drivers/media/i2c/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # Multimedia Video device configuration
   4 #
   5
   6 if VIDEO_V4L2
   7
   8 comment "IR I2C driver auto-selected by 'Autoselect ancillary drivers'"
   9         depends on MEDIA_SUBDRV_AUTOSELECT && I2C && RC_CORE
  10
  11 config VIDEO_IR_I2C
  12         tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT || EXPERT
  13         depends on I2C && RC_CORE
  14         default y
  15         help
  16           Most boards have an IR chip directly connected via GPIO. However,
  17           some video boards have the IR connected via I2C bus.
  18
  19           If your board doesn't have an I2C IR chip, you may disable this
  20           option.
  21
  22           In doubt, say Y.
  23
  24 #
  25 # V4L2 I2C drivers that aren't related with Camera support
  26 #
  27
  28 comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'"
  29         depends on MEDIA_HIDE_ANCILLARY_SUBDRV
  30 #
  31 # Encoder / Decoder module configuration
  32 #
  33
  34 menu "Audio decoders, processors and mixers"
  35         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
  36
  37 config VIDEO_TVAUDIO
  38         tristate "Simple audio decoder chips"
  39         depends on VIDEO_V4L2 && I2C
  40         help
  41           Support for several audio decoder chips found on some bt8xx boards:
  42           Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
  43                    tea6320, tea6420, tda8425, ta8874z.
  44           Microchip: pic16c54 based design on ProVideo PV951 board.
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called tvaudio.
  48
  49 config VIDEO_TDA7432
  50         tristate "Philips TDA7432 audio processor"
  51         depends on VIDEO_V4L2 && I2C
  52         help
  53           Support for tda7432 audio decoder chip found on some bt8xx boards.
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called tda7432.
  57
  58 config VIDEO_TDA9840
  59         tristate "Philips TDA9840 audio processor"
  60         depends on I2C
  61         help
  62           Support for tda9840 audio decoder chip found on some Zoran boards.
  63
  64           To compile this driver as a module, choose M here: the
  65           module will be called tda9840.
  66
  67 config VIDEO_TDA1997X
  68         tristate "NXP TDA1997x HDMI receiver"
  69         depends on VIDEO_V4L2 && I2C
  70         depends on SND_SOC
  71         select HDMI
  72         select SND_PCM
  73         select V4L2_FWNODE
  74         select MEDIA_CONTROLLER
  75         select VIDEO_V4L2_SUBDEV_API
  76         help
  77           V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called tda1997x.
  81
  82 config VIDEO_TEA6415C
  83         tristate "Philips TEA6415C audio processor"
  84         depends on I2C
  85         help
  86           Support for tea6415c audio decoder chip found on some bt8xx boards.
  87
  88           To compile this driver as a module, choose M here: the
  89           module will be called tea6415c.
  90
  91 config VIDEO_TEA6420
  92         tristate "Philips TEA6420 audio processor"
  93         depends on I2C
  94         help
  95           Support for tea6420 audio decoder chip found on some bt8xx boards.
  96
  97           To compile this driver as a module, choose M here: the
  98           module will be called tea6420.
  99
 100 config VIDEO_MSP3400
 101         tristate "Micronas MSP34xx audio decoders"
 102         depends on VIDEO_V4L2 && I2C
 103         help
 104           Support for the Micronas MSP34xx series of audio decoders.
 105
 106           To compile this driver as a module, choose M here: the
 107           module will be called msp3400.
 108
 109 config VIDEO_CS3308
 110         tristate "Cirrus Logic CS3308 audio ADC"
 111         depends on VIDEO_V4L2 && I2C
 112         help
 113           Support for the Cirrus Logic CS3308 High Performance 8-Channel
 114           Analog Volume Control
 115
 116           To compile this driver as a module, choose M here: the
 117           module will be called cs3308.
 118
 119 config VIDEO_CS5345
 120         tristate "Cirrus Logic CS5345 audio ADC"
 121         depends on VIDEO_V4L2 && I2C
 122         help
 123           Support for the Cirrus Logic CS5345 24-bit, 192 kHz
 124           stereo A/D converter.
 125
 126           To compile this driver as a module, choose M here: the
 127           module will be called cs5345.
 128
 129 config VIDEO_CS53L32A
 130         tristate "Cirrus Logic CS53L32A audio ADC"
 131         depends on VIDEO_V4L2 && I2C
 132         help
 133           Support for the Cirrus Logic CS53L32A low voltage
 134           stereo A/D converter.
 135
 136           To compile this driver as a module, choose M here: the
 137           module will be called cs53l32a.
 138
 139 config VIDEO_TLV320AIC23B
 140         tristate "Texas Instruments TLV320AIC23B audio codec"
 141         depends on VIDEO_V4L2 && I2C
 142         help
 143           Support for the Texas Instruments TLV320AIC23B audio codec.
 144
 145           To compile this driver as a module, choose M here: the
 146           module will be called tlv320aic23b.
 147
 148 config VIDEO_UDA1342
 149         tristate "Philips UDA1342 audio codec"
 150         depends on VIDEO_V4L2 && I2C
 151         help
 152           Support for the Philips UDA1342 audio codec.
 153
 154           To compile this driver as a module, choose M here: the
 155           module will be called uda1342.
 156
 157 config VIDEO_WM8775
 158         tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
 159         depends on VIDEO_V4L2 && I2C
 160         help
 161           Support for the Wolfson Microelectronics WM8775 high
 162           performance stereo A/D Converter with a 4 channel input mixer.
 163
 164           To compile this driver as a module, choose M here: the
 165           module will be called wm8775.
 166
 167 config VIDEO_WM8739
 168         tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
 169         depends on VIDEO_V4L2 && I2C
 170         help
 171           Support for the Wolfson Microelectronics WM8739
 172           stereo A/D Converter.
 173
 174           To compile this driver as a module, choose M here: the
 175           module will be called wm8739.
 176
 177 config VIDEO_VP27SMPX
 178         tristate "Panasonic VP27's internal MPX"
 179         depends on VIDEO_V4L2 && I2C
 180         help
 181           Support for the internal MPX of the Panasonic VP27s tuner.
 182
 183           To compile this driver as a module, choose M here: the
 184           module will be called vp27smpx.
 185
 186 config VIDEO_SONY_BTF_MPX
 187         tristate "Sony BTF's internal MPX"
 188         depends on VIDEO_V4L2 && I2C
 189         help
 190           Support for the internal MPX of the Sony BTF-PG472Z tuner.
 191
 192           To compile this driver as a module, choose M here: the
 193           module will be called sony-btf-mpx.
 194 endmenu
 195
 196 menu "RDS decoders"
 197         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 198
 199 config VIDEO_SAA6588
 200         tristate "SAA6588 Radio Chip RDS decoder support"
 201         depends on VIDEO_V4L2 && I2C
 202
 203         help
 204           Support for this Radio Data System (RDS) decoder. This allows
 205           seeing radio station identification transmitted using this
 206           standard.
