1 /* bnx2x_main.c: Broadcom Everest network driver.
3 * Copyright (c) 2007-2013 Broadcom Corporation
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation.
9 * Maintained by: Eilon Greenstein <eilong@broadcom.com>
10 * Written by: Eliezer Tamir
11 * Based on code from Michael Chan's bnx2 driver
12 * UDP CSUM errata workaround by Arik Gendelman
13 * Slowpath and fastpath rework by Vladislav Zolotarov
14 * Statistics and Link management by Yitchak Gertner
18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20 #include <linux/module.h>
21 #include <linux/moduleparam.h>
22 #include <linux/kernel.h>
23 #include <linux/device.h> /* for dev_info() */
24 #include <linux/timer.h>
25 #include <linux/errno.h>
26 #include <linux/ioport.h>
27 #include <linux/slab.h>
28 #include <linux/interrupt.h>
29 #include <linux/pci.h>
30 #include <linux/init.h>
31 #include <linux/netdevice.h>
32 #include <linux/etherdevice.h>
33 #include <linux/skbuff.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/bitops.h>
36 #include <linux/irq.h>
37 #include <linux/delay.h>
38 #include <asm/byteorder.h>
39 #include <linux/time.h>
40 #include <linux/ethtool.h>
41 #include <linux/mii.h>
42 #include <linux/if_vlan.h>
46 #include <net/checksum.h>
47 #include <net/ip6_checksum.h>
48 #include <linux/workqueue.h>
49 #include <linux/crc32.h>
50 #include <linux/crc32c.h>
51 #include <linux/prefetch.h>
52 #include <linux/zlib.h>
54 #include <linux/semaphore.h>
55 #include <linux/stringify.h>
56 #include <linux/vmalloc.h>
59 #include "bnx2x_init.h"
60 #include "bnx2x_init_ops.h"
61 #include "bnx2x_cmn.h"
62 #include "bnx2x_vfpf.h"
63 #include "bnx2x_dcb.h"
66 #include <linux/firmware.h>
67 #include "bnx2x_fw_file_hdr.h"
69 #define FW_FILE_VERSION \
70 __stringify(BCM_5710_FW_MAJOR_VERSION) "." \
71 __stringify(BCM_5710_FW_MINOR_VERSION) "." \
72 __stringify(BCM_5710_FW_REVISION_VERSION) "." \
73 __stringify(BCM_5710_FW_ENGINEERING_VERSION)
74 #define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw"
75 #define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw"
76 #define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
78 /* Time in jiffies before concluding the transmitter is hung */
79 #define TX_TIMEOUT (5*HZ)
81 static char version
[] =
82 "Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver "
83 DRV_MODULE_NAME
" " DRV_MODULE_VERSION
" (" DRV_MODULE_RELDATE
")\n";
85 MODULE_AUTHOR("Eliezer Tamir");
86 MODULE_DESCRIPTION("Broadcom NetXtreme II "
87 "BCM57710/57711/57711E/"
88 "57712/57712_MF/57800/57800_MF/57810/57810_MF/"
89 "57840/57840_MF Driver");
90 MODULE_LICENSE("GPL");
91 MODULE_VERSION(DRV_MODULE_VERSION
);
92 MODULE_FIRMWARE(FW_FILE_NAME_E1
);
93 MODULE_FIRMWARE(FW_FILE_NAME_E1H
);
94 MODULE_FIRMWARE(FW_FILE_NAME_E2
);
97 module_param(num_queues
, int, 0);
98 MODULE_PARM_DESC(num_queues
,
99 " Set number of queues (default is as a number of CPUs)");
101 static int disable_tpa
;
102 module_param(disable_tpa
, int, 0);
103 MODULE_PARM_DESC(disable_tpa
, " Disable the TPA (LRO) feature");
106 module_param(int_mode
, int, 0);
107 MODULE_PARM_DESC(int_mode
, " Force interrupt mode other than MSI-X "
110 static int dropless_fc
;
111 module_param(dropless_fc
, int, 0);
112 MODULE_PARM_DESC(dropless_fc
, " Pause on exhausted host ring");
114 static int mrrs
= -1;
115 module_param(mrrs
, int, 0);
116 MODULE_PARM_DESC(mrrs
, " Force Max Read Req Size (0..3) (for debug)");
119 module_param(debug
, int, 0);
120 MODULE_PARM_DESC(debug
, " Default debug msglevel");
122 struct workqueue_struct
*bnx2x_wq
;
124 struct bnx2x_mac_vals
{
135 enum bnx2x_board_type
{
159 /* indexed by board_type, above */
163 [BCM57710
] = { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" },
164 [BCM57711
] = { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" },
165 [BCM57711E
] = { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" },
166 [BCM57712
] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" },
167 [BCM57712_MF
] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" },
168 [BCM57712_VF
] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" },
169 [BCM57800
] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" },
170 [BCM57800_MF
] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" },
171 [BCM57800_VF
] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" },
172 [BCM57810
] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
173 [BCM57810_MF
] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
174 [BCM57810_VF
] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" },
175 [BCM57840_4_10
] = { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" },
176 [BCM57840_2_20
] = { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" },
177 [BCM57840_MF
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
178 [BCM57840_VF
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" },
179 [BCM57811
] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" },
180 [BCM57811_MF
] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" },
181 [BCM57840_O
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
182 [BCM57840_MFO
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
183 [BCM57811_VF
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }
186 #ifndef PCI_DEVICE_ID_NX2_57710
187 #define PCI_DEVICE_ID_NX2_57710 CHIP_NUM_57710
189 #ifndef PCI_DEVICE_ID_NX2_57711
190 #define PCI_DEVICE_ID_NX2_57711 CHIP_NUM_57711
192 #ifndef PCI_DEVICE_ID_NX2_57711E
193 #define PCI_DEVICE_ID_NX2_57711E CHIP_NUM_57711E
195 #ifndef PCI_DEVICE_ID_NX2_57712
196 #define PCI_DEVICE_ID_NX2_57712 CHIP_NUM_57712
198 #ifndef PCI_DEVICE_ID_NX2_57712_MF
199 #define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF
201 #ifndef PCI_DEVICE_ID_NX2_57712_VF
202 #define PCI_DEVICE_ID_NX2_57712_VF CHIP_NUM_57712_VF
204 #ifndef PCI_DEVICE_ID_NX2_57800
205 #define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800
207 #ifndef PCI_DEVICE_ID_NX2_57800_MF
208 #define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF
210 #ifndef PCI_DEVICE_ID_NX2_57800_VF
211 #define PCI_DEVICE_ID_NX2_57800_VF CHIP_NUM_57800_VF
213 #ifndef PCI_DEVICE_ID_NX2_57810
214 #define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810
216 #ifndef PCI_DEVICE_ID_NX2_57810_MF
217 #define PCI_DEVICE_ID_NX2_57810_MF CHIP_NUM_57810_MF
219 #ifndef PCI_DEVICE_ID_NX2_57840_O
220 #define PCI_DEVICE_ID_NX2_57840_O CHIP_NUM_57840_OBSOLETE
222 #ifndef PCI_DEVICE_ID_NX2_57810_VF
223 #define PCI_DEVICE_ID_NX2_57810_VF CHIP_NUM_57810_VF
225 #ifndef PCI_DEVICE_ID_NX2_57840_4_10
226 #define PCI_DEVICE_ID_NX2_57840_4_10 CHIP_NUM_57840_4_10
228 #ifndef PCI_DEVICE_ID_NX2_57840_2_20
229 #define PCI_DEVICE_ID_NX2_57840_2_20 CHIP_NUM_57840_2_20
231 #ifndef PCI_DEVICE_ID_NX2_57840_MFO
232 #define PCI_DEVICE_ID_NX2_57840_MFO CHIP_NUM_57840_MF_OBSOLETE
234 #ifndef PCI_DEVICE_ID_NX2_57840_MF
235 #define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF
237 #ifndef PCI_DEVICE_ID_NX2_57840_VF
238 #define PCI_DEVICE_ID_NX2_57840_VF CHIP_NUM_57840_VF
240 #ifndef PCI_DEVICE_ID_NX2_57811
241 #define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811
243 #ifndef PCI_DEVICE_ID_NX2_57811_MF
244 #define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF
246 #ifndef PCI_DEVICE_ID_NX2_57811_VF
247 #define PCI_DEVICE_ID_NX2_57811_VF CHIP_NUM_57811_VF
250 static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl
) = {
251 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57710
), BCM57710
},
252 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57711
), BCM57711
},
253 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57711E
), BCM57711E
},
254 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57712
), BCM57712
},
255 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57712_MF
), BCM57712_MF
},
256 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57712_VF
), BCM57712_VF
},
257 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57800
), BCM57800
},
258 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57800_MF
), BCM57800_MF
},
259 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57800_VF
), BCM57800_VF
},
260 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57810
), BCM57810
},
261 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57810_MF
), BCM57810_MF
},
262 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_O
), BCM57840_O
},
263 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_4_10
), BCM57840_4_10
},
264 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_2_20
), BCM57840_2_20
},
265 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57810_VF
), BCM57810_VF
},
266 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_MFO
), BCM57840_MFO
},
267 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_MF
), BCM57840_MF
},
268 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_VF
), BCM57840_VF
},
269 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57811
), BCM57811
},
270 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57811_MF
), BCM57811_MF
},
271 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57811_VF
), BCM57811_VF
},
275 MODULE_DEVICE_TABLE(pci
, bnx2x_pci_tbl
);
277 /* Global resources for unloading a previously loaded device */
278 #define BNX2X_PREV_WAIT_NEEDED 1
279 static DEFINE_SEMAPHORE(bnx2x_prev_sem
);
280 static LIST_HEAD(bnx2x_prev_list
);
281 /****************************************************************************
282 * General service functions
283 ****************************************************************************/
285 static void __storm_memset_dma_mapping(struct bnx2x
*bp
,
286 u32 addr
, dma_addr_t mapping
)
288 REG_WR(bp
, addr
, U64_LO(mapping
));
289 REG_WR(bp
, addr
+ 4, U64_HI(mapping
));
292 static void storm_memset_spq_addr(struct bnx2x
*bp
,
293 dma_addr_t mapping
, u16 abs_fid
)
295 u32 addr
= XSEM_REG_FAST_MEMORY
+
296 XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid
);
298 __storm_memset_dma_mapping(bp
, addr
, mapping
);
301 static void storm_memset_vf_to_pf(struct bnx2x
*bp
, u16 abs_fid
,
304 REG_WR8(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_VF_TO_PF_OFFSET(abs_fid
),
306 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+ CSTORM_VF_TO_PF_OFFSET(abs_fid
),
308 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+ TSTORM_VF_TO_PF_OFFSET(abs_fid
),
310 REG_WR8(bp
, BAR_USTRORM_INTMEM
+ USTORM_VF_TO_PF_OFFSET(abs_fid
),
314 static void storm_memset_func_en(struct bnx2x
*bp
, u16 abs_fid
,
317 REG_WR8(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_FUNC_EN_OFFSET(abs_fid
),
319 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+ CSTORM_FUNC_EN_OFFSET(abs_fid
),
321 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+ TSTORM_FUNC_EN_OFFSET(abs_fid
),
323 REG_WR8(bp
, BAR_USTRORM_INTMEM
+ USTORM_FUNC_EN_OFFSET(abs_fid
),
327 static void storm_memset_eq_data(struct bnx2x
*bp
,
328 struct event_ring_data
*eq_data
,
331 size_t size
= sizeof(struct event_ring_data
);
333 u32 addr
= BAR_CSTRORM_INTMEM
+ CSTORM_EVENT_RING_DATA_OFFSET(pfid
);
335 __storm_memset_struct(bp
, addr
, size
, (u32
*)eq_data
);
338 static void storm_memset_eq_prod(struct bnx2x
*bp
, u16 eq_prod
,
341 u32 addr
= BAR_CSTRORM_INTMEM
+ CSTORM_EVENT_RING_PROD_OFFSET(pfid
);
342 REG_WR16(bp
, addr
, eq_prod
);
346 * locking is done by mcp
348 static void bnx2x_reg_wr_ind(struct bnx2x
*bp
, u32 addr
, u32 val
)
350 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
, addr
);
351 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_DATA
, val
);
352 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
,
353 PCICFG_VENDOR_ID_OFFSET
);
356 static u32
bnx2x_reg_rd_ind(struct bnx2x
*bp
, u32 addr
)
360 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
, addr
);
361 pci_read_config_dword(bp
->pdev
, PCICFG_GRC_DATA
, &val
);
362 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
,
363 PCICFG_VENDOR_ID_OFFSET
);
368 #define DMAE_DP_SRC_GRC "grc src_addr [%08x]"
369 #define DMAE_DP_SRC_PCI "pci src_addr [%x:%08x]"
370 #define DMAE_DP_DST_GRC "grc dst_addr [%08x]"
371 #define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]"
372 #define DMAE_DP_DST_NONE "dst_addr [none]"
374 static void bnx2x_dp_dmae(struct bnx2x
*bp
,
375 struct dmae_command
*dmae
, int msglvl
)
377 u32 src_type
= dmae
->opcode
& DMAE_COMMAND_SRC
;
380 switch (dmae
->opcode
& DMAE_COMMAND_DST
) {
381 case DMAE_CMD_DST_PCI
:
382 if (src_type
== DMAE_CMD_SRC_PCI
)
383 DP(msglvl
, "DMAE: opcode 0x%08x\n"
384 "src [%x:%08x], len [%d*4], dst [%x:%08x]\n"
385 "comp_addr [%x:%08x], comp_val 0x%08x\n",
386 dmae
->opcode
, dmae
->src_addr_hi
, dmae
->src_addr_lo
,
387 dmae
->len
, dmae
->dst_addr_hi
, dmae
->dst_addr_lo
,
388 dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
391 DP(msglvl
, "DMAE: opcode 0x%08x\n"
392 "src [%08x], len [%d*4], dst [%x:%08x]\n"
393 "comp_addr [%x:%08x], comp_val 0x%08x\n",
394 dmae
->opcode
, dmae
->src_addr_lo
>> 2,
395 dmae
->len
, dmae
->dst_addr_hi
, dmae
->dst_addr_lo
,
396 dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
399 case DMAE_CMD_DST_GRC
:
400 if (src_type
== DMAE_CMD_SRC_PCI
)
401 DP(msglvl
, "DMAE: opcode 0x%08x\n"
402 "src [%x:%08x], len [%d*4], dst_addr [%08x]\n"
403 "comp_addr [%x:%08x], comp_val 0x%08x\n",
404 dmae
->opcode
, dmae
->src_addr_hi
, dmae
->src_addr_lo
,
405 dmae
->len
, dmae
->dst_addr_lo
>> 2,
406 dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
409 DP(msglvl
, "DMAE: opcode 0x%08x\n"
410 "src [%08x], len [%d*4], dst [%08x]\n"
411 "comp_addr [%x:%08x], comp_val 0x%08x\n",
412 dmae
->opcode
, dmae
->src_addr_lo
>> 2,
413 dmae
->len
, dmae
->dst_addr_lo
>> 2,
414 dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
418 if (src_type
== DMAE_CMD_SRC_PCI
)
419 DP(msglvl
, "DMAE: opcode 0x%08x\n"
420 "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n"
421 "comp_addr [%x:%08x] comp_val 0x%08x\n",
422 dmae
->opcode
, dmae
->src_addr_hi
, dmae
->src_addr_lo
,
423 dmae
->len
, dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
426 DP(msglvl
, "DMAE: opcode 0x%08x\n"
427 "src_addr [%08x] len [%d * 4] dst_addr [none]\n"
428 "comp_addr [%x:%08x] comp_val 0x%08x\n",
429 dmae
->opcode
, dmae
->src_addr_lo
>> 2,
430 dmae
->len
, dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
435 for (i
= 0; i
< (sizeof(struct dmae_command
)/4); i
++)
436 DP(msglvl
, "DMAE RAW [%02d]: 0x%08x\n",
437 i
, *(((u32
*)dmae
) + i
));
440 /* copy command into DMAE command memory and set DMAE command go */
441 void bnx2x_post_dmae(struct bnx2x
*bp
, struct dmae_command
*dmae
, int idx
)
446 cmd_offset
= (DMAE_REG_CMD_MEM
+ sizeof(struct dmae_command
) * idx
);
447 for (i
= 0; i
< (sizeof(struct dmae_command
)/4); i
++) {
448 REG_WR(bp
, cmd_offset
+ i
*4, *(((u32
*)dmae
) + i
));
450 REG_WR(bp
, dmae_reg_go_c
[idx
], 1);
453 u32
bnx2x_dmae_opcode_add_comp(u32 opcode
, u8 comp_type
)
455 return opcode
| ((comp_type
<< DMAE_COMMAND_C_DST_SHIFT
) |
459 u32
bnx2x_dmae_opcode_clr_src_reset(u32 opcode
)
461 return opcode
& ~DMAE_CMD_SRC_RESET
;
464 u32
bnx2x_dmae_opcode(struct bnx2x
*bp
, u8 src_type
, u8 dst_type
,
465 bool with_comp
, u8 comp_type
)
469 opcode
|= ((src_type
<< DMAE_COMMAND_SRC_SHIFT
) |
470 (dst_type
<< DMAE_COMMAND_DST_SHIFT
));
472 opcode
|= (DMAE_CMD_SRC_RESET
| DMAE_CMD_DST_RESET
);
474 opcode
|= (BP_PORT(bp
) ? DMAE_CMD_PORT_1
: DMAE_CMD_PORT_0
);
475 opcode
|= ((BP_VN(bp
) << DMAE_CMD_E1HVN_SHIFT
) |
476 (BP_VN(bp
) << DMAE_COMMAND_DST_VN_SHIFT
));
477 opcode
|= (DMAE_COM_SET_ERR
<< DMAE_COMMAND_ERR_POLICY_SHIFT
);
480 opcode
|= DMAE_CMD_ENDIANITY_B_DW_SWAP
;
482 opcode
|= DMAE_CMD_ENDIANITY_DW_SWAP
;
485 opcode
= bnx2x_dmae_opcode_add_comp(opcode
, comp_type
);
489 void bnx2x_prep_dmae_with_comp(struct bnx2x
*bp
,
490 struct dmae_command
*dmae
,
491 u8 src_type
, u8 dst_type
)
493 memset(dmae
, 0, sizeof(struct dmae_command
));
496 dmae
->opcode
= bnx2x_dmae_opcode(bp
, src_type
, dst_type
,
497 true, DMAE_COMP_PCI
);
499 /* fill in the completion parameters */
500 dmae
->comp_addr_lo
= U64_LO(bnx2x_sp_mapping(bp
, wb_comp
));
501 dmae
->comp_addr_hi
= U64_HI(bnx2x_sp_mapping(bp
, wb_comp
));
502 dmae
->comp_val
= DMAE_COMP_VAL
;
505 /* issue a dmae command over the init-channel and wait for completion */
506 int bnx2x_issue_dmae_with_comp(struct bnx2x
*bp
, struct dmae_command
*dmae
)
508 u32
*wb_comp
= bnx2x_sp(bp
, wb_comp
);
509 int cnt
= CHIP_REV_IS_SLOW(bp
) ? (400000) : 4000;
512 bnx2x_dp_dmae(bp
, dmae
, BNX2X_MSG_DMAE
);
514 /* Lock the dmae channel. Disable BHs to prevent a dead-lock
515 * as long as this code is called both from syscall context and
516 * from ndo_set_rx_mode() flow that may be called from BH.
