drivers/misc/Kconfig

   1 #
   2 # Misc strange devices
   3 #
   4
   5 menu "Misc devices"
   6
   7 config SENSORS_LIS3LV02D
   8         tristate
   9         depends on INPUT
  10         select INPUT_POLLDEV
  11         default n
  12
  13 config AD525X_DPOT
  14         tristate "Analog Devices Digital Potentiometers"
  15         depends on (I2C || SPI) && SYSFS
  16         help
  17           If you say yes here, you get support for the Analog Devices
  18           AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
  19           AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
  20           AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
  21           AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
  22           AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
  23           AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
  24           ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
  25           AD5271, AD5272, AD5274
  26           digital potentiometer chips.
  27
  28           See Documentation/misc-devices/ad525x_dpot.txt for the
  29           userspace interface.
  30
  31           This driver can also be built as a module.  If so, the module
  32           will be called ad525x_dpot.
  33
  34 config AD525X_DPOT_I2C
  35         tristate "support I2C bus connection"
  36         depends on AD525X_DPOT && I2C
  37         help
  38           Say Y here if you have a digital potentiometers hooked to an I2C bus.
  39
  40           To compile this driver as a module, choose M here: the
  41           module will be called ad525x_dpot-i2c.
  42
  43 config AD525X_DPOT_SPI
  44         tristate "support SPI bus connection"
  45         depends on AD525X_DPOT && SPI_MASTER
  46         help
  47           Say Y here if you have a digital potentiometers hooked to an SPI bus.
  48
  49           If unsure, say N (but it's safe to say "Y").
  50
  51           To compile this driver as a module, choose M here: the
  52           module will be called ad525x_dpot-spi.
  53
  54 config ATMEL_TCLIB
  55         bool "Atmel AT32/AT91 Timer/Counter Library"
  56         depends on (AVR32 || ARCH_AT91)
  57         help
  58           Select this if you want a library to allocate the Timer/Counter
  59           blocks found on many Atmel processors.  This facilitates using
  60           these blocks by different drivers despite processor differences.
  61
  62 config ATMEL_TCB_CLKSRC
  63         bool "TC Block Clocksource"
  64         depends on ATMEL_TCLIB
  65         default y
  66         help
  67           Select this to get a high precision clocksource based on a
  68           TC block with a 5+ MHz base clock rate.  Two timer channels
  69           are combined to make a single 32-bit timer.
  70
  71           When GENERIC_CLOCKEVENTS is defined, the third timer channel
  72           may be used as a clock event device supporting oneshot mode
  73           (delays of up to two seconds) based on the 32 KiHz clock.
  74
  75 config ATMEL_TCB_CLKSRC_BLOCK
  76         int
  77         depends on ATMEL_TCB_CLKSRC
  78         prompt "TC Block" if CPU_AT32AP700X
  79         default 0
  80         range 0 1
  81         help
  82           Some chips provide more than one TC block, so you have the
  83           choice of which one to use for the clock framework.  The other
  84           TC can be used for other purposes, such as PWM generation and
  85           interval timing.
  86
  87 config DUMMY_IRQ
  88         tristate "Dummy IRQ handler"
  89         default n
  90         ---help---
  91           This module accepts a single 'irq' parameter, which it should register for.
  92           The sole purpose of this module is to help with debugging of systems on
  93           which spurious IRQs would happen on disabled IRQ vector.
  94
  95 config IBM_ASM
  96         tristate "Device driver for IBM RSA service processor"
  97         depends on X86 && PCI && INPUT
  98         depends on SERIAL_8250 || SERIAL_8250=n
  99         ---help---
 100           This option enables device driver support for in-band access to the
 101           IBM RSA (Condor) service processor in eServer xSeries systems.
 102           The ibmasm device driver allows user space application to access
 103           ASM (Advanced Systems Management) functions on the service
 104           processor. The driver is meant to be used in conjunction with
 105           a user space API.
