2 * Maxim MAX77620 MFD Driver
4 * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
7 * Laxman Dewangan <ldewangan@nvidia.com>
8 * Chaitanya Bandi <bandik@nvidia.com>
9 * Mallikarjun Kasoju <mkasoju@nvidia.com>
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 /****************** Teminology used in driver ********************
17 * Here are some terminology used from datasheet for quick reference:
18 * Flexible Power Sequence (FPS):
19 * The Flexible Power Sequencer (FPS) allows each regulator to power up under
20 * hardware or software control. Additionally, each regulator can power on
21 * independently or among a group of other regulators with an adjustable
22 * power-up and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can
23 * be programmed to be part of a sequence allowing external regulators to be
24 * sequenced along with internal regulators. 32KHz clock can be programmed to
25 * be part of a sequence.
26 * There is 3 FPS confguration registers and all resources are configured to
27 * any of these FPS or no FPS.
30 #include <linux/i2c.h>
31 #include <linux/interrupt.h>
32 #include <linux/mfd/core.h>
33 #include <linux/mfd/max77620.h>
34 #include <linux/init.h>
36 #include <linux/of_device.h>
37 #include <linux/regmap.h>
38 #include <linux/slab.h>
40 static const struct resource gpio_resources
[] = {
41 DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO
),
44 static const struct resource power_resources
[] = {
45 DEFINE_RES_IRQ(MAX77620_IRQ_LBT_MBATLOW
),
48 static const struct resource rtc_resources
[] = {
49 DEFINE_RES_IRQ(MAX77620_IRQ_TOP_RTC
),
52 static const struct resource thermal_resources
[] = {
53 DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM1
),
54 DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM2
),
57 static const struct regmap_irq max77620_top_irqs
[] = {
58 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GLBL
, 0, MAX77620_IRQ_TOP_GLBL_MASK
),
59 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_SD
, 0, MAX77620_IRQ_TOP_SD_MASK
),
60 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_LDO
, 0, MAX77620_IRQ_TOP_LDO_MASK
),
61 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GPIO
, 0, MAX77620_IRQ_TOP_GPIO_MASK
),
62 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_RTC
, 0, MAX77620_IRQ_TOP_RTC_MASK
),
63 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_32K
, 0, MAX77620_IRQ_TOP_32K_MASK
),
64 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_ONOFF
, 0, MAX77620_IRQ_TOP_ONOFF_MASK
),
65 REGMAP_IRQ_REG(MAX77620_IRQ_LBT_MBATLOW
, 1, MAX77620_IRQ_LBM_MASK
),
66 REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM1
, 1, MAX77620_IRQ_TJALRM1_MASK
),
67 REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM2
, 1, MAX77620_IRQ_TJALRM2_MASK
),
70 static const struct mfd_cell max77620_children
[] = {
71 { .name
= "max77620-pinctrl", },
72 { .name
= "max77620-clock", },
73 { .name
= "max77620-pmic", },
74 { .name
= "max77620-watchdog", },
76 .name
= "max77620-gpio",
77 .resources
= gpio_resources
,
78 .num_resources
= ARRAY_SIZE(gpio_resources
),
80 .name
= "max77620-rtc",
81 .resources
= rtc_resources
,
82 .num_resources
= ARRAY_SIZE(rtc_resources
),
84 .name
= "max77620-power",
85 .resources
= power_resources
,
86 .num_resources
= ARRAY_SIZE(power_resources
),
88 .name
= "max77620-thermal",
89 .resources
= thermal_resources
,
90 .num_resources
= ARRAY_SIZE(thermal_resources
),
94 static const struct mfd_cell max20024_children
[] = {
95 { .name
= "max20024-pinctrl", },
96 { .name
= "max77620-clock", },
97 { .name
= "max20024-pmic", },
98 { .name
= "max77620-watchdog", },
100 .name
= "max77620-gpio",
101 .resources
= gpio_resources
,
102 .num_resources
= ARRAY_SIZE(gpio_resources
),
104 .name
= "max77620-rtc",
