2 * raid10.c : Multiple Devices driver for Linux
4 * Copyright (C) 2000-2004 Neil Brown
6 * RAID-10 support for md.
8 * Base on code in raid1.c. See raid1.c for further copyright information.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2, or (at your option)
16 * You should have received a copy of the GNU General Public License
17 * (for example /usr/src/linux/COPYING); if not, write to the Free
18 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 #include <linux/slab.h>
22 #include <linux/delay.h>
23 #include <linux/blkdev.h>
24 #include <linux/module.h>
25 #include <linux/seq_file.h>
26 #include <linux/ratelimit.h>
27 #include <linux/kthread.h>
34 * RAID10 provides a combination of RAID0 and RAID1 functionality.
35 * The layout of data is defined by
38 * near_copies (stored in low byte of layout)
39 * far_copies (stored in second byte of layout)
40 * far_offset (stored in bit 16 of layout )
41 * use_far_sets (stored in bit 17 of layout )
43 * The data to be stored is divided into chunks using chunksize. Each device
44 * is divided into far_copies sections. In each section, chunks are laid out
45 * in a style similar to raid0, but near_copies copies of each chunk is stored
46 * (each on a different drive). The starting device for each section is offset
47 * near_copies from the starting device of the previous section. Thus there
48 * are (near_copies * far_copies) of each chunk, and each is on a different
49 * drive. near_copies and far_copies must be at least one, and their product
50 * is at most raid_disks.
52 * If far_offset is true, then the far_copies are handled a bit differently.
53 * The copies are still in different stripes, but instead of being very far
54 * apart on disk, there are adjacent stripes.
56 * The far and offset algorithms are handled slightly differently if
57 * 'use_far_sets' is true. In this case, the array's devices are grouped into
58 * sets that are (near_copies * far_copies) in size. The far copied stripes
59 * are still shifted by 'near_copies' devices, but this shifting stays confined
60 * to the set rather than the entire array. This is done to improve the number
61 * of device combinations that can fail without causing the array to fail.
62 * Example 'far' algorithm w/o 'use_far_sets' (each letter represents a chunk
67 * Example 'far' algorithm w/ 'use_far_sets' enabled (sets illustrated w/ []'s):
68 * [A B] [C D] [A B] [C D E]
69 * |...| |...| |...| | ... |
70 * [B A] [D C] [B A] [E C D]
74 * Number of guaranteed r10bios in case of extreme VM load:
76 #define NR_RAID10_BIOS 256
78 /* when we get a read error on a read-only array, we redirect to another
79 * device without failing the first device, or trying to over-write to
80 * correct the read error. To keep track of bad blocks on a per-bio
81 * level, we store IO_BLOCKED in the appropriate 'bios' pointer
83 #define IO_BLOCKED ((struct bio *)1)
84 /* When we successfully write to a known bad-block, we need to remove the
85 * bad-block marking which must be done from process context. So we record
86 * the success by setting devs[n].bio to IO_MADE_GOOD
88 #define IO_MADE_GOOD ((struct bio *)2)
90 #define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
92 /* When there are this many requests queued to be written by
93 * the raid10 thread, we become 'congested' to provide back-pressure
96 static int max_queued_requests
= 1024;
98 static void allow_barrier(struct r10conf
*conf
);
99 static void lower_barrier(struct r10conf
*conf
);
100 static int enough(struct r10conf
*conf
, int ignore
);
101 static sector_t
reshape_request(struct mddev
*mddev
, sector_t sector_nr
,
103 static void reshape_request_write(struct mddev
*mddev
, struct r10bio
*r10_bio
);
104 static void end_reshape_write(struct bio
*bio
, int error
);
105 static void end_reshape(struct r10conf
*conf
);
107 static void * r10bio_pool_alloc(gfp_t gfp_flags
, void *data
)
109 struct r10conf
*conf
= data
;
110 int size
= offsetof(struct r10bio
, devs
[conf
->copies
]);
112 /* allocate a r10bio with room for raid_disks entries in the
114 return kzalloc(size
, gfp_flags
);
117 static void r10bio_pool_free(void *r10_bio
, void *data
)
122 /* Maximum size of each resync request */
123 #define RESYNC_BLOCK_SIZE (64*1024)
124 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
125 /* amount of memory to reserve for resync requests */
126 #define RESYNC_WINDOW (1024*1024)
127 /* maximum number of concurrent requests, memory permitting */
128 #define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
131 * When performing a resync, we need to read and compare, so
132 * we need as many pages are there are copies.
133 * When performing a recovery, we need 2 bios, one for read,
134 * one for write (we recover only one drive per r10buf)
137 static void * r10buf_pool_alloc(gfp_t gfp_flags
, void *data
)
139 struct r10conf
*conf
= data
;
141 struct r10bio
*r10_bio
;
146 r10_bio
= r10bio_pool_alloc(gfp_flags
, conf
);
150 if (test_bit(MD_RECOVERY_SYNC
, &conf
->mddev
->recovery
) ||
151 test_bit(MD_RECOVERY_RESHAPE
, &conf
->mddev
->recovery
))
152 nalloc
= conf
->copies
; /* resync */
154 nalloc
= 2; /* recovery */
159 for (j
= nalloc
; j
-- ; ) {
160 bio
= bio_kmalloc(gfp_flags
, RESYNC_PAGES
);
163 r10_bio
->devs
[j
].bio
= bio
;
164 if (!conf
->have_replacement
)
166 bio
= bio_kmalloc(gfp_flags
, RESYNC_PAGES
);
169 r10_bio
->devs
[j
].repl_bio
= bio
;
172 * Allocate RESYNC_PAGES data pages and attach them
175 for (j
= 0 ; j
< nalloc
; j
++) {
176 struct bio
*rbio
= r10_bio
->devs
[j
].repl_bio
;
177 bio
= r10_bio
->devs
[j
].bio
;
178 for (i
= 0; i
< RESYNC_PAGES
; i
++) {
179 if (j
> 0 && !test_bit(MD_RECOVERY_SYNC
,
180 &conf
->mddev
->recovery
)) {
181 /* we can share bv_page's during recovery
183 struct bio
*rbio
= r10_bio
->devs
[0].bio
;
184 page
= rbio
->bi_io_vec
[i
].bv_page
;
187 page
= alloc_page(gfp_flags
);
191 bio
->bi_io_vec
[i
].bv_page
= page
;
193 rbio
->bi_io_vec
[i
].bv_page
= page
;
201 safe_put_page(bio
->bi_io_vec
[i
-1].bv_page
);
203 for (i
= 0; i
< RESYNC_PAGES
; i
++)
204 safe_put_page(r10_bio
->devs
[j
].bio
->bi_io_vec
[i
].bv_page
);
207 for ( ; j
< nalloc
; j
++) {
208 if (r10_bio
->devs
[j
].bio
)
209 bio_put(r10_bio
->devs
[j
].bio
);
210 if (r10_bio
->devs
[j
].repl_bio
)
211 bio_put(r10_bio
->devs
[j
].repl_bio
);
213 r10bio_pool_free(r10_bio
, conf
);
217 static void r10buf_pool_free(void *__r10_bio
, void *data
)
220 struct r10conf
*conf
= data
;
221 struct r10bio
*r10bio
= __r10_bio
;
224 for (j
=0; j
< conf
->copies
; j
++) {
225 struct bio
*bio
= r10bio
->devs
[j
].bio
;
227 for (i
= 0; i
< RESYNC_PAGES
; i
++) {
228 safe_put_page(bio
->bi_io_vec
[i
].bv_page
);
229 bio
->bi_io_vec
[i
].bv_page
= NULL
;
233 bio
= r10bio
->devs
[j
].repl_bio
;
237 r10bio_pool_free(r10bio
, conf
);
240 static void put_all_bios(struct r10conf
*conf
, struct r10bio
*r10_bio
)
244 for (i
= 0; i
< conf
->copies
; i
++) {
245 struct bio
**bio
= & r10_bio
->devs
[i
].bio
;
246 if (!BIO_SPECIAL(*bio
))
249 bio
= &r10_bio
->devs
[i
].repl_bio
;
250 if (r10_bio
->read_slot
< 0 && !BIO_SPECIAL(*bio
))
256 static void free_r10bio(struct r10bio
*r10_bio
)
258 struct r10conf
*conf
= r10_bio
->mddev
->private;
260 put_all_bios(conf
, r10_bio
);
261 mempool_free(r10_bio
, conf
->r10bio_pool
);
264 static void put_buf(struct r10bio
*r10_bio
)
266 struct r10conf
*conf
= r10_bio
->mddev
->private;
268 mempool_free(r10_bio
, conf
->r10buf_pool
);
273 static void reschedule_retry(struct r10bio
*r10_bio
)
276 struct mddev
*mddev
= r10_bio
->mddev
;
277 struct r10conf
*conf
= mddev
->private;
279 spin_lock_irqsave(&conf
->device_lock
, flags
);
280 list_add(&r10_bio
->retry_list
, &conf
->retry_list
);
282 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
284 /* wake up frozen array... */
285 wake_up(&conf
->wait_barrier
);
287 md_wakeup_thread(mddev
->thread
);
291 * raid_end_bio_io() is called when we have finished servicing a mirrored
292 * operation and are ready to return a success/failure code to the buffer
295 static void raid_end_bio_io(struct r10bio
*r10_bio
)
297 struct bio
*bio
= r10_bio
->master_bio
;
299 struct r10conf
*conf
= r10_bio
->mddev
->private;
301 if (bio
->bi_phys_segments
) {
303 spin_lock_irqsave(&conf
->device_lock
, flags
);
304 bio
->bi_phys_segments
--;
305 done
= (bio
->bi_phys_segments
== 0);
306 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
309 if (!test_bit(R10BIO_Uptodate
, &r10_bio
->state
))
310 clear_bit(BIO_UPTODATE
, &bio
->bi_flags
);
314 * Wake up any possible resync thread that waits for the device
319 free_r10bio(r10_bio
);
323 * Update disk head position estimator based on IRQ completion info.
325 static inline void update_head_pos(int slot
, struct r10bio
*r10_bio
)
327 struct r10conf
*conf
= r10_bio
->mddev
->private;
329 conf
->mirrors
[r10_bio
->devs
[slot
].devnum
].head_position
=
330 r10_bio
->devs
[slot
].addr
+ (r10_bio
->sectors
);
334 * Find the disk number which triggered given bio
336 static int find_bio_disk(struct r10conf
*conf
, struct r10bio
*r10_bio
,
337 struct bio
*bio
, int *slotp
, int *replp
)
342 for (slot
= 0; slot
< conf
->copies
; slot
++) {
343 if (r10_bio
->devs
[slot
].bio
== bio
)
345 if (r10_bio
->devs
[slot
].repl_bio
== bio
) {
351 BUG_ON(slot
== conf
->copies
);
352 update_head_pos(slot
, r10_bio
);
358 return r10_bio
->devs
[slot
].devnum
;
361 static void raid10_end_read_request(struct bio
*bio
, int error
)
363 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
364 struct r10bio
*r10_bio
= bio
->bi_private
;
366 struct md_rdev
*rdev
;
367 struct r10conf
*conf
= r10_bio
->mddev
->private;
370 slot
= r10_bio
->read_slot
;
371 dev
= r10_bio
->devs
[slot
].devnum
;
372 rdev
= r10_bio
->devs
[slot
].rdev
;
374 * this branch is our 'one mirror IO has finished' event handler:
376 update_head_pos(slot
, r10_bio
);
380 * Set R10BIO_Uptodate in our master bio, so that
381 * we will return a good error code to the higher
382 * levels even if IO on some other mirrored buffer fails.
384 * The 'master' represents the composite IO operation to
385 * user-side. So if something waits for IO, then it will
386 * wait for the 'master' bio.
388 set_bit(R10BIO_Uptodate
, &r10_bio
->state
);
390 /* If all other devices that store this block have
391 * failed, we want to return the error upwards rather
392 * than fail the last device. Here we redefine
393 * "uptodate" to mean "Don't want to retry"
396 spin_lock_irqsave(&conf
->device_lock
, flags
);
397 if (!enough(conf
, rdev
->raid_disk
))
399 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
402 raid_end_bio_io(r10_bio
);
403 rdev_dec_pending(rdev
, conf
->mddev
);
406 * oops, read error - keep the refcount on the rdev
408 char b
[BDEVNAME_SIZE
];
409 printk_ratelimited(KERN_ERR
410 "md/raid10:%s: %s: rescheduling sector %llu\n",
412 bdevname(rdev
->bdev
, b
),
413 (unsigned long long)r10_bio
->sector
);
414 set_bit(R10BIO_ReadError
, &r10_bio
->state
);
415 reschedule_retry(r10_bio
);
419 static void close_write(struct r10bio
*r10_bio
)
421 /* clear the bitmap if all writes complete successfully */
422 bitmap_endwrite(r10_bio
->mddev
->bitmap
, r10_bio
->sector
,
424 !test_bit(R10BIO_Degraded
, &r10_bio
->state
),
426 md_write_end(r10_bio
->mddev
);
429 static void one_write_done(struct r10bio
*r10_bio
)
431 if (atomic_dec_and_test(&r10_bio
->remaining
)) {
432 if (test_bit(R10BIO_WriteError
, &r10_bio
->state
))
433 reschedule_retry(r10_bio
);
435 close_write(r10_bio
);
436 if (test_bit(R10BIO_MadeGood
, &r10_bio
->state
))
437 reschedule_retry(r10_bio
);
439 raid_end_bio_io(r10_bio
);
444 static void raid10_end_write_request(struct bio
*bio
, int error
)
446 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
447 struct r10bio
*r10_bio
= bio
->bi_private
;
450 struct r10conf
*conf
= r10_bio
->mddev
->private;
452 struct md_rdev
*rdev
= NULL
;
454 dev
= find_bio_disk(conf
, r10_bio
, bio
, &slot
, &repl
);
457 rdev
= conf
->mirrors
[dev
].replacement
;
461 rdev
= conf
->mirrors
[dev
].rdev
;
464 * this branch is our 'one mirror IO has finished' event handler:
468 /* Never record new bad blocks to replacement,
471 md_error(rdev
->mddev
, rdev
);
473 set_bit(WriteErrorSeen
, &rdev
->flags
);
474 if (!test_and_set_bit(WantReplacement
, &rdev
->flags
))
475 set_bit(MD_RECOVERY_NEEDED
,
476 &rdev
->mddev
->recovery
);
477 set_bit(R10BIO_WriteError
, &r10_bio
->state
);
482 * Set R10BIO_Uptodate in our master bio, so that
483 * we will return a good error code for to the higher
484 * levels even if IO on some other mirrored buffer fails.
486 * The 'master' represents the composite IO operation to
487 * user-side. So if something waits for IO, then it will
488 * wait for the 'master' bio.
494 * Do not set R10BIO_Uptodate if the current device is
495 * rebuilding or Faulty. This is because we cannot use
496 * such device for properly reading the data back (we could
497 * potentially use it, if the current write would have felt
498 * before rdev->recovery_offset, but for simplicity we don't
501 if (test_bit(In_sync
, &rdev
->flags
) &&
502 !test_bit(Faulty
, &rdev
->flags
))
503 set_bit(R10BIO_Uptodate
, &r10_bio
->state
);
505 /* Maybe we can clear some bad blocks. */
506 if (is_badblock(rdev
,
507 r10_bio
->devs
[slot
].addr
,
509 &first_bad
, &bad_sectors
)) {
512 r10_bio
->devs
[slot
].repl_bio
= IO_MADE_GOOD
;
514 r10_bio
->devs
[slot
].bio
= IO_MADE_GOOD
;
516 set_bit(R10BIO_MadeGood
, &r10_bio
->state
);
522 * Let's see if all mirrored write operations have finished
525 one_write_done(r10_bio
);
527 rdev_dec_pending(rdev
, conf
->mddev
);
531 * RAID10 layout manager
532 * As well as the chunksize and raid_disks count, there are two
533 * parameters: near_copies and far_copies.
534 * near_copies * far_copies must be <= raid_disks.
535 * Normally one of these will be 1.
536 * If both are 1, we get raid0.
537 * If near_copies == raid_disks, we get raid1.
539 * Chunks are laid out in raid0 style with near_copies copies of the
540 * first chunk, followed by near_copies copies of the next chunk and
542 * If far_copies > 1, then after 1/far_copies of the array has been assigned
543 * as described above, we start again with a device offset of near_copies.
544 * So we effectively have another copy of the whole array further down all
545 * the drives, but with blocks on different drives.
546 * With this layout, and block is never stored twice on the one device.
548 * raid10_find_phys finds the sector offset of a given virtual sector
549 * on each device that it is on.
551 * raid10_find_virt does the reverse mapping, from a device and a
552 * sector offset to a virtual address
555 static void __raid10_find_phys(struct geom
*geo
, struct r10bio
*r10bio
)
563 int last_far_set_start
, last_far_set_size
;
565 last_far_set_start
= (geo
->raid_disks
/ geo
->far_set_size
) - 1;
566 last_far_set_start
*= geo
->far_set_size
;
568 last_far_set_size
= geo
->far_set_size
;
569 last_far_set_size
+= (geo
->raid_disks
% geo
->far_set_size
);
571 /* now calculate first sector/dev */
572 chunk
= r10bio
->sector
>> geo
->chunk_shift
;
573 sector
= r10bio
->sector
& geo
->chunk_mask
;
575 chunk
*= geo
->near_copies
;
577 dev
= sector_div(stripe
, geo
->raid_disks
);
579 stripe
*= geo
->far_copies
;
581 sector
+= stripe
<< geo
->chunk_shift
;
583 /* and calculate all the others */
584 for (n
= 0; n
< geo
->near_copies
; n
++) {
588 r10bio
->devs
[slot
].devnum
= d
;
589 r10bio
->devs
[slot
].addr
= s
;
592 for (f
= 1; f
< geo
->far_copies
; f
++) {
593 set
= d
/ geo
->far_set_size
;
594 d
+= geo
->near_copies
;
596 if ((geo
->raid_disks
% geo
->far_set_size
) &&
597 (d
> last_far_set_start
)) {
598 d
-= last_far_set_start
;
599 d
%= last_far_set_size
;
600 d
+= last_far_set_start
;
602 d
%= geo
->far_set_size
;
603 d
+= geo
->far_set_size
* set
;
606 r10bio
->devs
[slot
].devnum
= d
;
607 r10bio
->devs
[slot
].addr
= s
;
611 if (dev
>= geo
->raid_disks
) {
613 sector
+= (geo
->chunk_mask
+ 1);
618 static void raid10_find_phys(struct r10conf
*conf
, struct r10bio
*r10bio
)
620 struct geom
*geo
= &conf
->geo
;
622 if (conf
->reshape_progress
!= MaxSector
&&
623 ((r10bio
->sector
>= conf
->reshape_progress
) !=
624 conf
->mddev
->reshape_backwards
)) {
625 set_bit(R10BIO_Previous
, &r10bio
->state
);
628 clear_bit(R10BIO_Previous
, &r10bio
->state
);
630 __raid10_find_phys(geo
, r10bio
);
633 static sector_t
raid10_find_virt(struct r10conf
*conf
, sector_t sector
, int dev
)
635 sector_t offset
, chunk
, vchunk
;
636 /* Never use conf->prev as this is only called during resync
637 * or recovery, so reshape isn't happening
639 struct geom
*geo
= &conf
->geo
;
640 int far_set_start
= (dev
/ geo
->far_set_size
) * geo
->far_set_size
;
641 int far_set_size
= geo
->far_set_size
;
642 int last_far_set_start
;
644 if (geo
->raid_disks
% geo
->far_set_size
) {
645 last_far_set_start
= (geo
->raid_disks
/ geo
->far_set_size
) - 1;
646 last_far_set_start
*= geo
->far_set_size
;
648 if (dev
>= last_far_set_start
) {
649 far_set_size
= geo
->far_set_size
;
650 far_set_size
+= (geo
->raid_disks
% geo
->far_set_size
);
651 far_set_start
= last_far_set_start
;
655 offset
= sector
& geo
->chunk_mask
;
656 if (geo
->far_offset
) {
658 chunk
= sector
>> geo
->chunk_shift
;
659 fc
= sector_div(chunk
, geo
->far_copies
);
660 dev
-= fc
* geo
->near_copies
;
661 if (dev
< far_set_start
)
664 while (sector
>= geo
->stride
) {
665 sector
-= geo
->stride
;
666 if (dev
< (geo
->near_copies
+ far_set_start
))
667 dev
+= far_set_size
- geo
->near_copies
;
669 dev
-= geo
->near_copies
;
671 chunk
= sector
>> geo
->chunk_shift
;
673 vchunk
= chunk
* geo
->raid_disks
+ dev
;
674 sector_div(vchunk
, geo
->near_copies
);
675 return (vchunk
<< geo
->chunk_shift
) + offset
;
679 * raid10_mergeable_bvec -- tell bio layer if a two requests can be merged
681 * @bvm: properties of new bio
682 * @biovec: the request that could be merged to it.
