1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 #include <net/ip6_checksum.h>
32 char e1000_driver_name
[] = "e1000";
33 static char e1000_driver_string
[] = "Intel(R) PRO/1000 Network Driver";
34 #define DRV_VERSION "7.3.20-k3-NAPI"
35 const char e1000_driver_version
[] = DRV_VERSION
;
36 static const char e1000_copyright
[] = "Copyright (c) 1999-2006 Intel Corporation.";
38 /* e1000_pci_tbl - PCI Device ID Table
40 * Last entry must be all 0s
43 * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
45 static struct pci_device_id e1000_pci_tbl
[] = {
46 INTEL_E1000_ETHERNET_DEVICE(0x1000),
47 INTEL_E1000_ETHERNET_DEVICE(0x1001),
48 INTEL_E1000_ETHERNET_DEVICE(0x1004),
49 INTEL_E1000_ETHERNET_DEVICE(0x1008),
50 INTEL_E1000_ETHERNET_DEVICE(0x1009),
51 INTEL_E1000_ETHERNET_DEVICE(0x100C),
52 INTEL_E1000_ETHERNET_DEVICE(0x100D),
53 INTEL_E1000_ETHERNET_DEVICE(0x100E),
54 INTEL_E1000_ETHERNET_DEVICE(0x100F),
55 INTEL_E1000_ETHERNET_DEVICE(0x1010),
56 INTEL_E1000_ETHERNET_DEVICE(0x1011),
57 INTEL_E1000_ETHERNET_DEVICE(0x1012),
58 INTEL_E1000_ETHERNET_DEVICE(0x1013),
59 INTEL_E1000_ETHERNET_DEVICE(0x1014),
60 INTEL_E1000_ETHERNET_DEVICE(0x1015),
61 INTEL_E1000_ETHERNET_DEVICE(0x1016),
62 INTEL_E1000_ETHERNET_DEVICE(0x1017),
63 INTEL_E1000_ETHERNET_DEVICE(0x1018),
64 INTEL_E1000_ETHERNET_DEVICE(0x1019),
65 INTEL_E1000_ETHERNET_DEVICE(0x101A),
66 INTEL_E1000_ETHERNET_DEVICE(0x101D),
67 INTEL_E1000_ETHERNET_DEVICE(0x101E),
68 INTEL_E1000_ETHERNET_DEVICE(0x1026),
69 INTEL_E1000_ETHERNET_DEVICE(0x1027),
70 INTEL_E1000_ETHERNET_DEVICE(0x1028),
71 INTEL_E1000_ETHERNET_DEVICE(0x1075),
72 INTEL_E1000_ETHERNET_DEVICE(0x1076),
73 INTEL_E1000_ETHERNET_DEVICE(0x1077),
74 INTEL_E1000_ETHERNET_DEVICE(0x1078),
75 INTEL_E1000_ETHERNET_DEVICE(0x1079),
76 INTEL_E1000_ETHERNET_DEVICE(0x107A),
77 INTEL_E1000_ETHERNET_DEVICE(0x107B),
78 INTEL_E1000_ETHERNET_DEVICE(0x107C),
79 INTEL_E1000_ETHERNET_DEVICE(0x108A),
80 INTEL_E1000_ETHERNET_DEVICE(0x1099),
81 INTEL_E1000_ETHERNET_DEVICE(0x10B5),
82 /* required last entry */
86 MODULE_DEVICE_TABLE(pci
, e1000_pci_tbl
);
88 int e1000_up(struct e1000_adapter
*adapter
);
89 void e1000_down(struct e1000_adapter
*adapter
);
90 void e1000_reinit_locked(struct e1000_adapter
*adapter
);
91 void e1000_reset(struct e1000_adapter
*adapter
);
92 int e1000_set_spd_dplx(struct e1000_adapter
*adapter
, u16 spddplx
);
93 int e1000_setup_all_tx_resources(struct e1000_adapter
*adapter
);
94 int e1000_setup_all_rx_resources(struct e1000_adapter
*adapter
);
95 void e1000_free_all_tx_resources(struct e1000_adapter
*adapter
);
96 void e1000_free_all_rx_resources(struct e1000_adapter
*adapter
);
97 static int e1000_setup_tx_resources(struct e1000_adapter
*adapter
,
98 struct e1000_tx_ring
*txdr
);
99 static int e1000_setup_rx_resources(struct e1000_adapter
*adapter
,
100 struct e1000_rx_ring
*rxdr
);
101 static void e1000_free_tx_resources(struct e1000_adapter
*adapter
,
102 struct e1000_tx_ring
*tx_ring
);
103 static void e1000_free_rx_resources(struct e1000_adapter
*adapter
,
104 struct e1000_rx_ring
*rx_ring
);
105 void e1000_update_stats(struct e1000_adapter
*adapter
);
107 static int e1000_init_module(void);
108 static void e1000_exit_module(void);
109 static int e1000_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
110 static void __devexit
e1000_remove(struct pci_dev
*pdev
);
111 static int e1000_alloc_queues(struct e1000_adapter
*adapter
);
112 static int e1000_sw_init(struct e1000_adapter
*adapter
);
113 static int e1000_open(struct net_device
*netdev
);
114 static int e1000_close(struct net_device
*netdev
);
115 static void e1000_configure_tx(struct e1000_adapter
*adapter
);
116 static void e1000_configure_rx(struct e1000_adapter
*adapter
);
117 static void e1000_setup_rctl(struct e1000_adapter
*adapter
);
118 static void e1000_clean_all_tx_rings(struct e1000_adapter
*adapter
);
119 static void e1000_clean_all_rx_rings(struct e1000_adapter
*adapter
);
120 static void e1000_clean_tx_ring(struct e1000_adapter
*adapter
,
121 struct e1000_tx_ring
*tx_ring
);
122 static void e1000_clean_rx_ring(struct e1000_adapter
*adapter
,
123 struct e1000_rx_ring
*rx_ring
);
124 static void e1000_set_rx_mode(struct net_device
*netdev
);
125 static void e1000_update_phy_info(unsigned long data
);
126 static void e1000_watchdog(unsigned long data
);
127 static void e1000_82547_tx_fifo_stall(unsigned long data
);
128 static int e1000_xmit_frame(struct sk_buff
*skb
, struct net_device
*netdev
);
129 static struct net_device_stats
* e1000_get_stats(struct net_device
*netdev
);
130 static int e1000_change_mtu(struct net_device
*netdev
, int new_mtu
);
131 static int e1000_set_mac(struct net_device
*netdev
, void *p
);
132 static irqreturn_t
e1000_intr(int irq
, void *data
);
133 static irqreturn_t
e1000_intr_msi(int irq
, void *data
);
134 static bool e1000_clean_tx_irq(struct e1000_adapter
*adapter
,
135 struct e1000_tx_ring
*tx_ring
);
136 static int e1000_clean(struct napi_struct
*napi
, int budget
);
137 static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter
,
138 struct e1000_rx_ring
*rx_ring
,
139 int *work_done
, int work_to_do
);
140 static void e1000_alloc_rx_buffers(struct e1000_adapter
*adapter
,
141 struct e1000_rx_ring
*rx_ring
,
143 static int e1000_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
);
144 static int e1000_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
,
146 static void e1000_enter_82542_rst(struct e1000_adapter
*adapter
);
147 static void e1000_leave_82542_rst(struct e1000_adapter
*adapter
);
148 static void e1000_tx_timeout(struct net_device
*dev
);
149 static void e1000_reset_task(struct work_struct
*work
);
150 static void e1000_smartspeed(struct e1000_adapter
*adapter
);
151 static int e1000_82547_fifo_workaround(struct e1000_adapter
*adapter
,
152 struct sk_buff
*skb
);
154 static void e1000_vlan_rx_register(struct net_device
*netdev
, struct vlan_group
*grp
);
155 static void e1000_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
);
156 static void e1000_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
);
157 static void e1000_restore_vlan(struct e1000_adapter
*adapter
);
159 static int e1000_suspend(struct pci_dev
*pdev
, pm_message_t state
);
161 static int e1000_resume(struct pci_dev
*pdev
);
163 static void e1000_shutdown(struct pci_dev
*pdev
);
165 #ifdef CONFIG_NET_POLL_CONTROLLER
166 /* for netdump / net console */
167 static void e1000_netpoll (struct net_device
*netdev
);
170 #define COPYBREAK_DEFAULT 256
171 static unsigned int copybreak __read_mostly
= COPYBREAK_DEFAULT
;
172 module_param(copybreak
, uint
, 0644);
173 MODULE_PARM_DESC(copybreak
,
174 "Maximum size of packet that is copied to a new buffer on receive");
176 static pci_ers_result_t
e1000_io_error_detected(struct pci_dev
*pdev
,
177 pci_channel_state_t state
);
178 static pci_ers_result_t
e1000_io_slot_reset(struct pci_dev
*pdev
);
179 static void e1000_io_resume(struct pci_dev
*pdev
);
181 static struct pci_error_handlers e1000_err_handler
= {
182 .error_detected
= e1000_io_error_detected
,
183 .slot_reset
= e1000_io_slot_reset
,
184 .resume
= e1000_io_resume
,
187 static struct pci_driver e1000_driver
= {
188 .name
= e1000_driver_name
,
189 .id_table
= e1000_pci_tbl
,
190 .probe
= e1000_probe
,
191 .remove
= __devexit_p(e1000_remove
),
193 /* Power Managment Hooks */
194 .suspend
= e1000_suspend
,
195 .resume
= e1000_resume
,
197 .shutdown
= e1000_shutdown
,
198 .err_handler
= &e1000_err_handler
201 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
202 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
203 MODULE_LICENSE("GPL");
204 MODULE_VERSION(DRV_VERSION
);
206 static int debug
= NETIF_MSG_DRV
| NETIF_MSG_PROBE
;
207 module_param(debug
, int, 0);
208 MODULE_PARM_DESC(debug
, "Debug level (0=none,...,16=all)");
211 * e1000_init_module - Driver Registration Routine
213 * e1000_init_module is the first routine called when the driver is
214 * loaded. All it does is register with the PCI subsystem.
217 static int __init
e1000_init_module(void)
220 printk(KERN_INFO
"%s - version %s\n",
221 e1000_driver_string
, e1000_driver_version
);
223 printk(KERN_INFO
"%s\n", e1000_copyright
);
225 ret
= pci_register_driver(&e1000_driver
);
226 if (copybreak
!= COPYBREAK_DEFAULT
) {
228 printk(KERN_INFO
"e1000: copybreak disabled\n");
230 printk(KERN_INFO
"e1000: copybreak enabled for "
231 "packets <= %u bytes\n", copybreak
);
236 module_init(e1000_init_module
);
239 * e1000_exit_module - Driver Exit Cleanup Routine
241 * e1000_exit_module is called just before the driver is removed
245 static void __exit
e1000_exit_module(void)
247 pci_unregister_driver(&e1000_driver
);
250 module_exit(e1000_exit_module
);
252 static int e1000_request_irq(struct e1000_adapter
*adapter
)
254 struct e1000_hw
*hw
= &adapter
->hw
;
255 struct net_device
*netdev
= adapter
->netdev
;
256 irq_handler_t handler
= e1000_intr
;
257 int irq_flags
= IRQF_SHARED
;
260 if (hw
->mac_type
>= e1000_82571
) {
261 adapter
->have_msi
= !pci_enable_msi(adapter
->pdev
);
262 if (adapter
->have_msi
) {
263 handler
= e1000_intr_msi
;
268 err
= request_irq(adapter
->pdev
->irq
, handler
, irq_flags
, netdev
->name
,
271 if (adapter
->have_msi
)
272 pci_disable_msi(adapter
->pdev
);
274 "Unable to allocate interrupt Error: %d\n", err
);
280 static void e1000_free_irq(struct e1000_adapter
*adapter
)
282 struct net_device
*netdev
= adapter
->netdev
;
284 free_irq(adapter
->pdev
->irq
, netdev
);
286 if (adapter
->have_msi
)
287 pci_disable_msi(adapter
->pdev
);
291 * e1000_irq_disable - Mask off interrupt generation on the NIC
292 * @adapter: board private structure
295 static void e1000_irq_disable(struct e1000_adapter
*adapter
)
297 struct e1000_hw
*hw
= &adapter
->hw
;
301 synchronize_irq(adapter
->pdev
->irq
);
305 * e1000_irq_enable - Enable default interrupt generation settings
306 * @adapter: board private structure
309 static void e1000_irq_enable(struct e1000_adapter
*adapter
)
311 struct e1000_hw
*hw
= &adapter
->hw
;
313 ew32(IMS
, IMS_ENABLE_MASK
);
317 static void e1000_update_mng_vlan(struct e1000_adapter
*adapter
)
319 struct e1000_hw
*hw
= &adapter
->hw
;
320 struct net_device
*netdev
= adapter
->netdev
;
321 u16 vid
= hw
->mng_cookie
.vlan_id
;
322 u16 old_vid
= adapter
->mng_vlan_id
;
323 if (adapter
->vlgrp
) {
324 if (!vlan_group_get_device(adapter
->vlgrp
, vid
)) {
325 if (hw
->mng_cookie
.status
&
326 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) {
327 e1000_vlan_rx_add_vid(netdev
, vid
);
328 adapter
->mng_vlan_id
= vid
;
330 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
332 if ((old_vid
!= (u16
)E1000_MNG_VLAN_NONE
) &&
334 !vlan_group_get_device(adapter
->vlgrp
, old_vid
))
335 e1000_vlan_rx_kill_vid(netdev
, old_vid
);
337 adapter
->mng_vlan_id
= vid
;
342 * e1000_release_hw_control - release control of the h/w to f/w
343 * @adapter: address of board private structure
345 * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
346 * For ASF and Pass Through versions of f/w this means that the
347 * driver is no longer loaded. For AMT version (only with 82573) i
348 * of the f/w this means that the network i/f is closed.
352 static void e1000_release_hw_control(struct e1000_adapter
*adapter
)
356 struct e1000_hw
*hw
= &adapter
->hw
;
358 /* Let firmware taken over control of h/w */
359 switch (hw
->mac_type
) {
362 ew32(SWSM
, swsm
& ~E1000_SWSM_DRV_LOAD
);
366 case e1000_80003es2lan
:
368 ctrl_ext
= er32(CTRL_EXT
);
369 ew32(CTRL_EXT
, ctrl_ext
& ~E1000_CTRL_EXT_DRV_LOAD
);
377 * e1000_get_hw_control - get control of the h/w from f/w
378 * @adapter: address of board private structure
380 * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
381 * For ASF and Pass Through versions of f/w this means that
382 * the driver is loaded. For AMT version (only with 82573)
383 * of the f/w this means that the network i/f is open.
387 static void e1000_get_hw_control(struct e1000_adapter
*adapter
)
391 struct e1000_hw
*hw
= &adapter
->hw
;
393 /* Let firmware know the driver has taken over */
394 switch (hw
->mac_type
) {
397 ew32(SWSM
, swsm
| E1000_SWSM_DRV_LOAD
);
401 case e1000_80003es2lan
:
403 ctrl_ext
= er32(CTRL_EXT
);
404 ew32(CTRL_EXT
, ctrl_ext
| E1000_CTRL_EXT_DRV_LOAD
);
411 static void e1000_init_manageability(struct e1000_adapter
*adapter
)
413 struct e1000_hw
*hw
= &adapter
->hw
;
415 if (adapter
->en_mng_pt
) {
416 u32 manc
= er32(MANC
);
418 /* disable hardware interception of ARP */
419 manc
&= ~(E1000_MANC_ARP_EN
);
421 /* enable receiving management packets to the host */
422 /* this will probably generate destination unreachable messages
423 * from the host OS, but the packets will be handled on SMBUS */
424 if (hw
->has_manc2h
) {
425 u32 manc2h
= er32(MANC2H
);
427 manc
|= E1000_MANC_EN_MNG2HOST
;
428 #define E1000_MNG2HOST_PORT_623 (1 << 5)
429 #define E1000_MNG2HOST_PORT_664 (1 << 6)
430 manc2h
|= E1000_MNG2HOST_PORT_623
;
431 manc2h
|= E1000_MNG2HOST_PORT_664
;
432 ew32(MANC2H
, manc2h
);
439 static void e1000_release_manageability(struct e1000_adapter
*adapter
)
441 struct e1000_hw
*hw
= &adapter
->hw
;
443 if (adapter
->en_mng_pt
) {
444 u32 manc
= er32(MANC
);
446 /* re-enable hardware interception of ARP */
447 manc
|= E1000_MANC_ARP_EN
;
450 manc
&= ~E1000_MANC_EN_MNG2HOST
;
452 /* don't explicitly have to mess with MANC2H since
453 * MANC has an enable disable that gates MANC2H */
460 * e1000_configure - configure the hardware for RX and TX
461 * @adapter = private board structure
463 static void e1000_configure(struct e1000_adapter
*adapter
)
465 struct net_device
*netdev
= adapter
->netdev
;
468 e1000_set_rx_mode(netdev
);
470 e1000_restore_vlan(adapter
);
471 e1000_init_manageability(adapter
);
473 e1000_configure_tx(adapter
);
474 e1000_setup_rctl(adapter
);
475 e1000_configure_rx(adapter
);
476 /* call E1000_DESC_UNUSED which always leaves
477 * at least 1 descriptor unused to make sure
478 * next_to_use != next_to_clean */
479 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
480 struct e1000_rx_ring
*ring
= &adapter
->rx_ring
[i
];
481 adapter
->alloc_rx_buf(adapter
, ring
,
482 E1000_DESC_UNUSED(ring
));
485 adapter
->tx_queue_len
= netdev
->tx_queue_len
;
488 int e1000_up(struct e1000_adapter
*adapter
)
490 struct e1000_hw
*hw
= &adapter
->hw
;
492 /* hardware has been reset, we need to reload some things */
493 e1000_configure(adapter
);
495 clear_bit(__E1000_DOWN
, &adapter
->flags
);
497 napi_enable(&adapter
->napi
);
499 e1000_irq_enable(adapter
);
501 /* fire a link change interrupt to start the watchdog */
502 ew32(ICS
, E1000_ICS_LSC
);
507 * e1000_power_up_phy - restore link in case the phy was powered down
508 * @adapter: address of board private structure
510 * The phy may be powered down to save power and turn off link when the
511 * driver is unloaded and wake on lan is not enabled (among others)
512 * *** this routine MUST be followed by a call to e1000_reset ***
516 void e1000_power_up_phy(struct e1000_adapter
*adapter
)
518 struct e1000_hw
*hw
= &adapter
->hw
;
521 /* Just clear the power down bit to wake the phy back up */
522 if (hw
->media_type
== e1000_media_type_copper
) {
523 /* according to the manual, the phy will retain its
524 * settings across a power-down/up cycle */
525 e1000_read_phy_reg(hw
, PHY_CTRL
, &mii_reg
);
526 mii_reg
&= ~MII_CR_POWER_DOWN
;
527 e1000_write_phy_reg(hw
, PHY_CTRL
, mii_reg
);
531 static void e1000_power_down_phy(struct e1000_adapter
*adapter
)
533 struct e1000_hw
*hw
= &adapter
->hw
;
535 /* Power down the PHY so no link is implied when interface is down *
536 * The PHY cannot be powered down if any of the following is true *
539 * (c) SoL/IDER session is active */
540 if (!adapter
->wol
&& hw
->mac_type
>= e1000_82540
&&
541 hw
->media_type
== e1000_media_type_copper
) {
544 switch (hw
->mac_type
) {
547 case e1000_82545_rev_3
:
549 case e1000_82546_rev_3
:
551 case e1000_82541_rev_2
:
553 case e1000_82547_rev_2
:
554 if (er32(MANC
) & E1000_MANC_SMBUS_EN
)
560 case e1000_80003es2lan
:
562 if (e1000_check_mng_mode(hw
) ||
563 e1000_check_phy_reset_block(hw
))
569 e1000_read_phy_reg(hw
, PHY_CTRL
, &mii_reg
);
570 mii_reg
|= MII_CR_POWER_DOWN
;
571 e1000_write_phy_reg(hw
, PHY_CTRL
, mii_reg
);
578 void e1000_down(struct e1000_adapter
*adapter
)
580 struct net_device
*netdev
= adapter
->netdev
;
582 /* signal that we're down so the interrupt handler does not
583 * reschedule our watchdog timer */
584 set_bit(__E1000_DOWN
, &adapter
->flags
);
586 napi_disable(&adapter
->napi
);
588 e1000_irq_disable(adapter
);
590 del_timer_sync(&adapter
->tx_fifo_stall_timer
);
591 del_timer_sync(&adapter
->watchdog_timer
);
592 del_timer_sync(&adapter
->phy_info_timer
);
594 netdev
->tx_queue_len
= adapter
->tx_queue_len
;
595 adapter
->link_speed
= 0;
596 adapter
->link_duplex
= 0;
597 netif_carrier_off(netdev
);
598 netif_stop_queue(netdev
);
600 e1000_reset(adapter
);
601 e1000_clean_all_tx_rings(adapter
);
602 e1000_clean_all_rx_rings(adapter
);
605 void e1000_reinit_locked(struct e1000_adapter
*adapter
)
607 WARN_ON(in_interrupt());
608 while (test_and_set_bit(__E1000_RESETTING
, &adapter
->flags
))
612 clear_bit(__E1000_RESETTING
, &adapter
->flags
);
615 void e1000_reset(struct e1000_adapter
*adapter
)
617 struct e1000_hw
*hw
= &adapter
->hw
;
618 u32 pba
= 0, tx_space
, min_tx_space
, min_rx_space
;
619 u16 fc_high_water_mark
= E1000_FC_HIGH_DIFF
;
620 bool legacy_pba_adjust
= false;
622 /* Repartition Pba for greater than 9k mtu
623 * To take effect CTRL.RST is required.