 207
 208           To compile this driver as a module, choose M here: the
 209           module will be called saa6588.
 210 endmenu
 211
 212 menu "Video decoders"
 213         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 214
 215 config VIDEO_ADV7180
 216         tristate "Analog Devices ADV7180 decoder"
 217         depends on GPIOLIB && VIDEO_V4L2 && I2C
 218         select MEDIA_CONTROLLER
 219         select VIDEO_V4L2_SUBDEV_API
 220         select V4L2_ASYNC
 221         help
 222           Support for the Analog Devices ADV7180 video decoder.
 223
 224           To compile this driver as a module, choose M here: the
 225           module will be called adv7180.
 226
 227 config VIDEO_ADV7183
 228         tristate "Analog Devices ADV7183 decoder"
 229         depends on VIDEO_V4L2 && I2C
 230         help
 231           V4l2 subdevice driver for the Analog Devices
 232           ADV7183 video decoder.
 233
 234           To compile this driver as a module, choose M here: the
 235           module will be called adv7183.
 236
 237 config VIDEO_ADV748X
 238         tristate "Analog Devices ADV748x decoder"
 239         depends on VIDEO_V4L2 && I2C
 240         depends on OF
 241         select MEDIA_CONTROLLER
 242         select VIDEO_V4L2_SUBDEV_API
 243         select REGMAP_I2C
 244         select V4L2_FWNODE
 245         help
 246           V4L2 subdevice driver for the Analog Devices
 247           ADV7481 and ADV7482 HDMI/Analog video decoders.
 248
 249           To compile this driver as a module, choose M here: the
 250           module will be called adv748x.
 251
 252 config VIDEO_ADV7604
 253         tristate "Analog Devices ADV7604 decoder"
 254         depends on VIDEO_V4L2 && I2C
 255         depends on GPIOLIB || COMPILE_TEST
 256         select MEDIA_CONTROLLER
 257         select VIDEO_V4L2_SUBDEV_API
 258         select REGMAP_I2C
 259         select HDMI
 260         select V4L2_FWNODE
 261         help
 262           Support for the Analog Devices ADV7604 video decoder.
 263
 264           This is a Analog Devices Component/Graphics Digitizer
 265           with 4:1 Multiplexed HDMI Receiver.
 266
 267           To compile this driver as a module, choose M here: the
 268           module will be called adv7604.
 269
 270 config VIDEO_ADV7604_CEC
 271         bool "Enable Analog Devices ADV7604 CEC support"
 272         depends on VIDEO_ADV7604
 273         select CEC_CORE
 274         help
 275           When selected the adv7604 will support the optional
 276           HDMI CEC feature.
 277
 278 config VIDEO_ADV7842
 279         tristate "Analog Devices ADV7842 decoder"
 280         depends on VIDEO_V4L2 && I2C
 281         select MEDIA_CONTROLLER
 282         select VIDEO_V4L2_SUBDEV_API
 283         select HDMI
 284         help
 285           Support for the Analog Devices ADV7842 video decoder.
 286
 287           This is a Analog Devices Component/Graphics/SD Digitizer
 288           with 2:1 Multiplexed HDMI Receiver.
 289
 290           To compile this driver as a module, choose M here: the
 291           module will be called adv7842.
 292
 293 config VIDEO_ADV7842_CEC
 294         bool "Enable Analog Devices ADV7842 CEC support"
 295         depends on VIDEO_ADV7842
 296         select CEC_CORE
 297         help
 298           When selected the adv7842 will support the optional
 299           HDMI CEC feature.
 300
 301 config VIDEO_BT819
 302         tristate "BT819A VideoStream decoder"
 303         depends on VIDEO_V4L2 && I2C
 304         help
 305           Support for BT819A video decoder.
 306
 307           To compile this driver as a module, choose M here: the
 308           module will be called bt819.
 309
 310 config VIDEO_BT856
 311         tristate "BT856 VideoStream decoder"
 312         depends on VIDEO_V4L2 && I2C
 313         help
 314           Support for BT856 video decoder.
 315
 316           To compile this driver as a module, choose M here: the
 317           module will be called bt856.
 318
 319 config VIDEO_BT866
 320         tristate "BT866 VideoStream decoder"
 321         depends on VIDEO_V4L2 && I2C
 322         help
 323           Support for BT866 video decoder.
 324
 325           To compile this driver as a module, choose M here: the
 326           module will be called bt866.
 327
 328 config VIDEO_KS0127
 329         tristate "KS0127 video decoder"
 330         depends on VIDEO_V4L2 && I2C
 331         help
 332           Support for KS0127 video decoder.
 333
 334           This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
 335           cards.
 336
 337           To compile this driver as a module, choose M here: the
 338           module will be called ks0127.
 339
 340 config VIDEO_ML86V7667
 341         tristate "OKI ML86V7667 video decoder"
 342         depends on VIDEO_V4L2 && I2C
 343         help
 344           Support for the OKI Semiconductor ML86V7667 video decoder.
 345
 346           To compile this driver as a module, choose M here: the
 347           module will be called ml86v7667.
 348
 349 config VIDEO_SAA7110
 350         tristate "Philips SAA7110 video decoder"
 351         depends on VIDEO_V4L2 && I2C
 352         help
 353           Support for the Philips SAA7110 video decoders.
 354
 355           To compile this driver as a module, choose M here: the
 356           module will be called saa7110.
 357
 358 config VIDEO_SAA711X
 359         tristate "Philips SAA7111/3/4/5 video decoders"
 360         depends on VIDEO_V4L2 && I2C
 361         help
 362           Support for the Philips SAA7111/3/4/5 video decoders.
 363
 364           To compile this driver as a module, choose M here: the
 365           module will be called saa7115.
 366
 367 config VIDEO_TC358743
 368         tristate "Toshiba TC358743 decoder"
 369         depends on VIDEO_V4L2 && I2C
 370         select MEDIA_CONTROLLER
 371         select VIDEO_V4L2_SUBDEV_API
 372         select HDMI
 373         select V4L2_FWNODE
 374         help
 375           Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
 376
 377           To compile this driver as a module, choose M here: the
 378           module will be called tc358743.
 379
 380 config VIDEO_TC358743_CEC
 381         bool "Enable Toshiba TC358743 CEC support"
 382         depends on VIDEO_TC358743
 383         select CEC_CORE
 384         help
 385           When selected the tc358743 will support the optional
 386           HDMI CEC feature.
 387
 388 config VIDEO_TVP514X
 389         tristate "Texas Instruments TVP514x video decoder"
 390         depends on VIDEO_V4L2 && I2C
 391         select V4L2_FWNODE
 392         help
 393           This is a Video4Linux2 sensor driver for the TI TVP5146/47
 394           decoder. It is currently working with the TI OMAP3 camera
 395           controller.
