drivers/media/i2c/soc_camera/ov2640.c

   1 /*
   2  * ov2640 Camera Driver
   3  *
   4  * Copyright (C) 2010 Alberto Panizzo <maramaopercheseimorto@gmail.com>
   5  *
   6  * Based on ov772x, ov9640 drivers and previous non merged implementations.
   7  *
   8  * Copyright 2005-2009 Freescale Semiconductor, Inc. All Rights Reserved.
   9  * Copyright (C) 2006, OmniVision
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/init.h>
  17 #include <linux/module.h>
  18 #include <linux/i2c.h>
  19 #include <linux/slab.h>
  20 #include <linux/delay.h>
  21 #include <linux/v4l2-mediabus.h>
  22 #include <linux/videodev2.h>
  23
  24 #include <media/soc_camera.h>
  25 #include <media/v4l2-chip-ident.h>
  26 #include <media/v4l2-subdev.h>
  27 #include <media/v4l2-ctrls.h>
  28
  29 #define VAL_SET(x, mask, rshift, lshift)  \
  30                 ((((x) >> rshift) & mask) << lshift)
  31 /*
  32  * DSP registers
  33  * register offset for BANK_SEL == BANK_SEL_DSP
  34  */
  35 #define R_BYPASS    0x05 /* Bypass DSP */
  36 #define   R_BYPASS_DSP_BYPAS    0x01 /* Bypass DSP, sensor out directly */
  37 #define   R_BYPASS_USE_DSP      0x00 /* Use the internal DSP */
  38 #define QS          0x44 /* Quantization Scale Factor */
  39 #define CTRLI       0x50
  40 #define   CTRLI_LP_DP           0x80
  41 #define   CTRLI_ROUND           0x40
  42 #define   CTRLI_V_DIV_SET(x)    VAL_SET(x, 0x3, 0, 3)
  43 #define   CTRLI_H_DIV_SET(x)    VAL_SET(x, 0x3, 0, 0)
  44 #define HSIZE       0x51 /* H_SIZE[7:0] (real/4) */
  45 #define   HSIZE_SET(x)          VAL_SET(x, 0xFF, 2, 0)
  46 #define VSIZE       0x52 /* V_SIZE[7:0] (real/4) */
  47 #define   VSIZE_SET(x)          VAL_SET(x, 0xFF, 2, 0)
  48 #define XOFFL       0x53 /* OFFSET_X[7:0] */
  49 #define   XOFFL_SET(x)          VAL_SET(x, 0xFF, 0, 0)
  50 #define YOFFL       0x54 /* OFFSET_Y[7:0] */
  51 #define   YOFFL_SET(x)          VAL_SET(x, 0xFF, 0, 0)
  52 #define VHYX        0x55 /* Offset and size completion */
  53 #define   VHYX_VSIZE_SET(x)     VAL_SET(x, 0x1, (8+2), 7)
  54 #define   VHYX_HSIZE_SET(x)     VAL_SET(x, 0x1, (8+2), 3)
  55 #define   VHYX_YOFF_SET(x)      VAL_SET(x, 0x3, 8, 4)
  56 #define   VHYX_XOFF_SET(x)      VAL_SET(x, 0x3, 8, 0)
  57 #define DPRP        0x56
  58 #define TEST        0x57 /* Horizontal size completion */
  59 #define   TEST_HSIZE_SET(x)     VAL_SET(x, 0x1, (9+2), 7)
  60 #define ZMOW        0x5A /* Zoom: Out Width  OUTW[7:0] (real/4) */
  61 #define   ZMOW_OUTW_SET(x)      VAL_SET(x, 0xFF, 2, 0)
  62 #define ZMOH        0x5B /* Zoom: Out Height OUTH[7:0] (real/4) */
  63 #define   ZMOH_OUTH_SET(x)      VAL_SET(x, 0xFF, 2, 0)
  64 #define ZMHH        0x5C /* Zoom: Speed and H&W completion */
  65 #define   ZMHH_ZSPEED_SET(x)    VAL_SET(x, 0x0F, 0, 4)
  66 #define   ZMHH_OUTH_SET(x)      VAL_SET(x, 0x1, (8+2), 2)
  67 #define   ZMHH_OUTW_SET(x)      VAL_SET(x, 0x3, (8+2), 0)
  68 #define BPADDR      0x7C /* SDE Indirect Register Access: Address */
  69 #define BPDATA      0x7D /* SDE Indirect Register Access: Data */
  70 #define CTRL2       0x86 /* DSP Module enable 2 */
  71 #define   CTRL2_DCW_EN          0x20
  72 #define   CTRL2_SDE_EN          0x10
  73 #define   CTRL2_UV_ADJ_EN       0x08
  74 #define   CTRL2_UV_AVG_EN       0x04
  75 #define   CTRL2_CMX_EN          0x01
  76 #define CTRL3       0x87 /* DSP Module enable 3 */
  77 #define   CTRL3_BPC_EN          0x80
  78 #define   CTRL3_WPC_EN          0x40
  79 #define SIZEL       0x8C /* Image Size Completion */
  80 #define   SIZEL_HSIZE8_11_SET(x) VAL_SET(x, 0x1, 11, 6)
  81 #define   SIZEL_HSIZE8_SET(x)    VAL_SET(x, 0x7, 0, 3)
  82 #define   SIZEL_VSIZE8_SET(x)    VAL_SET(x, 0x7, 0, 0)
  83 #define HSIZE8      0xC0 /* Image Horizontal Size HSIZE[10:3] */
  84 #define   HSIZE8_SET(x)         VAL_SET(x, 0xFF, 3, 0)
  85 #define VSIZE8      0xC1 /* Image Vertical Size VSIZE[10:3] */
  86 #define   VSIZE8_SET(x)         VAL_SET(x, 0xFF, 3, 0)
  87 #define CTRL0       0xC2 /* DSP Module enable 0 */
  88 #define   CTRL0_AEC_EN       0x80
  89 #define   CTRL0_AEC_SEL      0x40
  90 #define   CTRL0_STAT_SEL     0x20
  91 #define   CTRL0_VFIRST       0x10
  92 #define   CTRL0_YUV422       0x08
  93 #define   CTRL0_YUV_EN       0x04
  94 #define   CTRL0_RGB_EN       0x02
  95 #define   CTRL0_RAW_EN       0x01
  96 #define CTRL1       0xC3 /* DSP Module enable 1 */
  97 #define   CTRL1_CIP          0x80
  98 #define   CTRL1_DMY          0x40
  99 #define   CTRL1_RAW_GMA      0x20
 100 #define   CTRL1_DG           0x10
 101 #define   CTRL1_AWB          0x08
 102 #define   CTRL1_AWB_GAIN     0x04
 103 #define   CTRL1_LENC         0x02
 104 #define   CTRL1_PRE          0x01
 105 #define R_DVP_SP    0xD3 /* DVP output speed control */
 106 #define   R_DVP_SP_AUTO_MODE 0x80
 107 #define   R_DVP_SP_DVP_MASK  0x3F /* DVP PCLK = sysclk (48)/[6:0] (YUV0);
 108                                    *          = sysclk (48)/(2*[6:0]) (RAW);*/
 109 #define IMAGE_MODE  0xDA /* Image Output Format Select */
 110 #define   IMAGE_MODE_Y8_DVP_EN   0x40
 111 #define   IMAGE_MODE_JPEG_EN     0x10
 112 #define   IMAGE_MODE_YUV422      0x00
 113 #define   IMAGE_MODE_RAW10       0x04 /* (DVP) */
 114 #define   IMAGE_MODE_RGB565      0x08
 115 #define   IMAGE_MODE_HREF_VSYNC  0x02 /* HREF timing select in DVP JPEG output
 116                                        * mode (0 for HREF is same as sensor) */
 117 #define   IMAGE_MODE_LBYTE_FIRST 0x01 /* Byte swap enable for DVP