684 * Return amount of bytes we can accept at this offset
685 * This requires checking for end-of-chunk if near_copies != raid_disks,
686 * and for subordinate merge_bvec_fns if merge_check_needed.
688 static int raid10_mergeable_bvec(struct request_queue
*q
,
689 struct bvec_merge_data
*bvm
,
690 struct bio_vec
*biovec
)
692 struct mddev
*mddev
= q
->queuedata
;
693 struct r10conf
*conf
= mddev
->private;
694 sector_t sector
= bvm
->bi_sector
+ get_start_sect(bvm
->bi_bdev
);
696 unsigned int chunk_sectors
;
697 unsigned int bio_sectors
= bvm
->bi_size
>> 9;
698 struct geom
*geo
= &conf
->geo
;
700 chunk_sectors
= (conf
->geo
.chunk_mask
& conf
->prev
.chunk_mask
) + 1;
701 if (conf
->reshape_progress
!= MaxSector
&&
702 ((sector
>= conf
->reshape_progress
) !=
703 conf
->mddev
->reshape_backwards
))
706 if (geo
->near_copies
< geo
->raid_disks
) {
707 max
= (chunk_sectors
- ((sector
& (chunk_sectors
- 1))
708 + bio_sectors
)) << 9;
710 /* bio_add cannot handle a negative return */
712 if (max
<= biovec
->bv_len
&& bio_sectors
== 0)
713 return biovec
->bv_len
;
715 max
= biovec
->bv_len
;
717 if (mddev
->merge_check_needed
) {
719 struct r10bio r10_bio
;
720 struct r10dev devs
[conf
->copies
];
722 struct r10bio
*r10_bio
= &on_stack
.r10_bio
;
724 if (conf
->reshape_progress
!= MaxSector
) {
725 /* Cannot give any guidance during reshape */
726 if (max
<= biovec
->bv_len
&& bio_sectors
== 0)
727 return biovec
->bv_len
;
730 r10_bio
->sector
= sector
;
731 raid10_find_phys(conf
, r10_bio
);
733 for (s
= 0; s
< conf
->copies
; s
++) {
734 int disk
= r10_bio
->devs
[s
].devnum
;
735 struct md_rdev
*rdev
= rcu_dereference(
736 conf
->mirrors
[disk
].rdev
);
737 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
)) {
738 struct request_queue
*q
=
739 bdev_get_queue(rdev
->bdev
);
740 if (q
->merge_bvec_fn
) {
741 bvm
->bi_sector
= r10_bio
->devs
[s
].addr
743 bvm
->bi_bdev
= rdev
->bdev
;
744 max
= min(max
, q
->merge_bvec_fn(
748 rdev
= rcu_dereference(conf
->mirrors
[disk
].replacement
);
749 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
)) {
750 struct request_queue
*q
=
751 bdev_get_queue(rdev
->bdev
);
752 if (q
->merge_bvec_fn
) {
753 bvm
->bi_sector
= r10_bio
->devs
[s
].addr
755 bvm
->bi_bdev
= rdev
->bdev
;
756 max
= min(max
, q
->merge_bvec_fn(
767 * This routine returns the disk from which the requested read should
768 * be done. There is a per-array 'next expected sequential IO' sector
769 * number - if this matches on the next IO then we use the last disk.
770 * There is also a per-disk 'last know head position' sector that is
771 * maintained from IRQ contexts, both the normal and the resync IO
772 * completion handlers update this position correctly. If there is no
773 * perfect sequential match then we pick the disk whose head is closest.
775 * If there are 2 mirrors in the same 2 devices, performance degrades
776 * because position is mirror, not device based.
778 * The rdev for the device selected will have nr_pending incremented.
782 * FIXME: possibly should rethink readbalancing and do it differently
783 * depending on near_copies / far_copies geometry.
785 static struct md_rdev
*read_balance(struct r10conf
*conf
,
786 struct r10bio
*r10_bio
,
789 const sector_t this_sector
= r10_bio
->sector
;
791 int sectors
= r10_bio
->sectors
;
792 int best_good_sectors
;
793 sector_t new_distance
, best_dist
;
794 struct md_rdev
*best_rdev
, *rdev
= NULL
;
797 struct geom
*geo
= &conf
->geo
;
799 raid10_find_phys(conf
, r10_bio
);
802 sectors
= r10_bio
->sectors
;
805 best_dist
= MaxSector
;
806 best_good_sectors
= 0;
809 * Check if we can balance. We can balance on the whole
810 * device if no resync is going on (recovery is ok), or below
811 * the resync window. We take the first readable disk when
812 * above the resync window.
814 if (conf
->mddev
->recovery_cp
< MaxSector
815 && (this_sector
+ sectors
>= conf
->next_resync
))
818 for (slot
= 0; slot
< conf
->copies
; slot
++) {
823 if (r10_bio
->devs
[slot
].bio
== IO_BLOCKED
)
825 disk
= r10_bio
->devs
[slot
].devnum
;
826 rdev
= rcu_dereference(conf
->mirrors
[disk
].replacement
);
827 if (rdev
== NULL
|| test_bit(Faulty
, &rdev
->flags
) ||
828 test_bit(Unmerged
, &rdev
->flags
) ||
829 r10_bio
->devs
[slot
].addr
+ sectors
> rdev
->recovery_offset
)
830 rdev
= rcu_dereference(conf
->mirrors
[disk
].rdev
);
832 test_bit(Faulty
, &rdev
->flags
) ||
833 test_bit(Unmerged
, &rdev
->flags
))
835 if (!test_bit(In_sync
, &rdev
->flags
) &&
836 r10_bio
->devs
[slot
].addr
+ sectors
> rdev
->recovery_offset
)
839 dev_sector
= r10_bio
->devs
[slot
].addr
;
840 if (is_badblock(rdev
, dev_sector
, sectors
,
841 &first_bad
, &bad_sectors
)) {
842 if (best_dist
< MaxSector
)
843 /* Already have a better slot */
845 if (first_bad
<= dev_sector
) {
846 /* Cannot read here. If this is the
847 * 'primary' device, then we must not read
848 * beyond 'bad_sectors' from another device.
850 bad_sectors
-= (dev_sector
- first_bad
);
851 if (!do_balance
&& sectors
> bad_sectors
)
852 sectors
= bad_sectors
;
853 if (best_good_sectors
> sectors
)
854 best_good_sectors
= sectors
;
856 sector_t good_sectors
=
857 first_bad
- dev_sector
;
858 if (good_sectors
> best_good_sectors
) {
859 best_good_sectors
= good_sectors
;
864 /* Must read from here */
869 best_good_sectors
= sectors
;
874 /* This optimisation is debatable, and completely destroys
875 * sequential read speed for 'far copies' arrays. So only
876 * keep it for 'near' arrays, and review those later.
878 if (geo
->near_copies
> 1 && !atomic_read(&rdev
->nr_pending
))
881 /* for far > 1 always use the lowest address */
882 if (geo
->far_copies
> 1)
883 new_distance
= r10_bio
->devs
[slot
].addr
;
885 new_distance
= abs(r10_bio
->devs
[slot
].addr
-
886 conf
->mirrors
[disk
].head_position
);
887 if (new_distance
< best_dist
) {
888 best_dist
= new_distance
;
893 if (slot
>= conf
->copies
) {
899 atomic_inc(&rdev
->nr_pending
);
900 if (test_bit(Faulty
, &rdev
->flags
)) {
901 /* Cannot risk returning a device that failed
902 * before we inc'ed nr_pending
904 rdev_dec_pending(rdev
, conf
->mddev
);
907 r10_bio
->read_slot
= slot
;
911 *max_sectors
= best_good_sectors
;
916 int md_raid10_congested(struct mddev
*mddev
, int bits
)
918 struct r10conf
*conf
= mddev
->private;
921 if ((bits
& (1 << BDI_async_congested
)) &&
922 conf
->pending_count
>= max_queued_requests
)
927 (i
< conf
->geo
.raid_disks
|| i
< conf
->prev
.raid_disks
)
930 struct md_rdev
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
931 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
)) {
932 struct request_queue
*q
= bdev_get_queue(rdev
->bdev
);
934 ret
|= bdi_congested(&q
->backing_dev_info
, bits
);
940 EXPORT_SYMBOL_GPL(md_raid10_congested
);
942 static int raid10_congested(void *data
, int bits
)
944 struct mddev
*mddev
= data
;
946 return mddev_congested(mddev
, bits
) ||
947 md_raid10_congested(mddev
, bits
);
950 static void flush_pending_writes(struct r10conf
*conf
)
952 /* Any writes that have been queued but are awaiting
953 * bitmap updates get flushed here.
955 spin_lock_irq(&conf
->device_lock
);
957 if (conf
->pending_bio_list
.head
) {
959 bio
= bio_list_get(&conf
->pending_bio_list
);
960 conf
->pending_count
= 0;
961 spin_unlock_irq(&conf
->device_lock
);
962 /* flush any pending bitmap writes to disk
963 * before proceeding w/ I/O */
964 bitmap_unplug(conf
->mddev
->bitmap
);
965 wake_up(&conf
->wait_barrier
);
967 while (bio
) { /* submit pending writes */
968 struct bio
*next
= bio
->bi_next
;
970 if (unlikely((bio
->bi_rw
& REQ_DISCARD
) &&
971 !blk_queue_discard(bdev_get_queue(bio
->bi_bdev
))))
975 generic_make_request(bio
);
979 spin_unlock_irq(&conf
->device_lock
);
983 * Sometimes we need to suspend IO while we do something else,
984 * either some resync/recovery, or reconfigure the array.
985 * To do this we raise a 'barrier'.
986 * The 'barrier' is a counter that can be raised multiple times
987 * to count how many activities are happening which preclude
989 * We can only raise the barrier if there is no pending IO.
990 * i.e. if nr_pending == 0.
991 * We choose only to raise the barrier if no-one is waiting for the
992 * barrier to go down. This means that as soon as an IO request
993 * is ready, no other operations which require a barrier will start
994 * until the IO request has had a chance.
996 * So: regular IO calls 'wait_barrier'. When that returns there
997 * is no backgroup IO happening, It must arrange to call
998 * allow_barrier when it has finished its IO.
999 * backgroup IO calls must call raise_barrier. Once that returns
1000 * there is no normal IO happeing. It must arrange to call
1001 * lower_barrier when the particular background IO completes.
1004 static void raise_barrier(struct r10conf
*conf
, int force
)
1006 BUG_ON(force
&& !conf
->barrier
);
1007 spin_lock_irq(&conf
->resync_lock
);
1009 /* Wait until no block IO is waiting (unless 'force') */
1010 wait_event_lock_irq(conf
->wait_barrier
, force
|| !conf
->nr_waiting
,
1013 /* block any new IO from starting */
1016 /* Now wait for all pending IO to complete */
1017 wait_event_lock_irq(conf
->wait_barrier
,
1018 !conf
->nr_pending
&& conf
->barrier
< RESYNC_DEPTH
,
1021 spin_unlock_irq(&conf
->resync_lock
);
1024 static void lower_barrier(struct r10conf
*conf
)
1026 unsigned long flags
;
1027 spin_lock_irqsave(&conf
->resync_lock
, flags
);
1029 spin_unlock_irqrestore(&conf
->resync_lock
, flags
);
1030 wake_up(&conf
->wait_barrier
);
1033 static void wait_barrier(struct r10conf
*conf
)
1035 spin_lock_irq(&conf
->resync_lock
);
1036 if (conf
->barrier
) {
1038 /* Wait for the barrier to drop.
1039 * However if there are already pending
1040 * requests (preventing the barrier from
1041 * rising completely), and the
1042 * pre-process bio queue isn't empty,
1043 * then don't wait, as we need to empty
1044 * that queue to get the nr_pending
1047 wait_event_lock_irq(conf
->wait_barrier
,
1049 (conf
->nr_pending
&&
1050 current
->bio_list
&&
1051 !bio_list_empty(current
->bio_list
)),
1056 spin_unlock_irq(&conf
->resync_lock
);
1059 static void allow_barrier(struct r10conf
*conf
)
1061 unsigned long flags
;
1062 spin_lock_irqsave(&conf
->resync_lock
, flags
);
1064 spin_unlock_irqrestore(&conf
->resync_lock
, flags
);
1065 wake_up(&conf
->wait_barrier
);
1068 static void freeze_array(struct r10conf
*conf
, int extra
)
1070 /* stop syncio and normal IO and wait for everything to
1072 * We increment barrier and nr_waiting, and then
1073 * wait until nr_pending match nr_queued+extra
1074 * This is called in the context of one normal IO request
1075 * that has failed. Thus any sync request that might be pending
1076 * will be blocked by nr_pending, and we need to wait for
1077 * pending IO requests to complete or be queued for re-try.
1078 * Thus the number queued (nr_queued) plus this request (extra)
1079 * must match the number of pending IOs (nr_pending) before
1082 spin_lock_irq(&conf
->resync_lock
);
1085 wait_event_lock_irq_cmd(conf
->wait_barrier
,
1086 conf
->nr_pending
== conf
->nr_queued
+extra
,
1088 flush_pending_writes(conf
));
1090 spin_unlock_irq(&conf
->resync_lock
);
1093 static void unfreeze_array(struct r10conf
*conf
)
1095 /* reverse the effect of the freeze */
1096 spin_lock_irq(&conf
->resync_lock
);
1099 wake_up(&conf
->wait_barrier
);
1100 spin_unlock_irq(&conf
->resync_lock
);
1103 static sector_t
choose_data_offset(struct r10bio
*r10_bio
,
1104 struct md_rdev
*rdev
)
1106 if (!test_bit(MD_RECOVERY_RESHAPE
, &rdev
->mddev
->recovery
) ||
1107 test_bit(R10BIO_Previous
, &r10_bio
->state
))
1108 return rdev
->data_offset
;
1110 return rdev
->new_data_offset
;
1113 struct raid10_plug_cb
{
1114 struct blk_plug_cb cb
;
1115 struct bio_list pending
;
1119 static void raid10_unplug(struct blk_plug_cb
*cb
, bool from_schedule
)
1121 struct raid10_plug_cb
*plug
= container_of(cb
, struct raid10_plug_cb
,
1123 struct mddev
*mddev
= plug
->cb
.data
;
1124 struct r10conf
*conf
= mddev
->private;
1127 if (from_schedule
|| current
->bio_list
) {
1128 spin_lock_irq(&conf
->device_lock
);
1129 bio_list_merge(&conf
->pending_bio_list
, &plug
->pending
);
1130 conf
->pending_count
+= plug
->pending_cnt
;
1131 spin_unlock_irq(&conf
->device_lock
);
1132 wake_up(&conf
->wait_barrier
);
1133 md_wakeup_thread(mddev
->thread
);
1138 /* we aren't scheduling, so we can do the write-out directly. */
1139 bio
= bio_list_get(&plug
->pending
);
1140 bitmap_unplug(mddev
->bitmap
);
1141 wake_up(&conf
->wait_barrier
);
1143 while (bio
) { /* submit pending writes */
1144 struct bio
*next
= bio
->bi_next
;
1145 bio
->bi_next
= NULL
;
1146 if (unlikely((bio
->bi_rw
& REQ_DISCARD
) &&
1147 !blk_queue_discard(bdev_get_queue(bio
->bi_bdev
))))
1148 /* Just ignore it */
1151 generic_make_request(bio
);
1157 static void make_request(struct mddev
*mddev
, struct bio
* bio
)
1159 struct r10conf
*conf
= mddev
->private;
1160 struct r10bio
*r10_bio
;
1161 struct bio
*read_bio
;
1163 sector_t chunk_mask
= (conf
->geo
.chunk_mask
& conf
->prev
.chunk_mask
);
1164 int chunk_sects
= chunk_mask
+ 1;
1165 const int rw
= bio_data_dir(bio
);
1166 const unsigned long do_sync
= (bio
->bi_rw
& REQ_SYNC
);
1167 const unsigned long do_fua
= (bio
->bi_rw
& REQ_FUA
);
1168 const unsigned long do_discard
= (bio
->bi_rw
1169 & (REQ_DISCARD
| REQ_SECURE
));
1170 const unsigned long do_same
= (bio
->bi_rw
& REQ_WRITE_SAME
);
1171 unsigned long flags
;
1172 struct md_rdev
*blocked_rdev
;
1173 struct blk_plug_cb
*cb
;
1174 struct raid10_plug_cb
*plug
= NULL
;
1175 int sectors_handled
;
1179 if (unlikely(bio
->bi_rw
& REQ_FLUSH
)) {
1180 md_flush_request(mddev
, bio
);
1184 /* If this request crosses a chunk boundary, we need to
1185 * split it. This will only happen for 1 PAGE (or less) requests.
1187 if (unlikely((bio
->bi_sector
& chunk_mask
) + (bio
->bi_size
>> 9)
1189 && (conf
->geo
.near_copies
< conf
->geo
.raid_disks
1190 || conf
->prev
.near_copies
< conf
->prev
.raid_disks
))) {
1191 struct bio_pair
*bp
;
1192 /* Sanity check -- queue functions should prevent this happening */
1193 if ((bio
->bi_vcnt
!= 1 && bio
->bi_vcnt
!= 0) ||
1196 /* This is a one page bio that upper layers
1197 * refuse to split for us, so we need to split it.
1200 chunk_sects
- (bio
->bi_sector
& (chunk_sects
- 1)) );
1202 /* Each of these 'make_request' calls will call 'wait_barrier'.
1203 * If the first succeeds but the second blocks due to the resync
1204 * thread raising the barrier, we will deadlock because the
1205 * IO to the underlying device will be queued in generic_make_request
1206 * and will never complete, so will never reduce nr_pending.
1207 * So increment nr_waiting here so no new raise_barriers will
1208 * succeed, and so the second wait_barrier cannot block.
1210 spin_lock_irq(&conf
->resync_lock
);
1212 spin_unlock_irq(&conf
->resync_lock
);
1214 make_request(mddev
, &bp
->bio1
);
1215 make_request(mddev
, &bp
->bio2
);
1217 spin_lock_irq(&conf
->resync_lock
);
1219 wake_up(&conf
->wait_barrier
);
1220 spin_unlock_irq(&conf
->resync_lock
);
1222 bio_pair_release(bp
);
1225 printk("md/raid10:%s: make_request bug: can't convert block across chunks"
1226 " or bigger than %dk %llu %d\n", mdname(mddev
), chunk_sects
/2,
1227 (unsigned long long)bio
->bi_sector
, bio
->bi_size
>> 10);
1233 md_write_start(mddev
, bio
);
1236 * Register the new request and wait if the reconstruction
1237 * thread has put up a bar for new requests.
1238 * Continue immediately if no resync is active currently.
