drivers/media/tuners/fc0012.c

   1 /*
   2  * Fitipower FC0012 tuner driver
   3  *
   4  * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  */
  16
  17 #include "fc0012.h"
  18 #include "fc0012-priv.h"
  19
  20 static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val)
  21 {
  22         u8 buf[2] = {reg, val};
  23         struct i2c_msg msg = {
  24                 .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
  25         };
  26
  27         if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
  28                 dev_err(&priv->i2c->dev,
  29                         "%s: I2C write reg failed, reg: %02x, val: %02x\n",
  30                         KBUILD_MODNAME, reg, val);
  31                 return -EREMOTEIO;
  32         }
  33         return 0;
  34 }
  35
  36 static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val)
  37 {
  38         struct i2c_msg msg[2] = {
  39                 { .addr = priv->cfg->i2c_address, .flags = 0,
  40                         .buf = &reg, .len = 1 },
  41                 { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD,
  42                         .buf = val, .len = 1 },
  43         };
  44
  45         if (i2c_transfer(priv->i2c, msg, 2) != 2) {
  46                 dev_err(&priv->i2c->dev,
  47                         "%s: I2C read reg failed, reg: %02x\n",
  48                         KBUILD_MODNAME, reg);
  49                 return -EREMOTEIO;
  50         }
  51         return 0;
  52 }
  53
  54 static void fc0012_release(struct dvb_frontend *fe)
  55 {
  56         kfree(fe->tuner_priv);
  57         fe->tuner_priv = NULL;
  58 }
  59
  60 static int fc0012_init(struct dvb_frontend *fe)
  61 {
  62         struct fc0012_priv *priv = fe->tuner_priv;
  63         int i, ret = 0;
  64         unsigned char reg[] = {
  65                 0x00,   /* dummy reg. 0 */
  66                 0x05,   /* reg. 0x01 */
  67                 0x10,   /* reg. 0x02 */
  68                 0x00,   /* reg. 0x03 */
  69                 0x00,   /* reg. 0x04 */
  70                 0x0f,   /* reg. 0x05: may also be 0x0a */
  71                 0x00,   /* reg. 0x06: divider 2, VCO slow */
  72                 0x00,   /* reg. 0x07: may also be 0x0f */
  73                 0xff,   /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
  74                            Loop Bw 1/8 */
  75                 0x6e,   /* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
  76                 0xb8,   /* reg. 0x0a: Disable LO Test Buffer */
  77                 0x82,   /* reg. 0x0b: Output Clock is same as clock frequency,
  78                            may also be 0x83 */
  79                 0xfc,   /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
  80                 0x02,   /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
  81                 0x00,   /* reg. 0x0e */
  82                 0x00,   /* reg. 0x0f */
  83                 0x00,   /* reg. 0x10: may also be 0x0d */
  84                 0x00,   /* reg. 0x11 */
  85                 0x1f,   /* reg. 0x12: Set to maximum gain */
  86                 0x08,   /* reg. 0x13: Set to Middle Gain: 0x08,
  87                            Low Gain: 0x00, High Gain: 0x10, enable IX2: 0x80 */
  88                 0x00,   /* reg. 0x14 */
  89                 0x04,   /* reg. 0x15: Enable LNA COMPS */
  90         };
  91
  92         switch (priv->cfg->xtal_freq) {
  93         case FC_XTAL_27_MHZ:
  94         case FC_XTAL_28_8_MHZ:
  95                 reg[0x07] |= 0x20;
  96                 break;
  97         case FC_XTAL_36_MHZ:
  98         default:
  99                 break;
 100         }
 101
 102         if (priv->cfg->dual_master)
 103                 reg[0x0c] |= 0x02;
 104
 105         if (priv->cfg->loop_through)
 106                 reg[0x09] |= 0x01;
 107
 108         if (fe->ops.i2c_gate_ctrl)
 109                 fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
 110
 111         for (i = 1; i < sizeof(reg); i++) {
 112                 ret = fc0012_writereg(priv, i, reg[i]);
 113                 if (ret)
 114                         break;
 115         }
 116
 117         if (fe->ops.i2c_gate_ctrl)
 118                 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
 119
 120         if (ret)
 121                 dev_err(&priv->i2c->dev, "%s: fc0012_writereg failed: %d\n",
 122                                 KBUILD_MODNAME, ret);
 123
 124         return ret;
 125 }
 126
 127 static int fc0012_set_params(struct dvb_frontend *fe)
 128 {
 129         struct fc0012_priv *priv = fe->tuner_priv;
