drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 if HAS_IOMEM
   6 menu "Multifunction device drivers"
   7
   8 config MFD_CORE
   9         tristate
  10         select IRQ_DOMAIN
  11         default n
  12
  13 config MFD_88PM860X
  14         bool "Support Marvell 88PM8606/88PM8607"
  15         depends on I2C=y && GENERIC_HARDIRQS
  16         select REGMAP_I2C
  17         select MFD_CORE
  18         help
  19           This supports for Marvell 88PM8606/88PM8607 Power Management IC.
  20           This includes the I2C driver and the core APIs _only_, you have to
  21           select individual components like voltage regulators, RTC and
  22           battery-charger under the corresponding menus.
  23
  24 config MFD_88PM800
  25         tristate "Support Marvell 88PM800"
  26         depends on I2C=y && GENERIC_HARDIRQS
  27         select REGMAP_I2C
  28         select REGMAP_IRQ
  29         select MFD_CORE
  30         help
  31           This supports for Marvell 88PM800 Power Management IC.
  32           This includes the I2C driver and the core APIs _only_, you have to
  33           select individual components like voltage regulators, RTC and
  34           battery-charger under the corresponding menus.
  35
  36 config MFD_88PM805
  37         tristate "Support Marvell 88PM805"
  38         depends on I2C=y && GENERIC_HARDIRQS
  39         select REGMAP_I2C
  40         select REGMAP_IRQ
  41         select MFD_CORE
  42         help
  43           This supports for Marvell 88PM805 Power Management IC. This includes
  44           the I2C driver and the core APIs _only_, you have to select individual
  45           components like codec device, headset/Mic device under the
  46           corresponding menus.
  47
  48 config MFD_SM501
  49         tristate "Support for Silicon Motion SM501"
  50          ---help---
  51           This is the core driver for the Silicon Motion SM501 multimedia
  52           companion chip. This device is a multifunction device which may
  53           provide numerous interfaces including USB host controller, USB gadget,
  54           asynchronous serial ports, audio functions, and a dual display video
  55           interface. The device may be connected by PCI or local bus with
  56           varying functions enabled.
  57
  58 config MFD_SM501_GPIO
  59         bool "Export GPIO via GPIO layer"
  60         depends on MFD_SM501 && GPIOLIB
  61          ---help---
  62          This option uses the gpio library layer to export the 64 GPIO
  63          lines on the SM501. The platform data is used to supply the
  64          base number for the first GPIO line to register.
  65
  66 config MFD_ASIC3
  67         bool "Support for Compaq ASIC3"
  68         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  69         select MFD_CORE
  70          ---help---
  71           This driver supports the ASIC3 multifunction chip found on many
  72           PDAs (mainly iPAQ and HTC based ones)
  73
  74 config MFD_DAVINCI_VOICECODEC
  75         tristate
  76         select MFD_CORE
  77
  78 config MFD_DM355EVM_MSP
  79         bool "DaVinci DM355 EVM microcontroller"
  80         depends on I2C=y && MACH_DAVINCI_DM355_EVM
  81         help
  82           This driver supports the MSP430 microcontroller used on these
  83           boards.  MSP430 firmware manages resets and power sequencing,
  84           inputs from buttons and the IR remote, LEDs, an RTC, and more.
  85
  86 config MFD_TI_SSP
  87         tristate "TI Sequencer Serial Port support"
  88         depends on ARCH_DAVINCI_TNETV107X
  89         select MFD_CORE
  90         ---help---
  91           Say Y here if you want support for the Sequencer Serial Port
  92           in a Texas Instruments TNETV107X SoC.
  93
  94           To compile this driver as a module, choose M here: the
  95           module will be called ti-ssp.
  96
  97 config HTC_EGPIO
  98         bool "HTC EGPIO support"
  99         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
 100         help
 101             This driver supports the CPLD egpio chip present on
 102             several HTC phones.  It provides basic support for input
 103             pins, output pins, and irqs.
 104
 105 config HTC_PASIC3
 106         tristate "HTC PASIC3 LED/DS1WM chip support"
 107         select MFD_CORE
 108         help
 109           This core driver provides register access for the LED/DS1WM
 110           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
 111           HTC Magician devices, respectively. Actual functionality is
 112           handled by the leds-pasic3 and ds1wm drivers.
 113
 114 config HTC_I2CPLD
 115         bool "HTC I2C PLD chip support"
 116         depends on I2C=y && GPIOLIB
 117         help
 118           If you say yes here you get support for the supposed CPLD
 119           found on omap850 HTC devices like the HTC Wizard and HTC Herald.
 120           This device provides input and output GPIOs through an I2C
 121           interface to one or more sub-chips.
