UBUNTU: Ubuntu-4.15.0-96.97

[mirror_ubuntu-bionic-kernel.git] / drivers / mmc / host / sdhci.h

/*
 *  linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
 *
 * Header file for Host Controller registers and I/O accessors.
 *
 *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or (at
 * your option) any later version.
 */
#ifndef __SDHCI_HW_H
#define __SDHCI_HW_H

#include <linux/scatterlist.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/interrupt.h>

#include <linux/mmc/host.h>

/*
 * Controller registers
 */

#define SDHCI_DMA_ADDRESS       0x00
#define SDHCI_ARGUMENT2         SDHCI_DMA_ADDRESS

#define SDHCI_BLOCK_SIZE        0x04
#define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))

#define SDHCI_BLOCK_COUNT       0x06

#define SDHCI_ARGUMENT          0x08

#define SDHCI_TRANSFER_MODE     0x0C
#define  SDHCI_TRNS_DMA         0x01
#define  SDHCI_TRNS_BLK_CNT_EN  0x02
#define  SDHCI_TRNS_AUTO_CMD12  0x04
#define  SDHCI_TRNS_AUTO_CMD23  0x08
#define  SDHCI_TRNS_READ        0x10
#define  SDHCI_TRNS_MULTI       0x20

#define SDHCI_COMMAND           0x0E
#define  SDHCI_CMD_RESP_MASK    0x03
#define  SDHCI_CMD_CRC          0x08
#define  SDHCI_CMD_INDEX        0x10
#define  SDHCI_CMD_DATA         0x20
#define  SDHCI_CMD_ABORTCMD     0xC0

#define  SDHCI_CMD_RESP_NONE    0x00
#define  SDHCI_CMD_RESP_LONG    0x01
#define  SDHCI_CMD_RESP_SHORT   0x02
#define  SDHCI_CMD_RESP_SHORT_BUSY 0x03

#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)

#define SDHCI_RESPONSE          0x10

#define SDHCI_BUFFER            0x20

#define SDHCI_PRESENT_STATE     0x24
#define  SDHCI_CMD_INHIBIT      0x00000001
#define  SDHCI_DATA_INHIBIT     0x00000002
#define  SDHCI_DOING_WRITE      0x00000100
#define  SDHCI_DOING_READ       0x00000200
#define  SDHCI_SPACE_AVAILABLE  0x00000400
#define  SDHCI_DATA_AVAILABLE   0x00000800
#define  SDHCI_CARD_PRESENT     0x00010000
#define  SDHCI_WRITE_PROTECT    0x00080000
#define  SDHCI_DATA_LVL_MASK    0x00F00000
#define   SDHCI_DATA_LVL_SHIFT  20
#define   SDHCI_DATA_0_LVL_MASK 0x00100000
#define  SDHCI_CMD_LVL          0x01000000

#define SDHCI_HOST_CONTROL      0x28
#define  SDHCI_CTRL_LED         0x01
#define  SDHCI_CTRL_4BITBUS     0x02
#define  SDHCI_CTRL_HISPD       0x04
#define  SDHCI_CTRL_DMA_MASK    0x18
#define   SDHCI_CTRL_SDMA       0x00
#define   SDHCI_CTRL_ADMA1      0x08
#define   SDHCI_CTRL_ADMA32     0x10
#define   SDHCI_CTRL_ADMA64     0x18
#define   SDHCI_CTRL_8BITBUS    0x20
#define  SDHCI_CTRL_CDTEST_INS  0x40
#define  SDHCI_CTRL_CDTEST_EN   0x80

#define SDHCI_POWER_CONTROL     0x29
#define  SDHCI_POWER_ON         0x01
#define  SDHCI_POWER_180        0x0A
#define  SDHCI_POWER_300        0x0C
#define  SDHCI_POWER_330        0x0E

