]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blob - drivers/mmc/host/sdhci.c
projects / mirror_ubuntu-zesty-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
[mirror_ubuntu-zesty-kernel.git] / drivers / mmc / host / sdhci.c
1 /*
2 * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
3 *
4 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
10 *
11 * Thanks to the following companies for their support:
12 *
13 * - JMicron (hardware and technical support)
14 */
15
16 #include <linux/delay.h>
17 #include <linux/highmem.h>
18 #include <linux/io.h>
19 #include <linux/module.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/slab.h>
22 #include <linux/scatterlist.h>
23 #include <linux/regulator/consumer.h>
24 #include <linux/pm_runtime.h>
25
26 #include <linux/leds.h>
27
28 #include <linux/mmc/mmc.h>
29 #include <linux/mmc/host.h>
30 #include <linux/mmc/card.h>
31 #include <linux/mmc/sdio.h>
32 #include <linux/mmc/slot-gpio.h>
33
34 #include "sdhci.h"
35
36 #define DRIVER_NAME "sdhci"
37
38 #define DBG(f, x...) \
39 pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
40
41 #if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
42 defined(CONFIG_MMC_SDHCI_MODULE))
43 #define SDHCI_USE_LEDS_CLASS
44 #endif
45
46 #define MAX_TUNING_LOOP 40
47
48 static unsigned int debug_quirks = 0;
49 static unsigned int debug_quirks2;
50
51 static void sdhci_finish_data(struct sdhci_host *);
52
53 static void sdhci_finish_command(struct sdhci_host *);
54 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
55 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
56 static int sdhci_pre_dma_transfer(struct sdhci_host *host,
57 struct mmc_data *data);
58 static int sdhci_do_get_cd(struct sdhci_host *host);
59
60 #ifdef CONFIG_PM
61 static int sdhci_runtime_pm_get(struct sdhci_host *host);
62 static int sdhci_runtime_pm_put(struct sdhci_host *host);
63 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
64 static void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
65 #else
66 static inline int sdhci_runtime_pm_get(struct sdhci_host *host)
67 {
68 return 0;
69 }
70 static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
71 {
72 return 0;
73 }
74 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
75 {
76 }
77 static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
78 {
79 }
80 #endif
81
82 static void sdhci_dumpregs(struct sdhci_host *host)
83 {
84 pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
85 mmc_hostname(host->mmc));
86
87 pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
88 sdhci_readl(host, SDHCI_DMA_ADDRESS),
89 sdhci_readw(host, SDHCI_HOST_VERSION));
90 pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
91 sdhci_readw(host, SDHCI_BLOCK_SIZE),
92 sdhci_readw(host, SDHCI_BLOCK_COUNT));
93 pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
94 sdhci_readl(host, SDHCI_ARGUMENT),
95 sdhci_readw(host, SDHCI_TRANSFER_MODE));
96 pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
97 sdhci_readl(host, SDHCI_PRESENT_STATE),
98 sdhci_readb(host, SDHCI_HOST_CONTROL));
99 pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
100 sdhci_readb(host, SDHCI_POWER_CONTROL),
101 sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
102 pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
103 sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
104 sdhci_readw(host, SDHCI_CLOCK_CONTROL));
105 pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
106 sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
107 sdhci_readl(host, SDHCI_INT_STATUS));
108 pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
109 sdhci_readl(host, SDHCI_INT_ENABLE),
110 sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
111 pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
112 sdhci_readw(host, SDHCI_ACMD12_ERR),
113 sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
114 pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
115 sdhci_readl(host, SDHCI_CAPABILITIES),
116 sdhci_readl(host, SDHCI_CAPABILITIES_1));
117 pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
118 sdhci_readw(host, SDHCI_COMMAND),
119 sdhci_readl(host, SDHCI_MAX_CURRENT));
120 pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
121 sdhci_readw(host, SDHCI_HOST_CONTROL2));
122
123 if (host->flags & SDHCI_USE_ADMA) {
124 if (host->flags & SDHCI_USE_64_BIT_DMA)
125 pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n",
126 readl(host->ioaddr + SDHCI_ADMA_ERROR),
127 readl(host->ioaddr + SDHCI_ADMA_ADDRESS_HI),
128 readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
129 else
130 pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
131 readl(host->ioaddr + SDHCI_ADMA_ERROR),
132 readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
133 }
134
135 pr_debug(DRIVER_NAME ": ===========================================\n");
136 }
137
138 /*****************************************************************************\
139 * *
140 * Low level functions *
141 * *
142 \*****************************************************************************/
143
144 static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
145 {
146 u32 present;
147
148 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
149 (host->mmc->caps & MMC_CAP_NONREMOVABLE))
150 return;
151
152 if (enable) {
153 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
154 SDHCI_CARD_PRESENT;
155
156 host->ier |= present ? SDHCI_INT_CARD_REMOVE :
157 SDHCI_INT_CARD_INSERT;
158 } else {
159 host->ier &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
160 }
161
162 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
163 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
164 }
165
166 static void sdhci_enable_card_detection(struct sdhci_host *host)
167 {
168 sdhci_set_card_detection(host, true);
169 }
170
171 static void sdhci_disable_card_detection(struct sdhci_host *host)
172 {
173 sdhci_set_card_detection(host, false);
174 }
175
176 void sdhci_reset(struct sdhci_host *host, u8 mask)
177 {
178 unsigned long timeout;
179
180 sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
181
182 if (mask & SDHCI_RESET_ALL) {
183 host->clock = 0;
184 /* Reset-all turns off SD Bus Power */
185 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
186 sdhci_runtime_pm_bus_off(host);
187 }
188
189 /* Wait max 100 ms */
190 timeout = 100;
191
192 /* hw clears the bit when it's done */
193 while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
194 if (timeout == 0) {
195 pr_err("%s: Reset 0x%x never completed.\n",
196 mmc_hostname(host->mmc), (int)mask);
197 sdhci_dumpregs(host);
198 return;
199 }
200 timeout--;
201 mdelay(1);
202 }
203 }
204 EXPORT_SYMBOL_GPL(sdhci_reset);
205
206 static void sdhci_do_reset(struct sdhci_host *host, u8 mask)
207 {
208 if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
209 if (!sdhci_do_get_cd(host))
210 return;
211 }
212
213 host->ops->reset(host, mask);
214
215 if (mask & SDHCI_RESET_ALL) {
216 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
217 if (host->ops->enable_dma)
218 host->ops->enable_dma(host);
219 }
220
221 /* Resetting the controller clears many */
222 host->preset_enabled = false;
223 }
224 }
225
226 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
227
228 static void sdhci_init(struct sdhci_host *host, int soft)
229 {
230 if (soft)
231 sdhci_do_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
232 else
233 sdhci_do_reset(host, SDHCI_RESET_ALL);
234
235 host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
236 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT |
237 SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC |
238 SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END |
239 SDHCI_INT_RESPONSE;
240
241 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
242 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
243
244 if (soft) {
245 /* force clock reconfiguration */
246 host->clock = 0;
247 sdhci_set_ios(host->mmc, &host->mmc->ios);
248 }
249 }
250
251 static void sdhci_reinit(struct sdhci_host *host)
252 {
253 sdhci_init(host, 0);
254 sdhci_enable_card_detection(host);
255 }
256
257 static void sdhci_activate_led(struct sdhci_host *host)
258 {
259 u8 ctrl;
260
261 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
262 ctrl |= SDHCI_CTRL_LED;
263 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
264 }
265
266 static void sdhci_deactivate_led(struct sdhci_host *host)
267 {
268 u8 ctrl;
269
270 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
271 ctrl &= ~SDHCI_CTRL_LED;
272 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
273 }
274
275 #ifdef SDHCI_USE_LEDS_CLASS
276 static void sdhci_led_control(struct led_classdev *led,
277 enum led_brightness brightness)
278 {
279 struct sdhci_host *host = container_of(led, struct sdhci_host, led);
280 unsigned long flags;
281
282 spin_lock_irqsave(&host->lock, flags);
283
284 if (host->runtime_suspended)
285 goto out;
286
287 if (brightness == LED_OFF)
288 sdhci_deactivate_led(host);
289 else
290 sdhci_activate_led(host);
291 out:
292 spin_unlock_irqrestore(&host->lock, flags);
293 }
294 #endif
295
296 /*****************************************************************************\
297 * *
298 * Core functions *
299 * *
300 \*****************************************************************************/
301
302 static void sdhci_read_block_pio(struct sdhci_host *host)
303 {
304 unsigned long flags;
305 size_t blksize, len, chunk;
306 u32 uninitialized_var(scratch);
307 u8 *buf;
308
309 DBG("PIO reading\n");
310
311 blksize = host->data->blksz;
312 chunk = 0;
313
314 local_irq_save(flags);
315
316 while (blksize) {
317 BUG_ON(!sg_miter_next(&host->sg_miter));
318
319 len = min(host->sg_miter.length, blksize);
320
321 blksize -= len;
322 host->sg_miter.consumed = len;
323
324 buf = host->sg_miter.addr;
325
326 while (len) {
327 if (chunk == 0) {
328 scratch = sdhci_readl(host, SDHCI_BUFFER);
329 chunk = 4;
330 }
331
332 *buf = scratch & 0xFF;
333
334 buf++;
335 scratch >>= 8;
336 chunk--;
337 len--;
338 }
339 }
340
341 sg_miter_stop(&host->sg_miter);
342
343 local_irq_restore(flags);
344 }
345
346 static void sdhci_write_block_pio(struct sdhci_host *host)
347 {
348 unsigned long flags;
349 size_t blksize, len, chunk;
350 u32 scratch;
351 u8 *buf;
352
353 DBG("PIO writing\n");
354
355 blksize = host->data->blksz;
356 chunk = 0;
357 scratch = 0;
358
359 local_irq_save(flags);
360
361 while (blksize) {
362 BUG_ON(!sg_miter_next(&host->sg_miter));
363
364 len = min(host->sg_miter.length, blksize);
365
366 blksize -= len;
367 host->sg_miter.consumed = len;
368
369 buf = host->sg_miter.addr;
370
371 while (len) {
372 scratch |= (u32)*buf << (chunk * 8);
373
374 buf++;
375 chunk++;
376 len--;
377
378 if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
379 sdhci_writel(host, scratch, SDHCI_BUFFER);
380 chunk = 0;
381 scratch = 0;
382 }
383 }
384 }
385
386 sg_miter_stop(&host->sg_miter);
387
388 local_irq_restore(flags);
389 }
390
391 static void sdhci_transfer_pio(struct sdhci_host *host)
392 {
393 u32 mask;
394
395 BUG_ON(!host->data);
396
397 if (host->blocks == 0)
398 return;
399
400 if (host->data->flags & MMC_DATA_READ)
401 mask = SDHCI_DATA_AVAILABLE;
402 else
403 mask = SDHCI_SPACE_AVAILABLE;
404
405 /*
406 * Some controllers (JMicron JMB38x) mess up the buffer bits
407 * for transfers < 4 bytes. As long as it is just one block,
408 * we can ignore the bits.
409 */
410 if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
411 (host->data->blocks == 1))
412 mask = ~0;
413
414 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
415 if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
416 udelay(100);
417
418 if (host->data->flags & MMC_DATA_READ)
419 sdhci_read_block_pio(host);
420 else
421 sdhci_write_block_pio(host);
422
423 host->blocks--;
424 if (host->blocks == 0)
425 break;
426 }
427
428 DBG("PIO transfer complete.\n");
429 }
430
431 static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
432 {
433 local_irq_save(*flags);
434 return kmap_atomic(sg_page(sg)) + sg->offset;
435 }
436
437 static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
438 {
439 kunmap_atomic(buffer);
440 local_irq_restore(*flags);
441 }
442
443 static void sdhci_adma_write_desc(struct sdhci_host *host, void *desc,
444 dma_addr_t addr, int len, unsigned cmd)
445 {
446 struct sdhci_adma2_64_desc *dma_desc = desc;
447
448 /* 32-bit and 64-bit descriptors have these members in same position */
449 dma_desc->cmd = cpu_to_le16(cmd);
450 dma_desc->len = cpu_to_le16(len);
451 dma_desc->addr_lo = cpu_to_le32((u32)addr);
452
453 if (host->flags & SDHCI_USE_64_BIT_DMA)
454 dma_desc->addr_hi = cpu_to_le32((u64)addr >> 32);
455 }
456
457 static void sdhci_adma_mark_end(void *desc)
458 {
459 struct sdhci_adma2_64_desc *dma_desc = desc;
460
461 /* 32-bit and 64-bit descriptors have 'cmd' in same position */
462 dma_desc->cmd |= cpu_to_le16(ADMA2_END);
463 }
464
465 static int sdhci_adma_table_pre(struct sdhci_host *host,
466 struct mmc_data *data)
467 {
468 int direction;
469
470 void *desc;
471 void *align;
472 dma_addr_t addr;
473 dma_addr_t align_addr;
474 int len, offset;
475
476 struct scatterlist *sg;
477 int i;
478 char *buffer;
479 unsigned long flags;
480
481 /*
482 * The spec does not specify endianness of descriptor table.
483 * We currently guess that it is LE.
484 */
485
486 if (data->flags & MMC_DATA_READ)
487 direction = DMA_FROM_DEVICE;
488 else
489 direction = DMA_TO_DEVICE;
490
491 host->align_addr = dma_map_single(mmc_dev(host->mmc),
492 host->align_buffer, host->align_buffer_sz, direction);
493 if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
494 goto fail;
495 BUG_ON(host->align_addr & host->align_mask);
496
497 host->sg_count = sdhci_pre_dma_transfer(host, data);
498 if (host->sg_count < 0)
499 goto unmap_align;
500
501 desc = host->adma_table;
502 align = host->align_buffer;
503
504 align_addr = host->align_addr;
505
506 for_each_sg(data->sg, sg, host->sg_count, i) {
507 addr = sg_dma_address(sg);
508 len = sg_dma_len(sg);
509
510 /*
511 * The SDHCI specification states that ADMA
512 * addresses must be 32-bit aligned. If they
513 * aren't, then we use a bounce buffer for
514 * the (up to three) bytes that screw up the
515 * alignment.
