]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/message/fusion/mptscsih.c
projects / mirror_ubuntu-artful-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
scsi: mptscsih: Remove bogus interpretation of request->ioprio
[mirror_ubuntu-artful-kernel.git] / drivers / message / fusion / mptscsih.c
1 /*
2 * linux/drivers/message/fusion/mptscsih.c
3 * For use with LSI PCI chip/adapter(s)
4 * running LSI Fusion MPT (Message Passing Technology) firmware.
5 *
6 * Copyright (c) 1999-2008 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
8 *
9 */
10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
11 /*
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; version 2 of the License.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 NO WARRANTY
22 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26 solely responsible for determining the appropriateness of using and
27 distributing the Program and assumes all risks associated with its
28 exercise of rights under this Agreement, including but not limited to
29 the risks and costs of program errors, damage to or loss of data,
30 programs or equipment, and unavailability or interruption of operations.
31
32 DISCLAIMER OF LIABILITY
33 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
40
41 You should have received a copy of the GNU General Public License
42 along with this program; if not, write to the Free Software
43 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
44 */
45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
46
47 #include <linux/module.h>
48 #include <linux/kernel.h>
49 #include <linux/slab.h>
50 #include <linux/init.h>
51 #include <linux/errno.h>
52 #include <linux/kdev_t.h>
53 #include <linux/blkdev.h>
54 #include <linux/delay.h> /* for mdelay */
55 #include <linux/interrupt.h> /* needed for in_interrupt() proto */
56 #include <linux/reboot.h> /* notifier code */
57 #include <linux/workqueue.h>
58
59 #include <scsi/scsi.h>
60 #include <scsi/scsi_cmnd.h>
61 #include <scsi/scsi_device.h>
62 #include <scsi/scsi_host.h>
63 #include <scsi/scsi_tcq.h>
64 #include <scsi/scsi_dbg.h>
65
66 #include "mptbase.h"
67 #include "mptscsih.h"
68 #include "lsi/mpi_log_sas.h"
69
70 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
71 #define my_NAME "Fusion MPT SCSI Host driver"
72 #define my_VERSION MPT_LINUX_VERSION_COMMON
73 #define MYNAM "mptscsih"
74
75 MODULE_AUTHOR(MODULEAUTHOR);
76 MODULE_DESCRIPTION(my_NAME);
77 MODULE_LICENSE("GPL");
78 MODULE_VERSION(my_VERSION);
79
80 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
81 /*
82 * Other private/forward protos...
83 */
84 struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
85 static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
86 static void mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
87 static int SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
88 int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
89 static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq);
90 int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
91
92 static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
93 SCSIIORequest_t *pReq, int req_idx);
94 static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
95 static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
96
97 int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
98 u64 lun, int ctx2abort, ulong timeout);
99
100 int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
101 int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
102
103 void
104 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
105 static int mptscsih_get_completion_code(MPT_ADAPTER *ioc,
106 MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
107 int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
108 static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
109 static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
110
111 static int
112 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
113 SCSITaskMgmtReply_t *pScsiTmReply);
114 void mptscsih_remove(struct pci_dev *);
115 void mptscsih_shutdown(struct pci_dev *);
116 #ifdef CONFIG_PM
117 int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
118 int mptscsih_resume(struct pci_dev *pdev);
119 #endif
120
121 #define SNS_LEN(scp) SCSI_SENSE_BUFFERSIZE
122
123
124 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
125 /*
126 * mptscsih_getFreeChainBuffer - Function to get a free chain
127 * from the MPT_SCSI_HOST FreeChainQ.
128 * @ioc: Pointer to MPT_ADAPTER structure
129 * @req_idx: Index of the SCSI IO request frame. (output)
130 *
131 * return SUCCESS or FAILED
132 */
133 static inline int
134 mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
135 {
136 MPT_FRAME_HDR *chainBuf;
137 unsigned long flags;
138 int rc;
139 int chain_idx;
140
141 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n",
142 ioc->name));
143 spin_lock_irqsave(&ioc->FreeQlock, flags);
144 if (!list_empty(&ioc->FreeChainQ)) {
145 int offset;
146
147 chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR,
148 u.frame.linkage.list);
149 list_del(&chainBuf->u.frame.linkage.list);
150 offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
151 chain_idx = offset / ioc->req_sz;
152 rc = SUCCESS;
153 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
154 "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
155 ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
156 } else {
157 rc = FAILED;
158 chain_idx = MPT_HOST_NO_CHAIN;
159 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
160 ioc->name));
161 }
162 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
163
164 *retIndex = chain_idx;
165 return rc;
166 } /* mptscsih_getFreeChainBuffer() */
167
168 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
169 /*
170 * mptscsih_AddSGE - Add a SGE (plus chain buffers) to the
171 * SCSIIORequest_t Message Frame.
172 * @ioc: Pointer to MPT_ADAPTER structure
173 * @SCpnt: Pointer to scsi_cmnd structure
174 * @pReq: Pointer to SCSIIORequest_t structure
175 *
176 * Returns ...
177 */
178 static int
179 mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
180 SCSIIORequest_t *pReq, int req_idx)
181 {
182 char *psge;
183 char *chainSge;
184 struct scatterlist *sg;
185 int frm_sz;
186 int sges_left, sg_done;
187 int chain_idx = MPT_HOST_NO_CHAIN;
188 int sgeOffset;
189 int numSgeSlots, numSgeThisFrame;
190 u32 sgflags, sgdir, thisxfer = 0;
191 int chain_dma_off = 0;
192 int newIndex;
193 int ii;
194 dma_addr_t v2;
195 u32 RequestNB;
196
197 sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK;
198 if (sgdir == MPI_SCSIIO_CONTROL_WRITE) {
199 sgdir = MPT_TRANSFER_HOST_TO_IOC;
200 } else {
201 sgdir = MPT_TRANSFER_IOC_TO_HOST;
202 }
203
204 psge = (char *) &pReq->SGL;
205 frm_sz = ioc->req_sz;
206
207 /* Map the data portion, if any.
208 * sges_left = 0 if no data transfer.
209 */
210 sges_left = scsi_dma_map(SCpnt);
211 if (sges_left < 0)
212 return FAILED;
213
214 /* Handle the SG case.
215 */
216 sg = scsi_sglist(SCpnt);
217 sg_done = 0;
218 sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION);
219 chainSge = NULL;
220
221 /* Prior to entering this loop - the following must be set
222 * current MF: sgeOffset (bytes)
223 * chainSge (Null if original MF is not a chain buffer)
224 * sg_done (num SGE done for this MF)
225 */
226
227 nextSGEset:
228 numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
229 numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
230
231 sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
232
233 /* Get first (num - 1) SG elements
234 * Skip any SG entries with a length of 0
235 * NOTE: at finish, sg and psge pointed to NEXT data/location positions
236 */
237 for (ii=0; ii < (numSgeThisFrame-1); ii++) {
238 thisxfer = sg_dma_len(sg);
239 if (thisxfer == 0) {
240 /* Get next SG element from the OS */
241 sg = sg_next(sg);
242 sg_done++;
243 continue;
244 }
245
246 v2 = sg_dma_address(sg);
247 ioc->add_sge(psge, sgflags | thisxfer, v2);
248
249 /* Get next SG element from the OS */
250 sg = sg_next(sg);
251 psge += ioc->SGE_size;
252 sgeOffset += ioc->SGE_size;
253 sg_done++;
254 }
255
256 if (numSgeThisFrame == sges_left) {
257 /* Add last element, end of buffer and end of list flags.
258 */
259 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT |
260 MPT_SGE_FLAGS_END_OF_BUFFER |
261 MPT_SGE_FLAGS_END_OF_LIST;
262
263 /* Add last SGE and set termination flags.
264 * Note: Last SGE may have a length of 0 - which should be ok.
265 */
266 thisxfer = sg_dma_len(sg);
267
268 v2 = sg_dma_address(sg);
269 ioc->add_sge(psge, sgflags | thisxfer, v2);
270 sgeOffset += ioc->SGE_size;
271 sg_done++;
272
273 if (chainSge) {
274 /* The current buffer is a chain buffer,
275 * but there is not another one.
276 * Update the chain element
277 * Offset and Length fields.
278 */
279 ioc->add_chain((char *)chainSge, 0, sgeOffset,
280 ioc->ChainBufferDMA + chain_dma_off);
281 } else {
282 /* The current buffer is the original MF
283 * and there is no Chain buffer.
284 */
285 pReq->ChainOffset = 0;
286 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
287 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
288 "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
289 ioc->RequestNB[req_idx] = RequestNB;
290 }
291 } else {
292 /* At least one chain buffer is needed.
293 * Complete the first MF
294 * - last SGE element, set the LastElement bit
295 * - set ChainOffset (words) for orig MF
296 * (OR finish previous MF chain buffer)
297 * - update MFStructPtr ChainIndex
298 * - Populate chain element
299 * Also
300 * Loop until done.
301 */
302
303 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n",
304 ioc->name, sg_done));
305
306 /* Set LAST_ELEMENT flag for last non-chain element
307 * in the buffer. Since psge points at the NEXT
308 * SGE element, go back one SGE element, update the flags
309 * and reset the pointer. (Note: sgflags & thisxfer are already
310 * set properly).
311 */
312 if (sg_done) {
313 u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
314 sgflags = le32_to_cpu(*ptmp);
315 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
316 *ptmp = cpu_to_le32(sgflags);
317 }
318
319 if (chainSge) {
320 /* The current buffer is a chain buffer.
321 * chainSge points to the previous Chain Element.
322 * Update its chain element Offset and Length (must
323 * include chain element size) fields.
324 * Old chain element is now complete.
325 */
326 u8 nextChain = (u8) (sgeOffset >> 2);
327 sgeOffset += ioc->SGE_size;
328 ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
329 ioc->ChainBufferDMA + chain_dma_off);
330 } else {
331 /* The original MF buffer requires a chain buffer -
332 * set the offset.
333 * Last element in this MF is a chain element.
334 */
335 pReq->ChainOffset = (u8) (sgeOffset >> 2);
336 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
337 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
338 ioc->RequestNB[req_idx] = RequestNB;
339 }
340
341 sges_left -= sg_done;
342
343
344 /* NOTE: psge points to the beginning of the chain element
345 * in current buffer. Get a chain buffer.
346 */
347 if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
348 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
349 "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
350 ioc->name, pReq->CDB[0], SCpnt));
351 return FAILED;
352 }
353
354 /* Update the tracking arrays.
355 * If chainSge == NULL, update ReqToChain, else ChainToChain
356 */
357 if (chainSge) {
358 ioc->ChainToChain[chain_idx] = newIndex;
359 } else {
360 ioc->ReqToChain[req_idx] = newIndex;
361 }
362 chain_idx = newIndex;
363 chain_dma_off = ioc->req_sz * chain_idx;
364
365 /* Populate the chainSGE for the current buffer.
366 * - Set chain buffer pointer to psge and fill
367 * out the Address and Flags fields.
368 */
369 chainSge = (char *) psge;
370 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)",
371 ioc->name, psge, req_idx));
372
373 /* Start the SGE for the next buffer
374 */
375 psge = (char *) (ioc->ChainBuffer + chain_dma_off);
376 sgeOffset = 0;
377 sg_done = 0;
378
379 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n",
380 ioc->name, psge, chain_idx));
381
382 /* Start the SGE for the next buffer
383 */
384
385 goto nextSGEset;
386 }
387
388 return SUCCESS;
389 } /* mptscsih_AddSGE() */
390
391 static void
392 mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
393 U32 SlotStatus)
394 {
395 MPT_FRAME_HDR *mf;
396 SEPRequest_t *SEPMsg;
397
398 if (ioc->bus_type != SAS)
399 return;
400
401 /* Not supported for hidden raid components
402 */
403 if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
404 return;
405
406 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
407 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
408 ioc->name,__func__));
409 return;
410 }
411
412 SEPMsg = (SEPRequest_t *)mf;
413 SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
414 SEPMsg->Bus = vtarget->channel;
415 SEPMsg->TargetID = vtarget->id;
416 SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS;
417 SEPMsg->SlotStatus = SlotStatus;
418 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
419 "Sending SEP cmd=%x channel=%d id=%d\n",
420 ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID));
421 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
422 }
423
424 #ifdef CONFIG_FUSION_LOGGING
425 /**
426 * mptscsih_info_scsiio - debug print info on reply frame
427 * @ioc: Pointer to MPT_ADAPTER structure
428 * @sc: original scsi cmnd pointer
429 * @pScsiReply: Pointer to MPT reply frame
430 *
431 * MPT_DEBUG_REPLY needs to be enabled to obtain this info
432 *
433 * Refer to lsi/mpi.h.