 396
 397           To compile this driver as a module, choose M here: the
 398           module will be called tvp514x.
 399
 400 config VIDEO_TVP5150
 401         tristate "Texas Instruments TVP5150 video decoder"
 402         depends on VIDEO_V4L2 && I2C
 403         select V4L2_FWNODE
 404         select REGMAP_I2C
 405         help
 406           Support for the Texas Instruments TVP5150 video decoder.
 407
 408           To compile this driver as a module, choose M here: the
 409           module will be called tvp5150.
 410
 411 config VIDEO_TVP7002
 412         tristate "Texas Instruments TVP7002 video decoder"
 413         depends on VIDEO_V4L2 && I2C
 414         select V4L2_FWNODE
 415         help
 416           Support for the Texas Instruments TVP7002 video decoder.
 417
 418           To compile this driver as a module, choose M here: the
 419           module will be called tvp7002.
 420
 421 config VIDEO_TW2804
 422         tristate "Techwell TW2804 multiple video decoder"
 423         depends on VIDEO_V4L2 && I2C
 424         help
 425           Support for the Techwell tw2804 multiple video decoder.
 426
 427           To compile this driver as a module, choose M here: the
 428           module will be called tw2804.
 429
 430 config VIDEO_TW9903
 431         tristate "Techwell TW9903 video decoder"
 432         depends on VIDEO_V4L2 && I2C
 433         help
 434           Support for the Techwell tw9903 multi-standard video decoder
 435           with high quality down scaler.
 436
 437           To compile this driver as a module, choose M here: the
 438           module will be called tw9903.
 439
 440 config VIDEO_TW9906
 441         tristate "Techwell TW9906 video decoder"
 442         depends on VIDEO_V4L2 && I2C
 443         help
 444           Support for the Techwell tw9906 enhanced multi-standard comb filter
 445           video decoder with YCbCr input support.
 446
 447           To compile this driver as a module, choose M here: the
 448           module will be called tw9906.
 449
 450 config VIDEO_TW9910
 451         tristate "Techwell TW9910 video decoder"
 452         depends on VIDEO_V4L2 && I2C
 453         help
 454           Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
 455
 456           To compile this driver as a module, choose M here: the
 457           module will be called tw9910.
 458
 459 config VIDEO_VPX3220
 460         tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
 461         depends on VIDEO_V4L2 && I2C
 462         help
 463           Support for VPX322x video decoders.
 464
 465           To compile this driver as a module, choose M here: the
 466           module will be called vpx3220.
 467
 468 config VIDEO_MAX9286
 469         tristate "Maxim MAX9286 GMSL deserializer support"
 470         depends on I2C && I2C_MUX
 471         depends on OF_GPIO
 472         select V4L2_FWNODE
 473         select VIDEO_V4L2_SUBDEV_API
 474         select MEDIA_CONTROLLER
 475         help
 476           This driver supports the Maxim MAX9286 GMSL deserializer.
 477
 478           To compile this driver as a module, choose M here: the
 479           module will be called max9286.
 480
 481 comment "Video and audio decoders"
 482
 483 config VIDEO_SAA717X
 484         tristate "Philips SAA7171/3/4 audio/video decoders"
 485         depends on VIDEO_V4L2 && I2C
 486         help
 487           Support for the Philips SAA7171/3/4 audio/video decoders.
 488
 489           To compile this driver as a module, choose M here: the
 490           module will be called saa717x.
 491
 492 source "drivers/media/i2c/cx25840/Kconfig"
 493
 494 endmenu
 495
 496 menu "Video encoders"
 497         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 498
 499 config VIDEO_SAA7127
 500         tristate "Philips SAA7127/9 digital video encoders"
 501         depends on VIDEO_V4L2 && I2C
 502         help
 503           Support for the Philips SAA7127/9 digital video encoders.
 504
 505           To compile this driver as a module, choose M here: the
 506           module will be called saa7127.
 507
 508 config VIDEO_SAA7185
 509         tristate "Philips SAA7185 video encoder"
 510         depends on VIDEO_V4L2 && I2C
 511         help
 512           Support for the Philips SAA7185 video encoder.
 513
 514           To compile this driver as a module, choose M here: the
 515           module will be called saa7185.
 516
 517 config VIDEO_ADV7170
 518         tristate "Analog Devices ADV7170 video encoder"
 519         depends on VIDEO_V4L2 && I2C
 520         help
 521           Support for the Analog Devices ADV7170 video encoder driver
 522
 523           To compile this driver as a module, choose M here: the
 524           module will be called adv7170.
 525
 526 config VIDEO_ADV7175
 527         tristate "Analog Devices ADV7175 video encoder"
 528         depends on VIDEO_V4L2 && I2C
 529         help
 530           Support for the Analog Devices ADV7175 video encoder driver
 531
 532           To compile this driver as a module, choose M here: the
 533           module will be called adv7175.
 534
 535 config VIDEO_ADV7343
 536         tristate "ADV7343 video encoder"
 537         depends on I2C
 538         select V4L2_ASYNC
 539         help
 540           Support for Analog Devices I2C bus based ADV7343 encoder.
 541
 542           To compile this driver as a module, choose M here: the
 543           module will be called adv7343.
 544
 545 config VIDEO_ADV7393
 546         tristate "ADV7393 video encoder"
 547         depends on I2C
 548         help
 549           Support for Analog Devices I2C bus based ADV7393 encoder.
 550
 551           To compile this driver as a module, choose M here: the
 552           module will be called adv7393.
 553
 554 config VIDEO_ADV7511
 555         tristate "Analog Devices ADV7511 encoder"
 556         depends on VIDEO_V4L2 && I2C
 557         depends on DRM_I2C_ADV7511=n || COMPILE_TEST
 558         select MEDIA_CONTROLLER
 559         select VIDEO_V4L2_SUBDEV_API
 560         select HDMI
 561         help
 562           Support for the Analog Devices ADV7511 video encoder.
 563
 564           This is a Analog Devices HDMI transmitter.
 565
 566           To compile this driver as a module, choose M here: the
 567           module will be called adv7511.
 568
 569 config VIDEO_ADV7511_CEC
 570         bool "Enable Analog Devices ADV7511 CEC support"
 571         depends on VIDEO_ADV7511
 572         select CEC_CORE
 573         help
 574           When selected the adv7511 will support the optional
 575           HDMI CEC feature.
 576
 577 config VIDEO_AD9389B
 578         tristate "Analog Devices AD9389B encoder"
 579         depends on VIDEO_V4L2 && I2C
 580         select MEDIA_CONTROLLER
 581         select VIDEO_V4L2_SUBDEV_API
 582
 583         help
 584           Support for the Analog Devices AD9389B video encoder.
 585
 586           This is a Analog Devices HDMI transmitter.
 587
 588           To compile this driver as a module, choose M here: the
 589           module will be called ad9389b.