1242 sectors
= bio
->bi_size
>> 9;
1243 while (test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
) &&
1244 bio
->bi_sector
< conf
->reshape_progress
&&
1245 bio
->bi_sector
+ sectors
> conf
->reshape_progress
) {
1246 /* IO spans the reshape position. Need to wait for
1249 allow_barrier(conf
);
1250 wait_event(conf
->wait_barrier
,
1251 conf
->reshape_progress
<= bio
->bi_sector
||
1252 conf
->reshape_progress
>= bio
->bi_sector
+ sectors
);
1255 if (test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
) &&
1256 bio_data_dir(bio
) == WRITE
&&
1257 (mddev
->reshape_backwards
1258 ? (bio
->bi_sector
< conf
->reshape_safe
&&
1259 bio
->bi_sector
+ sectors
> conf
->reshape_progress
)
1260 : (bio
->bi_sector
+ sectors
> conf
->reshape_safe
&&
1261 bio
->bi_sector
< conf
->reshape_progress
))) {
1262 /* Need to update reshape_position in metadata */
1263 mddev
->reshape_position
= conf
->reshape_progress
;
1264 set_bit(MD_CHANGE_DEVS
, &mddev
->flags
);
1265 set_bit(MD_CHANGE_PENDING
, &mddev
->flags
);
1266 md_wakeup_thread(mddev
->thread
);
1267 wait_event(mddev
->sb_wait
,
1268 !test_bit(MD_CHANGE_PENDING
, &mddev
->flags
));
1270 conf
->reshape_safe
= mddev
->reshape_position
;
1273 r10_bio
= mempool_alloc(conf
->r10bio_pool
, GFP_NOIO
);
1275 r10_bio
->master_bio
= bio
;
1276 r10_bio
->sectors
= sectors
;
1278 r10_bio
->mddev
= mddev
;
1279 r10_bio
->sector
= bio
->bi_sector
;
1282 /* We might need to issue multiple reads to different
1283 * devices if there are bad blocks around, so we keep
1284 * track of the number of reads in bio->bi_phys_segments.
1285 * If this is 0, there is only one r10_bio and no locking
1286 * will be needed when the request completes. If it is
1287 * non-zero, then it is the number of not-completed requests.
1289 bio
->bi_phys_segments
= 0;
1290 clear_bit(BIO_SEG_VALID
, &bio
->bi_flags
);
1294 * read balancing logic:
1296 struct md_rdev
*rdev
;
1300 rdev
= read_balance(conf
, r10_bio
, &max_sectors
);
1302 raid_end_bio_io(r10_bio
);
1305 slot
= r10_bio
->read_slot
;
1307 read_bio
= bio_clone_mddev(bio
, GFP_NOIO
, mddev
);
1308 md_trim_bio(read_bio
, r10_bio
->sector
- bio
->bi_sector
,
1311 r10_bio
->devs
[slot
].bio
= read_bio
;
1312 r10_bio
->devs
[slot
].rdev
= rdev
;
1314 read_bio
->bi_sector
= r10_bio
->devs
[slot
].addr
+
1315 choose_data_offset(r10_bio
, rdev
);
1316 read_bio
->bi_bdev
= rdev
->bdev
;
1317 read_bio
->bi_end_io
= raid10_end_read_request
;
1318 read_bio
->bi_rw
= READ
| do_sync
;
1319 read_bio
->bi_private
= r10_bio
;
1321 if (max_sectors
< r10_bio
->sectors
) {
1322 /* Could not read all from this device, so we will
1323 * need another r10_bio.
1325 sectors_handled
= (r10_bio
->sectors
+ max_sectors
1327 r10_bio
->sectors
= max_sectors
;
1328 spin_lock_irq(&conf
->device_lock
);
1329 if (bio
->bi_phys_segments
== 0)
1330 bio
->bi_phys_segments
= 2;
1332 bio
->bi_phys_segments
++;
1333 spin_unlock(&conf
->device_lock
);
1334 /* Cannot call generic_make_request directly
1335 * as that will be queued in __generic_make_request
1336 * and subsequent mempool_alloc might block
1337 * waiting for it. so hand bio over to raid10d.
1339 reschedule_retry(r10_bio
);
1341 r10_bio
= mempool_alloc(conf
->r10bio_pool
, GFP_NOIO
);
1343 r10_bio
->master_bio
= bio
;
1344 r10_bio
->sectors
= ((bio
->bi_size
>> 9)
1347 r10_bio
->mddev
= mddev
;
1348 r10_bio
->sector
= bio
->bi_sector
+ sectors_handled
;
1351 generic_make_request(read_bio
);
1358 if (conf
->pending_count
>= max_queued_requests
) {
1359 md_wakeup_thread(mddev
->thread
);
1360 wait_event(conf
->wait_barrier
,
1361 conf
->pending_count
< max_queued_requests
);
1363 /* first select target devices under rcu_lock and
1364 * inc refcount on their rdev. Record them by setting
1366 * If there are known/acknowledged bad blocks on any device
1367 * on which we have seen a write error, we want to avoid
1368 * writing to those blocks. This potentially requires several
1369 * writes to write around the bad blocks. Each set of writes
1370 * gets its own r10_bio with a set of bios attached. The number
1371 * of r10_bios is recored in bio->bi_phys_segments just as with
1375 r10_bio
->read_slot
= -1; /* make sure repl_bio gets freed */
1376 raid10_find_phys(conf
, r10_bio
);
1378 blocked_rdev
= NULL
;
1380 max_sectors
= r10_bio
->sectors
;
1382 for (i
= 0; i
< conf
->copies
; i
++) {
1383 int d
= r10_bio
->devs
[i
].devnum
;
1384 struct md_rdev
*rdev
= rcu_dereference(conf
->mirrors
[d
].rdev
);
1385 struct md_rdev
*rrdev
= rcu_dereference(
1386 conf
->mirrors
[d
].replacement
);
1389 if (rdev
&& unlikely(test_bit(Blocked
, &rdev
->flags
))) {
1390 atomic_inc(&rdev
->nr_pending
);
1391 blocked_rdev
= rdev
;
1394 if (rrdev
&& unlikely(test_bit(Blocked
, &rrdev
->flags
))) {
1395 atomic_inc(&rrdev
->nr_pending
);
1396 blocked_rdev
= rrdev
;
1399 if (rdev
&& (test_bit(Faulty
, &rdev
->flags
)
1400 || test_bit(Unmerged
, &rdev
->flags
)))
1402 if (rrdev
&& (test_bit(Faulty
, &rrdev
->flags
)
1403 || test_bit(Unmerged
, &rrdev
->flags
)))
1406 r10_bio
->devs
[i
].bio
= NULL
;
1407 r10_bio
->devs
[i
].repl_bio
= NULL
;
1409 if (!rdev
&& !rrdev
) {
1410 set_bit(R10BIO_Degraded
, &r10_bio
->state
);
1413 if (rdev
&& test_bit(WriteErrorSeen
, &rdev
->flags
)) {
1415 sector_t dev_sector
= r10_bio
->devs
[i
].addr
;
1419 is_bad
= is_badblock(rdev
, dev_sector
,
1421 &first_bad
, &bad_sectors
);
1423 /* Mustn't write here until the bad block
1426 atomic_inc(&rdev
->nr_pending
);
1427 set_bit(BlockedBadBlocks
, &rdev
->flags
);
1428 blocked_rdev
= rdev
;
1431 if (is_bad
&& first_bad
<= dev_sector
) {
1432 /* Cannot write here at all */
1433 bad_sectors
-= (dev_sector
- first_bad
);
1434 if (bad_sectors
< max_sectors
)
1435 /* Mustn't write more than bad_sectors
1436 * to other devices yet
1438 max_sectors
= bad_sectors
;
1439 /* We don't set R10BIO_Degraded as that
1440 * only applies if the disk is missing,
1441 * so it might be re-added, and we want to
1442 * know to recover this chunk.
1443 * In this case the device is here, and the
1444 * fact that this chunk is not in-sync is
1445 * recorded in the bad block log.
1450 int good_sectors
= first_bad
- dev_sector
;
1451 if (good_sectors
< max_sectors
)
1452 max_sectors
= good_sectors
;
1456 r10_bio
->devs
[i
].bio
= bio
;
1457 atomic_inc(&rdev
->nr_pending
);
1460 r10_bio
->devs
[i
].repl_bio
= bio
;
1461 atomic_inc(&rrdev
->nr_pending
);
1466 if (unlikely(blocked_rdev
)) {
1467 /* Have to wait for this device to get unblocked, then retry */
1471 for (j
= 0; j
< i
; j
++) {
1472 if (r10_bio
->devs
[j
].bio
) {
1473 d
= r10_bio
->devs
[j
].devnum
;
1474 rdev_dec_pending(conf
->mirrors
[d
].rdev
, mddev
);
1476 if (r10_bio
->devs
[j
].repl_bio
) {
1477 struct md_rdev
*rdev
;
1478 d
= r10_bio
->devs
[j
].devnum
;
1479 rdev
= conf
->mirrors
[d
].replacement
;
1481 /* Race with remove_disk */
1483 rdev
= conf
->mirrors
[d
].rdev
;
1485 rdev_dec_pending(rdev
, mddev
);
1488 allow_barrier(conf
);
1489 md_wait_for_blocked_rdev(blocked_rdev
, mddev
);
1494 if (max_sectors
< r10_bio
->sectors
) {
1495 /* We are splitting this into multiple parts, so
1496 * we need to prepare for allocating another r10_bio.
1498 r10_bio
->sectors
= max_sectors
;
1499 spin_lock_irq(&conf
->device_lock
);
1500 if (bio
->bi_phys_segments
== 0)
1501 bio
->bi_phys_segments
= 2;
1503 bio
->bi_phys_segments
++;
1504 spin_unlock_irq(&conf
->device_lock
);
1506 sectors_handled
= r10_bio
->sector
+ max_sectors
- bio
->bi_sector
;
1508 atomic_set(&r10_bio
->remaining
, 1);
1509 bitmap_startwrite(mddev
->bitmap
, r10_bio
->sector
, r10_bio
->sectors
, 0);
1511 for (i
= 0; i
< conf
->copies
; i
++) {
1513 int d
= r10_bio
->devs
[i
].devnum
;
1514 if (r10_bio
->devs
[i
].bio
) {
1515 struct md_rdev
*rdev
= conf
->mirrors
[d
].rdev
;
1516 mbio
= bio_clone_mddev(bio
, GFP_NOIO
, mddev
);
1517 md_trim_bio(mbio
, r10_bio
->sector
- bio
->bi_sector
,
1519 r10_bio
->devs
[i
].bio
= mbio
;
1521 mbio
->bi_sector
= (r10_bio
->devs
[i
].addr
+
1522 choose_data_offset(r10_bio
,
1524 mbio
->bi_bdev
= rdev
->bdev
;
1525 mbio
->bi_end_io
= raid10_end_write_request
;
1527 WRITE
| do_sync
| do_fua
| do_discard
| do_same
;
1528 mbio
->bi_private
= r10_bio
;
1530 atomic_inc(&r10_bio
->remaining
);
1532 cb
= blk_check_plugged(raid10_unplug
, mddev
,
1535 plug
= container_of(cb
, struct raid10_plug_cb
,
1539 spin_lock_irqsave(&conf
->device_lock
, flags
);
1541 bio_list_add(&plug
->pending
, mbio
);
1542 plug
->pending_cnt
++;
1544 bio_list_add(&conf
->pending_bio_list
, mbio
);
1545 conf
->pending_count
++;
1547 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1549 md_wakeup_thread(mddev
->thread
);
1552 if (r10_bio
->devs
[i
].repl_bio
) {
1553 struct md_rdev
*rdev
= conf
->mirrors
[d
].replacement
;
1555 /* Replacement just got moved to main 'rdev' */
1557 rdev
= conf
->mirrors
[d
].rdev
;
1559 mbio
= bio_clone_mddev(bio
, GFP_NOIO
, mddev
);
1560 md_trim_bio(mbio
, r10_bio
->sector
- bio
->bi_sector
,
1562 r10_bio
->devs
[i
].repl_bio
= mbio
;
1564 mbio
->bi_sector
= (r10_bio
->devs
[i
].addr
+
1567 mbio
->bi_bdev
= rdev
->bdev
;
1568 mbio
->bi_end_io
= raid10_end_write_request
;
1570 WRITE
| do_sync
| do_fua
| do_discard
| do_same
;
1571 mbio
->bi_private
= r10_bio
;
1573 atomic_inc(&r10_bio
->remaining
);
1574 spin_lock_irqsave(&conf
->device_lock
, flags
);
1575 bio_list_add(&conf
->pending_bio_list
, mbio
);
1576 conf
->pending_count
++;
1577 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1578 if (!mddev_check_plugged(mddev
))
1579 md_wakeup_thread(mddev
->thread
);
1583 /* Don't remove the bias on 'remaining' (one_write_done) until
1584 * after checking if we need to go around again.
1587 if (sectors_handled
< (bio
->bi_size
>> 9)) {
1588 one_write_done(r10_bio
);
1589 /* We need another r10_bio. It has already been counted
1590 * in bio->bi_phys_segments.
1592 r10_bio
= mempool_alloc(conf
->r10bio_pool
, GFP_NOIO
);
1594 r10_bio
->master_bio
= bio
;
1595 r10_bio
->sectors
= (bio
->bi_size
>> 9) - sectors_handled
;
1597 r10_bio
->mddev
= mddev
;
1598 r10_bio
->sector
= bio
->bi_sector
+ sectors_handled
;
1602 one_write_done(r10_bio
);
1604 /* In case raid10d snuck in to freeze_array */
1605 wake_up(&conf
->wait_barrier
);
1608 static void status(struct seq_file
*seq
, struct mddev
*mddev
)
1610 struct r10conf
*conf
= mddev
->private;
1613 if (conf
->geo
.near_copies
< conf
->geo
.raid_disks
)
1614 seq_printf(seq
, " %dK chunks", mddev
->chunk_sectors
/ 2);
1615 if (conf
->geo
.near_copies
> 1)
1616 seq_printf(seq
, " %d near-copies", conf
->geo
.near_copies
);
1617 if (conf
->geo
.far_copies
> 1) {
1618 if (conf
->geo
.far_offset
)
1619 seq_printf(seq
, " %d offset-copies", conf
->geo
.far_copies
);
1621 seq_printf(seq
, " %d far-copies", conf
->geo
.far_copies
);
1623 seq_printf(seq
, " [%d/%d] [", conf
->geo
.raid_disks
,
1624 conf
->geo
.raid_disks
- mddev
->degraded
);
1625 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++)
1626 seq_printf(seq
, "%s",
1627 conf
->mirrors
[i
].rdev
&&
1628 test_bit(In_sync
, &conf
->mirrors
[i
].rdev
->flags
) ? "U" : "_");
1629 seq_printf(seq
, "]");
1632 /* check if there are enough drives for
1633 * every block to appear on atleast one.
1634 * Don't consider the device numbered 'ignore'
1635 * as we might be about to remove it.
1637 static int _enough(struct r10conf
*conf
, struct geom
*geo
, int ignore
)
1642 int n
= conf
->copies
;
1646 if (conf
->mirrors
[this].rdev
&&
1649 this = (this+1) % geo
->raid_disks
;
1653 first
= (first
+ geo
->near_copies
) % geo
->raid_disks
;
1654 } while (first
!= 0);
1658 static int enough(struct r10conf
*conf
, int ignore
)
1660 return _enough(conf
, &conf
->geo
, ignore
) &&
1661 _enough(conf
, &conf
->prev
, ignore
);
1664 static void error(struct mddev
*mddev
, struct md_rdev
*rdev
)
1666 char b
[BDEVNAME_SIZE
];
1667 struct r10conf
*conf
= mddev
->private;
1670 * If it is not operational, then we have already marked it as dead
1671 * else if it is the last working disks, ignore the error, let the
1672 * next level up know.
1673 * else mark the drive as failed
1675 if (test_bit(In_sync
, &rdev
->flags
)
1676 && !enough(conf
, rdev
->raid_disk
))
1678 * Don't fail the drive, just return an IO error.
1681 if (test_and_clear_bit(In_sync
, &rdev
->flags
)) {
1682 unsigned long flags
;
1683 spin_lock_irqsave(&conf
->device_lock
, flags
);
1685 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1687 * if recovery is running, make sure it aborts.
1689 set_bit(MD_RECOVERY_INTR
, &mddev
->recovery
);
1691 set_bit(Blocked
, &rdev
->flags
);
1692 set_bit(Faulty
, &rdev
->flags
);
1693 set_bit(MD_CHANGE_DEVS
, &mddev
->flags
);
1695 "md/raid10:%s: Disk failure on %s, disabling device.\n"
1696 "md/raid10:%s: Operation continuing on %d devices.\n",
1697 mdname(mddev
), bdevname(rdev
->bdev
, b
),
1698 mdname(mddev
), conf
->geo
.raid_disks
- mddev
->degraded
);
1701 static void print_conf(struct r10conf
*conf
)
1704 struct raid10_info
*tmp
;
1706 printk(KERN_DEBUG
"RAID10 conf printout:\n");
1708 printk(KERN_DEBUG
"(!conf)\n");
1711 printk(KERN_DEBUG
" --- wd:%d rd:%d\n", conf
->geo
.raid_disks
- conf
->mddev
->degraded
,
1712 conf
->geo
.raid_disks
);
1714 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++) {
1715 char b
[BDEVNAME_SIZE
];
1716 tmp
= conf
->mirrors
+ i
;
1718 printk(KERN_DEBUG
" disk %d, wo:%d, o:%d, dev:%s\n",
1719 i
, !test_bit(In_sync
, &tmp
->rdev
->flags
),
1720 !test_bit(Faulty
, &tmp
->rdev
->flags
),
1721 bdevname(tmp
->rdev
->bdev
,b
));
1725 static void close_sync(struct r10conf
*conf
)
1728 allow_barrier(conf
);
1730 mempool_destroy(conf
->r10buf_pool
);
1731 conf
->r10buf_pool
= NULL
;
1734 static int raid10_spare_active(struct mddev
*mddev
)
1737 struct r10conf
*conf
= mddev
->private;
1738 struct raid10_info
*tmp
;
1740 unsigned long flags
;
1743 * Find all non-in_sync disks within the RAID10 configuration
1744 * and mark them in_sync
1746 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++) {
1747 tmp
= conf
->mirrors
+ i
;
1748 if (tmp
->replacement
1749 && tmp
->replacement
->recovery_offset
== MaxSector
1750 && !test_bit(Faulty
, &tmp
->replacement
->flags
)
1751 && !test_and_set_bit(In_sync
, &tmp
->replacement
->flags
)) {
1752 /* Replacement has just become active */
1754 || !test_and_clear_bit(In_sync
, &tmp
->rdev
->flags
))
1757 /* Replaced device not technically faulty,
1758 * but we need to be sure it gets removed
1759 * and never re-added.
1761 set_bit(Faulty
, &tmp
->rdev
->flags
);
1762 sysfs_notify_dirent_safe(
1763 tmp
->rdev
->sysfs_state
);
1765 sysfs_notify_dirent_safe(tmp
->replacement
->sysfs_state
);
1766 } else if (tmp
->rdev
1767 && !test_bit(Faulty
, &tmp
->rdev
->flags
)
1768 && !test_and_set_bit(In_sync
, &tmp
->rdev
->flags
)) {
1770 sysfs_notify_dirent_safe(tmp
->rdev
->sysfs_state
);
1773 spin_lock_irqsave(&conf
->device_lock
, flags
);
1774 mddev
->degraded
-= count
;
1775 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1782 static int raid10_add_disk(struct mddev
*mddev
, struct md_rdev
*rdev
)
1784 struct r10conf
*conf
= mddev
->private;
1788 int last
= conf
->geo
.raid_disks
- 1;
1789 struct request_queue
*q
= bdev_get_queue(rdev
->bdev
);
1791 if (mddev
->recovery_cp
< MaxSector
)
1792 /* only hot-add to in-sync arrays, as recovery is
1793 * very different from resync
1796 if (rdev
->saved_raid_disk
< 0 && !_enough(conf
, &conf
->prev
, -1))
1799 if (rdev
->raid_disk
>= 0)
1800 first
= last
= rdev
->raid_disk
;
1802 if (q
->merge_bvec_fn
) {
1803 set_bit(Unmerged
, &rdev
->flags
);
1804 mddev
->merge_check_needed
= 1;
1807 if (rdev
->saved_raid_disk
>= first
&&
1808 conf
->mirrors
[rdev
->saved_raid_disk
].rdev
== NULL
)
1809 mirror
= rdev
->saved_raid_disk
;
1812 for ( ; mirror
<= last
; mirror
++) {
1813 struct raid10_info
*p
= &conf
->mirrors
[mirror
];
1814 if (p
->recovery_disabled
== mddev
->recovery_disabled
)
1817 if (!test_bit(WantReplacement
, &p
->rdev
->flags
) ||
1818 p
->replacement
!= NULL
)
1820 clear_bit(In_sync
, &rdev
->flags
);
1821 set_bit(Replacement
, &rdev
->flags
);
1822 rdev
->raid_disk
= mirror
;
1824 disk_stack_limits(mddev
->gendisk
, rdev
->bdev
,
1825 rdev
->data_offset
<< 9);
1827 rcu_assign_pointer(p
->replacement
, rdev
);
1831 disk_stack_limits(mddev
->gendisk
, rdev
->bdev
,
1832 rdev
->data_offset
<< 9);
1834 p
->head_position
= 0;
1835 p
->recovery_disabled
= mddev
->recovery_disabled
- 1;
1836 rdev
->raid_disk
= mirror
;
1838 if (rdev
->saved_raid_disk
!= mirror
)
1840 rcu_assign_pointer(p
->rdev
, rdev
);
1843 if (err
== 0 && test_bit(Unmerged
, &rdev
->flags
)) {
1844 /* Some requests might not have seen this new
1845 * merge_bvec_fn. We must wait for them to complete
1846 * before merging the device fully.
