2 # Multifunction miscellaneous devices
6 menu "Multifunction device drivers"
13 bool "Support Marvell 88PM8606/88PM8607"
14 depends on I2C=y && GENERIC_HARDIRQS
18 This supports for Marvell 88PM8606/88PM8607 Power Management IC.
19 This includes the I2C driver and the core APIs _only_, you have to
20 select individual components like voltage regulators, RTC and
21 battery-charger under the corresponding menus.
24 tristate "Support for Silicon Motion SM501"
26 This is the core driver for the Silicon Motion SM501 multimedia
27 companion chip. This device is a multifunction device which may
28 provide numerous interfaces including USB host controller, USB gadget,
29 asynchronous serial ports, audio functions, and a dual display video
30 interface. The device may be connected by PCI or local bus with
31 varying functions enabled.
34 bool "Export GPIO via GPIO layer"
35 depends on MFD_SM501 && GPIOLIB
37 This option uses the gpio library layer to export the 64 GPIO
38 lines on the SM501. The platform data is used to supply the
39 base number for the first GPIO line to register.
42 bool "Support for Compaq ASIC3"
43 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
46 This driver supports the ASIC3 multifunction chip found on many
47 PDAs (mainly iPAQ and HTC based ones)
49 config MFD_DAVINCI_VOICECODEC
53 config MFD_DM355EVM_MSP
54 bool "DaVinci DM355 EVM microcontroller"
55 depends on I2C=y && MACH_DAVINCI_DM355_EVM
57 This driver supports the MSP430 microcontroller used on these
58 boards. MSP430 firmware manages resets and power sequencing,
59 inputs from buttons and the IR remote, LEDs, an RTC, and more.
62 tristate "TI Sequencer Serial Port support"
63 depends on ARCH_DAVINCI_TNETV107X
66 Say Y here if you want support for the Sequencer Serial Port
67 in a Texas Instruments TNETV107X SoC.
69 To compile this driver as a module, choose M here: the
70 module will be called ti-ssp.
73 bool "HTC EGPIO support"
74 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
76 This driver supports the CPLD egpio chip present on
77 several HTC phones. It provides basic support for input
78 pins, output pins, and irqs.
81 tristate "HTC PASIC3 LED/DS1WM chip support"
84 This core driver provides register access for the LED/DS1WM
85 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
86 HTC Magician devices, respectively. Actual functionality is
87 handled by the leds-pasic3 and ds1wm drivers.
90 bool "HTC I2C PLD chip support"
91 depends on I2C=y && GPIOLIB
93 If you say yes here you get support for the supposed CPLD
94 found on omap850 HTC devices like the HTC Wizard and HTC Herald.
95 This device provides input and output GPIOs through an I2C
96 interface to one or more sub-chips.
99 tristate "Philips UCB1400 Core driver"
103 This enables support for the Philips UCB1400 core functions.
104 The UCB1400 is an AC97 audio codec.
106 To compile this driver as a module, choose M here: the
107 module will be called ucb1400_core.
110 tristate "LM3533 Lighting Power chip"
115 Say yes here to enable support for National Semiconductor / TI
116 LM3533 Lighting Power chips.
118 This driver provides common support for accessing the device;
119 additional drivers must be enabled in order to use the LED,
120 backlight or ambient-light-sensor functionality of the device.
123 tristate "TPS61050/61052 Boost Converters"
127 select REGULATOR_FIXED_VOLTAGE
129 This option enables a driver for the TP61050/TPS61052
130 high-power "white LED driver". This boost converter is
131 sometimes used for other things than white LEDs, and
132 also contains a GPIO pin.
135 tristate "TPS6501x Power Management chips"
136 depends on I2C && GPIOLIB
137 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
139 If you say yes here you get support for the TPS6501x series of
140 Power Management chips. These include voltage regulators,
141 lithium ion/polymer battery charging, and other features that
142 are often used in portable devices like cell phones and cameras.
144 This driver can also be built as a module. If so, the module
145 will be called tps65010.