#define SDHCI_BLOCK_GAP_CONTROL 0x2A

#define SDHCI_WAKE_UP_CONTROL   0x2B
#define  SDHCI_WAKE_ON_INT      0x01
#define  SDHCI_WAKE_ON_INSERT   0x02
#define  SDHCI_WAKE_ON_REMOVE   0x04

#define SDHCI_CLOCK_CONTROL     0x2C
#define  SDHCI_DIVIDER_SHIFT    8
#define  SDHCI_DIVIDER_HI_SHIFT 6
#define  SDHCI_DIV_MASK 0xFF
#define  SDHCI_DIV_MASK_LEN     8
#define  SDHCI_DIV_HI_MASK      0x300
#define  SDHCI_PROG_CLOCK_MODE  0x0020
#define  SDHCI_CLOCK_CARD_EN    0x0004
#define  SDHCI_CLOCK_INT_STABLE 0x0002
#define  SDHCI_CLOCK_INT_EN     0x0001

#define SDHCI_TIMEOUT_CONTROL   0x2E

#define SDHCI_SOFTWARE_RESET    0x2F
#define  SDHCI_RESET_ALL        0x01
#define  SDHCI_RESET_CMD        0x02
#define  SDHCI_RESET_DATA       0x04

#define SDHCI_INT_STATUS        0x30
#define SDHCI_INT_ENABLE        0x34
#define SDHCI_SIGNAL_ENABLE     0x38
#define  SDHCI_INT_RESPONSE     0x00000001
#define  SDHCI_INT_DATA_END     0x00000002
#define  SDHCI_INT_BLK_GAP      0x00000004
#define  SDHCI_INT_DMA_END      0x00000008
#define  SDHCI_INT_SPACE_AVAIL  0x00000010
#define  SDHCI_INT_DATA_AVAIL   0x00000020
#define  SDHCI_INT_CARD_INSERT  0x00000040
#define  SDHCI_INT_CARD_REMOVE  0x00000080
#define  SDHCI_INT_CARD_INT     0x00000100
#define  SDHCI_INT_RETUNE       0x00001000
#define  SDHCI_INT_CQE          0x00004000
#define  SDHCI_INT_ERROR        0x00008000
#define  SDHCI_INT_TIMEOUT      0x00010000
#define  SDHCI_INT_CRC          0x00020000
#define  SDHCI_INT_END_BIT      0x00040000
#define  SDHCI_INT_INDEX        0x00080000
#define  SDHCI_INT_DATA_TIMEOUT 0x00100000
#define  SDHCI_INT_DATA_CRC     0x00200000
#define  SDHCI_INT_DATA_END_BIT 0x00400000
#define  SDHCI_INT_BUS_POWER    0x00800000
#define  SDHCI_INT_AUTO_CMD_ERR 0x01000000
#define  SDHCI_INT_ADMA_ERROR   0x02000000

#define  SDHCI_INT_NORMAL_MASK  0x00007FFF
#define  SDHCI_INT_ERROR_MASK   0xFFFF8000

#define  SDHCI_INT_CMD_MASK     (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
                SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \
                SDHCI_INT_AUTO_CMD_ERR)
#define  SDHCI_INT_DATA_MASK    (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
                SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
                SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
                SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
                SDHCI_INT_BLK_GAP)
#define SDHCI_INT_ALL_MASK      ((unsigned int)-1)

#define SDHCI_CQE_INT_ERR_MASK ( \
        SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \
        SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \
        SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)

#define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE)

#define SDHCI_AUTO_CMD_STATUS   0x3C
#define  SDHCI_AUTO_CMD_TIMEOUT 0x00000002
#define  SDHCI_AUTO_CMD_CRC     0x00000004
#define  SDHCI_AUTO_CMD_END_BIT 0x00000008
#define  SDHCI_AUTO_CMD_INDEX   0x00000010

