drivers/media/dvb-frontends/mt312.c

   1 /*
   2     Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder
   3
   4     Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
   5     Copyright (C) 2008 Matthias Schwarzott <zzam@gentoo.org>
   6
   7     This program is free software; you can redistribute it and/or modify
   8     it under the terms of the GNU General Public License as published by
   9     the Free Software Foundation; either version 2 of the License, or
  10     (at your option) any later version.
  11
  12     This program is distributed in the hope that it will be useful,
  13     but WITHOUT ANY WARRANTY; without even the implied warranty of
  14     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15
  16     GNU General Public License for more details.
  17
  18     You should have received a copy of the GNU General Public License
  19     along with this program; if not, write to the Free Software
  20     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21
  22     References:
  23     http://products.zarlink.com/product_profiles/MT312.htm
  24     http://products.zarlink.com/product_profiles/SL1935.htm
  25 */
  26
  27 #include <linux/delay.h>
  28 #include <linux/errno.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/string.h>
  33 #include <linux/slab.h>
  34
  35 #include <media/dvb_frontend.h>
  36 #include "mt312_priv.h"
  37 #include "mt312.h"
  38
  39 /* Max transfer size done by I2C transfer functions */
  40 #define MAX_XFER_SIZE  64
  41
  42 struct mt312_state {
  43         struct i2c_adapter *i2c;
  44         /* configuration settings */
  45         const struct mt312_config *config;
  46         struct dvb_frontend frontend;
  47
  48         u8 id;
  49         unsigned long xtal;
  50         u8 freq_mult;
  51 };
  52
  53 static int debug;
  54 #define dprintk(args...) \
  55         do { \
  56                 if (debug) \
  57                         printk(KERN_DEBUG "mt312: " args); \
  58         } while (0)
  59
  60 #define MT312_PLL_CLK           10000000UL      /* 10 MHz */
  61 #define MT312_PLL_CLK_10_111    10111000UL      /* 10.111 MHz */
  62
  63 static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
  64                       u8 *buf, const size_t count)
  65 {
  66         int ret;
  67         struct i2c_msg msg[2];
  68         u8 regbuf[1] = { reg };
  69
  70         msg[0].addr = state->config->demod_address;
  71         msg[0].flags = 0;
  72         msg[0].buf = regbuf;
  73         msg[0].len = 1;
  74         msg[1].addr = state->config->demod_address;
  75         msg[1].flags = I2C_M_RD;
  76         msg[1].buf = buf;
  77         msg[1].len = count;
  78
  79         ret = i2c_transfer(state->i2c, msg, 2);
  80
  81         if (ret != 2) {
  82                 printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret);
  83                 return -EREMOTEIO;
  84         }
  85
  86         if (debug) {
  87                 int i;
  88                 dprintk("R(%d):", reg & 0x7f);
  89                 for (i = 0; i < count; i++)
  90                         printk(KERN_CONT " %02x", buf[i]);
  91                 printk("\n");
  92         }
  93
  94         return 0;
  95 }
  96
  97 static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg,
  98                        const u8 *src, const size_t count)
  99 {
 100         int ret;
 101         u8 buf[MAX_XFER_SIZE];
 102         struct i2c_msg msg;
 103
 104         if (1 + count > sizeof(buf)) {
 105                 printk(KERN_WARNING
 106                        "mt312: write: len=%zu is too big!\n", count);
 107                 return -EINVAL;
 108         }
 109
 110         if (debug) {
 111                 int i;
 112                 dprintk("W(%d):", reg & 0x7f);
 113                 for (i = 0; i < count; i++)
 114                         printk(KERN_CONT " %02x", src[i]);
 115                 printk("\n");
 116         }
 117
 118         buf[0] = reg;
 119         memcpy(&buf[1], src, count);
 120
 121         msg.addr = state->config->demod_address;
 122         msg.flags = 0;
 123         msg.buf = buf;
 124         msg.len = count + 1;
 125
 126         ret = i2c_transfer(state->i2c, &msg, 1);
 127
 128         if (ret != 1) {
 129                 dprintk("%s: ret == %d\n", __func__, ret);
 130                 return -EREMOTEIO;
 131         }