148 tristate "TPS6507x Power Management / Touch Screen chips"
152 If you say yes here you get support for the TPS6507x series of
153 Power Management / Touch Screen chips. These include voltage
154 regulators, lithium ion/polymer battery charging, touch screen
155 and other features that are often used in portable devices.
156 This driver can also be built as a module. If so, the module
157 will be called tps6507x.
160 tristate "TPS65217 Power Management / White LED chips"
165 If you say yes here you get support for the TPS65217 series of
166 Power Management / White LED chips.
167 These include voltage regulators, lithium ion/polymer battery
168 charger, wled and other features that are often used in portable
171 This driver can also be built as a module. If so, the module
172 will be called tps65217.
175 bool "TPS6586x Power Management chips"
176 depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
180 If you say yes here you get support for the TPS6586X series of
181 Power Management chips.
182 This driver provides common support for accessing the device,
183 additional drivers must be enabled in order to use the
184 functionality of the device.
186 This driver can also be built as a module. If so, the module
187 will be called tps6586x.
190 bool "TPS65910 Power Management chip"
191 depends on I2C=y && GPIOLIB
196 if you say yes here you get support for the TPS65910 series of
197 Power Management chips.
203 config MFD_TPS65912_I2C
204 bool "TPS65912 Power Management chip with I2C"
207 depends on I2C=y && GPIOLIB
209 If you say yes here you get support for the TPS65912 series of
210 PM chips with I2C interface.
212 config MFD_TPS65912_SPI
213 bool "TPS65912 Power Management chip with SPI"
216 depends on SPI_MASTER && GPIOLIB
218 If you say yes here you get support for the TPS65912 series of
219 PM chips with SPI interface.
222 bool "Texas Instruments TWL92330/Menelaus PM chip"
223 depends on I2C=y && ARCH_OMAP2
225 If you say yes here you get support for the Texas Instruments
226 TWL92330/Menelaus Power Management chip. This include voltage
227 regulators, Dual slot memory card transceivers, real-time clock
228 and other features that are often used in portable devices like
229 cell phones and PDAs.
232 bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
233 depends on I2C=y && GENERIC_HARDIRQS
236 Say yes here if you have TWL4030 / TWL6030 family chip on your board.
237 This core driver provides register access and IRQ handling
238 facilities, and registers devices for the various functions
239 so that function-specific drivers can bind to them.
241 These multi-function chips are found on many OMAP2 and OMAP3
242 boards, providing power management, RTC, GPIO, keypad, a
243 high speed USB OTG transceiver, an audio codec (on most
244 versions) and many other features.
247 tristate "Texas Instruments TWL4030 MADC"
248 depends on TWL4030_CORE
250 This driver provides support for triton TWL4030-MADC. The
251 driver supports both RT and SW conversion methods.
253 This driver can be built as a module. If so it will be
257 bool "Support power resources on TWL4030 family chips"
258 depends on TWL4030_CORE && ARM
260 Say yes here if you want to use the power resources on the
261 TWL4030 family chips. Most of these resources are regulators,
262 which have a separate driver; some are control signals, such
263 as clock request handshaking.
265 This driver uses board-specific data to initialize the resources
266 and load scripts controlling which resources are switched off/on
267 or reset when a sleep, wakeup or warm reset event occurs.
269 config MFD_TWL4030_AUDIO
271 depends on TWL4030_CORE
276 tristate "TWL6030 PWM (Pulse Width Modulator) Support"
277 depends on TWL4030_CORE
281 Say yes here if you want support for TWL6030 PWM.
282 This is used to control charging LED brightness.
285 bool "Support for TWL6040 audio codec"
286 depends on I2C=y && GENERIC_HARDIRQS
291 Say yes here if you want support for Texas Instruments TWL6040 audio
293 This driver provides common support for accessing the device,
294 additional drivers must be enabled in order to use the
295 functionality of the device (audio, vibra).
