cfg80211: fix proto in ieee80211_data_to_8023 for frames without LLC header

[mirror_ubuntu-focal-kernel.git] / drivers / mtd / spi-nor / spi-nor.c

/*
 * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with
 * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c
 *
 * Copyright (C) 2005, Intec Automation Inc.
 * Copyright (C) 2014, Freescale Semiconductor, Inc.
 *
 * This code is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/err.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/math64.h>
#include <linux/sizes.h>

#include <linux/mtd/mtd.h>
#include <linux/of_platform.h>
#include <linux/spi/flash.h>
#include <linux/mtd/spi-nor.h>

/* Define max times to check status register before we give up. */

/*
 * For everything but full-chip erase; probably could be much smaller, but kept
 * around for safety for now
 */
#define DEFAULT_READY_WAIT_JIFFIES              (40UL * HZ)

/*
 * For full-chip erase, calibrated to a 2MB flash (M25P16); should be scaled up
 * for larger flash
 */
#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES       (40UL * HZ)

#define SPI_NOR_MAX_ID_LEN      6
#define SPI_NOR_MAX_ADDR_WIDTH  4

struct flash_info {
        char            *name;

        /*
         * This array stores the ID bytes.
         * The first three bytes are the JEDIC ID.
         * JEDEC ID zero means "no ID" (mostly older chips).
         */
        u8              id[SPI_NOR_MAX_ID_LEN];
        u8              id_len;

        /* The size listed here is what works with SPINOR_OP_SE, which isn't
         * necessarily called a "sector" by the vendor.
         */
        unsigned        sector_size;
        u16             n_sectors;

        u16             page_size;
        u16             addr_width;

        u16             flags;
#define SECT_4K                 BIT(0)  /* SPINOR_OP_BE_4K works uniformly */
#define SPI_NOR_NO_ERASE        BIT(1)  /* No erase command needed */
#define SST_WRITE               BIT(2)  /* use SST byte programming */
#define SPI_NOR_NO_FR           BIT(3)  /* Can't do fastread */
#define SECT_4K_PMC             BIT(4)  /* SPINOR_OP_BE_4K_PMC works uniformly */
#define SPI_NOR_DUAL_READ       BIT(5)  /* Flash supports Dual Read */
#define SPI_NOR_QUAD_READ       BIT(6)  /* Flash supports Quad Read */
#define USE_FSR                 BIT(7)  /* use flag status register */
#define SPI_NOR_HAS_LOCK        BIT(8)  /* Flash supports lock/unlock via SR */
#define SPI_NOR_HAS_TB          BIT(9)  /*
                                         * Flash SR has Top/Bottom (TB) protect
                                         * bit. Must be used with
                                         * SPI_NOR_HAS_LOCK.
                                         */
};

#define JEDEC_MFR(info) ((info)->id[0])

static const struct flash_info *spi_nor_match_id(const char *name);

/*
 * Read the status register, returning its value in the location
 * Return the status register value.
 * Returns negative if error occurred.
 */
static int read_sr(struct spi_nor *nor)
{
        int ret;
        u8 val;

        ret = nor->read_reg(nor, SPINOR_OP_RDSR, &val, 1);
        if (ret < 0) {
                pr_err("error %d reading SR\n", (int) ret);
                return ret;
        }

        return val;
}

/*
 * Read the flag status register, returning its value in the location
 * Return the status register value.
 * Returns negative if error occurred.
 */
static int read_fsr(struct spi_nor *nor)
{
        int ret;
        u8 val;

        ret = nor->read_reg(nor, SPINOR_OP_RDFSR, &val, 1);
        if (ret < 0) {
                pr_err("error %d reading FSR\n", ret);
                return ret;
        }

        return val;
}

/*
 * Read configuration register, returning its value in the
 * location. Return the configuration register value.
 * Returns negative if error occured.
 */
static int read_cr(struct spi_nor *nor)
{
        int ret;
        u8 val;

        ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1);
        if (ret < 0) {
                dev_err(nor->dev, "error %d reading CR\n", ret);
                return ret;
        }

        return val;
}

/*
 * Dummy Cycle calculation for different type of read.
 * It can be used to support more commands with
 * different dummy cycle requirements.
 */
static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor)
{
        switch (nor->flash_read) {
        case SPI_NOR_FAST:
        case SPI_NOR_DUAL:
        case SPI_NOR_QUAD:
                return 8;
        case SPI_NOR_NORMAL:
                return 0;
        }
        return 0;
}

/*
 * Write status register 1 byte
 * Returns negative if error occurred.
 */
static inline int write_sr(struct spi_nor *nor, u8 val)
{
        nor->cmd_buf[0] = val;
        return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1);
}

/*
 * Set write enable latch with Write Enable command.
 * Returns negative if error occurred.
 */
static inline int write_enable(struct spi_nor *nor)
{
        return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0);
}

