drivers/media/i2c/ks0127.c

   1 /*
   2  * Video Capture Driver (Video for Linux 1/2)
   3  * for the Matrox Marvel G200,G400 and Rainbow Runner-G series
   4  *
   5  * This module is an interface to the KS0127 video decoder chip.
   6  *
   7  * Copyright (C) 1999  Ryan Drake <stiletto@mediaone.net>
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License
  11  * as published by the Free Software Foundation; either version 2
  12  * of the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  22  *
  23  *****************************************************************************
  24  *
  25  * Modified and extended by
  26  *      Mike Bernson <mike@mlb.org>
  27  *      Gerard v.d. Horst
  28  *      Leon van Stuivenberg <l.vanstuivenberg@chello.nl>
  29  *      Gernot Ziegler <gz@lysator.liu.se>
  30  *
  31  * Version History:
  32  * V1.0 Ryan Drake         Initial version by Ryan Drake
  33  * V1.1 Gerard v.d. Horst  Added some debugoutput, reset the video-standard
  34  */
  35
  36 #include <linux/init.h>
  37 #include <linux/module.h>
  38 #include <linux/delay.h>
  39 #include <linux/errno.h>
  40 #include <linux/kernel.h>
  41 #include <linux/i2c.h>
  42 #include <linux/videodev2.h>
  43 #include <linux/slab.h>
  44 #include <media/v4l2-device.h>
  45 #include "ks0127.h"
  46
  47 MODULE_DESCRIPTION("KS0127 video decoder driver");
  48 MODULE_AUTHOR("Ryan Drake");
  49 MODULE_LICENSE("GPL");
  50
  51 /* Addresses */
  52 #define I2C_KS0127_ADDON   0xD8
  53 #define I2C_KS0127_ONBOARD 0xDA
  54
  55
  56 /* ks0127 control registers */
  57 #define KS_STAT     0x00
  58 #define KS_CMDA     0x01
  59 #define KS_CMDB     0x02
  60 #define KS_CMDC     0x03
  61 #define KS_CMDD     0x04
  62 #define KS_HAVB     0x05
  63 #define KS_HAVE     0x06
  64 #define KS_HS1B     0x07
  65 #define KS_HS1E     0x08
  66 #define KS_HS2B     0x09
  67 #define KS_HS2E     0x0a
  68 #define KS_AGC      0x0b
  69 #define KS_HXTRA    0x0c
  70 #define KS_CDEM     0x0d
  71 #define KS_PORTAB   0x0e
  72 #define KS_LUMA     0x0f
  73 #define KS_CON      0x10
  74 #define KS_BRT      0x11
  75 #define KS_CHROMA   0x12
  76 #define KS_CHROMB   0x13
  77 #define KS_DEMOD    0x14
  78 #define KS_SAT      0x15
  79 #define KS_HUE      0x16
  80 #define KS_VERTIA   0x17
  81 #define KS_VERTIB   0x18
  82 #define KS_VERTIC   0x19
  83 #define KS_HSCLL    0x1a
  84 #define KS_HSCLH    0x1b
  85 #define KS_VSCLL    0x1c
  86 #define KS_VSCLH    0x1d
  87 #define KS_OFMTA    0x1e
  88 #define KS_OFMTB    0x1f
  89 #define KS_VBICTL   0x20
  90 #define KS_CCDAT2   0x21
  91 #define KS_CCDAT1   0x22
  92 #define KS_VBIL30   0x23
  93 #define KS_VBIL74   0x24
  94 #define KS_VBIL118  0x25
  95 #define KS_VBIL1512 0x26
  96 #define KS_TTFRAM   0x27