 106           The ibmasm driver also enables the OS to use the UART on the
 107           service processor board as a regular serial port. To make use of
 108           this feature serial driver support (CONFIG_SERIAL_8250) must be
 109           enabled.
 110
 111           WARNING: This software may not be supported or function
 112           correctly on your IBM server. Please consult the IBM ServerProven
 113           website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
 114           for information on the specific driver level and support statement
 115           for your IBM server.
 116
 117 config PHANTOM
 118         tristate "Sensable PHANToM (PCI)"
 119         depends on PCI
 120         help
 121           Say Y here if you want to build a driver for Sensable PHANToM device.
 122
 123           This driver is only for PCI PHANToMs.
 124
 125           If you choose to build module, its name will be phantom. If unsure,
 126           say N here.
 127
 128 config INTEL_MID_PTI
 129         tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
 130         depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST)
 131         default n
 132         help
 133           The PTI (Parallel Trace Interface) driver directs
 134           trace data routed from various parts in the system out
 135           through an Intel Penwell PTI port and out of the mobile
 136           device for analysis with a debugging tool (Lauterbach or Fido).
 137
 138           You should select this driver if the target kernel is meant for
 139           an Intel Atom (non-netbook) mobile device containing a MIPI
 140           P1149.7 standard implementation.
 141
 142 config SGI_IOC4
 143         tristate "SGI IOC4 Base IO support"
 144         depends on PCI
 145         ---help---
 146           This option enables basic support for the IOC4 chip on certain
 147           SGI IO controller cards (IO9, IO10, and PCI-RT).  This option
 148           does not enable any specific functions on such a card, but provides
 149           necessary infrastructure for other drivers to utilize.
 150
 151           If you have an SGI Altix with an IOC4-based card say Y.
 152           Otherwise say N.
 153
 154 config TIFM_CORE
 155         tristate "TI Flash Media interface support"
 156         depends on PCI
 157         help
 158           If you want support for Texas Instruments(R) Flash Media adapters
 159           you should select this option and then also choose an appropriate
 160           host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
 161           support', if you have a TI PCI74xx compatible card reader, for
 162           example.
 163           You will also have to select some flash card format drivers. MMC/SD
 164           cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
 165           Interface support (MMC_TIFM_SD)'.
 166
 167           To compile this driver as a module, choose M here: the module will
 168           be called tifm_core.
 169
 170 config TIFM_7XX1
 171         tristate "TI Flash Media PCI74xx/PCI76xx host adapter support"
 172         depends on PCI && TIFM_CORE
 173         default TIFM_CORE
 174         help
 175           This option enables support for Texas Instruments(R) PCI74xx and
 176           PCI76xx families of Flash Media adapters, found in many laptops.
 177           To make actual use of the device, you will have to select some
 178           flash card format drivers, as outlined in the TIFM_CORE Help.
 179
 180           To compile this driver as a module, choose M here: the module will
 181           be called tifm_7xx1.
 182
 183 config ICS932S401
 184         tristate "Integrated Circuits ICS932S401"
 185         depends on I2C
 186         help
 187           If you say yes here you get support for the Integrated Circuits
 188           ICS932S401 clock control chips.
 189
 190           This driver can also be built as a module. If so, the module
 191           will be called ics932s401.
 192
 193 config ATMEL_SSC
 194         tristate "Device driver for Atmel SSC peripheral"
 195         depends on HAS_IOMEM && (AVR32 || ARCH_AT91 || COMPILE_TEST)
 196         ---help---
 197           This option enables device driver support for Atmel Synchronized
 198           Serial Communication peripheral (SSC).
 199
 200           The SSC peripheral supports a wide variety of serial frame based
 201           communications, i.e. I2S, SPI, etc.
