drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 if HAS_IOMEM
   6 menu "Multifunction device drivers"
   7
   8 config MFD_CORE
   9         tristate
  10         select IRQ_DOMAIN
  11         default n
  12
  13 config MFD_CS5535
  14         tristate "AMD CS5535 and CS5536 southbridge core functions"
  15         select MFD_CORE
  16         depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
  17         ---help---
  18           This is the core driver for CS5535/CS5536 MFD functions.  This is
  19           necessary for using the board's GPIO and MFGPT functionality.
  20
  21 config MFD_ACT8945A
  22         tristate "Active-semi ACT8945A"
  23         select MFD_CORE
  24         select REGMAP_I2C
  25         depends on I2C && OF
  26         help
  27           Support for the ACT8945A PMIC from Active-semi. This device
  28           features three step-down DC/DC converters and four low-dropout
  29           linear regulators, along with a complete ActivePath battery
  30           charger.
  31
  32 config MFD_AS3711
  33         bool "AMS AS3711"
  34         select MFD_CORE
  35         select REGMAP_I2C
  36         select REGMAP_IRQ
  37         depends on I2C=y
  38         help
  39           Support for the AS3711 PMIC from AMS
  40
  41 config MFD_AS3722
  42         bool "ams AS3722 Power Management IC"
  43         select MFD_CORE
  44         select REGMAP_I2C
  45         select REGMAP_IRQ
  46         depends on I2C=y && OF
  47         help
  48           The ams AS3722 is a compact system PMU suitable for mobile phones,
  49           tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
  50           controllers, 11 LDOs, RTC, automatic battery, temperature and
  51           over current monitoring, GPIOs, ADC and a watchdog.
  52
  53 config PMIC_ADP5520
  54         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
  55         depends on I2C=y
  56         help
  57           Say yes here to add support for Analog Devices AD5520 and ADP5501,
  58           Multifunction Power Management IC. This includes
  59           the I2C driver and the core APIs _only_, you have to select
  60           individual components like LCD backlight, LEDs, GPIOs and Kepad
  61           under the corresponding menus.
  62
  63 config MFD_AAT2870_CORE
  64         bool "AnalogicTech AAT2870"
  65         select MFD_CORE
  66         depends on I2C=y
  67         depends on GPIOLIB || COMPILE_TEST
  68         help
  69           If you say yes here you get support for the AAT2870.
  70           This driver provides common support for accessing the device,
  71           additional drivers must be enabled in order to use the
  72           functionality of the device.
  73
  74 config MFD_ATMEL_FLEXCOM
  75         tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
  76         select MFD_CORE
  77         depends on OF
  78         help
  79           Select this to get support for Atmel Flexcom. This is a wrapper
  80           which embeds a SPI controller, a I2C controller and a USART. Only
  81           one function can be used at a time. The choice is done at boot time
  82           by the probe function of this MFD driver according to a device tree
  83           property.
  84
  85 config MFD_ATMEL_HLCDC
  86         tristate "Atmel HLCDC (High-end LCD Controller)"
  87         select MFD_CORE
  88         select REGMAP_MMIO
  89         depends on OF
  90         help
  91           If you say yes here you get support for the HLCDC block.
  92           This driver provides common support for accessing the device,
  93           additional drivers must be enabled in order to use the
  94           functionality of the device.
  95
  96 config MFD_BCM590XX
  97         tristate "Broadcom BCM590xx PMUs"
  98         select MFD_CORE
  99         select REGMAP_I2C
 100         depends on I2C
 101         help
 102           Support for the BCM590xx PMUs from Broadcom
 103
 104 config MFD_AXP20X
 105         tristate
 106         select MFD_CORE
 107         select REGMAP_IRQ
 108
 109 config MFD_AXP20X_I2C
 110         tristate "X-Powers AXP series PMICs with I2C"
 111         select MFD_AXP20X
 112         select REGMAP_I2C
 113         depends on I2C
 114         help
 115           If you say Y here you get support for the X-Powers AXP series power
 116           management ICs (PMICs) controlled with I2C.
 117           This driver include only the core APIs. You have to select individual
 118           components like regulators or the PEK (Power Enable Key) under the
 119           corresponding menus.
 120
 121 config MFD_AXP20X_RSB
 122         tristate "X-Powers AXP series PMICs with RSB"
 123         select MFD_AXP20X
 124         depends on SUNXI_RSB
 125         help
 126           If you say Y here you get support for the X-Powers AXP series power
 127           management ICs (PMICs) controlled with RSB.
 128           This driver include only the core APIs. You have to select individual
 129           components like regulators or the PEK (Power Enable Key) under the
 130           corresponding menus.
 131
 132 config MFD_CROS_EC
 133         tristate "ChromeOS Embedded Controller"
 134         select MFD_CORE
 135         select CHROME_PLATFORMS
 136         select CROS_EC_PROTO
 137         depends on X86 || ARM || COMPILE_TEST
 138         help
 139           If you say Y here you get support for the ChromeOS Embedded
 140           Controller (EC) providing keyboard, battery and power services.
 141           You also need to enable the driver for the bus you are using. The
 142           protocol for talking to the EC is defined by the bus driver.
 143
 144 config MFD_CROS_EC_I2C
 145         tristate "ChromeOS Embedded Controller (I2C)"
 146         depends on MFD_CROS_EC && I2C
 147
 148         help
 149           If you say Y here, you get support for talking to the ChromeOS
 150           EC through an I2C bus. This uses a simple byte-level protocol with
 151           a checksum. Failing accesses will be retried three times to
 152           improve reliability.
 153
 154 config MFD_CROS_EC_SPI
 155         tristate "ChromeOS Embedded Controller (SPI)"
 156         depends on MFD_CROS_EC && SPI
 157
 158         ---help---
 159           If you say Y here, you get support for talking to the ChromeOS EC
 160           through a SPI bus, using a byte-level protocol. Since the EC's
 161           response time cannot be guaranteed, we support ignoring
 162           'pre-amble' bytes before the response actually starts.
 163
 164 config MFD_ASIC3
 165         bool "Compaq ASIC3"
 166         depends on GPIOLIB && ARM
 167         select MFD_CORE
 168          ---help---
 169           This driver supports the ASIC3 multifunction chip found on many
 170           PDAs (mainly iPAQ and HTC based ones)
 171
 172 config PMIC_DA903X
 173         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 174         depends on I2C=y
 175         help
 176           Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
 177           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 178           usually found on PXA processors-based platforms. This includes
 179           the I2C driver and the core APIs _only_, you have to select
 180           individual components like LCD backlight, voltage regulators,
 181           LEDs and battery-charger under the corresponding menus.
 182
 183 config PMIC_DA9052
 184         bool
 185         select MFD_CORE
 186
 187 config MFD_DA9052_SPI
 188         bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
 189         select REGMAP_SPI
 190         select REGMAP_IRQ
 191         select PMIC_DA9052
 192         depends on SPI_MASTER=y
 193         help
 194           Support for the Dialog Semiconductor DA9052 PMIC
 195           when controlled using SPI. This driver provides common support
 196           for accessing the device, additional drivers must be enabled in
 197           order to use the functionality of the device.
