]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/media/pci/cx18/cx18-av-audio.c
Merge branches 'for-4.11/upstream-fixes', 'for-4.12/accutouch', 'for-4.12/cp2112...
[mirror_ubuntu-artful-kernel.git] / drivers / media / pci / cx18 / cx18-av-audio.c
1 /*
2 * cx18 ADEC audio functions
3 *
4 * Derived from cx25840-audio.c
5 *
6 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
7 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20 #include "cx18-driver.h"
21
22 static int set_audclk_freq(struct cx18 *cx, u32 freq)
23 {
24 struct cx18_av_state *state = &cx->av_state;
25
26 if (freq != 32000 && freq != 44100 && freq != 48000)
27 return -EINVAL;
28
29 /*
30 * The PLL parameters are based on the external crystal frequency that
31 * would ideally be:
32 *
33 * NTSC Color subcarrier freq * 8 =
34 * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
35 *
36 * The accidents of history and rationale that explain from where this
37 * combination of magic numbers originate can be found in:
38 *
39 * [1] Abrahams, I. C., "Choice of Chrominance Subcarrier Frequency in
40 * the NTSC Standards", Proceedings of the I-R-E, January 1954, pp 79-80
41 *
42 * [2] Abrahams, I. C., "The 'Frequency Interleaving' Principle in the
43 * NTSC Standards", Proceedings of the I-R-E, January 1954, pp 81-83
44 *
45 * As Mike Bradley has rightly pointed out, it's not the exact crystal
46 * frequency that matters, only that all parts of the driver and
47 * firmware are using the same value (close to the ideal value).
48 *
49 * Since I have a strong suspicion that, if the firmware ever assumes a
50 * crystal value at all, it will assume 28.636360 MHz, the crystal
51 * freq used in calculations in this driver will be:
52 *
53 * xtal_freq = 28.636360 MHz
54 *
55 * an error of less than 0.13 ppm which is way, way better than any off
56 * the shelf crystal will have for accuracy anyway.
57 *
58 * Below I aim to run the PLLs' VCOs near 400 MHz to minimze error.
59 *
60 * Many thanks to Jeff Campbell and Mike Bradley for their extensive
61 * investigation, experimentation, testing, and suggested solutions of
62 * of audio/video sync problems with SVideo and CVBS captures.
63 */
64
65 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
66 switch (freq) {
67 case 32000:
68 /*
69 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
70 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20
71 */
72 cx18_av_write4(cx, 0x108, 0x200d040f);
73
74 /* VID_PLL Fraction = 0x2be2fe */
75 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
76 cx18_av_write4(cx, 0x10c, 0x002be2fe);
77
78 /* AUX_PLL Fraction = 0x176740c */
79 /* xtal * 0xd.bb3a060/0x20 = 32000 * 384: 393 MHz p-pd*/
80 cx18_av_write4(cx, 0x110, 0x0176740c);
81
82 /* src3/4/6_ctl */
83 /* 0x1.f77f = (4 * xtal/8*2/455) / 32000 */
84 cx18_av_write4(cx, 0x900, 0x0801f77f);
85 cx18_av_write4(cx, 0x904, 0x0801f77f);
86 cx18_av_write4(cx, 0x90c, 0x0801f77f);
87
88 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */
89 cx18_av_write(cx, 0x127, 0x60);
90
91 /* AUD_COUNT = 0x2fff = 8 samples * 4 * 384 - 1 */
92 cx18_av_write4(cx, 0x12c, 0x11202fff);
93
94 /*
95 * EN_AV_LOCK = 0
96 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
97 * ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
98 */
99 cx18_av_write4(cx, 0x128, 0xa00d2ef8);
100 break;
101
102 case 44100:
103 /*
104 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
105 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x18
106 */
107 cx18_av_write4(cx, 0x108, 0x180e040f);
108
