drivers/media/i2c/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # Multimedia Video device configuration
   4 #
   5
   6 if VIDEO_V4L2
   7
   8 comment "IR I2C driver auto-selected by 'Autoselect ancillary drivers'"
   9         depends on MEDIA_SUBDRV_AUTOSELECT && I2C && RC_CORE
  10
  11 config VIDEO_IR_I2C
  12         tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT || EXPERT
  13         depends on I2C && RC_CORE
  14         default y
  15         help
  16           Most boards have an IR chip directly connected via GPIO. However,
  17           some video boards have the IR connected via I2C bus.
  18
  19           If your board doesn't have an I2C IR chip, you may disable this
  20           option.
  21
  22           In doubt, say Y.
  23
  24 #
  25 # V4L2 I2C drivers that aren't related with Camera support
  26 #
  27
  28 comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'"
  29         depends on MEDIA_HIDE_ANCILLARY_SUBDRV
  30 #
  31 # Encoder / Decoder module configuration
  32 #
  33
  34 menu "Audio decoders, processors and mixers"
  35         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
  36
  37 config VIDEO_TVAUDIO
  38         tristate "Simple audio decoder chips"
  39         depends on VIDEO_V4L2 && I2C
  40         help
  41           Support for several audio decoder chips found on some bt8xx boards:
  42           Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
  43                    tea6320, tea6420, tda8425, ta8874z.
  44           Microchip: pic16c54 based design on ProVideo PV951 board.
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called tvaudio.
  48
  49 config VIDEO_TDA7432
  50         tristate "Philips TDA7432 audio processor"
  51         depends on VIDEO_V4L2 && I2C
  52         help
  53           Support for tda7432 audio decoder chip found on some bt8xx boards.
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called tda7432.
  57
  58 config VIDEO_TDA9840
  59         tristate "Philips TDA9840 audio processor"
  60         depends on I2C
  61         help
  62           Support for tda9840 audio decoder chip found on some Zoran boards.
  63
  64           To compile this driver as a module, choose M here: the
  65           module will be called tda9840.
  66
  67 config VIDEO_TDA1997X
  68         tristate "NXP TDA1997x HDMI receiver"
  69         depends on VIDEO_V4L2 && I2C
  70         depends on SND_SOC
  71         select HDMI
  72         select SND_PCM
  73         select V4L2_FWNODE
  74         select MEDIA_CONTROLLER
  75         select VIDEO_V4L2_SUBDEV_API
  76         help
  77           V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called tda1997x.
  81
  82 config VIDEO_TEA6415C
  83         tristate "Philips TEA6415C audio processor"
  84         depends on I2C
  85         help
  86           Support for tea6415c audio decoder chip found on some bt8xx boards.
  87
  88           To compile this driver as a module, choose M here: the
  89           module will be called tea6415c.
  90
  91 config VIDEO_TEA6420
  92         tristate "Philips TEA6420 audio processor"
  93         depends on I2C
  94         help
  95           Support for tea6420 audio decoder chip found on some bt8xx boards.
  96
  97           To compile this driver as a module, choose M here: the
  98           module will be called tea6420.
  99
 100 config VIDEO_MSP3400
 101         tristate "Micronas MSP34xx audio decoders"
 102         depends on VIDEO_V4L2 && I2C
 103         help
 104           Support for the Micronas MSP34xx series of audio decoders.
 105
 106           To compile this driver as a module, choose M here: the
 107           module will be called msp3400.
 108
 109 config VIDEO_CS3308
 110         tristate "Cirrus Logic CS3308 audio ADC"
 111         depends on VIDEO_V4L2 && I2C
 112         help
 113           Support for the Cirrus Logic CS3308 High Performance 8-Channel
 114           Analog Volume Control
 115
 116           To compile this driver as a module, choose M here: the
 117           module will be called cs3308.
 118
 119 config VIDEO_CS5345
 120         tristate "Cirrus Logic CS5345 audio ADC"
 121         depends on VIDEO_V4L2 && I2C
 122         help
 123           Support for the Cirrus Logic CS5345 24-bit, 192 kHz
 124           stereo A/D converter.
 125
 126           To compile this driver as a module, choose M here: the
 127           module will be called cs5345.
 128
 129 config VIDEO_CS53L32A
 130         tristate "Cirrus Logic CS53L32A audio ADC"
 131         depends on VIDEO_V4L2 && I2C
 132         help
 133           Support for the Cirrus Logic CS53L32A low voltage
 134           stereo A/D converter.
 135
 136           To compile this driver as a module, choose M here: the
 137           module will be called cs53l32a.
 138
 139 config VIDEO_TLV320AIC23B
 140         tristate "Texas Instruments TLV320AIC23B audio codec"
 141         depends on VIDEO_V4L2 && I2C
 142         help
 143           Support for the Texas Instruments TLV320AIC23B audio codec.
 144
 145           To compile this driver as a module, choose M here: the
 146           module will be called tlv320aic23b.
 147
 148 config VIDEO_UDA1342
 149         tristate "Philips UDA1342 audio codec"
 150         depends on VIDEO_V4L2 && I2C
 151         help
 152           Support for the Philips UDA1342 audio codec.
 153
 154           To compile this driver as a module, choose M here: the
 155           module will be called uda1342.
 156
 157 config VIDEO_WM8775
 158         tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
 159         depends on VIDEO_V4L2 && I2C
 160         help
 161           Support for the Wolfson Microelectronics WM8775 high
 162           performance stereo A/D Converter with a 4 channel input mixer.
 163
 164           To compile this driver as a module, choose M here: the
 165           module will be called wm8775.
 166
 167 config VIDEO_WM8739
 168         tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
 169         depends on VIDEO_V4L2 && I2C
 170         help
 171           Support for the Wolfson Microelectronics WM8739
 172           stereo A/D Converter.
 173
 174           To compile this driver as a module, choose M here: the
 175           module will be called wm8739.
 176
 177 config VIDEO_VP27SMPX
 178         tristate "Panasonic VP27's internal MPX"
 179         depends on VIDEO_V4L2 && I2C
 180         help
 181           Support for the internal MPX of the Panasonic VP27s tuner.
 182
 183           To compile this driver as a module, choose M here: the
 184           module will be called vp27smpx.
 185
 186 config VIDEO_SONY_BTF_MPX
 187         tristate "Sony BTF's internal MPX"
 188         depends on VIDEO_V4L2 && I2C
 189         help
 190           Support for the internal MPX of the Sony BTF-PG472Z tuner.
 191
 192           To compile this driver as a module, choose M here: the
 193           module will be called sony-btf-mpx.
 194 endmenu
 195
 196 menu "RDS decoders"
 197         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 198
 199 config VIDEO_SAA6588
 200         tristate "SAA6588 Radio Chip RDS decoder support"
 201         depends on VIDEO_V4L2 && I2C
 202
 203         help
 204           Support for this Radio Data System (RDS) decoder. This allows
 205           seeing radio station identification transmitted using this
 206           standard.