  97 #define KS_TESTA    0x28
  98 #define KS_UVOFFH   0x29
  99 #define KS_UVOFFL   0x2a
 100 #define KS_UGAIN    0x2b
 101 #define KS_VGAIN    0x2c
 102 #define KS_VAVB     0x2d
 103 #define KS_VAVE     0x2e
 104 #define KS_CTRACK   0x2f
 105 #define KS_POLCTL   0x30
 106 #define KS_REFCOD   0x31
 107 #define KS_INVALY   0x32
 108 #define KS_INVALU   0x33
 109 #define KS_INVALV   0x34
 110 #define KS_UNUSEY   0x35
 111 #define KS_UNUSEU   0x36
 112 #define KS_UNUSEV   0x37
 113 #define KS_USRSAV   0x38
 114 #define KS_USREAV   0x39
 115 #define KS_SHS1A    0x3a
 116 #define KS_SHS1B    0x3b
 117 #define KS_SHS1C    0x3c
 118 #define KS_CMDE     0x3d
 119 #define KS_VSDEL    0x3e
 120 #define KS_CMDF     0x3f
 121 #define KS_GAMMA0   0x40
 122 #define KS_GAMMA1   0x41
 123 #define KS_GAMMA2   0x42
 124 #define KS_GAMMA3   0x43
 125 #define KS_GAMMA4   0x44
 126 #define KS_GAMMA5   0x45
 127 #define KS_GAMMA6   0x46
 128 #define KS_GAMMA7   0x47
 129 #define KS_GAMMA8   0x48
 130 #define KS_GAMMA9   0x49
 131 #define KS_GAMMA10  0x4a
 132 #define KS_GAMMA11  0x4b
 133 #define KS_GAMMA12  0x4c
 134 #define KS_GAMMA13  0x4d
 135 #define KS_GAMMA14  0x4e
 136 #define KS_GAMMA15  0x4f
 137 #define KS_GAMMA16  0x50
 138 #define KS_GAMMA17  0x51
 139 #define KS_GAMMA18  0x52
 140 #define KS_GAMMA19  0x53
 141 #define KS_GAMMA20  0x54
 142 #define KS_GAMMA21  0x55
 143 #define KS_GAMMA22  0x56
 144 #define KS_GAMMA23  0x57
 145 #define KS_GAMMA24  0x58
 146 #define KS_GAMMA25  0x59
 147 #define KS_GAMMA26  0x5a
 148 #define KS_GAMMA27  0x5b
 149 #define KS_GAMMA28  0x5c
 150 #define KS_GAMMA29  0x5d
 151 #define KS_GAMMA30  0x5e
 152 #define KS_GAMMA31  0x5f
 153 #define KS_GAMMAD0  0x60
 154 #define KS_GAMMAD1  0x61
 155 #define KS_GAMMAD2  0x62
 156 #define KS_GAMMAD3  0x63
 157 #define KS_GAMMAD4  0x64
 158 #define KS_GAMMAD5  0x65
 159 #define KS_GAMMAD6  0x66
 160 #define KS_GAMMAD7  0x67
 161 #define KS_GAMMAD8  0x68
 162 #define KS_GAMMAD9  0x69
 163 #define KS_GAMMAD10 0x6a
 164 #define KS_GAMMAD11 0x6b
 165 #define KS_GAMMAD12 0x6c
 166 #define KS_GAMMAD13 0x6d
 167 #define KS_GAMMAD14 0x6e
 168 #define KS_GAMMAD15 0x6f
 169 #define KS_GAMMAD16 0x70
 170 #define KS_GAMMAD17 0x71
 171 #define KS_GAMMAD18 0x72
 172 #define KS_GAMMAD19 0x73
 173 #define KS_GAMMAD20 0x74
 174 #define KS_GAMMAD21 0x75
 175 #define KS_GAMMAD22 0x76
 176 #define KS_GAMMAD23 0x77
 177 #define KS_GAMMAD24 0x78
 178 #define KS_GAMMAD25 0x79
 179 #define KS_GAMMAD26 0x7a
 180 #define KS_GAMMAD27 0x7b
 181 #define KS_GAMMAD28 0x7c
 182 #define KS_GAMMAD29 0x7d
 183 #define KS_GAMMAD30 0x7e
 184 #define KS_GAMMAD31 0x7f
 185
 186
 187 /****************************************************************************
 188 * mga_dev : represents one ks0127 chip.
