /* Constants for PPR Log handling */
211 #define PPR_LOG_ENTRIES 512
212 #define PPR_LOG_SIZE_SHIFT 56
213 #define PPR_LOG_SIZE_512 (0x9ULL << PPR_LOG_SIZE_SHIFT)
214 #define PPR_ENTRY_SIZE 16
215 #define PPR_LOG_SIZE (PPR_ENTRY_SIZE * PPR_LOG_ENTRIES)
216
217 #define PPR_REQ_TYPE(x) (((x) >> 60) & 0xfULL)
218 #define PPR_FLAGS(x) (((x) >> 48) & 0xfffULL)
219 #define PPR_DEVID(x) ((x) & 0xffffULL)
220 #define PPR_TAG(x) (((x) >> 32) & 0x3ffULL)
221 #define PPR_PASID1(x) (((x) >> 16) & 0xffffULL)
222 #define PPR_PASID2(x) (((x) >> 42) & 0xfULL)
223 #define PPR_PASID(x) ((PPR_PASID2(x) << 16) | PPR_PASID1(x))
224
225 #define PPR_REQ_FAULT 0x01
226
227 #define PAGE_MODE_NONE 0x00
228 #define PAGE_MODE_1_LEVEL 0x01
229 #define PAGE_MODE_2_LEVEL 0x02
230 #define PAGE_MODE_3_LEVEL 0x03
231 #define PAGE_MODE_4_LEVEL 0x04
232 #define PAGE_MODE_5_LEVEL 0x05
233 #define PAGE_MODE_6_LEVEL 0x06
234
235 #define PM_LEVEL_SHIFT(x) (12 + ((x) * 9))
236 #define PM_LEVEL_SIZE(x) (((x) < 6) ? \
237 ((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
238 (0xffffffffffffffffULL))
239 #define PM_LEVEL_INDEX(x, a) (((a) >> PM_LEVEL_SHIFT((x))) & 0x1ffULL)
240 #define PM_LEVEL_ENC(x) (((x) << 9) & 0xe00ULL)
241 #define PM_LEVEL_PDE(x, a) ((a) | PM_LEVEL_ENC((x)) | \
242 IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
243 #define PM_PTE_LEVEL(pte) (((pte) >> 9) & 0x7ULL)
244
245 #define PM_MAP_4k 0
246 #define PM_ADDR_MASK 0x000ffffffffff000ULL
247 #define PM_MAP_MASK(lvl) (PM_ADDR_MASK & \
248 (~((1ULL << (12 + ((lvl) * 9))) - 1)))
249 #define PM_ALIGNED(lvl, addr) ((PM_MAP_MASK(lvl) & (addr)) == (addr))
250
251 /*
252 * Returns the page table level to use for a given page size
253 * Pagesize is expected to be a power-of-two
254 */
255 #define PAGE_SIZE_LEVEL(pagesize) \
256 ((__ffs(pagesize) - 12) / 9)
257 /*
258 * Returns the number of ptes to use for a given page size
259 * Pagesize is expected to be a power-of-two
260 */
261 #define PAGE_SIZE_PTE_COUNT(pagesize) \
262 (1ULL << ((__ffs(pagesize) - 12) % 9))
263
264 /*
265 * Aligns a given io-virtual address to a given page size
266 * Pagesize is expected to be a power-of-two
267 */
268 #define PAGE_SIZE_ALIGN(address, pagesize) \
269 ((address) & ~((pagesize) - 1))
270 /*
271 * Creates an IOMMU PTE for an address and a given pagesize
272 * The PTE has no permission bits set
273 * Pagesize is expected to be a power-of-two larger than 4096
274 */
275 #define PAGE_SIZE_PTE(address, pagesize) \
276 (((address) | ((pagesize) - 1)) & \
277 (~(pagesize >> 1)) & PM_ADDR_MASK)
278
279 /*
280 * Takes a PTE value with mode=0x07 and returns the page size it maps
281 */
282 #define PTE_PAGE_SIZE(pte) \
283 (1ULL << (1 + ffz(((pte) | 0xfffULL))))
284
285 #define IOMMU_PTE_P (1ULL << 0)
286 #define IOMMU_PTE_TV (1ULL << 1)
287 #define IOMMU_PTE_U (1ULL << 59)
288 #define IOMMU_PTE_FC (1ULL << 60)
289 #define IOMMU_PTE_IR (1ULL << 61)
290 #define IOMMU_PTE_IW (1ULL << 62)
291