 207
 208           To compile this driver as a module, choose M here: the
 209           module will be called saa6588.
 210 endmenu
 211
 212 menu "Video decoders"
 213         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 214
 215 config VIDEO_ADV7180
 216         tristate "Analog Devices ADV7180 decoder"
 217         depends on GPIOLIB && VIDEO_V4L2 && I2C
 218         select MEDIA_CONTROLLER
 219         select VIDEO_V4L2_SUBDEV_API
 220         select V4L2_ASYNC
 221         help
 222           Support for the Analog Devices ADV7180 video decoder.
 223
 224           To compile this driver as a module, choose M here: the
 225           module will be called adv7180.
 226
 227 config VIDEO_ADV7183
 228         tristate "Analog Devices ADV7183 decoder"
 229         depends on VIDEO_V4L2 && I2C
 230         help
 231           V4l2 subdevice driver for the Analog Devices
 232           ADV7183 video decoder.
 233
 234           To compile this driver as a module, choose M here: the
 235           module will be called adv7183.
 236
 237 config VIDEO_ADV748X
 238         tristate "Analog Devices ADV748x decoder"
 239         depends on VIDEO_V4L2 && I2C
 240         depends on OF
 241         select MEDIA_CONTROLLER
 242         select VIDEO_V4L2_SUBDEV_API
 243         select REGMAP_I2C
 244         select V4L2_FWNODE
 245         help
 246           V4L2 subdevice driver for the Analog Devices
 247           ADV7481 and ADV7482 HDMI/Analog video decoders.
 248
 249           To compile this driver as a module, choose M here: the
 250           module will be called adv748x.
 251
 252 config VIDEO_ADV7604
 253         tristate "Analog Devices ADV7604 decoder"
 254         depends on VIDEO_V4L2 && I2C
 255         depends on GPIOLIB || COMPILE_TEST
 256         select MEDIA_CONTROLLER
 257         select VIDEO_V4L2_SUBDEV_API
 258         select REGMAP_I2C
 259         select HDMI
 260         select V4L2_FWNODE
 261         help
 262           Support for the Analog Devices ADV7604 video decoder.
 263
 264           This is a Analog Devices Component/Graphics Digitizer
 265           with 4:1 Multiplexed HDMI Receiver.
 266
 267           To compile this driver as a module, choose M here: the
 268           module will be called adv7604.
 269
 270 config VIDEO_ADV7604_CEC
 271         bool "Enable Analog Devices ADV7604 CEC support"
 272         depends on VIDEO_ADV7604
 273         select CEC_CORE
 274         help
 275           When selected the adv7604 will support the optional
 276           HDMI CEC feature.
 277
 278 config VIDEO_ADV7842
 279         tristate "Analog Devices ADV7842 decoder"
 280         depends on VIDEO_V4L2 && I2C
 281         select MEDIA_CONTROLLER
 282         select VIDEO_V4L2_SUBDEV_API
 283         select HDMI
 284         help
 285           Support for the Analog Devices ADV7842 video decoder.
 286
 287           This is a Analog Devices Component/Graphics/SD Digitizer
 288           with 2:1 Multiplexed HDMI Receiver.
 289
 290           To compile this driver as a module, choose M here: the
 291           module will be called adv7842.
 292
 293 config VIDEO_ADV7842_CEC
 294         bool "Enable Analog Devices ADV7842 CEC support"
 295         depends on VIDEO_ADV7842
 296         select CEC_CORE
 297         help
 298           When selected the adv7842 will support the optional
 299           HDMI CEC feature.
 300
 301 config VIDEO_BT819
 302         tristate "BT819A VideoStream decoder"
 303         depends on VIDEO_V4L2 && I2C
 304         help
 305           Support for BT819A video decoder.
 306
 307           To compile this driver as a module, choose M here: the
 308           module will be called bt819.
 309
 310 config VIDEO_BT856
 311         tristate "BT856 VideoStream decoder"
 312         depends on VIDEO_V4L2 && I2C
 313         help
 314           Support for BT856 video decoder.
 315
 316           To compile this driver as a module, choose M here: the
 317           module will be called bt856.
 318
 319 config VIDEO_BT866
 320         tristate "BT866 VideoStream decoder"
 321         depends on VIDEO_V4L2 && I2C
 322         help
 323           Support for BT866 video decoder.
 324
 325           To compile this driver as a module, choose M here: the
 326           module will be called bt866.
 327
 328 config VIDEO_KS0127
 329         tristate "KS0127 video decoder"
 330         depends on VIDEO_V4L2 && I2C
 331         help
 332           Support for KS0127 video decoder.
 333
 334           This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
 335           cards.
 336
 337           To compile this driver as a module, choose M here: the
 338           module will be called ks0127.
 339
 340 config VIDEO_ML86V7667
 341         tristate "OKI ML86V7667 video decoder"
 342         depends on VIDEO_V4L2 && I2C
 343         help
 344           Support for the OKI Semiconductor ML86V7667 video decoder.
 345
 346           To compile this driver as a module, choose M here: the
 347           module will be called ml86v7667.
 348
 349 config VIDEO_SAA7110
 350         tristate "Philips SAA7110 video decoder"
 351         depends on VIDEO_V4L2 && I2C
 352         help
 353           Support for the Philips SAA7110 video decoders.
 354
 355           To compile this driver as a module, choose M here: the
 356           module will be called saa7110.
 357
 358 config VIDEO_SAA711X
 359         tristate "Philips SAA7111/3/4/5 video decoders"
 360         depends on VIDEO_V4L2 && I2C
 361         help
 362           Support for the Philips SAA7111/3/4/5 video decoders.
 363
 364           To compile this driver as a module, choose M here: the
 365           module will be called saa7115.
 366
 367 config VIDEO_TC358743
 368         tristate "Toshiba TC358743 decoder"
 369         depends on VIDEO_V4L2 && I2C
 370         select MEDIA_CONTROLLER
 371         select VIDEO_V4L2_SUBDEV_API
 372         select HDMI
 373         select V4L2_FWNODE
 374         help
 375           Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
 376
 377           To compile this driver as a module, choose M here: the
 378           module will be called tc358743.
 379
 380 config VIDEO_TC358743_CEC
 381         bool "Enable Toshiba TC358743 CEC support"
 382         depends on VIDEO_TC358743
 383         select CEC_CORE
 384         help
 385           When selected the tc358743 will support the optional
 386           HDMI CEC feature.
 387
 388 config VIDEO_TVP514X
 389         tristate "Texas Instruments TVP514x video decoder"
 390         depends on VIDEO_V4L2 && I2C
 391         select V4L2_FWNODE
 392         help
 393           This is a Video4Linux2 sensor driver for the TI TVP5146/47
 394           decoder. It is currently working with the TI OMAP3 camera
 395           controller.
