]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/media/rc/nuvoton-cir.h
HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch
[mirror_ubuntu-artful-kernel.git] / drivers / media / rc / nuvoton-cir.h
1 /*
2 * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
3 *
4 * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
5 * Copyright (C) 2009 Nuvoton PS Team
6 *
7 * Special thanks to Nuvoton for providing hardware, spec sheets and
8 * sample code upon which portions of this driver are based. Indirect
9 * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
10 * modeled after.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of the
15 * License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful, but
18 * WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
25 * USA
26 */
27
28 #include <linux/spinlock.h>
29 #include <linux/ioctl.h>
30
31 /* platform driver name to register */
32 #define NVT_DRIVER_NAME "nuvoton-cir"
33
34 /* debugging module parameter */
35 static int debug;
36
37
38 #define nvt_dbg(text, ...) \
39 if (debug) \
40 printk(KERN_DEBUG \
41 KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
42
43 #define nvt_dbg_verbose(text, ...) \
44 if (debug > 1) \
45 printk(KERN_DEBUG \
46 KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
47
48 #define nvt_dbg_wake(text, ...) \
49 if (debug > 2) \
50 printk(KERN_DEBUG \
51 KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
52
53
54 /*
55 * Original lirc driver said min value of 76, and recommended value of 256
56 * for the buffer length, but then used 2048. Never mind that the size of the
57 * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm
58 * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes),
59 * and I don't have TX-capable hardware to test/debug on...
60 */
61 #define TX_BUF_LEN 256
62 #define RX_BUF_LEN 32
63
64 #define SIO_ID_MASK 0xfff0
65
66 enum nvt_chip_ver {
67 NVT_UNKNOWN = 0,
68 NVT_W83667HG = 0xa510,
69 NVT_6775F = 0xb470,
70 NVT_6776F = 0xc330,
71 NVT_6779D = 0xc560,
72 NVT_INVALID = 0xffff,
73 };
74
75 struct nvt_chip {
76 const char *name;
77 enum nvt_chip_ver chip_ver;
78 };
79
80 struct nvt_dev {
81 struct rc_dev *rdev;
82
83 spinlock_t lock;
84
85 /* for rx */
86 u8 buf[RX_BUF_LEN];
87 unsigned int pkts;
88
89 struct {
90 u8 buf[TX_BUF_LEN];
91 unsigned int buf_count;
92 unsigned int cur_buf_num;
93 wait_queue_head_t queue;
94 u8 tx_state;
95 } tx;
96
97 /* EFER Config register index/data pair */
98 u32 cr_efir;
99 u32 cr_efdr;
100
101 /* hardware I/O settings */
102 unsigned long cir_addr;
103 unsigned long cir_wake_addr;
104 int cir_irq;
105
106 enum nvt_chip_ver chip_ver;
107 /* hardware id */
108 u8 chip_major;
109 u8 chip_minor;
110
111 /* hardware features */
112 bool hw_tx_capable;
113
114 /* carrier period = 1 / frequency */
115 u32 carrier;
116 };
117
118 /* send states */
119 #define ST_TX_NONE 0x0
120 #define ST_TX_REQUEST 0x2
121 #define ST_TX_REPLY 0x4
122
123 /* buffer packet constants */