/*
 * Send write disble instruction to the chip.
 */
static inline int write_disable(struct spi_nor *nor)
{
        return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0);
}

static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
{
        return mtd->priv;
}

/* Enable/disable 4-byte addressing mode. */
static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
                            int enable)
{
        int status;
        bool need_wren = false;
        u8 cmd;

        switch (JEDEC_MFR(info)) {
        case SNOR_MFR_MICRON:
                /* Some Micron need WREN command; all will accept it */
                need_wren = true;
        case SNOR_MFR_MACRONIX:
        case SNOR_MFR_WINBOND:
                if (need_wren)
                        write_enable(nor);

                cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
                status = nor->write_reg(nor, cmd, NULL, 0);
                if (need_wren)
                        write_disable(nor);

                return status;
        default:
                /* Spansion style */
                nor->cmd_buf[0] = enable << 7;
                return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1);
        }
}
static inline int spi_nor_sr_ready(struct spi_nor *nor)
{
        int sr = read_sr(nor);
        if (sr < 0)
                return sr;
        else
                return !(sr & SR_WIP);
}

static inline int spi_nor_fsr_ready(struct spi_nor *nor)
{
        int fsr = read_fsr(nor);
        if (fsr < 0)
                return fsr;
        else
                return fsr & FSR_READY;
}

static int spi_nor_ready(struct spi_nor *nor)
{
        int sr, fsr;
        sr = spi_nor_sr_ready(nor);
        if (sr < 0)
                return sr;
        fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
        if (fsr < 0)
                return fsr;
        return sr && fsr;
}

/*
 * Service routine to read status register until ready, or timeout occurs.
 * Returns non-zero if error.
 */
static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor,
                                                unsigned long timeout_jiffies)
{
        unsigned long deadline;
        int timeout = 0, ret;

        deadline = jiffies + timeout_jiffies;

        while (!timeout) {
                if (time_after_eq(jiffies, deadline))
                        timeout = 1;

                ret = spi_nor_ready(nor);
                if (ret < 0)
                        return ret;
                if (ret)
                        return 0;

                cond_resched();
        }

        dev_err(nor->dev, "flash operation timed out\n");

        return -ETIMEDOUT;
}

static int spi_nor_wait_till_ready(struct spi_nor *nor)
{
        return spi_nor_wait_till_ready_with_timeout(nor,
                                                    DEFAULT_READY_WAIT_JIFFIES);
}

/*
 * Erase the whole flash memory
 *
 * Returns 0 if successful, non-zero otherwise.
 */
static int erase_chip(struct spi_nor *nor)
{
        dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10));

        return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0);
}

static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops)
{
        int ret = 0;

        mutex_lock(&nor->lock);

        if (nor->prepare) {
                ret = nor->prepare(nor, ops);
                if (ret) {
                        dev_err(nor->dev, "failed in the preparation.\n");
                        mutex_unlock(&nor->lock);
                        return ret;
                }
        }
        return ret;
}

static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
{
        if (nor->unprepare)
                nor->unprepare(nor, ops);
        mutex_unlock(&nor->lock);
}

/*
 * Initiate the erasure of a single sector
 */
static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
{
        u8 buf[SPI_NOR_MAX_ADDR_WIDTH];
        int i;

        if (nor->erase)
                return nor->erase(nor, addr);

        /*
         * Default implementation, if driver doesn't have a specialized HW
         * control
         */
        for (i = nor->addr_width - 1; i >= 0; i--) {
                buf[i] = addr & 0xff;
                addr >>= 8;
        }

        return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width);
}

/*
 * Erase an address range on the nor chip.  The address range may extend
 * one or more erase sectors.  Return an error is there is a problem erasing.
 */
static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
{
        struct spi_nor *nor = mtd_to_spi_nor(mtd);
        u32 addr, len;
        uint32_t rem;
        int ret;

        dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
                        (long long)instr->len);

        div_u64_rem(instr->len, mtd->erasesize, &rem);
        if (rem)
                return -EINVAL;

        addr = instr->addr;
        len = instr->len;

        ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_ERASE);
        if (ret)
                return ret;

        /* whole-chip erase? */
        if (len == mtd->size) {
                unsigned long timeout;

                write_enable(nor);

                if (erase_chip(nor)) {
                        ret = -EIO;
                        goto erase_err;
                }

                /*
                 * Scale the timeout linearly with the size of the flash, with
                 * a minimum calibrated to an old 2MB flash. We could try to
                 * pull these from CFI/SFDP, but these values should be good
                 * enough for now.
                 */
                timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES,
                              CHIP_ERASE_2MB_READY_WAIT_JIFFIES *
                              (unsigned long)(mtd->size / SZ_2M));
                ret = spi_nor_wait_till_ready_with_timeout(nor, timeout);
                if (ret)
                        goto erase_err;

        /* REVISIT in some cases we could speed up erasing large regions
         * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K.  We may have set up
         * to use "small sector erase", but that's not always optimal.
         */