 396
 397           To compile this driver as a module, choose M here: the
 398           module will be called tvp514x.
 399
 400 config VIDEO_TVP5150
 401         tristate "Texas Instruments TVP5150 video decoder"
 402         depends on VIDEO_V4L2 && I2C
 403         select V4L2_FWNODE
 404         select REGMAP_I2C
 405         help
 406           Support for the Texas Instruments TVP5150 video decoder.
 407
 408           To compile this driver as a module, choose M here: the
 409           module will be called tvp5150.
 410
 411 config VIDEO_TVP7002
 412         tristate "Texas Instruments TVP7002 video decoder"
 413         depends on VIDEO_V4L2 && I2C
 414         select V4L2_FWNODE
 415         help
 416           Support for the Texas Instruments TVP7002 video decoder.
 417
 418           To compile this driver as a module, choose M here: the
 419           module will be called tvp7002.
 420
 421 config VIDEO_TW2804
 422         tristate "Techwell TW2804 multiple video decoder"
 423         depends on VIDEO_V4L2 && I2C
 424         help
 425           Support for the Techwell tw2804 multiple video decoder.
 426
 427           To compile this driver as a module, choose M here: the
 428           module will be called tw2804.
 429
 430 config VIDEO_TW9903
 431         tristate "Techwell TW9903 video decoder"
 432         depends on VIDEO_V4L2 && I2C
 433         help
 434           Support for the Techwell tw9903 multi-standard video decoder
 435           with high quality down scaler.
 436
 437           To compile this driver as a module, choose M here: the
 438           module will be called tw9903.
 439
 440 config VIDEO_TW9906
 441         tristate "Techwell TW9906 video decoder"
 442         depends on VIDEO_V4L2 && I2C
 443         help
 444           Support for the Techwell tw9906 enhanced multi-standard comb filter
 445           video decoder with YCbCr input support.
 446
 447           To compile this driver as a module, choose M here: the
 448           module will be called tw9906.
 449
 450 config VIDEO_TW9910
 451         tristate "Techwell TW9910 video decoder"
 452         depends on VIDEO_V4L2 && I2C
 453         help
 454           Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
 455
 456           To compile this driver as a module, choose M here: the
 457           module will be called tw9910.
 458
 459 config VIDEO_VPX3220
 460         tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
 461         depends on VIDEO_V4L2 && I2C
 462         help
 463           Support for VPX322x video decoders.
 464
 465           To compile this driver as a module, choose M here: the
 466           module will be called vpx3220.
 467
 468 config VIDEO_MAX9286
 469         tristate "Maxim MAX9286 GMSL deserializer support"
 470         depends on I2C && I2C_MUX
 471         depends on OF_GPIO
 472         select V4L2_FWNODE
 473         select VIDEO_V4L2_SUBDEV_API
 474         select MEDIA_CONTROLLER
 475         help
 476           This driver supports the Maxim MAX9286 GMSL deserializer.
 477
 478           To compile this driver as a module, choose M here: the
 479           module will be called max9286.
 480
 481 comment "Video and audio decoders"
 482
 483 config VIDEO_SAA717X
 484         tristate "Philips SAA7171/3/4 audio/video decoders"
 485         depends on VIDEO_V4L2 && I2C
 486         help
 487           Support for the Philips SAA7171/3/4 audio/video decoders.
 488
 489           To compile this driver as a module, choose M here: the
 490           module will be called saa717x.
 491
 492 source "drivers/media/i2c/cx25840/Kconfig"
 493
 494 endmenu
 495
 496 menu "Video encoders"
 497         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 498
 499 config VIDEO_SAA7127
 500         tristate "Philips SAA7127/9 digital video encoders"
 501         depends on VIDEO_V4L2 && I2C
 502         help
 503           Support for the Philips SAA7127/9 digital video encoders.
 504
 505           To compile this driver as a module, choose M here: the
 506           module will be called saa7127.
 507
 508 config VIDEO_SAA7185
 509         tristate "Philips SAA7185 video encoder"
 510         depends on VIDEO_V4L2 && I2C
 511         help
 512           Support for the Philips SAA7185 video encoder.
 513
 514           To compile this driver as a module, choose M here: the
 515           module will be called saa7185.
 516
 517 config VIDEO_ADV7170
 518         tristate "Analog Devices ADV7170 video encoder"
 519         depends on VIDEO_V4L2 && I2C
 520         help
 521           Support for the Analog Devices ADV7170 video encoder driver
 522
 523           To compile this driver as a module, choose M here: the
 524           module will be called adv7170.
 525
 526 config VIDEO_ADV7175
 527         tristate "Analog Devices ADV7175 video encoder"
 528         depends on VIDEO_V4L2 && I2C
 529         help
 530           Support for the Analog Devices ADV7175 video encoder driver
 531
 532           To compile this driver as a module, choose M here: the
 533           module will be called adv7175.
 534
 535 config VIDEO_ADV7343
 536         tristate "ADV7343 video encoder"
 537         depends on I2C
 538         select V4L2_ASYNC
 539         help
 540           Support for Analog Devices I2C bus based ADV7343 encoder.
 541
 542           To compile this driver as a module, choose M here: the
 543           module will be called adv7343.
 544
 545 config VIDEO_ADV7393
 546         tristate "ADV7393 video encoder"
 547         depends on I2C
 548         help
 549           Support for Analog Devices I2C bus based ADV7393 encoder.
 550
 551           To compile this driver as a module, choose M here: the
 552           module will be called adv7393.
 553
 554 config VIDEO_ADV7511
 555         tristate "Analog Devices ADV7511 encoder"
 556         depends on VIDEO_V4L2 && I2C
 557         depends on DRM_I2C_ADV7511=n || COMPILE_TEST
 558         select MEDIA_CONTROLLER
 559         select VIDEO_V4L2_SUBDEV_API
 560         select HDMI
 561         help
 562           Support for the Analog Devices ADV7511 video encoder.
 563
 564           This is a Analog Devices HDMI transmitter.
 565
 566           To compile this driver as a module, choose M here: the
 567           module will be called adv7511.
 568
 569 config VIDEO_ADV7511_CEC
 570         bool "Enable Analog Devices ADV7511 CEC support"
 571         depends on VIDEO_ADV7511
 572         select CEC_CORE
 573         help
 574           When selected the adv7511 will support the optional
 575           HDMI CEC feature.
 576
 577 config VIDEO_AD9389B
 578         tristate "Analog Devices AD9389B encoder"
 579         depends on VIDEO_V4L2 && I2C
 580         select MEDIA_CONTROLLER
 581         select VIDEO_V4L2_SUBDEV_API
 582
 583         help
 584           Support for the Analog Devices AD9389B video encoder.
 585
 586           This is a Analog Devices HDMI transmitter.
 587
 588           To compile this driver as a module, choose M here: the
 589           module will be called ad9389b.