 189 ****************************************************************************/
 190
 191 struct adjust {
 192         int     contrast;
 193         int     bright;
 194         int     hue;
 195         int     ugain;
 196         int     vgain;
 197 };
 198
 199 struct ks0127 {
 200         struct v4l2_subdev sd;
 201         v4l2_std_id     norm;
 202         u8              regs[256];
 203 };
 204
 205 static inline struct ks0127 *to_ks0127(struct v4l2_subdev *sd)
 206 {
 207         return container_of(sd, struct ks0127, sd);
 208 }
 209
 210
 211 static int debug; /* insmod parameter */
 212
 213 module_param(debug, int, 0);
 214 MODULE_PARM_DESC(debug, "Debug output");
 215
 216 static u8 reg_defaults[64];
 217
 218 static void init_reg_defaults(void)
 219 {
 220         static int initialized;
 221         u8 *table = reg_defaults;
 222
 223         if (initialized)
 224                 return;
 225         initialized = 1;
 226
 227         table[KS_CMDA]     = 0x2c;  /* VSE=0, CCIR 601, autodetect standard */
 228         table[KS_CMDB]     = 0x12;  /* VALIGN=0, AGC control and input */
 229         table[KS_CMDC]     = 0x00;  /* Test options */
 230         /* clock & input select, write 1 to PORTA */
 231         table[KS_CMDD]     = 0x01;
 232         table[KS_HAVB]     = 0x00;  /* HAV Start Control */
 233         table[KS_HAVE]     = 0x00;  /* HAV End Control */
 234         table[KS_HS1B]     = 0x10;  /* HS1 Start Control */
 235         table[KS_HS1E]     = 0x00;  /* HS1 End Control */
 236         table[KS_HS2B]     = 0x00;  /* HS2 Start Control */
 237         table[KS_HS2E]     = 0x00;  /* HS2 End Control */
 238         table[KS_AGC]      = 0x53;  /* Manual setting for AGC */
 239         table[KS_HXTRA]    = 0x00;  /* Extra Bits for HAV and HS1/2 */
 240         table[KS_CDEM]     = 0x00;  /* Chroma Demodulation Control */
 241         table[KS_PORTAB]   = 0x0f;  /* port B is input, port A output GPPORT */
 242         table[KS_LUMA]     = 0x01;  /* Luma control */
 243         table[KS_CON]      = 0x00;  /* Contrast Control */
 244         table[KS_BRT]      = 0x00;  /* Brightness Control */
 245         table[KS_CHROMA]   = 0x2a;  /* Chroma control A */
 246         table[KS_CHROMB]   = 0x90;  /* Chroma control B */
 247         table[KS_DEMOD]    = 0x00;  /* Chroma Demodulation Control & Status */
 248         table[KS_SAT]      = 0x00;  /* Color Saturation Control*/
 249         table[KS_HUE]      = 0x00;  /* Hue Control */
 250         table[KS_VERTIA]   = 0x00;  /* Vertical Processing Control A */
 251         /* Vertical Processing Control B, luma 1 line delayed */
 252         table[KS_VERTIB]   = 0x12;
 253         table[KS_VERTIC]   = 0x0b;  /* Vertical Processing Control C */
 254         table[KS_HSCLL]    = 0x00;  /* Horizontal Scaling Ratio Low */
 255         table[KS_HSCLH]    = 0x00;  /* Horizontal Scaling Ratio High */
 256         table[KS_VSCLL]    = 0x00;  /* Vertical Scaling Ratio Low */
 257         table[KS_VSCLH]    = 0x00;  /* Vertical Scaling Ratio High */
