1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 #include <net/ip6_checksum.h>
32 char e1000_driver_name
[] = "e1000";
33 static char e1000_driver_string
[] = "Intel(R) PRO/1000 Network Driver";
34 #define DRV_VERSION "7.3.21-k6-NAPI"
35 const char e1000_driver_version
[] = DRV_VERSION
;
36 static const char e1000_copyright
[] = "Copyright (c) 1999-2006 Intel Corporation.";
38 /* e1000_pci_tbl - PCI Device ID Table
40 * Last entry must be all 0s
43 * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
45 static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl
) = {
46 INTEL_E1000_ETHERNET_DEVICE(0x1000),
47 INTEL_E1000_ETHERNET_DEVICE(0x1001),
48 INTEL_E1000_ETHERNET_DEVICE(0x1004),
49 INTEL_E1000_ETHERNET_DEVICE(0x1008),
50 INTEL_E1000_ETHERNET_DEVICE(0x1009),
51 INTEL_E1000_ETHERNET_DEVICE(0x100C),
52 INTEL_E1000_ETHERNET_DEVICE(0x100D),
53 INTEL_E1000_ETHERNET_DEVICE(0x100E),
54 INTEL_E1000_ETHERNET_DEVICE(0x100F),
55 INTEL_E1000_ETHERNET_DEVICE(0x1010),
56 INTEL_E1000_ETHERNET_DEVICE(0x1011),
57 INTEL_E1000_ETHERNET_DEVICE(0x1012),
58 INTEL_E1000_ETHERNET_DEVICE(0x1013),
59 INTEL_E1000_ETHERNET_DEVICE(0x1014),
60 INTEL_E1000_ETHERNET_DEVICE(0x1015),
61 INTEL_E1000_ETHERNET_DEVICE(0x1016),
62 INTEL_E1000_ETHERNET_DEVICE(0x1017),
63 INTEL_E1000_ETHERNET_DEVICE(0x1018),
64 INTEL_E1000_ETHERNET_DEVICE(0x1019),
65 INTEL_E1000_ETHERNET_DEVICE(0x101A),
66 INTEL_E1000_ETHERNET_DEVICE(0x101D),
67 INTEL_E1000_ETHERNET_DEVICE(0x101E),
68 INTEL_E1000_ETHERNET_DEVICE(0x1026),
69 INTEL_E1000_ETHERNET_DEVICE(0x1027),
70 INTEL_E1000_ETHERNET_DEVICE(0x1028),
71 INTEL_E1000_ETHERNET_DEVICE(0x1075),
72 INTEL_E1000_ETHERNET_DEVICE(0x1076),
73 INTEL_E1000_ETHERNET_DEVICE(0x1077),
74 INTEL_E1000_ETHERNET_DEVICE(0x1078),
75 INTEL_E1000_ETHERNET_DEVICE(0x1079),
76 INTEL_E1000_ETHERNET_DEVICE(0x107A),
77 INTEL_E1000_ETHERNET_DEVICE(0x107B),
78 INTEL_E1000_ETHERNET_DEVICE(0x107C),
79 INTEL_E1000_ETHERNET_DEVICE(0x108A),
80 INTEL_E1000_ETHERNET_DEVICE(0x1099),
81 INTEL_E1000_ETHERNET_DEVICE(0x10B5),
82 /* required last entry */
86 MODULE_DEVICE_TABLE(pci
, e1000_pci_tbl
);
88 int e1000_up(struct e1000_adapter
*adapter
);
89 void e1000_down(struct e1000_adapter
*adapter
);
90 void e1000_reinit_locked(struct e1000_adapter
*adapter
);
91 void e1000_reset(struct e1000_adapter
*adapter
);
92 int e1000_set_spd_dplx(struct e1000_adapter
*adapter
, u16 spddplx
);
93 int e1000_setup_all_tx_resources(struct e1000_adapter
*adapter
);
94 int e1000_setup_all_rx_resources(struct e1000_adapter
*adapter
);
95 void e1000_free_all_tx_resources(struct e1000_adapter
*adapter
);
96 void e1000_free_all_rx_resources(struct e1000_adapter
*adapter
);
97 static int e1000_setup_tx_resources(struct e1000_adapter
*adapter
,
98 struct e1000_tx_ring
*txdr
);
99 static int e1000_setup_rx_resources(struct e1000_adapter
*adapter
,
100 struct e1000_rx_ring
*rxdr
);
101 static void e1000_free_tx_resources(struct e1000_adapter
*adapter
,
102 struct e1000_tx_ring
*tx_ring
);
103 static void e1000_free_rx_resources(struct e1000_adapter
*adapter
,
104 struct e1000_rx_ring
*rx_ring
);
105 void e1000_update_stats(struct e1000_adapter
*adapter
);
107 static int e1000_init_module(void);
108 static void e1000_exit_module(void);
109 static int e1000_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
110 static void __devexit
e1000_remove(struct pci_dev
*pdev
);
111 static int e1000_alloc_queues(struct e1000_adapter
*adapter
);
112 static int e1000_sw_init(struct e1000_adapter
*adapter
);
113 static int e1000_open(struct net_device
*netdev
);
114 static int e1000_close(struct net_device
*netdev
);
115 static void e1000_configure_tx(struct e1000_adapter
*adapter
);
116 static void e1000_configure_rx(struct e1000_adapter
*adapter
);
117 static void e1000_setup_rctl(struct e1000_adapter
*adapter
);
118 static void e1000_clean_all_tx_rings(struct e1000_adapter
*adapter
);
119 static void e1000_clean_all_rx_rings(struct e1000_adapter
*adapter
);
120 static void e1000_clean_tx_ring(struct e1000_adapter
*adapter
,
121 struct e1000_tx_ring
*tx_ring
);
122 static void e1000_clean_rx_ring(struct e1000_adapter
*adapter
,
123 struct e1000_rx_ring
*rx_ring
);
124 static void e1000_set_rx_mode(struct net_device
*netdev
);
125 static void e1000_update_phy_info(unsigned long data
);
126 static void e1000_watchdog(unsigned long data
);
127 static void e1000_82547_tx_fifo_stall(unsigned long data
);
128 static netdev_tx_t
e1000_xmit_frame(struct sk_buff
*skb
,
129 struct net_device
*netdev
);
130 static struct net_device_stats
* e1000_get_stats(struct net_device
*netdev
);
131 static int e1000_change_mtu(struct net_device
*netdev
, int new_mtu
);
132 static int e1000_set_mac(struct net_device
*netdev
, void *p
);
133 static irqreturn_t
e1000_intr(int irq
, void *data
);
134 static bool e1000_clean_tx_irq(struct e1000_adapter
*adapter
,
135 struct e1000_tx_ring
*tx_ring
);
136 static int e1000_clean(struct napi_struct
*napi
, int budget
);
137 static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter
,
138 struct e1000_rx_ring
*rx_ring
,
139 int *work_done
, int work_to_do
);
140 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter
*adapter
,
141 struct e1000_rx_ring
*rx_ring
,
142 int *work_done
, int work_to_do
);
143 static void e1000_alloc_rx_buffers(struct e1000_adapter
*adapter
,
144 struct e1000_rx_ring
*rx_ring
,
146 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter
*adapter
,
147 struct e1000_rx_ring
*rx_ring
,
149 static int e1000_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
);
150 static int e1000_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
,
152 static void e1000_enter_82542_rst(struct e1000_adapter
*adapter
);
153 static void e1000_leave_82542_rst(struct e1000_adapter
*adapter
);
154 static void e1000_tx_timeout(struct net_device
*dev
);
155 static void e1000_reset_task(struct work_struct
*work
);
156 static void e1000_smartspeed(struct e1000_adapter
*adapter
);
157 static int e1000_82547_fifo_workaround(struct e1000_adapter
*adapter
,
158 struct sk_buff
*skb
);
160 static void e1000_vlan_rx_register(struct net_device
*netdev
, struct vlan_group
*grp
);
161 static void e1000_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
);
162 static void e1000_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
);
163 static void e1000_restore_vlan(struct e1000_adapter
*adapter
);
166 static int e1000_suspend(struct pci_dev
*pdev
, pm_message_t state
);
167 static int e1000_resume(struct pci_dev
*pdev
);
169 static void e1000_shutdown(struct pci_dev
*pdev
);
171 #ifdef CONFIG_NET_POLL_CONTROLLER
172 /* for netdump / net console */
173 static void e1000_netpoll (struct net_device
*netdev
);
176 #define COPYBREAK_DEFAULT 256
177 static unsigned int copybreak __read_mostly
= COPYBREAK_DEFAULT
;
178 module_param(copybreak
, uint
, 0644);
179 MODULE_PARM_DESC(copybreak
,
180 "Maximum size of packet that is copied to a new buffer on receive");
182 static pci_ers_result_t
e1000_io_error_detected(struct pci_dev
*pdev
,
183 pci_channel_state_t state
);
184 static pci_ers_result_t
e1000_io_slot_reset(struct pci_dev
*pdev
);
185 static void e1000_io_resume(struct pci_dev
*pdev
);
187 static struct pci_error_handlers e1000_err_handler
= {
188 .error_detected
= e1000_io_error_detected
,
189 .slot_reset
= e1000_io_slot_reset
,
190 .resume
= e1000_io_resume
,
193 static struct pci_driver e1000_driver
= {
194 .name
= e1000_driver_name
,
195 .id_table
= e1000_pci_tbl
,
196 .probe
= e1000_probe
,
197 .remove
= __devexit_p(e1000_remove
),
199 /* Power Managment Hooks */
200 .suspend
= e1000_suspend
,
201 .resume
= e1000_resume
,
203 .shutdown
= e1000_shutdown
,
204 .err_handler
= &e1000_err_handler
207 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
208 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
209 MODULE_LICENSE("GPL");
210 MODULE_VERSION(DRV_VERSION
);
212 static int debug
= NETIF_MSG_DRV
| NETIF_MSG_PROBE
;
213 module_param(debug
, int, 0);
214 MODULE_PARM_DESC(debug
, "Debug level (0=none,...,16=all)");
217 * e1000_get_hw_dev - return device
218 * used by hardware layer to print debugging information
221 struct net_device
*e1000_get_hw_dev(struct e1000_hw
*hw
)
223 struct e1000_adapter
*adapter
= hw
->back
;
224 return adapter
->netdev
;
228 * e1000_init_module - Driver Registration Routine
230 * e1000_init_module is the first routine called when the driver is
231 * loaded. All it does is register with the PCI subsystem.
234 static int __init
e1000_init_module(void)
237 pr_info("%s - version %s\n", e1000_driver_string
, e1000_driver_version
);
239 pr_info("%s\n", e1000_copyright
);
241 ret
= pci_register_driver(&e1000_driver
);
242 if (copybreak
!= COPYBREAK_DEFAULT
) {
244 pr_info("copybreak disabled\n");
246 pr_info("copybreak enabled for "
247 "packets <= %u bytes\n", copybreak
);
252 module_init(e1000_init_module
);
255 * e1000_exit_module - Driver Exit Cleanup Routine
257 * e1000_exit_module is called just before the driver is removed
261 static void __exit
e1000_exit_module(void)
263 pci_unregister_driver(&e1000_driver
);
266 module_exit(e1000_exit_module
);
268 static int e1000_request_irq(struct e1000_adapter
*adapter
)
270 struct net_device
*netdev
= adapter
->netdev
;
271 irq_handler_t handler
= e1000_intr
;
272 int irq_flags
= IRQF_SHARED
;
275 err
= request_irq(adapter
->pdev
->irq
, handler
, irq_flags
, netdev
->name
,
278 e_err(probe
, "Unable to allocate interrupt Error: %d\n", err
);
284 static void e1000_free_irq(struct e1000_adapter
*adapter
)
286 struct net_device
*netdev
= adapter
->netdev
;
288 free_irq(adapter
->pdev
->irq
, netdev
);
292 * e1000_irq_disable - Mask off interrupt generation on the NIC
293 * @adapter: board private structure
296 static void e1000_irq_disable(struct e1000_adapter
*adapter
)
298 struct e1000_hw
*hw
= &adapter
->hw
;
302 synchronize_irq(adapter
->pdev
->irq
);
306 * e1000_irq_enable - Enable default interrupt generation settings
307 * @adapter: board private structure
310 static void e1000_irq_enable(struct e1000_adapter
*adapter
)
312 struct e1000_hw
*hw
= &adapter
->hw
;
314 ew32(IMS
, IMS_ENABLE_MASK
);
318 static void e1000_update_mng_vlan(struct e1000_adapter
*adapter
)
320 struct e1000_hw
*hw
= &adapter
->hw
;
321 struct net_device
*netdev
= adapter
->netdev
;
322 u16 vid
= hw
->mng_cookie
.vlan_id
;
323 u16 old_vid
= adapter
->mng_vlan_id
;
324 if (adapter
->vlgrp
) {
325 if (!vlan_group_get_device(adapter
->vlgrp
, vid
)) {
326 if (hw
->mng_cookie
.status
&
327 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) {
328 e1000_vlan_rx_add_vid(netdev
, vid
);
329 adapter
->mng_vlan_id
= vid
;
331 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
333 if ((old_vid
!= (u16
)E1000_MNG_VLAN_NONE
) &&
335 !vlan_group_get_device(adapter
->vlgrp
, old_vid
))
336 e1000_vlan_rx_kill_vid(netdev
, old_vid
);
338 adapter
->mng_vlan_id
= vid
;
342 static void e1000_init_manageability(struct e1000_adapter
*adapter
)
344 struct e1000_hw
*hw
= &adapter
->hw
;
346 if (adapter
->en_mng_pt
) {
347 u32 manc
= er32(MANC
);
349 /* disable hardware interception of ARP */
350 manc
&= ~(E1000_MANC_ARP_EN
);
356 static void e1000_release_manageability(struct e1000_adapter
*adapter
)
358 struct e1000_hw
*hw
= &adapter
->hw
;
360 if (adapter
->en_mng_pt
) {
361 u32 manc
= er32(MANC
);
363 /* re-enable hardware interception of ARP */
364 manc
|= E1000_MANC_ARP_EN
;
371 * e1000_configure - configure the hardware for RX and TX
372 * @adapter = private board structure
374 static void e1000_configure(struct e1000_adapter
*adapter
)
376 struct net_device
*netdev
= adapter
->netdev
;
379 e1000_set_rx_mode(netdev
);
381 e1000_restore_vlan(adapter
);
382 e1000_init_manageability(adapter
);
384 e1000_configure_tx(adapter
);
385 e1000_setup_rctl(adapter
);
386 e1000_configure_rx(adapter
);
387 /* call E1000_DESC_UNUSED which always leaves
388 * at least 1 descriptor unused to make sure
389 * next_to_use != next_to_clean */
390 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
391 struct e1000_rx_ring
*ring
= &adapter
->rx_ring
[i
];
392 adapter
->alloc_rx_buf(adapter
, ring
,
393 E1000_DESC_UNUSED(ring
));
397 int e1000_up(struct e1000_adapter
*adapter
)
399 struct e1000_hw
*hw
= &adapter
->hw
;
401 /* hardware has been reset, we need to reload some things */
402 e1000_configure(adapter
);
404 clear_bit(__E1000_DOWN
, &adapter
->flags
);
406 napi_enable(&adapter
->napi
);
408 e1000_irq_enable(adapter
);
410 netif_wake_queue(adapter
->netdev
);
412 /* fire a link change interrupt to start the watchdog */
413 ew32(ICS
, E1000_ICS_LSC
);
418 * e1000_power_up_phy - restore link in case the phy was powered down
419 * @adapter: address of board private structure
421 * The phy may be powered down to save power and turn off link when the
422 * driver is unloaded and wake on lan is not enabled (among others)
423 * *** this routine MUST be followed by a call to e1000_reset ***
427 void e1000_power_up_phy(struct e1000_adapter
*adapter
)
429 struct e1000_hw
*hw
= &adapter
->hw
;
432 /* Just clear the power down bit to wake the phy back up */
433 if (hw
->media_type
== e1000_media_type_copper
) {
434 /* according to the manual, the phy will retain its
435 * settings across a power-down/up cycle */
436 e1000_read_phy_reg(hw
, PHY_CTRL
, &mii_reg
);
437 mii_reg
&= ~MII_CR_POWER_DOWN
;
438 e1000_write_phy_reg(hw
, PHY_CTRL
, mii_reg
);
442 static void e1000_power_down_phy(struct e1000_adapter
*adapter
)
444 struct e1000_hw
*hw
= &adapter
->hw
;
446 /* Power down the PHY so no link is implied when interface is down *
447 * The PHY cannot be powered down if any of the following is true *
450 * (c) SoL/IDER session is active */
451 if (!adapter
->wol
&& hw
->mac_type
>= e1000_82540
&&
452 hw
->media_type
== e1000_media_type_copper
) {
455 switch (hw
->mac_type
) {
458 case e1000_82545_rev_3
:
460 case e1000_82546_rev_3
:
462 case e1000_82541_rev_2
:
464 case e1000_82547_rev_2
:
465 if (er32(MANC
) & E1000_MANC_SMBUS_EN
)
471 e1000_read_phy_reg(hw
, PHY_CTRL
, &mii_reg
);
472 mii_reg
|= MII_CR_POWER_DOWN
;
473 e1000_write_phy_reg(hw
, PHY_CTRL
, mii_reg
);
480 void e1000_down(struct e1000_adapter
*adapter
)
482 struct e1000_hw
*hw
= &adapter
->hw
;
483 struct net_device
*netdev
= adapter
->netdev
;
486 /* signal that we're down so the interrupt handler does not
487 * reschedule our watchdog timer */
488 set_bit(__E1000_DOWN
, &adapter
->flags
);
490 /* disable receives in the hardware */
492 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
493 /* flush and sleep below */
495 netif_tx_disable(netdev
);
497 /* disable transmits in the hardware */
499 tctl
&= ~E1000_TCTL_EN
;
501 /* flush both disables and wait for them to finish */
505 napi_disable(&adapter
->napi
);
507 e1000_irq_disable(adapter
);
509 del_timer_sync(&adapter
->tx_fifo_stall_timer
);
510 del_timer_sync(&adapter
->watchdog_timer
);
511 del_timer_sync(&adapter
->phy_info_timer
);
513 adapter
->link_speed
= 0;
514 adapter
->link_duplex
= 0;
515 netif_carrier_off(netdev
);
517 e1000_reset(adapter
);
518 e1000_clean_all_tx_rings(adapter
);
519 e1000_clean_all_rx_rings(adapter
);
522 void e1000_reinit_locked(struct e1000_adapter
*adapter
)
524 WARN_ON(in_interrupt());
525 while (test_and_set_bit(__E1000_RESETTING
, &adapter
->flags
))
529 clear_bit(__E1000_RESETTING
, &adapter
->flags
);
532 void e1000_reset(struct e1000_adapter
*adapter
)
534 struct e1000_hw
*hw
= &adapter
->hw
;
535 u32 pba
= 0, tx_space
, min_tx_space
, min_rx_space
;
536 bool legacy_pba_adjust
= false;
539 /* Repartition Pba for greater than 9k mtu
540 * To take effect CTRL.RST is required.
