]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/net/arcnet/com20020-pci.c
239de38fbd6a588bbb0e90e3452ea60ca1e5a161
[mirror_ubuntu-artful-kernel.git] / drivers / net / arcnet / com20020-pci.c
1 /*
2 * Linux ARCnet driver - COM20020 PCI support
3 * Contemporary Controls PCI20 and SOHARD SH-ARC PCI
4 *
5 * Written 1994-1999 by Avery Pennarun,
6 * based on an ISA version by David Woodhouse.
7 * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
8 * Derived from skeleton.c by Donald Becker.
9 *
10 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
11 * for sponsoring the further development of this driver.
12 *
13 * **********************
14 *
15 * The original copyright of skeleton.c was as follows:
16 *
17 * skeleton.c Written 1993 by Donald Becker.
18 * Copyright 1993 United States Government as represented by the
19 * Director, National Security Agency. This software may only be used
20 * and distributed according to the terms of the GNU General Public License as
21 * modified by SRC, incorporated herein by reference.
22 *
23 * **********************
24 *
25 * For more details, see drivers/net/arcnet.c
26 *
27 * **********************
28 */
29
30 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
31
32 #include <linux/module.h>
33 #include <linux/moduleparam.h>
34 #include <linux/kernel.h>
35 #include <linux/types.h>
36 #include <linux/ioport.h>
37 #include <linux/errno.h>
38 #include <linux/netdevice.h>
39 #include <linux/init.h>
40 #include <linux/interrupt.h>
41 #include <linux/pci.h>
42 #include <linux/list.h>
43 #include <linux/io.h>
44 #include <linux/leds.h>
45
46 #include "arcdevice.h"
47 #include "com20020.h"
48
49 /* Module parameters */
50
51 static int node;
52 static char device[9]; /* use eg. device="arc1" to change name */
53 static int timeout = 3;
54 static int backplane;
55 static int clockp;
56 static int clockm;
57
58 module_param(node, int, 0);
59 module_param_string(device, device, sizeof(device), 0);
60 module_param(timeout, int, 0);
61 module_param(backplane, int, 0);
62 module_param(clockp, int, 0);
63 module_param(clockm, int, 0);
64 MODULE_LICENSE("GPL");
65
66 static void led_tx_set(struct led_classdev *led_cdev,
67 enum led_brightness value)
68 {
69 struct com20020_dev *card;
70 struct com20020_priv *priv;
71 struct com20020_pci_card_info *ci;
72
73 card = container_of(led_cdev, struct com20020_dev, tx_led);
74
75 priv = card->pci_priv;
76 ci = priv->ci;
77
78 outb(!!value, priv->misc + ci->leds[card->index].green);
79 }
80
81 static void led_recon_set(struct led_classdev *led_cdev,
82 enum led_brightness value)
83 {
84 struct com20020_dev *card;
85 struct com20020_priv *priv;
86 struct com20020_pci_card_info *ci;
87
88 card = container_of(led_cdev, struct com20020_dev, recon_led);
89
90 priv = card->pci_priv;
91 ci = priv->ci;
92
93 outb(!!value, priv->misc + ci->leds[card->index].red);
94 }
95
96 static void com20020pci_remove(struct pci_dev *pdev);
97
98 static int com20020pci_probe(struct pci_dev *pdev,
99 const struct pci_device_id *id)
100 {
101 struct com20020_pci_card_info *ci;