        /* "sector"-at-a-time erase */
        } else {
                while (len) {
                        write_enable(nor);

                        ret = spi_nor_erase_sector(nor, addr);
                        if (ret)
                                goto erase_err;

                        addr += mtd->erasesize;
                        len -= mtd->erasesize;

                        ret = spi_nor_wait_till_ready(nor);
                        if (ret)
                                goto erase_err;
                }
        }

        write_disable(nor);

erase_err:
        spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);

        instr->state = ret ? MTD_ERASE_FAILED : MTD_ERASE_DONE;
        mtd_erase_callback(instr);

        return ret;
}

static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs,
                                 uint64_t *len)
{
        struct mtd_info *mtd = &nor->mtd;
        u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
        int shift = ffs(mask) - 1;
        int pow;

        if (!(sr & mask)) {
                /* No protection */
                *ofs = 0;
                *len = 0;
        } else {
                pow = ((sr & mask) ^ mask) >> shift;
                *len = mtd->size >> pow;
                if (nor->flags & SNOR_F_HAS_SR_TB && sr & SR_TB)
                        *ofs = 0;
                else
                        *ofs = mtd->size - *len;
        }
}

/*
 * Return 1 if the entire region is locked (if @locked is true) or unlocked (if
 * @locked is false); 0 otherwise
 */
static int stm_check_lock_status_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
                                    u8 sr, bool locked)
{
        loff_t lock_offs;
        uint64_t lock_len;

        if (!len)
                return 1;

        stm_get_locked_range(nor, sr, &lock_offs, &lock_len);

        if (locked)
                /* Requested range is a sub-range of locked range */
                return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
        else
                /* Requested range does not overlap with locked range */
                return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs);
}

static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
                            u8 sr)
{
        return stm_check_lock_status_sr(nor, ofs, len, sr, true);
}

static int stm_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
                              u8 sr)
{
        return stm_check_lock_status_sr(nor, ofs, len, sr, false);
}

/*
 * Lock a region of the flash. Compatible with ST Micro and similar flash.
 * Supports the block protection bits BP{0,1,2} in the status register
 * (SR). Does not support these features found in newer SR bitfields:
 *   - SEC: sector/block protect - only handle SEC=0 (block protect)
 *   - CMP: complement protect - only support CMP=0 (range is not complemented)
 *
 * Support for the following is provided conditionally for some flash:
 *   - TB: top/bottom protect
 *
 * Sample table portion for 8MB flash (Winbond w25q64fw):
 *
 *   SEC  |  TB   |  BP2  |  BP1  |  BP0  |  Prot Length  | Protected Portion
 *  --------------------------------------------------------------------------
 *    X   |   X   |   0   |   0   |   0   |  NONE         | NONE
 *    0   |   0   |   0   |   0   |   1   |  128 KB       | Upper 1/64
 *    0   |   0   |   0   |   1   |   0   |  256 KB       | Upper 1/32
 *    0   |   0   |   0   |   1   |   1   |  512 KB       | Upper 1/16
 *    0   |   0   |   1   |   0   |   0   |  1 MB         | Upper 1/8
 *    0   |   0   |   1   |   0   |   1   |  2 MB         | Upper 1/4
 *    0   |   0   |   1   |   1   |   0   |  4 MB         | Upper 1/2
 *    X   |   X   |   1   |   1   |   1   |  8 MB         | ALL
 *  ------|-------|-------|-------|-------|---------------|-------------------
 *    0   |   1   |   0   |   0   |   1   |  128 KB       | Lower 1/64
 *    0   |   1   |   0   |   1   |   0   |  256 KB       | Lower 1/32
 *    0   |   1   |   0   |   1   |   1   |  512 KB       | Lower 1/16
 *    0   |   1   |   1   |   0   |   0   |  1 MB         | Lower 1/8
 *    0   |   1   |   1   |   0   |   1   |  2 MB         | Lower 1/4
 *    0   |   1   |   1   |   1   |   0   |  4 MB         | Lower 1/2
 *
 * Returns negative on errors, 0 on success.
 */
static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
{
        struct mtd_info *mtd = &nor->mtd;
        int status_old, status_new;
        u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
        u8 shift = ffs(mask) - 1, pow, val;
        loff_t lock_len;
        bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
        bool use_top;
        int ret;

        status_old = read_sr(nor);
        if (status_old < 0)
                return status_old;

        /* If nothing in our range is unlocked, we don't need to do anything */
        if (stm_is_locked_sr(nor, ofs, len, status_old))
                return 0;

        /* If anything below us is unlocked, we can't use 'bottom' protection */
        if (!stm_is_locked_sr(nor, 0, ofs, status_old))
                can_be_bottom = false;

        /* If anything above us is unlocked, we can't use 'top' protection */
        if (!stm_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
                                status_old))
                can_be_top = false;

        if (!can_be_bottom && !can_be_top)
                return -EINVAL;