1847 * First we make sure any code which has tested
1848 * our function has submitted the request, then
1849 * we wait for all outstanding requests to complete.
1851 synchronize_sched();
1852 freeze_array(conf
, 0);
1853 unfreeze_array(conf
);
1854 clear_bit(Unmerged
, &rdev
->flags
);
1856 md_integrity_add_rdev(rdev
, mddev
);
1857 if (mddev
->queue
&& blk_queue_discard(bdev_get_queue(rdev
->bdev
)))
1858 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD
, mddev
->queue
);
1864 static int raid10_remove_disk(struct mddev
*mddev
, struct md_rdev
*rdev
)
1866 struct r10conf
*conf
= mddev
->private;
1868 int number
= rdev
->raid_disk
;
1869 struct md_rdev
**rdevp
;
1870 struct raid10_info
*p
= conf
->mirrors
+ number
;
1873 if (rdev
== p
->rdev
)
1875 else if (rdev
== p
->replacement
)
1876 rdevp
= &p
->replacement
;
1880 if (test_bit(In_sync
, &rdev
->flags
) ||
1881 atomic_read(&rdev
->nr_pending
)) {
1885 /* Only remove faulty devices if recovery
1888 if (!test_bit(Faulty
, &rdev
->flags
) &&
1889 mddev
->recovery_disabled
!= p
->recovery_disabled
&&
1890 (!p
->replacement
|| p
->replacement
== rdev
) &&
1891 number
< conf
->geo
.raid_disks
&&
1898 if (atomic_read(&rdev
->nr_pending
)) {
1899 /* lost the race, try later */
1903 } else if (p
->replacement
) {
1904 /* We must have just cleared 'rdev' */
1905 p
->rdev
= p
->replacement
;
1906 clear_bit(Replacement
, &p
->replacement
->flags
);
1907 smp_mb(); /* Make sure other CPUs may see both as identical
1908 * but will never see neither -- if they are careful.
1910 p
->replacement
= NULL
;
1911 clear_bit(WantReplacement
, &rdev
->flags
);
1913 /* We might have just remove the Replacement as faulty
1914 * Clear the flag just in case
1916 clear_bit(WantReplacement
, &rdev
->flags
);
1918 err
= md_integrity_register(mddev
);
1927 static void end_sync_read(struct bio
*bio
, int error
)
1929 struct r10bio
*r10_bio
= bio
->bi_private
;
1930 struct r10conf
*conf
= r10_bio
->mddev
->private;
1933 if (bio
== r10_bio
->master_bio
) {
1934 /* this is a reshape read */
1935 d
= r10_bio
->read_slot
; /* really the read dev */
1937 d
= find_bio_disk(conf
, r10_bio
, bio
, NULL
, NULL
);
1939 if (test_bit(BIO_UPTODATE
, &bio
->bi_flags
))
1940 set_bit(R10BIO_Uptodate
, &r10_bio
->state
);
1942 /* The write handler will notice the lack of
1943 * R10BIO_Uptodate and record any errors etc
1945 atomic_add(r10_bio
->sectors
,
1946 &conf
->mirrors
[d
].rdev
->corrected_errors
);
1948 /* for reconstruct, we always reschedule after a read.
1949 * for resync, only after all reads
1951 rdev_dec_pending(conf
->mirrors
[d
].rdev
, conf
->mddev
);
1952 if (test_bit(R10BIO_IsRecover
, &r10_bio
->state
) ||
1953 atomic_dec_and_test(&r10_bio
->remaining
)) {
1954 /* we have read all the blocks,
1955 * do the comparison in process context in raid10d
1957 reschedule_retry(r10_bio
);
1961 static void end_sync_request(struct r10bio
*r10_bio
)
1963 struct mddev
*mddev
= r10_bio
->mddev
;
1965 while (atomic_dec_and_test(&r10_bio
->remaining
)) {
1966 if (r10_bio
->master_bio
== NULL
) {
1967 /* the primary of several recovery bios */
1968 sector_t s
= r10_bio
->sectors
;
1969 if (test_bit(R10BIO_MadeGood
, &r10_bio
->state
) ||
1970 test_bit(R10BIO_WriteError
, &r10_bio
->state
))
1971 reschedule_retry(r10_bio
);
1974 md_done_sync(mddev
, s
, 1);
1977 struct r10bio
*r10_bio2
= (struct r10bio
*)r10_bio
->master_bio
;
1978 if (test_bit(R10BIO_MadeGood
, &r10_bio
->state
) ||
1979 test_bit(R10BIO_WriteError
, &r10_bio
->state
))
1980 reschedule_retry(r10_bio
);
1988 static void end_sync_write(struct bio
*bio
, int error
)
1990 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
1991 struct r10bio
*r10_bio
= bio
->bi_private
;
1992 struct mddev
*mddev
= r10_bio
->mddev
;
1993 struct r10conf
*conf
= mddev
->private;
1999 struct md_rdev
*rdev
= NULL
;
2001 d
= find_bio_disk(conf
, r10_bio
, bio
, &slot
, &repl
);
2003 rdev
= conf
->mirrors
[d
].replacement
;
2005 rdev
= conf
->mirrors
[d
].rdev
;
2009 md_error(mddev
, rdev
);
2011 set_bit(WriteErrorSeen
, &rdev
->flags
);
2012 if (!test_and_set_bit(WantReplacement
, &rdev
->flags
))
2013 set_bit(MD_RECOVERY_NEEDED
,
2014 &rdev
->mddev
->recovery
);
2015 set_bit(R10BIO_WriteError
, &r10_bio
->state
);
2017 } else if (is_badblock(rdev
,
2018 r10_bio
->devs
[slot
].addr
,
2020 &first_bad
, &bad_sectors
))
2021 set_bit(R10BIO_MadeGood
, &r10_bio
->state
);
2023 rdev_dec_pending(rdev
, mddev
);
2025 end_sync_request(r10_bio
);
2029 * Note: sync and recover and handled very differently for raid10
2030 * This code is for resync.
2031 * For resync, we read through virtual addresses and read all blocks.
2032 * If there is any error, we schedule a write. The lowest numbered
2033 * drive is authoritative.
2034 * However requests come for physical address, so we need to map.
2035 * For every physical address there are raid_disks/copies virtual addresses,
2036 * which is always are least one, but is not necessarly an integer.
2037 * This means that a physical address can span multiple chunks, so we may
2038 * have to submit multiple io requests for a single sync request.
2041 * We check if all blocks are in-sync and only write to blocks that
2044 static void sync_request_write(struct mddev
*mddev
, struct r10bio
*r10_bio
)
2046 struct r10conf
*conf
= mddev
->private;
2048 struct bio
*tbio
, *fbio
;
2051 atomic_set(&r10_bio
->remaining
, 1);
2053 /* find the first device with a block */
2054 for (i
=0; i
<conf
->copies
; i
++)
2055 if (test_bit(BIO_UPTODATE
, &r10_bio
->devs
[i
].bio
->bi_flags
))
2058 if (i
== conf
->copies
)
2062 fbio
= r10_bio
->devs
[i
].bio
;
2064 vcnt
= (r10_bio
->sectors
+ (PAGE_SIZE
>> 9) - 1) >> (PAGE_SHIFT
- 9);
2065 /* now find blocks with errors */
2066 for (i
=0 ; i
< conf
->copies
; i
++) {
2069 tbio
= r10_bio
->devs
[i
].bio
;
2071 if (tbio
->bi_end_io
!= end_sync_read
)
2075 if (test_bit(BIO_UPTODATE
, &r10_bio
->devs
[i
].bio
->bi_flags
)) {
2076 /* We know that the bi_io_vec layout is the same for
2077 * both 'first' and 'i', so we just compare them.
2078 * All vec entries are PAGE_SIZE;
2080 for (j
= 0; j
< vcnt
; j
++)
2081 if (memcmp(page_address(fbio
->bi_io_vec
[j
].bv_page
),
2082 page_address(tbio
->bi_io_vec
[j
].bv_page
),
2083 fbio
->bi_io_vec
[j
].bv_len
))
2087 atomic64_add(r10_bio
->sectors
, &mddev
->resync_mismatches
);
2088 if (test_bit(MD_RECOVERY_CHECK
, &mddev
->recovery
))
2089 /* Don't fix anything. */
2092 /* Ok, we need to write this bio, either to correct an
2093 * inconsistency or to correct an unreadable block.
2094 * First we need to fixup bv_offset, bv_len and
2095 * bi_vecs, as the read request might have corrupted these
2097 tbio
->bi_vcnt
= vcnt
;
2098 tbio
->bi_size
= r10_bio
->sectors
<< 9;
2100 tbio
->bi_phys_segments
= 0;
2101 tbio
->bi_flags
&= ~(BIO_POOL_MASK
- 1);
2102 tbio
->bi_flags
|= 1 << BIO_UPTODATE
;
2103 tbio
->bi_next
= NULL
;
2104 tbio
->bi_rw
= WRITE
;
2105 tbio
->bi_private
= r10_bio
;
2106 tbio
->bi_sector
= r10_bio
->devs
[i
].addr
;
2108 for (j
=0; j
< vcnt
; j
++) {
2109 tbio
->bi_io_vec
[j
].bv_offset
= 0;
2110 tbio
->bi_io_vec
[j
].bv_len
= PAGE_SIZE
;
2112 memcpy(page_address(tbio
->bi_io_vec
[j
].bv_page
),
2113 page_address(fbio
->bi_io_vec
[j
].bv_page
),
2116 tbio
->bi_end_io
= end_sync_write
;
2118 d
= r10_bio
->devs
[i
].devnum
;
2119 atomic_inc(&conf
->mirrors
[d
].rdev
->nr_pending
);
2120 atomic_inc(&r10_bio
->remaining
);
2121 md_sync_acct(conf
->mirrors
[d
].rdev
->bdev
, tbio
->bi_size
>> 9);
2123 tbio
->bi_sector
+= conf
->mirrors
[d
].rdev
->data_offset
;
2124 tbio
->bi_bdev
= conf
->mirrors
[d
].rdev
->bdev
;
2125 generic_make_request(tbio
);
2128 /* Now write out to any replacement devices
2131 for (i
= 0; i
< conf
->copies
; i
++) {
2134 tbio
= r10_bio
->devs
[i
].repl_bio
;
2135 if (!tbio
|| !tbio
->bi_end_io
)
2137 if (r10_bio
->devs
[i
].bio
->bi_end_io
!= end_sync_write
2138 && r10_bio
->devs
[i
].bio
!= fbio
)
2139 for (j
= 0; j
< vcnt
; j
++)
2140 memcpy(page_address(tbio
->bi_io_vec
[j
].bv_page
),
2141 page_address(fbio
->bi_io_vec
[j
].bv_page
),
2143 d
= r10_bio
->devs
[i
].devnum
;
2144 atomic_inc(&r10_bio
->remaining
);
2145 md_sync_acct(conf
->mirrors
[d
].replacement
->bdev
,
2146 tbio
->bi_size
>> 9);
2147 generic_make_request(tbio
);
2151 if (atomic_dec_and_test(&r10_bio
->remaining
)) {
2152 md_done_sync(mddev
, r10_bio
->sectors
, 1);
2158 * Now for the recovery code.
2159 * Recovery happens across physical sectors.
2160 * We recover all non-is_sync drives by finding the virtual address of
2161 * each, and then choose a working drive that also has that virt address.
2162 * There is a separate r10_bio for each non-in_sync drive.
2163 * Only the first two slots are in use. The first for reading,
2164 * The second for writing.
2167 static void fix_recovery_read_error(struct r10bio
*r10_bio
)
2169 /* We got a read error during recovery.
2170 * We repeat the read in smaller page-sized sections.
2171 * If a read succeeds, write it to the new device or record
2172 * a bad block if we cannot.
2173 * If a read fails, record a bad block on both old and
2176 struct mddev
*mddev
= r10_bio
->mddev
;
2177 struct r10conf
*conf
= mddev
->private;
2178 struct bio
*bio
= r10_bio
->devs
[0].bio
;
2180 int sectors
= r10_bio
->sectors
;
2182 int dr
= r10_bio
->devs
[0].devnum
;
2183 int dw
= r10_bio
->devs
[1].devnum
;
2187 struct md_rdev
*rdev
;
2191 if (s
> (PAGE_SIZE
>>9))
2194 rdev
= conf
->mirrors
[dr
].rdev
;
2195 addr
= r10_bio
->devs
[0].addr
+ sect
,
2196 ok
= sync_page_io(rdev
,
2199 bio
->bi_io_vec
[idx
].bv_page
,
2202 rdev
= conf
->mirrors
[dw
].rdev
;
2203 addr
= r10_bio
->devs
[1].addr
+ sect
;
2204 ok
= sync_page_io(rdev
,
2207 bio
->bi_io_vec
[idx
].bv_page
,
2210 set_bit(WriteErrorSeen
, &rdev
->flags
);
2211 if (!test_and_set_bit(WantReplacement
,
2213 set_bit(MD_RECOVERY_NEEDED
,
2214 &rdev
->mddev
->recovery
);
2218 /* We don't worry if we cannot set a bad block -
2219 * it really is bad so there is no loss in not
2222 rdev_set_badblocks(rdev
, addr
, s
, 0);
2224 if (rdev
!= conf
->mirrors
[dw
].rdev
) {
2225 /* need bad block on destination too */
2226 struct md_rdev
*rdev2
= conf
->mirrors
[dw
].rdev
;
2227 addr
= r10_bio
->devs
[1].addr
+ sect
;
2228 ok
= rdev_set_badblocks(rdev2
, addr
, s
, 0);
2230 /* just abort the recovery */
2232 "md/raid10:%s: recovery aborted"
2233 " due to read error\n",
2236 conf
->mirrors
[dw
].recovery_disabled
2237 = mddev
->recovery_disabled
;
2238 set_bit(MD_RECOVERY_INTR
,
2251 static void recovery_request_write(struct mddev
*mddev
, struct r10bio
*r10_bio
)
2253 struct r10conf
*conf
= mddev
->private;
2255 struct bio
*wbio
, *wbio2
;
2257 if (!test_bit(R10BIO_Uptodate
, &r10_bio
->state
)) {
2258 fix_recovery_read_error(r10_bio
);
2259 end_sync_request(r10_bio
);
2264 * share the pages with the first bio
2265 * and submit the write request
2267 d
= r10_bio
->devs
[1].devnum
;
2268 wbio
= r10_bio
->devs
[1].bio
;
2269 wbio2
= r10_bio
->devs
[1].repl_bio
;
2270 if (wbio
->bi_end_io
) {
2271 atomic_inc(&conf
->mirrors
[d
].rdev
->nr_pending
);
2272 md_sync_acct(conf
->mirrors
[d
].rdev
->bdev
, wbio
->bi_size
>> 9);
2273 generic_make_request(wbio
);
2275 if (wbio2
&& wbio2
->bi_end_io
) {
2276 atomic_inc(&conf
->mirrors
[d
].replacement
->nr_pending
);
2277 md_sync_acct(conf
->mirrors
[d
].replacement
->bdev
,
2278 wbio2
->bi_size
>> 9);
2279 generic_make_request(wbio2
);
2285 * Used by fix_read_error() to decay the per rdev read_errors.
2286 * We halve the read error count for every hour that has elapsed
2287 * since the last recorded read error.
2290 static void check_decay_read_errors(struct mddev
*mddev
, struct md_rdev
*rdev
)
2292 struct timespec cur_time_mon
;
2293 unsigned long hours_since_last
;
2294 unsigned int read_errors
= atomic_read(&rdev
->read_errors
);
2296 ktime_get_ts(&cur_time_mon
);
2298 if (rdev
->last_read_error
.tv_sec
== 0 &&
2299 rdev
->last_read_error
.tv_nsec
== 0) {
2300 /* first time we've seen a read error */
2301 rdev
->last_read_error
= cur_time_mon
;
2305 hours_since_last
= (cur_time_mon
.tv_sec
-
2306 rdev
->last_read_error
.tv_sec
) / 3600;
2308 rdev
->last_read_error
= cur_time_mon
;
2311 * if hours_since_last is > the number of bits in read_errors
2312 * just set read errors to 0. We do this to avoid
2313 * overflowing the shift of read_errors by hours_since_last.
2315 if (hours_since_last
>= 8 * sizeof(read_errors
))
2316 atomic_set(&rdev
->read_errors
, 0);
2318 atomic_set(&rdev
->read_errors
, read_errors
>> hours_since_last
);
2321 static int r10_sync_page_io(struct md_rdev
*rdev
, sector_t sector
,
2322 int sectors
, struct page
*page
, int rw
)
2327 if (is_badblock(rdev
, sector
, sectors
, &first_bad
, &bad_sectors
)
2328 && (rw
== READ
|| test_bit(WriteErrorSeen
, &rdev
->flags
)))
2330 if (sync_page_io(rdev
, sector
, sectors
<< 9, page
, rw
, false))
2334 set_bit(WriteErrorSeen
, &rdev
->flags
);
2335 if (!test_and_set_bit(WantReplacement
, &rdev
->flags
))
2336 set_bit(MD_RECOVERY_NEEDED
,
2337 &rdev
->mddev
->recovery
);
2339 /* need to record an error - either for the block or the device */
2340 if (!rdev_set_badblocks(rdev
, sector
, sectors
, 0))
2341 md_error(rdev
->mddev
, rdev
);
2346 * This is a kernel thread which:
2348 * 1. Retries failed read operations on working mirrors.
2349 * 2. Updates the raid superblock when problems encounter.
2350 * 3. Performs writes following reads for array synchronising.
2353 static void fix_read_error(struct r10conf
*conf
, struct mddev
*mddev
, struct r10bio
*r10_bio
)
2355 int sect
= 0; /* Offset from r10_bio->sector */
2356 int sectors
= r10_bio
->sectors
;
2357 struct md_rdev
*rdev
;
2358 int max_read_errors
= atomic_read(&mddev
->max_corr_read_errors
);
2359 int d
= r10_bio
->devs
[r10_bio
->read_slot
].devnum
;
2361 /* still own a reference to this rdev, so it cannot
2362 * have been cleared recently.
