]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/media/pci/cx18/cx18-cards.h
HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch
[mirror_ubuntu-artful-kernel.git] / drivers / media / pci / cx18 / cx18-cards.h
1 /*
2 * cx18 functions to query card hardware
3 *
4 * Derived from ivtv-cards.c
5 *
6 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
7 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24 /* hardware flags */
25 #define CX18_HW_TUNER (1 << 0)
26 #define CX18_HW_TVEEPROM (1 << 1)
27 #define CX18_HW_CS5345 (1 << 2)
28 #define CX18_HW_DVB (1 << 3)
29 #define CX18_HW_418_AV (1 << 4)
30 #define CX18_HW_GPIO_MUX (1 << 5)
31 #define CX18_HW_GPIO_RESET_CTRL (1 << 6)
32 #define CX18_HW_Z8F0811_IR_TX_HAUP (1 << 7)
33 #define CX18_HW_Z8F0811_IR_RX_HAUP (1 << 8)
34 #define CX18_HW_Z8F0811_IR_HAUP (CX18_HW_Z8F0811_IR_RX_HAUP | \
35 CX18_HW_Z8F0811_IR_TX_HAUP)
36
37 #define CX18_HW_IR_ANY (CX18_HW_Z8F0811_IR_RX_HAUP | \
38 CX18_HW_Z8F0811_IR_TX_HAUP)
39
40 /* video inputs */
41 #define CX18_CARD_INPUT_VID_TUNER 1
42 #define CX18_CARD_INPUT_SVIDEO1 2
43 #define CX18_CARD_INPUT_SVIDEO2 3
44 #define CX18_CARD_INPUT_COMPOSITE1 4
45 #define CX18_CARD_INPUT_COMPOSITE2 5
46 #define CX18_CARD_INPUT_COMPONENT1 6
47
48 /* audio inputs */
49 #define CX18_CARD_INPUT_AUD_TUNER 1
50 #define CX18_CARD_INPUT_LINE_IN1 2
51 #define CX18_CARD_INPUT_LINE_IN2 3
52
53 #define CX18_CARD_MAX_VIDEO_INPUTS 6
54 #define CX18_CARD_MAX_AUDIO_INPUTS 3
55 #define CX18_CARD_MAX_TUNERS 2
56
57 /* V4L2 capability aliases */
58 #define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \
59 V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | \
60 V4L2_CAP_STREAMING | V4L2_CAP_VBI_CAPTURE | \
61 V4L2_CAP_SLICED_VBI_CAPTURE)
62
63 struct cx18_card_video_input {
64 u8 video_type; /* video input type */
65 u8 audio_index; /* index in cx18_card_audio_input array */
66 u32 video_input; /* hardware video input */
67 };
68
69 struct cx18_card_audio_input {
70 u8 audio_type; /* audio input type */
71 u32 audio_input; /* hardware audio input */
72 u16 muxer_input; /* hardware muxer input for boards with a
73 multiplexer chip */
74 };
75
76 struct cx18_card_pci_info {
77 u16 device;
78 u16 subsystem_vendor;
79 u16 subsystem_device;
80 };
81
82 /* GPIO definitions */
83
84 /* The mask is the set of bits used by the operation */
85
86 struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */
87 u32 direction; /* DIR setting. Leave to 0 if no init is needed */
88 u32 initial_value;
89 };
90
91 struct cx18_gpio_i2c_slave_reset {
92 u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */
93 u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */
94 int msecs_asserted; /* time period reset must remain asserted */
95 int msecs_recovery; /* time after deassert for chips to be ready */
96 u32 ir_reset_mask; /* GPIO to reset the Zilog Z8F0811 IR contoller */
97 };
98
99 struct cx18_gpio_audio_input { /* select tuner/line in input */
100 u32 mask; /* leave to 0 if not supported */
101 u32 tuner;
102 u32 linein;
103 u32 radio;
104 };
105
106 struct cx18_card_tuner {
107 v4l2_std_id std; /* standard for which the tuner is suitable */
108 int tuner; /* tuner ID (from tuner.h) */
109 };
110
111 struct cx18_card_tuner_i2c {
112 unsigned short radio[2];/* radio tuner i2c address to probe */
113 unsigned short demod[3];/* demodulator i2c address to probe */
114 unsigned short tv[4]; /* tv tuner i2c addresses to probe */
115 };
116
117 struct cx18_ddr { /* DDR config data */
118 u32 chip_config;
119 u32 refresh;
120 u32 timing1;
121 u32 timing2;
122 u32 tune_lane;
123 u32 initial_emrs;
124 };
125
126 /* for card information/parameters */
127 struct cx18_card {
128 int type;
129 char *name;
130 char *comment;
131 u32 v4l2_capabilities;
132 u32 hw_audio_ctrl; /* hardware used for the V4L2 controls (only
133 1 dev allowed currently) */
134 u32 hw_muxer; /* hardware used to multiplex audio input */
135 u32 hw_all; /* all hardware used by the board */
136 struct cx18_card_video_input video_inputs[CX18_CARD_MAX_VIDEO_INPUTS];
137 struct cx18_card_audio_input audio_inputs[CX18_CARD_MAX_AUDIO_INPUTS];
138 struct cx18_card_audio_input radio_input;
139
140 /* GPIO card-specific settings */
141 u8 xceive_pin; /* XCeive tuner GPIO reset pin */
142 struct cx18_gpio_init gpio_init;
143 struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset;
144 struct cx18_gpio_audio_input gpio_audio_input;
145
146 struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS];
147 struct cx18_card_tuner_i2c *i2c;
148
149 struct cx18_ddr ddr;
150
151 /* list of device and subsystem vendor/devices that
152 correspond to this card type. */
153 const struct cx18_card_pci_info *pci_list;
154 };
155
156 int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input);
157 int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *input);
158 const struct cx18_card *cx18_get_card(u16 index);