drivers/media/rc/Kconfig

   1 config RC_CORE
   2         tristate
   3         depends on MEDIA_RC_SUPPORT
   4         depends on INPUT
   5         default y
   6
   7 source "drivers/media/rc/keymaps/Kconfig"
   8
   9 menuconfig RC_DECODERS
  10         bool "Remote controller decoders"
  11         depends on RC_CORE
  12         default y
  13
  14 if RC_DECODERS
  15 config LIRC
  16         tristate "LIRC interface driver"
  17         depends on RC_CORE
  18
  19         ---help---
  20            Enable this option to build the Linux Infrared Remote
  21            Control (LIRC) core device interface driver. The LIRC
  22            interface passes raw IR to and from userspace, where the
  23            LIRC daemon handles protocol decoding for IR reception and
  24            encoding for IR transmitting (aka "blasting").
  25
  26 config IR_LIRC_CODEC
  27         tristate "Enable IR to LIRC bridge"
  28         depends on RC_CORE
  29         depends on LIRC
  30         default y
  31
  32         ---help---
  33            Enable this option to pass raw IR to and from userspace via
  34            the LIRC interface.
  35
  36
  37 config IR_NEC_DECODER
  38         tristate "Enable IR raw decoder for the NEC protocol"
  39         depends on RC_CORE
  40         select BITREVERSE
  41         default y
  42
  43         ---help---
  44            Enable this option if you have IR with NEC protocol, and
  45            if the IR is decoded in software
  46
  47 config IR_RC5_DECODER
  48         tristate "Enable IR raw decoder for the RC-5 protocol"
  49         depends on RC_CORE
  50         select BITREVERSE
  51         default y
  52
  53         ---help---
  54            Enable this option if you have IR with RC-5 protocol, and
  55            if the IR is decoded in software
  56
  57 config IR_RC6_DECODER
  58         tristate "Enable IR raw decoder for the RC6 protocol"
  59         depends on RC_CORE
  60         select BITREVERSE
  61         default y
  62
  63         ---help---
  64            Enable this option if you have an infrared remote control which
  65            uses the RC6 protocol, and you need software decoding support.
  66
  67 config IR_JVC_DECODER
  68         tristate "Enable IR raw decoder for the JVC protocol"
  69         depends on RC_CORE
  70         select BITREVERSE
  71         default y
  72
  73         ---help---
  74            Enable this option if you have an infrared remote control which
  75            uses the JVC protocol, and you need software decoding support.
  76
  77 config IR_SONY_DECODER
  78         tristate "Enable IR raw decoder for the Sony protocol"
  79         depends on RC_CORE
  80         select BITREVERSE
  81         default y
  82
  83         ---help---
  84            Enable this option if you have an infrared remote control which
  85            uses the Sony protocol, and you need software decoding support.
  86
  87 config IR_RC5_SZ_DECODER
  88         tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
  89         depends on RC_CORE
  90         select BITREVERSE
  91         default y
  92
  93         ---help---
  94            Enable this option if you have IR with RC-5 (streamzap) protocol,
  95            and if the IR is decoded in software. (The Streamzap PC Remote
  96            uses an IR protocol that is almost standard RC-5, but not quite,
  97            as it uses an additional bit).
  98
  99 config IR_SANYO_DECODER
 100         tristate "Enable IR raw decoder for the Sanyo protocol"
 101         depends on RC_CORE
 102         default y
 103
 104         ---help---
 105            Enable this option if you have an infrared remote control which
 106            uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
 107            and you need software decoding support.
 108
 109 config IR_SHARP_DECODER
 110         tristate "Enable IR raw decoder for the Sharp protocol"
 111         depends on RC_CORE
 112         default y
 113
 114         ---help---
 115            Enable this option if you have an infrared remote control which
 116            uses the Sharp protocol, and you need software decoding support.
