]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/blob - drivers/mmc/host/sdhci.c
projects / mirror_ubuntu-hirsute-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
crypto: qat - change the adf_ctl_stop_devices to void
[mirror_ubuntu-hirsute-kernel.git] / drivers / mmc / host / sdhci.c
1 /*
2 * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
3 *
4 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
10 *
11 * Thanks to the following companies for their support:
12 *
13 * - JMicron (hardware and technical support)
14 */
15
16 #include <linux/delay.h>
17 #include <linux/highmem.h>
18 #include <linux/io.h>
19 #include <linux/module.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/slab.h>
22 #include <linux/scatterlist.h>
23 #include <linux/regulator/consumer.h>
24 #include <linux/pm_runtime.h>
25
26 #include <linux/leds.h>
27
28 #include <linux/mmc/mmc.h>
29 #include <linux/mmc/host.h>
30 #include <linux/mmc/card.h>
31 #include <linux/mmc/sdio.h>
32 #include <linux/mmc/slot-gpio.h>
33
34 #include "sdhci.h"
35
36 #define DRIVER_NAME "sdhci"
37
38 #define DBG(f, x...) \
39 pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
40
41 #if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
42 defined(CONFIG_MMC_SDHCI_MODULE))
43 #define SDHCI_USE_LEDS_CLASS
44 #endif
45
46 #define MAX_TUNING_LOOP 40
47
48 static unsigned int debug_quirks = 0;
49 static unsigned int debug_quirks2;
50
51 static void sdhci_finish_data(struct sdhci_host *);
52
53 static void sdhci_finish_command(struct sdhci_host *);
54 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
55 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
56 static int sdhci_do_get_cd(struct sdhci_host *host);
57
58 #ifdef CONFIG_PM
59 static int sdhci_runtime_pm_get(struct sdhci_host *host);
60 static int sdhci_runtime_pm_put(struct sdhci_host *host);
61 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
62 static void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
63 #else
64 static inline int sdhci_runtime_pm_get(struct sdhci_host *host)
65 {
66 return 0;
67 }
68 static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
69 {
70 return 0;
71 }
72 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
73 {
74 }
75 static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
76 {
77 }
78 #endif
79
80 static void sdhci_dumpregs(struct sdhci_host *host)
81 {
82 pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
83 mmc_hostname(host->mmc));
84
85 pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
86 sdhci_readl(host, SDHCI_DMA_ADDRESS),
87 sdhci_readw(host, SDHCI_HOST_VERSION));
88 pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
89 sdhci_readw(host, SDHCI_BLOCK_SIZE),
90 sdhci_readw(host, SDHCI_BLOCK_COUNT));
91 pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
92 sdhci_readl(host, SDHCI_ARGUMENT),
93 sdhci_readw(host, SDHCI_TRANSFER_MODE));
94 pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
95 sdhci_readl(host, SDHCI_PRESENT_STATE),
96 sdhci_readb(host, SDHCI_HOST_CONTROL));
97 pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
98 sdhci_readb(host, SDHCI_POWER_CONTROL),
99 sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
100 pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
101 sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
102 sdhci_readw(host, SDHCI_CLOCK_CONTROL));
103 pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
104 sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
105 sdhci_readl(host, SDHCI_INT_STATUS));
106 pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
107 sdhci_readl(host, SDHCI_INT_ENABLE),
108 sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
109 pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
110 sdhci_readw(host, SDHCI_ACMD12_ERR),
111 sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
112 pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
113 sdhci_readl(host, SDHCI_CAPABILITIES),
114 sdhci_readl(host, SDHCI_CAPABILITIES_1));
115 pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
116 sdhci_readw(host, SDHCI_COMMAND),
117 sdhci_readl(host, SDHCI_MAX_CURRENT));
118 pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
119 sdhci_readw(host, SDHCI_HOST_CONTROL2));
120
121 if (host->flags & SDHCI_USE_ADMA) {
122 if (host->flags & SDHCI_USE_64_BIT_DMA)
123 pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n",
124 readl(host->ioaddr + SDHCI_ADMA_ERROR),
125 readl(host->ioaddr + SDHCI_ADMA_ADDRESS_HI),
126 readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
127 else
128 pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
129 readl(host->ioaddr + SDHCI_ADMA_ERROR),
130 readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
131 }
132
133 pr_debug(DRIVER_NAME ": ===========================================\n");
134 }
135
136 /*****************************************************************************\
137 * *
138 * Low level functions *
139 * *
140 \*****************************************************************************/
141
142 static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
143 {
144 u32 present;
145
146 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
147 (host->mmc->caps & MMC_CAP_NONREMOVABLE))
148 return;
149
150 if (enable) {
151 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
152 SDHCI_CARD_PRESENT;
153
154 host->ier |= present ? SDHCI_INT_CARD_REMOVE :
155 SDHCI_INT_CARD_INSERT;
156 } else {
157 host->ier &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
158 }
159
160 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
161 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
162 }
163
164 static void sdhci_enable_card_detection(struct sdhci_host *host)
165 {
166 sdhci_set_card_detection(host, true);
167 }
168
169 static void sdhci_disable_card_detection(struct sdhci_host *host)
170 {
171 sdhci_set_card_detection(host, false);
172 }
173
174 void sdhci_reset(struct sdhci_host *host, u8 mask)
175 {
176 unsigned long timeout;
177
178 sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
179
180 if (mask & SDHCI_RESET_ALL) {
181 host->clock = 0;
182 /* Reset-all turns off SD Bus Power */
183 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
184 sdhci_runtime_pm_bus_off(host);
185 }
186
187 /* Wait max 100 ms */
188 timeout = 100;
189
190 /* hw clears the bit when it's done */
191 while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
192 if (timeout == 0) {
193 pr_err("%s: Reset 0x%x never completed.\n",
194 mmc_hostname(host->mmc), (int)mask);
195 sdhci_dumpregs(host);
196 return;
197 }
198 timeout--;
199 mdelay(1);
200 }
201 }
202 EXPORT_SYMBOL_GPL(sdhci_reset);
203
204 static void sdhci_do_reset(struct sdhci_host *host, u8 mask)
205 {
206 if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
207 if (!sdhci_do_get_cd(host))
208 return;
209 }
210
211 host->ops->reset(host, mask);
212
213 if (mask & SDHCI_RESET_ALL) {
214 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
215 if (host->ops->enable_dma)
216 host->ops->enable_dma(host);
217 }
218
219 /* Resetting the controller clears many */
220 host->preset_enabled = false;
221 }
222 }
223
224 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
225
226 static void sdhci_init(struct sdhci_host *host, int soft)
227 {
228 if (soft)
229 sdhci_do_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
230 else
231 sdhci_do_reset(host, SDHCI_RESET_ALL);
232
233 host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
234 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT |
235 SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC |
236 SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END |
237 SDHCI_INT_RESPONSE;
238
239 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
240 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
241
242 if (soft) {
243 /* force clock reconfiguration */
244 host->clock = 0;
245 sdhci_set_ios(host->mmc, &host->mmc->ios);
246 }
247 }
248
249 static void sdhci_reinit(struct sdhci_host *host)
250 {
251 sdhci_init(host, 0);
252 sdhci_enable_card_detection(host);
253 }
254
255 static void sdhci_activate_led(struct sdhci_host *host)
256 {
257 u8 ctrl;
258
259 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
260 ctrl |= SDHCI_CTRL_LED;
261 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
262 }
263
264 static void sdhci_deactivate_led(struct sdhci_host *host)
265 {
266 u8 ctrl;
267
268 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
269 ctrl &= ~SDHCI_CTRL_LED;
270 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
271 }
272
273 #ifdef SDHCI_USE_LEDS_CLASS
274 static void sdhci_led_control(struct led_classdev *led,
275 enum led_brightness brightness)
276 {
277 struct sdhci_host *host = container_of(led, struct sdhci_host, led);
278 unsigned long flags;
279
280 spin_lock_irqsave(&host->lock, flags);
281
282 if (host->runtime_suspended)
283 goto out;
284
285 if (brightness == LED_OFF)
286 sdhci_deactivate_led(host);
287 else
288 sdhci_activate_led(host);
289 out:
290 spin_unlock_irqrestore(&host->lock, flags);
291 }
292 #endif
293
294 /*****************************************************************************\
295 * *
296 * Core functions *
297 * *
298 \*****************************************************************************/
299
300 static void sdhci_read_block_pio(struct sdhci_host *host)
301 {
302 unsigned long flags;
303 size_t blksize, len, chunk;
304 u32 uninitialized_var(scratch);
305 u8 *buf;
306
307 DBG("PIO reading\n");
308
309 blksize = host->data->blksz;
310 chunk = 0;
311
312 local_irq_save(flags);
313
314 while (blksize) {
315 BUG_ON(!sg_miter_next(&host->sg_miter));
316
317 len = min(host->sg_miter.length, blksize);
318
319 blksize -= len;
320 host->sg_miter.consumed = len;
321
322 buf = host->sg_miter.addr;
323
324 while (len) {
325 if (chunk == 0) {
326 scratch = sdhci_readl(host, SDHCI_BUFFER);
327 chunk = 4;
328 }
329
330 *buf = scratch & 0xFF;
331
332 buf++;
333 scratch >>= 8;
334 chunk--;
335 len--;
336 }
337 }
338
339 sg_miter_stop(&host->sg_miter);
340
341 local_irq_restore(flags);
342 }
343
344 static void sdhci_write_block_pio(struct sdhci_host *host)
345 {
346 unsigned long flags;
347 size_t blksize, len, chunk;
348 u32 scratch;
349 u8 *buf;
350
351 DBG("PIO writing\n");
352
353 blksize = host->data->blksz;
354 chunk = 0;
355 scratch = 0;
356
357 local_irq_save(flags);
358
359 while (blksize) {
360 BUG_ON(!sg_miter_next(&host->sg_miter));
361
362 len = min(host->sg_miter.length, blksize);
363
364 blksize -= len;
365 host->sg_miter.consumed = len;
366
367 buf = host->sg_miter.addr;
368
369 while (len) {
370 scratch |= (u32)*buf << (chunk * 8);
371
372 buf++;
373 chunk++;
374 len--;
375
376 if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
377 sdhci_writel(host, scratch, SDHCI_BUFFER);
378 chunk = 0;
379 scratch = 0;
380 }
381 }
382 }
383
384 sg_miter_stop(&host->sg_miter);
385
386 local_irq_restore(flags);
387 }
388
389 static void sdhci_transfer_pio(struct sdhci_host *host)
390 {
391 u32 mask;
392
393 BUG_ON(!host->data);
394
395 if (host->blocks == 0)
396 return;
397
398 if (host->data->flags & MMC_DATA_READ)
399 mask = SDHCI_DATA_AVAILABLE;
400 else
401 mask = SDHCI_SPACE_AVAILABLE;
402
403 /*
404 * Some controllers (JMicron JMB38x) mess up the buffer bits
405 * for transfers < 4 bytes. As long as it is just one block,
406 * we can ignore the bits.
407 */
408 if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
409 (host->data->blocks == 1))
410 mask = ~0;
411
412 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
413 if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
414 udelay(100);
415
416 if (host->data->flags & MMC_DATA_READ)
417 sdhci_read_block_pio(host);
418 else
419 sdhci_write_block_pio(host);
420
421 host->blocks--;
422 if (host->blocks == 0)
423 break;
424 }
425
426 DBG("PIO transfer complete.\n");
427 }
428
429 static int sdhci_pre_dma_transfer(struct sdhci_host *host,
430 struct mmc_data *data, int cookie)
431 {
432 int sg_count;
433
434 /*
435 * If the data buffers are already mapped, return the previous
436 * dma_map_sg() result.
437 */
438 if (data->host_cookie == COOKIE_PRE_MAPPED)
439 return data->sg_count;
440
441 sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
442 data->flags & MMC_DATA_WRITE ?
443 DMA_TO_DEVICE : DMA_FROM_DEVICE);
444
445 if (sg_count == 0)
446 return -ENOSPC;
447
448 data->sg_count = sg_count;
449 data->host_cookie = cookie;
450
451 return sg_count;
452 }
453
454 static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
455 {
456 local_irq_save(*flags);
457 return kmap_atomic(sg_page(sg)) + sg->offset;
458 }
459
460 static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
461 {
462 kunmap_atomic(buffer);
463 local_irq_restore(*flags);
464 }
465
466 static void sdhci_adma_write_desc(struct sdhci_host *host, void *desc,
467 dma_addr_t addr, int len, unsigned cmd)
468 {
469 struct sdhci_adma2_64_desc *dma_desc = desc;
470
471 /* 32-bit and 64-bit descriptors have these members in same position */
472 dma_desc->cmd = cpu_to_le16(cmd);
473 dma_desc->len = cpu_to_le16(len);
474 dma_desc->addr_lo = cpu_to_le32((u32)addr);
475
476 if (host->flags & SDHCI_USE_64_BIT_DMA)
477 dma_desc->addr_hi = cpu_to_le32((u64)addr >> 32);
478 }
479
480 static void sdhci_adma_mark_end(void *desc)
481 {
482 struct sdhci_adma2_64_desc *dma_desc = desc;
483
484 /* 32-bit and 64-bit descriptors have 'cmd' in same position */
485 dma_desc->cmd |= cpu_to_le16(ADMA2_END);
486 }
487
488 static void sdhci_adma_table_pre(struct sdhci_host *host,
489 struct mmc_data *data, int sg_count)
490 {
491 struct scatterlist *sg;
492 unsigned long flags;
493 dma_addr_t addr, align_addr;
494 void *desc, *align;
495 char *buffer;
496 int len, offset, i;
497
498 /*
499 * The spec does not specify endianness of descriptor table.
500 * We currently guess that it is LE.
