drivers/media/video/em28xx/em28xx-input.c

   1 /*
   2   handle em28xx IR remotes via linux kernel input layer.
   3
   4    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   5                       Markus Rechberger <mrechberger@gmail.com>
   6                       Mauro Carvalho Chehab <mchehab@infradead.org>
   7                       Sascha Sommer <saschasommer@freenet.de>
   8
   9   This program is free software; you can redistribute it and/or modify
  10   it under the terms of the GNU General Public License as published by
  11   the Free Software Foundation; either version 2 of the License, or
  12   (at your option) any later version.
  13
  14   This program is distributed in the hope that it will be useful,
  15   but WITHOUT ANY WARRANTY; without even the implied warranty of
  16   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17   GNU General Public License for more details.
  18
  19   You should have received a copy of the GNU General Public License
  20   along with this program; if not, write to the Free Software
  21   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  22  */
  23
  24 #include <linux/module.h>
  25 #include <linux/init.h>
  26 #include <linux/delay.h>
  27 #include <linux/interrupt.h>
  28 #include <linux/input.h>
  29 #include <linux/usb.h>
  30
  31 #include "em28xx.h"
  32
  33 #define EM28XX_SNAPSHOT_KEY KEY_CAMERA
  34 #define EM28XX_SBUTTON_QUERY_INTERVAL 500
  35 #define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20
  36
  37 static unsigned int ir_debug;
  38 module_param(ir_debug, int, 0644);
  39 MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
  40
  41 #define i2cdprintk(fmt, arg...) \
  42         if (ir_debug) { \
  43                 printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
  44         }
  45
  46 #define dprintk(fmt, arg...) \
  47         if (ir_debug) { \
  48                 printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
  49         }
  50
  51 /**********************************************************
  52  Polling structure used by em28xx IR's
  53  **********************************************************/
  54
  55 struct em28xx_ir_poll_result {
  56         unsigned int toggle_bit:1;
  57         unsigned int read_count:7;
  58         u8 rc_address;
  59         u8 rc_data[4]; /* 1 byte on em2860/2880, 4 on em2874 */
  60 };
  61
  62 struct em28xx_IR {
  63         struct em28xx *dev;
  64         struct input_dev *input;
  65         struct ir_input_state ir;
  66         char name[32];
  67         char phys[32];
  68
  69         /* poll external decoder */
  70         int polling;
  71         struct delayed_work work;
  72         unsigned int last_toggle:1;
  73         unsigned int last_readcount;
  74         unsigned int repeat_interval;
  75
  76         int  (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
  77 };
  78
  79 /**********************************************************
  80  I2C IR based get keycodes - should be used with ir-kbd-i2c
  81  **********************************************************/
  82
  83 int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
  84 {
  85         unsigned char b;
  86
  87         /* poll IR chip */
  88         if (1 != i2c_master_recv(ir->c, &b, 1)) {
  89                 i2cdprintk("read error\n");
  90                 return -EIO;
  91         }
  92
  93         /* it seems that 0xFE indicates that a button is still hold
  94            down, while 0xff indicates that no button is hold
  95            down. 0xfe sequences are sometimes interrupted by 0xFF */
  96
  97         i2cdprintk("key %02x\n", b);
  98
  99         if (b == 0xff)
 100                 return 0;
 101
 102         if (b == 0xfe)
 103                 /* keep old data */
 104                 return 1;
 105
 106         *ir_key = b;
 107         *ir_raw = b;
 108         return 1;
 109 }
 110
 111 int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 112 {
 113         unsigned char buf[2];
 114         unsigned char code;
 115
 116         /* poll IR chip */
 117         if (2 != i2c_master_recv(ir->c, buf, 2))
 118                 return -EIO;
 119
 120         /* Does eliminate repeated parity code */
 121         if (buf[1] == 0xff)
 122                 return 0;
 123
 124         ir->old = buf[1];
 125
 126         /* Rearranges bits to the right order */
 127         code =   ((buf[0]&0x01)<<5) | /* 0010 0000 */
 128                  ((buf[0]&0x02)<<3) | /* 0001 0000 */