 258         /* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */
 259         table[KS_OFMTA]    = 0x30;
 260         table[KS_OFMTB]    = 0x00;  /* Output Control B */
 261         /* VBI Decoder Control; 4bit fmt: avoid Y overflow */
 262         table[KS_VBICTL]   = 0x5d;
 263         table[KS_CCDAT2]   = 0x00;  /* Read Only register */
 264         table[KS_CCDAT1]   = 0x00;  /* Read Only register */
 265         table[KS_VBIL30]   = 0xa8;  /* VBI data decoding options */
 266         table[KS_VBIL74]   = 0xaa;  /* VBI data decoding options */
 267         table[KS_VBIL118]  = 0x2a;  /* VBI data decoding options */
 268         table[KS_VBIL1512] = 0x00;  /* VBI data decoding options */
 269         table[KS_TTFRAM]   = 0x00;  /* Teletext frame alignment pattern */
 270         table[KS_TESTA]    = 0x00;  /* test register, shouldn't be written */
 271         table[KS_UVOFFH]   = 0x00;  /* UV Offset Adjustment High */
 272         table[KS_UVOFFL]   = 0x00;  /* UV Offset Adjustment Low */
 273         table[KS_UGAIN]    = 0x00;  /* U Component Gain Adjustment */
 274         table[KS_VGAIN]    = 0x00;  /* V Component Gain Adjustment */
 275         table[KS_VAVB]     = 0x07;  /* VAV Begin */
 276         table[KS_VAVE]     = 0x00;  /* VAV End */
 277         table[KS_CTRACK]   = 0x00;  /* Chroma Tracking Control */
 278         table[KS_POLCTL]   = 0x41;  /* Timing Signal Polarity Control */
 279         table[KS_REFCOD]   = 0x80;  /* Reference Code Insertion Control */
 280         table[KS_INVALY]   = 0x10;  /* Invalid Y Code */
 281         table[KS_INVALU]   = 0x80;  /* Invalid U Code */
 282         table[KS_INVALV]   = 0x80;  /* Invalid V Code */
 283         table[KS_UNUSEY]   = 0x10;  /* Unused Y Code */
 284         table[KS_UNUSEU]   = 0x80;  /* Unused U Code */
 285         table[KS_UNUSEV]   = 0x80;  /* Unused V Code */
 286         table[KS_USRSAV]   = 0x00;  /* reserved */
 287         table[KS_USREAV]   = 0x00;  /* reserved */
 288         table[KS_SHS1A]    = 0x00;  /* User Defined SHS1 A */
 289         /* User Defined SHS1 B, ALT656=1 on 0127B */
 290         table[KS_SHS1B]    = 0x80;
 291         table[KS_SHS1C]    = 0x00;  /* User Defined SHS1 C */
 292         table[KS_CMDE]     = 0x00;  /* Command Register E */
 293         table[KS_VSDEL]    = 0x00;  /* VS Delay Control */
 294         /* Command Register F, update -immediately- */
 295         /* (there might come no vsync)*/
 296         table[KS_CMDF]     = 0x02;
 297 }
 298
 299
 300 /* We need to manually read because of a bug in the KS0127 chip.
 301  *
 302  * An explanation from kayork@mail.utexas.edu:
 303  *
 304  * During I2C reads, the KS0127 only samples for a stop condition
 305  * during the place where the acknowledge bit should be. Any standard
 306  * I2C implementation (correctly) throws in another clock transition
 307  * at the 9th bit, and the KS0127 will not recognize the stop condition
 308  * and will continue to clock out data.
 309  *
 310  * So we have to do the read ourself.  Big deal.