434 **/
435 static void
436 mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pScsiReply)
437 {
438 char *desc = NULL;
439 char *desc1 = NULL;
440 u16 ioc_status;
441 u8 skey, asc, ascq;
442
443 ioc_status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
444
445 switch (ioc_status) {
446
447 case MPI_IOCSTATUS_SUCCESS:
448 desc = "success";
449 break;
450 case MPI_IOCSTATUS_SCSI_INVALID_BUS:
451 desc = "invalid bus";
452 break;
453 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:
454 desc = "invalid target_id";
455 break;
456 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
457 desc = "device not there";
458 break;
459 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:
460 desc = "data overrun";
461 break;
462 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
463 desc = "data underrun";
464 break;
465 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:
466 desc = "I/O data error";
467 break;
468 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:
469 desc = "protocol error";
470 break;
471 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:
472 desc = "task terminated";
473 break;
474 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
475 desc = "residual mismatch";
476 break;
477 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
478 desc = "task management failed";
479 break;
480 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:
481 desc = "IOC terminated";
482 break;
483 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:
484 desc = "ext terminated";
485 break;
486 default:
487 desc = "";
488 break;
489 }
490
491 switch (pScsiReply->SCSIStatus)
492 {
493
494 case MPI_SCSI_STATUS_SUCCESS:
495 desc1 = "success";
496 break;
497 case MPI_SCSI_STATUS_CHECK_CONDITION:
498 desc1 = "check condition";
499 break;
500 case MPI_SCSI_STATUS_CONDITION_MET:
501 desc1 = "condition met";
502 break;
503 case MPI_SCSI_STATUS_BUSY:
504 desc1 = "busy";
505 break;
506 case MPI_SCSI_STATUS_INTERMEDIATE:
507 desc1 = "intermediate";
508 break;
509 case MPI_SCSI_STATUS_INTERMEDIATE_CONDMET:
510 desc1 = "intermediate condmet";
511 break;
512 case MPI_SCSI_STATUS_RESERVATION_CONFLICT:
513 desc1 = "reservation conflict";
514 break;
515 case MPI_SCSI_STATUS_COMMAND_TERMINATED:
516 desc1 = "command terminated";
517 break;
518 case MPI_SCSI_STATUS_TASK_SET_FULL:
519 desc1 = "task set full";
520 break;
521 case MPI_SCSI_STATUS_ACA_ACTIVE:
522 desc1 = "aca active";
523 break;
524 case MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT:
525 desc1 = "fcpext device logged out";
526 break;
527 case MPI_SCSI_STATUS_FCPEXT_NO_LINK:
528 desc1 = "fcpext no link";
529 break;
530 case MPI_SCSI_STATUS_FCPEXT_UNASSIGNED:
531 desc1 = "fcpext unassigned";
532 break;
533 default:
534 desc1 = "";
535 break;
536 }
537
538 scsi_print_command(sc);
539 printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n",
540 ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
541 printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
542 "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
543 scsi_get_resid(sc));
544 printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
545 "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
546 le32_to_cpu(pScsiReply->TransferCount), sc->result);
547
548 printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
549 "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
550 ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
551 pScsiReply->SCSIState);
552
553 if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
554 skey = sc->sense_buffer[2] & 0x0F;
555 asc = sc->sense_buffer[12];
556 ascq = sc->sense_buffer[13];
557
558 printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: "
559 "[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq);
560 }
561
562 /*
563 * Look for + dump FCP ResponseInfo[]!
564 */
565 if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
566 pScsiReply->ResponseInfo)
567 printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n",
568 ioc->name, le32_to_cpu(pScsiReply->ResponseInfo));
569 }
570 #endif
571
572 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
573 /*
574 * mptscsih_io_done - Main SCSI IO callback routine registered to
575 * Fusion MPT (base) driver
576 * @ioc: Pointer to MPT_ADAPTER structure
577 * @mf: Pointer to original MPT request frame
578 * @r: Pointer to MPT reply frame (NULL if TurboReply)
579 *
580 * This routine is called from mpt.c::mpt_interrupt() at the completion
581 * of any SCSI IO request.
582 * This routine is registered with the Fusion MPT (base) driver at driver
583 * load/init time via the mpt_register() API call.
584 *
585 * Returns 1 indicating alloc'd request frame ptr should be freed.
586 */
587 int
588 mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
589 {
590 struct scsi_cmnd *sc;
591 MPT_SCSI_HOST *hd;
592 SCSIIORequest_t *pScsiReq;
593 SCSIIOReply_t *pScsiReply;
594 u16 req_idx, req_idx_MR;
595 VirtDevice *vdevice;
596 VirtTarget *vtarget;
597
598 hd = shost_priv(ioc->sh);
599 req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
600 req_idx_MR = (mr != NULL) ?
601 le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
602
603 /* Special case, where already freed message frame is received from
604 * Firmware. It happens with Resetting IOC.
605 * Return immediately. Do not care
606 */
607 if ((req_idx != req_idx_MR) ||
608 (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
609 return 0;
610
611 sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
612 if (sc == NULL) {
613 MPIHeader_t *hdr = (MPIHeader_t *)mf;
614
615 /* Remark: writeSDP1 will use the ScsiDoneCtx
616 * If a SCSI I/O cmd, device disabled by OS and
617 * completion done. Cannot touch sc struct. Just free mem.
618 */
619 if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST)
620 printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n",
621 ioc->name);
622
623 mptscsih_freeChainBuffers(ioc, req_idx);
624 return 1;
625 }
626
627 if ((unsigned char *)mf != sc->host_scribble) {
628 mptscsih_freeChainBuffers(ioc, req_idx);
629 return 1;
630 }
631
632 if (ioc->bus_type == SAS) {
633 VirtDevice *vdevice = sc->device->hostdata;
634
635 if (!vdevice || !vdevice->vtarget ||
636 vdevice->vtarget->deleted) {
637 sc->result = DID_NO_CONNECT << 16;
638 goto out;
639 }
640 }
641
642 sc->host_scribble = NULL;
643 sc->result = DID_OK << 16; /* Set default reply as OK */
644 pScsiReq = (SCSIIORequest_t *) mf;
645 pScsiReply = (SCSIIOReply_t *) mr;
646
647 if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
648 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
649 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
650 ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
651 }else{
652 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
653 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
654 ioc->name, mf, mr, sc, req_idx));
655 }
656
657 if (pScsiReply == NULL) {
658 /* special context reply handling */
659 ;
660 } else {
661 u32 xfer_cnt;
662 u16 status;
663 u8 scsi_state, scsi_status;
664 u32 log_info;
665
666 status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
667
668 scsi_state = pScsiReply->SCSIState;
669 scsi_status = pScsiReply->SCSIStatus;
670 xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
671 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
672 log_info = le32_to_cpu(pScsiReply->IOCLogInfo);
673
674 /*
675 * if we get a data underrun indication, yet no data was
676 * transferred and the SCSI status indicates that the
677 * command was never started, change the data underrun
678 * to success
679 */
680 if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
681 (scsi_status == MPI_SCSI_STATUS_BUSY ||
682 scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
683 scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
684 status = MPI_IOCSTATUS_SUCCESS;
685 }
686
687 if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
688 mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
689
690 /*
691 * Look for + dump FCP ResponseInfo[]!
692 */
693 if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
694 pScsiReply->ResponseInfo) {
695 printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] "
696 "FCP_ResponseInfo=%08xh\n", ioc->name,
697 sc->device->host->host_no, sc->device->channel,
698 sc->device->id, sc->device->lun,
699 le32_to_cpu(pScsiReply->ResponseInfo));
700 }
701
702 switch(status) {
703 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
704 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
705 /* CHECKME!
706 * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
707 * But not: DID_BUS_BUSY lest one risk
708 * killing interrupt handler:-(
709 */
710 sc->result = SAM_STAT_BUSY;
711 break;
712
713 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
714 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
715 sc->result = DID_BAD_TARGET << 16;
716 break;
717
718 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
719 /* Spoof to SCSI Selection Timeout! */
720 if (ioc->bus_type != FC)
721 sc->result = DID_NO_CONNECT << 16;
722 /* else fibre, just stall until rescan event */
723 else
724 sc->result = DID_REQUEUE << 16;
725
726 if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
727 hd->sel_timeout[pScsiReq->TargetID]++;
728
729 vdevice = sc->device->hostdata;
730 if (!vdevice)
731 break;
732 vtarget = vdevice->vtarget;
733 if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) {
734 mptscsih_issue_sep_command(ioc, vtarget,
735 MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED);
736 vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON;
737 }
738 break;
739
740 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
741 if ( ioc->bus_type == SAS ) {
742 u16 ioc_status =
743 le16_to_cpu(pScsiReply->IOCStatus);
744 if ((ioc_status &
745 MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
746 &&
747 ((log_info & SAS_LOGINFO_MASK) ==
748 SAS_LOGINFO_NEXUS_LOSS)) {
749 VirtDevice *vdevice =
750 sc->device->hostdata;
751
752 /* flag the device as being in
753 * device removal delay so we can
754 * notify the midlayer to hold off
755 * on timeout eh */
756 if (vdevice && vdevice->
757 vtarget &&
758 vdevice->vtarget->
759 raidVolume)
760 printk(KERN_INFO
761 "Skipping Raid Volume"
762 "for inDMD\n");
763 else if (vdevice &&
764 vdevice->vtarget)
765 vdevice->vtarget->
766 inDMD = 1;
767
768 sc->result =
769 (DID_TRANSPORT_DISRUPTED
770 << 16);
771 break;
772 }
773 } else if (ioc->bus_type == FC) {
774 /*
775 * The FC IOC may kill a request for variety of
776 * reasons, some of which may be recovered by a
777 * retry, some which are unlikely to be
778 * recovered. Return DID_ERROR instead of
779 * DID_RESET to permit retry of the command,
780 * just not an infinite number of them
781 */
782 sc->result = DID_ERROR << 16;
783 break;
784 }
785
786 /*
787 * Allow non-SAS & non-NEXUS_LOSS to drop into below code
788 */
789
790 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
791 /* Linux handles an unsolicited DID_RESET better
792 * than an unsolicited DID_ABORT.
793 */
794 sc->result = DID_RESET << 16;
795 break;
796
797 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
798 if (ioc->bus_type == FC)
799 sc->result = DID_ERROR << 16;
800 else
801 sc->result = DID_RESET << 16;
802 break;
803
804 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
805 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
806 if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
807 sc->result=DID_SOFT_ERROR << 16;
808 else /* Sufficient data transfer occurred */
809 sc->result = (DID_OK << 16) | scsi_status;
810 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
811 "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
812 ioc->name, sc->result, sc->device->channel, sc->device->id));
813 break;
814
815 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
816 /*
817 * Do upfront check for valid SenseData and give it
818 * precedence!
819 */
820 sc->result = (DID_OK << 16) | scsi_status;
821 if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
822
823 /*
824 * For an Errata on LSI53C1030
825 * When the length of request data
826 * and transfer data are different
827 * with result of command (READ or VERIFY),
828 * DID_SOFT_ERROR is set.
829 */
830 if (ioc->bus_type == SPI) {
831 if ((pScsiReq->CDB[0] == READ_6 && ((pScsiReq->CDB[1] & 0x02) == 0)) ||
832 pScsiReq->CDB[0] == READ_10 ||
833 pScsiReq->CDB[0] == READ_12 ||
834 (pScsiReq->CDB[0] == READ_16 &&
835 ((pScsiReq->CDB[1] & 0x02) == 0)) ||
836 pScsiReq->CDB[0] == VERIFY ||
837 pScsiReq->CDB[0] == VERIFY_16) {
838 if (scsi_bufflen(sc) !=
839 xfer_cnt) {
840 sc->result =
841 DID_SOFT_ERROR << 16;
842 printk(KERN_WARNING "Errata"
843 "on LSI53C1030 occurred."