102 struct com20020_pci_channel_map *mm;
103 struct net_device *dev;
104 struct arcnet_local *lp;
105 struct com20020_priv *priv;
106 int i, ioaddr, ret;
107 struct resource *r;
108
109 if (pci_enable_device(pdev))
110 return -EIO;
111
112 priv = devm_kzalloc(&pdev->dev, sizeof(struct com20020_priv),
113 GFP_KERNEL);
114 if (!priv)
115 return -ENOMEM;
116
117 ci = (struct com20020_pci_card_info *)id->driver_data;
118 priv->ci = ci;
119 mm = &ci->misc_map;
120
121 INIT_LIST_HEAD(&priv->list_dev);
122
123 if (mm->size) {
124 ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset;
125 r = devm_request_region(&pdev->dev, ioaddr, mm->size,
126 "com20020-pci");
127 if (!r) {
128 pr_err("IO region %xh-%xh already allocated.\n",
129 ioaddr, ioaddr + mm->size - 1);
130 return -EBUSY;
131 }
132 priv->misc = ioaddr;
133 }
134
135 for (i = 0; i < ci->devcount; i++) {
136 struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i];
137 struct com20020_dev *card;
138
139 dev = alloc_arcdev(device);
140 if (!dev) {
141 ret = -ENOMEM;
142 goto out_port;
143 }
144 dev->dev_port = i;
145
146 dev->netdev_ops = &com20020_netdev_ops;
147
148 lp = netdev_priv(dev);
149
150 arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name);
151 ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset;
152
153 r = devm_request_region(&pdev->dev, ioaddr, cm->size,
154 "com20020-pci");
155 if (!r) {
156 pr_err("IO region %xh-%xh already allocated\n",
157 ioaddr, ioaddr + cm->size - 1);
158 ret = -EBUSY;
159 goto out_port;
160 }
161
162 /* Dummy access after Reset
163 * ARCNET controller needs
164 * this access to detect bustype
165 */
166 arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND);
167 arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT);
168
169 dev->base_addr = ioaddr;
170 dev->dev_addr[0] = node;
171 dev->irq = pdev->irq;
172 lp->card_name = "PCI COM20020";
173 lp->card_flags = ci->flags;
174 lp->backplane = backplane;
175 lp->clockp = clockp & 7;
176 lp->clockm = clockm & 3;
177 lp->timeout = timeout;
178 lp->hw.owner = THIS_MODULE;
179
180 /* Get the dev_id from the PLX rotary coder */
181 if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15))
182 dev->dev_id = 0xc;
183 dev->dev_id ^= inb(priv->misc + ci->rotary) >> 4;
184
185 snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);
186
187 if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
188 pr_err("IO address %Xh is empty!\n", ioaddr);
189 ret = -EIO;
190 goto out_port;
191 }
192 if (com20020_check(dev)) {
193 ret = -EIO;
194 goto out_port;
195 }
196
197 card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
198 GFP_KERNEL);
199 if (!card)
200 return -ENOMEM;
201
202 card->index = i;
203 card->pci_priv = priv;
204 card->tx_led.brightness_set = led_tx_set;
205 card->tx_led.default_trigger = devm_kasprintf(&pdev->dev,
206 GFP_KERNEL, "arc%d-%d-tx",
207 dev->dev_id, i);
208 card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
209 "pci:green:tx:%d-%d",
210 dev->dev_id, i);
211
212 card->tx_led.dev = &dev->dev;
213 card->recon_led.brightness_set = led_recon_set;