 311  *         workaround in i2c-algo-bit
 312  */
 313
 314
 315 static u8 ks0127_read(struct v4l2_subdev *sd, u8 reg)
 316 {
 317         struct i2c_client *client = v4l2_get_subdevdata(sd);
 318         char val = 0;
 319         struct i2c_msg msgs[] = {
 320                 {
 321                         .addr = client->addr,
 322                         .len = sizeof(reg),
 323                         .buf = &reg
 324                 },
 325                 {
 326                         .addr = client->addr,
 327                         .flags = I2C_M_RD | I2C_M_NO_RD_ACK,
 328                         .len = sizeof(val),
 329                         .buf = &val
 330                 }
 331         };
 332         int ret;
 333
 334         ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 335         if (ret != ARRAY_SIZE(msgs))
 336                 v4l2_dbg(1, debug, sd, "read error\n");
 337
 338         return val;
 339 }
 340
 341
 342 static void ks0127_write(struct v4l2_subdev *sd, u8 reg, u8 val)
 343 {
 344         struct i2c_client *client = v4l2_get_subdevdata(sd);
 345         struct ks0127 *ks = to_ks0127(sd);
 346         char msg[] = { reg, val };
 347
 348         if (i2c_master_send(client, msg, sizeof(msg)) != sizeof(msg))
 349                 v4l2_dbg(1, debug, sd, "write error\n");
 350
 351         ks->regs[reg] = val;
 352 }
 353
 354
 355 /* generic bit-twiddling */
 356 static void ks0127_and_or(struct v4l2_subdev *sd, u8 reg, u8 and_v, u8 or_v)
 357 {
 358         struct ks0127 *ks = to_ks0127(sd);
 359
 360         u8 val = ks->regs[reg];
 361         val = (val & and_v) | or_v;
 362         ks0127_write(sd, reg, val);
 363 }
 364
 365
 366
 367 /****************************************************************************
 368 * ks0127 private api
 369 ****************************************************************************/
 370 static void ks0127_init(struct v4l2_subdev *sd)
 371 {
 372         u8 *table = reg_defaults;
 373         int i;
 374
 375         v4l2_dbg(1, debug, sd, "reset\n");
 376         msleep(1);
 377
 378         /* initialize all registers to known values */
 379         /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */
 380
 381         for (i = 1; i < 33; i++)
 382                 ks0127_write(sd, i, table[i]);
 383
 384         for (i = 35; i < 40; i++)
 385                 ks0127_write(sd, i, table[i]);
 386
 387         for (i = 41; i < 56; i++)
 388                 ks0127_write(sd, i, table[i]);
 389
 390         for (i = 58; i < 64; i++)
 391                 ks0127_write(sd, i, table[i]);
 392
 393
 394         if ((ks0127_read(sd, KS_STAT) & 0x80) == 0) {
 395                 v4l2_dbg(1, debug, sd, "ks0122s found\n");
 396                 return;
 397         }
 398
 399         switch (ks0127_read(sd, KS_CMDE) & 0x0f) {
 400         case 0:
 401                 v4l2_dbg(1, debug, sd, "ks0127 found\n");
 402                 break;
 403
 404         case 9:
 405                 v4l2_dbg(1, debug, sd, "ks0127B Revision A found\n");
 406                 break;
 407
 408         default:
 409                 v4l2_dbg(1, debug, sd, "unknown revision\n");
 410                 break;
 411         }
 412 }
 413
 414 static int ks0127_s_routing(struct v4l2_subdev *sd,
 415                             u32 input, u32 output, u32 config)
 416 {
 417         struct ks0127 *ks = to_ks0127(sd);
 418
 419         switch (input) {
 420         case KS_INPUT_COMPOSITE_1:
 421         case KS_INPUT_COMPOSITE_2:
 422         case KS_INPUT_COMPOSITE_3:
 423         case KS_INPUT_COMPOSITE_4:
 424         case KS_INPUT_COMPOSITE_5:
 425         case KS_INPUT_COMPOSITE_6:
 426                 v4l2_dbg(1, debug, sd,
 427                         "s_routing %d: Composite\n", input);
 428                 /* autodetect 50/60 Hz */
 429                 ks0127_and_or(sd, KS_CMDA,   0xfc, 0x00);
 430                 /* VSE=0 */
 431                 ks0127_and_or(sd, KS_CMDA,   ~0x40, 0x00);
 432                 /* set input line */
 433                 ks0127_and_or(sd, KS_CMDB,   0xb0, input);