 590
 591 config VIDEO_AK881X
 592         tristate "AK8813/AK8814 video encoders"
 593         depends on I2C
 594         help
 595           Video output driver for AKM AK8813 and AK8814 TV encoders
 596
 597 config VIDEO_THS8200
 598         tristate "Texas Instruments THS8200 video encoder"
 599         depends on VIDEO_V4L2 && I2C
 600         help
 601           Support for the Texas Instruments THS8200 video encoder.
 602
 603           To compile this driver as a module, choose M here: the
 604           module will be called ths8200.
 605 endmenu
 606
 607 menu "Video improvement chips"
 608         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 609
 610 config VIDEO_UPD64031A
 611         tristate "NEC Electronics uPD64031A Ghost Reduction"
 612         depends on VIDEO_V4L2 && I2C
 613         help
 614           Support for the NEC Electronics uPD64031A Ghost Reduction
 615           video chip. It is most often found in NTSC TV cards made for
 616           Japan and is used to reduce the 'ghosting' effect that can
 617           be present in analog TV broadcasts.
 618
 619           To compile this driver as a module, choose M here: the
 620           module will be called upd64031a.
 621
 622 config VIDEO_UPD64083
 623         tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
 624         depends on VIDEO_V4L2 && I2C
 625         help
 626           Support for the NEC Electronics uPD64083 3-Dimensional Y/C
 627           separation video chip. It is used to improve the quality of
 628           the colors of a composite signal.
 629
 630           To compile this driver as a module, choose M here: the
 631           module will be called upd64083.
 632 endmenu
 633
 634 menu "Audio/Video compression chips"
 635         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 636
 637 config VIDEO_SAA6752HS
 638         tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
 639         depends on VIDEO_V4L2 && I2C
 640         select CRC32
 641         help
 642           Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
 643           audio encoder with multiplexer.
 644
 645           To compile this driver as a module, choose M here: the
 646           module will be called saa6752hs.
 647
 648 endmenu
 649
 650 menu "SDR tuner chips"
 651         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 652
 653 config SDR_MAX2175
 654         tristate "Maxim 2175 RF to Bits tuner"
 655         depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
 656         select REGMAP_I2C
 657         select V4L2_ASYNC
 658         help
 659           Support for Maxim 2175 tuner. It is an advanced analog/digital
 660           radio receiver with RF-to-Bits front-end designed for SDR solutions.
 661
 662           To compile this driver as a module, choose M here; the
 663           module will be called max2175.
 664
 665
 666 endmenu
 667
 668 menu "Miscellaneous helper chips"
 669         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 670
 671 config VIDEO_THS7303
 672         tristate "THS7303/53 Video Amplifier"
 673         depends on VIDEO_V4L2 && I2C
 674         select V4L2_ASYNC
 675         help
 676           Support for TI THS7303/53 video amplifier
 677
 678           To compile this driver as a module, choose M here: the
 679           module will be called ths7303.
 680
 681 config VIDEO_M52790
 682         tristate "Mitsubishi M52790 A/V switch"
 683         depends on VIDEO_V4L2 && I2C
 684         help
 685          Support for the Mitsubishi M52790 A/V switch.
 686
 687          To compile this driver as a module, choose M here: the
 688          module will be called m52790.
 689
 690 config VIDEO_I2C
 691         tristate "I2C transport video support"
 692         depends on VIDEO_V4L2 && I2C
 693         select VIDEOBUF2_VMALLOC
 694         imply HWMON
 695         help
 696           Enable the I2C transport video support which supports the
 697           following:
 698            * Panasonic AMG88xx Grid-Eye Sensors
 699            * Melexis MLX90640 Thermal Cameras
 700
 701           To compile this driver as a module, choose M here: the
 702           module will be called video-i2c
 703
 704 config VIDEO_ST_MIPID02
 705         tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
 706         depends on I2C && VIDEO_V4L2
 707         select MEDIA_CONTROLLER
 708         select VIDEO_V4L2_SUBDEV_API
 709         select V4L2_FWNODE
 710         help
 711           Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
 712           It is used to allow usage of CSI-2 sensor with PARALLEL port
 713           controller.
 714
 715           To compile this driver as a module, choose M here: the
 716           module will be called st-mipid02.
 717 endmenu
 718
 719 #
 720 # V4L2 I2C drivers that are related with Camera support
 721 #
 722
 723 menu "Camera sensor devices"
 724         visible if MEDIA_CAMERA_SUPPORT
 725
 726 config VIDEO_APTINA_PLL
 727         tristate
 728
 729 config VIDEO_CCS_PLL
 730         tristate
 731
 732 config VIDEO_HI556
 733         tristate "Hynix Hi-556 sensor support"
 734         depends on I2C && VIDEO_V4L2
 735         select MEDIA_CONTROLLER
 736         select VIDEO_V4L2_SUBDEV_API
 737         select V4L2_FWNODE
 738         help
 739           This is a Video4Linux2 sensor driver for the Hynix
 740           Hi-556 camera.
 741
 742           To compile this driver as a module, choose M here: the
 743           module will be called hi556.
 744
 745 config VIDEO_IMX208
 746         tristate "Sony IMX208 sensor support"
 747         depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 748         depends on MEDIA_CAMERA_SUPPORT
 749         help
 750           This is a Video4Linux2 sensor driver for the Sony
 751           IMX208 camera.
 752
 753           To compile this driver as a module, choose M here: the
 754           module will be called imx208.
 755
 756 config VIDEO_IMX214
 757         tristate "Sony IMX214 sensor support"
 758         depends on GPIOLIB && I2C && VIDEO_V4L2
 759         select V4L2_FWNODE
 760         select MEDIA_CONTROLLER
 761         select VIDEO_V4L2_SUBDEV_API
 762         select REGMAP_I2C
 763         help
 764           This is a Video4Linux2 sensor driver for the Sony
 765           IMX214 camera.
 766
 767           To compile this driver as a module, choose M here: the
 768           module will be called imx214.
 769
 770 config VIDEO_IMX219
 771         tristate "Sony IMX219 sensor support"
 772         depends on I2C && VIDEO_V4L2
 773         select MEDIA_CONTROLLER
 774         select VIDEO_V4L2_SUBDEV_API
 775         select V4L2_FWNODE
 776         help
 777           This is a Video4Linux2 sensor driver for the Sony
 778           IMX219 camera.
 779
 780           To compile this driver as a module, choose M here: the
 781           module will be called imx219.
 782
 783 config VIDEO_IMX258
 784         tristate "Sony IMX258 sensor support"
 785         depends on I2C && VIDEO_V4L2
 786         select MEDIA_CONTROLLER
 787         select VIDEO_V4L2_SUBDEV_API
 788         help
 789           This is a Video4Linux2 sensor driver for the Sony
 790           IMX258 camera.
 791
 792           To compile this driver as a module, choose M here: the
 793           module will be called imx258.