 118                                        *    1: Low byte first UYVY (C2[4] =0)
 119                                        *        VYUY (C2[4] =1)
 120                                        *    0: High byte first YUYV (C2[4]=0)
 121                                        *        YVYU (C2[4] = 1) */
 122 #define RESET       0xE0 /* Reset */
 123 #define   RESET_MICROC       0x40
 124 #define   RESET_SCCB         0x20
 125 #define   RESET_JPEG         0x10
 126 #define   RESET_DVP          0x04
 127 #define   RESET_IPU          0x02
 128 #define   RESET_CIF          0x01
 129 #define REGED       0xED /* Register ED */
 130 #define   REGED_CLK_OUT_DIS  0x10
 131 #define MS_SP       0xF0 /* SCCB Master Speed */
 132 #define SS_ID       0xF7 /* SCCB Slave ID */
 133 #define SS_CTRL     0xF8 /* SCCB Slave Control */
 134 #define   SS_CTRL_ADD_AUTO_INC  0x20
 135 #define   SS_CTRL_EN            0x08
 136 #define   SS_CTRL_DELAY_CLK     0x04
 137 #define   SS_CTRL_ACC_EN        0x02
 138 #define   SS_CTRL_SEN_PASS_THR  0x01
 139 #define MC_BIST     0xF9 /* Microcontroller misc register */
 140 #define   MC_BIST_RESET           0x80 /* Microcontroller Reset */
 141 #define   MC_BIST_BOOT_ROM_SEL    0x40
 142 #define   MC_BIST_12KB_SEL        0x20
 143 #define   MC_BIST_12KB_MASK       0x30
 144 #define   MC_BIST_512KB_SEL       0x08
 145 #define   MC_BIST_512KB_MASK      0x0C
 146 #define   MC_BIST_BUSY_BIT_R      0x02
 147 #define   MC_BIST_MC_RES_ONE_SH_W 0x02
 148 #define   MC_BIST_LAUNCH          0x01
 149 #define BANK_SEL    0xFF /* Register Bank Select */
 150 #define   BANK_SEL_DSP     0x00
 151 #define   BANK_SEL_SENS    0x01
 152
 153 /*
 154  * Sensor registers
 155  * register offset for BANK_SEL == BANK_SEL_SENS
 156  */
 157 #define GAIN        0x00 /* AGC - Gain control gain setting */
 158 #define COM1        0x03 /* Common control 1 */
 159 #define   COM1_1_DUMMY_FR          0x40
 160 #define   COM1_3_DUMMY_FR          0x80
 161 #define   COM1_7_DUMMY_FR          0xC0
 162 #define   COM1_VWIN_LSB_UXGA       0x0F
 163 #define   COM1_VWIN_LSB_SVGA       0x0A
 164 #define   COM1_VWIN_LSB_CIF        0x06
 165 #define REG04       0x04 /* Register 04 */
 166 #define   REG04_DEF             0x20 /* Always set */
 167 #define   REG04_HFLIP_IMG       0x80 /* Horizontal mirror image ON/OFF */
 168 #define   REG04_VFLIP_IMG       0x40 /* Vertical flip image ON/OFF */
 169 #define   REG04_VREF_EN         0x10
 170 #define   REG04_HREF_EN         0x08
 171 #define   REG04_AEC_SET(x)      VAL_SET(x, 0x3, 0, 0)
 172 #define REG08       0x08 /* Frame Exposure One-pin Control Pre-charge Row Num */
 173 #define COM2        0x09 /* Common control 2 */
 174 #define   COM2_SOFT_SLEEP_MODE  0x10 /* Soft sleep mode */
 175                                      /* Output drive capability */
 176 #define   COM2_OCAP_Nx_SET(N)   (((N) - 1) & 0x03) /* N = [1x .. 4x] */
 177 #define PID         0x0A /* Product ID Number MSB */
 178 #define VER         0x0B /* Product ID Number LSB */
 179 #define COM3        0x0C /* Common control 3 */
 180 #define   COM3_BAND_50H        0x04 /* 0 For Banding at 60H */
 181 #define   COM3_BAND_AUTO       0x02 /* Auto Banding */
 182 #define   COM3_SING_FR_SNAPSH  0x01 /* 0 For enable live video output after the
 183                                      * snapshot sequence*/
 184 #define AEC         0x10 /* AEC[9:2] Exposure Value */
 185 #define CLKRC       0x11 /* Internal clock */
 186 #define   CLKRC_EN             0x80
 187 #define   CLKRC_DIV_SET(x)     (((x) - 1) & 0x1F) /* CLK = XVCLK/(x) */
 188 #define COM7        0x12 /* Common control 7 */
 189 #define   COM7_SRST            0x80 /* Initiates system reset. All registers are
 190                                      * set to factory default values after which
 191                                      * the chip resumes normal operation */
 192 #define   COM7_RES_UXGA        0x00 /* Resolution selectors for UXGA */
 193 #define   COM7_RES_SVGA        0x40 /* SVGA */
 194 #define   COM7_RES_CIF         0x20 /* CIF */
 195 #define   COM7_ZOOM_EN         0x04 /* Enable Zoom mode */
 196 #define   COM7_COLOR_BAR_TEST  0x02 /* Enable Color Bar Test Pattern */
 197 #define COM8        0x13 /* Common control 8 */
 198 #define   COM8_DEF             0xC0 /* Banding filter ON/OFF */
 199 #define   COM8_BNDF_EN         0x20 /* Banding filter ON/OFF */
 200 #define   COM8_AGC_EN          0x04 /* AGC Auto/Manual control selection */
 201 #define   COM8_AEC_EN          0x01 /* Auto/Manual Exposure control */
 202 #define COM9        0x14 /* Common control 9
 203                           * Automatic gain ceiling - maximum AGC value [7:5]*/
 204 #define   COM9_AGC_GAIN_2x     0x00 /* 000 :   2x */
 205 #define   COM9_AGC_GAIN_4x     0x20 /* 001 :   4x */
 206 #define   COM9_AGC_GAIN_8x     0x40 /* 010 :   8x */
 207 #define   COM9_AGC_GAIN_16x    0x60 /* 011 :  16x */
 208 #define   COM9_AGC_GAIN_32x    0x80 /* 100 :  32x */
 209 #define   COM9_AGC_GAIN_64x    0xA0 /* 101 :  64x */
 210 #define   COM9_AGC_GAIN_128x   0xC0 /* 110 : 128x */
 211 #define COM10       0x15 /* Common control 10 */
 212 #define   COM10_PCLK_HREF      0x20 /* PCLK output qualified by HREF */
 213 #define   COM10_PCLK_RISE      0x10 /* Data is updated at the rising edge of
 214                                      * PCLK (user can latch data at the next
 215                                      * falling edge of PCLK).
