drivers/media/i2c/tw9910.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * tw9910 Video Driver
   4  *
   5  * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
   6  *
   7  * Copyright (C) 2008 Renesas Solutions Corp.
   8  * Kuninori Morimoto <morimoto.kuninori@renesas.com>
   9  *
  10  * Based on ov772x driver,
  11  *
  12  * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
  13  * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
  14  * Copyright (C) 2008 Magnus Damm
  15  * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
  16  */
  17
  18 #include <linux/clk.h>
  19 #include <linux/delay.h>
  20 #include <linux/gpio/consumer.h>
  21 #include <linux/i2c.h>
  22 #include <linux/init.h>
  23 #include <linux/kernel.h>
  24 #include <linux/module.h>
  25 #include <linux/slab.h>
  26 #include <linux/v4l2-mediabus.h>
  27 #include <linux/videodev2.h>
  28
  29 #include <media/i2c/tw9910.h>
  30 #include <media/v4l2-subdev.h>
  31
  32 #define GET_ID(val)  ((val & 0xF8) >> 3)
  33 #define GET_REV(val) (val & 0x07)
  34
  35 /*
  36  * register offset
  37  */
  38 #define ID              0x00 /* Product ID Code Register */
  39 #define STATUS1         0x01 /* Chip Status Register I */
  40 #define INFORM          0x02 /* Input Format */
  41 #define OPFORM          0x03 /* Output Format Control Register */
  42 #define DLYCTR          0x04 /* Hysteresis and HSYNC Delay Control */
  43 #define OUTCTR1         0x05 /* Output Control I */
  44 #define ACNTL1          0x06 /* Analog Control Register 1 */
  45 #define CROP_HI         0x07 /* Cropping Register, High */
  46 #define VDELAY_LO       0x08 /* Vertical Delay Register, Low */
  47 #define VACTIVE_LO      0x09 /* Vertical Active Register, Low */
  48 #define HDELAY_LO       0x0A /* Horizontal Delay Register, Low */
  49 #define HACTIVE_LO      0x0B /* Horizontal Active Register, Low */
  50 #define CNTRL1          0x0C /* Control Register I */
  51 #define VSCALE_LO       0x0D /* Vertical Scaling Register, Low */
  52 #define SCALE_HI        0x0E /* Scaling Register, High */
  53 #define HSCALE_LO       0x0F /* Horizontal Scaling Register, Low */
  54 #define BRIGHT          0x10 /* BRIGHTNESS Control Register */
  55 #define CONTRAST        0x11 /* CONTRAST Control Register */
  56 #define SHARPNESS       0x12 /* SHARPNESS Control Register I */
  57 #define SAT_U           0x13 /* Chroma (U) Gain Register */
  58 #define SAT_V           0x14 /* Chroma (V) Gain Register */
  59 #define HUE             0x15 /* Hue Control Register */
  60 #define CORING1         0x17
  61 #define CORING2         0x18 /* Coring and IF compensation */
  62 #define VBICNTL         0x19 /* VBI Control Register */
  63 #define ACNTL2          0x1A /* Analog Control 2 */
  64 #define OUTCTR2         0x1B /* Output Control 2 */
  65 #define SDT             0x1C /* Standard Selection */
  66 #define SDTR            0x1D /* Standard Recognition */
  67 #define TEST            0x1F /* Test Control Register */
  68 #define CLMPG           0x20 /* Clamping Gain */
  69 #define IAGC            0x21 /* Individual AGC Gain */
  70 #define AGCGAIN         0x22 /* AGC Gain */
  71 #define PEAKWT          0x23 /* White Peak Threshold */
  72 #define CLMPL           0x24 /* Clamp level */
  73 #define SYNCT           0x25 /* Sync Amplitude */
  74 #define MISSCNT         0x26 /* Sync Miss Count Register */
  75 #define PCLAMP          0x27 /* Clamp Position Register */
  76 #define VCNTL1          0x28 /* Vertical Control I */
  77 #define VCNTL2          0x29 /* Vertical Control II */
  78 #define CKILL           0x2A /* Color Killer Level Control */
  79 #define COMB            0x2B /* Comb Filter Control */
  80 #define LDLY            0x2C /* Luma Delay and H Filter Control */
  81 #define MISC1           0x2D /* Miscellaneous Control I */
  82 #define LOOP            0x2E /* LOOP Control Register */
  83 #define MISC2           0x2F /* Miscellaneous Control II */
  84 #define MVSN            0x30 /* Macrovision Detection */
  85 #define STATUS2         0x31 /* Chip STATUS II */
  86 #define HFREF           0x32 /* H monitor */
  87 #define CLMD            0x33 /* CLAMP MODE */
  88 #define IDCNTL          0x34 /* ID Detection Control */
  89 #define CLCNTL1         0x35 /* Clamp Control I */
