drivers/media/platform/vsp1/vsp1_drm.c

   1 /*
   2  * vsp1_drm.c  --  R-Car VSP1 DRM API
   3  *
   4  * Copyright (C) 2015 Renesas Electronics Corporation
   5  *
   6  * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  */
  13
  14 #include <linux/device.h>
  15 #include <linux/slab.h>
  16
  17 #include <media/media-entity.h>
  18 #include <media/v4l2-subdev.h>
  19 #include <media/vsp1.h>
  20
  21 #include "vsp1.h"
  22 #include "vsp1_bru.h"
  23 #include "vsp1_dl.h"
  24 #include "vsp1_drm.h"
  25 #include "vsp1_lif.h"
  26 #include "vsp1_pipe.h"
  27 #include "vsp1_rwpf.h"
  28
  29
  30 /* -----------------------------------------------------------------------------
  31  * Interrupt Handling
  32  */
  33
  34 void vsp1_drm_display_start(struct vsp1_device *vsp1)
  35 {
  36         vsp1_dlm_irq_display_start(vsp1->drm->pipe.output->dlm);
  37 }
  38
  39 /* -----------------------------------------------------------------------------
  40  * DU Driver API
  41  */
  42
  43 int vsp1_du_init(struct device *dev)
  44 {
  45         struct vsp1_device *vsp1 = dev_get_drvdata(dev);
  46
  47         if (!vsp1)
  48                 return -EPROBE_DEFER;
  49
  50         return 0;
  51 }
  52 EXPORT_SYMBOL_GPL(vsp1_du_init);
  53
  54 /**
  55  * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
  56  * @dev: the VSP device
  57  * @width: output frame width in pixels
  58  * @height: output frame height in pixels
  59  *
  60  * Configure the output part of VSP DRM pipeline for the given frame @width and
  61  * @height. This sets up formats on the BRU source pad, the WPF0 sink and source
  62  * pads, and the LIF sink pad.
  63  *
  64  * As the media bus code on the BRU source pad is conditioned by the
  65  * configuration of the BRU sink 0 pad, we also set up the formats on all BRU
  66  * sinks, even if the configuration will be overwritten later by
  67  * vsp1_du_setup_rpf(). This ensures that the BRU configuration is set to a well
  68  * defined state.
  69  *
  70  * Return 0 on success or a negative error code on failure.
  71  */
  72 int vsp1_du_setup_lif(struct device *dev, unsigned int width,
  73                       unsigned int height)
  74 {
  75         struct vsp1_device *vsp1 = dev_get_drvdata(dev);
  76         struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
  77         struct vsp1_bru *bru = vsp1->bru;
  78         struct v4l2_subdev_format format;
  79         unsigned int i;
  80         int ret;
  81
  82         dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
  83                 __func__, width, height);
  84
  85         if (width == 0 || height == 0) {
  86                 /* Zero width or height means the CRTC is being disabled, stop
  87                  * the pipeline and turn the light off.
  88                  */
  89                 ret = vsp1_pipeline_stop(pipe);
  90                 if (ret == -ETIMEDOUT)
  91                         dev_err(vsp1->dev, "DRM pipeline stop timeout\n");
  92
  93                 media_entity_pipeline_stop(&pipe->output->entity.subdev.entity);
  94
  95                 for (i = 0; i < bru->entity.source_pad; ++i) {
  96                         vsp1->drm->inputs[i].enabled = false;
  97                         bru->inputs[i].rpf = NULL;
  98                         pipe->inputs[i] = NULL;
  99                 }
 100
 101                 pipe->num_inputs = 0;
 102
 103                 vsp1_dlm_reset(pipe->output->dlm);
 104                 vsp1_device_put(vsp1);
 105
 106                 dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__);
 107
 108                 return 0;
 109         }
 110
 111         /* Configure the format at the BRU sinks and propagate it through the
 112          * pipeline.