292 #define DTE_FLAG_IOTLB (0x01UL << 32)
293 #define DTE_FLAG_GV (0x01ULL << 55)
294 #define DTE_GLX_SHIFT (56)
295 #define DTE_GLX_MASK (3)
296
297 #define DTE_GCR3_VAL_A(x) (((x) >> 12) & 0x00007ULL)
298 #define DTE_GCR3_VAL_B(x) (((x) >> 15) & 0x0ffffULL)
299 #define DTE_GCR3_VAL_C(x) (((x) >> 31) & 0xfffffULL)
300
301 #define DTE_GCR3_INDEX_A 0
302 #define DTE_GCR3_INDEX_B 1
303 #define DTE_GCR3_INDEX_C 1
304
305 #define DTE_GCR3_SHIFT_A 58
306 #define DTE_GCR3_SHIFT_B 16
307 #define DTE_GCR3_SHIFT_C 43
308
309 #define GCR3_VALID 0x01ULL
310
311 #define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
312 #define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
313 #define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
314 #define IOMMU_PTE_MODE(pte) (((pte) >> 9) & 0x07)
315
316 #define IOMMU_PROT_MASK 0x03
317 #define IOMMU_PROT_IR 0x01
318 #define IOMMU_PROT_IW 0x02
319
320 /* IOMMU capabilities */
321 #define IOMMU_CAP_IOTLB 24
322 #define IOMMU_CAP_NPCACHE 26
323 #define IOMMU_CAP_EFR 27
324
325 #define MAX_DOMAIN_ID 65536
326
327 /* Protection domain flags */
328 #define PD_DMA_OPS_MASK (1UL << 0) /* domain used for dma_ops */
329 #define PD_DEFAULT_MASK (1UL << 1) /* domain is a default dma_ops
330 domain for an IOMMU */
331 #define PD_PASSTHROUGH_MASK (1UL << 2) /* domain has no page
332 translation */
333 #define PD_IOMMUV2_MASK (1UL << 3) /* domain has gcr3 table */
334
335 extern bool amd_iommu_dump;
336 #define DUMP_printk(format, arg...) \
337 do { \
338 if (amd_iommu_dump) \
339 printk(KERN_INFO "AMD-Vi: " format, ## arg); \
340 } while(0);
341
342 /* global flag if IOMMUs cache non-present entries */
343 extern bool amd_iommu_np_cache;
344 /* Only true if all IOMMUs support device IOTLBs */
345 extern bool amd_iommu_iotlb_sup;
346
347 #define MAX_IRQS_PER_TABLE 256
348 #define IRQ_TABLE_ALIGNMENT 128
349
350 struct irq_remap_table {
351 spinlock_t lock;
352 unsigned min_index;
353 u32 *table;
354 };
355
356 extern struct irq_remap_table **irq_lookup_table;
357
358 /* Interrupt remapping feature used? */
359 extern bool amd_iommu_irq_remap;
360
361 /* kmem_cache to get tables with 128 byte alignement */
362 extern struct kmem_cache *amd_iommu_irq_cache;
363
364 /*
365 * Make iterating over all IOMMUs easier
366 */
367 #define for_each_iommu(iommu) \
368 list_for_each_entry((iommu), &amd_iommu_list, list)
369 #define for_each_iommu_safe(iommu, next) \
370 list_for_each_entry_safe((iommu), (next), &amd_iommu_list, list)
371
372 #define APERTURE_RANGE_SHIFT 27 /* 128 MB */
373 #define APERTURE_RANGE_SIZE (1ULL << APERTURE_RANGE_SHIFT)
374 #define APERTURE_RANGE_PAGES (APERTURE_RANGE_SIZE >> PAGE_SHIFT)
375 #define APERTURE_MAX_RANGES 32 /* allows 4GB of DMA address space */
376 #define APERTURE_RANGE_INDEX(a) ((a) >> APERTURE_RANGE_SHIFT)
377 #define APERTURE_PAGE_INDEX(a) (((a) >> 21) & 0x3fULL)
378
379
380 /*
381 * This struct is used to pass information about
382 * incoming PPR faults around.