844 "sc->req_bufflen=0x%02x,"
845 "xfer_cnt=0x%02x\n",
846 scsi_bufflen(sc),
847 xfer_cnt);
848 }
849 }
850 }
851
852 if (xfer_cnt < sc->underflow) {
853 if (scsi_status == SAM_STAT_BUSY)
854 sc->result = SAM_STAT_BUSY;
855 else
856 sc->result = DID_SOFT_ERROR << 16;
857 }
858 if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
859 /* What to do?
860 */
861 sc->result = DID_SOFT_ERROR << 16;
862 }
863 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
864 /* Not real sure here either... */
865 sc->result = DID_RESET << 16;
866 }
867 }
868
869
870 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
871 " sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
872 ioc->name, sc->underflow));
873 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
874 " ActBytesXferd=%02xh\n", ioc->name, xfer_cnt));
875
876 /* Report Queue Full
877 */
878 if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)
879 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
880
881 break;
882
883 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
884 scsi_set_resid(sc, 0);
885 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
886 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
887 sc->result = (DID_OK << 16) | scsi_status;
888 if (scsi_state == 0) {
889 ;
890 } else if (scsi_state &
891 MPI_SCSI_STATE_AUTOSENSE_VALID) {
892
893 /*
894 * For potential trouble on LSI53C1030.
895 * (date:2007.xx.)
896 * It is checked whether the length of
897 * request data is equal to
898 * the length of transfer and residual.
899 * MEDIUM_ERROR is set by incorrect data.
900 */
901 if ((ioc->bus_type == SPI) &&
902 (sc->sense_buffer[2] & 0x20)) {
903 u32 difftransfer;
904 difftransfer =
905 sc->sense_buffer[3] << 24 |
906 sc->sense_buffer[4] << 16 |
907 sc->sense_buffer[5] << 8 |
908 sc->sense_buffer[6];
909 if (((sc->sense_buffer[3] & 0x80) ==
910 0x80) && (scsi_bufflen(sc)
911 != xfer_cnt)) {
912 sc->sense_buffer[2] =
913 MEDIUM_ERROR;
914 sc->sense_buffer[12] = 0xff;
915 sc->sense_buffer[13] = 0xff;
916 printk(KERN_WARNING"Errata"
917 "on LSI53C1030 occurred."
918 "sc->req_bufflen=0x%02x,"
919 "xfer_cnt=0x%02x\n" ,
920 scsi_bufflen(sc),
921 xfer_cnt);
922 }
923 if (((sc->sense_buffer[3] & 0x80)
924 != 0x80) &&
925 (scsi_bufflen(sc) !=
926 xfer_cnt + difftransfer)) {
927 sc->sense_buffer[2] =
928 MEDIUM_ERROR;
929 sc->sense_buffer[12] = 0xff;
930 sc->sense_buffer[13] = 0xff;
931 printk(KERN_WARNING
932 "Errata on LSI53C1030 occurred"
933 "sc->req_bufflen=0x%02x,"
934 " xfer_cnt=0x%02x,"
935 "difftransfer=0x%02x\n",
936 scsi_bufflen(sc),
937 xfer_cnt,
938 difftransfer);
939 }
940 }
941
942 /*
943 * If running against circa 200003dd 909 MPT f/w,
944 * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
945 * (QUEUE_FULL) returned from device! --> get 0x0000?128
946 * and with SenseBytes set to 0.
947 */
948 if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL)
949 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
950
951 }
952 else if (scsi_state &
953 (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)
954 ) {
955 /*
956 * What to do?
957 */
958 sc->result = DID_SOFT_ERROR << 16;
959 }
960 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
961 /* Not real sure here either... */
962 sc->result = DID_RESET << 16;
963 }
964 else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
965 /* Device Inq. data indicates that it supports
966 * QTags, but rejects QTag messages.
967 * This command completed OK.
968 *
969 * Not real sure here either so do nothing... */
970 }
971
972 if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL)
973 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
974
975 /* Add handling of:
976 * Reservation Conflict, Busy,
977 * Command Terminated, CHECK
978 */
979 break;
980
981 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
982 sc->result = DID_SOFT_ERROR << 16;
983 break;
984
985 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
986 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
987 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
988 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
989 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
990 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
991 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
992 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
993 default:
994 /*
995 * What to do?
996 */
997 sc->result = DID_SOFT_ERROR << 16;
998 break;
999
1000 } /* switch(status) */
1001
1002 #ifdef CONFIG_FUSION_LOGGING
1003 if (sc->result && (ioc->debug_level & MPT_DEBUG_REPLY))
1004 mptscsih_info_scsiio(ioc, sc, pScsiReply);
1005 #endif
1006
1007 } /* end of address reply case */
1008 out:
1009 /* Unmap the DMA buffers, if any. */
1010 scsi_dma_unmap(sc);
1011
1012 sc->scsi_done(sc); /* Issue the command callback */
1013
1014 /* Free Chain buffers */
1015 mptscsih_freeChainBuffers(ioc, req_idx);
1016 return 1;
1017 }
1018
1019 /*
1020 * mptscsih_flush_running_cmds - For each command found, search
1021 * Scsi_Host instance taskQ and reply to OS.
1022 * Called only if recovering from a FW reload.
1023 * @hd: Pointer to a SCSI HOST structure
1024 *
1025 * Returns: None.
1026 *
1027 * Must be called while new I/Os are being queued.
1028 */
1029 void
1030 mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
1031 {
1032 MPT_ADAPTER *ioc = hd->ioc;
1033 struct scsi_cmnd *sc;
1034 SCSIIORequest_t *mf = NULL;
1035 int ii;
1036 int channel, id;
1037
1038 for (ii= 0; ii < ioc->req_depth; ii++) {
1039 sc = mptscsih_getclear_scsi_lookup(ioc, ii);
1040 if (!sc)
1041 continue;
1042 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1043 if (!mf)
1044 continue;
1045 channel = mf->Bus;
1046 id = mf->TargetID;
1047 mptscsih_freeChainBuffers(ioc, ii);
1048 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1049 if ((unsigned char *)mf != sc->host_scribble)
1050 continue;
1051 scsi_dma_unmap(sc);
1052 sc->result = DID_RESET << 16;
1053 sc->host_scribble = NULL;
1054 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
1055 "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
1056 "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
1057 sc->scsi_done(sc);
1058 }
1059 }
1060 EXPORT_SYMBOL(mptscsih_flush_running_cmds);
1061
1062 /*
1063 * mptscsih_search_running_cmds - Delete any commands associated
1064 * with the specified target and lun. Function called only
1065 * when a lun is disable by mid-layer.
1066 * Do NOT access the referenced scsi_cmnd structure or
1067 * members. Will cause either a paging or NULL ptr error.
1068 * (BUT, BUT, BUT, the code does reference it! - mdr)
1069 * @hd: Pointer to a SCSI HOST structure
1070 * @vdevice: per device private data
1071 *
1072 * Returns: None.
1073 *
1074 * Called from slave_destroy.
1075 */
1076 static void
1077 mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
1078 {
1079 SCSIIORequest_t *mf = NULL;
1080 int ii;
1081 struct scsi_cmnd *sc;
1082 struct scsi_lun lun;
1083 MPT_ADAPTER *ioc = hd->ioc;
1084 unsigned long flags;
1085
1086 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1087 for (ii = 0; ii < ioc->req_depth; ii++) {
1088 if ((sc = ioc->ScsiLookup[ii]) != NULL) {
1089
1090 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1091 if (mf == NULL)
1092 continue;
1093 /* If the device is a hidden raid component, then its
1094 * expected that the mf->function will be RAID_SCSI_IO
1095 */
1096 if (vdevice->vtarget->tflags &
1097 MPT_TARGET_FLAGS_RAID_COMPONENT && mf->Function !=
1098 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)
1099 continue;
1100
1101 int_to_scsilun(vdevice->lun, &lun);
1102 if ((mf->Bus != vdevice->vtarget->channel) ||
1103 (mf->TargetID != vdevice->vtarget->id) ||
1104 memcmp(lun.scsi_lun, mf->LUN, 8))
1105 continue;
1106
1107 if ((unsigned char *)mf != sc->host_scribble)
1108 continue;
1109 ioc->ScsiLookup[ii] = NULL;
1110 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1111 mptscsih_freeChainBuffers(ioc, ii);
1112 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1113 scsi_dma_unmap(sc);
1114 sc->host_scribble = NULL;
1115 sc->result = DID_NO_CONNECT << 16;
1116 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
1117 MYIOC_s_FMT "completing cmds: fw_channel %d, "
1118 "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
1119 vdevice->vtarget->channel, vdevice->vtarget->id,
1120 sc, mf, ii));
1121 sc->scsi_done(sc);
1122 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1123 }
1124 }
1125 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1126 return;
1127 }
1128
1129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1130
1131 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1132 /*
1133 * mptscsih_report_queue_full - Report QUEUE_FULL status returned
1134 * from a SCSI target device.
1135 * @sc: Pointer to scsi_cmnd structure
1136 * @pScsiReply: Pointer to SCSIIOReply_t
1137 * @pScsiReq: Pointer to original SCSI request
1138 *
1139 * This routine periodically reports QUEUE_FULL status returned from a
1140 * SCSI target device. It reports this to the console via kernel
1141 * printk() API call, not more than once every 10 seconds.
1142 */
1143 static void
1144 mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq)
1145 {
1146 long time = jiffies;
1147 MPT_SCSI_HOST *hd;
1148 MPT_ADAPTER *ioc;
1149
1150 if (sc->device == NULL)
1151 return;
1152 if (sc->device->host == NULL)
1153 return;
1154 if ((hd = shost_priv(sc->device->host)) == NULL)
1155 return;
1156 ioc = hd->ioc;
1157 if (time - hd->last_queue_full > 10 * HZ) {
1158 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n",
1159 ioc->name, 0, sc->device->id, sc->device->lun));
1160 hd->last_queue_full = time;
1161 }
1162 }
1163
1164 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1165 /*
1166 * mptscsih_remove - Removed scsi devices
1167 * @pdev: Pointer to pci_dev structure
1168 *
1169 *
1170 */
1171 void
1172 mptscsih_remove(struct pci_dev *pdev)
1173 {
1174 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1175 struct Scsi_Host *host = ioc->sh;
1176 MPT_SCSI_HOST *hd;
1177 int sz1;
1178
1179 scsi_remove_host(host);
1180
1181 if((hd = shost_priv(host)) == NULL)
1182 return;
1183
1184 mptscsih_shutdown(pdev);
1185
1186 sz1=0;
1187
1188 if (ioc->ScsiLookup != NULL) {
1189 sz1 = ioc->req_depth * sizeof(void *);
1190 kfree(ioc->ScsiLookup);
1191 ioc->ScsiLookup = NULL;
1192 }
1193
1194 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1195 "Free'd ScsiLookup (%d) memory\n",
1196 ioc->name, sz1));
1197
1198 kfree(hd->info_kbuf);
1199
1200 /* NULL the Scsi_Host pointer
1201 */
1202 ioc->sh = NULL;
1203
1204 scsi_host_put(host);
1205
1206 mpt_detach(pdev);
1207
1208 }
1209
1210 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1211 /*
1212 * mptscsih_shutdown - reboot notifier
1213 *
1214 */
1215 void
1216 mptscsih_shutdown(struct pci_dev *pdev)
1217 {
1218 }
1219
1220 #ifdef CONFIG_PM
1221 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1222 /*
1223 * mptscsih_suspend - Fusion MPT scsi driver suspend routine.
1224 *
1225 *
1226 */
1227 int
1228 mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
1229 {
1230 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1231
1232 scsi_block_requests(ioc->sh);
1233 flush_scheduled_work();
1234 mptscsih_shutdown(pdev);
1235 return mpt_suspend(pdev,state);
1236 }
1237
1238 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1239 /*
1240 * mptscsih_resume - Fusion MPT scsi driver resume routine.
1241 *
1242 *
1243 */
1244 int
1245 mptscsih_resume(struct pci_dev *pdev)
1246 {
1247 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1248 int rc;
1249
1250 rc = mpt_resume(pdev);
1251 scsi_unblock_requests(ioc->sh);
1252 return rc;
1253 }
1254
1255 #endif
1256
1257 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1258 /**
1259 * mptscsih_info - Return information about MPT adapter
1260 * @SChost: Pointer to Scsi_Host structure
1261 *
1262 * (linux scsi_host_template.info routine)
1263 *
1264 * Returns pointer to buffer where information was written.