501 */
502
503 host->sg_count = sg_count;
504
505 desc = host->adma_table;
506 align = host->align_buffer;
507
508 align_addr = host->align_addr;
509
510 for_each_sg(data->sg, sg, host->sg_count, i) {
511 addr = sg_dma_address(sg);
512 len = sg_dma_len(sg);
513
514 /*
515 * The SDHCI specification states that ADMA addresses must
516 * be 32-bit aligned. If they aren't, then we use a bounce
517 * buffer for the (up to three) bytes that screw up the
518 * alignment.
519 */
520 offset = (SDHCI_ADMA2_ALIGN - (addr & SDHCI_ADMA2_MASK)) &
521 SDHCI_ADMA2_MASK;
522 if (offset) {
523 if (data->flags & MMC_DATA_WRITE) {
524 buffer = sdhci_kmap_atomic(sg, &flags);
525 memcpy(align, buffer, offset);
526 sdhci_kunmap_atomic(buffer, &flags);
527 }
528
529 /* tran, valid */
530 sdhci_adma_write_desc(host, desc, align_addr, offset,
531 ADMA2_TRAN_VALID);
532
533 BUG_ON(offset > 65536);
534
535 align += SDHCI_ADMA2_ALIGN;
536 align_addr += SDHCI_ADMA2_ALIGN;
537
538 desc += host->desc_sz;
539
540 addr += offset;
541 len -= offset;
542 }
543
544 BUG_ON(len > 65536);
545
546 if (len) {
547 /* tran, valid */
548 sdhci_adma_write_desc(host, desc, addr, len,
549 ADMA2_TRAN_VALID);
550 desc += host->desc_sz;
551 }
552
553 /*
554 * If this triggers then we have a calculation bug
555 * somewhere. :/
556 */
557 WARN_ON((desc - host->adma_table) >= host->adma_table_sz);
558 }
559
560 if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
561 /* Mark the last descriptor as the terminating descriptor */
562 if (desc != host->adma_table) {
563 desc -= host->desc_sz;
564 sdhci_adma_mark_end(desc);
565 }
566 } else {
567 /* Add a terminating entry - nop, end, valid */
568 sdhci_adma_write_desc(host, desc, 0, 0, ADMA2_NOP_END_VALID);
569 }
570 }
571
572 static void sdhci_adma_table_post(struct sdhci_host *host,
573 struct mmc_data *data)
574 {
575 struct scatterlist *sg;
576 int i, size;
577 void *align;
578 char *buffer;
579 unsigned long flags;
580
581 if (data->flags & MMC_DATA_READ) {
582 bool has_unaligned = false;
583
584 /* Do a quick scan of the SG list for any unaligned mappings */
585 for_each_sg(data->sg, sg, host->sg_count, i)
586 if (sg_dma_address(sg) & SDHCI_ADMA2_MASK) {
587 has_unaligned = true;
588 break;
589 }
590
591 if (has_unaligned) {
592 dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
593 data->sg_len, DMA_FROM_DEVICE);
594
595 align = host->align_buffer;
596
597 for_each_sg(data->sg, sg, host->sg_count, i) {
598 if (sg_dma_address(sg) & SDHCI_ADMA2_MASK) {
599 size = SDHCI_ADMA2_ALIGN -
600 (sg_dma_address(sg) & SDHCI_ADMA2_MASK);
601
602 buffer = sdhci_kmap_atomic(sg, &flags);
603 memcpy(buffer, align, size);
604 sdhci_kunmap_atomic(buffer, &flags);
605
606 align += SDHCI_ADMA2_ALIGN;
607 }
608 }
609 }
610 }
611 }
612
613 static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
614 {
615 u8 count;
616 struct mmc_data *data = cmd->data;
617 unsigned target_timeout, current_timeout;
618
619 /*
620 * If the host controller provides us with an incorrect timeout
621 * value, just skip the check and use 0xE. The hardware may take
622 * longer to time out, but that's much better than having a too-short
623 * timeout value.
624 */
625 if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
626 return 0xE;
627
628 /* Unspecified timeout, assume max */
629 if (!data && !cmd->busy_timeout)
630 return 0xE;
631
632 /* timeout in us */
633 if (!data)
634 target_timeout = cmd->busy_timeout * 1000;
635 else {
636 target_timeout = DIV_ROUND_UP(data->timeout_ns, 1000);
637 if (host->clock && data->timeout_clks) {
638 unsigned long long val;
639
640 /*
641 * data->timeout_clks is in units of clock cycles.
642 * host->clock is in Hz. target_timeout is in us.
643 * Hence, us = 1000000 * cycles / Hz. Round up.
644 */
645 val = 1000000 * data->timeout_clks;
646 if (do_div(val, host->clock))
647 target_timeout++;
648 target_timeout += val;
649 }
650 }
651
652 /*
653 * Figure out needed cycles.
654 * We do this in steps in order to fit inside a 32 bit int.
655 * The first step is the minimum timeout, which will have a
656 * minimum resolution of 6 bits:
657 * (1) 2^13*1000 > 2^22,
658 * (2) host->timeout_clk < 2^16
659 * =>
660 * (1) / (2) > 2^6
661 */
662 count = 0;
663 current_timeout = (1 << 13) * 1000 / host->timeout_clk;
664 while (current_timeout < target_timeout) {
665 count++;
666 current_timeout <<= 1;
667 if (count >= 0xF)
668 break;
669 }
670
671 if (count >= 0xF) {
672 DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
673 mmc_hostname(host->mmc), count, cmd->opcode);
674 count = 0xE;
675 }
676
677 return count;
678 }
679
680 static void sdhci_set_transfer_irqs(struct sdhci_host *host)
681 {
682 u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
683 u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
684
685 if (host->flags & SDHCI_REQ_USE_DMA)
686 host->ier = (host->ier & ~pio_irqs) | dma_irqs;
687 else
688 host->ier = (host->ier & ~dma_irqs) | pio_irqs;
689
690 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
691 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
692 }
693
694 static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
695 {
696 u8 count;
697
698 if (host->ops->set_timeout) {
699 host->ops->set_timeout(host, cmd);
700 } else {
701 count = sdhci_calc_timeout(host, cmd);
702 sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
703 }
704 }
705
706 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
707 {
708 u8 ctrl;
709 struct mmc_data *data = cmd->data;
710
711 WARN_ON(host->data);
712
713 if (data || (cmd->flags & MMC_RSP_BUSY))
714 sdhci_set_timeout(host, cmd);
715
716 if (!data)
717 return;
718
719 /* Sanity checks */
720 BUG_ON(data->blksz * data->blocks > 524288);
721 BUG_ON(data->blksz > host->mmc->max_blk_size);
722 BUG_ON(data->blocks > 65535);
723
724 host->data = data;
725 host->data_early = 0;
726 host->data->bytes_xfered = 0;
727
728 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
729 struct scatterlist *sg;
730 unsigned int length_mask, offset_mask;
731 int i;
732
733 host->flags |= SDHCI_REQ_USE_DMA;
734
735 /*
736 * FIXME: This doesn't account for merging when mapping the
737 * scatterlist.
738 *
739 * The assumption here being that alignment and lengths are
740 * the same after DMA mapping to device address space.
741 */
742 length_mask = 0;
743 offset_mask = 0;
744 if (host->flags & SDHCI_USE_ADMA) {
745 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE) {
746 length_mask = 3;
747 /*
748 * As we use up to 3 byte chunks to work
749 * around alignment problems, we need to
750 * check the offset as well.
751 */
752 offset_mask = 3;
753 }
754 } else {
755 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
756 length_mask = 3;
757 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
758 offset_mask = 3;
759 }
760
761 if (unlikely(length_mask | offset_mask)) {
762 for_each_sg(data->sg, sg, data->sg_len, i) {
763 if (sg->length & length_mask) {
764 DBG("Reverting to PIO because of transfer size (%d)\n",
765 sg->length);
766 host->flags &= ~SDHCI_REQ_USE_DMA;
767 break;
768 }
769 if (sg->offset & offset_mask) {
770 DBG("Reverting to PIO because of bad alignment\n");
771 host->flags &= ~SDHCI_REQ_USE_DMA;
772 break;
773 }
774 }
775 }
776 }
777
778 if (host->flags & SDHCI_REQ_USE_DMA) {
779 int sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED);
780
781 if (sg_cnt <= 0) {
782 /*
783 * This only happens when someone fed
784 * us an invalid request.
785 */
786 WARN_ON(1);
787 host->flags &= ~SDHCI_REQ_USE_DMA;
788 } else if (host->flags & SDHCI_USE_ADMA) {
789 sdhci_adma_table_pre(host, data, sg_cnt);
790
791 sdhci_writel(host, host->adma_addr, SDHCI_ADMA_ADDRESS);
792 if (host->flags & SDHCI_USE_64_BIT_DMA)
793 sdhci_writel(host,
794 (u64)host->adma_addr >> 32,
795 SDHCI_ADMA_ADDRESS_HI);
796 } else {
797 WARN_ON(sg_cnt != 1);
798 sdhci_writel(host, sg_dma_address(data->sg),
799 SDHCI_DMA_ADDRESS);
800 }
801 }
802
803 /*
804 * Always adjust the DMA selection as some controllers
805 * (e.g. JMicron) can't do PIO properly when the selection
806 * is ADMA.
807 */
808 if (host->version >= SDHCI_SPEC_200) {
809 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
810 ctrl &= ~SDHCI_CTRL_DMA_MASK;
811 if ((host->flags & SDHCI_REQ_USE_DMA) &&
812 (host->flags & SDHCI_USE_ADMA)) {
813 if (host->flags & SDHCI_USE_64_BIT_DMA)
814 ctrl |= SDHCI_CTRL_ADMA64;
815 else
816 ctrl |= SDHCI_CTRL_ADMA32;
817 } else {
818 ctrl |= SDHCI_CTRL_SDMA;
819 }
820 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
821 }
822
823 if (!(host->flags & SDHCI_REQ_USE_DMA)) {
824 int flags;
825
826 flags = SG_MITER_ATOMIC;
827 if (host->data->flags & MMC_DATA_READ)
828 flags |= SG_MITER_TO_SG;
829 else
830 flags |= SG_MITER_FROM_SG;
831 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
832 host->blocks = data->blocks;
833 }
834
835 sdhci_set_transfer_irqs(host);
836
837 /* Set the DMA boundary value and block size */
838 sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
839 data->blksz), SDHCI_BLOCK_SIZE);
840 sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
841 }
842
843 static void sdhci_set_transfer_mode(struct sdhci_host *host,
844 struct mmc_command *cmd)
845 {
846 u16 mode = 0;
847 struct mmc_data *data = cmd->data;
848
849 if (data == NULL) {
850 if (host->quirks2 &
851 SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
852 sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
853 } else {
854 /* clear Auto CMD settings for no data CMDs */
855 mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
856 sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
857 SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
858 }
859 return;
860 }
861
862 WARN_ON(!host->data);
863
864 if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE))
865 mode = SDHCI_TRNS_BLK_CNT_EN;
866
867 if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
868 mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI;
869 /*
870 * If we are sending CMD23, CMD12 never gets sent
871 * on successful completion (so no Auto-CMD12).
872 */
873 if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12) &&
874 (cmd->opcode != SD_IO_RW_EXTENDED))
875 mode |= SDHCI_TRNS_AUTO_CMD12;
876 else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
877 mode |= SDHCI_TRNS_AUTO_CMD23;
878 sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2);
879 }
880 }
881
882 if (data->flags & MMC_DATA_READ)
883 mode |= SDHCI_TRNS_READ;
884 if (host->flags & SDHCI_REQ_USE_DMA)
885 mode |= SDHCI_TRNS_DMA;
886
887 sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
888 }
889
890 static void sdhci_finish_data(struct sdhci_host *host)
891 {
892 struct mmc_data *data;
893
894 BUG_ON(!host->data);
895
896 data = host->data;
897 host->data = NULL;
898
899 if ((host->flags & (SDHCI_REQ_USE_DMA | SDHCI_USE_ADMA)) ==
900 (SDHCI_REQ_USE_DMA | SDHCI_USE_ADMA))
901 sdhci_adma_table_post(host, data);
902
903 /*
904 * The specification states that the block count register must
905 * be updated, but it does not specify at what point in the
906 * data flow. That makes the register entirely useless to read
907 * back so we have to assume that nothing made it to the card
908 * in the event of an error.
909 */
910 if (data->error)
911 data->bytes_xfered = 0;
912 else
913 data->bytes_xfered = data->blksz * data->blocks;
914
915 /*
916 * Need to send CMD12 if -
917 * a) open-ended multiblock transfer (no CMD23)
918 * b) error in multiblock transfer
919 */
920 if (data->stop &&
921 (data->error ||
922 !host->mrq->sbc)) {
923
924 /*
925 * The controller needs a reset of internal state machines
926 * upon error conditions.