 198
 199 config MFD_DA9052_I2C
 200         bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
 201         select REGMAP_I2C
 202         select REGMAP_IRQ
 203         select PMIC_DA9052
 204         depends on I2C=y
 205         help
 206           Support for the Dialog Semiconductor DA9052 PMIC
 207           when controlled using I2C. This driver provides common support
 208           for accessing the device, additional drivers must be enabled in
 209           order to use the functionality of the device.
 210
 211 config MFD_DA9055
 212         bool "Dialog Semiconductor DA9055 PMIC Support"
 213         select REGMAP_I2C
 214         select REGMAP_IRQ
 215         select MFD_CORE
 216         depends on I2C=y
 217         help
 218           Say yes here for support of Dialog Semiconductor DA9055. This is
 219           a Power Management IC. This driver provides common support for
 220           accessing the device as well as the I2C interface to the chip itself.
 221           Additional drivers must be enabled in order to use the functionality
 222           of the device.
 223
 224           This driver can be built as a module. If built as a module it will be
 225           called "da9055"
 226
 227 config MFD_DA9062
 228         tristate "Dialog Semiconductor DA9062 PMIC Support"
 229         select MFD_CORE
 230         select REGMAP_I2C
 231         select REGMAP_IRQ
 232         depends on I2C
 233         help
 234           Say yes here for support for the Dialog Semiconductor DA9062 PMIC.
 235           This includes the I2C driver and core APIs.
 236           Additional drivers must be enabled in order to use the functionality
 237           of the device.
 238
 239 config MFD_DA9063
 240         tristate "Dialog Semiconductor DA9063 PMIC Support"
 241         select MFD_CORE
 242         select REGMAP_I2C
 243         select REGMAP_IRQ
 244         depends on I2C
 245         help
 246           Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
 247           This includes the I2C driver and core APIs.
 248           Additional drivers must be enabled in order to use the functionality
 249           of the device.
 250
 251 config MFD_DA9150
 252         tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
 253         depends on I2C
 254         select MFD_CORE
 255         select REGMAP_I2C
 256         select REGMAP_IRQ
 257         help
 258           This adds support for the DA9150 integrated charger and fuel-gauge
 259           chip. This driver provides common support for accessing the device.
 260           Additional drivers must be enabled in order to use the specific
 261           features of the device.
 262
 263 config MFD_DLN2
 264         tristate "Diolan DLN2 support"
 265         select MFD_CORE
 266         depends on USB
 267         help
 268           This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
 269           DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
 270           etc. must be enabled in order to use the functionality of
 271           the device.
 272
 273 config MFD_MC13XXX
 274         tristate
 275         depends on (SPI_MASTER || I2C)
 276         select MFD_CORE
 277         select REGMAP_IRQ
 278         help
 279           Enable support for the Freescale MC13783 and MC13892 PMICs.
 280           This driver provides common support for accessing the device,
 281           additional drivers must be enabled in order to use the
 282           functionality of the device.
 283
 284 config MFD_MC13XXX_SPI
 285         tristate "Freescale MC13783 and MC13892 SPI interface"
 286         depends on SPI_MASTER
 287         select REGMAP_SPI
 288         select MFD_MC13XXX
 289         help
 290           Select this if your MC13xxx is connected via an SPI bus.
 291
 292 config MFD_MC13XXX_I2C
 293         tristate "Freescale MC13892 I2C interface"
 294         depends on I2C
 295         select REGMAP_I2C
 296         select MFD_MC13XXX
 297         help
 298           Select this if your MC13xxx is connected via an I2C bus.
 299
 300 config MFD_MX25_TSADC
 301         tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
 302         select REGMAP_MMIO
 303         depends on (SOC_IMX25 && OF) || COMPILE_TEST
 304         help
 305           Enable support for the integrated Touchscreen and ADC unit of the
 306           i.MX25 processors. They consist of a conversion queue for general
 307           purpose ADC and a queue for Touchscreens.
 308
 309 config MFD_HI6421_PMIC
 310         tristate "HiSilicon Hi6421 PMU/Codec IC"
 311         depends on OF
 312         select MFD_CORE
 313         select REGMAP_MMIO
 314         help
 315           Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi-
 316           functions, such as regulators, RTC, codec, Coulomb counter, etc.
 317           This driver includes core APIs _only_. You have to select
 318           individul components like voltage regulators under corresponding
 319           menus in order to enable them.
 320           We communicate with the Hi6421 via memory-mapped I/O.
 321
 322 config HTC_EGPIO
 323         bool "HTC EGPIO support"
 324         depends on GPIOLIB && ARM
 325         help
 326             This driver supports the CPLD egpio chip present on
 327             several HTC phones.  It provides basic support for input
 328             pins, output pins, and irqs.
 329
 330 config HTC_PASIC3
 331         tristate "HTC PASIC3 LED/DS1WM chip support"
 332         select MFD_CORE
 333         help
 334           This core driver provides register access for the LED/DS1WM
 335           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
 336           HTC Magician devices, respectively. Actual functionality is
 337           handled by the leds-pasic3 and ds1wm drivers.
 338
 339 config HTC_I2CPLD
 340         bool "HTC I2C PLD chip support"
 341         depends on I2C=y && GPIOLIB
 342         help
 343           If you say yes here you get support for the supposed CPLD
 344           found on omap850 HTC devices like the HTC Wizard and HTC Herald.
 345           This device provides input and output GPIOs through an I2C
 346           interface to one or more sub-chips.
 347
 348 config MFD_INTEL_QUARK_I2C_GPIO
 349         tristate "Intel Quark MFD I2C GPIO"
 350         depends on PCI
 351         depends on X86
 352         depends on COMMON_CLK
 353         select MFD_CORE
 354         help
 355           This MFD provides support for I2C and GPIO that exist only
 356           in a single PCI device. It splits the 2 IO devices to
 357           their respective IO driver.
 358           The GPIO exports a total amount of 8 interrupt-capable GPIOs.
 359
 360 config LPC_ICH
 361         tristate "Intel ICH LPC"
 362         depends on PCI
 363         select MFD_CORE
 364         help
 365           The LPC bridge function of the Intel ICH provides support for
 366           many functional units. This driver provides needed support for
 367           other drivers to control these functions, currently GPIO and
 368           watchdog.
 369
 370 config LPC_SCH
 371         tristate "Intel SCH LPC"
 372         depends on PCI
 373         select MFD_CORE
 374         help
 375           LPC bridge function of the Intel SCH provides support for
 376           System Management Bus and General Purpose I/O.
 377
 378 config INTEL_SOC_PMIC
 379         bool "Support for Intel Atom SoC PMIC"
 380         depends on GPIOLIB
 381         depends on I2C=y
 382         select MFD_CORE
 383         select REGMAP_I2C
 384         select REGMAP_IRQ
 385         help
 386           Select this option to enable support for the PMIC device
 387           on some Intel SoC systems. The PMIC provides ADC, GPIO,
 388           thermal, charger and related power management functions
 389           on these systems.