1265 */
1266 const char *
1267 mptscsih_info(struct Scsi_Host *SChost)
1268 {
1269 MPT_SCSI_HOST *h;
1270 int size = 0;
1271
1272 h = shost_priv(SChost);
1273
1274 if (h->info_kbuf == NULL)
1275 if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL)
1276 return h->info_kbuf;
1277 h->info_kbuf[0] = '\0';
1278
1279 mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0);
1280 h->info_kbuf[size-1] = '\0';
1281
1282 return h->info_kbuf;
1283 }
1284
1285 int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host)
1286 {
1287 MPT_SCSI_HOST *hd = shost_priv(host);
1288 MPT_ADAPTER *ioc = hd->ioc;
1289
1290 seq_printf(m, "%s: %s, ", ioc->name, ioc->prod_name);
1291 seq_printf(m, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word);
1292 seq_printf(m, "Ports=%d, ", ioc->facts.NumberOfPorts);
1293 seq_printf(m, "MaxQ=%d\n", ioc->req_depth);
1294
1295 return 0;
1296 }
1297
1298 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1299 #define ADD_INDEX_LOG(req_ent) do { } while(0)
1300
1301 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1302 /**
1303 * mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine.
1304 * @SCpnt: Pointer to scsi_cmnd structure
1305 *
1306 * (linux scsi_host_template.queuecommand routine)
1307 * This is the primary SCSI IO start routine. Create a MPI SCSIIORequest
1308 * from a linux scsi_cmnd request and send it to the IOC.
1309 *
1310 * Returns 0. (rtn value discarded by linux scsi mid-layer)
1311 */
1312 int
1313 mptscsih_qcmd(struct scsi_cmnd *SCpnt)
1314 {
1315 MPT_SCSI_HOST *hd;
1316 MPT_FRAME_HDR *mf;
1317 SCSIIORequest_t *pScsiReq;
1318 VirtDevice *vdevice = SCpnt->device->hostdata;
1319 u32 datalen;
1320 u32 scsictl;
1321 u32 scsidir;
1322 u32 cmd_len;
1323 int my_idx;
1324 int ii;
1325 MPT_ADAPTER *ioc;
1326
1327 hd = shost_priv(SCpnt->device->host);
1328 ioc = hd->ioc;
1329
1330 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n",
1331 ioc->name, SCpnt));
1332
1333 if (ioc->taskmgmt_quiesce_io)
1334 return SCSI_MLQUEUE_HOST_BUSY;
1335
1336 /*
1337 * Put together a MPT SCSI request...
1338 */
1339 if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
1340 dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
1341 ioc->name));
1342 return SCSI_MLQUEUE_HOST_BUSY;
1343 }
1344
1345 pScsiReq = (SCSIIORequest_t *) mf;
1346
1347 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
1348
1349 ADD_INDEX_LOG(my_idx);
1350
1351 /* TUR's being issued with scsictl=0x02000000 (DATA_IN)!
1352 * Seems we may receive a buffer (datalen>0) even when there
1353 * will be no data transfer! GRRRRR...
1354 */
1355 if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
1356 datalen = scsi_bufflen(SCpnt);
1357 scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */
1358 } else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
1359 datalen = scsi_bufflen(SCpnt);
1360 scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */
1361 } else {
1362 datalen = 0;
1363 scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER;
1364 }
1365
1366 /* Default to untagged. Once a target structure has been allocated,
1367 * use the Inquiry data to determine if device supports tagged.
1368 */
1369 if ((vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) &&
1370 SCpnt->device->tagged_supported)
1371 scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
1372 else
1373 scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
1374
1375
1376 /* Use the above information to set up the message frame
1377 */
1378 pScsiReq->TargetID = (u8) vdevice->vtarget->id;
1379 pScsiReq->Bus = vdevice->vtarget->channel;
1380 pScsiReq->ChainOffset = 0;
1381 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
1382 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
1383 else
1384 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
1385 pScsiReq->CDBLength = SCpnt->cmd_len;
1386 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
1387 pScsiReq->Reserved = 0;
1388 pScsiReq->MsgFlags = mpt_msg_flags(ioc);
1389 int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
1390 pScsiReq->Control = cpu_to_le32(scsictl);
1391
1392 /*
1393 * Write SCSI CDB into the message
1394 */
1395 cmd_len = SCpnt->cmd_len;
1396 for (ii=0; ii < cmd_len; ii++)
1397 pScsiReq->CDB[ii] = SCpnt->cmnd[ii];
1398
1399 for (ii=cmd_len; ii < 16; ii++)
1400 pScsiReq->CDB[ii] = 0;
1401
1402 /* DataLength */
1403 pScsiReq->DataLength = cpu_to_le32(datalen);
1404
1405 /* SenseBuffer low address */
1406 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
1407 + (my_idx * MPT_SENSE_BUFFER_ALLOC));
1408
1409 /* Now add the SG list
1410 * Always have a SGE even if null length.
1411 */
1412 if (datalen == 0) {
1413 /* Add a NULL SGE */
1414 ioc->add_sge((char *)&pScsiReq->SGL,
1415 MPT_SGE_FLAGS_SSIMPLE_READ | 0,
1416 (dma_addr_t) -1);
1417 } else {
1418 /* Add a 32 or 64 bit SGE */
1419 if (mptscsih_AddSGE(ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
1420 goto fail;
1421 }
1422
1423 SCpnt->host_scribble = (unsigned char *)mf;
1424 mptscsih_set_scsi_lookup(ioc, my_idx, SCpnt);
1425
1426 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
1427 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
1428 ioc->name, SCpnt, mf, my_idx));
1429 DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf);
1430 return 0;
1431
1432 fail:
1433 mptscsih_freeChainBuffers(ioc, my_idx);
1434 mpt_free_msg_frame(ioc, mf);
1435 return SCSI_MLQUEUE_HOST_BUSY;
1436 }
1437
1438 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1439 /*
1440 * mptscsih_freeChainBuffers - Function to free chain buffers associated
1441 * with a SCSI IO request
1442 * @hd: Pointer to the MPT_SCSI_HOST instance
1443 * @req_idx: Index of the SCSI IO request frame.
1444 *
1445 * Called if SG chain buffer allocation fails and mptscsih callbacks.
1446 * No return.
1447 */
1448 static void
1449 mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
1450 {
1451 MPT_FRAME_HDR *chain;
1452 unsigned long flags;
1453 int chain_idx;
1454 int next;
1455
1456 /* Get the first chain index and reset
1457 * tracker state.
1458 */
1459 chain_idx = ioc->ReqToChain[req_idx];
1460 ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN;
1461
1462 while (chain_idx != MPT_HOST_NO_CHAIN) {
1463
1464 /* Save the next chain buffer index */
1465 next = ioc->ChainToChain[chain_idx];
1466
1467 /* Free this chain buffer and reset
1468 * tracker
1469 */
1470 ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN;
1471
1472 chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer
1473 + (chain_idx * ioc->req_sz));
1474
1475 spin_lock_irqsave(&ioc->FreeQlock, flags);
1476 list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ);
1477 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1478
1479 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n",
1480 ioc->name, chain_idx));
1481
1482 /* handle next */
1483 chain_idx = next;
1484 }
1485 return;
1486 }
1487
1488 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1489 /*
1490 * Reset Handling
1491 */
1492
1493 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1494 /**
1495 * mptscsih_IssueTaskMgmt - Generic send Task Management function.
1496 * @hd: Pointer to MPT_SCSI_HOST structure
1497 * @type: Task Management type
1498 * @channel: channel number for task management
1499 * @id: Logical Target ID for reset (if appropriate)
1500 * @lun: Logical Unit for reset (if appropriate)
1501 * @ctx2abort: Context for the task to be aborted (if appropriate)
1502 * @timeout: timeout for task management control
1503 *
1504 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
1505 * or a non-interrupt thread. In the former, must not call schedule().
1506 *
1507 * Not all fields are meaningfull for all task types.
1508 *
1509 * Returns 0 for SUCCESS, or FAILED.
1510 *
1511 **/
1512 int
1513 mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, u64 lun,
1514 int ctx2abort, ulong timeout)
1515 {
1516 MPT_FRAME_HDR *mf;
1517 SCSITaskMgmt_t *pScsiTm;
1518 int ii;
1519 int retval;
1520 MPT_ADAPTER *ioc = hd->ioc;
1521 unsigned long timeleft;
1522 u8 issue_hard_reset;
1523 u32 ioc_raw_state;
1524 unsigned long time_count;
1525
1526 issue_hard_reset = 0;
1527 ioc_raw_state = mpt_GetIocState(ioc, 0);
1528
1529 if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
1530 printk(MYIOC_s_WARN_FMT
1531 "TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
1532 ioc->name, type, ioc_raw_state);
1533 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
1534 ioc->name, __func__);
1535 if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
1536 printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
1537 "FAILED!!\n", ioc->name);
1538 return 0;
1539 }
1540
1541 /* DOORBELL ACTIVE check is not required if
1542 * MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported.
1543 */
1544
1545 if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q)
1546 && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) &&
1547 (ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
1548 printk(MYIOC_s_WARN_FMT
1549 "TaskMgmt type=%x: ioc_state: "
1550 "DOORBELL_ACTIVE (0x%x)!\n",
1551 ioc->name, type, ioc_raw_state);
1552 return FAILED;
1553 }
1554
1555 mutex_lock(&ioc->taskmgmt_cmds.mutex);
1556 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
1557 mf = NULL;
1558 retval = FAILED;
1559 goto out;
1560 }
1561
1562 /* Return Fail to calling function if no message frames available.
1563 */
1564 if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
1565 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1566 "TaskMgmt no msg frames!!\n", ioc->name));
1567 retval = FAILED;
1568 mpt_clear_taskmgmt_in_progress_flag(ioc);
1569 goto out;
1570 }
1571 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
1572 ioc->name, mf));
1573
1574 /* Format the Request
1575 */
1576 pScsiTm = (SCSITaskMgmt_t *) mf;
1577 pScsiTm->TargetID = id;
1578 pScsiTm->Bus = channel;
1579 pScsiTm->ChainOffset = 0;
1580 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
1581
1582 pScsiTm->Reserved = 0;
1583 pScsiTm->TaskType = type;
1584 pScsiTm->Reserved1 = 0;
1585 pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
1586 ? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;
1587
1588 int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
1589
1590 for (ii=0; ii < 7; ii++)
1591 pScsiTm->Reserved2[ii] = 0;
1592
1593 pScsiTm->TaskMsgContext = ctx2abort;
1594
1595 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
1596 "task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
1597 type, timeout));
1598
1599 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
1600
1601 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1602 time_count = jiffies;
1603 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
1604 (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
1605 mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
1606 else {
1607 retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
1608 sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
1609 if (retval) {
1610 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1611 "TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
1612 ioc->name, mf, retval));
1613 mpt_free_msg_frame(ioc, mf);
1614 mpt_clear_taskmgmt_in_progress_flag(ioc);
1615 goto out;
1616 }
1617 }
1618
1619 timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
1620 timeout*HZ);
1621 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
1622 retval = FAILED;
1623 dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
1624 "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
1625 mpt_clear_taskmgmt_in_progress_flag(ioc);
1626 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
1627 goto out;
1628 issue_hard_reset = 1;
1629 goto out;
1630 }
1631
1632 retval = mptscsih_taskmgmt_reply(ioc, type,
1633 (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
1634
1635 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1636 "TaskMgmt completed (%d seconds)\n",
1637 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
1638
1639 out:
1640
1641 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1642 if (issue_hard_reset) {
1643 printk(MYIOC_s_WARN_FMT
1644 "Issuing Reset from %s!! doorbell=0x%08x\n",
1645 ioc->name, __func__, mpt_GetIocState(ioc, 0));
1646 retval = (ioc->bus_type == SAS) ?
1647 mpt_HardResetHandler(ioc, CAN_SLEEP) :
1648 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1649 mpt_free_msg_frame(ioc, mf);
1650 }
1651
1652 retval = (retval == 0) ? 0 : FAILED;
1653 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
1654 return retval;
1655 }
1656 EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
1657
1658 static int
1659 mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
1660 {
1661 switch (ioc->bus_type) {
1662 case FC:
1663 return 40;
1664 case SAS:
1665 return 30;
1666 case SPI:
1667 default:
1668 return 10;
1669 }
1670 }
1671
1672 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1673 /**
1674 * mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
1675 * @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted
1676 *
1677 * (linux scsi_host_template.eh_abort_handler routine)
1678 *
1679 * Returns SUCCESS or FAILED.
