]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/media/usb/cpia2/cpia2.h
Merge branches 'for-4.11/upstream-fixes', 'for-4.12/accutouch', 'for-4.12/cp2112...
[mirror_ubuntu-artful-kernel.git] / drivers / media / usb / cpia2 / cpia2.h
1 /****************************************************************************
2 *
3 * Filename: cpia2.h
4 *
5 * Copyright 2001, STMicrolectronics, Inc.
6 *
7 * Contact: steve.miller@st.com
8 *
9 * Description:
10 * This is a USB driver for CPiA2 based video cameras.
11 *
12 * This driver is modelled on the cpia usb driver by
13 * Jochen Scharrlach and Johannes Erdfeldt.
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 ****************************************************************************/
26
27 #ifndef __CPIA2_H__
28 #define __CPIA2_H__
29
30 #include <linux/videodev2.h>
31 #include <linux/usb.h>
32 #include <linux/poll.h>
33 #include <media/v4l2-common.h>
34 #include <media/v4l2-device.h>
35 #include <media/v4l2-ctrls.h>
36
37 #include "cpia2_registers.h"
38
39 /* define for verbose debug output */
40 //#define _CPIA2_DEBUG_
41
42 /***
43 * Image defines
44 ***/
45
46 /* Misc constants */
47 #define ALLOW_CORRUPT 0 /* Causes collater to discard checksum */
48
49 /* USB Transfer mode */
50 #define XFER_ISOC 0
51 #define XFER_BULK 1
52
53 /* USB Alternates */
54 #define USBIF_CMDONLY 0
55 #define USBIF_BULK 1
56 #define USBIF_ISO_1 2 /* 128 bytes/ms */
57 #define USBIF_ISO_2 3 /* 384 bytes/ms */
58 #define USBIF_ISO_3 4 /* 640 bytes/ms */
59 #define USBIF_ISO_4 5 /* 768 bytes/ms */
60 #define USBIF_ISO_5 6 /* 896 bytes/ms */
61 #define USBIF_ISO_6 7 /* 1023 bytes/ms */
62
63 /* Flicker Modes */
64 #define NEVER_FLICKER 0
65 #define FLICKER_60 60
66 #define FLICKER_50 50
67
68 /* Debug flags */
69 #define DEBUG_NONE 0
70 #define DEBUG_REG 0x00000001
71 #define DEBUG_DUMP_PATCH 0x00000002
72 #define DEBUG_DUMP_REGS 0x00000004
73
74 /***
75 * Video frame sizes
76 ***/
77 enum {
78 VIDEOSIZE_VGA = 0, /* 640x480 */
79 VIDEOSIZE_CIF, /* 352x288 */
80 VIDEOSIZE_QVGA, /* 320x240 */
81 VIDEOSIZE_QCIF, /* 176x144 */
82 VIDEOSIZE_288_216,
83 VIDEOSIZE_256_192,
84 VIDEOSIZE_224_168,
85 VIDEOSIZE_192_144,
86 };
87
88 #define STV_IMAGE_CIF_ROWS 288
89 #define STV_IMAGE_CIF_COLS 352
90
91 #define STV_IMAGE_QCIF_ROWS 144
92 #define STV_IMAGE_QCIF_COLS 176
93
94 #define STV_IMAGE_VGA_ROWS 480
95 #define STV_IMAGE_VGA_COLS 640
96
97 #define STV_IMAGE_QVGA_ROWS 240
98 #define STV_IMAGE_QVGA_COLS 320
99
100 #define JPEG_MARKER_COM (1<<6) /* Comment segment */
101
102 /***
103 * Enums
104 ***/
105 /* Sensor types available with cpia2 asics */
106 enum sensors {
107 CPIA2_SENSOR_410,
108 CPIA2_SENSOR_500
109 };
110
111 /* Asic types available in the CPiA2 architecture */
112 #define CPIA2_ASIC_672 0x67
113
114 /* Device types (stv672, stv676, etc) */
115 #define DEVICE_STV_672 0x0001
116 #define DEVICE_STV_676 0x0002
117
118 enum frame_status {
119 FRAME_EMPTY,
120 FRAME_READING, /* In the process of being grabbed into */
121 FRAME_READY, /* Ready to be read */
122 FRAME_ERROR,
123 };
124
125 /***
126 * Register access (for USB request byte)
127 ***/
128 enum {
129 CAMERAACCESS_SYSTEM = 0,
130 CAMERAACCESS_VC,
131 CAMERAACCESS_VP,
132 CAMERAACCESS_IDATA
133 };
134
135 #define CAMERAACCESS_TYPE_BLOCK 0x00
136 #define CAMERAACCESS_TYPE_RANDOM 0x04
137 #define CAMERAACCESS_TYPE_MASK 0x08
138 #define CAMERAACCESS_TYPE_REPEAT 0x0C
139
140 #define TRANSFER_READ 0
141 #define TRANSFER_WRITE 1
142
