drivers/media/tuners/fc0011.c

   1 /*
   2  * Fitipower FC0011 tuner driver
   3  *
   4  * Copyright (C) 2012 Michael Buesch <m@bues.ch>
   5  *
   6  * Derived from FC0012 tuner driver:
   7  * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  */
  19
  20 #include "fc0011.h"
  21
  22
  23 /* Tuner registers */
  24 enum {
  25         FC11_REG_0,
  26         FC11_REG_FA,            /* FA */
  27         FC11_REG_FP,            /* FP */
  28         FC11_REG_XINHI,         /* XIN high 8 bit */
  29         FC11_REG_XINLO,         /* XIN low 8 bit */
  30         FC11_REG_VCO,           /* VCO */
  31         FC11_REG_VCOSEL,        /* VCO select */
  32         FC11_REG_7,             /* Unknown tuner reg 7 */
  33         FC11_REG_8,             /* Unknown tuner reg 8 */
  34         FC11_REG_9,
  35         FC11_REG_10,            /* Unknown tuner reg 10 */
  36         FC11_REG_11,            /* Unknown tuner reg 11 */
  37         FC11_REG_12,
  38         FC11_REG_RCCAL,         /* RC calibrate */
  39         FC11_REG_VCOCAL,        /* VCO calibrate */
  40         FC11_REG_15,
  41         FC11_REG_16,            /* Unknown tuner reg 16 */
  42         FC11_REG_17,
  43
  44         FC11_NR_REGS,           /* Number of registers */
  45 };
  46
  47 enum FC11_REG_VCOSEL_bits {
  48         FC11_VCOSEL_2           = 0x08, /* VCO select 2 */
  49         FC11_VCOSEL_1           = 0x10, /* VCO select 1 */
  50         FC11_VCOSEL_CLKOUT      = 0x20, /* Fix clock out */
  51         FC11_VCOSEL_BW7M        = 0x40, /* 7MHz bw */
  52         FC11_VCOSEL_BW6M        = 0x80, /* 6MHz bw */
  53 };
  54
  55 enum FC11_REG_RCCAL_bits {
  56         FC11_RCCAL_FORCE        = 0x10, /* force */
  57 };
  58
  59 enum FC11_REG_VCOCAL_bits {
  60         FC11_VCOCAL_RUN         = 0,    /* VCO calibration run */
  61         FC11_VCOCAL_VALUEMASK   = 0x3F, /* VCO calibration value mask */
  62         FC11_VCOCAL_OK          = 0x40, /* VCO calibration Ok */
  63         FC11_VCOCAL_RESET       = 0x80, /* VCO calibration reset */
  64 };
  65
  66
  67 struct fc0011_priv {
  68         struct i2c_adapter *i2c;
  69         u8 addr;
  70
  71         u32 frequency;
  72         u32 bandwidth;
  73 };
  74
  75
  76 static int fc0011_writereg(struct fc0011_priv *priv, u8 reg, u8 val)
  77 {
  78         u8 buf[2] = { reg, val };
  79         struct i2c_msg msg = { .addr = priv->addr,
  80                 .flags = 0, .buf = buf, .len = 2 };
  81
  82         if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
  83                 dev_err(&priv->i2c->dev,
  84                         "I2C write reg failed, reg: %02x, val: %02x\n",
  85                         reg, val);
  86                 return -EIO;
  87         }
  88
  89         return 0;
  90 }
  91
  92 static int fc0011_readreg(struct fc0011_priv *priv, u8 reg, u8 *val)
  93 {
  94         u8 dummy;
  95         struct i2c_msg msg[2] = {
  96                 { .addr = priv->addr,
  97                   .flags = 0, .buf = &reg, .len = 1 },
  98                 { .addr = priv->addr,
  99                   .flags = I2C_M_RD, .buf = val ? : &dummy, .len = 1 },
 100         };
 101
 102         if (i2c_transfer(priv->i2c, msg, 2) != 2) {
 103                 dev_err(&priv->i2c->dev,
 104                         "I2C read failed, reg: %02x\n", reg);
 105                 return -EIO;
 106         }
 107
 108         return 0;
 109 }
 110
 111 static void fc0011_release(struct dvb_frontend *fe)
 112 {
 113         kfree(fe->tuner_priv);
 114         fe->tuner_priv = NULL;
 115 }
 116
 117 static int fc0011_init(struct dvb_frontend *fe)
 118 {
 119         struct fc0011_priv *priv = fe->tuner_priv;
 120         int err;
 121
 122         if (WARN_ON(!fe->callback))
 123                 return -EINVAL;
 124
 125         err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
 126                            FC0011_FE_CALLBACK_POWER, priv->addr);
 127         if (err) {
 128                 dev_err(&priv->i2c->dev, "Power-on callback failed\n");
 129                 return err;
 130         }
 131         err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
 132                            FC0011_FE_CALLBACK_RESET, priv->addr);
 133         if (err) {
 134                 dev_err(&priv->i2c->dev, "Reset callback failed\n");
 135                 return err;
 136         }
 137
 138         return 0;
 139 }
 140
 141 /* Initiate VCO calibration */
 142 static int fc0011_vcocal_trigger(struct fc0011_priv *priv)
 143 {
 144         int err;
 145
 146         err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RESET);
 147         if (err)
 148                 return err;
 149         err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
 150         if (err)
 151                 return err;
 152
 153         return 0;
 154 }
 155
 156 /* Read VCO calibration value */