 130         int i, ret = 0;
 131         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 132         u32 freq = p->frequency / 1000;
 133         u32 delsys = p->delivery_system;
 134         unsigned char reg[7], am, pm, multi, tmp;
 135         unsigned long f_vco;
 136         unsigned short xtal_freq_khz_2, xin, xdiv;
 137         bool vco_select = false;
 138
 139         if (fe->callback) {
 140                 ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
 141                         FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1));
 142                 if (ret)
 143                         goto exit;
 144         }
 145
 146         switch (priv->cfg->xtal_freq) {
 147         case FC_XTAL_27_MHZ:
 148                 xtal_freq_khz_2 = 27000 / 2;
 149                 break;
 150         case FC_XTAL_36_MHZ:
 151                 xtal_freq_khz_2 = 36000 / 2;
 152                 break;
 153         case FC_XTAL_28_8_MHZ:
 154         default:
 155                 xtal_freq_khz_2 = 28800 / 2;
 156                 break;
 157         }
 158
 159         /* select frequency divider and the frequency of VCO */
 160         if (freq < 37084) {             /* freq * 96 < 3560000 */
 161                 multi = 96;
 162                 reg[5] = 0x82;
 163                 reg[6] = 0x00;
 164         } else if (freq < 55625) {      /* freq * 64 < 3560000 */
 165                 multi = 64;
 166                 reg[5] = 0x82;
 167                 reg[6] = 0x02;
 168         } else if (freq < 74167) {      /* freq * 48 < 3560000 */
 169                 multi = 48;
 170                 reg[5] = 0x42;
 171                 reg[6] = 0x00;
 172         } else if (freq < 111250) {     /* freq * 32 < 3560000 */
 173                 multi = 32;
 174                 reg[5] = 0x42;
 175                 reg[6] = 0x02;
 176         } else if (freq < 148334) {     /* freq * 24 < 3560000 */
 177                 multi = 24;
 178                 reg[5] = 0x22;
 179                 reg[6] = 0x00;
 180         } else if (freq < 222500) {     /* freq * 16 < 3560000 */
 181                 multi = 16;
 182                 reg[5] = 0x22;
 183                 reg[6] = 0x02;
 184         } else if (freq < 296667) {     /* freq * 12 < 3560000 */
 185                 multi = 12;
 186                 reg[5] = 0x12;
 187                 reg[6] = 0x00;
 188         } else if (freq < 445000) {     /* freq * 8 < 3560000 */
 189                 multi = 8;
 190                 reg[5] = 0x12;
 191                 reg[6] = 0x02;
 192         } else if (freq < 593334) {     /* freq * 6 < 3560000 */
 193                 multi = 6;
 194                 reg[5] = 0x0a;
 195                 reg[6] = 0x00;
 196         } else {
 197                 multi = 4;
 198                 reg[5] = 0x0a;
 199                 reg[6] = 0x02;
 200         }
 201
 202         f_vco = freq * multi;
 203
 204         if (f_vco >= 3060000) {
 205                 reg[6] |= 0x08;
 206                 vco_select = true;
 207         }
 208
 209         if (freq >= 45000) {
 210                 /* From divided value (XDIV) determined the FA and FP value */
 211                 xdiv = (unsigned short)(f_vco / xtal_freq_khz_2);
 212                 if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
 213                         xdiv++;
 214
 215                 pm = (unsigned char)(xdiv / 8);
 216                 am = (unsigned char)(xdiv - (8 * pm));
 217
 218                 if (am < 2) {
 219                         reg[1] = am + 8;
 220                         reg[2] = pm - 1;
 221                 } else {
 222                         reg[1] = am;
 223                         reg[2] = pm;
 224                 }
 225         } else {
 226                 /* fix for frequency less than 45 MHz */
 227                 reg[1] = 0x06;
 228                 reg[2] = 0x11;
 229         }
 230
 231         /* fix clock out */
 232         reg[6] |= 0x20;
 233
 234         /* From VCO frequency determines the XIN ( fractional part of Delta
 235            Sigma PLL) and divided value (XDIV) */
 236         xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2);
 237         xin = (xin << 15) / xtal_freq_khz_2;
 238         if (xin >= 16384)
 239                 xin += 32768;
 240
 241         reg[3] = xin >> 8;      /* xin with 9 bit resolution */
 242         reg[4] = xin & 0xff;
 243
 244         if (delsys == SYS_DVBT) {
 245                 reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
 246                 switch (p->bandwidth_hz) {
