drivers/macintosh/Kconfig

   1
   2 menuconfig MACINTOSH_DRIVERS
   3         bool "Macintosh device drivers"
   4         depends on PPC || MAC || X86
   5         default y if (PPC_PMAC || MAC)
   6         ---help---
   7           Say Y here to get to see options for devices used with Macintosh
   8           computers. This option alone does not add any kernel code.
   9
  10           If you say N, all options in this submenu will be skipped and disabled.
  11
  12 if MACINTOSH_DRIVERS
  13
  14 config ADB
  15         bool "Apple Desktop Bus (ADB) support"
  16         depends on MAC || (PPC_PMAC && PPC32)
  17         help
  18           Apple Desktop Bus (ADB) support is for support of devices which
  19           are connected to an ADB port.  ADB devices tend to have 4 pins.
  20           If you have an Apple Macintosh prior to the iMac, an iBook or
  21           PowerBook, or a "Blue and White G3", you probably want to say Y
  22           here.  Otherwise say N.
  23
  24 config ADB_MACII
  25         bool "Include Mac II ADB driver"
  26         depends on ADB && MAC
  27         help
  28           Say Y here if want your kernel to support Macintosh systems that use
  29           the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
  30           Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
  31           Centris 650.
  32
  33 config ADB_IOP
  34         bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
  35         depends on ADB && MAC
  36         help
  37           The I/O Processor (IOP) is an Apple custom IC designed to provide
  38           intelligent support for I/O controllers.  It is described at
  39           <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
  40           support for it, say 'Y' here.
  41
  42 config ADB_PMU68K
  43         bool "Include PMU (Powerbook) ADB driver"
  44         depends on ADB && MAC
  45         help
  46           Say Y here if want your kernel to support the m68k based Powerbooks.
  47           This includes the PowerBook 140, PowerBook 145, PowerBook 150,
  48           PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
  49           PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
  50           PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
  51           PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
  52
  53 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
  54 config ADB_CUDA
  55         bool "Support for Cuda/Egret based Macs and PowerMacs"
  56         depends on (ADB || PPC_PMAC) && !PPC_PMAC64
  57         help
  58           This provides support for Cuda/Egret based Macintosh and
  59           Power Macintosh systems. This includes most m68k based Macs,
  60           most Old World PowerMacs, the first generation iMacs, the
  61           Blue & White G3 and the "Yikes" G4 (PCI Graphics). All later
  62           models should use CONFIG_ADB_PMU instead. It is safe to say Y
  63           here even if your machine doesn't have a Cuda or Egret device.
  64
  65           If unsure say Y.
  66
  67 config ADB_PMU
  68         bool "Support for PMU  based PowerMacs"
  69         depends on PPC_PMAC
  70         help
  71           On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
  72           PMU is an embedded microprocessor whose primary function is to
  73           control system power, and battery charging on the portable models.
  74           The PMU also controls the ADB (Apple Desktop Bus) which connects to
  75           the keyboard and mouse on some machines, as well as the non-volatile
  76           RAM and the RTC (real time clock) chip.  Say Y to enable support for
  77           this device; you should do so if your machine is one of those
  78           mentioned above.
  79
  80 config ADB_PMU_LED
  81         bool "Support for the Power/iBook front LED"
  82         depends on ADB_PMU
  83         select NEW_LEDS
  84         select LEDS_CLASS
  85         help
  86           Support the front LED on Power/iBooks as a generic LED that can
  87           be triggered by any of the supported triggers. To get the
  88           behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
  89           and the disk LED trigger and configure appropriately through sysfs.
  90
  91 config ADB_PMU_LED_DISK
  92         bool "Use front LED as DISK LED by default"
  93         depends on ADB_PMU_LED
  94         depends on LEDS_CLASS
  95         select LEDS_TRIGGERS
  96         select LEDS_TRIGGER_DISK
  97         help
  98           This option makes the front LED default to the disk trigger
  99           so that it blinks on disk activity.
 100
 101 config PMAC_SMU
 102         bool "Support for SMU  based PowerMacs"
 103         depends on PPC_PMAC64
 104         help
 105           This option adds support for the newer G5 iMacs and PowerMacs based
 106           on the "SMU" system control chip which replaces the old PMU.
 107           If you don't know, say Y.
 108
 109 config PMAC_APM_EMU
 110         tristate "APM emulation"
 111         select APM_EMULATION
 112         depends on ADB_PMU && PM && PPC32
 113
 114 config PMAC_MEDIABAY
 115         bool "Support PowerBook hotswap media bay"
 116         depends on PPC_PMAC && PPC32 && BLOCK
 117         help
 118           This option adds support for older PowerBook's hotswap media bay
 119           that can contains batteries, floppy drives, or IDE devices. PCI
 120           devices are not fully supported in the bay as I never had one to
 121           try with
 122
 123 config PMAC_BACKLIGHT
 124         bool "Backlight control for LCD screens"
 125         depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
 126         select FB_BACKLIGHT
 127         help
 128           Say Y here to enable Macintosh specific extensions of the generic
 129           backlight code. With this enabled, the brightness keys on older
 130           PowerBooks will be enabled so you can change the screen brightness.
 131           Newer models should use a userspace daemon like pbbuttonsd.
 132
 133 config PMAC_BACKLIGHT_LEGACY
 134         bool "Provide legacy ioctl's on /dev/pmu for the backlight"
 135         depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
 136         help
 137           Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
 138           programs which use this old interface. New and updated programs
 139           should use the backlight classes in sysfs.