 216                                      * 0 otherwise. */
 217 #define   COM10_HREF_INV       0x08 /* Invert HREF polarity:
 218                                      * HREF negative for valid data*/
 219 #define   COM10_VSINC_INV      0x02 /* Invert VSYNC polarity */
 220 #define HSTART      0x17 /* Horizontal Window start MSB 8 bit */
 221 #define HEND        0x18 /* Horizontal Window end MSB 8 bit */
 222 #define VSTART      0x19 /* Vertical Window start MSB 8 bit */
 223 #define VEND        0x1A /* Vertical Window end MSB 8 bit */
 224 #define MIDH        0x1C /* Manufacturer ID byte - high */
 225 #define MIDL        0x1D /* Manufacturer ID byte - low  */
 226 #define AEW         0x24 /* AGC/AEC - Stable operating region (upper limit) */
 227 #define AEB         0x25 /* AGC/AEC - Stable operating region (lower limit) */
 228 #define VV          0x26 /* AGC/AEC Fast mode operating region */
 229 #define   VV_HIGH_TH_SET(x)      VAL_SET(x, 0xF, 0, 4)
 230 #define   VV_LOW_TH_SET(x)       VAL_SET(x, 0xF, 0, 0)
 231 #define REG2A       0x2A /* Dummy pixel insert MSB */
 232 #define FRARL       0x2B /* Dummy pixel insert LSB */
 233 #define ADDVFL      0x2D /* LSB of insert dummy lines in Vertical direction */
 234 #define ADDVFH      0x2E /* MSB of insert dummy lines in Vertical direction */
 235 #define YAVG        0x2F /* Y/G Channel Average value */
 236 #define REG32       0x32 /* Common Control 32 */
 237 #define   REG32_PCLK_DIV_2    0x80 /* PCLK freq divided by 2 */
 238 #define   REG32_PCLK_DIV_4    0xC0 /* PCLK freq divided by 4 */
 239 #define ARCOM2      0x34 /* Zoom: Horizontal start point */
 240 #define REG45       0x45 /* Register 45 */
 241 #define FLL         0x46 /* Frame Length Adjustment LSBs */
 242 #define FLH         0x47 /* Frame Length Adjustment MSBs */
 243 #define COM19       0x48 /* Zoom: Vertical start point */
 244 #define ZOOMS       0x49 /* Zoom: Vertical start point */
 245 #define COM22       0x4B /* Flash light control */
 246 #define COM25       0x4E /* For Banding operations */
 247 #define BD50        0x4F /* 50Hz Banding AEC 8 LSBs */
 248 #define BD60        0x50 /* 60Hz Banding AEC 8 LSBs */
 249 #define REG5D       0x5D /* AVGsel[7:0],   16-zone average weight option */
 250 #define REG5E       0x5E /* AVGsel[15:8],  16-zone average weight option */
 251 #define REG5F       0x5F /* AVGsel[23:16], 16-zone average weight option */
 252 #define REG60       0x60 /* AVGsel[31:24], 16-zone average weight option */
 253 #define HISTO_LOW   0x61 /* Histogram Algorithm Low Level */
 254 #define HISTO_HIGH  0x62 /* Histogram Algorithm High Level */
 255
 256 /*
 257  * ID
 258  */
 259 #define MANUFACTURER_ID 0x7FA2
 260 #define PID_OV2640      0x2642
 261 #define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF))
 262
 263 /*
 264  * Struct
 265  */
 266 struct regval_list {
 267         u8 reg_num;
 268         u8 value;
 269 };
 270
 271 /* Supported resolutions */
 272 enum ov2640_width {
 273         W_QCIF  = 176,
 274         W_QVGA  = 320,
 275         W_CIF   = 352,
 276         W_VGA   = 640,
 277         W_SVGA  = 800,
 278         W_XGA   = 1024,
 279         W_SXGA  = 1280,
 280         W_UXGA  = 1600,
 281 };
 282
 283 enum ov2640_height {
 284         H_QCIF  = 144,
 285         H_QVGA  = 240,
 286         H_CIF   = 288,
 287         H_VGA   = 480,
 288         H_SVGA  = 600,
 289         H_XGA   = 768,
 290         H_SXGA  = 1024,
 291         H_UXGA  = 1200,
 292 };
 293
 294 struct ov2640_win_size {
 295         char                            *name;
 296         enum ov2640_width               width;
 297         enum ov2640_height              height;
 298         const struct regval_list        *regs;
 299 };
 300
 301
 302 struct ov2640_priv {
 303         struct v4l2_subdev              subdev;
 304         struct v4l2_ctrl_handler        hdl;
 305         enum v4l2_mbus_pixelcode        cfmt_code;
 306         const struct ov2640_win_size    *win;
 307         int                             model;
 308 };
 309
 310 /*
 311  * Registers settings
 312  */
 313
 314 #define ENDMARKER { 0xff, 0xff }
 315
 316 static const struct regval_list ov2640_init_regs[] = {
 317         { BANK_SEL, BANK_SEL_DSP },
 318         { 0x2c,   0xff },
 319         { 0x2e,   0xdf },
 320         { BANK_SEL, BANK_SEL_SENS },
 321         { 0x3c,   0x32 },
 322         { CLKRC, CLKRC_DIV_SET(1) },
 323         { COM2, COM2_OCAP_Nx_SET(3) },
 324         { REG04, REG04_DEF | REG04_HREF_EN },
 325         { COM8,  COM8_DEF | COM8_BNDF_EN | COM8_AGC_EN | COM8_AEC_EN },
 326         { COM9, COM9_AGC_GAIN_8x | 0x08},
 327         { 0x2c,   0x0c },
 328         { 0x33,   0x78 },
 329         { 0x3a,   0x33 },
 330         { 0x3b,   0xfb },
 331         { 0x3e,   0x00 },
 332         { 0x43,   0x11 },
 333         { 0x16,   0x10 },
 334         { 0x39,   0x02 },
 335         { 0x35,   0x88 },
 336         { 0x22,   0x0a },
 337         { 0x37,   0x40 },
 338         { 0x23,   0x00 },