#define SDHCI_HOST_CONTROL2             0x3E
#define  SDHCI_CTRL_UHS_MASK            0x0007
#define   SDHCI_CTRL_UHS_SDR12          0x0000
#define   SDHCI_CTRL_UHS_SDR25          0x0001
#define   SDHCI_CTRL_UHS_SDR50          0x0002
#define   SDHCI_CTRL_UHS_SDR104         0x0003
#define   SDHCI_CTRL_UHS_DDR50          0x0004
#define   SDHCI_CTRL_HS400              0x0005 /* Non-standard */
#define  SDHCI_CTRL_VDD_180             0x0008
#define  SDHCI_CTRL_DRV_TYPE_MASK       0x0030
#define   SDHCI_CTRL_DRV_TYPE_B         0x0000
#define   SDHCI_CTRL_DRV_TYPE_A         0x0010
#define   SDHCI_CTRL_DRV_TYPE_C         0x0020
#define   SDHCI_CTRL_DRV_TYPE_D         0x0030
#define  SDHCI_CTRL_EXEC_TUNING         0x0040
#define  SDHCI_CTRL_TUNED_CLK           0x0080
#define  SDHCI_CTRL_PRESET_VAL_ENABLE   0x8000

#define SDHCI_CAPABILITIES      0x40
#define  SDHCI_TIMEOUT_CLK_MASK 0x0000003F
#define  SDHCI_TIMEOUT_CLK_SHIFT 0
#define  SDHCI_TIMEOUT_CLK_UNIT 0x00000080
#define  SDHCI_CLOCK_BASE_MASK  0x00003F00
#define  SDHCI_CLOCK_V3_BASE_MASK       0x0000FF00
#define  SDHCI_CLOCK_BASE_SHIFT 8
#define  SDHCI_MAX_BLOCK_MASK   0x00030000
#define  SDHCI_MAX_BLOCK_SHIFT  16
#define  SDHCI_CAN_DO_8BIT      0x00040000
#define  SDHCI_CAN_DO_ADMA2     0x00080000
#define  SDHCI_CAN_DO_ADMA1     0x00100000
#define  SDHCI_CAN_DO_HISPD     0x00200000
#define  SDHCI_CAN_DO_SDMA      0x00400000
#define  SDHCI_CAN_DO_SUSPEND   0x00800000
#define  SDHCI_CAN_VDD_330      0x01000000
#define  SDHCI_CAN_VDD_300      0x02000000
#define  SDHCI_CAN_VDD_180      0x04000000
#define  SDHCI_CAN_64BIT        0x10000000

#define  SDHCI_SUPPORT_SDR50    0x00000001
#define  SDHCI_SUPPORT_SDR104   0x00000002
#define  SDHCI_SUPPORT_DDR50    0x00000004
#define  SDHCI_DRIVER_TYPE_A    0x00000010
#define  SDHCI_DRIVER_TYPE_C    0x00000020
#define  SDHCI_DRIVER_TYPE_D    0x00000040
#define  SDHCI_RETUNING_TIMER_COUNT_MASK        0x00000F00
#define  SDHCI_RETUNING_TIMER_COUNT_SHIFT       8
#define  SDHCI_USE_SDR50_TUNING                 0x00002000
#define  SDHCI_RETUNING_MODE_MASK               0x0000C000
#define  SDHCI_RETUNING_MODE_SHIFT              14
#define  SDHCI_CLOCK_MUL_MASK   0x00FF0000
#define  SDHCI_CLOCK_MUL_SHIFT  16
#define  SDHCI_SUPPORT_HS400    0x80000000 /* Non-standard */

#define SDHCI_CAPABILITIES_1    0x44

#define SDHCI_MAX_CURRENT               0x48
#define  SDHCI_MAX_CURRENT_LIMIT        0xFF
#define  SDHCI_MAX_CURRENT_330_MASK     0x0000FF
#define  SDHCI_MAX_CURRENT_330_SHIFT    0
#define  SDHCI_MAX_CURRENT_300_MASK     0x00FF00
#define  SDHCI_MAX_CURRENT_300_SHIFT    8
#define  SDHCI_MAX_CURRENT_180_MASK     0xFF0000
#define  SDHCI_MAX_CURRENT_180_SHIFT    16
#define   SDHCI_MAX_CURRENT_MULTIPLIER  4

