drivers/mtd/devices/doc2001.c

   1
   2 /*
   3  * Linux driver for Disk-On-Chip Millennium
   4  * (c) 1999 Machine Vision Holdings, Inc.
   5  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
   6  */
   7
   8 #include <linux/kernel.h>
   9 #include <linux/module.h>
  10 #include <asm/errno.h>
  11 #include <asm/io.h>
  12 #include <asm/uaccess.h>
  13 #include <linux/delay.h>
  14 #include <linux/slab.h>
  15 #include <linux/init.h>
  16 #include <linux/types.h>
  17 #include <linux/bitops.h>
  18
  19 #include <linux/mtd/mtd.h>
  20 #include <linux/mtd/nand.h>
  21 #include <linux/mtd/doc2000.h>
  22
  23 /* #define ECC_DEBUG */
  24
  25 /* I have no idea why some DoC chips can not use memcop_form|to_io().
  26  * This may be due to the different revisions of the ASIC controller built-in or
  27  * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
  28  * this:*/
  29 #undef USE_MEMCPY
  30
  31 static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
  32                     size_t *retlen, u_char *buf);
  33 static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
  34                      size_t *retlen, const u_char *buf);
  35 static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
  36                         struct mtd_oob_ops *ops);
  37 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
  38                          struct mtd_oob_ops *ops);
  39 static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
  40
  41 static struct mtd_info *docmillist = NULL;
  42
  43 /* Perform the required delay cycles by reading from the NOP register */
  44 static void DoC_Delay(void __iomem * docptr, unsigned short cycles)
  45 {
  46         volatile char dummy;
  47         int i;
  48
  49         for (i = 0; i < cycles; i++)
  50                 dummy = ReadDOC(docptr, NOP);
  51 }
  52
  53 /* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
  54 static int _DoC_WaitReady(void __iomem * docptr)
  55 {
  56         unsigned short c = 0xffff;
  57
  58         pr_debug("_DoC_WaitReady called for out-of-line wait\n");
  59
  60         /* Out-of-line routine to wait for chip response */
  61         while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c)
  62                 ;
  63
  64         if (c == 0)
  65                 pr_debug("_DoC_WaitReady timed out.\n");
  66
  67         return (c == 0);
  68 }
  69
  70 static inline int DoC_WaitReady(void __iomem * docptr)
  71 {
  72         /* This is inline, to optimise the common case, where it's ready instantly */
  73         int ret = 0;
  74
  75         /* 4 read form NOP register should be issued in prior to the read from CDSNControl
  76            see Software Requirement 11.4 item 2. */
  77         DoC_Delay(docptr, 4);
  78
  79         if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
  80                 /* Call the out-of-line routine to wait */
  81                 ret = _DoC_WaitReady(docptr);
  82
  83         /* issue 2 read from NOP register after reading from CDSNControl register
  84            see Software Requirement 11.4 item 2. */
  85         DoC_Delay(docptr, 2);
  86
  87         return ret;
  88 }
  89
  90 /* DoC_Command: Send a flash command to the flash chip through the CDSN IO register
  91    with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
  92    required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
  93
  94 static void DoC_Command(void __iomem * docptr, unsigned char command,
  95                                unsigned char xtraflags)
  96 {
  97         /* Assert the CLE (Command Latch Enable) line to the flash chip */
  98         WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl);
  99         DoC_Delay(docptr, 4);
 100
 101         /* Send the command */
 102         WriteDOC(command, docptr, Mil_CDSN_IO);
 103         WriteDOC(0x00, docptr, WritePipeTerm);
 104
 105         /* Lower the CLE line */
 106         WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl);
 107         DoC_Delay(docptr, 4);
 108 }
 109
 110 /* DoC_Address: Set the current address for the flash chip through the CDSN IO register
 111    with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
 112    required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
 113
 114 static inline void DoC_Address(void __iomem * docptr, int numbytes, unsigned long ofs,
 115                                unsigned char xtraflags1, unsigned char xtraflags2)
