[mirror_ubuntu-jammy-kernel.git] / drivers / media / i2c / Kconfig

# SPDX-License-Identifier: GPL-2.0-only
#
# Multimedia Video device configuration
#

if VIDEO_V4L2

comment "IR I2C driver auto-selected by 'Autoselect ancillary drivers'"
        depends on MEDIA_SUBDRV_AUTOSELECT && I2C && RC_CORE

config VIDEO_IR_I2C
        tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT || EXPERT
        depends on I2C && RC_CORE
        default y
        help
          Most boards have an IR chip directly connected via GPIO. However,
          some video boards have the IR connected via I2C bus.

          If your board doesn't have an I2C IR chip, you may disable this
          option.

          In doubt, say Y.

#
# V4L2 I2C drivers that aren't related with Camera support
#

comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'"
        depends on MEDIA_HIDE_ANCILLARY_SUBDRV
#
# Encoder / Decoder module configuration
#

menu "Audio decoders, processors and mixers"
        visible if !MEDIA_HIDE_ANCILLARY_SUBDRV

config VIDEO_TVAUDIO
        tristate "Simple audio decoder chips"
        depends on VIDEO_V4L2 && I2C
        help
          Support for several audio decoder chips found on some bt8xx boards:
          Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
                   tea6320, tea6420, tda8425, ta8874z.
          Microchip: pic16c54 based design on ProVideo PV951 board.

          To compile this driver as a module, choose M here: the
          module will be called tvaudio.

config VIDEO_TDA7432
        tristate "Philips TDA7432 audio processor"
        depends on VIDEO_V4L2 && I2C
        help
          Support for tda7432 audio decoder chip found on some bt8xx boards.

          To compile this driver as a module, choose M here: the
          module will be called tda7432.

config VIDEO_TDA9840
        tristate "Philips TDA9840 audio processor"
        depends on I2C
        help
          Support for tda9840 audio decoder chip found on some Zoran boards.

          To compile this driver as a module, choose M here: the
          module will be called tda9840.

config VIDEO_TDA1997X
        tristate "NXP TDA1997x HDMI receiver"
        depends on VIDEO_V4L2 && I2C
        depends on SND_SOC
        select HDMI
        select SND_PCM
        select V4L2_FWNODE
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.

          To compile this driver as a module, choose M here: the
          module will be called tda1997x.

config VIDEO_TEA6415C
        tristate "Philips TEA6415C audio processor"
        depends on I2C
        help
          Support for tea6415c audio decoder chip found on some bt8xx boards.

          To compile this driver as a module, choose M here: the
          module will be called tea6415c.

config VIDEO_TEA6420
        tristate "Philips TEA6420 audio processor"
        depends on I2C
        help
          Support for tea6420 audio decoder chip found on some bt8xx boards.

          To compile this driver as a module, choose M here: the
          module will be called tea6420.

config VIDEO_MSP3400
        tristate "Micronas MSP34xx audio decoders"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Micronas MSP34xx series of audio decoders.

          To compile this driver as a module, choose M here: the
          module will be called msp3400.

config VIDEO_CS3308
        tristate "Cirrus Logic CS3308 audio ADC"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Cirrus Logic CS3308 High Performance 8-Channel
          Analog Volume Control

          To compile this driver as a module, choose M here: the
          module will be called cs3308.

config VIDEO_CS5345
        tristate "Cirrus Logic CS5345 audio ADC"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Cirrus Logic CS5345 24-bit, 192 kHz
          stereo A/D converter.

          To compile this driver as a module, choose M here: the
          module will be called cs5345.

config VIDEO_CS53L32A
        tristate "Cirrus Logic CS53L32A audio ADC"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Cirrus Logic CS53L32A low voltage
          stereo A/D converter.

          To compile this driver as a module, choose M here: the
          module will be called cs53l32a.

config VIDEO_TLV320AIC23B
        tristate "Texas Instruments TLV320AIC23B audio codec"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Texas Instruments TLV320AIC23B audio codec.