 122
 123 config UCB1400_CORE
 124         tristate "Philips UCB1400 Core driver"
 125         depends on AC97_BUS
 126         depends on GPIOLIB
 127         help
 128           This enables support for the Philips UCB1400 core functions.
 129           The UCB1400 is an AC97 audio codec.
 130
 131           To compile this driver as a module, choose M here: the
 132           module will be called ucb1400_core.
 133
 134 config MFD_LM3533
 135         tristate "LM3533 Lighting Power chip"
 136         depends on I2C
 137         select MFD_CORE
 138         select REGMAP_I2C
 139         help
 140           Say yes here to enable support for National Semiconductor / TI
 141           LM3533 Lighting Power chips.
 142
 143           This driver provides common support for accessing the device;
 144           additional drivers must be enabled in order to use the LED,
 145           backlight or ambient-light-sensor functionality of the device.
 146
 147 config TPS6105X
 148         tristate "TPS61050/61052 Boost Converters"
 149         depends on I2C
 150         select REGULATOR
 151         select MFD_CORE
 152         select REGULATOR_FIXED_VOLTAGE
 153         help
 154           This option enables a driver for the TP61050/TPS61052
 155           high-power "white LED driver". This boost converter is
 156           sometimes used for other things than white LEDs, and
 157           also contains a GPIO pin.
 158
 159 config TPS65010
 160         tristate "TPS6501x Power Management chips"
 161         depends on I2C && GPIOLIB
 162         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 163         help
 164           If you say yes here you get support for the TPS6501x series of
 165           Power Management chips.  These include voltage regulators,
 166           lithium ion/polymer battery charging, and other features that
 167           are often used in portable devices like cell phones and cameras.
 168
 169           This driver can also be built as a module.  If so, the module
 170           will be called tps65010.
 171
 172 config TPS6507X
 173         tristate "TPS6507x Power Management / Touch Screen chips"
 174         select MFD_CORE
 175         depends on I2C
 176         help
 177           If you say yes here you get support for the TPS6507x series of
 178           Power Management / Touch Screen chips.  These include voltage
 179           regulators, lithium ion/polymer battery charging, touch screen
 180           and other features that are often used in portable devices.
 181           This driver can also be built as a module.  If so, the module
 182           will be called tps6507x.
 183
 184 config MFD_TPS65217
 185         tristate "TPS65217 Power Management / White LED chips"
 186         depends on I2C
 187         select MFD_CORE
 188         select REGMAP_I2C
 189         help
 190           If you say yes here you get support for the TPS65217 series of
 191           Power Management / White LED chips.
 192           These include voltage regulators, lithium ion/polymer battery
 193           charger, wled and other features that are often used in portable
 194           devices.
 195
 196           This driver can also be built as a module.  If so, the module
 197           will be called tps65217.
 198
 199 config MFD_TPS6586X
 200         bool "TPS6586x Power Management chips"
 201         depends on I2C=y && GENERIC_HARDIRQS
 202         select MFD_CORE
 203         select REGMAP_I2C
 204         depends on REGULATOR
 205         help
 206           If you say yes here you get support for the TPS6586X series of
 207           Power Management chips.
 208           This driver provides common support for accessing the device,
 209           additional drivers must be enabled in order to use the
 210           functionality of the device.
 211
 212           This driver can also be built as a module.  If so, the module
 213           will be called tps6586x.
 214
 215 config MFD_TPS65910
 216         bool "TPS65910 Power Management chip"
 217         depends on I2C=y && GPIOLIB
 218         select MFD_CORE
 219         select REGMAP_I2C
 220         select IRQ_DOMAIN
 221         help
 222           if you say yes here you get support for the TPS65910 series of
 223           Power Management chips.
 224
 225 config MFD_TPS65912
 226         bool
 227         depends on GPIOLIB
 228
 229 config MFD_TPS65912_I2C
 230         bool "TPS65912 Power Management chip with I2C"
 231         select MFD_CORE
 232         select MFD_TPS65912
 233         depends on I2C=y && GPIOLIB
 234         help
 235           If you say yes here you get support for the TPS65912 series of
 236           PM chips with I2C interface.
 237
 238 config MFD_TPS65912_SPI
 239         bool "TPS65912 Power Management chip with SPI"
 240         select MFD_CORE
 241         select MFD_TPS65912
 242         depends on SPI_MASTER && GPIOLIB
 243         help
 244           If you say yes here you get support for the TPS65912 series of
 245           PM chips with SPI interface.
 246
 247 config MENELAUS
 248         bool "Texas Instruments TWL92330/Menelaus PM chip"
 249         depends on I2C=y && ARCH_OMAP2
 250         help
 251           If you say yes here you get support for the Texas Instruments
 252           TWL92330/Menelaus Power Management chip. This include voltage
 253           regulators, Dual slot memory card transceivers, real-time clock
 254           and other features that are often used in portable devices like
 255           cell phones and PDAs.
