drivers/net/can/sja1000/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 menuconfig CAN_SJA1000
   3         tristate "Philips/NXP SJA1000 devices"
   4         depends on HAS_IOMEM
   5
   6 if CAN_SJA1000
   7
   8 config CAN_SJA1000_ISA
   9         tristate "ISA Bus based legacy SJA1000 driver"
  10         ---help---
  11           This driver adds legacy support for SJA1000 chips connected to
  12           the ISA bus using I/O port, memory mapped or indirect access.
  13
  14 config CAN_SJA1000_PLATFORM
  15         tristate "Generic Platform Bus based SJA1000 driver"
  16         ---help---
  17           This driver adds support for the SJA1000 chips connected to
  18           the "platform bus" (Linux abstraction for directly to the
  19           processor attached devices).  Which can be found on various
  20           boards from Phytec (http://www.phytec.de) like the PCM027,
  21           PCM038. It also provides the OpenFirmware "platform bus" found
  22           on embedded systems with OpenFirmware bindings, e.g. if you
  23           have a PowerPC based system you may want to enable this option.
  24
  25 config CAN_EMS_PCMCIA
  26         tristate "EMS CPC-CARD Card"
  27         depends on PCMCIA
  28         ---help---
  29           This driver is for the one or two channel CPC-CARD cards from
  30           EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
  31
  32 config CAN_EMS_PCI
  33         tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
  34         depends on PCI
  35         ---help---
  36           This driver is for the one, two or four channel CPC-PCI,
  37           CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
  38           (http://www.ems-wuensche.de).
  39
  40 config CAN_PEAK_PCMCIA
  41         tristate "PEAK PCAN-PC Card"
  42         depends on PCMCIA
  43         depends on HAS_IOPORT_MAP
  44         ---help---
  45           This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
  46           from PEAK-System (http://www.peak-system.com). To compile this
  47           driver as a module, choose M here: the module will be called
  48           peak_pcmcia.
  49
  50 config CAN_PEAK_PCI
  51         tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
  52         depends on PCI
  53         ---help---
  54           This driver is for the PCAN-PCI/PCIe/miniPCI cards
  55           (1, 2, 3 or 4 channels) from PEAK-System Technik
  56           (http://www.peak-system.com).
  57
  58 config CAN_PEAK_PCIEC
  59         bool "PEAK PCAN-ExpressCard Cards"
  60         depends on CAN_PEAK_PCI
  61         select I2C
  62         select I2C_ALGOBIT
  63         default y
  64         ---help---
  65           Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
  66           Technik. This will also automatically select I2C and I2C_ALGO
  67           configuration options.
  68
  69 config CAN_KVASER_PCI
  70         tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
  71         depends on PCI
  72         ---help---
  73           This driver is for the PCIcanx and PCIcan cards (1, 2 or
  74           4 channel) from Kvaser (http://www.kvaser.com).
  75
  76 config CAN_PLX_PCI
  77         tristate "PLX90xx PCI-bridge based Cards"
  78         depends on PCI
  79         ---help---
  80           This driver is for CAN interface cards based on
  81           the PLX90xx PCI bridge.
  82           Driver supports now:
  83            - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
  84            - Adlink PCI-7841/cPCI-7841 SE card
  85            - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
  86            - esd CAN-PCI/PMC/266
  87            - esd CAN-PCIe/2000
  88            - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
  89            - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
  90            - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
  91            - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
  92            - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)
  93
  94 config CAN_TSCAN1
  95         tristate "TS-CAN1 PC104 boards"
  96         depends on ISA
  97         help
  98           This driver is for Technologic Systems' TSCAN-1 PC104 boards.
  99           http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
 100           The driver supports multiple boards and automatically configures them:
 101           PLD IO base addresses are read from jumpers JP1 and JP2,
 102           IRQ numbers are read from jumpers JP4 and JP5,
 103           SJA1000 IO base addresses are chosen heuristically (first that works).
 104
 105 endif