543 switch (hw
->mac_type
) {
544 case e1000_82542_rev2_0
:
545 case e1000_82542_rev2_1
:
550 case e1000_82541_rev_2
:
551 legacy_pba_adjust
= true;
555 case e1000_82545_rev_3
:
557 case e1000_82546_rev_3
:
561 case e1000_82547_rev_2
:
562 legacy_pba_adjust
= true;
565 case e1000_undefined
:
570 if (legacy_pba_adjust
) {
571 if (hw
->max_frame_size
> E1000_RXBUFFER_8192
)
572 pba
-= 8; /* allocate more FIFO for Tx */
574 if (hw
->mac_type
== e1000_82547
) {
575 adapter
->tx_fifo_head
= 0;
576 adapter
->tx_head_addr
= pba
<< E1000_TX_HEAD_ADDR_SHIFT
;
577 adapter
->tx_fifo_size
=
578 (E1000_PBA_40K
- pba
) << E1000_PBA_BYTES_SHIFT
;
579 atomic_set(&adapter
->tx_fifo_stall
, 0);
581 } else if (hw
->max_frame_size
> ETH_FRAME_LEN
+ ETH_FCS_LEN
) {
582 /* adjust PBA for jumbo frames */
585 /* To maintain wire speed transmits, the Tx FIFO should be
586 * large enough to accommodate two full transmit packets,
587 * rounded up to the next 1KB and expressed in KB. Likewise,
588 * the Rx FIFO should be large enough to accommodate at least
589 * one full receive packet and is similarly rounded up and
590 * expressed in KB. */
592 /* upper 16 bits has Tx packet buffer allocation size in KB */
593 tx_space
= pba
>> 16;
594 /* lower 16 bits has Rx packet buffer allocation size in KB */
597 * the tx fifo also stores 16 bytes of information about the tx
598 * but don't include ethernet FCS because hardware appends it
600 min_tx_space
= (hw
->max_frame_size
+
601 sizeof(struct e1000_tx_desc
) -
603 min_tx_space
= ALIGN(min_tx_space
, 1024);
605 /* software strips receive CRC, so leave room for it */
606 min_rx_space
= hw
->max_frame_size
;
607 min_rx_space
= ALIGN(min_rx_space
, 1024);
610 /* If current Tx allocation is less than the min Tx FIFO size,
611 * and the min Tx FIFO size is less than the current Rx FIFO
612 * allocation, take space away from current Rx allocation */
613 if (tx_space
< min_tx_space
&&
614 ((min_tx_space
- tx_space
) < pba
)) {
615 pba
= pba
- (min_tx_space
- tx_space
);
617 /* PCI/PCIx hardware has PBA alignment constraints */
618 switch (hw
->mac_type
) {
619 case e1000_82545
... e1000_82546_rev_3
:
620 pba
&= ~(E1000_PBA_8K
- 1);
626 /* if short on rx space, rx wins and must trump tx
627 * adjustment or use Early Receive if available */
628 if (pba
< min_rx_space
)
636 * flow control settings:
637 * The high water mark must be low enough to fit one full frame
638 * (or the size used for early receive) above it in the Rx FIFO.
639 * Set it to the lower of:
640 * - 90% of the Rx FIFO size, and
641 * - the full Rx FIFO size minus the early receive size (for parts
642 * with ERT support assuming ERT set to E1000_ERT_2048), or
643 * - the full Rx FIFO size minus one full frame
645 hwm
= min(((pba
<< 10) * 9 / 10),
646 ((pba
<< 10) - hw
->max_frame_size
));
648 hw
->fc_high_water
= hwm
& 0xFFF8; /* 8-byte granularity */
649 hw
->fc_low_water
= hw
->fc_high_water
- 8;
650 hw
->fc_pause_time
= E1000_FC_PAUSE_TIME
;
652 hw
->fc
= hw
->original_fc
;
654 /* Allow time for pending master requests to run */
656 if (hw
->mac_type
>= e1000_82544
)
659 if (e1000_init_hw(hw
))
660 e_dev_err("Hardware Error\n");
661 e1000_update_mng_vlan(adapter
);
663 /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
664 if (hw
->mac_type
>= e1000_82544
&&
666 hw
->autoneg_advertised
== ADVERTISE_1000_FULL
) {
667 u32 ctrl
= er32(CTRL
);
668 /* clear phy power management bit if we are in gig only mode,
669 * which if enabled will attempt negotiation to 100Mb, which
670 * can cause a loss of link at power off or driver unload */
671 ctrl
&= ~E1000_CTRL_SWDPIN3
;
675 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
676 ew32(VET
, ETHERNET_IEEE_VLAN_TYPE
);
678 e1000_reset_adaptive(hw
);
679 e1000_phy_get_info(hw
, &adapter
->phy_info
);
681 e1000_release_manageability(adapter
);
685 * Dump the eeprom for users having checksum issues
687 static void e1000_dump_eeprom(struct e1000_adapter
*adapter
)
689 struct net_device
*netdev
= adapter
->netdev
;
690 struct ethtool_eeprom eeprom
;
691 const struct ethtool_ops
*ops
= netdev
->ethtool_ops
;
694 u16 csum_old
, csum_new
= 0;
696 eeprom
.len
= ops
->get_eeprom_len(netdev
);
699 data
= kmalloc(eeprom
.len
, GFP_KERNEL
);
701 pr_err("Unable to allocate memory to dump EEPROM data\n");
705 ops
->get_eeprom(netdev
, &eeprom
, data
);
707 csum_old
= (data
[EEPROM_CHECKSUM_REG
* 2]) +
708 (data
[EEPROM_CHECKSUM_REG
* 2 + 1] << 8);
709 for (i
= 0; i
< EEPROM_CHECKSUM_REG
* 2; i
+= 2)
710 csum_new
+= data
[i
] + (data
[i
+ 1] << 8);
711 csum_new
= EEPROM_SUM
- csum_new
;
713 pr_err("/*********************/\n");
714 pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old
);
715 pr_err("Calculated : 0x%04x\n", csum_new
);
717 pr_err("Offset Values\n");
718 pr_err("======== ======\n");
719 print_hex_dump(KERN_ERR
, "", DUMP_PREFIX_OFFSET
, 16, 1, data
, 128, 0);
721 pr_err("Include this output when contacting your support provider.\n");
722 pr_err("This is not a software error! Something bad happened to\n");
723 pr_err("your hardware or EEPROM image. Ignoring this problem could\n");
724 pr_err("result in further problems, possibly loss of data,\n");
725 pr_err("corruption or system hangs!\n");
726 pr_err("The MAC Address will be reset to 00:00:00:00:00:00,\n");
727 pr_err("which is invalid and requires you to set the proper MAC\n");
728 pr_err("address manually before continuing to enable this network\n");
729 pr_err("device. Please inspect the EEPROM dump and report the\n");
730 pr_err("issue to your hardware vendor or Intel Customer Support.\n");
731 pr_err("/*********************/\n");
737 * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
738 * @pdev: PCI device information struct
740 * Return true if an adapter needs ioport resources
742 static int e1000_is_need_ioport(struct pci_dev
*pdev
)
744 switch (pdev
->device
) {
745 case E1000_DEV_ID_82540EM
:
746 case E1000_DEV_ID_82540EM_LOM
:
747 case E1000_DEV_ID_82540EP
:
748 case E1000_DEV_ID_82540EP_LOM
:
749 case E1000_DEV_ID_82540EP_LP
:
750 case E1000_DEV_ID_82541EI
:
751 case E1000_DEV_ID_82541EI_MOBILE
:
752 case E1000_DEV_ID_82541ER
:
753 case E1000_DEV_ID_82541ER_LOM
:
754 case E1000_DEV_ID_82541GI
:
755 case E1000_DEV_ID_82541GI_LF
:
756 case E1000_DEV_ID_82541GI_MOBILE
:
757 case E1000_DEV_ID_82544EI_COPPER
:
758 case E1000_DEV_ID_82544EI_FIBER
:
759 case E1000_DEV_ID_82544GC_COPPER
:
760 case E1000_DEV_ID_82544GC_LOM
:
761 case E1000_DEV_ID_82545EM_COPPER
:
762 case E1000_DEV_ID_82545EM_FIBER
:
763 case E1000_DEV_ID_82546EB_COPPER
:
764 case E1000_DEV_ID_82546EB_FIBER
:
765 case E1000_DEV_ID_82546EB_QUAD_COPPER
:
772 static const struct net_device_ops e1000_netdev_ops
= {
773 .ndo_open
= e1000_open
,
774 .ndo_stop
= e1000_close
,
775 .ndo_start_xmit
= e1000_xmit_frame
,
776 .ndo_get_stats
= e1000_get_stats
,
777 .ndo_set_rx_mode
= e1000_set_rx_mode
,
778 .ndo_set_mac_address
= e1000_set_mac
,
779 .ndo_tx_timeout
= e1000_tx_timeout
,
780 .ndo_change_mtu
= e1000_change_mtu
,
781 .ndo_do_ioctl
= e1000_ioctl
,
782 .ndo_validate_addr
= eth_validate_addr
,
784 .ndo_vlan_rx_register
= e1000_vlan_rx_register
,
785 .ndo_vlan_rx_add_vid
= e1000_vlan_rx_add_vid
,
786 .ndo_vlan_rx_kill_vid
= e1000_vlan_rx_kill_vid
,
787 #ifdef CONFIG_NET_POLL_CONTROLLER
788 .ndo_poll_controller
= e1000_netpoll
,
793 * e1000_probe - Device Initialization Routine
794 * @pdev: PCI device information struct
795 * @ent: entry in e1000_pci_tbl
797 * Returns 0 on success, negative on failure
799 * e1000_probe initializes an adapter identified by a pci_dev structure.
800 * The OS initialization, configuring of the adapter private structure,
801 * and a hardware reset occur.
803 static int __devinit
e1000_probe(struct pci_dev
*pdev
,
804 const struct pci_device_id
*ent
)
806 struct net_device
*netdev
;
807 struct e1000_adapter
*adapter
;
810 static int cards_found
= 0;
811 static int global_quad_port_a
= 0; /* global ksp3 port a indication */
812 int i
, err
, pci_using_dac
;
814 u16 eeprom_apme_mask
= E1000_EEPROM_APME
;
815 int bars
, need_ioport
;
817 /* do not allocate ioport bars when not needed */
818 need_ioport
= e1000_is_need_ioport(pdev
);
820 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
| IORESOURCE_IO
);
821 err
= pci_enable_device(pdev
);
823 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
824 err
= pci_enable_device_mem(pdev
);
829 if (!dma_set_mask(&pdev
->dev
, DMA_BIT_MASK(64)) &&
830 !dma_set_coherent_mask(&pdev
->dev
, DMA_BIT_MASK(64))) {
833 err
= dma_set_mask(&pdev
->dev
, DMA_BIT_MASK(32));
835 err
= dma_set_coherent_mask(&pdev
->dev
,
838 pr_err("No usable DMA config, aborting\n");
845 err
= pci_request_selected_regions(pdev
, bars
, e1000_driver_name
);
849 pci_set_master(pdev
);
850 err
= pci_save_state(pdev
);
852 goto err_alloc_etherdev
;
855 netdev
= alloc_etherdev(sizeof(struct e1000_adapter
));
857 goto err_alloc_etherdev
;
859 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
861 pci_set_drvdata(pdev
, netdev
);
862 adapter
= netdev_priv(netdev
);
863 adapter
->netdev
= netdev
;
864 adapter
->pdev
= pdev
;
865 adapter
->msg_enable
= (1 << debug
) - 1;
866 adapter
->bars
= bars
;
867 adapter
->need_ioport
= need_ioport
;
873 hw
->hw_addr
= pci_ioremap_bar(pdev
, BAR_0
);
877 if (adapter
->need_ioport
) {
878 for (i
= BAR_1
; i
<= BAR_5
; i
++) {
879 if (pci_resource_len(pdev
, i
) == 0)
881 if (pci_resource_flags(pdev
, i
) & IORESOURCE_IO
) {
882 hw
->io_base
= pci_resource_start(pdev
, i
);
888 netdev
->netdev_ops
= &e1000_netdev_ops
;
889 e1000_set_ethtool_ops(netdev
);
890 netdev
->watchdog_timeo
= 5 * HZ
;
891 netif_napi_add(netdev
, &adapter
->napi
, e1000_clean
, 64);
893 strncpy(netdev
->name
, pci_name(pdev
), sizeof(netdev
->name
) - 1);
895 adapter
->bd_number
= cards_found
;
897 /* setup the private structure */
899 err
= e1000_sw_init(adapter
);
905 if (hw
->mac_type
>= e1000_82543
) {
906 netdev
->features
= NETIF_F_SG
|
910 NETIF_F_HW_VLAN_FILTER
;
913 if ((hw
->mac_type
>= e1000_82544
) &&
914 (hw
->mac_type
!= e1000_82547
))
915 netdev
->features
|= NETIF_F_TSO
;
918 netdev
->features
|= NETIF_F_HIGHDMA
;
920 netdev
->vlan_features
|= NETIF_F_TSO
;
921 netdev
->vlan_features
|= NETIF_F_HW_CSUM
;
922 netdev
->vlan_features
|= NETIF_F_SG
;
924 adapter
->en_mng_pt
= e1000_enable_mng_pass_thru(hw
);
926 /* initialize eeprom parameters */
927 if (e1000_init_eeprom_params(hw
)) {
928 e_err(probe
, "EEPROM initialization failed\n");
932 /* before reading the EEPROM, reset the controller to
933 * put the device in a known good starting state */
937 /* make sure the EEPROM is good */
938 if (e1000_validate_eeprom_checksum(hw
) < 0) {
939 e_err(probe
, "The EEPROM Checksum Is Not Valid\n");
940 e1000_dump_eeprom(adapter
);
942 * set MAC address to all zeroes to invalidate and temporary
943 * disable this device for the user. This blocks regular
944 * traffic while still permitting ethtool ioctls from reaching
945 * the hardware as well as allowing the user to run the
946 * interface after manually setting a hw addr using
949 memset(hw
->mac_addr
, 0, netdev
->addr_len
);
951 /* copy the MAC address out of the EEPROM */
952 if (e1000_read_mac_addr(hw
))
953 e_err(probe
, "EEPROM Read Error\n");
955 /* don't block initalization here due to bad MAC address */
956 memcpy(netdev
->dev_addr
, hw
->mac_addr
, netdev
->addr_len
);
957 memcpy(netdev
->perm_addr
, hw
->mac_addr
, netdev
->addr_len
);
959 if (!is_valid_ether_addr(netdev
->perm_addr
))
960 e_err(probe
, "Invalid MAC Address\n");
962 e1000_get_bus_info(hw
);
964 init_timer(&adapter
->tx_fifo_stall_timer
);
965 adapter
->tx_fifo_stall_timer
.function
= e1000_82547_tx_fifo_stall
;
966 adapter
->tx_fifo_stall_timer
.data
= (unsigned long)adapter
;
968 init_timer(&adapter
->watchdog_timer
);
969 adapter
->watchdog_timer
.function
= e1000_watchdog
;
970 adapter
->watchdog_timer
.data
= (unsigned long) adapter
;
972 init_timer(&adapter
->phy_info_timer
);
973 adapter
->phy_info_timer
.function
= e1000_update_phy_info
;
974 adapter
->phy_info_timer
.data
= (unsigned long)adapter
;
976 INIT_WORK(&adapter
->reset_task
, e1000_reset_task
);
978 e1000_check_options(adapter
);
980 /* Initial Wake on LAN setting
981 * If APM wake is enabled in the EEPROM,
982 * enable the ACPI Magic Packet filter
985 switch (hw
->mac_type
) {
986 case e1000_82542_rev2_0
:
987 case e1000_82542_rev2_1
:
991 e1000_read_eeprom(hw
,
992 EEPROM_INIT_CONTROL2_REG
, 1, &eeprom_data
);
993 eeprom_apme_mask
= E1000_EEPROM_82544_APM
;
996 case e1000_82546_rev_3
:
997 if (er32(STATUS
) & E1000_STATUS_FUNC_1
){
998 e1000_read_eeprom(hw
,
999 EEPROM_INIT_CONTROL3_PORT_B
, 1, &eeprom_data
);
1004 e1000_read_eeprom(hw
,
1005 EEPROM_INIT_CONTROL3_PORT_A
, 1, &eeprom_data
);
1008 if (eeprom_data
& eeprom_apme_mask
)
1009 adapter
->eeprom_wol
|= E1000_WUFC_MAG
;
1011 /* now that we have the eeprom settings, apply the special cases
1012 * where the eeprom may be wrong or the board simply won't support
1013 * wake on lan on a particular port */
1014 switch (pdev
->device
) {
1015 case E1000_DEV_ID_82546GB_PCIE
:
1016 adapter
->eeprom_wol
= 0;
1018 case E1000_DEV_ID_82546EB_FIBER
:
1019 case E1000_DEV_ID_82546GB_FIBER
:
1020 /* Wake events only supported on port A for dual fiber
1021 * regardless of eeprom setting */
1022 if (er32(STATUS
) & E1000_STATUS_FUNC_1
)
1023 adapter
->eeprom_wol
= 0;
1025 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3
:
1026 /* if quad port adapter, disable WoL on all but port A */
1027 if (global_quad_port_a
!= 0)
1028 adapter
->eeprom_wol
= 0;
1030 adapter
->quad_port_a
= 1;
1031 /* Reset for multiple quad port adapters */
1032 if (++global_quad_port_a
== 4)
1033 global_quad_port_a
= 0;
1037 /* initialize the wol settings based on the eeprom settings */
1038 adapter
->wol
= adapter
->eeprom_wol
;
1039 device_set_wakeup_enable(&adapter
->pdev
->dev
, adapter
->wol
);
1041 /* reset the hardware with the new settings */
1042 e1000_reset(adapter
);
1044 strcpy(netdev
->name
, "eth%d");
1045 err
= register_netdev(netdev
);
1049 /* print bus type/speed/width info */
1050 e_info(probe
, "(PCI%s:%dMHz:%d-bit) %pM\n",
1051 ((hw
->bus_type
== e1000_bus_type_pcix
) ? "-X" : ""),
1052 ((hw
->bus_speed
== e1000_bus_speed_133
) ? 133 :
1053 (hw
->bus_speed
== e1000_bus_speed_120
) ? 120 :
1054 (hw
->bus_speed
== e1000_bus_speed_100
) ? 100 :
1055 (hw
->bus_speed
== e1000_bus_speed_66
) ? 66 : 33),
1056 ((hw
->bus_width
== e1000_bus_width_64
) ? 64 : 32),
1059 /* carrier off reporting is important to ethtool even BEFORE open */
1060 netif_carrier_off(netdev
);
1062 e_info(probe
, "Intel(R) PRO/1000 Network Connection\n");
1069 e1000_phy_hw_reset(hw
);
1071 if (hw
->flash_address
)
1072 iounmap(hw
->flash_address
);
1073 kfree(adapter
->tx_ring
);
1074 kfree(adapter
->rx_ring
);
1076 iounmap(hw
->hw_addr
);
1078 free_netdev(netdev
);
1080 pci_release_selected_regions(pdev
, bars
);
1083 pci_disable_device(pdev
);
1088 * e1000_remove - Device Removal Routine
1089 * @pdev: PCI device information struct
1091 * e1000_remove is called by the PCI subsystem to alert the driver
1092 * that it should release a PCI device. The could be caused by a
1093 * Hot-Plug event, or because the driver is going to be removed from
1097 static void __devexit
e1000_remove(struct pci_dev
*pdev
)
1099 struct net_device
*netdev
= pci_get_drvdata(pdev
);
1100 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1101 struct e1000_hw
*hw
= &adapter
->hw
;
1103 set_bit(__E1000_DOWN
, &adapter
->flags
);
1104 del_timer_sync(&adapter
->tx_fifo_stall_timer
);
1105 del_timer_sync(&adapter
->watchdog_timer
);
1106 del_timer_sync(&adapter
->phy_info_timer
);
1108 cancel_work_sync(&adapter
->reset_task
);
1110 e1000_release_manageability(adapter
);
1112 unregister_netdev(netdev
);
1114 e1000_phy_hw_reset(hw
);
1116 kfree(adapter
->tx_ring
);
1117 kfree(adapter
->rx_ring
);
1119 iounmap(hw
->hw_addr
);
1120 if (hw
->flash_address
)
1121 iounmap(hw
->flash_address
);
1122 pci_release_selected_regions(pdev
, adapter
->bars
);
1124 free_netdev(netdev
);
1126 pci_disable_device(pdev
);
1130 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1131 * @adapter: board private structure to initialize
1133 * e1000_sw_init initializes the Adapter private data structure.
1134 * Fields are initialized based on PCI device information and
1135 * OS network device settings (MTU size).
