drivers/media/rc/Kconfig

   1 config RC_CORE
   2         tristate
   3         depends on MEDIA_RC_SUPPORT
   4         depends on INPUT
   5         default y
   6
   7 source "drivers/media/rc/keymaps/Kconfig"
   8
   9 menuconfig RC_DECODERS
  10         bool "Remote controller decoders"
  11         depends on RC_CORE
  12         default y
  13
  14 if RC_DECODERS
  15 config LIRC
  16         tristate "LIRC interface driver"
  17         depends on RC_CORE
  18
  19         ---help---
  20            Enable this option to build the Linux Infrared Remote
  21            Control (LIRC) core device interface driver. The LIRC
  22            interface passes raw IR to and from userspace, where the
  23            LIRC daemon handles protocol decoding for IR reception and
  24            encoding for IR transmitting (aka "blasting").
  25
  26 config IR_LIRC_CODEC
  27         tristate "Enable IR to LIRC bridge"
  28         depends on RC_CORE
  29         depends on LIRC
  30         default y
  31
  32         ---help---
  33            Enable this option to pass raw IR to and from userspace via
  34            the LIRC interface.
  35
  36
  37 config IR_NEC_DECODER
  38         tristate "Enable IR raw decoder for the NEC protocol"
  39         depends on RC_CORE
  40         select BITREVERSE
  41         default y
  42
  43         ---help---
  44            Enable this option if you have IR with NEC protocol, and
  45            if the IR is decoded in software
  46
  47 config IR_RC5_DECODER
  48         tristate "Enable IR raw decoder for the RC-5 protocol"
  49         depends on RC_CORE
  50         select BITREVERSE
  51         default y
  52
  53         ---help---
  54            Enable this option if you have IR with RC-5 protocol, and
  55            if the IR is decoded in software
  56
  57 config IR_RC6_DECODER
  58         tristate "Enable IR raw decoder for the RC6 protocol"
  59         depends on RC_CORE
  60         select BITREVERSE
  61         default y
  62
  63         ---help---
  64            Enable this option if you have an infrared remote control which
  65            uses the RC6 protocol, and you need software decoding support.
  66
  67 config IR_JVC_DECODER
  68         tristate "Enable IR raw decoder for the JVC protocol"
  69         depends on RC_CORE
  70         select BITREVERSE
  71         default y
  72
  73         ---help---
  74            Enable this option if you have an infrared remote control which
  75            uses the JVC protocol, and you need software decoding support.
  76
  77 config IR_SONY_DECODER
  78         tristate "Enable IR raw decoder for the Sony protocol"
  79         depends on RC_CORE
  80         select BITREVERSE
  81         default y
  82
  83         ---help---
  84            Enable this option if you have an infrared remote control which
  85            uses the Sony protocol, and you need software decoding support.
  86
  87 config IR_SANYO_DECODER
  88         tristate "Enable IR raw decoder for the Sanyo protocol"
  89         depends on RC_CORE
  90         default y
  91
  92         ---help---
  93            Enable this option if you have an infrared remote control which
  94            uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
  95            and you need software decoding support.
  96
  97 config IR_SHARP_DECODER
  98         tristate "Enable IR raw decoder for the Sharp protocol"
  99         depends on RC_CORE
 100         default y
 101
 102         ---help---
 103            Enable this option if you have an infrared remote control which
 104            uses the Sharp protocol, and you need software decoding support.
 105
 106 config IR_MCE_KBD_DECODER
 107         tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
 108         depends on RC_CORE
 109         select BITREVERSE
 110         default y
 111
 112         ---help---
 113            Enable this option if you have a Microsoft Remote Keyboard for
 114            Windows Media Center Edition, which you would like to use with
 115            a raw IR receiver in your system.