298 bool "Support STMicroelectronics STMPE"
299 depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
302 Support for the STMPE family of I/O Expanders from
305 Currently supported devices are:
307 STMPE811: GPIO, Touchscreen
308 STMPE1601: GPIO, Keypad
309 STMPE2401: GPIO, Keypad
310 STMPE2403: GPIO, Keypad
312 This driver provides common support for accessing the device,
313 additional drivers must be enabled in order to use the functionality
314 of the device. Currently available sub drivers are:
318 Touchscreen: stmpe-ts
320 menu "STMPE Interface Drivers"
324 bool "STMPE I2C Inteface"
328 This is used to enable I2C interface of STMPE
331 bool "STMPE SPI Inteface"
332 depends on SPI_MASTER
334 This is used to enable SPI interface of STMPE
338 bool "Support Toshiba TC35892 and variants"
339 depends on I2C=y && GENERIC_HARDIRQS
342 Support for the Toshiba TC35892 and variants I/O Expander.
344 This driver provides common support for accessing the device,
345 additional drivers must be enabled in order to use the
346 functionality of the device.
353 bool "Support Toshiba T7L66XB"
354 depends on ARM && HAVE_CLK
358 Support for Toshiba Mobile IO Controller T7L66XB
361 bool "Support Toshiba TC6387XB"
362 depends on ARM && HAVE_CLK
366 Support for Toshiba Mobile IO Controller TC6387XB
369 bool "Support Toshiba TC6393XB"
370 depends on GPIOLIB && ARM && HAVE_CLK
374 Support for Toshiba Mobile IO Controller TC6393XB
377 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
380 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
381 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
382 usually found on PXA processors-based platforms. This includes
383 the I2C driver and the core APIs _only_, you have to select
384 individual components like LCD backlight, voltage regulators,
385 LEDs and battery-charger under the corresponding menus.
391 config MFD_DA9052_SPI
392 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
396 depends on SPI_MASTER=y
398 Support for the Dialog Semiconductor DA9052 PMIC
399 when controlled using SPI. This driver provides common support
400 for accessing the device, additional drivers must be enabled in
401 order to use the functionality of the device.
403 config MFD_DA9052_I2C
404 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
410 Support for the Dialog Semiconductor DA9052 PMIC
411 when controlled using I2C. This driver provides common support
412 for accessing the device, additional drivers must be enabled in
413 order to use the functionality of the device.
416 bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
419 Say yes here to add support for Analog Devices AD5520 and ADP5501,
420 Multifunction Power Management IC. This includes
421 the I2C driver and the core APIs _only_, you have to select
422 individual components like LCD backlight, LEDs, GPIOs and Kepad
423 under the corresponding menus.
426 bool "Maxim Semiconductor MAX77686 PMIC Support"
427 depends on I2C=y && GENERIC_HARDIRQS
432 Say yes here to support for Maxim Semiconductor MAX77686.
433 This is a Power Management IC with RTC on chip.
434 This driver provides common support for accessing the device;
435 additional drivers must be enabled in order to use the functionality
439 bool "Maxim Semiconductor MAX77693 PMIC Support"
440 depends on I2C=y && GENERIC_HARDIRQS
444 Say yes here to support for Maxim Semiconductor MAX77693.
445 This is a companion Power Management IC with Flash, Haptic, Charger,
446 and MUIC(Micro USB Interface Controller) controls on chip.
447 This driver provides common support for accessing the device;
448 additional drivers must be enabled in order to use the functionality
452 bool "Maxim Semiconductor MAX8925 PMIC Support"
453 depends on I2C=y && GENERIC_HARDIRQS
456 Say yes here to support for Maxim Semiconductor MAX8925. This is
457 a Power Management IC. This driver provides common support for
458 accessing the device, additional drivers must be enabled in order
459 to use the functionality of the device.