383 */
384 struct amd_iommu_fault {
385 u64 address; /* IO virtual address of the fault*/
386 u32 pasid; /* Address space identifier */
387 u16 device_id; /* Originating PCI device id */
388 u16 tag; /* PPR tag */
389 u16 flags; /* Fault flags */
390
391 };
392
393
394 struct iommu_domain;
395
396 /*
397 * This structure contains generic data for IOMMU protection domains
398 * independent of their use.
399 */
400 struct protection_domain {
401 struct list_head list; /* for list of all protection domains */
402 struct list_head dev_list; /* List of all devices in this domain */
403 spinlock_t lock; /* mostly used to lock the page table*/
404 struct mutex api_lock; /* protect page tables in the iommu-api path */
405 u16 id; /* the domain id written to the device table */
406 int mode; /* paging mode (0-6 levels) */
407 u64 *pt_root; /* page table root pointer */
408 int glx; /* Number of levels for GCR3 table */
409 u64 *gcr3_tbl; /* Guest CR3 table */
410 unsigned long flags; /* flags to find out type of domain */
411 bool updated; /* complete domain flush required */
412 unsigned dev_cnt; /* devices assigned to this domain */
413 unsigned dev_iommu[MAX_IOMMUS]; /* per-IOMMU reference count */
414 void *priv; /* private data */
415 struct iommu_domain *iommu_domain; /* Pointer to generic
416 domain structure */
417
418 };
419
420 /*
421 * This struct contains device specific data for the IOMMU
422 */
423 struct iommu_dev_data {
424 struct list_head list; /* For domain->dev_list */
425 struct list_head dev_data_list; /* For global dev_data_list */
426 struct iommu_dev_data *alias_data;/* The alias dev_data */
427 struct protection_domain *domain; /* Domain the device is bound to */
428 atomic_t bind; /* Domain attach reference count */
429 u16 devid; /* PCI Device ID */
430 bool iommu_v2; /* Device can make use of IOMMUv2 */
431 bool passthrough; /* Default for device is pt_domain */
432 struct {
433 bool enabled;
434 int qdep;
435 } ats; /* ATS state */
436 bool pri_tlp; /* PASID TLB required for
437 PPR completions */
438 u32 errata; /* Bitmap for errata to apply */
439 };
440
441 /*
442 * For dynamic growth the aperture size is split into ranges of 128MB of
443 * DMA address space each. This struct represents one such range.
444 */
445 struct aperture_range {
446
447 /* address allocation bitmap */
448 unsigned long *bitmap;
449
450 /*
451 * Array of PTE pages for the aperture. In this array we save all the
452 * leaf pages of the domain page table used for the aperture. This way
453 * we don't need to walk the page table to find a specific PTE. We can
454 * just calculate its address in constant time.
455 */
456 u64 *pte_pages[64];
457
458 unsigned long offset;
459 };
460
461 /*
462 * Data container for a dma_ops specific protection domain
463 */
464 struct dma_ops_domain {
465 struct list_head list;
466
467 /* generic protection domain information */
468 struct protection_domain domain;
469
470 /* size of the aperture for the mappings */
471 unsigned long aperture_size;
472
473 /* address we start to search for free addresses */
474 unsigned long next_address;
475
476 /* address space relevant data */
477 struct aperture_range *aperture[APERTURE_MAX_RANGES];
478
479 /* This will be set to true when TLB needs to be flushed */
480 bool need_flush;
481
482 /*
483 * if this is a preallocated domain, keep the device for which it was
484 * preallocated in this variable
485 */
486 u16 target_dev;
487 };
488
489 /*
490 * Structure where we save information about one hardware AMD IOMMU in the
491 * system.