 247                 case 6000000:
 248                         reg[6] |= 0x80;
 249                         break;
 250                 case 7000000:
 251                         reg[6] |= 0x40;
 252                         break;
 253                 case 8000000:
 254                 default:
 255                         break;
 256                 }
 257         } else {
 258                 dev_err(&priv->i2c->dev, "%s: modulation type not supported!\n",
 259                                 KBUILD_MODNAME);
 260                 return -EINVAL;
 261         }
 262
 263         /* modified for Realtek demod */
 264         reg[5] |= 0x07;
 265
 266         if (fe->ops.i2c_gate_ctrl)
 267                 fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
 268
 269         for (i = 1; i <= 6; i++) {
 270                 ret = fc0012_writereg(priv, i, reg[i]);
 271                 if (ret)
 272                         goto exit;
 273         }
 274
 275         /* VCO Calibration */
 276         ret = fc0012_writereg(priv, 0x0e, 0x80);
 277         if (!ret)
 278                 ret = fc0012_writereg(priv, 0x0e, 0x00);
 279
 280         /* VCO Re-Calibration if needed */
 281         if (!ret)
 282                 ret = fc0012_writereg(priv, 0x0e, 0x00);
 283
 284         if (!ret) {
 285                 msleep(10);
 286                 ret = fc0012_readreg(priv, 0x0e, &tmp);
 287         }
 288         if (ret)
 289                 goto exit;
 290
 291         /* vco selection */
 292         tmp &= 0x3f;
 293
 294         if (vco_select) {
 295                 if (tmp > 0x3c) {
 296                         reg[6] &= ~0x08;
 297                         ret = fc0012_writereg(priv, 0x06, reg[6]);
 298                         if (!ret)
 299                                 ret = fc0012_writereg(priv, 0x0e, 0x80);
 300                         if (!ret)
 301                                 ret = fc0012_writereg(priv, 0x0e, 0x00);
 302                 }
 303         } else {
 304                 if (tmp < 0x02) {
 305                         reg[6] |= 0x08;
 306                         ret = fc0012_writereg(priv, 0x06, reg[6]);
 307                         if (!ret)
 308                                 ret = fc0012_writereg(priv, 0x0e, 0x80);
 309                         if (!ret)
 310                                 ret = fc0012_writereg(priv, 0x0e, 0x00);
 311                 }
 312         }
 313
 314         priv->frequency = p->frequency;
 315         priv->bandwidth = p->bandwidth_hz;
 316
 317 exit:
 318         if (fe->ops.i2c_gate_ctrl)
 319                 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
 320         if (ret)
 321                 dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n",
 322                                 KBUILD_MODNAME, __func__, ret);
 323         return ret;
 324 }
 325
 326 static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 327 {
 328         struct fc0012_priv *priv = fe->tuner_priv;
 329         *frequency = priv->frequency;
 330         return 0;
 331 }
 332
 333 static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
 334 {
 335         *frequency = 0; /* Zero-IF */
 336         return 0;
 337 }
 338
 339 static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 340 {
 341         struct fc0012_priv *priv = fe->tuner_priv;
 342         *bandwidth = priv->bandwidth;
 343         return 0;
 344 }
 345
 346 #define INPUT_ADC_LEVEL -8
 347
 348 static int fc0012_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
 349 {
 350         struct fc0012_priv *priv = fe->tuner_priv;
 351         int ret;
 352         unsigned char tmp;
 353         int int_temp, lna_gain, int_lna, tot_agc_gain, power;
 354         const int fc0012_lna_gain_table[] = {
 355                 /* low gain */
 356                 -63, -58, -99, -73,
 357                 -63, -65, -54, -60,
 358                 /* middle gain */
 359                  71,  70,  68,  67,
 360                  65,  63,  61,  58,
 361                 /* high gain */
 362                 197, 191, 188, 186,
 363                 184, 182, 181, 179,
 364         };
 365
 366         if (fe->ops.i2c_gate_ctrl)
 367                 fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
 368
 369         ret = fc0012_writereg(priv, 0x12, 0x00);
 370         if (ret)
 371                 goto err;
 372
 373         ret = fc0012_readreg(priv, 0x12, &tmp);
 374         if (ret)
 375                 goto err;
 376         int_temp = tmp;
 377
 378         ret = fc0012_readreg(priv, 0x13, &tmp);
