]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/net/can/sja1000/peak_pci.c
projects / mirror_ubuntu-artful-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
can: peak_pci: add PCI ID definition pcie card variant
[mirror_ubuntu-artful-kernel.git] / drivers / net / can / sja1000 / peak_pci.c
1 /*
2 * Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com>
3 * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com>
4 *
5 * Derived from the PCAN project file driver/src/pcan_pci.c:
6 *
7 * Copyright (C) 2001-2006 PEAK System-Technik GmbH
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the version 2 of the GNU General Public License
11 * as published by the Free Software Foundation
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 */
18
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/interrupt.h>
22 #include <linux/netdevice.h>
23 #include <linux/delay.h>
24 #include <linux/pci.h>
25 #include <linux/io.h>
26 #include <linux/i2c.h>
27 #include <linux/i2c-algo-bit.h>
28 #include <linux/can.h>
29 #include <linux/can/dev.h>
30
31 #include "sja1000.h"
32
33 MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>");
34 MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards");
35 MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards");
36 MODULE_SUPPORTED_DEVICE("PEAK PCAN miniPCIe/cPCI PC/104+ PCI/104e CAN Cards");
37 MODULE_LICENSE("GPL v2");
38
39 #define DRV_NAME "peak_pci"
40
41 struct peak_pciec_card;
42 struct peak_pci_chan {
43 void __iomem *cfg_base; /* Common for all channels */
44 struct net_device *prev_dev; /* Chain of network devices */
45 u16 icr_mask; /* Interrupt mask for fast ack */
46 struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */
47 };
48
49 #define PEAK_PCI_CAN_CLOCK (16000000 / 2)
50
51 #define PEAK_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK)
52 #define PEAK_PCI_OCR OCR_TX0_PUSHPULL
53
54 /*
55 * Important PITA registers
56 */
57 #define PITA_ICR 0x00 /* Interrupt control register */
58 #define PITA_GPIOICR 0x18 /* GPIO interface control register */
59 #define PITA_MISC 0x1C /* Miscellaneous register */
60
61 #define PEAK_PCI_CFG_SIZE 0x1000 /* Size of the config PCI bar */
62 #define PEAK_PCI_CHAN_SIZE 0x0400 /* Size used by the channel */
63
64 #define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */
65 #define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */
66 #define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */
67 #define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */
68 #define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */
69 #define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */
70 #define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */
71 #define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */
72 #define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */
73 #define PEAK_PCIE_OEM_ID 0x0009 /* PCAN-PCI Express OEM */
74 #define PEAK_PCIEC34_DEVICE_ID 0x000A /* PCAN-PCI Express 34 (one channel) */
75
76 #define PEAK_PCI_CHAN_MAX 4
77
78 static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = {
79 0x02, 0x01, 0x40, 0x80
80 };
81
82 static const struct pci_device_id peak_pci_tbl[] = {
83 {PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
84 {PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
85 {PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
86 {PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
87 {PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
88 {PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
89 {PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
90 #ifdef CONFIG_CAN_PEAK_PCIEC
91 {PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
92 {PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
93 #endif
94 {0,}
95 };
96
97 MODULE_DEVICE_TABLE(pci, peak_pci_tbl);
98
99 #ifdef CONFIG_CAN_PEAK_PCIEC
100 /*
101 * PCAN-ExpressCard needs I2C bit-banging configuration option.