 590
 591 config VIDEO_AK881X
 592         tristate "AK8813/AK8814 video encoders"
 593         depends on I2C
 594         help
 595           Video output driver for AKM AK8813 and AK8814 TV encoders
 596
 597 config VIDEO_THS8200
 598         tristate "Texas Instruments THS8200 video encoder"
 599         depends on VIDEO_V4L2 && I2C
 600         select V4L2_ASYNC
 601         help
 602           Support for the Texas Instruments THS8200 video encoder.
 603
 604           To compile this driver as a module, choose M here: the
 605           module will be called ths8200.
 606 endmenu
 607
 608 menu "Video improvement chips"
 609         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 610
 611 config VIDEO_UPD64031A
 612         tristate "NEC Electronics uPD64031A Ghost Reduction"
 613         depends on VIDEO_V4L2 && I2C
 614         help
 615           Support for the NEC Electronics uPD64031A Ghost Reduction
 616           video chip. It is most often found in NTSC TV cards made for
 617           Japan and is used to reduce the 'ghosting' effect that can
 618           be present in analog TV broadcasts.
 619
 620           To compile this driver as a module, choose M here: the
 621           module will be called upd64031a.
 622
 623 config VIDEO_UPD64083
 624         tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
 625         depends on VIDEO_V4L2 && I2C
 626         help
 627           Support for the NEC Electronics uPD64083 3-Dimensional Y/C
 628           separation video chip. It is used to improve the quality of
 629           the colors of a composite signal.
 630
 631           To compile this driver as a module, choose M here: the
 632           module will be called upd64083.
 633 endmenu
 634
 635 menu "Audio/Video compression chips"
 636         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 637
 638 config VIDEO_SAA6752HS
 639         tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
 640         depends on VIDEO_V4L2 && I2C
 641         select CRC32
 642         help
 643           Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
 644           audio encoder with multiplexer.
 645
 646           To compile this driver as a module, choose M here: the
 647           module will be called saa6752hs.
 648
 649 endmenu
 650
 651 menu "SDR tuner chips"
 652         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 653
 654 config SDR_MAX2175
 655         tristate "Maxim 2175 RF to Bits tuner"
 656         depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
 657         select REGMAP_I2C
 658         select V4L2_ASYNC
 659         help
 660           Support for Maxim 2175 tuner. It is an advanced analog/digital
 661           radio receiver with RF-to-Bits front-end designed for SDR solutions.
 662
 663           To compile this driver as a module, choose M here; the
 664           module will be called max2175.
 665
 666
 667 endmenu
 668
 669 menu "Miscellaneous helper chips"
 670         visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 671
 672 config VIDEO_THS7303
 673         tristate "THS7303/53 Video Amplifier"
 674         depends on VIDEO_V4L2 && I2C
 675         select V4L2_ASYNC
 676         help
 677           Support for TI THS7303/53 video amplifier
 678
 679           To compile this driver as a module, choose M here: the
 680           module will be called ths7303.
 681
 682 config VIDEO_M52790
 683         tristate "Mitsubishi M52790 A/V switch"
 684         depends on VIDEO_V4L2 && I2C
 685         help
 686          Support for the Mitsubishi M52790 A/V switch.
 687
 688          To compile this driver as a module, choose M here: the
 689          module will be called m52790.
 690
 691 config VIDEO_I2C
 692         tristate "I2C transport video support"
 693         depends on VIDEO_V4L2 && I2C
 694         select VIDEOBUF2_VMALLOC
 695         imply HWMON
 696         help
 697           Enable the I2C transport video support which supports the
 698           following:
 699            * Panasonic AMG88xx Grid-Eye Sensors
 700            * Melexis MLX90640 Thermal Cameras
 701
 702           To compile this driver as a module, choose M here: the
 703           module will be called video-i2c
 704
 705 config VIDEO_ST_MIPID02
 706         tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
 707         depends on I2C && VIDEO_V4L2
 708         select MEDIA_CONTROLLER
 709         select VIDEO_V4L2_SUBDEV_API
 710         select V4L2_FWNODE
 711         help
 712           Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
 713           It is used to allow usage of CSI-2 sensor with PARALLEL port
 714           controller.
 715
 716           To compile this driver as a module, choose M here: the
 717           module will be called st-mipid02.
 718 endmenu
 719
 720 #
 721 # V4L2 I2C drivers that are related with Camera support
 722 #
 723
 724 menu "Camera sensor devices"
 725         visible if MEDIA_CAMERA_SUPPORT
 726
 727 config VIDEO_APTINA_PLL
 728         tristate
 729
 730 config VIDEO_CCS_PLL
 731         tristate
 732
 733 config VIDEO_HI556
 734         tristate "Hynix Hi-556 sensor support"
 735         depends on I2C && VIDEO_V4L2
 736         select MEDIA_CONTROLLER
 737         select VIDEO_V4L2_SUBDEV_API
 738         select V4L2_FWNODE
 739         help
 740           This is a Video4Linux2 sensor driver for the Hynix
 741           Hi-556 camera.
 742
 743           To compile this driver as a module, choose M here: the
 744           module will be called hi556.
 745
 746 config VIDEO_IMX208
 747         tristate "Sony IMX208 sensor support"
 748         depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 749         depends on MEDIA_CAMERA_SUPPORT
 750         help
 751           This is a Video4Linux2 sensor driver for the Sony
 752           IMX208 camera.
 753
 754           To compile this driver as a module, choose M here: the
 755           module will be called imx208.
 756
 757 config VIDEO_IMX214
 758         tristate "Sony IMX214 sensor support"
 759         depends on GPIOLIB && I2C && VIDEO_V4L2
 760         select V4L2_FWNODE
 761         select MEDIA_CONTROLLER
 762         select VIDEO_V4L2_SUBDEV_API
 763         select REGMAP_I2C
 764         help
 765           This is a Video4Linux2 sensor driver for the Sony
 766           IMX214 camera.
 767
 768           To compile this driver as a module, choose M here: the
 769           module will be called imx214.
 770
 771 config VIDEO_IMX219
 772         tristate "Sony IMX219 sensor support"
 773         depends on I2C && VIDEO_V4L2
 774         select MEDIA_CONTROLLER
 775         select VIDEO_V4L2_SUBDEV_API
 776         select V4L2_FWNODE
 777         help
 778           This is a Video4Linux2 sensor driver for the Sony
 779           IMX219 camera.
 780
 781           To compile this driver as a module, choose M here: the
 782           module will be called imx219.
 783
 784 config VIDEO_IMX258
 785         tristate "Sony IMX258 sensor support"
 786         depends on I2C && VIDEO_V4L2
 787         select MEDIA_CONTROLLER
 788         select VIDEO_V4L2_SUBDEV_API
 789         help
 790           This is a Video4Linux2 sensor driver for the Sony
 791           IMX258 camera.
 792
 793           To compile this driver as a module, choose M here: the
 794           module will be called imx258.