  90 #define ANAPLLCTL       0x4C
  91 #define VBIMIN          0x4D
  92 #define HSLOWCTL        0x4E
  93 #define WSS3            0x4F
  94 #define FILLDATA        0x50
  95 #define SDID            0x51
  96 #define DID             0x52
  97 #define WSS1            0x53
  98 #define WSS2            0x54
  99 #define VVBI            0x55
 100 #define LCTL6           0x56
 101 #define LCTL7           0x57
 102 #define LCTL8           0x58
 103 #define LCTL9           0x59
 104 #define LCTL10          0x5A
 105 #define LCTL11          0x5B
 106 #define LCTL12          0x5C
 107 #define LCTL13          0x5D
 108 #define LCTL14          0x5E
 109 #define LCTL15          0x5F
 110 #define LCTL16          0x60
 111 #define LCTL17          0x61
 112 #define LCTL18          0x62
 113 #define LCTL19          0x63
 114 #define LCTL20          0x64
 115 #define LCTL21          0x65
 116 #define LCTL22          0x66
 117 #define LCTL23          0x67
 118 #define LCTL24          0x68
 119 #define LCTL25          0x69
 120 #define LCTL26          0x6A
 121 #define HSBEGIN         0x6B
 122 #define HSEND           0x6C
 123 #define OVSDLY          0x6D
 124 #define OVSEND          0x6E
 125 #define VBIDELAY        0x6F
 126
 127 /*
 128  * register detail
 129  */
 130
 131 /* INFORM */
 132 #define FC27_ON     0x40 /* 1 : Input crystal clock frequency is 27MHz */
 133 #define FC27_FF     0x00 /* 0 : Square pixel mode. */
 134                          /*     Must use 24.54MHz for 60Hz field rate */
 135                          /*     source or 29.5MHz for 50Hz field rate */
 136 #define IFSEL_S     0x10 /* 01 : S-video decoding */
 137 #define IFSEL_C     0x00 /* 00 : Composite video decoding */
 138                          /* Y input video selection */
 139 #define YSEL_M0     0x00 /*  00 : Mux0 selected */
 140 #define YSEL_M1     0x04 /*  01 : Mux1 selected */
 141 #define YSEL_M2     0x08 /*  10 : Mux2 selected */
 142 #define YSEL_M3     0x10 /*  11 : Mux3 selected */
 143
 144 /* OPFORM */
 145 #define MODE        0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */
 146                          /* 1 : ITU-R-656 compatible data sequence format */
 147 #define LEN         0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */
 148                          /* 1 : 16-bit YCrCb 4:2:2 output format.*/
 149 #define LLCMODE     0x20 /* 1 : LLC output mode. */
 150                          /* 0 : free-run output mode */
 151 #define AINC        0x10 /* Serial interface auto-indexing control */
 152                          /* 0 : auto-increment */
 153                          /* 1 : non-auto */
 154 #define VSCTL       0x08 /* 1 : Vertical out ctrl by DVALID */
 155                          /* 0 : Vertical out ctrl by HACTIVE and DVALID */
 156 #define OEN_TRI_SEL_MASK        0x07
 157 #define OEN_TRI_SEL_ALL_ON      0x00 /* Enable output for Rev0/Rev1 */
 158 #define OEN_TRI_SEL_ALL_OFF_r0  0x06 /* All tri-stated for Rev0 */
 159 #define OEN_TRI_SEL_ALL_OFF_r1  0x07 /* All tri-stated for Rev1 */
 160
 161 /* OUTCTR1 */
 162 #define VSP_LO      0x00 /* 0 : VS pin output polarity is active low */
 163 #define VSP_HI      0x80 /* 1 : VS pin output polarity is active high. */
 164                          /* VS pin output control */
 165 #define VSSL_VSYNC  0x00 /*   0 : VSYNC  */
 166 #define VSSL_VACT   0x10 /*   1 : VACT   */
 167 #define VSSL_FIELD  0x20 /*   2 : FIELD  */
 168 #define VSSL_VVALID 0x30 /*   3 : VVALID */
 169 #define VSSL_ZERO   0x70 /*   7 : 0      */
 170 #define HSP_LOW     0x00 /* 0 : HS pin output polarity is active low */
 171 #define HSP_HI      0x08 /* 1 : HS pin output polarity is active high.*/
 172                          /* HS pin output control */
 173 #define HSSL_HACT   0x00 /*   0 : HACT   */
 174 #define HSSL_HSYNC  0x01 /*   1 : HSYNC  */
 175 #define HSSL_DVALID 0x02 /*   2 : DVALID */
 176 #define HSSL_HLOCK  0x03 /*   3 : HLOCK  */
 177 #define HSSL_ASYNCW 0x04 /*   4 : ASYNCW */
 178 #define HSSL_ZERO   0x07 /*   7 : 0      */
 179
 180 /* ACNTL1 */
 181 #define SRESET      0x80 /* resets the device to its default state
 182                           * but all register content remain unchanged.
 183                           * This bit is self-resetting.