 339         { ARCOM2, 0xa0 },
 340         { 0x06,   0x02 },
 341         { 0x06,   0x88 },
 342         { 0x07,   0xc0 },
 343         { 0x0d,   0xb7 },
 344         { 0x0e,   0x01 },
 345         { 0x4c,   0x00 },
 346         { 0x4a,   0x81 },
 347         { 0x21,   0x99 },
 348         { AEW,    0x40 },
 349         { AEB,    0x38 },
 350         { VV,     VV_HIGH_TH_SET(0x08) | VV_LOW_TH_SET(0x02) },
 351         { 0x5c,   0x00 },
 352         { 0x63,   0x00 },
 353         { FLL,    0x22 },
 354         { COM3,   0x38 | COM3_BAND_AUTO },
 355         { REG5D,  0x55 },
 356         { REG5E,  0x7d },
 357         { REG5F,  0x7d },
 358         { REG60,  0x55 },
 359         { HISTO_LOW,   0x70 },
 360         { HISTO_HIGH,  0x80 },
 361         { 0x7c,   0x05 },
 362         { 0x20,   0x80 },
 363         { 0x28,   0x30 },
 364         { 0x6c,   0x00 },
 365         { 0x6d,   0x80 },
 366         { 0x6e,   0x00 },
 367         { 0x70,   0x02 },
 368         { 0x71,   0x94 },
 369         { 0x73,   0xc1 },
 370         { 0x3d,   0x34 },
 371         { COM7, COM7_RES_UXGA | COM7_ZOOM_EN },
 372         { 0x5a,   0x57 },
 373         { BD50,   0xbb },
 374         { BD60,   0x9c },
 375         { BANK_SEL, BANK_SEL_DSP },
 376         { 0xe5,   0x7f },
 377         { MC_BIST, MC_BIST_RESET | MC_BIST_BOOT_ROM_SEL },
 378         { 0x41,   0x24 },
 379         { RESET, RESET_JPEG | RESET_DVP },
 380         { 0x76,   0xff },
 381         { 0x33,   0xa0 },
 382         { 0x42,   0x20 },
 383         { 0x43,   0x18 },
 384         { 0x4c,   0x00 },
 385         { CTRL3, CTRL3_BPC_EN | CTRL3_WPC_EN | 0x10 },
 386         { 0x88,   0x3f },
 387         { 0xd7,   0x03 },
 388         { 0xd9,   0x10 },
 389         { R_DVP_SP , R_DVP_SP_AUTO_MODE | 0x2 },
 390         { 0xc8,   0x08 },
 391         { 0xc9,   0x80 },
 392         { BPADDR, 0x00 },
 393         { BPDATA, 0x00 },
 394         { BPADDR, 0x03 },
 395         { BPDATA, 0x48 },
 396         { BPDATA, 0x48 },
 397         { BPADDR, 0x08 },
 398         { BPDATA, 0x20 },
 399         { BPDATA, 0x10 },
 400         { BPDATA, 0x0e },
 401         { 0x90,   0x00 },
 402         { 0x91,   0x0e },
 403         { 0x91,   0x1a },
 404         { 0x91,   0x31 },
 405         { 0x91,   0x5a },
 406         { 0x91,   0x69 },
 407         { 0x91,   0x75 },
 408         { 0x91,   0x7e },
 409         { 0x91,   0x88 },
 410         { 0x91,   0x8f },
 411         { 0x91,   0x96 },
 412         { 0x91,   0xa3 },
 413         { 0x91,   0xaf },
 414         { 0x91,   0xc4 },
 415         { 0x91,   0xd7 },
 416         { 0x91,   0xe8 },
 417         { 0x91,   0x20 },
 418         { 0x92,   0x00 },
 419         { 0x93,   0x06 },
 420         { 0x93,   0xe3 },
 421         { 0x93,   0x03 },
 422         { 0x93,   0x03 },
 423         { 0x93,   0x00 },
 424         { 0x93,   0x02 },
 425         { 0x93,   0x00 },
 426         { 0x93,   0x00 },
 427         { 0x93,   0x00 },
 428         { 0x93,   0x00 },
 429         { 0x93,   0x00 },
 430         { 0x93,   0x00 },
 431         { 0x93,   0x00 },
 432         { 0x96,   0x00 },
 433         { 0x97,   0x08 },
 434         { 0x97,   0x19 },
 435         { 0x97,   0x02 },
 436         { 0x97,   0x0c },
 437         { 0x97,   0x24 },
 438         { 0x97,   0x30 },
 439         { 0x97,   0x28 },
 440         { 0x97,   0x26 },
 441         { 0x97,   0x02 },
 442         { 0x97,   0x98 },
 443         { 0x97,   0x80 },
 444         { 0x97,   0x00 },
 445         { 0x97,   0x00 },
 446         { 0xa4,   0x00 },
 447         { 0xa8,   0x00 },
 448         { 0xc5,   0x11 },
 449         { 0xc6,   0x51 },
 450         { 0xbf,   0x80 },
 451         { 0xc7,   0x10 },
 452         { 0xb6,   0x66 },
 453         { 0xb8,   0xA5 },
 454         { 0xb7,   0x64 },
 455         { 0xb9,   0x7C },
 456         { 0xb3,   0xaf },
 457         { 0xb4,   0x97 },
 458         { 0xb5,   0xFF },
 459         { 0xb0,   0xC5 },
 460         { 0xb1,   0x94 },
 461         { 0xb2,   0x0f },
 462         { 0xc4,   0x5c },
 463         { 0xa6,   0x00 },
 464         { 0xa7,   0x20 },
 465         { 0xa7,   0xd8 },
 466         { 0xa7,   0x1b },
 467         { 0xa7,   0x31 },
 468         { 0xa7,   0x00 },
 469         { 0xa7,   0x18 },
 470         { 0xa7,   0x20 },
 471         { 0xa7,   0xd8 },
 472         { 0xa7,   0x19 },
 473         { 0xa7,   0x31 },
 474         { 0xa7,   0x00 },
 475         { 0xa7,   0x18 },
 476         { 0xa7,   0x20 },
 477         { 0xa7,   0xd8 },
 478         { 0xa7,   0x19 },
 479         { 0xa7,   0x31 },
 480         { 0xa7,   0x00 },
 481         { 0xa7,   0x18 },
 482         { 0x7f,   0x00 },
 483         { 0xe5,   0x1f },
 484         { 0xe1,   0x77 },
 485         { 0xdd,   0x7f },
 486         { CTRL0,  CTRL0_YUV422 | CTRL0_YUV_EN | CTRL0_RGB_EN },
 487         ENDMARKER,
 488 };
 489
 490 /*
 491  * Register settings for window size
 492  * The preamble, setup the internal DSP to input an UXGA (1600x1200) image.
