drivers/macintosh/Kconfig

   1
   2 menu "Macintosh device drivers"
   3         depends on PPC || MAC
   4
   5 config ADB
   6         bool "Apple Desktop Bus (ADB) support"
   7         depends on MAC || PPC_PMAC
   8         help
   9           Apple Desktop Bus (ADB) support is for support of devices which
  10           are connected to an ADB port.  ADB devices tend to have 4 pins.
  11           If you have an Apple Macintosh prior to the iMac, an iBook or
  12           PowerBook, or a "Blue and White G3", you probably want to say Y
  13           here.  Otherwise say N.
  14
  15 config ADB_MACII
  16         bool "Include Mac II ADB driver"
  17         depends on ADB && MAC
  18         help
  19           Say Y here if want your kernel to support Macintosh systems that use
  20           the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
  21           Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
  22           Centris 650.
  23
  24 config ADB_MACIISI
  25         bool "Include Mac IIsi ADB driver"
  26         depends on ADB && MAC
  27         help
  28           Say Y here if want your kernel to support Macintosh systems that use
  29           the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
  30           II, LC, LC II, LC III, Performa 460, and the Performa 600.
  31
  32 config ADB_IOP
  33         bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
  34         depends on ADB && MAC
  35         help
  36           The I/O Processor (IOP) is an Apple custom IC designed to provide
  37           intelligent support for I/O controllers.  It is described at
  38           <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
  39           support for it, say 'Y' here.
  40
  41 config ADB_PMU68K
  42         bool "Include PMU (Powerbook) ADB driver"
  43         depends on ADB && MAC
  44         help
  45           Say Y here if want your kernel to support the m68k based Powerbooks.
  46           This includes the PowerBook 140, PowerBook 145, PowerBook 150,
  47           PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
  48           PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
  49           PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
  50           PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
  51
  52 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
  53 config ADB_CUDA
  54         bool "Support for CUDA based Macs and PowerMacs"
  55         depends on (ADB || PPC_PMAC) && !PPC_PMAC64
  56         help
  57           This provides support for CUDA based Macintosh and Power Macintosh
  58           systems.  This includes many m68k based Macs (Color Classic, Mac TV,
  59           Performa 475, Performa 520, Performa 550, Performa 575,
  60           Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
  61           Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
  62           the Blue&White G3 and the "Yikes" G4 (PCI Graphics).  All later
  63           models should use CONFIG_ADB_PMU instead.  It is safe to say Y here
  64           even if your machine doesn't have a CUDA.
  65
  66           If unsure say Y.
  67
  68 config ADB_PMU
  69         bool "Support for PMU  based PowerMacs"
  70         depends on PPC_PMAC
  71         help
  72           On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
  73           PMU is an embedded microprocessor whose primary function is to
  74           control system power, and battery charging on the portable models.
  75           The PMU also controls the ADB (Apple Desktop Bus) which connects to
  76           the keyboard and mouse on some machines, as well as the non-volatile
  77           RAM and the RTC (real time clock) chip.  Say Y to enable support for
  78           this device; you should do so if your machine is one of those
  79           mentioned above.
  80
  81 config PMAC_SMU
  82         bool "Support for SMU  based PowerMacs"
  83         depends on PPC_PMAC64
  84         help
  85           This option adds support for the newer G5 iMacs and PowerMacs based
  86           on the "SMU" system control chip which replaces the old PMU.
  87           If you don't know, say Y.
  88
  89 config PMAC_PBOOK
  90         bool "Power management support for PowerBooks"
  91         depends on ADB_PMU
  92         ---help---
  93           This provides support for putting a PowerBook to sleep; it also
  94           enables media bay support.  Power management works on the
  95           PB2400/3400/3500, Wallstreet, Lombard, and Bronze PowerBook G3 and
  96           the Titanium Powerbook G4, as well as the iBooks.  You should get
  97           the power management daemon, pmud, to make it work and you must have
  98           the /dev/pmu device (see the pmud README).