518 spin_lock_bh(&bp
->dmae_lock
);
520 /* reset completion */
523 /* post the command on the channel used for initializations */
524 bnx2x_post_dmae(bp
, dmae
, INIT_DMAE_C(bp
));
526 /* wait for completion */
528 while ((*wb_comp
& ~DMAE_PCI_ERR_FLAG
) != DMAE_COMP_VAL
) {
531 (bp
->recovery_state
!= BNX2X_RECOVERY_DONE
&&
532 bp
->recovery_state
!= BNX2X_RECOVERY_NIC_LOADING
)) {
533 BNX2X_ERR("DMAE timeout!\n");
540 if (*wb_comp
& DMAE_PCI_ERR_FLAG
) {
541 BNX2X_ERR("DMAE PCI error!\n");
546 spin_unlock_bh(&bp
->dmae_lock
);
550 void bnx2x_write_dmae(struct bnx2x
*bp
, dma_addr_t dma_addr
, u32 dst_addr
,
554 struct dmae_command dmae
;
556 if (!bp
->dmae_ready
) {
557 u32
*data
= bnx2x_sp(bp
, wb_data
[0]);
560 bnx2x_init_ind_wr(bp
, dst_addr
, data
, len32
);
562 bnx2x_init_str_wr(bp
, dst_addr
, data
, len32
);
566 /* set opcode and fixed command fields */
567 bnx2x_prep_dmae_with_comp(bp
, &dmae
, DMAE_SRC_PCI
, DMAE_DST_GRC
);
569 /* fill in addresses and len */
570 dmae
.src_addr_lo
= U64_LO(dma_addr
);
571 dmae
.src_addr_hi
= U64_HI(dma_addr
);
572 dmae
.dst_addr_lo
= dst_addr
>> 2;
573 dmae
.dst_addr_hi
= 0;
576 /* issue the command and wait for completion */
577 rc
= bnx2x_issue_dmae_with_comp(bp
, &dmae
);
579 BNX2X_ERR("DMAE returned failure %d\n", rc
);
584 void bnx2x_read_dmae(struct bnx2x
*bp
, u32 src_addr
, u32 len32
)
587 struct dmae_command dmae
;
589 if (!bp
->dmae_ready
) {
590 u32
*data
= bnx2x_sp(bp
, wb_data
[0]);
594 for (i
= 0; i
< len32
; i
++)
595 data
[i
] = bnx2x_reg_rd_ind(bp
, src_addr
+ i
*4);
597 for (i
= 0; i
< len32
; i
++)
598 data
[i
] = REG_RD(bp
, src_addr
+ i
*4);
603 /* set opcode and fixed command fields */
604 bnx2x_prep_dmae_with_comp(bp
, &dmae
, DMAE_SRC_GRC
, DMAE_DST_PCI
);
606 /* fill in addresses and len */
607 dmae
.src_addr_lo
= src_addr
>> 2;
608 dmae
.src_addr_hi
= 0;
609 dmae
.dst_addr_lo
= U64_LO(bnx2x_sp_mapping(bp
, wb_data
));
610 dmae
.dst_addr_hi
= U64_HI(bnx2x_sp_mapping(bp
, wb_data
));
613 /* issue the command and wait for completion */
614 rc
= bnx2x_issue_dmae_with_comp(bp
, &dmae
);
616 BNX2X_ERR("DMAE returned failure %d\n", rc
);
621 static void bnx2x_write_dmae_phys_len(struct bnx2x
*bp
, dma_addr_t phys_addr
,
624 int dmae_wr_max
= DMAE_LEN32_WR_MAX(bp
);
627 while (len
> dmae_wr_max
) {
628 bnx2x_write_dmae(bp
, phys_addr
+ offset
,
629 addr
+ offset
, dmae_wr_max
);
630 offset
+= dmae_wr_max
* 4;
634 bnx2x_write_dmae(bp
, phys_addr
+ offset
, addr
+ offset
, len
);
637 static int bnx2x_mc_assert(struct bnx2x
*bp
)
641 u32 row0
, row1
, row2
, row3
;
644 last_idx
= REG_RD8(bp
, BAR_XSTRORM_INTMEM
+
645 XSTORM_ASSERT_LIST_INDEX_OFFSET
);
647 BNX2X_ERR("XSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx
);
649 /* print the asserts */
650 for (i
= 0; i
< STROM_ASSERT_ARRAY_SIZE
; i
++) {
652 row0
= REG_RD(bp
, BAR_XSTRORM_INTMEM
+
653 XSTORM_ASSERT_LIST_OFFSET(i
));
654 row1
= REG_RD(bp
, BAR_XSTRORM_INTMEM
+
655 XSTORM_ASSERT_LIST_OFFSET(i
) + 4);
656 row2
= REG_RD(bp
, BAR_XSTRORM_INTMEM
+
657 XSTORM_ASSERT_LIST_OFFSET(i
) + 8);
658 row3
= REG_RD(bp
, BAR_XSTRORM_INTMEM
+
659 XSTORM_ASSERT_LIST_OFFSET(i
) + 12);
661 if (row0
!= COMMON_ASM_INVALID_ASSERT_OPCODE
) {
662 BNX2X_ERR("XSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
663 i
, row3
, row2
, row1
, row0
);
671 last_idx
= REG_RD8(bp
, BAR_TSTRORM_INTMEM
+
672 TSTORM_ASSERT_LIST_INDEX_OFFSET
);
674 BNX2X_ERR("TSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx
);
676 /* print the asserts */
677 for (i
= 0; i
< STROM_ASSERT_ARRAY_SIZE
; i
++) {
679 row0
= REG_RD(bp
, BAR_TSTRORM_INTMEM
+
680 TSTORM_ASSERT_LIST_OFFSET(i
));
681 row1
= REG_RD(bp
, BAR_TSTRORM_INTMEM
+
682 TSTORM_ASSERT_LIST_OFFSET(i
) + 4);
683 row2
= REG_RD(bp
, BAR_TSTRORM_INTMEM
+
684 TSTORM_ASSERT_LIST_OFFSET(i
) + 8);
685 row3
= REG_RD(bp
, BAR_TSTRORM_INTMEM
+
686 TSTORM_ASSERT_LIST_OFFSET(i
) + 12);
688 if (row0
!= COMMON_ASM_INVALID_ASSERT_OPCODE
) {
689 BNX2X_ERR("TSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
690 i
, row3
, row2
, row1
, row0
);
698 last_idx
= REG_RD8(bp
, BAR_CSTRORM_INTMEM
+
699 CSTORM_ASSERT_LIST_INDEX_OFFSET
);
701 BNX2X_ERR("CSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx
);
703 /* print the asserts */
704 for (i
= 0; i
< STROM_ASSERT_ARRAY_SIZE
; i
++) {
706 row0
= REG_RD(bp
, BAR_CSTRORM_INTMEM
+
707 CSTORM_ASSERT_LIST_OFFSET(i
));
708 row1
= REG_RD(bp
, BAR_CSTRORM_INTMEM
+
709 CSTORM_ASSERT_LIST_OFFSET(i
) + 4);
710 row2
= REG_RD(bp
, BAR_CSTRORM_INTMEM
+
711 CSTORM_ASSERT_LIST_OFFSET(i
) + 8);
712 row3
= REG_RD(bp
, BAR_CSTRORM_INTMEM
+
713 CSTORM_ASSERT_LIST_OFFSET(i
) + 12);
715 if (row0
!= COMMON_ASM_INVALID_ASSERT_OPCODE
) {
716 BNX2X_ERR("CSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
717 i
, row3
, row2
, row1
, row0
);
725 last_idx
= REG_RD8(bp
, BAR_USTRORM_INTMEM
+
726 USTORM_ASSERT_LIST_INDEX_OFFSET
);
728 BNX2X_ERR("USTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx
);
730 /* print the asserts */
731 for (i
= 0; i
< STROM_ASSERT_ARRAY_SIZE
; i
++) {
733 row0
= REG_RD(bp
, BAR_USTRORM_INTMEM
+
734 USTORM_ASSERT_LIST_OFFSET(i
));
735 row1
= REG_RD(bp
, BAR_USTRORM_INTMEM
+
736 USTORM_ASSERT_LIST_OFFSET(i
) + 4);
737 row2
= REG_RD(bp
, BAR_USTRORM_INTMEM
+
738 USTORM_ASSERT_LIST_OFFSET(i
) + 8);
739 row3
= REG_RD(bp
, BAR_USTRORM_INTMEM
+
740 USTORM_ASSERT_LIST_OFFSET(i
) + 12);
742 if (row0
!= COMMON_ASM_INVALID_ASSERT_OPCODE
) {
743 BNX2X_ERR("USTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
744 i
, row3
, row2
, row1
, row0
);
754 void bnx2x_fw_dump_lvl(struct bnx2x
*bp
, const char *lvl
)
760 u32 trace_shmem_base
;
762 BNX2X_ERR("NO MCP - can not dump\n");
765 netdev_printk(lvl
, bp
->dev
, "bc %d.%d.%d\n",
766 (bp
->common
.bc_ver
& 0xff0000) >> 16,
767 (bp
->common
.bc_ver
& 0xff00) >> 8,
768 (bp
->common
.bc_ver
& 0xff));
770 val
= REG_RD(bp
, MCP_REG_MCPR_CPU_PROGRAM_COUNTER
);
771 if (val
== REG_RD(bp
, MCP_REG_MCPR_CPU_PROGRAM_COUNTER
))
772 BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl
, val
);
774 if (BP_PATH(bp
) == 0)
775 trace_shmem_base
= bp
->common
.shmem_base
;
777 trace_shmem_base
= SHMEM2_RD(bp
, other_shmem_base_addr
);
778 addr
= trace_shmem_base
- 0x800;
780 /* validate TRCB signature */
781 mark
= REG_RD(bp
, addr
);
782 if (mark
!= MFW_TRACE_SIGNATURE
) {
783 BNX2X_ERR("Trace buffer signature is missing.");
787 /* read cyclic buffer pointer */
789 mark
= REG_RD(bp
, addr
);
790 mark
= (CHIP_IS_E1x(bp
) ? MCP_REG_MCPR_SCRATCH
: MCP_A_REG_MCPR_SCRATCH
)
791 + ((mark
+ 0x3) & ~0x3) - 0x08000000;
792 printk("%s" "begin fw dump (mark 0x%x)\n", lvl
, mark
);
796 /* dump buffer after the mark */
797 for (offset
= mark
; offset
<= trace_shmem_base
; offset
+= 0x8*4) {
798 for (word
= 0; word
< 8; word
++)
799 data
[word
] = htonl(REG_RD(bp
, offset
+ 4*word
));
801 pr_cont("%s", (char *)data
);
804 /* dump buffer before the mark */
805 for (offset
= addr
+ 4; offset
<= mark
; offset
+= 0x8*4) {
806 for (word
= 0; word
< 8; word
++)
807 data
[word
] = htonl(REG_RD(bp
, offset
+ 4*word
));
809 pr_cont("%s", (char *)data
);
811 printk("%s" "end of fw dump\n", lvl
);
814 static void bnx2x_fw_dump(struct bnx2x
*bp
)
816 bnx2x_fw_dump_lvl(bp
, KERN_ERR
);
819 static void bnx2x_hc_int_disable(struct bnx2x
*bp
)
821 int port
= BP_PORT(bp
);
822 u32 addr
= port
? HC_REG_CONFIG_1
: HC_REG_CONFIG_0
;
823 u32 val
= REG_RD(bp
, addr
);
825 /* in E1 we must use only PCI configuration space to disable
826 * MSI/MSIX capability
827 * It's forbidden to disable IGU_PF_CONF_MSI_MSIX_EN in HC block
829 if (CHIP_IS_E1(bp
)) {
830 /* Since IGU_PF_CONF_MSI_MSIX_EN still always on
831 * Use mask register to prevent from HC sending interrupts
832 * after we exit the function
834 REG_WR(bp
, HC_REG_INT_MASK
+ port
*4, 0);
836 val
&= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
837 HC_CONFIG_0_REG_INT_LINE_EN_0
|
838 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
840 val
&= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
841 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
|
842 HC_CONFIG_0_REG_INT_LINE_EN_0
|
843 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
846 "write %x to HC %d (addr 0x%x)\n",
849 /* flush all outstanding writes */
852 REG_WR(bp
, addr
, val
);
853 if (REG_RD(bp
, addr
) != val
)
854 BNX2X_ERR("BUG! Proper val not read from IGU!\n");
857 static void bnx2x_igu_int_disable(struct bnx2x
*bp
)
859 u32 val
= REG_RD(bp
, IGU_REG_PF_CONFIGURATION
);
861 val
&= ~(IGU_PF_CONF_MSI_MSIX_EN
|
862 IGU_PF_CONF_INT_LINE_EN
|
863 IGU_PF_CONF_ATTN_BIT_EN
);
865 DP(NETIF_MSG_IFDOWN
, "write %x to IGU\n", val
);
867 /* flush all outstanding writes */
870 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, val
);
871 if (REG_RD(bp
, IGU_REG_PF_CONFIGURATION
) != val
)
872 BNX2X_ERR("BUG! Proper val not read from IGU!\n");
875 static void bnx2x_int_disable(struct bnx2x
*bp
)
877 if (bp
->common
.int_block
== INT_BLOCK_HC
)
878 bnx2x_hc_int_disable(bp
);
880 bnx2x_igu_int_disable(bp
);
883 void bnx2x_panic_dump(struct bnx2x
*bp
, bool disable_int
)
887 struct hc_sp_status_block_data sp_sb_data
;
888 int func
= BP_FUNC(bp
);
889 #ifdef BNX2X_STOP_ON_ERROR
890 u16 start
= 0, end
= 0;
894 bnx2x_int_disable(bp
);
896 bp
->stats_state
= STATS_STATE_DISABLED
;
897 bp
->eth_stats
.unrecoverable_error
++;
898 DP(BNX2X_MSG_STATS
, "stats_state - DISABLED\n");
900 BNX2X_ERR("begin crash dump -----------------\n");
904 BNX2X_ERR("def_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x) spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n",
905 bp
->def_idx
, bp
->def_att_idx
, bp
->attn_state
,
906 bp
->spq_prod_idx
, bp
->stats_counter
);
907 BNX2X_ERR("DSB: attn bits(0x%x) ack(0x%x) id(0x%x) idx(0x%x)\n",
908 bp
->def_status_blk
->atten_status_block
.attn_bits
,
909 bp
->def_status_blk
->atten_status_block
.attn_bits_ack
,
910 bp
->def_status_blk
->atten_status_block
.status_block_id
,
911 bp
->def_status_blk
->atten_status_block
.attn_bits_index
);
913 for (i
= 0; i
< HC_SP_SB_MAX_INDICES
; i
++)
915 bp
->def_status_blk
->sp_sb
.index_values
[i
],
916 (i
== HC_SP_SB_MAX_INDICES
- 1) ? ") " : " ");
918 for (i
= 0; i
< sizeof(struct hc_sp_status_block_data
)/sizeof(u32
); i
++)
919 *((u32
*)&sp_sb_data
+ i
) = REG_RD(bp
, BAR_CSTRORM_INTMEM
+
920 CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func
) +
923 pr_cont("igu_sb_id(0x%x) igu_seg_id(0x%x) pf_id(0x%x) vnic_id(0x%x) vf_id(0x%x) vf_valid (0x%x) state(0x%x)\n",
924 sp_sb_data
.igu_sb_id
,
925 sp_sb_data
.igu_seg_id
,
926 sp_sb_data
.p_func
.pf_id
,
927 sp_sb_data
.p_func
.vnic_id
,
928 sp_sb_data
.p_func
.vf_id
,
929 sp_sb_data
.p_func
.vf_valid
,
932 for_each_eth_queue(bp
, i
) {
933 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
935 struct hc_status_block_data_e2 sb_data_e2
;
936 struct hc_status_block_data_e1x sb_data_e1x
;
937 struct hc_status_block_sm
*hc_sm_p
=
939 sb_data_e1x
.common
.state_machine
:
940 sb_data_e2
.common
.state_machine
;
941 struct hc_index_data
*hc_index_p
=
943 sb_data_e1x
.index_data
:
944 sb_data_e2
.index_data
;
947 struct bnx2x_fp_txdata txdata
;
950 BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x) rx_comp_prod(0x%x) rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n",
951 i
, fp
->rx_bd_prod
, fp
->rx_bd_cons
,
953 fp
->rx_comp_cons
, le16_to_cpu(*fp
->rx_cons_sb
));
954 BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x) fp_hc_idx(0x%x)\n",
955 fp
->rx_sge_prod
, fp
->last_max_sge
,
956 le16_to_cpu(fp
->fp_hc_idx
));
959 for_each_cos_in_tx_queue(fp
, cos
)
961 txdata
= *fp
->txdata_ptr
[cos
];
962 BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x) tx_bd_prod(0x%x) tx_bd_cons(0x%x) *tx_cons_sb(0x%x)\n",
963 i
, txdata
.tx_pkt_prod
,
964 txdata
.tx_pkt_cons
, txdata
.tx_bd_prod
,
966 le16_to_cpu(*txdata
.tx_cons_sb
));
969 loop
= CHIP_IS_E1x(bp
) ?