 140
 141 config ADB_MACIO
 142         bool "Include MacIO (CHRP) ADB driver"
 143         depends on ADB && PPC_CHRP && !PPC_PMAC64
 144         help
 145           Say Y here to include direct support for the ADB controller in the
 146           Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
 147           also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
 148           OpenPIC controller and two RS422/Geoports.)
 149
 150 config INPUT_ADBHID
 151         bool "Support for ADB input devices (keyboard, mice, ...)"
 152         depends on ADB && INPUT=y
 153         help
 154           Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
 155           such as keyboards, mice, joysticks, trackpads  or graphic tablets
 156           handled by the input layer.  If you say Y here, make sure to say Y to
 157           the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and
 158           "Event interface support" (CONFIG_INPUT_EVDEV) as well.
 159
 160           If unsure, say Y.
 161
 162 config MAC_EMUMOUSEBTN
 163         tristate "Support for mouse button 2+3 emulation"
 164         depends on SYSCTL && INPUT
 165         help
 166           This provides generic support for emulating the 2nd and 3rd mouse
 167           button with keypresses.  If you say Y here, the emulation is still
 168           disabled by default.  The emulation is controlled by these sysctl
 169           entries:
 170           /proc/sys/dev/mac_hid/mouse_button_emulation
 171           /proc/sys/dev/mac_hid/mouse_button2_keycode
 172           /proc/sys/dev/mac_hid/mouse_button3_keycode
 173
 174           If you have an Apple machine with a 1-button mouse, say Y here.
 175
 176           To compile this driver as a module, choose M here: the
 177           module will be called mac_hid.
 178
 179 config THERM_WINDTUNNEL
 180         tristate "Support for thermal management on Windtunnel G4s"
 181         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 182         help
 183           This driver provides some thermostat and fan control for the desktop
 184           G4 "Windtunnel"
 185
 186 config THERM_ADT746X
 187         tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
 188         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 189         help
 190           This driver provides some thermostat and fan control for the
 191           iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
 192           better fan behaviour by default, and some manual control.
 193
 194 config WINDFARM
 195         tristate "New PowerMac thermal control infrastructure"
 196         depends on PPC
 197
 198 config WINDFARM_PM81
 199         tristate "Support for thermal management on iMac G5"
 200         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 201         select I2C_POWERMAC
 202         help
 203           This driver provides thermal control for the iMacG5
 204
 205 config WINDFARM_PM72
 206         tristate "Support for thermal management on PowerMac G5 (AGP)"
 207         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
 208         select I2C_POWERMAC
 209         help
 210           This driver provides thermal control for the PowerMac G5
 211           "AGP" variants (PowerMac 7,2 and 7,3)
 212
 213 config WINDFARM_RM31
 214         tristate "Support for thermal management on Xserve G5"
 215         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
 216         select I2C_POWERMAC
 217         help
 218           This driver provides thermal control for the Xserve G5
 219           (RackMac3,1)
 220
 221 config WINDFARM_PM91
 222         tristate "Support for thermal management on PowerMac9,1"
 223         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 224         select I2C_POWERMAC
 225         help
 226           This driver provides thermal control for the PowerMac9,1
 227           which is the recent (SMU based) single CPU desktop G5
 228
 229 config WINDFARM_PM112
 230         tristate "Support for thermal management on PowerMac11,2"
 231         depends on WINDFARM && I2C && PMAC_SMU
 232         select I2C_POWERMAC
 233         help
 234           This driver provides thermal control for the PowerMac11,2
 235           which are the recent dual and quad G5 machines using the
 236           970MP dual-core processor.
 237
 238 config WINDFARM_PM121
 239         tristate "Support for thermal management on PowerMac12,1"
 240         depends on WINDFARM && I2C && PMAC_SMU
 241         select I2C_POWERMAC
 242         help
 243           This driver provides thermal control for the PowerMac12,1
 244           which is the iMac G5 (iSight).
 245
 246 config ANSLCD
 247         tristate "Support for ANS LCD display"
 248         depends on ADB_CUDA && PPC_PMAC
 249
 250 config PMAC_RACKMETER
 251         tristate "Support for Apple XServe front panel LEDs"
 252         depends on PPC_PMAC
 253         help
 254           This driver provides some support to control the front panel
 255           blue LEDs "vu-meter" of the XServer macs.
 256
 257 config SENSORS_AMS
 258         tristate "Apple Motion Sensor driver"
 259         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C)
 260         select INPUT_POLLDEV
 261         help
 262           Support for the motion sensor included in PowerBooks. Includes
 263           implementations for PMU and I2C.
 264
 265           This driver can also be built as a module. If so, the module
 266           will be called ams.
 267
 268 config SENSORS_AMS_PMU
 269         bool "PMU variant"
 270         depends on SENSORS_AMS && ADB_PMU
 271         default y
 272         help
 273           PMU variant of motion sensor, found in late 2005 PowerBooks.
 274
 275 config SENSORS_AMS_I2C
 276         bool "I2C variant"
 277         depends on SENSORS_AMS && I2C
 278         default y
 279         help
 280           I2C variant of motion sensor, found in early 2005 PowerBooks and
 281           iBooks.
 282
 283 endif # MACINTOSH_DRIVERS