 116 {
 117         /* Assert the ALE (Address Latch Enable) line to the flash chip */
 118         WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl);
 119         DoC_Delay(docptr, 4);
 120
 121         /* Send the address */
 122         switch (numbytes)
 123             {
 124             case 1:
 125                     /* Send single byte, bits 0-7. */
 126                     WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
 127                     WriteDOC(0x00, docptr, WritePipeTerm);
 128                     break;
 129             case 2:
 130                     /* Send bits 9-16 followed by 17-23 */
 131                     WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
 132                     WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
 133                     WriteDOC(0x00, docptr, WritePipeTerm);
 134                 break;
 135             case 3:
 136                     /* Send 0-7, 9-16, then 17-23 */
 137                     WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
 138                     WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
 139                     WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
 140                     WriteDOC(0x00, docptr, WritePipeTerm);
 141                 break;
 142             default:
 143                 return;
 144             }
 145
 146         /* Lower the ALE line */
 147         WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, CDSNControl);
 148         DoC_Delay(docptr, 4);
 149 }
 150
 151 /* DoC_SelectChip: Select a given flash chip within the current floor */
 152 static int DoC_SelectChip(void __iomem * docptr, int chip)
 153 {
 154         /* Select the individual flash chip requested */
 155         WriteDOC(chip, docptr, CDSNDeviceSelect);
 156         DoC_Delay(docptr, 4);
 157
 158         /* Wait for it to be ready */
 159         return DoC_WaitReady(docptr);
 160 }
 161
 162 /* DoC_SelectFloor: Select a given floor (bank of flash chips) */
 163 static int DoC_SelectFloor(void __iomem * docptr, int floor)
 164 {
 165         /* Select the floor (bank) of chips required */
 166         WriteDOC(floor, docptr, FloorSelect);
 167
 168         /* Wait for the chip to be ready */
 169         return DoC_WaitReady(docptr);
 170 }
 171
 172 /* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
 173 static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
 174 {
 175         int mfr, id, i, j;
 176         volatile char dummy;
 177
 178         /* Page in the required floor/chip
 179            FIXME: is this supported by Millennium ?? */
 180         DoC_SelectFloor(doc->virtadr, floor);
 181         DoC_SelectChip(doc->virtadr, chip);
 182
 183         /* Reset the chip, see Software Requirement 11.4 item 1. */
 184         DoC_Command(doc->virtadr, NAND_CMD_RESET, CDSN_CTRL_WP);
 185         DoC_WaitReady(doc->virtadr);
 186
 187         /* Read the NAND chip ID: 1. Send ReadID command */
 188         DoC_Command(doc->virtadr, NAND_CMD_READID, CDSN_CTRL_WP);
 189
 190         /* Read the NAND chip ID: 2. Send address byte zero */
 191         DoC_Address(doc->virtadr, 1, 0x00, CDSN_CTRL_WP, 0x00);
 192
 193         /* Read the manufacturer and device id codes of the flash device through
 194            CDSN IO register see Software Requirement 11.4 item 5.*/
 195         dummy = ReadDOC(doc->virtadr, ReadPipeInit);
 196         DoC_Delay(doc->virtadr, 2);
 197         mfr = ReadDOC(doc->virtadr, Mil_CDSN_IO);
 198
 199         DoC_Delay(doc->virtadr, 2);
 200         id  = ReadDOC(doc->virtadr, Mil_CDSN_IO);
 201         dummy = ReadDOC(doc->virtadr, LastDataRead);
 202
 203         /* No response - return failure */
 204         if (mfr == 0xff || mfr == 0)
 205                 return 0;
 206
 207         /* FIXME: to deal with multi-flash on multi-Millennium case more carefully */
 208         for (i = 0; nand_flash_ids[i].name != NULL; i++) {
 209                 if ( id == nand_flash_ids[i].id) {
 210                         /* Try to identify manufacturer */
 211                         for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
 212                                 if (nand_manuf_ids[j].id == mfr)
 213                                         break;
 214                         }
 215                         printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, "