 434                 /* non-freerunning mode */
 435                 ks0127_and_or(sd, KS_CMDC,   0x70, 0x0a);
 436                 /* analog input */
 437                 ks0127_and_or(sd, KS_CMDD,   0x03, 0x00);
 438                 /* enable chroma demodulation */
 439                 ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00);
 440                 /* chroma trap, HYBWR=1 */
 441                 ks0127_and_or(sd, KS_LUMA,   0x00,
 442                                (reg_defaults[KS_LUMA])|0x0c);
 443                 /* scaler fullbw, luma comb off */
 444                 ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81);
 445                 /* manual chroma comb .25 .5 .25 */
 446                 ks0127_and_or(sd, KS_VERTIC, 0x0f, 0x90);
 447
 448                 /* chroma path delay */
 449                 ks0127_and_or(sd, KS_CHROMB, 0x0f, 0x90);
 450
 451                 ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]);
 452                 ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]);
 453                 ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]);
 454                 ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]);
 455                 break;
 456
 457         case KS_INPUT_SVIDEO_1:
 458         case KS_INPUT_SVIDEO_2:
 459         case KS_INPUT_SVIDEO_3:
 460                 v4l2_dbg(1, debug, sd,
 461                         "s_routing %d: S-Video\n", input);
 462                 /* autodetect 50/60 Hz */
 463                 ks0127_and_or(sd, KS_CMDA,   0xfc, 0x00);
 464                 /* VSE=0 */
 465                 ks0127_and_or(sd, KS_CMDA,   ~0x40, 0x00);
 466                 /* set input line */
 467                 ks0127_and_or(sd, KS_CMDB,   0xb0, input);
 468                 /* non-freerunning mode */
 469                 ks0127_and_or(sd, KS_CMDC,   0x70, 0x0a);
 470                 /* analog input */
 471                 ks0127_and_or(sd, KS_CMDD,   0x03, 0x00);
 472                 /* enable chroma demodulation */
 473                 ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00);
 474                 ks0127_and_or(sd, KS_LUMA, 0x00,
 475                                reg_defaults[KS_LUMA]);
 476                 /* disable luma comb */
 477                 ks0127_and_or(sd, KS_VERTIA, 0x08,
 478                                (reg_defaults[KS_VERTIA]&0xf0)|0x01);
 479                 ks0127_and_or(sd, KS_VERTIC, 0x0f,
 480                                reg_defaults[KS_VERTIC]&0xf0);
 481
 482                 ks0127_and_or(sd, KS_CHROMB, 0x0f,
 483                                reg_defaults[KS_CHROMB]&0xf0);
 484
 485                 ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]);
 486                 ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]);
 487                 ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]);
 488                 ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]);
 489                 break;
 490
 491         case KS_INPUT_YUV656:
 492                 v4l2_dbg(1, debug, sd, "s_routing 15: YUV656\n");
 493                 if (ks->norm & V4L2_STD_525_60)
 494                         /* force 60 Hz */
 495                         ks0127_and_or(sd, KS_CMDA,   0xfc, 0x03);
 496                 else
 497                         /* force 50 Hz */
 498                         ks0127_and_or(sd, KS_CMDA,   0xfc, 0x02);
 499
 500                 ks0127_and_or(sd, KS_CMDA,   0xff, 0x40); /* VSE=1 */
 501                 /* set input line and VALIGN */
 502                 ks0127_and_or(sd, KS_CMDB,   0xb0, (input | 0x40));
 503                 /* freerunning mode, */
 504                 /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0  VMEM=1*/
 505                 ks0127_and_or(sd, KS_CMDC,   0x70, 0x87);
 506                 /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */
 507                 ks0127_and_or(sd, KS_CMDD,   0x03, 0x08);
 508                 /* disable chroma demodulation */
 509                 ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x30);
