drivers/net/ethernet/broadcom/Kconfig

   1 #
   2 # Broadcom device configuration
   3 #
   4
   5 config NET_VENDOR_BROADCOM
   6         bool "Broadcom devices"
   7         default y
   8         depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
   9                    SIBYTE_SB1xxx_SOC
  10         ---help---
  11           If you have a network (Ethernet) chipset belonging to this class,
  12           say Y.
  13
  14           Note that the answer to this question does not directly affect
  15           the kernel: saying N will just case the configurator to skip all
  16           the questions regarding AMD chipsets. If you say Y, you will be asked
  17           for your specific chipset/driver in the following questions.
  18
  19 if NET_VENDOR_BROADCOM
  20
  21 config B44
  22         tristate "Broadcom 440x/47xx ethernet support"
  23         depends on SSB_POSSIBLE && HAS_DMA
  24         select SSB
  25         select MII
  26         select PHYLIB
  27         ---help---
  28           If you have a network (Ethernet) controller of this type, say Y
  29           or M here.
  30
  31           To compile this driver as a module, choose M here. The module
  32           will be called b44.
  33
  34 # Auto-select SSB PCI-HOST support, if possible
  35 config B44_PCI_AUTOSELECT
  36         bool
  37         depends on B44 && SSB_PCIHOST_POSSIBLE
  38         select SSB_PCIHOST
  39         default y
  40
  41 # Auto-select SSB PCICORE driver, if possible
  42 config B44_PCICORE_AUTOSELECT
  43         bool
  44         depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
  45         select SSB_DRIVER_PCICORE
  46         default y
  47
  48 config B44_PCI
  49         bool
  50         depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
  51         default y
  52
  53 config BCM63XX_ENET
  54         tristate "Broadcom 63xx internal mac support"
  55         depends on BCM63XX
  56         select MII
  57         select PHYLIB
  58         help
  59           This driver supports the ethernet MACs in the Broadcom 63xx
  60           MIPS chipset family (BCM63XX).
  61
  62 config BCMGENET
  63         tristate "Broadcom GENET internal MAC support"
  64         depends on HAS_IOMEM
  65         select MII
  66         select PHYLIB
  67         select FIXED_PHY
  68         select BCM7XXX_PHY
  69         select MDIO_BCM_UNIMAC
  70         help
  71           This driver supports the built-in Ethernet MACs found in the
  72           Broadcom BCM7xxx Set Top Box family chipset.
  73
  74 config BNX2
  75         tristate "QLogic bnx2 support"
  76         depends on PCI
  77         select CRC32
  78         select FW_LOADER
  79         ---help---
  80           This driver supports QLogic bnx2 gigabit Ethernet cards.
  81
  82           To compile this driver as a module, choose M here: the module
  83           will be called bnx2.  This is recommended.
  84
  85 config CNIC
  86         tristate "QLogic CNIC support"
  87         depends on PCI && (IPV6 || IPV6=n)
  88         select BNX2
  89         select UIO
  90         ---help---
  91           This driver supports offload features of QLogic bnx2 gigabit
  92           Ethernet cards.
  93
  94           To compile this driver as a module, choose M here: the module
  95           will be called cnic.  This is recommended.
  96
  97 config SB1250_MAC
  98         tristate "SB1250 Gigabit Ethernet support"
  99         depends on SIBYTE_SB1xxx_SOC
 100         select PHYLIB
 101         ---help---
 102           This driver supports Gigabit Ethernet interfaces based on the
 103           Broadcom SiByte family of System-On-a-Chip parts.  They include
 104           the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
 105           and BCM1480 chips.
 106
 107           To compile this driver as a module, choose M here: the module
 108           will be called sb1250-mac.
 109
 110 config TIGON3
 111         tristate "Broadcom Tigon3 support"
 112         depends on PCI
 113         select PHYLIB
 114         imply PTP_1588_CLOCK
 115         ---help---
 116           This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
 117
 118           To compile this driver as a module, choose M here: the module
 119           will be called tg3.  This is recommended.