1138 static int __devinit
e1000_sw_init(struct e1000_adapter
*adapter
)
1140 struct e1000_hw
*hw
= &adapter
->hw
;
1141 struct net_device
*netdev
= adapter
->netdev
;
1142 struct pci_dev
*pdev
= adapter
->pdev
;
1144 /* PCI config space info */
1146 hw
->vendor_id
= pdev
->vendor
;
1147 hw
->device_id
= pdev
->device
;
1148 hw
->subsystem_vendor_id
= pdev
->subsystem_vendor
;
1149 hw
->subsystem_id
= pdev
->subsystem_device
;
1150 hw
->revision_id
= pdev
->revision
;
1152 pci_read_config_word(pdev
, PCI_COMMAND
, &hw
->pci_cmd_word
);
1154 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
1155 hw
->max_frame_size
= netdev
->mtu
+
1156 ENET_HEADER_SIZE
+ ETHERNET_FCS_SIZE
;
1157 hw
->min_frame_size
= MINIMUM_ETHERNET_FRAME_SIZE
;
1159 /* identify the MAC */
1161 if (e1000_set_mac_type(hw
)) {
1162 e_err(probe
, "Unknown MAC Type\n");
1166 switch (hw
->mac_type
) {
1171 case e1000_82541_rev_2
:
1172 case e1000_82547_rev_2
:
1173 hw
->phy_init_script
= 1;
1177 e1000_set_media_type(hw
);
1179 hw
->wait_autoneg_complete
= false;
1180 hw
->tbi_compatibility_en
= true;
1181 hw
->adaptive_ifs
= true;
1183 /* Copper options */
1185 if (hw
->media_type
== e1000_media_type_copper
) {
1186 hw
->mdix
= AUTO_ALL_MODES
;
1187 hw
->disable_polarity_correction
= false;
1188 hw
->master_slave
= E1000_MASTER_SLAVE
;
1191 adapter
->num_tx_queues
= 1;
1192 adapter
->num_rx_queues
= 1;
1194 if (e1000_alloc_queues(adapter
)) {
1195 e_err(probe
, "Unable to allocate memory for queues\n");
1199 /* Explicitly disable IRQ since the NIC can be in any state. */
1200 e1000_irq_disable(adapter
);
1202 spin_lock_init(&adapter
->stats_lock
);
1204 set_bit(__E1000_DOWN
, &adapter
->flags
);
1210 * e1000_alloc_queues - Allocate memory for all rings
1211 * @adapter: board private structure to initialize
1213 * We allocate one ring per queue at run-time since we don't know the
1214 * number of queues at compile-time.
1217 static int __devinit
e1000_alloc_queues(struct e1000_adapter
*adapter
)
1219 adapter
->tx_ring
= kcalloc(adapter
->num_tx_queues
,
1220 sizeof(struct e1000_tx_ring
), GFP_KERNEL
);
1221 if (!adapter
->tx_ring
)
1224 adapter
->rx_ring
= kcalloc(adapter
->num_rx_queues
,
1225 sizeof(struct e1000_rx_ring
), GFP_KERNEL
);
1226 if (!adapter
->rx_ring
) {
1227 kfree(adapter
->tx_ring
);
1231 return E1000_SUCCESS
;
1235 * e1000_open - Called when a network interface is made active
1236 * @netdev: network interface device structure
1238 * Returns 0 on success, negative value on failure
1240 * The open entry point is called when a network interface is made
1241 * active by the system (IFF_UP). At this point all resources needed
1242 * for transmit and receive operations are allocated, the interrupt
1243 * handler is registered with the OS, the watchdog timer is started,
1244 * and the stack is notified that the interface is ready.
1247 static int e1000_open(struct net_device
*netdev
)
1249 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1250 struct e1000_hw
*hw
= &adapter
->hw
;
1253 /* disallow open during test */
1254 if (test_bit(__E1000_TESTING
, &adapter
->flags
))
1257 netif_carrier_off(netdev
);
1259 /* allocate transmit descriptors */
1260 err
= e1000_setup_all_tx_resources(adapter
);
1264 /* allocate receive descriptors */
1265 err
= e1000_setup_all_rx_resources(adapter
);
1269 e1000_power_up_phy(adapter
);
1271 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
1272 if ((hw
->mng_cookie
.status
&
1273 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
)) {
1274 e1000_update_mng_vlan(adapter
);
1277 /* before we allocate an interrupt, we must be ready to handle it.
1278 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
1279 * as soon as we call pci_request_irq, so we have to setup our
1280 * clean_rx handler before we do so. */
1281 e1000_configure(adapter
);
1283 err
= e1000_request_irq(adapter
);
1287 /* From here on the code is the same as e1000_up() */
1288 clear_bit(__E1000_DOWN
, &adapter
->flags
);
1290 napi_enable(&adapter
->napi
);
1292 e1000_irq_enable(adapter
);
1294 netif_start_queue(netdev
);
1296 /* fire a link status change interrupt to start the watchdog */
1297 ew32(ICS
, E1000_ICS_LSC
);
1299 return E1000_SUCCESS
;
1302 e1000_power_down_phy(adapter
);
1303 e1000_free_all_rx_resources(adapter
);
1305 e1000_free_all_tx_resources(adapter
);
1307 e1000_reset(adapter
);
1313 * e1000_close - Disables a network interface
1314 * @netdev: network interface device structure
1316 * Returns 0, this is not allowed to fail
1318 * The close entry point is called when an interface is de-activated
1319 * by the OS. The hardware is still under the drivers control, but
1320 * needs to be disabled. A global MAC reset is issued to stop the
1321 * hardware, and all transmit and receive resources are freed.
1324 static int e1000_close(struct net_device
*netdev
)
1326 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1327 struct e1000_hw
*hw
= &adapter
->hw
;
1329 WARN_ON(test_bit(__E1000_RESETTING
, &adapter
->flags
));
1330 e1000_down(adapter
);
1331 e1000_power_down_phy(adapter
);
1332 e1000_free_irq(adapter
);
1334 e1000_free_all_tx_resources(adapter
);
1335 e1000_free_all_rx_resources(adapter
);
1337 /* kill manageability vlan ID if supported, but not if a vlan with
1338 * the same ID is registered on the host OS (let 8021q kill it) */
1339 if ((hw
->mng_cookie
.status
&
1340 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
1342 vlan_group_get_device(adapter
->vlgrp
, adapter
->mng_vlan_id
))) {
1343 e1000_vlan_rx_kill_vid(netdev
, adapter
->mng_vlan_id
);
1350 * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1351 * @adapter: address of board private structure
1352 * @start: address of beginning of memory
1353 * @len: length of memory
1355 static bool e1000_check_64k_bound(struct e1000_adapter
*adapter
, void *start
,
1358 struct e1000_hw
*hw
= &adapter
->hw
;
1359 unsigned long begin
= (unsigned long)start
;
1360 unsigned long end
= begin
+ len
;
1362 /* First rev 82545 and 82546 need to not allow any memory
1363 * write location to cross 64k boundary due to errata 23 */
1364 if (hw
->mac_type
== e1000_82545
||
1365 hw
->mac_type
== e1000_82546
) {
1366 return ((begin
^ (end
- 1)) >> 16) != 0 ? false : true;
1373 * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1374 * @adapter: board private structure
1375 * @txdr: tx descriptor ring (for a specific queue) to setup
1377 * Return 0 on success, negative on failure
1380 static int e1000_setup_tx_resources(struct e1000_adapter
*adapter
,
1381 struct e1000_tx_ring
*txdr
)
1383 struct pci_dev
*pdev
= adapter
->pdev
;
1386 size
= sizeof(struct e1000_buffer
) * txdr
->count
;
1387 txdr
->buffer_info
= vmalloc(size
);
1388 if (!txdr
->buffer_info
) {
1389 e_err(probe
, "Unable to allocate memory for the Tx descriptor "
1393 memset(txdr
->buffer_info
, 0, size
);
1395 /* round up to nearest 4K */
1397 txdr
->size
= txdr
->count
* sizeof(struct e1000_tx_desc
);
1398 txdr
->size
= ALIGN(txdr
->size
, 4096);
1400 txdr
->desc
= dma_alloc_coherent(&pdev
->dev
, txdr
->size
, &txdr
->dma
,
1404 vfree(txdr
->buffer_info
);
1405 e_err(probe
, "Unable to allocate memory for the Tx descriptor "
1410 /* Fix for errata 23, can't cross 64kB boundary */
1411 if (!e1000_check_64k_bound(adapter
, txdr
->desc
, txdr
->size
)) {
1412 void *olddesc
= txdr
->desc
;
1413 dma_addr_t olddma
= txdr
->dma
;
1414 e_err(tx_err
, "txdr align check failed: %u bytes at %p\n",
1415 txdr
->size
, txdr
->desc
);
1416 /* Try again, without freeing the previous */
1417 txdr
->desc
= dma_alloc_coherent(&pdev
->dev
, txdr
->size
,
1418 &txdr
->dma
, GFP_KERNEL
);
1419 /* Failed allocation, critical failure */
1421 dma_free_coherent(&pdev
->dev
, txdr
->size
, olddesc
,
1423 goto setup_tx_desc_die
;
1426 if (!e1000_check_64k_bound(adapter
, txdr
->desc
, txdr
->size
)) {
1428 dma_free_coherent(&pdev
->dev
, txdr
->size
, txdr
->desc
,
1430 dma_free_coherent(&pdev
->dev
, txdr
->size
, olddesc
,
1432 e_err(probe
, "Unable to allocate aligned memory "
1433 "for the transmit descriptor ring\n");
1434 vfree(txdr
->buffer_info
);
1437 /* Free old allocation, new allocation was successful */
1438 dma_free_coherent(&pdev
->dev
, txdr
->size
, olddesc
,
1442 memset(txdr
->desc
, 0, txdr
->size
);
1444 txdr
->next_to_use
= 0;
1445 txdr
->next_to_clean
= 0;
1451 * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1452 * (Descriptors) for all queues
1453 * @adapter: board private structure
1455 * Return 0 on success, negative on failure
1458 int e1000_setup_all_tx_resources(struct e1000_adapter
*adapter
)
1462 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
1463 err
= e1000_setup_tx_resources(adapter
, &adapter
->tx_ring
[i
]);
1465 e_err(probe
, "Allocation for Tx Queue %u failed\n", i
);
1466 for (i
-- ; i
>= 0; i
--)
1467 e1000_free_tx_resources(adapter
,
1468 &adapter
->tx_ring
[i
]);
1477 * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1478 * @adapter: board private structure
1480 * Configure the Tx unit of the MAC after a reset.
1483 static void e1000_configure_tx(struct e1000_adapter
*adapter
)
1486 struct e1000_hw
*hw
= &adapter
->hw
;
1487 u32 tdlen
, tctl
, tipg
;
1490 /* Setup the HW Tx Head and Tail descriptor pointers */
1492 switch (adapter
->num_tx_queues
) {
1495 tdba
= adapter
->tx_ring
[0].dma
;
1496 tdlen
= adapter
->tx_ring
[0].count
*
1497 sizeof(struct e1000_tx_desc
);
1499 ew32(TDBAH
, (tdba
>> 32));
1500 ew32(TDBAL
, (tdba
& 0x00000000ffffffffULL
));
1503 adapter
->tx_ring
[0].tdh
= ((hw
->mac_type
>= e1000_82543
) ? E1000_TDH
: E1000_82542_TDH
);
1504 adapter
->tx_ring
[0].tdt
= ((hw
->mac_type
>= e1000_82543
) ? E1000_TDT
: E1000_82542_TDT
);
1508 /* Set the default values for the Tx Inter Packet Gap timer */
1509 if ((hw
->media_type
== e1000_media_type_fiber
||
1510 hw
->media_type
== e1000_media_type_internal_serdes
))
1511 tipg
= DEFAULT_82543_TIPG_IPGT_FIBER
;
1513 tipg
= DEFAULT_82543_TIPG_IPGT_COPPER
;
1515 switch (hw
->mac_type
) {
1516 case e1000_82542_rev2_0
:
1517 case e1000_82542_rev2_1
:
1518 tipg
= DEFAULT_82542_TIPG_IPGT
;
1519 ipgr1
= DEFAULT_82542_TIPG_IPGR1
;
1520 ipgr2
= DEFAULT_82542_TIPG_IPGR2
;
1523 ipgr1
= DEFAULT_82543_TIPG_IPGR1
;
1524 ipgr2
= DEFAULT_82543_TIPG_IPGR2
;
1527 tipg
|= ipgr1
<< E1000_TIPG_IPGR1_SHIFT
;
1528 tipg
|= ipgr2
<< E1000_TIPG_IPGR2_SHIFT
;
1531 /* Set the Tx Interrupt Delay register */
1533 ew32(TIDV
, adapter
->tx_int_delay
);
1534 if (hw
->mac_type
>= e1000_82540
)
1535 ew32(TADV
, adapter
->tx_abs_int_delay
);
1537 /* Program the Transmit Control Register */
1540 tctl
&= ~E1000_TCTL_CT
;
1541 tctl
|= E1000_TCTL_PSP
| E1000_TCTL_RTLC
|
1542 (E1000_COLLISION_THRESHOLD
<< E1000_CT_SHIFT
);
1544 e1000_config_collision_dist(hw
);
1546 /* Setup Transmit Descriptor Settings for eop descriptor */
1547 adapter
->txd_cmd
= E1000_TXD_CMD_EOP
| E1000_TXD_CMD_IFCS
;
1549 /* only set IDE if we are delaying interrupts using the timers */
1550 if (adapter
->tx_int_delay
)
1551 adapter
->txd_cmd
|= E1000_TXD_CMD_IDE
;
1553 if (hw
->mac_type
< e1000_82543
)
1554 adapter
->txd_cmd
|= E1000_TXD_CMD_RPS
;
1556 adapter
->txd_cmd
|= E1000_TXD_CMD_RS
;
1558 /* Cache if we're 82544 running in PCI-X because we'll
1559 * need this to apply a workaround later in the send path. */
1560 if (hw
->mac_type
== e1000_82544
&&
1561 hw
->bus_type
== e1000_bus_type_pcix
)
1562 adapter
->pcix_82544
= 1;
1569 * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1570 * @adapter: board private structure
1571 * @rxdr: rx descriptor ring (for a specific queue) to setup
1573 * Returns 0 on success, negative on failure
1576 static int e1000_setup_rx_resources(struct e1000_adapter
*adapter
,
1577 struct e1000_rx_ring
*rxdr
)
1579 struct pci_dev
*pdev
= adapter
->pdev
;
1582 size
= sizeof(struct e1000_buffer
) * rxdr
->count
;
1583 rxdr
->buffer_info
= vmalloc(size
);
1584 if (!rxdr
->buffer_info
) {
1585 e_err(probe
, "Unable to allocate memory for the Rx descriptor "
1589 memset(rxdr
->buffer_info
, 0, size
);
1591 desc_len
= sizeof(struct e1000_rx_desc
);
1593 /* Round up to nearest 4K */
1595 rxdr
->size
= rxdr
->count
* desc_len
;
1596 rxdr
->size
= ALIGN(rxdr
->size
, 4096);
1598 rxdr
->desc
= dma_alloc_coherent(&pdev
->dev
, rxdr
->size
, &rxdr
->dma
,
1602 e_err(probe
, "Unable to allocate memory for the Rx descriptor "
1605 vfree(rxdr
->buffer_info
);
1609 /* Fix for errata 23, can't cross 64kB boundary */
1610 if (!e1000_check_64k_bound(adapter
, rxdr
->desc
, rxdr
->size
)) {
1611 void *olddesc
= rxdr
->desc
;
1612 dma_addr_t olddma
= rxdr
->dma
;
1613 e_err(rx_err
, "rxdr align check failed: %u bytes at %p\n",
1614 rxdr
->size
, rxdr
->desc
);
1615 /* Try again, without freeing the previous */
1616 rxdr
->desc
= dma_alloc_coherent(&pdev
->dev
, rxdr
->size
,
1617 &rxdr
->dma
, GFP_KERNEL
);
1618 /* Failed allocation, critical failure */
1620 dma_free_coherent(&pdev
->dev
, rxdr
->size
, olddesc
,
1622 e_err(probe
, "Unable to allocate memory for the Rx "
1623 "descriptor ring\n");
1624 goto setup_rx_desc_die
;
1627 if (!e1000_check_64k_bound(adapter
, rxdr
->desc
, rxdr
->size
)) {
1629 dma_free_coherent(&pdev
->dev
, rxdr
->size
, rxdr
->desc
,
1631 dma_free_coherent(&pdev
->dev
, rxdr
->size
, olddesc
,
1633 e_err(probe
, "Unable to allocate aligned memory for "
1634 "the Rx descriptor ring\n");
1635 goto setup_rx_desc_die
;
1637 /* Free old allocation, new allocation was successful */
1638 dma_free_coherent(&pdev
->dev
, rxdr
->size
, olddesc
,
1642 memset(rxdr
->desc
, 0, rxdr
->size
);
1644 rxdr
->next_to_clean
= 0;
1645 rxdr
->next_to_use
= 0;
1646 rxdr
->rx_skb_top
= NULL
;
1652 * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1653 * (Descriptors) for all queues
1654 * @adapter: board private structure
1656 * Return 0 on success, negative on failure
1659 int e1000_setup_all_rx_resources(struct e1000_adapter
*adapter
)
1663 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1664 err
= e1000_setup_rx_resources(adapter
, &adapter
->rx_ring
[i
]);
1666 e_err(probe
, "Allocation for Rx Queue %u failed\n", i
);
1667 for (i
-- ; i
>= 0; i
--)
1668 e1000_free_rx_resources(adapter
,
1669 &adapter
->rx_ring
[i
]);
1678 * e1000_setup_rctl - configure the receive control registers
1679 * @adapter: Board private structure
1681 static void e1000_setup_rctl(struct e1000_adapter
*adapter
)
1683 struct e1000_hw
*hw
= &adapter
->hw
;
1688 rctl
&= ~(3 << E1000_RCTL_MO_SHIFT
);
1690 rctl
|= E1000_RCTL_EN
| E1000_RCTL_BAM
|
1691 E1000_RCTL_LBM_NO
| E1000_RCTL_RDMTS_HALF
|
1692 (hw
->mc_filter_type
<< E1000_RCTL_MO_SHIFT
);
1694 if (hw
->tbi_compatibility_on
== 1)
1695 rctl
|= E1000_RCTL_SBP
;
1697 rctl
&= ~E1000_RCTL_SBP
;
1699 if (adapter
->netdev
->mtu
<= ETH_DATA_LEN
)
1700 rctl
&= ~E1000_RCTL_LPE
;
1702 rctl
|= E1000_RCTL_LPE
;
1704 /* Setup buffer sizes */
1705 rctl
&= ~E1000_RCTL_SZ_4096
;
1706 rctl
|= E1000_RCTL_BSEX
;
1707 switch (adapter
->rx_buffer_len
) {
1708 case E1000_RXBUFFER_2048
:
1710 rctl
|= E1000_RCTL_SZ_2048
;
1711 rctl
&= ~E1000_RCTL_BSEX
;
1713 case E1000_RXBUFFER_4096
:
1714 rctl
|= E1000_RCTL_SZ_4096
;
1716 case E1000_RXBUFFER_8192
:
1717 rctl
|= E1000_RCTL_SZ_8192
;
1719 case E1000_RXBUFFER_16384
:
1720 rctl
|= E1000_RCTL_SZ_16384
;
1728 * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1729 * @adapter: board private structure
1731 * Configure the Rx unit of the MAC after a reset.