 493  * Then the different zooming configurations will setup the output image size.
 494  */
 495 static const struct regval_list ov2640_size_change_preamble_regs[] = {
 496         { BANK_SEL, BANK_SEL_DSP },
 497         { RESET, RESET_DVP },
 498         { HSIZE8, HSIZE8_SET(W_UXGA) },
 499         { VSIZE8, VSIZE8_SET(H_UXGA) },
 500         { CTRL2, CTRL2_DCW_EN | CTRL2_SDE_EN |
 501                  CTRL2_UV_AVG_EN | CTRL2_CMX_EN | CTRL2_UV_ADJ_EN },
 502         { HSIZE, HSIZE_SET(W_UXGA) },
 503         { VSIZE, VSIZE_SET(H_UXGA) },
 504         { XOFFL, XOFFL_SET(0) },
 505         { YOFFL, YOFFL_SET(0) },
 506         { VHYX, VHYX_HSIZE_SET(W_UXGA) | VHYX_VSIZE_SET(H_UXGA) |
 507                 VHYX_XOFF_SET(0) | VHYX_YOFF_SET(0)},
 508         { TEST, TEST_HSIZE_SET(W_UXGA) },
 509         ENDMARKER,
 510 };
 511
 512 #define PER_SIZE_REG_SEQ(x, y, v_div, h_div, pclk_div)  \
 513         { CTRLI, CTRLI_LP_DP | CTRLI_V_DIV_SET(v_div) | \
 514                  CTRLI_H_DIV_SET(h_div)},               \
 515         { ZMOW, ZMOW_OUTW_SET(x) },                     \
 516         { ZMOH, ZMOH_OUTH_SET(y) },                     \
 517         { ZMHH, ZMHH_OUTW_SET(x) | ZMHH_OUTH_SET(y) },  \
 518         { R_DVP_SP, pclk_div },                         \
 519         { RESET, 0x00}
 520
 521 static const struct regval_list ov2640_qcif_regs[] = {
 522         PER_SIZE_REG_SEQ(W_QCIF, H_QCIF, 3, 3, 4),
 523         ENDMARKER,
 524 };
 525
 526 static const struct regval_list ov2640_qvga_regs[] = {
 527         PER_SIZE_REG_SEQ(W_QVGA, H_QVGA, 2, 2, 4),
 528         ENDMARKER,
 529 };
 530
 531 static const struct regval_list ov2640_cif_regs[] = {
 532         PER_SIZE_REG_SEQ(W_CIF, H_CIF, 2, 2, 8),
 533         ENDMARKER,
 534 };
 535
 536 static const struct regval_list ov2640_vga_regs[] = {
 537         PER_SIZE_REG_SEQ(W_VGA, H_VGA, 0, 0, 2),
 538         ENDMARKER,
 539 };
 540
 541 static const struct regval_list ov2640_svga_regs[] = {
 542         PER_SIZE_REG_SEQ(W_SVGA, H_SVGA, 1, 1, 2),
 543         ENDMARKER,
 544 };
 545
 546 static const struct regval_list ov2640_xga_regs[] = {
 547         PER_SIZE_REG_SEQ(W_XGA, H_XGA, 0, 0, 2),
 548         { CTRLI,    0x00},
 549         ENDMARKER,
 550 };
 551
 552 static const struct regval_list ov2640_sxga_regs[] = {
 553         PER_SIZE_REG_SEQ(W_SXGA, H_SXGA, 0, 0, 2),
 554         { CTRLI,    0x00},
 555         { R_DVP_SP, 2 | R_DVP_SP_AUTO_MODE },
 556         ENDMARKER,
 557 };
 558
 559 static const struct regval_list ov2640_uxga_regs[] = {
 560         PER_SIZE_REG_SEQ(W_UXGA, H_UXGA, 0, 0, 0),
 561         { CTRLI,    0x00},
 562         { R_DVP_SP, 0 | R_DVP_SP_AUTO_MODE },
 563         ENDMARKER,
 564 };
 565
 566 #define OV2640_SIZE(n, w, h, r) \
 567         {.name = n, .width = w , .height = h, .regs = r }
 568
 569 static const struct ov2640_win_size ov2640_supported_win_sizes[] = {
 570         OV2640_SIZE("QCIF", W_QCIF, H_QCIF, ov2640_qcif_regs),
 571         OV2640_SIZE("QVGA", W_QVGA, H_QVGA, ov2640_qvga_regs),
 572         OV2640_SIZE("CIF", W_CIF, H_CIF, ov2640_cif_regs),
 573         OV2640_SIZE("VGA", W_VGA, H_VGA, ov2640_vga_regs),
 574         OV2640_SIZE("SVGA", W_SVGA, H_SVGA, ov2640_svga_regs),
 575         OV2640_SIZE("XGA", W_XGA, H_XGA, ov2640_xga_regs),
 576         OV2640_SIZE("SXGA", W_SXGA, H_SXGA, ov2640_sxga_regs),
 577         OV2640_SIZE("UXGA", W_UXGA, H_UXGA, ov2640_uxga_regs),
 578 };
 579
 580 /*
 581  * Register settings for pixel formats
 582  */
 583 static const struct regval_list ov2640_format_change_preamble_regs[] = {
 584         { BANK_SEL, BANK_SEL_DSP },
 585         { R_BYPASS, R_BYPASS_USE_DSP },
 586         ENDMARKER,
 587 };
 588
 589 static const struct regval_list ov2640_yuyv_regs[] = {
 590         { IMAGE_MODE, IMAGE_MODE_YUV422 },
 591         { 0xd7, 0x03 },
 592         { 0x33, 0xa0 },
 593         { 0xe5, 0x1f },
 594         { 0xe1, 0x67 },
 595         { RESET,  0x00 },
 596         { R_BYPASS, R_BYPASS_USE_DSP },
 597         ENDMARKER,
 598 };
 599
 600 static const struct regval_list ov2640_uyvy_regs[] = {
 601         { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_YUV422 },
 602         { 0xd7, 0x01 },
 603         { 0x33, 0xa0 },
 604         { 0xe1, 0x67 },
 605         { RESET,  0x00 },
 606         { R_BYPASS, R_BYPASS_USE_DSP },
 607         ENDMARKER,
 608 };
 609
 610 static const struct regval_list ov2640_rgb565_be_regs[] = {
 611         { IMAGE_MODE, IMAGE_MODE_RGB565 },
 612         { 0xd7, 0x03 },
 613         { RESET,  0x00 },
 614         { R_BYPASS, R_BYPASS_USE_DSP },
 615         ENDMARKER,
 616 };
 617
 618 static const struct regval_list ov2640_rgb565_le_regs[] = {
 619         { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_RGB565 },
 620         { 0xd7, 0x03 },
 621         { RESET,  0x00 },
 622         { R_BYPASS, R_BYPASS_USE_DSP },
 623         ENDMARKER,
 624 };
 625
 626 static enum v4l2_mbus_pixelcode ov2640_codes[] = {
 627         V4L2_MBUS_FMT_YUYV8_2X8,
 628         V4L2_MBUS_FMT_UYVY8_2X8,
 629         V4L2_MBUS_FMT_RGB565_2X8_BE,
 630         V4L2_MBUS_FMT_RGB565_2X8_LE,
 631 };
 632
 633 /*
 634  * General functions
 635  */
 636 static struct ov2640_priv *to_ov2640(const struct i2c_client *client)
 637 {
 638         return container_of(i2c_get_clientdata(client), struct ov2640_priv,
 639                             subdev);
 640 }
 641
 642 static int ov2640_write_array(struct i2c_client *client,
 643                               const struct regval_list *vals)
 644 {
 645         int ret;
 646
 647         while ((vals->reg_num != 0xff) || (vals->value != 0xff)) {
 648                 ret = i2c_smbus_write_byte_data(client,
 649                                                 vals->reg_num, vals->value);
 650                 dev_vdbg(&client->dev, "array: 0x%02x, 0x%02x",
 651                          vals->reg_num, vals->value);