2364 rdev
= conf
->mirrors
[d
].rdev
;
2366 if (test_bit(Faulty
, &rdev
->flags
))
2367 /* drive has already been failed, just ignore any
2368 more fix_read_error() attempts */
2371 check_decay_read_errors(mddev
, rdev
);
2372 atomic_inc(&rdev
->read_errors
);
2373 if (atomic_read(&rdev
->read_errors
) > max_read_errors
) {
2374 char b
[BDEVNAME_SIZE
];
2375 bdevname(rdev
->bdev
, b
);
2378 "md/raid10:%s: %s: Raid device exceeded "
2379 "read_error threshold [cur %d:max %d]\n",
2381 atomic_read(&rdev
->read_errors
), max_read_errors
);
2383 "md/raid10:%s: %s: Failing raid device\n",
2385 md_error(mddev
, conf
->mirrors
[d
].rdev
);
2386 r10_bio
->devs
[r10_bio
->read_slot
].bio
= IO_BLOCKED
;
2392 int sl
= r10_bio
->read_slot
;
2396 if (s
> (PAGE_SIZE
>>9))
2404 d
= r10_bio
->devs
[sl
].devnum
;
2405 rdev
= rcu_dereference(conf
->mirrors
[d
].rdev
);
2407 !test_bit(Unmerged
, &rdev
->flags
) &&
2408 test_bit(In_sync
, &rdev
->flags
) &&
2409 is_badblock(rdev
, r10_bio
->devs
[sl
].addr
+ sect
, s
,
2410 &first_bad
, &bad_sectors
) == 0) {
2411 atomic_inc(&rdev
->nr_pending
);
2413 success
= sync_page_io(rdev
,
2414 r10_bio
->devs
[sl
].addr
+
2417 conf
->tmppage
, READ
, false);
2418 rdev_dec_pending(rdev
, mddev
);
2424 if (sl
== conf
->copies
)
2426 } while (!success
&& sl
!= r10_bio
->read_slot
);
2430 /* Cannot read from anywhere, just mark the block
2431 * as bad on the first device to discourage future
2434 int dn
= r10_bio
->devs
[r10_bio
->read_slot
].devnum
;
2435 rdev
= conf
->mirrors
[dn
].rdev
;
2437 if (!rdev_set_badblocks(
2439 r10_bio
->devs
[r10_bio
->read_slot
].addr
2442 md_error(mddev
, rdev
);
2443 r10_bio
->devs
[r10_bio
->read_slot
].bio
2450 /* write it back and re-read */
2452 while (sl
!= r10_bio
->read_slot
) {
2453 char b
[BDEVNAME_SIZE
];
2458 d
= r10_bio
->devs
[sl
].devnum
;
2459 rdev
= rcu_dereference(conf
->mirrors
[d
].rdev
);
2461 test_bit(Unmerged
, &rdev
->flags
) ||
2462 !test_bit(In_sync
, &rdev
->flags
))
2465 atomic_inc(&rdev
->nr_pending
);
2467 if (r10_sync_page_io(rdev
,
2468 r10_bio
->devs
[sl
].addr
+
2470 s
, conf
->tmppage
, WRITE
)
2472 /* Well, this device is dead */
2474 "md/raid10:%s: read correction "
2476 " (%d sectors at %llu on %s)\n",
2478 (unsigned long long)(
2480 choose_data_offset(r10_bio
,
2482 bdevname(rdev
->bdev
, b
));
2483 printk(KERN_NOTICE
"md/raid10:%s: %s: failing "
2486 bdevname(rdev
->bdev
, b
));
2488 rdev_dec_pending(rdev
, mddev
);
2492 while (sl
!= r10_bio
->read_slot
) {
2493 char b
[BDEVNAME_SIZE
];
2498 d
= r10_bio
->devs
[sl
].devnum
;
2499 rdev
= rcu_dereference(conf
->mirrors
[d
].rdev
);
2501 !test_bit(In_sync
, &rdev
->flags
))
2504 atomic_inc(&rdev
->nr_pending
);
2506 switch (r10_sync_page_io(rdev
,
2507 r10_bio
->devs
[sl
].addr
+
2512 /* Well, this device is dead */
2514 "md/raid10:%s: unable to read back "
2516 " (%d sectors at %llu on %s)\n",
2518 (unsigned long long)(
2520 choose_data_offset(r10_bio
, rdev
)),
2521 bdevname(rdev
->bdev
, b
));
2522 printk(KERN_NOTICE
"md/raid10:%s: %s: failing "
2525 bdevname(rdev
->bdev
, b
));
2529 "md/raid10:%s: read error corrected"
2530 " (%d sectors at %llu on %s)\n",
2532 (unsigned long long)(
2534 choose_data_offset(r10_bio
, rdev
)),
2535 bdevname(rdev
->bdev
, b
));
2536 atomic_add(s
, &rdev
->corrected_errors
);
2539 rdev_dec_pending(rdev
, mddev
);
2549 static void bi_complete(struct bio
*bio
, int error
)
2551 complete((struct completion
*)bio
->bi_private
);
2554 static int submit_bio_wait(int rw
, struct bio
*bio
)
2556 struct completion event
;
2559 init_completion(&event
);
2560 bio
->bi_private
= &event
;
2561 bio
->bi_end_io
= bi_complete
;
2562 submit_bio(rw
, bio
);
2563 wait_for_completion(&event
);
2565 return test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
2568 static int narrow_write_error(struct r10bio
*r10_bio
, int i
)
2570 struct bio
*bio
= r10_bio
->master_bio
;
2571 struct mddev
*mddev
= r10_bio
->mddev
;
2572 struct r10conf
*conf
= mddev
->private;
2573 struct md_rdev
*rdev
= conf
->mirrors
[r10_bio
->devs
[i
].devnum
].rdev
;
2574 /* bio has the data to be written to slot 'i' where
2575 * we just recently had a write error.
2576 * We repeatedly clone the bio and trim down to one block,
2577 * then try the write. Where the write fails we record
2579 * It is conceivable that the bio doesn't exactly align with
2580 * blocks. We must handle this.
2582 * We currently own a reference to the rdev.
2588 int sect_to_write
= r10_bio
->sectors
;
2591 if (rdev
->badblocks
.shift
< 0)
2594 block_sectors
= 1 << rdev
->badblocks
.shift
;
2595 sector
= r10_bio
->sector
;
2596 sectors
= ((r10_bio
->sector
+ block_sectors
)
2597 & ~(sector_t
)(block_sectors
- 1))
2600 while (sect_to_write
) {
2602 if (sectors
> sect_to_write
)
2603 sectors
= sect_to_write
;
2604 /* Write at 'sector' for 'sectors' */
2605 wbio
= bio_clone_mddev(bio
, GFP_NOIO
, mddev
);
2606 md_trim_bio(wbio
, sector
- bio
->bi_sector
, sectors
);
2607 wbio
->bi_sector
= (r10_bio
->devs
[i
].addr
+
2608 choose_data_offset(r10_bio
, rdev
) +
2609 (sector
- r10_bio
->sector
));
2610 wbio
->bi_bdev
= rdev
->bdev
;
2611 if (submit_bio_wait(WRITE
, wbio
) == 0)
2613 ok
= rdev_set_badblocks(rdev
, sector
,
2618 sect_to_write
-= sectors
;
2620 sectors
= block_sectors
;
2625 static void handle_read_error(struct mddev
*mddev
, struct r10bio
*r10_bio
)
2627 int slot
= r10_bio
->read_slot
;
2629 struct r10conf
*conf
= mddev
->private;
2630 struct md_rdev
*rdev
= r10_bio
->devs
[slot
].rdev
;
2631 char b
[BDEVNAME_SIZE
];
2632 unsigned long do_sync
;
2635 /* we got a read error. Maybe the drive is bad. Maybe just
2636 * the block and we can fix it.
2637 * We freeze all other IO, and try reading the block from
2638 * other devices. When we find one, we re-write
2639 * and check it that fixes the read error.
2640 * This is all done synchronously while the array is
2643 bio
= r10_bio
->devs
[slot
].bio
;
2644 bdevname(bio
->bi_bdev
, b
);
2646 r10_bio
->devs
[slot
].bio
= NULL
;
2648 if (mddev
->ro
== 0) {
2649 freeze_array(conf
, 1);
2650 fix_read_error(conf
, mddev
, r10_bio
);
2651 unfreeze_array(conf
);
2653 r10_bio
->devs
[slot
].bio
= IO_BLOCKED
;
2655 rdev_dec_pending(rdev
, mddev
);
2658 rdev
= read_balance(conf
, r10_bio
, &max_sectors
);
2660 printk(KERN_ALERT
"md/raid10:%s: %s: unrecoverable I/O"
2661 " read error for block %llu\n",
2663 (unsigned long long)r10_bio
->sector
);
2664 raid_end_bio_io(r10_bio
);
2668 do_sync
= (r10_bio
->master_bio
->bi_rw
& REQ_SYNC
);
2669 slot
= r10_bio
->read_slot
;
2672 "md/raid10:%s: %s: redirecting "
2673 "sector %llu to another mirror\n",
2675 bdevname(rdev
->bdev
, b
),
2676 (unsigned long long)r10_bio
->sector
);
2677 bio
= bio_clone_mddev(r10_bio
->master_bio
,
2680 r10_bio
->sector
- bio
->bi_sector
,
2682 r10_bio
->devs
[slot
].bio
= bio
;
2683 r10_bio
->devs
[slot
].rdev
= rdev
;
2684 bio
->bi_sector
= r10_bio
->devs
[slot
].addr
2685 + choose_data_offset(r10_bio
, rdev
);
2686 bio
->bi_bdev
= rdev
->bdev
;
2687 bio
->bi_rw
= READ
| do_sync
;
2688 bio
->bi_private
= r10_bio
;
2689 bio
->bi_end_io
= raid10_end_read_request
;
2690 if (max_sectors
< r10_bio
->sectors
) {
2691 /* Drat - have to split this up more */
2692 struct bio
*mbio
= r10_bio
->master_bio
;
2693 int sectors_handled
=
2694 r10_bio
->sector
+ max_sectors
2696 r10_bio
->sectors
= max_sectors
;
2697 spin_lock_irq(&conf
->device_lock
);
2698 if (mbio
->bi_phys_segments
== 0)
2699 mbio
->bi_phys_segments
= 2;
2701 mbio
->bi_phys_segments
++;
2702 spin_unlock_irq(&conf
->device_lock
);
2703 generic_make_request(bio
);
2705 r10_bio
= mempool_alloc(conf
->r10bio_pool
,
2707 r10_bio
->master_bio
= mbio
;
2708 r10_bio
->sectors
= (mbio
->bi_size
>> 9)
2711 set_bit(R10BIO_ReadError
,
2713 r10_bio
->mddev
= mddev
;
2714 r10_bio
->sector
= mbio
->bi_sector
2719 generic_make_request(bio
);
2722 static void handle_write_completed(struct r10conf
*conf
, struct r10bio
*r10_bio
)
2724 /* Some sort of write request has finished and it
2725 * succeeded in writing where we thought there was a
2726 * bad block. So forget the bad block.
2727 * Or possibly if failed and we need to record
2731 struct md_rdev
*rdev
;
2733 if (test_bit(R10BIO_IsSync
, &r10_bio
->state
) ||
2734 test_bit(R10BIO_IsRecover
, &r10_bio
->state
)) {
2735 for (m
= 0; m
< conf
->copies
; m
++) {
2736 int dev
= r10_bio
->devs
[m
].devnum
;
2737 rdev
= conf
->mirrors
[dev
].rdev
;
2738 if (r10_bio
->devs
[m
].bio
== NULL
)
2740 if (test_bit(BIO_UPTODATE
,
2741 &r10_bio
->devs
[m
].bio
->bi_flags
)) {
2742 rdev_clear_badblocks(
2744 r10_bio
->devs
[m
].addr
,
2745 r10_bio
->sectors
, 0);
2747 if (!rdev_set_badblocks(
2749 r10_bio
->devs
[m
].addr
,
2750 r10_bio
->sectors
, 0))
2751 md_error(conf
->mddev
, rdev
);
2753 rdev
= conf
->mirrors
[dev
].replacement
;
2754 if (r10_bio
->devs
[m
].repl_bio
== NULL
)
2756 if (test_bit(BIO_UPTODATE
,
2757 &r10_bio
->devs
[m
].repl_bio
->bi_flags
)) {
2758 rdev_clear_badblocks(
2760 r10_bio
->devs
[m
].addr
,
2761 r10_bio
->sectors
, 0);
2763 if (!rdev_set_badblocks(
2765 r10_bio
->devs
[m
].addr
,
2766 r10_bio
->sectors
, 0))
2767 md_error(conf
->mddev
, rdev
);
2772 for (m
= 0; m
< conf
->copies
; m
++) {
2773 int dev
= r10_bio
->devs
[m
].devnum
;
2774 struct bio
*bio
= r10_bio
->devs
[m
].bio
;
2775 rdev
= conf
->mirrors
[dev
].rdev
;
2776 if (bio
== IO_MADE_GOOD
) {
2777 rdev_clear_badblocks(
2779 r10_bio
->devs
[m
].addr
,
2780 r10_bio
->sectors
, 0);
2781 rdev_dec_pending(rdev
, conf
->mddev
);
2782 } else if (bio
!= NULL
&&
2783 !test_bit(BIO_UPTODATE
, &bio
->bi_flags
)) {
2784 if (!narrow_write_error(r10_bio
, m
)) {
2785 md_error(conf
->mddev
, rdev
);
2786 set_bit(R10BIO_Degraded
,
2789 rdev_dec_pending(rdev
, conf
->mddev
);
2791 bio
= r10_bio
->devs
[m
].repl_bio
;
2792 rdev
= conf
->mirrors
[dev
].replacement
;
2793 if (rdev
&& bio
== IO_MADE_GOOD
) {
2794 rdev_clear_badblocks(
2796 r10_bio
->devs
[m
].addr
,
2797 r10_bio
->sectors
, 0);
2798 rdev_dec_pending(rdev
, conf
->mddev
);
2801 if (test_bit(R10BIO_WriteError
,
2803 close_write(r10_bio
);
2804 raid_end_bio_io(r10_bio
);
2808 static void raid10d(struct md_thread
*thread
)
2810 struct mddev
*mddev
= thread
->mddev
;
2811 struct r10bio
*r10_bio
;
2812 unsigned long flags
;
2813 struct r10conf
*conf
= mddev
->private;
2814 struct list_head
*head
= &conf
->retry_list
;
2815 struct blk_plug plug
;
2817 md_check_recovery(mddev
);
2819 blk_start_plug(&plug
);
2822 flush_pending_writes(conf
);
2824 spin_lock_irqsave(&conf
->device_lock
, flags
);
2825 if (list_empty(head
)) {
2826 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
2829 r10_bio
= list_entry(head
->prev
, struct r10bio
, retry_list
);
2830 list_del(head
->prev
);
2832 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
2834 mddev
= r10_bio
->mddev
;
2835 conf
= mddev
->private;
2836 if (test_bit(R10BIO_MadeGood
, &r10_bio
->state
) ||
2837 test_bit(R10BIO_WriteError
, &r10_bio
->state
))
2838 handle_write_completed(conf
, r10_bio
);
2839 else if (test_bit(R10BIO_IsReshape
, &r10_bio
->state
))
2840 reshape_request_write(mddev
, r10_bio
);
2841 else if (test_bit(R10BIO_IsSync
, &r10_bio
->state
))
2842 sync_request_write(mddev
, r10_bio
);
2843 else if (test_bit(R10BIO_IsRecover
, &r10_bio
->state
))
2844 recovery_request_write(mddev
, r10_bio
);
2845 else if (test_bit(R10BIO_ReadError
, &r10_bio
->state
))
2846 handle_read_error(mddev
, r10_bio
);
2848 /* just a partial read to be scheduled from a
2851 int slot
= r10_bio
->read_slot
;
2852 generic_make_request(r10_bio
->devs
[slot
].bio
);
2856 if (mddev
->flags
& ~(1<<MD_CHANGE_PENDING
))
2857 md_check_recovery(mddev
);
2859 blk_finish_plug(&plug
);
2863 static int init_resync(struct r10conf
*conf
)
2868 buffs
= RESYNC_WINDOW
/ RESYNC_BLOCK_SIZE
;
2869 BUG_ON(conf
->r10buf_pool
);
2870 conf
->have_replacement
= 0;
2871 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++)
2872 if (conf
->mirrors
[i
].replacement
)
2873 conf
->have_replacement
= 1;
2874 conf
->r10buf_pool
= mempool_create(buffs
, r10buf_pool_alloc
, r10buf_pool_free
, conf
);
2875 if (!conf
->r10buf_pool
)
2877 conf
->next_resync
= 0;
2882 * perform a "sync" on one "block"
2884 * We need to make sure that no normal I/O request - particularly write
2885 * requests - conflict with active sync requests.
2887 * This is achieved by tracking pending requests and a 'barrier' concept
2888 * that can be installed to exclude normal IO requests.
2890 * Resync and recovery are handled very differently.
2891 * We differentiate by looking at MD_RECOVERY_SYNC in mddev->recovery.
2893 * For resync, we iterate over virtual addresses, read all copies,
2894 * and update if there are differences. If only one copy is live,
2896 * For recovery, we iterate over physical addresses, read a good
2897 * value for each non-in_sync drive, and over-write.
2899 * So, for recovery we may have several outstanding complex requests for a
2900 * given address, one for each out-of-sync device. We model this by allocating
2901 * a number of r10_bio structures, one for each out-of-sync device.
2902 * As we setup these structures, we collect all bio's together into a list
2903 * which we then process collectively to add pages, and then process again
2904 * to pass to generic_make_request.
2906 * The r10_bio structures are linked using a borrowed master_bio pointer.
2907 * This link is counted in ->remaining. When the r10_bio that points to NULL
2908 * has its remaining count decremented to 0, the whole complex operation
2913 static sector_t
sync_request(struct mddev
*mddev
, sector_t sector_nr
,
2914 int *skipped
, int go_faster
)
2916 struct r10conf
*conf
= mddev
->private;
2917 struct r10bio
*r10_bio
;
2918 struct bio
*biolist
= NULL
, *bio
;
2919 sector_t max_sector
, nr_sectors
;
2922 sector_t sync_blocks
;
2923 sector_t sectors_skipped
= 0;
2924 int chunks_skipped
= 0;
2925 sector_t chunk_mask
= conf
->geo
.chunk_mask
;
2927 if (!conf
->r10buf_pool
)
2928 if (init_resync(conf
))
2932 * Allow skipping a full rebuild for incremental assembly
2933 * of a clean array, like RAID1 does.
2935 if (mddev
->bitmap
== NULL
&&
2936 mddev
->recovery_cp
== MaxSector
&&
2937 !test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
) &&
2938 conf
->fullsync
== 0) {
2940 max_sector
= mddev
->dev_sectors
;
2941 if (test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
) ||
2942 test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
))
2943 max_sector
= mddev
->resync_max_sectors
;
2944 return max_sector
- sector_nr
;
2948 max_sector
= mddev
->dev_sectors
;
2949 if (test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
) ||
2950 test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
))
2951 max_sector
= mddev
->resync_max_sectors
;
2952 if (sector_nr
>= max_sector
) {
2953 /* If we aborted, we need to abort the
2954 * sync on the 'current' bitmap chucks (there can
2955 * be several when recovering multiple devices).
2956 * as we may have started syncing it but not finished.
2957 * We can find the current address in
2958 * mddev->curr_resync, but for recovery,
2959 * we need to convert that to several
2960 * virtual addresses.
2962 if (test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
)) {
2967 if (mddev
->curr_resync
< max_sector
) { /* aborted */
2968 if (test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
))
2969 bitmap_end_sync(mddev
->bitmap
, mddev
->curr_resync
,
2971 else for (i
= 0; i
< conf
->geo
.raid_disks
; i
++) {
2973 raid10_find_virt(conf
, mddev
->curr_resync
, i
);
2974 bitmap_end_sync(mddev
->bitmap
, sect
,
2978 /* completed sync */
2979 if ((!mddev
->bitmap
|| conf
->fullsync
)
2980 && conf
->have_replacement
2981 && test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
)) {
2982 /* Completed a full sync so the replacements
2983 * are now fully recovered.
2985 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++)
2986 if (conf
->mirrors
[i
].replacement
)
2987 conf
->mirrors
[i
].replacement
2993 bitmap_close_sync(mddev
->bitmap
);
2996 return sectors_skipped
;
2999 if (test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
))
3000 return reshape_request(mddev
, sector_nr
, skipped
);
3002 if (chunks_skipped
>= conf
->geo
.raid_disks
) {
3003 /* if there has been nothing to do on any drive,
3004 * then there is nothing to do at all..