105 .resources
= rtc_resources
,
106 .num_resources
= ARRAY_SIZE(rtc_resources
),
108 .name
= "max20024-power",
109 .resources
= power_resources
,
110 .num_resources
= ARRAY_SIZE(power_resources
),
114 static const struct regmap_range max77620_readable_ranges
[] = {
115 regmap_reg_range(MAX77620_REG_CNFGGLBL1
, MAX77620_REG_DVSSD4
),
118 static const struct regmap_access_table max77620_readable_table
= {
119 .yes_ranges
= max77620_readable_ranges
,
120 .n_yes_ranges
= ARRAY_SIZE(max77620_readable_ranges
),
123 static const struct regmap_range max20024_readable_ranges
[] = {
124 regmap_reg_range(MAX77620_REG_CNFGGLBL1
, MAX77620_REG_DVSSD4
),
125 regmap_reg_range(MAX20024_REG_MAX_ADD
, MAX20024_REG_MAX_ADD
),
128 static const struct regmap_access_table max20024_readable_table
= {
129 .yes_ranges
= max20024_readable_ranges
,
130 .n_yes_ranges
= ARRAY_SIZE(max20024_readable_ranges
),
133 static const struct regmap_range max77620_writable_ranges
[] = {
134 regmap_reg_range(MAX77620_REG_CNFGGLBL1
, MAX77620_REG_DVSSD4
),
137 static const struct regmap_access_table max77620_writable_table
= {
138 .yes_ranges
= max77620_writable_ranges
,
139 .n_yes_ranges
= ARRAY_SIZE(max77620_writable_ranges
),
142 static const struct regmap_range max77620_cacheable_ranges
[] = {
143 regmap_reg_range(MAX77620_REG_SD0_CFG
, MAX77620_REG_LDO_CFG3
),
144 regmap_reg_range(MAX77620_REG_FPS_CFG0
, MAX77620_REG_FPS_SD3
),
147 static const struct regmap_access_table max77620_volatile_table
= {
148 .no_ranges
= max77620_cacheable_ranges
,
149 .n_no_ranges
= ARRAY_SIZE(max77620_cacheable_ranges
),
152 static const struct regmap_config max77620_regmap_config
= {
153 .name
= "power-slave",
156 .max_register
= MAX77620_REG_DVSSD4
+ 1,
157 .cache_type
= REGCACHE_RBTREE
,
158 .rd_table
= &max77620_readable_table
,
159 .wr_table
= &max77620_writable_table
,
160 .volatile_table
= &max77620_volatile_table
,
163 static const struct regmap_config max20024_regmap_config
= {
164 .name
= "power-slave",
167 .max_register
= MAX20024_REG_MAX_ADD
+ 1,
168 .cache_type
= REGCACHE_RBTREE
,
169 .rd_table
= &max20024_readable_table
,
170 .wr_table
= &max77620_writable_table
,
171 .volatile_table
= &max77620_volatile_table
,
175 * MAX77620 and MAX20024 has the following steps of the interrupt handling
176 * for TOP interrupts:
177 * 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM.
178 * 2. Read IRQTOP and service the interrupt.
179 * 3. Once all interrupts has been checked and serviced, the interrupt service
180 * routine un-masks the hardware interrupt line by clearing GLBLM.
182 static int max77620_irq_global_mask(void *irq_drv_data
)
184 struct max77620_chip
*chip
= irq_drv_data
;
187 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_INTENLBT
,
188 MAX77620_GLBLM_MASK
, MAX77620_GLBLM_MASK
);
190 dev_err(chip
->dev
, "Failed to set GLBLM: %d\n", ret
);
195 static int max77620_irq_global_unmask(void *irq_drv_data
)
197 struct max77620_chip
*chip
= irq_drv_data
;
200 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_INTENLBT
,
201 MAX77620_GLBLM_MASK
, 0);
203 dev_err(chip
->dev
, "Failed to reset GLBLM: %d\n", ret
);
208 static struct regmap_irq_chip max77620_top_irq_chip
= {
209 .name
= "max77620-top",
210 .irqs
= max77620_top_irqs
,
211 .num_irqs
= ARRAY_SIZE(max77620_top_irqs
),
213 .status_base
= MAX77620_REG_IRQTOP
,
214 .mask_base
= MAX77620_REG_IRQTOPM
,
215 .handle_pre_irq
= max77620_irq_global_mask
,
216 .handle_post_irq
= max77620_irq_global_unmask
,
219 /* max77620_get_fps_period_reg_value: Get FPS bit field value from
221 * MAX77620 supports the FPS period of 40, 80, 160, 320, 540, 1280, 2560
222 * and 5120 microseconds. MAX20024 supports the FPS period of 20, 40, 80,
223 * 160, 320, 540, 1280 and 2560 microseconds.