 390
 391 config MFD_INTEL_LPSS
 392         tristate
 393         select COMMON_CLK
 394         select MFD_CORE
 395
 396 config MFD_INTEL_LPSS_ACPI
 397         tristate "Intel Low Power Subsystem support in ACPI mode"
 398         select MFD_INTEL_LPSS
 399         depends on X86 && ACPI
 400         help
 401           This driver supports Intel Low Power Subsystem (LPSS) devices such as
 402           I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
 403           PCH) in ACPI mode.
 404
 405 config MFD_INTEL_LPSS_PCI
 406         tristate "Intel Low Power Subsystem support in PCI mode"
 407         select MFD_INTEL_LPSS
 408         depends on X86 && PCI
 409         help
 410           This driver supports Intel Low Power Subsystem (LPSS) devices such as
 411           I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
 412           PCH) in PCI mode.
 413
 414 config MFD_INTEL_MSIC
 415         bool "Intel MSIC"
 416         depends on INTEL_SCU_IPC
 417         select MFD_CORE
 418         help
 419           Select this option to enable access to Intel MSIC (Avatele
 420           Passage) chip. This chip embeds audio, battery, GPIO, etc.
 421           devices used in Intel Medfield platforms.
 422
 423 config MFD_IPAQ_MICRO
 424         bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
 425         depends on SA1100_H3100 || SA1100_H3600
 426         select MFD_CORE
 427         help
 428           Select this to get support for the Microcontroller found in
 429           the Compaq iPAQ handheld computers. This is an Atmel
 430           AT90LS8535 microcontroller flashed with a special iPAQ
 431           firmware using the custom protocol implemented in this driver.
 432
 433 config MFD_JANZ_CMODIO
 434         tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 435         select MFD_CORE
 436         depends on PCI
 437         help
 438           This is the core driver for the Janz CMOD-IO PCI MODULbus
 439           carrier board. This device is a PCI to MODULbus bridge which may
 440           host many different types of MODULbus daughterboards, including
 441           CAN and GPIO controllers.
 442
 443 config MFD_JZ4740_ADC
 444         bool "Janz JZ4740 ADC core"
 445         select MFD_CORE
 446         select GENERIC_IRQ_CHIP
 447         depends on MACH_JZ4740
 448         help
 449           Say yes here if you want support for the ADC unit in the JZ4740 SoC.
 450           This driver is necessary for jz4740-battery and jz4740-hwmon driver.
 451
 452 config MFD_KEMPLD
 453         tristate "Kontron module PLD device"
 454         select MFD_CORE
 455         help
 456           This is the core driver for the PLD (Programmable Logic Device) found
 457           on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
 458           device may provide functions like watchdog, GPIO, UART and I2C bus.
 459
 460           The following modules are supported:
 461                 * COMe-bBL6
 462                 * COMe-bHL6
 463                 * COMe-bIP#
 464                 * COMe-bPC2 (ETXexpress-PC)
 465                 * COMe-bSC# (ETXexpress-SC T#)
 466                 * COMe-cBL6
 467                 * COMe-cBT6
 468                 * COMe-cBW6
 469                 * COMe-cCT6
 470                 * COMe-cDC2 (microETXexpress-DC)
 471                 * COMe-cHL6
 472                 * COMe-cPC2 (microETXexpress-PC)
 473                 * COMe-mBT10
 474                 * COMe-mCT10
 475                 * COMe-mTT10 (nanoETXexpress-TT)
 476                 * ETX-OH
 477
 478           This driver can also be built as a module. If so, the module
 479           will be called kempld-core.
 480
 481 config MFD_88PM800
 482         tristate "Marvell 88PM800"
 483         depends on I2C
 484         select REGMAP_I2C
 485         select REGMAP_IRQ
 486         select MFD_CORE
 487         help
 488           This supports for Marvell 88PM800 Power Management IC.
 489           This includes the I2C driver and the core APIs _only_, you have to
 490           select individual components like voltage regulators, RTC and
 491           battery-charger under the corresponding menus.
 492
 493 config MFD_88PM805
 494         tristate "Marvell 88PM805"
 495         depends on I2C
 496         select REGMAP_I2C
 497         select REGMAP_IRQ
 498         select MFD_CORE
 499         help
 500           This supports for Marvell 88PM805 Power Management IC. This includes
 501           the I2C driver and the core APIs _only_, you have to select individual
 502           components like codec device, headset/Mic device under the
 503           corresponding menus.
 504
 505 config MFD_88PM860X
 506         bool "Marvell 88PM8606/88PM8607"
 507         depends on I2C=y
 508         select REGMAP_I2C
 509         select MFD_CORE
 510         help
 511           This supports for Marvell 88PM8606/88PM8607 Power Management IC.
 512           This includes the I2C driver and the core APIs _only_, you have to
 513           select individual components like voltage regulators, RTC and
 514           battery-charger under the corresponding menus.
 515
 516 config MFD_MAX14577
 517         bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"
 518         depends on I2C=y
 519         select MFD_CORE
 520         select REGMAP_I2C
 521         select REGMAP_IRQ
 522         select IRQ_DOMAIN
 523         help
 524           Say yes here to add support for Maxim Semiconductor MAX14577 and
 525           MAX77836 Micro-USB ICs with battery charger.
 526           This driver provides common support for accessing the device;
 527           additional drivers must be enabled in order to use the functionality
 528           of the device.
 529
 530 config MFD_MAX77686
 531         tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
 532         depends on I2C
 533         depends on OF
 534         select MFD_CORE
 535         select REGMAP_I2C
 536         select REGMAP_IRQ
 537         select IRQ_DOMAIN
 538         help
 539           Say yes here to add support for Maxim Semiconductor MAX77686 and
 540           MAX77802 which are Power Management IC with an RTC on chip.
 541           This driver provides common support for accessing the device;
 542           additional drivers must be enabled in order to use the functionality
 543           of the device.
 544
 545 config MFD_MAX77693
 546         bool "Maxim Semiconductor MAX77693 PMIC Support"
 547         depends on I2C=y
 548         select MFD_CORE
 549         select REGMAP_I2C
 550         select REGMAP_IRQ
 551         help
 552           Say yes here to add support for Maxim Semiconductor MAX77693.
 553           This is a companion Power Management IC with Flash, Haptic, Charger,
 554           and MUIC(Micro USB Interface Controller) controls on chip.
 555           This driver provides common support for accessing the device;
 556           additional drivers must be enabled in order to use the functionality
 557           of the device.
 558
 559 config MFD_MAX77843
 560         bool "Maxim Semiconductor MAX77843 PMIC Support"
 561         depends on I2C=y
 562         select MFD_CORE
 563         select REGMAP_I2C
 564         select REGMAP_IRQ
 565         help
 566           Say yes here to add support for Maxim Semiconductor MAX77843.
 567           This is companion Power Management IC with LEDs, Haptic, Charger,
 568           Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
 569           This driver provides common support for accessing the device;
 570           additional drivers must be enabled in order to use the functionality
 571           of the device.
 572
 573 config MFD_MAX8907
 574         tristate "Maxim Semiconductor MAX8907 PMIC Support"
 575         select MFD_CORE
 576         depends on I2C
 577         select REGMAP_I2C
 578         select REGMAP_IRQ
 579         help
 580           Say yes here to add support for Maxim Semiconductor MAX8907. This is
 581           a Power Management IC. This driver provides common support for
 582           accessing the device; additional drivers must be enabled in order
 583           to use the functionality of the device.