        /* Prefer top, if both are valid */
        use_top = can_be_top;

        /* lock_len: length of region that should end up locked */
        if (use_top)
                lock_len = mtd->size - ofs;
        else
                lock_len = ofs + len;

        /*
         * Need smallest pow such that:
         *
         *   1 / (2^pow) <= (len / size)
         *
         * so (assuming power-of-2 size) we do:
         *
         *   pow = ceil(log2(size / len)) = log2(size) - floor(log2(len))
         */
        pow = ilog2(mtd->size) - ilog2(lock_len);
        val = mask - (pow << shift);
        if (val & ~mask)
                return -EINVAL;
        /* Don't "lock" with no region! */
        if (!(val & mask))
                return -EINVAL;

        status_new = (status_old & ~mask & ~SR_TB) | val;

        /* Disallow further writes if WP pin is asserted */
        status_new |= SR_SRWD;

        if (!use_top)
                status_new |= SR_TB;

        /* Don't bother if they're the same */
        if (status_new == status_old)
                return 0;

        /* Only modify protection if it will not unlock other areas */
        if ((status_new & mask) < (status_old & mask))
                return -EINVAL;

        write_enable(nor);
        ret = write_sr(nor, status_new);
        if (ret)
                return ret;
        return spi_nor_wait_till_ready(nor);
}

/*
 * Unlock a region of the flash. See stm_lock() for more info
 *
 * Returns negative on errors, 0 on success.
 */
static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
{
        struct mtd_info *mtd = &nor->mtd;
        int status_old, status_new;
        u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
        u8 shift = ffs(mask) - 1, pow, val;
        loff_t lock_len;
        bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
        bool use_top;
        int ret;

        status_old = read_sr(nor);
        if (status_old < 0)
                return status_old;

        /* If nothing in our range is locked, we don't need to do anything */
        if (stm_is_unlocked_sr(nor, ofs, len, status_old))
                return 0;

        /* If anything below us is locked, we can't use 'top' protection */
        if (!stm_is_unlocked_sr(nor, 0, ofs, status_old))
                can_be_top = false;

        /* If anything above us is locked, we can't use 'bottom' protection */
        if (!stm_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
                                status_old))
                can_be_bottom = false;

        if (!can_be_bottom && !can_be_top)
                return -EINVAL;

        /* Prefer top, if both are valid */
        use_top = can_be_top;

        /* lock_len: length of region that should remain locked */
        if (use_top)
                lock_len = mtd->size - (ofs + len);
        else
                lock_len = ofs;

        /*
         * Need largest pow such that:
         *
         *   1 / (2^pow) >= (len / size)
         *
         * so (assuming power-of-2 size) we do:
         *
         *   pow = floor(log2(size / len)) = log2(size) - ceil(log2(len))
         */
        pow = ilog2(mtd->size) - order_base_2(lock_len);
        if (lock_len == 0) {
                val = 0; /* fully unlocked */
        } else {
                val = mask - (pow << shift);
                /* Some power-of-two sizes are not supported */
                if (val & ~mask)
                        return -EINVAL;
        }

        status_new = (status_old & ~mask & ~SR_TB) | val;

        /* Don't protect status register if we're fully unlocked */
        if (lock_len == mtd->size)
                status_new &= ~SR_SRWD;

        if (!use_top)
                status_new |= SR_TB;

        /* Don't bother if they're the same */
        if (status_new == status_old)
                return 0;

        /* Only modify protection if it will not lock other areas */
        if ((status_new & mask) > (status_old & mask))
                return -EINVAL;

        write_enable(nor);
        ret = write_sr(nor, status_new);
        if (ret)
                return ret;
        return spi_nor_wait_till_ready(nor);
}

/*
 * Check if a region of the flash is (completely) locked. See stm_lock() for
 * more info.
 *
 * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
 * negative on errors.
 */
static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
{
        int status;

        status = read_sr(nor);
        if (status < 0)
                return status;

        return stm_is_locked_sr(nor, ofs, len, status);
}

static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
        struct spi_nor *nor = mtd_to_spi_nor(mtd);
        int ret;

        ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK);
        if (ret)
                return ret;

        ret = nor->flash_lock(nor, ofs, len);

        spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK);
        return ret;
}

static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
        struct spi_nor *nor = mtd_to_spi_nor(mtd);
        int ret;

        ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_UNLOCK);
        if (ret)
                return ret;

        ret = nor->flash_unlock(nor, ofs, len);

        spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
        return ret;
}

static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
        struct spi_nor *nor = mtd_to_spi_nor(mtd);
        int ret;

        ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_UNLOCK);
        if (ret)
                return ret;

        ret = nor->flash_is_locked(nor, ofs, len);

        spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
        return ret;
}

/* Used when the "_ext_id" is two bytes at most */
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)      \
                .id = {                                                 \
                        ((_jedec_id) >> 16) & 0xff,                     \
                        ((_jedec_id) >> 8) & 0xff,                      \
                        (_jedec_id) & 0xff,                             \
                        ((_ext_id) >> 8) & 0xff,                        \
                        (_ext_id) & 0xff,                               \
                        },                                              \
                .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),       \
                .sector_size = (_sector_size),                          \
                .n_sectors = (_n_sectors),                              \
                .page_size = 256,                                       \
                .flags = (_flags),

#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)     \
                .id = {                                                 \
                        ((_jedec_id) >> 16) & 0xff,                     \
                        ((_jedec_id) >> 8) & 0xff,                      \
                        (_jedec_id) & 0xff,                             \
                        ((_ext_id) >> 16) & 0xff,                       \
                        ((_ext_id) >> 8) & 0xff,                        \
                        (_ext_id) & 0xff,                               \
                        },                                              \
                .id_len = 6,                                            \
                .sector_size = (_sector_size),                          \
                .n_sectors = (_n_sectors),                              \
                .page_size = 256,                                       \
                .flags = (_flags),

#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)   \
                .sector_size = (_sector_size),                          \
                .n_sectors = (_n_sectors),                              \
                .page_size = (_page_size),                              \
                .addr_width = (_addr_width),                            \
                .flags = (_flags),

/* NOTE: double check command sets and memory organization when you add
 * more nor chips.  This current list focusses on newer chips, which
 * have been converging on command sets which including JEDEC ID.
 *
 * All newly added entries should describe *hardware* and should use SECT_4K
 * (or SECT_4K_PMC) if hardware supports erasing 4 KiB sectors. For usage
 * scenarios excluding small sectors there is config option that can be
 * disabled: CONFIG_MTD_SPI_NOR_USE_4K_SECTORS.
 * For historical (and compatibility) reasons (before we got above config) some
 * old entries may be missing 4K flag.
 */
static const struct flash_info spi_nor_ids[] = {
        /* Atmel -- some are (confusingly) marketed as "DataFlash" */
        { "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
        { "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },

        { "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
        { "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
        { "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },

        { "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
        { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
        { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
        { "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },

        { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },

        /* EON -- en25xxx */
        { "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
        { "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
        { "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
        { "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
        { "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
        { "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
        { "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
        { "en25s64",    INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },

        /* ESMT */
        { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) },

        /* Everspin */
        { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
        { "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },

        /* Fujitsu */
        { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },

        /* GigaDevice */
        { "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64, SECT_4K) },
        { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
        { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) },

        /* Intel/Numonyx -- xxxs33b */
        { "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
        { "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
        { "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },

        /* ISSI */
        { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024,   2, SECT_4K) },

        /* Macronix */
        { "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
        { "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
        { "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
        { "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
        { "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
        { "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
        { "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
        { "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
        { "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
        { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
        { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
        { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
        { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
        { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
        { "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },

        /* Micron */
        { "n25q032",     INFO(0x20ba16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
        { "n25q032a",    INFO(0x20bb16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
        { "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
        { "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
        { "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
        { "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
        { "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
        { "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
        { "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
        { "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },

        /* PMC */
        { "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
        { "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
        { "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64, SECT_4K) },

        /* Spansion -- single (large) sector size only, at least
         * for the chips listed here (without boot sectors).
         */
        { "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
        { "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s25fl512s",  INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
        { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
        { "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
        { "s25fl128s",  INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
        { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
        { "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
        { "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
        { "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
        { "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
        { "s25fl004k",  INFO(0xef4013,      0,  64 * 1024,   8, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
        { "s25fl116k",  INFO(0x014015,      0,  64 * 1024,  32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
        { "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64, SECT_4K) },
        { "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128, SECT_4K) },
        { "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8, SECT_4K | SPI_NOR_DUAL_READ) },

        /* SST -- large erase sizes are "overlays", "sectors" are 4K */
        { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
        { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
        { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
        { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
        { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
        { "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1, SECT_4K | SST_WRITE) },
        { "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K | SST_WRITE) },
        { "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K | SST_WRITE) },
        { "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K) },
        { "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K) },
        { "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
        { "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },

        /* ST Microelectronics -- newer production may have feature updates */
        { "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
        { "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
        { "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
        { "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
        { "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
        { "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
        { "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
        { "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
        { "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },

        { "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
        { "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
        { "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
        { "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
        { "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
        { "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
        { "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
        { "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
        { "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },

        { "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
        { "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
        { "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },

        { "m25pe20", INFO(0x208012,  0, 64 * 1024,  4,       0) },
        { "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
        { "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },

        { "m25px16",    INFO(0x207115,  0, 64 * 1024, 32, SECT_4K) },
        { "m25px32",    INFO(0x207116,  0, 64 * 1024, 64, SECT_4K) },
        { "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
        { "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
        { "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
        { "m25px80",    INFO(0x207114,  0, 64 * 1024, 16, 0) },