/* 4C-4F reserved for more max current */

#define SDHCI_SET_ACMD12_ERROR  0x50
#define SDHCI_SET_INT_ERROR     0x52

#define SDHCI_ADMA_ERROR        0x54

/* 55-57 reserved */

#define SDHCI_ADMA_ADDRESS      0x58
#define SDHCI_ADMA_ADDRESS_HI   0x5C

/* 60-FB reserved */

#define SDHCI_PRESET_FOR_SDR12 0x66
#define SDHCI_PRESET_FOR_SDR25 0x68
#define SDHCI_PRESET_FOR_SDR50 0x6A
#define SDHCI_PRESET_FOR_SDR104        0x6C
#define SDHCI_PRESET_FOR_DDR50 0x6E
#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
#define SDHCI_PRESET_DRV_MASK  0xC000
#define SDHCI_PRESET_DRV_SHIFT  14
#define SDHCI_PRESET_CLKGEN_SEL_MASK   0x400
#define SDHCI_PRESET_CLKGEN_SEL_SHIFT   10
#define SDHCI_PRESET_SDCLK_FREQ_MASK   0x3FF
#define SDHCI_PRESET_SDCLK_FREQ_SHIFT   0

#define SDHCI_SLOT_INT_STATUS   0xFC

#define SDHCI_HOST_VERSION      0xFE
#define  SDHCI_VENDOR_VER_MASK  0xFF00
#define  SDHCI_VENDOR_VER_SHIFT 8
#define  SDHCI_SPEC_VER_MASK    0x00FF
#define  SDHCI_SPEC_VER_SHIFT   0
#define   SDHCI_SPEC_100        0
#define   SDHCI_SPEC_200        1
#define   SDHCI_SPEC_300        2

/*
 * End of controller registers.
 */

#define SDHCI_MAX_DIV_SPEC_200  256
#define SDHCI_MAX_DIV_SPEC_300  2046

/*
 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
 */
#define SDHCI_DEFAULT_BOUNDARY_SIZE  (512 * 1024)
#define SDHCI_DEFAULT_BOUNDARY_ARG   (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)

/* ADMA2 32-bit DMA descriptor size */
#define SDHCI_ADMA2_32_DESC_SZ  8

/* ADMA2 32-bit descriptor */
struct sdhci_adma2_32_desc {
        __le16  cmd;
        __le16  len;
        __le32  addr;
}  __packed __aligned(4);

/* ADMA2 data alignment */
#define SDHCI_ADMA2_ALIGN       4
#define SDHCI_ADMA2_MASK        (SDHCI_ADMA2_ALIGN - 1)

/*
 * ADMA2 descriptor alignment.  Some controllers (e.g. Intel) require 8 byte
 * alignment for the descriptor table even in 32-bit DMA mode.  Memory
 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always.
 */
#define SDHCI_ADMA2_DESC_ALIGN  8

/* ADMA2 64-bit DMA descriptor size */
#define SDHCI_ADMA2_64_DESC_SZ  12

/*
 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
 * aligned.
 */
struct sdhci_adma2_64_desc {
        __le16  cmd;
        __le16  len;
        __le32  addr_lo;
        __le32  addr_hi;
}  __packed __aligned(4);

#define ADMA2_TRAN_VALID        0x21
#define ADMA2_NOP_END_VALID     0x3
#define ADMA2_END               0x2

/*
 * Maximum segments assuming a 512KiB maximum requisition size and a minimum
 * 4KiB page size.
 */
#define SDHCI_MAX_SEGS          128