1734 static void e1000_configure_rx(struct e1000_adapter
*adapter
)
1737 struct e1000_hw
*hw
= &adapter
->hw
;
1738 u32 rdlen
, rctl
, rxcsum
;
1740 if (adapter
->netdev
->mtu
> ETH_DATA_LEN
) {
1741 rdlen
= adapter
->rx_ring
[0].count
*
1742 sizeof(struct e1000_rx_desc
);
1743 adapter
->clean_rx
= e1000_clean_jumbo_rx_irq
;
1744 adapter
->alloc_rx_buf
= e1000_alloc_jumbo_rx_buffers
;
1746 rdlen
= adapter
->rx_ring
[0].count
*
1747 sizeof(struct e1000_rx_desc
);
1748 adapter
->clean_rx
= e1000_clean_rx_irq
;
1749 adapter
->alloc_rx_buf
= e1000_alloc_rx_buffers
;
1752 /* disable receives while setting up the descriptors */
1754 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
1756 /* set the Receive Delay Timer Register */
1757 ew32(RDTR
, adapter
->rx_int_delay
);
1759 if (hw
->mac_type
>= e1000_82540
) {
1760 ew32(RADV
, adapter
->rx_abs_int_delay
);
1761 if (adapter
->itr_setting
!= 0)
1762 ew32(ITR
, 1000000000 / (adapter
->itr
* 256));
1765 /* Setup the HW Rx Head and Tail Descriptor Pointers and
1766 * the Base and Length of the Rx Descriptor Ring */
1767 switch (adapter
->num_rx_queues
) {
1770 rdba
= adapter
->rx_ring
[0].dma
;
1772 ew32(RDBAH
, (rdba
>> 32));
1773 ew32(RDBAL
, (rdba
& 0x00000000ffffffffULL
));
1776 adapter
->rx_ring
[0].rdh
= ((hw
->mac_type
>= e1000_82543
) ? E1000_RDH
: E1000_82542_RDH
);
1777 adapter
->rx_ring
[0].rdt
= ((hw
->mac_type
>= e1000_82543
) ? E1000_RDT
: E1000_82542_RDT
);
1781 /* Enable 82543 Receive Checksum Offload for TCP and UDP */
1782 if (hw
->mac_type
>= e1000_82543
) {
1783 rxcsum
= er32(RXCSUM
);
1784 if (adapter
->rx_csum
)
1785 rxcsum
|= E1000_RXCSUM_TUOFL
;
1787 /* don't need to clear IPPCSE as it defaults to 0 */
1788 rxcsum
&= ~E1000_RXCSUM_TUOFL
;
1789 ew32(RXCSUM
, rxcsum
);
1792 /* Enable Receives */
1797 * e1000_free_tx_resources - Free Tx Resources per Queue
1798 * @adapter: board private structure
1799 * @tx_ring: Tx descriptor ring for a specific queue
1801 * Free all transmit software resources
1804 static void e1000_free_tx_resources(struct e1000_adapter
*adapter
,
1805 struct e1000_tx_ring
*tx_ring
)
1807 struct pci_dev
*pdev
= adapter
->pdev
;
1809 e1000_clean_tx_ring(adapter
, tx_ring
);
1811 vfree(tx_ring
->buffer_info
);
1812 tx_ring
->buffer_info
= NULL
;
1814 dma_free_coherent(&pdev
->dev
, tx_ring
->size
, tx_ring
->desc
,
1817 tx_ring
->desc
= NULL
;
1821 * e1000_free_all_tx_resources - Free Tx Resources for All Queues
1822 * @adapter: board private structure
1824 * Free all transmit software resources
1827 void e1000_free_all_tx_resources(struct e1000_adapter
*adapter
)
1831 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
1832 e1000_free_tx_resources(adapter
, &adapter
->tx_ring
[i
]);
1835 static void e1000_unmap_and_free_tx_resource(struct e1000_adapter
*adapter
,
1836 struct e1000_buffer
*buffer_info
)
1838 if (buffer_info
->dma
) {
1839 if (buffer_info
->mapped_as_page
)
1840 dma_unmap_page(&adapter
->pdev
->dev
, buffer_info
->dma
,
1841 buffer_info
->length
, DMA_TO_DEVICE
);
1843 dma_unmap_single(&adapter
->pdev
->dev
, buffer_info
->dma
,
1844 buffer_info
->length
,
1846 buffer_info
->dma
= 0;
1848 if (buffer_info
->skb
) {
1849 dev_kfree_skb_any(buffer_info
->skb
);
1850 buffer_info
->skb
= NULL
;
1852 buffer_info
->time_stamp
= 0;
1853 /* buffer_info must be completely set up in the transmit path */
1857 * e1000_clean_tx_ring - Free Tx Buffers
1858 * @adapter: board private structure
1859 * @tx_ring: ring to be cleaned
1862 static void e1000_clean_tx_ring(struct e1000_adapter
*adapter
,
1863 struct e1000_tx_ring
*tx_ring
)
1865 struct e1000_hw
*hw
= &adapter
->hw
;
1866 struct e1000_buffer
*buffer_info
;
1870 /* Free all the Tx ring sk_buffs */
1872 for (i
= 0; i
< tx_ring
->count
; i
++) {
1873 buffer_info
= &tx_ring
->buffer_info
[i
];
1874 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
1877 size
= sizeof(struct e1000_buffer
) * tx_ring
->count
;
1878 memset(tx_ring
->buffer_info
, 0, size
);
1880 /* Zero out the descriptor ring */
1882 memset(tx_ring
->desc
, 0, tx_ring
->size
);
1884 tx_ring
->next_to_use
= 0;
1885 tx_ring
->next_to_clean
= 0;
1886 tx_ring
->last_tx_tso
= 0;
1888 writel(0, hw
->hw_addr
+ tx_ring
->tdh
);
1889 writel(0, hw
->hw_addr
+ tx_ring
->tdt
);
1893 * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
1894 * @adapter: board private structure
1897 static void e1000_clean_all_tx_rings(struct e1000_adapter
*adapter
)
1901 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
1902 e1000_clean_tx_ring(adapter
, &adapter
->tx_ring
[i
]);
1906 * e1000_free_rx_resources - Free Rx Resources
1907 * @adapter: board private structure
1908 * @rx_ring: ring to clean the resources from
1910 * Free all receive software resources
1913 static void e1000_free_rx_resources(struct e1000_adapter
*adapter
,
1914 struct e1000_rx_ring
*rx_ring
)
1916 struct pci_dev
*pdev
= adapter
->pdev
;
1918 e1000_clean_rx_ring(adapter
, rx_ring
);
1920 vfree(rx_ring
->buffer_info
);
1921 rx_ring
->buffer_info
= NULL
;
1923 dma_free_coherent(&pdev
->dev
, rx_ring
->size
, rx_ring
->desc
,
1926 rx_ring
->desc
= NULL
;
1930 * e1000_free_all_rx_resources - Free Rx Resources for All Queues
1931 * @adapter: board private structure
1933 * Free all receive software resources
1936 void e1000_free_all_rx_resources(struct e1000_adapter
*adapter
)
1940 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
1941 e1000_free_rx_resources(adapter
, &adapter
->rx_ring
[i
]);
1945 * e1000_clean_rx_ring - Free Rx Buffers per Queue
1946 * @adapter: board private structure
1947 * @rx_ring: ring to free buffers from
1950 static void e1000_clean_rx_ring(struct e1000_adapter
*adapter
,
1951 struct e1000_rx_ring
*rx_ring
)
1953 struct e1000_hw
*hw
= &adapter
->hw
;
1954 struct e1000_buffer
*buffer_info
;
1955 struct pci_dev
*pdev
= adapter
->pdev
;
1959 /* Free all the Rx ring sk_buffs */
1960 for (i
= 0; i
< rx_ring
->count
; i
++) {
1961 buffer_info
= &rx_ring
->buffer_info
[i
];
1962 if (buffer_info
->dma
&&
1963 adapter
->clean_rx
== e1000_clean_rx_irq
) {
1964 dma_unmap_single(&pdev
->dev
, buffer_info
->dma
,
1965 buffer_info
->length
,
1967 } else if (buffer_info
->dma
&&
1968 adapter
->clean_rx
== e1000_clean_jumbo_rx_irq
) {
1969 dma_unmap_page(&pdev
->dev
, buffer_info
->dma
,
1970 buffer_info
->length
,
1974 buffer_info
->dma
= 0;
1975 if (buffer_info
->page
) {
1976 put_page(buffer_info
->page
);
1977 buffer_info
->page
= NULL
;
1979 if (buffer_info
->skb
) {
1980 dev_kfree_skb(buffer_info
->skb
);
1981 buffer_info
->skb
= NULL
;
1985 /* there also may be some cached data from a chained receive */
1986 if (rx_ring
->rx_skb_top
) {
1987 dev_kfree_skb(rx_ring
->rx_skb_top
);
1988 rx_ring
->rx_skb_top
= NULL
;
1991 size
= sizeof(struct e1000_buffer
) * rx_ring
->count
;
1992 memset(rx_ring
->buffer_info
, 0, size
);
1994 /* Zero out the descriptor ring */
1995 memset(rx_ring
->desc
, 0, rx_ring
->size
);
1997 rx_ring
->next_to_clean
= 0;
1998 rx_ring
->next_to_use
= 0;
2000 writel(0, hw
->hw_addr
+ rx_ring
->rdh
);
2001 writel(0, hw
->hw_addr
+ rx_ring
->rdt
);
2005 * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2006 * @adapter: board private structure
2009 static void e1000_clean_all_rx_rings(struct e1000_adapter
*adapter
)
2013 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2014 e1000_clean_rx_ring(adapter
, &adapter
->rx_ring
[i
]);
2017 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2018 * and memory write and invalidate disabled for certain operations
2020 static void e1000_enter_82542_rst(struct e1000_adapter
*adapter
)
2022 struct e1000_hw
*hw
= &adapter
->hw
;
2023 struct net_device
*netdev
= adapter
->netdev
;
2026 e1000_pci_clear_mwi(hw
);
2029 rctl
|= E1000_RCTL_RST
;
2031 E1000_WRITE_FLUSH();
2034 if (netif_running(netdev
))
2035 e1000_clean_all_rx_rings(adapter
);
2038 static void e1000_leave_82542_rst(struct e1000_adapter
*adapter
)
2040 struct e1000_hw
*hw
= &adapter
->hw
;
2041 struct net_device
*netdev
= adapter
->netdev
;
2045 rctl
&= ~E1000_RCTL_RST
;
2047 E1000_WRITE_FLUSH();
2050 if (hw
->pci_cmd_word
& PCI_COMMAND_INVALIDATE
)
2051 e1000_pci_set_mwi(hw
);
2053 if (netif_running(netdev
)) {
2054 /* No need to loop, because 82542 supports only 1 queue */
2055 struct e1000_rx_ring
*ring
= &adapter
->rx_ring
[0];
2056 e1000_configure_rx(adapter
);
2057 adapter
->alloc_rx_buf(adapter
, ring
, E1000_DESC_UNUSED(ring
));
2062 * e1000_set_mac - Change the Ethernet Address of the NIC
2063 * @netdev: network interface device structure
2064 * @p: pointer to an address structure
2066 * Returns 0 on success, negative on failure
2069 static int e1000_set_mac(struct net_device
*netdev
, void *p
)
2071 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2072 struct e1000_hw
*hw
= &adapter
->hw
;
2073 struct sockaddr
*addr
= p
;
2075 if (!is_valid_ether_addr(addr
->sa_data
))
2076 return -EADDRNOTAVAIL
;
2078 /* 82542 2.0 needs to be in reset to write receive address registers */
2080 if (hw
->mac_type
== e1000_82542_rev2_0
)
2081 e1000_enter_82542_rst(adapter
);
2083 memcpy(netdev
->dev_addr
, addr
->sa_data
, netdev
->addr_len
);
2084 memcpy(hw
->mac_addr
, addr
->sa_data
, netdev
->addr_len
);
2086 e1000_rar_set(hw
, hw
->mac_addr
, 0);
2088 if (hw
->mac_type
== e1000_82542_rev2_0
)
2089 e1000_leave_82542_rst(adapter
);
2095 * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
2096 * @netdev: network interface device structure
2098 * The set_rx_mode entry point is called whenever the unicast or multicast
2099 * address lists or the network interface flags are updated. This routine is
2100 * responsible for configuring the hardware for proper unicast, multicast,
2101 * promiscuous mode, and all-multi behavior.
2104 static void e1000_set_rx_mode(struct net_device
*netdev
)
2106 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2107 struct e1000_hw
*hw
= &adapter
->hw
;
2108 struct netdev_hw_addr
*ha
;
2109 bool use_uc
= false;
2112 int i
, rar_entries
= E1000_RAR_ENTRIES
;
2113 int mta_reg_count
= E1000_NUM_MTA_REGISTERS
;
2114 u32
*mcarray
= kcalloc(mta_reg_count
, sizeof(u32
), GFP_ATOMIC
);
2117 e_err(probe
, "memory allocation failed\n");
2121 /* Check for Promiscuous and All Multicast modes */
2125 if (netdev
->flags
& IFF_PROMISC
) {
2126 rctl
|= (E1000_RCTL_UPE
| E1000_RCTL_MPE
);
2127 rctl
&= ~E1000_RCTL_VFE
;
2129 if (netdev
->flags
& IFF_ALLMULTI
)
2130 rctl
|= E1000_RCTL_MPE
;
2132 rctl
&= ~E1000_RCTL_MPE
;
2133 /* Enable VLAN filter if there is a VLAN */
2135 rctl
|= E1000_RCTL_VFE
;
2138 if (netdev_uc_count(netdev
) > rar_entries
- 1) {
2139 rctl
|= E1000_RCTL_UPE
;
2140 } else if (!(netdev
->flags
& IFF_PROMISC
)) {
2141 rctl
&= ~E1000_RCTL_UPE
;
2147 /* 82542 2.0 needs to be in reset to write receive address registers */
2149 if (hw
->mac_type
== e1000_82542_rev2_0
)
2150 e1000_enter_82542_rst(adapter
);
2152 /* load the first 14 addresses into the exact filters 1-14. Unicast
2153 * addresses take precedence to avoid disabling unicast filtering
2156 * RAR 0 is used for the station MAC adddress
2157 * if there are not 14 addresses, go ahead and clear the filters
2161 netdev_for_each_uc_addr(ha
, netdev
) {
2162 if (i
== rar_entries
)
2164 e1000_rar_set(hw
, ha
->addr
, i
++);
2167 netdev_for_each_mc_addr(ha
, netdev
) {
2168 if (i
== rar_entries
) {
2169 /* load any remaining addresses into the hash table */
2170 u32 hash_reg
, hash_bit
, mta
;
2171 hash_value
= e1000_hash_mc_addr(hw
, ha
->addr
);
2172 hash_reg
= (hash_value
>> 5) & 0x7F;
2173 hash_bit
= hash_value
& 0x1F;
2174 mta
= (1 << hash_bit
);
2175 mcarray
[hash_reg
] |= mta
;
2177 e1000_rar_set(hw
, ha
->addr
, i
++);
2181 for (; i
< rar_entries
; i
++) {
2182 E1000_WRITE_REG_ARRAY(hw
, RA
, i
<< 1, 0);
2183 E1000_WRITE_FLUSH();
2184 E1000_WRITE_REG_ARRAY(hw
, RA
, (i
<< 1) + 1, 0);
2185 E1000_WRITE_FLUSH();
2188 /* write the hash table completely, write from bottom to avoid
2189 * both stupid write combining chipsets, and flushing each write */
2190 for (i
= mta_reg_count
- 1; i
>= 0 ; i
--) {
2192 * If we are on an 82544 has an errata where writing odd
2193 * offsets overwrites the previous even offset, but writing
2194 * backwards over the range solves the issue by always
2195 * writing the odd offset first
2197 E1000_WRITE_REG_ARRAY(hw
, MTA
, i
, mcarray
[i
]);
2199 E1000_WRITE_FLUSH();
2201 if (hw
->mac_type
== e1000_82542_rev2_0
)
2202 e1000_leave_82542_rst(adapter
);
2207 /* Need to wait a few seconds after link up to get diagnostic information from
2210 static void e1000_update_phy_info(unsigned long data
)
2212 struct e1000_adapter
*adapter
= (struct e1000_adapter
*)data
;
2213 struct e1000_hw
*hw
= &adapter
->hw
;
2214 e1000_phy_get_info(hw
, &adapter
->phy_info
);
2218 * e1000_82547_tx_fifo_stall - Timer Call-back
2219 * @data: pointer to adapter cast into an unsigned long
2222 static void e1000_82547_tx_fifo_stall(unsigned long data
)
2224 struct e1000_adapter
*adapter
= (struct e1000_adapter
*)data
;
2225 struct e1000_hw
*hw
= &adapter
->hw
;
2226 struct net_device
*netdev
= adapter
->netdev
;
2229 if (atomic_read(&adapter
->tx_fifo_stall
)) {
2230 if ((er32(TDT
) == er32(TDH
)) &&
2231 (er32(TDFT
) == er32(TDFH
)) &&
2232 (er32(TDFTS
) == er32(TDFHS
))) {
2234 ew32(TCTL
, tctl
& ~E1000_TCTL_EN
);
2235 ew32(TDFT
, adapter
->tx_head_addr
);
2236 ew32(TDFH
, adapter
->tx_head_addr
);
2237 ew32(TDFTS
, adapter
->tx_head_addr
);
2238 ew32(TDFHS
, adapter
->tx_head_addr
);
2240 E1000_WRITE_FLUSH();
2242 adapter
->tx_fifo_head
= 0;
2243 atomic_set(&adapter
->tx_fifo_stall
, 0);
2244 netif_wake_queue(netdev
);
2245 } else if (!test_bit(__E1000_DOWN
, &adapter
->flags
)) {
2246 mod_timer(&adapter
->tx_fifo_stall_timer
, jiffies
+ 1);
2251 bool e1000_has_link(struct e1000_adapter
*adapter
)
2253 struct e1000_hw
*hw
= &adapter
->hw
;
2254 bool link_active
= false;
2256 /* get_link_status is set on LSC (link status) interrupt or
2257 * rx sequence error interrupt. get_link_status will stay
2258 * false until the e1000_check_for_link establishes link
2259 * for copper adapters ONLY
2261 switch (hw
->media_type
) {
2262 case e1000_media_type_copper
:
2263 if (hw
->get_link_status
) {
2264 e1000_check_for_link(hw
);
2265 link_active
= !hw
->get_link_status
;
2270 case e1000_media_type_fiber
:
2271 e1000_check_for_link(hw
);
2272 link_active
= !!(er32(STATUS
) & E1000_STATUS_LU
);
2274 case e1000_media_type_internal_serdes
:
2275 e1000_check_for_link(hw
);
2276 link_active
= hw
->serdes_has_link
;
2286 * e1000_watchdog - Timer Call-back
2287 * @data: pointer to adapter cast into an unsigned long
2289 static void e1000_watchdog(unsigned long data
)
2291 struct e1000_adapter
*adapter
= (struct e1000_adapter
*)data
;
2292 struct e1000_hw
*hw
= &adapter
->hw
;
2293 struct net_device
*netdev
= adapter
->netdev
;
2294 struct e1000_tx_ring
*txdr
= adapter
->tx_ring
;
2297 link
= e1000_has_link(adapter
);
2298 if ((netif_carrier_ok(netdev
)) && link
)
2302 if (!netif_carrier_ok(netdev
)) {
2305 /* update snapshot of PHY registers on LSC */
2306 e1000_get_speed_and_duplex(hw
,
2307 &adapter
->link_speed
,
2308 &adapter
->link_duplex
);
2311 pr_info("%s NIC Link is Up %d Mbps %s, "
2312 "Flow Control: %s\n",
2314 adapter
->link_speed
,
2315 adapter
->link_duplex
== FULL_DUPLEX
?
2316 "Full Duplex" : "Half Duplex",
2317 ((ctrl
& E1000_CTRL_TFCE
) && (ctrl
&
2318 E1000_CTRL_RFCE
)) ? "RX/TX" : ((ctrl
&
2319 E1000_CTRL_RFCE
) ? "RX" : ((ctrl
&
2320 E1000_CTRL_TFCE
) ? "TX" : "None")));
2322 /* adjust timeout factor according to speed/duplex */
2323 adapter
->tx_timeout_factor
= 1;
2324 switch (adapter
->link_speed
) {
2327 adapter
->tx_timeout_factor
= 16;
2331 /* maybe add some timeout factor ? */
2335 /* enable transmits in the hardware */
2337 tctl
|= E1000_TCTL_EN
;
2340 netif_carrier_on(netdev
);
2341 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
2342 mod_timer(&adapter
->phy_info_timer
,
2343 round_jiffies(jiffies
+ 2 * HZ
));
2344 adapter
->smartspeed
= 0;
2347 if (netif_carrier_ok(netdev
)) {
2348 adapter
->link_speed
= 0;
2349 adapter
->link_duplex
= 0;
2350 pr_info("%s NIC Link is Down\n",
2352 netif_carrier_off(netdev
);
2354 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
2355 mod_timer(&adapter
->phy_info_timer
,
2356 round_jiffies(jiffies
+ 2 * HZ
));
2359 e1000_smartspeed(adapter
);
2363 e1000_update_stats(adapter
);
2365 hw
->tx_packet_delta
= adapter
->stats
.tpt
- adapter
->tpt_old
;
2366 adapter
->tpt_old
= adapter
->stats
.tpt
;
2367 hw
->collision_delta
= adapter
->stats
.colc
- adapter
->colc_old
;
2368 adapter
->colc_old
= adapter
->stats
.colc
;
2370 adapter
->gorcl
= adapter
->stats
.gorcl
- adapter
->gorcl_old
;
2371 adapter
->gorcl_old
= adapter
->stats
.gorcl
;
2372 adapter
->gotcl
= adapter
->stats
.gotcl
- adapter
->gotcl_old
;
2373 adapter
->gotcl_old
= adapter
->stats
.gotcl
;
2375 e1000_update_adaptive(hw
);
2377 if (!netif_carrier_ok(netdev
)) {
2378 if (E1000_DESC_UNUSED(txdr
) + 1 < txdr
->count
) {
2379 /* We've lost link, so the controller stops DMA,
2380 * but we've got queued Tx work that's never going
2381 * to get done, so reset controller to flush Tx.