970 HC_SB_MAX_INDICES_E1X
: HC_SB_MAX_INDICES_E2
;
977 BNX2X_ERR(" run indexes (");
978 for (j
= 0; j
< HC_SB_MAX_SM
; j
++)
980 fp
->sb_running_index
[j
],
981 (j
== HC_SB_MAX_SM
- 1) ? ")" : " ");
983 BNX2X_ERR(" indexes (");
984 for (j
= 0; j
< loop
; j
++)
986 fp
->sb_index_values
[j
],
987 (j
== loop
- 1) ? ")" : " ");
989 data_size
= CHIP_IS_E1x(bp
) ?
990 sizeof(struct hc_status_block_data_e1x
) :
991 sizeof(struct hc_status_block_data_e2
);
992 data_size
/= sizeof(u32
);
993 sb_data_p
= CHIP_IS_E1x(bp
) ?
994 (u32
*)&sb_data_e1x
:
996 /* copy sb data in here */
997 for (j
= 0; j
< data_size
; j
++)
998 *(sb_data_p
+ j
) = REG_RD(bp
, BAR_CSTRORM_INTMEM
+
999 CSTORM_STATUS_BLOCK_DATA_OFFSET(fp
->fw_sb_id
) +
1002 if (!CHIP_IS_E1x(bp
)) {
1003 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n",
1004 sb_data_e2
.common
.p_func
.pf_id
,
1005 sb_data_e2
.common
.p_func
.vf_id
,
1006 sb_data_e2
.common
.p_func
.vf_valid
,
1007 sb_data_e2
.common
.p_func
.vnic_id
,
1008 sb_data_e2
.common
.same_igu_sb_1b
,
1009 sb_data_e2
.common
.state
);
1011 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n",
1012 sb_data_e1x
.common
.p_func
.pf_id
,
1013 sb_data_e1x
.common
.p_func
.vf_id
,
1014 sb_data_e1x
.common
.p_func
.vf_valid
,
1015 sb_data_e1x
.common
.p_func
.vnic_id
,
1016 sb_data_e1x
.common
.same_igu_sb_1b
,
1017 sb_data_e1x
.common
.state
);
1021 for (j
= 0; j
< HC_SB_MAX_SM
; j
++) {
1022 pr_cont("SM[%d] __flags (0x%x) igu_sb_id (0x%x) igu_seg_id(0x%x) time_to_expire (0x%x) timer_value(0x%x)\n",
1023 j
, hc_sm_p
[j
].__flags
,
1024 hc_sm_p
[j
].igu_sb_id
,
1025 hc_sm_p
[j
].igu_seg_id
,
1026 hc_sm_p
[j
].time_to_expire
,
1027 hc_sm_p
[j
].timer_value
);
1031 for (j
= 0; j
< loop
; j
++) {
1032 pr_cont("INDEX[%d] flags (0x%x) timeout (0x%x)\n", j
,
1033 hc_index_p
[j
].flags
,
1034 hc_index_p
[j
].timeout
);
1038 #ifdef BNX2X_STOP_ON_ERROR
1041 BNX2X_ERR("eq cons %x prod %x\n", bp
->eq_cons
, bp
->eq_prod
);
1042 for (i
= 0; i
< NUM_EQ_DESC
; i
++) {
1043 u32
*data
= (u32
*)&bp
->eq_ring
[i
].message
.data
;
1045 BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n",
1046 i
, bp
->eq_ring
[i
].message
.opcode
,
1047 bp
->eq_ring
[i
].message
.error
);
1048 BNX2X_ERR("data: %x %x %x\n", data
[0], data
[1], data
[2]);
1053 for_each_valid_rx_queue(bp
, i
) {
1054 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
1056 start
= RX_BD(le16_to_cpu(*fp
->rx_cons_sb
) - 10);
1057 end
= RX_BD(le16_to_cpu(*fp
->rx_cons_sb
) + 503);
1058 for (j
= start
; j
!= end
; j
= RX_BD(j
+ 1)) {
1059 u32
*rx_bd
= (u32
*)&fp
->rx_desc_ring
[j
];
1060 struct sw_rx_bd
*sw_bd
= &fp
->rx_buf_ring
[j
];
1062 BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n",
1063 i
, j
, rx_bd
[1], rx_bd
[0], sw_bd
->data
);
1066 start
= RX_SGE(fp
->rx_sge_prod
);
1067 end
= RX_SGE(fp
->last_max_sge
);
1068 for (j
= start
; j
!= end
; j
= RX_SGE(j
+ 1)) {
1069 u32
*rx_sge
= (u32
*)&fp
->rx_sge_ring
[j
];
1070 struct sw_rx_page
*sw_page
= &fp
->rx_page_ring
[j
];
1072 BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n",
1073 i
, j
, rx_sge
[1], rx_sge
[0], sw_page
->page
);
1076 start
= RCQ_BD(fp
->rx_comp_cons
- 10);
1077 end
= RCQ_BD(fp
->rx_comp_cons
+ 503);
1078 for (j
= start
; j
!= end
; j
= RCQ_BD(j
+ 1)) {
1079 u32
*cqe
= (u32
*)&fp
->rx_comp_ring
[j
];
1081 BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n",
1082 i
, j
, cqe
[0], cqe
[1], cqe
[2], cqe
[3]);
1087 for_each_valid_tx_queue(bp
, i
) {
1088 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
1089 for_each_cos_in_tx_queue(fp
, cos
) {
1090 struct bnx2x_fp_txdata
*txdata
= fp
->txdata_ptr
[cos
];
1092 start
= TX_BD(le16_to_cpu(*txdata
->tx_cons_sb
) - 10);
1093 end
= TX_BD(le16_to_cpu(*txdata
->tx_cons_sb
) + 245);
1094 for (j
= start
; j
!= end
; j
= TX_BD(j
+ 1)) {
1095 struct sw_tx_bd
*sw_bd
=
1096 &txdata
->tx_buf_ring
[j
];
1098 BNX2X_ERR("fp%d: txdata %d, packet[%x]=[%p,%x]\n",
1099 i
, cos
, j
, sw_bd
->skb
,
1103 start
= TX_BD(txdata
->tx_bd_cons
- 10);
1104 end
= TX_BD(txdata
->tx_bd_cons
+ 254);
1105 for (j
= start
; j
!= end
; j
= TX_BD(j
+ 1)) {
1106 u32
*tx_bd
= (u32
*)&txdata
->tx_desc_ring
[j
];
1108 BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]=[%x:%x:%x:%x]\n",
1109 i
, cos
, j
, tx_bd
[0], tx_bd
[1],
1110 tx_bd
[2], tx_bd
[3]);
1116 bnx2x_mc_assert(bp
);
1117 BNX2X_ERR("end crash dump -----------------\n");
1121 * FLR Support for E2
1123 * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW
1126 #define FLR_WAIT_USEC 10000 /* 10 milliseconds */
1127 #define FLR_WAIT_INTERVAL 50 /* usec */
1128 #define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERVAL) /* 200 */
1130 struct pbf_pN_buf_regs
{
1137 struct pbf_pN_cmd_regs
{
1143 static void bnx2x_pbf_pN_buf_flushed(struct bnx2x
*bp
,
1144 struct pbf_pN_buf_regs
*regs
,
1147 u32 init_crd
, crd
, crd_start
, crd_freed
, crd_freed_start
;
1148 u32 cur_cnt
= poll_count
;
1150 crd_freed
= crd_freed_start
= REG_RD(bp
, regs
->crd_freed
);
1151 crd
= crd_start
= REG_RD(bp
, regs
->crd
);
1152 init_crd
= REG_RD(bp
, regs
->init_crd
);
1154 DP(BNX2X_MSG_SP
, "INIT CREDIT[%d] : %x\n", regs
->pN
, init_crd
);
1155 DP(BNX2X_MSG_SP
, "CREDIT[%d] : s:%x\n", regs
->pN
, crd
);
1156 DP(BNX2X_MSG_SP
, "CREDIT_FREED[%d]: s:%x\n", regs
->pN
, crd_freed
);
1158 while ((crd
!= init_crd
) && ((u32
)SUB_S32(crd_freed
, crd_freed_start
) <
1159 (init_crd
- crd_start
))) {
1161 udelay(FLR_WAIT_INTERVAL
);
1162 crd
= REG_RD(bp
, regs
->crd
);
1163 crd_freed
= REG_RD(bp
, regs
->crd_freed
);
1165 DP(BNX2X_MSG_SP
, "PBF tx buffer[%d] timed out\n",
1167 DP(BNX2X_MSG_SP
, "CREDIT[%d] : c:%x\n",
1169 DP(BNX2X_MSG_SP
, "CREDIT_FREED[%d]: c:%x\n",
1170 regs
->pN
, crd_freed
);
1174 DP(BNX2X_MSG_SP
, "Waited %d*%d usec for PBF tx buffer[%d]\n",
1175 poll_count
-cur_cnt
, FLR_WAIT_INTERVAL
, regs
->pN
);
1178 static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x
*bp
,
1179 struct pbf_pN_cmd_regs
*regs
,
1182 u32 occup
, to_free
, freed
, freed_start
;
1183 u32 cur_cnt
= poll_count
;
1185 occup
= to_free
= REG_RD(bp
, regs
->lines_occup
);
1186 freed
= freed_start
= REG_RD(bp
, regs
->lines_freed
);
1188 DP(BNX2X_MSG_SP
, "OCCUPANCY[%d] : s:%x\n", regs
->pN
, occup
);
1189 DP(BNX2X_MSG_SP
, "LINES_FREED[%d] : s:%x\n", regs
->pN
, freed
);
1191 while (occup
&& ((u32
)SUB_S32(freed
, freed_start
) < to_free
)) {
1193 udelay(FLR_WAIT_INTERVAL
);
1194 occup
= REG_RD(bp
, regs
->lines_occup
);
1195 freed
= REG_RD(bp
, regs
->lines_freed
);
1197 DP(BNX2X_MSG_SP
, "PBF cmd queue[%d] timed out\n",
1199 DP(BNX2X_MSG_SP
, "OCCUPANCY[%d] : s:%x\n",
1201 DP(BNX2X_MSG_SP
, "LINES_FREED[%d] : s:%x\n",
1206 DP(BNX2X_MSG_SP
, "Waited %d*%d usec for PBF cmd queue[%d]\n",
1207 poll_count
-cur_cnt
, FLR_WAIT_INTERVAL
, regs
->pN
);
1210 static u32
bnx2x_flr_clnup_reg_poll(struct bnx2x
*bp
, u32 reg
,
1211 u32 expected
, u32 poll_count
)
1213 u32 cur_cnt
= poll_count
;
1216 while ((val
= REG_RD(bp
, reg
)) != expected
&& cur_cnt
--)
1217 udelay(FLR_WAIT_INTERVAL
);
1222 int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x
*bp
, u32 reg
,
1223 char *msg
, u32 poll_cnt
)
1225 u32 val
= bnx2x_flr_clnup_reg_poll(bp
, reg
, 0, poll_cnt
);
1227 BNX2X_ERR("%s usage count=%d\n", msg
, val
);
1233 /* Common routines with VF FLR cleanup */
1234 u32
bnx2x_flr_clnup_poll_count(struct bnx2x
*bp
)
1236 /* adjust polling timeout */
1237 if (CHIP_REV_IS_EMUL(bp
))
1238 return FLR_POLL_CNT
* 2000;
1240 if (CHIP_REV_IS_FPGA(bp
))
1241 return FLR_POLL_CNT
* 120;
1243 return FLR_POLL_CNT
;
1246 void bnx2x_tx_hw_flushed(struct bnx2x
*bp
, u32 poll_count
)
1248 struct pbf_pN_cmd_regs cmd_regs
[] = {
1249 {0, (CHIP_IS_E3B0(bp
)) ?
1250 PBF_REG_TQ_OCCUPANCY_Q0
:
1251 PBF_REG_P0_TQ_OCCUPANCY
,
1252 (CHIP_IS_E3B0(bp
)) ?
1253 PBF_REG_TQ_LINES_FREED_CNT_Q0
:
1254 PBF_REG_P0_TQ_LINES_FREED_CNT
},
1255 {1, (CHIP_IS_E3B0(bp
)) ?
1256 PBF_REG_TQ_OCCUPANCY_Q1
:
1257 PBF_REG_P1_TQ_OCCUPANCY
,
1258 (CHIP_IS_E3B0(bp
)) ?
1259 PBF_REG_TQ_LINES_FREED_CNT_Q1
:
1260 PBF_REG_P1_TQ_LINES_FREED_CNT
},
1261 {4, (CHIP_IS_E3B0(bp
)) ?
1262 PBF_REG_TQ_OCCUPANCY_LB_Q
:
1263 PBF_REG_P4_TQ_OCCUPANCY
,
1264 (CHIP_IS_E3B0(bp
)) ?
1265 PBF_REG_TQ_LINES_FREED_CNT_LB_Q
:
1266 PBF_REG_P4_TQ_LINES_FREED_CNT
}
1269 struct pbf_pN_buf_regs buf_regs
[] = {
1270 {0, (CHIP_IS_E3B0(bp
)) ?
1271 PBF_REG_INIT_CRD_Q0
:
1272 PBF_REG_P0_INIT_CRD
,
1273 (CHIP_IS_E3B0(bp
)) ?
1276 (CHIP_IS_E3B0(bp
)) ?
1277 PBF_REG_INTERNAL_CRD_FREED_CNT_Q0
:
1278 PBF_REG_P0_INTERNAL_CRD_FREED_CNT
},
1279 {1, (CHIP_IS_E3B0(bp
)) ?
1280 PBF_REG_INIT_CRD_Q1
:
1281 PBF_REG_P1_INIT_CRD
,
1282 (CHIP_IS_E3B0(bp
)) ?
1285 (CHIP_IS_E3B0(bp
)) ?
1286 PBF_REG_INTERNAL_CRD_FREED_CNT_Q1
:
1287 PBF_REG_P1_INTERNAL_CRD_FREED_CNT
},
1288 {4, (CHIP_IS_E3B0(bp
)) ?
1289 PBF_REG_INIT_CRD_LB_Q
:
1290 PBF_REG_P4_INIT_CRD
,
1291 (CHIP_IS_E3B0(bp
)) ?
1292 PBF_REG_CREDIT_LB_Q
:
1294 (CHIP_IS_E3B0(bp
)) ?