492 */
493 struct amd_iommu {
494 struct list_head list;
495
496 /* Index within the IOMMU array */
497 int index;
498
499 /* locks the accesses to the hardware */
500 spinlock_t lock;
501
502 /* Pointer to PCI device of this IOMMU */
503 struct pci_dev *dev;
504
505 /* Cache pdev to root device for resume quirks */
506 struct pci_dev *root_pdev;
507
508 /* physical address of MMIO space */
509 u64 mmio_phys;
510
511 /* physical end address of MMIO space */
512 u64 mmio_phys_end;
513
514 /* virtual address of MMIO space */
515 u8 __iomem *mmio_base;
516
517 /* capabilities of that IOMMU read from ACPI */
518 u32 cap;
519
520 /* flags read from acpi table */
521 u8 acpi_flags;
522
523 /* Extended features */
524 u64 features;
525
526 /* IOMMUv2 */
527 bool is_iommu_v2;
528
529 /* PCI device id of the IOMMU device */
530 u16 devid;
531
532 /*
533 * Capability pointer. There could be more than one IOMMU per PCI
534 * device function if there are more than one AMD IOMMU capability
535 * pointers.
536 */
537 u16 cap_ptr;
538
539 /* pci domain of this IOMMU */
540 u16 pci_seg;
541
542 /* first device this IOMMU handles. read from PCI */
543 u16 first_device;
544 /* last device this IOMMU handles. read from PCI */
545 u16 last_device;
546
547 /* start of exclusion range of that IOMMU */
548 u64 exclusion_start;
549 /* length of exclusion range of that IOMMU */
550 u64 exclusion_length;
551
552 /* command buffer virtual address */
553 u8 *cmd_buf;
554 /* size of command buffer */
555 u32 cmd_buf_size;
556
557 /* size of event buffer */
558 u32 evt_buf_size;
559 /* event buffer virtual address */
560 u8 *evt_buf;
561
562 /* Base of the PPR log, if present */
563 u8 *ppr_log;
564
565 /* true if interrupts for this IOMMU are already enabled */
566 bool int_enabled;
567
568 /* if one, we need to send a completion wait command */
569 bool need_sync;
570
571 /* default dma_ops domain for that IOMMU */
572 struct dma_ops_domain *default_dom;
573
574 /* IOMMU sysfs device */
575 struct device *iommu_dev;
576
577 /*
578 * We can't rely on the BIOS to restore all values on reinit, so we
579 * need to stash them
580 */
581
582 /* The iommu BAR */
583 u32 stored_addr_lo;
584 u32 stored_addr_hi;
585
586 /*
587 * Each iommu has 6 l1s, each of which is documented as having 0x12
588 * registers
589 */
590 u32 stored_l1[6][0x12];
591
592 /* The l2 indirect registers */
593 u32 stored_l2[0x83];
594
595 /* The maximum PC banks and counters/bank (PCSup=1) */
596 u8 max_banks;
597 u8 max_counters;
598 };
599
600 struct devid_map {
601 struct list_head list;
602 u8 id;
603 u16 devid;
604 bool cmd_line;
605 };
606
607 /* Map HPET and IOAPIC ids to the devid used by the IOMMU */
608 extern struct list_head ioapic_map;
609 extern struct list_head hpet_map;
610
611 /*
612 * List with all IOMMUs in the system. This list is not locked because it is
613 * only written and read at driver initialization or suspend time
614 */
615 extern struct list_head amd_iommu_list;
616
617 /*
618 * Array with pointers to each IOMMU struct
619 * The indices are referenced in the protection domains
620 */
621 extern struct amd_iommu *amd_iommus[MAX_IOMMUS];
622
623 /* Number of IOMMUs present in the system */
624 extern int amd_iommus_present;
625
626 /*
627 * Declarations for the global list of all protection domains
628 */
629 extern spinlock_t amd_iommu_pd_lock;
630 extern struct list_head amd_iommu_pd_list;
631
632 /*
633 * Structure defining one entry in the device table
634 */
635 struct dev_table_entry {
636 u64 data[4];
637 };
638
639 /*
640 * One entry for unity mappings parsed out of the ACPI table.