/* Allow for a a command request and a data request at the same time */
#define SDHCI_MAX_MRQS          2

enum sdhci_cookie {
        COOKIE_UNMAPPED,
        COOKIE_PRE_MAPPED,      /* mapped by sdhci_pre_req() */
        COOKIE_MAPPED,          /* mapped by sdhci_prepare_data() */
};

struct sdhci_host {
        /* Data set by hardware interface driver */
        const char *hw_name;    /* Hardware bus name */

        unsigned int quirks;    /* Deviations from spec. */

/* Controller doesn't honor resets unless we touch the clock register */
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET                  (1<<0)
/* Controller has bad caps bits, but really supports DMA */
#define SDHCI_QUIRK_FORCE_DMA                           (1<<1)
/* Controller doesn't like to be reset when there is no card inserted. */
#define SDHCI_QUIRK_NO_CARD_NO_RESET                    (1<<2)
/* Controller doesn't like clearing the power reg before a change */
#define SDHCI_QUIRK_SINGLE_POWER_WRITE                  (1<<3)
/* Controller has flaky internal state so reset it on each ios change */
#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS               (1<<4)
/* Controller has an unusable DMA engine */
#define SDHCI_QUIRK_BROKEN_DMA                          (1<<5)
/* Controller has an unusable ADMA engine */
#define SDHCI_QUIRK_BROKEN_ADMA                         (1<<6)
/* Controller can only DMA from 32-bit aligned addresses */
#define SDHCI_QUIRK_32BIT_DMA_ADDR                      (1<<7)
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
#define SDHCI_QUIRK_32BIT_DMA_SIZE                      (1<<8)
/* Controller can only ADMA chunks that are a multiple of 32 bits */
#define SDHCI_QUIRK_32BIT_ADMA_SIZE                     (1<<9)
/* Controller needs to be reset after each request to stay stable */
#define SDHCI_QUIRK_RESET_AFTER_REQUEST                 (1<<10)
/* Controller needs voltage and power writes to happen separately */
#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER             (1<<11)
/* Controller provides an incorrect timeout value for transfers */
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL                  (1<<12)
/* Controller has an issue with buffer bits for small transfers */
#define SDHCI_QUIRK_BROKEN_SMALL_PIO                    (1<<13)
/* Controller does not provide transfer-complete interrupt when not busy */
#define SDHCI_QUIRK_NO_BUSY_IRQ                         (1<<14)
/* Controller has unreliable card detection */
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION               (1<<15)
/* Controller reports inverted write-protect state */
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT              (1<<16)
/* Controller has unusable command queue engine */
#define SDHCI_QUIRK_BROKEN_CQE                          (1<<17)
/* Controller does not like fast PIO transfers */
#define SDHCI_QUIRK_PIO_NEEDS_DELAY                     (1<<18)
/* Controller has to be forced to use block size of 2048 bytes */
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048                   (1<<20)
/* Controller cannot do multi-block transfers */
#define SDHCI_QUIRK_NO_MULTIBLOCK                       (1<<21)
/* Controller can only handle 1-bit data transfers */
#define SDHCI_QUIRK_FORCE_1_BIT_DATA                    (1<<22)
/* Controller needs 10ms delay between applying power and clock */
#define SDHCI_QUIRK_DELAY_AFTER_POWER                   (1<<23)
/* Controller uses SDCLK instead of TMCLK for data timeouts */
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK             (1<<24)
/* Controller reports wrong base clock capability */
#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN               (1<<25)
/* Controller cannot support End Attribute in NOP ADMA descriptor */
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC               (1<<26)
/* Controller is missing device caps. Use caps provided by host */
#define SDHCI_QUIRK_MISSING_CAPS                        (1<<27)
/* Controller uses Auto CMD12 command to stop the transfer */
#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12              (1<<28)
/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
#define SDHCI_QUIRK_NO_HISPD_BIT                        (1<<29)
/* Controller treats ADMA descriptors with length 0000h incorrectly */
#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC            (1<<30)
/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
#define SDHCI_QUIRK_UNSTABLE_RO_DETECT                  (1<<31)

