drivers/media/radio/Kconfig

   1 #
   2 # Multimedia Video device configuration
   3 #
   4
   5 menuconfig RADIO_ADAPTERS
   6         bool "Radio Adapters"
   7         depends on VIDEO_V4L2
   8         default y
   9         ---help---
  10           Say Y here to enable selecting AM/FM radio adapters.
  11
  12 if RADIO_ADAPTERS && VIDEO_V4L2
  13
  14 config RADIO_SI470X
  15         bool "Silicon Labs Si470x FM Radio Receiver support"
  16         depends on VIDEO_V4L2
  17
  18 source "drivers/media/radio/si470x/Kconfig"
  19
  20 config USB_MR800
  21         tristate "AverMedia MR 800 USB FM radio support"
  22         depends on USB && VIDEO_V4L2
  23         ---help---
  24           Say Y here if you want to connect this type of radio to your
  25           computer's USB port. Note that the audio is not digital, and
  26           you must connect the line out connector to a sound card or a
  27           set of speakers.
  28
  29           To compile this driver as a module, choose M here: the
  30           module will be called radio-mr800.
  31
  32 config USB_DSBR
  33         tristate "D-Link/GemTek USB FM radio support"
  34         depends on USB && VIDEO_V4L2
  35         ---help---
  36           Say Y here if you want to connect this type of radio to your
  37           computer's USB port. Note that the audio is not digital, and
  38           you must connect the line out connector to a sound card or a
  39           set of speakers.
  40
  41           To compile this driver as a module, choose M here: the
  42           module will be called dsbr100.
  43
  44 config RADIO_MAXIRADIO
  45         tristate "Guillemot MAXI Radio FM 2000 radio"
  46         depends on VIDEO_V4L2 && PCI
  47         ---help---
  48           Choose Y here if you have this radio card.  This card may also be
  49           found as Gemtek PCI FM.
  50
  51           In order to control your radio card, you will need to use programs
  52           that are compatible with the Video For Linux API.  Information on
  53           this API and pointers to "v4l" programs may be found at
  54           <file:Documentation/video4linux/API.html>.
  55
  56           To compile this driver as a module, choose M here: the
  57           module will be called radio-maxiradio.
  58
  59
  60 config I2C_SI4713
  61         tristate "I2C driver for Silicon Labs Si4713 device"
  62         depends on I2C && VIDEO_V4L2
  63         ---help---
  64           Say Y here if you want support to Si4713 I2C device.
  65           This device driver supports only i2c bus.
  66
  67           To compile this driver as a module, choose M here: the
  68           module will be called si4713.
  69
  70 config RADIO_SI4713
  71         tristate "Silicon Labs Si4713 FM Radio Transmitter support"
  72         depends on I2C && VIDEO_V4L2
  73         select I2C_SI4713
  74         ---help---
  75           Say Y here if you want support to Si4713 FM Radio Transmitter.
  76           This device can transmit audio through FM. It can transmit
  77           RDS and RBDS signals as well. This module is the v4l2 radio
  78           interface for the i2c driver of this device.
  79
  80           To compile this driver as a module, choose M here: the
  81           module will be called radio-si4713.
  82
  83 config RADIO_TEA5764
  84         tristate "TEA5764 I2C FM radio support"
  85         depends on I2C && VIDEO_V4L2
  86         ---help---
  87           Say Y here if you want to use the TEA5764 FM chip found in
  88           EZX phones. This FM chip is present in EZX phones from Motorola,
  89           connected to internal pxa I2C bus.
  90
  91           To compile this driver as a module, choose M here: the
  92           module will be called radio-tea5764.
  93
  94 config RADIO_TEA5764_XTAL
  95         bool "TEA5764 crystal reference"
  96         depends on RADIO_TEA5764=y
  97         default y
  98         help
  99           Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
 100           here if TEA5764 reference frequency is connected in FREQIN.
 101
 102 config RADIO_SAA7706H
 103         tristate "SAA7706H Car Radio DSP"
 104         depends on I2C && VIDEO_V4L2
 105         ---help---
 106           Say Y here if you want to use the SAA7706H Car radio Digital
 107           Signal Processor, found for instance on the Russellville development
 108           board. On the russellville the device is connected to internal
 109           timberdale I2C bus.
 110
 111           To compile this driver as a module, choose M here: the
 112           module will be called SAA7706H.
 113
 114 config RADIO_TEF6862
 115         tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
 116         depends on I2C && VIDEO_V4L2
 117         ---help---
 118           Say Y here if you want to use the TEF6862 Car Radio Enhanced
 119           Selectivity Tuner, found for instance on the Russellville development
 120           board. On the russellville the device is connected to internal
 121           timberdale I2C bus.