 795
 796 config VIDEO_IMX274
 797         tristate "Sony IMX274 sensor support"
 798         depends on I2C && VIDEO_V4L2
 799         select MEDIA_CONTROLLER
 800         select VIDEO_V4L2_SUBDEV_API
 801         select REGMAP_I2C
 802         help
 803           This is a V4L2 sensor driver for the Sony IMX274
 804           CMOS image sensor.
 805
 806 config VIDEO_IMX290
 807         tristate "Sony IMX290 sensor support"
 808         depends on I2C && VIDEO_V4L2
 809         select MEDIA_CONTROLLER
 810         select VIDEO_V4L2_SUBDEV_API
 811         select REGMAP_I2C
 812         select V4L2_FWNODE
 813         help
 814           This is a Video4Linux2 sensor driver for the Sony
 815           IMX290 camera sensor.
 816
 817           To compile this driver as a module, choose M here: the
 818           module will be called imx290.
 819
 820 config VIDEO_IMX319
 821         tristate "Sony IMX319 sensor support"
 822         depends on I2C && VIDEO_V4L2
 823         select MEDIA_CONTROLLER
 824         select VIDEO_V4L2_SUBDEV_API
 825         help
 826           This is a Video4Linux2 sensor driver for the Sony
 827           IMX319 camera.
 828
 829           To compile this driver as a module, choose M here: the
 830           module will be called imx319.
 831
 832 config VIDEO_IMX334
 833         tristate "Sony IMX334 sensor support"
 834         depends on OF_GPIO
 835         depends on I2C && VIDEO_V4L2
 836         select VIDEO_V4L2_SUBDEV_API
 837         select MEDIA_CONTROLLER
 838         select V4L2_FWNODE
 839         help
 840           This is a Video4Linux2 sensor driver for the Sony
 841           IMX334 camera.
 842
 843           To compile this driver as a module, choose M here: the
 844           module will be called imx334.
 845
 846 config VIDEO_IMX335
 847         tristate "Sony IMX335 sensor support"
 848         depends on OF_GPIO
 849         depends on I2C && VIDEO_V4L2
 850         select VIDEO_V4L2_SUBDEV_API
 851         select MEDIA_CONTROLLER
 852         select V4L2_FWNODE
 853         help
 854           This is a Video4Linux2 sensor driver for the Sony
 855           IMX335 camera.
 856
 857           To compile this driver as a module, choose M here: the
 858           module will be called imx335.
 859
 860 config VIDEO_IMX355
 861         tristate "Sony IMX355 sensor support"
 862         depends on I2C && VIDEO_V4L2
 863         select MEDIA_CONTROLLER
 864         select VIDEO_V4L2_SUBDEV_API
 865         help
 866           This is a Video4Linux2 sensor driver for the Sony
 867           IMX355 camera.
 868
 869           To compile this driver as a module, choose M here: the
 870           module will be called imx355.
 871
 872 config VIDEO_IMX412
 873         tristate "Sony IMX412 sensor support"
 874         depends on OF_GPIO
 875         depends on I2C && VIDEO_V4L2
 876         select VIDEO_V4L2_SUBDEV_API
 877         select MEDIA_CONTROLLER
 878         select V4L2_FWNODE
 879         help
 880           This is a Video4Linux2 sensor driver for the Sony
 881           IMX412 camera.
 882
 883           To compile this driver as a module, choose M here: the
 884           module will be called imx412.
 885
 886 config VIDEO_OV02A10
 887         tristate "OmniVision OV02A10 sensor support"
 888         depends on VIDEO_V4L2 && I2C
 889         select MEDIA_CONTROLLER
 890         select VIDEO_V4L2_SUBDEV_API
 891         select V4L2_FWNODE
 892         help
 893           This is a Video4Linux2 sensor driver for the OmniVision
 894           OV02A10 camera.
 895
 896           To compile this driver as a module, choose M here: the
 897           module will be called ov02a10.
 898
 899 config VIDEO_OV2640
 900         tristate "OmniVision OV2640 sensor support"
 901         depends on VIDEO_V4L2 && I2C
 902         help
 903           This is a Video4Linux2 sensor driver for the OmniVision
 904           OV2640 camera.
 905
 906           To compile this driver as a module, choose M here: the
 907           module will be called ov2640.
 908
 909 config VIDEO_OV2659
 910         tristate "OmniVision OV2659 sensor support"
 911         depends on VIDEO_V4L2 && I2C && GPIOLIB
 912         select V4L2_FWNODE
 913         help
 914           This is a Video4Linux2 sensor driver for the OmniVision
 915           OV2659 camera.
 916
 917           To compile this driver as a module, choose M here: the
 918           module will be called ov2659.
 919
 920 config VIDEO_OV2680
 921         tristate "OmniVision OV2680 sensor support"
 922         depends on VIDEO_V4L2 && I2C
 923         select MEDIA_CONTROLLER
 924         select V4L2_FWNODE
 925         help
 926           This is a Video4Linux2 sensor driver for the OmniVision
 927           OV2680 camera.
 928
 929           To compile this driver as a module, choose M here: the
 930           module will be called ov2680.
 931
 932 config VIDEO_OV2685
 933         tristate "OmniVision OV2685 sensor support"
 934         depends on VIDEO_V4L2 && I2C
 935         select MEDIA_CONTROLLER
 936         select V4L2_FWNODE
 937         help
 938           This is a Video4Linux2 sensor driver for the OmniVision
 939           OV2685 camera.
 940
 941           To compile this driver as a module, choose M here: the
 942           module will be called ov2685.
 943
 944 config VIDEO_OV2740
 945         tristate "OmniVision OV2740 sensor support"
 946         depends on VIDEO_V4L2 && I2C
 947         depends on ACPI || COMPILE_TEST
 948         select MEDIA_CONTROLLER
 949         select VIDEO_V4L2_SUBDEV_API
 950         select V4L2_FWNODE
 951         select REGMAP_I2C
 952         help
 953           This is a Video4Linux2 sensor driver for the OmniVision
 954           OV2740 camera.
 955
 956           To compile this driver as a module, choose M here: the
 957           module will be called ov2740.