516 */
517 offset = (host->align_sz - (addr & host->align_mask)) &
518 host->align_mask;
519 if (offset) {
520 if (data->flags & MMC_DATA_WRITE) {
521 buffer = sdhci_kmap_atomic(sg, &flags);
522 memcpy(align, buffer, offset);
523 sdhci_kunmap_atomic(buffer, &flags);
524 }
525
526 /* tran, valid */
527 sdhci_adma_write_desc(host, desc, align_addr, offset,
528 ADMA2_TRAN_VALID);
529
530 BUG_ON(offset > 65536);
531
532 align += host->align_sz;
533 align_addr += host->align_sz;
534
535 desc += host->desc_sz;
536
537 addr += offset;
538 len -= offset;
539 }
540
541 BUG_ON(len > 65536);
542
543 /* tran, valid */
544 sdhci_adma_write_desc(host, desc, addr, len, ADMA2_TRAN_VALID);
545 desc += host->desc_sz;
546
547 /*
548 * If this triggers then we have a calculation bug
549 * somewhere. :/
550 */
551 WARN_ON((desc - host->adma_table) >= host->adma_table_sz);
552 }
553
554 if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
555 /*
556 * Mark the last descriptor as the terminating descriptor
557 */
558 if (desc != host->adma_table) {
559 desc -= host->desc_sz;
560 sdhci_adma_mark_end(desc);
561 }
562 } else {
563 /*
564 * Add a terminating entry.
565 */
566
567 /* nop, end, valid */
568 sdhci_adma_write_desc(host, desc, 0, 0, ADMA2_NOP_END_VALID);
569 }
570
571 /*
572 * Resync align buffer as we might have changed it.
573 */
574 if (data->flags & MMC_DATA_WRITE) {
575 dma_sync_single_for_device(mmc_dev(host->mmc),
576 host->align_addr, host->align_buffer_sz, direction);
577 }
578
579 return 0;
580
581 unmap_align:
582 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
583 host->align_buffer_sz, direction);
584 fail:
585 return -EINVAL;
586 }
587
588 static void sdhci_adma_table_post(struct sdhci_host *host,
589 struct mmc_data *data)
590 {
591 int direction;
592
593 struct scatterlist *sg;
594 int i, size;
595 void *align;
596 char *buffer;
597 unsigned long flags;
598 bool has_unaligned;
599
600 if (data->flags & MMC_DATA_READ)
601 direction = DMA_FROM_DEVICE;
602 else
603 direction = DMA_TO_DEVICE;
604
605 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
606 host->align_buffer_sz, direction);
607
608 /* Do a quick scan of the SG list for any unaligned mappings */
609 has_unaligned = false;
610 for_each_sg(data->sg, sg, host->sg_count, i)
611 if (sg_dma_address(sg) & host->align_mask) {
612 has_unaligned = true;
613 break;
614 }
615
616 if (has_unaligned && data->flags & MMC_DATA_READ) {
617 dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
618 data->sg_len, direction);
619
620 align = host->align_buffer;
621
622 for_each_sg(data->sg, sg, host->sg_count, i) {
623 if (sg_dma_address(sg) & host->align_mask) {
624 size = host->align_sz -
625 (sg_dma_address(sg) & host->align_mask);
626
627 buffer = sdhci_kmap_atomic(sg, &flags);
628 memcpy(buffer, align, size);
629 sdhci_kunmap_atomic(buffer, &flags);
630
631 align += host->align_sz;
632 }
633 }
634 }
635
636 if (data->host_cookie == COOKIE_MAPPED) {
637 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
638 data->sg_len, direction);
639 data->host_cookie = COOKIE_UNMAPPED;
640 }
641 }
642
643 static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
644 {
645 u8 count;
646 struct mmc_data *data = cmd->data;
647 unsigned target_timeout, current_timeout;
648
649 /*
650 * If the host controller provides us with an incorrect timeout
651 * value, just skip the check and use 0xE. The hardware may take
652 * longer to time out, but that's much better than having a too-short
653 * timeout value.
654 */
655 if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
656 return 0xE;
657
658 /* Unspecified timeout, assume max */
659 if (!data && !cmd->busy_timeout)
660 return 0xE;
661
662 /* timeout in us */
663 if (!data)
664 target_timeout = cmd->busy_timeout * 1000;
665 else {
666 target_timeout = data->timeout_ns / 1000;
667 if (host->clock)
668 target_timeout += data->timeout_clks / host->clock;
669 }
670
671 /*
672 * Figure out needed cycles.
673 * We do this in steps in order to fit inside a 32 bit int.
674 * The first step is the minimum timeout, which will have a
675 * minimum resolution of 6 bits:
676 * (1) 2^13*1000 > 2^22,
677 * (2) host->timeout_clk < 2^16
678 * =>
679 * (1) / (2) > 2^6
680 */
681 count = 0;
682 current_timeout = (1 << 13) * 1000 / host->timeout_clk;
683 while (current_timeout < target_timeout) {
684 count++;
685 current_timeout <<= 1;
686 if (count >= 0xF)
687 break;
688 }
689
690 if (count >= 0xF) {
691 DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
692 mmc_hostname(host->mmc), count, cmd->opcode);
693 count = 0xE;
694 }
695
696 return count;
697 }
698
699 static void sdhci_set_transfer_irqs(struct sdhci_host *host)
700 {
701 u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
702 u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
703
704 if (host->flags & SDHCI_REQ_USE_DMA)
705 host->ier = (host->ier & ~pio_irqs) | dma_irqs;
706 else
707 host->ier = (host->ier & ~dma_irqs) | pio_irqs;
708
709 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
710 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
711 }
712
713 static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
714 {
715 u8 count;
716
717 if (host->ops->set_timeout) {
718 host->ops->set_timeout(host, cmd);
719 } else {
720 count = sdhci_calc_timeout(host, cmd);
721 sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
722 }
723 }
724
725 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
726 {
727 u8 ctrl;
728 struct mmc_data *data = cmd->data;
729 int ret;
730
731 WARN_ON(host->data);
732
733 if (data || (cmd->flags & MMC_RSP_BUSY))
734 sdhci_set_timeout(host, cmd);
735
736 if (!data)
737 return;
738
739 /* Sanity checks */
740 BUG_ON(data->blksz * data->blocks > 524288);
741 BUG_ON(data->blksz > host->mmc->max_blk_size);
742 BUG_ON(data->blocks > 65535);
743
744 host->data = data;
745 host->data_early = 0;
746 host->data->bytes_xfered = 0;
747
748 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
749 host->flags |= SDHCI_REQ_USE_DMA;
750
751 /*
752 * FIXME: This doesn't account for merging when mapping the
753 * scatterlist.
754 */
755 if (host->flags & SDHCI_REQ_USE_DMA) {
756 int broken, i;
757 struct scatterlist *sg;
758
759 broken = 0;
760 if (host->flags & SDHCI_USE_ADMA) {
761 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
762 broken = 1;
763 } else {
764 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
765 broken = 1;
766 }
767
768 if (unlikely(broken)) {
769 for_each_sg(data->sg, sg, data->sg_len, i) {
770 if (sg->length & 0x3) {
771 DBG("Reverting to PIO because of "
772 "transfer size (%d)\n",
773 sg->length);
774 host->flags &= ~SDHCI_REQ_USE_DMA;
775 break;
776 }
777 }
778 }
779 }
780
781 /*
782 * The assumption here being that alignment is the same after
783 * translation to device address space.
784 */
785 if (host->flags & SDHCI_REQ_USE_DMA) {
786 int broken, i;
787 struct scatterlist *sg;
788
789 broken = 0;
790 if (host->flags & SDHCI_USE_ADMA) {
791 /*
792 * As we use 3 byte chunks to work around
793 * alignment problems, we need to check this
794 * quirk.
795 */
796 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
797 broken = 1;
798 } else {
799 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
800 broken = 1;
801 }
802
803 if (unlikely(broken)) {
804 for_each_sg(data->sg, sg, data->sg_len, i) {
805 if (sg->offset & 0x3) {
806 DBG("Reverting to PIO because of "
807 "bad alignment\n");
808 host->flags &= ~SDHCI_REQ_USE_DMA;
809 break;
810 }
811 }
812 }
813 }
814
815 if (host->flags & SDHCI_REQ_USE_DMA) {
816 if (host->flags & SDHCI_USE_ADMA) {
817 ret = sdhci_adma_table_pre(host, data);
818 if (ret) {
819 /*
820 * This only happens when someone fed
821 * us an invalid request.
822 */
823 WARN_ON(1);
824 host->flags &= ~SDHCI_REQ_USE_DMA;
825 } else {
826 sdhci_writel(host, host->adma_addr,
827 SDHCI_ADMA_ADDRESS);
828 if (host->flags & SDHCI_USE_64_BIT_DMA)
829 sdhci_writel(host,
830 (u64)host->adma_addr >> 32,
831 SDHCI_ADMA_ADDRESS_HI);
832 }
833 } else {
834 int sg_cnt;
835
836 sg_cnt = sdhci_pre_dma_transfer(host, data);
837 if (sg_cnt <= 0) {
838 /*
839 * This only happens when someone fed
840 * us an invalid request.
841 */
842 WARN_ON(1);
843 host->flags &= ~SDHCI_REQ_USE_DMA;
844 } else {
845 WARN_ON(sg_cnt != 1);
846 sdhci_writel(host, sg_dma_address(data->sg),
847 SDHCI_DMA_ADDRESS);
848 }
849 }
850 }
851
852 /*
853 * Always adjust the DMA selection as some controllers
854 * (e.g. JMicron) can't do PIO properly when the selection
855 * is ADMA.
856 */
857 if (host->version >= SDHCI_SPEC_200) {
858 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
859 ctrl &= ~SDHCI_CTRL_DMA_MASK;
860 if ((host->flags & SDHCI_REQ_USE_DMA) &&
861 (host->flags & SDHCI_USE_ADMA)) {
862 if (host->flags & SDHCI_USE_64_BIT_DMA)
863 ctrl |= SDHCI_CTRL_ADMA64;
864 else
865 ctrl |= SDHCI_CTRL_ADMA32;
866 } else {
867 ctrl |= SDHCI_CTRL_SDMA;
868 }
869 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
870 }
871
872 if (!(host->flags & SDHCI_REQ_USE_DMA)) {
873 int flags;
874
875 flags = SG_MITER_ATOMIC;
876 if (host->data->flags & MMC_DATA_READ)
877 flags |= SG_MITER_TO_SG;
878 else
879 flags |= SG_MITER_FROM_SG;
880 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
881 host->blocks = data->blocks;
882 }
883
884 sdhci_set_transfer_irqs(host);
885
886 /* Set the DMA boundary value and block size */
887 sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
888 data->blksz), SDHCI_BLOCK_SIZE);
889 sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
890 }
891
892 static void sdhci_set_transfer_mode(struct sdhci_host *host,
893 struct mmc_command *cmd)
894 {
895 u16 mode = 0;
896 struct mmc_data *data = cmd->data;
897
898 if (data == NULL) {
899 if (host->quirks2 &
900 SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
901 sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
902 } else {
903 /* clear Auto CMD settings for no data CMDs */
904 mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
905 sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
906 SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
907 }
908 return;
909 }
910
911 WARN_ON(!host->data);
912
913 if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE))
914 mode = SDHCI_TRNS_BLK_CNT_EN;
915
916 if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
917 mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI;
918 /*
919 * If we are sending CMD23, CMD12 never gets sent
920 * on successful completion (so no Auto-CMD12).
921 */
922 if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12) &&
923 (cmd->opcode != SD_IO_RW_EXTENDED))
924 mode |= SDHCI_TRNS_AUTO_CMD12;
925 else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
926 mode |= SDHCI_TRNS_AUTO_CMD23;
927 sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2);
928 }
929 }
930
931 if (data->flags & MMC_DATA_READ)
932 mode |= SDHCI_TRNS_READ;
933 if (host->flags & SDHCI_REQ_USE_DMA)
934 mode |= SDHCI_TRNS_DMA;
935
936 sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
937 }
938
939 static void sdhci_finish_data(struct sdhci_host *host)
940 {
941 struct mmc_data *data;
942
943 BUG_ON(!host->data);
944
945 data = host->data;
946 host->data = NULL;
947
948 if (host->flags & SDHCI_REQ_USE_DMA) {
949 if (host->flags & SDHCI_USE_ADMA)
950 sdhci_adma_table_post(host, data);
951 else {
952 if (data->host_cookie == COOKIE_MAPPED) {
953 dma_unmap_sg(mmc_dev(host->mmc),
954 data->sg, data->sg_len,
955 (data->flags & MMC_DATA_READ) ?
956 DMA_FROM_DEVICE : DMA_TO_DEVICE);
957 data->host_cookie = COOKIE_UNMAPPED;
958 }
959 }
960 }
961
962 /*
963 * The specification states that the block count register must
964 * be updated, but it does not specify at what point in the
965 * data flow. That makes the register entirely useless to read
966 * back so we have to assume that nothing made it to the card
967 * in the event of an error.
968 */
969 if (data->error)
970 data->bytes_xfered = 0;
971 else
972 data->bytes_xfered = data->blksz * data->blocks;
973
974 /*
975 * Need to send CMD12 if -
976 * a) open-ended multiblock transfer (no CMD23)
977 * b) error in multiblock transfer
978 */
979 if (data->stop &&
980 (data->error ||
981 !host->mrq->sbc)) {
982
983 /*
984 * The controller needs a reset of internal state machines
985 * upon error conditions.