 216                                "Chip ID: %2.2X (%s:%s)\n",
 217                                mfr, id, nand_manuf_ids[j].name, nand_flash_ids[i].name);
 218                         doc->mfr = mfr;
 219                         doc->id = id;
 220                         doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1;
 221                         break;
 222                 }
 223         }
 224
 225         if (nand_flash_ids[i].name == NULL)
 226                 return 0;
 227         else
 228                 return 1;
 229 }
 230
 231 /* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
 232 static void DoC_ScanChips(struct DiskOnChip *this)
 233 {
 234         int floor, chip;
 235         int numchips[MAX_FLOORS_MIL];
 236         int ret;
 237
 238         this->numchips = 0;
 239         this->mfr = 0;
 240         this->id = 0;
 241
 242         /* For each floor, find the number of valid chips it contains */
 243         for (floor = 0,ret = 1; floor < MAX_FLOORS_MIL; floor++) {
 244                 numchips[floor] = 0;
 245                 for (chip = 0; chip < MAX_CHIPS_MIL && ret != 0; chip++) {
 246                         ret = DoC_IdentChip(this, floor, chip);
 247                         if (ret) {
 248                                 numchips[floor]++;
 249                                 this->numchips++;
 250                         }
 251                 }
 252         }
 253         /* If there are none at all that we recognise, bail */
 254         if (!this->numchips) {
 255                 printk("No flash chips recognised.\n");
 256                 return;
 257         }
 258
 259         /* Allocate an array to hold the information for each chip */
 260         this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
 261         if (!this->chips){
 262                 printk("No memory for allocating chip info structures\n");
 263                 return;
 264         }
 265
 266         /* Fill out the chip array with {floor, chipno} for each
 267          * detected chip in the device. */
 268         for (floor = 0, ret = 0; floor < MAX_FLOORS_MIL; floor++) {
 269                 for (chip = 0 ; chip < numchips[floor] ; chip++) {
 270                         this->chips[ret].floor = floor;
 271                         this->chips[ret].chip = chip;
 272                         this->chips[ret].curadr = 0;
 273                         this->chips[ret].curmode = 0x50;
 274                         ret++;
 275                 }
 276         }
 277
 278         /* Calculate and print the total size of the device */
 279         this->totlen = this->numchips * (1 << this->chipshift);
 280         printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
 281                this->numchips ,this->totlen >> 20);
 282 }
 283
 284 static int DoCMil_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
 285 {
 286         int tmp1, tmp2, retval;
 287
 288         if (doc1->physadr == doc2->physadr)
 289                 return 1;
 290
 291         /* Use the alias resolution register which was set aside for this
 292          * purpose. If it's value is the same on both chips, they might
 293          * be the same chip, and we write to one and check for a change in
 294          * the other. It's unclear if this register is usuable in the
 295          * DoC 2000 (it's in the Millenium docs), but it seems to work. */
 296         tmp1 = ReadDOC(doc1->virtadr, AliasResolution);
 297         tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
 298         if (tmp1 != tmp2)
 299                 return 0;
 300
 301         WriteDOC((tmp1+1) % 0xff, doc1->virtadr, AliasResolution);
 302         tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
 303         if (tmp2 == (tmp1+1) % 0xff)
 304                 retval = 1;
 305         else
 306                 retval = 0;
 307
 308         /* Restore register contents.  May not be necessary, but do it just to
 309          * be safe. */
 310         WriteDOC(tmp1, doc1->virtadr, AliasResolution);
 311
 312         return retval;
 313 }
 314
 315 /* This routine is found from the docprobe code by symbol_get(),
 316  * which will bump the use count of this module. */
 317 void DoCMil_init(struct mtd_info *mtd)
 318 {
 319         struct DiskOnChip *this = mtd->priv;
 320         struct DiskOnChip *old = NULL;
 321
 322         /* We must avoid being called twice for the same device. */