927 */
928 if (data->error) {
929 sdhci_do_reset(host, SDHCI_RESET_CMD);
930 sdhci_do_reset(host, SDHCI_RESET_DATA);
931 }
932
933 sdhci_send_command(host, data->stop);
934 } else
935 tasklet_schedule(&host->finish_tasklet);
936 }
937
938 void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
939 {
940 int flags;
941 u32 mask;
942 unsigned long timeout;
943
944 WARN_ON(host->cmd);
945
946 /* Initially, a command has no error */
947 cmd->error = 0;
948
949 /* Wait max 10 ms */
950 timeout = 10;
951
952 mask = SDHCI_CMD_INHIBIT;
953 if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
954 mask |= SDHCI_DATA_INHIBIT;
955
956 /* We shouldn't wait for data inihibit for stop commands, even
957 though they might use busy signaling */
958 if (host->mrq->data && (cmd == host->mrq->data->stop))
959 mask &= ~SDHCI_DATA_INHIBIT;
960
961 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
962 if (timeout == 0) {
963 pr_err("%s: Controller never released inhibit bit(s).\n",
964 mmc_hostname(host->mmc));
965 sdhci_dumpregs(host);
966 cmd->error = -EIO;
967 tasklet_schedule(&host->finish_tasklet);
968 return;
969 }
970 timeout--;
971 mdelay(1);
972 }
973
974 timeout = jiffies;
975 if (!cmd->data && cmd->busy_timeout > 9000)
976 timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
977 else
978 timeout += 10 * HZ;
979 mod_timer(&host->timer, timeout);
980
981 host->cmd = cmd;
982 host->busy_handle = 0;
983
984 sdhci_prepare_data(host, cmd);
985
986 sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
987
988 sdhci_set_transfer_mode(host, cmd);
989
990 if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
991 pr_err("%s: Unsupported response type!\n",
992 mmc_hostname(host->mmc));
993 cmd->error = -EINVAL;
994 tasklet_schedule(&host->finish_tasklet);
995 return;
996 }
997
998 if (!(cmd->flags & MMC_RSP_PRESENT))
999 flags = SDHCI_CMD_RESP_NONE;
1000 else if (cmd->flags & MMC_RSP_136)
1001 flags = SDHCI_CMD_RESP_LONG;
1002 else if (cmd->flags & MMC_RSP_BUSY)
1003 flags = SDHCI_CMD_RESP_SHORT_BUSY;
1004 else
1005 flags = SDHCI_CMD_RESP_SHORT;
1006
1007 if (cmd->flags & MMC_RSP_CRC)
1008 flags |= SDHCI_CMD_CRC;
1009 if (cmd->flags & MMC_RSP_OPCODE)
1010 flags |= SDHCI_CMD_INDEX;
1011
1012 /* CMD19 is special in that the Data Present Select should be set */
1013 if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
1014 cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
1015 flags |= SDHCI_CMD_DATA;
1016
1017 sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
1018 }
1019 EXPORT_SYMBOL_GPL(sdhci_send_command);
1020
1021 static void sdhci_finish_command(struct sdhci_host *host)
1022 {
1023 int i;
1024
1025 BUG_ON(host->cmd == NULL);
1026
1027 if (host->cmd->flags & MMC_RSP_PRESENT) {
1028 if (host->cmd->flags & MMC_RSP_136) {
1029 /* CRC is stripped so we need to do some shifting. */
1030 for (i = 0;i < 4;i++) {
1031 host->cmd->resp[i] = sdhci_readl(host,
1032 SDHCI_RESPONSE + (3-i)*4) << 8;
1033 if (i != 3)
1034 host->cmd->resp[i] |=
1035 sdhci_readb(host,
1036 SDHCI_RESPONSE + (3-i)*4-1);
1037 }
1038 } else {
1039 host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
1040 }
1041 }
1042
1043 /* Finished CMD23, now send actual command. */
1044 if (host->cmd == host->mrq->sbc) {
1045 host->cmd = NULL;
1046 sdhci_send_command(host, host->mrq->cmd);
1047 } else {
1048
1049 /* Processed actual command. */
1050 if (host->data && host->data_early)
1051 sdhci_finish_data(host);
1052
1053 if (!host->cmd->data)
1054 tasklet_schedule(&host->finish_tasklet);
1055
1056 host->cmd = NULL;
1057 }
1058 }
1059
1060 static u16 sdhci_get_preset_value(struct sdhci_host *host)
1061 {
1062 u16 preset = 0;
1063
1064 switch (host->timing) {
1065 case MMC_TIMING_UHS_SDR12:
1066 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
1067 break;
1068 case MMC_TIMING_UHS_SDR25:
1069 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
1070 break;
1071 case MMC_TIMING_UHS_SDR50:
1072 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
1073 break;
1074 case MMC_TIMING_UHS_SDR104:
1075 case MMC_TIMING_MMC_HS200:
1076 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
1077 break;
1078 case MMC_TIMING_UHS_DDR50:
1079 case MMC_TIMING_MMC_DDR52:
1080 preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
1081 break;
1082 case MMC_TIMING_MMC_HS400:
1083 preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
1084 break;
1085 default:
1086 pr_warn("%s: Invalid UHS-I mode selected\n",
1087 mmc_hostname(host->mmc));
1088 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
1089 break;
1090 }
1091 return preset;
1092 }
1093
1094 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
1095 {
1096 int div = 0; /* Initialized for compiler warning */
1097 int real_div = div, clk_mul = 1;
1098 u16 clk = 0;
1099 unsigned long timeout;
1100 bool switch_base_clk = false;
1101
1102 host->mmc->actual_clock = 0;
1103
1104 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
1105 if (host->quirks2 & SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST)
1106 mdelay(1);
1107
1108 if (clock == 0)
1109 return;
1110
1111 if (host->version >= SDHCI_SPEC_300) {
1112 if (host->preset_enabled) {
1113 u16 pre_val;
1114
1115 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1116 pre_val = sdhci_get_preset_value(host);
1117 div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
1118 >> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
1119 if (host->clk_mul &&
1120 (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
1121 clk = SDHCI_PROG_CLOCK_MODE;
1122 real_div = div + 1;
1123 clk_mul = host->clk_mul;
1124 } else {
1125 real_div = max_t(int, 1, div << 1);
1126 }
1127 goto clock_set;
1128 }
1129
1130 /*
1131 * Check if the Host Controller supports Programmable Clock
1132 * Mode.
1133 */
1134 if (host->clk_mul) {
1135 for (div = 1; div <= 1024; div++) {
1136 if ((host->max_clk * host->clk_mul / div)
1137 <= clock)
1138 break;
1139 }
1140 if ((host->max_clk * host->clk_mul / div) <= clock) {
1141 /*
1142 * Set Programmable Clock Mode in the Clock
1143 * Control register.
1144 */
1145 clk = SDHCI_PROG_CLOCK_MODE;
1146 real_div = div;
1147 clk_mul = host->clk_mul;
1148 div--;
1149 } else {
1150 /*
1151 * Divisor can be too small to reach clock
1152 * speed requirement. Then use the base clock.
1153 */
1154 switch_base_clk = true;
1155 }
1156 }
1157
1158 if (!host->clk_mul || switch_base_clk) {
1159 /* Version 3.00 divisors must be a multiple of 2. */
1160 if (host->max_clk <= clock)
1161 div = 1;
1162 else {
1163 for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
1164 div += 2) {
1165 if ((host->max_clk / div) <= clock)
1166 break;
1167 }
1168 }
1169 real_div = div;
1170 div >>= 1;
1171 if ((host->quirks2 & SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN)
1172 && !div && host->max_clk <= 25000000)
1173 div = 1;
1174 }
1175 } else {
1176 /* Version 2.00 divisors must be a power of 2. */
1177 for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
1178 if ((host->max_clk / div) <= clock)
1179 break;
1180 }
1181 real_div = div;
1182 div >>= 1;
1183 }
1184
1185 clock_set:
1186 if (real_div)
1187 host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
1188 clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
1189 clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
1190 << SDHCI_DIVIDER_HI_SHIFT;
1191 clk |= SDHCI_CLOCK_INT_EN;
1192 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1193
1194 /* Wait max 20 ms */
1195 timeout = 20;
1196 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
1197 & SDHCI_CLOCK_INT_STABLE)) {
1198 if (timeout == 0) {
1199 pr_err("%s: Internal clock never stabilised.\n",
1200 mmc_hostname(host->mmc));
1201 sdhci_dumpregs(host);
1202 return;
1203 }
1204 timeout--;
1205 mdelay(1);
1206 }
1207
1208 clk |= SDHCI_CLOCK_CARD_EN;
1209 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1210 }
1211 EXPORT_SYMBOL_GPL(sdhci_set_clock);
1212
1213 static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
1214 unsigned short vdd)
1215 {
1216 struct mmc_host *mmc = host->mmc;
1217 u8 pwr = 0;
1218
1219 if (mode != MMC_POWER_OFF) {
1220 switch (1 << vdd) {
1221 case MMC_VDD_165_195:
1222 pwr = SDHCI_POWER_180;
1223 break;
1224 case MMC_VDD_29_30:
1225 case MMC_VDD_30_31:
1226 pwr = SDHCI_POWER_300;
1227 break;
1228 case MMC_VDD_32_33:
1229 case MMC_VDD_33_34:
1230 pwr = SDHCI_POWER_330;
1231 break;
1232 default:
1233 WARN(1, "%s: Invalid vdd %#x\n",
1234 mmc_hostname(host->mmc), vdd);
1235 break;
1236 }
1237 }
1238
1239 if (host->pwr == pwr)
1240 return;
1241
1242 host->pwr = pwr;
1243
1244 if (pwr == 0) {
1245 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1246 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
1247 sdhci_runtime_pm_bus_off(host);
1248 vdd = 0;
1249 } else {
1250 /*
1251 * Spec says that we should clear the power reg before setting
1252 * a new value. Some controllers don't seem to like this though.
1253 */
1254 if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
1255 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1256
1257 /*
1258 * At least the Marvell CaFe chip gets confused if we set the
1259 * voltage and set turn on power at the same time, so set the
1260 * voltage first.
1261 */
1262 if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
1263 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1264
1265 pwr |= SDHCI_POWER_ON;
1266
1267 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1268
1269 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
1270 sdhci_runtime_pm_bus_on(host);
1271
1272 /*
1273 * Some controllers need an extra 10ms delay of 10ms before
1274 * they can apply clock after applying power
1275 */
1276 if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
1277 mdelay(10);
1278 }
1279
1280 if (!IS_ERR(mmc->supply.vmmc)) {
1281 spin_unlock_irq(&host->lock);
1282 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
1283 spin_lock_irq(&host->lock);
1284 }
1285 }
1286
1287 /*****************************************************************************\
1288 * *
1289 * MMC callbacks *
1290 * *
1291 \*****************************************************************************/
1292
1293 static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1294 {
1295 struct sdhci_host *host;
1296 int present;
1297 unsigned long flags;
1298
1299 host = mmc_priv(mmc);
1300
1301 sdhci_runtime_pm_get(host);
1302
1303 /* Firstly check card presence */
1304 present = mmc->ops->get_cd(mmc);
1305
1306 spin_lock_irqsave(&host->lock, flags);
1307
1308 WARN_ON(host->mrq != NULL);
1309
1310 #ifndef SDHCI_USE_LEDS_CLASS
1311 sdhci_activate_led(host);
1312 #endif
1313
1314 /*
1315 * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED
1316 * requests if Auto-CMD12 is enabled.
1317 */
1318 if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) {
1319 if (mrq->stop) {
1320 mrq->data->stop = NULL;
1321 mrq->stop = NULL;
1322 }
1323 }
1324
1325 host->mrq = mrq;
1326
1327 if (!present || host->flags & SDHCI_DEVICE_DEAD) {
1328 host->mrq->cmd->error = -ENOMEDIUM;
1329 tasklet_schedule(&host->finish_tasklet);
1330 } else {
1331 if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
1332 sdhci_send_command(host, mrq->sbc);
1333 else
1334 sdhci_send_command(host, mrq->cmd);
1335 }
1336
1337 mmiowb();
1338 spin_unlock_irqrestore(&host->lock, flags);
1339 }
1340
1341 void sdhci_set_bus_width(struct sdhci_host *host, int width)
1342 {
1343 u8 ctrl;
1344
1345 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1346 if (width == MMC_BUS_WIDTH_8) {
1347 ctrl &= ~SDHCI_CTRL_4BITBUS;
1348 if (host->version >= SDHCI_SPEC_300)
1349 ctrl |= SDHCI_CTRL_8BITBUS;
1350 } else {
1351 if (host->version >= SDHCI_SPEC_300)
1352 ctrl &= ~SDHCI_CTRL_8BITBUS;
1353 if (width == MMC_BUS_WIDTH_4)
1354 ctrl |= SDHCI_CTRL_4BITBUS;
1355 else
1356 ctrl &= ~SDHCI_CTRL_4BITBUS;
1357 }
1358 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1359 }
1360 EXPORT_SYMBOL_GPL(sdhci_set_bus_width);
1361
1362 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
1363 {
1364 u16 ctrl_2;
1365
1366 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1367 /* Select Bus Speed Mode for host */
1368 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
1369 if ((timing == MMC_TIMING_MMC_HS200) ||
1370 (timing == MMC_TIMING_UHS_SDR104))
1371 ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
1372 else if (timing == MMC_TIMING_UHS_SDR12)
1373 ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
1374 else if (timing == MMC_TIMING_UHS_SDR25)
1375 ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
1376 else if (timing == MMC_TIMING_UHS_SDR50)
1377 ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
1378 else if ((timing == MMC_TIMING_UHS_DDR50) ||
1379 (timing == MMC_TIMING_MMC_DDR52))
1380 ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
1381 else if (timing == MMC_TIMING_MMC_HS400)
1382 ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
1383 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
1384 }
1385 EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
1386
1387 static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
1388 {
1389 unsigned long flags;
1390 u8 ctrl;
1391 struct mmc_host *mmc = host->mmc;
1392
1393 spin_lock_irqsave(&host->lock, flags);
1394
1395 if (host->flags & SDHCI_DEVICE_DEAD) {
1396 spin_unlock_irqrestore(&host->lock, flags);
1397 if (!IS_ERR(mmc->supply.vmmc) &&
1398 ios->power_mode == MMC_POWER_OFF)
1399 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
1400 return;
1401 }
1402
1403 /*
1404 * Reset the chip on each power off.
1405 * Should clear out any weird states.
1406 */
1407 if (ios->power_mode == MMC_POWER_OFF) {
1408 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
1409 sdhci_reinit(host);
1410 }
1411
1412 if (host->version >= SDHCI_SPEC_300 &&
1413 (ios->power_mode == MMC_POWER_UP) &&
1414 !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
1415 sdhci_enable_preset_value(host, false);
1416
1417 if (!ios->clock || ios->clock != host->clock) {
1418 host->ops->set_clock(host, ios->clock);
1419 host->clock = ios->clock;
1420
1421 if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK &&
1422 host->clock) {
1423 host->timeout_clk = host->mmc->actual_clock ?