986 */
987 if (data->error) {
988 sdhci_do_reset(host, SDHCI_RESET_CMD);
989 sdhci_do_reset(host, SDHCI_RESET_DATA);
990 }
991
992 sdhci_send_command(host, data->stop);
993 } else
994 tasklet_schedule(&host->finish_tasklet);
995 }
996
997 void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
998 {
999 int flags;
1000 u32 mask;
1001 unsigned long timeout;
1002
1003 WARN_ON(host->cmd);
1004
1005 /* Wait max 10 ms */
1006 timeout = 10;
1007
1008 mask = SDHCI_CMD_INHIBIT;
1009 if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
1010 mask |= SDHCI_DATA_INHIBIT;
1011
1012 /* We shouldn't wait for data inihibit for stop commands, even
1013 though they might use busy signaling */
1014 if (host->mrq->data && (cmd == host->mrq->data->stop))
1015 mask &= ~SDHCI_DATA_INHIBIT;
1016
1017 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
1018 if (timeout == 0) {
1019 pr_err("%s: Controller never released "
1020 "inhibit bit(s).\n", mmc_hostname(host->mmc));
1021 sdhci_dumpregs(host);
1022 cmd->error = -EIO;
1023 tasklet_schedule(&host->finish_tasklet);
1024 return;
1025 }
1026 timeout--;
1027 mdelay(1);
1028 }
1029
1030 timeout = jiffies;
1031 if (!cmd->data && cmd->busy_timeout > 9000)
1032 timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
1033 else
1034 timeout += 10 * HZ;
1035 mod_timer(&host->timer, timeout);
1036
1037 host->cmd = cmd;
1038 host->busy_handle = 0;
1039
1040 sdhci_prepare_data(host, cmd);
1041
1042 sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
1043
1044 sdhci_set_transfer_mode(host, cmd);
1045
1046 if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
1047 pr_err("%s: Unsupported response type!\n",
1048 mmc_hostname(host->mmc));
1049 cmd->error = -EINVAL;
1050 tasklet_schedule(&host->finish_tasklet);
1051 return;
1052 }
1053
1054 if (!(cmd->flags & MMC_RSP_PRESENT))
1055 flags = SDHCI_CMD_RESP_NONE;
1056 else if (cmd->flags & MMC_RSP_136)
1057 flags = SDHCI_CMD_RESP_LONG;
1058 else if (cmd->flags & MMC_RSP_BUSY)
1059 flags = SDHCI_CMD_RESP_SHORT_BUSY;
1060 else
1061 flags = SDHCI_CMD_RESP_SHORT;
1062
1063 if (cmd->flags & MMC_RSP_CRC)
1064 flags |= SDHCI_CMD_CRC;
1065 if (cmd->flags & MMC_RSP_OPCODE)
1066 flags |= SDHCI_CMD_INDEX;
1067
1068 /* CMD19 is special in that the Data Present Select should be set */
1069 if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
1070 cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
1071 flags |= SDHCI_CMD_DATA;
1072
1073 sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
1074 }
1075 EXPORT_SYMBOL_GPL(sdhci_send_command);
1076
1077 static void sdhci_finish_command(struct sdhci_host *host)
1078 {
1079 int i;
1080
1081 BUG_ON(host->cmd == NULL);
1082
1083 if (host->cmd->flags & MMC_RSP_PRESENT) {
1084 if (host->cmd->flags & MMC_RSP_136) {
1085 /* CRC is stripped so we need to do some shifting. */
1086 for (i = 0;i < 4;i++) {
1087 host->cmd->resp[i] = sdhci_readl(host,
1088 SDHCI_RESPONSE + (3-i)*4) << 8;
1089 if (i != 3)
1090 host->cmd->resp[i] |=
1091 sdhci_readb(host,
1092 SDHCI_RESPONSE + (3-i)*4-1);
1093 }
1094 } else {
1095 host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
1096 }
1097 }
1098
1099 host->cmd->error = 0;
1100
1101 /* Finished CMD23, now send actual command. */
1102 if (host->cmd == host->mrq->sbc) {
1103 host->cmd = NULL;
1104 sdhci_send_command(host, host->mrq->cmd);
1105 } else {
1106
1107 /* Processed actual command. */
1108 if (host->data && host->data_early)
1109 sdhci_finish_data(host);
1110
1111 if (!host->cmd->data)
1112 tasklet_schedule(&host->finish_tasklet);
1113
1114 host->cmd = NULL;
1115 }
1116 }
1117
1118 static u16 sdhci_get_preset_value(struct sdhci_host *host)
1119 {
1120 u16 preset = 0;
1121
1122 switch (host->timing) {
1123 case MMC_TIMING_UHS_SDR12:
1124 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
1125 break;
1126 case MMC_TIMING_UHS_SDR25:
1127 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
1128 break;
1129 case MMC_TIMING_UHS_SDR50:
1130 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
1131 break;
1132 case MMC_TIMING_UHS_SDR104:
1133 case MMC_TIMING_MMC_HS200:
1134 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
1135 break;
1136 case MMC_TIMING_UHS_DDR50:
1137 case MMC_TIMING_MMC_DDR52:
1138 preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
1139 break;
1140 case MMC_TIMING_MMC_HS400:
1141 preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
1142 break;
1143 default:
1144 pr_warn("%s: Invalid UHS-I mode selected\n",
1145 mmc_hostname(host->mmc));
1146 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
1147 break;
1148 }
1149 return preset;
1150 }
1151
1152 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
1153 {
1154 int div = 0; /* Initialized for compiler warning */
1155 int real_div = div, clk_mul = 1;
1156 u16 clk = 0;
1157 unsigned long timeout;
1158 bool switch_base_clk = false;
1159
1160 host->mmc->actual_clock = 0;
1161
1162 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
1163 if (host->quirks2 & SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST)
1164 mdelay(1);
1165
1166 if (clock == 0)
1167 return;
1168
1169 if (host->version >= SDHCI_SPEC_300) {
1170 if (host->preset_enabled) {
1171 u16 pre_val;
1172
1173 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1174 pre_val = sdhci_get_preset_value(host);
1175 div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
1176 >> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
1177 if (host->clk_mul &&
1178 (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
1179 clk = SDHCI_PROG_CLOCK_MODE;
1180 real_div = div + 1;
1181 clk_mul = host->clk_mul;
1182 } else {
1183 real_div = max_t(int, 1, div << 1);
1184 }
1185 goto clock_set;
1186 }
1187
1188 /*
1189 * Check if the Host Controller supports Programmable Clock
1190 * Mode.
1191 */
1192 if (host->clk_mul) {
1193 for (div = 1; div <= 1024; div++) {
1194 if ((host->max_clk * host->clk_mul / div)
1195 <= clock)
1196 break;
1197 }
1198 if ((host->max_clk * host->clk_mul / div) <= clock) {
1199 /*
1200 * Set Programmable Clock Mode in the Clock
1201 * Control register.
1202 */
1203 clk = SDHCI_PROG_CLOCK_MODE;
1204 real_div = div;
1205 clk_mul = host->clk_mul;
1206 div--;
1207 } else {
1208 /*
1209 * Divisor can be too small to reach clock
1210 * speed requirement. Then use the base clock.
1211 */
1212 switch_base_clk = true;
1213 }
1214 }
1215
1216 if (!host->clk_mul || switch_base_clk) {
1217 /* Version 3.00 divisors must be a multiple of 2. */
1218 if (host->max_clk <= clock)
1219 div = 1;
1220 else {
1221 for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
1222 div += 2) {
1223 if ((host->max_clk / div) <= clock)
1224 break;
1225 }
1226 }
1227 real_div = div;
1228 div >>= 1;
1229 if ((host->quirks2 & SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN)
1230 && !div && host->max_clk <= 25000000)
1231 div = 1;
1232 }
1233 } else {
1234 /* Version 2.00 divisors must be a power of 2. */
1235 for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
1236 if ((host->max_clk / div) <= clock)
1237 break;
1238 }
1239 real_div = div;
1240 div >>= 1;
1241 }
1242
1243 clock_set:
1244 if (real_div)
1245 host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
1246 clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
1247 clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
1248 << SDHCI_DIVIDER_HI_SHIFT;
1249 clk |= SDHCI_CLOCK_INT_EN;
1250 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1251
1252 /* Wait max 20 ms */
1253 timeout = 20;
1254 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
1255 & SDHCI_CLOCK_INT_STABLE)) {
1256 if (timeout == 0) {
1257 pr_err("%s: Internal clock never "
1258 "stabilised.\n", mmc_hostname(host->mmc));
1259 sdhci_dumpregs(host);
1260 return;
1261 }
1262 timeout--;
1263 mdelay(1);
1264 }
1265
1266 clk |= SDHCI_CLOCK_CARD_EN;
1267 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1268 }
1269 EXPORT_SYMBOL_GPL(sdhci_set_clock);
1270
1271 static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
1272 unsigned short vdd)
1273 {
1274 struct mmc_host *mmc = host->mmc;
1275 u8 pwr = 0;
1276
1277 if (!IS_ERR(mmc->supply.vmmc)) {
1278 spin_unlock_irq(&host->lock);
1279 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
1280 spin_lock_irq(&host->lock);
1281
1282 if (mode != MMC_POWER_OFF)
1283 sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
1284 else
1285 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1286
1287 return;
1288 }
1289
1290 if (mode != MMC_POWER_OFF) {
1291 switch (1 << vdd) {
1292 case MMC_VDD_165_195:
1293 pwr = SDHCI_POWER_180;
1294 break;
1295 case MMC_VDD_29_30:
1296 case MMC_VDD_30_31:
1297 pwr = SDHCI_POWER_300;
1298 break;
1299 case MMC_VDD_32_33:
1300 case MMC_VDD_33_34:
1301 pwr = SDHCI_POWER_330;
1302 break;
1303 default:
1304 BUG();
1305 }
1306 }
1307
1308 if (host->pwr == pwr)
1309 return;
1310
1311 host->pwr = pwr;
1312
1313 if (pwr == 0) {
1314 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1315 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
1316 sdhci_runtime_pm_bus_off(host);
1317 vdd = 0;
1318 } else {
1319 /*
1320 * Spec says that we should clear the power reg before setting
1321 * a new value. Some controllers don't seem to like this though.
1322 */
1323 if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
1324 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1325
1326 /*
1327 * At least the Marvell CaFe chip gets confused if we set the
1328 * voltage and set turn on power at the same time, so set the
1329 * voltage first.
1330 */
1331 if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
1332 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1333
1334 pwr |= SDHCI_POWER_ON;
1335
1336 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1337
1338 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
1339 sdhci_runtime_pm_bus_on(host);
1340
1341 /*
1342 * Some controllers need an extra 10ms delay of 10ms before
1343 * they can apply clock after applying power
1344 */
1345 if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
1346 mdelay(10);
1347 }
1348 }
1349
1350 /*****************************************************************************\
1351 * *
1352 * MMC callbacks *
1353 * *
1354 \*****************************************************************************/
1355
1356 static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1357 {
1358 struct sdhci_host *host;
1359 int present;
1360 unsigned long flags;
1361
1362 host = mmc_priv(mmc);
1363
1364 sdhci_runtime_pm_get(host);
1365
1366 /* Firstly check card presence */
1367 present = sdhci_do_get_cd(host);
1368
1369 spin_lock_irqsave(&host->lock, flags);
1370
1371 WARN_ON(host->mrq != NULL);
1372
1373 #ifndef SDHCI_USE_LEDS_CLASS
1374 sdhci_activate_led(host);
1375 #endif
1376
1377 /*
1378 * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED
1379 * requests if Auto-CMD12 is enabled.
1380 */
1381 if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) {
1382 if (mrq->stop) {
1383 mrq->data->stop = NULL;
1384 mrq->stop = NULL;
1385 }
1386 }
1387
1388 host->mrq = mrq;
1389
1390 if (!present || host->flags & SDHCI_DEVICE_DEAD) {
1391 host->mrq->cmd->error = -ENOMEDIUM;
1392 tasklet_schedule(&host->finish_tasklet);
1393 } else {
1394 if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
1395 sdhci_send_command(host, mrq->sbc);
1396 else
1397 sdhci_send_command(host, mrq->cmd);
1398 }
1399
1400 mmiowb();
1401 spin_unlock_irqrestore(&host->lock, flags);
1402 }
1403
1404 void sdhci_set_bus_width(struct sdhci_host *host, int width)
1405 {
1406 u8 ctrl;
1407
1408 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1409 if (width == MMC_BUS_WIDTH_8) {
1410 ctrl &= ~SDHCI_CTRL_4BITBUS;
1411 if (host->version >= SDHCI_SPEC_300)
1412 ctrl |= SDHCI_CTRL_8BITBUS;
1413 } else {
1414 if (host->version >= SDHCI_SPEC_300)
1415 ctrl &= ~SDHCI_CTRL_8BITBUS;
1416 if (width == MMC_BUS_WIDTH_4)
1417 ctrl |= SDHCI_CTRL_4BITBUS;
1418 else
1419 ctrl &= ~SDHCI_CTRL_4BITBUS;
1420 }
1421 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1422 }
1423 EXPORT_SYMBOL_GPL(sdhci_set_bus_width);
1424
1425 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
1426 {
1427 u16 ctrl_2;
1428
1429 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1430 /* Select Bus Speed Mode for host */
1431 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
1432 if ((timing == MMC_TIMING_MMC_HS200) ||
1433 (timing == MMC_TIMING_UHS_SDR104))
1434 ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
1435 else if (timing == MMC_TIMING_UHS_SDR12)
1436 ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
1437 else if (timing == MMC_TIMING_UHS_SDR25)
1438 ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
1439 else if (timing == MMC_TIMING_UHS_SDR50)
1440 ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
1441 else if ((timing == MMC_TIMING_UHS_DDR50) ||
1442 (timing == MMC_TIMING_MMC_DDR52))
1443 ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
1444 else if (timing == MMC_TIMING_MMC_HS400)
1445 ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
1446 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
1447 }
1448 EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
1449
1450 static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
1451 {
1452 unsigned long flags;
1453 u8 ctrl;
1454 struct mmc_host *mmc = host->mmc;
1455
1456 spin_lock_irqsave(&host->lock, flags);
1457
1458 if (host->flags & SDHCI_DEVICE_DEAD) {
1459 spin_unlock_irqrestore(&host->lock, flags);
1460 if (!IS_ERR(mmc->supply.vmmc) &&
1461 ios->power_mode == MMC_POWER_OFF)
1462 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
1463 return;
1464 }
1465
1466 /*
1467 * Reset the chip on each power off.
