drivers/net/ethernet/8390/Kconfig

   1 #
   2 # 8390 device configuration
   3 #
   4
   5 config NET_VENDOR_8390
   6         bool "National Semi-conductor 8390 devices"
   7         default y
   8         depends on NET_VENDOR_NATSEMI
   9         ---help---
  10           If you have a network (Ethernet) card belonging to this class, say Y.
  11
  12           Note that the answer to this question doesn't directly affect the
  13           kernel: saying N will just cause the configurator to skip all
  14           the questions about Western Digital cards. If you say Y, you will be
  15           asked for your specific card in the following questions.
  16
  17 if NET_VENDOR_8390
  18
  19 config PCMCIA_AXNET
  20         tristate "Asix AX88190 PCMCIA support"
  21         depends on PCMCIA
  22         ---help---
  23           Say Y here if you intend to attach an Asix AX88190-based PCMCIA
  24           (PC-card) Fast Ethernet card to your computer.  These cards are
  25           nearly NE2000 compatible but need a separate driver due to a few
  26           misfeatures.
  27
  28           To compile this driver as a module, choose M here: the module will be
  29           called axnet_cs.  If unsure, say N.
  30
  31 config AX88796
  32         tristate "ASIX AX88796 NE2000 clone support"
  33         depends on (ARM || MIPS || SUPERH)
  34         select CRC32
  35         select PHYLIB
  36         select MDIO_BITBANG
  37         ---help---
  38           AX88796 driver, using platform bus to provide
  39           chip detection and resources
  40
  41 config AX88796_93CX6
  42         bool "ASIX AX88796 external 93CX6 eeprom support"
  43         depends on AX88796
  44         select EEPROM_93CX6
  45         ---help---
  46           Select this if your platform comes with an external 93CX6 eeprom.
  47
  48 config HYDRA
  49         tristate "Hydra support"
  50         depends on ZORRO
  51         select CRC32
  52         ---help---
  53           If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
  54
  55           To compile this driver as a module, choose M here: the module
  56           will be called hydra.
  57
  58 config ARM_ETHERH
  59         tristate "I-cubed EtherH/ANT EtherM support"
  60         depends on ARM && ARCH_ACORN
  61         select CRC32
  62         ---help---
  63           If you have an Acorn system with one of these network cards, you
  64           should say Y to this option if you wish to use it with Linux.
  65
  66 config MAC8390
  67         tristate "Macintosh NS 8390 based ethernet cards"
  68         depends on MAC
  69         select CRC32
  70         ---help---
  71           If you want to include a driver to support Nubus or LC-PDS
  72           Ethernet cards using an NS8390 chipset or its equivalent, say Y.
  73
  74 config MCF8390
  75         tristate "ColdFire NS8390 based Ethernet support"
  76         depends on COLDFIRE
  77         select CRC32
  78         ---help---
  79           This driver is for Ethernet devices using an NS8390-compatible
  80           chipset on many common ColdFire CPU based boards. Many of the older
  81           Freescale dev boards use this, and some other common boards like
  82           some SnapGear routers do as well.
  83
  84           If you have one of these boards and want to use the network interface
  85           on them then choose Y. To compile this driver as a module, choose M
  86           here, the module will be called mcf8390.
  87
  88 config NE2000
  89         tristate "NE2000/NE1000 support"
  90         depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
  91                     ATARI_ETHERNEC)
  92         select CRC32
  93         ---help---
  94           If you have a network (Ethernet) card of this type, say Y here.
  95           Many Ethernet cards without a specific driver are compatible with
  96           the NE2000.
  97
  98           If you have a PCI NE2000 card however, say N here and Y to "PCI
  99           NE2000 and clone support" below.
 100
 101           To compile this driver as a module, choose M here. The module
 102           will be called ne.
 103
 104 config NE2K_PCI
 105         tristate "PCI NE2000 and clones support (see help)"
 106         depends on PCI
 107         select CRC32
 108         ---help---
 109           This driver is for NE2000 compatible PCI cards. It will not work
 110           with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
 111           support" below). If you have a PCI NE2000 network (Ethernet) card,
 112           say Y here.
 113
 114           This driver also works for the following NE2000 clone cards:
 115           RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
 116           NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
 117           Holtek HT80232    Holtek HT80229
 118
 119           To compile this driver as a module, choose M here. The module
 120           will be called ne2k-pci.
 121
 122 config APNE
 123         tristate "PCMCIA NE2000 support"
 124         depends on AMIGA_PCMCIA
 125         select CRC32
 126         ---help---
 127           If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
 128           say N.
 129
 130           To compile this driver as a module, choose M here: the module
 131           will be called apne.
 132
 133 config PCMCIA_PCNET
 134         tristate "NE2000 compatible PCMCIA support"
 135         depends on PCMCIA
 136         select CRC32
 137         ---help---
 138           Say Y here if you intend to attach an NE2000 compatible PCMCIA
 139           (PC-card) Ethernet or Fast Ethernet card to your computer.
 140
 141           To compile this driver as a module, choose M here: the module will be
 142           called pcnet_cs.  If unsure, say N.
 143
 144 config STNIC
 145         tristate "National DP83902AV  support"
 146         depends on SUPERH
 147         select CRC32
 148         ---help---
 149           Support for cards based on the National Semiconductor DP83902AV
 150           ST-NIC Serial Network Interface Controller for Twisted Pair.  This
 151           is a 10Mbit/sec Ethernet controller.  Product overview and specs at
 152           <http://www.national.com/pf/DP/DP83902A.html>.
 153
 154           If unsure, say N.
 155
 156 config ULTRA
 157         tristate "SMC Ultra support"
 158         depends on ISA
 159         select CRC32
 160         ---help---
 161           If you have a network (Ethernet) card of this type, say Y here.
 162
 163           Important: There have been many reports that, with some motherboards
 164           mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
 165           such as some BusLogic models) causes corruption problems with many
 166           operating systems. The Linux smc-ultra driver has a work-around for
 167           this but keep it in mind if you have such a SCSI card and have
 168           problems.
 169
 170           To compile this driver as a module, choose M here. The module
 171           will be called smc-ultra.
 172
 173 config WD80x3
 174         tristate "WD80*3 support"
 175         depends on ISA
 176         select CRC32
 177         ---help---
 178           If you have a network (Ethernet) card of this type, say Y here.
 179
 180           To compile this driver as a module, choose M here. The module
 181           will be called wd.
 182
 183 config ZORRO8390
 184         tristate "Zorro NS8390-based Ethernet support"
 185         depends on ZORRO
 186         select CRC32
 187         ---help---
 188           This driver is for Zorro Ethernet cards using an NS8390-compatible
 189           chipset, like the Village Tronic Ariadne II and the Individual
 190           Computers X-Surf Ethernet cards. If you have such a card, say Y.
 191           Otherwise, say N.
 192
 193           To compile this driver as a module, choose M here: the module
 194           will be called zorro8390.
 195
 196 endif # NET_VENDOR_8390