 256
 257 config TWL4030_CORE
 258         bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
 259         depends on I2C=y && GENERIC_HARDIRQS
 260         select IRQ_DOMAIN
 261         help
 262           Say yes here if you have TWL4030 / TWL6030 family chip on your board.
 263           This core driver provides register access and IRQ handling
 264           facilities, and registers devices for the various functions
 265           so that function-specific drivers can bind to them.
 266
 267           These multi-function chips are found on many OMAP2 and OMAP3
 268           boards, providing power management, RTC, GPIO, keypad, a
 269           high speed USB OTG transceiver, an audio codec (on most
 270           versions) and many other features.
 271
 272 config TWL4030_MADC
 273         tristate "Texas Instruments TWL4030 MADC"
 274         depends on TWL4030_CORE
 275         help
 276         This driver provides support for triton TWL4030-MADC. The
 277         driver supports both RT and SW conversion methods.
 278
 279         This driver can be built as a module. If so it will be
 280         named twl4030-madc
 281
 282 config TWL4030_POWER
 283         bool "Support power resources on TWL4030 family chips"
 284         depends on TWL4030_CORE && ARM
 285         help
 286           Say yes here if you want to use the power resources on the
 287           TWL4030 family chips.  Most of these resources are regulators,
 288           which have a separate driver; some are control signals, such
 289           as clock request handshaking.
 290
 291           This driver uses board-specific data to initialize the resources
 292           and load scripts controlling which resources are switched off/on
 293           or reset when a sleep, wakeup or warm reset event occurs.
 294
 295 config MFD_TWL4030_AUDIO
 296         bool
 297         depends on TWL4030_CORE
 298         select MFD_CORE
 299         default n
 300
 301 config TWL6040_CORE
 302         bool "Support for TWL6040 audio codec"
 303         depends on I2C=y && GENERIC_HARDIRQS
 304         select MFD_CORE
 305         select REGMAP_I2C
 306         select IRQ_DOMAIN
 307         default n
 308         help
 309           Say yes here if you want support for Texas Instruments TWL6040 audio
 310           codec.
 311           This driver provides common support for accessing the device,
 312           additional drivers must be enabled in order to use the
 313           functionality of the device (audio, vibra).
 314
 315 config MFD_STMPE
 316         bool "Support STMicroelectronics STMPE"
 317         depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
 318         select MFD_CORE
 319         help
 320           Support for the STMPE family of I/O Expanders from
 321           STMicroelectronics.
 322
 323           Currently supported devices are:
 324
 325                 STMPE811: GPIO, Touchscreen
 326                 STMPE1601: GPIO, Keypad
 327                 STMPE2401: GPIO, Keypad
 328                 STMPE2403: GPIO, Keypad
 329
 330           This driver provides common support for accessing the device,
 331           additional drivers must be enabled in order to use the functionality
 332           of the device.  Currently available sub drivers are:
 333
 334                 GPIO: stmpe-gpio
 335                 Keypad: stmpe-keypad
 336                 Touchscreen: stmpe-ts
 337
 338 menu "STMPE Interface Drivers"
 339 depends on MFD_STMPE
 340
 341 config STMPE_I2C
 342         bool "STMPE I2C Inteface"
 343         depends on I2C=y
 344         default y
 345         help
 346           This is used to enable I2C interface of STMPE
 347
 348 config STMPE_SPI
 349         bool "STMPE SPI Inteface"
 350         depends on SPI_MASTER
 351         help
 352           This is used to enable SPI interface of STMPE
 353 endmenu
 354
 355 config MFD_TC3589X
 356         bool "Support Toshiba TC35892 and variants"
 357         depends on I2C=y && GENERIC_HARDIRQS
 358         select MFD_CORE
 359         help
 360           Support for the Toshiba TC35892 and variants I/O Expander.
 361
 362           This driver provides common support for accessing the device,
 363           additional drivers must be enabled in order to use the
 364           functionality of the device.
 365
 366 config MFD_TMIO
 367         bool
 368         default n
 369
 370 config MFD_T7L66XB
 371         bool "Support Toshiba T7L66XB"
 372         depends on ARM && HAVE_CLK
 373         select MFD_CORE
 374         select MFD_TMIO
 375         help
 376           Support for Toshiba Mobile IO Controller T7L66XB
 377
 378 config MFD_TC6387XB
 379         bool "Support Toshiba TC6387XB"
 380         depends on ARM && HAVE_CLK
 381         select MFD_CORE
 382         select MFD_TMIO
 383         help
 384           Support for Toshiba Mobile IO Controller TC6387XB
 385
 386 config MFD_TC6393XB
 387         bool "Support Toshiba TC6393XB"
 388         depends on GPIOLIB && ARM && HAVE_CLK
 389         select MFD_CORE
 390         select MFD_TMIO
 391         help
 392           Support for Toshiba Mobile IO Controller TC6393XB
 393
 394 config PMIC_DA903X
 395         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 396         depends on I2C=y
 397         help
 398           Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
 399           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 400           usually found on PXA processors-based platforms. This includes