 184                           */
 185 #define ACNTL1_PDN_MASK 0x0e
 186 #define CLK_PDN         0x08 /* system clock power down */
 187 #define Y_PDN           0x04 /* Luma ADC power down */
 188 #define C_PDN           0x02 /* Chroma ADC power down */
 189
 190 /* ACNTL2 */
 191 #define ACNTL2_PDN_MASK 0x40
 192 #define PLL_PDN         0x40 /* PLL power down */
 193
 194 /* VBICNTL */
 195
 196 /* RTSEL : control the real time signal output from the MPOUT pin */
 197 #define RTSEL_MASK  0x07
 198 #define RTSEL_VLOSS 0x00 /* 0000 = Video loss */
 199 #define RTSEL_HLOCK 0x01 /* 0001 = H-lock */
 200 #define RTSEL_SLOCK 0x02 /* 0010 = S-lock */
 201 #define RTSEL_VLOCK 0x03 /* 0011 = V-lock */
 202 #define RTSEL_MONO  0x04 /* 0100 = MONO */
 203 #define RTSEL_DET50 0x05 /* 0101 = DET50 */
 204 #define RTSEL_FIELD 0x06 /* 0110 = FIELD */
 205 #define RTSEL_RTCO  0x07 /* 0111 = RTCO ( Real Time Control ) */
 206
 207 /* HSYNC start and end are constant for now */
 208 #define HSYNC_START     0x0260
 209 #define HSYNC_END       0x0300
 210
 211 /*
 212  * structure
 213  */
 214
 215 struct regval_list {
 216         unsigned char reg_num;
 217         unsigned char value;
 218 };
 219
 220 struct tw9910_scale_ctrl {
 221         char           *name;
 222         unsigned short  width;
 223         unsigned short  height;
 224         u16             hscale;
 225         u16             vscale;
 226 };
 227
 228 struct tw9910_priv {
 229         struct v4l2_subdev              subdev;
 230         struct clk                      *clk;
 231         struct tw9910_video_info        *info;
 232         struct gpio_desc                *pdn_gpio;
 233         struct gpio_desc                *rstb_gpio;
 234         const struct tw9910_scale_ctrl  *scale;
 235         v4l2_std_id                     norm;
 236         u32                             revision;
 237 };
 238
 239 static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = {
 240         {
 241                 .name   = "NTSC SQ",
 242                 .width  = 640,
 243                 .height = 480,
 244                 .hscale = 0x0100,
 245                 .vscale = 0x0100,
 246         },
 247         {
 248                 .name   = "NTSC CCIR601",
 249                 .width  = 720,
 250                 .height = 480,
 251                 .hscale = 0x0100,
 252                 .vscale = 0x0100,
 253         },
 254         {
 255                 .name   = "NTSC SQ (CIF)",
 256                 .width  = 320,
 257                 .height = 240,
 258                 .hscale = 0x0200,
 259                 .vscale = 0x0200,
 260         },
 261         {
 262                 .name   = "NTSC CCIR601 (CIF)",
 263                 .width  = 360,
 264                 .height = 240,
 265                 .hscale = 0x0200,
 266                 .vscale = 0x0200,
 267         },
 268         {
 269                 .name   = "NTSC SQ (QCIF)",
 270                 .width  = 160,
 271                 .height = 120,
 272                 .hscale = 0x0400,
 273                 .vscale = 0x0400,
 274         },
 275         {
 276                 .name   = "NTSC CCIR601 (QCIF)",
 277                 .width  = 180,
 278                 .height = 120,
 279                 .hscale = 0x0400,
 280                 .vscale = 0x0400,
 281         },
 282 };
 283
 284 static const struct tw9910_scale_ctrl tw9910_pal_scales[] = {
 285         {
 286                 .name   = "PAL SQ",
 287                 .width  = 768,
 288                 .height = 576,
 289                 .hscale = 0x0100,
 290                 .vscale = 0x0100,
 291         },
 292         {
 293                 .name   = "PAL CCIR601",
 294                 .width  = 720,
 295                 .height = 576,
 296                 .hscale = 0x0100,
 297                 .vscale = 0x0100,
 298         },
 299         {
 300                 .name   = "PAL SQ (CIF)",
 301                 .width  = 384,
 302                 .height = 288,
 303                 .hscale = 0x0200,
 304                 .vscale = 0x0200,
 305         },
 306         {
 307                 .name   = "PAL CCIR601 (CIF)",
 308                 .width  = 360,
 309                 .height = 288,
 310                 .hscale = 0x0200,
 311                 .vscale = 0x0200,
 312         },
 313         {
 314                 .name   = "PAL SQ (QCIF)",
 315                 .width  = 192,
 316                 .height = 144,
 317                 .hscale = 0x0400,
 318                 .vscale = 0x0400,
 319         },
 320         {
 321                 .name   = "PAL CCIR601 (QCIF)",
 322                 .width  = 180,
 323                 .height = 144,
 324                 .hscale = 0x0400,
 325                 .vscale = 0x0400,
 326         },
 327 };
 328
 329 /*
 330  * general function
 331  */