143 #define DEFAULT_ALT USBIF_ISO_6
144 #define DEFAULT_BRIGHTNESS 0x46
145 #define DEFAULT_CONTRAST 0x93
146 #define DEFAULT_SATURATION 0x7f
147
148 /* Power state */
149 #define HI_POWER_MODE CPIA2_SYSTEM_CONTROL_HIGH_POWER
150 #define LO_POWER_MODE CPIA2_SYSTEM_CONTROL_LOW_POWER
151
152
153 /********
154 * Commands
155 *******/
156 enum {
157 CPIA2_CMD_NONE = 0,
158 CPIA2_CMD_GET_VERSION,
159 CPIA2_CMD_GET_PNP_ID,
160 CPIA2_CMD_GET_ASIC_TYPE,
161 CPIA2_CMD_GET_SENSOR,
162 CPIA2_CMD_GET_VP_DEVICE,
163 CPIA2_CMD_GET_VP_BRIGHTNESS,
164 CPIA2_CMD_SET_VP_BRIGHTNESS,
165 CPIA2_CMD_GET_CONTRAST,
166 CPIA2_CMD_SET_CONTRAST,
167 CPIA2_CMD_GET_VP_SATURATION,
168 CPIA2_CMD_SET_VP_SATURATION,
169 CPIA2_CMD_GET_VP_GPIO_DIRECTION,
170 CPIA2_CMD_SET_VP_GPIO_DIRECTION,
171 CPIA2_CMD_GET_VP_GPIO_DATA,
172 CPIA2_CMD_SET_VP_GPIO_DATA,
173 CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION,
174 CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION,
175 CPIA2_CMD_GET_VC_MP_GPIO_DATA,
176 CPIA2_CMD_SET_VC_MP_GPIO_DATA,
177 CPIA2_CMD_ENABLE_PACKET_CTRL,
178 CPIA2_CMD_GET_FLICKER_MODES,
179 CPIA2_CMD_SET_FLICKER_MODES,
180 CPIA2_CMD_RESET_FIFO, /* clear fifo and enable stream block */
181 CPIA2_CMD_SET_HI_POWER,
182 CPIA2_CMD_SET_LOW_POWER,
183 CPIA2_CMD_CLEAR_V2W_ERR,
184 CPIA2_CMD_SET_USER_MODE,
185 CPIA2_CMD_GET_USER_MODE,
186 CPIA2_CMD_FRAMERATE_REQ,
187 CPIA2_CMD_SET_COMPRESSION_STATE,
188 CPIA2_CMD_GET_WAKEUP,
189 CPIA2_CMD_SET_WAKEUP,
190 CPIA2_CMD_GET_PW_CONTROL,
191 CPIA2_CMD_SET_PW_CONTROL,
192 CPIA2_CMD_GET_SYSTEM_CTRL,
193 CPIA2_CMD_SET_SYSTEM_CTRL,
194 CPIA2_CMD_GET_VP_SYSTEM_STATE,
195 CPIA2_CMD_GET_VP_SYSTEM_CTRL,
196 CPIA2_CMD_SET_VP_SYSTEM_CTRL,
197 CPIA2_CMD_GET_VP_EXP_MODES,
198 CPIA2_CMD_SET_VP_EXP_MODES,
199 CPIA2_CMD_GET_DEVICE_CONFIG,
200 CPIA2_CMD_SET_DEVICE_CONFIG,
201 CPIA2_CMD_SET_SERIAL_ADDR,
202 CPIA2_CMD_SET_SENSOR_CR1,
203 CPIA2_CMD_GET_VC_CONTROL,
204 CPIA2_CMD_SET_VC_CONTROL,
205 CPIA2_CMD_SET_TARGET_KB,
206 CPIA2_CMD_SET_DEF_JPEG_OPT,
207 CPIA2_CMD_REHASH_VP4,
208 CPIA2_CMD_GET_USER_EFFECTS,
209 CPIA2_CMD_SET_USER_EFFECTS
210 };
211
212 enum user_cmd {
213 COMMAND_NONE = 0x00000001,
214 COMMAND_SET_FPS = 0x00000002,
215 COMMAND_SET_COLOR_PARAMS = 0x00000004,
216 COMMAND_GET_COLOR_PARAMS = 0x00000008,
217 COMMAND_SET_FORMAT = 0x00000010, /* size, etc */
218 COMMAND_SET_FLICKER = 0x00000020
219 };
220
221 /***
222 * Some defines specific to the 676 chip
223 ***/
224 #define CAMACC_CIF 0x01
225 #define CAMACC_VGA 0x02
226 #define CAMACC_QCIF 0x04
227 #define CAMACC_QVGA 0x08
228
229
230 struct cpia2_register {
231 u8 index;
232 u8 value;
233 };
234
235 struct cpia2_reg_mask {
236 u8 index;
237 u8 and_mask;
238 u8 or_mask;
239 u8 fill;
240 };
241
242 struct cpia2_command {
243 u32 command;
244 u8 req_mode; /* (Block or random) | registerBank */
245 u8 reg_count;
246 u8 direction;
247 u8 start;
248 union reg_types {
249 struct cpia2_register registers[32];
250 struct cpia2_reg_mask masks[16];
251 u8 block_data[64];
252 u8 *patch_data; /* points to function defined block */
253 } buffer;
254 };
255
256 struct camera_params {
257 struct {
258 u8 firmware_revision_hi; /* For system register set (bank 0) */
259 u8 firmware_revision_lo;
260 u8 asic_id; /* Video Compressor set (bank 1) */
261 u8 asic_rev;
262 u8 vp_device_hi; /* Video Processor set (bank 2) */
263 u8 vp_device_lo;
264 u8 sensor_flags;
265 u8 sensor_rev;
266 } version;
267
268 struct {
269 u32 device_type; /* enumerated from vendor/product ids.