 323         if (docmillist)
 324                 old = docmillist->priv;
 325
 326         while (old) {
 327                 if (DoCMil_is_alias(this, old)) {
 328                         printk(KERN_NOTICE "Ignoring DiskOnChip Millennium at "
 329                                "0x%lX - already configured\n", this->physadr);
 330                         iounmap(this->virtadr);
 331                         kfree(mtd);
 332                         return;
 333                 }
 334                 if (old->nextdoc)
 335                         old = old->nextdoc->priv;
 336                 else
 337                         old = NULL;
 338         }
 339
 340         mtd->name = "DiskOnChip Millennium";
 341         printk(KERN_NOTICE "DiskOnChip Millennium found at address 0x%lX\n",
 342                this->physadr);
 343
 344         mtd->type = MTD_NANDFLASH;
 345         mtd->flags = MTD_CAP_NANDFLASH;
 346
 347         /* FIXME: erase size is not always 8KiB */
 348         mtd->erasesize = 0x2000;
 349         mtd->writebufsize = mtd->writesize = 512;
 350         mtd->oobsize = 16;
 351         mtd->owner = THIS_MODULE;
 352         mtd->_erase = doc_erase;
 353         mtd->_read = doc_read;
 354         mtd->_write = doc_write;
 355         mtd->_read_oob = doc_read_oob;
 356         mtd->_write_oob = doc_write_oob;
 357         this->curfloor = -1;
 358         this->curchip = -1;
 359
 360         /* Ident all the chips present. */
 361         DoC_ScanChips(this);
 362
 363         if (!this->totlen) {
 364                 kfree(mtd);
 365                 iounmap(this->virtadr);
 366         } else {
 367                 this->nextdoc = docmillist;
 368                 docmillist = mtd;
 369                 mtd->size  = this->totlen;
 370                 mtd_device_register(mtd, NULL, 0);
 371                 return;
 372         }
 373 }
 374 EXPORT_SYMBOL_GPL(DoCMil_init);
 375
 376 static int doc_read (struct mtd_info *mtd, loff_t from, size_t len,
 377                      size_t *retlen, u_char *buf)
 378 {
 379         int i, ret;
 380         volatile char dummy;
 381         unsigned char syndrome[6], eccbuf[6];
 382         struct DiskOnChip *this = mtd->priv;
 383         void __iomem *docptr = this->virtadr;
 384         struct Nand *mychip = &this->chips[from >> (this->chipshift)];
 385
 386         /* Don't allow a single read to cross a 512-byte block boundary */
 387         if (from + len > ((from | 0x1ff) + 1))
 388                 len = ((from | 0x1ff) + 1) - from;
 389
 390         /* Find the chip which is to be used and select it */
 391         if (this->curfloor != mychip->floor) {
 392                 DoC_SelectFloor(docptr, mychip->floor);
 393                 DoC_SelectChip(docptr, mychip->chip);
 394         } else if (this->curchip != mychip->chip) {
 395                 DoC_SelectChip(docptr, mychip->chip);
 396         }
 397         this->curfloor = mychip->floor;
 398         this->curchip = mychip->chip;
 399
 400         /* issue the Read0 or Read1 command depend on which half of the page
 401            we are accessing. Polling the Flash Ready bit after issue 3 bytes
 402            address in Sequence Read Mode, see Software Requirement 11.4 item 1.*/
 403         DoC_Command(docptr, (from >> 8) & 1, CDSN_CTRL_WP);
 404         DoC_Address(docptr, 3, from, CDSN_CTRL_WP, 0x00);
 405         DoC_WaitReady(docptr);
 406
 407         /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
 408         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 409         WriteDOC (DOC_ECC_EN, docptr, ECCConf);
 410
 411         /* Read the data via the internal pipeline through CDSN IO register,
 412            see Pipelined Read Operations 11.3 */
 413         dummy = ReadDOC(docptr, ReadPipeInit);
 414 #ifndef USE_MEMCPY
 415         for (i = 0; i < len-1; i++) {
 416                 /* N.B. you have to increase the source address in this way or the
 417                    ECC logic will not work properly */
 418                 buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
 419         }
 420 #else
 421         memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
 422 #endif
 423         buf[len - 1] = ReadDOC(docptr, LastDataRead);
 424
 425         /* Let the caller know we completed it */
 426         *retlen = len;
 427         ret = 0;
 428
 429         /* Read the ECC data from Spare Data Area,