 794
 795 config VIDEO_IMX274
 796         tristate "Sony IMX274 sensor support"
 797         depends on I2C && VIDEO_V4L2
 798         select MEDIA_CONTROLLER
 799         select VIDEO_V4L2_SUBDEV_API
 800         select REGMAP_I2C
 801         help
 802           This is a V4L2 sensor driver for the Sony IMX274
 803           CMOS image sensor.
 804
 805 config VIDEO_IMX290
 806         tristate "Sony IMX290 sensor support"
 807         depends on I2C && VIDEO_V4L2
 808         select MEDIA_CONTROLLER
 809         select VIDEO_V4L2_SUBDEV_API
 810         select REGMAP_I2C
 811         select V4L2_FWNODE
 812         help
 813           This is a Video4Linux2 sensor driver for the Sony
 814           IMX290 camera sensor.
 815
 816           To compile this driver as a module, choose M here: the
 817           module will be called imx290.
 818
 819 config VIDEO_IMX319
 820         tristate "Sony IMX319 sensor support"
 821         depends on I2C && VIDEO_V4L2
 822         select MEDIA_CONTROLLER
 823         select VIDEO_V4L2_SUBDEV_API
 824         help
 825           This is a Video4Linux2 sensor driver for the Sony
 826           IMX319 camera.
 827
 828           To compile this driver as a module, choose M here: the
 829           module will be called imx319.
 830
 831 config VIDEO_IMX334
 832         tristate "Sony IMX334 sensor support"
 833         depends on OF_GPIO
 834         depends on I2C && VIDEO_V4L2
 835         select VIDEO_V4L2_SUBDEV_API
 836         select MEDIA_CONTROLLER
 837         select V4L2_FWNODE
 838         help
 839           This is a Video4Linux2 sensor driver for the Sony
 840           IMX334 camera.
 841
 842           To compile this driver as a module, choose M here: the
 843           module will be called imx334.
 844
 845 config VIDEO_IMX335
 846         tristate "Sony IMX335 sensor support"
 847         depends on OF_GPIO
 848         depends on I2C && VIDEO_V4L2
 849         select VIDEO_V4L2_SUBDEV_API
 850         select MEDIA_CONTROLLER
 851         select V4L2_FWNODE
 852         help
 853           This is a Video4Linux2 sensor driver for the Sony
 854           IMX335 camera.
 855
 856           To compile this driver as a module, choose M here: the
 857           module will be called imx335.
 858
 859 config VIDEO_IMX355
 860         tristate "Sony IMX355 sensor support"
 861         depends on I2C && VIDEO_V4L2
 862         select MEDIA_CONTROLLER
 863         select VIDEO_V4L2_SUBDEV_API
 864         help
 865           This is a Video4Linux2 sensor driver for the Sony
 866           IMX355 camera.
 867
 868           To compile this driver as a module, choose M here: the
 869           module will be called imx355.
 870
 871 config VIDEO_IMX412
 872         tristate "Sony IMX412 sensor support"
 873         depends on OF_GPIO
 874         depends on I2C && VIDEO_V4L2
 875         select VIDEO_V4L2_SUBDEV_API
 876         select MEDIA_CONTROLLER
 877         select V4L2_FWNODE
 878         help
 879           This is a Video4Linux2 sensor driver for the Sony
 880           IMX412 camera.
 881
 882           To compile this driver as a module, choose M here: the
 883           module will be called imx412.
 884
 885 config VIDEO_OV02A10
 886         tristate "OmniVision OV02A10 sensor support"
 887         depends on VIDEO_V4L2 && I2C
 888         select MEDIA_CONTROLLER
 889         select VIDEO_V4L2_SUBDEV_API
 890         select V4L2_FWNODE
 891         help
 892           This is a Video4Linux2 sensor driver for the OmniVision
 893           OV02A10 camera.
 894
 895           To compile this driver as a module, choose M here: the
 896           module will be called ov02a10.
 897
 898 config VIDEO_OV2640
 899         tristate "OmniVision OV2640 sensor support"
 900         depends on VIDEO_V4L2 && I2C
 901         help
 902           This is a Video4Linux2 sensor driver for the OmniVision
 903           OV2640 camera.
 904
 905           To compile this driver as a module, choose M here: the
 906           module will be called ov2640.
 907
 908 config VIDEO_OV2659
 909         tristate "OmniVision OV2659 sensor support"
 910         depends on VIDEO_V4L2 && I2C && GPIOLIB
 911         select V4L2_FWNODE
 912         help
 913           This is a Video4Linux2 sensor driver for the OmniVision
 914           OV2659 camera.
 915
 916           To compile this driver as a module, choose M here: the
 917           module will be called ov2659.
 918
 919 config VIDEO_OV2680
 920         tristate "OmniVision OV2680 sensor support"
 921         depends on VIDEO_V4L2 && I2C
 922         select MEDIA_CONTROLLER
 923         select V4L2_FWNODE
 924         help
 925           This is a Video4Linux2 sensor driver for the OmniVision
 926           OV2680 camera.
 927
 928           To compile this driver as a module, choose M here: the
 929           module will be called ov2680.
 930
 931 config VIDEO_OV2685
 932         tristate "OmniVision OV2685 sensor support"
 933         depends on VIDEO_V4L2 && I2C
 934         select MEDIA_CONTROLLER
 935         select V4L2_FWNODE
 936         help
 937           This is a Video4Linux2 sensor driver for the OmniVision
 938           OV2685 camera.
 939
 940           To compile this driver as a module, choose M here: the
 941           module will be called ov2685.
 942
 943 config VIDEO_OV2740
 944         tristate "OmniVision OV2740 sensor support"
 945         depends on VIDEO_V4L2 && I2C
 946         depends on ACPI || COMPILE_TEST
 947         select MEDIA_CONTROLLER
 948         select VIDEO_V4L2_SUBDEV_API
 949         select V4L2_FWNODE
 950         select REGMAP_I2C
 951         help
 952           This is a Video4Linux2 sensor driver for the OmniVision
 953           OV2740 camera.
 954
 955           To compile this driver as a module, choose M here: the
 956           module will be called ov2740.
 957
 958 config VIDEO_OV5640
 959         tristate "OmniVision OV5640 sensor support"
 960         depends on OF
 961         depends on GPIOLIB && VIDEO_V4L2 && I2C
 962         select MEDIA_CONTROLLER
 963         select VIDEO_V4L2_SUBDEV_API
 964         select V4L2_FWNODE
 965         help
 966           This is a Video4Linux2 sensor driver for the Omnivision
 967           OV5640 camera sensor with a MIPI CSI-2 interface.
 968
 969 config VIDEO_OV5645
 970         tristate "OmniVision OV5645 sensor support"
 971         depends on OF
 972         depends on I2C && VIDEO_V4L2
 973         select MEDIA_CONTROLLER
 974         select VIDEO_V4L2_SUBDEV_API
 975         select V4L2_FWNODE
 976         help
 977           This is a Video4Linux2 sensor driver for the OmniVision
 978           OV5645 camera.
 979
 980           To compile this driver as a module, choose M here: the
 981           module will be called ov5645.