224 * The FPS register has 3 bits field to set the FPS period as
225 * bits max77620 max20024
230 static int max77620_get_fps_period_reg_value(struct max77620_chip
*chip
,
236 switch (chip
->chip_id
) {
238 fps_min_period
= MAX20024_FPS_PERIOD_MIN_US
;
241 fps_min_period
= MAX77620_FPS_PERIOD_MIN_US
;
247 for (i
= 0; i
< 7; i
++) {
248 if (fps_min_period
>= tperiod
)
256 /* max77620_config_fps: Configure FPS configuration registers
257 * based on platform specific information.
259 static int max77620_config_fps(struct max77620_chip
*chip
,
260 struct device_node
*fps_np
)
262 struct device
*dev
= chip
->dev
;
263 unsigned int mask
= 0, config
= 0;
270 switch (chip
->chip_id
) {
272 fps_max_period
= MAX20024_FPS_PERIOD_MAX_US
;
275 fps_max_period
= MAX77620_FPS_PERIOD_MAX_US
;
281 for (fps_id
= 0; fps_id
< MAX77620_FPS_COUNT
; fps_id
++) {
282 sprintf(fps_name
, "fps%d", fps_id
);
283 if (!strcmp(fps_np
->name
, fps_name
))
287 if (fps_id
== MAX77620_FPS_COUNT
) {
288 dev_err(dev
, "FPS node name %s is not valid\n", fps_np
->name
);
292 ret
= of_property_read_u32(fps_np
, "maxim,shutdown-fps-time-period-us",
295 mask
|= MAX77620_FPS_TIME_PERIOD_MASK
;
296 chip
->shutdown_fps_period
[fps_id
] = min(param_val
,
298 tperiod
= max77620_get_fps_period_reg_value(chip
,
299 chip
->shutdown_fps_period
[fps_id
]);
300 config
|= tperiod
<< MAX77620_FPS_TIME_PERIOD_SHIFT
;
303 ret
= of_property_read_u32(fps_np
, "maxim,suspend-fps-time-period-us",
306 chip
->suspend_fps_period
[fps_id
] = min(param_val
,
309 ret
= of_property_read_u32(fps_np
, "maxim,fps-event-source",
313 dev_err(dev
, "FPS%d event-source invalid\n", fps_id
);
316 mask
|= MAX77620_FPS_EN_SRC_MASK
;
317 config
|= param_val
<< MAX77620_FPS_EN_SRC_SHIFT
;
318 if (param_val
== 2) {
319 mask
|= MAX77620_FPS_ENFPS_SW_MASK
;
320 config
|= MAX77620_FPS_ENFPS_SW
;
324 if (!chip
->sleep_enable
&& !chip
->enable_global_lpm
) {
325 ret
= of_property_read_u32(fps_np
,
326 "maxim,device-state-on-disabled-event",
330 chip
->sleep_enable
= true;
331 else if (param_val
== 1)
332 chip
->enable_global_lpm
= true;
336 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_FPS_CFG0
+ fps_id
,
339 dev_err(dev
, "Failed to update FPS CFG: %d\n", ret
);
346 static int max77620_initialise_fps(struct max77620_chip
*chip
)
348 struct device
*dev
= chip
->dev
;
349 struct device_node
*fps_np
, *fps_child
;
354 for (fps_id
= 0; fps_id
< MAX77620_FPS_COUNT
; fps_id
++) {
355 chip
->shutdown_fps_period
[fps_id
] = -1;
356 chip
->suspend_fps_period
[fps_id
] = -1;
359 fps_np
= of_get_child_by_name(dev
->of_node
, "fps");
363 for_each_child_of_node(fps_np
, fps_child
) {
364 ret
= max77620_config_fps(chip
, fps_child
);
369 config
= chip
->enable_global_lpm