          To compile this driver as a module, choose M here: the
          module will be called tlv320aic23b.

config VIDEO_UDA1342
        tristate "Philips UDA1342 audio codec"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Philips UDA1342 audio codec.

          To compile this driver as a module, choose M here: the
          module will be called uda1342.

config VIDEO_WM8775
        tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Wolfson Microelectronics WM8775 high
          performance stereo A/D Converter with a 4 channel input mixer.

          To compile this driver as a module, choose M here: the
          module will be called wm8775.

config VIDEO_WM8739
        tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Wolfson Microelectronics WM8739
          stereo A/D Converter.

          To compile this driver as a module, choose M here: the
          module will be called wm8739.

config VIDEO_VP27SMPX
        tristate "Panasonic VP27's internal MPX"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the internal MPX of the Panasonic VP27s tuner.

          To compile this driver as a module, choose M here: the
          module will be called vp27smpx.

config VIDEO_SONY_BTF_MPX
        tristate "Sony BTF's internal MPX"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the internal MPX of the Sony BTF-PG472Z tuner.

          To compile this driver as a module, choose M here: the
          module will be called sony-btf-mpx.
endmenu

menu "RDS decoders"
        visible if !MEDIA_HIDE_ANCILLARY_SUBDRV

config VIDEO_SAA6588
        tristate "SAA6588 Radio Chip RDS decoder support"
        depends on VIDEO_V4L2 && I2C

        help
          Support for this Radio Data System (RDS) decoder. This allows
          seeing radio station identification transmitted using this
          standard.

          To compile this driver as a module, choose M here: the
          module will be called saa6588.
endmenu

menu "Video decoders"
        visible if !MEDIA_HIDE_ANCILLARY_SUBDRV

config VIDEO_ADV7180
        tristate "Analog Devices ADV7180 decoder"
        depends on GPIOLIB && VIDEO_V4L2 && I2C
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          Support for the Analog Devices ADV7180 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called adv7180.

config VIDEO_ADV7183
        tristate "Analog Devices ADV7183 decoder"
        depends on VIDEO_V4L2 && I2C
        help
          V4l2 subdevice driver for the Analog Devices
          ADV7183 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called adv7183.

config VIDEO_ADV748X
        tristate "Analog Devices ADV748x decoder"
        depends on VIDEO_V4L2 && I2C
        depends on OF
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select REGMAP_I2C
        select V4L2_FWNODE
        help
          V4L2 subdevice driver for the Analog Devices
          ADV7481 and ADV7482 HDMI/Analog video decoders.

          To compile this driver as a module, choose M here: the
          module will be called adv748x.

config VIDEO_ADV7604
        tristate "Analog Devices ADV7604 decoder"
        depends on VIDEO_V4L2 && I2C
        depends on GPIOLIB || COMPILE_TEST
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select REGMAP_I2C
        select HDMI
        select V4L2_FWNODE
        help
          Support for the Analog Devices ADV7604 video decoder.

          This is a Analog Devices Component/Graphics Digitizer
          with 4:1 Multiplexed HDMI Receiver.

          To compile this driver as a module, choose M here: the
          module will be called adv7604.

config VIDEO_ADV7604_CEC
        bool "Enable Analog Devices ADV7604 CEC support"
        depends on VIDEO_ADV7604
        select CEC_CORE
        help
          When selected the adv7604 will support the optional
          HDMI CEC feature.

config VIDEO_ADV7842
        tristate "Analog Devices ADV7842 decoder"
        depends on VIDEO_V4L2 && I2C
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select HDMI
        help
          Support for the Analog Devices ADV7842 video decoder.

          This is a Analog Devices Component/Graphics/SD Digitizer
          with 2:1 Multiplexed HDMI Receiver.