 157 static int fc0011_vcocal_read(struct fc0011_priv *priv, u8 *value)
 158 {
 159         int err;
 160
 161         err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
 162         if (err)
 163                 return err;
 164         usleep_range(10000, 20000);
 165         err = fc0011_readreg(priv, FC11_REG_VCOCAL, value);
 166         if (err)
 167                 return err;
 168
 169         return 0;
 170 }
 171
 172 static int fc0011_set_params(struct dvb_frontend *fe)
 173 {
 174         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 175         struct fc0011_priv *priv = fe->tuner_priv;
 176         int err;
 177         unsigned int i, vco_retries;
 178         u32 freq = p->frequency / 1000;
 179         u32 bandwidth = p->bandwidth_hz / 1000;
 180         u32 fvco, xin, frac, xdiv, xdivr;
 181         u8 fa, fp, vco_sel, vco_cal;
 182         u8 regs[FC11_NR_REGS] = { };
 183
 184         regs[FC11_REG_7] = 0x0F;
 185         regs[FC11_REG_8] = 0x3E;
 186         regs[FC11_REG_10] = 0xB8;
 187         regs[FC11_REG_11] = 0x80;
 188         regs[FC11_REG_RCCAL] = 0x04;
 189         err = fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
 190         err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
 191         err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
 192         err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
 193         err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
 194         if (err)
 195                 return -EIO;
 196
 197         /* Set VCO freq and VCO div */
 198         if (freq < 54000) {
 199                 fvco = freq * 64;
 200                 regs[FC11_REG_VCO] = 0x82;
 201         } else if (freq < 108000) {
 202                 fvco = freq * 32;
 203                 regs[FC11_REG_VCO] = 0x42;
 204         } else if (freq < 216000) {
 205                 fvco = freq * 16;
 206                 regs[FC11_REG_VCO] = 0x22;
 207         } else if (freq < 432000) {
 208                 fvco = freq * 8;
 209                 regs[FC11_REG_VCO] = 0x12;
 210         } else {
 211                 fvco = freq * 4;
 212                 regs[FC11_REG_VCO] = 0x0A;
 213         }
 214
 215         /* Calc XIN. The PLL reference frequency is 18 MHz. */
 216         xdiv = fvco / 18000;
 217         WARN_ON(xdiv > 0xFF);
 218         frac = fvco - xdiv * 18000;
 219         frac = (frac << 15) / 18000;
 220         if (frac >= 16384)
 221                 frac += 32786;
 222         if (!frac)
 223                 xin = 0;
 224         else
 225                 xin = clamp_t(u32, frac, 512, 65024);
 226         regs[FC11_REG_XINHI] = xin >> 8;
 227         regs[FC11_REG_XINLO] = xin;
 228
 229         /* Calc FP and FA */
 230         xdivr = xdiv;
 231         if (fvco - xdiv * 18000 >= 9000)
 232                 xdivr += 1; /* round */
 233         fp = xdivr / 8;
 234         fa = xdivr - fp * 8;
 235         if (fa < 2) {
 236                 fp -= 1;
 237                 fa += 8;
 238         }
 239         if (fp > 0x1F) {
 240                 fp = 0x1F;
 241                 fa = 0xF;
 242         }
 243         if (fa >= fp) {
 244                 dev_warn(&priv->i2c->dev,
 245                          "fa %02X >= fp %02X, but trying to continue\n",
 246                          (unsigned int)(u8)fa, (unsigned int)(u8)fp);
 247         }
 248         regs[FC11_REG_FA] = fa;
 249         regs[FC11_REG_FP] = fp;
 250
 251         /* Select bandwidth */
 252         switch (bandwidth) {
 253         case 8000:
 254                 break;
 255         case 7000:
 256                 regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M;
 257                 break;
 258         default:
 259                 dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. Using 6000 kHz.\n",
 260                          bandwidth);
 261                 bandwidth = 6000;
 262                 /* fallthrough */
 263         case 6000:
 264                 regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW6M;
 265                 break;
 266         }
 267
 268         /* Pre VCO select */
 269         if (fvco < 2320000) {
 270                 vco_sel = 0;
 271                 regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 272         } else if (fvco < 3080000) {
 273                 vco_sel = 1;
 274                 regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 275                 regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
 276         } else {
 277                 vco_sel = 2;
 278                 regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 279                 regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
 280         }
 281
 282         /* Fix for low freqs */
 283         if (freq < 45000) {
 284                 regs[FC11_REG_FA] = 0x6;
 285                 regs[FC11_REG_FP] = 0x11;
 286         }