3007 return (max_sector
- sector_nr
) + sectors_skipped
;
3010 if (max_sector
> mddev
->resync_max
)
3011 max_sector
= mddev
->resync_max
; /* Don't do IO beyond here */
3013 /* make sure whole request will fit in a chunk - if chunks
3016 if (conf
->geo
.near_copies
< conf
->geo
.raid_disks
&&
3017 max_sector
> (sector_nr
| chunk_mask
))
3018 max_sector
= (sector_nr
| chunk_mask
) + 1;
3020 * If there is non-resync activity waiting for us then
3021 * put in a delay to throttle resync.
3023 if (!go_faster
&& conf
->nr_waiting
)
3024 msleep_interruptible(1000);
3026 /* Again, very different code for resync and recovery.
3027 * Both must result in an r10bio with a list of bios that
3028 * have bi_end_io, bi_sector, bi_bdev set,
3029 * and bi_private set to the r10bio.
3030 * For recovery, we may actually create several r10bios
3031 * with 2 bios in each, that correspond to the bios in the main one.
3032 * In this case, the subordinate r10bios link back through a
3033 * borrowed master_bio pointer, and the counter in the master
3034 * includes a ref from each subordinate.
3036 /* First, we decide what to do and set ->bi_end_io
3037 * To end_sync_read if we want to read, and
3038 * end_sync_write if we will want to write.
3041 max_sync
= RESYNC_PAGES
<< (PAGE_SHIFT
-9);
3042 if (!test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
)) {
3043 /* recovery... the complicated one */
3047 for (i
= 0 ; i
< conf
->geo
.raid_disks
; i
++) {
3053 struct raid10_info
*mirror
= &conf
->mirrors
[i
];
3055 if ((mirror
->rdev
== NULL
||
3056 test_bit(In_sync
, &mirror
->rdev
->flags
))
3058 (mirror
->replacement
== NULL
||
3060 &mirror
->replacement
->flags
)))
3064 /* want to reconstruct this device */
3066 sect
= raid10_find_virt(conf
, sector_nr
, i
);
3067 if (sect
>= mddev
->resync_max_sectors
) {
3068 /* last stripe is not complete - don't
3069 * try to recover this sector.
3073 /* Unless we are doing a full sync, or a replacement
3074 * we only need to recover the block if it is set in
3077 must_sync
= bitmap_start_sync(mddev
->bitmap
, sect
,
3079 if (sync_blocks
< max_sync
)
3080 max_sync
= sync_blocks
;
3082 mirror
->replacement
== NULL
&&
3084 /* yep, skip the sync_blocks here, but don't assume
3085 * that there will never be anything to do here
3087 chunks_skipped
= -1;
3091 r10_bio
= mempool_alloc(conf
->r10buf_pool
, GFP_NOIO
);
3092 raise_barrier(conf
, rb2
!= NULL
);
3093 atomic_set(&r10_bio
->remaining
, 0);
3095 r10_bio
->master_bio
= (struct bio
*)rb2
;
3097 atomic_inc(&rb2
->remaining
);
3098 r10_bio
->mddev
= mddev
;
3099 set_bit(R10BIO_IsRecover
, &r10_bio
->state
);
3100 r10_bio
->sector
= sect
;
3102 raid10_find_phys(conf
, r10_bio
);
3104 /* Need to check if the array will still be
3107 for (j
= 0; j
< conf
->geo
.raid_disks
; j
++)
3108 if (conf
->mirrors
[j
].rdev
== NULL
||
3109 test_bit(Faulty
, &conf
->mirrors
[j
].rdev
->flags
)) {
3114 must_sync
= bitmap_start_sync(mddev
->bitmap
, sect
,
3115 &sync_blocks
, still_degraded
);
3118 for (j
=0; j
<conf
->copies
;j
++) {
3120 int d
= r10_bio
->devs
[j
].devnum
;
3121 sector_t from_addr
, to_addr
;
3122 struct md_rdev
*rdev
;
3123 sector_t sector
, first_bad
;
3125 if (!conf
->mirrors
[d
].rdev
||
3126 !test_bit(In_sync
, &conf
->mirrors
[d
].rdev
->flags
))
3128 /* This is where we read from */
3130 rdev
= conf
->mirrors
[d
].rdev
;
3131 sector
= r10_bio
->devs
[j
].addr
;
3133 if (is_badblock(rdev
, sector
, max_sync
,
3134 &first_bad
, &bad_sectors
)) {
3135 if (first_bad
> sector
)
3136 max_sync
= first_bad
- sector
;
3138 bad_sectors
-= (sector
3140 if (max_sync
> bad_sectors
)
3141 max_sync
= bad_sectors
;
3145 bio
= r10_bio
->devs
[0].bio
;
3146 bio
->bi_next
= biolist
;
3148 bio
->bi_private
= r10_bio
;
3149 bio
->bi_end_io
= end_sync_read
;
3151 from_addr
= r10_bio
->devs
[j
].addr
;
3152 bio
->bi_sector
= from_addr
+ rdev
->data_offset
;
3153 bio
->bi_bdev
= rdev
->bdev
;
3154 atomic_inc(&rdev
->nr_pending
);
3155 /* and we write to 'i' (if not in_sync) */
3157 for (k
=0; k
<conf
->copies
; k
++)
3158 if (r10_bio
->devs
[k
].devnum
== i
)
3160 BUG_ON(k
== conf
->copies
);
3161 to_addr
= r10_bio
->devs
[k
].addr
;
3162 r10_bio
->devs
[0].devnum
= d
;
3163 r10_bio
->devs
[0].addr
= from_addr
;
3164 r10_bio
->devs
[1].devnum
= i
;
3165 r10_bio
->devs
[1].addr
= to_addr
;
3167 rdev
= mirror
->rdev
;
3168 if (!test_bit(In_sync
, &rdev
->flags
)) {
3169 bio
= r10_bio
->devs
[1].bio
;
3170 bio
->bi_next
= biolist
;
3172 bio
->bi_private
= r10_bio
;
3173 bio
->bi_end_io
= end_sync_write
;
3175 bio
->bi_sector
= to_addr
3176 + rdev
->data_offset
;
3177 bio
->bi_bdev
= rdev
->bdev
;
3178 atomic_inc(&r10_bio
->remaining
);
3180 r10_bio
->devs
[1].bio
->bi_end_io
= NULL
;
3182 /* and maybe write to replacement */
3183 bio
= r10_bio
->devs
[1].repl_bio
;
3185 bio
->bi_end_io
= NULL
;
3186 rdev
= mirror
->replacement
;
3187 /* Note: if rdev != NULL, then bio
3188 * cannot be NULL as r10buf_pool_alloc will
3189 * have allocated it.
3190 * So the second test here is pointless.
3191 * But it keeps semantic-checkers happy, and
3192 * this comment keeps human reviewers
3195 if (rdev
== NULL
|| bio
== NULL
||
3196 test_bit(Faulty
, &rdev
->flags
))
3198 bio
->bi_next
= biolist
;
3200 bio
->bi_private
= r10_bio
;
3201 bio
->bi_end_io
= end_sync_write
;
3203 bio
->bi_sector
= to_addr
+ rdev
->data_offset
;
3204 bio
->bi_bdev
= rdev
->bdev
;
3205 atomic_inc(&r10_bio
->remaining
);
3208 if (j
== conf
->copies
) {
3209 /* Cannot recover, so abort the recovery or
3210 * record a bad block */
3213 atomic_dec(&rb2
->remaining
);
3216 /* problem is that there are bad blocks
3217 * on other device(s)
3220 for (k
= 0; k
< conf
->copies
; k
++)
3221 if (r10_bio
->devs
[k
].devnum
== i
)
3223 if (!test_bit(In_sync
,
3224 &mirror
->rdev
->flags
)
3225 && !rdev_set_badblocks(
3227 r10_bio
->devs
[k
].addr
,
3230 if (mirror
->replacement
&&
3231 !rdev_set_badblocks(
3232 mirror
->replacement
,
3233 r10_bio
->devs
[k
].addr
,
3238 if (!test_and_set_bit(MD_RECOVERY_INTR
,
3240 printk(KERN_INFO
"md/raid10:%s: insufficient "
3241 "working devices for recovery.\n",
3243 mirror
->recovery_disabled
3244 = mddev
->recovery_disabled
;
3249 if (biolist
== NULL
) {
3251 struct r10bio
*rb2
= r10_bio
;
3252 r10_bio
= (struct r10bio
*) rb2
->master_bio
;
3253 rb2
->master_bio
= NULL
;
3259 /* resync. Schedule a read for every block at this virt offset */
3262 bitmap_cond_end_sync(mddev
->bitmap
, sector_nr
);
3264 if (!bitmap_start_sync(mddev
->bitmap
, sector_nr
,
3265 &sync_blocks
, mddev
->degraded
) &&
3266 !conf
->fullsync
&& !test_bit(MD_RECOVERY_REQUESTED
,
3267 &mddev
->recovery
)) {
3268 /* We can skip this block */
3270 return sync_blocks
+ sectors_skipped
;
3272 if (sync_blocks
< max_sync
)
3273 max_sync
= sync_blocks
;
3274 r10_bio
= mempool_alloc(conf
->r10buf_pool
, GFP_NOIO
);
3276 r10_bio
->mddev
= mddev
;
3277 atomic_set(&r10_bio
->remaining
, 0);
3278 raise_barrier(conf
, 0);
3279 conf
->next_resync
= sector_nr
;
3281 r10_bio
->master_bio
= NULL
;
3282 r10_bio
->sector
= sector_nr
;
3283 set_bit(R10BIO_IsSync
, &r10_bio
->state
);
3284 raid10_find_phys(conf
, r10_bio
);
3285 r10_bio
->sectors
= (sector_nr
| chunk_mask
) - sector_nr
+ 1;
3287 for (i
= 0; i
< conf
->copies
; i
++) {
3288 int d
= r10_bio
->devs
[i
].devnum
;
3289 sector_t first_bad
, sector
;
3292 if (r10_bio
->devs
[i
].repl_bio
)
3293 r10_bio
->devs
[i
].repl_bio
->bi_end_io
= NULL
;
3295 bio
= r10_bio
->devs
[i
].bio
;
3296 bio
->bi_end_io
= NULL
;
3297 clear_bit(BIO_UPTODATE
, &bio
->bi_flags
);
3298 if (conf
->mirrors
[d
].rdev
== NULL
||
3299 test_bit(Faulty
, &conf
->mirrors
[d
].rdev
->flags
))
3301 sector
= r10_bio
->devs
[i
].addr
;
3302 if (is_badblock(conf
->mirrors
[d
].rdev
,
3304 &first_bad
, &bad_sectors
)) {
3305 if (first_bad
> sector
)
3306 max_sync
= first_bad
- sector
;
3308 bad_sectors
-= (sector
- first_bad
);
3309 if (max_sync
> bad_sectors
)
3310 max_sync
= bad_sectors
;
3314 atomic_inc(&conf
->mirrors
[d
].rdev
->nr_pending
);
3315 atomic_inc(&r10_bio
->remaining
);
3316 bio
->bi_next
= biolist
;
3318 bio
->bi_private
= r10_bio
;
3319 bio
->bi_end_io
= end_sync_read
;
3321 bio
->bi_sector
= sector
+
3322 conf
->mirrors
[d
].rdev
->data_offset
;
3323 bio
->bi_bdev
= conf
->mirrors
[d
].rdev
->bdev
;
3326 if (conf
->mirrors
[d
].replacement
== NULL
||
3328 &conf
->mirrors
[d
].replacement
->flags
))
3331 /* Need to set up for writing to the replacement */
3332 bio
= r10_bio
->devs
[i
].repl_bio
;
3333 clear_bit(BIO_UPTODATE
, &bio
->bi_flags
);
3335 sector
= r10_bio
->devs
[i
].addr
;
3336 atomic_inc(&conf
->mirrors
[d
].rdev
->nr_pending
);
3337 bio
->bi_next
= biolist
;
3339 bio
->bi_private
= r10_bio
;
3340 bio
->bi_end_io
= end_sync_write
;
3342 bio
->bi_sector
= sector
+
3343 conf
->mirrors
[d
].replacement
->data_offset
;
3344 bio
->bi_bdev
= conf
->mirrors
[d
].replacement
->bdev
;
3349 for (i
=0; i
<conf
->copies
; i
++) {
3350 int d
= r10_bio
->devs
[i
].devnum
;
3351 if (r10_bio
->devs
[i
].bio
->bi_end_io
)
3352 rdev_dec_pending(conf
->mirrors
[d
].rdev
,
3354 if (r10_bio
->devs
[i
].repl_bio
&&
3355 r10_bio
->devs
[i
].repl_bio
->bi_end_io
)
3357 conf
->mirrors
[d
].replacement
,
3366 for (bio
= biolist
; bio
; bio
=bio
->bi_next
) {
3368 bio
->bi_flags
&= ~(BIO_POOL_MASK
- 1);
3370 bio
->bi_flags
|= 1 << BIO_UPTODATE
;
3373 bio
->bi_phys_segments
= 0;
3378 if (sector_nr
+ max_sync
< max_sector
)
3379 max_sector
= sector_nr
+ max_sync
;
3382 int len
= PAGE_SIZE
;
3383 if (sector_nr
+ (len
>>9) > max_sector
)
3384 len
= (max_sector
- sector_nr
) << 9;
3387 for (bio
= biolist
; bio
; bio
=bio
->bi_next
) {
3389 page
= bio
->bi_io_vec
[bio
->bi_vcnt
].bv_page
;
3390 if (bio_add_page(bio
, page
, len
, 0))
3394 bio
->bi_io_vec
[bio
->bi_vcnt
].bv_page
= page
;
3395 for (bio2
= biolist
;
3396 bio2
&& bio2
!= bio
;
3397 bio2
= bio2
->bi_next
) {
3398 /* remove last page from this bio */
3400 bio2
->bi_size
-= len
;
3401 bio2
->bi_flags
&= ~(1<< BIO_SEG_VALID
);
3405 nr_sectors
+= len
>>9;
3406 sector_nr
+= len
>>9;
3407 } while (biolist
->bi_vcnt
< RESYNC_PAGES
);
3409 r10_bio
->sectors
= nr_sectors
;
3413 biolist
= biolist
->bi_next
;
3415 bio
->bi_next
= NULL
;
3416 r10_bio
= bio
->bi_private
;
3417 r10_bio
->sectors
= nr_sectors
;
3419 if (bio
->bi_end_io
== end_sync_read
) {
3420 md_sync_acct(bio
->bi_bdev
, nr_sectors
);
3421 generic_make_request(bio
);
3425 if (sectors_skipped
)
3426 /* pretend they weren't skipped, it makes
3427 * no important difference in this case
3429 md_done_sync(mddev
, sectors_skipped
, 1);
3431 return sectors_skipped
+ nr_sectors
;
3433 /* There is nowhere to write, so all non-sync
3434 * drives must be failed or in resync, all drives
3435 * have a bad block, so try the next chunk...
3437 if (sector_nr
+ max_sync
< max_sector
)
3438 max_sector
= sector_nr
+ max_sync
;
3440 sectors_skipped
+= (max_sector
- sector_nr
);
3442 sector_nr
= max_sector
;
3447 raid10_size(struct mddev
*mddev
, sector_t sectors
, int raid_disks
)
3450 struct r10conf
*conf
= mddev
->private;
3453 raid_disks
= min(conf
->geo
.raid_disks
,
3454 conf
->prev
.raid_disks
);
3456 sectors
= conf
->dev_sectors
;
3458 size
= sectors
>> conf
->geo
.chunk_shift
;
3459 sector_div(size
, conf
->geo
.far_copies
);
3460 size
= size
* raid_disks
;
3461 sector_div(size
, conf
->geo
.near_copies
);
3463 return size
<< conf
->geo
.chunk_shift
;
3466 static void calc_sectors(struct r10conf
*conf
, sector_t size
)
3468 /* Calculate the number of sectors-per-device that will
3469 * actually be used, and set conf->dev_sectors and
3473 size
= size
>> conf
->geo
.chunk_shift
;
3474 sector_div(size
, conf
->geo
.far_copies
);
3475 size
= size
* conf
->geo
.raid_disks
;
3476 sector_div(size
, conf
->geo
.near_copies
);
3477 /* 'size' is now the number of chunks in the array */
3478 /* calculate "used chunks per device" */
3479 size
= size
* conf
->copies
;
3481 /* We need to round up when dividing by raid_disks to
3482 * get the stride size.