 120
 121 config TIGON3_HWMON
 122         bool "Broadcom Tigon3 HWMON support"
 123         default y
 124         depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
 125         ---help---
 126           Say Y if you want to expose the thermal sensor on Tigon3 devices.
 127
 128 config BNX2X
 129         tristate "Broadcom NetXtremeII 10Gb support"
 130         depends on PCI
 131         imply PTP_1588_CLOCK
 132         select FW_LOADER
 133         select ZLIB_INFLATE
 134         select LIBCRC32C
 135         select MDIO
 136         ---help---
 137           This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
 138           To compile this driver as a module, choose M here: the module
 139           will be called bnx2x.  This is recommended.
 140
 141 config BNX2X_SRIOV
 142         bool "Broadcom 578xx and 57712 SR-IOV support"
 143         depends on BNX2X && PCI_IOV
 144         default y
 145         ---help---
 146           This configuration parameter enables Single Root Input Output
 147           Virtualization support in the 578xx and 57712 products. This
 148           allows for virtual function acceleration in virtual environments.
 149
 150 config BGMAC
 151         tristate
 152         help
 153           This enables the integrated ethernet controller support for many
 154           Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
 155           needs to be enabled to select this.
 156
 157 config BGMAC_BCMA
 158         tristate "Broadcom iProc GBit BCMA support"
 159         depends on BCMA && BCMA_HOST_SOC
 160         depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
 161         select BGMAC
 162         select PHYLIB
 163         select FIXED_PHY
 164         ---help---
 165           This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
 166           They can be found on BCM47xx SoCs and provide gigabit ethernet.
 167           In case of using this driver on BCM4706 it's also requires to enable
 168           BCMA_DRIVER_GMAC_CMN to make it work.
 169
 170 config BGMAC_PLATFORM
 171         tristate "Broadcom iProc GBit platform support"
 172         depends on ARCH_BCM_IPROC || COMPILE_TEST
 173         depends on OF
 174         select BGMAC
 175         select PHYLIB
 176         select FIXED_PHY
 177         default ARCH_BCM_IPROC
 178         ---help---
 179           Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
 180           controller through the generic platform interface
 181
 182 config SYSTEMPORT
 183         tristate "Broadcom SYSTEMPORT internal MAC support"
 184         depends on HAS_IOMEM
 185         depends on NET_DSA || !NET_DSA
 186         select MII
 187         select PHYLIB
 188         select FIXED_PHY
 189         help
 190           This driver supports the built-in Ethernet MACs found in the
 191           Broadcom BCM7xxx Set Top Box family chipset using an internal
 192           Ethernet switch.
 193
 194 config BNXT
 195         tristate "Broadcom NetXtreme-C/E support"
 196         depends on PCI
 197         select FW_LOADER
 198         select LIBCRC32C
 199         select NET_DEVLINK
 200         ---help---
 201           This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
 202           Ethernet cards.  To compile this driver as a module, choose M here:
 203           the module will be called bnxt_en.  This is recommended.
 204
 205 config BNXT_SRIOV
 206         bool "Broadcom NetXtreme-C/E SR-IOV support"
 207         depends on BNXT && PCI_IOV
 208         default y
 209         ---help---
 210           This configuration parameter enables Single Root Input Output
 211           Virtualization support in the NetXtreme-C/E products. This
 212           allows for virtual function acceleration in virtual environments.
 213
 214 config BNXT_FLOWER_OFFLOAD
 215         bool "TC Flower offload support for NetXtreme-C/E"
 216         depends on BNXT
 217         default y
 218         ---help---
 219           This configuration parameter enables TC Flower packet classifier
 220           offload for eswitch.  This option enables SR-IOV switchdev eswitch
 221           offload.
 222
 223 config BNXT_DCB
 224         bool "Data Center Bridging (DCB) Support"
 225         default n
 226         depends on BNXT && DCB
 227         ---help---
 228           Say Y here if you want to use Data Center Bridging (DCB) in the
 229           driver.
 230
 231           If unsure, say N.
 232
 233 config BNXT_HWMON
 234         bool "Broadcom NetXtreme-C/E HWMON support"
 235         default y
 236         depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
 237         ---help---
 238           Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
 239           devices, via the hwmon sysfs interface.
 240
 241 endif # NET_VENDOR_BROADCOM