1295 PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q
:
1296 PBF_REG_P4_INTERNAL_CRD_FREED_CNT
},
1301 /* Verify the command queues are flushed P0, P1, P4 */
1302 for (i
= 0; i
< ARRAY_SIZE(cmd_regs
); i
++)
1303 bnx2x_pbf_pN_cmd_flushed(bp
, &cmd_regs
[i
], poll_count
);
1305 /* Verify the transmission buffers are flushed P0, P1, P4 */
1306 for (i
= 0; i
< ARRAY_SIZE(buf_regs
); i
++)
1307 bnx2x_pbf_pN_buf_flushed(bp
, &buf_regs
[i
], poll_count
);
1310 #define OP_GEN_PARAM(param) \
1311 (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
1313 #define OP_GEN_TYPE(type) \
1314 (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
1316 #define OP_GEN_AGG_VECT(index) \
1317 (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
1319 int bnx2x_send_final_clnup(struct bnx2x
*bp
, u8 clnup_func
, u32 poll_cnt
)
1321 u32 op_gen_command
= 0;
1322 u32 comp_addr
= BAR_CSTRORM_INTMEM
+
1323 CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func
);
1326 if (REG_RD(bp
, comp_addr
)) {
1327 BNX2X_ERR("Cleanup complete was not 0 before sending\n");
1331 op_gen_command
|= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX
);
1332 op_gen_command
|= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE
);
1333 op_gen_command
|= OP_GEN_AGG_VECT(clnup_func
);
1334 op_gen_command
|= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT
;
1336 DP(BNX2X_MSG_SP
, "sending FW Final cleanup\n");
1337 REG_WR(bp
, XSDM_REG_OPERATION_GEN
, op_gen_command
);
1339 if (bnx2x_flr_clnup_reg_poll(bp
, comp_addr
, 1, poll_cnt
) != 1) {
1340 BNX2X_ERR("FW final cleanup did not succeed\n");
1341 DP(BNX2X_MSG_SP
, "At timeout completion address contained %x\n",
1342 (REG_RD(bp
, comp_addr
)));
1346 /* Zero completion for next FLR */
1347 REG_WR(bp
, comp_addr
, 0);
1352 u8
bnx2x_is_pcie_pending(struct pci_dev
*dev
)
1356 pcie_capability_read_word(dev
, PCI_EXP_DEVSTA
, &status
);
1357 return status
& PCI_EXP_DEVSTA_TRPND
;
1360 /* PF FLR specific routines
1362 static int bnx2x_poll_hw_usage_counters(struct bnx2x
*bp
, u32 poll_cnt
)
1364 /* wait for CFC PF usage-counter to zero (includes all the VFs) */
1365 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1366 CFC_REG_NUM_LCIDS_INSIDE_PF
,
1367 "CFC PF usage counter timed out",
1371 /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
1372 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1373 DORQ_REG_PF_USAGE_CNT
,
1374 "DQ PF usage counter timed out",
1378 /* Wait for QM PF usage-counter to zero (until DQ cleanup) */
1379 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1380 QM_REG_PF_USG_CNT_0
+ 4*BP_FUNC(bp
),
1381 "QM PF usage counter timed out",
1385 /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
1386 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1387 TM_REG_LIN0_VNIC_UC
+ 4*BP_PORT(bp
),
1388 "Timers VNIC usage counter timed out",
1391 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1392 TM_REG_LIN0_NUM_SCANS
+ 4*BP_PORT(bp
),
1393 "Timers NUM_SCANS usage counter timed out",
1397 /* Wait DMAE PF usage counter to zero */
1398 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1399 dmae_reg_go_c
[INIT_DMAE_C(bp
)],
1400 "DMAE command register timed out",
1407 static void bnx2x_hw_enable_status(struct bnx2x
*bp
)
1411 val
= REG_RD(bp
, CFC_REG_WEAK_ENABLE_PF
);
1412 DP(BNX2X_MSG_SP
, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val
);
1414 val
= REG_RD(bp
, PBF_REG_DISABLE_PF
);
1415 DP(BNX2X_MSG_SP
, "PBF_REG_DISABLE_PF is 0x%x\n", val
);
1417 val
= REG_RD(bp
, IGU_REG_PCI_PF_MSI_EN
);
1418 DP(BNX2X_MSG_SP
, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val
);
1420 val
= REG_RD(bp
, IGU_REG_PCI_PF_MSIX_EN
);
1421 DP(BNX2X_MSG_SP
, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val
);
1423 val
= REG_RD(bp
, IGU_REG_PCI_PF_MSIX_FUNC_MASK
);
1424 DP(BNX2X_MSG_SP
, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val
);
1426 val
= REG_RD(bp
, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR
);
1427 DP(BNX2X_MSG_SP
, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val
);
1429 val
= REG_RD(bp
, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR
);
1430 DP(BNX2X_MSG_SP
, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val
);
1432 val
= REG_RD(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
);
1433 DP(BNX2X_MSG_SP
, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n",
1437 static int bnx2x_pf_flr_clnup(struct bnx2x
*bp
)
1439 u32 poll_cnt
= bnx2x_flr_clnup_poll_count(bp
);
1441 DP(BNX2X_MSG_SP
, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp
));
1443 /* Re-enable PF target read access */
1444 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ
, 1);
1446 /* Poll HW usage counters */
1447 DP(BNX2X_MSG_SP
, "Polling usage counters\n");
1448 if (bnx2x_poll_hw_usage_counters(bp
, poll_cnt
))
1451 /* Zero the igu 'trailing edge' and 'leading edge' */
1453 /* Send the FW cleanup command */
1454 if (bnx2x_send_final_clnup(bp
, (u8
)BP_FUNC(bp
), poll_cnt
))
1459 /* Verify TX hw is flushed */
1460 bnx2x_tx_hw_flushed(bp
, poll_cnt
);
1462 /* Wait 100ms (not adjusted according to platform) */
1465 /* Verify no pending pci transactions */
1466 if (bnx2x_is_pcie_pending(bp
->pdev
))
1467 BNX2X_ERR("PCIE Transactions still pending\n");
1470 bnx2x_hw_enable_status(bp
);
1473 * Master enable - Due to WB DMAE writes performed before this
1474 * register is re-initialized as part of the regular function init
1476 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 1);
1481 static void bnx2x_hc_int_enable(struct bnx2x
*bp
)
1483 int port
= BP_PORT(bp
);
1484 u32 addr
= port
? HC_REG_CONFIG_1
: HC_REG_CONFIG_0
;
1485 u32 val
= REG_RD(bp
, addr
);
1486 bool msix
= (bp
->flags
& USING_MSIX_FLAG
) ? true : false;
1487 bool single_msix
= (bp
->flags
& USING_SINGLE_MSIX_FLAG
) ? true : false;
1488 bool msi
= (bp
->flags
& USING_MSI_FLAG
) ? true : false;
1491 val
&= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
1492 HC_CONFIG_0_REG_INT_LINE_EN_0
);
1493 val
|= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
|
1494 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
1496 val
|= HC_CONFIG_0_REG_SINGLE_ISR_EN_0
;
1498 val
&= ~HC_CONFIG_0_REG_INT_LINE_EN_0
;
1499 val
|= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
1500 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
|
1501 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
1503 val
|= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
1504 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
|
1505 HC_CONFIG_0_REG_INT_LINE_EN_0
|
1506 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
1508 if (!CHIP_IS_E1(bp
)) {
1510 "write %x to HC %d (addr 0x%x)\n", val
, port
, addr
);
1512 REG_WR(bp
, addr
, val
);
1514 val
&= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
;
1519 REG_WR(bp
, HC_REG_INT_MASK
+ port
*4, 0x1FFFF);
1522 "write %x to HC %d (addr 0x%x) mode %s\n", val
, port
, addr
,
1523 (msix
? "MSI-X" : (msi
? "MSI" : "INTx")));
1525 REG_WR(bp
, addr
, val
);
1527 * Ensure that HC_CONFIG is written before leading/trailing edge config
1532 if (!CHIP_IS_E1(bp
)) {
1533 /* init leading/trailing edge */
1535 val
= (0xee0f | (1 << (BP_VN(bp
) + 4)));
1537 /* enable nig and gpio3 attention */
1542 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, val
);
1543 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, val
);
1546 /* Make sure that interrupts are indeed enabled from here on */
1550 static void bnx2x_igu_int_enable(struct bnx2x
*bp
)
1553 bool msix
= (bp
->flags
& USING_MSIX_FLAG
) ? true : false;
1554 bool single_msix
= (bp
->flags
& USING_SINGLE_MSIX_FLAG
) ? true : false;
1555 bool msi
= (bp
->flags
& USING_MSI_FLAG
) ? true : false;
1557 val
= REG_RD(bp
, IGU_REG_PF_CONFIGURATION
);
1560 val
&= ~(IGU_PF_CONF_INT_LINE_EN
|
1561 IGU_PF_CONF_SINGLE_ISR_EN
);
1562 val
|= (IGU_PF_CONF_MSI_MSIX_EN
|
1563 IGU_PF_CONF_ATTN_BIT_EN
);
1566 val
|= IGU_PF_CONF_SINGLE_ISR_EN
;
1568 val
&= ~IGU_PF_CONF_INT_LINE_EN
;
1569 val
|= (IGU_PF_CONF_MSI_MSIX_EN
|
1570 IGU_PF_CONF_ATTN_BIT_EN
|
1571 IGU_PF_CONF_SINGLE_ISR_EN
);
1573 val
&= ~IGU_PF_CONF_MSI_MSIX_EN
;
1574 val
|= (IGU_PF_CONF_INT_LINE_EN
|
1575 IGU_PF_CONF_ATTN_BIT_EN
|
1576 IGU_PF_CONF_SINGLE_ISR_EN
);
1579 /* Clean previous status - need to configure igu prior to ack*/
1580 if ((!msix
) || single_msix
) {
1581 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, val
);
1585 val
|= IGU_PF_CONF_FUNC_EN
;
1587 DP(NETIF_MSG_IFUP
, "write 0x%x to IGU mode %s\n",
1588 val
, (msix
? "MSI-X" : (msi
? "MSI" : "INTx")));
1590 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, val
);
1592 if (val
& IGU_PF_CONF_INT_LINE_EN
)
1593 pci_intx(bp
->pdev
, true);
1597 /* init leading/trailing edge */
1599 val
= (0xee0f | (1 << (BP_VN(bp
) + 4)));
1601 /* enable nig and gpio3 attention */
1606 REG_WR(bp
, IGU_REG_TRAILING_EDGE_LATCH
, val
);
1607 REG_WR(bp
, IGU_REG_LEADING_EDGE_LATCH
, val
);
1609 /* Make sure that interrupts are indeed enabled from here on */
1613 void bnx2x_int_enable(struct bnx2x
*bp
)
1615 if (bp
->common
.int_block
== INT_BLOCK_HC
)
1616 bnx2x_hc_int_enable(bp
);
1618 bnx2x_igu_int_enable(bp
);
1621 void bnx2x_int_disable_sync(struct bnx2x
*bp
, int disable_hw
)
1623 int msix
= (bp
->flags
& USING_MSIX_FLAG
) ? 1 : 0;
1627 /* prevent the HW from sending interrupts */
1628 bnx2x_int_disable(bp
);
1630 /* make sure all ISRs are done */
1632 synchronize_irq(bp
->msix_table
[0].vector
);
1634 if (CNIC_SUPPORT(bp
))
1636 for_each_eth_queue(bp
, i
)
1637 synchronize_irq(bp
->msix_table
[offset
++].vector
);
1639 synchronize_irq(bp
->pdev
->irq
);
1641 /* make sure sp_task is not running */
1642 cancel_delayed_work(&bp
->sp_task
);
1643 cancel_delayed_work(&bp
->period_task
);
1644 flush_workqueue(bnx2x_wq
);
1650 * General service functions
1653 /* Return true if succeeded to acquire the lock */
1654 static bool bnx2x_trylock_hw_lock(struct bnx2x
*bp
, u32 resource
)
1657 u32 resource_bit
= (1 << resource
);
1658 int func
= BP_FUNC(bp
);
1659 u32 hw_lock_control_reg
;
1661 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
,
1662 "Trying to take a lock on resource %d\n", resource
);
1664 /* Validating that the resource is within range */
1665 if (resource
> HW_LOCK_MAX_RESOURCE_VALUE
) {
1666 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
,
1667 "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1668 resource
, HW_LOCK_MAX_RESOURCE_VALUE
);
1673 hw_lock_control_reg
= (MISC_REG_DRIVER_CONTROL_1
+ func
*8);
1675 hw_lock_control_reg
=
1676 (MISC_REG_DRIVER_CONTROL_7
+ (func
- 6)*8);
1678 /* Try to acquire the lock */
1679 REG_WR(bp
, hw_lock_control_reg
+ 4, resource_bit
);
1680 lock_status
= REG_RD(bp
, hw_lock_control_reg
);
1681 if (lock_status
& resource_bit
)
1684 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
,
1685 "Failed to get a lock on resource %d\n", resource
);
1690 * bnx2x_get_leader_lock_resource - get the recovery leader resource id
1692 * @bp: driver handle
1694 * Returns the recovery leader resource id according to the engine this function
1695 * belongs to. Currently only only 2 engines is supported.
1697 static int bnx2x_get_leader_lock_resource(struct bnx2x
*bp
)
1700 return HW_LOCK_RESOURCE_RECOVERY_LEADER_1
;
1702 return HW_LOCK_RESOURCE_RECOVERY_LEADER_0
;
1706 * bnx2x_trylock_leader_lock- try to acquire a leader lock.
1708 * @bp: driver handle
1710 * Tries to acquire a leader lock for current engine.
1712 static bool bnx2x_trylock_leader_lock(struct bnx2x
*bp
)
1714 return bnx2x_trylock_hw_lock(bp
, bnx2x_get_leader_lock_resource(bp
));
1717 static void bnx2x_cnic_cfc_comp(struct bnx2x
*bp
, int cid
, u8 err
);
1719 /* schedule the sp task and mark that interrupt occurred (runs from ISR) */
1720 static int bnx2x_schedule_sp_task(struct bnx2x
*bp
)
1722 /* Set the interrupt occurred bit for the sp-task to recognize it
1723 * must ack the interrupt and transition according to the IGU
1726 atomic_set(&bp
->interrupt_occurred
, 1);
1728 /* The sp_task must execute only after this bit
1729 * is set, otherwise we will get out of sync and miss all
1730 * further interrupts. Hence, the barrier.
1734 /* schedule sp_task to workqueue */
1735 return queue_delayed_work(bnx2x_wq
, &bp
->sp_task
, 0);
1738 void bnx2x_sp_event(struct bnx2x_fastpath
*fp
, union eth_rx_cqe
*rr_cqe
)
1740 struct bnx2x
*bp
= fp
->bp
;
1741 int cid
= SW_CID(rr_cqe
->ramrod_cqe
.conn_and_cmd_data
);
1742 int command
= CQE_CMD(rr_cqe
->ramrod_cqe
.conn_and_cmd_data
);
1743 enum bnx2x_queue_cmd drv_cmd
= BNX2X_Q_CMD_MAX
;
1744 struct bnx2x_queue_sp_obj
*q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
1747 "fp %d cid %d got ramrod #%d state is %x type is %d\n",
1748 fp
->index
, cid
, command
, bp
->state
,
1749 rr_cqe
->ramrod_cqe
.ramrod_type
);
1751 /* If cid is within VF range, replace the slowpath object with the
1752 * one corresponding to this VF
1754 if (cid
>= BNX2X_FIRST_VF_CID
&&
1755 cid
< BNX2X_FIRST_VF_CID
+ BNX2X_VF_CIDS
)
1756 bnx2x_iov_set_queue_sp_obj(bp
, cid
, &q_obj
);
1759 case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE
):
1760 DP(BNX2X_MSG_SP
, "got UPDATE ramrod. CID %d\n", cid
);
1761 drv_cmd
= BNX2X_Q_CMD_UPDATE
;
1764 case (RAMROD_CMD_ID_ETH_CLIENT_SETUP
):
1765 DP(BNX2X_MSG_SP
, "got MULTI[%d] setup ramrod\n", cid
);
1766 drv_cmd
= BNX2X_Q_CMD_SETUP
;
1769 case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP
):
1770 DP(BNX2X_MSG_SP
, "got MULTI[%d] tx-only setup ramrod\n", cid
);
1771 drv_cmd
= BNX2X_Q_CMD_SETUP_TX_ONLY
;
1774 case (RAMROD_CMD_ID_ETH_HALT
):
1775 DP(BNX2X_MSG_SP
, "got MULTI[%d] halt ramrod\n", cid
);
1776 drv_cmd
= BNX2X_Q_CMD_HALT
;
1779 case (RAMROD_CMD_ID_ETH_TERMINATE
):
1780 DP(BNX2X_MSG_SP
, "got MULTI[%d] terminate ramrod\n", cid
);
1781 drv_cmd
= BNX2X_Q_CMD_TERMINATE
;
1784 case (RAMROD_CMD_ID_ETH_EMPTY
):
1785 DP(BNX2X_MSG_SP
, "got MULTI[%d] empty ramrod\n", cid
);
1786 drv_cmd
= BNX2X_Q_CMD_EMPTY
;
1790 BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n",
1791 command
, fp
->index
);
1795 if ((drv_cmd
!= BNX2X_Q_CMD_MAX
) &&
1796 q_obj
->complete_cmd(bp
, q_obj
, drv_cmd
))
1797 /* q_obj->complete_cmd() failure means that this was
1798 * an unexpected completion.
1800 * In this case we don't want to increase the bp->spq_left
1801 * because apparently we haven't sent this command the first
1804 #ifdef BNX2X_STOP_ON_ERROR
1809 /* SRIOV: reschedule any 'in_progress' operations */
1810 bnx2x_iov_sp_event(bp
, cid
, true);
1812 smp_mb__before_atomic_inc();
1813 atomic_inc(&bp
->cq_spq_left
);
1814 /* push the change in bp->spq_left and towards the memory */
1815 smp_mb__after_atomic_inc();
1817 DP(BNX2X_MSG_SP
, "bp->cq_spq_left %x\n", atomic_read(&bp
->cq_spq_left
));
1819 if ((drv_cmd
== BNX2X_Q_CMD_UPDATE
) && (IS_FCOE_FP(fp
)) &&
1820 (!!test_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING
, &bp
->sp_state
))) {
1821 /* if Q update ramrod is completed for last Q in AFEX vif set
1822 * flow, then ACK MCP at the end
1824 * mark pending ACK to MCP bit.
1825 * prevent case that both bits are cleared.