102 */
103
104 /* GPIOICR byte access offsets */
105 #define PITA_GPOUT 0x18 /* GPx output value */
106 #define PITA_GPIN 0x19 /* GPx input value */
107 #define PITA_GPOEN 0x1A /* configure GPx as ouput pin */
108
109 /* I2C GP bits */
110 #define PITA_GPIN_SCL 0x01 /* Serial Clock Line */
111 #define PITA_GPIN_SDA 0x04 /* Serial DAta line */
112
113 #define PCA9553_1_SLAVEADDR (0xC4 >> 1)
114
115 /* PCA9553 LS0 fields values */
116 enum {
117 PCA9553_LOW,
118 PCA9553_HIGHZ,
119 PCA9553_PWM0,
120 PCA9553_PWM1
121 };
122
123 /* LEDs control */
124 #define PCA9553_ON PCA9553_LOW
125 #define PCA9553_OFF PCA9553_HIGHZ
126 #define PCA9553_SLOW PCA9553_PWM0
127 #define PCA9553_FAST PCA9553_PWM1
128
129 #define PCA9553_LED(c) (1 << (c))
130 #define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1))
131
132 #define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c)
133 #define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c)
134 #define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c)
135 #define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c)
136 #define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c)
137
138 #define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1))
139
140 #define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */
141
142 struct peak_pciec_chan {
143 struct net_device *netdev;
144 unsigned long prev_rx_bytes;
145 unsigned long prev_tx_bytes;
146 };
147
148 struct peak_pciec_card {
149 void __iomem *cfg_base; /* Common for all channels */
150 void __iomem *reg_base; /* first channel base address */
151 u8 led_cache; /* leds state cache */
152
153 /* PCIExpressCard i2c data */
154 struct i2c_algo_bit_data i2c_bit;
155 struct i2c_adapter led_chip;
156 struct delayed_work led_work; /* led delayed work */
157 int chan_count;
158 struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX];
159 };
160
161 /* "normal" pci register write callback is overloaded for leds control */
162 static void peak_pci_write_reg(const struct sja1000_priv *priv,
163 int port, u8 val);
164
165 static inline void pita_set_scl_highz(struct peak_pciec_card *card)
166 {
167 u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL;
168 writeb(gp_outen, card->cfg_base + PITA_GPOEN);
169 }
170
171 static inline void pita_set_sda_highz(struct peak_pciec_card *card)
172 {
173 u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA;
174 writeb(gp_outen, card->cfg_base + PITA_GPOEN);
175 }
176
177 static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card)
178 {
179 /* raise SCL & SDA GPIOs to high-Z */
180 pita_set_scl_highz(card);
181 pita_set_sda_highz(card);
182 }
183
184 static void pita_setsda(void *data, int state)
185 {
186 struct peak_pciec_card *card = (struct peak_pciec_card *)data;
187 u8 gp_out, gp_outen;
188
189 /* set output sda always to 0 */
190 gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA;
191 writeb(gp_out, card->cfg_base + PITA_GPOUT);
192
193 /* control output sda with GPOEN */
194 gp_outen = readb(card->cfg_base + PITA_GPOEN);
195 if (state)
196 gp_outen &= ~PITA_GPIN_SDA;
197 else
198 gp_outen |= PITA_GPIN_SDA;
199
200 writeb(gp_outen, card->cfg_base + PITA_GPOEN);
201 }
202
203 static void pita_setscl(void *data, int state)
204 {
205 struct peak_pciec_card *card = (struct peak_pciec_card *)data;
206 u8 gp_out, gp_outen;
207
208 /* set output scl always to 0 */
209 gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL;
210 writeb(gp_out, card->cfg_base + PITA_GPOUT);
211
212 /* control output scl with GPOEN */
213 gp_outen = readb(card->cfg_base + PITA_GPOEN);
214 if (state)
215 gp_outen &= ~PITA_GPIN_SCL;
216 else
217 gp_outen |= PITA_GPIN_SCL;
218
219 writeb(gp_outen, card->cfg_base + PITA_GPOEN);
220 }
221
222 static int pita_getsda(void *data)
223 {
224 struct peak_pciec_card *card = (struct peak_pciec_card *)data;
