drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 menu "Multifunction device drivers"
   6         depends on HAS_IOMEM
   7
   8 config MFD_CORE
   9         tristate
  10         default n
  11
  12 config MFD_88PM860X
  13         bool "Support Marvell 88PM8606/88PM8607"
  14         depends on I2C=y
  15         select MFD_CORE
  16         help
  17           This supports for Marvell 88PM8606/88PM8607 Power Management IC.
  18           This includes the I2C driver and the core APIs _only_, you have to
  19           select individual components like voltage regulators, RTC and
  20           battery-charger under the corresponding menus.
  21
  22 config MFD_SM501
  23         tristate "Support for Silicon Motion SM501"
  24          ---help---
  25           This is the core driver for the Silicon Motion SM501 multimedia
  26           companion chip. This device is a multifunction device which may
  27           provide numerous interfaces including USB host controller, USB gadget,
  28           asynchronous serial ports, audio functions, and a dual display video
  29           interface. The device may be connected by PCI or local bus with
  30           varying functions enabled.
  31
  32 config MFD_SM501_GPIO
  33         bool "Export GPIO via GPIO layer"
  34         depends on MFD_SM501 && GPIOLIB
  35          ---help---
  36          This option uses the gpio library layer to export the 64 GPIO
  37          lines on the SM501. The platform data is used to supply the
  38          base number for the first GPIO line to register.
  39
  40 config MFD_ASIC3
  41         bool "Support for Compaq ASIC3"
  42         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  43         select MFD_CORE
  44          ---help---
  45           This driver supports the ASIC3 multifunction chip found on many
  46           PDAs (mainly iPAQ and HTC based ones)
  47
  48 config MFD_SH_MOBILE_SDHI
  49         bool "Support for SuperH Mobile SDHI"
  50         depends on SUPERH
  51         select MFD_CORE
  52          ---help---
  53           This driver supports the SDHI hardware block found in many
  54           SuperH Mobile SoCs.
  55
  56 config MFD_DM355EVM_MSP
  57         bool "DaVinci DM355 EVM microcontroller"
  58         depends on I2C && MACH_DAVINCI_DM355_EVM
  59         help
  60           This driver supports the MSP430 microcontroller used on these
  61           boards.  MSP430 firmware manages resets and power sequencing,
  62           inputs from buttons and the IR remote, LEDs, an RTC, and more.
  63
  64 config HTC_EGPIO
  65         bool "HTC EGPIO support"
  66         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  67         help
  68             This driver supports the CPLD egpio chip present on
  69             several HTC phones.  It provides basic support for input
  70             pins, output pins, and irqs.
  71
  72 config HTC_PASIC3
  73         tristate "HTC PASIC3 LED/DS1WM chip support"
  74         select MFD_CORE
  75         help
  76           This core driver provides register access for the LED/DS1WM
  77           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  78           HTC Magician devices, respectively. Actual functionality is
  79           handled by the leds-pasic3 and ds1wm drivers.
  80
  81 config UCB1400_CORE
  82         tristate "Philips UCB1400 Core driver"
  83         depends on AC97_BUS
  84         depends on GPIOLIB
  85         help
  86           This enables support for the Philips UCB1400 core functions.
  87           The UCB1400 is an AC97 audio codec.
  88
  89           To compile this driver as a module, choose M here: the
  90           module will be called ucb1400_core.
  91
  92 config TPS65010
  93         tristate "TPS6501x Power Management chips"
  94         depends on I2C && GPIOLIB
  95         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
  96         help
  97           If you say yes here you get support for the TPS6501x series of
  98           Power Management chips.  These include voltage regulators,
  99           lithium ion/polymer battery charging, and other features that
 100           are often used in portable devices like cell phones and cameras.
 101
 102           This driver can also be built as a module.  If so, the module
 103           will be called tps65010.
 104
 105 config MENELAUS
 106         bool "Texas Instruments TWL92330/Menelaus PM chip"
 107         depends on I2C=y && ARCH_OMAP2
 108         help
 109           If you say yes here you get support for the Texas Instruments
 110           TWL92330/Menelaus Power Management chip. This include voltage
 111           regulators, Dual slot memory card transceivers, real-time clock
 112           and other features that are often used in portable devices like
 113           cell phones and PDAs.
 114
 115 config TWL4030_CORE
 116         bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
 117         depends on I2C=y && GENERIC_HARDIRQS
 118         help
 119           Say yes here if you have TWL4030 / TWL6030 family chip on your board.
 120           This core driver provides register access and IRQ handling
 121           facilities, and registers devices for the various functions
 122           so that function-specific drivers can bind to them.