109 /* VID_PLL Fraction = 0x2be2fe */
110 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
111 cx18_av_write4(cx, 0x10c, 0x002be2fe);
112
113 /* AUX_PLL Fraction = 0x062a1f2 */
114 /* xtal * 0xe.3150f90/0x18 = 44100 * 384: 406 MHz p-pd*/
115 cx18_av_write4(cx, 0x110, 0x0062a1f2);
116
117 /* src3/4/6_ctl */
118 /* 0x1.6d59 = (4 * xtal/8*2/455) / 44100 */
119 cx18_av_write4(cx, 0x900, 0x08016d59);
120 cx18_av_write4(cx, 0x904, 0x08016d59);
121 cx18_av_write4(cx, 0x90c, 0x08016d59);
122
123 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x18 */
124 cx18_av_write(cx, 0x127, 0x58);
125
126 /* AUD_COUNT = 0x92ff = 49 samples * 2 * 384 - 1 */
127 cx18_av_write4(cx, 0x12c, 0x112092ff);
128
129 /*
130 * EN_AV_LOCK = 0
131 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
132 * ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
133 */
134 cx18_av_write4(cx, 0x128, 0xa01d4bf8);
135 break;
136
137 case 48000:
138 /*
139 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
140 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x16
141 */
142 cx18_av_write4(cx, 0x108, 0x160e040f);
143
144 /* VID_PLL Fraction = 0x2be2fe */
145 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
146 cx18_av_write4(cx, 0x10c, 0x002be2fe);
147
148 /* AUX_PLL Fraction = 0x05227ad */
149 /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz p-pd*/
150 cx18_av_write4(cx, 0x110, 0x005227ad);
151
152 /* src3/4/6_ctl */
153 /* 0x1.4faa = (4 * xtal/8*2/455) / 48000 */
154 cx18_av_write4(cx, 0x900, 0x08014faa);
155 cx18_av_write4(cx, 0x904, 0x08014faa);
156 cx18_av_write4(cx, 0x90c, 0x08014faa);
157
158 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
159 cx18_av_write(cx, 0x127, 0x56);
160
161 /* AUD_COUNT = 0x5fff = 4 samples * 16 * 384 - 1 */
162 cx18_av_write4(cx, 0x12c, 0x11205fff);
163
164 /*
165 * EN_AV_LOCK = 0
166 * VID_COUNT = 0x1193f8 = 143999.000 * 8 =
167 * ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
168 */
169 cx18_av_write4(cx, 0x128, 0xa01193f8);
170 break;
171 }
172 } else {
173 switch (freq) {
174 case 32000:
175 /*
176 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
177 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x30
178 */
179 cx18_av_write4(cx, 0x108, 0x300d040f);
180
181 /* VID_PLL Fraction = 0x2be2fe */
182 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
183 cx18_av_write4(cx, 0x10c, 0x002be2fe);
184
185 /* AUX_PLL Fraction = 0x176740c */
186 /* xtal * 0xd.bb3a060/0x30 = 32000 * 256: 393 MHz p-pd*/
187 cx18_av_write4(cx, 0x110, 0x0176740c);
188
189 /* src1_ctl */
190 /* 0x1.0000 = 32000/32000 */
191 cx18_av_write4(cx, 0x8f8, 0x08010000);
192
193 /* src3/4/6_ctl */
194 /* 0x2.0000 = 2 * (32000/32000) */
195 cx18_av_write4(cx, 0x900, 0x08020000);
196 cx18_av_write4(cx, 0x904, 0x08020000);
197 cx18_av_write4(cx, 0x90c, 0x08020000);
198
199 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x30 */
200 cx18_av_write(cx, 0x127, 0x70);
201
202 /* AUD_COUNT = 0x1fff = 8 samples * 4 * 256 - 1 */
203 cx18_av_write4(cx, 0x12c, 0x11201fff);
204
205 /*
206 * EN_AV_LOCK = 0
207 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
208 * ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
209 */
210 cx18_av_write4(cx, 0x128, 0xa00d2ef8);
211 break;
212
213 case 44100:
214 /*
215 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
216 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x24
217 */
218 cx18_av_write4(cx, 0x108, 0x240e040f);
219
220 /* VID_PLL Fraction = 0x2be2fe */
221 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