626 switch (hw
->mac_type
) {
627 case e1000_82542_rev2_0
:
628 case e1000_82542_rev2_1
:
633 case e1000_82541_rev_2
:
634 legacy_pba_adjust
= true;
638 case e1000_82545_rev_3
:
640 case e1000_82546_rev_3
:
644 case e1000_82547_rev_2
:
645 legacy_pba_adjust
= true;
650 case e1000_80003es2lan
:
658 case e1000_undefined
:
663 if (legacy_pba_adjust
) {
664 if (adapter
->netdev
->mtu
> E1000_RXBUFFER_8192
)
665 pba
-= 8; /* allocate more FIFO for Tx */
667 if (hw
->mac_type
== e1000_82547
) {
668 adapter
->tx_fifo_head
= 0;
669 adapter
->tx_head_addr
= pba
<< E1000_TX_HEAD_ADDR_SHIFT
;
670 adapter
->tx_fifo_size
=
671 (E1000_PBA_40K
- pba
) << E1000_PBA_BYTES_SHIFT
;
672 atomic_set(&adapter
->tx_fifo_stall
, 0);
674 } else if (hw
->max_frame_size
> MAXIMUM_ETHERNET_FRAME_SIZE
) {
675 /* adjust PBA for jumbo frames */
678 /* To maintain wire speed transmits, the Tx FIFO should be
679 * large enough to accomodate two full transmit packets,
680 * rounded up to the next 1KB and expressed in KB. Likewise,
681 * the Rx FIFO should be large enough to accomodate at least
682 * one full receive packet and is similarly rounded up and
683 * expressed in KB. */
685 /* upper 16 bits has Tx packet buffer allocation size in KB */
686 tx_space
= pba
>> 16;
687 /* lower 16 bits has Rx packet buffer allocation size in KB */
689 /* don't include ethernet FCS because hardware appends/strips */
690 min_rx_space
= adapter
->netdev
->mtu
+ ENET_HEADER_SIZE
+
692 min_tx_space
= min_rx_space
;
694 min_tx_space
= ALIGN(min_tx_space
, 1024);
696 min_rx_space
= ALIGN(min_rx_space
, 1024);
699 /* If current Tx allocation is less than the min Tx FIFO size,
700 * and the min Tx FIFO size is less than the current Rx FIFO
701 * allocation, take space away from current Rx allocation */
702 if (tx_space
< min_tx_space
&&
703 ((min_tx_space
- tx_space
) < pba
)) {
704 pba
= pba
- (min_tx_space
- tx_space
);
706 /* PCI/PCIx hardware has PBA alignment constraints */
707 switch (hw
->mac_type
) {
708 case e1000_82545
... e1000_82546_rev_3
:
709 pba
&= ~(E1000_PBA_8K
- 1);
715 /* if short on rx space, rx wins and must trump tx
716 * adjustment or use Early Receive if available */
717 if (pba
< min_rx_space
) {
718 switch (hw
->mac_type
) {
720 /* ERT enabled in e1000_configure_rx */
732 /* flow control settings */
733 /* Set the FC high water mark to 90% of the FIFO size.
734 * Required to clear last 3 LSB */
735 fc_high_water_mark
= ((pba
* 9216)/10) & 0xFFF8;
736 /* We can't use 90% on small FIFOs because the remainder
737 * would be less than 1 full frame. In this case, we size
738 * it to allow at least a full frame above the high water
740 if (pba
< E1000_PBA_16K
)
741 fc_high_water_mark
= (pba
* 1024) - 1600;
743 hw
->fc_high_water
= fc_high_water_mark
;
744 hw
->fc_low_water
= fc_high_water_mark
- 8;
745 if (hw
->mac_type
== e1000_80003es2lan
)
746 hw
->fc_pause_time
= 0xFFFF;
748 hw
->fc_pause_time
= E1000_FC_PAUSE_TIME
;
750 hw
->fc
= hw
->original_fc
;
752 /* Allow time for pending master requests to run */
754 if (hw
->mac_type
>= e1000_82544
)
757 if (e1000_init_hw(hw
))
758 DPRINTK(PROBE
, ERR
, "Hardware Error\n");
759 e1000_update_mng_vlan(adapter
);
761 /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
762 if (hw
->mac_type
>= e1000_82544
&&
763 hw
->mac_type
<= e1000_82547_rev_2
&&
765 hw
->autoneg_advertised
== ADVERTISE_1000_FULL
) {
766 u32 ctrl
= er32(CTRL
);
767 /* clear phy power management bit if we are in gig only mode,
768 * which if enabled will attempt negotiation to 100Mb, which
769 * can cause a loss of link at power off or driver unload */
770 ctrl
&= ~E1000_CTRL_SWDPIN3
;
774 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
775 ew32(VET
, ETHERNET_IEEE_VLAN_TYPE
);
777 e1000_reset_adaptive(hw
);
778 e1000_phy_get_info(hw
, &adapter
->phy_info
);
780 if (!adapter
->smart_power_down
&&
781 (hw
->mac_type
== e1000_82571
||
782 hw
->mac_type
== e1000_82572
)) {
784 /* speed up time to link by disabling smart power down, ignore
785 * the return value of this function because there is nothing
786 * different we would do if it failed */
787 e1000_read_phy_reg(hw
, IGP02E1000_PHY_POWER_MGMT
,
789 phy_data
&= ~IGP02E1000_PM_SPD
;
790 e1000_write_phy_reg(hw
, IGP02E1000_PHY_POWER_MGMT
,
794 e1000_release_manageability(adapter
);
798 * Dump the eeprom for users having checksum issues
800 static void e1000_dump_eeprom(struct e1000_adapter
*adapter
)
802 struct net_device
*netdev
= adapter
->netdev
;
803 struct ethtool_eeprom eeprom
;
804 const struct ethtool_ops
*ops
= netdev
->ethtool_ops
;
807 u16 csum_old
, csum_new
= 0;
809 eeprom
.len
= ops
->get_eeprom_len(netdev
);
812 data
= kmalloc(eeprom
.len
, GFP_KERNEL
);
814 printk(KERN_ERR
"Unable to allocate memory to dump EEPROM"
819 ops
->get_eeprom(netdev
, &eeprom
, data
);
821 csum_old
= (data
[EEPROM_CHECKSUM_REG
* 2]) +
822 (data
[EEPROM_CHECKSUM_REG
* 2 + 1] << 8);
823 for (i
= 0; i
< EEPROM_CHECKSUM_REG
* 2; i
+= 2)
824 csum_new
+= data
[i
] + (data
[i
+ 1] << 8);
825 csum_new
= EEPROM_SUM
- csum_new
;
827 printk(KERN_ERR
"/*********************/\n");
828 printk(KERN_ERR
"Current EEPROM Checksum : 0x%04x\n", csum_old
);
829 printk(KERN_ERR
"Calculated : 0x%04x\n", csum_new
);
831 printk(KERN_ERR
"Offset Values\n");
832 printk(KERN_ERR
"======== ======\n");
833 print_hex_dump(KERN_ERR
, "", DUMP_PREFIX_OFFSET
, 16, 1, data
, 128, 0);
835 printk(KERN_ERR
"Include this output when contacting your support "
837 printk(KERN_ERR
"This is not a software error! Something bad "
838 "happened to your hardware or\n");
839 printk(KERN_ERR
"EEPROM image. Ignoring this "
840 "problem could result in further problems,\n");
841 printk(KERN_ERR
"possibly loss of data, corruption or system hangs!\n");
842 printk(KERN_ERR
"The MAC Address will be reset to 00:00:00:00:00:00, "
843 "which is invalid\n");
844 printk(KERN_ERR
"and requires you to set the proper MAC "
845 "address manually before continuing\n");
846 printk(KERN_ERR
"to enable this network device.\n");
847 printk(KERN_ERR
"Please inspect the EEPROM dump and report the issue "
848 "to your hardware vendor\n");
849 printk(KERN_ERR
"or Intel Customer Support.\n");
850 printk(KERN_ERR
"/*********************/\n");
856 * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
857 * @pdev: PCI device information struct
859 * Return true if an adapter needs ioport resources
861 static int e1000_is_need_ioport(struct pci_dev
*pdev
)
863 switch (pdev
->device
) {
864 case E1000_DEV_ID_82540EM
:
865 case E1000_DEV_ID_82540EM_LOM
:
866 case E1000_DEV_ID_82540EP
:
867 case E1000_DEV_ID_82540EP_LOM
:
868 case E1000_DEV_ID_82540EP_LP
:
869 case E1000_DEV_ID_82541EI
:
870 case E1000_DEV_ID_82541EI_MOBILE
:
871 case E1000_DEV_ID_82541ER
:
872 case E1000_DEV_ID_82541ER_LOM
:
873 case E1000_DEV_ID_82541GI
:
874 case E1000_DEV_ID_82541GI_LF
:
875 case E1000_DEV_ID_82541GI_MOBILE
:
876 case E1000_DEV_ID_82544EI_COPPER
:
877 case E1000_DEV_ID_82544EI_FIBER
:
878 case E1000_DEV_ID_82544GC_COPPER
:
879 case E1000_DEV_ID_82544GC_LOM
:
880 case E1000_DEV_ID_82545EM_COPPER
:
881 case E1000_DEV_ID_82545EM_FIBER
:
882 case E1000_DEV_ID_82546EB_COPPER
:
883 case E1000_DEV_ID_82546EB_FIBER
:
884 case E1000_DEV_ID_82546EB_QUAD_COPPER
:
891 static const struct net_device_ops e1000_netdev_ops
= {
892 .ndo_open
= e1000_open
,
893 .ndo_stop
= e1000_close
,
894 .ndo_start_xmit
= e1000_xmit_frame
,
895 .ndo_get_stats
= e1000_get_stats
,
896 .ndo_set_rx_mode
= e1000_set_rx_mode
,
897 .ndo_set_mac_address
= e1000_set_mac
,
898 .ndo_tx_timeout
= e1000_tx_timeout
,
899 .ndo_change_mtu
= e1000_change_mtu
,
900 .ndo_do_ioctl
= e1000_ioctl
,
901 .ndo_validate_addr
= eth_validate_addr
,
903 .ndo_vlan_rx_register
= e1000_vlan_rx_register
,
904 .ndo_vlan_rx_add_vid
= e1000_vlan_rx_add_vid
,
905 .ndo_vlan_rx_kill_vid
= e1000_vlan_rx_kill_vid
,
906 #ifdef CONFIG_NET_POLL_CONTROLLER
907 .ndo_poll_controller
= e1000_netpoll
,
912 * e1000_probe - Device Initialization Routine
913 * @pdev: PCI device information struct
914 * @ent: entry in e1000_pci_tbl
916 * Returns 0 on success, negative on failure
918 * e1000_probe initializes an adapter identified by a pci_dev structure.
919 * The OS initialization, configuring of the adapter private structure,
920 * and a hardware reset occur.
922 static int __devinit
e1000_probe(struct pci_dev
*pdev
,
923 const struct pci_device_id
*ent
)
925 struct net_device
*netdev
;
926 struct e1000_adapter
*adapter
;
929 static int cards_found
= 0;
930 static int global_quad_port_a
= 0; /* global ksp3 port a indication */
931 int i
, err
, pci_using_dac
;
933 u16 eeprom_apme_mask
= E1000_EEPROM_APME
;
934 int bars
, need_ioport
;
936 /* do not allocate ioport bars when not needed */
937 need_ioport
= e1000_is_need_ioport(pdev
);
939 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
| IORESOURCE_IO
);
940 err
= pci_enable_device(pdev
);
942 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
943 err
= pci_enable_device(pdev
);
948 if (!pci_set_dma_mask(pdev
, DMA_64BIT_MASK
) &&
949 !pci_set_consistent_dma_mask(pdev
, DMA_64BIT_MASK
)) {
952 err
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
954 err
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
956 E1000_ERR("No usable DMA configuration, "
964 err
= pci_request_selected_regions(pdev
, bars
, e1000_driver_name
);
968 pci_set_master(pdev
);
971 netdev
= alloc_etherdev(sizeof(struct e1000_adapter
));
973 goto err_alloc_etherdev
;
975 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
977 pci_set_drvdata(pdev
, netdev
);
978 adapter
= netdev_priv(netdev
);
979 adapter
->netdev
= netdev
;
980 adapter
->pdev
= pdev
;
981 adapter
->msg_enable
= (1 << debug
) - 1;
982 adapter
->bars
= bars
;
983 adapter
->need_ioport
= need_ioport
;
989 hw
->hw_addr
= pci_ioremap_bar(pdev
, BAR_0
);
993 if (adapter
->need_ioport
) {
994 for (i
= BAR_1
; i
<= BAR_5
; i
++) {
995 if (pci_resource_len(pdev
, i
) == 0)
997 if (pci_resource_flags(pdev
, i
) & IORESOURCE_IO
) {
998 hw
->io_base
= pci_resource_start(pdev
, i
);
1004 netdev
->netdev_ops
= &e1000_netdev_ops
;
1005 e1000_set_ethtool_ops(netdev
);
1006 netdev
->watchdog_timeo
= 5 * HZ
;
1007 netif_napi_add(netdev
, &adapter
->napi
, e1000_clean
, 64);
1009 strncpy(netdev
->name
, pci_name(pdev
), sizeof(netdev
->name
) - 1);
1011 adapter
->bd_number
= cards_found
;
1013 /* setup the private structure */
1015 err
= e1000_sw_init(adapter
);
1020 /* Flash BAR mapping must happen after e1000_sw_init
1021 * because it depends on mac_type */
1022 if ((hw
->mac_type
== e1000_ich8lan
) &&
1023 (pci_resource_flags(pdev
, 1) & IORESOURCE_MEM
)) {
1024 hw
->flash_address
= pci_ioremap_bar(pdev
, 1);
1025 if (!hw
->flash_address
)
1029 if (e1000_check_phy_reset_block(hw
))
1030 DPRINTK(PROBE
, INFO
, "PHY reset is blocked due to SOL/IDER session.\n");
1032 if (hw
->mac_type
>= e1000_82543
) {
1033 netdev
->features
= NETIF_F_SG
|
1035 NETIF_F_HW_VLAN_TX
|
1036 NETIF_F_HW_VLAN_RX
|
1037 NETIF_F_HW_VLAN_FILTER
;
1038 if (hw
->mac_type
== e1000_ich8lan
)
1039 netdev
->features
&= ~NETIF_F_HW_VLAN_FILTER
;
1042 if ((hw
->mac_type
>= e1000_82544
) &&
1043 (hw
->mac_type
!= e1000_82547
))
1044 netdev
->features
|= NETIF_F_TSO
;
1046 if (hw
->mac_type
> e1000_82547_rev_2
)
1047 netdev
->features
|= NETIF_F_TSO6
;
1049 netdev
->features
|= NETIF_F_HIGHDMA
;
1051 netdev
->features
|= NETIF_F_LLTX
;
1053 netdev
->vlan_features
|= NETIF_F_TSO
;
1054 netdev
->vlan_features
|= NETIF_F_TSO6
;
1055 netdev
->vlan_features
|= NETIF_F_HW_CSUM
;
1056 netdev
->vlan_features
|= NETIF_F_SG
;
1058 adapter
->en_mng_pt
= e1000_enable_mng_pass_thru(hw
);
1060 /* initialize eeprom parameters */
1061 if (e1000_init_eeprom_params(hw
)) {
1062 E1000_ERR("EEPROM initialization failed\n");
1066 /* before reading the EEPROM, reset the controller to
1067 * put the device in a known good starting state */
1071 /* make sure the EEPROM is good */
1072 if (e1000_validate_eeprom_checksum(hw
) < 0) {
1073 DPRINTK(PROBE
, ERR
, "The EEPROM Checksum Is Not Valid\n");
1074 e1000_dump_eeprom(adapter
);
1076 * set MAC address to all zeroes to invalidate and temporary
1077 * disable this device for the user. This blocks regular
1078 * traffic while still permitting ethtool ioctls from reaching
1079 * the hardware as well as allowing the user to run the
1080 * interface after manually setting a hw addr using
1083 memset(hw
->mac_addr
, 0, netdev
->addr_len
);
1085 /* copy the MAC address out of the EEPROM */
1086 if (e1000_read_mac_addr(hw
))
1087 DPRINTK(PROBE
, ERR
, "EEPROM Read Error\n");
1089 /* don't block initalization here due to bad MAC address */
1090 memcpy(netdev
->dev_addr
, hw
->mac_addr
, netdev
->addr_len
);
1091 memcpy(netdev
->perm_addr
, hw
->mac_addr
, netdev
->addr_len
);
1093 if (!is_valid_ether_addr(netdev
->perm_addr
))
1094 DPRINTK(PROBE
, ERR
, "Invalid MAC Address\n");
1096 e1000_get_bus_info(hw
);
1098 init_timer(&adapter
->tx_fifo_stall_timer
);
1099 adapter
->tx_fifo_stall_timer
.function
= &e1000_82547_tx_fifo_stall
;
1100 adapter
->tx_fifo_stall_timer
.data
= (unsigned long)adapter
;
1102 init_timer(&adapter
->watchdog_timer
);
1103 adapter
->watchdog_timer
.function
= &e1000_watchdog
;
1104 adapter
->watchdog_timer
.data
= (unsigned long) adapter
;
1106 init_timer(&adapter
->phy_info_timer
);
1107 adapter
->phy_info_timer
.function
= &e1000_update_phy_info
;
1108 adapter
->phy_info_timer
.data
= (unsigned long)adapter
;
1110 INIT_WORK(&adapter
->reset_task
, e1000_reset_task
);
1112 e1000_check_options(adapter
);
1114 /* Initial Wake on LAN setting
1115 * If APM wake is enabled in the EEPROM,
1116 * enable the ACPI Magic Packet filter
1119 switch (hw
->mac_type
) {
1120 case e1000_82542_rev2_0
:
1121 case e1000_82542_rev2_1
:
1125 e1000_read_eeprom(hw
,
1126 EEPROM_INIT_CONTROL2_REG
, 1, &eeprom_data
);
1127 eeprom_apme_mask
= E1000_EEPROM_82544_APM
;
1130 e1000_read_eeprom(hw
,
1131 EEPROM_INIT_CONTROL1_REG
, 1, &eeprom_data
);
1132 eeprom_apme_mask
= E1000_EEPROM_ICH8_APME
;
1135 case e1000_82546_rev_3
:
1137 case e1000_80003es2lan
:
1138 if (er32(STATUS
) & E1000_STATUS_FUNC_1
){
1139 e1000_read_eeprom(hw
,
1140 EEPROM_INIT_CONTROL3_PORT_B
, 1, &eeprom_data
);
1145 e1000_read_eeprom(hw
,
1146 EEPROM_INIT_CONTROL3_PORT_A
, 1, &eeprom_data
);
1149 if (eeprom_data
& eeprom_apme_mask
)
1150 adapter
->eeprom_wol
|= E1000_WUFC_MAG
;
1152 /* now that we have the eeprom settings, apply the special cases
1153 * where the eeprom may be wrong or the board simply won't support
1154 * wake on lan on a particular port */
1155 switch (pdev
->device
) {
1156 case E1000_DEV_ID_82546GB_PCIE
:
1157 adapter
->eeprom_wol
= 0;
1159 case E1000_DEV_ID_82546EB_FIBER
:
1160 case E1000_DEV_ID_82546GB_FIBER
:
1161 case E1000_DEV_ID_82571EB_FIBER
:
1162 /* Wake events only supported on port A for dual fiber
1163 * regardless of eeprom setting */
1164 if (er32(STATUS
) & E1000_STATUS_FUNC_1
)
1165 adapter
->eeprom_wol
= 0;
1167 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3
:
1168 case E1000_DEV_ID_82571EB_QUAD_COPPER
:
1169 case E1000_DEV_ID_82571EB_QUAD_FIBER
:
1170 case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE
:
1171 case E1000_DEV_ID_82571PT_QUAD_COPPER
:
1172 /* if quad port adapter, disable WoL on all but port A */
1173 if (global_quad_port_a
!= 0)
1174 adapter
->eeprom_wol
= 0;
1176 adapter
->quad_port_a
= 1;
1177 /* Reset for multiple quad port adapters */
1178 if (++global_quad_port_a
== 4)
1179 global_quad_port_a
= 0;
1183 /* initialize the wol settings based on the eeprom settings */
1184 adapter
->wol
= adapter
->eeprom_wol
;
1185 device_set_wakeup_enable(&adapter
->pdev
->dev
, adapter
->wol
);
1187 /* print bus type/speed/width info */
1188 DPRINTK(PROBE
, INFO
, "(PCI%s:%s:%s) ",
1189 ((hw
->bus_type
== e1000_bus_type_pcix
) ? "-X" :
1190 (hw
->bus_type
== e1000_bus_type_pci_express
? " Express":"")),
1191 ((hw
->bus_speed
== e1000_bus_speed_2500
) ? "2.5Gb/s" :
1192 (hw
->bus_speed
== e1000_bus_speed_133
) ? "133MHz" :
1193 (hw
->bus_speed
== e1000_bus_speed_120
) ? "120MHz" :
1194 (hw
->bus_speed
== e1000_bus_speed_100
) ? "100MHz" :
1195 (hw
->bus_speed
== e1000_bus_speed_66
) ? "66MHz" : "33MHz"),
1196 ((hw
->bus_width
== e1000_bus_width_64
) ? "64-bit" :
1197 (hw
->bus_width
== e1000_bus_width_pciex_4
) ? "Width x4" :
1198 (hw
->bus_width
== e1000_bus_width_pciex_1
) ? "Width x1" :
1201 printk("%pM\n", netdev
->dev_addr
);
1203 if (hw
->bus_type
== e1000_bus_type_pci_express
) {
1204 DPRINTK(PROBE
, WARNING
, "This device (id %04x:%04x) will no "
1205 "longer be supported by this driver in the future.\n",
1206 pdev
->vendor
, pdev
->device
);
1207 DPRINTK(PROBE
, WARNING
, "please use the \"e1000e\" "
1208 "driver instead.\n");
1211 /* reset the hardware with the new settings */
1212 e1000_reset(adapter
);
1214 /* If the controller is 82573 and f/w is AMT, do not set
1215 * DRV_LOAD until the interface is up. For all other cases,
1216 * let the f/w know that the h/w is now under the control
1218 if (hw
->mac_type
!= e1000_82573
||
1219 !e1000_check_mng_mode(hw
))
1220 e1000_get_hw_control(adapter
);
1222 /* tell the stack to leave us alone until e1000_open() is called */
1223 netif_carrier_off(netdev
);
1224 netif_stop_queue(netdev
);
1226 strcpy(netdev
->name
, "eth%d");
1227 err
= register_netdev(netdev
);
1231 DPRINTK(PROBE
, INFO
, "Intel(R) PRO/1000 Network Connection\n");
1237 e1000_release_hw_control(adapter
);
1239 if (!e1000_check_phy_reset_block(hw
))
1240 e1000_phy_hw_reset(hw
);
1242 if (hw
->flash_address
)
1243 iounmap(hw
->flash_address
);
1245 kfree(adapter
->tx_ring
);
1246 kfree(adapter
->rx_ring
);
1248 iounmap(hw
->hw_addr
);
1250 free_netdev(netdev
);
1252 pci_release_selected_regions(pdev
, bars
);
1255 pci_disable_device(pdev
);
1260 * e1000_remove - Device Removal Routine
1261 * @pdev: PCI device information struct
1263 * e1000_remove is called by the PCI subsystem to alert the driver
1264 * that it should release a PCI device. The could be caused by a
1265 * Hot-Plug event, or because the driver is going to be removed from
1269 static void __devexit
e1000_remove(struct pci_dev
*pdev
)
1271 struct net_device
*netdev
= pci_get_drvdata(pdev
);
1272 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1273 struct e1000_hw
*hw
= &adapter
->hw
;
1275 cancel_work_sync(&adapter
->reset_task
);
1277 e1000_release_manageability(adapter
);
1279 /* Release control of h/w to f/w. If f/w is AMT enabled, this
1280 * would have already happened in close and is redundant. */
1281 e1000_release_hw_control(adapter
);
1283 unregister_netdev(netdev
);
1285 if (!e1000_check_phy_reset_block(hw
))
1286 e1000_phy_hw_reset(hw
);
1288 kfree(adapter
->tx_ring
);
1289 kfree(adapter
->rx_ring
);
1291 iounmap(hw
->hw_addr
);
1292 if (hw
->flash_address
)
1293 iounmap(hw
->flash_address
);
1294 pci_release_selected_regions(pdev
, adapter
->bars
);
1296 free_netdev(netdev
);
1298 pci_disable_device(pdev
);
1302 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1303 * @adapter: board private structure to initialize
1305 * e1000_sw_init initializes the Adapter private data structure.