1826 * At the end of load/unload driver checks that
1827 * sp_state is cleared, and this order prevents
1830 smp_mb__before_clear_bit();
1831 set_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK
, &bp
->sp_state
);
1833 clear_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING
, &bp
->sp_state
);
1834 smp_mb__after_clear_bit();
1836 /* schedule the sp task as mcp ack is required */
1837 bnx2x_schedule_sp_task(bp
);
1843 irqreturn_t
bnx2x_interrupt(int irq
, void *dev_instance
)
1845 struct bnx2x
*bp
= netdev_priv(dev_instance
);
1846 u16 status
= bnx2x_ack_int(bp
);
1851 /* Return here if interrupt is shared and it's not for us */
1852 if (unlikely(status
== 0)) {
1853 DP(NETIF_MSG_INTR
, "not our interrupt!\n");
1856 DP(NETIF_MSG_INTR
, "got an interrupt status 0x%x\n", status
);
1858 #ifdef BNX2X_STOP_ON_ERROR
1859 if (unlikely(bp
->panic
))
1863 for_each_eth_queue(bp
, i
) {
1864 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
1866 mask
= 0x2 << (fp
->index
+ CNIC_SUPPORT(bp
));
1867 if (status
& mask
) {
1868 /* Handle Rx or Tx according to SB id */
1869 for_each_cos_in_tx_queue(fp
, cos
)
1870 prefetch(fp
->txdata_ptr
[cos
]->tx_cons_sb
);
1871 prefetch(&fp
->sb_running_index
[SM_RX_ID
]);
1872 napi_schedule(&bnx2x_fp(bp
, fp
->index
, napi
));
1877 if (CNIC_SUPPORT(bp
)) {
1879 if (status
& (mask
| 0x1)) {
1880 struct cnic_ops
*c_ops
= NULL
;
1883 c_ops
= rcu_dereference(bp
->cnic_ops
);
1884 if (c_ops
&& (bp
->cnic_eth_dev
.drv_state
&
1885 CNIC_DRV_STATE_HANDLES_IRQ
))
1886 c_ops
->cnic_handler(bp
->cnic_data
, NULL
);
1893 if (unlikely(status
& 0x1)) {
1895 /* schedule sp task to perform default status block work, ack
1896 * attentions and enable interrupts.
1898 bnx2x_schedule_sp_task(bp
);
1905 if (unlikely(status
))
1906 DP(NETIF_MSG_INTR
, "got an unknown interrupt! (status 0x%x)\n",
1915 * General service functions
1918 int bnx2x_acquire_hw_lock(struct bnx2x
*bp
, u32 resource
)
1921 u32 resource_bit
= (1 << resource
);
1922 int func
= BP_FUNC(bp
);
1923 u32 hw_lock_control_reg
;
1926 /* Validating that the resource is within range */
1927 if (resource
> HW_LOCK_MAX_RESOURCE_VALUE
) {
1928 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1929 resource
, HW_LOCK_MAX_RESOURCE_VALUE
);
1934 hw_lock_control_reg
= (MISC_REG_DRIVER_CONTROL_1
+ func
*8);
1936 hw_lock_control_reg
=
1937 (MISC_REG_DRIVER_CONTROL_7
+ (func
- 6)*8);
1940 /* Validating that the resource is not already taken */
1941 lock_status
= REG_RD(bp
, hw_lock_control_reg
);
1942 if (lock_status
& resource_bit
) {
1943 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x\n",
1944 lock_status
, resource_bit
);
1948 /* Try for 5 second every 5ms */
1949 for (cnt
= 0; cnt
< 1000; cnt
++) {
1950 /* Try to acquire the lock */
1951 REG_WR(bp
, hw_lock_control_reg
+ 4, resource_bit
);
1952 lock_status
= REG_RD(bp
, hw_lock_control_reg
);
1953 if (lock_status
& resource_bit
)
1956 usleep_range(5000, 10000);
1958 BNX2X_ERR("Timeout\n");
1962 int bnx2x_release_leader_lock(struct bnx2x
*bp
)
1964 return bnx2x_release_hw_lock(bp
, bnx2x_get_leader_lock_resource(bp
));
1967 int bnx2x_release_hw_lock(struct bnx2x
*bp
, u32 resource
)
1970 u32 resource_bit
= (1 << resource
);
1971 int func
= BP_FUNC(bp
);
1972 u32 hw_lock_control_reg
;
1974 /* Validating that the resource is within range */
1975 if (resource
> HW_LOCK_MAX_RESOURCE_VALUE
) {
1976 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1977 resource
, HW_LOCK_MAX_RESOURCE_VALUE
);
1982 hw_lock_control_reg
= (MISC_REG_DRIVER_CONTROL_1
+ func
*8);
1984 hw_lock_control_reg
=
1985 (MISC_REG_DRIVER_CONTROL_7
+ (func
- 6)*8);
1988 /* Validating that the resource is currently taken */
1989 lock_status
= REG_RD(bp
, hw_lock_control_reg
);
1990 if (!(lock_status
& resource_bit
)) {
1991 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x. Unlock was called but lock wasn't taken!\n",
1992 lock_status
, resource_bit
);
1996 REG_WR(bp
, hw_lock_control_reg
, resource_bit
);
2000 int bnx2x_get_gpio(struct bnx2x
*bp
, int gpio_num
, u8 port
)
2002 /* The GPIO should be swapped if swap register is set and active */
2003 int gpio_port
= (REG_RD(bp
, NIG_REG_PORT_SWAP
) &&
2004 REG_RD(bp
, NIG_REG_STRAP_OVERRIDE
)) ^ port
;
2005 int gpio_shift
= gpio_num
+
2006 (gpio_port
? MISC_REGISTERS_GPIO_PORT_SHIFT
: 0);
2007 u32 gpio_mask
= (1 << gpio_shift
);
2011 if (gpio_num
> MISC_REGISTERS_GPIO_3
) {
2012 BNX2X_ERR("Invalid GPIO %d\n", gpio_num
);
2016 /* read GPIO value */
2017 gpio_reg
= REG_RD(bp
, MISC_REG_GPIO
);
2019 /* get the requested pin value */
2020 if ((gpio_reg
& gpio_mask
) == gpio_mask
)
2025 DP(NETIF_MSG_LINK
, "pin %d value 0x%x\n", gpio_num
, value
);
2030 int bnx2x_set_gpio(struct bnx2x
*bp
, int gpio_num
, u32 mode
, u8 port
)
2032 /* The GPIO should be swapped if swap register is set and active */
2033 int gpio_port
= (REG_RD(bp
, NIG_REG_PORT_SWAP
) &&
2034 REG_RD(bp
, NIG_REG_STRAP_OVERRIDE
)) ^ port
;
2035 int gpio_shift
= gpio_num
+
2036 (gpio_port
? MISC_REGISTERS_GPIO_PORT_SHIFT
: 0);
2037 u32 gpio_mask
= (1 << gpio_shift
);
2040 if (gpio_num
> MISC_REGISTERS_GPIO_3
) {
2041 BNX2X_ERR("Invalid GPIO %d\n", gpio_num
);
2045 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2046 /* read GPIO and mask except the float bits */
2047 gpio_reg
= (REG_RD(bp
, MISC_REG_GPIO
) & MISC_REGISTERS_GPIO_FLOAT
);
2050 case MISC_REGISTERS_GPIO_OUTPUT_LOW
:
2052 "Set GPIO %d (shift %d) -> output low\n",
2053 gpio_num
, gpio_shift
);
2054 /* clear FLOAT and set CLR */
2055 gpio_reg
&= ~(gpio_mask
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2056 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_CLR_POS
);
2059 case MISC_REGISTERS_GPIO_OUTPUT_HIGH
:
2061 "Set GPIO %d (shift %d) -> output high\n",
2062 gpio_num
, gpio_shift
);
2063 /* clear FLOAT and set SET */
2064 gpio_reg
&= ~(gpio_mask
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2065 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_SET_POS
);
2068 case MISC_REGISTERS_GPIO_INPUT_HI_Z
:
2070 "Set GPIO %d (shift %d) -> input\n",
2071 gpio_num
, gpio_shift
);
2073 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2080 REG_WR(bp
, MISC_REG_GPIO
, gpio_reg
);
2081 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2086 int bnx2x_set_mult_gpio(struct bnx2x
*bp
, u8 pins
, u32 mode
)
2091 /* Any port swapping should be handled by caller. */
2093 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2094 /* read GPIO and mask except the float bits */
2095 gpio_reg
= REG_RD(bp
, MISC_REG_GPIO
);
2096 gpio_reg
&= ~(pins
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2097 gpio_reg
&= ~(pins
<< MISC_REGISTERS_GPIO_CLR_POS
);
2098 gpio_reg
&= ~(pins
<< MISC_REGISTERS_GPIO_SET_POS
);
2101 case MISC_REGISTERS_GPIO_OUTPUT_LOW
:
2102 DP(NETIF_MSG_LINK
, "Set GPIO 0x%x -> output low\n", pins
);
2104 gpio_reg
|= (pins
<< MISC_REGISTERS_GPIO_CLR_POS
);
2107 case MISC_REGISTERS_GPIO_OUTPUT_HIGH
:
2108 DP(NETIF_MSG_LINK
, "Set GPIO 0x%x -> output high\n", pins
);
2110 gpio_reg
|= (pins
<< MISC_REGISTERS_GPIO_SET_POS
);
2113 case MISC_REGISTERS_GPIO_INPUT_HI_Z
:
2114 DP(NETIF_MSG_LINK
, "Set GPIO 0x%x -> input\n", pins
);
2116 gpio_reg
|= (pins
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2120 BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode
);
2126 REG_WR(bp
, MISC_REG_GPIO
, gpio_reg
);
2128 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2133 int bnx2x_set_gpio_int(struct bnx2x
*bp
, int gpio_num
, u32 mode
, u8 port
)
2135 /* The GPIO should be swapped if swap register is set and active */
2136 int gpio_port
= (REG_RD(bp
, NIG_REG_PORT_SWAP
) &&
2137 REG_RD(bp
, NIG_REG_STRAP_OVERRIDE
)) ^ port
;
2138 int gpio_shift
= gpio_num
+
2139 (gpio_port
? MISC_REGISTERS_GPIO_PORT_SHIFT
: 0);
2140 u32 gpio_mask
= (1 << gpio_shift
);
2143 if (gpio_num
> MISC_REGISTERS_GPIO_3
) {
2144 BNX2X_ERR("Invalid GPIO %d\n", gpio_num
);
2148 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2150 gpio_reg
= REG_RD(bp
, MISC_REG_GPIO_INT
);
2153 case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR
:
2155 "Clear GPIO INT %d (shift %d) -> output low\n",
2156 gpio_num
, gpio_shift
);
2157 /* clear SET and set CLR */
2158 gpio_reg
&= ~(gpio_mask
<< MISC_REGISTERS_GPIO_INT_SET_POS
);
2159 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_INT_CLR_POS
);
2162 case MISC_REGISTERS_GPIO_INT_OUTPUT_SET
:
2164 "Set GPIO INT %d (shift %d) -> output high\n",
2165 gpio_num
, gpio_shift
);
2166 /* clear CLR and set SET */
2167 gpio_reg
&= ~(gpio_mask
<< MISC_REGISTERS_GPIO_INT_CLR_POS
);
2168 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_INT_SET_POS
);
2175 REG_WR(bp
, MISC_REG_GPIO_INT
, gpio_reg
);
2176 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2181 static int bnx2x_set_spio(struct bnx2x
*bp
, int spio
, u32 mode
)
2185 /* Only 2 SPIOs are configurable */
2186 if ((spio
!= MISC_SPIO_SPIO4
) && (spio
!= MISC_SPIO_SPIO5
)) {
2187 BNX2X_ERR("Invalid SPIO 0x%x\n", spio
);
2191 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_SPIO
);
2192 /* read SPIO and mask except the float bits */
2193 spio_reg
= (REG_RD(bp
, MISC_REG_SPIO
) & MISC_SPIO_FLOAT
);
2196 case MISC_SPIO_OUTPUT_LOW
:
2197 DP(NETIF_MSG_HW
, "Set SPIO 0x%x -> output low\n", spio
);
2198 /* clear FLOAT and set CLR */
2199 spio_reg
&= ~(spio
<< MISC_SPIO_FLOAT_POS
);
2200 spio_reg
|= (spio
<< MISC_SPIO_CLR_POS
);
2203 case MISC_SPIO_OUTPUT_HIGH
:
2204 DP(NETIF_MSG_HW
, "Set SPIO 0x%x -> output high\n", spio
);
2205 /* clear FLOAT and set SET */
2206 spio_reg
&= ~(spio
<< MISC_SPIO_FLOAT_POS
);
2207 spio_reg
|= (spio
<< MISC_SPIO_SET_POS
);
2210 case MISC_SPIO_INPUT_HI_Z
:
2211 DP(NETIF_MSG_HW
, "Set SPIO 0x%x -> input\n", spio
);
2213 spio_reg
|= (spio
<< MISC_SPIO_FLOAT_POS
);
2220 REG_WR(bp
, MISC_REG_SPIO
, spio_reg
);
2221 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_SPIO
);
2226 void bnx2x_calc_fc_adv(struct bnx2x
*bp
)
2228 u8 cfg_idx
= bnx2x_get_link_cfg_idx(bp
);
2229 switch (bp
->link_vars
.ieee_fc
&
2230 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK
) {
2231 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE
:
2232 bp
->port
.advertising
[cfg_idx
] &= ~(ADVERTISED_Asym_Pause
|
2236 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH
:
2237 bp
->port
.advertising
[cfg_idx
] |= (ADVERTISED_Asym_Pause
|
2241 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC
:
2242 bp
->port
.advertising
[cfg_idx
] |= ADVERTISED_Asym_Pause
;
2246 bp
->port
.advertising
[cfg_idx
] &= ~(ADVERTISED_Asym_Pause
|
2252 static void bnx2x_set_requested_fc(struct bnx2x
*bp
)
2254 /* Initialize link parameters structure variables
2255 * It is recommended to turn off RX FC for jumbo frames
2256 * for better performance
2258 if (CHIP_IS_E1x(bp
) && (bp
->dev
->mtu
> 5000))
2259 bp
->link_params
.req_fc_auto_adv
= BNX2X_FLOW_CTRL_TX
;
2261 bp
->link_params
.req_fc_auto_adv
= BNX2X_FLOW_CTRL_BOTH
;
2264 static void bnx2x_init_dropless_fc(struct bnx2x
*bp
)
2266 u32 pause_enabled
= 0;
2268 if (!CHIP_IS_E1(bp
) && bp
->dropless_fc
&& bp
->link_vars
.link_up
) {
2269 if (bp
->link_vars
.flow_ctrl
& BNX2X_FLOW_CTRL_TX
)
2272 REG_WR(bp
, BAR_USTRORM_INTMEM
+
2273 USTORM_ETH_PAUSE_ENABLED_OFFSET(BP_PORT(bp
)),
2277 DP(NETIF_MSG_IFUP
| NETIF_MSG_LINK
, "dropless_fc is %s\n",
2278 pause_enabled
? "enabled" : "disabled");
2281 int bnx2x_initial_phy_init(struct bnx2x
*bp
, int load_mode
)
2283 int rc
, cfx_idx
= bnx2x_get_link_cfg_idx(bp
);
2284 u16 req_line_speed
= bp
->link_params
.req_line_speed
[cfx_idx
];
2286 if (!BP_NOMCP(bp
)) {
2287 bnx2x_set_requested_fc(bp
);
2288 bnx2x_acquire_phy_lock(bp
);
2290 if (load_mode
== LOAD_DIAG
) {
2291 struct link_params
*lp
= &bp
->link_params
;
2292 lp
->loopback_mode
= LOOPBACK_XGXS
;
2293 /* do PHY loopback at 10G speed, if possible */
2294 if (lp
->req_line_speed
[cfx_idx
] < SPEED_10000
) {
2295 if (lp
->speed_cap_mask
[cfx_idx
] &
2296 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G
)
2297 lp
->req_line_speed
[cfx_idx
] =
2300 lp
->req_line_speed
[cfx_idx
] =
2305 if (load_mode
== LOAD_LOOPBACK_EXT
) {
2306 struct link_params
*lp
= &bp
->link_params
;
2307 lp
->loopback_mode
= LOOPBACK_EXT
;
2310 rc
= bnx2x_phy_init(&bp
->link_params
, &bp
->link_vars
);
2312 bnx2x_release_phy_lock(bp
);
2314 bnx2x_init_dropless_fc(bp
);
2316 bnx2x_calc_fc_adv(bp
);
2318 if (bp
->link_vars
.link_up
) {
2319 bnx2x_stats_handle(bp
, STATS_EVENT_LINK_UP
);
2320 bnx2x_link_report(bp
);
2322 queue_delayed_work(bnx2x_wq
, &bp
->period_task
, 0);
2323 bp
->link_params
.req_line_speed
[cfx_idx
] = req_line_speed
;
2326 BNX2X_ERR("Bootcode is missing - can not initialize link\n");
2330 void bnx2x_link_set(struct bnx2x
*bp
)
2332 if (!BP_NOMCP(bp
)) {
2333 bnx2x_acquire_phy_lock(bp
);
2334 bnx2x_phy_init(&bp
->link_params
, &bp
->link_vars
);
2335 bnx2x_release_phy_lock(bp
);
2337 bnx2x_init_dropless_fc(bp
);
2339 bnx2x_calc_fc_adv(bp
);
2341 BNX2X_ERR("Bootcode is missing - can not set link\n");
2344 static void bnx2x__link_reset(struct bnx2x
*bp
)
2346 if (!BP_NOMCP(bp
)) {
2347 bnx2x_acquire_phy_lock(bp
);
2348 bnx2x_lfa_reset(&bp
->link_params
, &bp
->link_vars
);
2349 bnx2x_release_phy_lock(bp
);
2351 BNX2X_ERR("Bootcode is missing - can not reset link\n");
2354 void bnx2x_force_link_reset(struct bnx2x
*bp
)
2356 bnx2x_acquire_phy_lock(bp
);
2357 bnx2x_link_reset(&bp
->link_params
, &bp
->link_vars
, 1);
2358 bnx2x_release_phy_lock(bp
);
2361 u8
bnx2x_link_test(struct bnx2x
*bp
, u8 is_serdes
)
2365 if (!BP_NOMCP(bp
)) {
2366 bnx2x_acquire_phy_lock(bp
);
2367 rc
= bnx2x_test_link(&bp
->link_params
, &bp
->link_vars
,
2369 bnx2x_release_phy_lock(bp
);
2371 BNX2X_ERR("Bootcode is missing - can not test link\n");
2376 /* Calculates the sum of vn_min_rates.