1468 * Should clear out any weird states.
1469 */
1470 if (ios->power_mode == MMC_POWER_OFF) {
1471 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
1472 sdhci_reinit(host);
1473 }
1474
1475 if (host->version >= SDHCI_SPEC_300 &&
1476 (ios->power_mode == MMC_POWER_UP) &&
1477 !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
1478 sdhci_enable_preset_value(host, false);
1479
1480 if (!ios->clock || ios->clock != host->clock) {
1481 host->ops->set_clock(host, ios->clock);
1482 host->clock = ios->clock;
1483
1484 if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK &&
1485 host->clock) {
1486 host->timeout_clk = host->mmc->actual_clock ?
1487 host->mmc->actual_clock / 1000 :
1488 host->clock / 1000;
1489 host->mmc->max_busy_timeout =
1490 host->ops->get_max_timeout_count ?
1491 host->ops->get_max_timeout_count(host) :
1492 1 << 27;
1493 host->mmc->max_busy_timeout /= host->timeout_clk;
1494 }
1495 }
1496
1497 sdhci_set_power(host, ios->power_mode, ios->vdd);
1498
1499 if (host->ops->platform_send_init_74_clocks)
1500 host->ops->platform_send_init_74_clocks(host, ios->power_mode);
1501
1502 host->ops->set_bus_width(host, ios->bus_width);
1503
1504 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1505
1506 if ((ios->timing == MMC_TIMING_SD_HS ||
1507 ios->timing == MMC_TIMING_MMC_HS)
1508 && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
1509 ctrl |= SDHCI_CTRL_HISPD;
1510 else
1511 ctrl &= ~SDHCI_CTRL_HISPD;
1512
1513 if (host->version >= SDHCI_SPEC_300) {
1514 u16 clk, ctrl_2;
1515
1516 /* In case of UHS-I modes, set High Speed Enable */
1517 if ((ios->timing == MMC_TIMING_MMC_HS400) ||
1518 (ios->timing == MMC_TIMING_MMC_HS200) ||
1519 (ios->timing == MMC_TIMING_MMC_DDR52) ||
1520 (ios->timing == MMC_TIMING_UHS_SDR50) ||
1521 (ios->timing == MMC_TIMING_UHS_SDR104) ||
1522 (ios->timing == MMC_TIMING_UHS_DDR50) ||
1523 (ios->timing == MMC_TIMING_UHS_SDR25))
1524 ctrl |= SDHCI_CTRL_HISPD;
1525
1526 if (!host->preset_enabled) {
1527 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1528 /*
1529 * We only need to set Driver Strength if the
1530 * preset value enable is not set.
1531 */
1532 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1533 ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
1534 if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
1535 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
1536 else if (ios->drv_type == MMC_SET_DRIVER_TYPE_B)
1537 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_B;
1538 else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
1539 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
1540 else if (ios->drv_type == MMC_SET_DRIVER_TYPE_D)
1541 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_D;
1542 else {
1543 pr_warn("%s: invalid driver type, default to "
1544 "driver type B\n", mmc_hostname(mmc));
1545 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_B;
1546 }
1547
1548 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
1549 } else {
1550 /*
1551 * According to SDHC Spec v3.00, if the Preset Value
1552 * Enable in the Host Control 2 register is set, we
1553 * need to reset SD Clock Enable before changing High
1554 * Speed Enable to avoid generating clock gliches.
1555 */
1556
1557 /* Reset SD Clock Enable */
1558 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1559 clk &= ~SDHCI_CLOCK_CARD_EN;
1560 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1561
1562 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1563
1564 /* Re-enable SD Clock */
1565 host->ops->set_clock(host, host->clock);
1566 }
1567
1568 /* Reset SD Clock Enable */
1569 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1570 clk &= ~SDHCI_CLOCK_CARD_EN;
1571 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1572
1573 host->ops->set_uhs_signaling(host, ios->timing);
1574 host->timing = ios->timing;
1575
1576 if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
1577 ((ios->timing == MMC_TIMING_UHS_SDR12) ||
1578 (ios->timing == MMC_TIMING_UHS_SDR25) ||
1579 (ios->timing == MMC_TIMING_UHS_SDR50) ||
1580 (ios->timing == MMC_TIMING_UHS_SDR104) ||
1581 (ios->timing == MMC_TIMING_UHS_DDR50) ||
1582 (ios->timing == MMC_TIMING_MMC_DDR52))) {
1583 u16 preset;
1584
1585 sdhci_enable_preset_value(host, true);
1586 preset = sdhci_get_preset_value(host);
1587 ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
1588 >> SDHCI_PRESET_DRV_SHIFT;
1589 }
1590
1591 /* Re-enable SD Clock */
1592 host->ops->set_clock(host, host->clock);
1593 } else
1594 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1595
1596 /*
1597 * Some (ENE) controllers go apeshit on some ios operation,
1598 * signalling timeout and CRC errors even on CMD0. Resetting
1599 * it on each ios seems to solve the problem.
1600 */
1601 if (host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
1602 sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
1603
1604 mmiowb();
1605 spin_unlock_irqrestore(&host->lock, flags);
1606 }
1607
1608 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1609 {
1610 struct sdhci_host *host = mmc_priv(mmc);
1611
1612 sdhci_runtime_pm_get(host);
1613 sdhci_do_set_ios(host, ios);
1614 sdhci_runtime_pm_put(host);
1615 }
1616
1617 static int sdhci_do_get_cd(struct sdhci_host *host)
1618 {
1619 int gpio_cd = mmc_gpio_get_cd(host->mmc);
1620
1621 if (host->flags & SDHCI_DEVICE_DEAD)
1622 return 0;
1623
1624 /* If nonremovable, assume that the card is always present. */
1625 if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
1626 return 1;
1627
1628 /*
1629 * Try slot gpio detect, if defined it take precedence
1630 * over build in controller functionality
1631 */
1632 if (!IS_ERR_VALUE(gpio_cd))
1633 return !!gpio_cd;
1634
1635 /* If polling, assume that the card is always present. */
1636 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
1637 return 1;
1638
1639 /* Host native card detect */
1640 return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
1641 }
1642
1643 static int sdhci_get_cd(struct mmc_host *mmc)
1644 {
1645 struct sdhci_host *host = mmc_priv(mmc);
1646 int ret;
1647
1648 sdhci_runtime_pm_get(host);
1649 ret = sdhci_do_get_cd(host);
1650 sdhci_runtime_pm_put(host);
1651 return ret;
1652 }
1653
1654 static int sdhci_check_ro(struct sdhci_host *host)
1655 {
1656 unsigned long flags;
1657 int is_readonly;
1658
1659 spin_lock_irqsave(&host->lock, flags);
1660
1661 if (host->flags & SDHCI_DEVICE_DEAD)
1662 is_readonly = 0;
1663 else if (host->ops->get_ro)
1664 is_readonly = host->ops->get_ro(host);
1665 else
1666 is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
1667 & SDHCI_WRITE_PROTECT);
1668
1669 spin_unlock_irqrestore(&host->lock, flags);
1670
1671 /* This quirk needs to be replaced by a callback-function later */
1672 return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
1673 !is_readonly : is_readonly;
1674 }
1675
1676 #define SAMPLE_COUNT 5
1677
1678 static int sdhci_do_get_ro(struct sdhci_host *host)
1679 {
1680 int i, ro_count;
1681
1682 if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT))
1683 return sdhci_check_ro(host);
1684
1685 ro_count = 0;
1686 for (i = 0; i < SAMPLE_COUNT; i++) {
1687 if (sdhci_check_ro(host)) {
1688 if (++ro_count > SAMPLE_COUNT / 2)
1689 return 1;
1690 }
1691 msleep(30);
1692 }
1693 return 0;
1694 }
1695
1696 static void sdhci_hw_reset(struct mmc_host *mmc)
1697 {
1698 struct sdhci_host *host = mmc_priv(mmc);
1699
1700 if (host->ops && host->ops->hw_reset)
1701 host->ops->hw_reset(host);
1702 }
1703
1704 static int sdhci_get_ro(struct mmc_host *mmc)
1705 {
1706 struct sdhci_host *host = mmc_priv(mmc);
1707 int ret;
1708
1709 sdhci_runtime_pm_get(host);
1710 ret = sdhci_do_get_ro(host);
1711 sdhci_runtime_pm_put(host);
1712 return ret;
1713 }
1714
1715 static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
1716 {
1717 if (!(host->flags & SDHCI_DEVICE_DEAD)) {
1718 if (enable)
1719 host->ier |= SDHCI_INT_CARD_INT;
1720 else
1721 host->ier &= ~SDHCI_INT_CARD_INT;
1722
1723 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
1724 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
1725 mmiowb();
1726 }
1727 }
1728
1729 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1730 {
1731 struct sdhci_host *host = mmc_priv(mmc);
1732 unsigned long flags;
1733
1734 sdhci_runtime_pm_get(host);
1735
1736 spin_lock_irqsave(&host->lock, flags);
1737 if (enable)
1738 host->flags |= SDHCI_SDIO_IRQ_ENABLED;
1739 else
1740 host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
1741
1742 sdhci_enable_sdio_irq_nolock(host, enable);
1743 spin_unlock_irqrestore(&host->lock, flags);
1744
1745 sdhci_runtime_pm_put(host);
1746 }
1747
1748 static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
1749 struct mmc_ios *ios)
1750 {
1751 struct mmc_host *mmc = host->mmc;
1752 u16 ctrl;
1753 int ret;
1754
1755 /*
1756 * Signal Voltage Switching is only applicable for Host Controllers
1757 * v3.00 and above.
1758 */
1759 if (host->version < SDHCI_SPEC_300)
1760 return 0;
1761
1762 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1763
1764 switch (ios->signal_voltage) {
1765 case MMC_SIGNAL_VOLTAGE_330:
1766 /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
1767 ctrl &= ~SDHCI_CTRL_VDD_180;
1768 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1769
1770 if (!IS_ERR(mmc->supply.vqmmc)) {
1771 ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
1772 3600000);
1773 if (ret) {
1774 pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
1775 mmc_hostname(mmc));
1776 return -EIO;
1777 }
1778 }
1779 /* Wait for 5ms */
1780 usleep_range(5000, 5500);
1781
1782 /* 3.3V regulator output should be stable within 5 ms */
1783 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1784 if (!(ctrl & SDHCI_CTRL_VDD_180))
1785 return 0;
1786
1787 pr_warn("%s: 3.3V regulator output did not became stable\n",
1788 mmc_hostname(mmc));
1789
1790 return -EAGAIN;
1791 case MMC_SIGNAL_VOLTAGE_180:
1792 if (!IS_ERR(mmc->supply.vqmmc)) {
1793 ret = regulator_set_voltage(mmc->supply.vqmmc,
1794 1700000, 1950000);
1795 if (ret) {
1796 pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
1797 mmc_hostname(mmc));
1798 return -EIO;
1799 }
1800 }
1801
1802 /*
1803 * Enable 1.8V Signal Enable in the Host Control2
1804 * register
1805 */
1806 ctrl |= SDHCI_CTRL_VDD_180;
1807 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1808
1809 /* Some controller need to do more when switching */
1810 if (host->ops->voltage_switch)
1811 host->ops->voltage_switch(host);
1812
1813 /* 1.8V regulator output should be stable within 5 ms */
1814 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1815 if (ctrl & SDHCI_CTRL_VDD_180)
1816 return 0;
1817
1818 pr_warn("%s: 1.8V regulator output did not became stable\n",
1819 mmc_hostname(mmc));
1820
1821 return -EAGAIN;
1822 case MMC_SIGNAL_VOLTAGE_120:
1823 if (!IS_ERR(mmc->supply.vqmmc)) {
1824 ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
1825 1300000);
1826 if (ret) {
1827 pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
1828 mmc_hostname(mmc));
1829 return -EIO;
1830 }
1831 }
1832 return 0;
1833 default:
1834 /* No signal voltage switch required */
1835 return 0;
1836 }
1837 }
1838
1839 static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
1840 struct mmc_ios *ios)
1841 {
1842 struct sdhci_host *host = mmc_priv(mmc);
1843 int err;
1844
1845 if (host->version < SDHCI_SPEC_300)
1846 return 0;
1847 sdhci_runtime_pm_get(host);
1848 err = sdhci_do_start_signal_voltage_switch(host, ios);
1849 sdhci_runtime_pm_put(host);
1850 return err;
1851 }
1852
1853 static int sdhci_card_busy(struct mmc_host *mmc)
1854 {
1855 struct sdhci_host *host = mmc_priv(mmc);
1856 u32 present_state;
1857
1858 sdhci_runtime_pm_get(host);
1859 /* Check whether DAT[3:0] is 0000 */
1860 present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
1861 sdhci_runtime_pm_put(host);
1862
1863 return !(present_state & SDHCI_DATA_LVL_MASK);
1864 }
1865
1866 static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
1867 {
1868 struct sdhci_host *host = mmc_priv(mmc);
1869 unsigned long flags;
1870
1871 spin_lock_irqsave(&host->lock, flags);
1872 host->flags |= SDHCI_HS400_TUNING;
1873 spin_unlock_irqrestore(&host->lock, flags);
1874
1875 return 0;
1876 }
1877
1878 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
1879 {
1880 struct sdhci_host *host = mmc_priv(mmc);
1881 u16 ctrl;
1882 int tuning_loop_counter = MAX_TUNING_LOOP;
1883 int err = 0;
1884 unsigned long flags;
1885 unsigned int tuning_count = 0;
1886 bool hs400_tuning;
1887
1888 sdhci_runtime_pm_get(host);
1889 spin_lock_irqsave(&host->lock, flags);
1890
1891 hs400_tuning = host->flags & SDHCI_HS400_TUNING;
1892 host->flags &= ~SDHCI_HS400_TUNING;
1893
1894 if (host->tuning_mode == SDHCI_TUNING_MODE_1)
1895 tuning_count = host->tuning_count;
1896
1897 /*
1898 * The Host Controller needs tuning only in case of SDR104 mode
1899 * and for SDR50 mode when Use Tuning for SDR50 is set in the
1900 * Capabilities register.