 982
 983 config VIDEO_OV5647
 984         tristate "OmniVision OV5647 sensor support"
 985         depends on I2C && VIDEO_V4L2
 986         select MEDIA_CONTROLLER
 987         select VIDEO_V4L2_SUBDEV_API
 988         select V4L2_FWNODE
 989         help
 990           This is a Video4Linux2 sensor driver for the OmniVision
 991           OV5647 camera.
 992
 993           To compile this driver as a module, choose M here: the
 994           module will be called ov5647.
 995
 996 config VIDEO_OV5648
 997         tristate "OmniVision OV5648 sensor support"
 998         depends on I2C && PM && VIDEO_V4L2
 999         select MEDIA_CONTROLLER
1000         select VIDEO_V4L2_SUBDEV_API
1001         select V4L2_FWNODE
1002         help
1003           This is a Video4Linux2 sensor driver for the OmniVision
1004           OV5648 camera.
1005
1006           To compile this driver as a module, choose M here: the
1007           module will be called ov5648.
1008
1009 config VIDEO_OV6650
1010         tristate "OmniVision OV6650 sensor support"
1011         depends on I2C && VIDEO_V4L2
1012         help
1013           This is a Video4Linux2 sensor driver for the OmniVision
1014           OV6650 camera.
1015
1016           To compile this driver as a module, choose M here: the
1017           module will be called ov6650.
1018
1019 config VIDEO_OV5670
1020         tristate "OmniVision OV5670 sensor support"
1021         depends on I2C && VIDEO_V4L2
1022         select MEDIA_CONTROLLER
1023         select VIDEO_V4L2_SUBDEV_API
1024         select V4L2_FWNODE
1025         help
1026           This is a Video4Linux2 sensor driver for the OmniVision
1027           OV5670 camera.
1028
1029           To compile this driver as a module, choose M here: the
1030           module will be called ov5670.
1031
1032 config VIDEO_OV5675
1033         tristate "OmniVision OV5675 sensor support"
1034         depends on I2C && VIDEO_V4L2
1035         select MEDIA_CONTROLLER
1036         select VIDEO_V4L2_SUBDEV_API
1037         select V4L2_FWNODE
1038         help
1039           This is a Video4Linux2 sensor driver for the OmniVision
1040           OV5675 camera.
1041
1042           To compile this driver as a module, choose M here: the
1043           module will be called ov5675.
1044
1045 config VIDEO_OV5695
1046         tristate "OmniVision OV5695 sensor support"
1047         depends on I2C && VIDEO_V4L2
1048         select V4L2_FWNODE
1049         help
1050           This is a Video4Linux2 sensor driver for the OmniVision
1051           OV5695 camera.
1052
1053           To compile this driver as a module, choose M here: the
1054           module will be called ov5695.
1055
1056 config VIDEO_OV7251
1057         tristate "OmniVision OV7251 sensor support"
1058         depends on I2C && VIDEO_V4L2
1059         select MEDIA_CONTROLLER
1060         select VIDEO_V4L2_SUBDEV_API
1061         select V4L2_FWNODE
1062         help
1063           This is a Video4Linux2 sensor driver for the OmniVision
1064           OV7251 camera.
1065
1066           To compile this driver as a module, choose M here: the
1067           module will be called ov7251.
1068
1069 config VIDEO_OV772X
1070         tristate "OmniVision OV772x sensor support"
1071         depends on I2C && VIDEO_V4L2
1072         select REGMAP_SCCB
1073         select V4L2_FWNODE
1074         help
1075           This is a Video4Linux2 sensor driver for the OmniVision
1076           OV772x camera.
1077
1078           To compile this driver as a module, choose M here: the
1079           module will be called ov772x.
1080
1081 config VIDEO_OV7640
1082         tristate "OmniVision OV7640 sensor support"
1083         depends on I2C && VIDEO_V4L2
1084         help
1085           This is a Video4Linux2 sensor driver for the OmniVision
1086           OV7640 camera.
1087
1088           To compile this driver as a module, choose M here: the
1089           module will be called ov7640.
1090
1091 config VIDEO_OV7670
1092         tristate "OmniVision OV7670 sensor support"
1093         depends on I2C && VIDEO_V4L2
1094         select V4L2_FWNODE
1095         help
1096           This is a Video4Linux2 sensor driver for the OmniVision
1097           OV7670 VGA camera.  It currently only works with the M88ALP01
1098           controller.
1099
1100 config VIDEO_OV7740
1101         tristate "OmniVision OV7740 sensor support"
1102         depends on I2C && VIDEO_V4L2
1103         select REGMAP_SCCB
1104         help
1105           This is a Video4Linux2 sensor driver for the OmniVision
1106           OV7740 VGA camera sensor.
1107
1108 config VIDEO_OV8856
1109         tristate "OmniVision OV8856 sensor support"
1110         depends on I2C && VIDEO_V4L2
1111         select MEDIA_CONTROLLER
1112         select VIDEO_V4L2_SUBDEV_API
1113         select V4L2_FWNODE
1114         help
1115           This is a Video4Linux2 sensor driver for the OmniVision
1116           OV8856 camera sensor.
1117
1118           To compile this driver as a module, choose M here: the
1119           module will be called ov8856.
1120
1121 config VIDEO_OV8865
1122         tristate "OmniVision OV8865 sensor support"
1123         depends on I2C && PM && VIDEO_V4L2
1124         select MEDIA_CONTROLLER
1125         select VIDEO_V4L2_SUBDEV_API
1126         select V4L2_FWNODE
1127         help
1128           This is a Video4Linux2 sensor driver for OmniVision
1129           OV8865 camera sensor.
1130
1131           To compile this driver as a module, choose M here: the
1132           module will be called ov8865.
1133
1134 config VIDEO_OV9282
1135         tristate "OmniVision OV9282 sensor support"
1136         depends on OF_GPIO
1137         depends on I2C && VIDEO_V4L2
1138         select VIDEO_V4L2_SUBDEV_API
1139         select MEDIA_CONTROLLER
1140         select V4L2_FWNODE
1141         help
1142           This is a Video4Linux2 sensor driver for the OmniVision
1143           OV9282 camera sensor.
1144
1145           To compile this driver as a module, choose M here: the
1146           module will be called ov9282.