 379         if (ret)
 380                 goto err;
 381         lna_gain = tmp & 0x1f;
 382
 383         if (fe->ops.i2c_gate_ctrl)
 384                 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
 385
 386         if (lna_gain < ARRAY_SIZE(fc0012_lna_gain_table)) {
 387                 int_lna = fc0012_lna_gain_table[lna_gain];
 388                 tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 +
 389                                 (int_temp & 0x1f)) * 2;
 390                 power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10;
 391
 392                 if (power >= 45)
 393                         *strength = 255;        /* 100% */
 394                 else if (power < -95)
 395                         *strength = 0;
 396                 else
 397                         *strength = (power + 95) * 255 / 140;
 398
 399                 *strength |= *strength << 8;
 400         } else {
 401                 ret = -1;
 402         }
 403
 404         goto exit;
 405
 406 err:
 407         if (fe->ops.i2c_gate_ctrl)
 408                 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
 409 exit:
 410         if (ret)
 411                 dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n",
 412                                 KBUILD_MODNAME, __func__, ret);
 413         return ret;
 414 }
 415
 416 static const struct dvb_tuner_ops fc0012_tuner_ops = {
 417         .info = {
 418                 .name           = "Fitipower FC0012",
 419
 420                 .frequency_min  = 37000000,     /* estimate */
 421                 .frequency_max  = 862000000,    /* estimate */
 422                 .frequency_step = 0,
 423         },
 424
 425         .release        = fc0012_release,
 426
 427         .init           = fc0012_init,
 428
 429         .set_params     = fc0012_set_params,
 430
 431         .get_frequency  = fc0012_get_frequency,
 432         .get_if_frequency = fc0012_get_if_frequency,
 433         .get_bandwidth  = fc0012_get_bandwidth,
 434
 435         .get_rf_strength = fc0012_get_rf_strength,
 436 };
 437
 438 struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
 439         struct i2c_adapter *i2c, const struct fc0012_config *cfg)
 440 {
 441         struct fc0012_priv *priv;
 442         int ret;
 443         u8 chip_id;
 444
 445         if (fe->ops.i2c_gate_ctrl)
 446                 fe->ops.i2c_gate_ctrl(fe, 1);
 447
 448         priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL);
 449         if (!priv) {
 450                 ret = -ENOMEM;
 451                 dev_err(&i2c->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME);
 452                 goto err;
 453         }
 454
 455         priv->cfg = cfg;
 456         priv->i2c = i2c;
 457
 458         /* check if the tuner is there */
 459         ret = fc0012_readreg(priv, 0x00, &chip_id);
 460         if (ret < 0)
 461                 goto err;
 462
 463         dev_dbg(&i2c->dev, "%s: chip_id=%02x\n", __func__, chip_id);
 464
 465         switch (chip_id) {
 466         case 0xa1:
 467                 break;
 468         default:
 469                 ret = -ENODEV;
 470                 goto err;
 471         }
 472
 473         dev_info(&i2c->dev, "%s: Fitipower FC0012 successfully identified\n",
 474                         KBUILD_MODNAME);
 475
 476         if (priv->cfg->loop_through) {
 477                 ret = fc0012_writereg(priv, 0x09, 0x6f);
 478                 if (ret < 0)
 479                         goto err;
 480         }
 481
 482         /*
 483          * TODO: Clock out en or div?
 484          * For dual tuner configuration clearing bit [0] is required.
 485          */
 486         if (priv->cfg->clock_out) {
 487                 ret =  fc0012_writereg(priv, 0x0b, 0x82);
 488                 if (ret < 0)
 489                         goto err;
 490         }
 491
 492         fe->tuner_priv = priv;
 493         memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops,
 494                 sizeof(struct dvb_tuner_ops));
 495
 496 err:
 497         if (fe->ops.i2c_gate_ctrl)
 498                 fe->ops.i2c_gate_ctrl(fe, 0);
 499
 500         if (ret) {
 501                 dev_dbg(&i2c->dev, "%s: failed: %d\n", __func__, ret);
 502                 kfree(priv);
 503                 return NULL;
 504         }
 505
 506         return fe;
 507 }
 508 EXPORT_SYMBOL(fc0012_attach);
 509
 510 MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver");
 511 MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>");
 512 MODULE_LICENSE("GPL");
 513 MODULE_VERSION("0.6");