 132
 133         return 0;
 134 }
 135
 136 static inline int mt312_readreg(struct mt312_state *state,
 137                                 const enum mt312_reg_addr reg, u8 *val)
 138 {
 139         return mt312_read(state, reg, val, 1);
 140 }
 141
 142 static inline int mt312_writereg(struct mt312_state *state,
 143                                  const enum mt312_reg_addr reg, const u8 val)
 144 {
 145         u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
 146
 147
 148         return mt312_write(state, reg, &tmp, 1);
 149 }
 150
 151 static inline u32 mt312_div(u32 a, u32 b)
 152 {
 153         return (a + (b / 2)) / b;
 154 }
 155
 156 static int mt312_reset(struct mt312_state *state, const u8 full)
 157 {
 158         return mt312_writereg(state, RESET, full ? 0x80 : 0x40);
 159 }
 160
 161 static int mt312_get_inversion(struct mt312_state *state,
 162                                enum fe_spectral_inversion *i)
 163 {
 164         int ret;
 165         u8 vit_mode;
 166
 167         ret = mt312_readreg(state, VIT_MODE, &vit_mode);
 168         if (ret < 0)
 169                 return ret;
 170
 171         if (vit_mode & 0x80)    /* auto inversion was used */
 172                 *i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF;
 173
 174         return 0;
 175 }
 176
 177 static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr)
 178 {
 179         int ret;
 180         u8 sym_rate_h;
 181         u8 dec_ratio;
 182         u16 sym_rat_op;
 183         u16 monitor;
 184         u8 buf[2];
 185
 186         ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h);
 187         if (ret < 0)
 188                 return ret;
 189
 190         if (sym_rate_h & 0x80) {
 191                 /* symbol rate search was used */
 192                 ret = mt312_writereg(state, MON_CTRL, 0x03);
 193                 if (ret < 0)
 194                         return ret;
 195
 196                 ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
 197                 if (ret < 0)
 198                         return ret;
 199
 200                 monitor = (buf[0] << 8) | buf[1];
 201
 202                 dprintk("sr(auto) = %u\n",
 203                        mt312_div(monitor * 15625, 4));
 204         } else {
 205                 ret = mt312_writereg(state, MON_CTRL, 0x05);
 206                 if (ret < 0)
 207                         return ret;
 208
 209                 ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
 210                 if (ret < 0)
 211                         return ret;
 212
 213                 dec_ratio = ((buf[0] >> 5) & 0x07) * 32;
 214
 215                 ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf));
 216                 if (ret < 0)
 217                         return ret;
 218
 219                 sym_rat_op = (buf[0] << 8) | buf[1];
 220
 221                 dprintk("sym_rat_op=%d dec_ratio=%d\n",
 222                        sym_rat_op, dec_ratio);
 223                 dprintk("*sr(manual) = %lu\n",
 224                        (((state->xtal * 8192) / (sym_rat_op + 8192)) *
 225                         2) - dec_ratio);
 226         }
 227
 228         return 0;
 229 }
 230
 231 static int mt312_get_code_rate(struct mt312_state *state, enum fe_code_rate *cr)
 232 {
 233         const enum fe_code_rate fec_tab[8] =
 234             { FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8,
 235                 FEC_AUTO, FEC_AUTO };
 236
 237         int ret;
 238         u8 fec_status;
 239
 240         ret = mt312_readreg(state, FEC_STATUS, &fec_status);
 241         if (ret < 0)
 242                 return ret;
 243
 244         *cr = fec_tab[(fec_status >> 4) & 0x07];
 245
 246         return 0;
 247 }
 248
 249 static int mt312_initfe(struct dvb_frontend *fe)
 250 {
 251         struct mt312_state *state = fe->demodulator_priv;
 252         int ret;
 253         u8 buf[2];
 254
 255         /* wake up */
 256         ret = mt312_writereg(state, CONFIG,
 257                         (state->freq_mult == 6 ? 0x88 : 0x8c));
 258         if (ret < 0)
 259                 return ret;
 260
 261         /* wait at least 150 usec */
 262         udelay(150);
 263
 264         /* full reset */
 265         ret = mt312_reset(state, 1);
 266         if (ret < 0)
 267                 return ret;
 268
 269 /* Per datasheet, write correct values. 09/28/03 ACCJr.