 113          */
 114         memset(&format, 0, sizeof(format));
 115         format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 116
 117         for (i = 0; i < bru->entity.source_pad; ++i) {
 118                 format.pad = i;
 119
 120                 format.format.width = width;
 121                 format.format.height = height;
 122                 format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
 123                 format.format.field = V4L2_FIELD_NONE;
 124
 125                 ret = v4l2_subdev_call(&bru->entity.subdev, pad,
 126                                        set_fmt, NULL, &format);
 127                 if (ret < 0)
 128                         return ret;
 129
 130                 dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
 131                         __func__, format.format.width, format.format.height,
 132                         format.format.code, i);
 133         }
 134
 135         format.pad = bru->entity.source_pad;
 136         format.format.width = width;
 137         format.format.height = height;
 138         format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
 139         format.format.field = V4L2_FIELD_NONE;
 140
 141         ret = v4l2_subdev_call(&bru->entity.subdev, pad, set_fmt, NULL,
 142                                &format);
 143         if (ret < 0)
 144                 return ret;
 145
 146         dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
 147                 __func__, format.format.width, format.format.height,
 148                 format.format.code, i);
 149
 150         format.pad = RWPF_PAD_SINK;
 151         ret = v4l2_subdev_call(&vsp1->wpf[0]->entity.subdev, pad, set_fmt, NULL,
 152                                &format);
 153         if (ret < 0)
 154                 return ret;
 155
 156         dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on WPF0 sink\n",
 157                 __func__, format.format.width, format.format.height,
 158                 format.format.code);
 159
 160         format.pad = RWPF_PAD_SOURCE;
 161         ret = v4l2_subdev_call(&vsp1->wpf[0]->entity.subdev, pad, get_fmt, NULL,
 162                                &format);
 163         if (ret < 0)
 164                 return ret;
 165
 166         dev_dbg(vsp1->dev, "%s: got format %ux%u (%x) on WPF0 source\n",
 167                 __func__, format.format.width, format.format.height,
 168                 format.format.code);
 169
 170         format.pad = LIF_PAD_SINK;
 171         ret = v4l2_subdev_call(&vsp1->lif->entity.subdev, pad, set_fmt, NULL,
 172                                &format);
 173         if (ret < 0)
 174                 return ret;
 175
 176         dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on LIF sink\n",
 177                 __func__, format.format.width, format.format.height,
 178                 format.format.code);
 179
 180         /* Verify that the format at the output of the pipeline matches the
 181          * requested frame size and media bus code.
 182          */
 183         if (format.format.width != width || format.format.height != height ||
 184             format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
 185                 dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
 186                 return -EPIPE;
 187         }
 188
 189         /* Mark the pipeline as streaming and enable the VSP1. This will store
 190          * the pipeline pointer in all entities, which the s_stream handlers
 191          * will need. We don't start the entities themselves right at this point
 192          * as there's no plane configured yet, so we can't start processing
 193          * buffers.
 194          */
 195         ret = vsp1_device_get(vsp1);
 196         if (ret < 0)
 197                 return ret;
 198
 199         ret = media_entity_pipeline_start(&pipe->output->entity.subdev.entity,
 200                                           &pipe->pipe);
 201         if (ret < 0) {
 202                 dev_dbg(vsp1->dev, "%s: pipeline start failed\n", __func__);
 203                 vsp1_device_put(vsp1);
 204                 return ret;
 205         }
 206
 207         dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__);
 208
 209         return 0;
 210 }
 211 EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
 212
 213 /**
 214  * vsp1_du_atomic_begin - Prepare for an atomic update
 215  * @dev: the VSP device
 216  */
 217 void vsp1_du_atomic_begin(struct device *dev)
 218 {
 219         struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 220         struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
 221
 222         vsp1->drm->num_inputs = pipe->num_inputs;
 223
 224         /* Prepare the display list. */
 225         pipe->dl = vsp1_dl_list_get(pipe->output->dlm);
 226 }
 227 EXPORT_SYMBOL_GPL(vsp1_du_atomic_begin);
 228
 229 /**
 230  * vsp1_du_atomic_update - Setup one RPF input of the VSP pipeline
 231  * @dev: the VSP device
 232  * @rpf_index: index of the RPF to setup (0-based)
 233  * @cfg: the RPF configuration
 234  *
 235  * Configure the VSP to perform image composition through RPF @rpf_index as
 236  * described by the @cfg configuration. The image to compose is referenced by
 237  * @cfg.mem and composed using the @cfg.src crop rectangle and the @cfg.dst
 238  * composition rectangle. The Z-order is configurable with higher @zpos values
 239  * displayed on top.