124 #define BUF_PULSE_BIT 0x80
125 #define BUF_LEN_MASK 0x7f
126 #define BUF_REPEAT_BYTE 0x70
127 #define BUF_REPEAT_MASK 0xf0
128
129 /* CIR settings */
130
131 /* total length of CIR and CIR WAKE */
132 #define CIR_IOREG_LENGTH 0x0f
133
134 /* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL */
135 #define CIR_RX_LIMIT_COUNT (IR_DEFAULT_TIMEOUT / US_TO_NS(SAMPLE_PERIOD))
136
137 /* CIR Regs */
138 #define CIR_IRCON 0x00
139 #define CIR_IRSTS 0x01
140 #define CIR_IREN 0x02
141 #define CIR_RXFCONT 0x03
142 #define CIR_CP 0x04
143 #define CIR_CC 0x05
144 #define CIR_SLCH 0x06
145 #define CIR_SLCL 0x07
146 #define CIR_FIFOCON 0x08
147 #define CIR_IRFIFOSTS 0x09
148 #define CIR_SRXFIFO 0x0a
149 #define CIR_TXFCONT 0x0b
150 #define CIR_STXFIFO 0x0c
151 #define CIR_FCCH 0x0d
152 #define CIR_FCCL 0x0e
153 #define CIR_IRFSM 0x0f
154
155 /* CIR IRCON settings */
156 #define CIR_IRCON_RECV 0x80
157 #define CIR_IRCON_WIREN 0x40
158 #define CIR_IRCON_TXEN 0x20
159 #define CIR_IRCON_RXEN 0x10
160 #define CIR_IRCON_WRXINV 0x08
161 #define CIR_IRCON_RXINV 0x04
162
163 #define CIR_IRCON_SAMPLE_PERIOD_SEL_1 0x00
164 #define CIR_IRCON_SAMPLE_PERIOD_SEL_25 0x01
165 #define CIR_IRCON_SAMPLE_PERIOD_SEL_50 0x02
166 #define CIR_IRCON_SAMPLE_PERIOD_SEL_100 0x03
167
168 /* FIXME: make this a runtime option */
169 /* select sample period as 50us */
170 #define CIR_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50
171
172 /* CIR IRSTS settings */
173 #define CIR_IRSTS_RDR 0x80
174 #define CIR_IRSTS_RTR 0x40
175 #define CIR_IRSTS_PE 0x20
176 #define CIR_IRSTS_RFO 0x10
177 #define CIR_IRSTS_TE 0x08
178 #define CIR_IRSTS_TTR 0x04
179 #define CIR_IRSTS_TFU 0x02
180 #define CIR_IRSTS_GH 0x01
181
182 /* CIR IREN settings */
183 #define CIR_IREN_RDR 0x80
184 #define CIR_IREN_RTR 0x40
185 #define CIR_IREN_PE 0x20
186 #define CIR_IREN_RFO 0x10
187 #define CIR_IREN_TE 0x08
188 #define CIR_IREN_TTR 0x04
189 #define CIR_IREN_TFU 0x02
190 #define CIR_IREN_GH 0x01
191
192 /* CIR FIFOCON settings */
193 #define CIR_FIFOCON_TXFIFOCLR 0x80
194
195 #define CIR_FIFOCON_TX_TRIGGER_LEV_31 0x00
196 #define CIR_FIFOCON_TX_TRIGGER_LEV_24 0x10
197 #define CIR_FIFOCON_TX_TRIGGER_LEV_16 0x20
198 #define CIR_FIFOCON_TX_TRIGGER_LEV_8 0x30
199
200 /* FIXME: make this a runtime option */
201 /* select TX trigger level as 16 */
202 #define CIR_FIFOCON_TX_TRIGGER_LEV CIR_FIFOCON_TX_TRIGGER_LEV_16
203
204 #define CIR_FIFOCON_RXFIFOCLR 0x08
205
206 #define CIR_FIFOCON_RX_TRIGGER_LEV_1 0x00
207 #define CIR_FIFOCON_RX_TRIGGER_LEV_8 0x01
208 #define CIR_FIFOCON_RX_TRIGGER_LEV_16 0x02
209 #define CIR_FIFOCON_RX_TRIGGER_LEV_24 0x03
210
211 /* FIXME: make this a runtime option */
212 /* select RX trigger level as 24 */
213 #define CIR_FIFOCON_RX_TRIGGER_LEV CIR_FIFOCON_RX_TRIGGER_LEV_24
214
215 /* CIR IRFIFOSTS settings */
216 #define CIR_IRFIFOSTS_IR_PENDING 0x80
217 #define CIR_IRFIFOSTS_RX_GS 0x40
218 #define CIR_IRFIFOSTS_RX_FTA 0x20
219 #define CIR_IRFIFOSTS_RX_EMPTY 0x10