1424 host->mmc->actual_clock / 1000 :
1425 host->clock / 1000;
1426 host->mmc->max_busy_timeout =
1427 host->ops->get_max_timeout_count ?
1428 host->ops->get_max_timeout_count(host) :
1429 1 << 27;
1430 host->mmc->max_busy_timeout /= host->timeout_clk;
1431 }
1432 }
1433
1434 sdhci_set_power(host, ios->power_mode, ios->vdd);
1435
1436 if (host->ops->platform_send_init_74_clocks)
1437 host->ops->platform_send_init_74_clocks(host, ios->power_mode);
1438
1439 host->ops->set_bus_width(host, ios->bus_width);
1440
1441 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1442
1443 if ((ios->timing == MMC_TIMING_SD_HS ||
1444 ios->timing == MMC_TIMING_MMC_HS)
1445 && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
1446 ctrl |= SDHCI_CTRL_HISPD;
1447 else
1448 ctrl &= ~SDHCI_CTRL_HISPD;
1449
1450 if (host->version >= SDHCI_SPEC_300) {
1451 u16 clk, ctrl_2;
1452
1453 /* In case of UHS-I modes, set High Speed Enable */
1454 if ((ios->timing == MMC_TIMING_MMC_HS400) ||
1455 (ios->timing == MMC_TIMING_MMC_HS200) ||
1456 (ios->timing == MMC_TIMING_MMC_DDR52) ||
1457 (ios->timing == MMC_TIMING_UHS_SDR50) ||
1458 (ios->timing == MMC_TIMING_UHS_SDR104) ||
1459 (ios->timing == MMC_TIMING_UHS_DDR50) ||
1460 (ios->timing == MMC_TIMING_UHS_SDR25))
1461 ctrl |= SDHCI_CTRL_HISPD;
1462
1463 if (!host->preset_enabled) {
1464 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1465 /*
1466 * We only need to set Driver Strength if the
1467 * preset value enable is not set.
1468 */
1469 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1470 ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
1471 if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
1472 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
1473 else if (ios->drv_type == MMC_SET_DRIVER_TYPE_B)
1474 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_B;
1475 else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
1476 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
1477 else if (ios->drv_type == MMC_SET_DRIVER_TYPE_D)
1478 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_D;
1479 else {
1480 pr_warn("%s: invalid driver type, default to driver type B\n",
1481 mmc_hostname(mmc));
1482 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_B;
1483 }
1484
1485 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
1486 } else {
1487 /*
1488 * According to SDHC Spec v3.00, if the Preset Value
1489 * Enable in the Host Control 2 register is set, we
1490 * need to reset SD Clock Enable before changing High
1491 * Speed Enable to avoid generating clock gliches.
1492 */
1493
1494 /* Reset SD Clock Enable */
1495 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1496 clk &= ~SDHCI_CLOCK_CARD_EN;
1497 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1498
1499 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1500
1501 /* Re-enable SD Clock */
1502 host->ops->set_clock(host, host->clock);
1503 }
1504
1505 /* Reset SD Clock Enable */
1506 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1507 clk &= ~SDHCI_CLOCK_CARD_EN;
1508 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1509
1510 host->ops->set_uhs_signaling(host, ios->timing);
1511 host->timing = ios->timing;
1512
1513 if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
1514 ((ios->timing == MMC_TIMING_UHS_SDR12) ||
1515 (ios->timing == MMC_TIMING_UHS_SDR25) ||
1516 (ios->timing == MMC_TIMING_UHS_SDR50) ||
1517 (ios->timing == MMC_TIMING_UHS_SDR104) ||
1518 (ios->timing == MMC_TIMING_UHS_DDR50) ||
1519 (ios->timing == MMC_TIMING_MMC_DDR52))) {
1520 u16 preset;
1521
1522 sdhci_enable_preset_value(host, true);
1523 preset = sdhci_get_preset_value(host);
1524 ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
1525 >> SDHCI_PRESET_DRV_SHIFT;
1526 }
1527
1528 /* Re-enable SD Clock */
1529 host->ops->set_clock(host, host->clock);
1530 } else
1531 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1532
1533 /*
1534 * Some (ENE) controllers go apeshit on some ios operation,
1535 * signalling timeout and CRC errors even on CMD0. Resetting
1536 * it on each ios seems to solve the problem.
1537 */
1538 if (host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
1539 sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
1540
1541 mmiowb();
1542 spin_unlock_irqrestore(&host->lock, flags);
1543 }
1544
1545 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1546 {
1547 struct sdhci_host *host = mmc_priv(mmc);
1548
1549 sdhci_runtime_pm_get(host);
1550 sdhci_do_set_ios(host, ios);
1551 sdhci_runtime_pm_put(host);
1552 }
1553
1554 static int sdhci_do_get_cd(struct sdhci_host *host)
1555 {
1556 int gpio_cd = mmc_gpio_get_cd(host->mmc);
1557
1558 if (host->flags & SDHCI_DEVICE_DEAD)
1559 return 0;
1560
1561 /* If nonremovable, assume that the card is always present. */
1562 if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
1563 return 1;
1564
1565 /*
1566 * Try slot gpio detect, if defined it take precedence
1567 * over build in controller functionality
1568 */
1569 if (!IS_ERR_VALUE(gpio_cd))
1570 return !!gpio_cd;
1571
1572 /* If polling, assume that the card is always present. */
1573 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
1574 return 1;
1575
1576 /* Host native card detect */
1577 return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
1578 }
1579
1580 static int sdhci_get_cd(struct mmc_host *mmc)
1581 {
1582 struct sdhci_host *host = mmc_priv(mmc);
1583 int ret;
1584
1585 sdhci_runtime_pm_get(host);
1586 ret = sdhci_do_get_cd(host);
1587 sdhci_runtime_pm_put(host);
1588 return ret;
1589 }
1590
1591 static int sdhci_check_ro(struct sdhci_host *host)
1592 {
1593 unsigned long flags;
1594 int is_readonly;
1595
1596 spin_lock_irqsave(&host->lock, flags);
1597
1598 if (host->flags & SDHCI_DEVICE_DEAD)
1599 is_readonly = 0;
1600 else if (host->ops->get_ro)
1601 is_readonly = host->ops->get_ro(host);
1602 else
1603 is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
1604 & SDHCI_WRITE_PROTECT);
1605
1606 spin_unlock_irqrestore(&host->lock, flags);
1607
1608 /* This quirk needs to be replaced by a callback-function later */
1609 return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
1610 !is_readonly : is_readonly;
1611 }
1612
1613 #define SAMPLE_COUNT 5
1614
1615 static int sdhci_do_get_ro(struct sdhci_host *host)
1616 {
1617 int i, ro_count;
1618
1619 if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT))
1620 return sdhci_check_ro(host);
1621
1622 ro_count = 0;
1623 for (i = 0; i < SAMPLE_COUNT; i++) {
1624 if (sdhci_check_ro(host)) {
1625 if (++ro_count > SAMPLE_COUNT / 2)
1626 return 1;
1627 }
1628 msleep(30);
1629 }
1630 return 0;
1631 }
1632
1633 static void sdhci_hw_reset(struct mmc_host *mmc)
1634 {
1635 struct sdhci_host *host = mmc_priv(mmc);
1636
1637 if (host->ops && host->ops->hw_reset)
1638 host->ops->hw_reset(host);
1639 }
1640
1641 static int sdhci_get_ro(struct mmc_host *mmc)
1642 {
1643 struct sdhci_host *host = mmc_priv(mmc);
1644 int ret;
1645
1646 sdhci_runtime_pm_get(host);
1647 ret = sdhci_do_get_ro(host);
1648 sdhci_runtime_pm_put(host);
1649 return ret;
1650 }
1651
1652 static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
1653 {
1654 if (!(host->flags & SDHCI_DEVICE_DEAD)) {
1655 if (enable)
1656 host->ier |= SDHCI_INT_CARD_INT;
1657 else
1658 host->ier &= ~SDHCI_INT_CARD_INT;
1659
1660 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
1661 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
1662 mmiowb();
1663 }
1664 }
1665
1666 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1667 {
1668 struct sdhci_host *host = mmc_priv(mmc);
1669 unsigned long flags;
1670
1671 sdhci_runtime_pm_get(host);
1672
1673 spin_lock_irqsave(&host->lock, flags);
1674 if (enable)
1675 host->flags |= SDHCI_SDIO_IRQ_ENABLED;
1676 else
1677 host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
1678
1679 sdhci_enable_sdio_irq_nolock(host, enable);
1680 spin_unlock_irqrestore(&host->lock, flags);
1681
1682 sdhci_runtime_pm_put(host);
1683 }
1684
1685 static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
1686 struct mmc_ios *ios)
1687 {
1688 struct mmc_host *mmc = host->mmc;
1689 u16 ctrl;
1690 int ret;
1691
1692 /*
1693 * Signal Voltage Switching is only applicable for Host Controllers
1694 * v3.00 and above.
1695 */
1696 if (host->version < SDHCI_SPEC_300)
1697 return 0;
1698
1699 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1700
1701 switch (ios->signal_voltage) {
1702 case MMC_SIGNAL_VOLTAGE_330:
1703 /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
1704 ctrl &= ~SDHCI_CTRL_VDD_180;
1705 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1706
1707 if (!IS_ERR(mmc->supply.vqmmc)) {
1708 ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
1709 3600000);
1710 if (ret) {
1711 pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
1712 mmc_hostname(mmc));
1713 return -EIO;
1714 }
1715 }
1716 /* Wait for 5ms */
1717 usleep_range(5000, 5500);
1718
1719 /* 3.3V regulator output should be stable within 5 ms */
1720 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1721 if (!(ctrl & SDHCI_CTRL_VDD_180))
1722 return 0;
1723
1724 pr_warn("%s: 3.3V regulator output did not became stable\n",
1725 mmc_hostname(mmc));
1726
1727 return -EAGAIN;
1728 case MMC_SIGNAL_VOLTAGE_180:
1729 if (!IS_ERR(mmc->supply.vqmmc)) {
1730 ret = regulator_set_voltage(mmc->supply.vqmmc,
1731 1700000, 1950000);
1732 if (ret) {
1733 pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
1734 mmc_hostname(mmc));
1735 return -EIO;
1736 }
1737 }
1738
1739 /*
1740 * Enable 1.8V Signal Enable in the Host Control2
1741 * register
1742 */
1743 ctrl |= SDHCI_CTRL_VDD_180;
1744 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1745
1746 /* Some controller need to do more when switching */
1747 if (host->ops->voltage_switch)
1748 host->ops->voltage_switch(host);
1749
1750 /* 1.8V regulator output should be stable within 5 ms */
1751 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1752 if (ctrl & SDHCI_CTRL_VDD_180)
1753 return 0;
1754
1755 pr_warn("%s: 1.8V regulator output did not became stable\n",
1756 mmc_hostname(mmc));
1757
1758 return -EAGAIN;
1759 case MMC_SIGNAL_VOLTAGE_120:
1760 if (!IS_ERR(mmc->supply.vqmmc)) {
1761 ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
1762 1300000);
1763 if (ret) {
1764 pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
1765 mmc_hostname(mmc));
1766 return -EIO;
1767 }
1768 }
1769 return 0;
1770 default:
1771 /* No signal voltage switch required */
1772 return 0;
1773 }
1774 }
1775
1776 static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
1777 struct mmc_ios *ios)
1778 {
1779 struct sdhci_host *host = mmc_priv(mmc);
1780 int err;
1781
1782 if (host->version < SDHCI_SPEC_300)
1783 return 0;
1784 sdhci_runtime_pm_get(host);
1785 err = sdhci_do_start_signal_voltage_switch(host, ios);
1786 sdhci_runtime_pm_put(host);
1787 return err;
1788 }
1789
1790 static int sdhci_card_busy(struct mmc_host *mmc)
1791 {
1792 struct sdhci_host *host = mmc_priv(mmc);
1793 u32 present_state;
1794
1795 sdhci_runtime_pm_get(host);
1796 /* Check whether DAT[3:0] is 0000 */
1797 present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
1798 sdhci_runtime_pm_put(host);
1799
1800 return !(present_state & SDHCI_DATA_LVL_MASK);
1801 }
1802
1803 static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
1804 {
1805 struct sdhci_host *host = mmc_priv(mmc);
1806 unsigned long flags;
1807
1808 spin_lock_irqsave(&host->lock, flags);
1809 host->flags |= SDHCI_HS400_TUNING;
1810 spin_unlock_irqrestore(&host->lock, flags);
1811
1812 return 0;
1813 }
1814
1815 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
1816 {
1817 struct sdhci_host *host = mmc_priv(mmc);
1818 u16 ctrl;
1819 int tuning_loop_counter = MAX_TUNING_LOOP;
1820 int err = 0;
1821 unsigned long flags;
1822 unsigned int tuning_count = 0;
1823 bool hs400_tuning;
1824
1825 sdhci_runtime_pm_get(host);
1826 spin_lock_irqsave(&host->lock, flags);
1827
1828 hs400_tuning = host->flags & SDHCI_HS400_TUNING;
1829 host->flags &= ~SDHCI_HS400_TUNING;
1830
1831 if (host->tuning_mode == SDHCI_TUNING_MODE_1)
1832 tuning_count = host->tuning_count;
1833
1834 /*
1835 * The Host Controller needs tuning in case of SDR104 and DDR50
1836 * mode, and for SDR50 mode when Use Tuning for SDR50 is set in
1837 * the Capabilities register.
1838 * If the Host Controller supports the HS200 mode then the
1839 * tuning function has to be executed.
1840 */
1841 switch (host->timing) {
1842 /* HS400 tuning is done in HS200 mode */
1843 case MMC_TIMING_MMC_HS400:
1844 err = -EINVAL;
1845 goto out_unlock;
1846
1847 case MMC_TIMING_MMC_HS200:
1848 /*
1849 * Periodic re-tuning for HS400 is not expected to be needed, so
1850 * disable it here.