? MAX77620_ONOFFCNFG2_SLP_LPM_MSK
: 0;
370 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_ONOFFCNFG2
,
371 MAX77620_ONOFFCNFG2_SLP_LPM_MSK
, config
);
373 dev_err(dev
, "Failed to update SLP_LPM: %d\n", ret
);
378 /* Enable wake on EN0 pin */
379 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_ONOFFCNFG2
,
380 MAX77620_ONOFFCNFG2_WK_EN0
,
381 MAX77620_ONOFFCNFG2_WK_EN0
);
383 dev_err(dev
, "Failed to update WK_EN0: %d\n", ret
);
387 /* For MAX20024, SLPEN will be POR reset if CLRSE is b11 */
388 if ((chip
->chip_id
== MAX20024
) && chip
->sleep_enable
) {
389 config
= MAX77620_ONOFFCNFG1_SLPEN
| MAX20024_ONOFFCNFG1_CLRSE
;
390 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_ONOFFCNFG1
,
393 dev_err(dev
, "Failed to update SLPEN: %d\n", ret
);
401 static int max77620_read_es_version(struct max77620_chip
*chip
)
408 for (i
= MAX77620_REG_CID0
; i
<= MAX77620_REG_CID5
; i
++) {
409 ret
= regmap_read(chip
->rmap
, i
, &val
);
411 dev_err(chip
->dev
, "Failed to read CID: %d\n", ret
);
414 dev_dbg(chip
->dev
, "CID%d: 0x%02x\n",
415 i
- MAX77620_REG_CID0
, val
);
416 cid_val
[i
- MAX77620_REG_CID0
] = val
;
419 /* CID4 is OTP Version and CID5 is ES version */
420 dev_info(chip
->dev
, "PMIC Version OTP:0x%02X and ES:0x%X\n",
421 cid_val
[4], MAX77620_CID5_DIDM(cid_val
[5]));
426 static int max77620_probe(struct i2c_client
*client
,
427 const struct i2c_device_id
*id
)
429 const struct regmap_config
*rmap_config
;
430 struct max77620_chip
*chip
;
431 const struct mfd_cell
*mfd_cells
;
435 chip
= devm_kzalloc(&client
->dev
, sizeof(*chip
), GFP_KERNEL
);
439 i2c_set_clientdata(client
, chip
);
440 chip
->dev
= &client
->dev
;
442 chip
->chip_irq
= client
->irq
;
443 chip
->chip_id
= (enum max77620_chip_id
)id
->driver_data
;
445 switch (chip
->chip_id
) {
447 mfd_cells
= max77620_children
;
448 n_mfd_cells
= ARRAY_SIZE(max77620_children
);
449 rmap_config
= &max77620_regmap_config
;
452 mfd_cells
= max20024_children
;
453 n_mfd_cells
= ARRAY_SIZE(max20024_children
);
454 rmap_config
= &max20024_regmap_config
;
457 dev_err(chip
->dev
, "ChipID is invalid %d\n", chip
->chip_id
);
461 chip
->rmap
= devm_regmap_init_i2c(client
, rmap_config
);
462 if (IS_ERR(chip
->rmap
)) {
463 ret
= PTR_ERR(chip
->rmap
);
464 dev_err(chip
->dev
, "Failed to initialise regmap: %d\n", ret
);
468 ret
= max77620_read_es_version(chip
);
472 max77620_top_irq_chip
.irq_drv_data
= chip
;
473 ret
= devm_regmap_add_irq_chip(chip
->dev
, chip
->rmap
, client
->irq
,
474 IRQF_ONESHOT
| IRQF_SHARED
,
475 chip
->irq_base
, &max77620_top_irq_chip
,
476 &chip
->top_irq_data
);
478 dev_err(chip
->dev
, "Failed to add regmap irq: %d\n", ret
);
482 ret
= max77620_initialise_fps(chip
);
486 ret