 401           the I2C driver and the core APIs _only_, you have to select
 402           individual components like LCD backlight, voltage regulators,
 403           LEDs and battery-charger under the corresponding menus.
 404
 405 config PMIC_DA9052
 406         bool
 407         select MFD_CORE
 408
 409 config MFD_DA9052_SPI
 410         bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
 411         select REGMAP_SPI
 412         select REGMAP_IRQ
 413         select PMIC_DA9052
 414         depends on SPI_MASTER=y
 415         help
 416           Support for the Dialog Semiconductor DA9052 PMIC
 417           when controlled using SPI. This driver provides common support
 418           for accessing the device, additional drivers must be enabled in
 419           order to use the functionality of the device.
 420
 421 config MFD_DA9052_I2C
 422         bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
 423         select REGMAP_I2C
 424         select REGMAP_IRQ
 425         select PMIC_DA9052
 426         depends on I2C=y
 427         help
 428           Support for the Dialog Semiconductor DA9052 PMIC
 429           when controlled using I2C. This driver provides common support
 430           for accessing the device, additional drivers must be enabled in
 431           order to use the functionality of the device.
 432
 433 config PMIC_ADP5520
 434         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
 435         depends on I2C=y
 436         help
 437           Say yes here to add support for Analog Devices AD5520 and ADP5501,
 438           Multifunction Power Management IC. This includes
 439           the I2C driver and the core APIs _only_, you have to select
 440           individual components like LCD backlight, LEDs, GPIOs and Kepad
 441           under the corresponding menus.
 442
 443 config MFD_LP8788
 444         bool "Texas Instruments LP8788 Power Management Unit Driver"
 445         depends on I2C=y
 446         select MFD_CORE
 447         select REGMAP_I2C
 448         select IRQ_DOMAIN
 449         help
 450           TI LP8788 PMU supports regulators, battery charger, RTC,
 451           ADC, backlight driver and current sinks.
 452
 453 config MFD_MAX77686
 454         bool "Maxim Semiconductor MAX77686 PMIC Support"
 455         depends on I2C=y && GENERIC_HARDIRQS
 456         select MFD_CORE
 457         select REGMAP_I2C
 458         select IRQ_DOMAIN
 459         help
 460           Say yes here to support for Maxim Semiconductor MAX77686.
 461           This is a Power Management IC with RTC on chip.
 462           This driver provides common support for accessing the device;
 463           additional drivers must be enabled in order to use the functionality
 464           of the device.
 465
 466 config MFD_MAX77693
 467         bool "Maxim Semiconductor MAX77693 PMIC Support"
 468         depends on I2C=y && GENERIC_HARDIRQS
 469         select MFD_CORE
 470         select REGMAP_I2C
 471         help
 472           Say yes here to support for Maxim Semiconductor MAX77693.
 473           This is a companion Power Management IC with Flash, Haptic, Charger,
 474           and MUIC(Micro USB Interface Controller) controls on chip.
 475           This driver provides common support for accessing the device;
 476           additional drivers must be enabled in order to use the functionality
 477           of the device.
 478
 479 config MFD_MAX8907
 480         tristate "Maxim Semiconductor MAX8907 PMIC Support"
 481         select MFD_CORE
 482         depends on I2C=y && GENERIC_HARDIRQS
 483         select REGMAP_I2C
 484         select REGMAP_IRQ
 485         help
 486           Say yes here to support for Maxim Semiconductor MAX8907. This is
 487           a Power Management IC. This driver provides common support for
 488           accessing the device; additional drivers must be enabled in order
 489           to use the functionality of the device.
 490
 491 config MFD_MAX8925
 492         bool "Maxim Semiconductor MAX8925 PMIC Support"
 493         depends on I2C=y && GENERIC_HARDIRQS
 494         select MFD_CORE
 495         help
 496           Say yes here to support for Maxim Semiconductor MAX8925. This is
 497           a Power Management IC. This driver provides common support for
 498           accessing the device, additional drivers must be enabled in order
 499           to use the functionality of the device.
 500
 501 config MFD_MAX8997
 502         bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
 503         depends on I2C=y && GENERIC_HARDIRQS
 504         select MFD_CORE
 505         select IRQ_DOMAIN
 506         help
 507           Say yes here to support for Maxim Semiconductor MAX8997/8966.
 508           This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 509           MUIC controls on chip.
 510           This driver provides common support for accessing the device;
 511           additional drivers must be enabled in order to use the functionality
 512           of the device.