          To compile this driver as a module, choose M here: the
          module will be called adv7842.

config VIDEO_ADV7842_CEC
        bool "Enable Analog Devices ADV7842 CEC support"
        depends on VIDEO_ADV7842
        select CEC_CORE
        help
          When selected the adv7842 will support the optional
          HDMI CEC feature.

config VIDEO_BT819
        tristate "BT819A VideoStream decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for BT819A video decoder.

          To compile this driver as a module, choose M here: the
          module will be called bt819.

config VIDEO_BT856
        tristate "BT856 VideoStream decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for BT856 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called bt856.

config VIDEO_BT866
        tristate "BT866 VideoStream decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for BT866 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called bt866.

config VIDEO_KS0127
        tristate "KS0127 video decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for KS0127 video decoder.

          This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
          cards.

          To compile this driver as a module, choose M here: the
          module will be called ks0127.

config VIDEO_ML86V7667
        tristate "OKI ML86V7667 video decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the OKI Semiconductor ML86V7667 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called ml86v7667.

config VIDEO_SAA7110
        tristate "Philips SAA7110 video decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Philips SAA7110 video decoders.

          To compile this driver as a module, choose M here: the
          module will be called saa7110.

config VIDEO_SAA711X
        tristate "Philips SAA7111/3/4/5 video decoders"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Philips SAA7111/3/4/5 video decoders.

          To compile this driver as a module, choose M here: the
          module will be called saa7115.

config VIDEO_TC358743
        tristate "Toshiba TC358743 decoder"
        depends on VIDEO_V4L2 && I2C
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select HDMI
        select V4L2_FWNODE
        help
          Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.

          To compile this driver as a module, choose M here: the
          module will be called tc358743.

config VIDEO_TC358743_CEC
        bool "Enable Toshiba TC358743 CEC support"
        depends on VIDEO_TC358743
        select CEC_CORE
        help
          When selected the tc358743 will support the optional
          HDMI CEC feature.

config VIDEO_TVP514X
        tristate "Texas Instruments TVP514x video decoder"
        depends on VIDEO_V4L2 && I2C
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the TI TVP5146/47
          decoder. It is currently working with the TI OMAP3 camera
          controller.

          To compile this driver as a module, choose M here: the
          module will be called tvp514x.

config VIDEO_TVP5150
        tristate "Texas Instruments TVP5150 video decoder"
        depends on VIDEO_V4L2 && I2C
        select V4L2_FWNODE
        select REGMAP_I2C
        help
          Support for the Texas Instruments TVP5150 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called tvp5150.

config VIDEO_TVP7002
        tristate "Texas Instruments TVP7002 video decoder"
        depends on VIDEO_V4L2 && I2C
        select V4L2_FWNODE
        help
          Support for the Texas Instruments TVP7002 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called tvp7002.

config VIDEO_TW2804
        tristate "Techwell TW2804 multiple video decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Techwell tw2804 multiple video decoder.

          To compile this driver as a module, choose M here: the
          module will be called tw2804.

config VIDEO_TW9903
        tristate "Techwell TW9903 video decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Techwell tw9903 multi-standard video decoder
          with high quality down scaler.

          To compile this driver as a module, choose M here: the
          module will be called tw9903.

config VIDEO_TW9906
        tristate "Techwell TW9906 video decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Techwell tw9906 enhanced multi-standard comb filter
          video decoder with YCbCr input support.

          To compile this driver as a module, choose M here: the
          module will be called tw9906.

config VIDEO_TW9910
        tristate "Techwell TW9910 video decoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.

          To compile this driver as a module, choose M here: the
          module will be called tw9910.

config VIDEO_VPX3220
        tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
        depends on VIDEO_V4L2 && I2C
        help
          Support for VPX322x video decoders.

          To compile this driver as a module, choose M here: the
          module will be called vpx3220.

config VIDEO_MAX9286
        tristate "Maxim MAX9286 GMSL deserializer support"
        depends on I2C && I2C_MUX
        depends on OF_GPIO
        select V4L2_FWNODE
        select VIDEO_V4L2_SUBDEV_API
        select MEDIA_CONTROLLER
        help
          This driver supports the Maxim MAX9286 GMSL deserializer.