214 card->recon_led.default_trigger = devm_kasprintf(&pdev->dev,
215 GFP_KERNEL, "arc%d-%d-recon",
216 dev->dev_id, i);
217 card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
218 "pci:red:recon:%d-%d",
219 dev->dev_id, i);
220 card->recon_led.dev = &dev->dev;
221 card->dev = dev;
222
223 ret = devm_led_classdev_register(&pdev->dev, &card->tx_led);
224 if (ret)
225 goto out_port;
226
227 ret = devm_led_classdev_register(&pdev->dev, &card->recon_led);
228 if (ret)
229 goto out_port;
230
231 dev_set_drvdata(&dev->dev, card);
232
233 ret = com20020_found(dev, IRQF_SHARED);
234 if (ret)
235 goto out_port;
236
237 devm_arcnet_led_init(dev, dev->dev_id, i);
238
239 list_add(&card->list, &priv->list_dev);
240 }
241
242 pci_set_drvdata(pdev, priv);
243
244 return 0;
245
246 out_port:
247 com20020pci_remove(pdev);
248 return ret;
249 }
250
251 static void com20020pci_remove(struct pci_dev *pdev)
252 {
253 struct com20020_dev *card, *tmpcard;
254 struct com20020_priv *priv;
255
256 priv = pci_get_drvdata(pdev);
257
258 list_for_each_entry_safe(card, tmpcard, &priv->list_dev, list) {
259 struct net_device *dev = card->dev;
260
261 unregister_netdev(dev);
262 free_irq(dev->irq, dev);
263 free_netdev(dev);
264 }
265 }
266
267 static struct com20020_pci_card_info card_info_10mbit = {
268 .name = "ARC-PCI",
269 .devcount = 1,
270 .chan_map_tbl = {
271 {
272 .bar = 2,
273 .offset = 0x00,
274 .size = 0x08,
275 },
276 },
277 .flags = ARC_CAN_10MBIT,
278 };
279
280 static struct com20020_pci_card_info card_info_5mbit = {
281 .name = "ARC-PCI",
282 .devcount = 1,
283 .chan_map_tbl = {
284 {
285 .bar = 2,
286 .offset = 0x00,
287 .size = 0x08,
288 },
289 },
290 .flags = ARC_IS_5MBIT,
291 };
292
293 static struct com20020_pci_card_info card_info_sohard = {
294 .name = "PLX-PCI",
295 .devcount = 1,
296 /* SOHARD needs PCI base addr 4 */
297 .chan_map_tbl = {
298 {
299 .bar = 4,
300 .offset = 0x00,
301 .size = 0x08
302 },
303 },
304 .flags = ARC_CAN_10MBIT,
305 };
306
307 static struct com20020_pci_card_info card_info_eae_arc1 = {
308 .name = "EAE PLX-PCI ARC1",
309 .devcount = 1,
310 .chan_map_tbl = {
311 {
312 .bar = 2,
313 .offset = 0x00,
314 .size = 0x08,
315 },
316 },
317 .misc_map = {
318 .bar = 2,
319 .offset = 0x10,
320 .size = 0x04,
321 },
322 .leds = {
323 {
324 .green = 0x0,
325 .red = 0x1,
326 },
327 },
328 .rotary = 0x0,
329 .flags = ARC_CAN_10MBIT,
330 };
331
332 static struct com20020_pci_card_info card_info_eae_ma1 = {
333 .name = "EAE PLX-PCI MA1",
334 .devcount = 2,
335 .chan_map_tbl = {
336 {
337 .bar = 2,
338 .offset = 0x00,
339 .size = 0x08,
340 }, {
341 .bar = 2,
342 .offset = 0x08,
343 .size = 0x08,
344 }
345 },
346 .misc_map = {
347 .bar = 2,
348 .offset = 0x10,
349 .size = 0x04,
350 },
351 .leds = {
352 {
353 .green = 0x0,
354 .red = 0x1,
355 }, {
356 .green = 0x2,
357 .red = 0x3,
358 },
359 },
360 .rotary = 0x0,
361 .flags = ARC_CAN_10MBIT,
362 };
363
364 static const struct pci_device_id com20020pci_id_table[] = {
365 {
366 0x1571, 0xa001,
367 PCI_ANY_ID, PCI_ANY_ID,
368 0, 0,
369 0,
370 },
371 {
372 0x1571, 0xa002,