462 bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
463 depends on I2C=y && GENERIC_HARDIRQS
466 Say yes here to support for Maxim Semiconductor MAX8997/8966.
467 This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
468 MUIC controls on chip.
469 This driver provides common support for accessing the device;
470 additional drivers must be enabled in order to use the functionality
474 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
475 depends on I2C=y && GENERIC_HARDIRQS
478 Say yes here to support for Maxim Semiconductor MAX8998 and
479 National Semiconductor LP3974. This is a Power Management IC.
480 This driver provides common support for accessing the device,
481 additional drivers must be enabled in order to use the functionality
485 bool "SAMSUNG S5M Series Support"
486 depends on I2C=y && GENERIC_HARDIRQS
490 Support for the Samsung Electronics S5M MFD series.
491 This driver provides common support for accessing the device,
492 additional drivers must be enabled in order to use the functionality
496 bool "Support Wolfson Microelectronics WM8400"
501 Support for the Wolfson Microelecronics WM8400 PMIC and audio
502 CODEC. This driver provides common support for accessing
503 the device, additional drivers must be enabled in order to use
504 the functionality of the device.
508 depends on GENERIC_HARDIRQS
510 config MFD_WM831X_I2C
511 bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
516 depends on I2C=y && GENERIC_HARDIRQS
518 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
519 when controlled using I2C. This driver provides common support
520 for accessing the device, additional drivers must be enabled in
521 order to use the functionality of the device.
523 config MFD_WM831X_SPI
524 bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
529 depends on SPI_MASTER && GENERIC_HARDIRQS
531 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
532 when controlled using SPI. This driver provides common support
533 for accessing the device, additional drivers must be enabled in
534 order to use the functionality of the device.
538 depends on GENERIC_HARDIRQS
540 config MFD_WM8350_CONFIG_MODE_0
542 depends on MFD_WM8350
544 config MFD_WM8350_CONFIG_MODE_1
546 depends on MFD_WM8350
548 config MFD_WM8350_CONFIG_MODE_2
550 depends on MFD_WM8350
552 config MFD_WM8350_CONFIG_MODE_3
554 depends on MFD_WM8350
556 config MFD_WM8351_CONFIG_MODE_0
558 depends on MFD_WM8350
560 config MFD_WM8351_CONFIG_MODE_1
562 depends on MFD_WM8350
564 config MFD_WM8351_CONFIG_MODE_2
566 depends on MFD_WM8350
568 config MFD_WM8351_CONFIG_MODE_3
570 depends on MFD_WM8350
572 config MFD_WM8352_CONFIG_MODE_0
574 depends on MFD_WM8350
576 config MFD_WM8352_CONFIG_MODE_1
578 depends on MFD_WM8350
580 config MFD_WM8352_CONFIG_MODE_2
582 depends on MFD_WM8350
584 config MFD_WM8352_CONFIG_MODE_3
586 depends on MFD_WM8350
588 config MFD_WM8350_I2C
589 bool "Support Wolfson Microelectronics WM8350 with I2C"
591 depends on I2C=y && GENERIC_HARDIRQS
593 The WM8350 is an integrated audio and power management
594 subsystem with watchdog and RTC functionality for embedded
595 systems. This option enables core support for the WM8350 with
596 I2C as the control interface. Additional options must be
597 selected to enable support for the functionality of the chip.
600 bool "Support Wolfson Microelectronics WM8994"
604 depends on I2C=y && GENERIC_HARDIRQS
606 The WM8994 is a highly integrated hi-fi CODEC designed for
607 smartphone applicatiosn. As well as audio functionality it
608 has on board GPIO and regulator functionality which is
609 supported via the relevant subsystems. This driver provides
610 core support for the WM8994, in order to use the actual
611 functionaltiy of the device other drivers must be enabled.
614 tristate "Support for NXP PCF50633"
618 Say yes here if you have NXP PCF50633 chip on your board.
619 This core driver provides register access and IRQ handling
620 facilities, and registers devices for the various functions
621 so that function-specific drivers can bind to them.
624 tristate "Support for NXP PCF50633 ADC"
625 depends on MFD_PCF50633
627 Say yes here if you want to include support for ADC in the
631 tristate "Support for NXP PCF50633 GPIO"
632 depends on MFD_PCF50633
634 Say yes here if you want to include support GPIO for pins on
642 depends on SPI_MASTER || I2C
646 Enable support for the Freescale MC13783 and MC13892 PMICs.
647 This driver provides common support for accessing the device,
648 additional drivers must be enabled in order to use the
649 functionality of the device.