1306 * Fields are initialized based on PCI device information and
1307 * OS network device settings (MTU size).
1310 static int __devinit
e1000_sw_init(struct e1000_adapter
*adapter
)
1312 struct e1000_hw
*hw
= &adapter
->hw
;
1313 struct net_device
*netdev
= adapter
->netdev
;
1314 struct pci_dev
*pdev
= adapter
->pdev
;
1316 /* PCI config space info */
1318 hw
->vendor_id
= pdev
->vendor
;
1319 hw
->device_id
= pdev
->device
;
1320 hw
->subsystem_vendor_id
= pdev
->subsystem_vendor
;
1321 hw
->subsystem_id
= pdev
->subsystem_device
;
1322 hw
->revision_id
= pdev
->revision
;
1324 pci_read_config_word(pdev
, PCI_COMMAND
, &hw
->pci_cmd_word
);
1326 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
1327 hw
->max_frame_size
= netdev
->mtu
+
1328 ENET_HEADER_SIZE
+ ETHERNET_FCS_SIZE
;
1329 hw
->min_frame_size
= MINIMUM_ETHERNET_FRAME_SIZE
;
1331 /* identify the MAC */
1333 if (e1000_set_mac_type(hw
)) {
1334 DPRINTK(PROBE
, ERR
, "Unknown MAC Type\n");
1338 switch (hw
->mac_type
) {
1343 case e1000_82541_rev_2
:
1344 case e1000_82547_rev_2
:
1345 hw
->phy_init_script
= 1;
1349 e1000_set_media_type(hw
);
1351 hw
->wait_autoneg_complete
= false;
1352 hw
->tbi_compatibility_en
= true;
1353 hw
->adaptive_ifs
= true;
1355 /* Copper options */
1357 if (hw
->media_type
== e1000_media_type_copper
) {
1358 hw
->mdix
= AUTO_ALL_MODES
;
1359 hw
->disable_polarity_correction
= false;
1360 hw
->master_slave
= E1000_MASTER_SLAVE
;
1363 adapter
->num_tx_queues
= 1;
1364 adapter
->num_rx_queues
= 1;
1366 if (e1000_alloc_queues(adapter
)) {
1367 DPRINTK(PROBE
, ERR
, "Unable to allocate memory for queues\n");
1371 spin_lock_init(&adapter
->tx_queue_lock
);
1373 /* Explicitly disable IRQ since the NIC can be in any state. */
1374 e1000_irq_disable(adapter
);
1376 spin_lock_init(&adapter
->stats_lock
);
1378 set_bit(__E1000_DOWN
, &adapter
->flags
);
1384 * e1000_alloc_queues - Allocate memory for all rings
1385 * @adapter: board private structure to initialize
1387 * We allocate one ring per queue at run-time since we don't know the
1388 * number of queues at compile-time.
1391 static int __devinit
e1000_alloc_queues(struct e1000_adapter
*adapter
)
1393 adapter
->tx_ring
= kcalloc(adapter
->num_tx_queues
,
1394 sizeof(struct e1000_tx_ring
), GFP_KERNEL
);
1395 if (!adapter
->tx_ring
)
1398 adapter
->rx_ring
= kcalloc(adapter
->num_rx_queues
,
1399 sizeof(struct e1000_rx_ring
), GFP_KERNEL
);
1400 if (!adapter
->rx_ring
) {
1401 kfree(adapter
->tx_ring
);
1405 return E1000_SUCCESS
;
1409 * e1000_open - Called when a network interface is made active
1410 * @netdev: network interface device structure
1412 * Returns 0 on success, negative value on failure
1414 * The open entry point is called when a network interface is made
1415 * active by the system (IFF_UP). At this point all resources needed
1416 * for transmit and receive operations are allocated, the interrupt
1417 * handler is registered with the OS, the watchdog timer is started,
1418 * and the stack is notified that the interface is ready.
1421 static int e1000_open(struct net_device
*netdev
)
1423 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1424 struct e1000_hw
*hw
= &adapter
->hw
;
1427 /* disallow open during test */
1428 if (test_bit(__E1000_TESTING
, &adapter
->flags
))
1431 /* allocate transmit descriptors */
1432 err
= e1000_setup_all_tx_resources(adapter
);
1436 /* allocate receive descriptors */
1437 err
= e1000_setup_all_rx_resources(adapter
);
1441 e1000_power_up_phy(adapter
);
1443 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
1444 if ((hw
->mng_cookie
.status
&
1445 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
)) {
1446 e1000_update_mng_vlan(adapter
);
1449 /* If AMT is enabled, let the firmware know that the network
1450 * interface is now open */
1451 if (hw
->mac_type
== e1000_82573
&&
1452 e1000_check_mng_mode(hw
))
1453 e1000_get_hw_control(adapter
);
1455 /* before we allocate an interrupt, we must be ready to handle it.
1456 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
1457 * as soon as we call pci_request_irq, so we have to setup our
1458 * clean_rx handler before we do so. */
1459 e1000_configure(adapter
);
1461 err
= e1000_request_irq(adapter
);
1465 /* From here on the code is the same as e1000_up() */
1466 clear_bit(__E1000_DOWN
, &adapter
->flags
);
1468 napi_enable(&adapter
->napi
);
1470 e1000_irq_enable(adapter
);
1472 netif_start_queue(netdev
);
1474 /* fire a link status change interrupt to start the watchdog */
1475 ew32(ICS
, E1000_ICS_LSC
);
1477 return E1000_SUCCESS
;
1480 e1000_release_hw_control(adapter
);
1481 e1000_power_down_phy(adapter
);
1482 e1000_free_all_rx_resources(adapter
);
1484 e1000_free_all_tx_resources(adapter
);
1486 e1000_reset(adapter
);
1492 * e1000_close - Disables a network interface
1493 * @netdev: network interface device structure
1495 * Returns 0, this is not allowed to fail
1497 * The close entry point is called when an interface is de-activated
1498 * by the OS. The hardware is still under the drivers control, but
1499 * needs to be disabled. A global MAC reset is issued to stop the
1500 * hardware, and all transmit and receive resources are freed.
1503 static int e1000_close(struct net_device
*netdev
)
1505 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1506 struct e1000_hw
*hw
= &adapter
->hw
;
1508 WARN_ON(test_bit(__E1000_RESETTING
, &adapter
->flags
));
1509 e1000_down(adapter
);
1510 e1000_power_down_phy(adapter
);
1511 e1000_free_irq(adapter
);
1513 e1000_free_all_tx_resources(adapter
);
1514 e1000_free_all_rx_resources(adapter
);
1516 /* kill manageability vlan ID if supported, but not if a vlan with
1517 * the same ID is registered on the host OS (let 8021q kill it) */
1518 if ((hw
->mng_cookie
.status
&
1519 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
1521 vlan_group_get_device(adapter
->vlgrp
, adapter
->mng_vlan_id
))) {
1522 e1000_vlan_rx_kill_vid(netdev
, adapter
->mng_vlan_id
);
1525 /* If AMT is enabled, let the firmware know that the network
1526 * interface is now closed */
1527 if (hw
->mac_type
== e1000_82573
&&
1528 e1000_check_mng_mode(hw
))
1529 e1000_release_hw_control(adapter
);
1535 * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1536 * @adapter: address of board private structure
1537 * @start: address of beginning of memory
1538 * @len: length of memory
1540 static bool e1000_check_64k_bound(struct e1000_adapter
*adapter
, void *start
,
1543 struct e1000_hw
*hw
= &adapter
->hw
;
1544 unsigned long begin
= (unsigned long)start
;
1545 unsigned long end
= begin
+ len
;
1547 /* First rev 82545 and 82546 need to not allow any memory
1548 * write location to cross 64k boundary due to errata 23 */
1549 if (hw
->mac_type
== e1000_82545
||
1550 hw
->mac_type
== e1000_82546
) {
1551 return ((begin
^ (end
- 1)) >> 16) != 0 ? false : true;
1558 * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1559 * @adapter: board private structure
1560 * @txdr: tx descriptor ring (for a specific queue) to setup
1562 * Return 0 on success, negative on failure
1565 static int e1000_setup_tx_resources(struct e1000_adapter
*adapter
,
1566 struct e1000_tx_ring
*txdr
)
1568 struct pci_dev
*pdev
= adapter
->pdev
;
1571 size
= sizeof(struct e1000_buffer
) * txdr
->count
;
1572 txdr
->buffer_info
= vmalloc(size
);
1573 if (!txdr
->buffer_info
) {
1575 "Unable to allocate memory for the transmit descriptor ring\n");
1578 memset(txdr
->buffer_info
, 0, size
);
1580 /* round up to nearest 4K */
1582 txdr
->size
= txdr
->count
* sizeof(struct e1000_tx_desc
);
1583 txdr
->size
= ALIGN(txdr
->size
, 4096);
1585 txdr
->desc
= pci_alloc_consistent(pdev
, txdr
->size
, &txdr
->dma
);
1588 vfree(txdr
->buffer_info
);
1590 "Unable to allocate memory for the transmit descriptor ring\n");
1594 /* Fix for errata 23, can't cross 64kB boundary */
1595 if (!e1000_check_64k_bound(adapter
, txdr
->desc
, txdr
->size
)) {
1596 void *olddesc
= txdr
->desc
;
1597 dma_addr_t olddma
= txdr
->dma
;
1598 DPRINTK(TX_ERR
, ERR
, "txdr align check failed: %u bytes "
1599 "at %p\n", txdr
->size
, txdr
->desc
);
1600 /* Try again, without freeing the previous */
1601 txdr
->desc
= pci_alloc_consistent(pdev
, txdr
->size
, &txdr
->dma
);
1602 /* Failed allocation, critical failure */
1604 pci_free_consistent(pdev
, txdr
->size
, olddesc
, olddma
);
1605 goto setup_tx_desc_die
;
1608 if (!e1000_check_64k_bound(adapter
, txdr
->desc
, txdr
->size
)) {
1610 pci_free_consistent(pdev
, txdr
->size
, txdr
->desc
,
1612 pci_free_consistent(pdev
, txdr
->size
, olddesc
, olddma
);
1614 "Unable to allocate aligned memory "
1615 "for the transmit descriptor ring\n");
1616 vfree(txdr
->buffer_info
);
1619 /* Free old allocation, new allocation was successful */
1620 pci_free_consistent(pdev
, txdr
->size
, olddesc
, olddma
);
1623 memset(txdr
->desc
, 0, txdr
->size
);
1625 txdr
->next_to_use
= 0;
1626 txdr
->next_to_clean
= 0;
1627 spin_lock_init(&txdr
->tx_lock
);
1633 * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1634 * (Descriptors) for all queues
1635 * @adapter: board private structure
1637 * Return 0 on success, negative on failure
1640 int e1000_setup_all_tx_resources(struct e1000_adapter
*adapter
)
1644 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
1645 err
= e1000_setup_tx_resources(adapter
, &adapter
->tx_ring
[i
]);
1648 "Allocation for Tx Queue %u failed\n", i
);
1649 for (i
-- ; i
>= 0; i
--)
1650 e1000_free_tx_resources(adapter
,
1651 &adapter
->tx_ring
[i
]);
1660 * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1661 * @adapter: board private structure
1663 * Configure the Tx unit of the MAC after a reset.
1666 static void e1000_configure_tx(struct e1000_adapter
*adapter
)
1669 struct e1000_hw
*hw
= &adapter
->hw
;
1670 u32 tdlen
, tctl
, tipg
, tarc
;
1673 /* Setup the HW Tx Head and Tail descriptor pointers */
1675 switch (adapter
->num_tx_queues
) {
1678 tdba
= adapter
->tx_ring
[0].dma
;
1679 tdlen
= adapter
->tx_ring
[0].count
*
1680 sizeof(struct e1000_tx_desc
);
1682 ew32(TDBAH
, (tdba
>> 32));
1683 ew32(TDBAL
, (tdba
& 0x00000000ffffffffULL
));
1686 adapter
->tx_ring
[0].tdh
= ((hw
->mac_type
>= e1000_82543
) ? E1000_TDH
: E1000_82542_TDH
);
1687 adapter
->tx_ring
[0].tdt
= ((hw
->mac_type
>= e1000_82543
) ? E1000_TDT
: E1000_82542_TDT
);
1691 /* Set the default values for the Tx Inter Packet Gap timer */
1692 if (hw
->mac_type
<= e1000_82547_rev_2
&&
1693 (hw
->media_type
== e1000_media_type_fiber
||
1694 hw
->media_type
== e1000_media_type_internal_serdes
))
1695 tipg
= DEFAULT_82543_TIPG_IPGT_FIBER
;
1697 tipg
= DEFAULT_82543_TIPG_IPGT_COPPER
;
1699 switch (hw
->mac_type
) {
1700 case e1000_82542_rev2_0
:
1701 case e1000_82542_rev2_1
:
1702 tipg
= DEFAULT_82542_TIPG_IPGT
;
1703 ipgr1
= DEFAULT_82542_TIPG_IPGR1
;
1704 ipgr2
= DEFAULT_82542_TIPG_IPGR2
;
1706 case e1000_80003es2lan
:
1707 ipgr1
= DEFAULT_82543_TIPG_IPGR1
;
1708 ipgr2
= DEFAULT_80003ES2LAN_TIPG_IPGR2
;
1711 ipgr1
= DEFAULT_82543_TIPG_IPGR1
;
1712 ipgr2
= DEFAULT_82543_TIPG_IPGR2
;
1715 tipg
|= ipgr1
<< E1000_TIPG_IPGR1_SHIFT
;
1716 tipg
|= ipgr2
<< E1000_TIPG_IPGR2_SHIFT
;
1719 /* Set the Tx Interrupt Delay register */
1721 ew32(TIDV
, adapter
->tx_int_delay
);
1722 if (hw
->mac_type
>= e1000_82540
)
1723 ew32(TADV
, adapter
->tx_abs_int_delay
);
1725 /* Program the Transmit Control Register */
1728 tctl
&= ~E1000_TCTL_CT
;
1729 tctl
|= E1000_TCTL_PSP
| E1000_TCTL_RTLC
|
1730 (E1000_COLLISION_THRESHOLD
<< E1000_CT_SHIFT
);
1732 if (hw
->mac_type
== e1000_82571
|| hw
->mac_type
== e1000_82572
) {
1734 /* set the speed mode bit, we'll clear it if we're not at
1735 * gigabit link later */
1738 } else if (hw
->mac_type
== e1000_80003es2lan
) {
1747 e1000_config_collision_dist(hw
);
1749 /* Setup Transmit Descriptor Settings for eop descriptor */
1750 adapter
->txd_cmd
= E1000_TXD_CMD_EOP
| E1000_TXD_CMD_IFCS
;
1752 /* only set IDE if we are delaying interrupts using the timers */
1753 if (adapter
->tx_int_delay
)
1754 adapter
->txd_cmd
|= E1000_TXD_CMD_IDE
;
1756 if (hw
->mac_type
< e1000_82543
)
1757 adapter
->txd_cmd
|= E1000_TXD_CMD_RPS
;
1759 adapter
->txd_cmd
|= E1000_TXD_CMD_RS
;
1761 /* Cache if we're 82544 running in PCI-X because we'll
1762 * need this to apply a workaround later in the send path. */
1763 if (hw
->mac_type
== e1000_82544
&&
1764 hw
->bus_type
== e1000_bus_type_pcix
)
1765 adapter
->pcix_82544
= 1;
1772 * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1773 * @adapter: board private structure
1774 * @rxdr: rx descriptor ring (for a specific queue) to setup
1776 * Returns 0 on success, negative on failure
1779 static int e1000_setup_rx_resources(struct e1000_adapter
*adapter
,
1780 struct e1000_rx_ring
*rxdr
)
1782 struct e1000_hw
*hw
= &adapter
->hw
;
1783 struct pci_dev
*pdev
= adapter
->pdev
;
1786 size
= sizeof(struct e1000_buffer
) * rxdr
->count
;
1787 rxdr
->buffer_info
= vmalloc(size
);
1788 if (!rxdr
->buffer_info
) {
1790 "Unable to allocate memory for the receive descriptor ring\n");
1793 memset(rxdr
->buffer_info
, 0, size
);
1795 if (hw
->mac_type
<= e1000_82547_rev_2
)
1796 desc_len
= sizeof(struct e1000_rx_desc
);
1798 desc_len
= sizeof(union e1000_rx_desc_packet_split
);
1800 /* Round up to nearest 4K */
1802 rxdr
->size
= rxdr
->count
* desc_len
;
1803 rxdr
->size
= ALIGN(rxdr
->size
, 4096);
1805 rxdr
->desc
= pci_alloc_consistent(pdev
, rxdr
->size
, &rxdr
->dma
);
1809 "Unable to allocate memory for the receive descriptor ring\n");
1811 vfree(rxdr
->buffer_info
);
1815 /* Fix for errata 23, can't cross 64kB boundary */
1816 if (!e1000_check_64k_bound(adapter
, rxdr
->desc
, rxdr
->size
)) {
1817 void *olddesc
= rxdr
->desc
;
1818 dma_addr_t olddma
= rxdr
->dma
;
1819 DPRINTK(RX_ERR
, ERR
, "rxdr align check failed: %u bytes "
1820 "at %p\n", rxdr
->size
, rxdr
->desc
);
1821 /* Try again, without freeing the previous */
1822 rxdr
->desc
= pci_alloc_consistent(pdev
, rxdr
->size
, &rxdr
->dma
);
1823 /* Failed allocation, critical failure */
1825 pci_free_consistent(pdev
, rxdr
->size
, olddesc
, olddma
);
1827 "Unable to allocate memory "
1828 "for the receive descriptor ring\n");
1829 goto setup_rx_desc_die
;
1832 if (!e1000_check_64k_bound(adapter
, rxdr
->desc
, rxdr
->size
)) {
1834 pci_free_consistent(pdev
, rxdr
->size
, rxdr
->desc
,
1836 pci_free_consistent(pdev
, rxdr
->size
, olddesc
, olddma
);
1838 "Unable to allocate aligned memory "
1839 "for the receive descriptor ring\n");
1840 goto setup_rx_desc_die
;
1842 /* Free old allocation, new allocation was successful */
1843 pci_free_consistent(pdev
, rxdr
->size
, olddesc
, olddma
);
1846 memset(rxdr
->desc
, 0, rxdr
->size
);
1848 rxdr
->next_to_clean
= 0;
1849 rxdr
->next_to_use
= 0;
1855 * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1856 * (Descriptors) for all queues
1857 * @adapter: board private structure
1859 * Return 0 on success, negative on failure
1862 int e1000_setup_all_rx_resources(struct e1000_adapter
*adapter
)
1866 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1867 err
= e1000_setup_rx_resources(adapter
, &adapter
->rx_ring
[i
]);
1870 "Allocation for Rx Queue %u failed\n", i
);
1871 for (i
-- ; i
>= 0; i
--)
1872 e1000_free_rx_resources(adapter
,
1873 &adapter
->rx_ring
[i
]);
1882 * e1000_setup_rctl - configure the receive control registers
1883 * @adapter: Board private structure
1885 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
1886 (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
1887 static void e1000_setup_rctl(struct e1000_adapter
*adapter
)
1889 struct e1000_hw
*hw
= &adapter
->hw
;
1894 rctl
&= ~(3 << E1000_RCTL_MO_SHIFT
);
1896 rctl
|= E1000_RCTL_EN
| E1000_RCTL_BAM
|
1897 E1000_RCTL_LBM_NO
| E1000_RCTL_RDMTS_HALF
|
1898 (hw
->mc_filter_type
<< E1000_RCTL_MO_SHIFT
);
1900 if (hw
->tbi_compatibility_on
== 1)
1901 rctl
|= E1000_RCTL_SBP
;
1903 rctl
&= ~E1000_RCTL_SBP
;
1905 if (adapter
->netdev
->mtu
<= ETH_DATA_LEN
)
1906 rctl
&= ~E1000_RCTL_LPE
;
1908 rctl
|= E1000_RCTL_LPE
;
1910 /* Setup buffer sizes */
1911 rctl
&= ~E1000_RCTL_SZ_4096
;
1912 rctl
|= E1000_RCTL_BSEX
;
1913 switch (adapter
->rx_buffer_len
) {
1914 case E1000_RXBUFFER_256
:
1915 rctl
|= E1000_RCTL_SZ_256
;
1916 rctl
&= ~E1000_RCTL_BSEX
;
1918 case E1000_RXBUFFER_512
:
1919 rctl
|= E1000_RCTL_SZ_512
;
1920 rctl
&= ~E1000_RCTL_BSEX
;
1922 case E1000_RXBUFFER_1024
:
1923 rctl
|= E1000_RCTL_SZ_1024
;
1924 rctl
&= ~E1000_RCTL_BSEX
;
1926 case E1000_RXBUFFER_2048
:
1928 rctl
|= E1000_RCTL_SZ_2048
;
1929 rctl
&= ~E1000_RCTL_BSEX
;
1931 case E1000_RXBUFFER_4096
:
1932 rctl
|= E1000_RCTL_SZ_4096
;
1934 case E1000_RXBUFFER_8192
:
1935 rctl
|= E1000_RCTL_SZ_8192
;
1937 case E1000_RXBUFFER_16384
:
1938 rctl
|= E1000_RCTL_SZ_16384
;
1946 * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1947 * @adapter: board private structure
1949 * Configure the Rx unit of the MAC after a reset.