 513
 514 config MFD_MAX8998
 515         bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
 516         depends on I2C=y && GENERIC_HARDIRQS
 517         select MFD_CORE
 518         help
 519           Say yes here to support for Maxim Semiconductor MAX8998 and
 520           National Semiconductor LP3974. This is a Power Management IC.
 521           This driver provides common support for accessing the device,
 522           additional drivers must be enabled in order to use the functionality
 523           of the device.
 524
 525 config MFD_SEC_CORE
 526         bool "SAMSUNG Electronics PMIC Series Support"
 527         depends on I2C=y && GENERIC_HARDIRQS
 528         select MFD_CORE
 529         select REGMAP_I2C
 530         select REGMAP_IRQ
 531         help
 532          Support for the Samsung Electronics MFD series.
 533          This driver provides common support for accessing the device,
 534          additional drivers must be enabled in order to use the functionality
 535          of the device
 536
 537 config MFD_ARIZONA
 538         select REGMAP
 539         select REGMAP_IRQ
 540         select MFD_CORE
 541         bool
 542
 543 config MFD_ARIZONA_I2C
 544         tristate "Support Wolfson Microelectronics Arizona platform with I2C"
 545         select MFD_ARIZONA
 546         select MFD_CORE
 547         select REGMAP_I2C
 548         depends on I2C
 549         help
 550           Support for the Wolfson Microelectronics Arizona platform audio SoC
 551           core functionality controlled via I2C.
 552
 553 config MFD_ARIZONA_SPI
 554         tristate "Support Wolfson Microelectronics Arizona platform with SPI"
 555         select MFD_ARIZONA
 556         select MFD_CORE
 557         select REGMAP_SPI
 558         depends on SPI_MASTER
 559         help
 560           Support for the Wolfson Microelectronics Arizona platform audio SoC
 561           core functionality controlled via I2C.
 562
 563 config MFD_WM5102
 564         bool "Support Wolfson Microelectronics WM5102"
 565         depends on MFD_ARIZONA
 566         help
 567           Support for Wolfson Microelectronics WM5102 low power audio SoC
 568
 569 config MFD_WM5110
 570         bool "Support Wolfson Microelectronics WM5110"
 571         depends on MFD_ARIZONA
 572         help
 573           Support for Wolfson Microelectronics WM5110 low power audio SoC
 574
 575 config MFD_WM8400
 576         bool "Support Wolfson Microelectronics WM8400"
 577         select MFD_CORE
 578         depends on I2C=y
 579         select REGMAP_I2C
 580         help
 581           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 582           CODEC.  This driver provides common support for accessing
 583           the device, additional drivers must be enabled in order to use
 584           the functionality of the device.
 585
 586 config MFD_WM831X
 587         bool
 588         depends on GENERIC_HARDIRQS
 589
 590 config MFD_WM831X_I2C
 591         bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
 592         select MFD_CORE
 593         select MFD_WM831X
 594         select REGMAP_I2C
 595         select IRQ_DOMAIN
 596         depends on I2C=y && GENERIC_HARDIRQS
 597         help
 598           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 599           when controlled using I2C.  This driver provides common support
 600           for accessing the device, additional drivers must be enabled in
 601           order to use the functionality of the device.
 602
 603 config MFD_WM831X_SPI
 604         bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
 605         select MFD_CORE
 606         select MFD_WM831X
 607         select REGMAP_SPI
 608         select IRQ_DOMAIN
 609         depends on SPI_MASTER && GENERIC_HARDIRQS
 610         help
 611           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 612           when controlled using SPI.  This driver provides common support
 613           for accessing the device, additional drivers must be enabled in
 614           order to use the functionality of the device.
 615
 616 config MFD_WM8350
 617         bool
 618         depends on GENERIC_HARDIRQS
 619
 620 config MFD_WM8350_CONFIG_MODE_0
 621         bool
 622         depends on MFD_WM8350
 623
 624 config MFD_WM8350_CONFIG_MODE_1
 625         bool
 626         depends on MFD_WM8350
 627
 628 config MFD_WM8350_CONFIG_MODE_2
 629         bool
 630         depends on MFD_WM8350
 631
 632 config MFD_WM8350_CONFIG_MODE_3
 633         bool
 634         depends on MFD_WM8350
 635
 636 config MFD_WM8351_CONFIG_MODE_0
 637         bool
 638         depends on MFD_WM8350
 639
 640 config MFD_WM8351_CONFIG_MODE_1
 641         bool
 642         depends on MFD_WM8350
 643
 644 config MFD_WM8351_CONFIG_MODE_2
 645         bool
 646         depends on MFD_WM8350
 647
 648 config MFD_WM8351_CONFIG_MODE_3
 649         bool
 650         depends on MFD_WM8350
 651
 652 config MFD_WM8352_CONFIG_MODE_0
 653         bool
 654         depends on MFD_WM8350
 655
 656 config MFD_WM8352_CONFIG_MODE_1
 657         bool
 658         depends on MFD_WM8350
 659
 660 config MFD_WM8352_CONFIG_MODE_2
 661         bool
 662         depends on MFD_WM8350
 663
 664 config MFD_WM8352_CONFIG_MODE_3
 665         bool
 666         depends on MFD_WM8350
 667
 668 config MFD_WM8350_I2C
 669         bool "Support Wolfson Microelectronics WM8350 with I2C"
 670         select MFD_WM8350
 671         depends on I2C=y && GENERIC_HARDIRQS
 672         help
 673           The WM8350 is an integrated audio and power management
 674           subsystem with watchdog and RTC functionality for embedded
 675           systems.  This option enables core support for the WM8350 with
 676           I2C as the control interface.  Additional options must be
 677           selected to enable support for the functionality of the chip.