1147
1148 config VIDEO_OV9640
1149         tristate "OmniVision OV9640 sensor support"
1150         depends on I2C && VIDEO_V4L2
1151         help
1152           This is a Video4Linux2 sensor driver for the OmniVision
1153           OV9640 camera sensor.
1154
1155 config VIDEO_OV9650
1156         tristate "OmniVision OV9650/OV9652 sensor support"
1157         depends on I2C && VIDEO_V4L2
1158         select MEDIA_CONTROLLER
1159         select VIDEO_V4L2_SUBDEV_API
1160         select REGMAP_SCCB
1161         help
1162           This is a V4L2 sensor driver for the Omnivision
1163           OV9650 and OV9652 camera sensors.
1164
1165 config VIDEO_OV9734
1166         tristate "OmniVision OV9734 sensor support"
1167         depends on VIDEO_V4L2 && I2C
1168         depends on ACPI || COMPILE_TEST
1169         select MEDIA_CONTROLLER
1170         select VIDEO_V4L2_SUBDEV_API
1171         select V4L2_FWNODE
1172         help
1173           This is a Video4Linux2 sensor driver for the OmniVision
1174           OV9734 camera.
1175
1176           To compile this driver as a module, choose M here: the
1177           module's name is ov9734.
1178
1179 config VIDEO_OV13858
1180         tristate "OmniVision OV13858 sensor support"
1181         depends on I2C && VIDEO_V4L2
1182         select MEDIA_CONTROLLER
1183         select VIDEO_V4L2_SUBDEV_API
1184         select V4L2_FWNODE
1185         help
1186           This is a Video4Linux2 sensor driver for the OmniVision
1187           OV13858 camera.
1188
1189 config VIDEO_VS6624
1190         tristate "ST VS6624 sensor support"
1191         depends on VIDEO_V4L2 && I2C
1192         help
1193           This is a Video4Linux2 sensor driver for the ST VS6624
1194           camera.
1195
1196           To compile this driver as a module, choose M here: the
1197           module will be called vs6624.
1198
1199 config VIDEO_MT9M001
1200         tristate "mt9m001 support"
1201         depends on I2C && VIDEO_V4L2
1202         select MEDIA_CONTROLLER
1203         select VIDEO_V4L2_SUBDEV_API
1204         help
1205           This driver supports MT9M001 cameras from Micron, monochrome
1206           and colour models.
1207
1208 config VIDEO_MT9M032
1209         tristate "MT9M032 camera sensor support"
1210         depends on I2C && VIDEO_V4L2
1211         select MEDIA_CONTROLLER
1212         select VIDEO_V4L2_SUBDEV_API
1213         select VIDEO_APTINA_PLL
1214         help
1215           This driver supports MT9M032 camera sensors from Aptina, monochrome
1216           models only.
1217
1218 config VIDEO_MT9M111
1219         tristate "mt9m111, mt9m112 and mt9m131 support"
1220         depends on I2C && VIDEO_V4L2
1221         select V4L2_FWNODE
1222         help
1223           This driver supports MT9M111, MT9M112 and MT9M131 cameras from
1224           Micron/Aptina
1225
1226 config VIDEO_MT9P031
1227         tristate "Aptina MT9P031 support"
1228         depends on I2C && VIDEO_V4L2
1229         select MEDIA_CONTROLLER
1230         select VIDEO_V4L2_SUBDEV_API
1231         select VIDEO_APTINA_PLL
1232         help
1233           This is a Video4Linux2 sensor driver for the Aptina
1234           (Micron) mt9p031 5 Mpixel camera.
1235
1236 config VIDEO_MT9T001
1237         tristate "Aptina MT9T001 support"
1238         depends on I2C && VIDEO_V4L2
1239         select MEDIA_CONTROLLER
1240         select VIDEO_V4L2_SUBDEV_API
1241         help
1242           This is a Video4Linux2 sensor driver for the Aptina
1243           (Micron) mt0t001 3 Mpixel camera.
1244
1245 config VIDEO_MT9T112
1246         tristate "Aptina MT9T111/MT9T112 support"
1247         depends on I2C && VIDEO_V4L2
1248         help
1249           This is a Video4Linux2 sensor driver for the Aptina
1250           (Micron) MT9T111 and MT9T112 3 Mpixel camera.
1251
1252           To compile this driver as a module, choose M here: the
1253           module will be called mt9t112.
1254
1255 config VIDEO_MT9V011
1256         tristate "Micron mt9v011 sensor support"
1257         depends on I2C && VIDEO_V4L2
1258         help
1259           This is a Video4Linux2 sensor driver for the Micron
1260           mt0v011 1.3 Mpixel camera.  It currently only works with the
1261           em28xx driver.
1262
1263 config VIDEO_MT9V032
1264         tristate "Micron MT9V032 sensor support"
1265         depends on I2C && VIDEO_V4L2
1266         select MEDIA_CONTROLLER
1267         select VIDEO_V4L2_SUBDEV_API
1268         select REGMAP_I2C
1269         select V4L2_FWNODE
1270         help
1271           This is a Video4Linux2 sensor driver for the Micron
1272           MT9V032 752x480 CMOS sensor.
1273
1274 config VIDEO_MT9V111
1275         tristate "Aptina MT9V111 sensor support"
1276         depends on I2C && VIDEO_V4L2
1277         help
1278           This is a Video4Linux2 sensor driver for the Aptina/Micron
1279           MT9V111 sensor.
1280
1281           To compile this driver as a module, choose M here: the
1282           module will be called mt9v111.
1283
1284 config VIDEO_SR030PC30
1285         tristate "Siliconfile SR030PC30 sensor support"
1286         depends on I2C && VIDEO_V4L2
1287         help
1288           This driver supports SR030PC30 VGA camera from Siliconfile
1289
1290 config VIDEO_NOON010PC30
1291         tristate "Siliconfile NOON010PC30 sensor support"
1292         depends on I2C && VIDEO_V4L2
1293         select MEDIA_CONTROLLER
1294         select VIDEO_V4L2_SUBDEV_API
1295         help
1296           This driver supports NOON010PC30 CIF camera from Siliconfile
1297
1298 source "drivers/media/i2c/m5mols/Kconfig"
1299
1300 config VIDEO_MAX9271_LIB
1301         tristate
1302
1303 config VIDEO_RDACM20
1304         tristate "IMI RDACM20 camera support"
1305         depends on I2C
1306         select V4L2_FWNODE
1307         select VIDEO_V4L2_SUBDEV_API
1308         select MEDIA_CONTROLLER
1309         select VIDEO_MAX9271_LIB
1310         help
1311           This driver supports the IMI RDACM20 GMSL camera, used in
1312           ADAS systems.
1313
1314           This camera should be used in conjunction with a GMSL
1315           deserialiser such as the MAX9286.