 129                  ((buf[0]&0x04)<<1) | /* 0000 1000 */
 130                  ((buf[0]&0x08)>>1) | /* 0000 0100 */
 131                  ((buf[0]&0x10)>>3) | /* 0000 0010 */
 132                  ((buf[0]&0x20)>>5);  /* 0000 0001 */
 133
 134         i2cdprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",
 135                         code, buf[0]);
 136
 137         /* return key */
 138         *ir_key = code;
 139         *ir_raw = code;
 140         return 1;
 141 }
 142
 143 int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
 144                                      u32 *ir_raw)
 145 {
 146         unsigned char buf[3];
 147
 148         /* poll IR chip */
 149
 150         if (3 != i2c_master_recv(ir->c, buf, 3)) {
 151                 i2cdprintk("read error\n");
 152                 return -EIO;
 153         }
 154
 155         i2cdprintk("key %02x\n", buf[2]&0x3f);
 156         if (buf[0] != 0x00)
 157                 return 0;
 158
 159         *ir_key = buf[2]&0x3f;
 160         *ir_raw = buf[2]&0x3f;
 161
 162         return 1;
 163 }
 164
 165 /**********************************************************
 166  Poll based get keycode functions
 167  **********************************************************/
 168
 169 /* This is for the em2860/em2880 */
 170 static int default_polling_getkey(struct em28xx_IR *ir,
 171                                   struct em28xx_ir_poll_result *poll_result)
 172 {
 173         struct em28xx *dev = ir->dev;
 174         int rc;
 175         u8 msg[3] = { 0, 0, 0 };
 176
 177         /* Read key toggle, brand, and key code
 178            on registers 0x45, 0x46 and 0x47
 179          */
 180         rc = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R45_IR,
 181                                           msg, sizeof(msg));
 182         if (rc < 0)
 183                 return rc;
 184
 185         /* Infrared toggle (Reg 0x45[7]) */
 186         poll_result->toggle_bit = (msg[0] >> 7);
 187
 188         /* Infrared read count (Reg 0x45[6:0] */
 189         poll_result->read_count = (msg[0] & 0x7f);
 190
 191         /* Remote Control Address (Reg 0x46) */
 192         poll_result->rc_address = msg[1];
 193
 194         /* Remote Control Data (Reg 0x47) */
 195         poll_result->rc_data[0] = msg[2];
 196
 197         return 0;
 198 }
 199
 200 static int em2874_polling_getkey(struct em28xx_IR *ir,
 201                                  struct em28xx_ir_poll_result *poll_result)
 202 {
 203         struct em28xx *dev = ir->dev;
 204         int rc;
 205         u8 msg[5] = { 0, 0, 0, 0, 0 };
 206
 207         /* Read key toggle, brand, and key code
 208            on registers 0x51-55
 209          */
 210         rc = dev->em28xx_read_reg_req_len(dev, 0, EM2874_R51_IR,
 211                                           msg, sizeof(msg));
 212         if (rc < 0)
 213                 return rc;
 214
 215         /* Infrared toggle (Reg 0x51[7]) */
 216         poll_result->toggle_bit = (msg[0] >> 7);
 217
 218         /* Infrared read count (Reg 0x51[6:0] */
 219         poll_result->read_count = (msg[0] & 0x7f);
 220
 221         /* Remote Control Address (Reg 0x52) */
 222         poll_result->rc_address = msg[1];
 223
 224         /* Remote Control Data (Reg 0x53-55) */
 225         poll_result->rc_data[0] = msg[2];
 226         poll_result->rc_data[1] = msg[3];
 227         poll_result->rc_data[2] = msg[4];
 228
 229         return 0;
 230 }
 231
 232 /**********************************************************
 233  Polling code for em28xx
 234  **********************************************************/
 235
 236 static void em28xx_ir_handle_key(struct em28xx_IR *ir)
 237 {
 238         int result;
 239         int do_sendkey = 0;
 240         struct em28xx_ir_poll_result poll_result;
 241
 242         /* read the registers containing the IR status */
 243         result = ir->get_key(ir, &poll_result);
 244         if (result < 0) {
 245                 dprintk("ir->get_key() failed %d\n", result);
 246                 return;
 247         }
 248
 249         dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x\n",
 250                 poll_result.toggle_bit, poll_result.read_count,
 251                 ir->last_readcount, poll_result.rc_data[0]);
 252
 253         if (ir->dev->chip_id == CHIP_ID_EM2874) {
 254                 /* The em2874 clears the readcount field every time the
 255                    register is read.  The em2860/2880 datasheet says that it