 430            see Reed-Solomon EDC/ECC 11.1 */
 431         dummy = ReadDOC(docptr, ReadPipeInit);
 432 #ifndef USE_MEMCPY
 433         for (i = 0; i < 5; i++) {
 434                 /* N.B. you have to increase the source address in this way or the
 435                    ECC logic will not work properly */
 436                 eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
 437         }
 438 #else
 439         memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5);
 440 #endif
 441         eccbuf[5] = ReadDOC(docptr, LastDataRead);
 442
 443         /* Flush the pipeline */
 444         dummy = ReadDOC(docptr, ECCConf);
 445         dummy = ReadDOC(docptr, ECCConf);
 446
 447         /* Check the ECC Status */
 448         if (ReadDOC(docptr, ECCConf) & 0x80) {
 449                 int nb_errors;
 450                 /* There was an ECC error */
 451 #ifdef ECC_DEBUG
 452                 printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
 453 #endif
 454                 /* Read the ECC syndrome through the DiskOnChip ECC logic.
 455                    These syndrome will be all ZERO when there is no error */
 456                 for (i = 0; i < 6; i++) {
 457                         syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
 458                 }
 459                 nb_errors = doc_decode_ecc(buf, syndrome);
 460 #ifdef ECC_DEBUG
 461                 printk("ECC Errors corrected: %x\n", nb_errors);
 462 #endif
 463                 if (nb_errors < 0) {
 464                         /* We return error, but have actually done the read. Not that
 465                            this can be told to user-space, via sys_read(), but at least
 466                            MTD-aware stuff can know about it by checking *retlen */
 467                         ret = -EIO;
 468                 }
 469         }
 470
 471 #ifdef PSYCHO_DEBUG
 472         printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
 473                (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
 474                eccbuf[4], eccbuf[5]);
 475 #endif
 476
 477         /* disable the ECC engine */
 478         WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
 479
 480         return ret;
 481 }
 482
 483 static int doc_write (struct mtd_info *mtd, loff_t to, size_t len,
 484                       size_t *retlen, const u_char *buf)
 485 {
 486         int i,ret = 0;
 487         char eccbuf[6];
 488         volatile char dummy;
 489         struct DiskOnChip *this = mtd->priv;
 490         void __iomem *docptr = this->virtadr;
 491         struct Nand *mychip = &this->chips[to >> (this->chipshift)];
 492
 493 #if 0
 494         /* Don't allow a single write to cross a 512-byte block boundary */
 495         if (to + len > ( (to | 0x1ff) + 1))
 496                 len = ((to | 0x1ff) + 1) - to;
 497 #else
 498         /* Don't allow writes which aren't exactly one block */
 499         if (to & 0x1ff || len != 0x200)
 500                 return -EINVAL;
 501 #endif
 502
 503         /* Find the chip which is to be used and select it */
 504         if (this->curfloor != mychip->floor) {
 505                 DoC_SelectFloor(docptr, mychip->floor);
 506                 DoC_SelectChip(docptr, mychip->chip);
 507         } else if (this->curchip != mychip->chip) {
 508                 DoC_SelectChip(docptr, mychip->chip);
 509         }
 510         this->curfloor = mychip->floor;
 511         this->curchip = mychip->chip;
 512
 513         /* Reset the chip, see Software Requirement 11.4 item 1. */
 514         DoC_Command(docptr, NAND_CMD_RESET, 0x00);
 515         DoC_WaitReady(docptr);
 516         /* Set device to main plane of flash */
 517         DoC_Command(docptr, NAND_CMD_READ0, 0x00);
 518
 519         /* issue the Serial Data In command to initial the Page Program process */
 520         DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
 521         DoC_Address(docptr, 3, to, 0x00, 0x00);
 522         DoC_WaitReady(docptr);
 523
 524         /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
 525         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 526         WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
 527
 528         /* Write the data via the internal pipeline through CDSN IO register,
 529            see Pipelined Write Operations 11.2 */
 530 #ifndef USE_MEMCPY