1851 */
1852 if (hs400_tuning)
1853 tuning_count = 0;
1854 break;
1855
1856 case MMC_TIMING_UHS_SDR104:
1857 case MMC_TIMING_UHS_DDR50:
1858 break;
1859
1860 case MMC_TIMING_UHS_SDR50:
1861 if (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
1862 host->flags & SDHCI_SDR104_NEEDS_TUNING)
1863 break;
1864 /* FALLTHROUGH */
1865
1866 default:
1867 goto out_unlock;
1868 }
1869
1870 if (host->ops->platform_execute_tuning) {
1871 spin_unlock_irqrestore(&host->lock, flags);
1872 err = host->ops->platform_execute_tuning(host, opcode);
1873 sdhci_runtime_pm_put(host);
1874 return err;
1875 }
1876
1877 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1878 ctrl |= SDHCI_CTRL_EXEC_TUNING;
1879 if (host->quirks2 & SDHCI_QUIRK2_TUNING_WORK_AROUND)
1880 ctrl |= SDHCI_CTRL_TUNED_CLK;
1881 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1882
1883 /*
1884 * As per the Host Controller spec v3.00, tuning command
1885 * generates Buffer Read Ready interrupt, so enable that.
1886 *
1887 * Note: The spec clearly says that when tuning sequence
1888 * is being performed, the controller does not generate
1889 * interrupts other than Buffer Read Ready interrupt. But
1890 * to make sure we don't hit a controller bug, we _only_
1891 * enable Buffer Read Ready interrupt here.
1892 */
1893 sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
1894 sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
1895
1896 /*
1897 * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
1898 * of loops reaches 40 times or a timeout of 150ms occurs.
1899 */
1900 do {
1901 struct mmc_command cmd = {0};
1902 struct mmc_request mrq = {NULL};
1903
1904 cmd.opcode = opcode;
1905 cmd.arg = 0;
1906 cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
1907 cmd.retries = 0;
1908 cmd.data = NULL;
1909 cmd.error = 0;
1910
1911 if (tuning_loop_counter-- == 0)
1912 break;
1913
1914 mrq.cmd = &cmd;
1915 host->mrq = &mrq;
1916
1917 /*
1918 * In response to CMD19, the card sends 64 bytes of tuning
1919 * block to the Host Controller. So we set the block size
1920 * to 64 here.
1921 */
1922 if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) {
1923 if (mmc->ios.bus_width == MMC_BUS_WIDTH_8)
1924 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128),
1925 SDHCI_BLOCK_SIZE);
1926 else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
1927 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
1928 SDHCI_BLOCK_SIZE);
1929 } else {
1930 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
1931 SDHCI_BLOCK_SIZE);
1932 }
1933
1934 /*
1935 * The tuning block is sent by the card to the host controller.
1936 * So we set the TRNS_READ bit in the Transfer Mode register.
1937 * This also takes care of setting DMA Enable and Multi Block
1938 * Select in the same register to 0.
1939 */
1940 sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
1941
1942 sdhci_send_command(host, &cmd);
1943
1944 host->cmd = NULL;
1945 host->mrq = NULL;
1946
1947 spin_unlock_irqrestore(&host->lock, flags);
1948 /* Wait for Buffer Read Ready interrupt */
1949 wait_event_interruptible_timeout(host->buf_ready_int,
1950 (host->tuning_done == 1),
1951 msecs_to_jiffies(50));
1952 spin_lock_irqsave(&host->lock, flags);
1953
1954 if (!host->tuning_done) {
1955 pr_info(DRIVER_NAME ": Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n");
1956 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1957 ctrl &= ~SDHCI_CTRL_TUNED_CLK;
1958 ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
1959 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1960
1961 err = -EIO;
1962 goto out;
1963 }
1964
1965 host->tuning_done = 0;
1966
1967 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1968
1969 /* eMMC spec does not require a delay between tuning cycles */
1970 if (opcode == MMC_SEND_TUNING_BLOCK)
1971 mdelay(1);
1972 } while (ctrl & SDHCI_CTRL_EXEC_TUNING);
1973
1974 /*
1975 * The Host Driver has exhausted the maximum number of loops allowed,
1976 * so use fixed sampling frequency.
1977 */
1978 if (tuning_loop_counter < 0) {
1979 ctrl &= ~SDHCI_CTRL_TUNED_CLK;
1980 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1981 }
1982 if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
1983 pr_info(DRIVER_NAME ": Tuning procedure failed, falling back to fixed sampling clock\n");
1984 err = -EIO;
1985 }
1986
1987 out:
1988 if (tuning_count) {
1989 /*
1990 * In case tuning fails, host controllers which support
1991 * re-tuning can try tuning again at a later time, when the
1992 * re-tuning timer expires. So for these controllers, we
1993 * return 0. Since there might be other controllers who do not
1994 * have this capability, we return error for them.
1995 */
1996 err = 0;
1997 }
1998
1999 host->mmc->retune_period = err ? 0 : tuning_count;
2000
2001 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
2002 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
2003 out_unlock:
2004 spin_unlock_irqrestore(&host->lock, flags);
2005 sdhci_runtime_pm_put(host);
2006
2007 return err;
2008 }
2009
2010 static int sdhci_select_drive_strength(struct mmc_card *card,
2011 unsigned int max_dtr, int host_drv,
2012 int card_drv, int *drv_type)
2013 {
2014 struct sdhci_host *host = mmc_priv(card->host);
2015
2016 if (!host->ops->select_drive_strength)
2017 return 0;
2018
2019 return host->ops->select_drive_strength(host, card, max_dtr, host_drv,
2020 card_drv, drv_type);
2021 }
2022
2023 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
2024 {
2025 /* Host Controller v3.00 defines preset value registers */
2026 if (host->version < SDHCI_SPEC_300)
2027 return;
2028
2029 /*
2030 * We only enable or disable Preset Value if they are not already
2031 * enabled or disabled respectively. Otherwise, we bail out.
2032 */
2033 if (host->preset_enabled != enable) {
2034 u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
2035
2036 if (enable)
2037 ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
2038 else
2039 ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
2040
2041 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
2042
2043 if (enable)
2044 host->flags |= SDHCI_PV_ENABLED;
2045 else
2046 host->flags &= ~SDHCI_PV_ENABLED;
2047
2048 host->preset_enabled = enable;
2049 }
2050 }
2051
2052 static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
2053 int err)
2054 {
2055 struct sdhci_host *host = mmc_priv(mmc);
2056 struct mmc_data *data = mrq->data;
2057
2058 if (data->host_cookie != COOKIE_UNMAPPED)
2059 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
2060 data->flags & MMC_DATA_WRITE ?
2061 DMA_TO_DEVICE : DMA_FROM_DEVICE);
2062
2063 data->host_cookie = COOKIE_UNMAPPED;
2064 }
2065
2066 static void sdhci_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
2067 bool is_first_req)
2068 {
2069 struct sdhci_host *host = mmc_priv(mmc);
2070
2071 mrq->data->host_cookie = COOKIE_UNMAPPED;
2072
2073 if (host->flags & SDHCI_REQ_USE_DMA)
2074 sdhci_pre_dma_transfer(host, mrq->data, COOKIE_PRE_MAPPED);
2075 }
2076
2077 static void sdhci_card_event(struct mmc_host *mmc)
2078 {
2079 struct sdhci_host *host = mmc_priv(mmc);
2080 unsigned long flags;
2081 int present;
2082
2083 /* First check if client has provided their own card event */
2084 if (host->ops->card_event)
2085 host->ops->card_event(host);
2086
2087 present = sdhci_do_get_cd(host);
2088
2089 spin_lock_irqsave(&host->lock, flags);
2090
2091 /* Check host->mrq first in case we are runtime suspended */
2092 if (host->mrq && !present) {
2093 pr_err("%s: Card removed during transfer!\n",
2094 mmc_hostname(host->mmc));
2095 pr_err("%s: Resetting controller.\n",
2096 mmc_hostname(host->mmc));
2097
2098 sdhci_do_reset(host, SDHCI_RESET_CMD);
2099 sdhci_do_reset(host, SDHCI_RESET_DATA);
2100
2101 host->mrq->cmd->error = -ENOMEDIUM;
2102 tasklet_schedule(&host->finish_tasklet);
2103 }
2104
2105 spin_unlock_irqrestore(&host->lock, flags);
2106 }
2107
2108 static const struct mmc_host_ops sdhci_ops = {
2109 .request = sdhci_request,
2110 .post_req = sdhci_post_req,
2111 .pre_req = sdhci_pre_req,
2112 .set_ios = sdhci_set_ios,
2113 .get_cd = sdhci_get_cd,
2114 .get_ro = sdhci_get_ro,
2115 .hw_reset = sdhci_hw_reset,
2116 .enable_sdio_irq = sdhci_enable_sdio_irq,
2117 .start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
2118 .prepare_hs400_tuning = sdhci_prepare_hs400_tuning,
2119 .execute_tuning = sdhci_execute_tuning,
2120 .select_drive_strength = sdhci_select_drive_strength,
2121 .card_event = sdhci_card_event,
2122 .card_busy = sdhci_card_busy,
2123 };
2124
2125 /*****************************************************************************\
2126 * *
2127 * Tasklets *
2128 * *
2129 \*****************************************************************************/
2130
2131 static void sdhci_tasklet_finish(unsigned long param)
2132 {
2133 struct sdhci_host *host;
2134 unsigned long flags;
2135 struct mmc_request *mrq;
2136
2137 host = (struct sdhci_host*)param;
2138
2139 spin_lock_irqsave(&host->lock, flags);
2140
2141 /*
2142 * If this tasklet gets rescheduled while running, it will
2143 * be run again afterwards but without any active request.
2144 */
2145 if (!host->mrq) {
2146 spin_unlock_irqrestore(&host->lock, flags);
2147 return;
2148 }
2149
2150 del_timer(&host->timer);
2151
2152 mrq = host->mrq;
2153
2154 /*
2155 * Always unmap the data buffers if they were mapped by
2156 * sdhci_prepare_data() whenever we finish with a request.
2157 * This avoids leaking DMA mappings on error.
2158 */
2159 if (host->flags & SDHCI_REQ_USE_DMA) {
2160 struct mmc_data *data = mrq->data;
2161
2162 if (data && data->host_cookie == COOKIE_MAPPED) {
2163 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
2164 (data->flags & MMC_DATA_READ) ?
2165 DMA_FROM_DEVICE : DMA_TO_DEVICE);
2166 data->host_cookie = COOKIE_UNMAPPED;
2167 }
2168 }
2169
2170 /*
2171 * The controller needs a reset of internal state machines
2172 * upon error conditions.
2173 */
2174 if (!(host->flags & SDHCI_DEVICE_DEAD) &&
2175 ((mrq->cmd && mrq->cmd->error) ||
2176 (mrq->sbc && mrq->sbc->error) ||
2177 (mrq->data && ((mrq->data->error && !mrq->data->stop) ||
2178 (mrq->data->stop && mrq->data->stop->error))) ||
2179 (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
2180
2181 /* Some controllers need this kick or reset won't work here */
2182 if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
2183 /* This is to force an update */
2184 host->ops->set_clock(host, host->clock);
2185
2186 /* Spec says we should do both at the same time, but Ricoh
2187 controllers do not like that. */
2188 sdhci_do_reset(host, SDHCI_RESET_CMD);
2189 sdhci_do_reset(host, SDHCI_RESET_DATA);
2190 }
2191
2192 host->mrq = NULL;
2193 host->cmd = NULL;
2194 host->data = NULL;
2195
2196 #ifndef SDHCI_USE_LEDS_CLASS
2197 sdhci_deactivate_led(host);
2198 #endif
2199
2200 mmiowb();
2201 spin_unlock_irqrestore(&host->lock, flags);
2202
2203 mmc_request_done(host->mmc, mrq);
2204 sdhci_runtime_pm_put(host);
2205 }
2206
2207 static void sdhci_timeout_timer(unsigned long data)
2208 {
2209 struct sdhci_host *host;
2210 unsigned long flags;
2211
2212 host = (struct sdhci_host*)data;
2213
2214 spin_lock_irqsave(&host->lock, flags);
2215
2216 if (host->mrq) {
2217 pr_err("%s: Timeout waiting for hardware interrupt.\n",
2218 mmc_hostname(host->mmc));
2219 sdhci_dumpregs(host);
2220
2221 if (host->data) {
2222 host->data->error = -ETIMEDOUT;
2223 sdhci_finish_data(host);
2224 } else {
2225 if (host->cmd)
2226 host->cmd->error = -ETIMEDOUT;
2227 else
2228 host->mrq->cmd->error = -ETIMEDOUT;
2229
2230 tasklet_schedule(&host->finish_tasklet);
2231 }
2232 }
2233
2234 mmiowb();
2235 spin_unlock_irqrestore(&host->lock, flags);
2236 }
2237
2238 /*****************************************************************************\
2239 * *
2240 * Interrupt handling *
2241 * *
2242 \*****************************************************************************/
2243
2244 static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask)
2245 {
2246 BUG_ON(intmask == 0);
2247
2248 if (!host->cmd) {
2249 pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress.\n",
2250 mmc_hostname(host->mmc), (unsigned)intmask);
2251 sdhci_dumpregs(host);
2252 return;
2253 }
2254
2255 if (intmask & (SDHCI_INT_TIMEOUT | SDHCI_INT_CRC |
2256 SDHCI_INT_END_BIT | SDHCI_INT_INDEX)) {
2257 if (intmask & SDHCI_INT_TIMEOUT)
2258 host->cmd->error = -ETIMEDOUT;
2259 else
2260 host->cmd->error = -EILSEQ;
2261
2262 /*
2263 * If this command initiates a data phase and a response
2264 * CRC error is signalled, the card can start transferring
2265 * data - the card may have received the command without
2266 * error. We must not terminate the mmc_request early.