        unsigned int quirks2;   /* More deviations from spec. */

#define SDHCI_QUIRK2_HOST_OFF_CARD_ON                   (1<<0)
#define SDHCI_QUIRK2_HOST_NO_CMD23                      (1<<1)
/* The system physically doesn't support 1.8v, even if the host does */
#define SDHCI_QUIRK2_NO_1_8_V                           (1<<2)
#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN                (1<<3)
#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON               (1<<4)
/* Controller has a non-standard host control register */
#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL                (1<<5)
/* Controller does not support HS200 */
#define SDHCI_QUIRK2_BROKEN_HS200                       (1<<6)
/* Controller does not support DDR50 */
#define SDHCI_QUIRK2_BROKEN_DDR50                       (1<<7)
/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
#define SDHCI_QUIRK2_STOP_WITH_TC                       (1<<8)
/* Controller does not support 64-bit DMA */
#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA                  (1<<9)
/* need clear transfer mode register before send cmd */
#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD  (1<<10)
/* Capability register bit-63 indicates HS400 support */
#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400               (1<<11)
/* forced tuned clock */
#define SDHCI_QUIRK2_TUNING_WORK_AROUND                 (1<<12)
/* disable the block count for single block transactions */
#define SDHCI_QUIRK2_SUPPORT_SINGLE                     (1<<13)
/* Controller broken with using ACMD23 */
#define SDHCI_QUIRK2_ACMD23_BROKEN                      (1<<14)
/* Broken Clock divider zero in controller */
#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN              (1<<15)
/* Controller has CRC in 136 bit Command Response */
#define SDHCI_QUIRK2_RSP_136_HAS_CRC                    (1<<16)

        int irq;                /* Device IRQ */
        void __iomem *ioaddr;   /* Mapped address */
        char *bounce_buffer;    /* For packing SDMA reads/writes */
        dma_addr_t bounce_addr;
        unsigned int bounce_buffer_size;

        const struct sdhci_ops *ops;    /* Low level hw interface */

        /* Internal data */
        struct mmc_host *mmc;   /* MMC structure */
        struct mmc_host_ops mmc_host_ops;       /* MMC host ops */
        u64 dma_mask;           /* custom DMA mask */

#if IS_ENABLED(CONFIG_LEDS_CLASS)
        struct led_classdev led;        /* LED control */
        char led_name[32];
#endif

        spinlock_t lock;        /* Mutex */

        int flags;              /* Host attributes */
#define SDHCI_USE_SDMA          (1<<0)  /* Host is SDMA capable */
#define SDHCI_USE_ADMA          (1<<1)  /* Host is ADMA capable */
#define SDHCI_REQ_USE_DMA       (1<<2)  /* Use DMA for this req. */
#define SDHCI_DEVICE_DEAD       (1<<3)  /* Device unresponsive */
#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
#define SDHCI_AUTO_CMD12        (1<<6)  /* Auto CMD12 support */
#define SDHCI_AUTO_CMD23        (1<<7)  /* Auto CMD23 support */
#define SDHCI_PV_ENABLED        (1<<8)  /* Preset value enabled */
#define SDHCI_SDIO_IRQ_ENABLED  (1<<9)  /* SDIO irq enabled */
#define SDHCI_USE_64_BIT_DMA    (1<<12) /* Use 64-bit DMA */
#define SDHCI_HS400_TUNING      (1<<13) /* Tuning for HS400 */
#define SDHCI_SIGNALING_330     (1<<14) /* Host is capable of 3.3V signaling */
#define SDHCI_SIGNALING_180     (1<<15) /* Host is capable of 1.8V signaling */
#define SDHCI_SIGNALING_120     (1<<16) /* Host is capable of 1.2V signaling */

        unsigned int version;   /* SDHCI spec. version */

        unsigned int max_clk;   /* Max possible freq (MHz) */
        unsigned int timeout_clk;       /* Timeout freq (KHz) */
        unsigned int clk_mul;   /* Clock Muliplier value */