220 #define CIR_IRFIFOSTS_RX_FULL 0x08
221 #define CIR_IRFIFOSTS_TX_FTA 0x04
222 #define CIR_IRFIFOSTS_TX_EMPTY 0x02
223 #define CIR_IRFIFOSTS_TX_FULL 0x01
224
225
226 /* CIR WAKE UP Regs */
227 #define CIR_WAKE_IRCON 0x00
228 #define CIR_WAKE_IRSTS 0x01
229 #define CIR_WAKE_IREN 0x02
230 #define CIR_WAKE_FIFO_CMP_DEEP 0x03
231 #define CIR_WAKE_FIFO_CMP_TOL 0x04
232 #define CIR_WAKE_FIFO_COUNT 0x05
233 #define CIR_WAKE_SLCH 0x06
234 #define CIR_WAKE_SLCL 0x07
235 #define CIR_WAKE_FIFOCON 0x08
236 #define CIR_WAKE_SRXFSTS 0x09
237 #define CIR_WAKE_SAMPLE_RX_FIFO 0x0a
238 #define CIR_WAKE_WR_FIFO_DATA 0x0b
239 #define CIR_WAKE_RD_FIFO_ONLY 0x0c
240 #define CIR_WAKE_RD_FIFO_ONLY_IDX 0x0d
241 #define CIR_WAKE_FIFO_IGNORE 0x0e
242 #define CIR_WAKE_IRFSM 0x0f
243
244 /* CIR WAKE UP IRCON settings */
245 #define CIR_WAKE_IRCON_DEC_RST 0x80
246 #define CIR_WAKE_IRCON_MODE1 0x40
247 #define CIR_WAKE_IRCON_MODE0 0x20
248 #define CIR_WAKE_IRCON_RXEN 0x10
249 #define CIR_WAKE_IRCON_R 0x08
250 #define CIR_WAKE_IRCON_RXINV 0x04
251
252 /* FIXME/jarod: make this a runtime option */
253 /* select a same sample period like cir register */
254 #define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50
255
256 /* CIR WAKE IRSTS Bits */
257 #define CIR_WAKE_IRSTS_RDR 0x80
258 #define CIR_WAKE_IRSTS_RTR 0x40
259 #define CIR_WAKE_IRSTS_PE 0x20
260 #define CIR_WAKE_IRSTS_RFO 0x10
261 #define CIR_WAKE_IRSTS_GH 0x08
262 #define CIR_WAKE_IRSTS_IR_PENDING 0x01
263
264 /* CIR WAKE UP IREN Bits */
265 #define CIR_WAKE_IREN_RDR 0x80
266 #define CIR_WAKE_IREN_RTR 0x40
267 #define CIR_WAKE_IREN_PE 0x20
268 #define CIR_WAKE_IREN_RFO 0x10
269 #define CIR_WAKE_IREN_GH 0x08
270
271 /* CIR WAKE FIFOCON settings */
272 #define CIR_WAKE_FIFOCON_RXFIFOCLR 0x08
273
274 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 0x00
275 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66 0x01
276 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65 0x02
277 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64 0x03
278
279 /* FIXME: make this a runtime option */
280 /* select WAKE UP RX trigger level as 67 */
281 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67
282
283 /* CIR WAKE SRXFSTS settings */
284 #define CIR_WAKE_IRFIFOSTS_RX_GS 0x80
285 #define CIR_WAKE_IRFIFOSTS_RX_FTA 0x40
286 #define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20
287 #define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10
288
289 /*
290 * The CIR Wake FIFO buffer is 67 bytes long, but the stock remote wakes
291 * the system comparing only 65 bytes (fails with this set to 67)
292 */
293 #define CIR_WAKE_FIFO_CMP_BYTES 65
294 /* CIR Wake byte comparison tolerance */
295 #define CIR_WAKE_CMP_TOLERANCE 5
296
297 /*
298 * Extended Function Enable Registers:
299 * Extended Function Index Register
300 * Extended Function Data Register
301 */
302 #define CR_EFIR 0x2e
303 #define CR_EFDR 0x2f
304
305 /* Possible alternate EFER values, depends on how the chip is wired */
306 #define CR_EFIR2 0x4e