 287
 288         /* Clock out fix */
 289         regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_CLKOUT;
 290
 291         /* Write the cached registers */
 292         for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) {
 293                 err = fc0011_writereg(priv, i, regs[i]);
 294                 if (err)
 295                         return err;
 296         }
 297
 298         /* VCO calibration */
 299         err = fc0011_vcocal_trigger(priv);
 300         if (err)
 301                 return err;
 302         err = fc0011_vcocal_read(priv, &vco_cal);
 303         if (err)
 304                 return err;
 305         vco_retries = 0;
 306         while (!(vco_cal & FC11_VCOCAL_OK) && vco_retries < 3) {
 307                 /* Reset the tuner and try again */
 308                 err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
 309                                    FC0011_FE_CALLBACK_RESET, priv->addr);
 310                 if (err) {
 311                         dev_err(&priv->i2c->dev, "Failed to reset tuner\n");
 312                         return err;
 313                 }
 314                 /* Reinit tuner config */
 315                 err = 0;
 316                 for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++)
 317                         err |= fc0011_writereg(priv, i, regs[i]);
 318                 err |= fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
 319                 err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
 320                 err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
 321                 err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
 322                 err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
 323                 if (err)
 324                         return -EIO;
 325                 /* VCO calibration */
 326                 err = fc0011_vcocal_trigger(priv);
 327                 if (err)
 328                         return err;
 329                 err = fc0011_vcocal_read(priv, &vco_cal);
 330                 if (err)
 331                         return err;
 332                 vco_retries++;
 333         }
 334         if (!(vco_cal & FC11_VCOCAL_OK)) {
 335                 dev_err(&priv->i2c->dev,
 336                         "Failed to read VCO calibration value (got %02X)\n",
 337                         (unsigned int)vco_cal);
 338                 return -EIO;
 339         }
 340         vco_cal &= FC11_VCOCAL_VALUEMASK;
 341
 342         switch (vco_sel) {
 343         default:
 344                 WARN_ON(1);
 345         case 0:
 346                 if (vco_cal < 8) {
 347                         regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 348                         regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
 349                         err = fc0011_writereg(priv, FC11_REG_VCOSEL,
 350                                               regs[FC11_REG_VCOSEL]);
 351                         if (err)
 352                                 return err;
 353                         err = fc0011_vcocal_trigger(priv);
 354                         if (err)
 355                                 return err;
 356                 } else {
 357                         regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 358                         err = fc0011_writereg(priv, FC11_REG_VCOSEL,
 359                                               regs[FC11_REG_VCOSEL]);
 360                         if (err)
 361                                 return err;
 362                 }
 363                 break;
 364         case 1:
 365                 if (vco_cal < 5) {
 366                         regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 367                         regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
 368                         err = fc0011_writereg(priv, FC11_REG_VCOSEL,
 369                                               regs[FC11_REG_VCOSEL]);
 370                         if (err)
 371                                 return err;
 372                         err = fc0011_vcocal_trigger(priv);
 373                         if (err)
 374                                 return err;
 375                 } else if (vco_cal <= 48) {
 376                         regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 377                         regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
 378                         err = fc0011_writereg(priv, FC11_REG_VCOSEL,
 379                                               regs[FC11_REG_VCOSEL]);
 380                         if (err)
 381                                 return err;
 382                 } else {
 383                         regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 384                         err = fc0011_writereg(priv, FC11_REG_VCOSEL,