 270  * If we don't do this, we won't get FE_HAS_VITERBI in the VP310. */
 271         {
 272                 u8 buf_def[8] = { 0x14, 0x12, 0x03, 0x02,
 273                                   0x01, 0x00, 0x00, 0x00 };
 274
 275                 ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def));
 276                 if (ret < 0)
 277                         return ret;
 278         }
 279
 280         switch (state->id) {
 281         case ID_ZL10313:
 282                 /* enable ADC */
 283                 ret = mt312_writereg(state, GPP_CTRL, 0x80);
 284                 if (ret < 0)
 285                         return ret;
 286
 287                 /* configure ZL10313 for optimal ADC performance */
 288                 buf[0] = 0x80;
 289                 buf[1] = 0xB0;
 290                 ret = mt312_write(state, HW_CTRL, buf, 2);
 291                 if (ret < 0)
 292                         return ret;
 293
 294                 /* enable MPEG output and ADCs */
 295                 ret = mt312_writereg(state, HW_CTRL, 0x00);
 296                 if (ret < 0)
 297                         return ret;
 298
 299                 ret = mt312_writereg(state, MPEG_CTRL, 0x00);
 300                 if (ret < 0)
 301                         return ret;
 302
 303                 break;
 304         }
 305
 306         /* SYS_CLK */
 307         buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000);
 308
 309         /* DISEQC_RATIO */
 310         buf[1] = mt312_div(state->xtal, 22000 * 4);
 311
 312         ret = mt312_write(state, SYS_CLK, buf, sizeof(buf));
 313         if (ret < 0)
 314                 return ret;
 315
 316         ret = mt312_writereg(state, SNR_THS_HIGH, 0x32);
 317         if (ret < 0)
 318                 return ret;
 319
 320         /* different MOCLK polarity */
 321         switch (state->id) {
 322         case ID_ZL10313:
 323                 buf[0] = 0x33;
 324                 break;
 325         default:
 326                 buf[0] = 0x53;
 327                 break;
 328         }
 329
 330         ret = mt312_writereg(state, OP_CTRL, buf[0]);
 331         if (ret < 0)
 332                 return ret;
 333
 334         /* TS_SW_LIM */
 335         buf[0] = 0x8c;
 336         buf[1] = 0x98;
 337
 338         ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf));
 339         if (ret < 0)
 340                 return ret;
 341
 342         ret = mt312_writereg(state, CS_SW_LIM, 0x69);
 343         if (ret < 0)
 344                 return ret;
 345
 346         return 0;
 347 }
 348
 349 static int mt312_send_master_cmd(struct dvb_frontend *fe,
 350                                  struct dvb_diseqc_master_cmd *c)
 351 {
 352         struct mt312_state *state = fe->demodulator_priv;
 353         int ret;
 354         u8 diseqc_mode;
 355
 356         if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg)))
 357                 return -EINVAL;
 358
 359         ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
 360         if (ret < 0)
 361                 return ret;
 362
 363         ret = mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len);
 364         if (ret < 0)
 365                 return ret;
 366
 367         ret = mt312_writereg(state, DISEQC_MODE,
 368                              (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3)
 369                              | 0x04);
 370         if (ret < 0)
 371                 return ret;
 372
 373         /* is there a better way to wait for message to be transmitted */
 374         msleep(100);
 375
 376         /* set DISEQC_MODE[2:0] to zero if a return message is expected */
 377         if (c->msg[0] & 0x02) {
 378                 ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40));
 379                 if (ret < 0)
 380                         return ret;
 381         }
 382
 383         return 0;
 384 }
 385
 386 static int mt312_send_burst(struct dvb_frontend *fe,
 387                             const enum fe_sec_mini_cmd c)