 531         for (i = 0; i < len; i++) {
 532                 /* N.B. you have to increase the source address in this way or the
 533                    ECC logic will not work properly */
 534                 WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
 535         }
 536 #else
 537         memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
 538 #endif
 539         WriteDOC(0x00, docptr, WritePipeTerm);
 540
 541         /* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic
 542            see Reed-Solomon EDC/ECC 11.1 */
 543         WriteDOC(0, docptr, NOP);
 544         WriteDOC(0, docptr, NOP);
 545         WriteDOC(0, docptr, NOP);
 546
 547         /* Read the ECC data through the DiskOnChip ECC logic */
 548         for (i = 0; i < 6; i++) {
 549                 eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i);
 550         }
 551
 552         /* ignore the ECC engine */
 553         WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
 554
 555 #ifndef USE_MEMCPY
 556         /* Write the ECC data to flash */
 557         for (i = 0; i < 6; i++) {
 558                 /* N.B. you have to increase the source address in this way or the
 559                    ECC logic will not work properly */
 560                 WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i);
 561         }
 562 #else
 563         memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6);
 564 #endif
 565
 566         /* write the block status BLOCK_USED (0x5555) at the end of ECC data
 567            FIXME: this is only a hack for programming the IPL area for LinuxBIOS
 568            and should be replace with proper codes in user space utilities */
 569         WriteDOC(0x55, docptr, Mil_CDSN_IO);
 570         WriteDOC(0x55, docptr, Mil_CDSN_IO + 1);
 571
 572         WriteDOC(0x00, docptr, WritePipeTerm);
 573
 574 #ifdef PSYCHO_DEBUG
 575         printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
 576                (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
 577                eccbuf[4], eccbuf[5]);
 578 #endif
 579
 580         /* Commit the Page Program command and wait for ready
 581            see Software Requirement 11.4 item 1.*/
 582         DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
 583         DoC_WaitReady(docptr);
 584
 585         /* Read the status of the flash device through CDSN IO register
 586            see Software Requirement 11.4 item 5.*/
 587         DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
 588         dummy = ReadDOC(docptr, ReadPipeInit);
 589         DoC_Delay(docptr, 2);
 590         if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
 591                 printk("Error programming flash\n");
 592                 /* Error in programming
 593                    FIXME: implement Bad Block Replacement (in nftl.c ??) */
 594                 *retlen = 0;
 595                 ret = -EIO;
 596         }
 597         dummy = ReadDOC(docptr, LastDataRead);
 598
 599         /* Let the caller know we completed it */
 600         *retlen = len;
 601
 602         return ret;
 603 }
 604
 605 static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
 606                         struct mtd_oob_ops *ops)
 607 {
 608 #ifndef USE_MEMCPY
 609         int i;
 610 #endif
 611         volatile char dummy;
 612         struct DiskOnChip *this = mtd->priv;
 613         void __iomem *docptr = this->virtadr;
 614         struct Nand *mychip = &this->chips[ofs >> this->chipshift];
 615         uint8_t *buf = ops->oobbuf;
 616         size_t len = ops->len;
 617
 618         BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
 619
 620         ofs += ops->ooboffs;
 621
 622         /* Find the chip which is to be used and select it */
 623         if (this->curfloor != mychip->floor) {
 624                 DoC_SelectFloor(docptr, mychip->floor);
 625                 DoC_SelectChip(docptr, mychip->chip);
 626         } else if (this->curchip != mychip->chip) {
 627                 DoC_SelectChip(docptr, mychip->chip);
 628         }
 629         this->curfloor = mychip->floor;
 630         this->curchip = mychip->chip;
 631
 632         /* disable the ECC engine */
 633         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 634         WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
 635
 636         /* issue the Read2 command to set the pointer to the Spare Data Area.