 584
 585 config MFD_MAX8925
 586         bool "Maxim Semiconductor MAX8925 PMIC Support"
 587         depends on I2C=y
 588         select MFD_CORE
 589         help
 590           Say yes here to add support for Maxim Semiconductor MAX8925. This is
 591           a Power Management IC. This driver provides common support for
 592           accessing the device, additional drivers must be enabled in order
 593           to use the functionality of the device.
 594
 595 config MFD_MAX8997
 596         bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
 597         depends on I2C=y
 598         select MFD_CORE
 599         select IRQ_DOMAIN
 600         help
 601           Say yes here to add support for Maxim Semiconductor MAX8997/8966.
 602           This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 603           MUIC controls on chip.
 604           This driver provides common support for accessing the device;
 605           additional drivers must be enabled in order to use the functionality
 606           of the device.
 607
 608 config MFD_MAX8998
 609         bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
 610         depends on I2C=y
 611         select MFD_CORE
 612         select IRQ_DOMAIN
 613         help
 614           Say yes here to add support for Maxim Semiconductor MAX8998 and
 615           National Semiconductor LP3974. This is a Power Management IC.
 616           This driver provides common support for accessing the device,
 617           additional drivers must be enabled in order to use the functionality
 618           of the device.
 619
 620 config MFD_MT6397
 621         tristate "MediaTek MT6397 PMIC Support"
 622         select MFD_CORE
 623         select IRQ_DOMAIN
 624         help
 625           Say yes here to add support for MediaTek MT6397 PMIC. This is
 626           a Power Management IC. This driver provides common support for
 627           accessing the device; additional drivers must be enabled in order
 628           to use the functionality of the device.
 629
 630 config MFD_MENF21BMC
 631         tristate "MEN 14F021P00 Board Management Controller Support"
 632         depends on I2C
 633         select MFD_CORE
 634         help
 635           Say yes here to add support for the MEN 14F021P00 BMC
 636           which is a Board Management Controller connected to the I2C bus.
 637           The device supports multiple sub-devices like LED, HWMON and WDT.
 638           This driver provides common support for accessing the devices;
 639           additional drivers must be enabled in order to use the
 640           functionality of the BMC device.
 641
 642           This driver can also be built as a module. If so the module
 643           will be called menf21bmc.
 644
 645 config EZX_PCAP
 646         bool "Motorola EZXPCAP Support"
 647         depends on SPI_MASTER
 648         help
 649           This enables the PCAP ASIC present on EZX Phones. This is
 650           needed for MMC, TouchScreen, Sound, USB, etc..
 651
 652 config MFD_VIPERBOARD
 653         tristate "Nano River Technologies Viperboard"
 654         select MFD_CORE
 655         depends on USB
 656         default n
 657         help
 658           Say yes here if you want support for Nano River Technologies
 659           Viperboard.
 660           There are mfd cell drivers available for i2c master, adc and
 661           both gpios found on the board. The spi part does not yet
 662           have a driver.
 663           You need to select the mfd cell drivers separately.
 664           The drivers do not support all features the board exposes.
 665
 666 config MFD_RETU
 667         tristate "Nokia Retu and Tahvo multi-function device"
 668         select MFD_CORE
 669         depends on I2C
 670         select REGMAP_IRQ
 671         help
 672           Retu and Tahvo are a multi-function devices found on Nokia
 673           Internet Tablets (770, N800 and N810).
 674
 675 config MFD_PCF50633
 676         tristate "NXP PCF50633"
 677         depends on I2C
 678         select REGMAP_I2C
 679         help
 680           Say yes here if you have NXP PCF50633 chip on your board.
 681           This core driver provides register access and IRQ handling
 682           facilities, and registers devices for the various functions
 683           so that function-specific drivers can bind to them.
 684
 685 config PCF50633_ADC
 686         tristate "NXP PCF50633 ADC"
 687         depends on MFD_PCF50633
 688         help
 689          Say yes here if you want to include support for ADC in the
 690          NXP PCF50633 chip.
 691
 692 config PCF50633_GPIO
 693         tristate "NXP PCF50633 GPIO"
 694         depends on MFD_PCF50633
 695         help
 696          Say yes here if you want to include support GPIO for pins on
 697          the PCF50633 chip.
 698
 699 config UCB1400_CORE
 700         tristate "Philips UCB1400 Core driver"
 701         depends on AC97_BUS
 702         depends on GPIOLIB
 703         help
 704           This enables support for the Philips UCB1400 core functions.
 705           The UCB1400 is an AC97 audio codec.
 706
 707           To compile this driver as a module, choose M here: the
 708           module will be called ucb1400_core.
 709
 710 config MFD_PM8XXX
 711         tristate
 712
 713 config MFD_PM8921_CORE
 714         tristate "Qualcomm PM8921 PMIC chip"
 715         depends on (ARM || HEXAGON)
 716         select IRQ_DOMAIN
 717         select MFD_CORE
 718         select MFD_PM8XXX
 719         select REGMAP
 720         help
 721           If you say yes to this option, support will be included for the
 722           built-in PM8921 PMIC chip.
 723
 724           This is required if your board has a PM8921 and uses its features,
 725           such as: MPPs, GPIOs, regulators, interrupts, and PWM.
 726
 727           Say M here if you want to include support for PM8921 chip as a module.
 728           This will build a module called "pm8921-core".
 729
 730 config MFD_QCOM_RPM
 731         tristate "Qualcomm Resource Power Manager (RPM)"
 732         depends on ARCH_QCOM && OF
 733         help
 734           If you say yes to this option, support will be included for the
 735           Resource Power Manager system found in the Qualcomm 8660, 8960 and
 736           8064 based devices.
 737
 738           This is required to access many regulators, clocks and bus
 739           frequencies controlled by the RPM on these devices.
 740
 741           Say M here if you want to include support for the Qualcomm RPM as a
 742           module. This will build a module called "qcom_rpm".
 743
 744 config MFD_SPMI_PMIC
 745         tristate "Qualcomm SPMI PMICs"
 746         depends on ARCH_QCOM || COMPILE_TEST
 747         depends on OF
 748         depends on SPMI
 749         select REGMAP_SPMI
 750         help
 751           This enables support for the Qualcomm SPMI PMICs.
 752           These PMICs are currently used with the Snapdragon 800 series of
 753           SoCs.  Note, that this will only be useful paired with descriptions
 754           of the independent functions as children nodes in the device tree.
 755
 756           Say M here if you want to include support for the SPMI PMIC
 757           series as a module.  The module will be called "qcom-spmi-pmic".
 758
 759 config MFD_RDC321X
 760         tristate "RDC R-321x southbridge"
 761         select MFD_CORE
 762         depends on PCI
 763         help
 764           Say yes here if you want to have support for the RDC R-321x SoC
 765           southbridge which provides access to GPIOs and Watchdog using the
 766           southbridge PCI device configuration space.
 767
 768 config MFD_RTSX_PCI
 769         tristate "Realtek PCI-E card reader"
 770         depends on PCI
 771         select MFD_CORE
 772         help
 773           This supports for Realtek PCI-Express card reader including rts5209,
 774           rts5227, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411, etc.
