]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/media/usb/dvb-usb-v2/af9035.h
HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch
[mirror_ubuntu-artful-kernel.git] / drivers / media / usb / dvb-usb-v2 / af9035.h
1 /*
2 * Afatech AF9035 DVB USB driver
3 *
4 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
5 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
20 */
21
22 #ifndef AF9035_H
23 #define AF9035_H
24
25 #include "dvb_usb.h"
26 #include "af9033.h"
27 #include "tua9001.h"
28 #include "fc0011.h"
29 #include "fc0012.h"
30 #include "mxl5007t.h"
31 #include "tda18218.h"
32 #include "fc2580.h"
33 #include "it913x.h"
34 #include "si2168.h"
35 #include "si2157.h"
36
37 struct reg_val {
38 u32 reg;
39 u8 val;
40 };
41
42 struct reg_val_mask {
43 u32 reg;
44 u8 val;
45 u8 mask;
46 };
47
48 struct usb_req {
49 u8 cmd;
50 u8 mbox;
51 u8 wlen;
52 u8 *wbuf;
53 u8 rlen;
54 u8 *rbuf;
55 };
56
57 struct state {
58 #define BUF_LEN 64
59 u8 buf[BUF_LEN];
60 u8 seq; /* packet sequence number */
61 u8 prechip_version;
62 u8 chip_version;
63 u16 chip_type;
64 u8 dual_mode:1;
65 u8 no_read:1;
66 u16 eeprom_addr;
67 u8 af9033_i2c_addr[2];
68 struct af9033_config af9033_config[2];
69 struct af9033_ops ops;
70 #define AF9035_I2C_CLIENT_MAX 4
71 struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
72 struct i2c_adapter *i2c_adapter_demod;
73 };
74
75 static const u32 clock_lut_af9035[] = {
76 20480000, /* FPGA */
77 16384000, /* 16.38 MHz */
78 20480000, /* 20.48 MHz */
79 36000000, /* 36.00 MHz */
80 30000000, /* 30.00 MHz */
81 26000000, /* 26.00 MHz */
82 28000000, /* 28.00 MHz */
83 32000000, /* 32.00 MHz */
84 34000000, /* 34.00 MHz */
85 24000000, /* 24.00 MHz */
86 22000000, /* 22.00 MHz */
87 12000000, /* 12.00 MHz */
88 };
89
90 static const u32 clock_lut_it9135[] = {
91 12000000, /* 12.00 MHz */
92 20480000, /* 20.48 MHz */
93 36000000, /* 36.00 MHz */
94 30000000, /* 30.00 MHz */
95 26000000, /* 26.00 MHz */
96 28000000, /* 28.00 MHz */
97 32000000, /* 32.00 MHz */
98 34000000, /* 34.00 MHz */
99 24000000, /* 24.00 MHz */
100 22000000, /* 22.00 MHz */
101 };
102
103 #define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"
104 #define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"
105 #define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"
106 #define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw"
107
108 /*
109 * eeprom is memory mapped as read only. Writing that memory mapped address
110 * will not corrupt eeprom.
111 *
112 * TS mode:
113 * 0 TS
114 * 1 DCA + PIP
115 * 3 PIP
116 * 5 DCA + PIP (AF9035 only)
117 * n DCA
118 *
119 * Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS.
120 */
121
122 #define EEPROM_BASE_AF9035 0x42f5
123 #define EEPROM_BASE_IT9135 0x4994
124 #define EEPROM_SHIFT 0x10
125
126 #define EEPROM_IR_MODE 0x18
127 #define EEPROM_TS_MODE 0x31
128 #define EEPROM_2ND_DEMOD_ADDR 0x32
129 #define EEPROM_IR_TYPE 0x34
130 #define EEPROM_1_IF_L 0x38
131 #define EEPROM_1_IF_H 0x39
132 #define EEPROM_1_TUNER_ID 0x3c
133 #define EEPROM_2_IF_L 0x48
134 #define EEPROM_2_IF_H 0x49
135 #define EEPROM_2_TUNER_ID 0x4c
136
137 /* USB commands */
138 #define CMD_MEM_RD 0x00
139 #define CMD_MEM_WR 0x01
140 #define CMD_I2C_RD 0x02
141 #define CMD_I2C_WR 0x03
142 #define CMD_IR_GET 0x18
143 #define CMD_FW_DL 0x21
144 #define CMD_FW_QUERYINFO 0x22
145 #define CMD_FW_BOOT 0x23
146 #define CMD_FW_DL_BEGIN 0x24
147 #define CMD_FW_DL_END 0x25
148 #define CMD_FW_SCATTER_WR 0x29
149 #define CMD_GENERIC_I2C_RD 0x2a
150 #define CMD_GENERIC_I2C_WR 0x2b
151
152 #endif