 332 static struct tw9910_priv *to_tw9910(const struct i2c_client *client)
 333 {
 334         return container_of(i2c_get_clientdata(client), struct tw9910_priv,
 335                             subdev);
 336 }
 337
 338 static int tw9910_mask_set(struct i2c_client *client, u8 command,
 339                            u8 mask, u8 set)
 340 {
 341         s32 val = i2c_smbus_read_byte_data(client, command);
 342
 343         if (val < 0)
 344                 return val;
 345
 346         val &= ~mask;
 347         val |= set & mask;
 348
 349         return i2c_smbus_write_byte_data(client, command, val);
 350 }
 351
 352 static int tw9910_set_scale(struct i2c_client *client,
 353                             const struct tw9910_scale_ctrl *scale)
 354 {
 355         int ret;
 356
 357         ret = i2c_smbus_write_byte_data(client, SCALE_HI,
 358                                         (scale->vscale & 0x0F00) >> 4 |
 359                                         (scale->hscale & 0x0F00) >> 8);
 360         if (ret < 0)
 361                 return ret;
 362
 363         ret = i2c_smbus_write_byte_data(client, HSCALE_LO,
 364                                         scale->hscale & 0x00FF);
 365         if (ret < 0)
 366                 return ret;
 367
 368         ret = i2c_smbus_write_byte_data(client, VSCALE_LO,
 369                                         scale->vscale & 0x00FF);
 370
 371         return ret;
 372 }
 373
 374 static int tw9910_set_hsync(struct i2c_client *client)
 375 {
 376         struct tw9910_priv *priv = to_tw9910(client);
 377         int ret;
 378
 379         /* bit 10 - 3 */
 380         ret = i2c_smbus_write_byte_data(client, HSBEGIN,
 381                                         (HSYNC_START & 0x07F8) >> 3);
 382         if (ret < 0)
 383                 return ret;
 384
 385         /* bit 10 - 3 */
 386         ret = i2c_smbus_write_byte_data(client, HSEND,
 387                                         (HSYNC_END & 0x07F8) >> 3);
 388         if (ret < 0)
 389                 return ret;
 390
 391         /* So far only revisions 0 and 1 have been seen. */
 392         /* bit 2 - 0 */
 393         if (priv->revision == 1)
 394                 ret = tw9910_mask_set(client, HSLOWCTL, 0x77,
 395                                       (HSYNC_START & 0x0007) << 4 |
 396                                       (HSYNC_END   & 0x0007));
 397
 398         return ret;
 399 }
 400
 401 static void tw9910_reset(struct i2c_client *client)
 402 {
 403         tw9910_mask_set(client, ACNTL1, SRESET, SRESET);
 404         usleep_range(1000, 5000);
 405 }
 406
 407 static int tw9910_power(struct i2c_client *client, int enable)
 408 {
 409         int ret;
 410         u8 acntl1;
 411         u8 acntl2;
 412
 413         if (enable) {
 414                 acntl1 = 0;
 415                 acntl2 = 0;
 416         } else {
 417                 acntl1 = CLK_PDN | Y_PDN | C_PDN;
 418                 acntl2 = PLL_PDN;
 419         }
 420
 421         ret = tw9910_mask_set(client, ACNTL1, ACNTL1_PDN_MASK, acntl1);
 422         if (ret < 0)
 423                 return ret;
 424
 425         return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2);
 426 }
 427
 428 static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm,
 429                                                           u32 width, u32 height)
 430 {
 431         const struct tw9910_scale_ctrl *scale;
 432         const struct tw9910_scale_ctrl *ret = NULL;
 433         __u32 diff = 0xffffffff, tmp;
 434         int size, i;
 435
 436         if (norm & V4L2_STD_NTSC) {
 437                 scale = tw9910_ntsc_scales;
 438                 size = ARRAY_SIZE(tw9910_ntsc_scales);
 439         } else if (norm & V4L2_STD_PAL) {
 440                 scale = tw9910_pal_scales;
 441                 size = ARRAY_SIZE(tw9910_pal_scales);
 442         } else {
 443                 return NULL;
 444         }
 445
 446         for (i = 0; i < size; i++) {
 447                 tmp = abs(width - scale[i].width) +
 448                       abs(height - scale[i].height);
 449                 if (tmp < diff) {
 450                         diff = tmp;
 451                         ret = scale + i;
 452                 }
 453         }
 454
 455         return ret;
 456 }
 457
 458 /*
 459  * subdevice operations
 460  */
 461 static int tw9910_s_stream(struct v4l2_subdev *sd, int enable)
 462 {
 463         struct i2c_client *client = v4l2_get_subdevdata(sd);
 464         struct tw9910_priv *priv = to_tw9910(client);
 465         u8 val;
 466         int ret;
 467
 468         if (!enable) {
 469                 switch (priv->revision) {
 470                 case 0:
 471                         val = OEN_TRI_SEL_ALL_OFF_r0;
 472                         break;
 473                 case 1:
 474                         val = OEN_TRI_SEL_ALL_OFF_r1;