 116
 117 config IR_XMP_DECODER
 118         tristate "Enable IR raw decoder for the XMP protocol"
 119         depends on RC_CORE
 120         select BITREVERSE
 121         default y
 122
 123         ---help---
 124            Enable this option if you have IR with XMP protocol, and
 125            if the IR is decoded in software
 126 endif #RC_DECODERS
 127
 128 menuconfig RC_DEVICES
 129         bool "Remote Controller devices"
 130         depends on RC_CORE
 131
 132 if RC_DEVICES
 133
 134 config RC_ATI_REMOTE
 135         tristate "ATI / X10 based USB RF remote controls"
 136         depends on USB_ARCH_HAS_HCD
 137         depends on RC_CORE
 138         select USB
 139         help
 140            Say Y here if you want to use an X10 based USB remote control.
 141            These are RF remotes with USB receivers.
 142
 143            Such devices include the ATI remote that comes with many of ATI's
 144            All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
 145            Medion RF remote, and SnapStream FireFly remote.
 146
 147            This driver provides mouse pointer, left and right mouse buttons,
 148            and maps all the other remote buttons to keypress events.
 149
 150            To compile this driver as a module, choose M here: the module will be
 151            called ati_remote.
 152
 153 config IR_ENE
 154         tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 155         depends on PNP
 156         depends on RC_CORE
 157         ---help---
 158            Say Y here to enable support for integrated infrared receiver
 159            /transceiver made by ENE.
 160
 161            You can see if you have it by looking at lspnp output.
 162            Output should include ENE0100 ENE0200 or something similar.
 163
 164            To compile this driver as a module, choose M here: the
 165            module will be called ene_ir.
 166
 167 config IR_IMON
 168         tristate "SoundGraph iMON Receiver and Display"
 169         depends on USB_ARCH_HAS_HCD
 170         depends on RC_CORE
 171         select USB
 172         ---help---
 173            Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
 174            IR Receiver and/or LCD/VFD/VGA display.
 175
 176            To compile this driver as a module, choose M here: the
 177            module will be called imon.
 178
 179 config IR_MCEUSB
 180         tristate "Windows Media Center Ed. eHome Infrared Transceiver"
 181         depends on USB_ARCH_HAS_HCD
 182         depends on RC_CORE
 183         select USB
 184         ---help---
 185            Say Y here if you want to use a Windows Media Center Edition
 186            eHome Infrared Transceiver.
 187
 188            To compile this driver as a module, choose M here: the
 189            module will be called mceusb.
 190
 191 config IR_ITE_CIR
 192         tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
 193         depends on PNP
 194         depends on RC_CORE
 195         ---help---
 196            Say Y here to enable support for integrated infrared receivers
 197            /transceivers made by ITE Tech Inc. These are found in
 198            several ASUS devices, like the ASUS Digimatrix or the ASUS
 199            EEEBox 1501U.
 200
 201            To compile this driver as a module, choose M here: the
 202            module will be called ite-cir.
 203
 204 config IR_FINTEK
 205         tristate "Fintek Consumer Infrared Transceiver"
 206         depends on PNP
 207         depends on RC_CORE
 208         ---help---
 209            Say Y here to enable support for integrated infrared receiver
 210            /transciever made by Fintek. This chip is found on assorted
 211            Jetway motherboards (and of course, possibly others).
 212
 213            To compile this driver as a module, choose M here: the
 214            module will be called fintek-cir.
 215
 216 config IR_NUVOTON
 217         tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 218         depends on PNP
 219         depends on RC_CORE
 220         ---help---
 221            Say Y here to enable support for integrated infrared receiver
 222            /transciever made by Nuvoton (formerly Winbond). This chip is
 223            found in the ASRock ION 330HT, as well as assorted Intel
 224            DP55-series motherboards (and of course, possibly others).
 225
 226            To compile this driver as a module, choose M here: the
 227            module will be called nuvoton-cir.
 228
 229 config IR_REDRAT3
 230         tristate "RedRat3 IR Transceiver"
 231         depends on USB_ARCH_HAS_HCD
 232         depends on RC_CORE
 233         select NEW_LEDS
 234         select LEDS_CLASS
 235         select USB
 236         ---help---
 237            Say Y here if you want to use a RedRat3 Infrared Transceiver.
 238
 239            To compile this driver as a module, choose M here: the
 240            module will be called redrat3.