 240  *
 241  * If the @cfg configuration is NULL, the RPF will be disabled. Calling the
 242  * function on a disabled RPF is allowed.
 243  *
 244  * Image format as stored in memory is expressed as a V4L2 @cfg.pixelformat
 245  * value. The memory pitch is configurable to allow for padding at end of lines,
 246  * or simply for images that extend beyond the crop rectangle boundaries. The
 247  * @cfg.pitch value is expressed in bytes and applies to all planes for
 248  * multiplanar formats.
 249  *
 250  * The source memory buffer is referenced by the DMA address of its planes in
 251  * the @cfg.mem array. Up to two planes are supported. The second plane DMA
 252  * address is ignored for formats using a single plane.
 253  *
 254  * This function isn't reentrant, the caller needs to serialize calls.
 255  *
 256  * Return 0 on success or a negative error code on failure.
 257  */
 258 int vsp1_du_atomic_update(struct device *dev, unsigned int rpf_index,
 259                           const struct vsp1_du_atomic_config *cfg)
 260 {
 261         struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 262         const struct vsp1_format_info *fmtinfo;
 263         struct vsp1_rwpf *rpf;
 264
 265         if (rpf_index >= vsp1->info->rpf_count)
 266                 return -EINVAL;
 267
 268         rpf = vsp1->rpf[rpf_index];
 269
 270         if (!cfg) {
 271                 dev_dbg(vsp1->dev, "%s: RPF%u: disable requested\n", __func__,
 272                         rpf_index);
 273
 274                 vsp1->drm->inputs[rpf_index].enabled = false;
 275                 return 0;
 276         }
 277
 278         dev_dbg(vsp1->dev,
 279                 "%s: RPF%u: (%u,%u)/%ux%u -> (%u,%u)/%ux%u (%08x), pitch %u dma { %pad, %pad, %pad } zpos %u\n",
 280                 __func__, rpf_index,
 281                 cfg->src.left, cfg->src.top, cfg->src.width, cfg->src.height,
 282                 cfg->dst.left, cfg->dst.top, cfg->dst.width, cfg->dst.height,
 283                 cfg->pixelformat, cfg->pitch, &cfg->mem[0], &cfg->mem[1],
 284                 &cfg->mem[2], cfg->zpos);
 285
 286         /*
 287          * Store the format, stride, memory buffer address, crop and compose
 288          * rectangles and Z-order position and for the input.
 289          */
 290         fmtinfo = vsp1_get_format_info(vsp1, cfg->pixelformat);
 291         if (!fmtinfo) {
 292                 dev_dbg(vsp1->dev, "Unsupport pixel format %08x for RPF\n",
 293                         cfg->pixelformat);
 294                 return -EINVAL;
 295         }
 296
 297         rpf->fmtinfo = fmtinfo;
 298         rpf->format.num_planes = fmtinfo->planes;
 299         rpf->format.plane_fmt[0].bytesperline = cfg->pitch;
 300         rpf->format.plane_fmt[1].bytesperline = cfg->pitch;
 301         rpf->alpha = cfg->alpha;
 302
 303         rpf->mem.addr[0] = cfg->mem[0];
 304         rpf->mem.addr[1] = cfg->mem[1];
 305         rpf->mem.addr[2] = cfg->mem[2];
 306
 307         vsp1->drm->inputs[rpf_index].crop = cfg->src;
 308         vsp1->drm->inputs[rpf_index].compose = cfg->dst;
 309         vsp1->drm->inputs[rpf_index].zpos = cfg->zpos;
 310         vsp1->drm->inputs[rpf_index].enabled = true;
 311
 312         return 0;
 313 }
 314 EXPORT_SYMBOL_GPL(vsp1_du_atomic_update);
 315
 316 static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
 317                                   struct vsp1_rwpf *rpf, unsigned int bru_input)
 318 {
 319         struct v4l2_subdev_selection sel;
 320         struct v4l2_subdev_format format;
 321         const struct v4l2_rect *crop;
 322         int ret;
 323
 324         /* Configure the format on the RPF sink pad and propagate it up to the
 325          * BRU sink pad.