1952 static void e1000_configure_rx(struct e1000_adapter
*adapter
)
1955 struct e1000_hw
*hw
= &adapter
->hw
;
1956 u32 rdlen
, rctl
, rxcsum
, ctrl_ext
;
1958 rdlen
= adapter
->rx_ring
[0].count
*
1959 sizeof(struct e1000_rx_desc
);
1960 adapter
->clean_rx
= e1000_clean_rx_irq
;
1961 adapter
->alloc_rx_buf
= e1000_alloc_rx_buffers
;
1963 /* disable receives while setting up the descriptors */
1965 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
1967 /* set the Receive Delay Timer Register */
1968 ew32(RDTR
, adapter
->rx_int_delay
);
1970 if (hw
->mac_type
>= e1000_82540
) {
1971 ew32(RADV
, adapter
->rx_abs_int_delay
);
1972 if (adapter
->itr_setting
!= 0)
1973 ew32(ITR
, 1000000000 / (adapter
->itr
* 256));
1976 if (hw
->mac_type
>= e1000_82571
) {
1977 ctrl_ext
= er32(CTRL_EXT
);
1978 /* Reset delay timers after every interrupt */
1979 ctrl_ext
|= E1000_CTRL_EXT_INT_TIMER_CLR
;
1980 /* Auto-Mask interrupts upon ICR access */
1981 ctrl_ext
|= E1000_CTRL_EXT_IAME
;
1982 ew32(IAM
, 0xffffffff);
1983 ew32(CTRL_EXT
, ctrl_ext
);
1984 E1000_WRITE_FLUSH();
1987 /* Setup the HW Rx Head and Tail Descriptor Pointers and
1988 * the Base and Length of the Rx Descriptor Ring */
1989 switch (adapter
->num_rx_queues
) {
1992 rdba
= adapter
->rx_ring
[0].dma
;
1994 ew32(RDBAH
, (rdba
>> 32));
1995 ew32(RDBAL
, (rdba
& 0x00000000ffffffffULL
));
1998 adapter
->rx_ring
[0].rdh
= ((hw
->mac_type
>= e1000_82543
) ? E1000_RDH
: E1000_82542_RDH
);
1999 adapter
->rx_ring
[0].rdt
= ((hw
->mac_type
>= e1000_82543
) ? E1000_RDT
: E1000_82542_RDT
);
2003 /* Enable 82543 Receive Checksum Offload for TCP and UDP */
2004 if (hw
->mac_type
>= e1000_82543
) {
2005 rxcsum
= er32(RXCSUM
);
2006 if (adapter
->rx_csum
)
2007 rxcsum
|= E1000_RXCSUM_TUOFL
;
2009 /* don't need to clear IPPCSE as it defaults to 0 */
2010 rxcsum
&= ~E1000_RXCSUM_TUOFL
;
2011 ew32(RXCSUM
, rxcsum
);
2014 /* Enable Receives */
2019 * e1000_free_tx_resources - Free Tx Resources per Queue
2020 * @adapter: board private structure
2021 * @tx_ring: Tx descriptor ring for a specific queue
2023 * Free all transmit software resources
2026 static void e1000_free_tx_resources(struct e1000_adapter
*adapter
,
2027 struct e1000_tx_ring
*tx_ring
)
2029 struct pci_dev
*pdev
= adapter
->pdev
;
2031 e1000_clean_tx_ring(adapter
, tx_ring
);
2033 vfree(tx_ring
->buffer_info
);
2034 tx_ring
->buffer_info
= NULL
;
2036 pci_free_consistent(pdev
, tx_ring
->size
, tx_ring
->desc
, tx_ring
->dma
);
2038 tx_ring
->desc
= NULL
;
2042 * e1000_free_all_tx_resources - Free Tx Resources for All Queues
2043 * @adapter: board private structure
2045 * Free all transmit software resources
2048 void e1000_free_all_tx_resources(struct e1000_adapter
*adapter
)
2052 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
2053 e1000_free_tx_resources(adapter
, &adapter
->tx_ring
[i
]);
2056 static void e1000_unmap_and_free_tx_resource(struct e1000_adapter
*adapter
,
2057 struct e1000_buffer
*buffer_info
)
2059 if (buffer_info
->dma
) {
2060 pci_unmap_page(adapter
->pdev
,
2062 buffer_info
->length
,
2064 buffer_info
->dma
= 0;
2066 if (buffer_info
->skb
) {
2067 dev_kfree_skb_any(buffer_info
->skb
);
2068 buffer_info
->skb
= NULL
;
2070 /* buffer_info must be completely set up in the transmit path */
2074 * e1000_clean_tx_ring - Free Tx Buffers
2075 * @adapter: board private structure
2076 * @tx_ring: ring to be cleaned
2079 static void e1000_clean_tx_ring(struct e1000_adapter
*adapter
,
2080 struct e1000_tx_ring
*tx_ring
)
2082 struct e1000_hw
*hw
= &adapter
->hw
;
2083 struct e1000_buffer
*buffer_info
;
2087 /* Free all the Tx ring sk_buffs */
2089 for (i
= 0; i
< tx_ring
->count
; i
++) {
2090 buffer_info
= &tx_ring
->buffer_info
[i
];
2091 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
2094 size
= sizeof(struct e1000_buffer
) * tx_ring
->count
;
2095 memset(tx_ring
->buffer_info
, 0, size
);
2097 /* Zero out the descriptor ring */
2099 memset(tx_ring
->desc
, 0, tx_ring
->size
);
2101 tx_ring
->next_to_use
= 0;
2102 tx_ring
->next_to_clean
= 0;
2103 tx_ring
->last_tx_tso
= 0;
2105 writel(0, hw
->hw_addr
+ tx_ring
->tdh
);
2106 writel(0, hw
->hw_addr
+ tx_ring
->tdt
);
2110 * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
2111 * @adapter: board private structure
2114 static void e1000_clean_all_tx_rings(struct e1000_adapter
*adapter
)
2118 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
2119 e1000_clean_tx_ring(adapter
, &adapter
->tx_ring
[i
]);
2123 * e1000_free_rx_resources - Free Rx Resources
2124 * @adapter: board private structure
2125 * @rx_ring: ring to clean the resources from
2127 * Free all receive software resources
2130 static void e1000_free_rx_resources(struct e1000_adapter
*adapter
,
2131 struct e1000_rx_ring
*rx_ring
)
2133 struct pci_dev
*pdev
= adapter
->pdev
;
2135 e1000_clean_rx_ring(adapter
, rx_ring
);
2137 vfree(rx_ring
->buffer_info
);
2138 rx_ring
->buffer_info
= NULL
;
2140 pci_free_consistent(pdev
, rx_ring
->size
, rx_ring
->desc
, rx_ring
->dma
);
2142 rx_ring
->desc
= NULL
;
2146 * e1000_free_all_rx_resources - Free Rx Resources for All Queues
2147 * @adapter: board private structure
2149 * Free all receive software resources
2152 void e1000_free_all_rx_resources(struct e1000_adapter
*adapter
)
2156 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2157 e1000_free_rx_resources(adapter
, &adapter
->rx_ring
[i
]);
2161 * e1000_clean_rx_ring - Free Rx Buffers per Queue
2162 * @adapter: board private structure
2163 * @rx_ring: ring to free buffers from
2166 static void e1000_clean_rx_ring(struct e1000_adapter
*adapter
,
2167 struct e1000_rx_ring
*rx_ring
)
2169 struct e1000_hw
*hw
= &adapter
->hw
;
2170 struct e1000_buffer
*buffer_info
;
2171 struct pci_dev
*pdev
= adapter
->pdev
;
2175 /* Free all the Rx ring sk_buffs */
2176 for (i
= 0; i
< rx_ring
->count
; i
++) {
2177 buffer_info
= &rx_ring
->buffer_info
[i
];
2178 if (buffer_info
->skb
) {
2179 pci_unmap_single(pdev
,
2181 buffer_info
->length
,
2182 PCI_DMA_FROMDEVICE
);
2184 dev_kfree_skb(buffer_info
->skb
);
2185 buffer_info
->skb
= NULL
;
2189 size
= sizeof(struct e1000_buffer
) * rx_ring
->count
;
2190 memset(rx_ring
->buffer_info
, 0, size
);
2192 /* Zero out the descriptor ring */
2194 memset(rx_ring
->desc
, 0, rx_ring
->size
);
2196 rx_ring
->next_to_clean
= 0;
2197 rx_ring
->next_to_use
= 0;
2199 writel(0, hw
->hw_addr
+ rx_ring
->rdh
);
2200 writel(0, hw
->hw_addr
+ rx_ring
->rdt
);
2204 * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2205 * @adapter: board private structure
2208 static void e1000_clean_all_rx_rings(struct e1000_adapter
*adapter
)
2212 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2213 e1000_clean_rx_ring(adapter
, &adapter
->rx_ring
[i
]);
2216 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2217 * and memory write and invalidate disabled for certain operations
2219 static void e1000_enter_82542_rst(struct e1000_adapter
*adapter
)
2221 struct e1000_hw
*hw
= &adapter
->hw
;
2222 struct net_device
*netdev
= adapter
->netdev
;
2225 e1000_pci_clear_mwi(hw
);
2228 rctl
|= E1000_RCTL_RST
;
2230 E1000_WRITE_FLUSH();
2233 if (netif_running(netdev
))
2234 e1000_clean_all_rx_rings(adapter
);
2237 static void e1000_leave_82542_rst(struct e1000_adapter
*adapter
)
2239 struct e1000_hw
*hw
= &adapter
->hw
;
2240 struct net_device
*netdev
= adapter
->netdev
;
2244 rctl
&= ~E1000_RCTL_RST
;
2246 E1000_WRITE_FLUSH();
2249 if (hw
->pci_cmd_word
& PCI_COMMAND_INVALIDATE
)
2250 e1000_pci_set_mwi(hw
);
2252 if (netif_running(netdev
)) {
2253 /* No need to loop, because 82542 supports only 1 queue */
2254 struct e1000_rx_ring
*ring
= &adapter
->rx_ring
[0];
2255 e1000_configure_rx(adapter
);
2256 adapter
->alloc_rx_buf(adapter
, ring
, E1000_DESC_UNUSED(ring
));
2261 * e1000_set_mac - Change the Ethernet Address of the NIC
2262 * @netdev: network interface device structure
2263 * @p: pointer to an address structure
2265 * Returns 0 on success, negative on failure
2268 static int e1000_set_mac(struct net_device
*netdev
, void *p
)
2270 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2271 struct e1000_hw
*hw
= &adapter
->hw
;
2272 struct sockaddr
*addr
= p
;
2274 if (!is_valid_ether_addr(addr
->sa_data
))
2275 return -EADDRNOTAVAIL
;
2277 /* 82542 2.0 needs to be in reset to write receive address registers */
2279 if (hw
->mac_type
== e1000_82542_rev2_0
)
2280 e1000_enter_82542_rst(adapter
);
2282 memcpy(netdev
->dev_addr
, addr
->sa_data
, netdev
->addr_len
);
2283 memcpy(hw
->mac_addr
, addr
->sa_data
, netdev
->addr_len
);
2285 e1000_rar_set(hw
, hw
->mac_addr
, 0);
2287 /* With 82571 controllers, LAA may be overwritten (with the default)
2288 * due to controller reset from the other port. */
2289 if (hw
->mac_type
== e1000_82571
) {
2290 /* activate the work around */
2291 hw
->laa_is_present
= 1;
2293 /* Hold a copy of the LAA in RAR[14] This is done so that
2294 * between the time RAR[0] gets clobbered and the time it
2295 * gets fixed (in e1000_watchdog), the actual LAA is in one
2296 * of the RARs and no incoming packets directed to this port
2297 * are dropped. Eventaully the LAA will be in RAR[0] and
2299 e1000_rar_set(hw
, hw
->mac_addr
,
2300 E1000_RAR_ENTRIES
- 1);
2303 if (hw
->mac_type
== e1000_82542_rev2_0
)
2304 e1000_leave_82542_rst(adapter
);
2310 * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
2311 * @netdev: network interface device structure
2313 * The set_rx_mode entry point is called whenever the unicast or multicast
2314 * address lists or the network interface flags are updated. This routine is
2315 * responsible for configuring the hardware for proper unicast, multicast,
2316 * promiscuous mode, and all-multi behavior.
2319 static void e1000_set_rx_mode(struct net_device
*netdev
)
2321 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2322 struct e1000_hw
*hw
= &adapter
->hw
;
2323 struct dev_addr_list
*uc_ptr
;
2324 struct dev_addr_list
*mc_ptr
;
2327 int i
, rar_entries
= E1000_RAR_ENTRIES
;
2328 int mta_reg_count
= (hw
->mac_type
== e1000_ich8lan
) ?
2329 E1000_NUM_MTA_REGISTERS_ICH8LAN
:
2330 E1000_NUM_MTA_REGISTERS
;
2332 if (hw
->mac_type
== e1000_ich8lan
)
2333 rar_entries
= E1000_RAR_ENTRIES_ICH8LAN
;
2335 /* reserve RAR[14] for LAA over-write work-around */
2336 if (hw
->mac_type
== e1000_82571
)
2339 /* Check for Promiscuous and All Multicast modes */
2343 if (netdev
->flags
& IFF_PROMISC
) {
2344 rctl
|= (E1000_RCTL_UPE
| E1000_RCTL_MPE
);
2345 rctl
&= ~E1000_RCTL_VFE
;
2347 if (netdev
->flags
& IFF_ALLMULTI
) {
2348 rctl
|= E1000_RCTL_MPE
;
2350 rctl
&= ~E1000_RCTL_MPE
;
2352 if (adapter
->hw
.mac_type
!= e1000_ich8lan
)
2353 rctl
|= E1000_RCTL_VFE
;
2357 if (netdev
->uc_count
> rar_entries
- 1) {
2358 rctl
|= E1000_RCTL_UPE
;
2359 } else if (!(netdev
->flags
& IFF_PROMISC
)) {
2360 rctl
&= ~E1000_RCTL_UPE
;
2361 uc_ptr
= netdev
->uc_list
;
2366 /* 82542 2.0 needs to be in reset to write receive address registers */
2368 if (hw
->mac_type
== e1000_82542_rev2_0
)
2369 e1000_enter_82542_rst(adapter
);
2371 /* load the first 14 addresses into the exact filters 1-14. Unicast
2372 * addresses take precedence to avoid disabling unicast filtering
2375 * RAR 0 is used for the station MAC adddress
2376 * if there are not 14 addresses, go ahead and clear the filters
2377 * -- with 82571 controllers only 0-13 entries are filled here
2379 mc_ptr
= netdev
->mc_list
;
2381 for (i
= 1; i
< rar_entries
; i
++) {
2383 e1000_rar_set(hw
, uc_ptr
->da_addr
, i
);
2384 uc_ptr
= uc_ptr
->next
;
2385 } else if (mc_ptr
) {
2386 e1000_rar_set(hw
, mc_ptr
->da_addr
, i
);
2387 mc_ptr
= mc_ptr
->next
;
2389 E1000_WRITE_REG_ARRAY(hw
, RA
, i
<< 1, 0);
2390 E1000_WRITE_FLUSH();
2391 E1000_WRITE_REG_ARRAY(hw
, RA
, (i
<< 1) + 1, 0);
2392 E1000_WRITE_FLUSH();
2395 WARN_ON(uc_ptr
!= NULL
);
2397 /* clear the old settings from the multicast hash table */
2399 for (i
= 0; i
< mta_reg_count
; i
++) {
2400 E1000_WRITE_REG_ARRAY(hw
, MTA
, i
, 0);
2401 E1000_WRITE_FLUSH();
2404 /* load any remaining addresses into the hash table */
2406 for (; mc_ptr
; mc_ptr
= mc_ptr
->next
) {
2407 hash_value
= e1000_hash_mc_addr(hw
, mc_ptr
->da_addr
);
2408 e1000_mta_set(hw
, hash_value
);
2411 if (hw
->mac_type
== e1000_82542_rev2_0
)
2412 e1000_leave_82542_rst(adapter
);
2415 /* Need to wait a few seconds after link up to get diagnostic information from
2418 static void e1000_update_phy_info(unsigned long data
)
2420 struct e1000_adapter
*adapter
= (struct e1000_adapter
*)data
;
2421 struct e1000_hw
*hw
= &adapter
->hw
;
2422 e1000_phy_get_info(hw
, &adapter
->phy_info
);
2426 * e1000_82547_tx_fifo_stall - Timer Call-back
2427 * @data: pointer to adapter cast into an unsigned long
2430 static void e1000_82547_tx_fifo_stall(unsigned long data
)
2432 struct e1000_adapter
*adapter
= (struct e1000_adapter
*)data
;
2433 struct e1000_hw
*hw
= &adapter
->hw
;
2434 struct net_device
*netdev
= adapter
->netdev
;
2437 if (atomic_read(&adapter
->tx_fifo_stall
)) {
2438 if ((er32(TDT
) == er32(TDH
)) &&
2439 (er32(TDFT
) == er32(TDFH
)) &&
2440 (er32(TDFTS
) == er32(TDFHS
))) {
2442 ew32(TCTL
, tctl
& ~E1000_TCTL_EN
);
2443 ew32(TDFT
, adapter
->tx_head_addr
);
2444 ew32(TDFH
, adapter
->tx_head_addr
);
2445 ew32(TDFTS
, adapter
->tx_head_addr
);
2446 ew32(TDFHS
, adapter
->tx_head_addr
);
2448 E1000_WRITE_FLUSH();
2450 adapter
->tx_fifo_head
= 0;
2451 atomic_set(&adapter
->tx_fifo_stall
, 0);
2452 netif_wake_queue(netdev
);
2454 mod_timer(&adapter
->tx_fifo_stall_timer
, jiffies
+ 1);
2460 * e1000_watchdog - Timer Call-back
2461 * @data: pointer to adapter cast into an unsigned long
2463 static void e1000_watchdog(unsigned long data
)
2465 struct e1000_adapter
*adapter
= (struct e1000_adapter
*)data
;
2466 struct e1000_hw
*hw
= &adapter
->hw
;
2467 struct net_device
*netdev
= adapter
->netdev
;
2468 struct e1000_tx_ring
*txdr
= adapter
->tx_ring
;
2472 ret_val
= e1000_check_for_link(hw
);
2473 if ((ret_val
== E1000_ERR_PHY
) &&
2474 (hw
->phy_type
== e1000_phy_igp_3
) &&
2475 (er32(CTRL
) & E1000_PHY_CTRL_GBE_DISABLE
)) {
2476 /* See e1000_kumeran_lock_loss_workaround() */
2478 "Gigabit has been disabled, downgrading speed\n");
2481 if (hw
->mac_type
== e1000_82573
) {
2482 e1000_enable_tx_pkt_filtering(hw
);
2483 if (adapter
->mng_vlan_id
!= hw
->mng_cookie
.vlan_id
)
2484 e1000_update_mng_vlan(adapter
);
2487 if ((hw
->media_type
== e1000_media_type_internal_serdes
) &&
2488 !(er32(TXCW
) & E1000_TXCW_ANE
))
2489 link
= !hw
->serdes_link_down
;
2491 link
= er32(STATUS
) & E1000_STATUS_LU
;
2494 if (!netif_carrier_ok(netdev
)) {
2497 e1000_get_speed_and_duplex(hw
,
2498 &adapter
->link_speed
,
2499 &adapter
->link_duplex
);
2502 printk(KERN_INFO
"e1000: %s NIC Link is Up %d Mbps %s, "
2503 "Flow Control: %s\n",
2505 adapter
->link_speed
,
2506 adapter
->link_duplex
== FULL_DUPLEX
?