        /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
        { "w25x05", INFO(0xef3010, 0, 64 * 1024,  1,  SECT_4K) },
        { "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
        { "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
        { "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
        { "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
        { "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
        { "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
        { "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
        {
                "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
                        SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
                        SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
        },
        { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
        { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
        {
                "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
                        SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
                        SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
        },
        {
                "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
                        SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
                        SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
        },
        { "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
        { "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
        { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
        { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },

        /* Catalyst / On Semiconductor -- non-JEDEC */
        { "cat25c11", CAT25_INFO(  16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
        { "cat25c03", CAT25_INFO(  32, 8, 16, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
        { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
        { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
        { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
        { },
};

static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
{
        int                     tmp;
        u8                      id[SPI_NOR_MAX_ID_LEN];
        const struct flash_info *info;

        tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
        if (tmp < 0) {
                dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp);
                return ERR_PTR(tmp);
        }

        for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
                info = &spi_nor_ids[tmp];
                if (info->id_len) {
                        if (!memcmp(info->id, id, info->id_len))
                                return &spi_nor_ids[tmp];
                }
        }
        dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
                id[0], id[1], id[2]);
        return ERR_PTR(-ENODEV);
}

static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
                        size_t *retlen, u_char *buf)
{
        struct spi_nor *nor = mtd_to_spi_nor(mtd);
        int ret;

        dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);

        ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_READ);
        if (ret)
                return ret;

        ret = nor->read(nor, from, len, retlen, buf);

        spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
        return ret;
}

static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
                size_t *retlen, const u_char *buf)
{
        struct spi_nor *nor = mtd_to_spi_nor(mtd);
        size_t actual;
        int ret;

        dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);

        ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
        if (ret)
                return ret;

        write_enable(nor);

        nor->sst_write_second = false;

        actual = to % 2;
        /* Start write from odd address. */
        if (actual) {
                nor->program_opcode = SPINOR_OP_BP;

                /* write one byte. */
                nor->write(nor, to, 1, retlen, buf);
                ret = spi_nor_wait_till_ready(nor);
                if (ret)
                        goto time_out;
        }
        to += actual;

        /* Write out most of the data here. */
        for (; actual < len - 1; actual += 2) {
                nor->program_opcode = SPINOR_OP_AAI_WP;

                /* write two bytes. */
                nor->write(nor, to, 2, retlen, buf + actual);
                ret = spi_nor_wait_till_ready(nor);
                if (ret)
                        goto time_out;
                to += 2;
                nor->sst_write_second = true;
        }
        nor->sst_write_second = false;

        write_disable(nor);
        ret = spi_nor_wait_till_ready(nor);
        if (ret)
                goto time_out;

        /* Write out trailing byte if it exists. */
        if (actual != len) {
                write_enable(nor);

                nor->program_opcode = SPINOR_OP_BP;
                nor->write(nor, to, 1, retlen, buf + actual);

                ret = spi_nor_wait_till_ready(nor);
                if (ret)
                        goto time_out;
                write_disable(nor);
        }
time_out:
        spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
        return ret;
}

/*
 * Write an address range to the nor chip.  Data must be written in
 * FLASH_PAGESIZE chunks.  The address range may be any size provided
 * it is within the physical boundaries.
 */
static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
        size_t *retlen, const u_char *buf)
{
        struct spi_nor *nor = mtd_to_spi_nor(mtd);
        u32 page_offset, page_size, i;
        int ret;

        dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);

        ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
        if (ret)
                return ret;

        write_enable(nor);

        page_offset = to & (nor->page_size - 1);

        /* do all the bytes fit onto one page? */
        if (page_offset + len <= nor->page_size) {
                nor->write(nor, to, len, retlen, buf);
        } else {
                /* the size of data remaining on the first page */
                page_size = nor->page_size - page_offset;
                nor->write(nor, to, page_size, retlen, buf);

                /* write everything in nor->page_size chunks */
                for (i = page_size; i < len; i += page_size) {
                        page_size = len - i;
                        if (page_size > nor->page_size)
                                page_size = nor->page_size;

                        ret = spi_nor_wait_till_ready(nor);
                        if (ret)
                                goto write_err;

                        write_enable(nor);