 775           Realtek card reader supports access to many types of memory cards,
 776           such as Memory Stick, Memory Stick Pro, Secure Digital and
 777           MultiMediaCard.
 778
 779 config MFD_RT5033
 780         tristate "Richtek RT5033 Power Management IC"
 781         depends on I2C
 782         select MFD_CORE
 783         select REGMAP_I2C
 784         select REGMAP_IRQ
 785         help
 786           This driver provides for the Richtek RT5033 Power Management IC,
 787           which includes the I2C driver and the Core APIs. This driver provides
 788           common support for accessing the device. The device supports multiple
 789           sub-devices like charger, fuel gauge, flash LED, current source,
 790           LDO and Buck.
 791
 792 config MFD_RTSX_USB
 793         tristate "Realtek USB card reader"
 794         depends on USB
 795         select MFD_CORE
 796         help
 797           Select this option to get support for Realtek USB 2.0 card readers
 798           including RTS5129, RTS5139, RTS5179 and RTS5170.
 799           Realtek card reader supports access to many types of memory cards,
 800           such as Memory Stick Pro, Secure Digital and MultiMediaCard.
 801
 802 config MFD_RC5T583
 803         bool "Ricoh RC5T583 Power Management system device"
 804         depends on I2C=y
 805         select MFD_CORE
 806         select REGMAP_I2C
 807         help
 808           Select this option to get support for the RICOH583 Power
 809           Management system device.
 810           This driver provides common support for accessing the device
 811           through i2c interface. The device supports multiple sub-devices
 812           like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
 813           Additional drivers must be enabled in order to use the
 814           different functionality of the device.
 815
 816 config MFD_RK808
 817         tristate "Rockchip RK808 Power Management chip"
 818         depends on I2C && OF
 819         select MFD_CORE
 820         select REGMAP_I2C
 821         select REGMAP_IRQ
 822         help
 823           If you say yes here you get support for the RK808
 824           Power Management chips.
 825           This driver provides common support for accessing the device
 826           through I2C interface. The device supports multiple sub-devices
 827           including interrupts, RTC, LDO & DCDC regulators, and onkey.
 828
 829 config MFD_RN5T618
 830         tristate "Ricoh RN5T5618 PMIC"
 831         depends on I2C
 832         select MFD_CORE
 833         select REGMAP_I2C
 834         help
 835           Say yes here to add support for the Ricoh RN5T618 PMIC. This
 836           driver provides common support for accessing the device,
 837           additional drivers must be enabled in order to use the
 838           functionality of the device.
 839
 840 config MFD_SEC_CORE
 841         bool "SAMSUNG Electronics PMIC Series Support"
 842         depends on I2C=y
 843         select MFD_CORE
 844         select REGMAP_I2C
 845         select REGMAP_IRQ
 846         help
 847          Support for the Samsung Electronics MFD series.
 848          This driver provides common support for accessing the device,
 849          additional drivers must be enabled in order to use the functionality
 850          of the device
 851
 852 config MFD_SI476X_CORE
 853         tristate "Silicon Laboratories 4761/64/68 AM/FM radio."
 854         depends on I2C
 855         select MFD_CORE
 856         select REGMAP_I2C
 857         help
 858           This is the core driver for the SI476x series of AM/FM
 859           radio. This MFD driver connects the radio-si476x V4L2 module
 860           and the si476x audio codec.
 861
 862           To compile this driver as a module, choose M here: the
 863           module will be called si476x-core.
 864
 865 config MFD_SM501
 866         tristate "Silicon Motion SM501"
 867          ---help---
 868           This is the core driver for the Silicon Motion SM501 multimedia
 869           companion chip. This device is a multifunction device which may
 870           provide numerous interfaces including USB host controller, USB gadget,
 871           asynchronous serial ports, audio functions, and a dual display video
 872           interface. The device may be connected by PCI or local bus with
 873           varying functions enabled.
 874
 875 config MFD_SM501_GPIO
 876         bool "Export GPIO via GPIO layer"
 877         depends on MFD_SM501 && GPIOLIB
 878          ---help---
 879          This option uses the gpio library layer to export the 64 GPIO
 880          lines on the SM501. The platform data is used to supply the
 881          base number for the first GPIO line to register.
 882
 883 config MFD_SKY81452
 884         tristate "Skyworks Solutions SKY81452"
 885         select MFD_CORE
 886         select REGMAP_I2C
 887         depends on I2C
 888         help
 889           This is the core driver for the Skyworks SKY81452 backlight and
 890           voltage regulator device.
 891
 892           This driver can also be built as a module.  If so, the module
 893           will be called sky81452.
 894
 895 config MFD_SMSC
 896        bool "SMSC ECE1099 series chips"
 897        depends on I2C=y
 898        select MFD_CORE
 899        select REGMAP_I2C
 900        help
 901         If you say yes here you get support for the
 902         ece1099 chips from SMSC.
 903
 904         To compile this driver as a module, choose M here: the
 905         module will be called smsc.
 906
 907 config ABX500_CORE
 908         bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 909         default y if ARCH_U300 || ARCH_U8500
 910         help
 911           Say yes here if you have the ABX500 Mixed Signal IC family
 912           chips. This core driver expose register access functions.
 913           Functionality specific drivers using these functions can
 914           remain unchanged when IC changes. Binding of the functions to
 915           actual register access is done by the IC core driver.
 916
 917 config AB3100_CORE
 918         bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 919         depends on I2C=y && ABX500_CORE
 920         select MFD_CORE
 921         default y if ARCH_U300
 922         help
 923           Select this to enable the AB3100 Mixed Signal IC core
 924           functionality. This connects to a AB3100 on the I2C bus
 925           and expose a number of symbols needed for dependent devices
 926           to read and write registers and subscribe to events from
 927           this multi-functional IC. This is needed to use other features
 928           of the AB3100 such as battery-backed RTC, charging control,
 929           LEDs, vibrator, system power and temperature, power management
 930           and ALSA sound.
 931
 932 config AB3100_OTP
 933         tristate "ST-Ericsson AB3100 OTP functions"
 934         depends on AB3100_CORE
 935         default y if AB3100_CORE
 936         help
 937           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 938           programmable memory) support. This exposes a sysfs file to read
 939           out OTP values.
 940
 941 config AB8500_CORE
 942         bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 943         depends on ABX500_CORE && MFD_DB8500_PRCMU
 944         select POWER_SUPPLY
 945         select MFD_CORE
 946         select IRQ_DOMAIN
 947         help
 948           Select this option to enable access to AB8500 power management
 949           chip. This connects to U8500 either on the SSP/SPI bus (deprecated
 950           since hardware version v1.0) or the I2C bus via PRCMU. It also adds
 951           the irq_chip parts for handling the Mixed Signal chip events.
 952           This chip embeds various other multimedia funtionalities as well.
 953
 954 config AB8500_DEBUG
 955        bool "Enable debug info via debugfs"
 956        depends on AB8500_GPADC && DEBUG_FS
 957        default y if DEBUG_FS
 958        help
 959          Select this option if you want debug information using the debug
 960          filesystem, debugfs.
 961
 962 config AB8500_GPADC
 963         bool "ST-Ericsson AB8500 GPADC driver"
 964         depends on AB8500_CORE && REGULATOR_AB8500
 965         default y
 966         help
 967           AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
 968
 969 config MFD_DB8500_PRCMU
 970         bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 971         depends on UX500_SOC_DB8500
 972         select MFD_CORE
 973         help
 974           Select this option to enable support for the DB8500 Power Reset
 975           and Control Management Unit. This is basically an autonomous
 976           system controller running an XP70 microprocessor, which is accessed
 977           through a register map.