2267 *
2268 * If the card did not receive the command or returned an
2269 * error which prevented it sending data, the data phase
2270 * will time out.
2271 */
2272 if (host->cmd->data &&
2273 (intmask & (SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)) ==
2274 SDHCI_INT_CRC) {
2275 host->cmd = NULL;
2276 return;
2277 }
2278
2279 tasklet_schedule(&host->finish_tasklet);
2280 return;
2281 }
2282
2283 /*
2284 * The host can send and interrupt when the busy state has
2285 * ended, allowing us to wait without wasting CPU cycles.
2286 * Unfortunately this is overloaded on the "data complete"
2287 * interrupt, so we need to take some care when handling
2288 * it.
2289 *
2290 * Note: The 1.0 specification is a bit ambiguous about this
2291 * feature so there might be some problems with older
2292 * controllers.
2293 */
2294 if (host->cmd->flags & MMC_RSP_BUSY) {
2295 if (host->cmd->data)
2296 DBG("Cannot wait for busy signal when also doing a data transfer");
2297 else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ)
2298 && !host->busy_handle) {
2299 /* Mark that command complete before busy is ended */
2300 host->busy_handle = 1;
2301 return;
2302 }
2303
2304 /* The controller does not support the end-of-busy IRQ,
2305 * fall through and take the SDHCI_INT_RESPONSE */
2306 } else if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) &&
2307 host->cmd->opcode == MMC_STOP_TRANSMISSION && !host->data) {
2308 *mask &= ~SDHCI_INT_DATA_END;
2309 }
2310
2311 if (intmask & SDHCI_INT_RESPONSE)
2312 sdhci_finish_command(host);
2313 }
2314
2315 #ifdef CONFIG_MMC_DEBUG
2316 static void sdhci_adma_show_error(struct sdhci_host *host)
2317 {
2318 const char *name = mmc_hostname(host->mmc);
2319 void *desc = host->adma_table;
2320
2321 sdhci_dumpregs(host);
2322
2323 while (true) {
2324 struct sdhci_adma2_64_desc *dma_desc = desc;
2325
2326 if (host->flags & SDHCI_USE_64_BIT_DMA)
2327 DBG("%s: %p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
2328 name, desc, le32_to_cpu(dma_desc->addr_hi),
2329 le32_to_cpu(dma_desc->addr_lo),
2330 le16_to_cpu(dma_desc->len),
2331 le16_to_cpu(dma_desc->cmd));
2332 else
2333 DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
2334 name, desc, le32_to_cpu(dma_desc->addr_lo),
2335 le16_to_cpu(dma_desc->len),
2336 le16_to_cpu(dma_desc->cmd));
2337
2338 desc += host->desc_sz;
2339
2340 if (dma_desc->cmd & cpu_to_le16(ADMA2_END))
2341 break;
2342 }
2343 }
2344 #else
2345 static void sdhci_adma_show_error(struct sdhci_host *host) { }
2346 #endif
2347
2348 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
2349 {
2350 u32 command;
2351 BUG_ON(intmask == 0);
2352
2353 /* CMD19 generates _only_ Buffer Read Ready interrupt */
2354 if (intmask & SDHCI_INT_DATA_AVAIL) {
2355 command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
2356 if (command == MMC_SEND_TUNING_BLOCK ||
2357 command == MMC_SEND_TUNING_BLOCK_HS200) {
2358 host->tuning_done = 1;
2359 wake_up(&host->buf_ready_int);
2360 return;
2361 }
2362 }
2363
2364 if (!host->data) {
2365 /*
2366 * The "data complete" interrupt is also used to
2367 * indicate that a busy state has ended. See comment
2368 * above in sdhci_cmd_irq().
2369 */
2370 if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
2371 if (intmask & SDHCI_INT_DATA_TIMEOUT) {
2372 host->cmd->error = -ETIMEDOUT;
2373 tasklet_schedule(&host->finish_tasklet);
2374 return;
2375 }
2376 if (intmask & SDHCI_INT_DATA_END) {
2377 /*
2378 * Some cards handle busy-end interrupt
2379 * before the command completed, so make
2380 * sure we do things in the proper order.
2381 */
2382 if (host->busy_handle)
2383 sdhci_finish_command(host);
2384 else
2385 host->busy_handle = 1;
2386 return;
2387 }
2388 }
2389
2390 pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress.\n",
2391 mmc_hostname(host->mmc), (unsigned)intmask);
2392 sdhci_dumpregs(host);
2393
2394 return;
2395 }
2396
2397 if (intmask & SDHCI_INT_DATA_TIMEOUT)
2398 host->data->error = -ETIMEDOUT;
2399 else if (intmask & SDHCI_INT_DATA_END_BIT)
2400 host->data->error = -EILSEQ;
2401 else if ((intmask & SDHCI_INT_DATA_CRC) &&
2402 SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
2403 != MMC_BUS_TEST_R)
2404 host->data->error = -EILSEQ;
2405 else if (intmask & SDHCI_INT_ADMA_ERROR) {
2406 pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
2407 sdhci_adma_show_error(host);
2408 host->data->error = -EIO;
2409 if (host->ops->adma_workaround)
2410 host->ops->adma_workaround(host, intmask);
2411 }
2412
2413 if (host->data->error)
2414 sdhci_finish_data(host);
2415 else {
2416 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
2417 sdhci_transfer_pio(host);
2418
2419 /*
2420 * We currently don't do anything fancy with DMA
2421 * boundaries, but as we can't disable the feature
2422 * we need to at least restart the transfer.
2423 *
2424 * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS)
2425 * should return a valid address to continue from, but as
2426 * some controllers are faulty, don't trust them.
2427 */
2428 if (intmask & SDHCI_INT_DMA_END) {
2429 u32 dmastart, dmanow;
2430 dmastart = sg_dma_address(host->data->sg);
2431 dmanow = dmastart + host->data->bytes_xfered;
2432 /*
2433 * Force update to the next DMA block boundary.
2434 */
2435 dmanow = (dmanow &
2436 ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
2437 SDHCI_DEFAULT_BOUNDARY_SIZE;
2438 host->data->bytes_xfered = dmanow - dmastart;
2439 DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
2440 " next 0x%08x\n",
2441 mmc_hostname(host->mmc), dmastart,
2442 host->data->bytes_xfered, dmanow);
2443 sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
2444 }
2445
2446 if (intmask & SDHCI_INT_DATA_END) {
2447 if (host->cmd) {
2448 /*
2449 * Data managed to finish before the
2450 * command completed. Make sure we do
2451 * things in the proper order.
2452 */
2453 host->data_early = 1;
2454 } else {
2455 sdhci_finish_data(host);
2456 }
2457 }
2458 }
2459 }
2460
2461 static irqreturn_t sdhci_irq(int irq, void *dev_id)
2462 {
2463 irqreturn_t result = IRQ_NONE;
2464 struct sdhci_host *host = dev_id;
2465 u32 intmask, mask, unexpected = 0;
2466 int max_loops = 16;
2467
2468 spin_lock(&host->lock);
2469
2470 if (host->runtime_suspended && !sdhci_sdio_irq_enabled(host)) {
2471 spin_unlock(&host->lock);
2472 return IRQ_NONE;
2473 }
2474
2475 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
2476 if (!intmask || intmask == 0xffffffff) {
2477 result = IRQ_NONE;
2478 goto out;
2479 }
2480
2481 do {
2482 /* Clear selected interrupts. */
2483 mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
2484 SDHCI_INT_BUS_POWER);
2485 sdhci_writel(host, mask, SDHCI_INT_STATUS);
2486
2487 DBG("*** %s got interrupt: 0x%08x\n",
2488 mmc_hostname(host->mmc), intmask);
2489
2490 if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
2491 u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
2492 SDHCI_CARD_PRESENT;
2493
2494 /*
2495 * There is a observation on i.mx esdhc. INSERT
2496 * bit will be immediately set again when it gets
2497 * cleared, if a card is inserted. We have to mask
2498 * the irq to prevent interrupt storm which will
2499 * freeze the system. And the REMOVE gets the
2500 * same situation.
2501 *
2502 * More testing are needed here to ensure it works
2503 * for other platforms though.
2504 */
2505 host->ier &= ~(SDHCI_INT_CARD_INSERT |
2506 SDHCI_INT_CARD_REMOVE);
2507 host->ier |= present ? SDHCI_INT_CARD_REMOVE :
2508 SDHCI_INT_CARD_INSERT;
2509 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
2510 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
2511
2512 sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
2513 SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
2514
2515 host->thread_isr |= intmask & (SDHCI_INT_CARD_INSERT |
2516 SDHCI_INT_CARD_REMOVE);
2517 result = IRQ_WAKE_THREAD;
2518 }
2519
2520 if (intmask & SDHCI_INT_CMD_MASK)
2521 sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK,
2522 &intmask);
2523
2524 if (intmask & SDHCI_INT_DATA_MASK)
2525 sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
2526
2527 if (intmask & SDHCI_INT_BUS_POWER)
2528 pr_err("%s: Card is consuming too much power!\n",
2529 mmc_hostname(host->mmc));
2530
2531 if (intmask & SDHCI_INT_CARD_INT) {
2532 sdhci_enable_sdio_irq_nolock(host, false);
2533 host->thread_isr |= SDHCI_INT_CARD_INT;
2534 result = IRQ_WAKE_THREAD;
2535 }
2536
2537 intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
2538 SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
2539 SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER |
2540 SDHCI_INT_CARD_INT);
2541
2542 if (intmask) {
2543 unexpected |= intmask;
2544 sdhci_writel(host, intmask, SDHCI_INT_STATUS);
2545 }
2546
2547 if (result == IRQ_NONE)
2548 result = IRQ_HANDLED;
2549
2550 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
2551 } while (intmask && --max_loops);
2552 out:
2553 spin_unlock(&host->lock);
2554
2555 if (unexpected) {
2556 pr_err("%s: Unexpected interrupt 0x%08x.\n",
2557 mmc_hostname(host->mmc), unexpected);
2558 sdhci_dumpregs(host);
2559 }
2560
2561 return result;
2562 }
2563
2564 static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
2565 {
2566 struct sdhci_host *host = dev_id;
2567 unsigned long flags;
2568 u32 isr;
2569
2570 spin_lock_irqsave(&host->lock, flags);
2571 isr = host->thread_isr;
2572 host->thread_isr = 0;
2573 spin_unlock_irqrestore(&host->lock, flags);
2574
2575 if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
2576 sdhci_card_event(host->mmc);
2577 mmc_detect_change(host->mmc, msecs_to_jiffies(200));
2578 }
2579
2580 if (isr & SDHCI_INT_CARD_INT) {
2581 sdio_run_irqs(host->mmc);
2582
2583 spin_lock_irqsave(&host->lock, flags);
2584 if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
2585 sdhci_enable_sdio_irq_nolock(host, true);
2586 spin_unlock_irqrestore(&host->lock, flags);
2587 }
2588
2589 return isr ? IRQ_HANDLED : IRQ_NONE;
2590 }
2591
2592 /*****************************************************************************\
2593 * *
2594 * Suspend/resume *
2595 * *
2596 \*****************************************************************************/
2597
2598 #ifdef CONFIG_PM
2599 void sdhci_enable_irq_wakeups(struct sdhci_host *host)
2600 {
2601 u8 val;
2602 u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
2603 | SDHCI_WAKE_ON_INT;
2604
2605 val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
2606 val |= mask ;
2607 /* Avoid fake wake up */
2608 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
2609 val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE);
2610 sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
2611 }
2612 EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
2613
2614 static void sdhci_disable_irq_wakeups(struct sdhci_host *host)
2615 {
2616 u8 val;
2617 u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
2618 | SDHCI_WAKE_ON_INT;
2619
2620 val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
2621 val &= ~mask;
2622 sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
2623 }
2624
2625 int sdhci_suspend_host(struct sdhci_host *host)
2626 {
2627 sdhci_disable_card_detection(host);
2628
2629 mmc_retune_timer_stop(host->mmc);
2630 mmc_retune_needed(host->mmc);
2631
2632 if (!device_may_wakeup(mmc_dev(host->mmc))) {
2633 host->ier = 0;
2634 sdhci_writel(host, 0, SDHCI_INT_ENABLE);
2635 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
2636 free_irq(host->irq, host);
2637 } else {
2638 sdhci_enable_irq_wakeups(host);
2639 enable_irq_wake(host->irq);
2640 }
2641 return 0;
2642 }
2643
2644 EXPORT_SYMBOL_GPL(sdhci_suspend_host);
2645
2646 int sdhci_resume_host(struct sdhci_host *host)
2647 {
2648 int ret = 0;
2649
2650 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2651 if (host->ops->enable_dma)
2652 host->ops->enable_dma(host);
2653 }
2654
2655 if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) &&
2656 (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) {
2657 /* Card keeps power but host controller does not */
2658 sdhci_init(host, 0);
2659 host->pwr = 0;
2660 host->clock = 0;
2661 sdhci_do_set_ios(host, &host->mmc->ios);
2662 } else {
2663 sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
2664 mmiowb();
2665 }
2666
2667 if (!device_may_wakeup(mmc_dev(host->mmc))) {
2668 ret = request_threaded_irq(host->irq, sdhci_irq,
2669 sdhci_thread_irq, IRQF_SHARED,
2670 mmc_hostname(host->mmc), host);
2671 if (ret)
2672 return ret;
2673 } else {
2674 sdhci_disable_irq_wakeups(host);
2675 disable_irq_wake(host->irq);
2676 }
2677
2678 sdhci_enable_card_detection(host);
2679
2680 return ret;
2681 }
2682