                        nor->write(nor, to + i, page_size, retlen, buf + i);
                }
        }

        ret = spi_nor_wait_till_ready(nor);
write_err:
        spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
        return ret;
}

static int macronix_quad_enable(struct spi_nor *nor)
{
        int ret, val;

        val = read_sr(nor);
        if (val < 0)
                return val;
        write_enable(nor);

        write_sr(nor, val | SR_QUAD_EN_MX);

        if (spi_nor_wait_till_ready(nor))
                return 1;

        ret = read_sr(nor);
        if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) {
                dev_err(nor->dev, "Macronix Quad bit not set\n");
                return -EINVAL;
        }

        return 0;
}

/*
 * Write status Register and configuration register with 2 bytes
 * The first byte will be written to the status register, while the
 * second byte will be written to the configuration register.
 * Return negative if error occured.
 */
static int write_sr_cr(struct spi_nor *nor, u16 val)
{
        nor->cmd_buf[0] = val & 0xff;
        nor->cmd_buf[1] = (val >> 8);

        return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2);
}

static int spansion_quad_enable(struct spi_nor *nor)
{
        int ret;
        int quad_en = CR_QUAD_EN_SPAN << 8;

        write_enable(nor);

        ret = write_sr_cr(nor, quad_en);
        if (ret < 0) {
                dev_err(nor->dev,
                        "error while writing configuration register\n");
                return -EINVAL;
        }

        /* read back and check it */
        ret = read_cr(nor);
        if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) {
                dev_err(nor->dev, "Spansion Quad bit not set\n");
                return -EINVAL;
        }

        return 0;
}

static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
{
        int status;

        switch (JEDEC_MFR(info)) {
        case SNOR_MFR_MACRONIX:
                status = macronix_quad_enable(nor);
                if (status) {
                        dev_err(nor->dev, "Macronix quad-read not enabled\n");
                        return -EINVAL;
                }
                return status;
        case SNOR_MFR_MICRON:
                return 0;
        default:
                status = spansion_quad_enable(nor);
                if (status) {
                        dev_err(nor->dev, "Spansion quad-read not enabled\n");
                        return -EINVAL;
                }
                return status;
        }
}

static int spi_nor_check(struct spi_nor *nor)
{
        if (!nor->dev || !nor->read || !nor->write ||
                !nor->read_reg || !nor->write_reg) {
                pr_err("spi-nor: please fill all the necessary fields!\n");
                return -EINVAL;
        }

        return 0;
}

int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
{
        const struct flash_info *info = NULL;
        struct device *dev = nor->dev;
        struct mtd_info *mtd = &nor->mtd;
        struct device_node *np = spi_nor_get_flash_node(nor);
        int ret;
        int i;

        ret = spi_nor_check(nor);
        if (ret)
                return ret;

        if (name)
                info = spi_nor_match_id(name);
        /* Try to auto-detect if chip name wasn't specified or not found */
        if (!info)
                info = spi_nor_read_id(nor);
        if (IS_ERR_OR_NULL(info))
                return -ENOENT;

        /*
         * If caller has specified name of flash model that can normally be
         * detected using JEDEC, let's verify it.
         */
        if (name && info->id_len) {
                const struct flash_info *jinfo;

                jinfo = spi_nor_read_id(nor);
                if (IS_ERR(jinfo)) {
                        return PTR_ERR(jinfo);
                } else if (jinfo != info) {
                        /*
                         * JEDEC knows better, so overwrite platform ID. We
                         * can't trust partitions any longer, but we'll let
                         * mtd apply them anyway, since some partitions may be
                         * marked read-only, and we don't want to lose that
                         * information, even if it's not 100% accurate.
                         */
                        dev_warn(dev, "found %s, expected %s\n",
                                 jinfo->name, info->name);
                        info = jinfo;
                }
        }

        mutex_init(&nor->lock);

        /*
         * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
         * with the software protection bits set
         */

        if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
            JEDEC_MFR(info) == SNOR_MFR_INTEL ||
            JEDEC_MFR(info) == SNOR_MFR_SST ||
            info->flags & SPI_NOR_HAS_LOCK) {
                write_enable(nor);
                write_sr(nor, 0);
                spi_nor_wait_till_ready(nor);
        }

        if (!mtd->name)
                mtd->name = dev_name(dev);
        mtd->priv = nor;
        mtd->type = MTD_NORFLASH;
        mtd->writesize = 1;
        mtd->flags = MTD_CAP_NORFLASH;
        mtd->size = info->sector_size * info->n_sectors;
        mtd->_erase = spi_nor_erase;
        mtd->_read = spi_nor_read;

        /* NOR protection support for STmicro/Micron chips and similar */
        if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
                        info->flags & SPI_NOR_HAS_LOCK) {
                nor->flash_lock = stm_lock;
                nor->flash_unlock = stm_unlock;
                nor->flash_is_locked = stm_is_locked;
        }

        if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) {
                mtd->_lock = spi_nor_lock;
                mtd->_unlock = spi_nor_unlock;
                mtd->_is_locked = spi_nor_is_locked;
        }

        /* sst nor chips use AAI word program */
        if (info->flags & SST_WRITE)
                mtd->_write = sst_write;
        else
                mtd->_write = spi_nor_write;

        if (info->flags & USE_FSR)
                nor->flags |= SNOR_F_USE_FSR;
        if (info->flags & SPI_NOR_HAS_TB)
                nor->flags |= SNOR_F_HAS_SR_TB;