2382 * (Do the reset outside of interrupt context). */
2383 adapter
->tx_timeout_count
++;
2384 schedule_work(&adapter
->reset_task
);
2385 /* return immediately since reset is imminent */
2390 /* Simple mode for Interrupt Throttle Rate (ITR) */
2391 if (hw
->mac_type
>= e1000_82540
&& adapter
->itr_setting
== 4) {
2393 * Symmetric Tx/Rx gets a reduced ITR=2000;
2394 * Total asymmetrical Tx or Rx gets ITR=8000;
2395 * everyone else is between 2000-8000.
2397 u32 goc
= (adapter
->gotcl
+ adapter
->gorcl
) / 10000;
2398 u32 dif
= (adapter
->gotcl
> adapter
->gorcl
?
2399 adapter
->gotcl
- adapter
->gorcl
:
2400 adapter
->gorcl
- adapter
->gotcl
) / 10000;
2401 u32 itr
= goc
> 0 ? (dif
* 6000 / goc
+ 2000) : 8000;
2403 ew32(ITR
, 1000000000 / (itr
* 256));
2406 /* Cause software interrupt to ensure rx ring is cleaned */
2407 ew32(ICS
, E1000_ICS_RXDMT0
);
2409 /* Force detection of hung controller every watchdog period */
2410 adapter
->detect_tx_hung
= true;
2412 /* Reset the timer */
2413 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
2414 mod_timer(&adapter
->watchdog_timer
,
2415 round_jiffies(jiffies
+ 2 * HZ
));
2418 enum latency_range
{
2422 latency_invalid
= 255
2426 * e1000_update_itr - update the dynamic ITR value based on statistics
2427 * @adapter: pointer to adapter
2428 * @itr_setting: current adapter->itr
2429 * @packets: the number of packets during this measurement interval
2430 * @bytes: the number of bytes during this measurement interval
2432 * Stores a new ITR value based on packets and byte
2433 * counts during the last interrupt. The advantage of per interrupt
2434 * computation is faster updates and more accurate ITR for the current
2435 * traffic pattern. Constants in this function were computed
2436 * based on theoretical maximum wire speed and thresholds were set based
2437 * on testing data as well as attempting to minimize response time
2438 * while increasing bulk throughput.
2439 * this functionality is controlled by the InterruptThrottleRate module
2440 * parameter (see e1000_param.c)
2442 static unsigned int e1000_update_itr(struct e1000_adapter
*adapter
,
2443 u16 itr_setting
, int packets
, int bytes
)
2445 unsigned int retval
= itr_setting
;
2446 struct e1000_hw
*hw
= &adapter
->hw
;
2448 if (unlikely(hw
->mac_type
< e1000_82540
))
2449 goto update_itr_done
;
2452 goto update_itr_done
;
2454 switch (itr_setting
) {
2455 case lowest_latency
:
2456 /* jumbo frames get bulk treatment*/
2457 if (bytes
/packets
> 8000)
2458 retval
= bulk_latency
;
2459 else if ((packets
< 5) && (bytes
> 512))
2460 retval
= low_latency
;
2462 case low_latency
: /* 50 usec aka 20000 ints/s */
2463 if (bytes
> 10000) {
2464 /* jumbo frames need bulk latency setting */
2465 if (bytes
/packets
> 8000)
2466 retval
= bulk_latency
;
2467 else if ((packets
< 10) || ((bytes
/packets
) > 1200))
2468 retval
= bulk_latency
;
2469 else if ((packets
> 35))
2470 retval
= lowest_latency
;
2471 } else if (bytes
/packets
> 2000)
2472 retval
= bulk_latency
;
2473 else if (packets
<= 2 && bytes
< 512)
2474 retval
= lowest_latency
;
2476 case bulk_latency
: /* 250 usec aka 4000 ints/s */
2477 if (bytes
> 25000) {
2479 retval
= low_latency
;
2480 } else if (bytes
< 6000) {
2481 retval
= low_latency
;
2490 static void e1000_set_itr(struct e1000_adapter
*adapter
)
2492 struct e1000_hw
*hw
= &adapter
->hw
;
2494 u32 new_itr
= adapter
->itr
;
2496 if (unlikely(hw
->mac_type
< e1000_82540
))
2499 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2500 if (unlikely(adapter
->link_speed
!= SPEED_1000
)) {
2506 adapter
->tx_itr
= e1000_update_itr(adapter
,
2508 adapter
->total_tx_packets
,
2509 adapter
->total_tx_bytes
);
2510 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2511 if (adapter
->itr_setting
== 3 && adapter
->tx_itr
== lowest_latency
)
2512 adapter
->tx_itr
= low_latency
;
2514 adapter
->rx_itr
= e1000_update_itr(adapter
,
2516 adapter
->total_rx_packets
,
2517 adapter
->total_rx_bytes
);
2518 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2519 if (adapter
->itr_setting
== 3 && adapter
->rx_itr
== lowest_latency
)
2520 adapter
->rx_itr
= low_latency
;
2522 current_itr
= max(adapter
->rx_itr
, adapter
->tx_itr
);
2524 switch (current_itr
) {
2525 /* counts and packets in update_itr are dependent on these numbers */
2526 case lowest_latency
:
2530 new_itr
= 20000; /* aka hwitr = ~200 */
2540 if (new_itr
!= adapter
->itr
) {
2541 /* this attempts to bias the interrupt rate towards Bulk
2542 * by adding intermediate steps when interrupt rate is
2544 new_itr
= new_itr
> adapter
->itr
?
2545 min(adapter
->itr
+ (new_itr
>> 2), new_itr
) :
2547 adapter
->itr
= new_itr
;
2548 ew32(ITR
, 1000000000 / (new_itr
* 256));
2552 #define E1000_TX_FLAGS_CSUM 0x00000001
2553 #define E1000_TX_FLAGS_VLAN 0x00000002
2554 #define E1000_TX_FLAGS_TSO 0x00000004
2555 #define E1000_TX_FLAGS_IPV4 0x00000008
2556 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
2557 #define E1000_TX_FLAGS_VLAN_SHIFT 16
2559 static int e1000_tso(struct e1000_adapter
*adapter
,
2560 struct e1000_tx_ring
*tx_ring
, struct sk_buff
*skb
)
2562 struct e1000_context_desc
*context_desc
;
2563 struct e1000_buffer
*buffer_info
;
2566 u16 ipcse
= 0, tucse
, mss
;
2567 u8 ipcss
, ipcso
, tucss
, tucso
, hdr_len
;
2570 if (skb_is_gso(skb
)) {
2571 if (skb_header_cloned(skb
)) {
2572 err
= pskb_expand_head(skb
, 0, 0, GFP_ATOMIC
);
2577 hdr_len
= skb_transport_offset(skb
) + tcp_hdrlen(skb
);
2578 mss
= skb_shinfo(skb
)->gso_size
;
2579 if (skb
->protocol
== htons(ETH_P_IP
)) {
2580 struct iphdr
*iph
= ip_hdr(skb
);
2583 tcp_hdr(skb
)->check
= ~csum_tcpudp_magic(iph
->saddr
,
2587 cmd_length
= E1000_TXD_CMD_IP
;
2588 ipcse
= skb_transport_offset(skb
) - 1;
2589 } else if (skb
->protocol
== htons(ETH_P_IPV6
)) {
2590 ipv6_hdr(skb
)->payload_len
= 0;
2591 tcp_hdr(skb
)->check
=
2592 ~csum_ipv6_magic(&ipv6_hdr(skb
)->saddr
,
2593 &ipv6_hdr(skb
)->daddr
,
2597 ipcss
= skb_network_offset(skb
);
2598 ipcso
= (void *)&(ip_hdr(skb
)->check
) - (void *)skb
->data
;
2599 tucss
= skb_transport_offset(skb
);
2600 tucso
= (void *)&(tcp_hdr(skb
)->check
) - (void *)skb
->data
;
2603 cmd_length
|= (E1000_TXD_CMD_DEXT
| E1000_TXD_CMD_TSE
|
2604 E1000_TXD_CMD_TCP
| (skb
->len
- (hdr_len
)));
2606 i
= tx_ring
->next_to_use
;
2607 context_desc
= E1000_CONTEXT_DESC(*tx_ring
, i
);
2608 buffer_info
= &tx_ring
->buffer_info
[i
];
2610 context_desc
->lower_setup
.ip_fields
.ipcss
= ipcss
;
2611 context_desc
->lower_setup
.ip_fields
.ipcso
= ipcso
;
2612 context_desc
->lower_setup
.ip_fields
.ipcse
= cpu_to_le16(ipcse
);
2613 context_desc
->upper_setup
.tcp_fields
.tucss
= tucss
;
2614 context_desc
->upper_setup
.tcp_fields
.tucso
= tucso
;
2615 context_desc
->upper_setup
.tcp_fields
.tucse
= cpu_to_le16(tucse
);
2616 context_desc
->tcp_seg_setup
.fields
.mss
= cpu_to_le16(mss
);
2617 context_desc
->tcp_seg_setup
.fields
.hdr_len
= hdr_len
;
2618 context_desc
->cmd_and_length
= cpu_to_le32(cmd_length
);
2620 buffer_info
->time_stamp
= jiffies
;
2621 buffer_info
->next_to_watch
= i
;
2623 if (++i
== tx_ring
->count
) i
= 0;
2624 tx_ring
->next_to_use
= i
;
2631 static bool e1000_tx_csum(struct e1000_adapter
*adapter
,
2632 struct e1000_tx_ring
*tx_ring
, struct sk_buff
*skb
)
2634 struct e1000_context_desc
*context_desc
;
2635 struct e1000_buffer
*buffer_info
;
2638 u32 cmd_len
= E1000_TXD_CMD_DEXT
;
2640 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
)
2643 switch (skb
->protocol
) {
2644 case cpu_to_be16(ETH_P_IP
):
2645 if (ip_hdr(skb
)->protocol
== IPPROTO_TCP
)
2646 cmd_len
|= E1000_TXD_CMD_TCP
;
2648 case cpu_to_be16(ETH_P_IPV6
):
2649 /* XXX not handling all IPV6 headers */
2650 if (ipv6_hdr(skb
)->nexthdr
== IPPROTO_TCP
)
2651 cmd_len
|= E1000_TXD_CMD_TCP
;
2654 if (unlikely(net_ratelimit()))
2655 e_warn(drv
, "checksum_partial proto=%x!\n",
2660 css
= skb_transport_offset(skb
);
2662 i
= tx_ring
->next_to_use
;
2663 buffer_info
= &tx_ring
->buffer_info
[i
];
2664 context_desc
= E1000_CONTEXT_DESC(*tx_ring
, i
);
2666 context_desc
->lower_setup
.ip_config
= 0;
2667 context_desc
->upper_setup
.tcp_fields
.tucss
= css
;
2668 context_desc
->upper_setup
.tcp_fields
.tucso
=
2669 css
+ skb
->csum_offset
;
2670 context_desc
->upper_setup
.tcp_fields
.tucse
= 0;
2671 context_desc
->tcp_seg_setup
.data
= 0;
2672 context_desc
->cmd_and_length
= cpu_to_le32(cmd_len
);
2674 buffer_info
->time_stamp
= jiffies
;
2675 buffer_info
->next_to_watch
= i
;
2677 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
2678 tx_ring
->next_to_use
= i
;
2683 #define E1000_MAX_TXD_PWR 12
2684 #define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
2686 static int e1000_tx_map(struct e1000_adapter
*adapter
,
2687 struct e1000_tx_ring
*tx_ring
,
2688 struct sk_buff
*skb
, unsigned int first
,
2689 unsigned int max_per_txd
, unsigned int nr_frags
,
2692 struct e1000_hw
*hw
= &adapter
->hw
;
2693 struct pci_dev
*pdev
= adapter
->pdev
;
2694 struct e1000_buffer
*buffer_info
;
2695 unsigned int len
= skb_headlen(skb
);
2696 unsigned int offset
= 0, size
, count
= 0, i
;
2699 i
= tx_ring
->next_to_use
;
2702 buffer_info
= &tx_ring
->buffer_info
[i
];
2703 size
= min(len
, max_per_txd
);
2704 /* Workaround for Controller erratum --
2705 * descriptor for non-tso packet in a linear SKB that follows a
2706 * tso gets written back prematurely before the data is fully
2707 * DMA'd to the controller */
2708 if (!skb
->data_len
&& tx_ring
->last_tx_tso
&&
2710 tx_ring
->last_tx_tso
= 0;
2714 /* Workaround for premature desc write-backs
2715 * in TSO mode. Append 4-byte sentinel desc */
2716 if (unlikely(mss
&& !nr_frags
&& size
== len
&& size
> 8))
2718 /* work-around for errata 10 and it applies
2719 * to all controllers in PCI-X mode
2720 * The fix is to make sure that the first descriptor of a
2721 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2723 if (unlikely((hw
->bus_type
== e1000_bus_type_pcix
) &&
2724 (size
> 2015) && count
== 0))
2727 /* Workaround for potential 82544 hang in PCI-X. Avoid
2728 * terminating buffers within evenly-aligned dwords. */
2729 if (unlikely(adapter
->pcix_82544
&&
2730 !((unsigned long)(skb
->data
+ offset
+ size
- 1) & 4) &&
2734 buffer_info
->length
= size
;
2735 /* set time_stamp *before* dma to help avoid a possible race */
2736 buffer_info
->time_stamp
= jiffies
;
2737 buffer_info
->mapped_as_page
= false;
2738 buffer_info
->dma
= dma_map_single(&pdev
->dev
,
2740 size
, DMA_TO_DEVICE
);
2741 if (dma_mapping_error(&pdev
->dev
, buffer_info
->dma
))
2743 buffer_info
->next_to_watch
= i
;
2750 if (unlikely(i
== tx_ring
->count
))
2755 for (f
= 0; f
< nr_frags
; f
++) {
2756 struct skb_frag_struct
*frag
;
2758 frag
= &skb_shinfo(skb
)->frags
[f
];
2760 offset
= frag
->page_offset
;
2764 if (unlikely(i
== tx_ring
->count
))
2767 buffer_info
= &tx_ring
->buffer_info
[i
];
2768 size
= min(len
, max_per_txd
);
2769 /* Workaround for premature desc write-backs
2770 * in TSO mode. Append 4-byte sentinel desc */
2771 if (unlikely(mss
&& f
== (nr_frags
-1) && size
== len
&& size
> 8))
2773 /* Workaround for potential 82544 hang in PCI-X.
2774 * Avoid terminating buffers within evenly-aligned
2776 if (unlikely(adapter
->pcix_82544
&&
2777 !((unsigned long)(page_to_phys(frag
->page
) + offset
2782 buffer_info
->length
= size
;
2783 buffer_info
->time_stamp
= jiffies
;
2784 buffer_info
->mapped_as_page
= true;
2785 buffer_info
->dma
= dma_map_page(&pdev
->dev
, frag
->page
,
2788 if (dma_mapping_error(&pdev
->dev
, buffer_info
->dma
))
2790 buffer_info
->next_to_watch
= i
;
2798 tx_ring
->buffer_info
[i
].skb
= skb
;
2799 tx_ring
->buffer_info
[first
].next_to_watch
= i
;
2804 dev_err(&pdev
->dev
, "TX DMA map failed\n");
2805 buffer_info
->dma
= 0;
2811 i
+= tx_ring
->count
;
2813 buffer_info
= &tx_ring
->buffer_info
[i
];
2814 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
2820 static void e1000_tx_queue(struct e1000_adapter
*adapter
,
2821 struct e1000_tx_ring
*tx_ring
, int tx_flags
,
2824 struct e1000_hw
*hw
= &adapter
->hw
;
2825 struct e1000_tx_desc
*tx_desc
= NULL
;
2826 struct e1000_buffer
*buffer_info
;
2827 u32 txd_upper
= 0, txd_lower
= E1000_TXD_CMD_IFCS
;
2830 if (likely(tx_flags
& E1000_TX_FLAGS_TSO
)) {
2831 txd_lower
|= E1000_TXD_CMD_DEXT
| E1000_TXD_DTYP_D
|
2833 txd_upper
|= E1000_TXD_POPTS_TXSM
<< 8;
2835 if (likely(tx_flags
& E1000_TX_FLAGS_IPV4
))
2836 txd_upper
|= E1000_TXD_POPTS_IXSM
<< 8;
2839 if (likely(tx_flags
& E1000_TX_FLAGS_CSUM
)) {
2840 txd_lower
|= E1000_TXD_CMD_DEXT
| E1000_TXD_DTYP_D
;
2841 txd_upper
|= E1000_TXD_POPTS_TXSM
<< 8;
2844 if (unlikely(tx_flags
& E1000_TX_FLAGS_VLAN
)) {
2845 txd_lower
|= E1000_TXD_CMD_VLE
;
2846 txd_upper
|= (tx_flags
& E1000_TX_FLAGS_VLAN_MASK
);
2849 i
= tx_ring
->next_to_use
;
2852 buffer_info
= &tx_ring
->buffer_info
[i
];
2853 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
2854 tx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
2855 tx_desc
->lower
.data
=
2856 cpu_to_le32(txd_lower
| buffer_info
->length
);
2857 tx_desc
->upper
.data
= cpu_to_le32(txd_upper
);
2858 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
2861 tx_desc
->lower
.data
|= cpu_to_le32(adapter
->txd_cmd
);
2863 /* Force memory writes to complete before letting h/w
2864 * know there are new descriptors to fetch. (Only
2865 * applicable for weak-ordered memory model archs,
2866 * such as IA-64). */
2869 tx_ring
->next_to_use
= i
;
2870 writel(i
, hw
->hw_addr
+ tx_ring
->tdt
);
2871 /* we need this if more than one processor can write to our tail
2872 * at a time, it syncronizes IO on IA64/Altix systems */
2877 * 82547 workaround to avoid controller hang in half-duplex environment.
2878 * The workaround is to avoid queuing a large packet that would span
2879 * the internal Tx FIFO ring boundary by notifying the stack to resend
2880 * the packet at a later time. This gives the Tx FIFO an opportunity to
2881 * flush all packets. When that occurs, we reset the Tx FIFO pointers
2882 * to the beginning of the Tx FIFO.