2683 EXPORT_SYMBOL_GPL(sdhci_resume_host);
2684
2685 static int sdhci_runtime_pm_get(struct sdhci_host *host)
2686 {
2687 return pm_runtime_get_sync(host->mmc->parent);
2688 }
2689
2690 static int sdhci_runtime_pm_put(struct sdhci_host *host)
2691 {
2692 pm_runtime_mark_last_busy(host->mmc->parent);
2693 return pm_runtime_put_autosuspend(host->mmc->parent);
2694 }
2695
2696 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
2697 {
2698 if (host->bus_on)
2699 return;
2700 host->bus_on = true;
2701 pm_runtime_get_noresume(host->mmc->parent);
2702 }
2703
2704 static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
2705 {
2706 if (!host->bus_on)
2707 return;
2708 host->bus_on = false;
2709 pm_runtime_put_noidle(host->mmc->parent);
2710 }
2711
2712 int sdhci_runtime_suspend_host(struct sdhci_host *host)
2713 {
2714 unsigned long flags;
2715
2716 mmc_retune_timer_stop(host->mmc);
2717 mmc_retune_needed(host->mmc);
2718
2719 spin_lock_irqsave(&host->lock, flags);
2720 host->ier &= SDHCI_INT_CARD_INT;
2721 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
2722 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
2723 spin_unlock_irqrestore(&host->lock, flags);
2724
2725 synchronize_hardirq(host->irq);
2726
2727 spin_lock_irqsave(&host->lock, flags);
2728 host->runtime_suspended = true;
2729 spin_unlock_irqrestore(&host->lock, flags);
2730
2731 return 0;
2732 }
2733 EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host);
2734
2735 int sdhci_runtime_resume_host(struct sdhci_host *host)
2736 {
2737 unsigned long flags;
2738 int host_flags = host->flags;
2739
2740 if (host_flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2741 if (host->ops->enable_dma)
2742 host->ops->enable_dma(host);
2743 }
2744
2745 sdhci_init(host, 0);
2746
2747 /* Force clock and power re-program */
2748 host->pwr = 0;
2749 host->clock = 0;
2750 sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
2751 sdhci_do_set_ios(host, &host->mmc->ios);
2752
2753 if ((host_flags & SDHCI_PV_ENABLED) &&
2754 !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
2755 spin_lock_irqsave(&host->lock, flags);
2756 sdhci_enable_preset_value(host, true);
2757 spin_unlock_irqrestore(&host->lock, flags);
2758 }
2759
2760 spin_lock_irqsave(&host->lock, flags);
2761
2762 host->runtime_suspended = false;
2763
2764 /* Enable SDIO IRQ */
2765 if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
2766 sdhci_enable_sdio_irq_nolock(host, true);
2767
2768 /* Enable Card Detection */
2769 sdhci_enable_card_detection(host);
2770
2771 spin_unlock_irqrestore(&host->lock, flags);
2772
2773 return 0;
2774 }
2775 EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host);
2776
2777 #endif /* CONFIG_PM */
2778
2779 /*****************************************************************************\
2780 * *
2781 * Device allocation/registration *
2782 * *
2783 \*****************************************************************************/
2784
2785 struct sdhci_host *sdhci_alloc_host(struct device *dev,
2786 size_t priv_size)
2787 {
2788 struct mmc_host *mmc;
2789 struct sdhci_host *host;
2790
2791 WARN_ON(dev == NULL);
2792
2793 mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
2794 if (!mmc)
2795 return ERR_PTR(-ENOMEM);
2796
2797 host = mmc_priv(mmc);
2798 host->mmc = mmc;
2799 host->mmc_host_ops = sdhci_ops;
2800 mmc->ops = &host->mmc_host_ops;
2801
2802 return host;
2803 }
2804
2805 EXPORT_SYMBOL_GPL(sdhci_alloc_host);
2806
2807 static int sdhci_set_dma_mask(struct sdhci_host *host)
2808 {
2809 struct mmc_host *mmc = host->mmc;
2810 struct device *dev = mmc_dev(mmc);
2811 int ret = -EINVAL;
2812
2813 if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA)
2814 host->flags &= ~SDHCI_USE_64_BIT_DMA;
2815
2816 /* Try 64-bit mask if hardware is capable of it */
2817 if (host->flags & SDHCI_USE_64_BIT_DMA) {
2818 ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
2819 if (ret) {
2820 pr_warn("%s: Failed to set 64-bit DMA mask.\n",
2821 mmc_hostname(mmc));
2822 host->flags &= ~SDHCI_USE_64_BIT_DMA;
2823 }
2824 }
2825
2826 /* 32-bit mask as default & fallback */
2827 if (ret) {
2828 ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
2829 if (ret)
2830 pr_warn("%s: Failed to set 32-bit DMA mask.\n",
2831 mmc_hostname(mmc));
2832 }
2833
2834 return ret;
2835 }
2836
2837 int sdhci_add_host(struct sdhci_host *host)
2838 {
2839 struct mmc_host *mmc;
2840 u32 caps[2] = {0, 0};
2841 u32 max_current_caps;
2842 unsigned int ocr_avail;
2843 unsigned int override_timeout_clk;
2844 u32 max_clk;
2845 int ret;
2846
2847 WARN_ON(host == NULL);
2848 if (host == NULL)
2849 return -EINVAL;
2850
2851 mmc = host->mmc;
2852
2853 if (debug_quirks)
2854 host->quirks = debug_quirks;
2855 if (debug_quirks2)
2856 host->quirks2 = debug_quirks2;
2857
2858 override_timeout_clk = host->timeout_clk;
2859
2860 sdhci_do_reset(host, SDHCI_RESET_ALL);
2861
2862 host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
2863 host->version = (host->version & SDHCI_SPEC_VER_MASK)
2864 >> SDHCI_SPEC_VER_SHIFT;
2865 if (host->version > SDHCI_SPEC_300) {
2866 pr_err("%s: Unknown controller version (%d). You may experience problems.\n",
2867 mmc_hostname(mmc), host->version);
2868 }
2869
2870 caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
2871 sdhci_readl(host, SDHCI_CAPABILITIES);
2872
2873 if (host->version >= SDHCI_SPEC_300)
2874 caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ?
2875 host->caps1 :
2876 sdhci_readl(host, SDHCI_CAPABILITIES_1);
2877
2878 if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
2879 host->flags |= SDHCI_USE_SDMA;
2880 else if (!(caps[0] & SDHCI_CAN_DO_SDMA))
2881 DBG("Controller doesn't have SDMA capability\n");
2882 else
2883 host->flags |= SDHCI_USE_SDMA;
2884
2885 if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
2886 (host->flags & SDHCI_USE_SDMA)) {
2887 DBG("Disabling DMA as it is marked broken\n");
2888 host->flags &= ~SDHCI_USE_SDMA;
2889 }
2890
2891 if ((host->version >= SDHCI_SPEC_200) &&
2892 (caps[0] & SDHCI_CAN_DO_ADMA2))
2893 host->flags |= SDHCI_USE_ADMA;
2894
2895 if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
2896 (host->flags & SDHCI_USE_ADMA)) {
2897 DBG("Disabling ADMA as it is marked broken\n");
2898 host->flags &= ~SDHCI_USE_ADMA;
2899 }
2900
2901 /*
2902 * It is assumed that a 64-bit capable device has set a 64-bit DMA mask
2903 * and *must* do 64-bit DMA. A driver has the opportunity to change
2904 * that during the first call to ->enable_dma(). Similarly
2905 * SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to
2906 * implement.
2907 */
2908 if (caps[0] & SDHCI_CAN_64BIT)
2909 host->flags |= SDHCI_USE_64_BIT_DMA;
2910
2911 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2912 ret = sdhci_set_dma_mask(host);
2913
2914 if (!ret && host->ops->enable_dma)
2915 ret = host->ops->enable_dma(host);
2916
2917 if (ret) {
2918 pr_warn("%s: No suitable DMA available - falling back to PIO\n",
2919 mmc_hostname(mmc));
2920 host->flags &= ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
2921
2922 ret = 0;
2923 }
2924 }
2925
2926 /* SDMA does not support 64-bit DMA */
2927 if (host->flags & SDHCI_USE_64_BIT_DMA)
2928 host->flags &= ~SDHCI_USE_SDMA;
2929
2930 if (host->flags & SDHCI_USE_ADMA) {
2931 dma_addr_t dma;
2932 void *buf;
2933
2934 /*
2935 * The DMA descriptor table size is calculated as the maximum
2936 * number of segments times 2, to allow for an alignment
2937 * descriptor for each segment, plus 1 for a nop end descriptor,
2938 * all multipled by the descriptor size.
2939 */
2940 if (host->flags & SDHCI_USE_64_BIT_DMA) {
2941 host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
2942 SDHCI_ADMA2_64_DESC_SZ;
2943 host->desc_sz = SDHCI_ADMA2_64_DESC_SZ;
2944 } else {
2945 host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
2946 SDHCI_ADMA2_32_DESC_SZ;
2947 host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
2948 }
2949
2950 host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN;
2951 buf = dma_alloc_coherent(mmc_dev(mmc), host->align_buffer_sz +
2952 host->adma_table_sz, &dma, GFP_KERNEL);
2953 if (!buf) {
2954 pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
2955 mmc_hostname(mmc));
2956 host->flags &= ~SDHCI_USE_ADMA;
2957 } else if ((dma + host->align_buffer_sz) &
2958 (SDHCI_ADMA2_DESC_ALIGN - 1)) {
2959 pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
2960 mmc_hostname(mmc));
2961 host->flags &= ~SDHCI_USE_ADMA;
2962 dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz +
2963 host->adma_table_sz, buf, dma);
2964 } else {
2965 host->align_buffer = buf;
2966 host->align_addr = dma;
2967
2968 host->adma_table = buf + host->align_buffer_sz;
2969 host->adma_addr = dma + host->align_buffer_sz;
2970 }
2971 }
2972
2973 /*
2974 * If we use DMA, then it's up to the caller to set the DMA
2975 * mask, but PIO does not need the hw shim so we set a new
2976 * mask here in that case.
2977 */
2978 if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
2979 host->dma_mask = DMA_BIT_MASK(64);
2980 mmc_dev(mmc)->dma_mask = &host->dma_mask;
2981 }
2982
2983 if (host->version >= SDHCI_SPEC_300)
2984 host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK)
2985 >> SDHCI_CLOCK_BASE_SHIFT;
2986 else
2987 host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK)
2988 >> SDHCI_CLOCK_BASE_SHIFT;
2989
2990 host->max_clk *= 1000000;
2991 if (host->max_clk == 0 || host->quirks &
2992 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
2993 if (!host->ops->get_max_clock) {
2994 pr_err("%s: Hardware doesn't specify base clock frequency.\n",
2995 mmc_hostname(mmc));
2996 return -ENODEV;
2997 }
2998 host->max_clk = host->ops->get_max_clock(host);
2999 }
3000
3001 /*
3002 * In case of Host Controller v3.00, find out whether clock
3003 * multiplier is supported.
3004 */
3005 host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >>
3006 SDHCI_CLOCK_MUL_SHIFT;
3007
3008 /*
3009 * In case the value in Clock Multiplier is 0, then programmable
3010 * clock mode is not supported, otherwise the actual clock
3011 * multiplier is one more than the value of Clock Multiplier
3012 * in the Capabilities Register.
3013 */
3014 if (host->clk_mul)
3015 host->clk_mul += 1;
3016
3017 /*
3018 * Set host parameters.
3019 */
3020 max_clk = host->max_clk;
3021
3022 if (host->ops->get_min_clock)
3023 mmc->f_min = host->ops->get_min_clock(host);
3024 else if (host->version >= SDHCI_SPEC_300) {
3025 if (host->clk_mul) {
3026 mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
3027 max_clk = host->max_clk * host->clk_mul;
3028 } else
3029 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
3030 } else
3031 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
3032
3033 if (!mmc->f_max || (mmc->f_max && (mmc->f_max > max_clk)))
3034 mmc->f_max = max_clk;
3035
3036 if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
3037 host->timeout_clk = (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >>
3038 SDHCI_TIMEOUT_CLK_SHIFT;
3039 if (host->timeout_clk == 0) {
3040 if (host->ops->get_timeout_clock) {
3041 host->timeout_clk =
3042 host->ops->get_timeout_clock(host);
3043 } else {
3044 pr_err("%s: Hardware doesn't specify timeout clock frequency.\n",
3045 mmc_hostname(mmc));
3046 return -ENODEV;
3047 }
3048 }
3049
3050 if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
3051 host->timeout_clk *= 1000;
3052
3053 if (override_timeout_clk)
3054 host->timeout_clk = override_timeout_clk;
3055
3056 mmc->max_busy_timeout = host->ops->get_max_timeout_count ?
3057 host->ops->get_max_timeout_count(host) : 1 << 27;
3058 mmc->max_busy_timeout /= host->timeout_clk;
3059 }
3060
3061 mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
3062 mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
3063
3064 if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
3065 host->flags |= SDHCI_AUTO_CMD12;
3066
3067 /* Auto-CMD23 stuff only works in ADMA or PIO. */
3068 if ((host->version >= SDHCI_SPEC_300) &&
3069 ((host->flags & SDHCI_USE_ADMA) ||
3070 !(host->flags & SDHCI_USE_SDMA)) &&
3071 !(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) {
3072 host->flags |= SDHCI_AUTO_CMD23;
3073 DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc));
3074 } else {
3075 DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc));
3076 }
3077
3078 /*
3079 * A controller may support 8-bit width, but the board itself
3080 * might not have the pins brought out. Boards that support
3081 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
3082 * their platform code before calling sdhci_add_host(), and we
3083 * won't assume 8-bit width for hosts without that CAP.
