drivers/media/Kconfig

   1 #
   2 # Multimedia device configuration
   3 #
   4
   5 config CEC_CORE
   6         tristate
   7
   8 config CEC_NOTIFIER
   9         bool
  10
  11 config CEC_PIN
  12         bool
  13
  14 source "drivers/media/rc/Kconfig"
  15
  16 menuconfig MEDIA_SUPPORT
  17         tristate "Multimedia support"
  18         depends on HAS_IOMEM
  19         help
  20           If you want to use Webcams, Video grabber devices and/or TV devices
  21           enable this option and other options below.
  22           Additional info and docs are available on the web at
  23           <https://linuxtv.org>
  24
  25 if MEDIA_SUPPORT
  26
  27 comment "Multimedia core support"
  28
  29 #
  30 # Multimedia support - automatically enable V4L2 and DVB core
  31 #
  32 config MEDIA_CAMERA_SUPPORT
  33         bool "Cameras/video grabbers support"
  34         ---help---
  35           Enable support for webcams and video grabbers.
  36
  37           Say Y when you have a webcam or a video capture grabber board.
  38
  39 config MEDIA_ANALOG_TV_SUPPORT
  40         bool "Analog TV support"
  41         ---help---
  42           Enable analog TV support.
  43
  44           Say Y when you have a TV board with analog support or with a
  45           hybrid analog/digital TV chipset.
  46
  47           Note: There are several DVB cards that are based on chips that
  48                 support both analog and digital TV. Disabling this option
  49                 will disable support for them.
  50
  51 config MEDIA_DIGITAL_TV_SUPPORT
  52         bool "Digital TV support"
  53         ---help---
  54           Enable digital TV support.
  55
  56           Say Y when you have a board with digital support or a board with
  57           hybrid digital TV and analog TV.
  58
  59 config MEDIA_RADIO_SUPPORT
  60         bool "AM/FM radio receivers/transmitters support"
  61         ---help---
  62           Enable AM/FM radio support.
  63
  64           Additional info and docs are available on the web at
  65           <https://linuxtv.org>
  66
  67           Say Y when you have a board with radio support.
  68
  69           Note: There are several TV cards that are based on chips that
  70                 support radio reception. Disabling this option will
  71                 disable support for them.
  72
  73 config MEDIA_SDR_SUPPORT
  74         bool "Software defined radio support"
  75         ---help---
  76           Enable software defined radio support.
  77
  78           Say Y when you have a software defined radio device.
  79
  80 config MEDIA_CEC_SUPPORT
  81        bool "HDMI CEC support"
  82        ---help---
  83          Enable support for HDMI CEC (Consumer Electronics Control),
  84          which is an optional HDMI feature.
  85
  86          Say Y when you have an HDMI receiver, transmitter or a USB CEC
  87          adapter that supports HDMI CEC.
  88
  89 source "drivers/media/cec/Kconfig"
  90
  91 #
  92 # Media controller
  93 #       Selectable only for webcam/grabbers, as other drivers don't use it
  94 #
  95
  96 config MEDIA_CONTROLLER
  97         bool "Media Controller API"
  98         depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
  99         ---help---
 100           Enable the media controller API used to query media devices internal
 101           topology and configure it dynamically.
 102
 103           This API is mostly used by camera interfaces in embedded platforms.
 104
 105 config MEDIA_CONTROLLER_DVB
 106         bool "Enable Media controller for DVB (EXPERIMENTAL)"
 107         depends on MEDIA_CONTROLLER && DVB_CORE
 108         ---help---
 109           Enable the media controller API support for DVB.
 110
 111           This is currently experimental.
 112
 113 #
 114 # Video4Linux support
 115 #       Only enables if one of the V4L2 types (ATV, webcam, radio) is selected
 116 #
 117
 118 config VIDEO_DEV
 119         tristate
 120         depends on MEDIA_SUPPORT
 121         depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
 122         default y
 123
 124 config VIDEO_V4L2_SUBDEV_API
 125         bool "V4L2 sub-device userspace API"
 126         depends on VIDEO_DEV && MEDIA_CONTROLLER
 127         ---help---
 128           Enables the V4L2 sub-device pad-level userspace API used to configure
 129           video format, size and frame rate between hardware blocks.
 130
 131           This API is mostly used by camera interfaces in embedded platforms.
 132
 133 source "drivers/media/v4l2-core/Kconfig"
 134
 135 #
 136 # DVB Core
 137 #       Only enables if one of DTV is selected
 138 #
 139
 140 config DVB_CORE
 141         tristate
 142         depends on MEDIA_SUPPORT
 143         depends on MEDIA_DIGITAL_TV_SUPPORT
 144         default y
 145         select CRC32
 146
 147 config DVB_NET
 148         bool "DVB Network Support"
 149         default (NET && INET)
 150         depends on NET && INET && DVB_CORE
 151         help
 152           This option enables DVB Network Support which is a part of the DVB
 153           standard. It is used, for example, by automatic firmware updates used
 154           on Set-Top-Boxes. It can also be used to access the Internet via the
 155           DVB card, if the network provider supports it.
 156
 157           You may want to disable the network support on embedded devices. If
 158           unsure say Y.
 159
 160 # This Kconfig option is used by both PCI and USB drivers
 161 config TTPCI_EEPROM
 162         tristate
 163         depends on I2C
 164         default n
 165
 166 source "drivers/media/dvb-core/Kconfig"
 167
 168 comment "Media drivers"
 169
 170 #
 171 # V4L platform/mem2mem drivers
 172 #
 173
 174 source "drivers/media/usb/Kconfig"
 175 source "drivers/media/pci/Kconfig"
 176 source "drivers/media/platform/Kconfig"
 177 source "drivers/media/mmc/Kconfig"
 178 source "drivers/media/radio/Kconfig"
 179
 180 comment "Supported FireWire (IEEE 1394) Adapters"
 181         depends on DVB_CORE && FIREWIRE
 182 source "drivers/media/firewire/Kconfig"
 183
 184 # Common driver options
 185 source "drivers/media/common/Kconfig"
 186
 187 comment "Media ancillary drivers (tuners, sensors, i2c, spi, frontends)"
 188
 189 #
 190 # Ancillary drivers (tuners, i2c, spi, frontends)
 191 #
 192
 193 config MEDIA_SUBDRV_AUTOSELECT
 194         bool "Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)"
 195         depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT || MEDIA_SDR_SUPPORT
 196         depends on HAS_IOMEM
 197         select I2C
 198         select I2C_MUX
 199         default y
 200         help
 201           By default, a media driver auto-selects all possible ancillary
 202           devices such as tuners, sensors, video encoders/decoders and
 203           frontends, that are used by any of the supported devices.
 204
 205           This is generally the right thing to do, except when there
 206           are strict constraints with regards to the kernel size,
 207           like on embedded systems.
 208
 209           Use this option with care, as deselecting ancillary drivers which
 210           are, in fact, necessary will result in the lack of the needed
 211           functionality for your device (it may not tune or may not have
 212           the needed demodulators).
 213
 214           If unsure say Y.
 215
 216 config MEDIA_ATTACH
 217         bool
 218         depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
 219         depends on MODULES
 220         default MODULES
 221
 222 source "drivers/media/i2c/Kconfig"
 223 source "drivers/media/spi/Kconfig"
 224 source "drivers/media/tuners/Kconfig"
 225 source "drivers/media/dvb-frontends/Kconfig"
 226
 227 endif # MEDIA_SUPPORT