 652
 653                 if (ret < 0)
 654                         return ret;
 655                 vals++;
 656         }
 657         return 0;
 658 }
 659
 660 static int ov2640_mask_set(struct i2c_client *client,
 661                            u8  reg, u8  mask, u8  set)
 662 {
 663         s32 val = i2c_smbus_read_byte_data(client, reg);
 664         if (val < 0)
 665                 return val;
 666
 667         val &= ~mask;
 668         val |= set & mask;
 669
 670         dev_vdbg(&client->dev, "masks: 0x%02x, 0x%02x", reg, val);
 671
 672         return i2c_smbus_write_byte_data(client, reg, val);
 673 }
 674
 675 static int ov2640_reset(struct i2c_client *client)
 676 {
 677         int ret;
 678         const struct regval_list reset_seq[] = {
 679                 {BANK_SEL, BANK_SEL_SENS},
 680                 {COM7, COM7_SRST},
 681                 ENDMARKER,
 682         };
 683
 684         ret = ov2640_write_array(client, reset_seq);
 685         if (ret)
 686                 goto err;
 687
 688         msleep(5);
 689 err:
 690         dev_dbg(&client->dev, "%s: (ret %d)", __func__, ret);
 691         return ret;
 692 }
 693
 694 /*
 695  * soc_camera_ops functions
 696  */
 697 static int ov2640_s_stream(struct v4l2_subdev *sd, int enable)
 698 {
 699         return 0;
 700 }
 701
 702 static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl)
 703 {
 704         struct v4l2_subdev *sd =
 705                 &container_of(ctrl->handler, struct ov2640_priv, hdl)->subdev;
 706         struct i2c_client  *client = v4l2_get_subdevdata(sd);
 707         u8 val;
 708         int ret;
 709
 710         ret = i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS);
 711         if (ret < 0)
 712                 return ret;
 713
 714         switch (ctrl->id) {
 715         case V4L2_CID_VFLIP:
 716                 val = ctrl->val ? REG04_VFLIP_IMG : 0x00;
 717                 return ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
 718         case V4L2_CID_HFLIP:
 719                 val = ctrl->val ? REG04_HFLIP_IMG : 0x00;
 720                 return ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
 721         }
 722
 723         return -EINVAL;
 724 }
 725
 726 static int ov2640_g_chip_ident(struct v4l2_subdev *sd,
 727                                struct v4l2_dbg_chip_ident *id)
 728 {
 729         struct i2c_client *client = v4l2_get_subdevdata(sd);
 730         struct ov2640_priv *priv = to_ov2640(client);
 731
 732         id->ident    = priv->model;
 733         id->revision = 0;
 734
 735         return 0;
 736 }
 737
 738 #ifdef CONFIG_VIDEO_ADV_DEBUG
 739 static int ov2640_g_register(struct v4l2_subdev *sd,
 740                              struct v4l2_dbg_register *reg)
 741 {
 742         struct i2c_client *client = v4l2_get_subdevdata(sd);
 743         int ret;
 744
 745         reg->size = 1;
 746         if (reg->reg > 0xff)
 747                 return -EINVAL;
 748
 749         ret = i2c_smbus_read_byte_data(client, reg->reg);
 750         if (ret < 0)
 751                 return ret;
 752
 753         reg->val = ret;
 754
 755         return 0;
 756 }
 757
 758 static int ov2640_s_register(struct v4l2_subdev *sd,
 759                              const struct v4l2_dbg_register *reg)
 760 {
 761         struct i2c_client *client = v4l2_get_subdevdata(sd);
 762
 763         if (reg->reg > 0xff ||
 764             reg->val > 0xff)
 765                 return -EINVAL;
 766
 767         return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
 768 }
 769 #endif
 770
 771 static int ov2640_s_power(struct v4l2_subdev *sd, int on)
 772 {
 773         struct i2c_client *client = v4l2_get_subdevdata(sd);
 774         struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
 775
 776         return soc_camera_set_power(&client->dev, ssdd, on);
 777 }
 778
 779 /* Select the nearest higher resolution for capture */
 780 static const struct ov2640_win_size *ov2640_select_win(u32 *width, u32 *height)
 781 {
 782         int i, default_size = ARRAY_SIZE(ov2640_supported_win_sizes) - 1;
 783
 784         for (i = 0; i < ARRAY_SIZE(ov2640_supported_win_sizes); i++) {
 785                 if (ov2640_supported_win_sizes[i].width  >= *width &&
 786                     ov2640_supported_win_sizes[i].height >= *height) {
 787                         *width = ov2640_supported_win_sizes[i].width;
 788                         *height = ov2640_supported_win_sizes[i].height;
 789                         return &ov2640_supported_win_sizes[i];
 790                 }
 791         }
 792
 793         *width = ov2640_supported_win_sizes[default_size].width;
 794         *height = ov2640_supported_win_sizes[default_size].height;
 795         return &ov2640_supported_win_sizes[default_size];
 796 }
 797
 798 static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height,
 799                              enum v4l2_mbus_pixelcode code)
 800 {
 801         struct ov2640_priv       *priv = to_ov2640(client);
 802         const struct regval_list *selected_cfmt_regs;
 803         int ret;
 804
 805         /* select win */
 806         priv->win = ov2640_select_win(width, height);
 807
 808         /* select format */
 809         priv->cfmt_code = 0;
 810         switch (code) {
 811         case V4L2_MBUS_FMT_RGB565_2X8_BE:
 812                 dev_dbg(&client->dev, "%s: Selected cfmt RGB565 BE", __func__);
 813                 selected_cfmt_regs = ov2640_rgb565_be_regs;
 814                 break;
 815         case V4L2_MBUS_FMT_RGB565_2X8_LE:
 816                 dev_dbg(&client->dev, "%s: Selected cfmt RGB565 LE", __func__);
 817                 selected_cfmt_regs = ov2640_rgb565_le_regs;
 818                 break;
 819         case V4L2_MBUS_FMT_YUYV8_2X8:
 820                 dev_dbg(&client->dev, "%s: Selected cfmt YUYV (YUV422)", __func__);