 475                         break;
 476                 default:
 477                         dev_err(&client->dev, "un-supported revision\n");
 478                         return -EINVAL;
 479                 }
 480         } else {
 481                 val = OEN_TRI_SEL_ALL_ON;
 482
 483                 if (!priv->scale) {
 484                         dev_err(&client->dev, "norm select error\n");
 485                         return -EPERM;
 486                 }
 487
 488                 dev_dbg(&client->dev, "%s %dx%d\n",
 489                         priv->scale->name,
 490                         priv->scale->width,
 491                         priv->scale->height);
 492         }
 493
 494         ret = tw9910_mask_set(client, OPFORM, OEN_TRI_SEL_MASK, val);
 495         if (ret < 0)
 496                 return ret;
 497
 498         return tw9910_power(client, enable);
 499 }
 500
 501 static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
 502 {
 503         struct i2c_client *client = v4l2_get_subdevdata(sd);
 504         struct tw9910_priv *priv = to_tw9910(client);
 505
 506         *norm = priv->norm;
 507
 508         return 0;
 509 }
 510
 511 static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
 512 {
 513         struct i2c_client *client = v4l2_get_subdevdata(sd);
 514         struct tw9910_priv *priv = to_tw9910(client);
 515         const unsigned int hact = 720;
 516         const unsigned int hdelay = 15;
 517         unsigned int vact;
 518         unsigned int vdelay;
 519         int ret;
 520
 521         if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL)))
 522                 return -EINVAL;
 523
 524         priv->norm = norm;
 525         if (norm & V4L2_STD_525_60) {
 526                 vact = 240;
 527                 vdelay = 18;
 528                 ret = tw9910_mask_set(client, VVBI, 0x10, 0x10);
 529         } else {
 530                 vact = 288;
 531                 vdelay = 24;
 532                 ret = tw9910_mask_set(client, VVBI, 0x10, 0x00);
 533         }
 534         if (!ret)
 535                 ret = i2c_smbus_write_byte_data(client, CROP_HI,
 536                                                 ((vdelay >> 2) & 0xc0)  |
 537                                                 ((vact >> 4) & 0x30)    |
 538                                                 ((hdelay >> 6) & 0x0c)  |
 539                                                 ((hact >> 8) & 0x03));
 540         if (!ret)
 541                 ret = i2c_smbus_write_byte_data(client, VDELAY_LO,
 542                                                 vdelay & 0xff);
 543         if (!ret)
 544                 ret = i2c_smbus_write_byte_data(client, VACTIVE_LO,
 545                                                 vact & 0xff);
 546
 547         return ret;
 548 }
 549
 550 #ifdef CONFIG_VIDEO_ADV_DEBUG
 551 static int tw9910_g_register(struct v4l2_subdev *sd,
 552                              struct v4l2_dbg_register *reg)
 553 {
 554         struct i2c_client *client = v4l2_get_subdevdata(sd);
 555         int ret;
 556
 557         if (reg->reg > 0xff)
 558                 return -EINVAL;
 559
 560         reg->size = 1;
 561         ret = i2c_smbus_read_byte_data(client, reg->reg);
 562         if (ret < 0)
 563                 return ret;
 564
 565         /*
 566          * ret      = int
 567          * reg->val = __u64
 568          */
 569         reg->val = (__u64)ret;
 570
 571         return 0;
 572 }
 573
 574 static int tw9910_s_register(struct v4l2_subdev *sd,
 575                              const struct v4l2_dbg_register *reg)
 576 {
 577         struct i2c_client *client = v4l2_get_subdevdata(sd);
 578
 579         if (reg->reg > 0xff ||
 580             reg->val > 0xff)
 581                 return -EINVAL;
 582
 583         return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
 584 }
 585 #endif
 586
 587 static void tw9910_set_gpio_value(struct gpio_desc *desc, int value)
 588 {
 589         if (desc) {
 590                 gpiod_set_value(desc, value);
 591                 usleep_range(500, 1000);
 592         }
 593 }
 594
 595 static int tw9910_power_on(struct tw9910_priv *priv)
 596 {
 597         struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
 598         int ret;
 599
 600         if (priv->clk) {
 601                 ret = clk_prepare_enable(priv->clk);
 602                 if (ret)
 603                         return ret;
 604         }
 605
 606         tw9910_set_gpio_value(priv->pdn_gpio, 0);
 607
 608         /*
 609          * FIXME: The reset signal is connected to a shared GPIO on some
 610          * platforms (namely the SuperH Migo-R). Until a framework becomes
 611          * available to handle this cleanly, request the GPIO temporarily
 612          * to avoid conflicts.