222 cx18_av_write4(cx, 0x10c, 0x002be2fe);
223
224 /* AUX_PLL Fraction = 0x062a1f2 */
225 /* xtal * 0xe.3150f90/0x24 = 44100 * 256: 406 MHz p-pd*/
226 cx18_av_write4(cx, 0x110, 0x0062a1f2);
227
228 /* src1_ctl */
229 /* 0x1.60cd = 44100/32000 */
230 cx18_av_write4(cx, 0x8f8, 0x080160cd);
231
232 /* src3/4/6_ctl */
233 /* 0x1.7385 = 2 * (32000/44100) */
234 cx18_av_write4(cx, 0x900, 0x08017385);
235 cx18_av_write4(cx, 0x904, 0x08017385);
236 cx18_av_write4(cx, 0x90c, 0x08017385);
237
238 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x24 */
239 cx18_av_write(cx, 0x127, 0x64);
240
241 /* AUD_COUNT = 0x61ff = 49 samples * 2 * 256 - 1 */
242 cx18_av_write4(cx, 0x12c, 0x112061ff);
243
244 /*
245 * EN_AV_LOCK = 0
246 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
247 * ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
248 */
249 cx18_av_write4(cx, 0x128, 0xa01d4bf8);
250 break;
251
252 case 48000:
253 /*
254 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
255 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20
256 */
257 cx18_av_write4(cx, 0x108, 0x200d040f);
258
259 /* VID_PLL Fraction = 0x2be2fe */
260 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
261 cx18_av_write4(cx, 0x10c, 0x002be2fe);
262
263 /* AUX_PLL Fraction = 0x176740c */
264 /* xtal * 0xd.bb3a060/0x20 = 48000 * 256: 393 MHz p-pd*/
265 cx18_av_write4(cx, 0x110, 0x0176740c);
266
267 /* src1_ctl */
268 /* 0x1.8000 = 48000/32000 */
269 cx18_av_write4(cx, 0x8f8, 0x08018000);
270
271 /* src3/4/6_ctl */
272 /* 0x1.5555 = 2 * (32000/48000) */
273 cx18_av_write4(cx, 0x900, 0x08015555);
274 cx18_av_write4(cx, 0x904, 0x08015555);
275 cx18_av_write4(cx, 0x90c, 0x08015555);
276
277 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */
278 cx18_av_write(cx, 0x127, 0x60);
279
280 /* AUD_COUNT = 0x3fff = 4 samples * 16 * 256 - 1 */
281 cx18_av_write4(cx, 0x12c, 0x11203fff);
282
283 /*
284 * EN_AV_LOCK = 0
285 * VID_COUNT = 0x1193f8 = 143999.000 * 8 =
286 * ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
287 */
288 cx18_av_write4(cx, 0x128, 0xa01193f8);
289 break;
290 }
291 }
292
293 state->audclk_freq = freq;
294
295 return 0;
296 }
297
298 void cx18_av_audio_set_path(struct cx18 *cx)
299 {
300 struct cx18_av_state *state = &cx->av_state;
301 u8 v;
302
303 /* stop microcontroller */
304 v = cx18_av_read(cx, 0x803) & ~0x10;
305 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
306
307 /* assert soft reset */
308 v = cx18_av_read(cx, 0x810) | 0x01;
309 cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
310
311 /* Mute everything to prevent the PFFT! */
312 cx18_av_write(cx, 0x8d3, 0x1f);
313
314 if (state->aud_input <= CX18_AV_AUDIO_SERIAL2) {
315 /* Set Path1 to Serial Audio Input */
316 cx18_av_write4(cx, 0x8d0, 0x01011012);
317
318 /* The microcontroller should not be started for the
319 * non-tuner inputs: autodetection is specific for
320 * TV audio. */
321 } else {
322 /* Set Path1 to Analog Demod Main Channel */
323 cx18_av_write4(cx, 0x8d0, 0x1f063870);
324 }
325
326 set_audclk_freq(cx, state->audclk_freq);
327
328 /* deassert soft reset */
329 v = cx18_av_read(cx, 0x810) & ~0x01;
330 cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
331
332 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
333 /* When the microcontroller detects the
334 * audio format, it will unmute the lines */
335 v = cx18_av_read(cx, 0x803) | 0x10;
336 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
337 }
338 }
339
340 static void set_volume(struct cx18 *cx, int volume)
341 {