 388 {
 389         struct mt312_state *state = fe->demodulator_priv;
 390         const u8 mini_tab[2] = { 0x02, 0x03 };
 391
 392         int ret;
 393         u8 diseqc_mode;
 394
 395         if (c > SEC_MINI_B)
 396                 return -EINVAL;
 397
 398         ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
 399         if (ret < 0)
 400                 return ret;
 401
 402         ret = mt312_writereg(state, DISEQC_MODE,
 403                              (diseqc_mode & 0x40) | mini_tab[c]);
 404         if (ret < 0)
 405                 return ret;
 406
 407         return 0;
 408 }
 409
 410 static int mt312_set_tone(struct dvb_frontend *fe,
 411                           const enum fe_sec_tone_mode t)
 412 {
 413         struct mt312_state *state = fe->demodulator_priv;
 414         const u8 tone_tab[2] = { 0x01, 0x00 };
 415
 416         int ret;
 417         u8 diseqc_mode;
 418
 419         if (t > SEC_TONE_OFF)
 420                 return -EINVAL;
 421
 422         ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
 423         if (ret < 0)
 424                 return ret;
 425
 426         ret = mt312_writereg(state, DISEQC_MODE,
 427                              (diseqc_mode & 0x40) | tone_tab[t]);
 428         if (ret < 0)
 429                 return ret;
 430
 431         return 0;
 432 }
 433
 434 static int mt312_set_voltage(struct dvb_frontend *fe,
 435                              const enum fe_sec_voltage v)
 436 {
 437         struct mt312_state *state = fe->demodulator_priv;
 438         const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
 439         u8 val;
 440
 441         if (v > SEC_VOLTAGE_OFF)
 442                 return -EINVAL;
 443
 444         val = volt_tab[v];
 445         if (state->config->voltage_inverted)
 446                 val ^= 0x40;
 447
 448         return mt312_writereg(state, DISEQC_MODE, val);
 449 }
 450
 451 static int mt312_read_status(struct dvb_frontend *fe, enum fe_status *s)
 452 {
 453         struct mt312_state *state = fe->demodulator_priv;
 454         int ret;
 455         u8 status[3];
 456
 457         *s = 0;
 458
 459         ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status));
 460         if (ret < 0)
 461                 return ret;
 462
 463         dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n",
 464                 status[0], status[1], status[2]);
 465
 466         if (status[0] & 0xc0)
 467                 *s |= FE_HAS_SIGNAL;    /* signal noise ratio */
 468         if (status[0] & 0x04)
 469                 *s |= FE_HAS_CARRIER;   /* qpsk carrier lock */
 470         if (status[2] & 0x02)
 471                 *s |= FE_HAS_VITERBI;   /* viterbi lock */
 472         if (status[2] & 0x04)
 473                 *s |= FE_HAS_SYNC;      /* byte align lock */
 474         if (status[0] & 0x01)
 475                 *s |= FE_HAS_LOCK;      /* qpsk lock */
 476
 477         return 0;
 478 }
 479
 480 static int mt312_read_ber(struct dvb_frontend *fe, u32 *ber)
 481 {
 482         struct mt312_state *state = fe->demodulator_priv;
 483         int ret;
 484         u8 buf[3];
 485
 486         ret = mt312_read(state, RS_BERCNT_H, buf, 3);
 487         if (ret < 0)
 488                 return ret;
 489
 490         *ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64;
 491
 492         return 0;
 493 }
 494
 495 static int mt312_read_signal_strength(struct dvb_frontend *fe,
 496                                       u16 *signal_strength)
 497 {
 498         struct mt312_state *state = fe->demodulator_priv;
 499         int ret;
 500         u8 buf[3];
 501         u16 agc;
 502         s16 err_db;
 503
 504         ret = mt312_read(state, AGC_H, buf, sizeof(buf));
 505         if (ret < 0)
 506                 return ret;
 507
 508         agc = (buf[0] << 6) | (buf[1] >> 2);
 509         err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6;
 510
 511         *signal_strength = agc;
 512
 513         dprintk("agc=%08x err_db=%hd\n", agc, err_db);