 123
 124           These multi-function chips are found on many OMAP2 and OMAP3
 125           boards, providing power management, RTC, GPIO, keypad, a
 126           high speed USB OTG transceiver, an audio codec (on most
 127           versions) and many other features.
 128
 129 config TWL4030_POWER
 130         bool "Support power resources on TWL4030 family chips"
 131         depends on TWL4030_CORE && ARM
 132         help
 133           Say yes here if you want to use the power resources on the
 134           TWL4030 family chips.  Most of these resources are regulators,
 135           which have a separate driver; some are control signals, such
 136           as clock request handshaking.
 137
 138           This driver uses board-specific data to initialize the resources
 139           and load scripts controling which resources are switched off/on
 140           or reset when a sleep, wakeup or warm reset event occurs.
 141
 142 config TWL4030_CODEC
 143         bool
 144         depends on TWL4030_CORE
 145         select MFD_CORE
 146         default n
 147
 148 config MFD_TMIO
 149         bool
 150         default n
 151
 152 config MFD_T7L66XB
 153         bool "Support Toshiba T7L66XB"
 154         depends on ARM && HAVE_CLK
 155         select MFD_CORE
 156         select MFD_TMIO
 157         help
 158           Support for Toshiba Mobile IO Controller T7L66XB
 159
 160 config MFD_TC6387XB
 161         bool "Support Toshiba TC6387XB"
 162         depends on ARM && HAVE_CLK
 163         select MFD_CORE
 164         select MFD_TMIO
 165         help
 166           Support for Toshiba Mobile IO Controller TC6387XB
 167
 168 config MFD_TC6393XB
 169         bool "Support Toshiba TC6393XB"
 170         depends on GPIOLIB && ARM
 171         select MFD_CORE
 172         select MFD_TMIO
 173         help
 174           Support for Toshiba Mobile IO Controller TC6393XB
 175
 176 config PMIC_DA903X
 177         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 178         depends on I2C=y
 179         help
 180           Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
 181           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 182           usually found on PXA processors-based platforms. This includes
 183           the I2C driver and the core APIs _only_, you have to select
 184           individual components like LCD backlight, voltage regulators,
 185           LEDs and battery-charger under the corresponding menus.
 186
 187 config PMIC_ADP5520
 188         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
 189         depends on I2C=y
 190         help
 191           Say yes here to add support for Analog Devices AD5520 and ADP5501,
 192           Multifunction Power Management IC. This includes
 193           the I2C driver and the core APIs _only_, you have to select
 194           individual components like LCD backlight, LEDs, GPIOs and Kepad
 195           under the corresponding menus.
 196
 197 config MFD_MAX8925
 198         tristate "Maxim Semiconductor MAX8925 PMIC Support"
 199         depends on I2C
 200         help
 201           Say yes here to support for Maxim Semiconductor MAX8925. This is
 202           a Power Management IC. This driver provies common support for
 203           accessing the device, additional drivers must be enabled in order
 204           to use the functionality of the device.
 205
 206 config MFD_WM8400
 207         tristate "Support Wolfson Microelectronics WM8400"
 208         select MFD_CORE
 209         depends on I2C
 210         help
 211           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 212           CODEC.  This driver provides common support for accessing
 213           the device, additional drivers must be enabled in order to use
 214           the functionality of the device.
 215
 216 config MFD_WM831X
 217         bool "Support Wolfson Microelectronics WM831x/2x PMICs"
 218         select MFD_CORE
 219         depends on I2C=y
 220         help
 221           Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
 222           This driver provides common support for accessing the device,
 223           additional drivers must be enabled in order to use the
 224           functionality of the device.
 225
 226 config MFD_WM8350
 227         bool
 228
 229 config MFD_WM8350_CONFIG_MODE_0
 230         bool
 231         depends on MFD_WM8350
 232
 233 config MFD_WM8350_CONFIG_MODE_1
 234         bool
 235         depends on MFD_WM8350
 236
 237 config MFD_WM8350_CONFIG_MODE_2
 238         bool
 239         depends on MFD_WM8350
 240
 241 config MFD_WM8350_CONFIG_MODE_3
 242         bool
 243         depends on MFD_WM8350
 244
 245 config MFD_WM8351_CONFIG_MODE_0
 246         bool
 247         depends on MFD_WM8350
 248
 249 config MFD_WM8351_CONFIG_MODE_1
 250         bool
 251         depends on MFD_WM8350
 252
 253 config MFD_WM8351_CONFIG_MODE_2
 254         bool
 255         depends on MFD_WM8350
 256
 257 config MFD_WM8351_CONFIG_MODE_3
 258         bool
 259         depends on MFD_WM8350
 260
 261 config MFD_WM8352_CONFIG_MODE_0
 262         bool
 263         depends on MFD_WM8350
 264
 265 config MFD_WM8352_CONFIG_MODE_1
 266         bool
 267         depends on MFD_WM8350
 268
 269 config MFD_WM8352_CONFIG_MODE_2
 270         bool
 271         depends on MFD_WM8350
 272
 273 config MFD_WM8352_CONFIG_MODE_3
 274         bool
 275         depends on MFD_WM8350
 276
 277 config MFD_WM8350_I2C
 278         bool "Support Wolfson Microelectronics WM8350 with I2C"
 279         select MFD_WM8350
 280         depends on I2C=y
 281         help
 282           The WM8350 is an integrated audio and power management
 283           subsystem with watchdog and RTC functionality for embedded
 284           systems.  This option enables core support for the WM8350 with
 285           I2C as the control interface.  Additional options must be
 286           selected to enable support for the functionality of the chip.