 202
 203           If unsure, say N.
 204
 205 config ENCLOSURE_SERVICES
 206         tristate "Enclosure Services"
 207         default n
 208         help
 209           Provides support for intelligent enclosures (bays which
 210           contain storage devices).  You also need either a host
 211           driver (SCSI/ATA) which supports enclosures
 212           or a SCSI enclosure device (SES) to use these services.
 213
 214 config SGI_XP
 215         tristate "Support communication between SGI SSIs"
 216         depends on NET
 217         depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
 218         select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 219         select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 220         select SGI_GRU if X86_64 && SMP
 221         ---help---
 222           An SGI machine can be divided into multiple Single System
 223           Images which act independently of each other and have
 224           hardware based memory protection from the others.  Enabling
 225           this feature will allow for direct communication between SSIs
 226           based on a network adapter and DMA messaging.
 227
 228 config CS5535_MFGPT
 229         tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
 230         depends on MFD_CS5535
 231         default n
 232         help
 233           This driver provides access to MFGPT functionality for other
 234           drivers that need timers.  MFGPTs are available in the CS5535 and
 235           CS5536 companion chips that are found in AMD Geode and several
 236           other platforms.  They have a better resolution and max interval
 237           than the generic PIT, and are suitable for use as high-res timers.
 238           You probably don't want to enable this manually; other drivers that
 239           make use of it should enable it.
 240
 241 config CS5535_MFGPT_DEFAULT_IRQ
 242         int
 243         depends on CS5535_MFGPT
 244         default 7
 245         help
 246           MFGPTs on the CS5535 require an interrupt.  The selected IRQ
 247           can be overridden as a module option as well as by driver that
 248           use the cs5535_mfgpt_ API; however, different architectures might
 249           want to use a different IRQ by default.  This is here for
 250           architectures to set as necessary.
 251
 252 config CS5535_CLOCK_EVENT_SRC
 253         tristate "CS5535/CS5536 high-res timer (MFGPT) events"
 254         depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
 255         help
 256           This driver provides a clock event source based on the MFGPT
 257           timer(s) in the CS5535 and CS5536 companion chips.
 258           MFGPTs have a better resolution and max interval than the
 259           generic PIT, and are suitable for use as high-res timers.
 260
 261 config HP_ILO
 262         tristate "Channel interface driver for the HP iLO processor"
 263         depends on PCI
 264         default n
 265         help
 266           The channel interface driver allows applications to communicate
 267           with iLO management processors present on HP ProLiant servers.
 268           Upon loading, the driver creates /dev/hpilo/dXccbN files, which
 269           can be used to gather data from the management processor, via
 270           read and write system calls.
 271
 272           To compile this driver as a module, choose M here: the
 273           module will be called hpilo.
 274
 275 config QCOM_COINCELL
 276         tristate "Qualcomm coincell charger support"
 277         depends on MFD_SPMI_PMIC || COMPILE_TEST
 278         help
 279           This driver supports the coincell block found inside of
 280           Qualcomm PMICs.  The coincell charger provides a means to
 281           charge a coincell battery or backup capacitor which is used
 282           to maintain PMIC register and RTC state in the absence of
 283           external power.
 284
 285 config SGI_GRU
 286         tristate "SGI GRU driver"
 287         depends on X86_UV && SMP
 288         default n
 289         select MMU_NOTIFIER
 290         ---help---
 291         The GRU is a hardware resource located in the system chipset. The GRU
 292         contains memory that can be mmapped into the user address space. This memory is
 293         used to communicate with the GRU to perform functions such as load/store,
 294         scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
 295         instructions using user virtual addresses. GRU instructions (ex., bcopy) use
 296         user virtual addresses for operands.
 297
 298         If you are not running on a SGI UV system, say N.
 299
 300 config SGI_GRU_DEBUG
 301         bool  "SGI GRU driver debug"
 302         depends on SGI_GRU
 303         default n
 304         ---help---
 305         This option enables additional debugging code for the SGI GRU driver.
 306         If you are unsure, say N.
 307
 308 config APDS9802ALS
 309         tristate "Medfield Avago APDS9802 ALS Sensor module"
 310         depends on I2C
 311         help
 312           If you say yes here you get support for the ALS APDS9802 ambient
 313           light sensor.