 678
 679 config MFD_WM8994
 680         bool "Support Wolfson Microelectronics WM8994"
 681         select MFD_CORE
 682         select REGMAP_I2C
 683         select REGMAP_IRQ
 684         depends on I2C=y && GENERIC_HARDIRQS
 685         help
 686           The WM8994 is a highly integrated hi-fi CODEC designed for
 687           smartphone applicatiosn.  As well as audio functionality it
 688           has on board GPIO and regulator functionality which is
 689           supported via the relevant subsystems.  This driver provides
 690           core support for the WM8994, in order to use the actual
 691           functionaltiy of the device other drivers must be enabled.
 692
 693 config MFD_PCF50633
 694         tristate "Support for NXP PCF50633"
 695         depends on I2C
 696         select REGMAP_I2C
 697         help
 698           Say yes here if you have NXP PCF50633 chip on your board.
 699           This core driver provides register access and IRQ handling
 700           facilities, and registers devices for the various functions
 701           so that function-specific drivers can bind to them.
 702
 703 config PCF50633_ADC
 704         tristate "Support for NXP PCF50633 ADC"
 705         depends on MFD_PCF50633
 706         help
 707          Say yes here if you want to include support for ADC in the
 708          NXP PCF50633 chip.
 709
 710 config PCF50633_GPIO
 711         tristate "Support for NXP PCF50633 GPIO"
 712         depends on MFD_PCF50633
 713         help
 714          Say yes here if you want to include support GPIO for pins on
 715          the PCF50633 chip.
 716
 717 config MFD_MC13783
 718         tristate
 719
 720 config MFD_MC13XXX
 721         tristate
 722         depends on SPI_MASTER || I2C
 723         select MFD_CORE
 724         select MFD_MC13783
 725         help
 726           Enable support for the Freescale MC13783 and MC13892 PMICs.
 727           This driver provides common support for accessing the device,
 728           additional drivers must be enabled in order to use the
 729           functionality of the device.
 730
 731 config MFD_MC13XXX_SPI
 732         tristate "Freescale MC13783 and MC13892 SPI interface"
 733         depends on SPI_MASTER
 734         select REGMAP_SPI
 735         select MFD_MC13XXX
 736         help
 737           Select this if your MC13xxx is connected via an SPI bus.
 738
 739 config MFD_MC13XXX_I2C
 740         tristate "Freescale MC13892 I2C interface"
 741         depends on I2C
 742         select REGMAP_I2C
 743         select MFD_MC13XXX
 744         help
 745           Select this if your MC13xxx is connected via an I2C bus.
 746
 747 config ABX500_CORE
 748         bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 749         default y if ARCH_U300 || ARCH_U8500
 750         help
 751           Say yes here if you have the ABX500 Mixed Signal IC family
 752           chips. This core driver expose register access functions.
 753           Functionality specific drivers using these functions can
 754           remain unchanged when IC changes. Binding of the functions to
 755           actual register access is done by the IC core driver.
 756
 757 config AB3100_CORE
 758         bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 759         depends on I2C=y && ABX500_CORE
 760         select MFD_CORE
 761         default y if ARCH_U300
 762         help
 763           Select this to enable the AB3100 Mixed Signal IC core
 764           functionality. This connects to a AB3100 on the I2C bus
 765           and expose a number of symbols needed for dependent devices
 766           to read and write registers and subscribe to events from
 767           this multi-functional IC. This is needed to use other features
 768           of the AB3100 such as battery-backed RTC, charging control,
 769           LEDs, vibrator, system power and temperature, power management
 770           and ALSA sound.
 771
 772 config AB3100_OTP
 773         tristate "ST-Ericsson AB3100 OTP functions"
 774         depends on AB3100_CORE
 775         default y if AB3100_CORE
 776         help
 777           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 778           programmable memory) support. This exposes a sysfs file to read
 779           out OTP values.