 978
 979 config MFD_STMPE
 980         bool "STMicroelectronics STMPE"
 981         depends on (I2C=y || SPI_MASTER=y)
 982         depends on OF
 983         select MFD_CORE
 984         help
 985           Support for the STMPE family of I/O Expanders from
 986           STMicroelectronics.
 987
 988           Currently supported devices are:
 989
 990                 STMPE811: GPIO, Touchscreen
 991                 STMPE1601: GPIO, Keypad
 992                 STMPE1801: GPIO, Keypad
 993                 STMPE2401: GPIO, Keypad
 994                 STMPE2403: GPIO, Keypad
 995
 996           This driver provides common support for accessing the device,
 997           additional drivers must be enabled in order to use the functionality
 998           of the device.  Currently available sub drivers are:
 999
1000                 GPIO: stmpe-gpio
1001                 Keypad: stmpe-keypad
1002                 Touchscreen: stmpe-ts
1003
1004 menu "STMicroelectronics STMPE Interface Drivers"
1005 depends on MFD_STMPE
1006
1007 config STMPE_I2C
1008         bool "STMicroelectronics STMPE I2C Interface"
1009         depends on I2C=y
1010         default y
1011         help
1012           This is used to enable I2C interface of STMPE
1013
1014 config STMPE_SPI
1015         bool "STMicroelectronics STMPE SPI Interface"
1016         depends on SPI_MASTER
1017         help
1018           This is used to enable SPI interface of STMPE
1019 endmenu
1020
1021 config MFD_STA2X11
1022         bool "STMicroelectronics STA2X11"
1023         depends on STA2X11
1024         select MFD_CORE
1025         select REGMAP_MMIO
1026
1027 config MFD_SUN6I_PRCM
1028         bool "Allwinner A31 PRCM controller"
1029         depends on ARCH_SUNXI
1030         select MFD_CORE
1031         help
1032           Support for the PRCM (Power/Reset/Clock Management) unit available
1033           in A31 SoC.
1034
1035 config MFD_SYSCON
1036         bool "System Controller Register R/W Based on Regmap"
1037         select REGMAP_MMIO
1038         help
1039           Select this option to enable accessing system control registers
1040           via regmap.
1041
1042 config MFD_DAVINCI_VOICECODEC
1043         tristate
1044         select MFD_CORE
1045         select REGMAP_MMIO
1046
1047 config MFD_TI_AM335X_TSCADC
1048         tristate "TI ADC / Touch Screen chip support"
1049         select MFD_CORE
1050         select REGMAP
1051         select REGMAP_MMIO
1052         help
1053           If you say yes here you get support for Texas Instruments series
1054           of Touch Screen /ADC chips.
1055           To compile this driver as a module, choose M here: the
1056           module will be called ti_am335x_tscadc.
1057
1058 config MFD_DM355EVM_MSP
1059         bool "TI DaVinci DM355 EVM microcontroller"
1060         depends on I2C=y && MACH_DAVINCI_DM355_EVM
1061         help
1062           This driver supports the MSP430 microcontroller used on these
1063           boards.  MSP430 firmware manages resets and power sequencing,
1064           inputs from buttons and the IR remote, LEDs, an RTC, and more.
1065
1066 config MFD_LP3943
1067         tristate "TI/National Semiconductor LP3943 MFD Driver"
1068         depends on I2C
1069         select MFD_CORE
1070         select REGMAP_I2C
1071         help
1072           Support for the TI/National Semiconductor LP3943.
1073           This driver consists of GPIO and PWM drivers.
1074           With these functionalities, it can be used for LED string control or
1075           general usage such like a GPIO controller and a PWM controller.
1076
1077 config MFD_LP8788
1078         bool "TI LP8788 Power Management Unit Driver"
1079         depends on I2C=y
1080         select MFD_CORE
1081         select REGMAP_I2C
1082         select IRQ_DOMAIN
1083         help
1084           TI LP8788 PMU supports regulators, battery charger, RTC,
1085           ADC, backlight driver and current sinks.
1086
1087 config MFD_OMAP_USB_HOST
1088         bool "TI OMAP USBHS core and TLL driver"
1089         depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
1090         default y
1091         help
1092           This is the core driver for the OAMP EHCI and OHCI drivers.
1093           This MFD driver does the required setup functionalities for
1094           OMAP USB Host drivers.
1095
1096 config MFD_PALMAS
1097         bool "TI Palmas series chips"
1098         select MFD_CORE
1099         select REGMAP_I2C
1100         select REGMAP_IRQ
1101         depends on I2C=y
1102         help
1103           If you say yes here you get support for the Palmas
1104           series of PMIC chips from Texas Instruments.
1105
1106 config TPS6105X
1107         tristate "TI TPS61050/61052 Boost Converters"
1108         depends on I2C
1109         select REGMAP_I2C
1110         select REGULATOR
1111         select MFD_CORE
1112         select REGULATOR_FIXED_VOLTAGE
1113         help
1114           This option enables a driver for the TP61050/TPS61052
1115           high-power "white LED driver". This boost converter is
1116           sometimes used for other things than white LEDs, and
1117           also contains a GPIO pin.
1118
1119 config TPS65010
1120         tristate "TI TPS6501x Power Management chips"
1121         depends on I2C && GPIOLIB
1122         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
1123         help
1124           If you say yes here you get support for the TPS6501x series of
1125           Power Management chips.  These include voltage regulators,
1126           lithium ion/polymer battery charging, and other features that
1127           are often used in portable devices like cell phones and cameras.
1128
1129           This driver can also be built as a module.  If so, the module
1130           will be called tps65010.
1131
1132 config TPS6507X
1133         tristate "TI TPS6507x Power Management / Touch Screen chips"
1134         select MFD_CORE
1135         depends on I2C
1136         help
1137           If you say yes here you get support for the TPS6507x series of
1138           Power Management / Touch Screen chips.  These include voltage
1139           regulators, lithium ion/polymer battery charging, touch screen
1140           and other features that are often used in portable devices.
1141           This driver can also be built as a module.  If so, the module
1142           will be called tps6507x.
1143
1144 config MFD_TPS65086
1145         tristate "TI TPS65086 Power Management Integrated Chips (PMICs)"
1146         select REGMAP
1147         select REGMAP_IRQ
1148         select REGMAP_I2C
1149         depends on I2C
1150         help
1151           If you say yes here you get support for the TPS65086 series of
1152           Power Management chips.
1153           This driver provides common support for accessing the device,
1154           additional drivers must be enabled in order to use the
1155           functionality of the device.
1156
1157 config TPS65911_COMPARATOR
1158         tristate
1159
1160 config MFD_TPS65090
1161         bool "TI TPS65090 Power Management chips"
1162         depends on I2C=y
1163         select MFD_CORE
1164         select REGMAP_I2C
1165         select REGMAP_IRQ
1166         help
1167           If you say yes here you get support for the TPS65090 series of
1168           Power Management chips.
1169           This driver provides common support for accessing the device,
1170           additional drivers must be enabled in order to use the
1171           functionality of the device.