 385                                               regs[FC11_REG_VCOSEL]);
 386                         if (err)
 387                                 return err;
 388                         err = fc0011_vcocal_trigger(priv);
 389                         if (err)
 390                                 return err;
 391                 }
 392                 break;
 393         case 2:
 394                 if (vco_cal > 53) {
 395                         regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 396                         regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
 397                         err = fc0011_writereg(priv, FC11_REG_VCOSEL,
 398                                               regs[FC11_REG_VCOSEL]);
 399                         if (err)
 400                                 return err;
 401                         err = fc0011_vcocal_trigger(priv);
 402                         if (err)
 403                                 return err;
 404                 } else {
 405                         regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
 406                         regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
 407                         err = fc0011_writereg(priv, FC11_REG_VCOSEL,
 408                                               regs[FC11_REG_VCOSEL]);
 409                         if (err)
 410                                 return err;
 411                 }
 412                 break;
 413         }
 414         err = fc0011_vcocal_read(priv, NULL);
 415         if (err)
 416                 return err;
 417         usleep_range(10000, 50000);
 418
 419         err = fc0011_readreg(priv, FC11_REG_RCCAL, &regs[FC11_REG_RCCAL]);
 420         if (err)
 421                 return err;
 422         regs[FC11_REG_RCCAL] |= FC11_RCCAL_FORCE;
 423         err = fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
 424         if (err)
 425                 return err;
 426         regs[FC11_REG_16] = 0xB;
 427         err = fc0011_writereg(priv, FC11_REG_16, regs[FC11_REG_16]);
 428         if (err)
 429                 return err;
 430
 431         dev_dbg(&priv->i2c->dev, "Tuned to fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X vcocal=%02X(%u) bw=%u\n",
 432                 (unsigned int)regs[FC11_REG_FA],
 433                 (unsigned int)regs[FC11_REG_FP],
 434                 (unsigned int)regs[FC11_REG_XINHI],
 435                 (unsigned int)regs[FC11_REG_XINLO],
 436                 (unsigned int)regs[FC11_REG_VCO],
 437                 (unsigned int)regs[FC11_REG_VCOSEL],
 438                 (unsigned int)vco_cal, vco_retries,
 439                 (unsigned int)bandwidth);
 440
 441         priv->frequency = p->frequency;
 442         priv->bandwidth = p->bandwidth_hz;
 443
 444         return 0;
 445 }
 446
 447 static int fc0011_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 448 {
 449         struct fc0011_priv *priv = fe->tuner_priv;
 450
 451         *frequency = priv->frequency;
 452
 453         return 0;
 454 }
 455
 456 static int fc0011_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
 457 {
 458         *frequency = 0;
 459
 460         return 0;
 461 }
 462
 463 static int fc0011_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 464 {
 465         struct fc0011_priv *priv = fe->tuner_priv;
 466
 467         *bandwidth = priv->bandwidth;
 468
 469         return 0;
 470 }
 471
 472 static const struct dvb_tuner_ops fc0011_tuner_ops = {
 473         .info = {
 474                 .name           = "Fitipower FC0011",
 475
 476                 .frequency_min  = 45000000,
 477                 .frequency_max  = 1000000000,
 478         },
 479
 480         .release                = fc0011_release,
 481         .init                   = fc0011_init,
 482
 483         .set_params             = fc0011_set_params,
 484
 485         .get_frequency          = fc0011_get_frequency,
 486         .get_if_frequency       = fc0011_get_if_frequency,
 487         .get_bandwidth          = fc0011_get_bandwidth,
 488 };
 489
 490 struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
 491                                    struct i2c_adapter *i2c,
 492                                    const struct fc0011_config *config)
 493 {
 494         struct fc0011_priv *priv;
 495
 496         priv = kzalloc(sizeof(struct fc0011_priv), GFP_KERNEL);
 497         if (!priv)
 498                 return NULL;
 499
 500         priv->i2c = i2c;
 501         priv->addr = config->i2c_address;
 502
 503         fe->tuner_priv = priv;
 504         fe->ops.tuner_ops = fc0011_tuner_ops;
 505
 506         dev_info(&priv->i2c->dev, "Fitipower FC0011 tuner attached\n");
 507
 508         return fe;
 509 }
 510 EXPORT_SYMBOL(fc0011_attach);
 511
 512 MODULE_DESCRIPTION("Fitipower FC0011 silicon tuner driver");
 513 MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
 514 MODULE_LICENSE("GPL");