 780
 781 config EZX_PCAP
 782         bool "PCAP Support"
 783         depends on GENERIC_HARDIRQS && SPI_MASTER
 784         help
 785           This enables the PCAP ASIC present on EZX Phones. This is
 786           needed for MMC, TouchScreen, Sound, USB, etc..
 787
 788 config AB8500_CORE
 789         bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 790         depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
 791         select MFD_CORE
 792         select IRQ_DOMAIN
 793         help
 794           Select this option to enable access to AB8500 power management
 795           chip. This connects to U8500 either on the SSP/SPI bus (deprecated
 796           since hardware version v1.0) or the I2C bus via PRCMU. It also adds
 797           the irq_chip parts for handling the Mixed Signal chip events.
 798           This chip embeds various other multimedia funtionalities as well.
 799
 800 config AB8500_DEBUG
 801        bool "Enable debug info via debugfs"
 802        depends on AB8500_CORE && DEBUG_FS
 803        default y if DEBUG_FS
 804        help
 805          Select this option if you want debug information using the debug
 806          filesystem, debugfs.
 807
 808 config AB8500_GPADC
 809         bool "AB8500 GPADC driver"
 810         depends on AB8500_CORE && REGULATOR_AB8500
 811         default y
 812         help
 813           AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
 814
 815 config MFD_DB8500_PRCMU
 816         bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 817         depends on UX500_SOC_DB8500
 818         select MFD_CORE
 819         help
 820           Select this option to enable support for the DB8500 Power Reset
 821           and Control Management Unit. This is basically an autonomous
 822           system controller running an XP70 microprocessor, which is accessed
 823           through a register map.
 824
 825 config MFD_CS5535
 826         tristate "Support for CS5535 and CS5536 southbridge core functions"
 827         select MFD_CORE
 828         depends on PCI && X86
 829         ---help---
 830           This is the core driver for CS5535/CS5536 MFD functions.  This is
 831           necessary for using the board's GPIO and MFGPT functionality.
 832
 833 config MFD_TIMBERDALE
 834         tristate "Support for the Timberdale FPGA"
 835         select MFD_CORE
 836         depends on PCI && GPIOLIB
 837         ---help---
 838         This is the core driver for the timberdale FPGA. This device is a
 839         multifunction device which exposes numerous platform devices.
 840
 841         The timberdale FPGA can be found on the Intel Atom development board
 842         for in-vehicle infontainment, called Russellville.
 843
 844 config LPC_SCH
 845         tristate "Intel SCH LPC"
 846         depends on PCI
 847         select MFD_CORE
 848         help
 849           LPC bridge function of the Intel SCH provides support for
 850           System Management Bus and General Purpose I/O.
 851
 852 config LPC_ICH
 853         tristate "Intel ICH LPC"
 854         depends on PCI
 855         select MFD_CORE
 856         help
 857           The LPC bridge function of the Intel ICH provides support for
 858           many functional units. This driver provides needed support for
 859           other drivers to control these functions, currently GPIO and
 860           watchdog.
 861
 862 config MFD_RDC321X
 863         tristate "Support for RDC-R321x southbridge"
 864         select MFD_CORE
 865         depends on PCI
 866         help
 867           Say yes here if you want to have support for the RDC R-321x SoC
 868           southbridge which provides access to GPIOs and Watchdog using the
 869           southbridge PCI device configuration space.
 870
 871 config MFD_JANZ_CMODIO
 872         tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
 873         select MFD_CORE
 874         depends on PCI
 875         help
 876           This is the core driver for the Janz CMOD-IO PCI MODULbus
 877           carrier board. This device is a PCI to MODULbus bridge which may
 878           host many different types of MODULbus daughterboards, including
 879           CAN and GPIO controllers.
 880
 881 config MFD_JZ4740_ADC
 882         bool "Support for the JZ4740 SoC ADC core"
 883         select MFD_CORE
 884         select GENERIC_IRQ_CHIP
 885         depends on MACH_JZ4740
 886         help
 887           Say yes here if you want support for the ADC unit in the JZ4740 SoC.
 888           This driver is necessary for jz4740-battery and jz4740-hwmon driver.
 889
 890 config MFD_VX855
 891         tristate "Support for VIA VX855/VX875 integrated south bridge"
 892         depends on PCI
 893         select MFD_CORE
 894         help
 895           Say yes here to enable support for various functions of the
 896           VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
 897           and/or vx855_gpio drivers for this to do anything useful.
 898
 899 config MFD_WL1273_CORE
 900         tristate "Support for TI WL1273 FM radio."