 613          */
 614         priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
 615                                              GPIOD_OUT_LOW);
 616         if (IS_ERR(priv->rstb_gpio)) {
 617                 dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
 618                 clk_disable_unprepare(priv->clk);
 619                 tw9910_set_gpio_value(priv->pdn_gpio, 1);
 620                 return PTR_ERR(priv->rstb_gpio);
 621         }
 622
 623         if (priv->rstb_gpio) {
 624                 tw9910_set_gpio_value(priv->rstb_gpio, 1);
 625                 tw9910_set_gpio_value(priv->rstb_gpio, 0);
 626
 627                 gpiod_put(priv->rstb_gpio);
 628         }
 629
 630         return 0;
 631 }
 632
 633 static int tw9910_power_off(struct tw9910_priv *priv)
 634 {
 635         clk_disable_unprepare(priv->clk);
 636         tw9910_set_gpio_value(priv->pdn_gpio, 1);
 637
 638         return 0;
 639 }
 640
 641 static int tw9910_s_power(struct v4l2_subdev *sd, int on)
 642 {
 643         struct i2c_client *client = v4l2_get_subdevdata(sd);
 644         struct tw9910_priv *priv = to_tw9910(client);
 645
 646         return on ? tw9910_power_on(priv) : tw9910_power_off(priv);
 647 }
 648
 649 static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
 650 {
 651         struct i2c_client *client = v4l2_get_subdevdata(sd);
 652         struct tw9910_priv *priv = to_tw9910(client);
 653         int ret = -EINVAL;
 654         u8 val;
 655
 656         /* Select suitable norm. */
 657         priv->scale = tw9910_select_norm(priv->norm, *width, *height);
 658         if (!priv->scale)
 659                 goto tw9910_set_fmt_error;
 660
 661         /* Reset hardware. */
 662         tw9910_reset(client);
 663
 664         /* Set bus width. */
 665         val = 0x00;
 666         if (priv->info->buswidth == 16)
 667                 val = LEN;
 668
 669         ret = tw9910_mask_set(client, OPFORM, LEN, val);
 670         if (ret < 0)
 671                 goto tw9910_set_fmt_error;
 672
 673         /* Select MPOUT behavior. */
 674         switch (priv->info->mpout) {
 675         case TW9910_MPO_VLOSS:
 676                 val = RTSEL_VLOSS; break;
 677         case TW9910_MPO_HLOCK:
 678                 val = RTSEL_HLOCK; break;
 679         case TW9910_MPO_SLOCK:
 680                 val = RTSEL_SLOCK; break;
 681         case TW9910_MPO_VLOCK:
 682                 val = RTSEL_VLOCK; break;
 683         case TW9910_MPO_MONO:
 684                 val = RTSEL_MONO;  break;
 685         case TW9910_MPO_DET50:
 686                 val = RTSEL_DET50; break;
 687         case TW9910_MPO_FIELD:
 688                 val = RTSEL_FIELD; break;
 689         case TW9910_MPO_RTCO:
 690                 val = RTSEL_RTCO;  break;
 691         default:
 692                 val = 0;
 693         }
 694
 695         ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val);
 696         if (ret < 0)
 697                 goto tw9910_set_fmt_error;
 698
 699         /* Set scale. */
 700         ret = tw9910_set_scale(client, priv->scale);
 701         if (ret < 0)
 702                 goto tw9910_set_fmt_error;
 703
 704         /* Set hsync. */
 705         ret = tw9910_set_hsync(client);
 706         if (ret < 0)
 707                 goto tw9910_set_fmt_error;
 708
 709         *width = priv->scale->width;
 710         *height = priv->scale->height;
 711
 712         return ret;
 713
 714 tw9910_set_fmt_error:
 715
 716         tw9910_reset(client);
 717         priv->scale = NULL;
 718
 719         return ret;
 720 }
 721
 722 static int tw9910_get_selection(struct v4l2_subdev *sd,
 723                                 struct v4l2_subdev_state *sd_state,
 724                                 struct v4l2_subdev_selection *sel)
 725 {
 726         struct i2c_client *client = v4l2_get_subdevdata(sd);
 727         struct tw9910_priv *priv = to_tw9910(client);
 728
 729         if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
 730                 return -EINVAL;
 731         /* Only CROP, CROP_DEFAULT and CROP_BOUNDS are supported. */
 732         if (sel->target > V4L2_SEL_TGT_CROP_BOUNDS)
 733                 return -EINVAL;
 734