          To compile this driver as a module, choose M here: the
          module will be called max9286.

comment "Video and audio decoders"

config VIDEO_SAA717X
        tristate "Philips SAA7171/3/4 audio/video decoders"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Philips SAA7171/3/4 audio/video decoders.

          To compile this driver as a module, choose M here: the
          module will be called saa717x.

source "drivers/media/i2c/cx25840/Kconfig"

endmenu

menu "Video encoders"
        visible if !MEDIA_HIDE_ANCILLARY_SUBDRV

config VIDEO_SAA7127
        tristate "Philips SAA7127/9 digital video encoders"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Philips SAA7127/9 digital video encoders.

          To compile this driver as a module, choose M here: the
          module will be called saa7127.

config VIDEO_SAA7185
        tristate "Philips SAA7185 video encoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Philips SAA7185 video encoder.

          To compile this driver as a module, choose M here: the
          module will be called saa7185.

config VIDEO_ADV7170
        tristate "Analog Devices ADV7170 video encoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Analog Devices ADV7170 video encoder driver

          To compile this driver as a module, choose M here: the
          module will be called adv7170.

config VIDEO_ADV7175
        tristate "Analog Devices ADV7175 video encoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Analog Devices ADV7175 video encoder driver

          To compile this driver as a module, choose M here: the
          module will be called adv7175.

config VIDEO_ADV7343
        tristate "ADV7343 video encoder"
        depends on I2C
        help
          Support for Analog Devices I2C bus based ADV7343 encoder.

          To compile this driver as a module, choose M here: the
          module will be called adv7343.

config VIDEO_ADV7393
        tristate "ADV7393 video encoder"
        depends on I2C
        help
          Support for Analog Devices I2C bus based ADV7393 encoder.

          To compile this driver as a module, choose M here: the
          module will be called adv7393.

config VIDEO_ADV7511
        tristate "Analog Devices ADV7511 encoder"
        depends on VIDEO_V4L2 && I2C
        depends on DRM_I2C_ADV7511=n || COMPILE_TEST
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select HDMI
        help
          Support for the Analog Devices ADV7511 video encoder.

          This is a Analog Devices HDMI transmitter.

          To compile this driver as a module, choose M here: the
          module will be called adv7511.

config VIDEO_ADV7511_CEC
        bool "Enable Analog Devices ADV7511 CEC support"
        depends on VIDEO_ADV7511
        select CEC_CORE
        help
          When selected the adv7511 will support the optional
          HDMI CEC feature.

config VIDEO_AD9389B
        tristate "Analog Devices AD9389B encoder"
        depends on VIDEO_V4L2 && I2C
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API

        help
          Support for the Analog Devices AD9389B video encoder.

          This is a Analog Devices HDMI transmitter.

          To compile this driver as a module, choose M here: the
          module will be called ad9389b.

config VIDEO_AK881X
        tristate "AK8813/AK8814 video encoders"
        depends on I2C
        help
          Video output driver for AKM AK8813 and AK8814 TV encoders

config VIDEO_THS8200
        tristate "Texas Instruments THS8200 video encoder"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the Texas Instruments THS8200 video encoder.

          To compile this driver as a module, choose M here: the
          module will be called ths8200.
endmenu

menu "Video improvement chips"
        visible if !MEDIA_HIDE_ANCILLARY_SUBDRV

config VIDEO_UPD64031A
        tristate "NEC Electronics uPD64031A Ghost Reduction"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the NEC Electronics uPD64031A Ghost Reduction
          video chip. It is most often found in NTSC TV cards made for
          Japan and is used to reduce the 'ghosting' effect that can
          be present in analog TV broadcasts.