1901 * If the Host Controller supports the HS200 mode then the
1902 * tuning function has to be executed.
1903 */
1904 switch (host->timing) {
1905 /* HS400 tuning is done in HS200 mode */
1906 case MMC_TIMING_MMC_HS400:
1907 err = -EINVAL;
1908 goto out_unlock;
1909
1910 case MMC_TIMING_MMC_HS200:
1911 /*
1912 * Periodic re-tuning for HS400 is not expected to be needed, so
1913 * disable it here.
1914 */
1915 if (hs400_tuning)
1916 tuning_count = 0;
1917 break;
1918
1919 case MMC_TIMING_UHS_SDR104:
1920 break;
1921
1922 case MMC_TIMING_UHS_SDR50:
1923 if (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
1924 host->flags & SDHCI_SDR104_NEEDS_TUNING)
1925 break;
1926 /* FALLTHROUGH */
1927
1928 default:
1929 goto out_unlock;
1930 }
1931
1932 if (host->ops->platform_execute_tuning) {
1933 spin_unlock_irqrestore(&host->lock, flags);
1934 err = host->ops->platform_execute_tuning(host, opcode);
1935 sdhci_runtime_pm_put(host);
1936 return err;
1937 }
1938
1939 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1940 ctrl |= SDHCI_CTRL_EXEC_TUNING;
1941 if (host->quirks2 & SDHCI_QUIRK2_TUNING_WORK_AROUND)
1942 ctrl |= SDHCI_CTRL_TUNED_CLK;
1943 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1944
1945 /*
1946 * As per the Host Controller spec v3.00, tuning command
1947 * generates Buffer Read Ready interrupt, so enable that.
1948 *
1949 * Note: The spec clearly says that when tuning sequence
1950 * is being performed, the controller does not generate
1951 * interrupts other than Buffer Read Ready interrupt. But
1952 * to make sure we don't hit a controller bug, we _only_
1953 * enable Buffer Read Ready interrupt here.
1954 */
1955 sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
1956 sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
1957
1958 /*
1959 * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
1960 * of loops reaches 40 times or a timeout of 150ms occurs.
1961 */
1962 do {
1963 struct mmc_command cmd = {0};
1964 struct mmc_request mrq = {NULL};
1965
1966 cmd.opcode = opcode;
1967 cmd.arg = 0;
1968 cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
1969 cmd.retries = 0;
1970 cmd.data = NULL;
1971 cmd.error = 0;
1972
1973 if (tuning_loop_counter-- == 0)
1974 break;
1975
1976 mrq.cmd = &cmd;
1977 host->mrq = &mrq;
1978
1979 /*
1980 * In response to CMD19, the card sends 64 bytes of tuning
1981 * block to the Host Controller. So we set the block size
1982 * to 64 here.
1983 */
1984 if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) {
1985 if (mmc->ios.bus_width == MMC_BUS_WIDTH_8)
1986 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128),
1987 SDHCI_BLOCK_SIZE);
1988 else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
1989 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
1990 SDHCI_BLOCK_SIZE);
1991 } else {
1992 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
1993 SDHCI_BLOCK_SIZE);
1994 }
1995
1996 /*
1997 * The tuning block is sent by the card to the host controller.
1998 * So we set the TRNS_READ bit in the Transfer Mode register.
1999 * This also takes care of setting DMA Enable and Multi Block
2000 * Select in the same register to 0.
2001 */
2002 sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
2003
2004 sdhci_send_command(host, &cmd);
2005
2006 host->cmd = NULL;
2007 host->mrq = NULL;
2008
2009 spin_unlock_irqrestore(&host->lock, flags);
2010 /* Wait for Buffer Read Ready interrupt */
2011 wait_event_interruptible_timeout(host->buf_ready_int,
2012 (host->tuning_done == 1),
2013 msecs_to_jiffies(50));
2014 spin_lock_irqsave(&host->lock, flags);
2015
2016 if (!host->tuning_done) {
2017 pr_info(DRIVER_NAME ": Timeout waiting for "
2018 "Buffer Read Ready interrupt during tuning "
2019 "procedure, falling back to fixed sampling "
2020 "clock\n");
2021 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
2022 ctrl &= ~SDHCI_CTRL_TUNED_CLK;
2023 ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
2024 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
2025
2026 err = -EIO;
2027 goto out;
2028 }
2029
2030 host->tuning_done = 0;
2031
2032 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
2033
2034 /* eMMC spec does not require a delay between tuning cycles */
2035 if (opcode == MMC_SEND_TUNING_BLOCK)
2036 mdelay(1);
2037 } while (ctrl & SDHCI_CTRL_EXEC_TUNING);
2038
2039 /*
2040 * The Host Driver has exhausted the maximum number of loops allowed,
2041 * so use fixed sampling frequency.
2042 */
2043 if (tuning_loop_counter < 0) {
2044 ctrl &= ~SDHCI_CTRL_TUNED_CLK;
2045 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
2046 }
2047 if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
2048 pr_info(DRIVER_NAME ": Tuning procedure"
2049 " failed, falling back to fixed sampling"
2050 " clock\n");
2051 err = -EIO;
2052 }
2053
2054 out:
2055 if (tuning_count) {
2056 /*
2057 * In case tuning fails, host controllers which support
2058 * re-tuning can try tuning again at a later time, when the
2059 * re-tuning timer expires. So for these controllers, we
2060 * return 0. Since there might be other controllers who do not
2061 * have this capability, we return error for them.
2062 */
2063 err = 0;
2064 }
2065
2066 host->mmc->retune_period = err ? 0 : tuning_count;
2067
2068 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
2069 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
2070 out_unlock:
2071 spin_unlock_irqrestore(&host->lock, flags);
2072 sdhci_runtime_pm_put(host);
2073
2074 return err;
2075 }
2076
2077 static int sdhci_select_drive_strength(struct mmc_card *card,
2078 unsigned int max_dtr, int host_drv,
2079 int card_drv, int *drv_type)
2080 {
2081 struct sdhci_host *host = mmc_priv(card->host);
2082
2083 if (!host->ops->select_drive_strength)
2084 return 0;
2085
2086 return host->ops->select_drive_strength(host, card, max_dtr, host_drv,
2087 card_drv, drv_type);
2088 }
2089
2090 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
2091 {
2092 /* Host Controller v3.00 defines preset value registers */
2093 if (host->version < SDHCI_SPEC_300)
2094 return;
2095
2096 /*
2097 * We only enable or disable Preset Value if they are not already
2098 * enabled or disabled respectively. Otherwise, we bail out.
2099 */
2100 if (host->preset_enabled != enable) {
2101 u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
2102
2103 if (enable)
2104 ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
2105 else
2106 ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
2107
2108 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
2109
2110 if (enable)
2111 host->flags |= SDHCI_PV_ENABLED;
2112 else
2113 host->flags &= ~SDHCI_PV_ENABLED;
2114
2115 host->preset_enabled = enable;
2116 }
2117 }
2118
2119 static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
2120 int err)
2121 {
2122 struct sdhci_host *host = mmc_priv(mmc);
2123 struct mmc_data *data = mrq->data;
2124
2125 if (host->flags & SDHCI_REQ_USE_DMA) {
2126 if (data->host_cookie == COOKIE_GIVEN ||
2127 data->host_cookie == COOKIE_MAPPED)
2128 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
2129 data->flags & MMC_DATA_WRITE ?
2130 DMA_TO_DEVICE : DMA_FROM_DEVICE);
2131 data->host_cookie = COOKIE_UNMAPPED;
2132 }
2133 }
2134
2135 static int sdhci_pre_dma_transfer(struct sdhci_host *host,
2136 struct mmc_data *data)
2137 {
2138 int sg_count;
2139
2140 if (data->host_cookie == COOKIE_MAPPED) {
2141 data->host_cookie = COOKIE_GIVEN;
2142 return data->sg_count;
2143 }
2144
2145 WARN_ON(data->host_cookie == COOKIE_GIVEN);
2146
2147 sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
2148 data->flags & MMC_DATA_WRITE ?
2149 DMA_TO_DEVICE : DMA_FROM_DEVICE);
2150
2151 if (sg_count == 0)
2152 return -ENOSPC;
2153
2154 data->sg_count = sg_count;
2155 data->host_cookie = COOKIE_MAPPED;
2156
2157 return sg_count;
2158 }
2159
2160 static void sdhci_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
2161 bool is_first_req)
2162 {
2163 struct sdhci_host *host = mmc_priv(mmc);
2164
2165 mrq->data->host_cookie = COOKIE_UNMAPPED;
2166
2167 if (host->flags & SDHCI_REQ_USE_DMA)
2168 sdhci_pre_dma_transfer(host, mrq->data);
2169 }
2170
2171 static void sdhci_card_event(struct mmc_host *mmc)
2172 {
2173 struct sdhci_host *host = mmc_priv(mmc);
2174 unsigned long flags;
2175 int present;
2176
2177 /* First check if client has provided their own card event */
2178 if (host->ops->card_event)
2179 host->ops->card_event(host);
2180
2181 present = sdhci_do_get_cd(host);
2182
2183 spin_lock_irqsave(&host->lock, flags);
2184
2185 /* Check host->mrq first in case we are runtime suspended */
2186 if (host->mrq && !present) {
2187 pr_err("%s: Card removed during transfer!\n",
2188 mmc_hostname(host->mmc));
2189 pr_err("%s: Resetting controller.\n",
2190 mmc_hostname(host->mmc));
2191
2192 sdhci_do_reset(host, SDHCI_RESET_CMD);
2193 sdhci_do_reset(host, SDHCI_RESET_DATA);
2194
2195 host->mrq->cmd->error = -ENOMEDIUM;
2196 tasklet_schedule(&host->finish_tasklet);
2197 }
2198
2199 spin_unlock_irqrestore(&host->lock, flags);
2200 }
2201
2202 static const struct mmc_host_ops sdhci_ops = {
2203 .request = sdhci_request,
2204 .post_req = sdhci_post_req,
2205 .pre_req = sdhci_pre_req,
2206 .set_ios = sdhci_set_ios,
2207 .get_cd = sdhci_get_cd,
2208 .get_ro = sdhci_get_ro,
2209 .hw_reset = sdhci_hw_reset,
2210 .enable_sdio_irq = sdhci_enable_sdio_irq,
2211 .start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
2212 .prepare_hs400_tuning = sdhci_prepare_hs400_tuning,
2213 .execute_tuning = sdhci_execute_tuning,
2214 .select_drive_strength = sdhci_select_drive_strength,
2215 .card_event = sdhci_card_event,
2216 .card_busy = sdhci_card_busy,
2217 };
2218
2219 /*****************************************************************************\
2220 * *
2221 * Tasklets *
2222 * *
2223 \*****************************************************************************/
2224
2225 static void sdhci_tasklet_finish(unsigned long param)
2226 {
2227 struct sdhci_host *host;
2228 unsigned long flags;
2229 struct mmc_request *mrq;
2230
2231 host = (struct sdhci_host*)param;
2232
2233 spin_lock_irqsave(&host->lock, flags);
2234
2235 /*
2236 * If this tasklet gets rescheduled while running, it will
2237 * be run again afterwards but without any active request.
2238 */
2239 if (!host->mrq) {
2240 spin_unlock_irqrestore(&host->lock, flags);
2241 return;
2242 }
2243
2244 del_timer(&host->timer);
2245
2246 mrq = host->mrq;
2247
2248 /*
2249 * The controller needs a reset of internal state machines
2250 * upon error conditions.
2251 */
2252 if (!(host->flags & SDHCI_DEVICE_DEAD) &&
2253 ((mrq->cmd && mrq->cmd->error) ||
2254 (mrq->sbc && mrq->sbc->error) ||
2255 (mrq->data && ((mrq->data->error && !mrq->data->stop) ||
2256 (mrq->data->stop && mrq->data->stop->error))) ||
2257 (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
2258
2259 /* Some controllers need this kick or reset won't work here */
2260 if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
2261 /* This is to force an update */
2262 host->ops->set_clock(host, host->clock);
2263
2264 /* Spec says we should do both at the same time, but Ricoh
2265 controllers do not like that. */
2266 sdhci_do_reset(host, SDHCI_RESET_CMD);
2267 sdhci_do_reset(host, SDHCI_RESET_DATA);
2268 }
2269
2270 host->mrq = NULL;
2271 host->cmd = NULL;
2272 host->data = NULL;
2273
2274 #ifndef SDHCI_USE_LEDS_CLASS
2275 sdhci_deactivate_led(host);
2276 #endif
2277
2278 mmiowb();
2279 spin_unlock_irqrestore(&host->lock, flags);
2280
2281 mmc_request_done(host->mmc, mrq);
2282 sdhci_runtime_pm_put(host);
2283 }
2284
2285 static void sdhci_timeout_timer(unsigned long data)
2286 {
2287 struct sdhci_host *host;
2288 unsigned long flags;
2289
2290 host = (struct sdhci_host*)data;
2291
2292 spin_lock_irqsave(&host->lock, flags);
2293
2294 if (host->mrq) {
2295 pr_err("%s: Timeout waiting for hardware "
2296 "interrupt.\n", mmc_hostname(host->mmc));
2297 sdhci_dumpregs(host);
2298
2299 if (host->data) {
2300 host->data->error = -ETIMEDOUT;
2301 sdhci_finish_data(host);
2302 } else {
2303 if (host->cmd)
2304 host->cmd->error = -ETIMEDOUT;
2305 else
2306 host->mrq->cmd->error = -ETIMEDOUT;
2307
2308 tasklet_schedule(&host->finish_tasklet);
2309 }
2310 }
2311
2312 mmiowb();
2313 spin_unlock_irqrestore(&host->lock, flags);
2314 }
2315
2316 /*****************************************************************************\
2317 * *
2318 * Interrupt handling *
2319 * *
2320 \*****************************************************************************/
2321
2322 static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask)
2323 {
2324 BUG_ON(intmask == 0);
2325
2326 if (!host->cmd) {
2327 pr_err("%s: Got command interrupt 0x%08x even "
2328 "though no command operation was in progress.\n",
2329 mmc_hostname(host->mmc), (unsigned)intmask);
2330 sdhci_dumpregs(host);
2331 return;
2332 }
2333
2334 if (intmask & SDHCI_INT_TIMEOUT)
2335 host->cmd->error = -ETIMEDOUT;
2336 else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
2337 SDHCI_INT_INDEX))
2338 host->cmd->error = -EILSEQ;
2339
2340 if (host->cmd->error) {
2341 tasklet_schedule(&host->finish_tasklet);
2342 return;
2343 }
2344
2345 /*
2346 * The host can send and interrupt when the busy state has
2347 * ended, allowing us to wait without wasting CPU cycles.