270 * Currently, either STV_672 or STV_676 */
271 u16 vendor;
272 u16 product;
273 u16 device_revision;
274 } pnp_id;
275
276 struct {
277 u8 brightness; /* CPIA2_VP_EXPOSURE_TARGET */
278 u8 contrast; /* Note: this is CPIA2_VP_YRANGE */
279 u8 saturation; /* CPIA2_VP_SATURATION */
280 } color_params;
281
282 struct {
283 u8 cam_register;
284 u8 flicker_mode_req; /* 1 if flicker on, else never flicker */
285 } flicker_control;
286
287 struct {
288 u8 jpeg_options;
289 u8 creep_period;
290 u8 user_squeeze;
291 u8 inhibit_htables;
292 } compression;
293
294 struct {
295 u8 ohsize; /* output image size */
296 u8 ovsize;
297 u8 hcrop; /* cropping start_pos/4 */
298 u8 vcrop;
299 u8 hphase; /* scaling registers */
300 u8 vphase;
301 u8 hispan;
302 u8 vispan;
303 u8 hicrop;
304 u8 vicrop;
305 u8 hifraction;
306 u8 vifraction;
307 } image_size;
308
309 struct {
310 int width; /* actual window width */
311 int height; /* actual window height */
312 } roi;
313
314 struct {
315 u8 video_mode;
316 u8 frame_rate;
317 u8 video_size; /* Not a register, just a convenience for cropped sizes */
318 u8 gpio_direction;
319 u8 gpio_data;
320 u8 system_ctrl;
321 u8 system_state;
322 u8 lowlight_boost; /* Bool: 0 = off, 1 = on */
323 u8 device_config;
324 u8 exposure_modes;
325 u8 user_effects;
326 } vp_params;
327
328 struct {
329 u8 pw_control;
330 u8 wakeup;
331 u8 vc_control;
332 u8 vc_mp_direction;
333 u8 vc_mp_data;
334 u8 quality;
335 } vc_params;
336
337 struct {
338 u8 power_mode;
339 u8 system_ctrl;
340 u8 stream_mode; /* This is the current alternate for usb drivers */
341 u8 allow_corrupt;
342 } camera_state;
343 };
344
345 #define NUM_SBUF 2
346
347 struct cpia2_sbuf {
348 char *data;
349 struct urb *urb;
350 };
351
352 struct framebuf {
353 struct timeval timestamp;
354 unsigned long seq;
355 int num;
356 int length;
357 int max_length;
358 volatile enum frame_status status;
359 u8 *data;
360 struct framebuf *next;
361 };
362
363 struct camera_data {
364 /* locks */
365 struct v4l2_device v4l2_dev;
366 struct mutex v4l2_lock; /* serialize file operations */
367 struct v4l2_ctrl_handler hdl;
368 struct {
369 /* Lights control cluster */
370 struct v4l2_ctrl *top_light;
371 struct v4l2_ctrl *bottom_light;
372 };
373 struct v4l2_ctrl *usb_alt;
374
375 /* camera status */
376 int first_image_seen;
377 enum sensors sensor_type;
378 u8 flush;
379 struct v4l2_fh *stream_fh;
380 u8 mmapped;
381 int streaming; /* 0 = no, 1 = yes */
382 int xfer_mode; /* XFER_BULK or XFER_ISOC */
383 struct camera_params params; /* camera settings */
384
385 /* v4l */
386 int video_size; /* VIDEO_SIZE_ */
387 struct video_device vdev; /* v4l videodev */
388 u32 width;
389 u32 height; /* Its size */
390 __u32 pixelformat; /* Format fourcc */
391
392 /* USB */
393 struct usb_device *dev;
394 unsigned char iface;
395 unsigned int cur_alt;
396 unsigned int old_alt;
397 struct cpia2_sbuf sbuf[NUM_SBUF]; /* Double buffering */
398
399 wait_queue_head_t wq_stream;
400
401 /* Buffering */
402 u32 frame_size;
403 int num_frames;
404 unsigned long frame_count;
405 u8 *frame_buffer; /* frame buffer data */
406 struct framebuf *buffers;
407 struct framebuf * volatile curbuff;
408 struct framebuf *workbuff;
409
410 /* MJPEG Extension */
411 int APPn; /* Number of APP segment to be written, must be 0..15 */
412 int APP_len; /* Length of data in JPEG APPn segment */