          To compile this driver as a module, choose M here: the
          module will be called upd64031a.

config VIDEO_UPD64083
        tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
        depends on VIDEO_V4L2 && I2C
        help
          Support for the NEC Electronics uPD64083 3-Dimensional Y/C
          separation video chip. It is used to improve the quality of
          the colors of a composite signal.

          To compile this driver as a module, choose M here: the
          module will be called upd64083.
endmenu

menu "Audio/Video compression chips"
        visible if !MEDIA_HIDE_ANCILLARY_SUBDRV

config VIDEO_SAA6752HS
        tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
        depends on VIDEO_V4L2 && I2C
        select CRC32
        help
          Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
          audio encoder with multiplexer.

          To compile this driver as a module, choose M here: the
          module will be called saa6752hs.

endmenu

menu "SDR tuner chips"
        visible if !MEDIA_HIDE_ANCILLARY_SUBDRV

config SDR_MAX2175
        tristate "Maxim 2175 RF to Bits tuner"
        depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
        select REGMAP_I2C
        help
          Support for Maxim 2175 tuner. It is an advanced analog/digital
          radio receiver with RF-to-Bits front-end designed for SDR solutions.

          To compile this driver as a module, choose M here; the
          module will be called max2175.


endmenu

menu "Miscellaneous helper chips"
        visible if !MEDIA_HIDE_ANCILLARY_SUBDRV

config VIDEO_THS7303
        tristate "THS7303/53 Video Amplifier"
        depends on VIDEO_V4L2 && I2C
        help
          Support for TI THS7303/53 video amplifier

          To compile this driver as a module, choose M here: the
          module will be called ths7303.

config VIDEO_M52790
        tristate "Mitsubishi M52790 A/V switch"
        depends on VIDEO_V4L2 && I2C
        help
         Support for the Mitsubishi M52790 A/V switch.

         To compile this driver as a module, choose M here: the
         module will be called m52790.

config VIDEO_I2C
        tristate "I2C transport video support"
        depends on VIDEO_V4L2 && I2C
        select VIDEOBUF2_VMALLOC
        imply HWMON
        help
          Enable the I2C transport video support which supports the
          following:
           * Panasonic AMG88xx Grid-Eye Sensors
           * Melexis MLX90640 Thermal Cameras

          To compile this driver as a module, choose M here: the
          module will be called video-i2c

config VIDEO_ST_MIPID02
        tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
          It is used to allow usage of CSI-2 sensor with PARALLEL port
          controller.

          To compile this driver as a module, choose M here: the
          module will be called st-mipid02.
endmenu

#
# V4L2 I2C drivers that are related with Camera support
#

menu "Camera sensor devices"
        visible if MEDIA_CAMERA_SUPPORT

config VIDEO_APTINA_PLL
        tristate

config VIDEO_CCS_PLL
        tristate

config VIDEO_HI556
        tristate "Hynix Hi-556 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the Hynix
          Hi-556 camera.

          To compile this driver as a module, choose M here: the
          module will be called hi556.

config VIDEO_IMX214
        tristate "Sony IMX214 sensor support"
        depends on GPIOLIB && I2C && VIDEO_V4L2
        select V4L2_FWNODE
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select REGMAP_I2C
        help
          This is a Video4Linux2 sensor driver for the Sony
          IMX214 camera.

          To compile this driver as a module, choose M here: the
          module will be called imx214.

config VIDEO_IMX219
        tristate "Sony IMX219 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the Sony
          IMX219 camera.

          To compile this driver as a module, choose M here: the
          module will be called imx219.

config VIDEO_IMX258
        tristate "Sony IMX258 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This is a Video4Linux2 sensor driver for the Sony
          IMX258 camera.

          To compile this driver as a module, choose M here: the
          module will be called imx258.

config VIDEO_IMX274
        tristate "Sony IMX274 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select REGMAP_I2C
        help
          This is a V4L2 sensor driver for the Sony IMX274
          CMOS image sensor.

config VIDEO_IMX290
        tristate "Sony IMX290 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select REGMAP_I2C
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the Sony
          IMX290 camera sensor.