1680 **/
1681 int
1682 mptscsih_abort(struct scsi_cmnd * SCpnt)
1683 {
1684 MPT_SCSI_HOST *hd;
1685 MPT_FRAME_HDR *mf;
1686 u32 ctx2abort;
1687 int scpnt_idx;
1688 int retval;
1689 VirtDevice *vdevice;
1690 MPT_ADAPTER *ioc;
1691
1692 /* If we can't locate our host adapter structure, return FAILED status.
1693 */
1694 if ((hd = shost_priv(SCpnt->device->host)) == NULL) {
1695 SCpnt->result = DID_RESET << 16;
1696 SCpnt->scsi_done(SCpnt);
1697 printk(KERN_ERR MYNAM ": task abort: "
1698 "can't locate host! (sc=%p)\n", SCpnt);
1699 return FAILED;
1700 }
1701
1702 ioc = hd->ioc;
1703 printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n",
1704 ioc->name, SCpnt);
1705 scsi_print_command(SCpnt);
1706
1707 vdevice = SCpnt->device->hostdata;
1708 if (!vdevice || !vdevice->vtarget) {
1709 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1710 "task abort: device has been deleted (sc=%p)\n",
1711 ioc->name, SCpnt));
1712 SCpnt->result = DID_NO_CONNECT << 16;
1713 SCpnt->scsi_done(SCpnt);
1714 retval = SUCCESS;
1715 goto out;
1716 }
1717
1718 /* Task aborts are not supported for hidden raid components.
1719 */
1720 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1721 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1722 "task abort: hidden raid component (sc=%p)\n",
1723 ioc->name, SCpnt));
1724 SCpnt->result = DID_RESET << 16;
1725 retval = FAILED;
1726 goto out;
1727 }
1728
1729 /* Task aborts are not supported for volumes.
1730 */
1731 if (vdevice->vtarget->raidVolume) {
1732 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1733 "task abort: raid volume (sc=%p)\n",
1734 ioc->name, SCpnt));
1735 SCpnt->result = DID_RESET << 16;
1736 retval = FAILED;
1737 goto out;
1738 }
1739
1740 /* Find this command
1741 */
1742 if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) {
1743 /* Cmd not found in ScsiLookup.
1744 * Do OS callback.
1745 */
1746 SCpnt->result = DID_RESET << 16;
1747 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
1748 "Command not in the active list! (sc=%p)\n", ioc->name,
1749 SCpnt));
1750 retval = SUCCESS;
1751 goto out;
1752 }
1753
1754 if (ioc->timeouts < -1)
1755 ioc->timeouts++;
1756
1757 if (mpt_fwfault_debug)
1758 mpt_halt_firmware(ioc);
1759
1760 /* Most important! Set TaskMsgContext to SCpnt's MsgContext!
1761 * (the IO to be ABORT'd)
1762 *
1763 * NOTE: Since we do not byteswap MsgContext, we do not
1764 * swap it here either. It is an opaque cookie to
1765 * the controller, so it does not matter. -DaveM
1766 */
1767 mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx);
1768 ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;
1769 retval = mptscsih_IssueTaskMgmt(hd,
1770 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
1771 vdevice->vtarget->channel,
1772 vdevice->vtarget->id, vdevice->lun,
1773 ctx2abort, mptscsih_get_tm_timeout(ioc));
1774
1775 if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) {
1776 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1777 "task abort: command still in active list! (sc=%p)\n",
1778 ioc->name, SCpnt));
1779 retval = FAILED;
1780 } else {
1781 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1782 "task abort: command cleared from active list! (sc=%p)\n",
1783 ioc->name, SCpnt));
1784 retval = SUCCESS;
1785 }
1786
1787 out:
1788 printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
1789 ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
1790 SCpnt);
1791
1792 return retval;
1793 }
1794
1795 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1796 /**
1797 * mptscsih_dev_reset - Perform a SCSI TARGET_RESET! new_eh variant
1798 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1799 *
1800 * (linux scsi_host_template.eh_dev_reset_handler routine)
1801 *
1802 * Returns SUCCESS or FAILED.
1803 **/
1804 int
1805 mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
1806 {
1807 MPT_SCSI_HOST *hd;
1808 int retval;
1809 VirtDevice *vdevice;
1810 MPT_ADAPTER *ioc;
1811
1812 /* If we can't locate our host adapter structure, return FAILED status.
1813 */
1814 if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1815 printk(KERN_ERR MYNAM ": target reset: "
1816 "Can't locate host! (sc=%p)\n", SCpnt);
1817 return FAILED;
1818 }
1819
1820 ioc = hd->ioc;
1821 printk(MYIOC_s_INFO_FMT "attempting target reset! (sc=%p)\n",
1822 ioc->name, SCpnt);
1823 scsi_print_command(SCpnt);
1824
1825 vdevice = SCpnt->device->hostdata;
1826 if (!vdevice || !vdevice->vtarget) {
1827 retval = 0;
1828 goto out;
1829 }
1830
1831 /* Target reset to hidden raid component is not supported
1832 */
1833 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1834 retval = FAILED;
1835 goto out;
1836 }
1837
1838 retval = mptscsih_IssueTaskMgmt(hd,
1839 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
1840 vdevice->vtarget->channel,
1841 vdevice->vtarget->id, 0, 0,
1842 mptscsih_get_tm_timeout(ioc));
1843
1844 out:
1845 printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
1846 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1847
1848 if (retval == 0)
1849 return SUCCESS;
1850 else
1851 return FAILED;
1852 }
1853
1854
1855 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1856 /**
1857 * mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant
1858 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1859 *
1860 * (linux scsi_host_template.eh_bus_reset_handler routine)
1861 *
1862 * Returns SUCCESS or FAILED.
1863 **/
1864 int
1865 mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
1866 {
1867 MPT_SCSI_HOST *hd;
1868 int retval;
1869 VirtDevice *vdevice;
1870 MPT_ADAPTER *ioc;
1871
1872 /* If we can't locate our host adapter structure, return FAILED status.
1873 */
1874 if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1875 printk(KERN_ERR MYNAM ": bus reset: "
1876 "Can't locate host! (sc=%p)\n", SCpnt);
1877 return FAILED;
1878 }
1879
1880 ioc = hd->ioc;
1881 printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n",
1882 ioc->name, SCpnt);
1883 scsi_print_command(SCpnt);
1884
1885 if (ioc->timeouts < -1)
1886 ioc->timeouts++;
1887
1888 vdevice = SCpnt->device->hostdata;
1889 if (!vdevice || !vdevice->vtarget)
1890 return SUCCESS;
1891 retval = mptscsih_IssueTaskMgmt(hd,
1892 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
1893 vdevice->vtarget->channel, 0, 0, 0,
1894 mptscsih_get_tm_timeout(ioc));
1895
1896 printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
1897 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1898
1899 if (retval == 0)
1900 return SUCCESS;
1901 else
1902 return FAILED;
1903 }
1904
1905 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1906 /**
1907 * mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
1908 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1909 *
1910 * (linux scsi_host_template.eh_host_reset_handler routine)
1911 *
1912 * Returns SUCCESS or FAILED.
1913 */
1914 int
1915 mptscsih_host_reset(struct scsi_cmnd *SCpnt)
1916 {
1917 MPT_SCSI_HOST * hd;
1918 int status = SUCCESS;
1919 MPT_ADAPTER *ioc;
1920 int retval;
1921
1922 /* If we can't locate the host to reset, then we failed. */
1923 if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1924 printk(KERN_ERR MYNAM ": host reset: "
1925 "Can't locate host! (sc=%p)\n", SCpnt);
1926 return FAILED;
1927 }
1928
1929 /* make sure we have no outstanding commands at this stage */
1930 mptscsih_flush_running_cmds(hd);
1931
1932 ioc = hd->ioc;
1933 printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
1934 ioc->name, SCpnt);
1935
1936 /* If our attempts to reset the host failed, then return a failed
1937 * status. The host will be taken off line by the SCSI mid-layer.
1938 */
1939 retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1940 if (retval < 0)
1941 status = FAILED;
1942 else
1943 status = SUCCESS;
1944
1945 printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
1946 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1947
1948 return status;
1949 }
1950
1951 static int
1952 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
1953 SCSITaskMgmtReply_t *pScsiTmReply)
1954 {
1955 u16 iocstatus;
1956 u32 termination_count;
1957 int retval;
1958
1959 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
1960 retval = FAILED;
1961 goto out;
1962 }
1963
1964 DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
1965
1966 iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
1967 termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
1968
1969 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1970 "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
1971 "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
1972 "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
1973 pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
1974 le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
1975 termination_count));
1976
1977 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
1978 pScsiTmReply->ResponseCode)
1979 mptscsih_taskmgmt_response_code(ioc,
1980 pScsiTmReply->ResponseCode);
1981
1982 if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
1983 retval = 0;
1984 goto out;
1985 }
1986
1987 retval = FAILED;
1988 if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
1989 if (termination_count == 1)
1990 retval = 0;
1991 goto out;
1992 }
1993
1994 if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
1995 iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
1996 retval = 0;
1997
1998 out:
1999 return retval;
2000 }
2001
2002 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2003 void
2004 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
2005 {
2006 char *desc;
2007
2008 switch (response_code) {
2009 case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
2010 desc = "The task completed.";
2011 break;
2012 case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
2013 desc = "The IOC received an invalid frame status.";
2014 break;
2015 case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
2016 desc = "The task type is not supported.";
2017 break;
2018 case MPI_SCSITASKMGMT_RSP_TM_FAILED:
2019 desc = "The requested task failed.";
2020 break;
2021 case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
2022 desc = "The task completed successfully.";
2023 break;
2024 case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
2025 desc = "The LUN request is invalid.";
2026 break;
2027 case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
2028 desc = "The task is in the IOC queue and has not been sent to target.";
2029 break;
2030 default:
2031 desc = "unknown";
2032 break;
2033 }
2034 printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
2035 ioc->name, response_code, desc);
2036 }
2037 EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
2038
2039 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2040 /**
2041 * mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
2042 * @ioc: Pointer to MPT_ADAPTER structure
2043 * @mf: Pointer to SCSI task mgmt request frame
2044 * @mr: Pointer to SCSI task mgmt reply frame
2045 *
2046 * This routine is called from mptbase.c::mpt_interrupt() at the completion
2047 * of any SCSI task management request.
2048 * This routine is registered with the MPT (base) driver at driver
2049 * load/init time via the mpt_register() API call.
2050 *
2051 * Returns 1 indicating alloc'd request frame ptr should be freed.
2052 **/
2053 int
2054 mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
2055 MPT_FRAME_HDR *mr)
2056 {
2057 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2058 "TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
2059
2060 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2061
2062 if (!mr)
2063 goto out;
2064
2065 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2066 memcpy(ioc->taskmgmt_cmds.reply, mr,
2067 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
2068 out:
2069 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
2070 mpt_clear_taskmgmt_in_progress_flag(ioc);
2071 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2072 complete(&ioc->taskmgmt_cmds.done);
2073 if (ioc->bus_type == SAS)
2074 ioc->schedule_target_reset(ioc);
2075 return 1;
2076 }
2077 return 0;
2078 }
2079
2080 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2081 /*
2082 * This is anyones guess quite frankly.