1172
1173 config MFD_TPS65217
1174         tristate "TI TPS65217 Power Management / White LED chips"
1175         depends on I2C
1176         select MFD_CORE
1177         select REGMAP_I2C
1178         help
1179           If you say yes here you get support for the TPS65217 series of
1180           Power Management / White LED chips.
1181           These include voltage regulators, lithium ion/polymer battery
1182           charger, wled and other features that are often used in portable
1183           devices.
1184
1185           This driver can also be built as a module.  If so, the module
1186           will be called tps65217.
1187
1188 config MFD_TPS65218
1189         tristate "TI TPS65218 Power Management chips"
1190         depends on I2C
1191         select MFD_CORE
1192         select REGMAP_I2C
1193         select REGMAP_IRQ
1194         help
1195           If you say yes here you get support for the TPS65218 series of
1196           Power Management chips.
1197           These include voltage regulators, gpio and other features
1198           that are often used in portable devices. Only regulator
1199           component is currently supported.
1200
1201           This driver can also be built as a module.  If so, the module
1202           will be called tps65218.
1203
1204 config MFD_TPS6586X
1205         bool "TI TPS6586x Power Management chips"
1206         depends on I2C=y
1207         select MFD_CORE
1208         select REGMAP_I2C
1209         help
1210           If you say yes here you get support for the TPS6586X series of
1211           Power Management chips.
1212           This driver provides common support for accessing the device,
1213           additional drivers must be enabled in order to use the
1214           functionality of the device.
1215
1216           This driver can also be built as a module.  If so, the module
1217           will be called tps6586x.
1218
1219 config MFD_TPS65910
1220         bool "TI TPS65910 Power Management chip"
1221         depends on I2C=y
1222         depends on GPIOLIB || COMPILE_TEST
1223         select MFD_CORE
1224         select REGMAP_I2C
1225         select REGMAP_IRQ
1226         select IRQ_DOMAIN
1227         help
1228           if you say yes here you get support for the TPS65910 series of
1229           Power Management chips.
1230
1231 config MFD_TPS65912
1232         tristate
1233         select MFD_CORE
1234         select REGMAP
1235         select REGMAP_IRQ
1236
1237 config MFD_TPS65912_I2C
1238         tristate "TI TPS65912 Power Management chip with I2C"
1239         select MFD_TPS65912
1240         select REGMAP_I2C
1241         depends on I2C
1242         help
1243           If you say yes here you get support for the TPS65912 series of
1244           PM chips with I2C interface.
1245
1246 config MFD_TPS65912_SPI
1247         tristate "TI TPS65912 Power Management chip with SPI"
1248         select MFD_TPS65912
1249         select REGMAP_SPI
1250         depends on SPI_MASTER
1251         help
1252           If you say yes here you get support for the TPS65912 series of
1253           PM chips with SPI interface.
1254
1255 config MFD_TPS80031
1256         bool "TI TPS80031/TPS80032 Power Management chips"
1257         depends on I2C=y
1258         select MFD_CORE
1259         select REGMAP_I2C
1260         select REGMAP_IRQ
1261         help
1262           If you say yes here you get support for the Texas Instruments
1263           TPS80031/ TPS80032 Fully Integrated Power Management with Power
1264           Path and Battery Charger. The device provides five configurable
1265           step-down converters, 11 general purpose LDOs, USB OTG Module,
1266           ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
1267           Power Path from USB, 32K clock generator.
1268
1269 config TWL4030_CORE
1270         bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
1271         depends on I2C=y
1272         select IRQ_DOMAIN
1273         select REGMAP_I2C
1274         help
1275           Say yes here if you have TWL4030 / TWL6030 family chip on your board.
1276           This core driver provides register access and IRQ handling
1277           facilities, and registers devices for the various functions
1278           so that function-specific drivers can bind to them.
1279
1280           These multi-function chips are found on many OMAP2 and OMAP3
1281           boards, providing power management, RTC, GPIO, keypad, a
1282           high speed USB OTG transceiver, an audio codec (on most
1283           versions) and many other features.
1284
1285 config TWL4030_POWER
1286         bool "TI TWL4030 power resources"
1287         depends on TWL4030_CORE && ARM
1288         help
1289           Say yes here if you want to use the power resources on the
1290           TWL4030 family chips.  Most of these resources are regulators,
1291           which have a separate driver; some are control signals, such
1292           as clock request handshaking.
1293
1294           This driver uses board-specific data to initialize the resources
1295           and load scripts controlling which resources are switched off/on
1296           or reset when a sleep, wakeup or warm reset event occurs.
1297
1298 config MFD_TWL4030_AUDIO
1299         bool "TI TWL4030 Audio"
1300         depends on TWL4030_CORE
1301         select MFD_CORE
1302         default n
1303
1304 config TWL6040_CORE
1305         bool "TI TWL6040 audio codec"
1306         depends on I2C=y
1307         select MFD_CORE
1308         select REGMAP_I2C
1309         select REGMAP_IRQ
1310         default n
1311         help
1312           Say yes here if you want support for Texas Instruments TWL6040 audio
1313           codec.
1314           This driver provides common support for accessing the device,
1315           additional drivers must be enabled in order to use the
1316           functionality of the device (audio, vibra).
1317
1318 config MENELAUS
1319         bool "TI TWL92330/Menelaus PM chip"
1320         depends on I2C=y && ARCH_OMAP2
1321         help
1322           If you say yes here you get support for the Texas Instruments
1323           TWL92330/Menelaus Power Management chip. This include voltage
1324           regulators, Dual slot memory card transceivers, real-time clock
1325           and other features that are often used in portable devices like
1326           cell phones and PDAs.
1327
1328 config MFD_WL1273_CORE
1329         tristate "TI WL1273 FM radio"
1330         depends on I2C
1331         select MFD_CORE
1332         default n
1333         help
1334           This is the core driver for the TI WL1273 FM radio. This MFD
1335           driver connects the radio-wl1273 V4L2 module and the wl1273
1336           audio codec.
1337
1338 config MFD_LM3533
1339         tristate "TI/National Semiconductor LM3533 Lighting Power chip"
1340         depends on I2C
1341         select MFD_CORE
1342         select REGMAP_I2C
1343         help
1344           Say yes here to enable support for National Semiconductor / TI
1345           LM3533 Lighting Power chips.
1346
1347           This driver provides common support for accessing the device;
1348           additional drivers must be enabled in order to use the LED,
1349           backlight or ambient-light-sensor functionality of the device.
1350
1351 config MFD_TIMBERDALE
1352         tristate "Timberdale FPGA"
1353         select MFD_CORE
1354         depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST)
1355         ---help---
1356         This is the core driver for the timberdale FPGA. This device is a
1357         multifunction device which exposes numerous platform devices.
1358
1359         The timberdale FPGA can be found on the Intel Atom development board
1360         for in-vehicle infontainment, called Russellville.
1361
1362 config MFD_TC3589X
1363         bool "Toshiba TC35892 and variants"
1364         depends on I2C=y
1365         depends on OF
1366         select MFD_CORE
1367         help
1368           Support for the Toshiba TC35892 and variants I/O Expander.
1369
1370           This driver provides common support for accessing the device,
1371           additional drivers must be enabled in order to use the
1372           functionality of the device.