2507 "Full Duplex" : "Half Duplex",
2508 ((ctrl
& E1000_CTRL_TFCE
) && (ctrl
&
2509 E1000_CTRL_RFCE
)) ? "RX/TX" : ((ctrl
&
2510 E1000_CTRL_RFCE
) ? "RX" : ((ctrl
&
2511 E1000_CTRL_TFCE
) ? "TX" : "None" )));
2513 /* tweak tx_queue_len according to speed/duplex
2514 * and adjust the timeout factor */
2515 netdev
->tx_queue_len
= adapter
->tx_queue_len
;
2516 adapter
->tx_timeout_factor
= 1;
2517 switch (adapter
->link_speed
) {
2520 netdev
->tx_queue_len
= 10;
2521 adapter
->tx_timeout_factor
= 8;
2525 netdev
->tx_queue_len
= 100;
2526 /* maybe add some timeout factor ? */
2530 if ((hw
->mac_type
== e1000_82571
||
2531 hw
->mac_type
== e1000_82572
) &&
2534 tarc0
= er32(TARC0
);
2535 tarc0
&= ~(1 << 21);
2539 /* disable TSO for pcie and 10/100 speeds, to avoid
2540 * some hardware issues */
2541 if (!adapter
->tso_force
&&
2542 hw
->bus_type
== e1000_bus_type_pci_express
){
2543 switch (adapter
->link_speed
) {
2547 "10/100 speed: disabling TSO\n");
2548 netdev
->features
&= ~NETIF_F_TSO
;
2549 netdev
->features
&= ~NETIF_F_TSO6
;
2552 netdev
->features
|= NETIF_F_TSO
;
2553 netdev
->features
|= NETIF_F_TSO6
;
2561 /* enable transmits in the hardware, need to do this
2562 * after setting TARC0 */
2564 tctl
|= E1000_TCTL_EN
;
2567 netif_carrier_on(netdev
);
2568 netif_wake_queue(netdev
);
2569 mod_timer(&adapter
->phy_info_timer
, round_jiffies(jiffies
+ 2 * HZ
));
2570 adapter
->smartspeed
= 0;
2572 /* make sure the receive unit is started */
2573 if (hw
->rx_needs_kicking
) {
2574 u32 rctl
= er32(RCTL
);
2575 ew32(RCTL
, rctl
| E1000_RCTL_EN
);
2579 if (netif_carrier_ok(netdev
)) {
2580 adapter
->link_speed
= 0;
2581 adapter
->link_duplex
= 0;
2582 printk(KERN_INFO
"e1000: %s NIC Link is Down\n",
2584 netif_carrier_off(netdev
);
2585 netif_stop_queue(netdev
);
2586 mod_timer(&adapter
->phy_info_timer
, round_jiffies(jiffies
+ 2 * HZ
));
2588 /* 80003ES2LAN workaround--
2589 * For packet buffer work-around on link down event;
2590 * disable receives in the ISR and
2591 * reset device here in the watchdog
2593 if (hw
->mac_type
== e1000_80003es2lan
)
2595 schedule_work(&adapter
->reset_task
);
2598 e1000_smartspeed(adapter
);
2601 e1000_update_stats(adapter
);
2603 hw
->tx_packet_delta
= adapter
->stats
.tpt
- adapter
->tpt_old
;
2604 adapter
->tpt_old
= adapter
->stats
.tpt
;
2605 hw
->collision_delta
= adapter
->stats
.colc
- adapter
->colc_old
;
2606 adapter
->colc_old
= adapter
->stats
.colc
;
2608 adapter
->gorcl
= adapter
->stats
.gorcl
- adapter
->gorcl_old
;
2609 adapter
->gorcl_old
= adapter
->stats
.gorcl
;
2610 adapter
->gotcl
= adapter
->stats
.gotcl
- adapter
->gotcl_old
;
2611 adapter
->gotcl_old
= adapter
->stats
.gotcl
;
2613 e1000_update_adaptive(hw
);
2615 if (!netif_carrier_ok(netdev
)) {
2616 if (E1000_DESC_UNUSED(txdr
) + 1 < txdr
->count
) {
2617 /* We've lost link, so the controller stops DMA,
2618 * but we've got queued Tx work that's never going
2619 * to get done, so reset controller to flush Tx.
2620 * (Do the reset outside of interrupt context). */
2621 adapter
->tx_timeout_count
++;
2622 schedule_work(&adapter
->reset_task
);
2626 /* Cause software interrupt to ensure rx ring is cleaned */
2627 ew32(ICS
, E1000_ICS_RXDMT0
);
2629 /* Force detection of hung controller every watchdog period */
2630 adapter
->detect_tx_hung
= true;
2632 /* With 82571 controllers, LAA may be overwritten due to controller
2633 * reset from the other port. Set the appropriate LAA in RAR[0] */
2634 if (hw
->mac_type
== e1000_82571
&& hw
->laa_is_present
)
2635 e1000_rar_set(hw
, hw
->mac_addr
, 0);
2637 /* Reset the timer */
2638 mod_timer(&adapter
->watchdog_timer
, round_jiffies(jiffies
+ 2 * HZ
));
2641 enum latency_range
{
2645 latency_invalid
= 255
2649 * e1000_update_itr - update the dynamic ITR value based on statistics
2650 * Stores a new ITR value based on packets and byte
2651 * counts during the last interrupt. The advantage of per interrupt
2652 * computation is faster updates and more accurate ITR for the current
2653 * traffic pattern. Constants in this function were computed
2654 * based on theoretical maximum wire speed and thresholds were set based
2655 * on testing data as well as attempting to minimize response time
2656 * while increasing bulk throughput.
2657 * this functionality is controlled by the InterruptThrottleRate module
2658 * parameter (see e1000_param.c)
2659 * @adapter: pointer to adapter
2660 * @itr_setting: current adapter->itr
2661 * @packets: the number of packets during this measurement interval
2662 * @bytes: the number of bytes during this measurement interval
2664 static unsigned int e1000_update_itr(struct e1000_adapter
*adapter
,
2665 u16 itr_setting
, int packets
, int bytes
)
2667 unsigned int retval
= itr_setting
;
2668 struct e1000_hw
*hw
= &adapter
->hw
;
2670 if (unlikely(hw
->mac_type
< e1000_82540
))
2671 goto update_itr_done
;
2674 goto update_itr_done
;
2676 switch (itr_setting
) {
2677 case lowest_latency
:
2678 /* jumbo frames get bulk treatment*/
2679 if (bytes
/packets
> 8000)
2680 retval
= bulk_latency
;
2681 else if ((packets
< 5) && (bytes
> 512))
2682 retval
= low_latency
;
2684 case low_latency
: /* 50 usec aka 20000 ints/s */
2685 if (bytes
> 10000) {
2686 /* jumbo frames need bulk latency setting */
2687 if (bytes
/packets
> 8000)
2688 retval
= bulk_latency
;
2689 else if ((packets
< 10) || ((bytes
/packets
) > 1200))
2690 retval
= bulk_latency
;
2691 else if ((packets
> 35))
2692 retval
= lowest_latency
;
2693 } else if (bytes
/packets
> 2000)
2694 retval
= bulk_latency
;
2695 else if (packets
<= 2 && bytes
< 512)
2696 retval
= lowest_latency
;
2698 case bulk_latency
: /* 250 usec aka 4000 ints/s */
2699 if (bytes
> 25000) {
2701 retval
= low_latency
;
2702 } else if (bytes
< 6000) {
2703 retval
= low_latency
;
2712 static void e1000_set_itr(struct e1000_adapter
*adapter
)
2714 struct e1000_hw
*hw
= &adapter
->hw
;
2716 u32 new_itr
= adapter
->itr
;
2718 if (unlikely(hw
->mac_type
< e1000_82540
))
2721 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2722 if (unlikely(adapter
->link_speed
!= SPEED_1000
)) {
2728 adapter
->tx_itr
= e1000_update_itr(adapter
,
2730 adapter
->total_tx_packets
,
2731 adapter
->total_tx_bytes
);
2732 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2733 if (adapter
->itr_setting
== 3 && adapter
->tx_itr
== lowest_latency
)
2734 adapter
->tx_itr
= low_latency
;
2736 adapter
->rx_itr
= e1000_update_itr(adapter
,
2738 adapter
->total_rx_packets
,
2739 adapter
->total_rx_bytes
);
2740 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2741 if (adapter
->itr_setting
== 3 && adapter
->rx_itr
== lowest_latency
)
2742 adapter
->rx_itr
= low_latency
;
2744 current_itr
= max(adapter
->rx_itr
, adapter
->tx_itr
);
2746 switch (current_itr
) {
2747 /* counts and packets in update_itr are dependent on these numbers */
2748 case lowest_latency
:
2752 new_itr
= 20000; /* aka hwitr = ~200 */
2762 if (new_itr
!= adapter
->itr
) {
2763 /* this attempts to bias the interrupt rate towards Bulk
2764 * by adding intermediate steps when interrupt rate is
2766 new_itr
= new_itr
> adapter
->itr
?
2767 min(adapter
->itr
+ (new_itr
>> 2), new_itr
) :
2769 adapter
->itr
= new_itr
;
2770 ew32(ITR
, 1000000000 / (new_itr
* 256));
2776 #define E1000_TX_FLAGS_CSUM 0x00000001
2777 #define E1000_TX_FLAGS_VLAN 0x00000002
2778 #define E1000_TX_FLAGS_TSO 0x00000004
2779 #define E1000_TX_FLAGS_IPV4 0x00000008
2780 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
2781 #define E1000_TX_FLAGS_VLAN_SHIFT 16
2783 static int e1000_tso(struct e1000_adapter
*adapter
,
2784 struct e1000_tx_ring
*tx_ring
, struct sk_buff
*skb
)
2786 struct e1000_context_desc
*context_desc
;
2787 struct e1000_buffer
*buffer_info
;
2790 u16 ipcse
= 0, tucse
, mss
;
2791 u8 ipcss
, ipcso
, tucss
, tucso
, hdr_len
;
2794 if (skb_is_gso(skb
)) {
2795 if (skb_header_cloned(skb
)) {
2796 err
= pskb_expand_head(skb
, 0, 0, GFP_ATOMIC
);
2801 hdr_len
= skb_transport_offset(skb
) + tcp_hdrlen(skb
);
2802 mss
= skb_shinfo(skb
)->gso_size
;
2803 if (skb
->protocol
== htons(ETH_P_IP
)) {
2804 struct iphdr
*iph
= ip_hdr(skb
);
2807 tcp_hdr(skb
)->check
= ~csum_tcpudp_magic(iph
->saddr
,
2811 cmd_length
= E1000_TXD_CMD_IP
;
2812 ipcse
= skb_transport_offset(skb
) - 1;
2813 } else if (skb
->protocol
== htons(ETH_P_IPV6
)) {
2814 ipv6_hdr(skb
)->payload_len
= 0;
2815 tcp_hdr(skb
)->check
=
2816 ~csum_ipv6_magic(&ipv6_hdr(skb
)->saddr
,
2817 &ipv6_hdr(skb
)->daddr
,
2821 ipcss
= skb_network_offset(skb
);
2822 ipcso
= (void *)&(ip_hdr(skb
)->check
) - (void *)skb
->data
;
2823 tucss
= skb_transport_offset(skb
);
2824 tucso
= (void *)&(tcp_hdr(skb
)->check
) - (void *)skb
->data
;
2827 cmd_length
|= (E1000_TXD_CMD_DEXT
| E1000_TXD_CMD_TSE
|
2828 E1000_TXD_CMD_TCP
| (skb
->len
- (hdr_len
)));
2830 i
= tx_ring
->next_to_use
;
2831 context_desc
= E1000_CONTEXT_DESC(*tx_ring
, i
);
2832 buffer_info
= &tx_ring
->buffer_info
[i
];
2834 context_desc
->lower_setup
.ip_fields
.ipcss
= ipcss
;
2835 context_desc
->lower_setup
.ip_fields
.ipcso
= ipcso
;
2836 context_desc
->lower_setup
.ip_fields
.ipcse
= cpu_to_le16(ipcse
);
2837 context_desc
->upper_setup
.tcp_fields
.tucss
= tucss
;
2838 context_desc
->upper_setup
.tcp_fields
.tucso
= tucso
;
2839 context_desc
->upper_setup
.tcp_fields
.tucse
= cpu_to_le16(tucse
);
2840 context_desc
->tcp_seg_setup
.fields
.mss
= cpu_to_le16(mss
);
2841 context_desc
->tcp_seg_setup
.fields
.hdr_len
= hdr_len
;
2842 context_desc
->cmd_and_length
= cpu_to_le32(cmd_length
);
2844 buffer_info
->time_stamp
= jiffies
;
2845 buffer_info
->next_to_watch
= i
;
2847 if (++i
== tx_ring
->count
) i
= 0;
2848 tx_ring
->next_to_use
= i
;
2855 static bool e1000_tx_csum(struct e1000_adapter
*adapter
,
2856 struct e1000_tx_ring
*tx_ring
, struct sk_buff
*skb
)
2858 struct e1000_context_desc
*context_desc
;
2859 struct e1000_buffer
*buffer_info
;
2862 u32 cmd_len
= E1000_TXD_CMD_DEXT
;
2864 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
)
2867 switch (skb
->protocol
) {
2868 case __constant_htons(ETH_P_IP
):
2869 if (ip_hdr(skb
)->protocol
== IPPROTO_TCP
)
2870 cmd_len
|= E1000_TXD_CMD_TCP
;
2872 case __constant_htons(ETH_P_IPV6
):
2873 /* XXX not handling all IPV6 headers */
2874 if (ipv6_hdr(skb
)->nexthdr
== IPPROTO_TCP
)
2875 cmd_len
|= E1000_TXD_CMD_TCP
;
2878 if (unlikely(net_ratelimit()))
2879 DPRINTK(DRV
, WARNING
,
2880 "checksum_partial proto=%x!\n", skb
->protocol
);
2884 css
= skb_transport_offset(skb
);
2886 i
= tx_ring
->next_to_use
;
2887 buffer_info
= &tx_ring
->buffer_info
[i
];
2888 context_desc
= E1000_CONTEXT_DESC(*tx_ring
, i
);
2890 context_desc
->lower_setup
.ip_config
= 0;
2891 context_desc
->upper_setup
.tcp_fields
.tucss
= css
;
2892 context_desc
->upper_setup
.tcp_fields
.tucso
=
2893 css
+ skb
->csum_offset
;
2894 context_desc
->upper_setup
.tcp_fields
.tucse
= 0;
2895 context_desc
->tcp_seg_setup
.data
= 0;
2896 context_desc
->cmd_and_length
= cpu_to_le32(cmd_len
);
2898 buffer_info
->time_stamp
= jiffies
;
2899 buffer_info
->next_to_watch
= i
;
2901 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
2902 tx_ring
->next_to_use
= i
;
2907 #define E1000_MAX_TXD_PWR 12
2908 #define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
2910 static int e1000_tx_map(struct e1000_adapter
*adapter
,
2911 struct e1000_tx_ring
*tx_ring
,
2912 struct sk_buff
*skb
, unsigned int first
,
2913 unsigned int max_per_txd
, unsigned int nr_frags
,
2916 struct e1000_hw
*hw
= &adapter
->hw
;
2917 struct e1000_buffer
*buffer_info
;
2918 unsigned int len
= skb
->len
;
2919 unsigned int offset
= 0, size
, count
= 0, i
;
2921 len
-= skb
->data_len
;
2923 i
= tx_ring
->next_to_use
;
2926 buffer_info
= &tx_ring
->buffer_info
[i
];
2927 size
= min(len
, max_per_txd
);
2928 /* Workaround for Controller erratum --
2929 * descriptor for non-tso packet in a linear SKB that follows a
2930 * tso gets written back prematurely before the data is fully
2931 * DMA'd to the controller */
2932 if (!skb
->data_len
&& tx_ring
->last_tx_tso
&&
2934 tx_ring
->last_tx_tso
= 0;
2938 /* Workaround for premature desc write-backs
2939 * in TSO mode. Append 4-byte sentinel desc */
2940 if (unlikely(mss
&& !nr_frags
&& size
== len
&& size
> 8))
2942 /* work-around for errata 10 and it applies
2943 * to all controllers in PCI-X mode
2944 * The fix is to make sure that the first descriptor of a
2945 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2947 if (unlikely((hw
->bus_type
== e1000_bus_type_pcix
) &&
2948 (size
> 2015) && count
== 0))
2951 /* Workaround for potential 82544 hang in PCI-X. Avoid
2952 * terminating buffers within evenly-aligned dwords. */
2953 if (unlikely(adapter
->pcix_82544
&&
2954 !((unsigned long)(skb
->data
+ offset
+ size
- 1) & 4) &&
2958 buffer_info
->length
= size
;
2960 pci_map_single(adapter
->pdev
,
2964 buffer_info
->time_stamp
= jiffies
;
2965 buffer_info
->next_to_watch
= i
;
2970 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
2973 for (f
= 0; f
< nr_frags
; f
++) {
2974 struct skb_frag_struct
*frag
;
2976 frag
= &skb_shinfo(skb
)->frags
[f
];
2978 offset
= frag
->page_offset
;
2981 buffer_info
= &tx_ring
->buffer_info
[i
];
2982 size
= min(len
, max_per_txd
);
2983 /* Workaround for premature desc write-backs
2984 * in TSO mode. Append 4-byte sentinel desc */
2985 if (unlikely(mss
&& f
== (nr_frags
-1) && size
== len
&& size
> 8))
2987 /* Workaround for potential 82544 hang in PCI-X.