2377 It's needed for further normalizing of the min_rates.
2379 sum of vn_min_rates.
2381 0 - if all the min_rates are 0.
2382 In the later case fairness algorithm should be deactivated.
2383 If not all min_rates are zero then those that are zeroes will be set to 1.
2385 static void bnx2x_calc_vn_min(struct bnx2x
*bp
,
2386 struct cmng_init_input
*input
)
2391 for (vn
= VN_0
; vn
< BP_MAX_VN_NUM(bp
); vn
++) {
2392 u32 vn_cfg
= bp
->mf_config
[vn
];
2393 u32 vn_min_rate
= ((vn_cfg
& FUNC_MF_CFG_MIN_BW_MASK
) >>
2394 FUNC_MF_CFG_MIN_BW_SHIFT
) * 100;
2396 /* Skip hidden vns */
2397 if (vn_cfg
& FUNC_MF_CFG_FUNC_HIDE
)
2399 /* If min rate is zero - set it to 1 */
2400 else if (!vn_min_rate
)
2401 vn_min_rate
= DEF_MIN_RATE
;
2405 input
->vnic_min_rate
[vn
] = vn_min_rate
;
2408 /* if ETS or all min rates are zeros - disable fairness */
2409 if (BNX2X_IS_ETS_ENABLED(bp
)) {
2410 input
->flags
.cmng_enables
&=
2411 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN
;
2412 DP(NETIF_MSG_IFUP
, "Fairness will be disabled due to ETS\n");
2413 } else if (all_zero
) {
2414 input
->flags
.cmng_enables
&=
2415 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN
;
2417 "All MIN values are zeroes fairness will be disabled\n");
2419 input
->flags
.cmng_enables
|=
2420 CMNG_FLAGS_PER_PORT_FAIRNESS_VN
;
2423 static void bnx2x_calc_vn_max(struct bnx2x
*bp
, int vn
,
2424 struct cmng_init_input
*input
)
2427 u32 vn_cfg
= bp
->mf_config
[vn
];
2429 if (vn_cfg
& FUNC_MF_CFG_FUNC_HIDE
)
2432 u32 maxCfg
= bnx2x_extract_max_cfg(bp
, vn_cfg
);
2435 /* maxCfg in percents of linkspeed */
2436 vn_max_rate
= (bp
->link_vars
.line_speed
* maxCfg
) / 100;
2437 } else /* SD modes */
2438 /* maxCfg is absolute in 100Mb units */
2439 vn_max_rate
= maxCfg
* 100;
2442 DP(NETIF_MSG_IFUP
, "vn %d: vn_max_rate %d\n", vn
, vn_max_rate
);
2444 input
->vnic_max_rate
[vn
] = vn_max_rate
;
2447 static int bnx2x_get_cmng_fns_mode(struct bnx2x
*bp
)
2449 if (CHIP_REV_IS_SLOW(bp
))
2450 return CMNG_FNS_NONE
;
2452 return CMNG_FNS_MINMAX
;
2454 return CMNG_FNS_NONE
;
2457 void bnx2x_read_mf_cfg(struct bnx2x
*bp
)
2459 int vn
, n
= (CHIP_MODE_IS_4_PORT(bp
) ? 2 : 1);
2462 return; /* what should be the default value in this case */
2464 /* For 2 port configuration the absolute function number formula
2466 * abs_func = 2 * vn + BP_PORT + BP_PATH
2468 * and there are 4 functions per port
2470 * For 4 port configuration it is
2471 * abs_func = 4 * vn + 2 * BP_PORT + BP_PATH
2473 * and there are 2 functions per port
2475 for (vn
= VN_0
; vn
< BP_MAX_VN_NUM(bp
); vn
++) {
2476 int /*abs*/func
= n
* (2 * vn
+ BP_PORT(bp
)) + BP_PATH(bp
);
2478 if (func
>= E1H_FUNC_MAX
)
2482 MF_CFG_RD(bp
, func_mf_config
[func
].config
);
2484 if (bp
->mf_config
[BP_VN(bp
)] & FUNC_MF_CFG_FUNC_DISABLED
) {
2485 DP(NETIF_MSG_IFUP
, "mf_cfg function disabled\n");
2486 bp
->flags
|= MF_FUNC_DIS
;
2488 DP(NETIF_MSG_IFUP
, "mf_cfg function enabled\n");
2489 bp
->flags
&= ~MF_FUNC_DIS
;
2493 static void bnx2x_cmng_fns_init(struct bnx2x
*bp
, u8 read_cfg
, u8 cmng_type
)
2495 struct cmng_init_input input
;
2496 memset(&input
, 0, sizeof(struct cmng_init_input
));
2498 input
.port_rate
= bp
->link_vars
.line_speed
;
2500 if (cmng_type
== CMNG_FNS_MINMAX
&& input
.port_rate
) {
2503 /* read mf conf from shmem */
2505 bnx2x_read_mf_cfg(bp
);
2507 /* vn_weight_sum and enable fairness if not 0 */
2508 bnx2x_calc_vn_min(bp
, &input
);
2510 /* calculate and set min-max rate for each vn */
2512 for (vn
= VN_0
; vn
< BP_MAX_VN_NUM(bp
); vn
++)
2513 bnx2x_calc_vn_max(bp
, vn
, &input
);
2515 /* always enable rate shaping and fairness */
2516 input
.flags
.cmng_enables
|=
2517 CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN
;
2519 bnx2x_init_cmng(&input
, &bp
->cmng
);
2523 /* rate shaping and fairness are disabled */
2525 "rate shaping and fairness are disabled\n");
2528 static void storm_memset_cmng(struct bnx2x
*bp
,
2529 struct cmng_init
*cmng
,
2533 size_t size
= sizeof(struct cmng_struct_per_port
);
2535 u32 addr
= BAR_XSTRORM_INTMEM
+
2536 XSTORM_CMNG_PER_PORT_VARS_OFFSET(port
);
2538 __storm_memset_struct(bp
, addr
, size
, (u32
*)&cmng
->port
);
2540 for (vn
= VN_0
; vn
< BP_MAX_VN_NUM(bp
); vn
++) {
2541 int func
= func_by_vn(bp
, vn
);
2543 addr
= BAR_XSTRORM_INTMEM
+
2544 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func
);
2545 size
= sizeof(struct rate_shaping_vars_per_vn
);
2546 __storm_memset_struct(bp
, addr
, size
,
2547 (u32
*)&cmng
->vnic
.vnic_max_rate
[vn
]);
2549 addr
= BAR_XSTRORM_INTMEM
+
2550 XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func
);
2551 size
= sizeof(struct fairness_vars_per_vn
);
2552 __storm_memset_struct(bp
, addr
, size
,
2553 (u32
*)&cmng
->vnic
.vnic_min_rate
[vn
]);
2557 /* init cmng mode in HW according to local configuration */
2558 void bnx2x_set_local_cmng(struct bnx2x
*bp
)
2560 int cmng_fns
= bnx2x_get_cmng_fns_mode(bp
);
2562 if (cmng_fns
!= CMNG_FNS_NONE
) {
2563 bnx2x_cmng_fns_init(bp
, false, cmng_fns
);
2564 storm_memset_cmng(bp
, &bp
->cmng
, BP_PORT(bp
));
2566 /* rate shaping and fairness are disabled */
2568 "single function mode without fairness\n");
2572 /* This function is called upon link interrupt */
2573 static void bnx2x_link_attn(struct bnx2x
*bp
)
2575 /* Make sure that we are synced with the current statistics */
2576 bnx2x_stats_handle(bp
, STATS_EVENT_STOP
);
2578 bnx2x_link_update(&bp
->link_params
, &bp
->link_vars
);
2580 bnx2x_init_dropless_fc(bp
);
2582 if (bp
->link_vars
.link_up
) {
2584 if (bp
->link_vars
.mac_type
!= MAC_TYPE_EMAC
) {
2585 struct host_port_stats
*pstats
;
2587 pstats
= bnx2x_sp(bp
, port_stats
);
2588 /* reset old mac stats */
2589 memset(&(pstats
->mac_stx
[0]), 0,
2590 sizeof(struct mac_stx
));
2592 if (bp
->state
== BNX2X_STATE_OPEN
)
2593 bnx2x_stats_handle(bp
, STATS_EVENT_LINK_UP
);
2596 if (bp
->link_vars
.link_up
&& bp
->link_vars
.line_speed
)
2597 bnx2x_set_local_cmng(bp
);
2599 __bnx2x_link_report(bp
);
2602 bnx2x_link_sync_notify(bp
);
2605 void bnx2x__link_status_update(struct bnx2x
*bp
)
2607 if (bp
->state
!= BNX2X_STATE_OPEN
)
2610 /* read updated dcb configuration */
2612 bnx2x_dcbx_pmf_update(bp
);
2613 bnx2x_link_status_update(&bp
->link_params
, &bp
->link_vars
);
2614 if (bp
->link_vars
.link_up
)
2615 bnx2x_stats_handle(bp
, STATS_EVENT_LINK_UP
);
2617 bnx2x_stats_handle(bp
, STATS_EVENT_STOP
);
2618 /* indicate link status */
2619 bnx2x_link_report(bp
);
2622 bp
->port
.supported
[0] |= (SUPPORTED_10baseT_Half
|
2623 SUPPORTED_10baseT_Full
|
2624 SUPPORTED_100baseT_Half
|
2625 SUPPORTED_100baseT_Full
|
2626 SUPPORTED_1000baseT_Full
|
2627 SUPPORTED_2500baseX_Full
|
2628 SUPPORTED_10000baseT_Full
|
2633 SUPPORTED_Asym_Pause
);
2634 bp
->port
.advertising
[0] = bp
->port
.supported
[0];
2636 bp
->link_params
.bp
= bp
;
2637 bp
->link_params
.port
= BP_PORT(bp
);
2638 bp
->link_params
.req_duplex
[0] = DUPLEX_FULL
;
2639 bp
->link_params
.req_flow_ctrl
[0] = BNX2X_FLOW_CTRL_NONE
;
2640 bp
->link_params
.req_line_speed
[0] = SPEED_10000
;
2641 bp
->link_params
.speed_cap_mask
[0] = 0x7f0000;
2642 bp
->link_params
.switch_cfg
= SWITCH_CFG_10G
;
2643 bp
->link_vars
.mac_type
= MAC_TYPE_BMAC
;
2644 bp
->link_vars
.line_speed
= SPEED_10000
;
2645 bp
->link_vars
.link_status
=
2646 (LINK_STATUS_LINK_UP
|
2647 LINK_STATUS_SPEED_AND_DUPLEX_10GTFD
);
2648 bp
->link_vars
.link_up
= 1;
2649 bp
->link_vars
.duplex
= DUPLEX_FULL
;
2650 bp
->link_vars
.flow_ctrl
= BNX2X_FLOW_CTRL_NONE
;
2651 __bnx2x_link_report(bp
);
2652 bnx2x_stats_handle(bp
, STATS_EVENT_LINK_UP
);
2656 static int bnx2x_afex_func_update(struct bnx2x
*bp
, u16 vifid
,
2657 u16 vlan_val
, u8 allowed_prio
)
2659 struct bnx2x_func_state_params func_params
= {NULL
};
2660 struct bnx2x_func_afex_update_params
*f_update_params
=
2661 &func_params
.params
.afex_update
;
2663 func_params
.f_obj
= &bp
->func_obj
;
2664 func_params
.cmd
= BNX2X_F_CMD_AFEX_UPDATE
;
2666 /* no need to wait for RAMROD completion, so don't
2667 * set RAMROD_COMP_WAIT flag
2670 f_update_params
->vif_id
= vifid
;
2671 f_update_params
->afex_default_vlan
= vlan_val
;
2672 f_update_params
->allowed_priorities
= allowed_prio
;
2674 /* if ramrod can not be sent, response to MCP immediately */
2675 if (bnx2x_func_state_change(bp
, &func_params
) < 0)
2676 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_VIFSET_ACK
, 0);
2681 static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x
*bp
, u8 cmd_type
,
2682 u16 vif_index
, u8 func_bit_map
)
2684 struct bnx2x_func_state_params func_params
= {NULL
};
2685 struct bnx2x_func_afex_viflists_params
*update_params
=
2686 &func_params
.params
.afex_viflists
;
2690 /* validate only LIST_SET and LIST_GET are received from switch */
2691 if ((cmd_type
!= VIF_LIST_RULE_GET
) && (cmd_type
!= VIF_LIST_RULE_SET
))
2692 BNX2X_ERR("BUG! afex_handle_vif_list_cmd invalid type 0x%x\n",
2695 func_params
.f_obj
= &bp
->func_obj
;
2696 func_params
.cmd
= BNX2X_F_CMD_AFEX_VIFLISTS
;
2698 /* set parameters according to cmd_type */
2699 update_params
->afex_vif_list_command
= cmd_type
;
2700 update_params
->vif_list_index
= vif_index
;
2701 update_params
->func_bit_map
=
2702 (cmd_type
== VIF_LIST_RULE_GET
) ? 0 : func_bit_map
;
2703 update_params
->func_to_clear
= 0;
2705 (cmd_type
== VIF_LIST_RULE_GET
) ?
2706 DRV_MSG_CODE_AFEX_LISTGET_ACK
:
2707 DRV_MSG_CODE_AFEX_LISTSET_ACK
;
2709 /* if ramrod can not be sent, respond to MCP immediately for
2710 * SET and GET requests (other are not triggered from MCP)
2712 rc
= bnx2x_func_state_change(bp
, &func_params
);
2714 bnx2x_fw_command(bp
, drv_msg_code
, 0);
2719 static void bnx2x_handle_afex_cmd(struct bnx2x
*bp
, u32 cmd
)
2721 struct afex_stats afex_stats
;
2722 u32 func
= BP_ABS_FUNC(bp
);
2729 u32 addr_to_write
, vifid
, addrs
, stats_type
, i
;
2731 if (cmd
& DRV_STATUS_AFEX_LISTGET_REQ
) {
2732 vifid
= SHMEM2_RD(bp
, afex_param1_to_driver
[BP_FW_MB_IDX(bp
)]);
2734 "afex: got MCP req LISTGET_REQ for vifid 0x%x\n", vifid
);
2735 bnx2x_afex_handle_vif_list_cmd(bp
, VIF_LIST_RULE_GET
, vifid
, 0);
2738 if (cmd
& DRV_STATUS_AFEX_LISTSET_REQ
) {
2739 vifid
= SHMEM2_RD(bp
, afex_param1_to_driver
[BP_FW_MB_IDX(bp
)]);
2740 addrs
= SHMEM2_RD(bp
, afex_param2_to_driver
[BP_FW_MB_IDX(bp
)]);
2742 "afex: got MCP req LISTSET_REQ for vifid 0x%x addrs 0x%x\n",
2744 bnx2x_afex_handle_vif_list_cmd(bp
, VIF_LIST_RULE_SET
, vifid
,
2748 if (cmd
& DRV_STATUS_AFEX_STATSGET_REQ
) {
2749 addr_to_write
= SHMEM2_RD(bp
,
2750 afex_scratchpad_addr_to_write
[BP_FW_MB_IDX(bp
)]);
2751 stats_type
= SHMEM2_RD(bp
,
2752 afex_param1_to_driver
[BP_FW_MB_IDX(bp
)]);
2755 "afex: got MCP req STATSGET_REQ, write to addr 0x%x\n",
2758 bnx2x_afex_collect_stats(bp
, (void *)&afex_stats
, stats_type
);
2760 /* write response to scratchpad, for MCP */
2761 for (i
= 0; i
< (sizeof(struct afex_stats
)/sizeof(u32
)); i
++)
2762 REG_WR(bp
, addr_to_write
+ i
*sizeof(u32
),
2763 *(((u32
*)(&afex_stats
))+i
));
2765 /* send ack message to MCP */
2766 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_STATSGET_ACK
, 0);
2769 if (cmd
& DRV_STATUS_AFEX_VIFSET_REQ
) {
2770 mf_config
= MF_CFG_RD(bp
, func_mf_config
[func
].config
);
2771 bp
->mf_config
[BP_VN(bp
)] = mf_config
;
2773 "afex: got MCP req VIFSET_REQ, mf_config 0x%x\n",
2776 /* if VIF_SET is "enabled" */
2777 if (!(mf_config
& FUNC_MF_CFG_FUNC_DISABLED
)) {
2778 /* set rate limit directly to internal RAM */
2779 struct cmng_init_input cmng_input
;
2780 struct rate_shaping_vars_per_vn m_rs_vn
;
2781 size_t size
= sizeof(struct rate_shaping_vars_per_vn
);
2782 u32 addr
= BAR_XSTRORM_INTMEM
+
2783 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(BP_FUNC(bp
));
2785 bp
->mf_config
[BP_VN(bp
)] = mf_config
;
2787 bnx2x_calc_vn_max(bp
, BP_VN(bp
), &cmng_input
);
2788 m_rs_vn
.vn_counter
.rate
=
2789 cmng_input
.vnic_max_rate
[BP_VN(bp
)];
2790 m_rs_vn
.vn_counter
.quota
=
2791 (m_rs_vn
.vn_counter
.rate
*
2792 RS_PERIODIC_TIMEOUT_USEC
) / 8;
2794 __storm_memset_struct(bp
, addr
, size
, (u32
*)&m_rs_vn
);
2796 /* read relevant values from mf_cfg struct in shmem */
2798 (MF_CFG_RD(bp
, func_mf_config
[func
].e1hov_tag
) &
2799 FUNC_MF_CFG_E1HOV_TAG_MASK
) >>
2800 FUNC_MF_CFG_E1HOV_TAG_SHIFT
;
2802 (MF_CFG_RD(bp
, func_mf_config
[func
].e1hov_tag
) &
2803 FUNC_MF_CFG_AFEX_VLAN_MASK
) >>
2804 FUNC_MF_CFG_AFEX_VLAN_SHIFT
;
2805 vlan_prio
= (mf_config
&
2806 FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK
) >>
2807 FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT
;
2808 vlan_val
|= (vlan_prio
<< VLAN_PRIO_SHIFT
);
2811 func_mf_config
[func
].afex_config
) &
2812 FUNC_MF_CFG_AFEX_VLAN_MODE_MASK
) >>
2813 FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT
;
2816 func_mf_config
[func
].afex_config
) &
2817 FUNC_MF_CFG_AFEX_COS_FILTER_MASK
) >>
2818 FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT
;
2820 /* send ramrod to FW, return in case of failure */
2821 if (bnx2x_afex_func_update(bp
, vif_id
, vlan_val
,
2825 bp
->afex_def_vlan_tag
= vlan_val
;
2826 bp
->afex_vlan_mode
= vlan_mode
;
2828 /* notify link down because BP->flags is disabled */
2829 bnx2x_link_report(bp
);
2831 /* send INVALID VIF ramrod to FW */
2832 bnx2x_afex_func_update(bp
, 0xFFFF, 0, 0);
2834 /* Reset the default afex VLAN */
2835 bp
->afex_def_vlan_tag
= -1;
2840 static void bnx2x_pmf_update(struct bnx2x
*bp
)
2842 int port
= BP_PORT(bp
);
2846 DP(BNX2X_MSG_MCP
, "pmf %d\n", bp
->port
.pmf
);
2849 * We need the mb() to ensure the ordering between the writing to
2850 * bp->port.pmf here and reading it from the bnx2x_periodic_task().