          To compile this driver as a module, choose M here: the
          module will be called imx290.

config VIDEO_IMX319
        tristate "Sony IMX319 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This is a Video4Linux2 sensor driver for the Sony
          IMX319 camera.

          To compile this driver as a module, choose M here: the
          module will be called imx319.

config VIDEO_IMX355
        tristate "Sony IMX355 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This is a Video4Linux2 sensor driver for the Sony
          IMX355 camera.

          To compile this driver as a module, choose M here: the
          module will be called imx355.

config VIDEO_OV02A10
        tristate "OmniVision OV02A10 sensor support"
        depends on VIDEO_V4L2 && I2C
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV02A10 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov02a10.

config VIDEO_OV2640
        tristate "OmniVision OV2640 sensor support"
        depends on VIDEO_V4L2 && I2C
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV2640 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov2640.

config VIDEO_OV2659
        tristate "OmniVision OV2659 sensor support"
        depends on VIDEO_V4L2 && I2C && GPIOLIB
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV2659 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov2659.

config VIDEO_OV2680
        tristate "OmniVision OV2680 sensor support"
        depends on VIDEO_V4L2 && I2C
        select MEDIA_CONTROLLER
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV2680 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov2680.

config VIDEO_OV2685
        tristate "OmniVision OV2685 sensor support"
        depends on VIDEO_V4L2 && I2C
        select MEDIA_CONTROLLER
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV2685 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov2685.

config VIDEO_OV2740
        tristate "OmniVision OV2740 sensor support"
        depends on VIDEO_V4L2 && I2C
        depends on ACPI || COMPILE_TEST
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        select REGMAP_I2C
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV2740 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov2740.

config VIDEO_OV5640
        tristate "OmniVision OV5640 sensor support"
        depends on OF
        depends on GPIOLIB && VIDEO_V4L2 && I2C
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the Omnivision
          OV5640 camera sensor with a MIPI CSI-2 interface.

config VIDEO_OV5645
        tristate "OmniVision OV5645 sensor support"
        depends on OF
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV5645 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov5645.

config VIDEO_OV5647
        tristate "OmniVision OV5647 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV5647 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov5647.

config VIDEO_OV6650
        tristate "OmniVision OV6650 sensor support"
        depends on I2C && VIDEO_V4L2
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV6650 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov6650.

config VIDEO_OV5670
        tristate "OmniVision OV5670 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV5670 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov5670.

config VIDEO_OV5675
        tristate "OmniVision OV5675 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV5675 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov5675.

config VIDEO_OV5695
        tristate "OmniVision OV5695 sensor support"
        depends on I2C && VIDEO_V4L2
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV5695 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov5695.

config VIDEO_OV7251
        tristate "OmniVision OV7251 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV7251 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov7251.

config VIDEO_OV772X
        tristate "OmniVision OV772x sensor support"
        depends on I2C && VIDEO_V4L2
        select REGMAP_SCCB
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV772x camera.

          To compile this driver as a module, choose M here: the
          module will be called ov772x.

config VIDEO_OV7640
        tristate "OmniVision OV7640 sensor support"
        depends on I2C && VIDEO_V4L2
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV7640 camera.

          To compile this driver as a module, choose M here: the
          module will be called ov7640.

config VIDEO_OV7670
        tristate "OmniVision OV7670 sensor support"
        depends on I2C && VIDEO_V4L2
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV7670 VGA camera.  It currently only works with the M88ALP01
          controller.

config VIDEO_OV7740
        tristate "OmniVision OV7740 sensor support"
        depends on I2C && VIDEO_V4L2
        select REGMAP_SCCB
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV7740 VGA camera sensor.

config VIDEO_OV8856
        tristate "OmniVision OV8856 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV8856 camera sensor.