 958
 959 config VIDEO_OV5640
 960         tristate "OmniVision OV5640 sensor support"
 961         depends on OF
 962         depends on GPIOLIB && VIDEO_V4L2 && I2C
 963         select MEDIA_CONTROLLER
 964         select VIDEO_V4L2_SUBDEV_API
 965         select V4L2_FWNODE
 966         help
 967           This is a Video4Linux2 sensor driver for the Omnivision
 968           OV5640 camera sensor with a MIPI CSI-2 interface.
 969
 970 config VIDEO_OV5645
 971         tristate "OmniVision OV5645 sensor support"
 972         depends on OF
 973         depends on I2C && VIDEO_V4L2
 974         select MEDIA_CONTROLLER
 975         select VIDEO_V4L2_SUBDEV_API
 976         select V4L2_FWNODE
 977         help
 978           This is a Video4Linux2 sensor driver for the OmniVision
 979           OV5645 camera.
 980
 981           To compile this driver as a module, choose M here: the
 982           module will be called ov5645.
 983
 984 config VIDEO_OV5647
 985         tristate "OmniVision OV5647 sensor support"
 986         depends on I2C && VIDEO_V4L2
 987         select MEDIA_CONTROLLER
 988         select VIDEO_V4L2_SUBDEV_API
 989         select V4L2_FWNODE
 990         help
 991           This is a Video4Linux2 sensor driver for the OmniVision
 992           OV5647 camera.
 993
 994           To compile this driver as a module, choose M here: the
 995           module will be called ov5647.
 996
 997 config VIDEO_OV5648
 998         tristate "OmniVision OV5648 sensor support"
 999         depends on I2C && PM && VIDEO_V4L2
1000         select MEDIA_CONTROLLER
1001         select VIDEO_V4L2_SUBDEV_API
1002         select V4L2_FWNODE
1003         help
1004           This is a Video4Linux2 sensor driver for the OmniVision
1005           OV5648 camera.
1006
1007           To compile this driver as a module, choose M here: the
1008           module will be called ov5648.
1009
1010 config VIDEO_OV6650
1011         tristate "OmniVision OV6650 sensor support"
1012         depends on I2C && VIDEO_V4L2
1013         help
1014           This is a Video4Linux2 sensor driver for the OmniVision
1015           OV6650 camera.
1016
1017           To compile this driver as a module, choose M here: the
1018           module will be called ov6650.
1019
1020 config VIDEO_OV5670
1021         tristate "OmniVision OV5670 sensor support"
1022         depends on I2C && VIDEO_V4L2
1023         select MEDIA_CONTROLLER
1024         select VIDEO_V4L2_SUBDEV_API
1025         select V4L2_FWNODE
1026         help
1027           This is a Video4Linux2 sensor driver for the OmniVision
1028           OV5670 camera.
1029
1030           To compile this driver as a module, choose M here: the
1031           module will be called ov5670.
1032
1033 config VIDEO_OV5675
1034         tristate "OmniVision OV5675 sensor support"
1035         depends on I2C && VIDEO_V4L2
1036         select MEDIA_CONTROLLER
1037         select VIDEO_V4L2_SUBDEV_API
1038         select V4L2_FWNODE
1039         help
1040           This is a Video4Linux2 sensor driver for the OmniVision
1041           OV5675 camera.
1042
1043           To compile this driver as a module, choose M here: the
1044           module will be called ov5675.
1045
1046 config VIDEO_OV5695
1047         tristate "OmniVision OV5695 sensor support"
1048         depends on I2C && VIDEO_V4L2
1049         select V4L2_FWNODE
1050         help
1051           This is a Video4Linux2 sensor driver for the OmniVision
1052           OV5695 camera.
1053
1054           To compile this driver as a module, choose M here: the
1055           module will be called ov5695.
1056
1057 config VIDEO_OV7251
1058         tristate "OmniVision OV7251 sensor support"
1059         depends on I2C && VIDEO_V4L2
1060         select MEDIA_CONTROLLER
1061         select VIDEO_V4L2_SUBDEV_API
1062         select V4L2_FWNODE
1063         help
1064           This is a Video4Linux2 sensor driver for the OmniVision
1065           OV7251 camera.
1066
1067           To compile this driver as a module, choose M here: the
1068           module will be called ov7251.
1069
1070 config VIDEO_OV772X
1071         tristate "OmniVision OV772x sensor support"
1072         depends on I2C && VIDEO_V4L2
1073         select REGMAP_SCCB
1074         select V4L2_FWNODE
1075         help
1076           This is a Video4Linux2 sensor driver for the OmniVision
1077           OV772x camera.
1078
1079           To compile this driver as a module, choose M here: the
1080           module will be called ov772x.
1081
1082 config VIDEO_OV7640
1083         tristate "OmniVision OV7640 sensor support"
1084         depends on I2C && VIDEO_V4L2
1085         help
1086           This is a Video4Linux2 sensor driver for the OmniVision
1087           OV7640 camera.
1088
1089           To compile this driver as a module, choose M here: the
1090           module will be called ov7640.
1091
1092 config VIDEO_OV7670
1093         tristate "OmniVision OV7670 sensor support"
1094         depends on I2C && VIDEO_V4L2
1095         select V4L2_FWNODE
1096         help
1097           This is a Video4Linux2 sensor driver for the OmniVision
1098           OV7670 VGA camera.  It currently only works with the M88ALP01
1099           controller.
1100
1101 config VIDEO_OV7740
1102         tristate "OmniVision OV7740 sensor support"
1103         depends on I2C && VIDEO_V4L2
1104         select REGMAP_SCCB
1105         help
1106           This is a Video4Linux2 sensor driver for the OmniVision
1107           OV7740 VGA camera sensor.
1108
1109 config VIDEO_OV8856
1110         tristate "OmniVision OV8856 sensor support"
1111         depends on I2C && VIDEO_V4L2
1112         select MEDIA_CONTROLLER
1113         select VIDEO_V4L2_SUBDEV_API
1114         select V4L2_FWNODE
1115         help
1116           This is a Video4Linux2 sensor driver for the OmniVision
1117           OV8856 camera sensor.
1118
1119           To compile this driver as a module, choose M here: the
1120           module will be called ov8856.
1121
1122 config VIDEO_OV8865
1123         tristate "OmniVision OV8865 sensor support"
1124         depends on I2C && PM && VIDEO_V4L2
1125         select MEDIA_CONTROLLER
1126         select VIDEO_V4L2_SUBDEV_API
1127         select V4L2_FWNODE
1128         help
1129           This is a Video4Linux2 sensor driver for OmniVision
1130           OV8865 camera sensor.
1131
1132           To compile this driver as a module, choose M here: the
1133           module will be called ov8865.
1134
1135 config VIDEO_OV9282
1136         tristate "OmniVision OV9282 sensor support"
1137         depends on OF_GPIO
1138         depends on I2C && VIDEO_V4L2
1139         select VIDEO_V4L2_SUBDEV_API
1140         select MEDIA_CONTROLLER
1141         select V4L2_FWNODE
1142         help
1143           This is a Video4Linux2 sensor driver for the OmniVision
1144           OV9282 camera sensor.
1145
1146           To compile this driver as a module, choose M here: the
1147           module will be called ov9282.