 256                    is supposed to clear the readcount, but it doesn't.  So with
 257                    the em2874, we are looking for a non-zero read count as
 258                    opposed to a readcount that is incrementing */
 259                 ir->last_readcount = 0;
 260         }
 261
 262         if (poll_result.read_count == 0) {
 263                 /* The button has not been pressed since the last read */
 264         } else if (ir->last_toggle != poll_result.toggle_bit) {
 265                 /* A button has been pressed */
 266                 dprintk("button has been pressed\n");
 267                 ir->last_toggle = poll_result.toggle_bit;
 268                 ir->repeat_interval = 0;
 269                 do_sendkey = 1;
 270         } else if (poll_result.toggle_bit == ir->last_toggle &&
 271                    poll_result.read_count > 0 &&
 272                    poll_result.read_count != ir->last_readcount) {
 273                 /* The button is still being held down */
 274                 dprintk("button being held down\n");
 275
 276                 /* Debouncer for first keypress */
 277                 if (ir->repeat_interval++ > 9) {
 278                         /* Start repeating after 1 second */
 279                         do_sendkey = 1;
 280                 }
 281         }
 282
 283         if (do_sendkey) {
 284                 dprintk("sending keypress\n");
 285                 ir_input_keydown(ir->input, &ir->ir, poll_result.rc_data[0]);
 286                 ir_input_nokey(ir->input, &ir->ir);
 287         }
 288
 289         ir->last_readcount = poll_result.read_count;
 290         return;
 291 }
 292
 293 static void em28xx_ir_work(struct work_struct *work)
 294 {
 295         struct em28xx_IR *ir = container_of(work, struct em28xx_IR, work.work);
 296
 297         em28xx_ir_handle_key(ir);
 298         schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
 299 }
 300
 301 static void em28xx_ir_start(struct em28xx_IR *ir)
 302 {
 303         INIT_DELAYED_WORK(&ir->work, em28xx_ir_work);
 304         schedule_delayed_work(&ir->work, 0);
 305 }
 306
 307 static void em28xx_ir_stop(struct em28xx_IR *ir)
 308 {
 309         cancel_delayed_work_sync(&ir->work);
 310 }
 311
 312 int em28xx_ir_init(struct em28xx *dev)
 313 {
 314         struct em28xx_IR *ir;
 315         struct input_dev *input_dev;
 316         u8 ir_config;
 317         int err = -ENOMEM;
 318
 319         if (dev->board.ir_codes == NULL) {
 320                 /* No remote control support */
 321                 return 0;
 322         }
 323
 324         ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 325         input_dev = input_allocate_device();
 326         if (!ir || !input_dev)
 327                 goto err_out_free;
 328
 329         ir->input = input_dev;
 330
 331         /* Setup the proper handler based on the chip */
 332         switch (dev->chip_id) {
 333         case CHIP_ID_EM2860:
 334         case CHIP_ID_EM2883:
 335                 ir->get_key = default_polling_getkey;
 336                 break;
 337         case CHIP_ID_EM2874:
 338                 ir->get_key = em2874_polling_getkey;
 339                 /* For now we only support RC5, so enable it */
 340                 ir_config = EM2874_IR_RC5;
 341                 em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
 342                 break;
 343         default:
 344                 printk("Unrecognized em28xx chip id: IR not supported\n");
 345                 goto err_out_free;
 346         }
 347
 348         /* This is how often we ask the chip for IR information */
 349         ir->polling = 100; /* ms */
 350
 351         /* init input device */
 352         snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)",
 353                                                 dev->name);
 354
 355         usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
 356         strlcat(ir->phys, "/input0", sizeof(ir->phys));
 357
 358         ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER, dev->board.ir_codes);
 359         input_dev->name = ir->name;
 360         input_dev->phys = ir->phys;
 361         input_dev->id.bustype = BUS_USB;
 362         input_dev->id.version = 1;
 363         input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
 364         input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
 365
 366         input_dev->dev.parent = &dev->udev->dev;
 367         /* record handles to ourself */
 368         ir->dev = dev;