1316
1317 config VIDEO_RDACM21
1318         tristate "IMI RDACM21 camera support"
1319         depends on I2C
1320         select V4L2_FWNODE
1321         select VIDEO_V4L2_SUBDEV_API
1322         select MEDIA_CONTROLLER
1323         select VIDEO_MAX9271_LIB
1324         help
1325           This driver supports the IMI RDACM21 GMSL camera, used in
1326           ADAS systems.
1327
1328           This camera should be used in conjunction with a GMSL
1329           deserialiser such as the MAX9286.
1330
1331 config VIDEO_RJ54N1
1332         tristate "Sharp RJ54N1CB0C sensor support"
1333         depends on I2C && VIDEO_V4L2
1334         help
1335           This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
1336           sensor.
1337
1338           To compile this driver as a module, choose M here: the
1339           module will be called rj54n1.
1340
1341 config VIDEO_S5K6AA
1342         tristate "Samsung S5K6AAFX sensor support"
1343         depends on I2C && VIDEO_V4L2
1344         select MEDIA_CONTROLLER
1345         select VIDEO_V4L2_SUBDEV_API
1346         help
1347           This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
1348           camera sensor with an embedded SoC image signal processor.
1349
1350 config VIDEO_S5K6A3
1351         tristate "Samsung S5K6A3 sensor support"
1352         depends on I2C && VIDEO_V4L2
1353         select MEDIA_CONTROLLER
1354         select VIDEO_V4L2_SUBDEV_API
1355         help
1356           This is a V4L2 sensor driver for Samsung S5K6A3 raw
1357           camera sensor.
1358
1359 config VIDEO_S5K4ECGX
1360         tristate "Samsung S5K4ECGX sensor support"
1361         depends on I2C && VIDEO_V4L2
1362         select MEDIA_CONTROLLER
1363         select VIDEO_V4L2_SUBDEV_API
1364         select CRC32
1365         help
1366           This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
1367           camera sensor with an embedded SoC image signal processor.
1368
1369 config VIDEO_S5K5BAF
1370         tristate "Samsung S5K5BAF sensor support"
1371         depends on I2C && VIDEO_V4L2
1372         select MEDIA_CONTROLLER
1373         select VIDEO_V4L2_SUBDEV_API
1374         select V4L2_FWNODE
1375         help
1376           This is a V4L2 sensor driver for Samsung S5K5BAF 2M
1377           camera sensor with an embedded SoC image signal processor.
1378
1379 source "drivers/media/i2c/ccs/Kconfig"
1380 source "drivers/media/i2c/et8ek8/Kconfig"
1381
1382 config VIDEO_S5C73M3
1383         tristate "Samsung S5C73M3 sensor support"
1384         depends on I2C && SPI && VIDEO_V4L2
1385         select MEDIA_CONTROLLER
1386         select VIDEO_V4L2_SUBDEV_API
1387         select V4L2_FWNODE
1388         help
1389           This is a V4L2 sensor driver for Samsung S5C73M3
1390           8 Mpixel camera.
1391
1392 endmenu
1393
1394 menu "Lens drivers"
1395         visible if MEDIA_CAMERA_SUPPORT
1396
1397 config VIDEO_AD5820
1398         tristate "AD5820 lens voice coil support"
1399         depends on GPIOLIB && I2C && VIDEO_V4L2
1400         select MEDIA_CONTROLLER
1401         select V4L2_ASYNC
1402         help
1403           This is a driver for the AD5820 camera lens voice coil.
1404           It is used for example in Nokia N900 (RX-51).
1405
1406 config VIDEO_AK7375
1407         tristate "AK7375 lens voice coil support"
1408         depends on I2C && VIDEO_V4L2
1409         select MEDIA_CONTROLLER
1410         select VIDEO_V4L2_SUBDEV_API
1411         select V4L2_ASYNC
1412         help
1413           This is a driver for the AK7375 camera lens voice coil.
1414           AK7375 is a 12 bit DAC with 120mA output current sink
1415           capability. This is designed for linear control of
1416           voice coil motors, controlled via I2C serial interface.
1417
1418 config VIDEO_DW9714
1419         tristate "DW9714 lens voice coil support"
1420         depends on I2C && VIDEO_V4L2
1421         select MEDIA_CONTROLLER
1422         select VIDEO_V4L2_SUBDEV_API
1423         select V4L2_ASYNC
1424         help
1425           This is a driver for the DW9714 camera lens voice coil.
1426           DW9714 is a 10 bit DAC with 120mA output current sink
1427           capability. This is designed for linear control of
1428           voice coil motors, controlled via I2C serial interface.
1429
1430 config VIDEO_DW9768
1431         tristate "DW9768 lens voice coil support"
1432         depends on I2C && VIDEO_V4L2
1433         select MEDIA_CONTROLLER
1434         select VIDEO_V4L2_SUBDEV_API
1435         select V4L2_FWNODE
1436         help
1437           This is a driver for the DW9768 camera lens voice coil.
1438           DW9768 is a 10 bit DAC with 100mA output current sink
1439           capability. This is designed for linear control of
1440           voice coil motors, controlled via I2C serial interface.
1441
1442 config VIDEO_DW9807_VCM
1443         tristate "DW9807 lens voice coil support"
1444         depends on I2C && VIDEO_V4L2
1445         select MEDIA_CONTROLLER
1446         select VIDEO_V4L2_SUBDEV_API
1447         select V4L2_ASYNC
1448         help
1449           This is a driver for the DW9807 camera lens voice coil.
1450           DW9807 is a 10 bit DAC with 100mA output current sink
1451           capability. This is designed for linear control of
1452           voice coil motors, controlled via I2C serial interface.
1453
1454 endmenu
1455
1456 menu "Flash devices"
1457         visible if MEDIA_CAMERA_SUPPORT
1458
1459 config VIDEO_ADP1653
1460         tristate "ADP1653 flash support"
1461         depends on I2C && VIDEO_V4L2
1462         select MEDIA_CONTROLLER
1463         select V4L2_ASYNC
1464         help
1465           This is a driver for the ADP1653 flash controller. It is used for
1466           example in Nokia N900.
1467
1468 config VIDEO_LM3560
1469         tristate "LM3560 dual flash driver support"
1470         depends on I2C && VIDEO_V4L2
1471         select MEDIA_CONTROLLER
1472         select REGMAP_I2C
1473         select V4L2_ASYNC
1474         help
1475           This is a driver for the lm3560 dual flash controllers. It controls
1476           flash, torch LEDs.
1477
1478 config VIDEO_LM3646
1479         tristate "LM3646 dual flash driver support"
1480         depends on I2C && VIDEO_V4L2
1481         select MEDIA_CONTROLLER
1482         select REGMAP_I2C
1483         select V4L2_ASYNC
1484         help
1485           This is a driver for the lm3646 dual flash controllers. It controls
1486           flash, torch LEDs.
1487 endmenu
1488
1489 endif # VIDEO_V4L2