2988 * Avoid terminating buffers within evenly-aligned
2990 if (unlikely(adapter
->pcix_82544
&&
2991 !((unsigned long)(frag
->page
+offset
+size
-1) & 4) &&
2995 buffer_info
->length
= size
;
2997 pci_map_page(adapter
->pdev
,
3002 buffer_info
->time_stamp
= jiffies
;
3003 buffer_info
->next_to_watch
= i
;
3008 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
3012 i
= (i
== 0) ? tx_ring
->count
- 1 : i
- 1;
3013 tx_ring
->buffer_info
[i
].skb
= skb
;
3014 tx_ring
->buffer_info
[first
].next_to_watch
= i
;
3019 static void e1000_tx_queue(struct e1000_adapter
*adapter
,
3020 struct e1000_tx_ring
*tx_ring
, int tx_flags
,
3023 struct e1000_hw
*hw
= &adapter
->hw
;
3024 struct e1000_tx_desc
*tx_desc
= NULL
;
3025 struct e1000_buffer
*buffer_info
;
3026 u32 txd_upper
= 0, txd_lower
= E1000_TXD_CMD_IFCS
;
3029 if (likely(tx_flags
& E1000_TX_FLAGS_TSO
)) {
3030 txd_lower
|= E1000_TXD_CMD_DEXT
| E1000_TXD_DTYP_D
|
3032 txd_upper
|= E1000_TXD_POPTS_TXSM
<< 8;
3034 if (likely(tx_flags
& E1000_TX_FLAGS_IPV4
))
3035 txd_upper
|= E1000_TXD_POPTS_IXSM
<< 8;
3038 if (likely(tx_flags
& E1000_TX_FLAGS_CSUM
)) {
3039 txd_lower
|= E1000_TXD_CMD_DEXT
| E1000_TXD_DTYP_D
;
3040 txd_upper
|= E1000_TXD_POPTS_TXSM
<< 8;
3043 if (unlikely(tx_flags
& E1000_TX_FLAGS_VLAN
)) {
3044 txd_lower
|= E1000_TXD_CMD_VLE
;
3045 txd_upper
|= (tx_flags
& E1000_TX_FLAGS_VLAN_MASK
);
3048 i
= tx_ring
->next_to_use
;
3051 buffer_info
= &tx_ring
->buffer_info
[i
];
3052 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3053 tx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
3054 tx_desc
->lower
.data
=
3055 cpu_to_le32(txd_lower
| buffer_info
->length
);
3056 tx_desc
->upper
.data
= cpu_to_le32(txd_upper
);
3057 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
3060 tx_desc
->lower
.data
|= cpu_to_le32(adapter
->txd_cmd
);
3062 /* Force memory writes to complete before letting h/w
3063 * know there are new descriptors to fetch. (Only
3064 * applicable for weak-ordered memory model archs,
3065 * such as IA-64). */
3068 tx_ring
->next_to_use
= i
;
3069 writel(i
, hw
->hw_addr
+ tx_ring
->tdt
);
3070 /* we need this if more than one processor can write to our tail
3071 * at a time, it syncronizes IO on IA64/Altix systems */
3076 * 82547 workaround to avoid controller hang in half-duplex environment.
3077 * The workaround is to avoid queuing a large packet that would span
3078 * the internal Tx FIFO ring boundary by notifying the stack to resend
3079 * the packet at a later time. This gives the Tx FIFO an opportunity to
3080 * flush all packets. When that occurs, we reset the Tx FIFO pointers
3081 * to the beginning of the Tx FIFO.
3084 #define E1000_FIFO_HDR 0x10
3085 #define E1000_82547_PAD_LEN 0x3E0
3087 static int e1000_82547_fifo_workaround(struct e1000_adapter
*adapter
,
3088 struct sk_buff
*skb
)
3090 u32 fifo_space
= adapter
->tx_fifo_size
- adapter
->tx_fifo_head
;
3091 u32 skb_fifo_len
= skb
->len
+ E1000_FIFO_HDR
;
3093 skb_fifo_len
= ALIGN(skb_fifo_len
, E1000_FIFO_HDR
);
3095 if (adapter
->link_duplex
!= HALF_DUPLEX
)
3096 goto no_fifo_stall_required
;
3098 if (atomic_read(&adapter
->tx_fifo_stall
))
3101 if (skb_fifo_len
>= (E1000_82547_PAD_LEN
+ fifo_space
)) {
3102 atomic_set(&adapter
->tx_fifo_stall
, 1);
3106 no_fifo_stall_required
:
3107 adapter
->tx_fifo_head
+= skb_fifo_len
;
3108 if (adapter
->tx_fifo_head
>= adapter
->tx_fifo_size
)
3109 adapter
->tx_fifo_head
-= adapter
->tx_fifo_size
;
3113 #define MINIMUM_DHCP_PACKET_SIZE 282
3114 static int e1000_transfer_dhcp_info(struct e1000_adapter
*adapter
,
3115 struct sk_buff
*skb
)
3117 struct e1000_hw
*hw
= &adapter
->hw
;
3119 if (vlan_tx_tag_present(skb
)) {
3120 if (!((vlan_tx_tag_get(skb
) == hw
->mng_cookie
.vlan_id
) &&
3121 ( hw
->mng_cookie
.status
&
3122 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
)) )
3125 if (skb
->len
> MINIMUM_DHCP_PACKET_SIZE
) {
3126 struct ethhdr
*eth
= (struct ethhdr
*)skb
->data
;
3127 if ((htons(ETH_P_IP
) == eth
->h_proto
)) {
3128 const struct iphdr
*ip
=
3129 (struct iphdr
*)((u8
*)skb
->data
+14);
3130 if (IPPROTO_UDP
== ip
->protocol
) {
3131 struct udphdr
*udp
=
3132 (struct udphdr
*)((u8
*)ip
+
3134 if (ntohs(udp
->dest
) == 67) {
3135 offset
= (u8
*)udp
+ 8 - skb
->data
;
3136 length
= skb
->len
- offset
;
3138 return e1000_mng_write_dhcp_info(hw
,
3148 static int __e1000_maybe_stop_tx(struct net_device
*netdev
, int size
)
3150 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3151 struct e1000_tx_ring
*tx_ring
= adapter
->tx_ring
;
3153 netif_stop_queue(netdev
);
3154 /* Herbert's original patch had:
3155 * smp_mb__after_netif_stop_queue();
3156 * but since that doesn't exist yet, just open code it. */
3159 /* We need to check again in a case another CPU has just
3160 * made room available. */
3161 if (likely(E1000_DESC_UNUSED(tx_ring
) < size
))
3165 netif_start_queue(netdev
);
3166 ++adapter
->restart_queue
;
3170 static int e1000_maybe_stop_tx(struct net_device
*netdev
,
3171 struct e1000_tx_ring
*tx_ring
, int size
)
3173 if (likely(E1000_DESC_UNUSED(tx_ring
) >= size
))
3175 return __e1000_maybe_stop_tx(netdev
, size
);
3178 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
3179 static int e1000_xmit_frame(struct sk_buff
*skb
, struct net_device
*netdev
)
3181 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3182 struct e1000_hw
*hw
= &adapter
->hw
;
3183 struct e1000_tx_ring
*tx_ring
;
3184 unsigned int first
, max_per_txd
= E1000_MAX_DATA_PER_TXD
;
3185 unsigned int max_txd_pwr
= E1000_MAX_TXD_PWR
;
3186 unsigned int tx_flags
= 0;
3187 unsigned int len
= skb
->len
- skb
->data_len
;
3188 unsigned long flags
;
3189 unsigned int nr_frags
;
3195 /* This goes back to the question of how to logically map a tx queue
3196 * to a flow. Right now, performance is impacted slightly negatively
3197 * if using multiple tx queues. If the stack breaks away from a
3198 * single qdisc implementation, we can look at this again. */
3199 tx_ring
= adapter
->tx_ring
;
3201 if (unlikely(skb
->len
<= 0)) {
3202 dev_kfree_skb_any(skb
);
3203 return NETDEV_TX_OK
;
3206 /* 82571 and newer doesn't need the workaround that limited descriptor
3208 if (hw
->mac_type
>= e1000_82571
)
3211 mss
= skb_shinfo(skb
)->gso_size
;
3212 /* The controller does a simple calculation to
3213 * make sure there is enough room in the FIFO before
3214 * initiating the DMA for each buffer. The calc is:
3215 * 4 = ceil(buffer len/mss). To make sure we don't
3216 * overrun the FIFO, adjust the max buffer len if mss
3220 max_per_txd
= min(mss
<< 2, max_per_txd
);
3221 max_txd_pwr
= fls(max_per_txd
) - 1;
3223 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
3224 * points to just header, pull a few bytes of payload from
3225 * frags into skb->data */
3226 hdr_len
= skb_transport_offset(skb
) + tcp_hdrlen(skb
);
3227 if (skb
->data_len
&& hdr_len
== len
) {
3228 switch (hw
->mac_type
) {
3229 unsigned int pull_size
;
3231 /* Make sure we have room to chop off 4 bytes,
3232 * and that the end alignment will work out to
3233 * this hardware's requirements
3234 * NOTE: this is a TSO only workaround
3235 * if end byte alignment not correct move us
3236 * into the next dword */
3237 if ((unsigned long)(skb_tail_pointer(skb
) - 1) & 4)
3244 pull_size
= min((unsigned int)4, skb
->data_len
);
3245 if (!__pskb_pull_tail(skb
, pull_size
)) {
3247 "__pskb_pull_tail failed.\n");
3248 dev_kfree_skb_any(skb
);
3249 return NETDEV_TX_OK
;
3251 len
= skb
->len
- skb
->data_len
;
3260 /* reserve a descriptor for the offload context */
3261 if ((mss
) || (skb
->ip_summed
== CHECKSUM_PARTIAL
))
3265 /* Controller Erratum workaround */
3266 if (!skb
->data_len
&& tx_ring
->last_tx_tso
&& !skb_is_gso(skb
))
3269 count
+= TXD_USE_COUNT(len
, max_txd_pwr
);
3271 if (adapter
->pcix_82544
)
3274 /* work-around for errata 10 and it applies to all controllers
3275 * in PCI-X mode, so add one more descriptor to the count
3277 if (unlikely((hw
->bus_type
== e1000_bus_type_pcix
) &&
3281 nr_frags
= skb_shinfo(skb
)->nr_frags
;
3282 for (f
= 0; f
< nr_frags
; f
++)
3283 count
+= TXD_USE_COUNT(skb_shinfo(skb
)->frags
[f
].size
,
3285 if (adapter
->pcix_82544
)
3289 if (hw
->tx_pkt_filtering
&&
3290 (hw
->mac_type
== e1000_82573
))
3291 e1000_transfer_dhcp_info(adapter
, skb
);
3293 if (!spin_trylock_irqsave(&tx_ring
->tx_lock
, flags
))
3294 /* Collision - tell upper layer to requeue */
3295 return NETDEV_TX_LOCKED
;
3297 /* need: count + 2 desc gap to keep tail from touching
3298 * head, otherwise try next time */
3299 if (unlikely(e1000_maybe_stop_tx(netdev
, tx_ring
, count
+ 2))) {
3300 spin_unlock_irqrestore(&tx_ring
->tx_lock
, flags
);
3301 return NETDEV_TX_BUSY
;
3304 if (unlikely(hw
->mac_type
== e1000_82547
)) {
3305 if (unlikely(e1000_82547_fifo_workaround(adapter
, skb
))) {
3306 netif_stop_queue(netdev
);
3307 mod_timer(&adapter
->tx_fifo_stall_timer
, jiffies
+ 1);
3308 spin_unlock_irqrestore(&tx_ring
->tx_lock
, flags
);
3309 return NETDEV_TX_BUSY
;
3313 if (unlikely(adapter
->vlgrp
&& vlan_tx_tag_present(skb
))) {
3314 tx_flags
|= E1000_TX_FLAGS_VLAN
;
3315 tx_flags
|= (vlan_tx_tag_get(skb
) << E1000_TX_FLAGS_VLAN_SHIFT
);
3318 first
= tx_ring
->next_to_use
;
3320 tso
= e1000_tso(adapter
, tx_ring
, skb
);
3322 dev_kfree_skb_any(skb
);
3323 spin_unlock_irqrestore(&tx_ring
->tx_lock
, flags
);
3324 return NETDEV_TX_OK
;
3328 tx_ring
->last_tx_tso
= 1;
3329 tx_flags
|= E1000_TX_FLAGS_TSO
;
3330 } else if (likely(e1000_tx_csum(adapter
, tx_ring
, skb
)))
3331 tx_flags
|= E1000_TX_FLAGS_CSUM
;
3333 /* Old method was to assume IPv4 packet by default if TSO was enabled.
3334 * 82571 hardware supports TSO capabilities for IPv6 as well...
3335 * no longer assume, we must. */
3336 if (likely(skb
->protocol
== htons(ETH_P_IP
)))
3337 tx_flags
|= E1000_TX_FLAGS_IPV4
;
3339 e1000_tx_queue(adapter
, tx_ring
, tx_flags
,
3340 e1000_tx_map(adapter
, tx_ring
, skb
, first
,
3341 max_per_txd
, nr_frags
, mss
));
3343 netdev
->trans_start
= jiffies
;
3345 /* Make sure there is space in the ring for the next send. */
3346 e1000_maybe_stop_tx(netdev
, tx_ring
, MAX_SKB_FRAGS
+ 2);
3348 spin_unlock_irqrestore(&tx_ring
->tx_lock
, flags
);
3349 return NETDEV_TX_OK
;
3353 * e1000_tx_timeout - Respond to a Tx Hang
3354 * @netdev: network interface device structure
3357 static void e1000_tx_timeout(struct net_device
*netdev
)
3359 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3361 /* Do the reset outside of interrupt context */
3362 adapter
->tx_timeout_count
++;
3363 schedule_work(&adapter
->reset_task
);
3366 static void e1000_reset_task(struct work_struct
*work
)
3368 struct e1000_adapter
*adapter
=
3369 container_of(work
, struct e1000_adapter
, reset_task
);
3371 e1000_reinit_locked(adapter
);
3375 * e1000_get_stats - Get System Network Statistics
3376 * @netdev: network interface device structure
3378 * Returns the address of the device statistics structure.
3379 * The statistics are actually updated from the timer callback.
3382 static struct net_device_stats
*e1000_get_stats(struct net_device
*netdev
)
3384 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3386 /* only return the current stats */
3387 return &adapter
->net_stats
;
3391 * e1000_change_mtu - Change the Maximum Transfer Unit
3392 * @netdev: network interface device structure
3393 * @new_mtu: new value for maximum frame size
3395 * Returns 0 on success, negative on failure
3398 static int e1000_change_mtu(struct net_device
*netdev
, int new_mtu
)
3400 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3401 struct e1000_hw
*hw
= &adapter
->hw
;
3402 int max_frame
= new_mtu
+ ENET_HEADER_SIZE
+ ETHERNET_FCS_SIZE
;
3403 u16 eeprom_data
= 0;
3405 if ((max_frame
< MINIMUM_ETHERNET_FRAME_SIZE
) ||
3406 (max_frame
> MAX_JUMBO_FRAME_SIZE
)) {
3407 DPRINTK(PROBE
, ERR
, "Invalid MTU setting\n");
3411 /* Adapter-specific max frame size limits. */
3412 switch (hw
->mac_type
) {
3413 case e1000_undefined
... e1000_82542_rev2_1
:
3415 if (max_frame
> MAXIMUM_ETHERNET_FRAME_SIZE
) {
3416 DPRINTK(PROBE
, ERR
, "Jumbo Frames not supported.\n");
3421 /* Jumbo Frames not supported if:
3422 * - this is not an 82573L device
3423 * - ASPM is enabled in any way (0x1A bits 3:2) */
3424 e1000_read_eeprom(hw
, EEPROM_INIT_3GIO_3
, 1,
3426 if ((hw
->device_id
!= E1000_DEV_ID_82573L
) ||
3427 (eeprom_data
& EEPROM_WORD1A_ASPM_MASK
)) {
3428 if (max_frame
> MAXIMUM_ETHERNET_FRAME_SIZE
) {
3430 "Jumbo Frames not supported.\n");
3435 /* ERT will be enabled later to enable wire speed receives */
3437 /* fall through to get support */
3440 case e1000_80003es2lan
:
3441 #define MAX_STD_JUMBO_FRAME_SIZE 9234
3442 if (max_frame
> MAX_STD_JUMBO_FRAME_SIZE
) {
3443 DPRINTK(PROBE
, ERR
, "MTU > 9216 not supported.\n");
3448 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3452 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3453 * means we reserve 2 more, this pushes us to allocate from the next
3455 * i.e. RXBUFFER_2048 --> size-4096 slab */
3457 if (max_frame
<= E1000_RXBUFFER_256
)
3458 adapter
->rx_buffer_len
= E1000_RXBUFFER_256
;
3459 else if (max_frame
<= E1000_RXBUFFER_512
)
3460 adapter
->rx_buffer_len
= E1000_RXBUFFER_512
;
3461 else if (max_frame
<= E1000_RXBUFFER_1024
)
3462 adapter
->rx_buffer_len
= E1000_RXBUFFER_1024
;
3463 else if (max_frame
<= E1000_RXBUFFER_2048
)
3464 adapter
->rx_buffer_len
= E1000_RXBUFFER_2048
;
3465 else if (max_frame
<= E1000_RXBUFFER_4096
)
3466 adapter
->rx_buffer_len
= E1000_RXBUFFER_4096
;
3467 else if (max_frame
<= E1000_RXBUFFER_8192
)
3468 adapter
->rx_buffer_len
= E1000_RXBUFFER_8192
;
3469 else if (max_frame
<= E1000_RXBUFFER_16384
)
3470 adapter
->rx_buffer_len
= E1000_RXBUFFER_16384
;
3472 /* adjust allocation if LPE protects us, and we aren't using SBP */
3473 if (!hw
->tbi_compatibility_on
&&
3474 ((max_frame
== MAXIMUM_ETHERNET_FRAME_SIZE
) ||
3475 (max_frame
== MAXIMUM_ETHERNET_VLAN_SIZE
)))
3476 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
3478 netdev
->mtu
= new_mtu
;
3479 hw
->max_frame_size
= max_frame
;
3481 if (netif_running(netdev
))
3482 e1000_reinit_locked(adapter
);
3488 * e1000_update_stats - Update the board statistics counters
3489 * @adapter: board private structure
3492 void e1000_update_stats(struct e1000_adapter
*adapter
)
3494 struct e1000_hw
*hw
= &adapter
->hw
;
3495 struct pci_dev
*pdev
= adapter
->pdev
;
3496 unsigned long flags
;
3499 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3502 * Prevent stats update while adapter is being reset, or if the pci
3503 * connection is down.