2348 * Unfortunately this is overloaded on the "data complete"
2349 * interrupt, so we need to take some care when handling
2350 * it.
2351 *
2352 * Note: The 1.0 specification is a bit ambiguous about this
2353 * feature so there might be some problems with older
2354 * controllers.
2355 */
2356 if (host->cmd->flags & MMC_RSP_BUSY) {
2357 if (host->cmd->data)
2358 DBG("Cannot wait for busy signal when also "
2359 "doing a data transfer");
2360 else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ)
2361 && !host->busy_handle) {
2362 /* Mark that command complete before busy is ended */
2363 host->busy_handle = 1;
2364 return;
2365 }
2366
2367 /* The controller does not support the end-of-busy IRQ,
2368 * fall through and take the SDHCI_INT_RESPONSE */
2369 } else if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) &&
2370 host->cmd->opcode == MMC_STOP_TRANSMISSION && !host->data) {
2371 *mask &= ~SDHCI_INT_DATA_END;
2372 }
2373
2374 if (intmask & SDHCI_INT_RESPONSE)
2375 sdhci_finish_command(host);
2376 }
2377
2378 #ifdef CONFIG_MMC_DEBUG
2379 static void sdhci_adma_show_error(struct sdhci_host *host)
2380 {
2381 const char *name = mmc_hostname(host->mmc);
2382 void *desc = host->adma_table;
2383
2384 sdhci_dumpregs(host);
2385
2386 while (true) {
2387 struct sdhci_adma2_64_desc *dma_desc = desc;
2388
2389 if (host->flags & SDHCI_USE_64_BIT_DMA)
2390 DBG("%s: %p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
2391 name, desc, le32_to_cpu(dma_desc->addr_hi),
2392 le32_to_cpu(dma_desc->addr_lo),
2393 le16_to_cpu(dma_desc->len),
2394 le16_to_cpu(dma_desc->cmd));
2395 else
2396 DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
2397 name, desc, le32_to_cpu(dma_desc->addr_lo),
2398 le16_to_cpu(dma_desc->len),
2399 le16_to_cpu(dma_desc->cmd));
2400
2401 desc += host->desc_sz;
2402
2403 if (dma_desc->cmd & cpu_to_le16(ADMA2_END))
2404 break;
2405 }
2406 }
2407 #else
2408 static void sdhci_adma_show_error(struct sdhci_host *host) { }
2409 #endif
2410
2411 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
2412 {
2413 u32 command;
2414 BUG_ON(intmask == 0);
2415
2416 /* CMD19 generates _only_ Buffer Read Ready interrupt */
2417 if (intmask & SDHCI_INT_DATA_AVAIL) {
2418 command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
2419 if (command == MMC_SEND_TUNING_BLOCK ||
2420 command == MMC_SEND_TUNING_BLOCK_HS200) {
2421 host->tuning_done = 1;
2422 wake_up(&host->buf_ready_int);
2423 return;
2424 }
2425 }
2426
2427 if (!host->data) {
2428 /*
2429 * The "data complete" interrupt is also used to
2430 * indicate that a busy state has ended. See comment
2431 * above in sdhci_cmd_irq().
2432 */
2433 if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
2434 if (intmask & SDHCI_INT_DATA_TIMEOUT) {
2435 host->cmd->error = -ETIMEDOUT;
2436 tasklet_schedule(&host->finish_tasklet);
2437 return;
2438 }
2439 if (intmask & SDHCI_INT_DATA_END) {
2440 /*
2441 * Some cards handle busy-end interrupt
2442 * before the command completed, so make
2443 * sure we do things in the proper order.
2444 */
2445 if (host->busy_handle)
2446 sdhci_finish_command(host);
2447 else
2448 host->busy_handle = 1;
2449 return;
2450 }
2451 }
2452
2453 pr_err("%s: Got data interrupt 0x%08x even "
2454 "though no data operation was in progress.\n",
2455 mmc_hostname(host->mmc), (unsigned)intmask);
2456 sdhci_dumpregs(host);
2457
2458 return;
2459 }
2460
2461 if (intmask & SDHCI_INT_DATA_TIMEOUT)
2462 host->data->error = -ETIMEDOUT;
2463 else if (intmask & SDHCI_INT_DATA_END_BIT)
2464 host->data->error = -EILSEQ;
2465 else if ((intmask & SDHCI_INT_DATA_CRC) &&
2466 SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
2467 != MMC_BUS_TEST_R)
2468 host->data->error = -EILSEQ;
2469 else if (intmask & SDHCI_INT_ADMA_ERROR) {
2470 pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
2471 sdhci_adma_show_error(host);
2472 host->data->error = -EIO;
2473 if (host->ops->adma_workaround)
2474 host->ops->adma_workaround(host, intmask);
2475 }
2476
2477 if (host->data->error)
2478 sdhci_finish_data(host);
2479 else {
2480 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
2481 sdhci_transfer_pio(host);
2482
2483 /*
2484 * We currently don't do anything fancy with DMA
2485 * boundaries, but as we can't disable the feature
2486 * we need to at least restart the transfer.
2487 *
2488 * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS)
2489 * should return a valid address to continue from, but as
2490 * some controllers are faulty, don't trust them.
2491 */
2492 if (intmask & SDHCI_INT_DMA_END) {
2493 u32 dmastart, dmanow;
2494 dmastart = sg_dma_address(host->data->sg);
2495 dmanow = dmastart + host->data->bytes_xfered;
2496 /*
2497 * Force update to the next DMA block boundary.
2498 */
2499 dmanow = (dmanow &
2500 ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
2501 SDHCI_DEFAULT_BOUNDARY_SIZE;
2502 host->data->bytes_xfered = dmanow - dmastart;
2503 DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
2504 " next 0x%08x\n",
2505 mmc_hostname(host->mmc), dmastart,
2506 host->data->bytes_xfered, dmanow);
2507 sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
2508 }
2509
2510 if (intmask & SDHCI_INT_DATA_END) {
2511 if (host->cmd) {
2512 /*
2513 * Data managed to finish before the
2514 * command completed. Make sure we do
2515 * things in the proper order.
2516 */
2517 host->data_early = 1;
2518 } else {
2519 sdhci_finish_data(host);
2520 }
2521 }
2522 }
2523 }
2524
2525 static irqreturn_t sdhci_irq(int irq, void *dev_id)
2526 {
2527 irqreturn_t result = IRQ_NONE;
2528 struct sdhci_host *host = dev_id;
2529 u32 intmask, mask, unexpected = 0;
2530 int max_loops = 16;
2531
2532 spin_lock(&host->lock);
2533
2534 if (host->runtime_suspended && !sdhci_sdio_irq_enabled(host)) {
2535 spin_unlock(&host->lock);
2536 return IRQ_NONE;
2537 }
2538
2539 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
2540 if (!intmask || intmask == 0xffffffff) {
2541 result = IRQ_NONE;
2542 goto out;
2543 }
2544
2545 do {
2546 /* Clear selected interrupts. */
2547 mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
2548 SDHCI_INT_BUS_POWER);
2549 sdhci_writel(host, mask, SDHCI_INT_STATUS);
2550
2551 DBG("*** %s got interrupt: 0x%08x\n",
2552 mmc_hostname(host->mmc), intmask);
2553
2554 if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
2555 u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
2556 SDHCI_CARD_PRESENT;
2557
2558 /*
2559 * There is a observation on i.mx esdhc. INSERT
2560 * bit will be immediately set again when it gets
2561 * cleared, if a card is inserted. We have to mask
2562 * the irq to prevent interrupt storm which will
2563 * freeze the system. And the REMOVE gets the
2564 * same situation.
2565 *
2566 * More testing are needed here to ensure it works
2567 * for other platforms though.
2568 */
2569 host->ier &= ~(SDHCI_INT_CARD_INSERT |
2570 SDHCI_INT_CARD_REMOVE);
2571 host->ier |= present ? SDHCI_INT_CARD_REMOVE :
2572 SDHCI_INT_CARD_INSERT;
2573 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
2574 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
2575
2576 sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
2577 SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
2578
2579 host->thread_isr |= intmask & (SDHCI_INT_CARD_INSERT |
2580 SDHCI_INT_CARD_REMOVE);
2581 result = IRQ_WAKE_THREAD;
2582 }
2583
2584 if (intmask & SDHCI_INT_CMD_MASK)
2585 sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK,
2586 &intmask);
2587
2588 if (intmask & SDHCI_INT_DATA_MASK)
2589 sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
2590
2591 if (intmask & SDHCI_INT_BUS_POWER)
2592 pr_err("%s: Card is consuming too much power!\n",
2593 mmc_hostname(host->mmc));
2594
2595 if (intmask & SDHCI_INT_CARD_INT) {
2596 sdhci_enable_sdio_irq_nolock(host, false);
2597 host->thread_isr |= SDHCI_INT_CARD_INT;
2598 result = IRQ_WAKE_THREAD;
2599 }
2600
2601 intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
2602 SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
2603 SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER |
2604 SDHCI_INT_CARD_INT);
2605
2606 if (intmask) {
2607 unexpected |= intmask;
2608 sdhci_writel(host, intmask, SDHCI_INT_STATUS);
2609 }
2610
2611 if (result == IRQ_NONE)
2612 result = IRQ_HANDLED;
2613
2614 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
2615 } while (intmask && --max_loops);
2616 out:
2617 spin_unlock(&host->lock);
2618
2619 if (unexpected) {
2620 pr_err("%s: Unexpected interrupt 0x%08x.\n",
2621 mmc_hostname(host->mmc), unexpected);
2622 sdhci_dumpregs(host);
2623 }
2624
2625 return result;
2626 }
2627
2628 static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
2629 {
2630 struct sdhci_host *host = dev_id;
2631 unsigned long flags;
2632 u32 isr;
2633
2634 spin_lock_irqsave(&host->lock, flags);
2635 isr = host->thread_isr;
2636 host->thread_isr = 0;
2637 spin_unlock_irqrestore(&host->lock, flags);
2638
2639 if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
2640 sdhci_card_event(host->mmc);
2641 mmc_detect_change(host->mmc, msecs_to_jiffies(200));
2642 }
2643
2644 if (isr & SDHCI_INT_CARD_INT) {
2645 sdio_run_irqs(host->mmc);
2646
2647 spin_lock_irqsave(&host->lock, flags);
2648 if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
2649 sdhci_enable_sdio_irq_nolock(host, true);
2650 spin_unlock_irqrestore(&host->lock, flags);
2651 }
2652
2653 return isr ? IRQ_HANDLED : IRQ_NONE;
2654 }
2655
2656 /*****************************************************************************\
2657 * *
2658 * Suspend/resume *
2659 * *
2660 \*****************************************************************************/
2661
2662 #ifdef CONFIG_PM
2663 void sdhci_enable_irq_wakeups(struct sdhci_host *host)
2664 {
2665 u8 val;
2666 u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
2667 | SDHCI_WAKE_ON_INT;
2668
2669 val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
2670 val |= mask ;
2671 /* Avoid fake wake up */
2672 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
2673 val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE);
2674 sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
2675 }
2676 EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
2677
2678 static void sdhci_disable_irq_wakeups(struct sdhci_host *host)
2679 {
2680 u8 val;
2681 u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
2682 | SDHCI_WAKE_ON_INT;
2683
2684 val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
2685 val &= ~mask;
2686 sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
2687 }
2688
2689 int sdhci_suspend_host(struct sdhci_host *host)
2690 {
2691 sdhci_disable_card_detection(host);
2692
2693 mmc_retune_timer_stop(host->mmc);
2694 mmc_retune_needed(host->mmc);
2695
2696 if (!device_may_wakeup(mmc_dev(host->mmc))) {
2697 host->ier = 0;
2698 sdhci_writel(host, 0, SDHCI_INT_ENABLE);
2699 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
2700 free_irq(host->irq, host);
2701 } else {
2702 sdhci_enable_irq_wakeups(host);
2703 enable_irq_wake(host->irq);
2704 }
2705 return 0;
2706 }
2707
2708 EXPORT_SYMBOL_GPL(sdhci_suspend_host);
2709
2710 int sdhci_resume_host(struct sdhci_host *host)
2711 {
2712 int ret = 0;
2713
2714 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2715 if (host->ops->enable_dma)
2716 host->ops->enable_dma(host);
2717 }
2718
2719 if (!device_may_wakeup(mmc_dev(host->mmc))) {
2720 ret = request_threaded_irq(host->irq, sdhci_irq,
2721 sdhci_thread_irq, IRQF_SHARED,
2722 mmc_hostname(host->mmc), host);
2723 if (ret)
2724 return ret;
2725 } else {
2726 sdhci_disable_irq_wakeups(host);
2727 disable_irq_wake(host->irq);
2728 }
2729
2730 if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) &&
2731 (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) {
2732 /* Card keeps power but host controller does not */
2733 sdhci_init(host, 0);
2734 host->pwr = 0;
2735 host->clock = 0;
2736 sdhci_do_set_ios(host, &host->mmc->ios);
2737 } else {
2738 sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
2739 mmiowb();
2740 }
2741
2742 sdhci_enable_card_detection(host);
2743
2744 return ret;
2745 }
2746
2747 EXPORT_SYMBOL_GPL(sdhci_resume_host);