225
226 /* set tristate */
227 pita_set_sda_highz(card);
228
229 return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0;
230 }
231
232 static int pita_getscl(void *data)
233 {
234 struct peak_pciec_card *card = (struct peak_pciec_card *)data;
235
236 /* set tristate */
237 pita_set_scl_highz(card);
238
239 return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0;
240 }
241
242 /*
243 * write commands to the LED chip though the I2C-bus of the PCAN-PCIeC
244 */
245 static int peak_pciec_write_pca9553(struct peak_pciec_card *card,
246 u8 offset, u8 data)
247 {
248 u8 buffer[2] = {
249 offset,
250 data
251 };
252 struct i2c_msg msg = {
253 .addr = PCA9553_1_SLAVEADDR,
254 .len = 2,
255 .buf = buffer,
256 };
257 int ret;
258
259 /* cache led mask */
260 if ((offset == 5) && (data == card->led_cache))
261 return 0;
262
263 ret = i2c_transfer(&card->led_chip, &msg, 1);
264 if (ret < 0)
265 return ret;
266
267 if (offset == 5)
268 card->led_cache = data;
269
270 return 0;
271 }
272
273 /*
274 * delayed work callback used to control the LEDs
275 */
276 static void peak_pciec_led_work(struct work_struct *work)
277 {
278 struct peak_pciec_card *card =
279 container_of(work, struct peak_pciec_card, led_work.work);
280 struct net_device *netdev;
281 u8 new_led = card->led_cache;
282 int i, up_count = 0;
283
284 /* first check what is to do */
285 for (i = 0; i < card->chan_count; i++) {
286 /* default is: not configured */
287 new_led &= ~PCA9553_LED_MASK(i);
288 new_led |= PCA9553_LED_ON(i);
289
290 netdev = card->channel[i].netdev;
291 if (!netdev || !(netdev->flags & IFF_UP))
292 continue;
293
294 up_count++;
295
296 /* no activity (but configured) */
297 new_led &= ~PCA9553_LED_MASK(i);
298 new_led |= PCA9553_LED_SLOW(i);
299
300 /* if bytes counters changed, set fast blinking led */
301 if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) {
302 card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes;
303 new_led &= ~PCA9553_LED_MASK(i);
304 new_led |= PCA9553_LED_FAST(i);
305 }
306 if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) {
307 card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes;
308 new_led &= ~PCA9553_LED_MASK(i);
309 new_led |= PCA9553_LED_FAST(i);
310 }
311 }
312
313 /* check if LS0 settings changed, only update i2c if so */
314 peak_pciec_write_pca9553(card, 5, new_led);
315
316 /* restart timer (except if no more configured channels) */
317 if (up_count)
318 schedule_delayed_work(&card->led_work, HZ);
319 }
320
321 /*
322 * set LEDs blinking state
323 */
324 static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s)
325 {
326 u8 new_led = card->led_cache;
327 int i;
328
329 /* first check what is to do */
330 for (i = 0; i < card->chan_count; i++)
331 if (led_mask & PCA9553_LED(i)) {
332 new_led &= ~PCA9553_LED_MASK(i);
333 new_led |= PCA9553_LED_STATE(s, i);
334 }
335
336 /* check if LS0 settings changed, only update i2c if so */
337 peak_pciec_write_pca9553(card, 5, new_led);
338 }
339
340 /*
341 * start one second delayed work to control LEDs
342 */
343 static void peak_pciec_start_led_work(struct peak_pciec_card *card)
344 {
345 schedule_delayed_work(&card->led_work, HZ);
346 }
347
348 /*
349 * stop LEDs delayed work
350 */
351 static void peak_pciec_stop_led_work(struct peak_pciec_card *card)
352 {
353 cancel_delayed_work_sync(&card->led_work);
354 }
355
356 /*
357 * initialize the PCA9553 4-bit I2C-bus LED chip
358 */
359 static int peak_pciec_init_leds(struct peak_pciec_card *card)
360 {
361 int err;
362
363 /* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */
364 err = peak_pciec_write_pca9553(card, 1, 44 / 1);
365 if (err)
366 return err;
367
368 /* duty cycle 0: 50% */
369 err = peak_pciec_write_pca9553(card, 2, 0x80);
370 if (err)
371 return err;
372
373 /* prescaler for frequency 1: "FAST" = 5 Hz */