2854 /* queue a periodic task */
2855 queue_delayed_work(bnx2x_wq
, &bp
->period_task
, 0);
2857 bnx2x_dcbx_pmf_update(bp
);
2859 /* enable nig attention */
2860 val
= (0xff0f | (1 << (BP_VN(bp
) + 4)));
2861 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
2862 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, val
);
2863 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, val
);
2864 } else if (!CHIP_IS_E1x(bp
)) {
2865 REG_WR(bp
, IGU_REG_TRAILING_EDGE_LATCH
, val
);
2866 REG_WR(bp
, IGU_REG_LEADING_EDGE_LATCH
, val
);
2869 bnx2x_stats_handle(bp
, STATS_EVENT_PMF
);
2877 * General service functions
2880 /* send the MCP a request, block until there is a reply */
2881 u32
bnx2x_fw_command(struct bnx2x
*bp
, u32 command
, u32 param
)
2883 int mb_idx
= BP_FW_MB_IDX(bp
);
2887 u8 delay
= CHIP_REV_IS_SLOW(bp
) ? 100 : 10;
2889 mutex_lock(&bp
->fw_mb_mutex
);
2891 SHMEM_WR(bp
, func_mb
[mb_idx
].drv_mb_param
, param
);
2892 SHMEM_WR(bp
, func_mb
[mb_idx
].drv_mb_header
, (command
| seq
));
2894 DP(BNX2X_MSG_MCP
, "wrote command (%x) to FW MB param 0x%08x\n",
2895 (command
| seq
), param
);
2898 /* let the FW do it's magic ... */
2901 rc
= SHMEM_RD(bp
, func_mb
[mb_idx
].fw_mb_header
);
2903 /* Give the FW up to 5 second (500*10ms) */
2904 } while ((seq
!= (rc
& FW_MSG_SEQ_NUMBER_MASK
)) && (cnt
++ < 500));
2906 DP(BNX2X_MSG_MCP
, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
2907 cnt
*delay
, rc
, seq
);
2909 /* is this a reply to our command? */
2910 if (seq
== (rc
& FW_MSG_SEQ_NUMBER_MASK
))
2911 rc
&= FW_MSG_CODE_MASK
;
2914 BNX2X_ERR("FW failed to respond!\n");
2918 mutex_unlock(&bp
->fw_mb_mutex
);
2923 static void storm_memset_func_cfg(struct bnx2x
*bp
,
2924 struct tstorm_eth_function_common_config
*tcfg
,
2927 size_t size
= sizeof(struct tstorm_eth_function_common_config
);
2929 u32 addr
= BAR_TSTRORM_INTMEM
+
2930 TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid
);
2932 __storm_memset_struct(bp
, addr
, size
, (u32
*)tcfg
);
2935 void bnx2x_func_init(struct bnx2x
*bp
, struct bnx2x_func_init_params
*p
)
2937 if (CHIP_IS_E1x(bp
)) {
2938 struct tstorm_eth_function_common_config tcfg
= {0};
2940 storm_memset_func_cfg(bp
, &tcfg
, p
->func_id
);
2943 /* Enable the function in the FW */
2944 storm_memset_vf_to_pf(bp
, p
->func_id
, p
->pf_id
);
2945 storm_memset_func_en(bp
, p
->func_id
, 1);
2948 if (p
->func_flgs
& FUNC_FLG_SPQ
) {
2949 storm_memset_spq_addr(bp
, p
->spq_map
, p
->func_id
);
2950 REG_WR(bp
, XSEM_REG_FAST_MEMORY
+
2951 XSTORM_SPQ_PROD_OFFSET(p
->func_id
), p
->spq_prod
);
2956 * bnx2x_get_common_flags - Return common flags
2960 * @zero_stats TRUE if statistics zeroing is needed
2962 * Return the flags that are common for the Tx-only and not normal connections.
2964 static unsigned long bnx2x_get_common_flags(struct bnx2x
*bp
,
2965 struct bnx2x_fastpath
*fp
,
2968 unsigned long flags
= 0;
2970 /* PF driver will always initialize the Queue to an ACTIVE state */
2971 __set_bit(BNX2X_Q_FLG_ACTIVE
, &flags
);
2973 /* tx only connections collect statistics (on the same index as the
2974 * parent connection). The statistics are zeroed when the parent
2975 * connection is initialized.
2978 __set_bit(BNX2X_Q_FLG_STATS
, &flags
);
2980 __set_bit(BNX2X_Q_FLG_ZERO_STATS
, &flags
);
2982 __set_bit(BNX2X_Q_FLG_PCSUM_ON_PKT
, &flags
);
2983 __set_bit(BNX2X_Q_FLG_TUN_INC_INNER_IP_ID
, &flags
);
2985 #ifdef BNX2X_STOP_ON_ERROR
2986 __set_bit(BNX2X_Q_FLG_TX_SEC
, &flags
);
2992 static unsigned long bnx2x_get_q_flags(struct bnx2x
*bp
,
2993 struct bnx2x_fastpath
*fp
,
2996 unsigned long flags
= 0;
2998 /* calculate other queue flags */
3000 __set_bit(BNX2X_Q_FLG_OV
, &flags
);
3002 if (IS_FCOE_FP(fp
)) {
3003 __set_bit(BNX2X_Q_FLG_FCOE
, &flags
);
3004 /* For FCoE - force usage of default priority (for afex) */
3005 __set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI
, &flags
);
3008 if (!fp
->disable_tpa
) {
3009 __set_bit(BNX2X_Q_FLG_TPA
, &flags
);
3010 __set_bit(BNX2X_Q_FLG_TPA_IPV6
, &flags
);
3011 if (fp
->mode
== TPA_MODE_GRO
)
3012 __set_bit(BNX2X_Q_FLG_TPA_GRO
, &flags
);
3016 __set_bit(BNX2X_Q_FLG_LEADING_RSS
, &flags
);
3017 __set_bit(BNX2X_Q_FLG_MCAST
, &flags
);
3020 /* Always set HW VLAN stripping */
3021 __set_bit(BNX2X_Q_FLG_VLAN
, &flags
);
3023 /* configure silent vlan removal */
3025 __set_bit(BNX2X_Q_FLG_SILENT_VLAN_REM
, &flags
);
3027 return flags
| bnx2x_get_common_flags(bp
, fp
, true);
3030 static void bnx2x_pf_q_prep_general(struct bnx2x
*bp
,
3031 struct bnx2x_fastpath
*fp
, struct bnx2x_general_setup_params
*gen_init
,
3034 gen_init
->stat_id
= bnx2x_stats_id(fp
);
3035 gen_init
->spcl_id
= fp
->cl_id
;
3037 /* Always use mini-jumbo MTU for FCoE L2 ring */
3039 gen_init
->mtu
= BNX2X_FCOE_MINI_JUMBO_MTU
;
3041 gen_init
->mtu
= bp
->dev
->mtu
;
3043 gen_init
->cos
= cos
;
3046 static void bnx2x_pf_rx_q_prep(struct bnx2x
*bp
,
3047 struct bnx2x_fastpath
*fp
, struct rxq_pause_params
*pause
,
3048 struct bnx2x_rxq_setup_params
*rxq_init
)
3052 u16 tpa_agg_size
= 0;
3054 if (!fp
->disable_tpa
) {
3055 pause
->sge_th_lo
= SGE_TH_LO(bp
);
3056 pause
->sge_th_hi
= SGE_TH_HI(bp
);
3058 /* validate SGE ring has enough to cross high threshold */
3059 WARN_ON(bp
->dropless_fc
&&
3060 pause
->sge_th_hi
+ FW_PREFETCH_CNT
>
3061 MAX_RX_SGE_CNT
* NUM_RX_SGE_PAGES
);
3063 tpa_agg_size
= TPA_AGG_SIZE
;
3064 max_sge
= SGE_PAGE_ALIGN(bp
->dev
->mtu
) >>
3066 max_sge
= ((max_sge
+ PAGES_PER_SGE
- 1) &
3067 (~(PAGES_PER_SGE
-1))) >> PAGES_PER_SGE_SHIFT
;
3068 sge_sz
= (u16
)min_t(u32
, SGE_PAGES
, 0xffff);
3071 /* pause - not for e1 */
3072 if (!CHIP_IS_E1(bp
)) {
3073 pause
->bd_th_lo
= BD_TH_LO(bp
);
3074 pause
->bd_th_hi
= BD_TH_HI(bp
);
3076 pause
->rcq_th_lo
= RCQ_TH_LO(bp
);
3077 pause
->rcq_th_hi
= RCQ_TH_HI(bp
);
3079 * validate that rings have enough entries to cross
3082 WARN_ON(bp
->dropless_fc
&&
3083 pause
->bd_th_hi
+ FW_PREFETCH_CNT
>
3085 WARN_ON(bp
->dropless_fc
&&
3086 pause
->rcq_th_hi
+ FW_PREFETCH_CNT
>
3087 NUM_RCQ_RINGS
* MAX_RCQ_DESC_CNT
);
3093 rxq_init
->dscr_map
= fp
->rx_desc_mapping
;
3094 rxq_init
->sge_map
= fp
->rx_sge_mapping
;
3095 rxq_init
->rcq_map
= fp
->rx_comp_mapping
;
3096 rxq_init
->rcq_np_map
= fp
->rx_comp_mapping
+ BCM_PAGE_SIZE
;
3098 /* This should be a maximum number of data bytes that may be
3099 * placed on the BD (not including paddings).
3101 rxq_init
->buf_sz
= fp
->rx_buf_size
- BNX2X_FW_RX_ALIGN_START
-
3102 BNX2X_FW_RX_ALIGN_END
- IP_HEADER_ALIGNMENT_PADDING
;
3104 rxq_init
->cl_qzone_id
= fp
->cl_qzone_id
;
3105 rxq_init
->tpa_agg_sz
= tpa_agg_size
;
3106 rxq_init
->sge_buf_sz
= sge_sz
;
3107 rxq_init
->max_sges_pkt
= max_sge
;
3108 rxq_init
->rss_engine_id
= BP_FUNC(bp
);
3109 rxq_init
->mcast_engine_id
= BP_FUNC(bp
);
3111 /* Maximum number or simultaneous TPA aggregation for this Queue.
3113 * For PF Clients it should be the maximum available number.
3114 * VF driver(s) may want to define it to a smaller value.
3116 rxq_init
->max_tpa_queues
= MAX_AGG_QS(bp
);
3118 rxq_init
->cache_line_log
= BNX2X_RX_ALIGN_SHIFT
;
3119 rxq_init
->fw_sb_id
= fp
->fw_sb_id
;
3122 rxq_init
->sb_cq_index
= HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS
;
3124 rxq_init
->sb_cq_index
= HC_INDEX_ETH_RX_CQ_CONS
;
3125 /* configure silent vlan removal
3126 * if multi function mode is afex, then mask default vlan
3128 if (IS_MF_AFEX(bp
)) {
3129 rxq_init
->silent_removal_value
= bp
->afex_def_vlan_tag
;
3130 rxq_init
->silent_removal_mask
= VLAN_VID_MASK
;
3134 static void bnx2x_pf_tx_q_prep(struct bnx2x
*bp
,
3135 struct bnx2x_fastpath
*fp
, struct bnx2x_txq_setup_params
*txq_init
,
3138 txq_init
->dscr_map
= fp
->txdata_ptr
[cos
]->tx_desc_mapping
;
3139 txq_init
->sb_cq_index
= HC_INDEX_ETH_FIRST_TX_CQ_CONS
+ cos
;
3140 txq_init
->traffic_type
= LLFC_TRAFFIC_TYPE_NW
;
3141 txq_init
->fw_sb_id
= fp
->fw_sb_id
;
3144 * set the tss leading client id for TX classification ==
3145 * leading RSS client id
3147 txq_init
->tss_leading_cl_id
= bnx2x_fp(bp
, 0, cl_id
);
3149 if (IS_FCOE_FP(fp
)) {
3150 txq_init
->sb_cq_index
= HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS
;
3151 txq_init
->traffic_type
= LLFC_TRAFFIC_TYPE_FCOE
;
3155 static void bnx2x_pf_init(struct bnx2x
*bp
)
3157 struct bnx2x_func_init_params func_init
= {0};
3158 struct event_ring_data eq_data
= { {0} };
3161 if (!CHIP_IS_E1x(bp
)) {
3162 /* reset IGU PF statistics: MSIX + ATTN */
3164 REG_WR(bp
, IGU_REG_STATISTIC_NUM_MESSAGE_SENT
+
3165 BNX2X_IGU_STAS_MSG_VF_CNT
*4 +
3166 (CHIP_MODE_IS_4_PORT(bp
) ?
3167 BP_FUNC(bp
) : BP_VN(bp
))*4, 0);
3169 REG_WR(bp
, IGU_REG_STATISTIC_NUM_MESSAGE_SENT
+
3170 BNX2X_IGU_STAS_MSG_VF_CNT
*4 +
3171 BNX2X_IGU_STAS_MSG_PF_CNT
*4 +
3172 (CHIP_MODE_IS_4_PORT(bp
) ?
3173 BP_FUNC(bp
) : BP_VN(bp
))*4, 0);
3176 /* function setup flags */
3177 flags
= (FUNC_FLG_STATS
| FUNC_FLG_LEADING
| FUNC_FLG_SPQ
);
3179 /* This flag is relevant for E1x only.
3180 * E2 doesn't have a TPA configuration in a function level.
3182 flags
|= (bp
->flags
& TPA_ENABLE_FLAG
) ? FUNC_FLG_TPA
: 0;
3184 func_init
.func_flgs
= flags
;
3185 func_init
.pf_id
= BP_FUNC(bp
);
3186 func_init
.func_id
= BP_FUNC(bp
);
3187 func_init
.spq_map
= bp
->spq_mapping
;
3188 func_init
.spq_prod
= bp
->spq_prod_idx
;
3190 bnx2x_func_init(bp
, &func_init
);
3192 memset(&(bp
->cmng
), 0, sizeof(struct cmng_struct_per_port
));
3195 * Congestion management values depend on the link rate
3196 * There is no active link so initial link rate is set to 10 Gbps.
3197 * When the link comes up The congestion management values are
3198 * re-calculated according to the actual link rate.