          To compile this driver as a module, choose M here: the
          module will be called ov8856.

config VIDEO_OV9640
        tristate "OmniVision OV9640 sensor support"
        depends on I2C && VIDEO_V4L2
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV9640 camera sensor.

config VIDEO_OV9650
        tristate "OmniVision OV9650/OV9652 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select REGMAP_SCCB
        help
          This is a V4L2 sensor driver for the Omnivision
          OV9650 and OV9652 camera sensors.

config VIDEO_OV9734
        tristate "OmniVision OV9734 sensor support"
        depends on VIDEO_V4L2 && I2C
        depends on ACPI || COMPILE_TEST
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV9734 camera.

          To compile this driver as a module, choose M here: the
          module's name is ov9734.

config VIDEO_OV13858
        tristate "OmniVision OV13858 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the OmniVision
          OV13858 camera.

config VIDEO_VS6624
        tristate "ST VS6624 sensor support"
        depends on VIDEO_V4L2 && I2C
        help
          This is a Video4Linux2 sensor driver for the ST VS6624
          camera.

          To compile this driver as a module, choose M here: the
          module will be called vs6624.

config VIDEO_MT9M001
        tristate "mt9m001 support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This driver supports MT9M001 cameras from Micron, monochrome
          and colour models.

config VIDEO_MT9M032
        tristate "MT9M032 camera sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select VIDEO_APTINA_PLL
        help
          This driver supports MT9M032 camera sensors from Aptina, monochrome
          models only.

config VIDEO_MT9M111
        tristate "mt9m111, mt9m112 and mt9m131 support"
        depends on I2C && VIDEO_V4L2
        select V4L2_FWNODE
        help
          This driver supports MT9M111, MT9M112 and MT9M131 cameras from
          Micron/Aptina

config VIDEO_MT9P031
        tristate "Aptina MT9P031 support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select VIDEO_APTINA_PLL
        help
          This is a Video4Linux2 sensor driver for the Aptina
          (Micron) mt9p031 5 Mpixel camera.

config VIDEO_MT9T001
        tristate "Aptina MT9T001 support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This is a Video4Linux2 sensor driver for the Aptina
          (Micron) mt0t001 3 Mpixel camera.

config VIDEO_MT9T112
        tristate "Aptina MT9T111/MT9T112 support"
        depends on I2C && VIDEO_V4L2
        help
          This is a Video4Linux2 sensor driver for the Aptina
          (Micron) MT9T111 and MT9T112 3 Mpixel camera.

          To compile this driver as a module, choose M here: the
          module will be called mt9t112.

config VIDEO_MT9V011
        tristate "Micron mt9v011 sensor support"
        depends on I2C && VIDEO_V4L2
        help
          This is a Video4Linux2 sensor driver for the Micron
          mt0v011 1.3 Mpixel camera.  It currently only works with the
          em28xx driver.

config VIDEO_MT9V032
        tristate "Micron MT9V032 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select REGMAP_I2C
        select V4L2_FWNODE
        help
          This is a Video4Linux2 sensor driver for the Micron
          MT9V032 752x480 CMOS sensor.

config VIDEO_MT9V111
        tristate "Aptina MT9V111 sensor support"
        depends on I2C && VIDEO_V4L2
        help
          This is a Video4Linux2 sensor driver for the Aptina/Micron
          MT9V111 sensor.

          To compile this driver as a module, choose M here: the
          module will be called mt9v111.

config VIDEO_SR030PC30
        tristate "Siliconfile SR030PC30 sensor support"
        depends on I2C && VIDEO_V4L2
        help
          This driver supports SR030PC30 VGA camera from Siliconfile

config VIDEO_NOON010PC30
        tristate "Siliconfile NOON010PC30 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This driver supports NOON010PC30 CIF camera from Siliconfile

source "drivers/media/i2c/m5mols/Kconfig"

config VIDEO_RDACM20
        tristate "IMI RDACM20 camera support"
        depends on I2C
        select V4L2_FWNODE
        select VIDEO_V4L2_SUBDEV_API
        select MEDIA_CONTROLLER
        help
          This driver supports the IMI RDACM20 GMSL camera, used in
          ADAS systems.