 287
 288 config MFD_PCF50633
 289         tristate "Support for NXP PCF50633"
 290         depends on I2C
 291         help
 292           Say yes here if you have NXP PCF50633 chip on your board.
 293           This core driver provides register access and IRQ handling
 294           facilities, and registers devices for the various functions
 295           so that function-specific drivers can bind to them.
 296
 297 config MFD_MC13783
 298         tristate "Support Freescale MC13783"
 299         depends on SPI_MASTER
 300         select MFD_CORE
 301         help
 302           Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
 303           This driver provides common support for accessing  the device,
 304           additional drivers must be enabled in order to use the
 305           functionality of the device.
 306
 307 config PCF50633_ADC
 308         tristate "Support for NXP PCF50633 ADC"
 309         depends on MFD_PCF50633
 310         help
 311          Say yes here if you want to include support for ADC in the
 312          NXP PCF50633 chip.
 313
 314 config PCF50633_GPIO
 315         tristate "Support for NXP PCF50633 GPIO"
 316         depends on MFD_PCF50633
 317         help
 318          Say yes here if you want to include support GPIO for pins on
 319          the PCF50633 chip.
 320
 321 config AB3100_CORE
 322         tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 323         depends on I2C
 324         default y if ARCH_U300
 325         help
 326           Select this to enable the AB3100 Mixed Signal IC core
 327           functionality. This connects to a AB3100 on the I2C bus
 328           and expose a number of symbols needed for dependent devices
 329           to read and write registers and subscribe to events from
 330           this multi-functional IC. This is needed to use other features
 331           of the AB3100 such as battery-backed RTC, charging control,
 332           LEDs, vibrator, system power and temperature, power management
 333           and ALSA sound.
 334
 335 config AB3100_OTP
 336         tristate "ST-Ericsson AB3100 OTP functions"
 337         depends on AB3100_CORE
 338         default y if AB3100_CORE
 339         help
 340           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 341           programmable memory) support. This exposes a sysfs file to read
 342           out OTP values.
 343
 344 config EZX_PCAP
 345         bool "PCAP Support"
 346         depends on GENERIC_HARDIRQS && SPI_MASTER
 347         help
 348           This enables the PCAP ASIC present on EZX Phones. This is
 349           needed for MMC, TouchScreen, Sound, USB, etc..
 350
 351 config AB4500_CORE
 352         tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
 353         depends on SPI
 354         help
 355           Select this option to enable access to AB4500 power management
 356           chip. This connects to U8500 on the SSP/SPI bus and exports
 357           read/write functions for the devices to get access to this chip.
 358           This chip embeds various other multimedia funtionalities as well.
 359
 360 config MFD_TIMBERDALE
 361         tristate "Support for the Timberdale FPGA"
 362         select MFD_CORE
 363         depends on PCI && GPIOLIB
 364         ---help---
 365         This is the core driver for the timberdale FPGA. This device is a
 366         multifunction device which exposes numerous platform devices.
 367
 368         The timberdale FPGA can be found on the Intel Atom development board
 369         for in-vehicle infontainment, called Russellville.
 370 endmenu
 371
 372 menu "Multimedia Capabilities Port drivers"
 373         depends on ARCH_SA1100
 374
 375 config MCP
 376         tristate
 377
 378 # Interface drivers
 379 config MCP_SA11X0
 380         tristate "Support SA11x0 MCP interface"
 381         depends on ARCH_SA1100
 382         select MCP
 383
 384 # Chip drivers
 385 config MCP_UCB1200
 386         tristate "Support for UCB1200 / UCB1300"
 387         depends on MCP
 388
 389 config MCP_UCB1200_TS
 390         tristate "Touchscreen interface support"
 391         depends on MCP_UCB1200 && INPUT
 392
 393 endmenu