2885 #define E1000_FIFO_HDR 0x10
2886 #define E1000_82547_PAD_LEN 0x3E0
2888 static int e1000_82547_fifo_workaround(struct e1000_adapter
*adapter
,
2889 struct sk_buff
*skb
)
2891 u32 fifo_space
= adapter
->tx_fifo_size
- adapter
->tx_fifo_head
;
2892 u32 skb_fifo_len
= skb
->len
+ E1000_FIFO_HDR
;
2894 skb_fifo_len
= ALIGN(skb_fifo_len
, E1000_FIFO_HDR
);
2896 if (adapter
->link_duplex
!= HALF_DUPLEX
)
2897 goto no_fifo_stall_required
;
2899 if (atomic_read(&adapter
->tx_fifo_stall
))
2902 if (skb_fifo_len
>= (E1000_82547_PAD_LEN
+ fifo_space
)) {
2903 atomic_set(&adapter
->tx_fifo_stall
, 1);
2907 no_fifo_stall_required
:
2908 adapter
->tx_fifo_head
+= skb_fifo_len
;
2909 if (adapter
->tx_fifo_head
>= adapter
->tx_fifo_size
)
2910 adapter
->tx_fifo_head
-= adapter
->tx_fifo_size
;
2914 static int __e1000_maybe_stop_tx(struct net_device
*netdev
, int size
)
2916 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2917 struct e1000_tx_ring
*tx_ring
= adapter
->tx_ring
;
2919 netif_stop_queue(netdev
);
2920 /* Herbert's original patch had:
2921 * smp_mb__after_netif_stop_queue();
2922 * but since that doesn't exist yet, just open code it. */
2925 /* We need to check again in a case another CPU has just
2926 * made room available. */
2927 if (likely(E1000_DESC_UNUSED(tx_ring
) < size
))
2931 netif_start_queue(netdev
);
2932 ++adapter
->restart_queue
;
2936 static int e1000_maybe_stop_tx(struct net_device
*netdev
,
2937 struct e1000_tx_ring
*tx_ring
, int size
)
2939 if (likely(E1000_DESC_UNUSED(tx_ring
) >= size
))
2941 return __e1000_maybe_stop_tx(netdev
, size
);
2944 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
2945 static netdev_tx_t
e1000_xmit_frame(struct sk_buff
*skb
,
2946 struct net_device
*netdev
)
2948 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2949 struct e1000_hw
*hw
= &adapter
->hw
;
2950 struct e1000_tx_ring
*tx_ring
;
2951 unsigned int first
, max_per_txd
= E1000_MAX_DATA_PER_TXD
;
2952 unsigned int max_txd_pwr
= E1000_MAX_TXD_PWR
;
2953 unsigned int tx_flags
= 0;
2954 unsigned int len
= skb_headlen(skb
);
2955 unsigned int nr_frags
;
2961 /* This goes back to the question of how to logically map a tx queue
2962 * to a flow. Right now, performance is impacted slightly negatively
2963 * if using multiple tx queues. If the stack breaks away from a
2964 * single qdisc implementation, we can look at this again. */
2965 tx_ring
= adapter
->tx_ring
;
2967 if (unlikely(skb
->len
<= 0)) {
2968 dev_kfree_skb_any(skb
);
2969 return NETDEV_TX_OK
;
2972 mss
= skb_shinfo(skb
)->gso_size
;
2973 /* The controller does a simple calculation to
2974 * make sure there is enough room in the FIFO before
2975 * initiating the DMA for each buffer. The calc is:
2976 * 4 = ceil(buffer len/mss). To make sure we don't
2977 * overrun the FIFO, adjust the max buffer len if mss
2981 max_per_txd
= min(mss
<< 2, max_per_txd
);
2982 max_txd_pwr
= fls(max_per_txd
) - 1;
2984 hdr_len
= skb_transport_offset(skb
) + tcp_hdrlen(skb
);
2985 if (skb
->data_len
&& hdr_len
== len
) {
2986 switch (hw
->mac_type
) {
2987 unsigned int pull_size
;
2989 /* Make sure we have room to chop off 4 bytes,
2990 * and that the end alignment will work out to
2991 * this hardware's requirements
2992 * NOTE: this is a TSO only workaround
2993 * if end byte alignment not correct move us
2994 * into the next dword */
2995 if ((unsigned long)(skb_tail_pointer(skb
) - 1) & 4)
2998 pull_size
= min((unsigned int)4, skb
->data_len
);
2999 if (!__pskb_pull_tail(skb
, pull_size
)) {
3000 e_err(drv
, "__pskb_pull_tail "
3002 dev_kfree_skb_any(skb
);
3003 return NETDEV_TX_OK
;
3005 len
= skb_headlen(skb
);
3014 /* reserve a descriptor for the offload context */
3015 if ((mss
) || (skb
->ip_summed
== CHECKSUM_PARTIAL
))
3019 /* Controller Erratum workaround */
3020 if (!skb
->data_len
&& tx_ring
->last_tx_tso
&& !skb_is_gso(skb
))
3023 count
+= TXD_USE_COUNT(len
, max_txd_pwr
);
3025 if (adapter
->pcix_82544
)
3028 /* work-around for errata 10 and it applies to all controllers
3029 * in PCI-X mode, so add one more descriptor to the count
3031 if (unlikely((hw
->bus_type
== e1000_bus_type_pcix
) &&
3035 nr_frags
= skb_shinfo(skb
)->nr_frags
;
3036 for (f
= 0; f
< nr_frags
; f
++)
3037 count
+= TXD_USE_COUNT(skb_shinfo(skb
)->frags
[f
].size
,
3039 if (adapter
->pcix_82544
)
3042 /* need: count + 2 desc gap to keep tail from touching
3043 * head, otherwise try next time */
3044 if (unlikely(e1000_maybe_stop_tx(netdev
, tx_ring
, count
+ 2)))
3045 return NETDEV_TX_BUSY
;
3047 if (unlikely(hw
->mac_type
== e1000_82547
)) {
3048 if (unlikely(e1000_82547_fifo_workaround(adapter
, skb
))) {
3049 netif_stop_queue(netdev
);
3050 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3051 mod_timer(&adapter
->tx_fifo_stall_timer
,
3053 return NETDEV_TX_BUSY
;
3057 if (unlikely(adapter
->vlgrp
&& vlan_tx_tag_present(skb
))) {
3058 tx_flags
|= E1000_TX_FLAGS_VLAN
;
3059 tx_flags
|= (vlan_tx_tag_get(skb
) << E1000_TX_FLAGS_VLAN_SHIFT
);
3062 first
= tx_ring
->next_to_use
;
3064 tso
= e1000_tso(adapter
, tx_ring
, skb
);
3066 dev_kfree_skb_any(skb
);
3067 return NETDEV_TX_OK
;
3071 if (likely(hw
->mac_type
!= e1000_82544
))
3072 tx_ring
->last_tx_tso
= 1;
3073 tx_flags
|= E1000_TX_FLAGS_TSO
;
3074 } else if (likely(e1000_tx_csum(adapter
, tx_ring
, skb
)))
3075 tx_flags
|= E1000_TX_FLAGS_CSUM
;
3077 if (likely(skb
->protocol
== htons(ETH_P_IP
)))
3078 tx_flags
|= E1000_TX_FLAGS_IPV4
;
3080 count
= e1000_tx_map(adapter
, tx_ring
, skb
, first
, max_per_txd
,
3084 e1000_tx_queue(adapter
, tx_ring
, tx_flags
, count
);
3085 /* Make sure there is space in the ring for the next send. */
3086 e1000_maybe_stop_tx(netdev
, tx_ring
, MAX_SKB_FRAGS
+ 2);
3089 dev_kfree_skb_any(skb
);
3090 tx_ring
->buffer_info
[first
].time_stamp
= 0;
3091 tx_ring
->next_to_use
= first
;
3094 return NETDEV_TX_OK
;
3098 * e1000_tx_timeout - Respond to a Tx Hang
3099 * @netdev: network interface device structure
3102 static void e1000_tx_timeout(struct net_device
*netdev
)
3104 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3106 /* Do the reset outside of interrupt context */
3107 adapter
->tx_timeout_count
++;
3108 schedule_work(&adapter
->reset_task
);
3111 static void e1000_reset_task(struct work_struct
*work
)
3113 struct e1000_adapter
*adapter
=
3114 container_of(work
, struct e1000_adapter
, reset_task
);
3116 e1000_reinit_locked(adapter
);
3120 * e1000_get_stats - Get System Network Statistics
3121 * @netdev: network interface device structure
3123 * Returns the address of the device statistics structure.
3124 * The statistics are actually updated from the timer callback.
3127 static struct net_device_stats
*e1000_get_stats(struct net_device
*netdev
)
3129 /* only return the current stats */
3130 return &netdev
->stats
;
3134 * e1000_change_mtu - Change the Maximum Transfer Unit
3135 * @netdev: network interface device structure
3136 * @new_mtu: new value for maximum frame size
3138 * Returns 0 on success, negative on failure
3141 static int e1000_change_mtu(struct net_device
*netdev
, int new_mtu
)
3143 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3144 struct e1000_hw
*hw
= &adapter
->hw
;
3145 int max_frame
= new_mtu
+ ENET_HEADER_SIZE
+ ETHERNET_FCS_SIZE
;
3147 if ((max_frame
< MINIMUM_ETHERNET_FRAME_SIZE
) ||
3148 (max_frame
> MAX_JUMBO_FRAME_SIZE
)) {
3149 e_err(probe
, "Invalid MTU setting\n");
3153 /* Adapter-specific max frame size limits. */
3154 switch (hw
->mac_type
) {
3155 case e1000_undefined
... e1000_82542_rev2_1
:
3156 if (max_frame
> (ETH_FRAME_LEN
+ ETH_FCS_LEN
)) {
3157 e_err(probe
, "Jumbo Frames not supported.\n");
3162 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3166 while (test_and_set_bit(__E1000_RESETTING
, &adapter
->flags
))
3168 /* e1000_down has a dependency on max_frame_size */
3169 hw
->max_frame_size
= max_frame
;
3170 if (netif_running(netdev
))
3171 e1000_down(adapter
);
3173 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3174 * means we reserve 2 more, this pushes us to allocate from the next
3176 * i.e. RXBUFFER_2048 --> size-4096 slab
3177 * however with the new *_jumbo_rx* routines, jumbo receives will use
3178 * fragmented skbs */
3180 if (max_frame
<= E1000_RXBUFFER_2048
)
3181 adapter
->rx_buffer_len
= E1000_RXBUFFER_2048
;
3183 #if (PAGE_SIZE >= E1000_RXBUFFER_16384)
3184 adapter
->rx_buffer_len
= E1000_RXBUFFER_16384
;
3185 #elif (PAGE_SIZE >= E1000_RXBUFFER_4096)
3186 adapter
->rx_buffer_len
= PAGE_SIZE
;
3189 /* adjust allocation if LPE protects us, and we aren't using SBP */
3190 if (!hw
->tbi_compatibility_on
&&
3191 ((max_frame
== (ETH_FRAME_LEN
+ ETH_FCS_LEN
)) ||
3192 (max_frame
== MAXIMUM_ETHERNET_VLAN_SIZE
)))
3193 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
3195 pr_info("%s changing MTU from %d to %d\n",
3196 netdev
->name
, netdev
->mtu
, new_mtu
);
3197 netdev
->mtu
= new_mtu
;
3199 if (netif_running(netdev
))
3202 e1000_reset(adapter
);
3204 clear_bit(__E1000_RESETTING
, &adapter
->flags
);
3210 * e1000_update_stats - Update the board statistics counters
3211 * @adapter: board private structure
3214 void e1000_update_stats(struct e1000_adapter
*adapter
)
3216 struct net_device
*netdev
= adapter
->netdev
;
3217 struct e1000_hw
*hw
= &adapter
->hw
;
3218 struct pci_dev
*pdev
= adapter
->pdev
;
3219 unsigned long flags
;
3222 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3225 * Prevent stats update while adapter is being reset, or if the pci
3226 * connection is down.
3228 if (adapter
->link_speed
== 0)
3230 if (pci_channel_offline(pdev
))
3233 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
3235 /* these counters are modified from e1000_tbi_adjust_stats,
3236 * called from the interrupt context, so they must only
3237 * be written while holding adapter->stats_lock
3240 adapter
->stats
.crcerrs
+= er32(CRCERRS
);
3241 adapter
->stats
.gprc
+= er32(GPRC
);
3242 adapter
->stats
.gorcl
+= er32(GORCL
);
3243 adapter
->stats
.gorch
+= er32(GORCH
);
3244 adapter
->stats
.bprc
+= er32(BPRC
);
3245 adapter
->stats
.mprc
+= er32(MPRC
);
3246 adapter
->stats
.roc
+= er32(ROC
);
3248 adapter
->stats
.prc64
+= er32(PRC64
);
3249 adapter
->stats
.prc127
+= er32(PRC127
);
3250 adapter
->stats
.prc255
+= er32(PRC255
);
3251 adapter
->stats
.prc511
+= er32(PRC511
);
3252 adapter
->stats
.prc1023
+= er32(PRC1023
);
3253 adapter
->stats
.prc1522
+= er32(PRC1522
);
3255 adapter
->stats
.symerrs
+= er32(SYMERRS
);
3256 adapter
->stats
.mpc
+= er32(MPC
);
3257 adapter
->stats
.scc
+= er32(SCC
);
3258 adapter
->stats
.ecol
+= er32(ECOL
);
3259 adapter
->stats
.mcc
+= er32(MCC
);
3260 adapter
->stats
.latecol
+= er32(LATECOL
);
3261 adapter
->stats
.dc
+= er32(DC
);
3262 adapter
->stats
.sec
+= er32(SEC
);
3263 adapter
->stats
.rlec
+= er32(RLEC
);
3264 adapter
->stats
.xonrxc
+= er32(XONRXC
);
3265 adapter
->stats
.xontxc
+= er32(XONTXC
);
3266 adapter
->stats
.xoffrxc
+= er32(XOFFRXC
);
3267 adapter
->stats
.xofftxc
+= er32(XOFFTXC
);
3268 adapter
->stats
.fcruc
+= er32(FCRUC
);
3269 adapter
->stats
.gptc
+= er32(GPTC
);
3270 adapter
->stats
.gotcl
+= er32(GOTCL
);
3271 adapter
->stats
.gotch
+= er32(GOTCH
);
3272 adapter
->stats
.rnbc
+= er32(RNBC
);
3273 adapter
->stats
.ruc
+= er32(RUC
);
3274 adapter
->stats
.rfc
+= er32(RFC
);
3275 adapter
->stats
.rjc
+= er32(RJC
);
3276 adapter
->stats
.torl
+= er32(TORL
);
3277 adapter
->stats
.torh
+= er32(TORH
);
3278 adapter
->stats
.totl
+= er32(TOTL
);
3279 adapter
->stats
.toth
+= er32(TOTH
);
3280 adapter
->stats
.tpr
+= er32(TPR
);
3282 adapter
->stats
.ptc64
+= er32(PTC64
);
3283 adapter
->stats
.ptc127
+= er32(PTC127
);
3284 adapter
->stats
.ptc255
+= er32(PTC255
);
3285 adapter
->stats
.ptc511
+= er32(PTC511
);
3286 adapter
->stats
.ptc1023
+= er32(PTC1023
);
3287 adapter
->stats
.ptc1522
+= er32(PTC1522
);
3289 adapter
->stats
.mptc
+= er32(MPTC
);
3290 adapter
->stats
.bptc
+= er32(BPTC
);
3292 /* used for adaptive IFS */
3294 hw
->tx_packet_delta
= er32(TPT
);
3295 adapter
->stats
.tpt
+= hw
->tx_packet_delta
;
3296 hw
->collision_delta
= er32(COLC
);
3297 adapter
->stats
.colc
+= hw
->collision_delta
;
3299 if (hw
->mac_type
>= e1000_82543
) {
3300 adapter
->stats
.algnerrc
+= er32(ALGNERRC
);
3301 adapter
->stats
.rxerrc
+= er32(RXERRC
);
3302 adapter
->stats
.tncrs
+= er32(TNCRS
);
3303 adapter
->stats
.cexterr
+= er32(CEXTERR
);
3304 adapter
->stats
.tsctc
+= er32(TSCTC
);
3305 adapter
->stats
.tsctfc
+= er32(TSCTFC
);
3308 /* Fill out the OS statistics structure */
3309 netdev
->stats
.multicast
= adapter
->stats
.mprc
;
3310 netdev
->stats
.collisions
= adapter
->stats
.colc
;
3314 /* RLEC on some newer hardware can be incorrect so build
3315 * our own version based on RUC and ROC */
3316 netdev
->stats
.rx_errors
= adapter
->stats
.rxerrc
+
3317 adapter
->stats
.crcerrs
+ adapter
->stats
.algnerrc
+
3318 adapter
->stats
.ruc
+ adapter
->stats
.roc
+
3319 adapter
->stats
.cexterr
;
3320 adapter
->stats
.rlerrc
= adapter
->stats
.ruc
+ adapter
->stats
.roc
;
3321 netdev
->stats
.rx_length_errors
= adapter
->stats
.rlerrc
;
3322 netdev
->stats
.rx_crc_errors
= adapter
->stats
.crcerrs
;
3323 netdev
->stats
.rx_frame_errors
= adapter
->stats
.algnerrc
;
3324 netdev
->stats
.rx_missed_errors
= adapter
->stats
.mpc
;
3327 adapter
->stats
.txerrc
= adapter
->stats
.ecol
+ adapter
->stats
.latecol
;
3328 netdev
->stats
.tx_errors
= adapter
->stats
.txerrc
;
3329 netdev
->stats
.tx_aborted_errors
= adapter
->stats
.ecol
;
3330 netdev
->stats
.tx_window_errors
= adapter
->stats
.latecol
;
3331 netdev
->stats
.tx_carrier_errors
= adapter
->stats
.tncrs
;
3332 if (hw
->bad_tx_carr_stats_fd
&&
3333 adapter
->link_duplex
== FULL_DUPLEX
) {
3334 netdev
->stats
.tx_carrier_errors
= 0;
3335 adapter
->stats
.tncrs
= 0;
3338 /* Tx Dropped needs to be maintained elsewhere */
3341 if (hw
->media_type
== e1000_media_type_copper
) {
3342 if ((adapter
->link_speed
== SPEED_1000
) &&
3343 (!e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_tmp
))) {
3344 phy_tmp
&= PHY_IDLE_ERROR_COUNT_MASK
;
3345 adapter
->phy_stats
.idle_errors
+= phy_tmp
;
3348 if ((hw
->mac_type
<= e1000_82546
) &&
3349 (hw
->phy_type
== e1000_phy_m88
) &&
3350 !e1000_read_phy_reg(hw
, M88E1000_RX_ERR_CNTR
, &phy_tmp
))
3351 adapter
->phy_stats
.receive_errors
+= phy_tmp
;
3354 /* Management Stats */
3355 if (hw
->has_smbus
) {
3356 adapter
->stats
.mgptc
+= er32(MGTPTC
);
3357 adapter
->stats
.mgprc
+= er32(MGTPRC
);
3358 adapter
->stats
.mgpdc
+= er32(MGTPDC
);
3361 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
3365 * e1000_intr - Interrupt Handler
3366 * @irq: interrupt number
3367 * @data: pointer to a network interface device structure
3370 static irqreturn_t
e1000_intr(int irq
, void *data
)
3372 struct net_device
*netdev
= data
;
3373 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3374 struct e1000_hw
*hw
= &adapter
->hw
;
3375 u32 icr
= er32(ICR
);
3377 if (unlikely((!icr
) || test_bit(__E1000_DOWN
, &adapter
->flags
)))
3378 return IRQ_NONE
; /* Not our interrupt */
3380 if (unlikely(icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
))) {
3381 hw
->get_link_status
= 1;
3382 /* guard against interrupt when we're going down */
3383 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3384 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
3387 /* disable interrupts, without the synchronize_irq bit */
3389 E1000_WRITE_FLUSH();
3391 if (likely(napi_schedule_prep(&adapter
->napi
))) {
3392 adapter
->total_tx_bytes
= 0;
3393 adapter
->total_tx_packets
= 0;
3394 adapter
->total_rx_bytes
= 0;
3395 adapter
->total_rx_packets
= 0;
3396 __napi_schedule(&adapter
->napi
);
3398 /* this really should not happen! if it does it is basically a
3399 * bug, but not a hard error, so enable ints and continue */
3400 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3401 e1000_irq_enable(adapter
);
3408 * e1000_clean - NAPI Rx polling callback
3409 * @adapter: board private structure
3411 static int e1000_clean(struct napi_struct
*napi
, int budget
)
3413 struct e1000_adapter
*adapter
= container_of(napi
, struct e1000_adapter
, napi
);
3414 int tx_clean_complete
= 0, work_done
= 0;
3416 tx_clean_complete
= e1000_clean_tx_irq(adapter
, &adapter
->tx_ring
[0]);
3418 adapter
->clean_rx(adapter
, &adapter
->rx_ring
[0], &work_done
, budget
);
3420 if (!tx_clean_complete
)
3423 /* If budget not fully consumed, exit the polling mode */
3424 if (work_done
< budget
) {
3425 if (likely(adapter
->itr_setting
& 3))
3426 e1000_set_itr(adapter
);
3427 napi_complete(napi
);
3428 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3429 e1000_irq_enable(adapter
);
3436 * e1000_clean_tx_irq - Reclaim resources after transmit completes
3437 * @adapter: board private structure
3439 static bool e1000_clean_tx_irq(struct e1000_adapter
*adapter
,
3440 struct e1000_tx_ring
*tx_ring
)
3442 struct e1000_hw
*hw
= &adapter
->hw
;
3443 struct net_device
*netdev
= adapter
->netdev
;
3444 struct e1000_tx_desc
*tx_desc
, *eop_desc
;
3445 struct e1000_buffer
*buffer_info
;
3446 unsigned int i
, eop
;
3447 unsigned int count
= 0;
3448 unsigned int total_tx_bytes
=0, total_tx_packets
=0;
3450 i
= tx_ring
->next_to_clean
;
3451 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
3452 eop_desc
= E1000_TX_DESC(*tx_ring
, eop
);
3454 while ((eop_desc
->upper
.data
& cpu_to_le32(E1000_TXD_STAT_DD
)) &&
3455 (count
< tx_ring
->count
)) {
3456 bool cleaned
= false;
3457 rmb(); /* read buffer_info after eop_desc */
3458 for ( ; !cleaned
; count
++) {
3459 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3460 buffer_info
= &tx_ring
->buffer_info
[i
];
3461 cleaned
= (i
== eop
);
3464 struct sk_buff
*skb
= buffer_info
->skb
;
3465 unsigned int segs
, bytecount
;
3466 segs
= skb_shinfo(skb
)->gso_segs
?: 1;
3467 /* multiply data chunks by size of headers */
3468 bytecount
= ((segs
- 1) * skb_headlen(skb
)) +
3470 total_tx_packets
+= segs
;
3471 total_tx_bytes
+= bytecount
;
3473 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
3474 tx_desc
->upper
.data
= 0;
3476 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
3479 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
3480 eop_desc
= E1000_TX_DESC(*tx_ring
, eop
);
3483 tx_ring
->next_to_clean
= i
;
3485 #define TX_WAKE_THRESHOLD 32
3486 if (unlikely(count
&& netif_carrier_ok(netdev
) &&
3487 E1000_DESC_UNUSED(tx_ring
) >= TX_WAKE_THRESHOLD
)) {
3488 /* Make sure that anybody stopping the queue after this
3489 * sees the new next_to_clean.