 510                 /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */
 511                 ks0127_and_or(sd, KS_LUMA,   0x00, 0x71);
 512                 ks0127_and_or(sd, KS_VERTIC, 0x0f,
 513                                reg_defaults[KS_VERTIC]&0xf0);
 514
 515                 /* scaler fullbw, luma comb off */
 516                 ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81);
 517
 518                 ks0127_and_or(sd, KS_CHROMB, 0x0f,
 519                                reg_defaults[KS_CHROMB]&0xf0);
 520
 521                 ks0127_and_or(sd, KS_CON, 0x00, 0x00);
 522                 ks0127_and_or(sd, KS_BRT, 0x00, 32);    /* spec: 34 */
 523                         /* spec: 229 (e5) */
 524                 ks0127_and_or(sd, KS_SAT, 0x00, 0xe8);
 525                 ks0127_and_or(sd, KS_HUE, 0x00, 0);
 526
 527                 ks0127_and_or(sd, KS_UGAIN, 0x00, 238);
 528                 ks0127_and_or(sd, KS_VGAIN, 0x00, 0x00);
 529
 530                 /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */
 531                 ks0127_and_or(sd, KS_UVOFFH, 0x00, 0x4f);
 532                 ks0127_and_or(sd, KS_UVOFFL, 0x00, 0x00);
 533                 break;
 534
 535         default:
 536                 v4l2_dbg(1, debug, sd,
 537                         "s_routing: Unknown input %d\n", input);
 538                 break;
 539         }
 540
 541         /* hack: CDMLPF sometimes spontaneously switches on; */
 542         /* force back off */
 543         ks0127_write(sd, KS_DEMOD, reg_defaults[KS_DEMOD]);
 544         return 0;
 545 }
 546
 547 static int ks0127_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 548 {
 549         struct ks0127 *ks = to_ks0127(sd);
 550
 551         /* Set to automatic SECAM/Fsc mode */
 552         ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00);
 553
 554         ks->norm = std;
 555         if (std & V4L2_STD_NTSC) {
 556                 v4l2_dbg(1, debug, sd,
 557                         "s_std: NTSC_M\n");
 558                 ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20);
 559         } else if (std & V4L2_STD_PAL_N) {
 560                 v4l2_dbg(1, debug, sd,
 561                         "s_std: NTSC_N (fixme)\n");
 562                 ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40);
 563         } else if (std & V4L2_STD_PAL) {
 564                 v4l2_dbg(1, debug, sd,
 565                         "s_std: PAL_N\n");
 566                 ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20);
 567         } else if (std & V4L2_STD_PAL_M) {
 568                 v4l2_dbg(1, debug, sd,
 569                         "s_std: PAL_M (fixme)\n");
 570                 ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40);
 571         } else if (std & V4L2_STD_SECAM) {
 572                 v4l2_dbg(1, debug, sd,
 573                         "s_std: SECAM\n");
 574
 575                 /* set to secam autodetection */
 576                 ks0127_and_or(sd, KS_CHROMA, 0xdf, 0x20);
 577                 ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00);
 578                 schedule_timeout_interruptible(HZ/10+1);
 579
 580                 /* did it autodetect? */
 581                 if (!(ks0127_read(sd, KS_DEMOD) & 0x40))
 582                         /* force to secam mode */
 583                         ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x0f);
 584         } else {
 585                 v4l2_dbg(1, debug, sd, "s_std: Unknown norm %llx\n",
 586                                (unsigned long long)std);
 587         }
 588         return 0;
 589 }
 590
 591 static int ks0127_s_stream(struct v4l2_subdev *sd, int enable)
 592 {
 593         v4l2_dbg(1, debug, sd, "s_stream(%d)\n", enable);
 594         if (enable) {
 595                 /* All output pins on */
 596                 ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x30);
 597                 /* Obey the OEN pin */
 598                 ks0127_and_or(sd, KS_CDEM, 0x7f, 0x00);
 599         } else {