2083 */
2084 int
2085 mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
2086 sector_t capacity, int geom[])
2087 {
2088 int heads;
2089 int sectors;
2090 sector_t cylinders;
2091 ulong dummy;
2092
2093 heads = 64;
2094 sectors = 32;
2095
2096 dummy = heads * sectors;
2097 cylinders = capacity;
2098 sector_div(cylinders,dummy);
2099
2100 /*
2101 * Handle extended translation size for logical drives
2102 * > 1Gb
2103 */
2104 if ((ulong)capacity >= 0x200000) {
2105 heads = 255;
2106 sectors = 63;
2107 dummy = heads * sectors;
2108 cylinders = capacity;
2109 sector_div(cylinders,dummy);
2110 }
2111
2112 /* return result */
2113 geom[0] = heads;
2114 geom[1] = sectors;
2115 geom[2] = cylinders;
2116
2117 return 0;
2118 }
2119
2120 /* Search IOC page 3 to determine if this is hidden physical disk
2121 *
2122 */
2123 int
2124 mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
2125 {
2126 struct inactive_raid_component_info *component_info;
2127 int i, j;
2128 RaidPhysDiskPage1_t *phys_disk;
2129 int rc = 0;
2130 int num_paths;
2131
2132 if (!ioc->raid_data.pIocPg3)
2133 goto out;
2134 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2135 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2136 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2137 rc = 1;
2138 goto out;
2139 }
2140 }
2141
2142 if (ioc->bus_type != SAS)
2143 goto out;
2144
2145 /*
2146 * Check if dual path
2147 */
2148 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2149 num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2150 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2151 if (num_paths < 2)
2152 continue;
2153 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2154 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2155 if (!phys_disk)
2156 continue;
2157 if ((mpt_raid_phys_disk_pg1(ioc,
2158 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2159 phys_disk))) {
2160 kfree(phys_disk);
2161 continue;
2162 }
2163 for (j = 0; j < num_paths; j++) {
2164 if ((phys_disk->Path[j].Flags &
2165 MPI_RAID_PHYSDISK1_FLAG_INVALID))
2166 continue;
2167 if ((phys_disk->Path[j].Flags &
2168 MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2169 continue;
2170 if ((id == phys_disk->Path[j].PhysDiskID) &&
2171 (channel == phys_disk->Path[j].PhysDiskBus)) {
2172 rc = 1;
2173 kfree(phys_disk);
2174 goto out;
2175 }
2176 }
2177 kfree(phys_disk);
2178 }
2179
2180
2181 /*
2182 * Check inactive list for matching phys disks
2183 */
2184 if (list_empty(&ioc->raid_data.inactive_list))
2185 goto out;
2186
2187 mutex_lock(&ioc->raid_data.inactive_list_mutex);
2188 list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2189 list) {
2190 if ((component_info->d.PhysDiskID == id) &&
2191 (component_info->d.PhysDiskBus == channel))
2192 rc = 1;
2193 }
2194 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2195
2196 out:
2197 return rc;
2198 }
2199 EXPORT_SYMBOL(mptscsih_is_phys_disk);
2200
2201 u8
2202 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
2203 {
2204 struct inactive_raid_component_info *component_info;
2205 int i, j;
2206 RaidPhysDiskPage1_t *phys_disk;
2207 int rc = -ENXIO;
2208 int num_paths;
2209
2210 if (!ioc->raid_data.pIocPg3)
2211 goto out;
2212 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2213 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2214 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2215 rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
2216 goto out;
2217 }
2218 }
2219
2220 if (ioc->bus_type != SAS)
2221 goto out;
2222
2223 /*
2224 * Check if dual path
2225 */
2226 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2227 num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2228 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2229 if (num_paths < 2)
2230 continue;
2231 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2232 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2233 if (!phys_disk)
2234 continue;
2235 if ((mpt_raid_phys_disk_pg1(ioc,
2236 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2237 phys_disk))) {
2238 kfree(phys_disk);
2239 continue;
2240 }
2241 for (j = 0; j < num_paths; j++) {
2242 if ((phys_disk->Path[j].Flags &
2243 MPI_RAID_PHYSDISK1_FLAG_INVALID))
2244 continue;
2245 if ((phys_disk->Path[j].Flags &
2246 MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2247 continue;
2248 if ((id == phys_disk->Path[j].PhysDiskID) &&
2249 (channel == phys_disk->Path[j].PhysDiskBus)) {
2250 rc = phys_disk->PhysDiskNum;
2251 kfree(phys_disk);
2252 goto out;
2253 }
2254 }
2255 kfree(phys_disk);
2256 }
2257
2258 /*
2259 * Check inactive list for matching phys disks
2260 */
2261 if (list_empty(&ioc->raid_data.inactive_list))
2262 goto out;
2263
2264 mutex_lock(&ioc->raid_data.inactive_list_mutex);
2265 list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2266 list) {
2267 if ((component_info->d.PhysDiskID == id) &&
2268 (component_info->d.PhysDiskBus == channel))
2269 rc = component_info->d.PhysDiskNum;
2270 }
2271 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2272
2273 out:
2274 return rc;
2275 }
2276 EXPORT_SYMBOL(mptscsih_raid_id_to_num);
2277
2278 /*
2279 * OS entry point to allow for host driver to free allocated memory
2280 * Called if no device present or device being unloaded
2281 */
2282 void
2283 mptscsih_slave_destroy(struct scsi_device *sdev)
2284 {
2285 struct Scsi_Host *host = sdev->host;
2286 MPT_SCSI_HOST *hd = shost_priv(host);
2287 VirtTarget *vtarget;
2288 VirtDevice *vdevice;
2289 struct scsi_target *starget;
2290
2291 starget = scsi_target(sdev);
2292 vtarget = starget->hostdata;
2293 vdevice = sdev->hostdata;
2294 if (!vdevice)
2295 return;
2296
2297 mptscsih_search_running_cmds(hd, vdevice);
2298 vtarget->num_luns--;
2299 mptscsih_synchronize_cache(hd, vdevice);
2300 kfree(vdevice);
2301 sdev->hostdata = NULL;
2302 }
2303
2304 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2305 /*
2306 * mptscsih_change_queue_depth - This function will set a devices queue depth
2307 * @sdev: per scsi_device pointer
2308 * @qdepth: requested queue depth
2309 *
2310 * Adding support for new 'change_queue_depth' api.
2311 */
2312 int
2313 mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
2314 {
2315 MPT_SCSI_HOST *hd = shost_priv(sdev->host);
2316 VirtTarget *vtarget;
2317 struct scsi_target *starget;
2318 int max_depth;
2319 MPT_ADAPTER *ioc = hd->ioc;
2320
2321 starget = scsi_target(sdev);
2322 vtarget = starget->hostdata;
2323
2324 if (ioc->bus_type == SPI) {
2325 if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
2326 max_depth = 1;
2327 else if (sdev->type == TYPE_DISK &&
2328 vtarget->minSyncFactor <= MPT_ULTRA160)
2329 max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
2330 else
2331 max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
2332 } else
2333 max_depth = ioc->sh->can_queue;
2334
2335 if (!sdev->tagged_supported)
2336 max_depth = 1;
2337
2338 if (qdepth > max_depth)
2339 qdepth = max_depth;
2340
2341 return scsi_change_queue_depth(sdev, qdepth);
2342 }
2343
2344 /*
2345 * OS entry point to adjust the queue_depths on a per-device basis.
2346 * Called once per device the bus scan. Use it to force the queue_depth
2347 * member to 1 if a device does not support Q tags.
2348 * Return non-zero if fails.
2349 */
2350 int
2351 mptscsih_slave_configure(struct scsi_device *sdev)
2352 {
2353 struct Scsi_Host *sh = sdev->host;
2354 VirtTarget *vtarget;
2355 VirtDevice *vdevice;
2356 struct scsi_target *starget;
2357 MPT_SCSI_HOST *hd = shost_priv(sh);
2358 MPT_ADAPTER *ioc = hd->ioc;
2359
2360 starget = scsi_target(sdev);
2361 vtarget = starget->hostdata;
2362 vdevice = sdev->hostdata;
2363
2364 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2365 "device @ %p, channel=%d, id=%d, lun=%llu\n",
2366 ioc->name, sdev, sdev->channel, sdev->id, sdev->lun));
2367 if (ioc->bus_type == SPI)
2368 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2369 "sdtr %d wdtr %d ppr %d inq length=%d\n",
2370 ioc->name, sdev->sdtr, sdev->wdtr,
2371 sdev->ppr, sdev->inquiry_len));
2372
2373 vdevice->configured_lun = 1;
2374
2375 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2376 "Queue depth=%d, tflags=%x\n",
2377 ioc->name, sdev->queue_depth, vtarget->tflags));
2378
2379 if (ioc->bus_type == SPI)
2380 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2381 "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n",
2382 ioc->name, vtarget->negoFlags, vtarget->maxOffset,
2383 vtarget->minSyncFactor));
2384
2385 mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
2386 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2387 "tagged %d, simple %d\n",
2388 ioc->name,sdev->tagged_supported, sdev->simple_tags));
2389
2390 blk_queue_dma_alignment (sdev->request_queue, 512 - 1);
2391
2392 return 0;
2393 }
2394
2395 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2396 /*
2397 * Private routines...
2398 */
2399
2400 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2401 /* Utility function to copy sense data from the scsi_cmnd buffer
2402 * to the FC and SCSI target structures.
2403 *
2404 */
2405 static void
2406 mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
2407 {
2408 VirtDevice *vdevice;
2409 SCSIIORequest_t *pReq;
2410 u32 sense_count = le32_to_cpu(pScsiReply->SenseCount);
2411 MPT_ADAPTER *ioc = hd->ioc;
2412
2413 /* Get target structure
2414 */
2415 pReq = (SCSIIORequest_t *) mf;
2416 vdevice = sc->device->hostdata;
2417
2418 if (sense_count) {
2419 u8 *sense_data;
2420 int req_index;
2421
2422 /* Copy the sense received into the scsi command block. */
2423 req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2424 sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
2425 memcpy(sc->sense_buffer, sense_data, SNS_LEN(sc));
2426
2427 /* Log SMART data (asc = 0x5D, non-IM case only) if required.
2428 */
2429 if ((ioc->events) && (ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
2430 if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) {
2431 int idx;
2432
2433 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
2434 ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
2435 ioc->events[idx].eventContext = ioc->eventContext;
2436
2437 ioc->events[idx].data[0] = (pReq->LUN[1] << 24) |
2438 (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) |
2439 (sc->device->channel << 8) | sc->device->id;
2440
2441 ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12];
2442
2443 ioc->eventContext++;
2444 if (ioc->pcidev->vendor ==
2445 PCI_VENDOR_ID_IBM) {
2446 mptscsih_issue_sep_command(ioc,
2447 vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
2448 vdevice->vtarget->tflags |=
2449 MPT_TARGET_FLAGS_LED_ON;
2450 }
2451 }
2452 }
2453 } else {
2454 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n",
2455 ioc->name));
2456 }
2457 }
2458
2459 /**
2460 * mptscsih_get_scsi_lookup - retrieves scmd entry
2461 * @ioc: Pointer to MPT_ADAPTER structure
2462 * @i: index into the array
2463 *
2464 * Returns the scsi_cmd pointer
2465 */
2466 struct scsi_cmnd *
2467 mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
2468 {
2469 unsigned long flags;
2470 struct scsi_cmnd *scmd;
2471
2472 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2473 scmd = ioc->ScsiLookup[i];
2474 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2475
2476 return scmd;
2477 }
2478 EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
2479
2480 /**
2481 * mptscsih_getclear_scsi_lookup - retrieves and clears scmd entry from ScsiLookup[] array list
2482 * @ioc: Pointer to MPT_ADAPTER structure
2483 * @i: index into the array
2484 *
2485 * Returns the scsi_cmd pointer
2486 *
2487 **/
2488 static struct scsi_cmnd *
2489 mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
2490 {
2491 unsigned long flags;
2492 struct scsi_cmnd *scmd;
2493
2494 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2495 scmd = ioc->ScsiLookup[i];
2496 ioc->ScsiLookup[i] = NULL;
2497 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2498
2499 return scmd;
2500 }
2501
2502 /**
2503 * mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list
2504 *
2505 * @ioc: Pointer to MPT_ADAPTER structure
2506 * @i: index into the array
2507 * @scmd: scsi_cmnd pointer
2508 *
2509 **/
2510 static void
2511 mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd)
2512 {
2513 unsigned long flags;
2514
2515 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2516 ioc->ScsiLookup[i] = scmd;
2517 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2518 }
2519
2520 /**
2521 * SCPNT_TO_LOOKUP_IDX - searches for a given scmd in the ScsiLookup[] array list
2522 * @ioc: Pointer to MPT_ADAPTER structure
2523 * @sc: scsi_cmnd pointer
2524 */
2525 static int
2526 SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *sc)
2527 {
2528 unsigned long flags;
2529 int i, index=-1;
2530
2531 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2532 for (i = 0; i < ioc->req_depth; i++) {
2533 if (ioc->ScsiLookup[i] == sc) {
2534 index = i;
2535 goto out;
2536 }
2537 }
2538
2539 out:
2540 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2541 return index;
2542 }
2543
2544 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2545 int
2546 mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
2547 {
2548 MPT_SCSI_HOST *hd;
2549
2550 if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
2551 return 0;
2552
2553 hd = shost_priv(ioc->sh);
2554 switch (reset_phase) {
2555 case MPT_IOC_SETUP_RESET:
2556 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2557 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
2558 break;
2559 case MPT_IOC_PRE_RESET:
2560 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2561 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
2562 mptscsih_flush_running_cmds(hd);
2563 break;
2564 case MPT_IOC_POST_RESET:
2565 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2566 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
2567 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
2568 ioc->internal_cmds.status |=
2569 MPT_MGMT_STATUS_DID_IOCRESET;
2570 complete(&ioc->internal_cmds.done);
2571 }
2572 break;
2573 default:
2574 break;
2575 }
2576 return 1; /* currently means nothing really */
2577 }
2578
2579 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2580 int
2581 mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
2582 {
2583 u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
2584
2585 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2586 "MPT event (=%02Xh) routed to SCSI host driver!\n",
2587 ioc->name, event));
2588
2589 if ((event == MPI_EVENT_IOC_BUS_RESET ||
2590 event == MPI_EVENT_EXT_BUS_RESET) &&
2591 (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
2592 ioc->soft_resets++;
2593
2594 return 1; /* currently means nothing really */
2595 }
2596
2597 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2598 /*
2599 * Bus Scan and Domain Validation functionality ...