 901         depends on I2C
 902         select MFD_CORE
 903         default n
 904         help
 905           This is the core driver for the TI WL1273 FM radio. This MFD
 906           driver connects the radio-wl1273 V4L2 module and the wl1273
 907           audio codec.
 908
 909 config MFD_OMAP_USB_HOST
 910         bool "Support OMAP USBHS core and TLL driver"
 911         depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
 912         default y
 913         help
 914           This is the core driver for the OAMP EHCI and OHCI drivers.
 915           This MFD driver does the required setup functionalities for
 916           OMAP USB Host drivers.
 917
 918 config MFD_PM8XXX
 919         tristate
 920
 921 config MFD_PM8921_CORE
 922         tristate "Qualcomm PM8921 PMIC chip"
 923         depends on MSM_SSBI
 924         select MFD_CORE
 925         select MFD_PM8XXX
 926         help
 927           If you say yes to this option, support will be included for the
 928           built-in PM8921 PMIC chip.
 929
 930           This is required if your board has a PM8921 and uses its features,
 931           such as: MPPs, GPIOs, regulators, interrupts, and PWM.
 932
 933           Say M here if you want to include support for PM8921 chip as a module.
 934           This will build a module called "pm8921-core".
 935
 936 config MFD_PM8XXX_IRQ
 937         bool "Support for Qualcomm PM8xxx IRQ features"
 938         depends on MFD_PM8XXX
 939         default y if MFD_PM8XXX
 940         help
 941           This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
 942
 943           This is required to use certain other PM 8xxx features, such as GPIO
 944           and MPP.
 945
 946 config TPS65911_COMPARATOR
 947         tristate
 948
 949 config MFD_TPS65090
 950         bool "TPS65090 Power Management chips"
 951         depends on I2C=y && GENERIC_HARDIRQS
 952         select MFD_CORE
 953         select REGMAP_I2C
 954         help
 955           If you say yes here you get support for the TPS65090 series of
 956           Power Management chips.
 957           This driver provides common support for accessing the device,
 958           additional drivers must be enabled in order to use the
 959           functionality of the device.
 960
 961 config MFD_AAT2870_CORE
 962         bool "Support for the AnalogicTech AAT2870"
 963         select MFD_CORE
 964         depends on I2C=y && GPIOLIB
 965         help
 966           If you say yes here you get support for the AAT2870.
 967           This driver provides common support for accessing the device,
 968           additional drivers must be enabled in order to use the
 969           functionality of the device.
 970
 971 config MFD_INTEL_MSIC
 972         bool "Support for Intel MSIC"
 973         depends on INTEL_SCU_IPC
 974         select MFD_CORE
 975         help
 976           Select this option to enable access to Intel MSIC (Avatele
 977           Passage) chip. This chip embeds audio, battery, GPIO, etc.
 978           devices used in Intel Medfield platforms.
 979
 980 config MFD_RC5T583
 981         bool "Ricoh RC5T583 Power Management system device"
 982         depends on I2C=y && GENERIC_HARDIRQS
 983         select MFD_CORE
 984         select REGMAP_I2C
 985         help
 986           Select this option to get support for the RICOH583 Power
 987           Management system device.
 988           This driver provides common support for accessing the device
 989           through i2c interface. The device supports multiple sub-devices
 990           like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
 991           Additional drivers must be enabled in order to use the
 992           different functionality of the device.
 993
 994 config MFD_STA2X11
 995         bool "STA2X11 multi function device support"
 996         depends on STA2X11
 997         select MFD_CORE
 998
 999 config MFD_SYSCON
1000         bool "System Controller Register R/W Based on Regmap"
1001         depends on OF
1002         select REGMAP_MMIO
1003         help
1004           Select this option to enable accessing system control registers
1005           via regmap.
1006
1007 config MFD_PALMAS
1008         bool "Support for the TI Palmas series chips"
1009         select MFD_CORE
1010         select REGMAP_I2C
1011         select REGMAP_IRQ
1012         depends on I2C=y
1013         help
1014           If you say yes here you get support for the Palmas
1015           series of PMIC chips from Texas Instruments.
1016
1017 endmenu
1018 endif
1019
1020 menu "Multimedia Capabilities Port drivers"
1021         depends on ARCH_SA1100
1022
1023 config MCP
1024         tristate
1025
1026 # Interface drivers
1027 config MCP_SA11X0
1028         tristate "Support SA11x0 MCP interface"
1029         depends on ARCH_SA1100
1030         select MCP
1031
1032 # Chip drivers
1033 config MCP_UCB1200
1034         bool "Support for UCB1200 / UCB1300"
1035         depends on MCP_SA11X0
1036         select MCP
1037
1038 config MCP_UCB1200_TS
1039         tristate "Touchscreen interface support"
1040         depends on MCP_UCB1200 && INPUT
1041
1042 endmenu