 122
 123           To compile this driver as a module, choose M here: the
 124           module will be called TEF6862.
 125
 126 config RADIO_TIMBERDALE
 127         tristate "Enable the Timberdale radio driver"
 128         depends on MFD_TIMBERDALE && VIDEO_V4L2
 129         depends on I2C  # for RADIO_SAA7706H
 130         select RADIO_TEF6862
 131         select RADIO_SAA7706H
 132         ---help---
 133           This is a kind of umbrella driver for the Radio Tuner and DSP
 134           found behind the Timberdale FPGA on the Russellville board.
 135           Enabling this driver will automatically select the DSP and tuner.
 136
 137 config RADIO_WL1273
 138         tristate "Texas Instruments WL1273 I2C FM Radio"
 139         depends on I2C && VIDEO_V4L2
 140         select MFD_CORE
 141         select MFD_WL1273_CORE
 142         select FW_LOADER
 143         ---help---
 144           Choose Y here if you have this FM radio chip.
 145
 146           In order to control your radio card, you will need to use programs
 147           that are compatible with the Video For Linux 2 API.  Information on
 148           this API and pointers to "v4l2" programs may be found at
 149           <file:Documentation/video4linux/API.html>.
 150
 151           To compile this driver as a module, choose M here: the
 152           module will be called radio-wl1273.
 153
 154 # TI's ST based wl128x FM radio
 155 source "drivers/media/radio/wl128x/Kconfig"
 156
 157 #
 158 # ISA drivers configuration
 159 #
 160
 161 menuconfig V4L_RADIO_ISA_DRIVERS
 162         bool "ISA radio devices"
 163         depends on ISA
 164         default n
 165         ---help---
 166           Say Y here to enable support for these ISA drivers.
 167
 168 if V4L_RADIO_ISA_DRIVERS
 169
 170 config RADIO_CADET
 171         tristate "ADS Cadet AM/FM Tuner"
 172         depends on ISA && VIDEO_V4L2
 173         ---help---
 174           Choose Y here if you have one of these AM/FM radio cards, and then
 175           fill in the port address below.
 176
 177           In order to control your radio card, you will need to use programs
 178           that are compatible with the Video For Linux API.  Information on
 179           this API and pointers to "v4l" programs may be found at
 180           <file:Documentation/video4linux/API.html>.
 181
 182           Further documentation on this driver can be found on the WWW at
 183           <http://linux.blackhawke.net/cadet/>.
 184
 185           To compile this driver as a module, choose M here: the
 186           module will be called radio-cadet.
 187
 188 config RADIO_RTRACK
 189         tristate "AIMSlab RadioTrack (aka RadioReveal) support"
 190         depends on ISA && VIDEO_V4L2
 191         ---help---
 192           Choose Y here if you have one of these FM radio cards, and then fill
 193           in the port address below.
 194
 195           Note that newer AIMSlab RadioTrack cards have a different chipset
 196           and are not supported by this driver.  For these cards, use the
 197           RadioTrack II driver below.
 198
 199           If you have a GemTeks combined (PnP) sound- and radio card you must
 200           use this driver as a module and setup the card with isapnptools.
 201           You must also pass the module a suitable io parameter, 0x248 has
 202           been reported to be used by these cards.
 203
 204           In order to control your radio card, you will need to use programs
 205           that are compatible with the Video For Linux API.  Information on
 206           this API and pointers to "v4l" programs may be found at
 207           <file:Documentation/video4linux/API.html>. More information is
 208           contained in the file
 209           <file:Documentation/video4linux/radiotrack.txt>.
 210
 211           To compile this driver as a module, choose M here: the
 212           module will be called radio-aimslab.
 213
 214 config RADIO_RTRACK_PORT
 215         hex "RadioTrack i/o port (0x20f or 0x30f)"
 216         depends on RADIO_RTRACK=y
 217         default "20f"
 218         help
 219           Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
 220           haven't changed the jumper setting on the card.
 221
 222 config RADIO_RTRACK2
 223         tristate "AIMSlab RadioTrack II support"
 224         depends on ISA && VIDEO_V4L2
 225         ---help---
 226           Choose Y here if you have this FM radio card, and then fill in the
 227           port address below.
 228
 229           In order to control your radio card, you will need to use programs
 230           that are compatible with the Video For Linux API.  Information on
 231           this API and pointers to "v4l" programs may be found at
 232           <file:Documentation/video4linux/API.html>.