 314
 315           This driver can also be built as a module.  If so, the module
 316           will be called apds9802als.
 317
 318 config ISL29003
 319         tristate "Intersil ISL29003 ambient light sensor"
 320         depends on I2C && SYSFS
 321         help
 322           If you say yes here you get support for the Intersil ISL29003
 323           ambient light sensor.
 324
 325           This driver can also be built as a module.  If so, the module
 326           will be called isl29003.
 327
 328 config ISL29020
 329         tristate "Intersil ISL29020 ambient light sensor"
 330         depends on I2C
 331         help
 332           If you say yes here you get support for the Intersil ISL29020
 333           ambient light sensor.
 334
 335           This driver can also be built as a module.  If so, the module
 336           will be called isl29020.
 337
 338 config SENSORS_TSL2550
 339         tristate "Taos TSL2550 ambient light sensor"
 340         depends on I2C && SYSFS
 341         help
 342           If you say yes here you get support for the Taos TSL2550
 343           ambient light sensor.
 344
 345           This driver can also be built as a module.  If so, the module
 346           will be called tsl2550.
 347
 348 config SENSORS_BH1770
 349          tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
 350          depends on I2C
 351          ---help---
 352            Say Y here if you want to build a driver for BH1770GLC (ROHM) or
 353            SFH7770 (Osram) combined ambient light and proximity sensor chip.
 354
 355            To compile this driver as a module, choose M here: the
 356            module will be called bh1770glc. If unsure, say N here.
 357
 358 config SENSORS_APDS990X
 359          tristate "APDS990X combined als and proximity sensors"
 360          depends on I2C
 361          default n
 362          ---help---
 363            Say Y here if you want to build a driver for Avago APDS990x
 364            combined ambient light and proximity sensor chip.
 365
 366            To compile this driver as a module, choose M here: the
 367            module will be called apds990x. If unsure, say N here.
 368
 369 config HMC6352
 370         tristate "Honeywell HMC6352 compass"
 371         depends on I2C
 372         help
 373           This driver provides support for the Honeywell HMC6352 compass,
 374           providing configuration and heading data via sysfs.
 375
 376 config DS1682
 377         tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
 378         depends on I2C
 379         help
 380           If you say yes here you get support for Dallas Semiconductor
 381           DS1682 Total Elapsed Time Recorder.
 382
 383           This driver can also be built as a module.  If so, the module
 384           will be called ds1682.
 385
 386 config SPEAR13XX_PCIE_GADGET
 387         bool "PCIe gadget support for SPEAr13XX platform"
 388         depends on ARCH_SPEAR13XX && BROKEN
 389         default n
 390         help
 391          This option enables gadget support for PCIe controller. If
 392          board file defines any controller as PCIe endpoint then a sysfs
 393          entry will be created for that controller. User can use these
 394          sysfs node to configure PCIe EP as per his requirements.
 395
 396 config VMWARE_BALLOON
 397         tristate "VMware Balloon Driver"
 398         depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST
 399         help
 400           This is VMware physical memory management driver which acts
 401           like a "balloon" that can be inflated to reclaim physical pages
 402           by reserving them in the guest and invalidating them in the
 403           monitor, freeing up the underlying machine pages so they can
 404           be allocated to other guests. The balloon can also be deflated
 405           to allow the guest to use more physical memory.
 406
 407           If unsure, say N.
 408
 409           To compile this driver as a module, choose M here: the
 410           module will be called vmw_balloon.
 411
 412 config PCH_PHUB
 413         tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
 414         select GENERIC_NET_UTILS
 415         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 416         help
 417           This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
 418           Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
 419           processor. The Topcliff has MAC address and Option ROM data in SROM.