373 PCI_ANY_ID, PCI_ANY_ID,
374 0, 0,
375 0,
376 },
377 {
378 0x1571, 0xa003,
379 PCI_ANY_ID, PCI_ANY_ID,
380 0, 0,
381 0
382 },
383 {
384 0x1571, 0xa004,
385 PCI_ANY_ID, PCI_ANY_ID,
386 0, 0,
387 0,
388 },
389 {
390 0x1571, 0xa005,
391 PCI_ANY_ID, PCI_ANY_ID,
392 0, 0,
393 0
394 },
395 {
396 0x1571, 0xa006,
397 PCI_ANY_ID, PCI_ANY_ID,
398 0, 0,
399 0
400 },
401 {
402 0x1571, 0xa007,
403 PCI_ANY_ID, PCI_ANY_ID,
404 0, 0,
405 0
406 },
407 {
408 0x1571, 0xa008,
409 PCI_ANY_ID, PCI_ANY_ID,
410 0, 0,
411 0
412 },
413 {
414 0x1571, 0xa009,
415 PCI_ANY_ID, PCI_ANY_ID,
416 0, 0,
417 (kernel_ulong_t)&card_info_5mbit
418 },
419 {
420 0x1571, 0xa00a,
421 PCI_ANY_ID, PCI_ANY_ID,
422 0, 0,
423 (kernel_ulong_t)&card_info_5mbit
424 },
425 {
426 0x1571, 0xa00b,
427 PCI_ANY_ID, PCI_ANY_ID,
428 0, 0,
429 (kernel_ulong_t)&card_info_5mbit
430 },
431 {
432 0x1571, 0xa00c,
433 PCI_ANY_ID, PCI_ANY_ID,
434 0, 0,
435 (kernel_ulong_t)&card_info_5mbit
436 },
437 {
438 0x1571, 0xa00d,
439 PCI_ANY_ID, PCI_ANY_ID,
440 0, 0,
441 (kernel_ulong_t)&card_info_5mbit
442 },
443 {
444 0x1571, 0xa00e,
445 PCI_ANY_ID, PCI_ANY_ID,
446 0, 0,
447 (kernel_ulong_t)&card_info_5mbit
448 },
449 {
450 0x1571, 0xa201,
451 PCI_ANY_ID, PCI_ANY_ID,
452 0, 0,
453 (kernel_ulong_t)&card_info_10mbit
454 },
455 {
456 0x1571, 0xa202,
457 PCI_ANY_ID, PCI_ANY_ID,
458 0, 0,
459 (kernel_ulong_t)&card_info_10mbit
460 },
461 {
462 0x1571, 0xa203,
463 PCI_ANY_ID, PCI_ANY_ID,
464 0, 0,
465 (kernel_ulong_t)&card_info_10mbit
466 },
467 {
468 0x1571, 0xa204,
469 PCI_ANY_ID, PCI_ANY_ID,
470 0, 0,
471 (kernel_ulong_t)&card_info_10mbit
472 },
473 {
474 0x1571, 0xa205,
475 PCI_ANY_ID, PCI_ANY_ID,
476 0, 0,
477 (kernel_ulong_t)&card_info_10mbit
478 },
479 {
480 0x1571, 0xa206,
481 PCI_ANY_ID, PCI_ANY_ID,
482 0, 0,
483 (kernel_ulong_t)&card_info_10mbit
484 },
485 {
486 0x10B5, 0x9030,
487 0x10B5, 0x2978,
488 0, 0,
489 (kernel_ulong_t)&card_info_sohard
490 },
491 {
492 0x10B5, 0x9050,
493 0x10B5, 0x2273,
494 0, 0,
495 (kernel_ulong_t)&card_info_sohard
496 },
497 {
498 0x10B5, 0x9050,
499 0x10B5, 0x3263,
500 0, 0,
501 (kernel_ulong_t)&card_info_eae_arc1
502 },
503 {
504 0x10B5, 0x9050,
505 0x10B5, 0x3292,
506 0, 0,
507 (kernel_ulong_t)&card_info_eae_ma1
508 },
509 {
510 0x14BA, 0x6000,
511 PCI_ANY_ID, PCI_ANY_ID,
512 0, 0,
513 (kernel_ulong_t)&card_info_10mbit
514 },
515 {
516 0x10B5, 0x2200,
517 PCI_ANY_ID, PCI_ANY_ID,
518 0, 0,
519 (kernel_ulong_t)&card_info_10mbit
520 },
521 { 0, }
522 };
523
524 MODULE_DEVICE_TABLE(pci, com20020pci_id_table);
525
526 static struct pci_driver com20020pci_driver = {
527 .name = "com20020",
528 .id_table = com20020pci_id_table,
529 .probe = com20020pci_probe,
530 .remove = com20020pci_remove,
531 };
532
533 static int __init com20020pci_init(void)
534 {
535 if (BUGLVL(D_NORMAL))
536 pr_info("%s\n", "COM20020 PCI support");
537 return pci_register_driver(&com20020pci_driver);
538 }
539
540 static void __exit com20020pci_cleanup(void)
541 {
542 pci_unregister_driver(&com20020pci_driver);
543 }
544
545 module_init(com20020pci_init)
546 module_exit(com20020pci_cleanup)