 821                 selected_cfmt_regs = ov2640_yuyv_regs;
 822                 break;
 823         default:
 824         case V4L2_MBUS_FMT_UYVY8_2X8:
 825                 dev_dbg(&client->dev, "%s: Selected cfmt UYVY", __func__);
 826                 selected_cfmt_regs = ov2640_uyvy_regs;
 827         }
 828
 829         /* reset hardware */
 830         ov2640_reset(client);
 831
 832         /* initialize the sensor with default data */
 833         dev_dbg(&client->dev, "%s: Init default", __func__);
 834         ret = ov2640_write_array(client, ov2640_init_regs);
 835         if (ret < 0)
 836                 goto err;
 837
 838         /* select preamble */
 839         dev_dbg(&client->dev, "%s: Set size to %s", __func__, priv->win->name);
 840         ret = ov2640_write_array(client, ov2640_size_change_preamble_regs);
 841         if (ret < 0)
 842                 goto err;
 843
 844         /* set size win */
 845         ret = ov2640_write_array(client, priv->win->regs);
 846         if (ret < 0)
 847                 goto err;
 848
 849         /* cfmt preamble */
 850         dev_dbg(&client->dev, "%s: Set cfmt", __func__);
 851         ret = ov2640_write_array(client, ov2640_format_change_preamble_regs);
 852         if (ret < 0)
 853                 goto err;
 854
 855         /* set cfmt */
 856         ret = ov2640_write_array(client, selected_cfmt_regs);
 857         if (ret < 0)
 858                 goto err;
 859
 860         priv->cfmt_code = code;
 861         *width = priv->win->width;
 862         *height = priv->win->height;
 863
 864         return 0;
 865
 866 err:
 867         dev_err(&client->dev, "%s: Error %d", __func__, ret);
 868         ov2640_reset(client);
 869         priv->win = NULL;
 870
 871         return ret;
 872 }
 873
 874 static int ov2640_g_fmt(struct v4l2_subdev *sd,
 875                         struct v4l2_mbus_framefmt *mf)
 876 {
 877         struct i2c_client  *client = v4l2_get_subdevdata(sd);
 878         struct ov2640_priv *priv = to_ov2640(client);
 879
 880         if (!priv->win) {
 881                 u32 width = W_SVGA, height = H_SVGA;
 882                 priv->win = ov2640_select_win(&width, &height);
 883                 priv->cfmt_code = V4L2_MBUS_FMT_UYVY8_2X8;
 884         }
 885
 886         mf->width       = priv->win->width;
 887         mf->height      = priv->win->height;
 888         mf->code        = priv->cfmt_code;
 889
 890         switch (mf->code) {
 891         case V4L2_MBUS_FMT_RGB565_2X8_BE:
 892         case V4L2_MBUS_FMT_RGB565_2X8_LE:
 893                 mf->colorspace = V4L2_COLORSPACE_SRGB;
 894                 break;
 895         default:
 896         case V4L2_MBUS_FMT_YUYV8_2X8:
 897         case V4L2_MBUS_FMT_UYVY8_2X8:
 898                 mf->colorspace = V4L2_COLORSPACE_JPEG;
 899         }
 900         mf->field       = V4L2_FIELD_NONE;
 901
 902         return 0;
 903 }
 904
 905 static int ov2640_s_fmt(struct v4l2_subdev *sd,
 906                         struct v4l2_mbus_framefmt *mf)
 907 {
 908         struct i2c_client *client = v4l2_get_subdevdata(sd);
 909         int ret;
 910
 911
 912         switch (mf->code) {
 913         case V4L2_MBUS_FMT_RGB565_2X8_BE:
 914         case V4L2_MBUS_FMT_RGB565_2X8_LE:
 915                 mf->colorspace = V4L2_COLORSPACE_SRGB;
 916                 break;
 917         default:
 918                 mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
 919         case V4L2_MBUS_FMT_YUYV8_2X8:
 920         case V4L2_MBUS_FMT_UYVY8_2X8:
 921                 mf->colorspace = V4L2_COLORSPACE_JPEG;
 922         }
 923
 924         ret = ov2640_set_params(client, &mf->width, &mf->height, mf->code);
 925
 926         return ret;
 927 }
 928
 929 static int ov2640_try_fmt(struct v4l2_subdev *sd,
 930                           struct v4l2_mbus_framefmt *mf)
 931 {
 932         /*
 933          * select suitable win, but don't store it
 934          */
 935         ov2640_select_win(&mf->width, &mf->height);
 936
 937         mf->field       = V4L2_FIELD_NONE;
 938
 939         switch (mf->code) {
 940         case V4L2_MBUS_FMT_RGB565_2X8_BE:
 941         case V4L2_MBUS_FMT_RGB565_2X8_LE:
 942                 mf->colorspace = V4L2_COLORSPACE_SRGB;
 943                 break;
 944         default:
 945                 mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
 946         case V4L2_MBUS_FMT_YUYV8_2X8:
 947         case V4L2_MBUS_FMT_UYVY8_2X8:
 948                 mf->colorspace = V4L2_COLORSPACE_JPEG;
 949         }
 950
 951         return 0;
 952 }
 953
 954 static int ov2640_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 955                            enum v4l2_mbus_pixelcode *code)
 956 {
 957         if (index >= ARRAY_SIZE(ov2640_codes))
 958                 return -EINVAL;
 959
 960         *code = ov2640_codes[index];
 961         return 0;
 962 }
 963
 964 static int ov2640_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 965 {
 966         a->c.left       = 0;
 967         a->c.top        = 0;
 968         a->c.width      = W_UXGA;
 969         a->c.height     = H_UXGA;
 970         a->type         = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 971
 972         return 0;
 973 }
 974
 975 static int ov2640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 976 {
 977         a->bounds.left                  = 0;
 978         a->bounds.top                   = 0;
 979         a->bounds.width                 = W_UXGA;
 980         a->bounds.height                = H_UXGA;
 981         a->defrect                      = a->bounds;
 982         a->type                         = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 983         a->pixelaspect.numerator        = 1;
 984         a->pixelaspect.denominator      = 1;
 985
 986         return 0;
 987 }
 988
 989 static int ov2640_video_probe(struct i2c_client *client)
 990 {