2600 */
2601
2602 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2603 /*
2604 * mptscsih_scandv_complete - Scan and DV callback routine registered
2605 * to Fustion MPT (base) driver.
2606 *
2607 * @ioc: Pointer to MPT_ADAPTER structure
2608 * @mf: Pointer to original MPT request frame
2609 * @mr: Pointer to MPT reply frame (NULL if TurboReply)
2610 *
2611 * This routine is called from mpt.c::mpt_interrupt() at the completion
2612 * of any SCSI IO request.
2613 * This routine is registered with the Fusion MPT (base) driver at driver
2614 * load/init time via the mpt_register() API call.
2615 *
2616 * Returns 1 indicating alloc'd request frame ptr should be freed.
2617 *
2618 * Remark: Sets a completion code and (possibly) saves sense data
2619 * in the IOC member localReply structure.
2620 * Used ONLY for DV and other internal commands.
2621 */
2622 int
2623 mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2624 MPT_FRAME_HDR *reply)
2625 {
2626 SCSIIORequest_t *pReq;
2627 SCSIIOReply_t *pReply;
2628 u8 cmd;
2629 u16 req_idx;
2630 u8 *sense_data;
2631 int sz;
2632
2633 ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2634 ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
2635 if (!reply)
2636 goto out;
2637
2638 pReply = (SCSIIOReply_t *) reply;
2639 pReq = (SCSIIORequest_t *) req;
2640 ioc->internal_cmds.completion_code =
2641 mptscsih_get_completion_code(ioc, req, reply);
2642 ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2643 memcpy(ioc->internal_cmds.reply, reply,
2644 min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
2645 cmd = reply->u.hdr.Function;
2646 if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
2647 (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
2648 (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
2649 req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
2650 sense_data = ((u8 *)ioc->sense_buf_pool +
2651 (req_idx * MPT_SENSE_BUFFER_ALLOC));
2652 sz = min_t(int, pReq->SenseBufferLength,
2653 MPT_SENSE_BUFFER_ALLOC);
2654 memcpy(ioc->internal_cmds.sense, sense_data, sz);
2655 }
2656 out:
2657 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
2658 return 0;
2659 ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2660 complete(&ioc->internal_cmds.done);
2661 return 1;
2662 }
2663
2664
2665 /**
2666 * mptscsih_get_completion_code - get completion code from MPT request
2667 * @ioc: Pointer to MPT_ADAPTER structure
2668 * @req: Pointer to original MPT request frame
2669 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
2670 *
2671 **/
2672 static int
2673 mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2674 MPT_FRAME_HDR *reply)
2675 {
2676 SCSIIOReply_t *pReply;
2677 MpiRaidActionReply_t *pr;
2678 u8 scsi_status;
2679 u16 status;
2680 int completion_code;
2681
2682 pReply = (SCSIIOReply_t *)reply;
2683 status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
2684 scsi_status = pReply->SCSIStatus;
2685
2686 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2687 "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
2688 "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
2689 scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
2690
2691 switch (status) {
2692
2693 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
2694 completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
2695 break;
2696
2697 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
2698 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
2699 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
2700 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
2701 completion_code = MPT_SCANDV_DID_RESET;
2702 break;
2703
2704 case MPI_IOCSTATUS_BUSY:
2705 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
2706 completion_code = MPT_SCANDV_BUSY;
2707 break;
2708
2709 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
2710 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
2711 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
2712 if (pReply->Function == MPI_FUNCTION_CONFIG) {
2713 completion_code = MPT_SCANDV_GOOD;
2714 } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
2715 pr = (MpiRaidActionReply_t *)reply;
2716 if (le16_to_cpu(pr->ActionStatus) ==
2717 MPI_RAID_ACTION_ASTATUS_SUCCESS)
2718 completion_code = MPT_SCANDV_GOOD;
2719 else
2720 completion_code = MPT_SCANDV_SOME_ERROR;
2721 } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
2722 completion_code = MPT_SCANDV_SENSE;
2723 else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
2724 if (req->u.scsireq.CDB[0] == INQUIRY)
2725 completion_code = MPT_SCANDV_ISSUE_SENSE;
2726 else
2727 completion_code = MPT_SCANDV_DID_RESET;
2728 } else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
2729 completion_code = MPT_SCANDV_DID_RESET;
2730 else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2731 completion_code = MPT_SCANDV_DID_RESET;
2732 else if (scsi_status == MPI_SCSI_STATUS_BUSY)
2733 completion_code = MPT_SCANDV_BUSY;
2734 else
2735 completion_code = MPT_SCANDV_GOOD;
2736 break;
2737
2738 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
2739 if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2740 completion_code = MPT_SCANDV_DID_RESET;
2741 else
2742 completion_code = MPT_SCANDV_SOME_ERROR;
2743 break;
2744 default:
2745 completion_code = MPT_SCANDV_SOME_ERROR;
2746 break;
2747
2748 } /* switch(status) */
2749
2750 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2751 " completionCode set to %08xh\n", ioc->name, completion_code));
2752 return completion_code;
2753 }
2754
2755 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2756 /**
2757 * mptscsih_do_cmd - Do internal command.
2758 * @hd: MPT_SCSI_HOST pointer
2759 * @io: INTERNAL_CMD pointer.
2760 *
2761 * Issue the specified internally generated command and do command
2762 * specific cleanup. For bus scan / DV only.
2763 * NOTES: If command is Inquiry and status is good,
2764 * initialize a target structure, save the data
2765 *
2766 * Remark: Single threaded access only.
2767 *
2768 * Return:
2769 * < 0 if an illegal command or no resources
2770 *
2771 * 0 if good
2772 *
2773 * > 0 if command complete but some type of completion error.
2774 */
2775 static int
2776 mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
2777 {
2778 MPT_FRAME_HDR *mf;
2779 SCSIIORequest_t *pScsiReq;
2780 int my_idx, ii, dir;
2781 int timeout;
2782 char cmdLen;
2783 char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
2784 u8 cmd = io->cmd;
2785 MPT_ADAPTER *ioc = hd->ioc;
2786 int ret = 0;
2787 unsigned long timeleft;
2788 unsigned long flags;
2789
2790 /* don't send internal command during diag reset */
2791 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2792 if (ioc->ioc_reset_in_progress) {
2793 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2794 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2795 "%s: busy with host reset\n", ioc->name, __func__));
2796 return MPT_SCANDV_BUSY;
2797 }
2798 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2799
2800 mutex_lock(&ioc->internal_cmds.mutex);
2801
2802 /* Set command specific information
2803 */
2804 switch (cmd) {
2805 case INQUIRY:
2806 cmdLen = 6;
2807 dir = MPI_SCSIIO_CONTROL_READ;
2808 CDB[0] = cmd;
2809 CDB[4] = io->size;
2810 timeout = 10;
2811 break;
2812
2813 case TEST_UNIT_READY:
2814 cmdLen = 6;
2815 dir = MPI_SCSIIO_CONTROL_READ;
2816 timeout = 10;
2817 break;
2818
2819 case START_STOP:
2820 cmdLen = 6;
2821 dir = MPI_SCSIIO_CONTROL_READ;
2822 CDB[0] = cmd;
2823 CDB[4] = 1; /*Spin up the disk */
2824 timeout = 15;
2825 break;
2826
2827 case REQUEST_SENSE:
2828 cmdLen = 6;
2829 CDB[0] = cmd;
2830 CDB[4] = io->size;
2831 dir = MPI_SCSIIO_CONTROL_READ;
2832 timeout = 10;
2833 break;
2834
2835 case READ_BUFFER:
2836 cmdLen = 10;
2837 dir = MPI_SCSIIO_CONTROL_READ;
2838 CDB[0] = cmd;
2839 if (io->flags & MPT_ICFLAG_ECHO) {
2840 CDB[1] = 0x0A;
2841 } else {
2842 CDB[1] = 0x02;
2843 }
2844
2845 if (io->flags & MPT_ICFLAG_BUF_CAP) {
2846 CDB[1] |= 0x01;
2847 }
2848 CDB[6] = (io->size >> 16) & 0xFF;
2849 CDB[7] = (io->size >> 8) & 0xFF;
2850 CDB[8] = io->size & 0xFF;
2851 timeout = 10;
2852 break;
2853
2854 case WRITE_BUFFER:
2855 cmdLen = 10;
2856 dir = MPI_SCSIIO_CONTROL_WRITE;
2857 CDB[0] = cmd;
2858 if (io->flags & MPT_ICFLAG_ECHO) {
2859 CDB[1] = 0x0A;
2860 } else {
2861 CDB[1] = 0x02;
2862 }
2863 CDB[6] = (io->size >> 16) & 0xFF;
2864 CDB[7] = (io->size >> 8) & 0xFF;
2865 CDB[8] = io->size & 0xFF;
2866 timeout = 10;
2867 break;
2868
2869 case RESERVE:
2870 cmdLen = 6;
2871 dir = MPI_SCSIIO_CONTROL_READ;
2872 CDB[0] = cmd;
2873 timeout = 10;
2874 break;
2875
2876 case RELEASE:
2877 cmdLen = 6;
2878 dir = MPI_SCSIIO_CONTROL_READ;
2879 CDB[0] = cmd;
2880 timeout = 10;
2881 break;
2882
2883 case SYNCHRONIZE_CACHE:
2884 cmdLen = 10;
2885 dir = MPI_SCSIIO_CONTROL_READ;
2886 CDB[0] = cmd;
2887 // CDB[1] = 0x02; /* set immediate bit */
2888 timeout = 10;
2889 break;
2890
2891 default:
2892 /* Error Case */
2893 ret = -EFAULT;
2894 goto out;
2895 }
2896
2897 /* Get and Populate a free Frame
2898 * MsgContext set in mpt_get_msg_frame call
2899 */
2900 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
2901 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
2902 ioc->name, __func__));
2903 ret = MPT_SCANDV_BUSY;
2904 goto out;
2905 }
2906
2907 pScsiReq = (SCSIIORequest_t *) mf;
2908
2909 /* Get the request index */
2910 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2911 ADD_INDEX_LOG(my_idx); /* for debug */
2912
2913 if (io->flags & MPT_ICFLAG_PHYS_DISK) {
2914 pScsiReq->TargetID = io->physDiskNum;
2915 pScsiReq->Bus = 0;
2916 pScsiReq->ChainOffset = 0;
2917 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
2918 } else {
2919 pScsiReq->TargetID = io->id;
2920 pScsiReq->Bus = io->channel;
2921 pScsiReq->ChainOffset = 0;
2922 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
2923 }
2924
2925 pScsiReq->CDBLength = cmdLen;
2926 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
2927
2928 pScsiReq->Reserved = 0;
2929
2930 pScsiReq->MsgFlags = mpt_msg_flags(ioc);
2931 /* MsgContext set in mpt_get_msg_fram call */
2932
2933 int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
2934
2935 if (io->flags & MPT_ICFLAG_TAGGED_CMD)
2936 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
2937 else
2938 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2939
2940 if (cmd == REQUEST_SENSE) {
2941 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2942 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2943 "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
2944 }
2945
2946 for (ii = 0; ii < 16; ii++)
2947 pScsiReq->CDB[ii] = CDB[ii];
2948
2949 pScsiReq->DataLength = cpu_to_le32(io->size);
2950 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
2951 + (my_idx * MPT_SENSE_BUFFER_ALLOC));
2952
2953 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2954 "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%llu\n",
2955 ioc->name, __func__, cmd, io->channel, io->id, io->lun));
2956
2957 if (dir == MPI_SCSIIO_CONTROL_READ)
2958 ioc->add_sge((char *) &pScsiReq->SGL,
2959 MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
2960 else
2961 ioc->add_sge((char *) &pScsiReq->SGL,
2962 MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
2963
2964 INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
2965 mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
2966 timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
2967 timeout*HZ);
2968 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
2969 ret = MPT_SCANDV_DID_RESET;
2970 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2971 "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
2972 cmd));
2973 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
2974 mpt_free_msg_frame(ioc, mf);
2975 goto out;
2976 }
2977 if (!timeleft) {
2978 printk(MYIOC_s_WARN_FMT
2979 "Issuing Reset from %s!! doorbell=0x%08xh"
2980 " cmd=0x%02x\n",
2981 ioc->name, __func__, mpt_GetIocState(ioc, 0),
2982 cmd);
2983 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
2984 mpt_free_msg_frame(ioc, mf);
2985 }
2986 goto out;
2987 }
2988
2989 ret = ioc->internal_cmds.completion_code;
2990 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
2991 ioc->name, __func__, ret));
2992
2993 out:
2994 CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
2995 mutex_unlock(&ioc->internal_cmds.mutex);
2996 return ret;
2997 }
2998
2999 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3000 /**
3001 * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
3002 * @hd: Pointer to a SCSI HOST structure
3003 * @vdevice: virtual target device
3004 *
3005 * Uses the ISR, but with special processing.