 326          */
 327         crop = &vsp1->drm->inputs[rpf->entity.index].crop;
 328
 329         memset(&format, 0, sizeof(format));
 330         format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 331         format.pad = RWPF_PAD_SINK;
 332         format.format.width = crop->width + crop->left;
 333         format.format.height = crop->height + crop->top;
 334         format.format.code = rpf->fmtinfo->mbus;
 335         format.format.field = V4L2_FIELD_NONE;
 336
 337         ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
 338                                &format);
 339         if (ret < 0)
 340                 return ret;
 341
 342         dev_dbg(vsp1->dev,
 343                 "%s: set format %ux%u (%x) on RPF%u sink\n",
 344                 __func__, format.format.width, format.format.height,
 345                 format.format.code, rpf->entity.index);
 346
 347         memset(&sel, 0, sizeof(sel));
 348         sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 349         sel.pad = RWPF_PAD_SINK;
 350         sel.target = V4L2_SEL_TGT_CROP;
 351         sel.r = *crop;
 352
 353         ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_selection, NULL,
 354                                &sel);
 355         if (ret < 0)
 356                 return ret;
 357
 358         dev_dbg(vsp1->dev,
 359                 "%s: set selection (%u,%u)/%ux%u on RPF%u sink\n",
 360                 __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
 361                 rpf->entity.index);
 362
 363         /* RPF source, hardcode the format to ARGB8888 to turn on format
 364          * conversion if needed.
 365          */
 366         format.pad = RWPF_PAD_SOURCE;
 367
 368         ret = v4l2_subdev_call(&rpf->entity.subdev, pad, get_fmt, NULL,
 369                                &format);
 370         if (ret < 0)
 371                 return ret;
 372
 373         dev_dbg(vsp1->dev,
 374                 "%s: got format %ux%u (%x) on RPF%u source\n",
 375                 __func__, format.format.width, format.format.height,
 376                 format.format.code, rpf->entity.index);
 377
 378         format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
 379
 380         ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
 381                                &format);
 382         if (ret < 0)
 383                 return ret;
 384
 385         /* BRU sink, propagate the format from the RPF source. */
 386         format.pad = bru_input;
 387
 388         ret = v4l2_subdev_call(&vsp1->bru->entity.subdev, pad, set_fmt, NULL,
 389                                &format);
 390         if (ret < 0)
 391                 return ret;
 392
 393         dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
 394                 __func__, format.format.width, format.format.height,
 395                 format.format.code, format.pad);
 396
 397         sel.pad = bru_input;
 398         sel.target = V4L2_SEL_TGT_COMPOSE;
 399         sel.r = vsp1->drm->inputs[rpf->entity.index].compose;
 400
 401         ret = v4l2_subdev_call(&vsp1->bru->entity.subdev, pad, set_selection,
 402                                NULL, &sel);
 403         if (ret < 0)
 404                 return ret;
 405
 406         dev_dbg(vsp1->dev,
 407                 "%s: set selection (%u,%u)/%ux%u on BRU pad %u\n",
 408                 __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
 409                 sel.pad);
 410
 411         return 0;
 412 }
 413
 414 static unsigned int rpf_zpos(struct vsp1_device *vsp1, struct vsp1_rwpf *rpf)
 415 {
 416         return vsp1->drm->inputs[rpf->entity.index].zpos;
 417 }
 418
 419 /**
 420  * vsp1_du_atomic_flush - Commit an atomic update
 421  * @dev: the VSP device
 422  */
 423 void vsp1_du_atomic_flush(struct device *dev)
 424 {
 425         struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 426         struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
 427         struct vsp1_rwpf *inputs[VSP1_MAX_RPF] = { NULL, };
 428         struct vsp1_entity *entity;
 429         unsigned long flags;
 430         unsigned int i;
 431         int ret;
 432
 433         /* Count the number of enabled inputs and sort them by Z-order. */
 434         pipe->num_inputs = 0;