 117
 118 config IR_MCE_KBD_DECODER
 119         tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
 120         depends on RC_CORE
 121         select BITREVERSE
 122         default y
 123
 124         ---help---
 125            Enable this option if you have a Microsoft Remote Keyboard for
 126            Windows Media Center Edition, which you would like to use with
 127            a raw IR receiver in your system.
 128 endif #RC_DECODERS
 129
 130 menuconfig RC_DEVICES
 131         bool "Remote Controller devices"
 132         depends on RC_CORE
 133
 134 if RC_DEVICES
 135
 136 config RC_ATI_REMOTE
 137         tristate "ATI / X10 based USB RF remote controls"
 138         depends on USB_ARCH_HAS_HCD
 139         depends on RC_CORE
 140         select USB
 141         help
 142            Say Y here if you want to use an X10 based USB remote control.
 143            These are RF remotes with USB receivers.
 144
 145            Such devices include the ATI remote that comes with many of ATI's
 146            All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
 147            Medion RF remote, and SnapStream FireFly remote.
 148
 149            This driver provides mouse pointer, left and right mouse buttons,
 150            and maps all the other remote buttons to keypress events.
 151
 152            To compile this driver as a module, choose M here: the module will be
 153            called ati_remote.
 154
 155 config IR_ENE
 156         tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 157         depends on PNP
 158         depends on RC_CORE
 159         ---help---
 160            Say Y here to enable support for integrated infrared receiver
 161            /transceiver made by ENE.
 162
 163            You can see if you have it by looking at lspnp output.
 164            Output should include ENE0100 ENE0200 or something similar.
 165
 166            To compile this driver as a module, choose M here: the
 167            module will be called ene_ir.
 168
 169 config IR_IMON
 170         tristate "SoundGraph iMON Receiver and Display"
 171         depends on USB_ARCH_HAS_HCD
 172         depends on RC_CORE
 173         select USB
 174         ---help---
 175            Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
 176            IR Receiver and/or LCD/VFD/VGA display.
 177
 178            To compile this driver as a module, choose M here: the
 179            module will be called imon.
 180
 181 config IR_MCEUSB
 182         tristate "Windows Media Center Ed. eHome Infrared Transceiver"
 183         depends on USB_ARCH_HAS_HCD
 184         depends on RC_CORE
 185         select USB
 186         ---help---
 187            Say Y here if you want to use a Windows Media Center Edition
 188            eHome Infrared Transceiver.
 189
 190            To compile this driver as a module, choose M here: the
 191            module will be called mceusb.
 192
 193 config IR_ITE_CIR
 194         tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
 195         depends on PNP
 196         depends on RC_CORE
 197         ---help---
 198            Say Y here to enable support for integrated infrared receivers
 199            /transceivers made by ITE Tech Inc. These are found in
 200            several ASUS devices, like the ASUS Digimatrix or the ASUS
 201            EEEBox 1501U.
 202
 203            To compile this driver as a module, choose M here: the
 204            module will be called ite-cir.
 205
 206 config IR_FINTEK
 207         tristate "Fintek Consumer Infrared Transceiver"
 208         depends on PNP
 209         depends on RC_CORE
 210         ---help---
 211            Say Y here to enable support for integrated infrared receiver
 212            /transciever made by Fintek. This chip is found on assorted
 213            Jetway motherboards (and of course, possibly others).
 214
 215            To compile this driver as a module, choose M here: the
 216            module will be called fintek-cir.
 217
 218 config IR_NUVOTON
 219         tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 220         depends on PNP
 221         depends on RC_CORE
 222         ---help---
 223            Say Y here to enable support for integrated infrared receiver
 224            /transciever made by Nuvoton (formerly Winbond). This chip is
 225            found in the ASRock ION 330HT, as well as assorted Intel
 226            DP55-series motherboards (and of course, possibly others).
 227
 228            To compile this driver as a module, choose M here: the
 229            module will be called nuvoton-cir.