 735         sel->r.left     = 0;
 736         sel->r.top      = 0;
 737         if (priv->norm & V4L2_STD_NTSC) {
 738                 sel->r.width    = 640;
 739                 sel->r.height   = 480;
 740         } else {
 741                 sel->r.width    = 768;
 742                 sel->r.height   = 576;
 743         }
 744
 745         return 0;
 746 }
 747
 748 static int tw9910_get_fmt(struct v4l2_subdev *sd,
 749                           struct v4l2_subdev_state *sd_state,
 750                           struct v4l2_subdev_format *format)
 751 {
 752         struct v4l2_mbus_framefmt *mf = &format->format;
 753         struct i2c_client *client = v4l2_get_subdevdata(sd);
 754         struct tw9910_priv *priv = to_tw9910(client);
 755
 756         if (format->pad)
 757                 return -EINVAL;
 758
 759         if (!priv->scale) {
 760                 priv->scale = tw9910_select_norm(priv->norm, 640, 480);
 761                 if (!priv->scale)
 762                         return -EINVAL;
 763         }
 764
 765         mf->width       = priv->scale->width;
 766         mf->height      = priv->scale->height;
 767         mf->code        = MEDIA_BUS_FMT_UYVY8_2X8;
 768         mf->colorspace  = V4L2_COLORSPACE_SMPTE170M;
 769         mf->field       = V4L2_FIELD_INTERLACED_BT;
 770
 771         return 0;
 772 }
 773
 774 static int tw9910_s_fmt(struct v4l2_subdev *sd,
 775                         struct v4l2_mbus_framefmt *mf)
 776 {
 777         u32 width = mf->width, height = mf->height;
 778         int ret;
 779
 780         WARN_ON(mf->field != V4L2_FIELD_ANY &&
 781                 mf->field != V4L2_FIELD_INTERLACED_BT);
 782
 783         /* Check color format. */
 784         if (mf->code != MEDIA_BUS_FMT_UYVY8_2X8)
 785                 return -EINVAL;
 786
 787         mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
 788
 789         ret = tw9910_set_frame(sd, &width, &height);
 790         if (ret)
 791                 return ret;
 792
 793         mf->width       = width;
 794         mf->height      = height;
 795
 796         return 0;
 797 }
 798
 799 static int tw9910_set_fmt(struct v4l2_subdev *sd,
 800                           struct v4l2_subdev_state *sd_state,
 801                           struct v4l2_subdev_format *format)
 802 {
 803         struct v4l2_mbus_framefmt *mf = &format->format;
 804         struct i2c_client *client = v4l2_get_subdevdata(sd);
 805         struct tw9910_priv *priv = to_tw9910(client);
 806         const struct tw9910_scale_ctrl *scale;
 807
 808         if (format->pad)
 809                 return -EINVAL;
 810
 811         if (mf->field == V4L2_FIELD_ANY) {
 812                 mf->field = V4L2_FIELD_INTERLACED_BT;
 813         } else if (mf->field != V4L2_FIELD_INTERLACED_BT) {
 814                 dev_err(&client->dev, "Field type %d invalid\n", mf->field);
 815                 return -EINVAL;
 816         }
 817
 818         mf->code = MEDIA_BUS_FMT_UYVY8_2X8;
 819         mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
 820
 821         /* Select suitable norm. */
 822         scale = tw9910_select_norm(priv->norm, mf->width, mf->height);
 823         if (!scale)
 824                 return -EINVAL;
 825
 826         mf->width       = scale->width;
 827         mf->height      = scale->height;
 828
 829         if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
 830                 return tw9910_s_fmt(sd, mf);
 831
 832         sd_state->pads->try_fmt = *mf;
 833
 834         return 0;
 835 }
 836
 837 static int tw9910_video_probe(struct i2c_client *client)
 838 {
 839         struct tw9910_priv *priv = to_tw9910(client);
 840         s32 id;
 841         int ret;
 842
 843         /* TW9910 only use 8 or 16 bit bus width. */
 844         if (priv->info->buswidth != 16 && priv->info->buswidth != 8) {
 845                 dev_err(&client->dev, "bus width error\n");
 846                 return -ENODEV;
 847         }
 848
 849         ret = tw9910_s_power(&priv->subdev, 1);
 850         if (ret < 0)
 851                 return ret;
 852
 853         /*
 854          * Check and show Product ID.
 855          * So far only revisions 0 and 1 have been seen.