 991         struct ov2640_priv *priv = to_ov2640(client);
 992         u8 pid, ver, midh, midl;
 993         const char *devname;
 994         int ret;
 995
 996         ret = ov2640_s_power(&priv->subdev, 1);
 997         if (ret < 0)
 998                 return ret;
 999
1000         /*
1001          * check and show product ID and manufacturer ID
1002          */
1003         i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS);
1004         pid  = i2c_smbus_read_byte_data(client, PID);
1005         ver  = i2c_smbus_read_byte_data(client, VER);
1006         midh = i2c_smbus_read_byte_data(client, MIDH);
1007         midl = i2c_smbus_read_byte_data(client, MIDL);
1008
1009         switch (VERSION(pid, ver)) {
1010         case PID_OV2640:
1011                 devname     = "ov2640";
1012                 priv->model = V4L2_IDENT_OV2640;
1013                 break;
1014         default:
1015                 dev_err(&client->dev,
1016                         "Product ID error %x:%x\n", pid, ver);
1017                 ret = -ENODEV;
1018                 goto done;
1019         }
1020
1021         dev_info(&client->dev,
1022                  "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
1023                  devname, pid, ver, midh, midl);
1024
1025         ret = v4l2_ctrl_handler_setup(&priv->hdl);
1026
1027 done:
1028         ov2640_s_power(&priv->subdev, 0);
1029         return ret;
1030 }
1031
1032 static const struct v4l2_ctrl_ops ov2640_ctrl_ops = {
1033         .s_ctrl = ov2640_s_ctrl,
1034 };
1035
1036 static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = {
1037         .g_chip_ident   = ov2640_g_chip_ident,
1038 #ifdef CONFIG_VIDEO_ADV_DEBUG
1039         .g_register     = ov2640_g_register,
1040         .s_register     = ov2640_s_register,
1041 #endif
1042         .s_power        = ov2640_s_power,
1043 };
1044
1045 static int ov2640_g_mbus_config(struct v4l2_subdev *sd,
1046                                 struct v4l2_mbus_config *cfg)
1047 {
1048         struct i2c_client *client = v4l2_get_subdevdata(sd);
1049         struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
1050
1051         cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
1052                 V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
1053                 V4L2_MBUS_DATA_ACTIVE_HIGH;
1054         cfg->type = V4L2_MBUS_PARALLEL;
1055         cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
1056
1057         return 0;
1058 }
1059
1060 static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = {
1061         .s_stream       = ov2640_s_stream,
1062         .g_mbus_fmt     = ov2640_g_fmt,
1063         .s_mbus_fmt     = ov2640_s_fmt,
1064         .try_mbus_fmt   = ov2640_try_fmt,
1065         .cropcap        = ov2640_cropcap,
1066         .g_crop         = ov2640_g_crop,
1067         .enum_mbus_fmt  = ov2640_enum_fmt,
1068         .g_mbus_config  = ov2640_g_mbus_config,
1069 };
1070
1071 static struct v4l2_subdev_ops ov2640_subdev_ops = {
1072         .core   = &ov2640_subdev_core_ops,
1073         .video  = &ov2640_subdev_video_ops,
1074 };
1075
1076 /*
1077  * i2c_driver functions
1078  */
1079 static int ov2640_probe(struct i2c_client *client,
1080                         const struct i2c_device_id *did)
1081 {
1082         struct ov2640_priv      *priv;
1083         struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
1084         struct i2c_adapter      *adapter = to_i2c_adapter(client->dev.parent);
1085         int                     ret;
1086
1087         if (!ssdd) {
1088                 dev_err(&adapter->dev,
1089                         "OV2640: Missing platform_data for driver\n");
1090                 return -EINVAL;
1091         }
1092
1093         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1094                 dev_err(&adapter->dev,
1095                         "OV2640: I2C-Adapter doesn't support SMBUS\n");
1096                 return -EIO;
1097         }
1098
1099         priv = devm_kzalloc(&client->dev, sizeof(struct ov2640_priv), GFP_KERNEL);
1100         if (!priv) {
1101                 dev_err(&adapter->dev,
1102                         "Failed to allocate memory for private data!\n");
1103                 return -ENOMEM;
1104         }
1105
1106         v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops);
1107         v4l2_ctrl_handler_init(&priv->hdl, 2);
1108         v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops,
1109                         V4L2_CID_VFLIP, 0, 1, 1, 0);
1110         v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops,
1111                         V4L2_CID_HFLIP, 0, 1, 1, 0);
1112         priv->subdev.ctrl_handler = &priv->hdl;
1113         if (priv->hdl.error)
1114                 return priv->hdl.error;
1115
1116         ret = ov2640_video_probe(client);
1117         if (ret)
1118                 v4l2_ctrl_handler_free(&priv->hdl);
1119         else
1120                 dev_info(&adapter->dev, "OV2640 Probed\n");
1121
1122         return ret;
1123 }
1124
1125 static int ov2640_remove(struct i2c_client *client)
1126 {
1127         struct ov2640_priv       *priv = to_ov2640(client);
1128
1129         v4l2_device_unregister_subdev(&priv->subdev);
1130         v4l2_ctrl_handler_free(&priv->hdl);
1131         return 0;
1132 }
1133
1134 static const struct i2c_device_id ov2640_id[] = {
1135         { "ov2640", 0 },
1136         { }
1137 };
1138 MODULE_DEVICE_TABLE(i2c, ov2640_id);
1139
1140 static struct i2c_driver ov2640_i2c_driver = {
1141         .driver = {
1142                 .name = "ov2640",
1143         },
1144         .probe    = ov2640_probe,
1145         .remove   = ov2640_remove,
1146         .id_table = ov2640_id,
1147 };
1148
1149 module_i2c_driver(ov2640_i2c_driver);
1150
1151 MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor");
1152 MODULE_AUTHOR("Alberto Panizzo");
1153 MODULE_LICENSE("GPL v2");