 637            Polling the Flash Ready bit after issue 3 bytes address in
 638            Sequence Read Mode, see Software Requirement 11.4 item 1.*/
 639         DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
 640         DoC_Address(docptr, 3, ofs, CDSN_CTRL_WP, 0x00);
 641         DoC_WaitReady(docptr);
 642
 643         /* Read the data out via the internal pipeline through CDSN IO register,
 644            see Pipelined Read Operations 11.3 */
 645         dummy = ReadDOC(docptr, ReadPipeInit);
 646 #ifndef USE_MEMCPY
 647         for (i = 0; i < len-1; i++) {
 648                 /* N.B. you have to increase the source address in this way or the
 649                    ECC logic will not work properly */
 650                 buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
 651         }
 652 #else
 653         memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
 654 #endif
 655         buf[len - 1] = ReadDOC(docptr, LastDataRead);
 656
 657         ops->retlen = len;
 658
 659         return 0;
 660 }
 661
 662 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
 663                          struct mtd_oob_ops *ops)
 664 {
 665 #ifndef USE_MEMCPY
 666         int i;
 667 #endif
 668         volatile char dummy;
 669         int ret = 0;
 670         struct DiskOnChip *this = mtd->priv;
 671         void __iomem *docptr = this->virtadr;
 672         struct Nand *mychip = &this->chips[ofs >> this->chipshift];
 673         uint8_t *buf = ops->oobbuf;
 674         size_t len = ops->len;
 675
 676         BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
 677
 678         ofs += ops->ooboffs;
 679
 680         /* Find the chip which is to be used and select it */
 681         if (this->curfloor != mychip->floor) {
 682                 DoC_SelectFloor(docptr, mychip->floor);
 683                 DoC_SelectChip(docptr, mychip->chip);
 684         } else if (this->curchip != mychip->chip) {
 685                 DoC_SelectChip(docptr, mychip->chip);
 686         }
 687         this->curfloor = mychip->floor;
 688         this->curchip = mychip->chip;
 689
 690         /* disable the ECC engine */
 691         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 692         WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
 693
 694         /* Reset the chip, see Software Requirement 11.4 item 1. */
 695         DoC_Command(docptr, NAND_CMD_RESET, CDSN_CTRL_WP);
 696         DoC_WaitReady(docptr);
 697         /* issue the Read2 command to set the pointer to the Spare Data Area. */
 698         DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
 699
 700         /* issue the Serial Data In command to initial the Page Program process */
 701         DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
 702         DoC_Address(docptr, 3, ofs, 0x00, 0x00);
 703
 704         /* Write the data via the internal pipeline through CDSN IO register,
 705            see Pipelined Write Operations 11.2 */
 706 #ifndef USE_MEMCPY
 707         for (i = 0; i < len; i++) {
 708                 /* N.B. you have to increase the source address in this way or the
 709                    ECC logic will not work properly */
 710                 WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
 711         }
 712 #else
 713         memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
 714 #endif
 715         WriteDOC(0x00, docptr, WritePipeTerm);
 716
 717         /* Commit the Page Program command and wait for ready
 718            see Software Requirement 11.4 item 1.*/
 719         DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
 720         DoC_WaitReady(docptr);
 721
 722         /* Read the status of the flash device through CDSN IO register
 723            see Software Requirement 11.4 item 5.*/