3505 if (adapter
->link_speed
== 0)
3507 if (pci_channel_offline(pdev
))
3510 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
3512 /* these counters are modified from e1000_tbi_adjust_stats,
3513 * called from the interrupt context, so they must only
3514 * be written while holding adapter->stats_lock
3517 adapter
->stats
.crcerrs
+= er32(CRCERRS
);
3518 adapter
->stats
.gprc
+= er32(GPRC
);
3519 adapter
->stats
.gorcl
+= er32(GORCL
);
3520 adapter
->stats
.gorch
+= er32(GORCH
);
3521 adapter
->stats
.bprc
+= er32(BPRC
);
3522 adapter
->stats
.mprc
+= er32(MPRC
);
3523 adapter
->stats
.roc
+= er32(ROC
);
3525 if (hw
->mac_type
!= e1000_ich8lan
) {
3526 adapter
->stats
.prc64
+= er32(PRC64
);
3527 adapter
->stats
.prc127
+= er32(PRC127
);
3528 adapter
->stats
.prc255
+= er32(PRC255
);
3529 adapter
->stats
.prc511
+= er32(PRC511
);
3530 adapter
->stats
.prc1023
+= er32(PRC1023
);
3531 adapter
->stats
.prc1522
+= er32(PRC1522
);
3534 adapter
->stats
.symerrs
+= er32(SYMERRS
);
3535 adapter
->stats
.mpc
+= er32(MPC
);
3536 adapter
->stats
.scc
+= er32(SCC
);
3537 adapter
->stats
.ecol
+= er32(ECOL
);
3538 adapter
->stats
.mcc
+= er32(MCC
);
3539 adapter
->stats
.latecol
+= er32(LATECOL
);
3540 adapter
->stats
.dc
+= er32(DC
);
3541 adapter
->stats
.sec
+= er32(SEC
);
3542 adapter
->stats
.rlec
+= er32(RLEC
);
3543 adapter
->stats
.xonrxc
+= er32(XONRXC
);
3544 adapter
->stats
.xontxc
+= er32(XONTXC
);
3545 adapter
->stats
.xoffrxc
+= er32(XOFFRXC
);
3546 adapter
->stats
.xofftxc
+= er32(XOFFTXC
);
3547 adapter
->stats
.fcruc
+= er32(FCRUC
);
3548 adapter
->stats
.gptc
+= er32(GPTC
);
3549 adapter
->stats
.gotcl
+= er32(GOTCL
);
3550 adapter
->stats
.gotch
+= er32(GOTCH
);
3551 adapter
->stats
.rnbc
+= er32(RNBC
);
3552 adapter
->stats
.ruc
+= er32(RUC
);
3553 adapter
->stats
.rfc
+= er32(RFC
);
3554 adapter
->stats
.rjc
+= er32(RJC
);
3555 adapter
->stats
.torl
+= er32(TORL
);
3556 adapter
->stats
.torh
+= er32(TORH
);
3557 adapter
->stats
.totl
+= er32(TOTL
);
3558 adapter
->stats
.toth
+= er32(TOTH
);
3559 adapter
->stats
.tpr
+= er32(TPR
);
3561 if (hw
->mac_type
!= e1000_ich8lan
) {
3562 adapter
->stats
.ptc64
+= er32(PTC64
);
3563 adapter
->stats
.ptc127
+= er32(PTC127
);
3564 adapter
->stats
.ptc255
+= er32(PTC255
);
3565 adapter
->stats
.ptc511
+= er32(PTC511
);
3566 adapter
->stats
.ptc1023
+= er32(PTC1023
);
3567 adapter
->stats
.ptc1522
+= er32(PTC1522
);
3570 adapter
->stats
.mptc
+= er32(MPTC
);
3571 adapter
->stats
.bptc
+= er32(BPTC
);
3573 /* used for adaptive IFS */
3575 hw
->tx_packet_delta
= er32(TPT
);
3576 adapter
->stats
.tpt
+= hw
->tx_packet_delta
;
3577 hw
->collision_delta
= er32(COLC
);
3578 adapter
->stats
.colc
+= hw
->collision_delta
;
3580 if (hw
->mac_type
>= e1000_82543
) {
3581 adapter
->stats
.algnerrc
+= er32(ALGNERRC
);
3582 adapter
->stats
.rxerrc
+= er32(RXERRC
);
3583 adapter
->stats
.tncrs
+= er32(TNCRS
);
3584 adapter
->stats
.cexterr
+= er32(CEXTERR
);
3585 adapter
->stats
.tsctc
+= er32(TSCTC
);
3586 adapter
->stats
.tsctfc
+= er32(TSCTFC
);
3588 if (hw
->mac_type
> e1000_82547_rev_2
) {
3589 adapter
->stats
.iac
+= er32(IAC
);
3590 adapter
->stats
.icrxoc
+= er32(ICRXOC
);
3592 if (hw
->mac_type
!= e1000_ich8lan
) {
3593 adapter
->stats
.icrxptc
+= er32(ICRXPTC
);
3594 adapter
->stats
.icrxatc
+= er32(ICRXATC
);
3595 adapter
->stats
.ictxptc
+= er32(ICTXPTC
);
3596 adapter
->stats
.ictxatc
+= er32(ICTXATC
);
3597 adapter
->stats
.ictxqec
+= er32(ICTXQEC
);
3598 adapter
->stats
.ictxqmtc
+= er32(ICTXQMTC
);
3599 adapter
->stats
.icrxdmtc
+= er32(ICRXDMTC
);
3603 /* Fill out the OS statistics structure */
3604 adapter
->net_stats
.multicast
= adapter
->stats
.mprc
;
3605 adapter
->net_stats
.collisions
= adapter
->stats
.colc
;
3609 /* RLEC on some newer hardware can be incorrect so build
3610 * our own version based on RUC and ROC */
3611 adapter
->net_stats
.rx_errors
= adapter
->stats
.rxerrc
+
3612 adapter
->stats
.crcerrs
+ adapter
->stats
.algnerrc
+
3613 adapter
->stats
.ruc
+ adapter
->stats
.roc
+
3614 adapter
->stats
.cexterr
;
3615 adapter
->stats
.rlerrc
= adapter
->stats
.ruc
+ adapter
->stats
.roc
;
3616 adapter
->net_stats
.rx_length_errors
= adapter
->stats
.rlerrc
;
3617 adapter
->net_stats
.rx_crc_errors
= adapter
->stats
.crcerrs
;
3618 adapter
->net_stats
.rx_frame_errors
= adapter
->stats
.algnerrc
;
3619 adapter
->net_stats
.rx_missed_errors
= adapter
->stats
.mpc
;
3622 adapter
->stats
.txerrc
= adapter
->stats
.ecol
+ adapter
->stats
.latecol
;
3623 adapter
->net_stats
.tx_errors
= adapter
->stats
.txerrc
;
3624 adapter
->net_stats
.tx_aborted_errors
= adapter
->stats
.ecol
;
3625 adapter
->net_stats
.tx_window_errors
= adapter
->stats
.latecol
;
3626 adapter
->net_stats
.tx_carrier_errors
= adapter
->stats
.tncrs
;
3627 if (hw
->bad_tx_carr_stats_fd
&&
3628 adapter
->link_duplex
== FULL_DUPLEX
) {
3629 adapter
->net_stats
.tx_carrier_errors
= 0;
3630 adapter
->stats
.tncrs
= 0;
3633 /* Tx Dropped needs to be maintained elsewhere */
3636 if (hw
->media_type
== e1000_media_type_copper
) {
3637 if ((adapter
->link_speed
== SPEED_1000
) &&
3638 (!e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_tmp
))) {
3639 phy_tmp
&= PHY_IDLE_ERROR_COUNT_MASK
;
3640 adapter
->phy_stats
.idle_errors
+= phy_tmp
;
3643 if ((hw
->mac_type
<= e1000_82546
) &&
3644 (hw
->phy_type
== e1000_phy_m88
) &&
3645 !e1000_read_phy_reg(hw
, M88E1000_RX_ERR_CNTR
, &phy_tmp
))
3646 adapter
->phy_stats
.receive_errors
+= phy_tmp
;
3649 /* Management Stats */
3650 if (hw
->has_smbus
) {
3651 adapter
->stats
.mgptc
+= er32(MGTPTC
);
3652 adapter
->stats
.mgprc
+= er32(MGTPRC
);
3653 adapter
->stats
.mgpdc
+= er32(MGTPDC
);
3656 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
3660 * e1000_intr_msi - Interrupt Handler
3661 * @irq: interrupt number
3662 * @data: pointer to a network interface device structure
3665 static irqreturn_t
e1000_intr_msi(int irq
, void *data
)
3667 struct net_device
*netdev
= data
;
3668 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3669 struct e1000_hw
*hw
= &adapter
->hw
;
3670 u32 icr
= er32(ICR
);
3672 /* in NAPI mode read ICR disables interrupts using IAM */
3674 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
3675 hw
->get_link_status
= 1;
3676 /* 80003ES2LAN workaround-- For packet buffer work-around on
3677 * link down event; disable receives here in the ISR and reset
3678 * adapter in watchdog */
3679 if (netif_carrier_ok(netdev
) &&
3680 (hw
->mac_type
== e1000_80003es2lan
)) {
3681 /* disable receives */
3682 u32 rctl
= er32(RCTL
);
3683 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
3685 /* guard against interrupt when we're going down */
3686 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3687 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
3690 if (likely(netif_rx_schedule_prep(&adapter
->napi
))) {
3691 adapter
->total_tx_bytes
= 0;
3692 adapter
->total_tx_packets
= 0;
3693 adapter
->total_rx_bytes
= 0;
3694 adapter
->total_rx_packets
= 0;
3695 __netif_rx_schedule(&adapter
->napi
);
3697 e1000_irq_enable(adapter
);
3703 * e1000_intr - Interrupt Handler
3704 * @irq: interrupt number
3705 * @data: pointer to a network interface device structure
3708 static irqreturn_t
e1000_intr(int irq
, void *data
)
3710 struct net_device
*netdev
= data
;
3711 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3712 struct e1000_hw
*hw
= &adapter
->hw
;
3713 u32 rctl
, icr
= er32(ICR
);
3716 return IRQ_NONE
; /* Not our interrupt */
3718 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
3719 * not set, then the adapter didn't send an interrupt */
3720 if (unlikely(hw
->mac_type
>= e1000_82571
&&
3721 !(icr
& E1000_ICR_INT_ASSERTED
)))
3724 /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
3725 * need for the IMC write */
3727 if (unlikely(icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
))) {
3728 hw
->get_link_status
= 1;
3729 /* 80003ES2LAN workaround--
3730 * For packet buffer work-around on link down event;
3731 * disable receives here in the ISR and
3732 * reset adapter in watchdog
3734 if (netif_carrier_ok(netdev
) &&
3735 (hw
->mac_type
== e1000_80003es2lan
)) {
3736 /* disable receives */
3738 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
3740 /* guard against interrupt when we're going down */
3741 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3742 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
3745 if (unlikely(hw
->mac_type
< e1000_82571
)) {
3746 /* disable interrupts, without the synchronize_irq bit */
3748 E1000_WRITE_FLUSH();
3750 if (likely(netif_rx_schedule_prep(&adapter
->napi
))) {
3751 adapter
->total_tx_bytes
= 0;
3752 adapter
->total_tx_packets
= 0;
3753 adapter
->total_rx_bytes
= 0;
3754 adapter
->total_rx_packets
= 0;
3755 __netif_rx_schedule(&adapter
->napi
);
3757 /* this really should not happen! if it does it is basically a
3758 * bug, but not a hard error, so enable ints and continue */
3759 e1000_irq_enable(adapter
);
3765 * e1000_clean - NAPI Rx polling callback
3766 * @adapter: board private structure
3768 static int e1000_clean(struct napi_struct
*napi
, int budget
)
3770 struct e1000_adapter
*adapter
= container_of(napi
, struct e1000_adapter
, napi
);
3771 struct net_device
*poll_dev
= adapter
->netdev
;
3772 int tx_cleaned
= 0, work_done
= 0;
3774 adapter
= netdev_priv(poll_dev
);
3776 /* e1000_clean is called per-cpu. This lock protects
3777 * tx_ring[0] from being cleaned by multiple cpus
3778 * simultaneously. A failure obtaining the lock means
3779 * tx_ring[0] is currently being cleaned anyway. */
3780 if (spin_trylock(&adapter
->tx_queue_lock
)) {
3781 tx_cleaned
= e1000_clean_tx_irq(adapter
,
3782 &adapter
->tx_ring
[0]);
3783 spin_unlock(&adapter
->tx_queue_lock
);
3786 adapter
->clean_rx(adapter
, &adapter
->rx_ring
[0],
3787 &work_done
, budget
);
3792 /* If budget not fully consumed, exit the polling mode */
3793 if (work_done
< budget
) {
3794 if (likely(adapter
->itr_setting
& 3))
3795 e1000_set_itr(adapter
);
3796 netif_rx_complete(napi
);
3797 e1000_irq_enable(adapter
);
3804 * e1000_clean_tx_irq - Reclaim resources after transmit completes
3805 * @adapter: board private structure
3807 static bool e1000_clean_tx_irq(struct e1000_adapter
*adapter
,
3808 struct e1000_tx_ring
*tx_ring
)
3810 struct e1000_hw
*hw
= &adapter
->hw
;
3811 struct net_device
*netdev
= adapter
->netdev
;
3812 struct e1000_tx_desc
*tx_desc
, *eop_desc
;
3813 struct e1000_buffer
*buffer_info
;
3814 unsigned int i
, eop
;
3815 unsigned int count
= 0;
3816 bool cleaned
= false;
3817 unsigned int total_tx_bytes
=0, total_tx_packets
=0;
3819 i
= tx_ring
->next_to_clean
;
3820 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
3821 eop_desc
= E1000_TX_DESC(*tx_ring
, eop
);
3823 while (eop_desc
->upper
.data
& cpu_to_le32(E1000_TXD_STAT_DD
)) {
3824 for (cleaned
= false; !cleaned
; ) {
3825 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3826 buffer_info
= &tx_ring
->buffer_info
[i
];
3827 cleaned
= (i
== eop
);
3830 struct sk_buff
*skb
= buffer_info
->skb
;
3831 unsigned int segs
, bytecount
;
3832 segs
= skb_shinfo(skb
)->gso_segs
?: 1;
3833 /* multiply data chunks by size of headers */
3834 bytecount
= ((segs
- 1) * skb_headlen(skb
)) +
3836 total_tx_packets
+= segs
;
3837 total_tx_bytes
+= bytecount
;
3839 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
3840 tx_desc
->upper
.data
= 0;
3842 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
3845 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
3846 eop_desc
= E1000_TX_DESC(*tx_ring
, eop
);
3847 #define E1000_TX_WEIGHT 64
3848 /* weight of a sort for tx, to avoid endless transmit cleanup */
3849 if (count
++ == E1000_TX_WEIGHT
)
3853 tx_ring
->next_to_clean
= i
;
3855 #define TX_WAKE_THRESHOLD 32
3856 if (unlikely(cleaned
&& netif_carrier_ok(netdev
) &&
3857 E1000_DESC_UNUSED(tx_ring
) >= TX_WAKE_THRESHOLD
)) {
3858 /* Make sure that anybody stopping the queue after this
3859 * sees the new next_to_clean.
3862 if (netif_queue_stopped(netdev
)) {
3863 netif_wake_queue(netdev
);
3864 ++adapter
->restart_queue
;
3868 if (adapter
->detect_tx_hung
) {
3869 /* Detect a transmit hang in hardware, this serializes the
3870 * check with the clearing of time_stamp and movement of i */
3871 adapter
->detect_tx_hung
= false;
3872 if (tx_ring
->buffer_info
[eop
].dma
&&
3873 time_after(jiffies
, tx_ring
->buffer_info
[eop
].time_stamp
+
3874 (adapter
->tx_timeout_factor
* HZ
))
3875 && !(er32(STATUS
) & E1000_STATUS_TXOFF
)) {
3877 /* detected Tx unit hang */
3878 DPRINTK(DRV
, ERR
, "Detected Tx Unit Hang\n"
3882 " next_to_use <%x>\n"
3883 " next_to_clean <%x>\n"
3884 "buffer_info[next_to_clean]\n"
3885 " time_stamp <%lx>\n"
3886 " next_to_watch <%x>\n"
3888 " next_to_watch.status <%x>\n",
3889 (unsigned long)((tx_ring
- adapter
->tx_ring
) /
3890 sizeof(struct e1000_tx_ring
)),
3891 readl(hw
->hw_addr
+ tx_ring
->tdh
),
3892 readl(hw
->hw_addr
+ tx_ring
->tdt
),
3893 tx_ring
->next_to_use
,
3894 tx_ring
->next_to_clean
,
3895 tx_ring
->buffer_info
[eop
].time_stamp
,
3898 eop_desc
->upper
.fields
.status
);
3899 netif_stop_queue(netdev
);
3902 adapter
->total_tx_bytes
+= total_tx_bytes
;
3903 adapter
->total_tx_packets
+= total_tx_packets
;
3904 adapter
->net_stats
.tx_bytes
+= total_tx_bytes
;
3905 adapter
->net_stats
.tx_packets
+= total_tx_packets
;
3910 * e1000_rx_checksum - Receive Checksum Offload for 82543
3911 * @adapter: board private structure
3912 * @status_err: receive descriptor status and error fields
3913 * @csum: receive descriptor csum field
3914 * @sk_buff: socket buffer with received data
3917 static void e1000_rx_checksum(struct e1000_adapter
*adapter
, u32 status_err
,
3918 u32 csum
, struct sk_buff
*skb
)
3920 struct e1000_hw
*hw
= &adapter
->hw
;
3921 u16 status
= (u16
)status_err
;
3922 u8 errors
= (u8
)(status_err
>> 24);
3923 skb
->ip_summed
= CHECKSUM_NONE
;
3925 /* 82543 or newer only */
3926 if (unlikely(hw
->mac_type
< e1000_82543
)) return;
3927 /* Ignore Checksum bit is set */
3928 if (unlikely(status
& E1000_RXD_STAT_IXSM
)) return;
3929 /* TCP/UDP checksum error bit is set */
3930 if (unlikely(errors
& E1000_RXD_ERR_TCPE
)) {
3931 /* let the stack verify checksum errors */
3932 adapter
->hw_csum_err
++;
3935 /* TCP/UDP Checksum has not been calculated */
3936 if (hw
->mac_type
<= e1000_82547_rev_2
) {
3937 if (!(status
& E1000_RXD_STAT_TCPCS
))
3940 if (!(status
& (E1000_RXD_STAT_TCPCS
| E1000_RXD_STAT_UDPCS
)))
3943 /* It must be a TCP or UDP packet with a valid checksum */
3944 if (likely(status
& E1000_RXD_STAT_TCPCS
)) {
3945 /* TCP checksum is good */
3946 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
3947 } else if (hw
->mac_type
> e1000_82547_rev_2
) {
3948 /* IP fragment with UDP payload */
3949 /* Hardware complements the payload checksum, so we undo it
3950 * and then put the value in host order for further stack use.