3493 if (netif_queue_stopped(netdev
) &&
3494 !(test_bit(__E1000_DOWN
, &adapter
->flags
))) {
3495 netif_wake_queue(netdev
);
3496 ++adapter
->restart_queue
;
3500 if (adapter
->detect_tx_hung
) {
3501 /* Detect a transmit hang in hardware, this serializes the
3502 * check with the clearing of time_stamp and movement of i */
3503 adapter
->detect_tx_hung
= false;
3504 if (tx_ring
->buffer_info
[eop
].time_stamp
&&
3505 time_after(jiffies
, tx_ring
->buffer_info
[eop
].time_stamp
+
3506 (adapter
->tx_timeout_factor
* HZ
)) &&
3507 !(er32(STATUS
) & E1000_STATUS_TXOFF
)) {
3509 /* detected Tx unit hang */
3510 e_err(drv
, "Detected Tx Unit Hang\n"
3514 " next_to_use <%x>\n"
3515 " next_to_clean <%x>\n"
3516 "buffer_info[next_to_clean]\n"
3517 " time_stamp <%lx>\n"
3518 " next_to_watch <%x>\n"
3520 " next_to_watch.status <%x>\n",
3521 (unsigned long)((tx_ring
- adapter
->tx_ring
) /
3522 sizeof(struct e1000_tx_ring
)),
3523 readl(hw
->hw_addr
+ tx_ring
->tdh
),
3524 readl(hw
->hw_addr
+ tx_ring
->tdt
),
3525 tx_ring
->next_to_use
,
3526 tx_ring
->next_to_clean
,
3527 tx_ring
->buffer_info
[eop
].time_stamp
,
3530 eop_desc
->upper
.fields
.status
);
3531 netif_stop_queue(netdev
);
3534 adapter
->total_tx_bytes
+= total_tx_bytes
;
3535 adapter
->total_tx_packets
+= total_tx_packets
;
3536 netdev
->stats
.tx_bytes
+= total_tx_bytes
;
3537 netdev
->stats
.tx_packets
+= total_tx_packets
;
3538 return (count
< tx_ring
->count
);
3542 * e1000_rx_checksum - Receive Checksum Offload for 82543
3543 * @adapter: board private structure
3544 * @status_err: receive descriptor status and error fields
3545 * @csum: receive descriptor csum field
3546 * @sk_buff: socket buffer with received data
3549 static void e1000_rx_checksum(struct e1000_adapter
*adapter
, u32 status_err
,
3550 u32 csum
, struct sk_buff
*skb
)
3552 struct e1000_hw
*hw
= &adapter
->hw
;
3553 u16 status
= (u16
)status_err
;
3554 u8 errors
= (u8
)(status_err
>> 24);
3555 skb
->ip_summed
= CHECKSUM_NONE
;
3557 /* 82543 or newer only */
3558 if (unlikely(hw
->mac_type
< e1000_82543
)) return;
3559 /* Ignore Checksum bit is set */
3560 if (unlikely(status
& E1000_RXD_STAT_IXSM
)) return;
3561 /* TCP/UDP checksum error bit is set */
3562 if (unlikely(errors
& E1000_RXD_ERR_TCPE
)) {
3563 /* let the stack verify checksum errors */
3564 adapter
->hw_csum_err
++;
3567 /* TCP/UDP Checksum has not been calculated */
3568 if (!(status
& E1000_RXD_STAT_TCPCS
))
3571 /* It must be a TCP or UDP packet with a valid checksum */
3572 if (likely(status
& E1000_RXD_STAT_TCPCS
)) {
3573 /* TCP checksum is good */
3574 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
3576 adapter
->hw_csum_good
++;
3580 * e1000_consume_page - helper function
3582 static void e1000_consume_page(struct e1000_buffer
*bi
, struct sk_buff
*skb
,
3587 skb
->data_len
+= length
;
3588 skb
->truesize
+= length
;
3592 * e1000_receive_skb - helper function to handle rx indications
3593 * @adapter: board private structure
3594 * @status: descriptor status field as written by hardware
3595 * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
3596 * @skb: pointer to sk_buff to be indicated to stack
3598 static void e1000_receive_skb(struct e1000_adapter
*adapter
, u8 status
,
3599 __le16 vlan
, struct sk_buff
*skb
)
3601 if (unlikely(adapter
->vlgrp
&& (status
& E1000_RXD_STAT_VP
))) {
3602 vlan_hwaccel_receive_skb(skb
, adapter
->vlgrp
,
3604 E1000_RXD_SPC_VLAN_MASK
);
3606 netif_receive_skb(skb
);
3611 * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
3612 * @adapter: board private structure
3613 * @rx_ring: ring to clean
3614 * @work_done: amount of napi work completed this call
3615 * @work_to_do: max amount of work allowed for this call to do
3617 * the return value indicates whether actual cleaning was done, there
3618 * is no guarantee that everything was cleaned
3620 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter
*adapter
,
3621 struct e1000_rx_ring
*rx_ring
,
3622 int *work_done
, int work_to_do
)
3624 struct e1000_hw
*hw
= &adapter
->hw
;
3625 struct net_device
*netdev
= adapter
->netdev
;
3626 struct pci_dev
*pdev
= adapter
->pdev
;
3627 struct e1000_rx_desc
*rx_desc
, *next_rxd
;
3628 struct e1000_buffer
*buffer_info
, *next_buffer
;
3629 unsigned long irq_flags
;
3632 int cleaned_count
= 0;
3633 bool cleaned
= false;
3634 unsigned int total_rx_bytes
=0, total_rx_packets
=0;
3636 i
= rx_ring
->next_to_clean
;
3637 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
3638 buffer_info
= &rx_ring
->buffer_info
[i
];
3640 while (rx_desc
->status
& E1000_RXD_STAT_DD
) {
3641 struct sk_buff
*skb
;
3644 if (*work_done
>= work_to_do
)
3647 rmb(); /* read descriptor and rx_buffer_info after status DD */
3649 status
= rx_desc
->status
;
3650 skb
= buffer_info
->skb
;
3651 buffer_info
->skb
= NULL
;
3653 if (++i
== rx_ring
->count
) i
= 0;
3654 next_rxd
= E1000_RX_DESC(*rx_ring
, i
);
3657 next_buffer
= &rx_ring
->buffer_info
[i
];
3661 dma_unmap_page(&pdev
->dev
, buffer_info
->dma
,
3662 buffer_info
->length
, DMA_FROM_DEVICE
);
3663 buffer_info
->dma
= 0;
3665 length
= le16_to_cpu(rx_desc
->length
);
3667 /* errors is only valid for DD + EOP descriptors */
3668 if (unlikely((status
& E1000_RXD_STAT_EOP
) &&
3669 (rx_desc
->errors
& E1000_RXD_ERR_FRAME_ERR_MASK
))) {
3670 u8 last_byte
= *(skb
->data
+ length
- 1);
3671 if (TBI_ACCEPT(hw
, status
, rx_desc
->errors
, length
,
3673 spin_lock_irqsave(&adapter
->stats_lock
,
3675 e1000_tbi_adjust_stats(hw
, &adapter
->stats
,
3677 spin_unlock_irqrestore(&adapter
->stats_lock
,
3681 /* recycle both page and skb */
3682 buffer_info
->skb
= skb
;
3683 /* an error means any chain goes out the window
3685 if (rx_ring
->rx_skb_top
)
3686 dev_kfree_skb(rx_ring
->rx_skb_top
);
3687 rx_ring
->rx_skb_top
= NULL
;
3692 #define rxtop rx_ring->rx_skb_top
3693 if (!(status
& E1000_RXD_STAT_EOP
)) {
3694 /* this descriptor is only the beginning (or middle) */
3696 /* this is the beginning of a chain */
3698 skb_fill_page_desc(rxtop
, 0, buffer_info
->page
,
3701 /* this is the middle of a chain */
3702 skb_fill_page_desc(rxtop
,
3703 skb_shinfo(rxtop
)->nr_frags
,
3704 buffer_info
->page
, 0, length
);
3705 /* re-use the skb, only consumed the page */
3706 buffer_info
->skb
= skb
;
3708 e1000_consume_page(buffer_info
, rxtop
, length
);
3712 /* end of the chain */
3713 skb_fill_page_desc(rxtop
,
3714 skb_shinfo(rxtop
)->nr_frags
,
3715 buffer_info
->page
, 0, length
);
3716 /* re-use the current skb, we only consumed the
3718 buffer_info
->skb
= skb
;
3721 e1000_consume_page(buffer_info
, skb
, length
);
3723 /* no chain, got EOP, this buf is the packet
3724 * copybreak to save the put_page/alloc_page */
3725 if (length
<= copybreak
&&
3726 skb_tailroom(skb
) >= length
) {
3728 vaddr
= kmap_atomic(buffer_info
->page
,
3729 KM_SKB_DATA_SOFTIRQ
);
3730 memcpy(skb_tail_pointer(skb
), vaddr
, length
);
3731 kunmap_atomic(vaddr
,
3732 KM_SKB_DATA_SOFTIRQ
);
3733 /* re-use the page, so don't erase
3734 * buffer_info->page */
3735 skb_put(skb
, length
);
3737 skb_fill_page_desc(skb
, 0,
3738 buffer_info
->page
, 0,
3740 e1000_consume_page(buffer_info
, skb
,
3746 /* Receive Checksum Offload XXX recompute due to CRC strip? */
3747 e1000_rx_checksum(adapter
,
3749 ((u32
)(rx_desc
->errors
) << 24),
3750 le16_to_cpu(rx_desc
->csum
), skb
);
3752 pskb_trim(skb
, skb
->len
- 4);
3754 /* probably a little skewed due to removing CRC */
3755 total_rx_bytes
+= skb
->len
;
3758 /* eth type trans needs skb->data to point to something */
3759 if (!pskb_may_pull(skb
, ETH_HLEN
)) {
3760 e_err(drv
, "pskb_may_pull failed.\n");
3765 skb
->protocol
= eth_type_trans(skb
, netdev
);
3767 e1000_receive_skb(adapter
, status
, rx_desc
->special
, skb
);
3770 rx_desc
->status
= 0;
3772 /* return some buffers to hardware, one at a time is too slow */
3773 if (unlikely(cleaned_count
>= E1000_RX_BUFFER_WRITE
)) {
3774 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
3778 /* use prefetched values */
3780 buffer_info
= next_buffer
;
3782 rx_ring
->next_to_clean
= i
;
3784 cleaned_count
= E1000_DESC_UNUSED(rx_ring
);
3786 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
3788 adapter
->total_rx_packets
+= total_rx_packets
;
3789 adapter
->total_rx_bytes
+= total_rx_bytes
;
3790 netdev
->stats
.rx_bytes
+= total_rx_bytes
;
3791 netdev
->stats
.rx_packets
+= total_rx_packets
;
3796 * this should improve performance for small packets with large amounts
3797 * of reassembly being done in the stack
3799 static void e1000_check_copybreak(struct net_device
*netdev
,
3800 struct e1000_buffer
*buffer_info
,
3801 u32 length
, struct sk_buff
**skb
)
3803 struct sk_buff
*new_skb
;
3805 if (length
> copybreak
)
3808 new_skb
= netdev_alloc_skb_ip_align(netdev
, length
);
3812 skb_copy_to_linear_data_offset(new_skb
, -NET_IP_ALIGN
,
3813 (*skb
)->data
- NET_IP_ALIGN
,
3814 length
+ NET_IP_ALIGN
);
3815 /* save the skb in buffer_info as good */
3816 buffer_info
->skb
= *skb
;
3821 * e1000_clean_rx_irq - Send received data up the network stack; legacy
3822 * @adapter: board private structure
3823 * @rx_ring: ring to clean
3824 * @work_done: amount of napi work completed this call
3825 * @work_to_do: max amount of work allowed for this call to do
3827 static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter
,
3828 struct e1000_rx_ring
*rx_ring
,
3829 int *work_done
, int work_to_do
)
3831 struct e1000_hw
*hw
= &adapter
->hw
;
3832 struct net_device
*netdev
= adapter
->netdev
;
3833 struct pci_dev
*pdev
= adapter
->pdev
;
3834 struct e1000_rx_desc
*rx_desc
, *next_rxd
;
3835 struct e1000_buffer
*buffer_info
, *next_buffer
;
3836 unsigned long flags
;
3839 int cleaned_count
= 0;
3840 bool cleaned
= false;
3841 unsigned int total_rx_bytes
=0, total_rx_packets
=0;
3843 i
= rx_ring
->next_to_clean
;
3844 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
3845 buffer_info
= &rx_ring
->buffer_info
[i
];
3847 while (rx_desc
->status
& E1000_RXD_STAT_DD
) {
3848 struct sk_buff
*skb
;
3851 if (*work_done
>= work_to_do
)
3854 rmb(); /* read descriptor and rx_buffer_info after status DD */
3856 status
= rx_desc
->status
;
3857 skb
= buffer_info
->skb
;
3858 buffer_info
->skb
= NULL
;
3860 prefetch(skb
->data
- NET_IP_ALIGN
);
3862 if (++i
== rx_ring
->count
) i
= 0;
3863 next_rxd
= E1000_RX_DESC(*rx_ring
, i
);
3866 next_buffer
= &rx_ring
->buffer_info
[i
];
3870 dma_unmap_single(&pdev
->dev
, buffer_info
->dma
,
3871 buffer_info
->length
, DMA_FROM_DEVICE
);
3872 buffer_info
->dma
= 0;
3874 length
= le16_to_cpu(rx_desc
->length
);
3875 /* !EOP means multiple descriptors were used to store a single
3876 * packet, if thats the case we need to toss it. In fact, we
3877 * to toss every packet with the EOP bit clear and the next
3878 * frame that _does_ have the EOP bit set, as it is by
3879 * definition only a frame fragment
3881 if (unlikely(!(status
& E1000_RXD_STAT_EOP
)))
3882 adapter
->discarding
= true;
3884 if (adapter
->discarding
) {
3885 /* All receives must fit into a single buffer */
3886 e_dbg("Receive packet consumed multiple buffers\n");
3888 buffer_info
->skb
= skb
;
3889 if (status
& E1000_RXD_STAT_EOP
)
3890 adapter
->discarding
= false;
3894 if (unlikely(rx_desc
->errors
& E1000_RXD_ERR_FRAME_ERR_MASK
)) {
3895 u8 last_byte
= *(skb
->data
+ length
- 1);
3896 if (TBI_ACCEPT(hw
, status
, rx_desc
->errors
, length
,
3898 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
3899 e1000_tbi_adjust_stats(hw
, &adapter
->stats
,
3901 spin_unlock_irqrestore(&adapter
->stats_lock
,
3906 buffer_info
->skb
= skb
;
3911 /* adjust length to remove Ethernet CRC, this must be
3912 * done after the TBI_ACCEPT workaround above */
3915 /* probably a little skewed due to removing CRC */
3916 total_rx_bytes
+= length
;
3919 e1000_check_copybreak(netdev
, buffer_info
, length
, &skb
);
3921 skb_put(skb
, length
);
3923 /* Receive Checksum Offload */
3924 e1000_rx_checksum(adapter
,
3926 ((u32
)(rx_desc
->errors
) << 24),
3927 le16_to_cpu(rx_desc
->csum
), skb
);
3929 skb
->protocol
= eth_type_trans(skb
, netdev
);
3931 e1000_receive_skb(adapter
, status
, rx_desc
->special
, skb
);
3934 rx_desc
->status
= 0;
3936 /* return some buffers to hardware, one at a time is too slow */
3937 if (unlikely(cleaned_count
>= E1000_RX_BUFFER_WRITE
)) {
3938 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
3942 /* use prefetched values */
3944 buffer_info
= next_buffer
;
3946 rx_ring
->next_to_clean
= i
;
3948 cleaned_count
= E1000_DESC_UNUSED(rx_ring
);
3950 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
3952 adapter
->total_rx_packets
+= total_rx_packets
;
3953 adapter
->total_rx_bytes
+= total_rx_bytes
;
3954 netdev
->stats
.rx_bytes
+= total_rx_bytes
;
3955 netdev
->stats
.rx_packets
+= total_rx_packets
;
3960 * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
3961 * @adapter: address of board private structure
3962 * @rx_ring: pointer to receive ring structure
3963 * @cleaned_count: number of buffers to allocate this pass
3967 e1000_alloc_jumbo_rx_buffers(struct e1000_adapter
*adapter
,
3968 struct e1000_rx_ring
*rx_ring
, int cleaned_count
)
3970 struct net_device
*netdev
= adapter
->netdev
;
3971 struct pci_dev
*pdev
= adapter
->pdev
;
3972 struct e1000_rx_desc
*rx_desc
;
3973 struct e1000_buffer
*buffer_info
;
3974 struct sk_buff
*skb
;
3976 unsigned int bufsz
= 256 - 16 /*for skb_reserve */ ;
3978 i
= rx_ring
->next_to_use
;
3979 buffer_info
= &rx_ring
->buffer_info
[i
];
3981 while (cleaned_count
--) {
3982 skb
= buffer_info
->skb
;
3988 skb
= netdev_alloc_skb_ip_align(netdev
, bufsz
);
3989 if (unlikely(!skb
)) {
3990 /* Better luck next round */
3991 adapter
->alloc_rx_buff_failed
++;
3995 /* Fix for errata 23, can't cross 64kB boundary */
3996 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
3997 struct sk_buff
*oldskb
= skb
;
3998 e_err(rx_err
, "skb align check failed: %u bytes at "
3999 "%p\n", bufsz
, skb
->data
);
4000 /* Try again, without freeing the previous */
4001 skb
= netdev_alloc_skb_ip_align(netdev
, bufsz
);
4002 /* Failed allocation, critical failure */
4004 dev_kfree_skb(oldskb
);
4005 adapter
->alloc_rx_buff_failed
++;
4009 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4012 dev_kfree_skb(oldskb
);
4013 break; /* while (cleaned_count--) */
4016 /* Use new allocation */
4017 dev_kfree_skb(oldskb
);
4019 buffer_info
->skb
= skb
;
4020 buffer_info
->length
= adapter
->rx_buffer_len
;
4022 /* allocate a new page if necessary */
4023 if (!buffer_info
->page
) {
4024 buffer_info
->page
= alloc_page(GFP_ATOMIC
);
4025 if (unlikely(!buffer_info
->page
)) {
4026 adapter
->alloc_rx_buff_failed
++;
4031 if (!buffer_info
->dma
) {
4032 buffer_info
->dma
= dma_map_page(&pdev
->dev
,
4033 buffer_info
->page
, 0,
4034 buffer_info
->length
,
4036 if (dma_mapping_error(&pdev
->dev
, buffer_info
->dma
)) {
4037 put_page(buffer_info
->page
);
4039 buffer_info
->page
= NULL
;
4040 buffer_info
->skb
= NULL
;
4041 buffer_info
->dma
= 0;
4042 adapter
->alloc_rx_buff_failed
++;
4043 break; /* while !buffer_info->skb */
4047 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
4048 rx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
4050 if (unlikely(++i
== rx_ring
->count
))
4052 buffer_info
= &rx_ring
->buffer_info
[i
];
4055 if (likely(rx_ring
->next_to_use
!= i
)) {
4056 rx_ring
->next_to_use
= i
;
4057 if (unlikely(i
-- == 0))
4058 i
= (rx_ring
->count
- 1);
4060 /* Force memory writes to complete before letting h/w
4061 * know there are new descriptors to fetch. (Only
4062 * applicable for weak-ordered memory model archs,
4063 * such as IA-64). */
4065 writel(i
, adapter
->hw
.hw_addr
+ rx_ring
->rdt
);
4070 * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4071 * @adapter: address of board private structure
4074 static void e1000_alloc_rx_buffers(struct e1000_adapter
*adapter
,
4075 struct e1000_rx_ring
*rx_ring
,
4078 struct e1000_hw
*hw
= &adapter
->hw
;
4079 struct net_device
*netdev
= adapter
->netdev
;
4080 struct pci_dev
*pdev
= adapter
->pdev
;
4081 struct e1000_rx_desc
*rx_desc
;
4082 struct e1000_buffer
*buffer_info
;