641 */
642 struct unity_map_entry {
643 struct list_head list;
644
645 /* starting device id this entry is used for (including) */
646 u16 devid_start;
647 /* end device id this entry is used for (including) */
648 u16 devid_end;
649
650 /* start address to unity map (including) */
651 u64 address_start;
652 /* end address to unity map (including) */
653 u64 address_end;
654
655 /* required protection */
656 int prot;
657 };
658
659 /*
660 * List of all unity mappings. It is not locked because as runtime it is only
661 * read. It is created at ACPI table parsing time.
662 */
663 extern struct list_head amd_iommu_unity_map;
664
665 /*
666 * Data structures for device handling
667 */
668
669 /*
670 * Device table used by hardware. Read and write accesses by software are
671 * locked with the amd_iommu_pd_table lock.
672 */
673 extern struct dev_table_entry *amd_iommu_dev_table;
674
675 /*
676 * Alias table to find requestor ids to device ids. Not locked because only
677 * read on runtime.
678 */
679 extern u16 *amd_iommu_alias_table;
680
681 /*
682 * Reverse lookup table to find the IOMMU which translates a specific device.
683 */
684 extern struct amd_iommu **amd_iommu_rlookup_table;
685
686 /* size of the dma_ops aperture as power of 2 */
687 extern unsigned amd_iommu_aperture_order;
688
689 /* largest PCI device id we expect translation requests for */
690 extern u16 amd_iommu_last_bdf;
691
692 /* allocation bitmap for domain ids */
693 extern unsigned long *amd_iommu_pd_alloc_bitmap;
694
695 /*
696 * If true, the addresses will be flushed on unmap time, not when
697 * they are reused
698 */
699 extern u32 amd_iommu_unmap_flush;
700
701 /* Smallest max PASID supported by any IOMMU in the system */
702 extern u32 amd_iommu_max_pasid;
703
704 extern bool amd_iommu_v2_present;
705
706 extern bool amd_iommu_force_isolation;
707
708 /* Max levels of glxval supported */
709 extern int amd_iommu_max_glx_val;
710
711 /*
712 * This function flushes all internal caches of
713 * the IOMMU used by this driver.
714 */
715 extern void iommu_flush_all_caches(struct amd_iommu *iommu);
716
717 static inline int get_ioapic_devid(int id)
718 {
719 struct devid_map *entry;
720
721 list_for_each_entry(entry, &ioapic_map, list) {
722 if (entry->id == id)
723 return entry->devid;
724 }
725
726 return -EINVAL;
727 }
728
729 static inline int get_hpet_devid(int id)
730 {
731 struct devid_map *entry;
732
733 list_for_each_entry(entry, &hpet_map, list) {
734 if (entry->id == id)
735 return entry->devid;
736 }
737
738 return -EINVAL;
739 }
740
741 #ifdef CONFIG_AMD_IOMMU_STATS
742
743 struct __iommu_counter {
744 char *name;
745 struct dentry *dent;
746 u64 value;
747 };
748
749 #define DECLARE_STATS_COUNTER(nm) \
750 static struct __iommu_counter nm = { \
751 .name = #nm, \
752 }
753
754 #define INC_STATS_COUNTER(name) name.value += 1
755 #define ADD_STATS_COUNTER(name, x) name.value += (x)
756 #define SUB_STATS_COUNTER(name, x) name.value -= (x)
757
758 #else /* CONFIG_AMD_IOMMU_STATS */
759
760 #define DECLARE_STATS_COUNTER(name)
761 #define INC_STATS_COUNTER(name)
762 #define ADD_STATS_COUNTER(name, x)
763 #define SUB_STATS_COUNTER(name, x)
764
765 #endif /* CONFIG_AMD_IOMMU_STATS */
766
767 #endif /* _ASM_X86_AMD_IOMMU_TYPES_H */