342 /* First convert the volume to msp3400 values (0-127) */
343 int vol = volume >> 9;
344 /* now scale it up to cx18_av values
345 * -114dB to -96dB maps to 0
346 * this should be 19, but in my testing that was 4dB too loud */
347 if (vol <= 23)
348 vol = 0;
349 else
350 vol -= 23;
351
352 /* PATH1_VOLUME */
353 cx18_av_write(cx, 0x8d4, 228 - (vol * 2));
354 }
355
356 static void set_bass(struct cx18 *cx, int bass)
357 {
358 /* PATH1_EQ_BASS_VOL */
359 cx18_av_and_or(cx, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff));
360 }
361
362 static void set_treble(struct cx18 *cx, int treble)
363 {
364 /* PATH1_EQ_TREBLE_VOL */
365 cx18_av_and_or(cx, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff));
366 }
367
368 static void set_balance(struct cx18 *cx, int balance)
369 {
370 int bal = balance >> 8;
371 if (bal > 0x80) {
372 /* PATH1_BAL_LEFT */
373 cx18_av_and_or(cx, 0x8d5, 0x7f, 0x80);
374 /* PATH1_BAL_LEVEL */
375 cx18_av_and_or(cx, 0x8d5, ~0x7f, bal & 0x7f);
376 } else {
377 /* PATH1_BAL_LEFT */
378 cx18_av_and_or(cx, 0x8d5, 0x7f, 0x00);
379 /* PATH1_BAL_LEVEL */
380 cx18_av_and_or(cx, 0x8d5, ~0x7f, 0x80 - bal);
381 }
382 }
383
384 static void set_mute(struct cx18 *cx, int mute)
385 {
386 struct cx18_av_state *state = &cx->av_state;
387 u8 v;
388
389 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
390 /* Must turn off microcontroller in order to mute sound.
391 * Not sure if this is the best method, but it does work.
392 * If the microcontroller is running, then it will undo any
393 * changes to the mute register. */
394 v = cx18_av_read(cx, 0x803);
395 if (mute) {
396 /* disable microcontroller */
397 v &= ~0x10;
398 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
399 cx18_av_write(cx, 0x8d3, 0x1f);
400 } else {
401 /* enable microcontroller */
402 v |= 0x10;
403 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
404 }
405 } else {
406 /* SRC1_MUTE_EN */
407 cx18_av_and_or(cx, 0x8d3, ~0x2, mute ? 0x02 : 0x00);
408 }
409 }
410
411 int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
412 {
413 struct cx18 *cx = v4l2_get_subdevdata(sd);
414 struct cx18_av_state *state = &cx->av_state;
415 int retval;
416 u8 v;
417
418 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
419 v = cx18_av_read(cx, 0x803) & ~0x10;
420 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
421 cx18_av_write(cx, 0x8d3, 0x1f);
422 }
423 v = cx18_av_read(cx, 0x810) | 0x1;
424 cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
425
426 retval = set_audclk_freq(cx, freq);
427
428 v = cx18_av_read(cx, 0x810) & ~0x1;
429 cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
430 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
431 v = cx18_av_read(cx, 0x803) | 0x10;
432 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
433 }
434 return retval;
435 }
436
437 static int cx18_av_audio_s_ctrl(struct v4l2_ctrl *ctrl)
438 {
439 struct v4l2_subdev *sd = to_sd(ctrl);
440 struct cx18 *cx = v4l2_get_subdevdata(sd);
441
442 switch (ctrl->id) {
443 case V4L2_CID_AUDIO_VOLUME:
444 set_volume(cx, ctrl->val);
445 break;
446 case V4L2_CID_AUDIO_BASS:
447 set_bass(cx, ctrl->val);
448 break;
449 case V4L2_CID_AUDIO_TREBLE:
450 set_treble(cx, ctrl->val);
451 break;
452 case V4L2_CID_AUDIO_BALANCE:
453 set_balance(cx, ctrl->val);
454 break;
455 case V4L2_CID_AUDIO_MUTE:
456 set_mute(cx, ctrl->val);
457 break;
458 default:
459 return -EINVAL;
460 }
461 return 0;
462 }
463
464 const struct v4l2_ctrl_ops cx18_av_audio_ctrl_ops = {
465 .s_ctrl = cx18_av_audio_s_ctrl,
466 };