= devm_mfd_add_devices(chip
->dev
, PLATFORM_DEVID_NONE
,
487 mfd_cells
, n_mfd_cells
, NULL
, 0,
488 regmap_irq_get_domain(chip
->top_irq_data
));
490 dev_err(chip
->dev
, "Failed to add MFD children: %d\n", ret
);
497 #ifdef CONFIG_PM_SLEEP
498 static int max77620_set_fps_period(struct max77620_chip
*chip
,
499 int fps_id
, int time_period
)
501 int period
= max77620_get_fps_period_reg_value(chip
, time_period
);
504 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_FPS_CFG0
+ fps_id
,
505 MAX77620_FPS_TIME_PERIOD_MASK
,
506 period
<< MAX77620_FPS_TIME_PERIOD_SHIFT
);
508 dev_err(chip
->dev
, "Failed to update FPS period: %d\n", ret
);
515 static int max77620_i2c_suspend(struct device
*dev
)
517 struct max77620_chip
*chip
= dev_get_drvdata(dev
);
518 struct i2c_client
*client
= to_i2c_client(dev
);
523 for (fps
= 0; fps
< MAX77620_FPS_COUNT
; fps
++) {
524 if (chip
->suspend_fps_period
[fps
] < 0)
527 ret
= max77620_set_fps_period(chip
, fps
,
528 chip
->suspend_fps_period
[fps
]);
534 * For MAX20024: No need to configure SLPEN on suspend as
535 * it will be configured on Init.
537 if (chip
->chip_id
== MAX20024
)
540 config
= (chip
->sleep_enable
) ? MAX77620_ONOFFCNFG1_SLPEN
: 0;
541 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_ONOFFCNFG1
,
542 MAX77620_ONOFFCNFG1_SLPEN
,
545 dev_err(dev
, "Failed to configure sleep in suspend: %d\n", ret
);
550 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_ONOFFCNFG2
,
551 MAX77620_ONOFFCNFG2_WK_EN0
, 0);
553 dev_err(dev
, "Failed to configure WK_EN in suspend: %d\n", ret
);
558 disable_irq(client
->irq
);
563 static int max77620_i2c_resume(struct device
*dev
)
565 struct max77620_chip
*chip
= dev_get_drvdata(dev
);
566 struct i2c_client
*client
= to_i2c_client(dev
);
570 for (fps
= 0; fps
< MAX77620_FPS_COUNT
; fps
++) {
571 if (chip
->shutdown_fps_period
[fps
] < 0)
574 ret
= max77620_set_fps_period(chip
, fps
,
575 chip
->shutdown_fps_period
[fps
]);
581 * For MAX20024: No need to configure WKEN0 on resume as
582 * it is configured on Init.
584 if (chip
->chip_id
== MAX20024
)
588 ret
= regmap_update_bits(chip
->rmap
, MAX77620_REG_ONOFFCNFG2
,
589 MAX77620_ONOFFCNFG2_WK_EN0
,
590 MAX77620_ONOFFCNFG2_WK_EN0
);
592 dev_err(dev
, "Failed to configure WK_EN0 n resume: %d\n", ret
);
597 enable_irq(client
->irq
);
603 static const struct i2c_device_id max77620_id
[] = {
604 {"max77620", MAX77620
},
605 {"max20024", MAX20024
},
609 static const struct dev_pm_ops max77620_pm_ops
= {
610 SET_SYSTEM_SLEEP_PM_OPS(max77620_i2c_suspend
, max77620_i2c_resume
)
613 static struct i2c_driver max77620_driver
= {
616 .pm
= &max77620_pm_ops
,
618 .probe
= max77620_probe
,
619 .id_table
= max77620_id
,
621 builtin_i2c_driver(max77620_driver
);