 233
 234           To compile this driver as a module, choose M here: the
 235           module will be called radio-rtrack2.
 236
 237 config RADIO_RTRACK2_PORT
 238         hex "RadioTrack II i/o port (0x20c or 0x30c)"
 239         depends on RADIO_RTRACK2=y
 240         default "30c"
 241         help
 242           Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
 243           haven't changed the jumper setting on the card.
 244
 245 config RADIO_AZTECH
 246         tristate "Aztech/Packard Bell Radio"
 247         depends on ISA && VIDEO_V4L2
 248         ---help---
 249           Choose Y here if you have one of these FM radio cards, and then fill
 250           in the port address below.
 251
 252           In order to control your radio card, you will need to use programs
 253           that are compatible with the Video For Linux API.  Information on
 254           this API and pointers to "v4l" programs may be found at
 255           <file:Documentation/video4linux/API.html>.
 256
 257           To compile this driver as a module, choose M here: the
 258           module will be called radio-aztech.
 259
 260 config RADIO_AZTECH_PORT
 261         hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
 262         depends on RADIO_AZTECH=y
 263         default "350"
 264         help
 265           Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
 266           haven't changed the setting of jumper JP3 on the card.  Removing the
 267           jumper sets the card to 0x358.
 268
 269 config RADIO_GEMTEK
 270         tristate "GemTek Radio card (or compatible) support"
 271         depends on ISA && VIDEO_V4L2
 272         ---help---
 273           Choose Y here if you have this FM radio card, and then fill in the
 274           I/O port address and settings below. The following cards either have
 275           GemTek Radio tuner or are rebranded GemTek Radio cards:
 276
 277           - Sound Vision 16 Gold with FM Radio
 278           - Typhoon Radio card (some models)
 279           - Hama Radio card
 280
 281           In order to control your radio card, you will need to use programs
 282           that are compatible with the Video For Linux API.  Information on
 283           this API and pointers to "v4l" programs may be found at
 284           <file:Documentation/video4linux/API.html>.
 285
 286           To compile this driver as a module, choose M here: the
 287           module will be called radio-gemtek.
 288
 289 config RADIO_GEMTEK_PORT
 290         hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
 291         depends on RADIO_GEMTEK=y
 292         default "34c"
 293         help
 294           Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
 295           0x34c, if you haven't changed the jumper setting on the card. On
 296           Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
 297           port is 0x20c, 0x248 or 0x28c.
 298           If automatic I/O port probing is enabled this port will be used only
 299           in case of automatic probing failure, ie. as a fallback.
 300
 301 config RADIO_GEMTEK_PROBE
 302         bool "Automatic I/O port probing"
 303         depends on RADIO_GEMTEK=y
 304         default y
 305         help
 306           Say Y here to enable automatic probing for GemTek Radio card. The
 307           following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
 308           0x28c.
 309
 310 config RADIO_MIROPCM20
 311         tristate "miroSOUND PCM20 radio"
 312         depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
 313         select SND_ISA
 314         select SND_MIRO
 315         ---help---
 316           Choose Y here if you have this FM radio card. You also need to enable
 317           the ALSA sound system. This choice automatically selects the ALSA
 318           sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
 319           is required for the radio-miropcm20.
 320
 321           In order to control your radio card, you will need to use programs
 322           that are compatible with the Video For Linux API.  Information on
 323           this API and pointers to "v4l" programs may be found at
 324           <file:Documentation/video4linux/API.html>.
 325
 326           To compile this driver as a module, choose M here: the
 327           module will be called radio-miropcm20.
 328
 329 config RADIO_SF16FMI
 330         tristate "SF16-FMI/SF16-FMP Radio"
 331         depends on ISA && VIDEO_V4L2
 332         ---help---
 333           Choose Y here if you have one of these FM radio cards.
 334
 335           In order to control your radio card, you will need to use programs
 336           that are compatible with the Video For Linux API.  Information on
 337           this API and pointers to "v4l" programs may be found at
 338           <file:Documentation/video4linux/API.html>.
 339
 340           To compile this driver as a module, choose M here: the
 341           module will be called radio-sf16fmi.
 342
 343 config RADIO_SF16FMR2
 344         tristate "SF16FMR2 Radio"
 345         depends on ISA && VIDEO_V4L2 && SND
 346         ---help---
 347           Choose Y here if you have one of these FM radio cards.
 348
 349           In order to control your radio card, you will need to use programs
 350           that are compatible with the Video For Linux API.  Information on
 351           this API and pointers to "v4l" programs may be found on the WWW at
 352           <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
 353
 354           To compile this driver as a module, choose M here: the
 355           module will be called radio-sf16fmr2.