          This camera should be used in conjunction with a GMSL
          deserialiser such as the MAX9286.

config VIDEO_RJ54N1
        tristate "Sharp RJ54N1CB0C sensor support"
        depends on I2C && VIDEO_V4L2
        help
          This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
          sensor.

          To compile this driver as a module, choose M here: the
          module will be called rj54n1.

config VIDEO_S5K6AA
        tristate "Samsung S5K6AAFX sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
          camera sensor with an embedded SoC image signal processor.

config VIDEO_S5K6A3
        tristate "Samsung S5K6A3 sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This is a V4L2 sensor driver for Samsung S5K6A3 raw
          camera sensor.

config VIDEO_S5K4ECGX
        tristate "Samsung S5K4ECGX sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select CRC32
        help
          This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
          camera sensor with an embedded SoC image signal processor.

config VIDEO_S5K5BAF
        tristate "Samsung S5K5BAF sensor support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a V4L2 sensor driver for Samsung S5K5BAF 2M
          camera sensor with an embedded SoC image signal processor.

source "drivers/media/i2c/ccs/Kconfig"
source "drivers/media/i2c/et8ek8/Kconfig"

config VIDEO_S5C73M3
        tristate "Samsung S5C73M3 sensor support"
        depends on I2C && SPI && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a V4L2 sensor driver for Samsung S5C73M3
          8 Mpixel camera.

endmenu

menu "Lens drivers"
        visible if MEDIA_CAMERA_SUPPORT

config VIDEO_AD5820
        tristate "AD5820 lens voice coil support"
        depends on GPIOLIB && I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        help
          This is a driver for the AD5820 camera lens voice coil.
          It is used for example in Nokia N900 (RX-51).

config VIDEO_AK7375
        tristate "AK7375 lens voice coil support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This is a driver for the AK7375 camera lens voice coil.
          AK7375 is a 12 bit DAC with 120mA output current sink
          capability. This is designed for linear control of
          voice coil motors, controlled via I2C serial interface.

config VIDEO_DW9714
        tristate "DW9714 lens voice coil support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This is a driver for the DW9714 camera lens voice coil.
          DW9714 is a 10 bit DAC with 120mA output current sink
          capability. This is designed for linear control of
          voice coil motors, controlled via I2C serial interface.

config VIDEO_DW9768
        tristate "DW9768 lens voice coil support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
          This is a driver for the DW9768 camera lens voice coil.
          DW9768 is a 10 bit DAC with 100mA output current sink
          capability. This is designed for linear control of
          voice coil motors, controlled via I2C serial interface.

config VIDEO_DW9807_VCM
        tristate "DW9807 lens voice coil support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
        help
          This is a driver for the DW9807 camera lens voice coil.
          DW9807 is a 10 bit DAC with 100mA output current sink
          capability. This is designed for linear control of
          voice coil motors, controlled via I2C serial interface.

endmenu

menu "Flash devices"
        visible if MEDIA_CAMERA_SUPPORT

config VIDEO_ADP1653
        tristate "ADP1653 flash support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        help
          This is a driver for the ADP1653 flash controller. It is used for
          example in Nokia N900.

config VIDEO_LM3560
        tristate "LM3560 dual flash driver support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select REGMAP_I2C
        help
          This is a driver for the lm3560 dual flash controllers. It controls
          flash, torch LEDs.

config VIDEO_LM3646
        tristate "LM3646 dual flash driver support"
        depends on I2C && VIDEO_V4L2
        select MEDIA_CONTROLLER
        select REGMAP_I2C
        help
          This is a driver for the lm3646 dual flash controllers. It controls
          flash, torch LEDs.
endmenu

endif # VIDEO_V4L2