 230
 231 config IR_REDRAT3
 232         tristate "RedRat3 IR Transceiver"
 233         depends on USB_ARCH_HAS_HCD
 234         depends on RC_CORE
 235         select NEW_LEDS
 236         select LEDS_CLASS
 237         select USB
 238         ---help---
 239            Say Y here if you want to use a RedRat3 Infrared Transceiver.
 240
 241            To compile this driver as a module, choose M here: the
 242            module will be called redrat3.
 243
 244 config IR_STREAMZAP
 245         tristate "Streamzap PC Remote IR Receiver"
 246         depends on USB_ARCH_HAS_HCD
 247         depends on RC_CORE
 248         select USB
 249         ---help---
 250            Say Y here if you want to use a Streamzap PC Remote
 251            Infrared Receiver.
 252
 253            To compile this driver as a module, choose M here: the
 254            module will be called streamzap.
 255
 256 config IR_WINBOND_CIR
 257         tristate "Winbond IR remote control"
 258         depends on X86 && PNP
 259         depends on RC_CORE
 260         select NEW_LEDS
 261         select LEDS_CLASS
 262         select BITREVERSE
 263         ---help---
 264            Say Y here if you want to use the IR remote functionality found
 265            in some Winbond SuperI/O chips. Currently only the WPCD376I
 266            chip is supported (included in some Intel Media series
 267            motherboards).
 268
 269            To compile this driver as a module, choose M here: the module will
 270            be called winbond_cir.
 271
 272 config IR_IGUANA
 273         tristate "IguanaWorks USB IR Transceiver"
 274         depends on USB_ARCH_HAS_HCD
 275         depends on RC_CORE
 276         select USB
 277         ---help---
 278            Say Y here if you want to use the IguanaWorks USB IR Transceiver.
 279            Both infrared receive and send are supported. If you want to
 280            change the ID or the pin config, use the user space driver from
 281            IguanaWorks.
 282
 283            Only firmware 0x0205 and later is supported.
 284
 285            To compile this driver as a module, choose M here: the module will
 286            be called iguanair.
 287
 288 config IR_TTUSBIR
 289         tristate "TechnoTrend USB IR Receiver"
 290         depends on USB_ARCH_HAS_HCD
 291         depends on RC_CORE
 292         select USB
 293         select NEW_LEDS
 294         select LEDS_CLASS
 295         ---help---
 296            Say Y here if you want to use the TechnoTrend USB IR Receiver. The
 297            driver can control the led.
 298
 299            To compile this driver as a module, choose M here: the module will
 300            be called ttusbir.
 301
 302 config IR_RX51
 303         tristate "Nokia N900 IR transmitter diode"
 304         depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
 305         ---help---
 306            Say Y or M here if you want to enable support for the IR
 307            transmitter diode built in the Nokia N900 (RX51) device.
 308
 309            The driver uses omap DM timers for generating the carrier
 310            wave and pulses.
 311
 312 source "drivers/media/rc/img-ir/Kconfig"
 313
 314 config RC_LOOPBACK
 315         tristate "Remote Control Loopback Driver"
 316         depends on RC_CORE
 317         ---help---
 318            Say Y here if you want support for the remote control loopback
 319            driver which allows TX data to be sent back as RX data.
 320            This is mostly useful for debugging purposes.
 321
 322            If you're not sure, select N here.
 323
 324            To compile this driver as a module, choose M here: the module will
 325            be called rc_loopback.
 326
 327 config IR_GPIO_CIR
 328         tristate "GPIO IR remote control"
 329         depends on RC_CORE
 330         ---help---
 331            Say Y if you want to use GPIO based IR Receiver.
 332
 333            To compile this driver as a module, choose M here: the module will
 334            be called gpio-ir-recv.
 335
 336 config RC_ST
 337         tristate "ST remote control receiver"
 338         depends on ARCH_STI && RC_CORE
 339         help
 340          Say Y here if you want support for ST remote control driver
 341          which allows both IR and UHF RX.
 342          The driver passes raw pulse and space information to the LIRC decoder.
 343
 344          If you're not sure, select N here.
 345
 346 endif #RC_DEVICES