 724         DoC_Command(docptr, NAND_CMD_STATUS, 0x00);
 725         dummy = ReadDOC(docptr, ReadPipeInit);
 726         DoC_Delay(docptr, 2);
 727         if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
 728                 printk("Error programming oob data\n");
 729                 /* FIXME: implement Bad Block Replacement (in nftl.c ??) */
 730                 ops->retlen = 0;
 731                 ret = -EIO;
 732         }
 733         dummy = ReadDOC(docptr, LastDataRead);
 734
 735         ops->retlen = len;
 736
 737         return ret;
 738 }
 739
 740 int doc_erase (struct mtd_info *mtd, struct erase_info *instr)
 741 {
 742         volatile char dummy;
 743         struct DiskOnChip *this = mtd->priv;
 744         __u32 ofs = instr->addr;
 745         __u32 len = instr->len;
 746         void __iomem *docptr = this->virtadr;
 747         struct Nand *mychip = &this->chips[ofs >> this->chipshift];
 748
 749         if (len != mtd->erasesize)
 750                 printk(KERN_WARNING "Erase not right size (%x != %x)n",
 751                        len, mtd->erasesize);
 752
 753         /* Find the chip which is to be used and select it */
 754         if (this->curfloor != mychip->floor) {
 755                 DoC_SelectFloor(docptr, mychip->floor);
 756                 DoC_SelectChip(docptr, mychip->chip);
 757         } else if (this->curchip != mychip->chip) {
 758                 DoC_SelectChip(docptr, mychip->chip);
 759         }
 760         this->curfloor = mychip->floor;
 761         this->curchip = mychip->chip;
 762
 763         instr->state = MTD_ERASE_PENDING;
 764
 765         /* issue the Erase Setup command */
 766         DoC_Command(docptr, NAND_CMD_ERASE1, 0x00);
 767         DoC_Address(docptr, 2, ofs, 0x00, 0x00);
 768
 769         /* Commit the Erase Start command and wait for ready
 770            see Software Requirement 11.4 item 1.*/
 771         DoC_Command(docptr, NAND_CMD_ERASE2, 0x00);
 772         DoC_WaitReady(docptr);
 773
 774         instr->state = MTD_ERASING;
 775
 776         /* Read the status of the flash device through CDSN IO register
 777            see Software Requirement 11.4 item 5.
 778            FIXME: it seems that we are not wait long enough, some blocks are not
 779            erased fully */
 780         DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
 781         dummy = ReadDOC(docptr, ReadPipeInit);
 782         DoC_Delay(docptr, 2);
 783         if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
 784                 printk("Error Erasing at 0x%x\n", ofs);
 785                 /* There was an error
 786                    FIXME: implement Bad Block Replacement (in nftl.c ??) */
 787                 instr->state = MTD_ERASE_FAILED;
 788         } else
 789                 instr->state = MTD_ERASE_DONE;
 790         dummy = ReadDOC(docptr, LastDataRead);
 791
 792         mtd_erase_callback(instr);
 793
 794         return 0;
 795 }
 796
 797 /****************************************************************************
 798  *
 799  * Module stuff
 800  *
 801  ****************************************************************************/
 802
 803 static void __exit cleanup_doc2001(void)
 804 {
 805         struct mtd_info *mtd;
 806         struct DiskOnChip *this;
 807
 808         while ((mtd=docmillist)) {
 809                 this = mtd->priv;
 810                 docmillist = this->nextdoc;
 811
 812                 mtd_device_unregister(mtd);
 813
 814                 iounmap(this->virtadr);
 815                 kfree(this->chips);
 816                 kfree(mtd);
 817         }
 818 }
 819
 820 module_exit(cleanup_doc2001);
 821
 822 MODULE_LICENSE("GPL");
 823 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
 824 MODULE_DESCRIPTION("Alternative driver for DiskOnChip Millennium");