4083 struct sk_buff
*skb
;
4085 unsigned int bufsz
= adapter
->rx_buffer_len
;
4087 i
= rx_ring
->next_to_use
;
4088 buffer_info
= &rx_ring
->buffer_info
[i
];
4090 while (cleaned_count
--) {
4091 skb
= buffer_info
->skb
;
4097 skb
= netdev_alloc_skb_ip_align(netdev
, bufsz
);
4098 if (unlikely(!skb
)) {
4099 /* Better luck next round */
4100 adapter
->alloc_rx_buff_failed
++;
4104 /* Fix for errata 23, can't cross 64kB boundary */
4105 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4106 struct sk_buff
*oldskb
= skb
;
4107 e_err(rx_err
, "skb align check failed: %u bytes at "
4108 "%p\n", bufsz
, skb
->data
);
4109 /* Try again, without freeing the previous */
4110 skb
= netdev_alloc_skb_ip_align(netdev
, bufsz
);
4111 /* Failed allocation, critical failure */
4113 dev_kfree_skb(oldskb
);
4114 adapter
->alloc_rx_buff_failed
++;
4118 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4121 dev_kfree_skb(oldskb
);
4122 adapter
->alloc_rx_buff_failed
++;
4123 break; /* while !buffer_info->skb */
4126 /* Use new allocation */
4127 dev_kfree_skb(oldskb
);
4129 buffer_info
->skb
= skb
;
4130 buffer_info
->length
= adapter
->rx_buffer_len
;
4132 buffer_info
->dma
= dma_map_single(&pdev
->dev
,
4134 buffer_info
->length
,
4136 if (dma_mapping_error(&pdev
->dev
, buffer_info
->dma
)) {
4138 buffer_info
->skb
= NULL
;
4139 buffer_info
->dma
= 0;
4140 adapter
->alloc_rx_buff_failed
++;
4141 break; /* while !buffer_info->skb */
4145 * XXX if it was allocated cleanly it will never map to a
4149 /* Fix for errata 23, can't cross 64kB boundary */
4150 if (!e1000_check_64k_bound(adapter
,
4151 (void *)(unsigned long)buffer_info
->dma
,
4152 adapter
->rx_buffer_len
)) {
4153 e_err(rx_err
, "dma align check failed: %u bytes at "
4154 "%p\n", adapter
->rx_buffer_len
,
4155 (void *)(unsigned long)buffer_info
->dma
);
4157 buffer_info
->skb
= NULL
;
4159 dma_unmap_single(&pdev
->dev
, buffer_info
->dma
,
4160 adapter
->rx_buffer_len
,
4162 buffer_info
->dma
= 0;
4164 adapter
->alloc_rx_buff_failed
++;
4165 break; /* while !buffer_info->skb */
4167 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
4168 rx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
4170 if (unlikely(++i
== rx_ring
->count
))
4172 buffer_info
= &rx_ring
->buffer_info
[i
];
4175 if (likely(rx_ring
->next_to_use
!= i
)) {
4176 rx_ring
->next_to_use
= i
;
4177 if (unlikely(i
-- == 0))
4178 i
= (rx_ring
->count
- 1);
4180 /* Force memory writes to complete before letting h/w
4181 * know there are new descriptors to fetch. (Only
4182 * applicable for weak-ordered memory model archs,
4183 * such as IA-64). */
4185 writel(i
, hw
->hw_addr
+ rx_ring
->rdt
);
4190 * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4194 static void e1000_smartspeed(struct e1000_adapter
*adapter
)
4196 struct e1000_hw
*hw
= &adapter
->hw
;
4200 if ((hw
->phy_type
!= e1000_phy_igp
) || !hw
->autoneg
||
4201 !(hw
->autoneg_advertised
& ADVERTISE_1000_FULL
))
4204 if (adapter
->smartspeed
== 0) {
4205 /* If Master/Slave config fault is asserted twice,
4206 * we assume back-to-back */
4207 e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_status
);
4208 if (!(phy_status
& SR_1000T_MS_CONFIG_FAULT
)) return;
4209 e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_status
);
4210 if (!(phy_status
& SR_1000T_MS_CONFIG_FAULT
)) return;
4211 e1000_read_phy_reg(hw
, PHY_1000T_CTRL
, &phy_ctrl
);
4212 if (phy_ctrl
& CR_1000T_MS_ENABLE
) {
4213 phy_ctrl
&= ~CR_1000T_MS_ENABLE
;
4214 e1000_write_phy_reg(hw
, PHY_1000T_CTRL
,
4216 adapter
->smartspeed
++;
4217 if (!e1000_phy_setup_autoneg(hw
) &&
4218 !e1000_read_phy_reg(hw
, PHY_CTRL
,
4220 phy_ctrl
|= (MII_CR_AUTO_NEG_EN
|
4221 MII_CR_RESTART_AUTO_NEG
);
4222 e1000_write_phy_reg(hw
, PHY_CTRL
,
4227 } else if (adapter
->smartspeed
== E1000_SMARTSPEED_DOWNSHIFT
) {
4228 /* If still no link, perhaps using 2/3 pair cable */
4229 e1000_read_phy_reg(hw
, PHY_1000T_CTRL
, &phy_ctrl
);
4230 phy_ctrl
|= CR_1000T_MS_ENABLE
;
4231 e1000_write_phy_reg(hw
, PHY_1000T_CTRL
, phy_ctrl
);
4232 if (!e1000_phy_setup_autoneg(hw
) &&
4233 !e1000_read_phy_reg(hw
, PHY_CTRL
, &phy_ctrl
)) {
4234 phy_ctrl
|= (MII_CR_AUTO_NEG_EN
|
4235 MII_CR_RESTART_AUTO_NEG
);
4236 e1000_write_phy_reg(hw
, PHY_CTRL
, phy_ctrl
);
4239 /* Restart process after E1000_SMARTSPEED_MAX iterations */
4240 if (adapter
->smartspeed
++ == E1000_SMARTSPEED_MAX
)
4241 adapter
->smartspeed
= 0;
4251 static int e1000_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
4257 return e1000_mii_ioctl(netdev
, ifr
, cmd
);
4270 static int e1000_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
,
4273 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4274 struct e1000_hw
*hw
= &adapter
->hw
;
4275 struct mii_ioctl_data
*data
= if_mii(ifr
);
4279 unsigned long flags
;
4281 if (hw
->media_type
!= e1000_media_type_copper
)
4286 data
->phy_id
= hw
->phy_addr
;
4289 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4290 if (e1000_read_phy_reg(hw
, data
->reg_num
& 0x1F,
4292 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4295 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4298 if (data
->reg_num
& ~(0x1F))
4300 mii_reg
= data
->val_in
;
4301 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4302 if (e1000_write_phy_reg(hw
, data
->reg_num
,
4304 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4307 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4308 if (hw
->media_type
== e1000_media_type_copper
) {
4309 switch (data
->reg_num
) {
4311 if (mii_reg
& MII_CR_POWER_DOWN
)
4313 if (mii_reg
& MII_CR_AUTO_NEG_EN
) {
4315 hw
->autoneg_advertised
= 0x2F;
4318 spddplx
= SPEED_1000
;
4319 else if (mii_reg
& 0x2000)
4320 spddplx
= SPEED_100
;
4323 spddplx
+= (mii_reg
& 0x100)
4326 retval
= e1000_set_spd_dplx(adapter
,
4331 if (netif_running(adapter
->netdev
))
4332 e1000_reinit_locked(adapter
);
4334 e1000_reset(adapter
);
4336 case M88E1000_PHY_SPEC_CTRL
:
4337 case M88E1000_EXT_PHY_SPEC_CTRL
:
4338 if (e1000_phy_reset(hw
))
4343 switch (data
->reg_num
) {
4345 if (mii_reg
& MII_CR_POWER_DOWN
)
4347 if (netif_running(adapter
->netdev
))
4348 e1000_reinit_locked(adapter
);
4350 e1000_reset(adapter
);
4358 return E1000_SUCCESS
;
4361 void e1000_pci_set_mwi(struct e1000_hw
*hw
)
4363 struct e1000_adapter
*adapter
= hw
->back
;
4364 int ret_val
= pci_set_mwi(adapter
->pdev
);
4367 e_err(probe
, "Error in setting MWI\n");
4370 void e1000_pci_clear_mwi(struct e1000_hw
*hw
)
4372 struct e1000_adapter
*adapter
= hw
->back
;
4374 pci_clear_mwi(adapter
->pdev
);
4377 int e1000_pcix_get_mmrbc(struct e1000_hw
*hw
)
4379 struct e1000_adapter
*adapter
= hw
->back
;
4380 return pcix_get_mmrbc(adapter
->pdev
);
4383 void e1000_pcix_set_mmrbc(struct e1000_hw
*hw
, int mmrbc
)
4385 struct e1000_adapter
*adapter
= hw
->back
;
4386 pcix_set_mmrbc(adapter
->pdev
, mmrbc
);
4389 void e1000_io_write(struct e1000_hw
*hw
, unsigned long port
, u32 value
)
4394 static void e1000_vlan_rx_register(struct net_device
*netdev
,
4395 struct vlan_group
*grp
)
4397 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4398 struct e1000_hw
*hw
= &adapter
->hw
;
4401 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4402 e1000_irq_disable(adapter
);
4403 adapter
->vlgrp
= grp
;
4406 /* enable VLAN tag insert/strip */
4408 ctrl
|= E1000_CTRL_VME
;
4411 /* enable VLAN receive filtering */
4413 rctl
&= ~E1000_RCTL_CFIEN
;
4414 if (!(netdev
->flags
& IFF_PROMISC
))
4415 rctl
|= E1000_RCTL_VFE
;
4417 e1000_update_mng_vlan(adapter
);
4419 /* disable VLAN tag insert/strip */
4421 ctrl
&= ~E1000_CTRL_VME
;
4424 /* disable VLAN receive filtering */
4426 rctl
&= ~E1000_RCTL_VFE
;
4429 if (adapter
->mng_vlan_id
!= (u16
)E1000_MNG_VLAN_NONE
) {
4430 e1000_vlan_rx_kill_vid(netdev
, adapter
->mng_vlan_id
);
4431 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
4435 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4436 e1000_irq_enable(adapter
);
4439 static void e1000_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
)
4441 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4442 struct e1000_hw
*hw
= &adapter
->hw
;
4445 if ((hw
->mng_cookie
.status
&
4446 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
4447 (vid
== adapter
->mng_vlan_id
))
4449 /* add VID to filter table */
4450 index
= (vid
>> 5) & 0x7F;
4451 vfta
= E1000_READ_REG_ARRAY(hw
, VFTA
, index
);
4452 vfta
|= (1 << (vid
& 0x1F));
4453 e1000_write_vfta(hw
, index
, vfta
);
4456 static void e1000_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
)
4458 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4459 struct e1000_hw
*hw
= &adapter
->hw
;
4462 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4463 e1000_irq_disable(adapter
);
4464 vlan_group_set_device(adapter
->vlgrp
, vid
, NULL
);
4465 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4466 e1000_irq_enable(adapter
);
4468 /* remove VID from filter table */
4469 index
= (vid
>> 5) & 0x7F;
4470 vfta
= E1000_READ_REG_ARRAY(hw
, VFTA
, index
);
4471 vfta
&= ~(1 << (vid
& 0x1F));
4472 e1000_write_vfta(hw
, index
, vfta
);
4475 static void e1000_restore_vlan(struct e1000_adapter
*adapter
)
4477 e1000_vlan_rx_register(adapter
->netdev
, adapter
->vlgrp
);
4479 if (adapter
->vlgrp
) {
4481 for (vid
= 0; vid
< VLAN_GROUP_ARRAY_LEN
; vid
++) {
4482 if (!vlan_group_get_device(adapter
->vlgrp
, vid
))
4484 e1000_vlan_rx_add_vid(adapter
->netdev
, vid
);
4489 int e1000_set_spd_dplx(struct e1000_adapter
*adapter
, u16 spddplx
)
4491 struct e1000_hw
*hw
= &adapter
->hw
;
4495 /* Fiber NICs only allow 1000 gbps Full duplex */
4496 if ((hw
->media_type
== e1000_media_type_fiber
) &&
4497 spddplx
!= (SPEED_1000
+ DUPLEX_FULL
)) {
4498 e_err(probe
, "Unsupported Speed/Duplex configuration\n");
4503 case SPEED_10
+ DUPLEX_HALF
:
4504 hw
->forced_speed_duplex
= e1000_10_half
;
4506 case SPEED_10
+ DUPLEX_FULL
:
4507 hw
->forced_speed_duplex
= e1000_10_full
;
4509 case SPEED_100
+ DUPLEX_HALF
:
4510 hw
->forced_speed_duplex
= e1000_100_half
;
4512 case SPEED_100
+ DUPLEX_FULL
:
4513 hw
->forced_speed_duplex
= e1000_100_full
;
4515 case SPEED_1000
+ DUPLEX_FULL
:
4517 hw
->autoneg_advertised
= ADVERTISE_1000_FULL
;
4519 case SPEED_1000
+ DUPLEX_HALF
: /* not supported */
4521 e_err(probe
, "Unsupported Speed/Duplex configuration\n");
4527 static int __e1000_shutdown(struct pci_dev
*pdev
, bool *enable_wake
)
4529 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4530 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4531 struct e1000_hw
*hw
= &adapter
->hw
;
4532 u32 ctrl
, ctrl_ext
, rctl
, status
;
4533 u32 wufc
= adapter
->wol
;
4538 netif_device_detach(netdev
);
4540 if (netif_running(netdev
)) {
4541 WARN_ON(test_bit(__E1000_RESETTING
, &adapter
->flags
));
4542 e1000_down(adapter
);
4546 retval
= pci_save_state(pdev
);
4551 status
= er32(STATUS
);
4552 if (status
& E1000_STATUS_LU
)
4553 wufc
&= ~E1000_WUFC_LNKC
;
4556 e1000_setup_rctl(adapter
);
4557 e1000_set_rx_mode(netdev
);
4559 /* turn on all-multi mode if wake on multicast is enabled */
4560 if (wufc
& E1000_WUFC_MC
) {
4562 rctl
|= E1000_RCTL_MPE
;
4566 if (hw
->mac_type
>= e1000_82540
) {
4568 /* advertise wake from D3Cold */
4569 #define E1000_CTRL_ADVD3WUC 0x00100000
4570 /* phy power management enable */
4571 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4572 ctrl
|= E1000_CTRL_ADVD3WUC
|
4573 E1000_CTRL_EN_PHY_PWR_MGMT
;
4577 if (hw
->media_type
== e1000_media_type_fiber
||
4578 hw
->media_type
== e1000_media_type_internal_serdes
) {
4579 /* keep the laser running in D3 */
4580 ctrl_ext
= er32(CTRL_EXT
);
4581 ctrl_ext
|= E1000_CTRL_EXT_SDP7_DATA
;
4582 ew32(CTRL_EXT
, ctrl_ext
);
4585 ew32(WUC
, E1000_WUC_PME_EN
);
4592 e1000_release_manageability(adapter
);
4594 *enable_wake
= !!wufc
;
4596 /* make sure adapter isn't asleep if manageability is enabled */
4597 if (adapter
->en_mng_pt
)
4598 *enable_wake
= true;
4600 if (netif_running(netdev
))
4601 e1000_free_irq(adapter
);
4603 pci_disable_device(pdev
);
4609 static int e1000_suspend(struct pci_dev
*pdev
, pm_message_t state
)
4614 retval
= __e1000_shutdown(pdev
, &wake
);
4619 pci_prepare_to_sleep(pdev
);
4621 pci_wake_from_d3(pdev
, false);
4622 pci_set_power_state(pdev
, PCI_D3hot
);
4628 static int e1000_resume(struct pci_dev
*pdev
)
4630 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4631 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4632 struct e1000_hw
*hw
= &adapter
->hw
;
4635 pci_set_power_state(pdev
, PCI_D0
);
4636 pci_restore_state(pdev
);
4637 pci_save_state(pdev
);
4639 if (adapter
->need_ioport
)
4640 err
= pci_enable_device(pdev
);
4642 err
= pci_enable_device_mem(pdev
);
4644 pr_err("Cannot enable PCI device from suspend\n");
4647 pci_set_master(pdev
);
4649 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4650 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4652 if (netif_running(netdev
)) {
4653 err
= e1000_request_irq(adapter
);
4658 e1000_power_up_phy(adapter
);
4659 e1000_reset(adapter
);
4662 e1000_init_manageability(adapter
);
4664 if (netif_running(netdev
))
4667 netif_device_attach(netdev
);
4673 static void e1000_shutdown(struct pci_dev
*pdev
)
4677 __e1000_shutdown(pdev
, &wake
);
4679 if (system_state
== SYSTEM_POWER_OFF
) {
4680 pci_wake_from_d3(pdev
, wake
);
4681 pci_set_power_state(pdev
, PCI_D3hot
);
4685 #ifdef CONFIG_NET_POLL_CONTROLLER
4687 * Polling 'interrupt' - used by things like netconsole to send skbs
4688 * without having to re-enable interrupts. It's not called while
4689 * the interrupt routine is executing.
4691 static void e1000_netpoll(struct net_device
*netdev
)
4693 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4695 disable_irq(adapter
->pdev
->irq
);
4696 e1000_intr(adapter
->pdev
->irq
, netdev
);
4697 enable_irq(adapter
->pdev
->irq
);
4702 * e1000_io_error_detected - called when PCI error is detected
4703 * @pdev: Pointer to PCI device
4704 * @state: The current pci connection state
4706 * This function is called after a PCI bus error affecting
4707 * this device has been detected.
4709 static pci_ers_result_t
e1000_io_error_detected(struct pci_dev
*pdev
,
4710 pci_channel_state_t state
)
4712 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4713 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4715 netif_device_detach(netdev
);
4717 if (state
== pci_channel_io_perm_failure
)
4718 return PCI_ERS_RESULT_DISCONNECT
;
4720 if (netif_running(netdev
))
4721 e1000_down(adapter
);
4722 pci_disable_device(pdev
);
4724 /* Request a slot slot reset. */
4725 return PCI_ERS_RESULT_NEED_RESET
;
4729 * e1000_io_slot_reset - called after the pci bus has been reset.
4730 * @pdev: Pointer to PCI device
4732 * Restart the card from scratch, as if from a cold-boot. Implementation
4733 * resembles the first-half of the e1000_resume routine.
4735 static pci_ers_result_t
e1000_io_slot_reset(struct pci_dev
*pdev
)
4737 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4738 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4739 struct e1000_hw
*hw
= &adapter
->hw
;
4742 if (adapter
->need_ioport
)
4743 err
= pci_enable_device(pdev
);
4745 err
= pci_enable_device_mem(pdev
);
4747 pr_err("Cannot re-enable PCI device after reset.\n");
4748 return PCI_ERS_RESULT_DISCONNECT
;
4750 pci_set_master(pdev
);
4752 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4753 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4755 e1000_reset(adapter
);
4758 return PCI_ERS_RESULT_RECOVERED
;
4762 * e1000_io_resume - called when traffic can start flowing again.
4763 * @pdev: Pointer to PCI device
4765 * This callback is called when the error recovery driver tells us that
4766 * its OK to resume normal operation. Implementation resembles the
4767 * second-half of the e1000_resume routine.
4769 static void e1000_io_resume(struct pci_dev
*pdev
)
4771 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4772 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4774 e1000_init_manageability(adapter
);
4776 if (netif_running(netdev
)) {
4777 if (e1000_up(adapter
)) {
4778 pr_info("can't bring device back up after reset\n");
4783 netif_device_attach(netdev
);