 514
 515         return 0;
 516 }
 517
 518 static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr)
 519 {
 520         struct mt312_state *state = fe->demodulator_priv;
 521         int ret;
 522         u8 buf[2];
 523
 524         ret = mt312_read(state, M_SNR_H, buf, sizeof(buf));
 525         if (ret < 0)
 526                 return ret;
 527
 528         *snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1);
 529
 530         return 0;
 531 }
 532
 533 static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc)
 534 {
 535         struct mt312_state *state = fe->demodulator_priv;
 536         int ret;
 537         u8 buf[2];
 538
 539         ret = mt312_read(state, RS_UBC_H, buf, sizeof(buf));
 540         if (ret < 0)
 541                 return ret;
 542
 543         *ubc = (buf[0] << 8) | buf[1];
 544
 545         return 0;
 546 }
 547
 548 static int mt312_set_frontend(struct dvb_frontend *fe)
 549 {
 550         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 551         struct mt312_state *state = fe->demodulator_priv;
 552         int ret;
 553         u8 buf[5], config_val;
 554         u16 sr;
 555
 556         const u8 fec_tab[10] =
 557             { 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f };
 558         const u8 inv_tab[3] = { 0x00, 0x40, 0x80 };
 559
 560         dprintk("%s: Freq %d\n", __func__, p->frequency);
 561
 562         if ((p->frequency < fe->ops.info.frequency_min_hz / kHz)
 563             || (p->frequency > fe->ops.info.frequency_max_hz / kHz))
 564                 return -EINVAL;
 565
 566         if (((int)p->inversion < INVERSION_OFF)
 567             || (p->inversion > INVERSION_ON))
 568                 return -EINVAL;
 569
 570         if ((p->symbol_rate < fe->ops.info.symbol_rate_min)
 571             || (p->symbol_rate > fe->ops.info.symbol_rate_max))
 572                 return -EINVAL;
 573
 574         if (((int)p->fec_inner < FEC_NONE)
 575             || (p->fec_inner > FEC_AUTO))
 576                 return -EINVAL;
 577
 578         if ((p->fec_inner == FEC_4_5)
 579             || (p->fec_inner == FEC_8_9))
 580                 return -EINVAL;
 581
 582         switch (state->id) {
 583         case ID_VP310:
 584         /* For now we will do this only for the VP310.
 585          * It should be better for the mt312 as well,
 586          * but tuning will be slower. ACCJr 09/29/03
 587          */
 588                 ret = mt312_readreg(state, CONFIG, &config_val);
 589                 if (ret < 0)
 590                         return ret;
 591                 if (p->symbol_rate >= 30000000) {
 592                         /* Note that 30MS/s should use 90MHz */
 593                         if (state->freq_mult == 6) {
 594                                 /* We are running 60MHz */
 595                                 state->freq_mult = 9;
 596                                 ret = mt312_initfe(fe);
 597                                 if (ret < 0)
 598                                         return ret;
 599                         }
 600                 } else {
 601                         if (state->freq_mult == 9) {
 602                                 /* We are running 90MHz */
 603                                 state->freq_mult = 6;
 604                                 ret = mt312_initfe(fe);
 605                                 if (ret < 0)
 606                                         return ret;
 607                         }
 608                 }
 609                 break;
 610
 611         case ID_MT312:
 612         case ID_ZL10313:
 613                 break;
 614
 615         default:
 616                 return -EINVAL;
 617         }
 618
 619         if (fe->ops.tuner_ops.set_params) {
 620                 fe->ops.tuner_ops.set_params(fe);
 621                 if (fe->ops.i2c_gate_ctrl)
 622                         fe->ops.i2c_gate_ctrl(fe, 0);
 623         }
 624
 625         /* sr = (u16)(sr * 256.0 / 1000000.0) */