 369         dev->ir = ir;
 370
 371         em28xx_ir_start(ir);
 372
 373         /* all done */
 374         err = input_register_device(ir->input);
 375         if (err)
 376                 goto err_out_stop;
 377
 378         return 0;
 379  err_out_stop:
 380         em28xx_ir_stop(ir);
 381         dev->ir = NULL;
 382  err_out_free:
 383         input_free_device(input_dev);
 384         kfree(ir);
 385         return err;
 386 }
 387
 388 int em28xx_ir_fini(struct em28xx *dev)
 389 {
 390         struct em28xx_IR *ir = dev->ir;
 391
 392         /* skip detach on non attached boards */
 393         if (!ir)
 394                 return 0;
 395
 396         em28xx_ir_stop(ir);
 397         input_unregister_device(ir->input);
 398         kfree(ir);
 399
 400         /* done */
 401         dev->ir = NULL;
 402         return 0;
 403 }
 404
 405 /**********************************************************
 406  Handle Webcam snapshot button
 407  **********************************************************/
 408
 409 static void em28xx_query_sbutton(struct work_struct *work)
 410 {
 411         /* Poll the register and see if the button is depressed */
 412         struct em28xx *dev =
 413                 container_of(work, struct em28xx, sbutton_query_work.work);
 414         int ret;
 415
 416         ret = em28xx_read_reg(dev, EM28XX_R0C_USBSUSP);
 417
 418         if (ret & EM28XX_R0C_USBSUSP_SNAPSHOT) {
 419                 u8 cleared;
 420                 /* Button is depressed, clear the register */
 421                 cleared = ((u8) ret) & ~EM28XX_R0C_USBSUSP_SNAPSHOT;
 422                 em28xx_write_regs(dev, EM28XX_R0C_USBSUSP, &cleared, 1);
 423
 424                 /* Not emulate the keypress */
 425                 input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
 426                                  1);
 427                 /* Now unpress the key */
 428                 input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
 429                                  0);
 430         }
 431
 432         /* Schedule next poll */
 433         schedule_delayed_work(&dev->sbutton_query_work,
 434                               msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL));
 435 }
 436
 437 void em28xx_register_snapshot_button(struct em28xx *dev)
 438 {
 439         struct input_dev *input_dev;
 440         int err;
 441
 442         em28xx_info("Registering snapshot button...\n");
 443         input_dev = input_allocate_device();
 444         if (!input_dev) {
 445                 em28xx_errdev("input_allocate_device failed\n");
 446                 return;
 447         }
 448
 449         usb_make_path(dev->udev, dev->snapshot_button_path,
 450                       sizeof(dev->snapshot_button_path));
 451         strlcat(dev->snapshot_button_path, "/sbutton",
 452                 sizeof(dev->snapshot_button_path));
 453         INIT_DELAYED_WORK(&dev->sbutton_query_work, em28xx_query_sbutton);
 454
 455         input_dev->name = "em28xx snapshot button";
 456         input_dev->phys = dev->snapshot_button_path;
 457         input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
 458         set_bit(EM28XX_SNAPSHOT_KEY, input_dev->keybit);
 459         input_dev->keycodesize = 0;
 460         input_dev->keycodemax = 0;
 461         input_dev->id.bustype = BUS_USB;
 462         input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
 463         input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
 464         input_dev->id.version = 1;
 465         input_dev->dev.parent = &dev->udev->dev;
 466
 467         err = input_register_device(input_dev);
 468         if (err) {
 469                 em28xx_errdev("input_register_device failed\n");
 470                 input_free_device(input_dev);
 471                 return;
 472         }
 473
 474         dev->sbutton_input_dev = input_dev;
 475         schedule_delayed_work(&dev->sbutton_query_work,
 476                               msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL));
 477         return;
 478
 479 }
 480
 481 void em28xx_deregister_snapshot_button(struct em28xx *dev)
 482 {
 483         if (dev->sbutton_input_dev != NULL) {
 484                 em28xx_info("Deregistering snapshot button\n");
 485                 cancel_rearming_delayed_work(&dev->sbutton_query_work);
 486                 input_unregister_device(dev->sbutton_input_dev);
 487                 dev->sbutton_input_dev = NULL;
 488         }
 489         return;
 490 }