 435
 436         for (i = 0; i < vsp1->info->rpf_count; ++i) {
 437                 struct vsp1_rwpf *rpf = vsp1->rpf[i];
 438                 unsigned int j;
 439
 440                 if (!vsp1->drm->inputs[i].enabled) {
 441                         pipe->inputs[i] = NULL;
 442                         continue;
 443                 }
 444
 445                 pipe->inputs[i] = rpf;
 446
 447                 /* Insert the RPF in the sorted RPFs array. */
 448                 for (j = pipe->num_inputs++; j > 0; --j) {
 449                         if (rpf_zpos(vsp1, inputs[j-1]) <= rpf_zpos(vsp1, rpf))
 450                                 break;
 451                         inputs[j] = inputs[j-1];
 452                 }
 453
 454                 inputs[j] = rpf;
 455         }
 456
 457         /* Setup the RPF input pipeline for every enabled input. */
 458         for (i = 0; i < vsp1->info->num_bru_inputs; ++i) {
 459                 struct vsp1_rwpf *rpf = inputs[i];
 460
 461                 if (!rpf) {
 462                         vsp1->bru->inputs[i].rpf = NULL;
 463                         continue;
 464                 }
 465
 466                 vsp1->bru->inputs[i].rpf = rpf;
 467                 rpf->bru_input = i;
 468                 rpf->entity.sink_pad = i;
 469
 470                 dev_dbg(vsp1->dev, "%s: connecting RPF.%u to BRU:%u\n",
 471                         __func__, rpf->entity.index, i);
 472
 473                 ret = vsp1_du_setup_rpf_pipe(vsp1, rpf, i);
 474                 if (ret < 0)
 475                         dev_err(vsp1->dev,
 476                                 "%s: failed to setup RPF.%u\n",
 477                                 __func__, rpf->entity.index);
 478         }
 479
 480         /* Configure all entities in the pipeline. */
 481         list_for_each_entry(entity, &pipe->entities, list_pipe) {
 482                 /* Disconnect unused RPFs from the pipeline. */
 483                 if (entity->type == VSP1_ENTITY_RPF) {
 484                         struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);
 485
 486                         if (!pipe->inputs[rpf->entity.index]) {
 487                                 vsp1_dl_list_write(pipe->dl, entity->route->reg,
 488                                                    VI6_DPR_NODE_UNUSED);
 489                                 continue;
 490                         }
 491                 }
 492
 493                 vsp1_entity_route_setup(entity, pipe->dl);
 494
 495                 if (entity->ops->configure) {
 496                         entity->ops->configure(entity, pipe, pipe->dl,
 497                                                VSP1_ENTITY_PARAMS_INIT);
 498                         entity->ops->configure(entity, pipe, pipe->dl,
 499                                                VSP1_ENTITY_PARAMS_RUNTIME);
 500                         entity->ops->configure(entity, pipe, pipe->dl,
 501                                                VSP1_ENTITY_PARAMS_PARTITION);
 502                 }
 503         }
 504
 505         vsp1_dl_list_commit(pipe->dl);
 506         pipe->dl = NULL;
 507
 508         /* Start or stop the pipeline if needed. */
 509         if (!vsp1->drm->num_inputs && pipe->num_inputs) {
 510                 vsp1_write(vsp1, VI6_DISP_IRQ_STA, 0);
 511                 vsp1_write(vsp1, VI6_DISP_IRQ_ENB, VI6_DISP_IRQ_ENB_DSTE);
 512                 spin_lock_irqsave(&pipe->irqlock, flags);
 513                 vsp1_pipeline_run(pipe);
 514                 spin_unlock_irqrestore(&pipe->irqlock, flags);
 515         } else if (vsp1->drm->num_inputs && !pipe->num_inputs) {
 516                 vsp1_write(vsp1, VI6_DISP_IRQ_ENB, 0);
 517                 vsp1_pipeline_stop(pipe);
 518         }
 519 }
 520 EXPORT_SYMBOL_GPL(vsp1_du_atomic_flush);
 521
 522 /* -----------------------------------------------------------------------------
 523  * Initialization
 524  */
 525
 526 int vsp1_drm_create_links(struct vsp1_device *vsp1)
 527 {
 528         const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE;
 529         unsigned int i;
 530         int ret;
 531
 532         /* VSPD instances require a BRU to perform composition and a LIF to
 533          * output to the DU.