3952 __sum16 sum
= (__force __sum16
)htons(csum
);
3953 skb
->csum
= csum_unfold(~sum
);
3954 skb
->ip_summed
= CHECKSUM_COMPLETE
;
3956 adapter
->hw_csum_good
++;
3960 * e1000_clean_rx_irq - Send received data up the network stack; legacy
3961 * @adapter: board private structure
3963 static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter
,
3964 struct e1000_rx_ring
*rx_ring
,
3965 int *work_done
, int work_to_do
)
3967 struct e1000_hw
*hw
= &adapter
->hw
;
3968 struct net_device
*netdev
= adapter
->netdev
;
3969 struct pci_dev
*pdev
= adapter
->pdev
;
3970 struct e1000_rx_desc
*rx_desc
, *next_rxd
;
3971 struct e1000_buffer
*buffer_info
, *next_buffer
;
3972 unsigned long flags
;
3976 int cleaned_count
= 0;
3977 bool cleaned
= false;
3978 unsigned int total_rx_bytes
=0, total_rx_packets
=0;
3980 i
= rx_ring
->next_to_clean
;
3981 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
3982 buffer_info
= &rx_ring
->buffer_info
[i
];
3984 while (rx_desc
->status
& E1000_RXD_STAT_DD
) {
3985 struct sk_buff
*skb
;
3988 if (*work_done
>= work_to_do
)
3992 status
= rx_desc
->status
;
3993 skb
= buffer_info
->skb
;
3994 buffer_info
->skb
= NULL
;
3996 prefetch(skb
->data
- NET_IP_ALIGN
);
3998 if (++i
== rx_ring
->count
) i
= 0;
3999 next_rxd
= E1000_RX_DESC(*rx_ring
, i
);
4002 next_buffer
= &rx_ring
->buffer_info
[i
];
4006 pci_unmap_single(pdev
,
4008 buffer_info
->length
,
4009 PCI_DMA_FROMDEVICE
);
4011 length
= le16_to_cpu(rx_desc
->length
);
4013 if (unlikely(!(status
& E1000_RXD_STAT_EOP
))) {
4014 /* All receives must fit into a single buffer */
4015 E1000_DBG("%s: Receive packet consumed multiple"
4016 " buffers\n", netdev
->name
);
4018 buffer_info
->skb
= skb
;
4022 if (unlikely(rx_desc
->errors
& E1000_RXD_ERR_FRAME_ERR_MASK
)) {
4023 last_byte
= *(skb
->data
+ length
- 1);
4024 if (TBI_ACCEPT(hw
, status
, rx_desc
->errors
, length
,
4026 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4027 e1000_tbi_adjust_stats(hw
, &adapter
->stats
,
4029 spin_unlock_irqrestore(&adapter
->stats_lock
,
4034 buffer_info
->skb
= skb
;
4039 /* adjust length to remove Ethernet CRC, this must be
4040 * done after the TBI_ACCEPT workaround above */
4043 /* probably a little skewed due to removing CRC */
4044 total_rx_bytes
+= length
;
4047 /* code added for copybreak, this should improve
4048 * performance for small packets with large amounts
4049 * of reassembly being done in the stack */
4050 if (length
< copybreak
) {
4051 struct sk_buff
*new_skb
=
4052 netdev_alloc_skb(netdev
, length
+ NET_IP_ALIGN
);
4054 skb_reserve(new_skb
, NET_IP_ALIGN
);
4055 skb_copy_to_linear_data_offset(new_skb
,
4061 /* save the skb in buffer_info as good */
4062 buffer_info
->skb
= skb
;
4065 /* else just continue with the old one */
4067 /* end copybreak code */
4068 skb_put(skb
, length
);
4070 /* Receive Checksum Offload */
4071 e1000_rx_checksum(adapter
,
4073 ((u32
)(rx_desc
->errors
) << 24),
4074 le16_to_cpu(rx_desc
->csum
), skb
);
4076 skb
->protocol
= eth_type_trans(skb
, netdev
);
4078 if (unlikely(adapter
->vlgrp
&&
4079 (status
& E1000_RXD_STAT_VP
))) {
4080 vlan_hwaccel_receive_skb(skb
, adapter
->vlgrp
,
4081 le16_to_cpu(rx_desc
->special
));
4083 netif_receive_skb(skb
);
4087 rx_desc
->status
= 0;
4089 /* return some buffers to hardware, one at a time is too slow */
4090 if (unlikely(cleaned_count
>= E1000_RX_BUFFER_WRITE
)) {
4091 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
4095 /* use prefetched values */
4097 buffer_info
= next_buffer
;
4099 rx_ring
->next_to_clean
= i
;
4101 cleaned_count
= E1000_DESC_UNUSED(rx_ring
);
4103 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
4105 adapter
->total_rx_packets
+= total_rx_packets
;
4106 adapter
->total_rx_bytes
+= total_rx_bytes
;
4107 adapter
->net_stats
.rx_bytes
+= total_rx_bytes
;
4108 adapter
->net_stats
.rx_packets
+= total_rx_packets
;
4113 * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4114 * @adapter: address of board private structure
4117 static void e1000_alloc_rx_buffers(struct e1000_adapter
*adapter
,
4118 struct e1000_rx_ring
*rx_ring
,
4121 struct e1000_hw
*hw
= &adapter
->hw
;
4122 struct net_device
*netdev
= adapter
->netdev
;
4123 struct pci_dev
*pdev
= adapter
->pdev
;
4124 struct e1000_rx_desc
*rx_desc
;
4125 struct e1000_buffer
*buffer_info
;
4126 struct sk_buff
*skb
;
4128 unsigned int bufsz
= adapter
->rx_buffer_len
+ NET_IP_ALIGN
;
4130 i
= rx_ring
->next_to_use
;
4131 buffer_info
= &rx_ring
->buffer_info
[i
];
4133 while (cleaned_count
--) {
4134 skb
= buffer_info
->skb
;
4140 skb
= netdev_alloc_skb(netdev
, bufsz
);
4141 if (unlikely(!skb
)) {
4142 /* Better luck next round */
4143 adapter
->alloc_rx_buff_failed
++;
4147 /* Fix for errata 23, can't cross 64kB boundary */
4148 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4149 struct sk_buff
*oldskb
= skb
;
4150 DPRINTK(RX_ERR
, ERR
, "skb align check failed: %u bytes "
4151 "at %p\n", bufsz
, skb
->data
);
4152 /* Try again, without freeing the previous */
4153 skb
= netdev_alloc_skb(netdev
, bufsz
);
4154 /* Failed allocation, critical failure */
4156 dev_kfree_skb(oldskb
);
4160 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4163 dev_kfree_skb(oldskb
);
4164 break; /* while !buffer_info->skb */
4167 /* Use new allocation */
4168 dev_kfree_skb(oldskb
);
4170 /* Make buffer alignment 2 beyond a 16 byte boundary
4171 * this will result in a 16 byte aligned IP header after
4172 * the 14 byte MAC header is removed
4174 skb_reserve(skb
, NET_IP_ALIGN
);
4176 buffer_info
->skb
= skb
;
4177 buffer_info
->length
= adapter
->rx_buffer_len
;
4179 buffer_info
->dma
= pci_map_single(pdev
,
4181 adapter
->rx_buffer_len
,
4182 PCI_DMA_FROMDEVICE
);
4184 /* Fix for errata 23, can't cross 64kB boundary */
4185 if (!e1000_check_64k_bound(adapter
,
4186 (void *)(unsigned long)buffer_info
->dma
,
4187 adapter
->rx_buffer_len
)) {
4188 DPRINTK(RX_ERR
, ERR
,
4189 "dma align check failed: %u bytes at %p\n",
4190 adapter
->rx_buffer_len
,
4191 (void *)(unsigned long)buffer_info
->dma
);
4193 buffer_info
->skb
= NULL
;
4195 pci_unmap_single(pdev
, buffer_info
->dma
,
4196 adapter
->rx_buffer_len
,
4197 PCI_DMA_FROMDEVICE
);
4199 break; /* while !buffer_info->skb */
4201 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
4202 rx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
4204 if (unlikely(++i
== rx_ring
->count
))
4206 buffer_info
= &rx_ring
->buffer_info
[i
];
4209 if (likely(rx_ring
->next_to_use
!= i
)) {
4210 rx_ring
->next_to_use
= i
;
4211 if (unlikely(i
-- == 0))
4212 i
= (rx_ring
->count
- 1);
4214 /* Force memory writes to complete before letting h/w
4215 * know there are new descriptors to fetch. (Only
4216 * applicable for weak-ordered memory model archs,
4217 * such as IA-64). */
4219 writel(i
, hw
->hw_addr
+ rx_ring
->rdt
);
4224 * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4228 static void e1000_smartspeed(struct e1000_adapter
*adapter
)
4230 struct e1000_hw
*hw
= &adapter
->hw
;
4234 if ((hw
->phy_type
!= e1000_phy_igp
) || !hw
->autoneg
||
4235 !(hw
->autoneg_advertised
& ADVERTISE_1000_FULL
))
4238 if (adapter
->smartspeed
== 0) {
4239 /* If Master/Slave config fault is asserted twice,
4240 * we assume back-to-back */
4241 e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_status
);
4242 if (!(phy_status
& SR_1000T_MS_CONFIG_FAULT
)) return;
4243 e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_status
);
4244 if (!(phy_status
& SR_1000T_MS_CONFIG_FAULT
)) return;
4245 e1000_read_phy_reg(hw
, PHY_1000T_CTRL
, &phy_ctrl
);
4246 if (phy_ctrl
& CR_1000T_MS_ENABLE
) {
4247 phy_ctrl
&= ~CR_1000T_MS_ENABLE
;
4248 e1000_write_phy_reg(hw
, PHY_1000T_CTRL
,
4250 adapter
->smartspeed
++;
4251 if (!e1000_phy_setup_autoneg(hw
) &&
4252 !e1000_read_phy_reg(hw
, PHY_CTRL
,
4254 phy_ctrl
|= (MII_CR_AUTO_NEG_EN
|
4255 MII_CR_RESTART_AUTO_NEG
);
4256 e1000_write_phy_reg(hw
, PHY_CTRL
,
4261 } else if (adapter
->smartspeed
== E1000_SMARTSPEED_DOWNSHIFT
) {
4262 /* If still no link, perhaps using 2/3 pair cable */
4263 e1000_read_phy_reg(hw
, PHY_1000T_CTRL
, &phy_ctrl
);
4264 phy_ctrl
|= CR_1000T_MS_ENABLE
;
4265 e1000_write_phy_reg(hw
, PHY_1000T_CTRL
, phy_ctrl
);
4266 if (!e1000_phy_setup_autoneg(hw
) &&
4267 !e1000_read_phy_reg(hw
, PHY_CTRL
, &phy_ctrl
)) {
4268 phy_ctrl
|= (MII_CR_AUTO_NEG_EN
|
4269 MII_CR_RESTART_AUTO_NEG
);
4270 e1000_write_phy_reg(hw
, PHY_CTRL
, phy_ctrl
);
4273 /* Restart process after E1000_SMARTSPEED_MAX iterations */
4274 if (adapter
->smartspeed
++ == E1000_SMARTSPEED_MAX
)
4275 adapter
->smartspeed
= 0;
4285 static int e1000_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
4291 return e1000_mii_ioctl(netdev
, ifr
, cmd
);
4304 static int e1000_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
,
4307 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4308 struct e1000_hw
*hw
= &adapter
->hw
;
4309 struct mii_ioctl_data
*data
= if_mii(ifr
);
4313 unsigned long flags
;
4315 if (hw
->media_type
!= e1000_media_type_copper
)
4320 data
->phy_id
= hw
->phy_addr
;
4323 if (!capable(CAP_NET_ADMIN
))
4325 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4326 if (e1000_read_phy_reg(hw
, data
->reg_num
& 0x1F,
4328 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4331 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4334 if (!capable(CAP_NET_ADMIN
))
4336 if (data
->reg_num
& ~(0x1F))
4338 mii_reg
= data
->val_in
;
4339 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4340 if (e1000_write_phy_reg(hw
, data
->reg_num
,
4342 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4345 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4346 if (hw
->media_type
== e1000_media_type_copper
) {
4347 switch (data
->reg_num
) {
4349 if (mii_reg
& MII_CR_POWER_DOWN
)
4351 if (mii_reg
& MII_CR_AUTO_NEG_EN
) {
4353 hw
->autoneg_advertised
= 0x2F;
4356 spddplx
= SPEED_1000
;
4357 else if (mii_reg
& 0x2000)
4358 spddplx
= SPEED_100
;
4361 spddplx
+= (mii_reg
& 0x100)
4364 retval
= e1000_set_spd_dplx(adapter
,
4369 if (netif_running(adapter
->netdev
))
4370 e1000_reinit_locked(adapter
);
4372 e1000_reset(adapter
);
4374 case M88E1000_PHY_SPEC_CTRL
:
4375 case M88E1000_EXT_PHY_SPEC_CTRL
:
4376 if (e1000_phy_reset(hw
))
4381 switch (data
->reg_num
) {
4383 if (mii_reg
& MII_CR_POWER_DOWN
)
4385 if (netif_running(adapter
->netdev
))
4386 e1000_reinit_locked(adapter
);
4388 e1000_reset(adapter
);
4396 return E1000_SUCCESS
;
4399 void e1000_pci_set_mwi(struct e1000_hw
*hw
)
4401 struct e1000_adapter
*adapter
= hw
->back
;
4402 int ret_val
= pci_set_mwi(adapter
->pdev
);
4405 DPRINTK(PROBE
, ERR
, "Error in setting MWI\n");
4408 void e1000_pci_clear_mwi(struct e1000_hw
*hw
)
4410 struct e1000_adapter
*adapter
= hw
->back
;
4412 pci_clear_mwi(adapter
->pdev
);
4415 int e1000_pcix_get_mmrbc(struct e1000_hw
*hw
)
4417 struct e1000_adapter
*adapter
= hw
->back
;
4418 return pcix_get_mmrbc(adapter
->pdev
);
4421 void e1000_pcix_set_mmrbc(struct e1000_hw
*hw
, int mmrbc
)
4423 struct e1000_adapter
*adapter
= hw
->back
;
4424 pcix_set_mmrbc(adapter
->pdev
, mmrbc
);
4427 s32
e1000_read_pcie_cap_reg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
4429 struct e1000_adapter
*adapter
= hw
->back
;
4432 cap_offset
= pci_find_capability(adapter
->pdev
, PCI_CAP_ID_EXP
);
4434 return -E1000_ERR_CONFIG
;
4436 pci_read_config_word(adapter
->pdev
, cap_offset
+ reg
, value
);
4438 return E1000_SUCCESS
;
4441 void e1000_io_write(struct e1000_hw
*hw
, unsigned long port
, u32 value
)
4446 static void e1000_vlan_rx_register(struct net_device
*netdev
,
4447 struct vlan_group
*grp
)
4449 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4450 struct e1000_hw
*hw
= &adapter
->hw
;
4453 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4454 e1000_irq_disable(adapter
);
4455 adapter
->vlgrp
= grp
;
4458 /* enable VLAN tag insert/strip */
4460 ctrl
|= E1000_CTRL_VME
;
4463 if (adapter
->hw
.mac_type
!= e1000_ich8lan
) {
4464 /* enable VLAN receive filtering */
4466 rctl
&= ~E1000_RCTL_CFIEN
;
4468 e1000_update_mng_vlan(adapter
);
4471 /* disable VLAN tag insert/strip */
4473 ctrl
&= ~E1000_CTRL_VME
;
4476 if (adapter
->hw
.mac_type
!= e1000_ich8lan
) {
4477 if (adapter
->mng_vlan_id
!=
4478 (u16
)E1000_MNG_VLAN_NONE
) {
4479 e1000_vlan_rx_kill_vid(netdev
,
4480 adapter
->mng_vlan_id
);
4481 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
4486 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4487 e1000_irq_enable(adapter
);
4490 static void e1000_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
)
4492 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4493 struct e1000_hw
*hw
= &adapter
->hw
;
4496 if ((hw
->mng_cookie
.status
&
4497 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
4498 (vid
== adapter
->mng_vlan_id
))
4500 /* add VID to filter table */
4501 index
= (vid
>> 5) & 0x7F;
4502 vfta
= E1000_READ_REG_ARRAY(hw
, VFTA
, index
);
4503 vfta
|= (1 << (vid
& 0x1F));
4504 e1000_write_vfta(hw
, index
, vfta
);
4507 static void e1000_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
)
4509 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4510 struct e1000_hw
*hw
= &adapter
->hw
;
4513 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4514 e1000_irq_disable(adapter
);
4515 vlan_group_set_device(adapter
->vlgrp
, vid
, NULL
);
4516 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4517 e1000_irq_enable(adapter
);
4519 if ((hw
->mng_cookie
.status
&
4520 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
4521 (vid
== adapter
->mng_vlan_id
)) {
4522 /* release control to f/w */
4523 e1000_release_hw_control(adapter
);
4527 /* remove VID from filter table */
4528 index
= (vid
>> 5) & 0x7F;
4529 vfta
= E1000_READ_REG_ARRAY(hw
, VFTA
, index
);
4530 vfta
&= ~(1 << (vid
& 0x1F));
4531 e1000_write_vfta(hw
, index
, vfta
);
4534 static void e1000_restore_vlan(struct e1000_adapter
*adapter
)
4536 e1000_vlan_rx_register(adapter
->netdev
, adapter
->vlgrp
);
4538 if (adapter
->vlgrp
) {
4540 for (vid
= 0; vid
< VLAN_GROUP_ARRAY_LEN
; vid
++) {
4541 if (!vlan_group_get_device(adapter
->vlgrp
, vid
))
4543 e1000_vlan_rx_add_vid(adapter
->netdev
, vid
);
4548 int e1000_set_spd_dplx(struct e1000_adapter
*adapter
, u16 spddplx
)
4550 struct e1000_hw
*hw
= &adapter
->hw
;
4554 /* Fiber NICs only allow 1000 gbps Full duplex */
4555 if ((hw
->media_type
== e1000_media_type_fiber
) &&
4556 spddplx
!= (SPEED_1000
+ DUPLEX_FULL
)) {
4557 DPRINTK(PROBE
, ERR
, "Unsupported Speed/Duplex configuration\n");
4562 case SPEED_10
+ DUPLEX_HALF
:
4563 hw
->forced_speed_duplex
= e1000_10_half
;
4565 case SPEED_10
+ DUPLEX_FULL
:
4566 hw
->forced_speed_duplex
= e1000_10_full
;
4568 case SPEED_100
+ DUPLEX_HALF
:
4569 hw
->forced_speed_duplex
= e1000_100_half
;
4571 case SPEED_100
+ DUPLEX_FULL
:
4572 hw
->forced_speed_duplex
= e1000_100_full
;
4574 case SPEED_1000
+ DUPLEX_FULL
:
4576 hw
->autoneg_advertised
= ADVERTISE_1000_FULL
;
4578 case SPEED_1000
+ DUPLEX_HALF
: /* not supported */
4580 DPRINTK(PROBE
, ERR
, "Unsupported Speed/Duplex configuration\n");
4586 static int e1000_suspend(struct pci_dev
*pdev
, pm_message_t state
)
4588 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4589 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4590 struct e1000_hw
*hw
= &adapter
->hw
;
4591 u32 ctrl
, ctrl_ext
, rctl
, status
;
4592 u32 wufc
= adapter
->wol
;
4597 netif_device_detach(netdev
);
4599 if (netif_running(netdev
)) {
4600 WARN_ON(test_bit(__E1000_RESETTING
, &adapter
->flags
));
4601 e1000_down(adapter
);
4605 retval
= pci_save_state(pdev
);
4610 status
= er32(STATUS
);
4611 if (status
& E1000_STATUS_LU
)
4612 wufc
&= ~E1000_WUFC_LNKC
;
4615 e1000_setup_rctl(adapter
);
4616 e1000_set_rx_mode(netdev
);
4618 /* turn on all-multi mode if wake on multicast is enabled */
4619 if (wufc
& E1000_WUFC_MC
) {
4621 rctl
|= E1000_RCTL_MPE
;
4625 if (hw
->mac_type
>= e1000_82540
) {
4627 /* advertise wake from D3Cold */
4628 #define E1000_CTRL_ADVD3WUC 0x00100000
4629 /* phy power management enable */
4630 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4631 ctrl
|= E1000_CTRL_ADVD3WUC
|
4632 E1000_CTRL_EN_PHY_PWR_MGMT
;
4636 if (hw
->media_type
== e1000_media_type_fiber
||
4637 hw
->media_type
== e1000_media_type_internal_serdes
) {
4638 /* keep the laser running in D3 */
4639 ctrl_ext
= er32(CTRL_EXT
);
4640 ctrl_ext
|= E1000_CTRL_EXT_SDP7_DATA
;
4641 ew32(CTRL_EXT
, ctrl_ext
);
4644 /* Allow time for pending master requests to run */
4645 e1000_disable_pciex_master(hw
);
4647 ew32(WUC
, E1000_WUC_PME_EN
);
4649 pci_enable_wake(pdev
, PCI_D3hot
, 1);
4650 pci_enable_wake(pdev
, PCI_D3cold
, 1);
4654 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4655 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4658 e1000_release_manageability(adapter
);
4660 /* make sure adapter isn't asleep if manageability is enabled */
4661 if (adapter
->en_mng_pt
) {
4662 pci_enable_wake(pdev
, PCI_D3hot
, 1);
4663 pci_enable_wake(pdev
, PCI_D3cold
, 1);
4666 if (hw
->phy_type
== e1000_phy_igp_3
)
4667 e1000_phy_powerdown_workaround(hw
);
4669 if (netif_running(netdev
))
4670 e1000_free_irq(adapter
);
4672 /* Release control of h/w to f/w. If f/w is AMT enabled, this
4673 * would have already happened in close and is redundant. */
4674 e1000_release_hw_control(adapter
);
4676 pci_disable_device(pdev
);
4678 pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
4684 static int e1000_resume(struct pci_dev
*pdev
)
4686 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4687 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4688 struct e1000_hw
*hw
= &adapter
->hw
;
4691 pci_set_power_state(pdev
, PCI_D0
);
4692 pci_restore_state(pdev
);
4694 if (adapter
->need_ioport
)
4695 err
= pci_enable_device(pdev
);
4697 err
= pci_enable_device_mem(pdev
);
4699 printk(KERN_ERR
"e1000: Cannot enable PCI device from suspend\n");
4702 pci_set_master(pdev
);
4704 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4705 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4707 if (netif_running(netdev
)) {
4708 err
= e1000_request_irq(adapter
);
4713 e1000_power_up_phy(adapter
);
4714 e1000_reset(adapter
);
4717 e1000_init_manageability(adapter
);
4719 if (netif_running(netdev
))
4722 netif_device_attach(netdev
);
4724 /* If the controller is 82573 and f/w is AMT, do not set
4725 * DRV_LOAD until the interface is up. For all other cases,
4726 * let the f/w know that the h/w is now under the control
4728 if (hw
->mac_type
!= e1000_82573
||
4729 !e1000_check_mng_mode(hw
))
4730 e1000_get_hw_control(adapter
);
4736 static void e1000_shutdown(struct pci_dev
*pdev
)
4738 e1000_suspend(pdev
, PMSG_SUSPEND
);
4741 #ifdef CONFIG_NET_POLL_CONTROLLER
4743 * Polling 'interrupt' - used by things like netconsole to send skbs
4744 * without having to re-enable interrupts. It's not called while
4745 * the interrupt routine is executing.
4747 static void e1000_netpoll(struct net_device
*netdev
)
4749 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4751 disable_irq(adapter
->pdev
->irq
);
4752 e1000_intr(adapter
->pdev
->irq
, netdev
);
4753 enable_irq(adapter
->pdev
->irq
);
4758 * e1000_io_error_detected - called when PCI error is detected
4759 * @pdev: Pointer to PCI device
4760 * @state: The current pci conneection state
4762 * This function is called after a PCI bus error affecting
4763 * this device has been detected.
4765 static pci_ers_result_t
e1000_io_error_detected(struct pci_dev
*pdev
,
4766 pci_channel_state_t state
)
4768 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4769 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4771 netif_device_detach(netdev
);
4773 if (netif_running(netdev
))
4774 e1000_down(adapter
);
4775 pci_disable_device(pdev
);
4777 /* Request a slot slot reset. */
4778 return PCI_ERS_RESULT_NEED_RESET
;
4782 * e1000_io_slot_reset - called after the pci bus has been reset.
4783 * @pdev: Pointer to PCI device
4785 * Restart the card from scratch, as if from a cold-boot. Implementation
4786 * resembles the first-half of the e1000_resume routine.
4788 static pci_ers_result_t
e1000_io_slot_reset(struct pci_dev
*pdev
)
4790 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4791 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4792 struct e1000_hw
*hw
= &adapter
->hw
;
4795 if (adapter
->need_ioport
)
4796 err
= pci_enable_device(pdev
);
4798 err
= pci_enable_device_mem(pdev
);
4800 printk(KERN_ERR
"e1000: Cannot re-enable PCI device after reset.\n");
4801 return PCI_ERS_RESULT_DISCONNECT
;
4803 pci_set_master(pdev
);
4805 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4806 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4808 e1000_reset(adapter
);
4811 return PCI_ERS_RESULT_RECOVERED
;
4815 * e1000_io_resume - called when traffic can start flowing again.
4816 * @pdev: Pointer to PCI device
4818 * This callback is called when the error recovery driver tells us that
4819 * its OK to resume normal operation. Implementation resembles the
4820 * second-half of the e1000_resume routine.
4822 static void e1000_io_resume(struct pci_dev
*pdev
)
4824 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4825 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4826 struct e1000_hw
*hw
= &adapter
->hw
;
4828 e1000_init_manageability(adapter
);
4830 if (netif_running(netdev
)) {
4831 if (e1000_up(adapter
)) {
4832 printk("e1000: can't bring device back up after reset\n");
4837 netif_device_attach(netdev
);
4839 /* If the controller is 82573 and f/w is AMT, do not set
4840 * DRV_LOAD until the interface is up. For all other cases,
4841 * let the f/w know that the h/w is now under the control
4843 if (hw
->mac_type
!= e1000_82573
||
4844 !e1000_check_mng_mode(hw
))
4845 e1000_get_hw_control(adapter
);