3484 size
= DIV_ROUND_UP_SECTOR_T(size
, conf
->geo
.raid_disks
);
3486 conf
->dev_sectors
= size
<< conf
->geo
.chunk_shift
;
3488 if (conf
->geo
.far_offset
)
3489 conf
->geo
.stride
= 1 << conf
->geo
.chunk_shift
;
3491 sector_div(size
, conf
->geo
.far_copies
);
3492 conf
->geo
.stride
= size
<< conf
->geo
.chunk_shift
;
3496 enum geo_type
{geo_new
, geo_old
, geo_start
};
3497 static int setup_geo(struct geom
*geo
, struct mddev
*mddev
, enum geo_type
new)
3500 int layout
, chunk
, disks
;
3503 layout
= mddev
->layout
;
3504 chunk
= mddev
->chunk_sectors
;
3505 disks
= mddev
->raid_disks
- mddev
->delta_disks
;
3508 layout
= mddev
->new_layout
;
3509 chunk
= mddev
->new_chunk_sectors
;
3510 disks
= mddev
->raid_disks
;
3512 default: /* avoid 'may be unused' warnings */
3513 case geo_start
: /* new when starting reshape - raid_disks not
3515 layout
= mddev
->new_layout
;
3516 chunk
= mddev
->new_chunk_sectors
;
3517 disks
= mddev
->raid_disks
+ mddev
->delta_disks
;
3522 if (chunk
< (PAGE_SIZE
>> 9) ||
3523 !is_power_of_2(chunk
))
3526 fc
= (layout
>> 8) & 255;
3527 fo
= layout
& (1<<16);
3528 geo
->raid_disks
= disks
;
3529 geo
->near_copies
= nc
;
3530 geo
->far_copies
= fc
;
3531 geo
->far_offset
= fo
;
3532 geo
->far_set_size
= (layout
& (1<<17)) ? disks
/ fc
: disks
;
3533 geo
->chunk_mask
= chunk
- 1;
3534 geo
->chunk_shift
= ffz(~chunk
);
3538 static struct r10conf
*setup_conf(struct mddev
*mddev
)
3540 struct r10conf
*conf
= NULL
;
3545 copies
= setup_geo(&geo
, mddev
, geo_new
);
3548 printk(KERN_ERR
"md/raid10:%s: chunk size must be "
3549 "at least PAGE_SIZE(%ld) and be a power of 2.\n",
3550 mdname(mddev
), PAGE_SIZE
);
3554 if (copies
< 2 || copies
> mddev
->raid_disks
) {
3555 printk(KERN_ERR
"md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
3556 mdname(mddev
), mddev
->new_layout
);
3561 conf
= kzalloc(sizeof(struct r10conf
), GFP_KERNEL
);
3565 /* FIXME calc properly */
3566 conf
->mirrors
= kzalloc(sizeof(struct raid10_info
)*(mddev
->raid_disks
+
3567 max(0,mddev
->delta_disks
)),
3572 conf
->tmppage
= alloc_page(GFP_KERNEL
);
3577 conf
->copies
= copies
;
3578 conf
->r10bio_pool
= mempool_create(NR_RAID10_BIOS
, r10bio_pool_alloc
,
3579 r10bio_pool_free
, conf
);
3580 if (!conf
->r10bio_pool
)
3583 calc_sectors(conf
, mddev
->dev_sectors
);
3584 if (mddev
->reshape_position
== MaxSector
) {
3585 conf
->prev
= conf
->geo
;
3586 conf
->reshape_progress
= MaxSector
;
3588 if (setup_geo(&conf
->prev
, mddev
, geo_old
) != conf
->copies
) {
3592 conf
->reshape_progress
= mddev
->reshape_position
;
3593 if (conf
->prev
.far_offset
)
3594 conf
->prev
.stride
= 1 << conf
->prev
.chunk_shift
;
3596 /* far_copies must be 1 */
3597 conf
->prev
.stride
= conf
->dev_sectors
;
3599 spin_lock_init(&conf
->device_lock
);
3600 INIT_LIST_HEAD(&conf
->retry_list
);
3602 spin_lock_init(&conf
->resync_lock
);
3603 init_waitqueue_head(&conf
->wait_barrier
);
3605 conf
->thread
= md_register_thread(raid10d
, mddev
, "raid10");
3609 conf
->mddev
= mddev
;
3614 printk(KERN_ERR
"md/raid10:%s: couldn't allocate memory.\n",
3617 if (conf
->r10bio_pool
)
3618 mempool_destroy(conf
->r10bio_pool
);
3619 kfree(conf
->mirrors
);
3620 safe_put_page(conf
->tmppage
);
3623 return ERR_PTR(err
);
3626 static int run(struct mddev
*mddev
)
3628 struct r10conf
*conf
;
3629 int i
, disk_idx
, chunk_size
;
3630 struct raid10_info
*disk
;
3631 struct md_rdev
*rdev
;
3633 sector_t min_offset_diff
= 0;
3635 bool discard_supported
= false;
3637 if (mddev
->private == NULL
) {
3638 conf
= setup_conf(mddev
);
3640 return PTR_ERR(conf
);
3641 mddev
->private = conf
;
3643 conf
= mddev
->private;
3647 mddev
->thread
= conf
->thread
;
3648 conf
->thread
= NULL
;
3650 chunk_size
= mddev
->chunk_sectors
<< 9;
3652 blk_queue_max_discard_sectors(mddev
->queue
,
3653 mddev
->chunk_sectors
);
3654 blk_queue_max_write_same_sectors(mddev
->queue
, 0);
3655 blk_queue_io_min(mddev
->queue
, chunk_size
);
3656 if (conf
->geo
.raid_disks
% conf
->geo
.near_copies
)
3657 blk_queue_io_opt(mddev
->queue
, chunk_size
* conf
->geo
.raid_disks
);
3659 blk_queue_io_opt(mddev
->queue
, chunk_size
*
3660 (conf
->geo
.raid_disks
/ conf
->geo
.near_copies
));
3663 rdev_for_each(rdev
, mddev
) {
3665 struct request_queue
*q
;
3667 disk_idx
= rdev
->raid_disk
;
3670 if (disk_idx
>= conf
->geo
.raid_disks
&&
3671 disk_idx
>= conf
->prev
.raid_disks
)
3673 disk
= conf
->mirrors
+ disk_idx
;
3675 if (test_bit(Replacement
, &rdev
->flags
)) {
3676 if (disk
->replacement
)
3678 disk
->replacement
= rdev
;
3684 q
= bdev_get_queue(rdev
->bdev
);
3685 if (q
->merge_bvec_fn
)
3686 mddev
->merge_check_needed
= 1;
3687 diff
= (rdev
->new_data_offset
- rdev
->data_offset
);
3688 if (!mddev
->reshape_backwards
)
3692 if (first
|| diff
< min_offset_diff
)
3693 min_offset_diff
= diff
;
3696 disk_stack_limits(mddev
->gendisk
, rdev
->bdev
,
3697 rdev
->data_offset
<< 9);
3699 disk
->head_position
= 0;
3701 if (blk_queue_discard(bdev_get_queue(rdev
->bdev
)))
3702 discard_supported
= true;
3706 if (discard_supported
)
3707 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD
,
3710 queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD
,
3713 /* need to check that every block has at least one working mirror */
3714 if (!enough(conf
, -1)) {
3715 printk(KERN_ERR
"md/raid10:%s: not enough operational mirrors.\n",
3720 if (conf
->reshape_progress
!= MaxSector
) {
3721 /* must ensure that shape change is supported */
3722 if (conf
->geo
.far_copies
!= 1 &&
3723 conf
->geo
.far_offset
== 0)
3725 if (conf
->prev
.far_copies
!= 1 &&
3726 conf
->geo
.far_offset
== 0)
3730 mddev
->degraded
= 0;
3732 i
< conf
->geo
.raid_disks
3733 || i
< conf
->prev
.raid_disks
;
3736 disk
= conf
->mirrors
+ i
;
3738 if (!disk
->rdev
&& disk
->replacement
) {
3739 /* The replacement is all we have - use it */
3740 disk
->rdev
= disk
->replacement
;
3741 disk
->replacement
= NULL
;
3742 clear_bit(Replacement
, &disk
->rdev
->flags
);
3746 !test_bit(In_sync
, &disk
->rdev
->flags
)) {
3747 disk
->head_position
= 0;
3752 disk
->recovery_disabled
= mddev
->recovery_disabled
- 1;
3755 if (mddev
->recovery_cp
!= MaxSector
)
3756 printk(KERN_NOTICE
"md/raid10:%s: not clean"
3757 " -- starting background reconstruction\n",
3760 "md/raid10:%s: active with %d out of %d devices\n",
3761 mdname(mddev
), conf
->geo
.raid_disks
- mddev
->degraded
,
3762 conf
->geo
.raid_disks
);
3764 * Ok, everything is just fine now
3766 mddev
->dev_sectors
= conf
->dev_sectors
;
3767 size
= raid10_size(mddev
, 0, 0);
3768 md_set_array_sectors(mddev
, size
);
3769 mddev
->resync_max_sectors
= size
;
3772 int stripe
= conf
->geo
.raid_disks
*
3773 ((mddev
->chunk_sectors
<< 9) / PAGE_SIZE
);
3774 mddev
->queue
->backing_dev_info
.congested_fn
= raid10_congested
;
3775 mddev
->queue
->backing_dev_info
.congested_data
= mddev
;
3777 /* Calculate max read-ahead size.
3778 * We need to readahead at least twice a whole stripe....
3781 stripe
/= conf
->geo
.near_copies
;
3782 if (mddev
->queue
->backing_dev_info
.ra_pages
< 2 * stripe
)
3783 mddev
->queue
->backing_dev_info
.ra_pages
= 2 * stripe
;
3784 blk_queue_merge_bvec(mddev
->queue
, raid10_mergeable_bvec
);
3788 if (md_integrity_register(mddev
))
3791 if (conf
->reshape_progress
!= MaxSector
) {
3792 unsigned long before_length
, after_length
;
3794 before_length
= ((1 << conf
->prev
.chunk_shift
) *
3795 conf
->prev
.far_copies
);
3796 after_length
= ((1 << conf
->geo
.chunk_shift
) *
3797 conf
->geo
.far_copies
);
3799 if (max(before_length
, after_length
) > min_offset_diff
) {
3800 /* This cannot work */
3801 printk("md/raid10: offset difference not enough to continue reshape\n");
3804 conf
->offset_diff
= min_offset_diff
;
3806 conf
->reshape_safe
= conf
->reshape_progress
;
3807 clear_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
);
3808 clear_bit(MD_RECOVERY_CHECK
, &mddev
->recovery
);
3809 set_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
);
3810 set_bit(MD_RECOVERY_RUNNING
, &mddev
->recovery
);
3811 mddev
->sync_thread
= md_register_thread(md_do_sync
, mddev
,
3818 md_unregister_thread(&mddev
->thread
);
3819 if (conf
->r10bio_pool
)
3820 mempool_destroy(conf
->r10bio_pool
);
3821 safe_put_page(conf
->tmppage
);
3822 kfree(conf
->mirrors
);
3824 mddev
->private = NULL
;
3829 static int stop(struct mddev
*mddev
)
3831 struct r10conf
*conf
= mddev
->private;
3833 raise_barrier(conf
, 0);
3834 lower_barrier(conf
);
3836 md_unregister_thread(&mddev
->thread
);
3838 /* the unplug fn references 'conf'*/
3839 blk_sync_queue(mddev
->queue
);
3841 if (conf
->r10bio_pool
)
3842 mempool_destroy(conf
->r10bio_pool
);
3843 safe_put_page(conf
->tmppage
);
3844 kfree(conf
->mirrors
);
3846 mddev
->private = NULL
;
3850 static void raid10_quiesce(struct mddev
*mddev
, int state
)
3852 struct r10conf
*conf
= mddev
->private;
3856 raise_barrier(conf
, 0);
3859 lower_barrier(conf
);
3864 static int raid10_resize(struct mddev
*mddev
, sector_t sectors
)
3866 /* Resize of 'far' arrays is not supported.
3867 * For 'near' and 'offset' arrays we can set the
3868 * number of sectors used to be an appropriate multiple
3869 * of the chunk size.
3870 * For 'offset', this is far_copies*chunksize.
3871 * For 'near' the multiplier is the LCM of
3872 * near_copies and raid_disks.
3873 * So if far_copies > 1 && !far_offset, fail.
3874 * Else find LCM(raid_disks, near_copy)*far_copies and
3875 * multiply by chunk_size. Then round to this number.
3876 * This is mostly done by raid10_size()
3878 struct r10conf
*conf
= mddev
->private;
3879 sector_t oldsize
, size
;
3881 if (mddev
->reshape_position
!= MaxSector
)
3884 if (conf
->geo
.far_copies
> 1 && !conf
->geo
.far_offset
)
3887 oldsize
= raid10_size(mddev
, 0, 0);
3888 size
= raid10_size(mddev
, sectors
, 0);
3889 if (mddev
->external_size
&&
3890 mddev
->array_sectors
> size
)
3892 if (mddev
->bitmap
) {
3893 int ret
= bitmap_resize(mddev
->bitmap
, size
, 0, 0);
3897 md_set_array_sectors(mddev
, size
);
3898 set_capacity(mddev
->gendisk
, mddev
->array_sectors
);
3899 revalidate_disk(mddev
->gendisk
);
3900 if (sectors
> mddev
->dev_sectors
&&
3901 mddev
->recovery_cp
> oldsize
) {
3902 mddev
->recovery_cp
= oldsize
;
3903 set_bit(MD_RECOVERY_NEEDED
, &mddev
->recovery
);
3905 calc_sectors(conf
, sectors
);
3906 mddev
->dev_sectors
= conf
->dev_sectors
;
3907 mddev
->resync_max_sectors
= size
;
3911 static void *raid10_takeover_raid0(struct mddev
*mddev
)
3913 struct md_rdev
*rdev
;
3914 struct r10conf
*conf
;
3916 if (mddev
->degraded
> 0) {
3917 printk(KERN_ERR
"md/raid10:%s: Error: degraded raid0!\n",
3919 return ERR_PTR(-EINVAL
);
3922 /* Set new parameters */
3923 mddev
->new_level
= 10;
3924 /* new layout: far_copies = 1, near_copies = 2 */
3925 mddev
->new_layout
= (1<<8) + 2;
3926 mddev
->new_chunk_sectors
= mddev
->chunk_sectors
;
3927 mddev
->delta_disks
= mddev
->raid_disks
;
3928 mddev
->raid_disks
*= 2;
3929 /* make sure it will be not marked as dirty */
3930 mddev
->recovery_cp
= MaxSector
;
3932 conf
= setup_conf(mddev
);
3933 if (!IS_ERR(conf
)) {
3934 rdev_for_each(rdev
, mddev
)
3935 if (rdev
->raid_disk
>= 0)
3936 rdev
->new_raid_disk
= rdev
->raid_disk
* 2;
3943 static void *raid10_takeover(struct mddev
*mddev
)
3945 struct r0conf
*raid0_conf
;
3947 /* raid10 can take over:
3948 * raid0 - providing it has only two drives
3950 if (mddev
->level
== 0) {
3951 /* for raid0 takeover only one zone is supported */
3952 raid0_conf
= mddev
->private;
3953 if (raid0_conf
->nr_strip_zones
> 1) {
3954 printk(KERN_ERR
"md/raid10:%s: cannot takeover raid 0"
3955 " with more than one zone.\n",
3957 return ERR_PTR(-EINVAL
);
3959 return raid10_takeover_raid0(mddev
);
3961 return ERR_PTR(-EINVAL
);
3964 static int raid10_check_reshape(struct mddev
*mddev
)
3966 /* Called when there is a request to change
3967 * - layout (to ->new_layout)
3968 * - chunk size (to ->new_chunk_sectors)
3969 * - raid_disks (by delta_disks)
3970 * or when trying to restart a reshape that was ongoing.
3972 * We need to validate the request and possibly allocate
3973 * space if that might be an issue later.
3975 * Currently we reject any reshape of a 'far' mode array,
3976 * allow chunk size to change if new is generally acceptable,
3977 * allow raid_disks to increase, and allow
3978 * a switch between 'near' mode and 'offset' mode.
3980 struct r10conf
*conf
= mddev
->private;
3983 if (conf
->geo
.far_copies
!= 1 && !conf
->geo
.far_offset
)
3986 if (setup_geo(&geo
, mddev
, geo_start
) != conf
->copies
)
3987 /* mustn't change number of copies */
3989 if (geo
.far_copies
> 1 && !geo
.far_offset
)
3990 /* Cannot switch to 'far' mode */
3993 if (mddev
->array_sectors
& geo
.chunk_mask
)
3994 /* not factor of array size */
3997 if (!enough(conf
, -1))
4000 kfree(conf
->mirrors_new
);
4001 conf
->mirrors_new
= NULL
;
4002 if (mddev
->delta_disks
> 0) {
4003 /* allocate new 'mirrors' list */
4004 conf
->mirrors_new
= kzalloc(
4005 sizeof(struct raid10_info
)
4006 *(mddev
->raid_disks
+
4007 mddev
->delta_disks
),
4009 if (!conf
->mirrors_new
)
4016 * Need to check if array has failed when deciding whether to:
4018 * - remove non-faulty devices
4021 * This determination is simple when no reshape is happening.
4022 * However if there is a reshape, we need to carefully check
4023 * both the before and after sections.
4024 * This is because some failed devices may only affect one
4025 * of the two sections, and some non-in_sync devices may
4026 * be insync in the section most affected by failed devices.
4028 static int calc_degraded(struct r10conf
*conf
)
4030 int degraded
, degraded2
;
4035 /* 'prev' section first */
4036 for (i
= 0; i
< conf
->prev
.raid_disks
; i
++) {
4037 struct md_rdev
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
4038 if (!rdev
|| test_bit(Faulty
, &rdev
->flags
))
4040 else if (!test_bit(In_sync
, &rdev
->flags
))
4041 /* When we can reduce the number of devices in
4042 * an array, this might not contribute to
4043 * 'degraded'. It does now.
4048 if (conf
->geo
.raid_disks
== conf
->prev
.raid_disks
)
4052 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++) {
4053 struct md_rdev
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
4054 if (!rdev
|| test_bit(Faulty
, &rdev
->flags
))
4056 else if (!test_bit(In_sync
, &rdev
->flags
)) {
4057 /* If reshape is increasing the number of devices,
4058 * this section has already been recovered, so
4059 * it doesn't contribute to degraded.
4062 if (conf
->geo
.raid_disks
<= conf
->prev
.raid_disks
)
4067 if (degraded2
> degraded
)
4072 static int raid10_start_reshape(struct mddev
*mddev
)
4074 /* A 'reshape' has been requested. This commits
4075 * the various 'new' fields and sets MD_RECOVER_RESHAPE
4076 * This also checks if there are enough spares and adds them
4078 * We currently require enough spares to make the final
4079 * array non-degraded. We also require that the difference
4080 * between old and new data_offset - on each device - is
4081 * enough that we never risk over-writing.
4084 unsigned long before_length
, after_length
;
4085 sector_t min_offset_diff
= 0;
4088 struct r10conf
*conf
= mddev
->private;
4089 struct md_rdev
*rdev
;
4093 if (test_bit(MD_RECOVERY_RUNNING
, &mddev
->recovery
))
4096 if (setup_geo(&new, mddev
, geo_start
) != conf
->copies
)
4099 before_length
= ((1 << conf
->prev
.chunk_shift
) *
4100 conf
->prev
.far_copies
);
4101 after_length
= ((1 << conf
->geo
.chunk_shift
) *
4102 conf
->geo
.far_copies
);
4104 rdev_for_each(rdev
, mddev
) {
4105 if (!test_bit(In_sync
, &rdev
->flags
)
4106 && !test_bit(Faulty
, &rdev
->flags
))
4108 if (rdev
->raid_disk
>= 0) {
4109 long long diff
= (rdev
->new_data_offset
4110 - rdev
->data_offset
);
4111 if (!mddev
->reshape_backwards
)
4115 if (first
|| diff
< min_offset_diff
)
4116 min_offset_diff
= diff
;
4120 if (max(before_length
, after_length
) > min_offset_diff
)
4123 if (spares
< mddev
->delta_disks
)
4126 conf
->offset_diff
= min_offset_diff
;
4127 spin_lock_irq(&conf
->device_lock
);
4128 if (conf
->mirrors_new
) {
4129 memcpy(conf
->mirrors_new
, conf
->mirrors
,
4130 sizeof(struct raid10_info
)*conf
->prev
.raid_disks
);
4132 kfree(conf
->mirrors_old
); /* FIXME and elsewhere */
4133 conf
->mirrors_old
= conf
->mirrors
;
4134 conf
->mirrors
= conf
->mirrors_new
;
4135 conf
->mirrors_new
= NULL
;
4137 setup_geo(&conf
->geo
, mddev
, geo_start
);
4139 if (mddev
->reshape_backwards
) {
4140 sector_t size
= raid10_size(mddev
, 0, 0);
4141 if (size
< mddev
->array_sectors
) {
4142 spin_unlock_irq(&conf
->device_lock
);
4143 printk(KERN_ERR
"md/raid10:%s: array size must be reduce before number of disks\n",
4147 mddev
->resync_max_sectors
= size
;
4148 conf
->reshape_progress
= size
;
4150 conf
->reshape_progress
= 0;
4151 spin_unlock_irq(&conf
->device_lock
);
4153 if (mddev
->delta_disks
&& mddev
->bitmap
) {
4154 ret
= bitmap_resize(mddev
->bitmap
,
4155 raid10_size(mddev
, 0,
4156 conf
->geo
.raid_disks
),
4161 if (mddev
->delta_disks
> 0) {
4162 rdev_for_each(rdev
, mddev
)
4163 if (rdev
->raid_disk
< 0 &&
4164 !test_bit(Faulty
, &rdev
->flags
)) {
4165 if (raid10_add_disk(mddev
, rdev
) == 0) {
4166 if (rdev
->raid_disk
>=
4167 conf
->prev
.raid_disks
)
4168 set_bit(In_sync
, &rdev
->flags
);
4170 rdev
->recovery_offset
= 0;
4172 if (sysfs_link_rdev(mddev
, rdev
))
4173 /* Failure here is OK */;
4175 } else if (rdev
->raid_disk
>= conf
->prev
.raid_disks
4176 && !test_bit(Faulty
, &rdev
->flags
)) {
4177 /* This is a spare that was manually added */
4178 set_bit(In_sync
, &rdev
->flags
);
4181 /* When a reshape changes the number of devices,
4182 * ->degraded is measured against the larger of the
4183 * pre and post numbers.
4185 spin_lock_irq(&conf
->device_lock
);
4186 mddev
->degraded
= calc_degraded(conf
);
4187 spin_unlock_irq(&conf
->device_lock
);
4188 mddev
->raid_disks
= conf
->geo
.raid_disks
;
4189 mddev
->reshape_position
= conf
->reshape_progress
;
4190 set_bit(MD_CHANGE_DEVS
, &mddev
->flags
);
4192 clear_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
);
4193 clear_bit(MD_RECOVERY_CHECK
, &mddev
->recovery
);
4194 set_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
);
4195 set_bit(MD_RECOVERY_RUNNING
, &mddev
->recovery
);
4197 mddev
->sync_thread
= md_register_thread(md_do_sync
, mddev
,
4199 if (!mddev
->sync_thread
) {
4203 conf
->reshape_checkpoint
= jiffies
;
4204 md_wakeup_thread(mddev
->sync_thread
);
4205 md_new_event(mddev
);
4209 mddev
->recovery
= 0;
4210 spin_lock_irq(&conf
->device_lock
);
4211 conf
->geo
= conf
->prev
;
4212 mddev
->raid_disks
= conf
->geo
.raid_disks
;
4213 rdev_for_each(rdev
, mddev
)
4214 rdev
->new_data_offset
= rdev
->data_offset
;
4216 conf
->reshape_progress
= MaxSector
;
4217 mddev
->reshape_position
= MaxSector
;
4218 spin_unlock_irq(&conf
->device_lock
);
4222 /* Calculate the last device-address that could contain
4223 * any block from the chunk that includes the array-address 's'
4224 * and report the next address.