651 config MFD_MC13XXX_SPI
652 tristate "Freescale MC13783 and MC13892 SPI interface"
653 depends on SPI_MASTER
657 Select this if your MC13xxx is connected via an SPI bus.
659 config MFD_MC13XXX_I2C
660 tristate "Freescale MC13892 I2C interface"
665 Select this if your MC13xxx is connected via an I2C bus.
668 bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
669 default y if ARCH_U300 || ARCH_U8500
671 Say yes here if you have the ABX500 Mixed Signal IC family
672 chips. This core driver expose register access functions.
673 Functionality specific drivers using these functions can
674 remain unchanged when IC changes. Binding of the functions to
675 actual register access is done by the IC core driver.
678 bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
679 depends on I2C=y && ABX500_CORE
681 default y if ARCH_U300
683 Select this to enable the AB3100 Mixed Signal IC core
684 functionality. This connects to a AB3100 on the I2C bus
685 and expose a number of symbols needed for dependent devices
686 to read and write registers and subscribe to events from
687 this multi-functional IC. This is needed to use other features
688 of the AB3100 such as battery-backed RTC, charging control,
689 LEDs, vibrator, system power and temperature, power management
693 tristate "ST-Ericsson AB3100 OTP functions"
694 depends on AB3100_CORE
695 default y if AB3100_CORE
697 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
698 programmable memory) support. This exposes a sysfs file to read
703 depends on GENERIC_HARDIRQS && SPI_MASTER
705 This enables the PCAP ASIC present on EZX Phones. This is
706 needed for MMC, TouchScreen, Sound, USB, etc..
709 bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
710 depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
714 Select this option to enable access to AB8500 power management
715 chip. This connects to U8500 either on the SSP/SPI bus (deprecated
716 since hardware version v1.0) or the I2C bus via PRCMU. It also adds
717 the irq_chip parts for handling the Mixed Signal chip events.
718 This chip embeds various other multimedia funtionalities as well.
721 bool "Enable debug info via debugfs"
722 depends on AB8500_CORE && DEBUG_FS
723 default y if DEBUG_FS
725 Select this option if you want debug information using the debug
729 bool "AB8500 GPADC driver"
730 depends on AB8500_CORE && REGULATOR_AB8500
733 AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
735 config MFD_DB8500_PRCMU
736 bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
737 depends on UX500_SOC_DB8500
740 Select this option to enable support for the DB8500 Power Reset
741 and Control Management Unit. This is basically an autonomous
742 system controller running an XP70 microprocessor, which is accessed
743 through a register map.
746 tristate "Support for CS5535 and CS5536 southbridge core functions"
748 depends on PCI && X86
750 This is the core driver for CS5535/CS5536 MFD functions. This is
751 necessary for using the board's GPIO and MFGPT functionality.
753 config MFD_TIMBERDALE
754 tristate "Support for the Timberdale FPGA"
756 depends on PCI && GPIOLIB
758 This is the core driver for the timberdale FPGA. This device is a
759 multifunction device which exposes numerous platform devices.
761 The timberdale FPGA can be found on the Intel Atom development board
762 for in-vehicle infontainment, called Russellville.
765 tristate "Intel SCH LPC"
769 LPC bridge function of the Intel SCH provides support for
770 System Management Bus and General Purpose I/O.
773 tristate "Intel ICH LPC"
777 The LPC bridge function of the Intel ICH provides support for
778 many functional units. This driver provides needed support for
779 other drivers to control these functions, currently GPIO and
783 tristate "Support for RDC-R321x southbridge"
787 Say yes here if you want to have support for the RDC R-321x SoC
788 southbridge which provides access to GPIOs and Watchdog using the
789 southbridge PCI device configuration space.