374 err = peak_pciec_write_pca9553(card, 3, 44 / 5);
375 if (err)
376 return err;
377
378 /* duty cycle 1: 50% */
379 err = peak_pciec_write_pca9553(card, 4, 0x80);
380 if (err)
381 return err;
382
383 /* switch LEDs to initial state */
384 return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT);
385 }
386
387 /*
388 * restore LEDs state to off peak_pciec_leds_exit
389 */
390 static void peak_pciec_leds_exit(struct peak_pciec_card *card)
391 {
392 /* switch LEDs to off */
393 peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL);
394 }
395
396 /*
397 * normal write sja1000 register method overloaded to catch when controller
398 * is started or stopped, to control leds
399 */
400 static void peak_pciec_write_reg(const struct sja1000_priv *priv,
401 int port, u8 val)
402 {
403 struct peak_pci_chan *chan = priv->priv;
404 struct peak_pciec_card *card = chan->pciec_card;
405 int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE;
406
407 /* sja1000 register changes control the leds state */
408 if (port == SJA1000_MOD)
409 switch (val) {
410 case MOD_RM:
411 /* Reset Mode: set led on */
412 peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON);
413 break;
414 case 0x00:
415 /* Normal Mode: led slow blinking and start led timer */
416 peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW);
417 peak_pciec_start_led_work(card);
418 break;
419 default:
420 break;
421 }
422
423 /* call base function */
424 peak_pci_write_reg(priv, port, val);
425 }
426
427 static struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = {
428 .setsda = pita_setsda,
429 .setscl = pita_setscl,
430 .getsda = pita_getsda,
431 .getscl = pita_getscl,
432 .udelay = 10,
433 .timeout = HZ,
434 };
435
436 static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev)
437 {
438 struct sja1000_priv *priv = netdev_priv(dev);
439 struct peak_pci_chan *chan = priv->priv;
440 struct peak_pciec_card *card;
441 int err;
442
443 /* copy i2c object address from 1st channel */
444 if (chan->prev_dev) {
445 struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev);
446 struct peak_pci_chan *prev_chan = prev_priv->priv;
447
448 card = prev_chan->pciec_card;
449 if (!card)
450 return -ENODEV;
451
452 /* channel is the first one: do the init part */
453 } else {
454 /* create the bit banging I2C adapter structure */
455 card = kzalloc(sizeof(struct peak_pciec_card), GFP_KERNEL);
456 if (!card)
457 return -ENOMEM;
458
459 card->cfg_base = chan->cfg_base;
460 card->reg_base = priv->reg_base;
461
462 card->led_chip.owner = THIS_MODULE;
463 card->led_chip.dev.parent = &pdev->dev;
464 card->led_chip.algo_data = &card->i2c_bit;
465 strncpy(card->led_chip.name, "peak_i2c",
466 sizeof(card->led_chip.name));
467
468 card->i2c_bit = peak_pciec_i2c_bit_ops;
469 card->i2c_bit.udelay = 10;
470 card->i2c_bit.timeout = HZ;
471 card->i2c_bit.data = card;
472
473 peak_pciec_init_pita_gpio(card);
474
475 err = i2c_bit_add_bus(&card->led_chip);
476 if (err) {
477 dev_err(&pdev->dev, "i2c init failed\n");
478 goto pciec_init_err_1;
479 }
480
481 err = peak_pciec_init_leds(card);
482 if (err) {
483 dev_err(&pdev->dev, "leds hardware init failed\n");
484 goto pciec_init_err_2;
485 }
486
487 INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work);
488 /* PCAN-ExpressCard needs its own callback for leds */
489 priv->write_reg = peak_pciec_write_reg;
490 }
491
492 chan->pciec_card = card;
493 card->channel[card->chan_count++].netdev = dev;
494
495 return 0;
496
497 pciec_init_err_2:
498 i2c_del_adapter(&card->led_chip);
499
500 pciec_init_err_1:
501 peak_pciec_init_pita_gpio(card);
502 kfree(card);
503
504 return err;
505 }
506
507 static void peak_pciec_remove(struct peak_pciec_card *card)
508 {
509 peak_pciec_stop_led_work(card);
510 peak_pciec_leds_exit(card);
511 i2c_del_adapter(&card->led_chip);