307 #define CR_EFDR2 0x4f
308
309 /* Extended Function Mode enable/disable magic values */
310 #define EFER_EFM_ENABLE 0x87
311 #define EFER_EFM_DISABLE 0xaa
312
313 /* Config regs we need to care about */
314 #define CR_SOFTWARE_RESET 0x02
315 #define CR_LOGICAL_DEV_SEL 0x07
316 #define CR_CHIP_ID_HI 0x20
317 #define CR_CHIP_ID_LO 0x21
318 #define CR_DEV_POWER_DOWN 0x22 /* bit 2 is CIR power, default power on */
319 #define CR_OUTPUT_PIN_SEL 0x27
320 #define CR_MULTIFUNC_PIN_SEL 0x2c
321 #define CR_LOGICAL_DEV_EN 0x30 /* valid for all logical devices */
322 /* next three regs valid for both the CIR and CIR_WAKE logical devices */
323 #define CR_CIR_BASE_ADDR_HI 0x60
324 #define CR_CIR_BASE_ADDR_LO 0x61
325 #define CR_CIR_IRQ_RSRC 0x70
326 /* next three regs valid only for ACPI logical dev */
327 #define CR_ACPI_CIR_WAKE 0xe0
328 #define CR_ACPI_IRQ_EVENTS 0xf6
329 #define CR_ACPI_IRQ_EVENTS2 0xf7
330
331 /* Logical devices that we need to care about */
332 #define LOGICAL_DEV_LPT 0x01
333 #define LOGICAL_DEV_CIR 0x06
334 #define LOGICAL_DEV_ACPI 0x0a
335 #define LOGICAL_DEV_CIR_WAKE 0x0e
336
337 #define LOGICAL_DEV_DISABLE 0x00
338 #define LOGICAL_DEV_ENABLE 0x01
339
340 #define CIR_WAKE_ENABLE_BIT 0x08
341 #define PME_INTR_CIR_PASS_BIT 0x08
342
343 /* w83677hg CIR pin config */
344 #define OUTPUT_PIN_SEL_MASK 0xbc
345 #define OUTPUT_ENABLE_CIR 0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */
346 #define OUTPUT_ENABLE_CIRWB 0x40 /* enable wide-band sensor */
347
348 /* w83667hg CIR pin config */
349 #define MULTIFUNC_PIN_SEL_MASK 0x1f
350 #define MULTIFUNC_ENABLE_CIR 0x80 /* Pin75=CIRRX, Pin76=CIRTX1 */
351 #define MULTIFUNC_ENABLE_CIRWB 0x20 /* enable wide-band sensor */
352
353 /* MCE CIR signal length, related on sample period */
354
355 /* MCE CIR controller signal length: about 43ms
356 * 43ms / 50us (sample period) * 0.85 (inaccuracy)
357 */
358 #define CONTROLLER_BUF_LEN_MIN 830
359
360 /* MCE CIR keyboard signal length: about 26ms
361 * 26ms / 50us (sample period) * 0.85 (inaccuracy)
362 */
363 #define KEYBOARD_BUF_LEN_MAX 650
364 #define KEYBOARD_BUF_LEN_MIN 610
365
366 /* MCE CIR mouse signal length: about 24ms
367 * 24ms / 50us (sample period) * 0.85 (inaccuracy)
368 */
369 #define MOUSE_BUF_LEN_MIN 565
370
371 #define CIR_SAMPLE_PERIOD 50
372 #define CIR_SAMPLE_LOW_INACCURACY 0.85
373
374 /* MAX silence time that driver will sent to lirc */
375 #define MAX_SILENCE_TIME 60000
376
377 #if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100
378 #define SAMPLE_PERIOD 100
379
380 #elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50
381 #define SAMPLE_PERIOD 50
382
383 #elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25
384 #define SAMPLE_PERIOD 25
385
386 #else
387 #define SAMPLE_PERIOD 1
388 #endif
389
390 /* as VISTA MCE definition, valid carrier value */
391 #define MAX_CARRIER 60000
392 #define MIN_CARRIER 30000
393
394 /* max wakeup sequence length */
395 #define WAKEUP_MAX_SIZE 65