1148
1149 config VIDEO_OV9640
1150         tristate "OmniVision OV9640 sensor support"
1151         depends on I2C && VIDEO_V4L2
1152         help
1153           This is a Video4Linux2 sensor driver for the OmniVision
1154           OV9640 camera sensor.
1155
1156 config VIDEO_OV9650
1157         tristate "OmniVision OV9650/OV9652 sensor support"
1158         depends on I2C && VIDEO_V4L2
1159         select MEDIA_CONTROLLER
1160         select VIDEO_V4L2_SUBDEV_API
1161         select REGMAP_SCCB
1162         help
1163           This is a V4L2 sensor driver for the Omnivision
1164           OV9650 and OV9652 camera sensors.
1165
1166 config VIDEO_OV9734
1167         tristate "OmniVision OV9734 sensor support"
1168         depends on VIDEO_V4L2 && I2C
1169         depends on ACPI || COMPILE_TEST
1170         select MEDIA_CONTROLLER
1171         select VIDEO_V4L2_SUBDEV_API
1172         select V4L2_FWNODE
1173         help
1174           This is a Video4Linux2 sensor driver for the OmniVision
1175           OV9734 camera.
1176
1177           To compile this driver as a module, choose M here: the
1178           module's name is ov9734.
1179
1180 config VIDEO_OV13858
1181         tristate "OmniVision OV13858 sensor support"
1182         depends on I2C && VIDEO_V4L2
1183         select MEDIA_CONTROLLER
1184         select VIDEO_V4L2_SUBDEV_API
1185         select V4L2_FWNODE
1186         help
1187           This is a Video4Linux2 sensor driver for the OmniVision
1188           OV13858 camera.
1189
1190 config VIDEO_VS6624
1191         tristate "ST VS6624 sensor support"
1192         depends on VIDEO_V4L2 && I2C
1193         help
1194           This is a Video4Linux2 sensor driver for the ST VS6624
1195           camera.
1196
1197           To compile this driver as a module, choose M here: the
1198           module will be called vs6624.
1199
1200 config VIDEO_MT9M001
1201         tristate "mt9m001 support"
1202         depends on I2C && VIDEO_V4L2
1203         select MEDIA_CONTROLLER
1204         select VIDEO_V4L2_SUBDEV_API
1205         help
1206           This driver supports MT9M001 cameras from Micron, monochrome
1207           and colour models.
1208
1209 config VIDEO_MT9M032
1210         tristate "MT9M032 camera sensor support"
1211         depends on I2C && VIDEO_V4L2
1212         select MEDIA_CONTROLLER
1213         select VIDEO_V4L2_SUBDEV_API
1214         select VIDEO_APTINA_PLL
1215         help
1216           This driver supports MT9M032 camera sensors from Aptina, monochrome
1217           models only.
1218
1219 config VIDEO_MT9M111
1220         tristate "mt9m111, mt9m112 and mt9m131 support"
1221         depends on I2C && VIDEO_V4L2
1222         select V4L2_FWNODE
1223         help
1224           This driver supports MT9M111, MT9M112 and MT9M131 cameras from
1225           Micron/Aptina
1226
1227 config VIDEO_MT9P031
1228         tristate "Aptina MT9P031 support"
1229         depends on I2C && VIDEO_V4L2
1230         select MEDIA_CONTROLLER
1231         select VIDEO_V4L2_SUBDEV_API
1232         select VIDEO_APTINA_PLL
1233         help
1234           This is a Video4Linux2 sensor driver for the Aptina
1235           (Micron) mt9p031 5 Mpixel camera.
1236
1237 config VIDEO_MT9T001
1238         tristate "Aptina MT9T001 support"
1239         depends on I2C && VIDEO_V4L2
1240         select MEDIA_CONTROLLER
1241         select VIDEO_V4L2_SUBDEV_API
1242         help
1243           This is a Video4Linux2 sensor driver for the Aptina
1244           (Micron) mt0t001 3 Mpixel camera.
1245
1246 config VIDEO_MT9T112
1247         tristate "Aptina MT9T111/MT9T112 support"
1248         depends on I2C && VIDEO_V4L2
1249         help
1250           This is a Video4Linux2 sensor driver for the Aptina
1251           (Micron) MT9T111 and MT9T112 3 Mpixel camera.
1252
1253           To compile this driver as a module, choose M here: the
1254           module will be called mt9t112.
1255
1256 config VIDEO_MT9V011
1257         tristate "Micron mt9v011 sensor support"
1258         depends on I2C && VIDEO_V4L2
1259         help
1260           This is a Video4Linux2 sensor driver for the Micron
1261           mt0v011 1.3 Mpixel camera.  It currently only works with the
1262           em28xx driver.
1263
1264 config VIDEO_MT9V032
1265         tristate "Micron MT9V032 sensor support"
1266         depends on I2C && VIDEO_V4L2
1267         select MEDIA_CONTROLLER
1268         select VIDEO_V4L2_SUBDEV_API
1269         select REGMAP_I2C
1270         select V4L2_FWNODE
1271         help
1272           This is a Video4Linux2 sensor driver for the Micron
1273           MT9V032 752x480 CMOS sensor.
1274
1275 config VIDEO_MT9V111
1276         tristate "Aptina MT9V111 sensor support"
1277         depends on I2C && VIDEO_V4L2
1278         help
1279           This is a Video4Linux2 sensor driver for the Aptina/Micron
1280           MT9V111 sensor.
1281
1282           To compile this driver as a module, choose M here: the
1283           module will be called mt9v111.
1284
1285 config VIDEO_SR030PC30
1286         tristate "Siliconfile SR030PC30 sensor support"
1287         depends on I2C && VIDEO_V4L2
1288         help
1289           This driver supports SR030PC30 VGA camera from Siliconfile
1290
1291 config VIDEO_NOON010PC30
1292         tristate "Siliconfile NOON010PC30 sensor support"
1293         depends on I2C && VIDEO_V4L2
1294         select MEDIA_CONTROLLER
1295         select VIDEO_V4L2_SUBDEV_API
1296         help
1297           This driver supports NOON010PC30 CIF camera from Siliconfile
1298
1299 source "drivers/media/i2c/m5mols/Kconfig"
1300
1301 config VIDEO_MAX9271_LIB
1302         tristate
1303
1304 config VIDEO_RDACM20
1305         tristate "IMI RDACM20 camera support"
1306         depends on I2C
1307         select V4L2_FWNODE
1308         select VIDEO_V4L2_SUBDEV_API
1309         select MEDIA_CONTROLLER
1310         select VIDEO_MAX9271_LIB
1311         help
1312           This driver supports the IMI RDACM20 GMSL camera, used in
1313           ADAS systems.
1314
1315           This camera should be used in conjunction with a GMSL
1316           deserialiser such as the MAX9286.