3006 * MUST be single-threaded.
3007 *
3008 */
3009 static void
3010 mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
3011 {
3012 INTERNAL_CMD iocmd;
3013
3014 /* Ignore hidden raid components, this is handled when the command
3015 * is sent to the volume
3016 */
3017 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
3018 return;
3019
3020 if (vdevice->vtarget->type != TYPE_DISK || vdevice->vtarget->deleted ||
3021 !vdevice->configured_lun)
3022 return;
3023
3024 /* Following parameters will not change
3025 * in this routine.
3026 */
3027 iocmd.cmd = SYNCHRONIZE_CACHE;
3028 iocmd.flags = 0;
3029 iocmd.physDiskNum = -1;
3030 iocmd.data = NULL;
3031 iocmd.data_dma = -1;
3032 iocmd.size = 0;
3033 iocmd.rsvd = iocmd.rsvd2 = 0;
3034 iocmd.channel = vdevice->vtarget->channel;
3035 iocmd.id = vdevice->vtarget->id;
3036 iocmd.lun = vdevice->lun;
3037
3038 mptscsih_do_cmd(hd, &iocmd);
3039 }
3040
3041 static ssize_t
3042 mptscsih_version_fw_show(struct device *dev, struct device_attribute *attr,
3043 char *buf)
3044 {
3045 struct Scsi_Host *host = class_to_shost(dev);
3046 MPT_SCSI_HOST *hd = shost_priv(host);
3047 MPT_ADAPTER *ioc = hd->ioc;
3048
3049 return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
3050 (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
3051 (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
3052 (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
3053 ioc->facts.FWVersion.Word & 0x000000FF);
3054 }
3055 static DEVICE_ATTR(version_fw, S_IRUGO, mptscsih_version_fw_show, NULL);
3056
3057 static ssize_t
3058 mptscsih_version_bios_show(struct device *dev, struct device_attribute *attr,
3059 char *buf)
3060 {
3061 struct Scsi_Host *host = class_to_shost(dev);
3062 MPT_SCSI_HOST *hd = shost_priv(host);
3063 MPT_ADAPTER *ioc = hd->ioc;
3064
3065 return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
3066 (ioc->biosVersion & 0xFF000000) >> 24,
3067 (ioc->biosVersion & 0x00FF0000) >> 16,
3068 (ioc->biosVersion & 0x0000FF00) >> 8,
3069 ioc->biosVersion & 0x000000FF);
3070 }
3071 static DEVICE_ATTR(version_bios, S_IRUGO, mptscsih_version_bios_show, NULL);
3072
3073 static ssize_t
3074 mptscsih_version_mpi_show(struct device *dev, struct device_attribute *attr,
3075 char *buf)
3076 {
3077 struct Scsi_Host *host = class_to_shost(dev);
3078 MPT_SCSI_HOST *hd = shost_priv(host);
3079 MPT_ADAPTER *ioc = hd->ioc;
3080
3081 return snprintf(buf, PAGE_SIZE, "%03x\n", ioc->facts.MsgVersion);
3082 }
3083 static DEVICE_ATTR(version_mpi, S_IRUGO, mptscsih_version_mpi_show, NULL);
3084
3085 static ssize_t
3086 mptscsih_version_product_show(struct device *dev,
3087 struct device_attribute *attr,
3088 char *buf)
3089 {
3090 struct Scsi_Host *host = class_to_shost(dev);
3091 MPT_SCSI_HOST *hd = shost_priv(host);
3092 MPT_ADAPTER *ioc = hd->ioc;
3093
3094 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->prod_name);
3095 }
3096 static DEVICE_ATTR(version_product, S_IRUGO,
3097 mptscsih_version_product_show, NULL);
3098
3099 static ssize_t
3100 mptscsih_version_nvdata_persistent_show(struct device *dev,
3101 struct device_attribute *attr,
3102 char *buf)
3103 {
3104 struct Scsi_Host *host = class_to_shost(dev);
3105 MPT_SCSI_HOST *hd = shost_priv(host);
3106 MPT_ADAPTER *ioc = hd->ioc;
3107
3108 return snprintf(buf, PAGE_SIZE, "%02xh\n",
3109 ioc->nvdata_version_persistent);
3110 }
3111 static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
3112 mptscsih_version_nvdata_persistent_show, NULL);
3113
3114 static ssize_t
3115 mptscsih_version_nvdata_default_show(struct device *dev,
3116 struct device_attribute *attr, char *buf)
3117 {
3118 struct Scsi_Host *host = class_to_shost(dev);
3119 MPT_SCSI_HOST *hd = shost_priv(host);
3120 MPT_ADAPTER *ioc = hd->ioc;
3121
3122 return snprintf(buf, PAGE_SIZE, "%02xh\n",ioc->nvdata_version_default);
3123 }
3124 static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
3125 mptscsih_version_nvdata_default_show, NULL);
3126
3127 static ssize_t
3128 mptscsih_board_name_show(struct device *dev, struct device_attribute *attr,
3129 char *buf)
3130 {
3131 struct Scsi_Host *host = class_to_shost(dev);
3132 MPT_SCSI_HOST *hd = shost_priv(host);
3133 MPT_ADAPTER *ioc = hd->ioc;
3134
3135 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_name);
3136 }
3137 static DEVICE_ATTR(board_name, S_IRUGO, mptscsih_board_name_show, NULL);
3138
3139 static ssize_t
3140 mptscsih_board_assembly_show(struct device *dev,
3141 struct device_attribute *attr, char *buf)
3142 {
3143 struct Scsi_Host *host = class_to_shost(dev);
3144 MPT_SCSI_HOST *hd = shost_priv(host);
3145 MPT_ADAPTER *ioc = hd->ioc;
3146
3147 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_assembly);
3148 }
3149 static DEVICE_ATTR(board_assembly, S_IRUGO,
3150 mptscsih_board_assembly_show, NULL);
3151
3152 static ssize_t
3153 mptscsih_board_tracer_show(struct device *dev, struct device_attribute *attr,
3154 char *buf)
3155 {
3156 struct Scsi_Host *host = class_to_shost(dev);
3157 MPT_SCSI_HOST *hd = shost_priv(host);
3158 MPT_ADAPTER *ioc = hd->ioc;
3159
3160 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_tracer);
3161 }
3162 static DEVICE_ATTR(board_tracer, S_IRUGO,
3163 mptscsih_board_tracer_show, NULL);
3164
3165 static ssize_t
3166 mptscsih_io_delay_show(struct device *dev, struct device_attribute *attr,
3167 char *buf)
3168 {
3169 struct Scsi_Host *host = class_to_shost(dev);
3170 MPT_SCSI_HOST *hd = shost_priv(host);
3171 MPT_ADAPTER *ioc = hd->ioc;
3172
3173 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
3174 }
3175 static DEVICE_ATTR(io_delay, S_IRUGO,
3176 mptscsih_io_delay_show, NULL);
3177
3178 static ssize_t
3179 mptscsih_device_delay_show(struct device *dev, struct device_attribute *attr,
3180 char *buf)
3181 {
3182 struct Scsi_Host *host = class_to_shost(dev);
3183 MPT_SCSI_HOST *hd = shost_priv(host);
3184 MPT_ADAPTER *ioc = hd->ioc;
3185
3186 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
3187 }
3188 static DEVICE_ATTR(device_delay, S_IRUGO,
3189 mptscsih_device_delay_show, NULL);
3190
3191 static ssize_t
3192 mptscsih_debug_level_show(struct device *dev, struct device_attribute *attr,
3193 char *buf)
3194 {
3195 struct Scsi_Host *host = class_to_shost(dev);
3196 MPT_SCSI_HOST *hd = shost_priv(host);
3197 MPT_ADAPTER *ioc = hd->ioc;
3198
3199 return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->debug_level);
3200 }
3201 static ssize_t
3202 mptscsih_debug_level_store(struct device *dev, struct device_attribute *attr,
3203 const char *buf, size_t count)
3204 {
3205 struct Scsi_Host *host = class_to_shost(dev);
3206 MPT_SCSI_HOST *hd = shost_priv(host);
3207 MPT_ADAPTER *ioc = hd->ioc;
3208 int val = 0;
3209
3210 if (sscanf(buf, "%x", &val) != 1)
3211 return -EINVAL;
3212
3213 ioc->debug_level = val;
3214 printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n",
3215 ioc->name, ioc->debug_level);
3216 return strlen(buf);
3217 }
3218 static DEVICE_ATTR(debug_level, S_IRUGO | S_IWUSR,
3219 mptscsih_debug_level_show, mptscsih_debug_level_store);
3220
3221 struct device_attribute *mptscsih_host_attrs[] = {
3222 &dev_attr_version_fw,
3223 &dev_attr_version_bios,
3224 &dev_attr_version_mpi,
3225 &dev_attr_version_product,
3226 &dev_attr_version_nvdata_persistent,
3227 &dev_attr_version_nvdata_default,
3228 &dev_attr_board_name,
3229 &dev_attr_board_assembly,
3230 &dev_attr_board_tracer,
3231 &dev_attr_io_delay,
3232 &dev_attr_device_delay,
3233 &dev_attr_debug_level,
3234 NULL,
3235 };
3236
3237 EXPORT_SYMBOL(mptscsih_host_attrs);
3238
3239 EXPORT_SYMBOL(mptscsih_remove);
3240 EXPORT_SYMBOL(mptscsih_shutdown);
3241 #ifdef CONFIG_PM
3242 EXPORT_SYMBOL(mptscsih_suspend);
3243 EXPORT_SYMBOL(mptscsih_resume);
3244 #endif
3245 EXPORT_SYMBOL(mptscsih_show_info);
3246 EXPORT_SYMBOL(mptscsih_info);
3247 EXPORT_SYMBOL(mptscsih_qcmd);
3248 EXPORT_SYMBOL(mptscsih_slave_destroy);
3249 EXPORT_SYMBOL(mptscsih_slave_configure);
3250 EXPORT_SYMBOL(mptscsih_abort);
3251 EXPORT_SYMBOL(mptscsih_dev_reset);
3252 EXPORT_SYMBOL(mptscsih_bus_reset);
3253 EXPORT_SYMBOL(mptscsih_host_reset);
3254 EXPORT_SYMBOL(mptscsih_bios_param);
3255 EXPORT_SYMBOL(mptscsih_io_done);
3256 EXPORT_SYMBOL(mptscsih_taskmgmt_complete);
3257 EXPORT_SYMBOL(mptscsih_scandv_complete);
3258 EXPORT_SYMBOL(mptscsih_event_process);
3259 EXPORT_SYMBOL(mptscsih_ioc_reset);
3260 EXPORT_SYMBOL(mptscsih_change_queue_depth);
3261
3262 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
Ubuntu Artful kernel mirror