2748
2749 static int sdhci_runtime_pm_get(struct sdhci_host *host)
2750 {
2751 return pm_runtime_get_sync(host->mmc->parent);
2752 }
2753
2754 static int sdhci_runtime_pm_put(struct sdhci_host *host)
2755 {
2756 pm_runtime_mark_last_busy(host->mmc->parent);
2757 return pm_runtime_put_autosuspend(host->mmc->parent);
2758 }
2759
2760 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
2761 {
2762 if (host->runtime_suspended || host->bus_on)
2763 return;
2764 host->bus_on = true;
2765 pm_runtime_get_noresume(host->mmc->parent);
2766 }
2767
2768 static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
2769 {
2770 if (host->runtime_suspended || !host->bus_on)
2771 return;
2772 host->bus_on = false;
2773 pm_runtime_put_noidle(host->mmc->parent);
2774 }
2775
2776 int sdhci_runtime_suspend_host(struct sdhci_host *host)
2777 {
2778 unsigned long flags;
2779
2780 mmc_retune_timer_stop(host->mmc);
2781 mmc_retune_needed(host->mmc);
2782
2783 spin_lock_irqsave(&host->lock, flags);
2784 host->ier &= SDHCI_INT_CARD_INT;
2785 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
2786 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
2787 spin_unlock_irqrestore(&host->lock, flags);
2788
2789 synchronize_hardirq(host->irq);
2790
2791 spin_lock_irqsave(&host->lock, flags);
2792 host->runtime_suspended = true;
2793 spin_unlock_irqrestore(&host->lock, flags);
2794
2795 return 0;
2796 }
2797 EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host);
2798
2799 int sdhci_runtime_resume_host(struct sdhci_host *host)
2800 {
2801 unsigned long flags;
2802 int host_flags = host->flags;
2803
2804 if (host_flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2805 if (host->ops->enable_dma)
2806 host->ops->enable_dma(host);
2807 }
2808
2809 sdhci_init(host, 0);
2810
2811 /* Force clock and power re-program */
2812 host->pwr = 0;
2813 host->clock = 0;
2814 sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
2815 sdhci_do_set_ios(host, &host->mmc->ios);
2816
2817 if ((host_flags & SDHCI_PV_ENABLED) &&
2818 !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
2819 spin_lock_irqsave(&host->lock, flags);
2820 sdhci_enable_preset_value(host, true);
2821 spin_unlock_irqrestore(&host->lock, flags);
2822 }
2823
2824 spin_lock_irqsave(&host->lock, flags);
2825
2826 host->runtime_suspended = false;
2827
2828 /* Enable SDIO IRQ */
2829 if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
2830 sdhci_enable_sdio_irq_nolock(host, true);
2831
2832 /* Enable Card Detection */
2833 sdhci_enable_card_detection(host);
2834
2835 spin_unlock_irqrestore(&host->lock, flags);
2836
2837 return 0;
2838 }
2839 EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host);
2840
2841 #endif /* CONFIG_PM */
2842
2843 /*****************************************************************************\
2844 * *
2845 * Device allocation/registration *
2846 * *
2847 \*****************************************************************************/
2848
2849 struct sdhci_host *sdhci_alloc_host(struct device *dev,
2850 size_t priv_size)
2851 {
2852 struct mmc_host *mmc;
2853 struct sdhci_host *host;
2854
2855 WARN_ON(dev == NULL);
2856
2857 mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
2858 if (!mmc)
2859 return ERR_PTR(-ENOMEM);
2860
2861 host = mmc_priv(mmc);
2862 host->mmc = mmc;
2863
2864 return host;
2865 }
2866
2867 EXPORT_SYMBOL_GPL(sdhci_alloc_host);
2868
2869 int sdhci_add_host(struct sdhci_host *host)
2870 {
2871 struct mmc_host *mmc;
2872 u32 caps[2] = {0, 0};
2873 u32 max_current_caps;
2874 unsigned int ocr_avail;
2875 unsigned int override_timeout_clk;
2876 u32 max_clk;
2877 int ret;
2878
2879 WARN_ON(host == NULL);
2880 if (host == NULL)
2881 return -EINVAL;
2882
2883 mmc = host->mmc;
2884
2885 if (debug_quirks)
2886 host->quirks = debug_quirks;
2887 if (debug_quirks2)
2888 host->quirks2 = debug_quirks2;
2889
2890 override_timeout_clk = host->timeout_clk;
2891
2892 sdhci_do_reset(host, SDHCI_RESET_ALL);
2893
2894 host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
2895 host->version = (host->version & SDHCI_SPEC_VER_MASK)
2896 >> SDHCI_SPEC_VER_SHIFT;
2897 if (host->version > SDHCI_SPEC_300) {
2898 pr_err("%s: Unknown controller version (%d). "
2899 "You may experience problems.\n", mmc_hostname(mmc),
2900 host->version);
2901 }
2902
2903 caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
2904 sdhci_readl(host, SDHCI_CAPABILITIES);
2905
2906 if (host->version >= SDHCI_SPEC_300)
2907 caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ?
2908 host->caps1 :
2909 sdhci_readl(host, SDHCI_CAPABILITIES_1);
2910
2911 if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
2912 host->flags |= SDHCI_USE_SDMA;
2913 else if (!(caps[0] & SDHCI_CAN_DO_SDMA))
2914 DBG("Controller doesn't have SDMA capability\n");
2915 else
2916 host->flags |= SDHCI_USE_SDMA;
2917
2918 if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
2919 (host->flags & SDHCI_USE_SDMA)) {
2920 DBG("Disabling DMA as it is marked broken\n");
2921 host->flags &= ~SDHCI_USE_SDMA;
2922 }
2923
2924 if ((host->version >= SDHCI_SPEC_200) &&
2925 (caps[0] & SDHCI_CAN_DO_ADMA2))
2926 host->flags |= SDHCI_USE_ADMA;
2927
2928 if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
2929 (host->flags & SDHCI_USE_ADMA)) {
2930 DBG("Disabling ADMA as it is marked broken\n");
2931 host->flags &= ~SDHCI_USE_ADMA;
2932 }
2933
2934 /*
2935 * It is assumed that a 64-bit capable device has set a 64-bit DMA mask
2936 * and *must* do 64-bit DMA. A driver has the opportunity to change
2937 * that during the first call to ->enable_dma(). Similarly
2938 * SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to
2939 * implement.
2940 */
2941 if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT)
2942 host->flags |= SDHCI_USE_64_BIT_DMA;
2943
2944 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2945 if (host->ops->enable_dma) {
2946 if (host->ops->enable_dma(host)) {
2947 pr_warn("%s: No suitable DMA available - falling back to PIO\n",
2948 mmc_hostname(mmc));
2949 host->flags &=
2950 ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
2951 }
2952 }
2953 }
2954
2955 /* SDMA does not support 64-bit DMA */
2956 if (host->flags & SDHCI_USE_64_BIT_DMA)
2957 host->flags &= ~SDHCI_USE_SDMA;
2958
2959 if (host->flags & SDHCI_USE_ADMA) {
2960 /*
2961 * The DMA descriptor table size is calculated as the maximum
2962 * number of segments times 2, to allow for an alignment
2963 * descriptor for each segment, plus 1 for a nop end descriptor,
2964 * all multipled by the descriptor size.
2965 */
2966 if (host->flags & SDHCI_USE_64_BIT_DMA) {
2967 host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
2968 SDHCI_ADMA2_64_DESC_SZ;
2969 host->align_buffer_sz = SDHCI_MAX_SEGS *
2970 SDHCI_ADMA2_64_ALIGN;
2971 host->desc_sz = SDHCI_ADMA2_64_DESC_SZ;
2972 host->align_sz = SDHCI_ADMA2_64_ALIGN;
2973 host->align_mask = SDHCI_ADMA2_64_ALIGN - 1;
2974 } else {
2975 host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
2976 SDHCI_ADMA2_32_DESC_SZ;
2977 host->align_buffer_sz = SDHCI_MAX_SEGS *
2978 SDHCI_ADMA2_32_ALIGN;
2979 host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
2980 host->align_sz = SDHCI_ADMA2_32_ALIGN;
2981 host->align_mask = SDHCI_ADMA2_32_ALIGN - 1;
2982 }
2983 host->adma_table = dma_alloc_coherent(mmc_dev(mmc),
2984 host->adma_table_sz,
2985 &host->adma_addr,
2986 GFP_KERNEL);
2987 host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL);
2988 if (!host->adma_table || !host->align_buffer) {
2989 if (host->adma_table)
2990 dma_free_coherent(mmc_dev(mmc),
2991 host->adma_table_sz,
2992 host->adma_table,
2993 host->adma_addr);
2994 kfree(host->align_buffer);
2995 pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
2996 mmc_hostname(mmc));
2997 host->flags &= ~SDHCI_USE_ADMA;
2998 host->adma_table = NULL;
2999 host->align_buffer = NULL;
3000 } else if (host->adma_addr & host->align_mask) {
3001 pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
3002 mmc_hostname(mmc));
3003 host->flags &= ~SDHCI_USE_ADMA;
3004 dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
3005 host->adma_table, host->adma_addr);
3006 kfree(host->align_buffer);
3007 host->adma_table = NULL;
3008 host->align_buffer = NULL;
3009 }
3010 }
3011
3012 /*
3013 * If we use DMA, then it's up to the caller to set the DMA
3014 * mask, but PIO does not need the hw shim so we set a new
3015 * mask here in that case.
3016 */
3017 if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
3018 host->dma_mask = DMA_BIT_MASK(64);
3019 mmc_dev(mmc)->dma_mask = &host->dma_mask;
3020 }
3021
3022 if (host->version >= SDHCI_SPEC_300)
3023 host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK)
3024 >> SDHCI_CLOCK_BASE_SHIFT;
3025 else
3026 host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK)
3027 >> SDHCI_CLOCK_BASE_SHIFT;
3028
3029 host->max_clk *= 1000000;
3030 if (host->max_clk == 0 || host->quirks &
3031 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
3032 if (!host->ops->get_max_clock) {
3033 pr_err("%s: Hardware doesn't specify base clock "
3034 "frequency.\n", mmc_hostname(mmc));
3035 return -ENODEV;
3036 }
3037 host->max_clk = host->ops->get_max_clock(host);
3038 }
3039
3040 /*
3041 * In case of Host Controller v3.00, find out whether clock
3042 * multiplier is supported.
3043 */
3044 host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >>
3045 SDHCI_CLOCK_MUL_SHIFT;
3046
3047 /*
3048 * In case the value in Clock Multiplier is 0, then programmable
3049 * clock mode is not supported, otherwise the actual clock
3050 * multiplier is one more than the value of Clock Multiplier
3051 * in the Capabilities Register.
3052 */
3053 if (host->clk_mul)
3054 host->clk_mul += 1;
3055
3056 /*
3057 * Set host parameters.
3058 */
3059 mmc->ops = &sdhci_ops;
3060 max_clk = host->max_clk;
3061
3062 if (host->ops->get_min_clock)
3063 mmc->f_min = host->ops->get_min_clock(host);
3064 else if (host->version >= SDHCI_SPEC_300) {
3065 if (host->clk_mul) {
3066 mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
3067 max_clk = host->max_clk * host->clk_mul;
3068 } else
3069 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
3070 } else
3071 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
3072
3073 if (!mmc->f_max || (mmc->f_max && (mmc->f_max > max_clk)))
3074 mmc->f_max = max_clk;
3075
3076 if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
3077 host->timeout_clk = (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >>
3078 SDHCI_TIMEOUT_CLK_SHIFT;
3079 if (host->timeout_clk == 0) {
3080 if (host->ops->get_timeout_clock) {
3081 host->timeout_clk =
3082 host->ops->get_timeout_clock(host);
3083 } else {
3084 pr_err("%s: Hardware doesn't specify timeout clock frequency.\n",
3085 mmc_hostname(mmc));
3086 return -ENODEV;
3087 }
3088 }
3089
3090 if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
3091 host->timeout_clk *= 1000;
3092
3093 mmc->max_busy_timeout = host->ops->get_max_timeout_count ?
3094 host->ops->get_max_timeout_count(host) : 1 << 27;
3095 mmc->max_busy_timeout /= host->timeout_clk;
3096 }
3097
3098 if (override_timeout_clk)
3099 host->timeout_clk = override_timeout_clk;
3100
3101 mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
3102 mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
3103
3104 if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
3105 host->flags |= SDHCI_AUTO_CMD12;
3106
3107 /* Auto-CMD23 stuff only works in ADMA or PIO. */
3108 if ((host->version >= SDHCI_SPEC_300) &&
3109 ((host->flags & SDHCI_USE_ADMA) ||
3110 !(host->flags & SDHCI_USE_SDMA)) &&
3111 !(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) {
3112 host->flags |= SDHCI_AUTO_CMD23;
3113 DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc));
3114 } else {
3115 DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc));
3116 }
3117
3118 /*
3119 * A controller may support 8-bit width, but the board itself
3120 * might not have the pins brought out. Boards that support
3121 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
3122 * their platform code before calling sdhci_add_host(), and we
3123 * won't assume 8-bit width for hosts without that CAP.