1317
1318 config VIDEO_RDACM21
1319         tristate "IMI RDACM21 camera support"
1320         depends on I2C
1321         select V4L2_FWNODE
1322         select VIDEO_V4L2_SUBDEV_API
1323         select MEDIA_CONTROLLER
1324         select VIDEO_MAX9271_LIB
1325         help
1326           This driver supports the IMI RDACM21 GMSL camera, used in
1327           ADAS systems.
1328
1329           This camera should be used in conjunction with a GMSL
1330           deserialiser such as the MAX9286.
1331
1332 config VIDEO_RJ54N1
1333         tristate "Sharp RJ54N1CB0C sensor support"
1334         depends on I2C && VIDEO_V4L2
1335         help
1336           This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
1337           sensor.
1338
1339           To compile this driver as a module, choose M here: the
1340           module will be called rj54n1.
1341
1342 config VIDEO_S5K6AA
1343         tristate "Samsung S5K6AAFX sensor support"
1344         depends on I2C && VIDEO_V4L2
1345         select MEDIA_CONTROLLER
1346         select VIDEO_V4L2_SUBDEV_API
1347         help
1348           This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
1349           camera sensor with an embedded SoC image signal processor.
1350
1351 config VIDEO_S5K6A3
1352         tristate "Samsung S5K6A3 sensor support"
1353         depends on I2C && VIDEO_V4L2
1354         select MEDIA_CONTROLLER
1355         select VIDEO_V4L2_SUBDEV_API
1356         help
1357           This is a V4L2 sensor driver for Samsung S5K6A3 raw
1358           camera sensor.
1359
1360 config VIDEO_S5K4ECGX
1361         tristate "Samsung S5K4ECGX sensor support"
1362         depends on I2C && VIDEO_V4L2
1363         select MEDIA_CONTROLLER
1364         select VIDEO_V4L2_SUBDEV_API
1365         select CRC32
1366         help
1367           This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
1368           camera sensor with an embedded SoC image signal processor.
1369
1370 config VIDEO_S5K5BAF
1371         tristate "Samsung S5K5BAF sensor support"
1372         depends on I2C && VIDEO_V4L2
1373         select MEDIA_CONTROLLER
1374         select VIDEO_V4L2_SUBDEV_API
1375         select V4L2_FWNODE
1376         help
1377           This is a V4L2 sensor driver for Samsung S5K5BAF 2M
1378           camera sensor with an embedded SoC image signal processor.
1379
1380 source "drivers/media/i2c/ccs/Kconfig"
1381 source "drivers/media/i2c/et8ek8/Kconfig"
1382
1383 config VIDEO_S5C73M3
1384         tristate "Samsung S5C73M3 sensor support"
1385         depends on I2C && SPI && VIDEO_V4L2
1386         select MEDIA_CONTROLLER
1387         select VIDEO_V4L2_SUBDEV_API
1388         select V4L2_FWNODE
1389         help
1390           This is a V4L2 sensor driver for Samsung S5C73M3
1391           8 Mpixel camera.
1392
1393 endmenu
1394
1395 menu "Lens drivers"
1396         visible if MEDIA_CAMERA_SUPPORT
1397
1398 config VIDEO_AD5820
1399         tristate "AD5820 lens voice coil support"
1400         depends on GPIOLIB && I2C && VIDEO_V4L2
1401         select MEDIA_CONTROLLER
1402         select V4L2_ASYNC
1403         help
1404           This is a driver for the AD5820 camera lens voice coil.
1405           It is used for example in Nokia N900 (RX-51).
1406
1407 config VIDEO_AK7375
1408         tristate "AK7375 lens voice coil support"
1409         depends on I2C && VIDEO_V4L2
1410         select MEDIA_CONTROLLER
1411         select VIDEO_V4L2_SUBDEV_API
1412         select V4L2_ASYNC
1413         help
1414           This is a driver for the AK7375 camera lens voice coil.
1415           AK7375 is a 12 bit DAC with 120mA output current sink
1416           capability. This is designed for linear control of
1417           voice coil motors, controlled via I2C serial interface.
1418
1419 config VIDEO_DW9714
1420         tristate "DW9714 lens voice coil support"
1421         depends on I2C && VIDEO_V4L2
1422         select MEDIA_CONTROLLER
1423         select VIDEO_V4L2_SUBDEV_API
1424         select V4L2_ASYNC
1425         help
1426           This is a driver for the DW9714 camera lens voice coil.
1427           DW9714 is a 10 bit DAC with 120mA output current sink
1428           capability. This is designed for linear control of
1429           voice coil motors, controlled via I2C serial interface.
1430
1431 config VIDEO_DW9768
1432         tristate "DW9768 lens voice coil support"
1433         depends on I2C && VIDEO_V4L2
1434         select MEDIA_CONTROLLER
1435         select VIDEO_V4L2_SUBDEV_API
1436         select V4L2_FWNODE
1437         help
1438           This is a driver for the DW9768 camera lens voice coil.
1439           DW9768 is a 10 bit DAC with 100mA output current sink
1440           capability. This is designed for linear control of
1441           voice coil motors, controlled via I2C serial interface.
1442
1443 config VIDEO_DW9807_VCM
1444         tristate "DW9807 lens voice coil support"
1445         depends on I2C && VIDEO_V4L2
1446         select MEDIA_CONTROLLER
1447         select VIDEO_V4L2_SUBDEV_API
1448         select V4L2_ASYNC
1449         help
1450           This is a driver for the DW9807 camera lens voice coil.
1451           DW9807 is a 10 bit DAC with 100mA output current sink
1452           capability. This is designed for linear control of
1453           voice coil motors, controlled via I2C serial interface.
1454
1455 endmenu
1456
1457 menu "Flash devices"
1458         visible if MEDIA_CAMERA_SUPPORT
1459
1460 config VIDEO_ADP1653
1461         tristate "ADP1653 flash support"
1462         depends on I2C && VIDEO_V4L2
1463         select MEDIA_CONTROLLER
1464         select V4L2_ASYNC
1465         help
1466           This is a driver for the ADP1653 flash controller. It is used for
1467           example in Nokia N900.
1468
1469 config VIDEO_LM3560
1470         tristate "LM3560 dual flash driver support"
1471         depends on I2C && VIDEO_V4L2
1472         select MEDIA_CONTROLLER
1473         select REGMAP_I2C
1474         select V4L2_ASYNC
1475         help
1476           This is a driver for the lm3560 dual flash controllers. It controls
1477           flash, torch LEDs.
1478
1479 config VIDEO_LM3646
1480         tristate "LM3646 dual flash driver support"
1481         depends on I2C && VIDEO_V4L2
1482         select MEDIA_CONTROLLER
1483         select REGMAP_I2C
1484         select V4L2_ASYNC
1485         help
1486           This is a driver for the lm3646 dual flash controllers. It controls
1487           flash, torch LEDs.
1488 endmenu
1489
1490 endif # VIDEO_V4L2