 534          */
 535         if (!vsp1->bru || !vsp1->lif)
 536                 return -ENXIO;
 537
 538         for (i = 0; i < vsp1->info->rpf_count; ++i) {
 539                 struct vsp1_rwpf *rpf = vsp1->rpf[i];
 540
 541                 ret = media_create_pad_link(&rpf->entity.subdev.entity,
 542                                             RWPF_PAD_SOURCE,
 543                                             &vsp1->bru->entity.subdev.entity,
 544                                             i, flags);
 545                 if (ret < 0)
 546                         return ret;
 547
 548                 rpf->entity.sink = &vsp1->bru->entity.subdev.entity;
 549                 rpf->entity.sink_pad = i;
 550         }
 551
 552         ret = media_create_pad_link(&vsp1->bru->entity.subdev.entity,
 553                                     vsp1->bru->entity.source_pad,
 554                                     &vsp1->wpf[0]->entity.subdev.entity,
 555                                     RWPF_PAD_SINK, flags);
 556         if (ret < 0)
 557                 return ret;
 558
 559         vsp1->bru->entity.sink = &vsp1->wpf[0]->entity.subdev.entity;
 560         vsp1->bru->entity.sink_pad = RWPF_PAD_SINK;
 561
 562         ret = media_create_pad_link(&vsp1->wpf[0]->entity.subdev.entity,
 563                                     RWPF_PAD_SOURCE,
 564                                     &vsp1->lif->entity.subdev.entity,
 565                                     LIF_PAD_SINK, flags);
 566         if (ret < 0)
 567                 return ret;
 568
 569         return 0;
 570 }
 571
 572 int vsp1_drm_init(struct vsp1_device *vsp1)
 573 {
 574         struct vsp1_pipeline *pipe;
 575         unsigned int i;
 576
 577         vsp1->drm = devm_kzalloc(vsp1->dev, sizeof(*vsp1->drm), GFP_KERNEL);
 578         if (!vsp1->drm)
 579                 return -ENOMEM;
 580
 581         pipe = &vsp1->drm->pipe;
 582
 583         vsp1_pipeline_init(pipe);
 584
 585         /* The DRM pipeline is static, add entities manually. */
 586         for (i = 0; i < vsp1->info->rpf_count; ++i) {
 587                 struct vsp1_rwpf *input = vsp1->rpf[i];
 588
 589                 list_add_tail(&input->entity.list_pipe, &pipe->entities);
 590         }
 591
 592         list_add_tail(&vsp1->bru->entity.list_pipe, &pipe->entities);
 593         list_add_tail(&vsp1->wpf[0]->entity.list_pipe, &pipe->entities);
 594         list_add_tail(&vsp1->lif->entity.list_pipe, &pipe->entities);
 595
 596         pipe->bru = &vsp1->bru->entity;
 597         pipe->lif = &vsp1->lif->entity;
 598         pipe->output = vsp1->wpf[0];
 599
 600         return 0;
 601 }
 602
 603 void vsp1_drm_cleanup(struct vsp1_device *vsp1)
 604 {
 605 }