 600                 /* Video output pins off */
 601                 ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x00);
 602                 /* Ignore the OEN pin */
 603                 ks0127_and_or(sd, KS_CDEM, 0x7f, 0x80);
 604         }
 605         return 0;
 606 }
 607
 608 static int ks0127_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd)
 609 {
 610         int stat = V4L2_IN_ST_NO_SIGNAL;
 611         u8 status;
 612         v4l2_std_id std = pstd ? *pstd : V4L2_STD_ALL;
 613
 614         status = ks0127_read(sd, KS_STAT);
 615         if (!(status & 0x20))            /* NOVID not set */
 616                 stat = 0;
 617         if (!(status & 0x01)) {               /* CLOCK set */
 618                 stat |= V4L2_IN_ST_NO_COLOR;
 619                 std = V4L2_STD_UNKNOWN;
 620         } else {
 621                 if ((status & 0x08))               /* PALDET set */
 622                         std &= V4L2_STD_PAL;
 623                 else
 624                         std &= V4L2_STD_NTSC;
 625         }
 626         if ((status & 0x10))               /* PALDET set */
 627                 std &= V4L2_STD_525_60;
 628         else
 629                 std &= V4L2_STD_625_50;
 630         if (pstd)
 631                 *pstd = std;
 632         if (pstatus)
 633                 *pstatus = stat;
 634         return 0;
 635 }
 636
 637 static int ks0127_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
 638 {
 639         v4l2_dbg(1, debug, sd, "querystd\n");
 640         return ks0127_status(sd, NULL, std);
 641 }
 642
 643 static int ks0127_g_input_status(struct v4l2_subdev *sd, u32 *status)
 644 {
 645         v4l2_dbg(1, debug, sd, "g_input_status\n");
 646         return ks0127_status(sd, status, NULL);
 647 }
 648
 649 /* ----------------------------------------------------------------------- */
 650
 651 static const struct v4l2_subdev_video_ops ks0127_video_ops = {
 652         .s_std = ks0127_s_std,
 653         .s_routing = ks0127_s_routing,
 654         .s_stream = ks0127_s_stream,
 655         .querystd = ks0127_querystd,
 656         .g_input_status = ks0127_g_input_status,
 657 };
 658
 659 static const struct v4l2_subdev_ops ks0127_ops = {
 660         .video = &ks0127_video_ops,
 661 };
 662
 663 /* ----------------------------------------------------------------------- */
 664
 665
 666 static int ks0127_probe(struct i2c_client *client, const struct i2c_device_id *id)
 667 {
 668         struct ks0127 *ks;
 669         struct v4l2_subdev *sd;
 670
 671         v4l_info(client, "%s chip found @ 0x%x (%s)\n",
 672                 client->addr == (I2C_KS0127_ADDON >> 1) ? "addon" : "on-board",
 673                 client->addr << 1, client->adapter->name);
 674
 675         ks = devm_kzalloc(&client->dev, sizeof(*ks), GFP_KERNEL);
 676         if (ks == NULL)
 677                 return -ENOMEM;
 678         sd = &ks->sd;
 679         v4l2_i2c_subdev_init(sd, client, &ks0127_ops);
 680
 681         /* power up */
 682         init_reg_defaults();
 683         ks0127_write(sd, KS_CMDA, 0x2c);
 684         mdelay(10);
 685
 686         /* reset the device */
 687         ks0127_init(sd);
 688         return 0;
 689 }
 690
 691 static int ks0127_remove(struct i2c_client *client)
 692 {
 693         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 694
 695         v4l2_device_unregister_subdev(sd);
 696         ks0127_write(sd, KS_OFMTA, 0x20); /* tristate */
 697         ks0127_write(sd, KS_CMDA, 0x2c | 0x80); /* power down */
 698         return 0;
 699 }
 700
 701 static const struct i2c_device_id ks0127_id[] = {
 702         { "ks0127", 0 },
 703         { "ks0127b", 0 },
 704         { "ks0122s", 0 },
 705         { }
 706 };
 707 MODULE_DEVICE_TABLE(i2c, ks0127_id);
 708
 709 static struct i2c_driver ks0127_driver = {
 710         .driver = {
 711                 .name   = "ks0127",
 712         },
 713         .probe          = ks0127_probe,
 714         .remove         = ks0127_remove,
 715         .id_table       = ks0127_id,
 716 };
 717
 718 module_i2c_driver(ks0127_driver);