#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
        /* prefer "small sector" erase if possible */
        if (info->flags & SECT_4K) {
                nor->erase_opcode = SPINOR_OP_BE_4K;
                mtd->erasesize = 4096;
        } else if (info->flags & SECT_4K_PMC) {
                nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
                mtd->erasesize = 4096;
        } else
#endif
        {
                nor->erase_opcode = SPINOR_OP_SE;
                mtd->erasesize = info->sector_size;
        }

        if (info->flags & SPI_NOR_NO_ERASE)
                mtd->flags |= MTD_NO_ERASE;

        mtd->dev.parent = dev;
        nor->page_size = info->page_size;
        mtd->writebufsize = nor->page_size;

        if (np) {
                /* If we were instantiated by DT, use it */
                if (of_property_read_bool(np, "m25p,fast-read"))
                        nor->flash_read = SPI_NOR_FAST;
                else
                        nor->flash_read = SPI_NOR_NORMAL;
        } else {
                /* If we weren't instantiated by DT, default to fast-read */
                nor->flash_read = SPI_NOR_FAST;
        }

        /* Some devices cannot do fast-read, no matter what DT tells us */
        if (info->flags & SPI_NOR_NO_FR)
                nor->flash_read = SPI_NOR_NORMAL;

        /* Quad/Dual-read mode takes precedence over fast/normal */
        if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
                ret = set_quad_mode(nor, info);
                if (ret) {
                        dev_err(dev, "quad mode not supported\n");
                        return ret;
                }
                nor->flash_read = SPI_NOR_QUAD;
        } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
                nor->flash_read = SPI_NOR_DUAL;
        }

        /* Default commands */
        switch (nor->flash_read) {
        case SPI_NOR_QUAD:
                nor->read_opcode = SPINOR_OP_READ_1_1_4;
                break;
        case SPI_NOR_DUAL:
                nor->read_opcode = SPINOR_OP_READ_1_1_2;
                break;
        case SPI_NOR_FAST:
                nor->read_opcode = SPINOR_OP_READ_FAST;
                break;
        case SPI_NOR_NORMAL:
                nor->read_opcode = SPINOR_OP_READ;
                break;
        default:
                dev_err(dev, "No Read opcode defined\n");
                return -EINVAL;
        }

        nor->program_opcode = SPINOR_OP_PP;

        if (info->addr_width)
                nor->addr_width = info->addr_width;
        else if (mtd->size > 0x1000000) {
                /* enable 4-byte addressing if the device exceeds 16MiB */
                nor->addr_width = 4;
                if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) {
                        /* Dedicated 4-byte command set */
                        switch (nor->flash_read) {
                        case SPI_NOR_QUAD:
                                nor->read_opcode = SPINOR_OP_READ4_1_1_4;
                                break;
                        case SPI_NOR_DUAL:
                                nor->read_opcode = SPINOR_OP_READ4_1_1_2;
                                break;
                        case SPI_NOR_FAST:
                                nor->read_opcode = SPINOR_OP_READ4_FAST;
                                break;
                        case SPI_NOR_NORMAL:
                                nor->read_opcode = SPINOR_OP_READ4;
                                break;
                        }
                        nor->program_opcode = SPINOR_OP_PP_4B;
                        /* No small sector erase for 4-byte command set */
                        nor->erase_opcode = SPINOR_OP_SE_4B;
                        mtd->erasesize = info->sector_size;
                } else
                        set_4byte(nor, info, 1);
        } else {
                nor->addr_width = 3;
        }

        if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
                dev_err(dev, "address width is too large: %u\n",
                        nor->addr_width);
                return -EINVAL;
        }

        nor->read_dummy = spi_nor_read_dummy_cycles(nor);

        dev_info(dev, "%s (%lld Kbytes)\n", info->name,
                        (long long)mtd->size >> 10);

        dev_dbg(dev,
                "mtd .name = %s, .size = 0x%llx (%lldMiB), "
                ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
                mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
                mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);

        if (mtd->numeraseregions)
                for (i = 0; i < mtd->numeraseregions; i++)
                        dev_dbg(dev,
                                "mtd.eraseregions[%d] = { .offset = 0x%llx, "
                                ".erasesize = 0x%.8x (%uKiB), "
                                ".numblocks = %d }\n",
                                i, (long long)mtd->eraseregions[i].offset,
                                mtd->eraseregions[i].erasesize,
                                mtd->eraseregions[i].erasesize / 1024,
                                mtd->eraseregions[i].numblocks);
        return 0;
}
EXPORT_SYMBOL_GPL(spi_nor_scan);

static const struct flash_info *spi_nor_match_id(const char *name)
{
        const struct flash_info *id = spi_nor_ids;

        while (id->name) {
                if (!strcmp(name, id->name))
                        return id;
                id++;
        }
        return NULL;
}

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
MODULE_AUTHOR("Mike Lavender");
MODULE_DESCRIPTION("framework for SPI NOR");