512 peak_pciec_init_pita_gpio(card);
513 kfree(card);
514 }
515
516 #else /* CONFIG_CAN_PEAK_PCIEC */
517
518 /*
519 * Placebo functions when PCAN-ExpressCard support is not selected
520 */
521 static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev)
522 {
523 return -ENODEV;
524 }
525
526 static inline void peak_pciec_remove(struct peak_pciec_card *card)
527 {
528 }
529 #endif /* CONFIG_CAN_PEAK_PCIEC */
530
531 static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port)
532 {
533 return readb(priv->reg_base + (port << 2));
534 }
535
536 static void peak_pci_write_reg(const struct sja1000_priv *priv,
537 int port, u8 val)
538 {
539 writeb(val, priv->reg_base + (port << 2));
540 }
541
542 static void peak_pci_post_irq(const struct sja1000_priv *priv)
543 {
544 struct peak_pci_chan *chan = priv->priv;
545 u16 icr;
546
547 /* Select and clear in PITA stored interrupt */
548 icr = readw(chan->cfg_base + PITA_ICR);
549 if (icr & chan->icr_mask)
550 writew(chan->icr_mask, chan->cfg_base + PITA_ICR);
551 }
552
553 static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
554 {
555 struct sja1000_priv *priv;
556 struct peak_pci_chan *chan;
557 struct net_device *dev, *prev_dev;
558 void __iomem *cfg_base, *reg_base;
559 u16 sub_sys_id, icr;
560 int i, err, channels;
561
562 err = pci_enable_device(pdev);
563 if (err)
564 return err;
565
566 err = pci_request_regions(pdev, DRV_NAME);
567 if (err)
568 goto failure_disable_pci;
569
570 err = pci_read_config_word(pdev, 0x2e, &sub_sys_id);
571 if (err)
572 goto failure_release_regions;
573
574 dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n",
575 pdev->vendor, pdev->device, sub_sys_id);
576
577 err = pci_write_config_word(pdev, 0x44, 0);
578 if (err)
579 goto failure_release_regions;
580
581 if (sub_sys_id >= 12)
582 channels = 4;
583 else if (sub_sys_id >= 10)
584 channels = 3;
585 else if (sub_sys_id >= 4)
586 channels = 2;
587 else
588 channels = 1;
589
590 cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE);
591 if (!cfg_base) {
592 dev_err(&pdev->dev, "failed to map PCI resource #0\n");
593 err = -ENOMEM;
594 goto failure_release_regions;
595 }
596
597 reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels);
598 if (!reg_base) {
599 dev_err(&pdev->dev, "failed to map PCI resource #1\n");
600 err = -ENOMEM;
601 goto failure_unmap_cfg_base;
602 }
603
604 /* Set GPIO control register */
605 writew(0x0005, cfg_base + PITA_GPIOICR + 2);
606 /* Enable all channels of this card */
607 writeb(0x00, cfg_base + PITA_GPIOICR);
608 /* Toggle reset */
609 writeb(0x05, cfg_base + PITA_MISC + 3);
610 mdelay(5);
611 /* Leave parport mux mode */
612 writeb(0x04, cfg_base + PITA_MISC + 3);
613
614 icr = readw(cfg_base + PITA_ICR + 2);
615
616 for (i = 0; i < channels; i++) {
617 dev = alloc_sja1000dev(sizeof(struct peak_pci_chan));
618 if (!dev) {
619 err = -ENOMEM;
620 goto failure_remove_channels;
621 }
622
623 priv = netdev_priv(dev);
624 chan = priv->priv;
625
626 chan->cfg_base = cfg_base;
627 priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE;
628
629 priv->read_reg = peak_pci_read_reg;
630 priv->write_reg = peak_pci_write_reg;
631 priv->post_irq = peak_pci_post_irq;
632
633 priv->can.clock.freq = PEAK_PCI_CAN_CLOCK;
634 priv->ocr = PEAK_PCI_OCR;
635 priv->cdr = PEAK_PCI_CDR;
636 /* Neither a slave nor a single device distributes the clock */
637 if (channels == 1 || i > 0)
638 priv->cdr |= CDR_CLK_OFF;
639
640 /* Setup interrupt handling */
641 priv->irq_flags = IRQF_SHARED;
642 dev->irq = pdev->irq;
643
644 chan->icr_mask = peak_pci_icr_masks[i];
645 icr |= chan->icr_mask;
646
647 SET_NETDEV_DEV(dev, &pdev->dev);
648 dev->dev_id = i;
649
650 /* Create chain of SJA1000 devices */
651 chan->prev_dev = pci_get_drvdata(pdev);
652 pci_set_drvdata(pdev, dev);
653
654 /*
655 * PCAN-ExpressCard needs some additional i2c init.