 626         sr = mt312_div(p->symbol_rate * 4, 15625);
 627
 628         /* SYM_RATE */
 629         buf[0] = (sr >> 8) & 0x3f;
 630         buf[1] = (sr >> 0) & 0xff;
 631
 632         /* VIT_MODE */
 633         buf[2] = inv_tab[p->inversion] | fec_tab[p->fec_inner];
 634
 635         /* QPSK_CTRL */
 636         buf[3] = 0x40;          /* swap I and Q before QPSK demodulation */
 637
 638         if (p->symbol_rate < 10000000)
 639                 buf[3] |= 0x04; /* use afc mode */
 640
 641         /* GO */
 642         buf[4] = 0x01;
 643
 644         ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf));
 645         if (ret < 0)
 646                 return ret;
 647
 648         ret = mt312_reset(state, 0);
 649         if (ret < 0)
 650                 return ret;
 651
 652         return 0;
 653 }
 654
 655 static int mt312_get_frontend(struct dvb_frontend *fe,
 656                               struct dtv_frontend_properties *p)
 657 {
 658         struct mt312_state *state = fe->demodulator_priv;
 659         int ret;
 660
 661         ret = mt312_get_inversion(state, &p->inversion);
 662         if (ret < 0)
 663                 return ret;
 664
 665         ret = mt312_get_symbol_rate(state, &p->symbol_rate);
 666         if (ret < 0)
 667                 return ret;
 668
 669         ret = mt312_get_code_rate(state, &p->fec_inner);
 670         if (ret < 0)
 671                 return ret;
 672
 673         return 0;
 674 }
 675
 676 static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
 677 {
 678         struct mt312_state *state = fe->demodulator_priv;
 679
 680         u8 val = 0x00;
 681         int ret;
 682
 683         switch (state->id) {
 684         case ID_ZL10313:
 685                 ret = mt312_readreg(state, GPP_CTRL, &val);
 686                 if (ret < 0)
 687                         goto error;
 688
 689                 /* preserve this bit to not accidentally shutdown ADC */
 690                 val &= 0x80;
 691                 break;
 692         }
 693
 694         if (enable)
 695                 val |= 0x40;
 696         else
 697                 val &= ~0x40;
 698
 699         ret = mt312_writereg(state, GPP_CTRL, val);
 700
 701 error:
 702         return ret;
 703 }
 704
 705 static int mt312_sleep(struct dvb_frontend *fe)
 706 {
 707         struct mt312_state *state = fe->demodulator_priv;
 708         int ret;
 709         u8 config;
 710
 711         /* reset all registers to defaults */
 712         ret = mt312_reset(state, 1);
 713         if (ret < 0)
 714                 return ret;
 715
 716         if (state->id == ID_ZL10313) {
 717                 /* reset ADC */
 718                 ret = mt312_writereg(state, GPP_CTRL, 0x00);
 719                 if (ret < 0)
 720                         return ret;
 721
 722                 /* full shutdown of ADCs, mpeg bus tristated */
 723                 ret = mt312_writereg(state, HW_CTRL, 0x0d);
 724                 if (ret < 0)
 725                         return ret;
 726         }
 727
 728         ret = mt312_readreg(state, CONFIG, &config);
 729         if (ret < 0)
 730                 return ret;
 731
 732         /* enter standby */
 733         ret = mt312_writereg(state, CONFIG, config & 0x7f);
 734         if (ret < 0)
 735                 return ret;
 736
 737         return 0;
 738 }
 739
 740 static int mt312_get_tune_settings(struct dvb_frontend *fe,
 741                 struct dvb_frontend_tune_settings *fesettings)
 742 {
 743         fesettings->min_delay_ms = 50;
 744         fesettings->step_size = 0;
 745         fesettings->max_drift = 0;
 746         return 0;
 747 }
 748
 749 static void mt312_release(struct dvb_frontend *fe)
 750 {
 751         struct mt312_state *state = fe->demodulator_priv;
 752         kfree(state);
 753 }
 754
 755 #define MT312_SYS_CLK           90000000UL      /* 90 MHz */
 756 static const struct dvb_frontend_ops mt312_ops = {
 757         .delsys = { SYS_DVBS },
 758         .info = {