 420           This driver can access MAC address and Option ROM data in SROM.
 421
 422           This driver also can be used for LAPIS Semiconductor's IOH,
 423           ML7213/ML7223/ML7831.
 424           ML7213 which is for IVI(In-Vehicle Infotainment) use.
 425           ML7223 IOH is for MP(Media Phone) use.
 426           ML7831 IOH is for general purpose use.
 427           ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
 428           ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 429
 430           To compile this driver as a module, choose M here: the module will
 431           be called pch_phub.
 432
 433 config USB_SWITCH_FSA9480
 434         tristate "FSA9480 USB Switch"
 435         depends on I2C
 436         help
 437           The FSA9480 is a USB port accessory detector and switch.
 438           The FSA9480 is fully controlled using I2C and enables USB data,
 439           stereo and mono audio, video, microphone and UART data to use
 440           a common connector port.
 441
 442 config LATTICE_ECP3_CONFIG
 443         tristate "Lattice ECP3 FPGA bitstream configuration via SPI"
 444         depends on SPI && SYSFS
 445         select FW_LOADER
 446         default n
 447         help
 448           This option enables support for bitstream configuration (programming
 449           or loading) of the Lattice ECP3 FPGA family via SPI.
 450
 451           If unsure, say N.
 452
 453 config SRAM
 454         bool "Generic on-chip SRAM driver"
 455         depends on HAS_IOMEM
 456         select GENERIC_ALLOCATOR
 457         select SRAM_EXEC if ARM
 458         help
 459           This driver allows you to declare a memory region to be managed by
 460           the genalloc API. It is supposed to be used for small on-chip SRAM
 461           areas found on many SoCs.
 462
 463 config SRAM_EXEC
 464         bool
 465
 466 config VEXPRESS_SYSCFG
 467         bool "Versatile Express System Configuration driver"
 468         depends on VEXPRESS_CONFIG
 469         default y
 470         help
 471           ARM Ltd. Versatile Express uses specialised platform configuration
 472           bus. System Configuration interface is one of the possible means
 473           of generating transactions on this bus.
 474
 475 config ASPEED_LPC_CTRL
 476         depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
 477         tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
 478         ---help---
 479           Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
 480           ioctl()s, the driver also provides a read/write interface to a BMC ram
 481           region where the host LPC read/write region can be buffered.
 482
 483 config ASPEED_LPC_SNOOP
 484         tristate "Aspeed ast2500 HOST LPC snoop support"
 485         depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
 486         help
 487           Provides a driver to control the LPC snoop interface which
 488           allows the BMC to listen on and save the data written by
 489           the host to an arbitrary LPC I/O port.
 490
 491 config PCI_ENDPOINT_TEST
 492         depends on PCI
 493         select CRC32
 494         tristate "PCI Endpoint Test driver"
 495         ---help---
 496            Enable this configuration option to enable the host side test driver
 497            for PCI Endpoint.
 498
 499 config MISC_RTSX
 500         tristate
 501         default MISC_RTSX_PCI || MISC_RTSX_USB
 502
 503 source "drivers/misc/c2port/Kconfig"
 504 source "drivers/misc/eeprom/Kconfig"
 505 source "drivers/misc/cb710/Kconfig"
 506 source "drivers/misc/ti-st/Kconfig"
 507 source "drivers/misc/lis3lv02d/Kconfig"
 508 source "drivers/misc/altera-stapl/Kconfig"
 509 source "drivers/misc/mei/Kconfig"
 510 source "drivers/misc/vmw_vmci/Kconfig"
 511 source "drivers/misc/mic/Kconfig"
 512 source "drivers/misc/genwqe/Kconfig"
 513 source "drivers/misc/echo/Kconfig"
 514 source "drivers/misc/cxl/Kconfig"
 515 source "drivers/misc/ocxl/Kconfig"
 516 source "drivers/misc/cardreader/Kconfig"
 517 endmenu