791 config MFD_JANZ_CMODIO
792 tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
796 This is the core driver for the Janz CMOD-IO PCI MODULbus
797 carrier board. This device is a PCI to MODULbus bridge which may
798 host many different types of MODULbus daughterboards, including
799 CAN and GPIO controllers.
801 config MFD_JZ4740_ADC
802 bool "Support for the JZ4740 SoC ADC core"
804 select GENERIC_IRQ_CHIP
805 depends on MACH_JZ4740
807 Say yes here if you want support for the ADC unit in the JZ4740 SoC.
808 This driver is necessary for jz4740-battery and jz4740-hwmon driver.
811 tristate "Support for VIA VX855/VX875 integrated south bridge"
815 Say yes here to enable support for various functions of the
816 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
817 and/or vx855_gpio drivers for this to do anything useful.
819 config MFD_WL1273_CORE
820 tristate "Support for TI WL1273 FM radio."
825 This is the core driver for the TI WL1273 FM radio. This MFD
826 driver connects the radio-wl1273 V4L2 module and the wl1273
829 config MFD_OMAP_USB_HOST
830 bool "Support OMAP USBHS core driver"
831 depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
834 This is the core driver for the OAMP EHCI and OHCI drivers.
835 This MFD driver does the required setup functionalities for
836 OMAP USB Host drivers.
841 config MFD_PM8921_CORE
842 tristate "Qualcomm PM8921 PMIC chip"
847 If you say yes to this option, support will be included for the
848 built-in PM8921 PMIC chip.
850 This is required if your board has a PM8921 and uses its features,
851 such as: MPPs, GPIOs, regulators, interrupts, and PWM.
853 Say M here if you want to include support for PM8921 chip as a module.
854 This will build a module called "pm8921-core".
856 config MFD_PM8XXX_IRQ
857 bool "Support for Qualcomm PM8xxx IRQ features"
858 depends on MFD_PM8XXX
859 default y if MFD_PM8XXX
861 This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
863 This is required to use certain other PM 8xxx features, such as GPIO
866 config TPS65911_COMPARATOR
870 bool "TPS65090 Power Management chips"
871 depends on I2C=y && GENERIC_HARDIRQS
875 If you say yes here you get support for the TPS65090 series of
876 Power Management chips.
877 This driver provides common support for accessing the device,
878 additional drivers must be enabled in order to use the
879 functionality of the device.
881 config MFD_AAT2870_CORE
882 bool "Support for the AnalogicTech AAT2870"
884 depends on I2C=y && GPIOLIB
886 If you say yes here you get support for the AAT2870.
887 This driver provides common support for accessing the device,
888 additional drivers must be enabled in order to use the
889 functionality of the device.
891 config MFD_INTEL_MSIC
892 bool "Support for Intel MSIC"
893 depends on INTEL_SCU_IPC
896 Select this option to enable access to Intel MSIC (Avatele
897 Passage) chip. This chip embeds audio, battery, GPIO, etc.
898 devices used in Intel Medfield platforms.
901 bool "Ricoh RC5T583 Power Management system device"
902 depends on I2C=y && GENERIC_HARDIRQS
906 Select this option to get support for the RICOH583 Power
907 Management system device.
908 This driver provides common support for accessing the device
909 through i2c interface. The device supports multiple sub-devices
910 like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
911 Additional drivers must be enabled in order to use the
912 different functionality of the device.
915 bool "STA2X11 multi function device support"
920 bool "Support for Freescale i.MX on-chip ANATOP controller"
923 Select this option to enable Freescale i.MX on-chip ANATOP
924 MFD controller. This controller embeds regulator and
925 thermal devices for Freescale i.MX platforms.
928 bool "Support for the TI Palmas series chips"
934 If you say yes here you get support for the Palmas
935 series of PMIC chips from Texas Instruments.
940 menu "Multimedia Capabilities Port drivers"
941 depends on ARCH_SA1100
948 tristate "Support SA11x0 MCP interface"
949 depends on ARCH_SA1100
954 bool "Support for UCB1200 / UCB1300"
955 depends on MCP_SA11X0
958 config MCP_UCB1200_TS
959 tristate "Touchscreen interface support"
960 depends on MCP_UCB1200 && INPUT