 759                 .name = "Zarlink ???? DVB-S",
 760                 .frequency_min_hz =  950 * MHz,
 761                 .frequency_max_hz = 2150 * MHz,
 762                 /* FIXME: adjust freq to real used xtal */
 763                 .frequency_stepsize_hz = MT312_PLL_CLK / 128,
 764                 .symbol_rate_min = MT312_SYS_CLK / 128, /* FIXME as above */
 765                 .symbol_rate_max = MT312_SYS_CLK / 2,
 766                 .caps =
 767                     FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
 768                     FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
 769                     FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
 770                     FE_CAN_RECOVER
 771         },
 772
 773         .release = mt312_release,
 774
 775         .init = mt312_initfe,
 776         .sleep = mt312_sleep,
 777         .i2c_gate_ctrl = mt312_i2c_gate_ctrl,
 778
 779         .set_frontend = mt312_set_frontend,
 780         .get_frontend = mt312_get_frontend,
 781         .get_tune_settings = mt312_get_tune_settings,
 782
 783         .read_status = mt312_read_status,
 784         .read_ber = mt312_read_ber,
 785         .read_signal_strength = mt312_read_signal_strength,
 786         .read_snr = mt312_read_snr,
 787         .read_ucblocks = mt312_read_ucblocks,
 788
 789         .diseqc_send_master_cmd = mt312_send_master_cmd,
 790         .diseqc_send_burst = mt312_send_burst,
 791         .set_tone = mt312_set_tone,
 792         .set_voltage = mt312_set_voltage,
 793 };
 794
 795 struct dvb_frontend *mt312_attach(const struct mt312_config *config,
 796                                         struct i2c_adapter *i2c)
 797 {
 798         struct mt312_state *state = NULL;
 799
 800         /* allocate memory for the internal state */
 801         state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
 802         if (state == NULL)
 803                 goto error;
 804
 805         /* setup the state */
 806         state->config = config;
 807         state->i2c = i2c;
 808
 809         /* check if the demod is there */
 810         if (mt312_readreg(state, ID, &state->id) < 0)
 811                 goto error;
 812
 813         /* create dvb_frontend */
 814         memcpy(&state->frontend.ops, &mt312_ops,
 815                 sizeof(struct dvb_frontend_ops));
 816         state->frontend.demodulator_priv = state;
 817
 818         switch (state->id) {
 819         case ID_VP310:
 820                 strscpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S",
 821                         sizeof(state->frontend.ops.info.name));
 822                 state->xtal = MT312_PLL_CLK;
 823                 state->freq_mult = 9;
 824                 break;
 825         case ID_MT312:
 826                 strscpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S",
 827                         sizeof(state->frontend.ops.info.name));
 828                 state->xtal = MT312_PLL_CLK;
 829                 state->freq_mult = 6;
 830                 break;
 831         case ID_ZL10313:
 832                 strscpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S",
 833                         sizeof(state->frontend.ops.info.name));
 834                 state->xtal = MT312_PLL_CLK_10_111;
 835                 state->freq_mult = 9;
 836                 break;
 837         default:
 838                 printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313 are supported chips.\n");
 839                 goto error;
 840         }
 841
 842         return &state->frontend;
 843
 844 error:
 845         kfree(state);
 846         return NULL;
 847 }
 848 EXPORT_SYMBOL(mt312_attach);
 849
 850 module_param(debug, int, 0644);
 851 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 852
 853 MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
 854 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
 855 MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>");
 856 MODULE_LICENSE("GPL");
 857