 356
 357 config RADIO_TERRATEC
 358         tristate "TerraTec ActiveRadio ISA Standalone"
 359         depends on ISA && VIDEO_V4L2
 360         ---help---
 361           Choose Y here if you have this FM radio card, and then fill in the
 362           port address below. (TODO)
 363
 364           Note: This driver is in its early stages.  Right now volume and
 365           frequency control and muting works at least for me, but
 366           unfortunately I have not found anybody who wants to use this card
 367           with Linux.  So if it is this what YOU are trying to do right now,
 368           PLEASE DROP ME A NOTE!!  Rolf Offermanns <rolf@offermanns.de>.
 369
 370           In order to control your radio card, you will need to use programs
 371           that are compatible with the Video For Linux API.  Information on
 372           this API and pointers to "v4l" programs may be found at
 373           <file:Documentation/video4linux/API.html>.
 374
 375           To compile this driver as a module, choose M here: the
 376           module will be called radio-terratec.
 377
 378 config RADIO_TERRATEC_PORT
 379         hex "Terratec i/o port (normally 0x590)"
 380         depends on RADIO_TERRATEC=y
 381         default "590"
 382         help
 383           Fill in the I/O port of your TerraTec FM radio card. If unsure, go
 384           with the default.
 385
 386 config RADIO_TRUST
 387         tristate "Trust FM radio card"
 388         depends on ISA && VIDEO_V4L2
 389         help
 390           This is a driver for the Trust FM radio cards. Say Y if you have
 391           such a card and want to use it under Linux.
 392
 393           To compile this driver as a module, choose M here: the
 394           module will be called radio-trust.
 395
 396 config RADIO_TRUST_PORT
 397         hex "Trust i/o port (usually 0x350 or 0x358)"
 398         depends on RADIO_TRUST=y
 399         default "350"
 400         help
 401           Enter the I/O port of your Trust FM radio card. If unsure, try the
 402           values "0x350" or "0x358".
 403
 404 config RADIO_TYPHOON
 405         tristate "Typhoon Radio (a.k.a. EcoRadio)"
 406         depends on ISA && VIDEO_V4L2
 407         ---help---
 408           Choose Y here if you have one of these FM radio cards, and then fill
 409           in the port address and the frequency used for muting below.
 410
 411           In order to control your radio card, you will need to use programs
 412           that are compatible with the Video For Linux API.  Information on
 413           this API and pointers to "v4l" programs may be found at
 414           <file:Documentation/video4linux/API.html>.
 415
 416           To compile this driver as a module, choose M here: the
 417           module will be called radio-typhoon.
 418
 419 config RADIO_TYPHOON_PORT
 420         hex "Typhoon I/O port (0x316 or 0x336)"
 421         depends on RADIO_TYPHOON=y
 422         default "316"
 423         help
 424           Enter the I/O port of your Typhoon or EcoRadio radio card.
 425
 426 config RADIO_TYPHOON_MUTEFREQ
 427         int "Typhoon frequency set when muting the device (kHz)"
 428         depends on RADIO_TYPHOON=y
 429         default "87500"
 430         help
 431           Enter the frequency used for muting the radio. The device is never
 432           completely silent. If the volume is just turned down, you can still
 433           hear silent voices and music. For that reason, the frequency of the
 434           radio device is set to the frequency you can enter here whenever
 435           the device is muted. There should be no local radio station at that
 436           frequency.
 437
 438 config RADIO_ZOLTRIX
 439         tristate "Zoltrix Radio"
 440         depends on ISA && VIDEO_V4L2
 441         ---help---
 442           Choose Y here if you have one of these FM radio cards, and then fill
 443           in the port address below.
 444
 445           In order to control your radio card, you will need to use programs
 446           that are compatible with the Video For Linux API.  Information on
 447           this API and pointers to "v4l" programs may be found at
 448           <file:Documentation/video4linux/API.html>.
 449
 450           To compile this driver as a module, choose M here: the
 451           module will be called radio-zoltrix.
 452
 453 config RADIO_ZOLTRIX_PORT
 454         hex "ZOLTRIX I/O port (0x20c or 0x30c)"
 455         depends on RADIO_ZOLTRIX=y
 456         default "20c"
 457         help
 458           Enter the I/O port of your Zoltrix radio card.
 459
 460 endif # V4L_RADIO_ISA_DRIVERS
 461
 462 endif # RADIO_ADAPTERS