1373
1374 config MFD_TMIO
1375         bool
1376         default n
1377
1378 config MFD_T7L66XB
1379         bool "Toshiba T7L66XB"
1380         depends on ARM && HAVE_CLK
1381         select MFD_CORE
1382         select MFD_TMIO
1383         help
1384           Support for Toshiba Mobile IO Controller T7L66XB
1385
1386 config MFD_TC6387XB
1387         bool "Toshiba TC6387XB"
1388         depends on ARM && HAVE_CLK
1389         select MFD_CORE
1390         select MFD_TMIO
1391         help
1392           Support for Toshiba Mobile IO Controller TC6387XB
1393
1394 config MFD_TC6393XB
1395         bool "Toshiba TC6393XB"
1396         depends on ARM && HAVE_CLK
1397         select GPIOLIB
1398         select MFD_CORE
1399         select MFD_TMIO
1400         help
1401           Support for Toshiba Mobile IO Controller TC6393XB
1402
1403 config MFD_VX855
1404         tristate "VIA VX855/VX875 integrated south bridge"
1405         depends on PCI
1406         select MFD_CORE
1407         help
1408           Say yes here to enable support for various functions of the
1409           VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
1410           and/or vx855_gpio drivers for this to do anything useful.
1411
1412 config MFD_ARIZONA
1413         select REGMAP
1414         select REGMAP_IRQ
1415         select MFD_CORE
1416         bool
1417
1418 config MFD_ARIZONA_I2C
1419         tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C"
1420         select MFD_ARIZONA
1421         select REGMAP_I2C
1422         depends on I2C
1423         help
1424           Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform
1425           audio SoC core functionality controlled via I2C.
1426
1427 config MFD_ARIZONA_SPI
1428         tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI"
1429         select MFD_ARIZONA
1430         select REGMAP_SPI
1431         depends on SPI_MASTER
1432         help
1433           Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform
1434           audio SoC core functionality controlled via SPI.
1435
1436 config MFD_CS47L24
1437         bool "Cirrus Logic CS47L24 and WM1831"
1438         depends on MFD_ARIZONA
1439         help
1440           Support for Cirrus Logic CS47L24 and WM1831 low power audio SoC
1441
1442 config MFD_WM5102
1443         bool "Wolfson Microelectronics WM5102"
1444         depends on MFD_ARIZONA
1445         help
1446           Support for Wolfson Microelectronics WM5102 low power audio SoC
1447
1448 config MFD_WM5110
1449         bool "Wolfson Microelectronics WM5110 and WM8280/WM8281"
1450         depends on MFD_ARIZONA
1451         help
1452           Support for Wolfson Microelectronics WM5110 and WM8280/WM8281
1453           low power audio SoC
1454
1455 config MFD_WM8997
1456         bool "Wolfson Microelectronics WM8997"
1457         depends on MFD_ARIZONA
1458         help
1459           Support for Wolfson Microelectronics WM8997 low power audio SoC
1460
1461 config MFD_WM8998
1462         bool "Wolfson Microelectronics WM8998"
1463         depends on MFD_ARIZONA
1464         help
1465           Support for Wolfson Microelectronics WM8998 low power audio SoC
1466
1467 config MFD_WM8400
1468         bool "Wolfson Microelectronics WM8400"
1469         select MFD_CORE
1470         depends on I2C=y
1471         select REGMAP_I2C
1472         help
1473           Support for the Wolfson Microelecronics WM8400 PMIC and audio
1474           CODEC.  This driver provides common support for accessing
1475           the device, additional drivers must be enabled in order to use
1476           the functionality of the device.
1477
1478 config MFD_WM831X
1479         bool
1480
1481 config MFD_WM831X_I2C
1482         bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
1483         select MFD_CORE
1484         select MFD_WM831X
1485         select REGMAP_I2C
1486         select IRQ_DOMAIN
1487         depends on I2C=y
1488         help
1489           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
1490           when controlled using I2C.  This driver provides common support
1491           for accessing the device, additional drivers must be enabled in
1492           order to use the functionality of the device.
1493
1494 config MFD_WM831X_SPI
1495         bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
1496         select MFD_CORE
1497         select MFD_WM831X
1498         select REGMAP_SPI
1499         select IRQ_DOMAIN
1500         depends on SPI_MASTER
1501         help
1502           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
1503           when controlled using SPI.  This driver provides common support
1504           for accessing the device, additional drivers must be enabled in
1505           order to use the functionality of the device.
1506
1507 config MFD_WM8350
1508         bool
1509
1510 config MFD_WM8350_I2C
1511         bool "Wolfson Microelectronics WM8350 with I2C"
1512         select MFD_WM8350
1513         depends on I2C=y
1514         help
1515           The WM8350 is an integrated audio and power management
1516           subsystem with watchdog and RTC functionality for embedded
1517           systems.  This option enables core support for the WM8350 with
1518           I2C as the control interface.  Additional options must be
1519           selected to enable support for the functionality of the chip.
1520
1521 config MFD_WM8994
1522         tristate "Wolfson Microelectronics WM8994"
1523         select MFD_CORE
1524         select REGMAP_I2C
1525         select REGMAP_IRQ
1526         depends on I2C
1527         help
1528           The WM8994 is a highly integrated hi-fi CODEC designed for
1529           smartphone applications.  As well as audio functionality it
1530           has on board GPIO and regulator functionality which is
1531           supported via the relevant subsystems.  This driver provides
1532           core support for the WM8994, in order to use the actual
1533           functionaltiy of the device other drivers must be enabled.
1534
1535 config MFD_STW481X
1536         tristate "Support for ST Microelectronics STw481x"
1537         depends on I2C && (ARCH_NOMADIK || COMPILE_TEST)
1538         select REGMAP_I2C
1539         select MFD_CORE
1540         help
1541           Select this option to enable the STw481x chip driver used
1542           in various ST Microelectronics and ST-Ericsson embedded
1543           Nomadik series.
1544
1545 menu "Multimedia Capabilities Port drivers"
1546         depends on ARCH_SA1100
1547
1548 config MCP
1549         tristate
1550
1551 # Interface drivers
1552 config MCP_SA11X0
1553         tristate "Support SA11x0 MCP interface"
1554         depends on ARCH_SA1100
1555         select MCP
1556
1557 # Chip drivers
1558 config MCP_UCB1200
1559         tristate "Support for UCB1200 / UCB1300"
1560         depends on MCP_SA11X0
1561         select MCP
1562
1563 config MCP_UCB1200_TS
1564         tristate "Touchscreen interface support"
1565         depends on MCP_UCB1200 && INPUT
1566
1567 endmenu
1568
1569 config MFD_VEXPRESS_SYSREG
1570         bool "Versatile Express System Registers"
1571         depends on VEXPRESS_CONFIG && GPIOLIB
1572         default y
1573         select CLKSRC_MMIO
1574         select GPIO_GENERIC_PLATFORM
1575         select MFD_CORE
1576         select MFD_SYSCON
1577         help
1578           System Registers are the platform configuration block
1579           on the ARM Ltd. Versatile Express board.
1580
1581 endmenu
1582 endif