 856          */
 857         id = i2c_smbus_read_byte_data(client, ID);
 858         priv->revision = GET_REV(id);
 859         id = GET_ID(id);
 860
 861         if (id != 0x0b || priv->revision > 0x01) {
 862                 dev_err(&client->dev, "Product ID error %x:%x\n",
 863                         id, priv->revision);
 864                 ret = -ENODEV;
 865                 goto done;
 866         }
 867
 868         dev_info(&client->dev, "tw9910 Product ID %0x:%0x\n",
 869                  id, priv->revision);
 870
 871         priv->norm = V4L2_STD_NTSC;
 872         priv->scale = &tw9910_ntsc_scales[0];
 873
 874 done:
 875         tw9910_s_power(&priv->subdev, 0);
 876
 877         return ret;
 878 }
 879
 880 static const struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
 881 #ifdef CONFIG_VIDEO_ADV_DEBUG
 882         .g_register     = tw9910_g_register,
 883         .s_register     = tw9910_s_register,
 884 #endif
 885         .s_power        = tw9910_s_power,
 886 };
 887
 888 static int tw9910_enum_mbus_code(struct v4l2_subdev *sd,
 889                                  struct v4l2_subdev_state *sd_state,
 890                                  struct v4l2_subdev_mbus_code_enum *code)
 891 {
 892         if (code->pad || code->index)
 893                 return -EINVAL;
 894
 895         code->code = MEDIA_BUS_FMT_UYVY8_2X8;
 896
 897         return 0;
 898 }
 899
 900 static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm)
 901 {
 902         *norm = V4L2_STD_NTSC | V4L2_STD_PAL;
 903
 904         return 0;
 905 }
 906
 907 static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
 908         .s_std          = tw9910_s_std,
 909         .g_std          = tw9910_g_std,
 910         .s_stream       = tw9910_s_stream,
 911         .g_tvnorms      = tw9910_g_tvnorms,
 912 };
 913
 914 static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = {
 915         .enum_mbus_code = tw9910_enum_mbus_code,
 916         .get_selection  = tw9910_get_selection,
 917         .get_fmt        = tw9910_get_fmt,
 918         .set_fmt        = tw9910_set_fmt,
 919 };
 920
 921 static const struct v4l2_subdev_ops tw9910_subdev_ops = {
 922         .core   = &tw9910_subdev_core_ops,
 923         .video  = &tw9910_subdev_video_ops,
 924         .pad    = &tw9910_subdev_pad_ops,
 925 };
 926
 927 /*
 928  * i2c_driver function
 929  */
 930
 931 static int tw9910_probe(struct i2c_client *client,
 932                         const struct i2c_device_id *did)
 933
 934 {
 935         struct tw9910_priv              *priv;
 936         struct tw9910_video_info        *info;
 937         struct i2c_adapter              *adapter = client->adapter;
 938         int ret;
 939
 940         if (!client->dev.platform_data) {
 941                 dev_err(&client->dev, "TW9910: missing platform data!\n");
 942                 return -EINVAL;
 943         }
 944
 945         info = client->dev.platform_data;
 946
 947         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 948                 dev_err(&client->dev,
 949                         "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n");
 950                 return -EIO;
 951         }
 952
 953         priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
 954         if (!priv)
 955                 return -ENOMEM;
 956
 957         priv->info = info;
 958
 959         v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
 960
 961         priv->clk = clk_get(&client->dev, "xti");
 962         if (PTR_ERR(priv->clk) == -ENOENT) {
 963                 priv->clk = NULL;
 964         } else if (IS_ERR(priv->clk)) {
 965                 dev_err(&client->dev, "Unable to get xti clock\n");
 966                 return PTR_ERR(priv->clk);
 967         }
 968
 969         priv->pdn_gpio = gpiod_get_optional(&client->dev, "pdn",
 970                                             GPIOD_OUT_HIGH);
 971         if (IS_ERR(priv->pdn_gpio)) {
 972                 dev_info(&client->dev, "Unable to get GPIO \"pdn\"");
 973                 ret = PTR_ERR(priv->pdn_gpio);
 974                 goto error_clk_put;
 975         }
 976
 977         ret = tw9910_video_probe(client);
 978         if (ret < 0)
 979                 goto error_gpio_put;
 980
 981         ret = v4l2_async_register_subdev(&priv->subdev);
 982         if (ret)
 983                 goto error_gpio_put;
 984
 985         return ret;
 986
 987 error_gpio_put:
 988         if (priv->pdn_gpio)
 989                 gpiod_put(priv->pdn_gpio);
 990 error_clk_put:
 991         clk_put(priv->clk);
 992
 993         return ret;
 994 }
 995
 996 static int tw9910_remove(struct i2c_client *client)
 997 {
 998         struct tw9910_priv *priv = to_tw9910(client);
 999
1000         if (priv->pdn_gpio)
1001                 gpiod_put(priv->pdn_gpio);
1002         clk_put(priv->clk);
1003         v4l2_async_unregister_subdev(&priv->subdev);
1004
1005         return 0;
1006 }
1007
1008 static const struct i2c_device_id tw9910_id[] = {
1009         { "tw9910", 0 },
1010         { }
1011 };
1012 MODULE_DEVICE_TABLE(i2c, tw9910_id);
1013
1014 static struct i2c_driver tw9910_i2c_driver = {
1015         .driver = {
1016                 .name = "tw9910",
1017         },
1018         .probe    = tw9910_probe,
1019         .remove   = tw9910_remove,
1020         .id_table = tw9910_id,
1021 };
1022
1023 module_i2c_driver(tw9910_i2c_driver);
1024
1025 MODULE_DESCRIPTION("V4L2 driver for TW9910 video decoder");
1026 MODULE_AUTHOR("Kuninori Morimoto");
1027 MODULE_LICENSE("GPL v2");