3124 */
3125 if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
3126 mmc->caps |= MMC_CAP_4_BIT_DATA;
3127
3128 if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
3129 mmc->caps &= ~MMC_CAP_CMD23;
3130
3131 if (caps[0] & SDHCI_CAN_DO_HISPD)
3132 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
3133
3134 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
3135 !(mmc->caps & MMC_CAP_NONREMOVABLE) &&
3136 IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc)))
3137 mmc->caps |= MMC_CAP_NEEDS_POLL;
3138
3139 /* If there are external regulators, get them */
3140 if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER)
3141 return -EPROBE_DEFER;
3142
3143 /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
3144 if (!IS_ERR(mmc->supply.vqmmc)) {
3145 ret = regulator_enable(mmc->supply.vqmmc);
3146 if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
3147 1950000))
3148 caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
3149 SDHCI_SUPPORT_SDR50 |
3150 SDHCI_SUPPORT_DDR50);
3151 if (ret) {
3152 pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
3153 mmc_hostname(mmc), ret);
3154 mmc->supply.vqmmc = ERR_PTR(-EINVAL);
3155 }
3156 }
3157
3158 if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)
3159 caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
3160 SDHCI_SUPPORT_DDR50);
3161
3162 /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
3163 if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
3164 SDHCI_SUPPORT_DDR50))
3165 mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
3166
3167 /* SDR104 supports also implies SDR50 support */
3168 if (caps[1] & SDHCI_SUPPORT_SDR104) {
3169 mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50;
3170 /* SD3.0: SDR104 is supported so (for eMMC) the caps2
3171 * field can be promoted to support HS200.
3172 */
3173 if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
3174 mmc->caps2 |= MMC_CAP2_HS200;
3175 } else if (caps[1] & SDHCI_SUPPORT_SDR50)
3176 mmc->caps |= MMC_CAP_UHS_SDR50;
3177
3178 if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 &&
3179 (caps[1] & SDHCI_SUPPORT_HS400))
3180 mmc->caps2 |= MMC_CAP2_HS400;
3181
3182 if ((mmc->caps2 & MMC_CAP2_HSX00_1_2V) &&
3183 (IS_ERR(mmc->supply.vqmmc) ||
3184 !regulator_is_supported_voltage(mmc->supply.vqmmc, 1100000,
3185 1300000)))
3186 mmc->caps2 &= ~MMC_CAP2_HSX00_1_2V;
3187
3188 if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
3189 !(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
3190 mmc->caps |= MMC_CAP_UHS_DDR50;
3191
3192 /* Does the host need tuning for SDR50? */
3193 if (caps[1] & SDHCI_USE_SDR50_TUNING)
3194 host->flags |= SDHCI_SDR50_NEEDS_TUNING;
3195
3196 /* Does the host need tuning for SDR104 / HS200? */
3197 if (mmc->caps2 & MMC_CAP2_HS200)
3198 host->flags |= SDHCI_SDR104_NEEDS_TUNING;
3199
3200 /* Driver Type(s) (A, C, D) supported by the host */
3201 if (caps[1] & SDHCI_DRIVER_TYPE_A)
3202 mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
3203 if (caps[1] & SDHCI_DRIVER_TYPE_C)
3204 mmc->caps |= MMC_CAP_DRIVER_TYPE_C;
3205 if (caps[1] & SDHCI_DRIVER_TYPE_D)
3206 mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
3207
3208 /* Initial value for re-tuning timer count */
3209 host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
3210 SDHCI_RETUNING_TIMER_COUNT_SHIFT;
3211
3212 /*
3213 * In case Re-tuning Timer is not disabled, the actual value of
3214 * re-tuning timer will be 2 ^ (n - 1).
3215 */
3216 if (host->tuning_count)
3217 host->tuning_count = 1 << (host->tuning_count - 1);
3218
3219 /* Re-tuning mode supported by the Host Controller */
3220 host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >>
3221 SDHCI_RETUNING_MODE_SHIFT;
3222
3223 ocr_avail = 0;
3224
3225 /*
3226 * According to SD Host Controller spec v3.00, if the Host System
3227 * can afford more than 150mA, Host Driver should set XPC to 1. Also
3228 * the value is meaningful only if Voltage Support in the Capabilities
3229 * register is set. The actual current value is 4 times the register
3230 * value.
3231 */
3232 max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
3233 if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
3234 int curr = regulator_get_current_limit(mmc->supply.vmmc);
3235 if (curr > 0) {
3236
3237 /* convert to SDHCI_MAX_CURRENT format */
3238 curr = curr/1000; /* convert to mA */
3239 curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER;
3240
3241 curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT);
3242 max_current_caps =
3243 (curr << SDHCI_MAX_CURRENT_330_SHIFT) |
3244 (curr << SDHCI_MAX_CURRENT_300_SHIFT) |
3245 (curr << SDHCI_MAX_CURRENT_180_SHIFT);
3246 }
3247 }
3248
3249 if (caps[0] & SDHCI_CAN_VDD_330) {
3250 ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
3251
3252 mmc->max_current_330 = ((max_current_caps &
3253 SDHCI_MAX_CURRENT_330_MASK) >>
3254 SDHCI_MAX_CURRENT_330_SHIFT) *
3255 SDHCI_MAX_CURRENT_MULTIPLIER;
3256 }
3257 if (caps[0] & SDHCI_CAN_VDD_300) {
3258 ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
3259
3260 mmc->max_current_300 = ((max_current_caps &
3261 SDHCI_MAX_CURRENT_300_MASK) >>
3262 SDHCI_MAX_CURRENT_300_SHIFT) *
3263 SDHCI_MAX_CURRENT_MULTIPLIER;
3264 }
3265 if (caps[0] & SDHCI_CAN_VDD_180) {
3266 ocr_avail |= MMC_VDD_165_195;
3267
3268 mmc->max_current_180 = ((max_current_caps &
3269 SDHCI_MAX_CURRENT_180_MASK) >>
3270 SDHCI_MAX_CURRENT_180_SHIFT) *
3271 SDHCI_MAX_CURRENT_MULTIPLIER;
3272 }
3273
3274 /* If OCR set by host, use it instead. */
3275 if (host->ocr_mask)
3276 ocr_avail = host->ocr_mask;
3277
3278 /* If OCR set by external regulators, give it highest prio. */
3279 if (mmc->ocr_avail)
3280 ocr_avail = mmc->ocr_avail;
3281
3282 mmc->ocr_avail = ocr_avail;
3283 mmc->ocr_avail_sdio = ocr_avail;
3284 if (host->ocr_avail_sdio)
3285 mmc->ocr_avail_sdio &= host->ocr_avail_sdio;
3286 mmc->ocr_avail_sd = ocr_avail;
3287 if (host->ocr_avail_sd)
3288 mmc->ocr_avail_sd &= host->ocr_avail_sd;
3289 else /* normal SD controllers don't support 1.8V */
3290 mmc->ocr_avail_sd &= ~MMC_VDD_165_195;
3291 mmc->ocr_avail_mmc = ocr_avail;
3292 if (host->ocr_avail_mmc)
3293 mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
3294
3295 if (mmc->ocr_avail == 0) {
3296 pr_err("%s: Hardware doesn't report any "
3297 "support voltages.\n", mmc_hostname(mmc));
3298 return -ENODEV;
3299 }
3300
3301 spin_lock_init(&host->lock);
3302
3303 /*
3304 * Maximum number of segments. Depends on if the hardware
3305 * can do scatter/gather or not.
3306 */
3307 if (host->flags & SDHCI_USE_ADMA)
3308 mmc->max_segs = SDHCI_MAX_SEGS;
3309 else if (host->flags & SDHCI_USE_SDMA)
3310 mmc->max_segs = 1;
3311 else /* PIO */
3312 mmc->max_segs = SDHCI_MAX_SEGS;
3313
3314 /*
3315 * Maximum number of sectors in one transfer. Limited by SDMA boundary
3316 * size (512KiB). Note some tuning modes impose a 4MiB limit, but this
3317 * is less anyway.
3318 */
3319 mmc->max_req_size = 524288;
3320
3321 /*
3322 * Maximum segment size. Could be one segment with the maximum number
3323 * of bytes. When doing hardware scatter/gather, each entry cannot
3324 * be larger than 64 KiB though.
3325 */
3326 if (host->flags & SDHCI_USE_ADMA) {
3327 if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC)
3328 mmc->max_seg_size = 65535;
3329 else
3330 mmc->max_seg_size = 65536;
3331 } else {
3332 mmc->max_seg_size = mmc->max_req_size;
3333 }
3334
3335 /*
3336 * Maximum block size. This varies from controller to controller and
3337 * is specified in the capabilities register.
3338 */
3339 if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
3340 mmc->max_blk_size = 2;
3341 } else {
3342 mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
3343 SDHCI_MAX_BLOCK_SHIFT;
3344 if (mmc->max_blk_size >= 3) {
3345 pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
3346 mmc_hostname(mmc));
3347 mmc->max_blk_size = 0;
3348 }
3349 }
3350
3351 mmc->max_blk_size = 512 << mmc->max_blk_size;
3352
3353 /*
3354 * Maximum block count.
3355 */
3356 mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
3357
3358 /*
3359 * Init tasklets.
3360 */
3361 tasklet_init(&host->finish_tasklet,
3362 sdhci_tasklet_finish, (unsigned long)host);
3363
3364 setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
3365
3366 init_waitqueue_head(&host->buf_ready_int);
3367
3368 sdhci_init(host, 0);
3369
3370 ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq,
3371 IRQF_SHARED, mmc_hostname(mmc), host);
3372 if (ret) {
3373 pr_err("%s: Failed to request IRQ %d: %d\n",
3374 mmc_hostname(mmc), host->irq, ret);
3375 goto untasklet;
3376 }
3377
3378 #ifdef CONFIG_MMC_DEBUG
3379 sdhci_dumpregs(host);
3380 #endif
3381
3382 #ifdef SDHCI_USE_LEDS_CLASS
3383 snprintf(host->led_name, sizeof(host->led_name),
3384 "%s::", mmc_hostname(mmc));
3385 host->led.name = host->led_name;
3386 host->led.brightness = LED_OFF;
3387 host->led.default_trigger = mmc_hostname(mmc);
3388 host->led.brightness_set = sdhci_led_control;
3389
3390 ret = led_classdev_register(mmc_dev(mmc), &host->led);
3391 if (ret) {
3392 pr_err("%s: Failed to register LED device: %d\n",
3393 mmc_hostname(mmc), ret);
3394 goto reset;
3395 }
3396 #endif
3397
3398 mmiowb();
3399
3400 mmc_add_host(mmc);
3401
3402 pr_info("%s: SDHCI controller on %s [%s] using %s\n",
3403 mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
3404 (host->flags & SDHCI_USE_ADMA) ?
3405 (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" :
3406 (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
3407
3408 sdhci_enable_card_detection(host);
3409
3410 return 0;
3411
3412 #ifdef SDHCI_USE_LEDS_CLASS
3413 reset:
3414 sdhci_do_reset(host, SDHCI_RESET_ALL);
3415 sdhci_writel(host, 0, SDHCI_INT_ENABLE);
3416 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
3417 free_irq(host->irq, host);
3418 #endif
3419 untasklet:
3420 tasklet_kill(&host->finish_tasklet);
3421
3422 return ret;
3423 }
3424
3425 EXPORT_SYMBOL_GPL(sdhci_add_host);
3426
3427 void sdhci_remove_host(struct sdhci_host *host, int dead)
3428 {
3429 struct mmc_host *mmc = host->mmc;
3430 unsigned long flags;
3431
3432 if (dead) {
3433 spin_lock_irqsave(&host->lock, flags);
3434
3435 host->flags |= SDHCI_DEVICE_DEAD;
3436
3437 if (host->mrq) {
3438 pr_err("%s: Controller removed during "
3439 " transfer!\n", mmc_hostname(mmc));
3440
3441 host->mrq->cmd->error = -ENOMEDIUM;
3442 tasklet_schedule(&host->finish_tasklet);
3443 }
3444
3445 spin_unlock_irqrestore(&host->lock, flags);
3446 }
3447
3448 sdhci_disable_card_detection(host);
3449
3450 mmc_remove_host(mmc);
3451
3452 #ifdef SDHCI_USE_LEDS_CLASS
3453 led_classdev_unregister(&host->led);
3454 #endif
3455
3456 if (!dead)
3457 sdhci_do_reset(host, SDHCI_RESET_ALL);
3458
3459 sdhci_writel(host, 0, SDHCI_INT_ENABLE);
3460 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
3461 free_irq(host->irq, host);
3462
3463 del_timer_sync(&host->timer);
3464
3465 tasklet_kill(&host->finish_tasklet);
3466
3467 if (!IS_ERR(mmc->supply.vqmmc))
3468 regulator_disable(mmc->supply.vqmmc);
3469
3470 if (host->adma_table)
3471 dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
3472 host->adma_table, host->adma_addr);
3473 kfree(host->align_buffer);
3474
3475 host->adma_table = NULL;
3476 host->align_buffer = NULL;
3477 }
3478
3479 EXPORT_SYMBOL_GPL(sdhci_remove_host);
3480
3481 void sdhci_free_host(struct sdhci_host *host)
3482 {
3483 mmc_free_host(host->mmc);
3484 }
3485
3486 EXPORT_SYMBOL_GPL(sdhci_free_host);
3487
3488 /*****************************************************************************\
3489 * *
3490 * Driver init/exit *
3491 * *
3492 \*****************************************************************************/
3493
3494 static int __init sdhci_drv_init(void)
3495 {
3496 pr_info(DRIVER_NAME
3497 ": Secure Digital Host Controller Interface driver\n");
3498 pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
3499
3500 return 0;
3501 }
3502
3503 static void __exit sdhci_drv_exit(void)
3504 {
3505 }
3506
3507 module_init(sdhci_drv_init);
3508 module_exit(sdhci_drv_exit);
3509
3510 module_param(debug_quirks, uint, 0444);
3511 module_param(debug_quirks2, uint, 0444);
3512
3513 MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
3514 MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
3515 MODULE_LICENSE("GPL");
3516
3517 MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
3518 MODULE_PARM_DESC(debug_quirks2, "Force certain other quirks.");
ubuntu-zesty-kernel mirror