413 char APP_data[60]; /* Data in the JPEG APPn segment. */
414
415 int COM_len; /* Length of data in JPEG COM segment */
416 char COM_data[60]; /* Data in JPEG COM segment */
417 };
418
419 /* v4l */
420 int cpia2_register_camera(struct camera_data *cam);
421 void cpia2_unregister_camera(struct camera_data *cam);
422 void cpia2_camera_release(struct v4l2_device *v4l2_dev);
423
424 /* core */
425 int cpia2_reset_camera(struct camera_data *cam);
426 int cpia2_set_low_power(struct camera_data *cam);
427 void cpia2_dbg_dump_registers(struct camera_data *cam);
428 int cpia2_match_video_size(int width, int height);
429 void cpia2_set_camera_state(struct camera_data *cam);
430 void cpia2_save_camera_state(struct camera_data *cam);
431 void cpia2_set_color_params(struct camera_data *cam);
432 void cpia2_set_brightness(struct camera_data *cam, unsigned char value);
433 void cpia2_set_contrast(struct camera_data *cam, unsigned char value);
434 void cpia2_set_saturation(struct camera_data *cam, unsigned char value);
435 int cpia2_set_flicker_mode(struct camera_data *cam, int mode);
436 void cpia2_set_format(struct camera_data *cam);
437 int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd);
438 int cpia2_do_command(struct camera_data *cam,
439 unsigned int command,
440 unsigned char direction, unsigned char param);
441 struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf);
442 int cpia2_init_camera(struct camera_data *cam);
443 int cpia2_allocate_buffers(struct camera_data *cam);
444 void cpia2_free_buffers(struct camera_data *cam);
445 long cpia2_read(struct camera_data *cam,
446 char __user *buf, unsigned long count, int noblock);
447 unsigned int cpia2_poll(struct camera_data *cam,
448 struct file *filp, poll_table *wait);
449 int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma);
450 void cpia2_set_property_flip(struct camera_data *cam, int prop_val);
451 void cpia2_set_property_mirror(struct camera_data *cam, int prop_val);
452 int cpia2_set_gpio(struct camera_data *cam, unsigned char setting);
453 int cpia2_set_fps(struct camera_data *cam, int framerate);
454
455 /* usb */
456 int cpia2_usb_init(void);
457 void cpia2_usb_cleanup(void);
458 int cpia2_usb_transfer_cmd(struct camera_data *cam, void *registers,
459 u8 request, u8 start, u8 count, u8 direction);
460 int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate);
461 int cpia2_usb_stream_stop(struct camera_data *cam);
462 int cpia2_usb_stream_pause(struct camera_data *cam);
463 int cpia2_usb_stream_resume(struct camera_data *cam);
464 int cpia2_usb_change_streaming_alternate(struct camera_data *cam,
465 unsigned int alt);
466
467
468 /* ----------------------- debug functions ---------------------- */
469 #ifdef _CPIA2_DEBUG_
470 #define ALOG(lev, fmt, args...) printk(lev "%s:%d %s(): " fmt, __FILE__, __LINE__, __func__, ## args)
471 #define LOG(fmt, args...) ALOG(KERN_INFO, fmt, ## args)
472 #define ERR(fmt, args...) ALOG(KERN_ERR, fmt, ## args)
473 #define DBG(fmt, args...) ALOG(KERN_DEBUG, fmt, ## args)
474 #else
475 #define ALOG(fmt,args...) printk(fmt,##args)
476 #define LOG(fmt,args...) ALOG(KERN_INFO "cpia2: "fmt,##args)
477 #define ERR(fmt,args...) ALOG(KERN_ERR "cpia2: "fmt,##args)
478 #define DBG(fmn,args...) do {} while(0)
479 #endif
480 /* No function or lineno, for shorter lines */
481 #define KINFO(fmt, args...) printk(KERN_INFO fmt,##args)
482
483 #endif