  99
 100           Get pmud from <ftp://ftp.samba.org/pub/ppclinux/pmud/>.
 101
 102           If you have a PowerBook, you should say Y here.
 103
 104           You may also want to compile the dma sound driver as a module and
 105           have it autoloaded. The act of removing the module shuts down the
 106           sound hardware for more power savings.
 107
 108 config PM
 109         bool
 110         depends on PPC_PMAC && ADB_PMU && PMAC_PBOOK
 111         default y
 112
 113 config PMAC_APM_EMU
 114         tristate "APM emulation"
 115         depends on PMAC_PBOOK
 116
 117 # made a separate option since backlight may end up beeing used
 118 # on non-powerbook machines (but only on PMU based ones AFAIK)
 119 config PMAC_BACKLIGHT
 120         bool "Backlight control for LCD screens"
 121         depends on ADB_PMU
 122         help
 123           Say Y here to build in code to manage the LCD backlight on a
 124           Macintosh PowerBook.  With this code, the backlight will be turned
 125           on and off appropriately on power-management and lid-open/lid-closed
 126           events; also, the PowerBook button device will be enabled so you can
 127           change the screen brightness.
 128
 129 config MAC_SERIAL
 130         tristate "Support for PowerMac serial ports (OBSOLETE DRIVER)"
 131         depends on PPC_PMAC && BROKEN
 132         help
 133           This driver is obsolete. Use CONFIG_SERIAL_PMACZILOG in
 134           "Character devices --> Serial drivers --> PowerMac z85c30" option.
 135
 136 config ADB_MACIO
 137         bool "Include MacIO (CHRP) ADB driver"
 138         depends on ADB && PPC_CHRP && !PPC_PMAC64
 139         help
 140           Say Y here to include direct support for the ADB controller in the
 141           Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
 142           also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
 143           OpenPIC controller and two RS422/Geoports.)
 144
 145 config INPUT_ADBHID
 146         bool "Support for ADB input devices (keyboard, mice, ...)"
 147         depends on ADB && INPUT=y
 148         help
 149           Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
 150           such as keyboards, mice, joysticks, trackpads  or graphic tablets
 151           handled by the input layer.  If you say Y here, make sure to say Y to
 152           the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
 153           "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
 154           support" (CONFIG_INPUT_EVDEV) as well.
 155
 156           If unsure, say Y.
 157
 158 config MAC_EMUMOUSEBTN
 159         bool "Support for mouse button 2+3 emulation"
 160         depends on INPUT_ADBHID
 161         help
 162           This provides generic support for emulating the 2nd and 3rd mouse
 163           button with keypresses.  If you say Y here, the emulation is still
 164           disabled by default.  The emulation is controlled by these sysctl
 165           entries:
 166           /proc/sys/dev/mac_hid/mouse_button_emulation
 167           /proc/sys/dev/mac_hid/mouse_button2_keycode
 168           /proc/sys/dev/mac_hid/mouse_button3_keycode
 169
 170           If you have an Apple machine with a 1-button mouse, say Y here.
 171
 172 config THERM_WINDTUNNEL
 173         tristate "Support for thermal management on Windtunnel G4s"
 174         depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
 175         help
 176           This driver provides some thermostat and fan control for the desktop
 177           G4 "Windtunnel"
 178
 179 config THERM_ADT746X
 180         tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
 181         depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
 182         help
 183           This driver provides some thermostat and fan control for the
 184           iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
 185           better fan behaviour by default, and some manual control.
 186
 187 config THERM_PM72
 188         tristate "Support for thermal management on PowerMac G5"
 189         depends on I2C && I2C_KEYWEST && PPC_PMAC64
 190         help
 191           This driver provides thermostat and fan control for the desktop
 192           G5 machines.
 193
 194 config ANSLCD
 195         tristate "Support for ANS LCD display"
 196         depends on ADB_CUDA && PPC_PMAC
 197
 198 endmenu