3084 */
3085 if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
3086 mmc->caps |= MMC_CAP_4_BIT_DATA;
3087
3088 if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
3089 mmc->caps &= ~MMC_CAP_CMD23;
3090
3091 if (caps[0] & SDHCI_CAN_DO_HISPD)
3092 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
3093
3094 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
3095 !(mmc->caps & MMC_CAP_NONREMOVABLE) &&
3096 IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc)))
3097 mmc->caps |= MMC_CAP_NEEDS_POLL;
3098
3099 /* If there are external regulators, get them */
3100 if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER)
3101 return -EPROBE_DEFER;
3102
3103 /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
3104 if (!IS_ERR(mmc->supply.vqmmc)) {
3105 ret = regulator_enable(mmc->supply.vqmmc);
3106 if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
3107 1950000))
3108 caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
3109 SDHCI_SUPPORT_SDR50 |
3110 SDHCI_SUPPORT_DDR50);
3111 if (ret) {
3112 pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
3113 mmc_hostname(mmc), ret);
3114 mmc->supply.vqmmc = ERR_PTR(-EINVAL);
3115 }
3116 }
3117
3118 if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)
3119 caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
3120 SDHCI_SUPPORT_DDR50);
3121
3122 /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
3123 if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
3124 SDHCI_SUPPORT_DDR50))
3125 mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
3126
3127 /* SDR104 supports also implies SDR50 support */
3128 if (caps[1] & SDHCI_SUPPORT_SDR104) {
3129 mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50;
3130 /* SD3.0: SDR104 is supported so (for eMMC) the caps2
3131 * field can be promoted to support HS200.
3132 */
3133 if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
3134 mmc->caps2 |= MMC_CAP2_HS200;
3135 } else if (caps[1] & SDHCI_SUPPORT_SDR50)
3136 mmc->caps |= MMC_CAP_UHS_SDR50;
3137
3138 if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 &&
3139 (caps[1] & SDHCI_SUPPORT_HS400))
3140 mmc->caps2 |= MMC_CAP2_HS400;
3141
3142 if ((mmc->caps2 & MMC_CAP2_HSX00_1_2V) &&
3143 (IS_ERR(mmc->supply.vqmmc) ||
3144 !regulator_is_supported_voltage(mmc->supply.vqmmc, 1100000,
3145 1300000)))
3146 mmc->caps2 &= ~MMC_CAP2_HSX00_1_2V;
3147
3148 if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
3149 !(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
3150 mmc->caps |= MMC_CAP_UHS_DDR50;
3151
3152 /* Does the host need tuning for SDR50? */
3153 if (caps[1] & SDHCI_USE_SDR50_TUNING)
3154 host->flags |= SDHCI_SDR50_NEEDS_TUNING;
3155
3156 /* Does the host need tuning for SDR104 / HS200? */
3157 if (mmc->caps2 & MMC_CAP2_HS200)
3158 host->flags |= SDHCI_SDR104_NEEDS_TUNING;
3159
3160 /* Driver Type(s) (A, C, D) supported by the host */
3161 if (caps[1] & SDHCI_DRIVER_TYPE_A)
3162 mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
3163 if (caps[1] & SDHCI_DRIVER_TYPE_C)
3164 mmc->caps |= MMC_CAP_DRIVER_TYPE_C;
3165 if (caps[1] & SDHCI_DRIVER_TYPE_D)
3166 mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
3167
3168 /* Initial value for re-tuning timer count */
3169 host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
3170 SDHCI_RETUNING_TIMER_COUNT_SHIFT;
3171
3172 /*
3173 * In case Re-tuning Timer is not disabled, the actual value of
3174 * re-tuning timer will be 2 ^ (n - 1).
3175 */
3176 if (host->tuning_count)
3177 host->tuning_count = 1 << (host->tuning_count - 1);
3178
3179 /* Re-tuning mode supported by the Host Controller */
3180 host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >>
3181 SDHCI_RETUNING_MODE_SHIFT;
3182
3183 ocr_avail = 0;
3184
3185 /*
3186 * According to SD Host Controller spec v3.00, if the Host System
3187 * can afford more than 150mA, Host Driver should set XPC to 1. Also
3188 * the value is meaningful only if Voltage Support in the Capabilities
3189 * register is set. The actual current value is 4 times the register
3190 * value.
3191 */
3192 max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
3193 if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
3194 int curr = regulator_get_current_limit(mmc->supply.vmmc);
3195 if (curr > 0) {
3196
3197 /* convert to SDHCI_MAX_CURRENT format */
3198 curr = curr/1000; /* convert to mA */
3199 curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER;
3200
3201 curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT);
3202 max_current_caps =
3203 (curr << SDHCI_MAX_CURRENT_330_SHIFT) |
3204 (curr << SDHCI_MAX_CURRENT_300_SHIFT) |
3205 (curr << SDHCI_MAX_CURRENT_180_SHIFT);
3206 }
3207 }
3208
3209 if (caps[0] & SDHCI_CAN_VDD_330) {
3210 ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
3211
3212 mmc->max_current_330 = ((max_current_caps &
3213 SDHCI_MAX_CURRENT_330_MASK) >>
3214 SDHCI_MAX_CURRENT_330_SHIFT) *
3215 SDHCI_MAX_CURRENT_MULTIPLIER;
3216 }
3217 if (caps[0] & SDHCI_CAN_VDD_300) {
3218 ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
3219
3220 mmc->max_current_300 = ((max_current_caps &
3221 SDHCI_MAX_CURRENT_300_MASK) >>
3222 SDHCI_MAX_CURRENT_300_SHIFT) *
3223 SDHCI_MAX_CURRENT_MULTIPLIER;
3224 }
3225 if (caps[0] & SDHCI_CAN_VDD_180) {
3226 ocr_avail |= MMC_VDD_165_195;
3227
3228 mmc->max_current_180 = ((max_current_caps &
3229 SDHCI_MAX_CURRENT_180_MASK) >>
3230 SDHCI_MAX_CURRENT_180_SHIFT) *
3231 SDHCI_MAX_CURRENT_MULTIPLIER;
3232 }
3233
3234 /* If OCR set by host, use it instead. */
3235 if (host->ocr_mask)
3236 ocr_avail = host->ocr_mask;
3237
3238 /* If OCR set by external regulators, give it highest prio. */
3239 if (mmc->ocr_avail)
3240 ocr_avail = mmc->ocr_avail;
3241
3242 mmc->ocr_avail = ocr_avail;
3243 mmc->ocr_avail_sdio = ocr_avail;
3244 if (host->ocr_avail_sdio)
3245 mmc->ocr_avail_sdio &= host->ocr_avail_sdio;
3246 mmc->ocr_avail_sd = ocr_avail;
3247 if (host->ocr_avail_sd)
3248 mmc->ocr_avail_sd &= host->ocr_avail_sd;
3249 else /* normal SD controllers don't support 1.8V */
3250 mmc->ocr_avail_sd &= ~MMC_VDD_165_195;
3251 mmc->ocr_avail_mmc = ocr_avail;
3252 if (host->ocr_avail_mmc)
3253 mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
3254
3255 if (mmc->ocr_avail == 0) {
3256 pr_err("%s: Hardware doesn't report any support voltages.\n",
3257 mmc_hostname(mmc));
3258 return -ENODEV;
3259 }
3260
3261 spin_lock_init(&host->lock);
3262
3263 /*
3264 * Maximum number of segments. Depends on if the hardware
3265 * can do scatter/gather or not.
3266 */
3267 if (host->flags & SDHCI_USE_ADMA)
3268 mmc->max_segs = SDHCI_MAX_SEGS;
3269 else if (host->flags & SDHCI_USE_SDMA)
3270 mmc->max_segs = 1;
3271 else /* PIO */
3272 mmc->max_segs = SDHCI_MAX_SEGS;
3273
3274 /*
3275 * Maximum number of sectors in one transfer. Limited by SDMA boundary
3276 * size (512KiB). Note some tuning modes impose a 4MiB limit, but this
3277 * is less anyway.
3278 */
3279 mmc->max_req_size = 524288;
3280
3281 /*
3282 * Maximum segment size. Could be one segment with the maximum number
3283 * of bytes. When doing hardware scatter/gather, each entry cannot
3284 * be larger than 64 KiB though.
3285 */
3286 if (host->flags & SDHCI_USE_ADMA) {
3287 if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC)
3288 mmc->max_seg_size = 65535;
3289 else
3290 mmc->max_seg_size = 65536;
3291 } else {
3292 mmc->max_seg_size = mmc->max_req_size;
3293 }
3294
3295 /*
3296 * Maximum block size. This varies from controller to controller and
3297 * is specified in the capabilities register.
3298 */
3299 if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
3300 mmc->max_blk_size = 2;
3301 } else {
3302 mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
3303 SDHCI_MAX_BLOCK_SHIFT;
3304 if (mmc->max_blk_size >= 3) {
3305 pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
3306 mmc_hostname(mmc));
3307 mmc->max_blk_size = 0;
3308 }
3309 }
3310
3311 mmc->max_blk_size = 512 << mmc->max_blk_size;
3312
3313 /*
3314 * Maximum block count.
3315 */
3316 mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
3317
3318 /*
3319 * Init tasklets.
3320 */
3321 tasklet_init(&host->finish_tasklet,
3322 sdhci_tasklet_finish, (unsigned long)host);
3323
3324 setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
3325
3326 init_waitqueue_head(&host->buf_ready_int);
3327
3328 sdhci_init(host, 0);
3329
3330 ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq,
3331 IRQF_SHARED, mmc_hostname(mmc), host);
3332 if (ret) {
3333 pr_err("%s: Failed to request IRQ %d: %d\n",
3334 mmc_hostname(mmc), host->irq, ret);
3335 goto untasklet;
3336 }
3337
3338 #ifdef CONFIG_MMC_DEBUG
3339 sdhci_dumpregs(host);
3340 #endif
3341
3342 #ifdef SDHCI_USE_LEDS_CLASS
3343 snprintf(host->led_name, sizeof(host->led_name),
3344 "%s::", mmc_hostname(mmc));
3345 host->led.name = host->led_name;
3346 host->led.brightness = LED_OFF;
3347 host->led.default_trigger = mmc_hostname(mmc);
3348 host->led.brightness_set = sdhci_led_control;
3349
3350 ret = led_classdev_register(mmc_dev(mmc), &host->led);
3351 if (ret) {
3352 pr_err("%s: Failed to register LED device: %d\n",
3353 mmc_hostname(mmc), ret);
3354 goto reset;
3355 }
3356 #endif
3357
3358 mmiowb();
3359
3360 mmc_add_host(mmc);
3361
3362 pr_info("%s: SDHCI controller on %s [%s] using %s\n",
3363 mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
3364 (host->flags & SDHCI_USE_ADMA) ?
3365 (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" :
3366 (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
3367
3368 sdhci_enable_card_detection(host);
3369
3370 return 0;
3371
3372 #ifdef SDHCI_USE_LEDS_CLASS
3373 reset:
3374 sdhci_do_reset(host, SDHCI_RESET_ALL);
3375 sdhci_writel(host, 0, SDHCI_INT_ENABLE);
3376 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
3377 free_irq(host->irq, host);
3378 #endif
3379 untasklet:
3380 tasklet_kill(&host->finish_tasklet);
3381
3382 return ret;
3383 }
3384
3385 EXPORT_SYMBOL_GPL(sdhci_add_host);
3386
3387 void sdhci_remove_host(struct sdhci_host *host, int dead)
3388 {
3389 struct mmc_host *mmc = host->mmc;
3390 unsigned long flags;
3391
3392 if (dead) {
3393 spin_lock_irqsave(&host->lock, flags);
3394
3395 host->flags |= SDHCI_DEVICE_DEAD;
3396
3397 if (host->mrq) {
3398 pr_err("%s: Controller removed during "
3399 " transfer!\n", mmc_hostname(mmc));
3400
3401 host->mrq->cmd->error = -ENOMEDIUM;
3402 tasklet_schedule(&host->finish_tasklet);
3403 }
3404
3405 spin_unlock_irqrestore(&host->lock, flags);
3406 }
3407
3408 sdhci_disable_card_detection(host);
3409
3410 mmc_remove_host(mmc);
3411
3412 #ifdef SDHCI_USE_LEDS_CLASS
3413 led_classdev_unregister(&host->led);
3414 #endif
3415
3416 if (!dead)
3417 sdhci_do_reset(host, SDHCI_RESET_ALL);
3418
3419 sdhci_writel(host, 0, SDHCI_INT_ENABLE);
3420 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
3421 free_irq(host->irq, host);
3422
3423 del_timer_sync(&host->timer);
3424
3425 tasklet_kill(&host->finish_tasklet);
3426
3427 if (!IS_ERR(mmc->supply.vqmmc))
3428 regulator_disable(mmc->supply.vqmmc);
3429
3430 if (host->align_buffer)
3431 dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz +
3432 host->adma_table_sz, host->align_buffer,
3433 host->align_addr);
3434
3435 host->adma_table = NULL;
3436 host->align_buffer = NULL;
3437 }
3438
3439 EXPORT_SYMBOL_GPL(sdhci_remove_host);
3440
3441 void sdhci_free_host(struct sdhci_host *host)
3442 {
3443 mmc_free_host(host->mmc);
3444 }
3445
3446 EXPORT_SYMBOL_GPL(sdhci_free_host);
3447
3448 /*****************************************************************************\
3449 * *
3450 * Driver init/exit *
3451 * *
3452 \*****************************************************************************/
3453
3454 static int __init sdhci_drv_init(void)
3455 {
3456 pr_info(DRIVER_NAME
3457 ": Secure Digital Host Controller Interface driver\n");
3458 pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
3459
3460 return 0;
3461 }
3462
3463 static void __exit sdhci_drv_exit(void)
3464 {
3465 }
3466
3467 module_init(sdhci_drv_init);
3468 module_exit(sdhci_drv_exit);
3469
3470 module_param(debug_quirks, uint, 0444);
3471 module_param(debug_quirks2, uint, 0444);
3472
3473 MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
3474 MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
3475 MODULE_LICENSE("GPL");
3476
3477 MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
3478 MODULE_PARM_DESC(debug_quirks2, "Force certain other quirks.");
Ubuntu Hirsute Linux kernel mirror