        unsigned int clock;     /* Current clock (MHz) */
        u8 pwr;                 /* Current voltage */

        bool runtime_suspended; /* Host is runtime suspended */
        bool bus_on;            /* Bus power prevents runtime suspend */
        bool preset_enabled;    /* Preset is enabled */
        bool pending_reset;     /* Cmd/data reset is pending */

        struct mmc_request *mrqs_done[SDHCI_MAX_MRQS];  /* Requests done */
        struct mmc_command *cmd;        /* Current command */
        struct mmc_command *data_cmd;   /* Current data command */
        struct mmc_data *data;  /* Current data request */
        unsigned int data_early:1;      /* Data finished before cmd */

        struct sg_mapping_iter sg_miter;        /* SG state for PIO */
        unsigned int blocks;    /* remaining PIO blocks */

        int sg_count;           /* Mapped sg entries */

        void *adma_table;       /* ADMA descriptor table */
        void *align_buffer;     /* Bounce buffer */

        size_t adma_table_sz;   /* ADMA descriptor table size */
        size_t align_buffer_sz; /* Bounce buffer size */

        dma_addr_t adma_addr;   /* Mapped ADMA descr. table */
        dma_addr_t align_addr;  /* Mapped bounce buffer */

        unsigned int desc_sz;   /* ADMA descriptor size */

        struct tasklet_struct finish_tasklet;   /* Tasklet structures */

        struct timer_list timer;        /* Timer for timeouts */
        struct timer_list data_timer;   /* Timer for data timeouts */

        u32 caps;               /* CAPABILITY_0 */
        u32 caps1;              /* CAPABILITY_1 */
        bool read_caps;         /* Capability flags have been read */

        unsigned int            ocr_avail_sdio; /* OCR bit masks */
        unsigned int            ocr_avail_sd;
        unsigned int            ocr_avail_mmc;
        u32 ocr_mask;           /* available voltages */

        unsigned                timing;         /* Current timing */

        u32                     thread_isr;

        /* cached registers */
        u32                     ier;

        bool                    cqe_on;         /* CQE is operating */
        u32                     cqe_ier;        /* CQE interrupt mask */
        u32                     cqe_err_ier;    /* CQE error interrupt mask */

        wait_queue_head_t       buf_ready_int;  /* Waitqueue for Buffer Read Ready interrupt */
        unsigned int            tuning_done;    /* Condition flag set when CMD19 succeeds */

        unsigned int            tuning_count;   /* Timer count for re-tuning */
        unsigned int            tuning_mode;    /* Re-tuning mode supported by host */
#define SDHCI_TUNING_MODE_1     0
#define SDHCI_TUNING_MODE_2     1
#define SDHCI_TUNING_MODE_3     2
        /* Delay (ms) between tuning commands */
        int                     tuning_delay;

        /* Host SDMA buffer boundary. */
        u32                     sdma_boundary;

        unsigned long private[0] ____cacheline_aligned;
};

struct sdhci_ops {
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
        u32             (*read_l)(struct sdhci_host *host, int reg);
        u16             (*read_w)(struct sdhci_host *host, int reg);
        u8              (*read_b)(struct sdhci_host *host, int reg);
        void            (*write_l)(struct sdhci_host *host, u32 val, int reg);
        void            (*write_w)(struct sdhci_host *host, u16 val, int reg);
        void            (*write_b)(struct sdhci_host *host, u8 val, int reg);
#endif

        void    (*set_clock)(struct sdhci_host *host, unsigned int clock);
        void    (*set_power)(struct sdhci_host *host, unsigned char mode,
                             unsigned short vdd);

        u32             (*irq)(struct sdhci_host *host, u32 intmask);