 241
 242 config IR_STREAMZAP
 243         tristate "Streamzap PC Remote IR Receiver"
 244         depends on USB_ARCH_HAS_HCD
 245         depends on RC_CORE
 246         select USB
 247         ---help---
 248            Say Y here if you want to use a Streamzap PC Remote
 249            Infrared Receiver.
 250
 251            To compile this driver as a module, choose M here: the
 252            module will be called streamzap.
 253
 254 config IR_WINBOND_CIR
 255         tristate "Winbond IR remote control"
 256         depends on X86 && PNP
 257         depends on RC_CORE
 258         select NEW_LEDS
 259         select LEDS_CLASS
 260         select BITREVERSE
 261         ---help---
 262            Say Y here if you want to use the IR remote functionality found
 263            in some Winbond SuperI/O chips. Currently only the WPCD376I
 264            chip is supported (included in some Intel Media series
 265            motherboards).
 266
 267            To compile this driver as a module, choose M here: the module will
 268            be called winbond_cir.
 269
 270 config IR_IGUANA
 271         tristate "IguanaWorks USB IR Transceiver"
 272         depends on USB_ARCH_HAS_HCD
 273         depends on RC_CORE
 274         select USB
 275         ---help---
 276            Say Y here if you want to use the IguanaWorks USB IR Transceiver.
 277            Both infrared receive and send are supported. If you want to
 278            change the ID or the pin config, use the user space driver from
 279            IguanaWorks.
 280
 281            Only firmware 0x0205 and later is supported.
 282
 283            To compile this driver as a module, choose M here: the module will
 284            be called iguanair.
 285
 286 config IR_TTUSBIR
 287         tristate "TechnoTrend USB IR Receiver"
 288         depends on USB_ARCH_HAS_HCD
 289         depends on RC_CORE
 290         select USB
 291         select NEW_LEDS
 292         select LEDS_CLASS
 293         ---help---
 294            Say Y here if you want to use the TechnoTrend USB IR Receiver. The
 295            driver can control the led.
 296
 297            To compile this driver as a module, choose M here: the module will
 298            be called ttusbir.
 299
 300 config IR_RX51
 301         tristate "Nokia N900 IR transmitter diode"
 302         depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
 303         ---help---
 304            Say Y or M here if you want to enable support for the IR
 305            transmitter diode built in the Nokia N900 (RX51) device.
 306
 307            The driver uses omap DM timers for generating the carrier
 308            wave and pulses.
 309
 310 source "drivers/media/rc/img-ir/Kconfig"
 311
 312 config RC_LOOPBACK
 313         tristate "Remote Control Loopback Driver"
 314         depends on RC_CORE
 315         ---help---
 316            Say Y here if you want support for the remote control loopback
 317            driver which allows TX data to be sent back as RX data.
 318            This is mostly useful for debugging purposes.
 319
 320            If you're not sure, select N here.
 321
 322            To compile this driver as a module, choose M here: the module will
 323            be called rc_loopback.
 324
 325 config IR_GPIO_CIR
 326         tristate "GPIO IR remote control"
 327         depends on RC_CORE
 328         ---help---
 329            Say Y if you want to use GPIO based IR Receiver.
 330
 331            To compile this driver as a module, choose M here: the module will
 332            be called gpio-ir-recv.
 333
 334 config RC_ST
 335         tristate "ST remote control receiver"
 336         depends on ARCH_STI && RC_CORE
 337         help
 338          Say Y here if you want support for ST remote control driver
 339          which allows both IR and UHF RX.
 340          The driver passes raw pulse and space information to the LIRC decoder.
 341
 342          If you're not sure, select N here.
 343
 344 config IR_SUNXI
 345     tristate "SUNXI IR remote control"
 346     depends on RC_CORE
 347     depends on ARCH_SUNXI
 348     ---help---
 349       Say Y if you want to use sunXi internal IR Controller
 350
 351       To compile this driver as a module, choose M here: the module will
 352       be called sunxi-ir.
 353
 354 endif #RC_DEVICES