656 * This must be done *before* register_sja1000dev() but
657 * *after* devices linkage
658 */
659 if (pdev->device == PEAK_PCIEC_DEVICE_ID ||
660 pdev->device == PEAK_PCIEC34_DEVICE_ID) {
661 err = peak_pciec_probe(pdev, dev);
662 if (err) {
663 dev_err(&pdev->dev,
664 "failed to probe device (err %d)\n",
665 err);
666 goto failure_free_dev;
667 }
668 }
669
670 err = register_sja1000dev(dev);
671 if (err) {
672 dev_err(&pdev->dev, "failed to register device\n");
673 goto failure_free_dev;
674 }
675
676 dev_info(&pdev->dev,
677 "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n",
678 dev->name, priv->reg_base, chan->cfg_base, dev->irq);
679 }
680
681 /* Enable interrupts */
682 writew(icr, cfg_base + PITA_ICR + 2);
683
684 return 0;
685
686 failure_free_dev:
687 pci_set_drvdata(pdev, chan->prev_dev);
688 free_sja1000dev(dev);
689
690 failure_remove_channels:
691 /* Disable interrupts */
692 writew(0x0, cfg_base + PITA_ICR + 2);
693
694 chan = NULL;
695 for (dev = pci_get_drvdata(pdev); dev; dev = prev_dev) {
696 priv = netdev_priv(dev);
697 chan = priv->priv;
698 prev_dev = chan->prev_dev;
699
700 unregister_sja1000dev(dev);
701 free_sja1000dev(dev);
702 }
703
704 /* free any PCIeC resources too */
705 if (chan && chan->pciec_card)
706 peak_pciec_remove(chan->pciec_card);
707
708 pci_iounmap(pdev, reg_base);
709
710 failure_unmap_cfg_base:
711 pci_iounmap(pdev, cfg_base);
712
713 failure_release_regions:
714 pci_release_regions(pdev);
715
716 failure_disable_pci:
717 pci_disable_device(pdev);
718
719 return err;
720 }
721
722 static void peak_pci_remove(struct pci_dev *pdev)
723 {
724 struct net_device *dev = pci_get_drvdata(pdev); /* Last device */
725 struct sja1000_priv *priv = netdev_priv(dev);
726 struct peak_pci_chan *chan = priv->priv;
727 void __iomem *cfg_base = chan->cfg_base;
728 void __iomem *reg_base = priv->reg_base;
729
730 /* Disable interrupts */
731 writew(0x0, cfg_base + PITA_ICR + 2);
732
733 /* Loop over all registered devices */
734 while (1) {
735 struct net_device *prev_dev = chan->prev_dev;
736
737 dev_info(&pdev->dev, "removing device %s\n", dev->name);
738 unregister_sja1000dev(dev);
739 free_sja1000dev(dev);
740 dev = prev_dev;
741
742 if (!dev) {
743 /* do that only for first channel */
744 if (chan->pciec_card)
745 peak_pciec_remove(chan->pciec_card);
746 break;
747 }
748 priv = netdev_priv(dev);
749 chan = priv->priv;
750 }
751
752 pci_iounmap(pdev, reg_base);
753 pci_iounmap(pdev, cfg_base);
754 pci_release_regions(pdev);
755 pci_disable_device(pdev);
756 }
757
758 static struct pci_driver peak_pci_driver = {
759 .name = DRV_NAME,
760 .id_table = peak_pci_tbl,
761 .probe = peak_pci_probe,
762 .remove = peak_pci_remove,
763 };
764
765 module_pci_driver(peak_pci_driver);
Ubuntu Artful kernel mirror