        int             (*enable_dma)(struct sdhci_host *host);
        unsigned int    (*get_max_clock)(struct sdhci_host *host);
        unsigned int    (*get_min_clock)(struct sdhci_host *host);
        /* get_timeout_clock should return clk rate in unit of Hz */
        unsigned int    (*get_timeout_clock)(struct sdhci_host *host);
        unsigned int    (*get_max_timeout_count)(struct sdhci_host *host);
        void            (*set_timeout)(struct sdhci_host *host,
                                       struct mmc_command *cmd);
        void            (*set_bus_width)(struct sdhci_host *host, int width);
        void (*platform_send_init_74_clocks)(struct sdhci_host *host,
                                             u8 power_mode);
        unsigned int    (*get_ro)(struct sdhci_host *host);
        void            (*reset)(struct sdhci_host *host, u8 mask);
        int     (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
        void    (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
        void    (*hw_reset)(struct sdhci_host *host);
        void    (*adma_workaround)(struct sdhci_host *host, u32 intmask);
        void    (*card_event)(struct sdhci_host *host);
        void    (*voltage_switch)(struct sdhci_host *host);
};

#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS

static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
        if (unlikely(host->ops->write_l))
                host->ops->write_l(host, val, reg);
        else
                writel(val, host->ioaddr + reg);
}

static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
        if (unlikely(host->ops->write_w))
                host->ops->write_w(host, val, reg);
        else
                writew(val, host->ioaddr + reg);
}

static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
        if (unlikely(host->ops->write_b))
                host->ops->write_b(host, val, reg);
        else
                writeb(val, host->ioaddr + reg);
}

static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
{
        if (unlikely(host->ops->read_l))
                return host->ops->read_l(host, reg);
        else
                return readl(host->ioaddr + reg);
}

static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
{
        if (unlikely(host->ops->read_w))
                return host->ops->read_w(host, reg);
        else
                return readw(host->ioaddr + reg);
}

static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
{
        if (unlikely(host->ops->read_b))
                return host->ops->read_b(host, reg);
        else
                return readb(host->ioaddr + reg);
}

#else

static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
        writel(val, host->ioaddr + reg);
}

static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
        writew(val, host->ioaddr + reg);
}

static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
        writeb(val, host->ioaddr + reg);
}

static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
{
        return readl(host->ioaddr + reg);
}

static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
{
        return readw(host->ioaddr + reg);
}

static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
{
        return readb(host->ioaddr + reg);
}

#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */

struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size);
void sdhci_free_host(struct sdhci_host *host);

static inline void *sdhci_priv(struct sdhci_host *host)
{
        return host->private;
}

void sdhci_card_detect(struct sdhci_host *host);
void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps,
                       u32 *caps1);
int sdhci_setup_host(struct sdhci_host *host);
void sdhci_cleanup_host(struct sdhci_host *host);
int __sdhci_add_host(struct sdhci_host *host);
int sdhci_add_host(struct sdhci_host *host);
void sdhci_remove_host(struct sdhci_host *host, int dead);
void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);

static inline void sdhci_read_caps(struct sdhci_host *host)
{
        __sdhci_read_caps(host, NULL, NULL, NULL);
}

static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host)
{
        return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED);
}

u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
                   unsigned int *actual_clock);
void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
                     unsigned short vdd);
void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
                           unsigned short vdd);
void sdhci_set_bus_width(struct sdhci_host *host, int width);
void sdhci_reset(struct sdhci_host *host, u8 mask);
void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
                                      struct mmc_ios *ios);
void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);

#ifdef CONFIG_PM
int sdhci_suspend_host(struct sdhci_host *host);
int sdhci_resume_host(struct sdhci_host *host);
void sdhci_enable_irq_wakeups(struct sdhci_host *host);
int sdhci_runtime_suspend_host(struct sdhci_host *host);
int sdhci_runtime_resume_host(struct sdhci_host *host);
#endif

void sdhci_cqe_enable(struct mmc_host *mmc);
void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery);
bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
                   int *data_error);

void sdhci_dumpregs(struct sdhci_host *host);

#endif /* __SDHCI_HW_H */