4225 * i.e. the address returned will be chunk-aligned and after
4226 * any data that is in the chunk containing 's'.
4228 static sector_t
last_dev_address(sector_t s
, struct geom
*geo
)
4230 s
= (s
| geo
->chunk_mask
) + 1;
4231 s
>>= geo
->chunk_shift
;
4232 s
*= geo
->near_copies
;
4233 s
= DIV_ROUND_UP_SECTOR_T(s
, geo
->raid_disks
);
4234 s
*= geo
->far_copies
;
4235 s
<<= geo
->chunk_shift
;
4239 /* Calculate the first device-address that could contain
4240 * any block from the chunk that includes the array-address 's'.
4241 * This too will be the start of a chunk
4243 static sector_t
first_dev_address(sector_t s
, struct geom
*geo
)
4245 s
>>= geo
->chunk_shift
;
4246 s
*= geo
->near_copies
;
4247 sector_div(s
, geo
->raid_disks
);
4248 s
*= geo
->far_copies
;
4249 s
<<= geo
->chunk_shift
;
4253 static sector_t
reshape_request(struct mddev
*mddev
, sector_t sector_nr
,
4256 /* We simply copy at most one chunk (smallest of old and new)
4257 * at a time, possibly less if that exceeds RESYNC_PAGES,
4258 * or we hit a bad block or something.
4259 * This might mean we pause for normal IO in the middle of
4260 * a chunk, but that is not a problem was mddev->reshape_position
4261 * can record any location.
4263 * If we will want to write to a location that isn't
4264 * yet recorded as 'safe' (i.e. in metadata on disk) then
4265 * we need to flush all reshape requests and update the metadata.
4267 * When reshaping forwards (e.g. to more devices), we interpret
4268 * 'safe' as the earliest block which might not have been copied
4269 * down yet. We divide this by previous stripe size and multiply
4270 * by previous stripe length to get lowest device offset that we
4271 * cannot write to yet.
4272 * We interpret 'sector_nr' as an address that we want to write to.
4273 * From this we use last_device_address() to find where we might
4274 * write to, and first_device_address on the 'safe' position.
4275 * If this 'next' write position is after the 'safe' position,
4276 * we must update the metadata to increase the 'safe' position.
4278 * When reshaping backwards, we round in the opposite direction
4279 * and perform the reverse test: next write position must not be
4280 * less than current safe position.
4282 * In all this the minimum difference in data offsets
4283 * (conf->offset_diff - always positive) allows a bit of slack,
4284 * so next can be after 'safe', but not by more than offset_disk
4286 * We need to prepare all the bios here before we start any IO
4287 * to ensure the size we choose is acceptable to all devices.
4288 * The means one for each copy for write-out and an extra one for
4290 * We store the read-in bio in ->master_bio and the others in
4291 * ->devs[x].bio and ->devs[x].repl_bio.
4293 struct r10conf
*conf
= mddev
->private;
4294 struct r10bio
*r10_bio
;
4295 sector_t next
, safe
, last
;
4299 struct md_rdev
*rdev
;
4302 struct bio
*bio
, *read_bio
;
4303 int sectors_done
= 0;
4305 if (sector_nr
== 0) {
4306 /* If restarting in the middle, skip the initial sectors */
4307 if (mddev
->reshape_backwards
&&
4308 conf
->reshape_progress
< raid10_size(mddev
, 0, 0)) {
4309 sector_nr
= (raid10_size(mddev
, 0, 0)
4310 - conf
->reshape_progress
);
4311 } else if (!mddev
->reshape_backwards
&&
4312 conf
->reshape_progress
> 0)
4313 sector_nr
= conf
->reshape_progress
;
4315 mddev
->curr_resync_completed
= sector_nr
;
4316 sysfs_notify(&mddev
->kobj
, NULL
, "sync_completed");
4322 /* We don't use sector_nr to track where we are up to
4323 * as that doesn't work well for ->reshape_backwards.
4324 * So just use ->reshape_progress.
4326 if (mddev
->reshape_backwards
) {
4327 /* 'next' is the earliest device address that we might
4328 * write to for this chunk in the new layout
4330 next
= first_dev_address(conf
->reshape_progress
- 1,
4333 /* 'safe' is the last device address that we might read from
4334 * in the old layout after a restart
4336 safe
= last_dev_address(conf
->reshape_safe
- 1,
4339 if (next
+ conf
->offset_diff
< safe
)
4342 last
= conf
->reshape_progress
- 1;
4343 sector_nr
= last
& ~(sector_t
)(conf
->geo
.chunk_mask
4344 & conf
->prev
.chunk_mask
);
4345 if (sector_nr
+ RESYNC_BLOCK_SIZE
/512 < last
)
4346 sector_nr
= last
+ 1 - RESYNC_BLOCK_SIZE
/512;
4348 /* 'next' is after the last device address that we
4349 * might write to for this chunk in the new layout
4351 next
= last_dev_address(conf
->reshape_progress
, &conf
->geo
);
4353 /* 'safe' is the earliest device address that we might
4354 * read from in the old layout after a restart
4356 safe
= first_dev_address(conf
->reshape_safe
, &conf
->prev
);
4358 /* Need to update metadata if 'next' might be beyond 'safe'
4359 * as that would possibly corrupt data
4361 if (next
> safe
+ conf
->offset_diff
)
4364 sector_nr
= conf
->reshape_progress
;
4365 last
= sector_nr
| (conf
->geo
.chunk_mask
4366 & conf
->prev
.chunk_mask
);
4368 if (sector_nr
+ RESYNC_BLOCK_SIZE
/512 <= last
)
4369 last
= sector_nr
+ RESYNC_BLOCK_SIZE
/512 - 1;
4373 time_after(jiffies
, conf
->reshape_checkpoint
+ 10*HZ
)) {
4374 /* Need to update reshape_position in metadata */
4376 mddev
->reshape_position
= conf
->reshape_progress
;
4377 if (mddev
->reshape_backwards
)
4378 mddev
->curr_resync_completed
= raid10_size(mddev
, 0, 0)
4379 - conf
->reshape_progress
;
4381 mddev
->curr_resync_completed
= conf
->reshape_progress
;
4382 conf
->reshape_checkpoint
= jiffies
;
4383 set_bit(MD_CHANGE_DEVS
, &mddev
->flags
);
4384 md_wakeup_thread(mddev
->thread
);
4385 wait_event(mddev
->sb_wait
, mddev
->flags
== 0 ||
4386 kthread_should_stop());
4387 conf
->reshape_safe
= mddev
->reshape_position
;
4388 allow_barrier(conf
);
4392 /* Now schedule reads for blocks from sector_nr to last */
4393 r10_bio
= mempool_alloc(conf
->r10buf_pool
, GFP_NOIO
);
4394 raise_barrier(conf
, sectors_done
!= 0);
4395 atomic_set(&r10_bio
->remaining
, 0);
4396 r10_bio
->mddev
= mddev
;
4397 r10_bio
->sector
= sector_nr
;
4398 set_bit(R10BIO_IsReshape
, &r10_bio
->state
);
4399 r10_bio
->sectors
= last
- sector_nr
+ 1;
4400 rdev
= read_balance(conf
, r10_bio
, &max_sectors
);
4401 BUG_ON(!test_bit(R10BIO_Previous
, &r10_bio
->state
));
4404 /* Cannot read from here, so need to record bad blocks
4405 * on all the target devices.
4408 set_bit(MD_RECOVERY_INTR
, &mddev
->recovery
);
4409 return sectors_done
;
4412 read_bio
= bio_alloc_mddev(GFP_KERNEL
, RESYNC_PAGES
, mddev
);
4414 read_bio
->bi_bdev
= rdev
->bdev
;
4415 read_bio
->bi_sector
= (r10_bio
->devs
[r10_bio
->read_slot
].addr
4416 + rdev
->data_offset
);
4417 read_bio
->bi_private
= r10_bio
;
4418 read_bio
->bi_end_io
= end_sync_read
;
4419 read_bio
->bi_rw
= READ
;
4420 read_bio
->bi_flags
&= ~(BIO_POOL_MASK
- 1);
4421 read_bio
->bi_flags
|= 1 << BIO_UPTODATE
;
4422 read_bio
->bi_vcnt
= 0;
4423 read_bio
->bi_idx
= 0;
4424 read_bio
->bi_size
= 0;
4425 r10_bio
->master_bio
= read_bio
;
4426 r10_bio
->read_slot
= r10_bio
->devs
[r10_bio
->read_slot
].devnum
;
4428 /* Now find the locations in the new layout */
4429 __raid10_find_phys(&conf
->geo
, r10_bio
);
4432 read_bio
->bi_next
= NULL
;
4434 for (s
= 0; s
< conf
->copies
*2; s
++) {
4436 int d
= r10_bio
->devs
[s
/2].devnum
;
4437 struct md_rdev
*rdev2
;
4439 rdev2
= conf
->mirrors
[d
].replacement
;
4440 b
= r10_bio
->devs
[s
/2].repl_bio
;
4442 rdev2
= conf
->mirrors
[d
].rdev
;
4443 b
= r10_bio
->devs
[s
/2].bio
;
4445 if (!rdev2
|| test_bit(Faulty
, &rdev2
->flags
))
4447 b
->bi_bdev
= rdev2
->bdev
;
4448 b
->bi_sector
= r10_bio
->devs
[s
/2].addr
+ rdev2
->new_data_offset
;
4449 b
->bi_private
= r10_bio
;
4450 b
->bi_end_io
= end_reshape_write
;
4452 b
->bi_flags
&= ~(BIO_POOL_MASK
- 1);
4453 b
->bi_flags
|= 1 << BIO_UPTODATE
;
4461 /* Now add as many pages as possible to all of these bios. */
4464 for (s
= 0 ; s
< max_sectors
; s
+= PAGE_SIZE
>> 9) {
4465 struct page
*page
= r10_bio
->devs
[0].bio
->bi_io_vec
[s
/(PAGE_SIZE
>>9)].bv_page
;
4466 int len
= (max_sectors
- s
) << 9;
4467 if (len
> PAGE_SIZE
)
4469 for (bio
= blist
; bio
; bio
= bio
->bi_next
) {
4471 if (bio_add_page(bio
, page
, len
, 0))
4474 /* Didn't fit, must stop */
4476 bio2
&& bio2
!= bio
;
4477 bio2
= bio2
->bi_next
) {
4478 /* Remove last page from this bio */
4480 bio2
->bi_size
-= len
;
4481 bio2
->bi_flags
&= ~(1<<BIO_SEG_VALID
);
4485 sector_nr
+= len
>> 9;
4486 nr_sectors
+= len
>> 9;
4489 r10_bio
->sectors
= nr_sectors
;
4491 /* Now submit the read */
4492 md_sync_acct(read_bio
->bi_bdev
, r10_bio
->sectors
);
4493 atomic_inc(&r10_bio
->remaining
);
4494 read_bio
->bi_next
= NULL
;
4495 generic_make_request(read_bio
);
4496 sector_nr
+= nr_sectors
;
4497 sectors_done
+= nr_sectors
;
4498 if (sector_nr
<= last
)
4501 /* Now that we have done the whole section we can
4502 * update reshape_progress
4504 if (mddev
->reshape_backwards
)
4505 conf
->reshape_progress
-= sectors_done
;
4507 conf
->reshape_progress
+= sectors_done
;
4509 return sectors_done
;
4512 static void end_reshape_request(struct r10bio
*r10_bio
);
4513 static int handle_reshape_read_error(struct mddev
*mddev
,
4514 struct r10bio
*r10_bio
);
4515 static void reshape_request_write(struct mddev
*mddev
, struct r10bio
*r10_bio
)
4517 /* Reshape read completed. Hopefully we have a block
4519 * If we got a read error then we do sync 1-page reads from
4520 * elsewhere until we find the data - or give up.
4522 struct r10conf
*conf
= mddev
->private;
4525 if (!test_bit(R10BIO_Uptodate
, &r10_bio
->state
))
4526 if (handle_reshape_read_error(mddev
, r10_bio
) < 0) {
4527 /* Reshape has been aborted */
4528 md_done_sync(mddev
, r10_bio
->sectors
, 0);
4532 /* We definitely have the data in the pages, schedule the
4535 atomic_set(&r10_bio
->remaining
, 1);
4536 for (s
= 0; s
< conf
->copies
*2; s
++) {
4538 int d
= r10_bio
->devs
[s
/2].devnum
;
4539 struct md_rdev
*rdev
;
4541 rdev
= conf
->mirrors
[d
].replacement
;
4542 b
= r10_bio
->devs
[s
/2].repl_bio
;
4544 rdev
= conf
->mirrors
[d
].rdev
;
4545 b
= r10_bio
->devs
[s
/2].bio
;
4547 if (!rdev
|| test_bit(Faulty
, &rdev
->flags
))
4549 atomic_inc(&rdev
->nr_pending
);
4550 md_sync_acct(b
->bi_bdev
, r10_bio
->sectors
);
4551 atomic_inc(&r10_bio
->remaining
);
4553 generic_make_request(b
);
4555 end_reshape_request(r10_bio
);
4558 static void end_reshape(struct r10conf
*conf
)
4560 if (test_bit(MD_RECOVERY_INTR
, &conf
->mddev
->recovery
))
4563 spin_lock_irq(&conf
->device_lock
);
4564 conf
->prev
= conf
->geo
;
4565 md_finish_reshape(conf
->mddev
);
4567 conf
->reshape_progress
= MaxSector
;
4568 spin_unlock_irq(&conf
->device_lock
);
4570 /* read-ahead size must cover two whole stripes, which is
4571 * 2 * (datadisks) * chunksize where 'n' is the number of raid devices
4573 if (conf
->mddev
->queue
) {
4574 int stripe
= conf
->geo
.raid_disks
*
4575 ((conf
->mddev
->chunk_sectors
<< 9) / PAGE_SIZE
);
4576 stripe
/= conf
->geo
.near_copies
;
4577 if (conf
->mddev
->queue
->backing_dev_info
.ra_pages
< 2 * stripe
)
4578 conf
->mddev
->queue
->backing_dev_info
.ra_pages
= 2 * stripe
;
4584 static int handle_reshape_read_error(struct mddev
*mddev
,
4585 struct r10bio
*r10_bio
)
4587 /* Use sync reads to get the blocks from somewhere else */
4588 int sectors
= r10_bio
->sectors
;
4589 struct r10conf
*conf
= mddev
->private;
4591 struct r10bio r10_bio
;
4592 struct r10dev devs
[conf
->copies
];
4594 struct r10bio
*r10b
= &on_stack
.r10_bio
;
4597 struct bio_vec
*bvec
= r10_bio
->master_bio
->bi_io_vec
;
4599 r10b
->sector
= r10_bio
->sector
;
4600 __raid10_find_phys(&conf
->prev
, r10b
);
4605 int first_slot
= slot
;
4607 if (s
> (PAGE_SIZE
>> 9))
4611 int d
= r10b
->devs
[slot
].devnum
;
4612 struct md_rdev
*rdev
= conf
->mirrors
[d
].rdev
;
4615 test_bit(Faulty
, &rdev
->flags
) ||
4616 !test_bit(In_sync
, &rdev
->flags
))
4619 addr
= r10b
->devs
[slot
].addr
+ idx
* PAGE_SIZE
;
4620 success
= sync_page_io(rdev
,
4629 if (slot
>= conf
->copies
)
4631 if (slot
== first_slot
)
4635 /* couldn't read this block, must give up */
4636 set_bit(MD_RECOVERY_INTR
,
4646 static void end_reshape_write(struct bio
*bio
, int error
)
4648 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
4649 struct r10bio
*r10_bio
= bio
->bi_private
;
4650 struct mddev
*mddev
= r10_bio
->mddev
;
4651 struct r10conf
*conf
= mddev
->private;
4655 struct md_rdev
*rdev
= NULL
;
4657 d
= find_bio_disk(conf
, r10_bio
, bio
, &slot
, &repl
);
4659 rdev
= conf
->mirrors
[d
].replacement
;
4662 rdev
= conf
->mirrors
[d
].rdev
;
4666 /* FIXME should record badblock */
4667 md_error(mddev
, rdev
);
4670 rdev_dec_pending(rdev
, mddev
);
4671 end_reshape_request(r10_bio
);
4674 static void end_reshape_request(struct r10bio
*r10_bio
)
4676 if (!atomic_dec_and_test(&r10_bio
->remaining
))
4678 md_done_sync(r10_bio
->mddev
, r10_bio
->sectors
, 1);
4679 bio_put(r10_bio
->master_bio
);
4683 static void raid10_finish_reshape(struct mddev
*mddev
)
4685 struct r10conf
*conf
= mddev
->private;
4687 if (test_bit(MD_RECOVERY_INTR
, &mddev
->recovery
))
4690 if (mddev
->delta_disks
> 0) {
4691 sector_t size
= raid10_size(mddev
, 0, 0);
4692 md_set_array_sectors(mddev
, size
);
4693 if (mddev
->recovery_cp
> mddev
->resync_max_sectors
) {
4694 mddev
->recovery_cp
= mddev
->resync_max_sectors
;
4695 set_bit(MD_RECOVERY_NEEDED
, &mddev
->recovery
);
4697 mddev
->resync_max_sectors
= size
;
4698 set_capacity(mddev
->gendisk
, mddev
->array_sectors
);
4699 revalidate_disk(mddev
->gendisk
);
4702 for (d
= conf
->geo
.raid_disks
;
4703 d
< conf
->geo
.raid_disks
- mddev
->delta_disks
;
4705 struct md_rdev
*rdev
= conf
->mirrors
[d
].rdev
;
4707 clear_bit(In_sync
, &rdev
->flags
);
4708 rdev
= conf
->mirrors
[d
].replacement
;
4710 clear_bit(In_sync
, &rdev
->flags
);
4713 mddev
->layout
= mddev
->new_layout
;
4714 mddev
->chunk_sectors
= 1 << conf
->geo
.chunk_shift
;
4715 mddev
->reshape_position
= MaxSector
;
4716 mddev
->delta_disks
= 0;
4717 mddev
->reshape_backwards
= 0;
4720 static struct md_personality raid10_personality
=
4724 .owner
= THIS_MODULE
,
4725 .make_request
= make_request
,
4729 .error_handler
= error
,
4730 .hot_add_disk
= raid10_add_disk
,
4731 .hot_remove_disk
= raid10_remove_disk
,
4732 .spare_active
= raid10_spare_active
,
4733 .sync_request
= sync_request
,
4734 .quiesce
= raid10_quiesce
,
4735 .size
= raid10_size
,
4736 .resize
= raid10_resize
,
4737 .takeover
= raid10_takeover
,
4738 .check_reshape
= raid10_check_reshape
,
4739 .start_reshape
= raid10_start_reshape
,
4740 .finish_reshape
= raid10_finish_reshape
,
4743 static int __init
raid_init(void)
4745 return register_md_personality(&raid10_personality
);
4748 static void raid_exit(void)
4750 unregister_md_personality(&raid10_personality
);
4753 module_init(raid_init
);
4754 module_exit(raid_exit
);
4755 MODULE_LICENSE("GPL");
4756 MODULE_DESCRIPTION("RAID10 (striped mirror) personality for MD");
4757 MODULE_ALIAS("md-personality-9"); /* RAID10 */
4758 MODULE_ALIAS("md-raid10");
4759 MODULE_ALIAS("md-level-10");
4761 module_param(max_queued_requests
, int, S_IRUGO
|S_IWUSR
);