3200 bp
->link_vars
.line_speed
= SPEED_10000
;
3201 bnx2x_cmng_fns_init(bp
, true, bnx2x_get_cmng_fns_mode(bp
));
3203 /* Only the PMF sets the HW */
3205 storm_memset_cmng(bp
, &bp
->cmng
, BP_PORT(bp
));
3207 /* init Event Queue - PCI bus guarantees correct endianity*/
3208 eq_data
.base_addr
.hi
= U64_HI(bp
->eq_mapping
);
3209 eq_data
.base_addr
.lo
= U64_LO(bp
->eq_mapping
);
3210 eq_data
.producer
= bp
->eq_prod
;
3211 eq_data
.index_id
= HC_SP_INDEX_EQ_CONS
;
3212 eq_data
.sb_id
= DEF_SB_ID
;
3213 storm_memset_eq_data(bp
, &eq_data
, BP_FUNC(bp
));
3216 static void bnx2x_e1h_disable(struct bnx2x
*bp
)
3218 int port
= BP_PORT(bp
);
3220 bnx2x_tx_disable(bp
);
3222 REG_WR(bp
, NIG_REG_LLH0_FUNC_EN
+ port
*8, 0);
3225 static void bnx2x_e1h_enable(struct bnx2x
*bp
)
3227 int port
= BP_PORT(bp
);
3229 REG_WR(bp
, NIG_REG_LLH0_FUNC_EN
+ port
*8, 1);
3231 /* Tx queue should be only re-enabled */
3232 netif_tx_wake_all_queues(bp
->dev
);
3235 * Should not call netif_carrier_on since it will be called if the link
3236 * is up when checking for link state
3240 #define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
3242 static void bnx2x_drv_info_ether_stat(struct bnx2x
*bp
)
3244 struct eth_stats_info
*ether_stat
=
3245 &bp
->slowpath
->drv_info_to_mcp
.ether_stat
;
3246 struct bnx2x_vlan_mac_obj
*mac_obj
=
3247 &bp
->sp_objs
->mac_obj
;
3250 strlcpy(ether_stat
->version
, DRV_MODULE_VERSION
,
3251 ETH_STAT_INFO_VERSION_LEN
);
3253 /* get DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED macs, placing them in the
3254 * mac_local field in ether_stat struct. The base address is offset by 2
3255 * bytes to account for the field being 8 bytes but a mac address is
3256 * only 6 bytes. Likewise, the stride for the get_n_elements function is
3257 * 2 bytes to compensate from the 6 bytes of a mac to the 8 bytes
3258 * allocated by the ether_stat struct, so the macs will land in their
3261 for (i
= 0; i
< DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED
; i
++)
3262 memset(ether_stat
->mac_local
+ i
, 0,
3263 sizeof(ether_stat
->mac_local
[0]));
3264 mac_obj
->get_n_elements(bp
, &bp
->sp_objs
[0].mac_obj
,
3265 DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED
,
3266 ether_stat
->mac_local
+ MAC_PAD
, MAC_PAD
,
3268 ether_stat
->mtu_size
= bp
->dev
->mtu
;
3269 if (bp
->dev
->features
& NETIF_F_RXCSUM
)
3270 ether_stat
->feature_flags
|= FEATURE_ETH_CHKSUM_OFFLOAD_MASK
;
3271 if (bp
->dev
->features
& NETIF_F_TSO
)
3272 ether_stat
->feature_flags
|= FEATURE_ETH_LSO_MASK
;
3273 ether_stat
->feature_flags
|= bp
->common
.boot_mode
;
3275 ether_stat
->promiscuous_mode
= (bp
->dev
->flags
& IFF_PROMISC
) ? 1 : 0;
3277 ether_stat
->txq_size
= bp
->tx_ring_size
;
3278 ether_stat
->rxq_size
= bp
->rx_ring_size
;
3281 static void bnx2x_drv_info_fcoe_stat(struct bnx2x
*bp
)
3283 struct bnx2x_dcbx_app_params
*app
= &bp
->dcbx_port_params
.app
;
3284 struct fcoe_stats_info
*fcoe_stat
=
3285 &bp
->slowpath
->drv_info_to_mcp
.fcoe_stat
;
3287 if (!CNIC_LOADED(bp
))
3290 memcpy(fcoe_stat
->mac_local
+ MAC_PAD
, bp
->fip_mac
, ETH_ALEN
);
3292 fcoe_stat
->qos_priority
=
3293 app
->traffic_type_priority
[LLFC_TRAFFIC_TYPE_FCOE
];
3295 /* insert FCoE stats from ramrod response */
3297 struct tstorm_per_queue_stats
*fcoe_q_tstorm_stats
=
3298 &bp
->fw_stats_data
->queue_stats
[FCOE_IDX(bp
)].
3299 tstorm_queue_statistics
;
3301 struct xstorm_per_queue_stats
*fcoe_q_xstorm_stats
=
3302 &bp
->fw_stats_data
->queue_stats
[FCOE_IDX(bp
)].
3303 xstorm_queue_statistics
;
3305 struct fcoe_statistics_params
*fw_fcoe_stat
=
3306 &bp
->fw_stats_data
->fcoe
;
3308 ADD_64_LE(fcoe_stat
->rx_bytes_hi
, LE32_0
,
3309 fcoe_stat
->rx_bytes_lo
,
3310 fw_fcoe_stat
->rx_stat0
.fcoe_rx_byte_cnt
);
3312 ADD_64_LE(fcoe_stat
->rx_bytes_hi
,
3313 fcoe_q_tstorm_stats
->rcv_ucast_bytes
.hi
,
3314 fcoe_stat
->rx_bytes_lo
,
3315 fcoe_q_tstorm_stats
->rcv_ucast_bytes
.lo
);
3317 ADD_64_LE(fcoe_stat
->rx_bytes_hi
,
3318 fcoe_q_tstorm_stats
->rcv_bcast_bytes
.hi
,
3319 fcoe_stat
->rx_bytes_lo
,
3320 fcoe_q_tstorm_stats
->rcv_bcast_bytes
.lo
);
3322 ADD_64_LE(fcoe_stat
->rx_bytes_hi
,
3323 fcoe_q_tstorm_stats
->rcv_mcast_bytes
.hi
,
3324 fcoe_stat
->rx_bytes_lo
,
3325 fcoe_q_tstorm_stats
->rcv_mcast_bytes
.lo
);
3327 ADD_64_LE(fcoe_stat
->rx_frames_hi
, LE32_0
,
3328 fcoe_stat
->rx_frames_lo
,
3329 fw_fcoe_stat
->rx_stat0
.fcoe_rx_pkt_cnt
);
3331 ADD_64_LE(fcoe_stat
->rx_frames_hi
, LE32_0
,
3332 fcoe_stat
->rx_frames_lo
,
3333 fcoe_q_tstorm_stats
->rcv_ucast_pkts
);
3335 ADD_64_LE(fcoe_stat
->rx_frames_hi
, LE32_0
,
3336 fcoe_stat
->rx_frames_lo
,
3337 fcoe_q_tstorm_stats
->rcv_bcast_pkts
);
3339 ADD_64_LE(fcoe_stat
->rx_frames_hi
, LE32_0
,
3340 fcoe_stat
->rx_frames_lo
,
3341 fcoe_q_tstorm_stats
->rcv_mcast_pkts
);
3343 ADD_64_LE(fcoe_stat
->tx_bytes_hi
, LE32_0
,
3344 fcoe_stat
->tx_bytes_lo
,
3345 fw_fcoe_stat
->tx_stat
.fcoe_tx_byte_cnt
);
3347 ADD_64_LE(fcoe_stat
->tx_bytes_hi
,
3348 fcoe_q_xstorm_stats
->ucast_bytes_sent
.hi
,
3349 fcoe_stat
->tx_bytes_lo
,
3350 fcoe_q_xstorm_stats
->ucast_bytes_sent
.lo
);
3352 ADD_64_LE(fcoe_stat
->tx_bytes_hi
,
3353 fcoe_q_xstorm_stats
->bcast_bytes_sent
.hi
,
3354 fcoe_stat
->tx_bytes_lo
,
3355 fcoe_q_xstorm_stats
->bcast_bytes_sent
.lo
);
3357 ADD_64_LE(fcoe_stat
->tx_bytes_hi
,
3358 fcoe_q_xstorm_stats
->mcast_bytes_sent
.hi
,
3359 fcoe_stat
->tx_bytes_lo
,
3360 fcoe_q_xstorm_stats
->mcast_bytes_sent
.lo
);
3362 ADD_64_LE(fcoe_stat
->tx_frames_hi
, LE32_0
,
3363 fcoe_stat
->tx_frames_lo
,
3364 fw_fcoe_stat
->tx_stat
.fcoe_tx_pkt_cnt
);
3366 ADD_64_LE(fcoe_stat
->tx_frames_hi
, LE32_0
,
3367 fcoe_stat
->tx_frames_lo
,
3368 fcoe_q_xstorm_stats
->ucast_pkts_sent
);
3370 ADD_64_LE(fcoe_stat
->tx_frames_hi
, LE32_0
,
3371 fcoe_stat
->tx_frames_lo
,
3372 fcoe_q_xstorm_stats
->bcast_pkts_sent
);
3374 ADD_64_LE(fcoe_stat
->tx_frames_hi
, LE32_0
,
3375 fcoe_stat
->tx_frames_lo
,
3376 fcoe_q_xstorm_stats
->mcast_pkts_sent
);
3379 /* ask L5 driver to add data to the struct */
3380 bnx2x_cnic_notify(bp
, CNIC_CTL_FCOE_STATS_GET_CMD
);
3383 static void bnx2x_drv_info_iscsi_stat(struct bnx2x
*bp
)
3385 struct bnx2x_dcbx_app_params
*app
= &bp
->dcbx_port_params
.app
;
3386 struct iscsi_stats_info
*iscsi_stat
=
3387 &bp
->slowpath
->drv_info_to_mcp
.iscsi_stat
;
3389 if (!CNIC_LOADED(bp
))
3392 memcpy(iscsi_stat
->mac_local
+ MAC_PAD
, bp
->cnic_eth_dev
.iscsi_mac
,
3395 iscsi_stat
->qos_priority
=
3396 app
->traffic_type_priority
[LLFC_TRAFFIC_TYPE_ISCSI
];
3398 /* ask L5 driver to add data to the struct */
3399 bnx2x_cnic_notify(bp
, CNIC_CTL_ISCSI_STATS_GET_CMD
);
3402 /* called due to MCP event (on pmf):
3403 * reread new bandwidth configuration
3405 * notify others function about the change
3407 static void bnx2x_config_mf_bw(struct bnx2x
*bp
)
3409 if (bp
->link_vars
.link_up
) {
3410 bnx2x_cmng_fns_init(bp
, true, CMNG_FNS_MINMAX
);
3411 bnx2x_link_sync_notify(bp
);
3413 storm_memset_cmng(bp
, &bp
->cmng
, BP_PORT(bp
));
3416 static void bnx2x_set_mf_bw(struct bnx2x
*bp
)
3418 bnx2x_config_mf_bw(bp
);
3419 bnx2x_fw_command(bp
, DRV_MSG_CODE_SET_MF_BW_ACK
, 0);
3422 static void bnx2x_handle_eee_event(struct bnx2x
*bp
)
3424 DP(BNX2X_MSG_MCP
, "EEE - LLDP event\n");
3425 bnx2x_fw_command(bp
, DRV_MSG_CODE_EEE_RESULTS_ACK
, 0);
3428 static void bnx2x_handle_drv_info_req(struct bnx2x
*bp
)
3430 enum drv_info_opcode op_code
;
3431 u32 drv_info_ctl
= SHMEM2_RD(bp
, drv_info_control
);
3433 /* if drv_info version supported by MFW doesn't match - send NACK */
3434 if ((drv_info_ctl
& DRV_INFO_CONTROL_VER_MASK
) != DRV_INFO_CUR_VER
) {
3435 bnx2x_fw_command(bp
, DRV_MSG_CODE_DRV_INFO_NACK
, 0);
3439 op_code
= (drv_info_ctl
& DRV_INFO_CONTROL_OP_CODE_MASK
) >>
3440 DRV_INFO_CONTROL_OP_CODE_SHIFT
;
3442 memset(&bp
->slowpath
->drv_info_to_mcp
, 0,
3443 sizeof(union drv_info_to_mcp
));
3446 case ETH_STATS_OPCODE
:
3447 bnx2x_drv_info_ether_stat(bp
);
3449 case FCOE_STATS_OPCODE
:
3450 bnx2x_drv_info_fcoe_stat(bp
);
3452 case ISCSI_STATS_OPCODE
:
3453 bnx2x_drv_info_iscsi_stat(bp
);
3456 /* if op code isn't supported - send NACK */
3457 bnx2x_fw_command(bp
, DRV_MSG_CODE_DRV_INFO_NACK
, 0);
3461 /* if we got drv_info attn from MFW then these fields are defined in
3464 SHMEM2_WR(bp
, drv_info_host_addr_lo
,
3465 U64_LO(bnx2x_sp_mapping(bp
, drv_info_to_mcp
)));
3466 SHMEM2_WR(bp
, drv_info_host_addr_hi
,
3467 U64_HI(bnx2x_sp_mapping(bp
, drv_info_to_mcp
)));
3469 bnx2x_fw_command(bp
, DRV_MSG_CODE_DRV_INFO_ACK
, 0);
3472 static void bnx2x_dcc_event(struct bnx2x
*bp
, u32 dcc_event
)
3474 DP(BNX2X_MSG_MCP
, "dcc_event 0x%x\n", dcc_event
);
3476 if (dcc_event
& DRV_STATUS_DCC_DISABLE_ENABLE_PF
) {
3479 * This is the only place besides the function initialization
3480 * where the bp->flags can change so it is done without any
3483 if (bp
->mf_config
[BP_VN(bp
)] & FUNC_MF_CFG_FUNC_DISABLED
) {
3484 DP(BNX2X_MSG_MCP
, "mf_cfg function disabled\n");
3485 bp
->flags
|= MF_FUNC_DIS
;
3487 bnx2x_e1h_disable(bp
);
3489 DP(BNX2X_MSG_MCP
, "mf_cfg function enabled\n");
3490 bp
->flags
&= ~MF_FUNC_DIS
;
3492 bnx2x_e1h_enable(bp
);
3494 dcc_event
&= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF
;
3496 if (dcc_event
& DRV_STATUS_DCC_BANDWIDTH_ALLOCATION
) {
3497 bnx2x_config_mf_bw(bp
);
3498 dcc_event
&= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION
;
3501 /* Report results to MCP */
3503 bnx2x_fw_command(bp
, DRV_MSG_CODE_DCC_FAILURE
, 0);
3505 bnx2x_fw_command(bp
, DRV_MSG_CODE_DCC_OK
, 0);
3508 /* must be called under the spq lock */
3509 static struct eth_spe
*bnx2x_sp_get_next(struct bnx2x
*bp
)
3511 struct eth_spe
*next_spe
= bp
->spq_prod_bd
;
3513 if (bp
->spq_prod_bd
== bp
->spq_last_bd
) {
3514 bp
->spq_prod_bd
= bp
->spq
;
3515 bp
->spq_prod_idx
= 0;
3516 DP(BNX2X_MSG_SP
, "end of spq\n");
3524 /* must be called under the spq lock */
3525 static void bnx2x_sp_prod_update(struct bnx2x
*bp
)
3527 int func
= BP_FUNC(bp
);
3530 * Make sure that BD data is updated before writing the producer:
3531 * BD data is written to the memory, the producer is read from the
3532 * memory, thus we need a full memory barrier to ensure the ordering.
3536 REG_WR16(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_SPQ_PROD_OFFSET(func
),
3542 * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
3544 * @cmd: command to check
3545 * @cmd_type: command type
3547 static bool bnx2x_is_contextless_ramrod(int cmd
, int cmd_type
)
3549 if ((cmd_type
== NONE_CONNECTION_TYPE
) ||
3550 (cmd
== RAMROD_CMD_ID_ETH_FORWARD_SETUP
) ||
3551 (cmd
== RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES
) ||
3552 (cmd
== RAMROD_CMD_ID_ETH_FILTER_RULES
) ||
3553 (cmd
== RAMROD_CMD_ID_ETH_MULTICAST_RULES
) ||
3554 (cmd
== RAMROD_CMD_ID_ETH_SET_MAC
) ||
3555 (cmd
== RAMROD_CMD_ID_ETH_RSS_UPDATE
))
3562 * bnx2x_sp_post - place a single command on an SP ring
3564 * @bp: driver handle
3565 * @command: command to place (e.g. SETUP, FILTER_RULES, etc.)
3566 * @cid: SW CID the command is related to
3567 * @data_hi: command private data address (high 32 bits)
3568 * @data_lo: command private data address (low 32 bits)
3569 * @cmd_type: command type (e.g. NONE, ETH)
3571 * SP data is handled as if it's always an address pair, thus data fields are
3572 * not swapped to little endian in upper functions. Instead this function swaps
3573 * data as if it's two u32 fields.
3575 int bnx2x_sp_post(struct bnx2x
*bp
, int command
, int cid
,
3576 u32 data_hi
, u32 data_lo
, int cmd_type
)
3578 struct eth_spe
*spe
;
3580 bool common
= bnx2x_is_contextless_ramrod(command
, cmd_type
);
3582 #ifdef BNX2X_STOP_ON_ERROR
3583 if (unlikely(bp
->panic
)) {
3584 BNX2X_ERR("Can't post SP when there is panic\n");
3589 spin_lock_bh(&bp
->spq_lock
);
3592 if (!atomic_read(&bp
->eq_spq_left
)) {
3593 BNX2X_ERR("BUG! EQ ring full!\n");
3594 spin_unlock_bh(&bp
->spq_lock
);
3598 } else if (!atomic_read(&bp
->cq_spq_left
)) {
3599 BNX2X_ERR("BUG! SPQ ring full!\n");
3600 spin_unlock_bh(&bp
->spq_lock
);
3605 spe
= bnx2x_sp_get_next(bp
);
3607 /* CID needs port number to be encoded int it */
3608 spe
->hdr
.conn_and_cmd_data
=
3609 cpu_to_le32((command
<< SPE_HDR_CMD_ID_SHIFT
) |
3612 type
= (cmd_type
<< SPE_HDR_CONN_TYPE_SHIFT
) & SPE_HDR_CONN_TYPE
;
3614 type
|= ((BP_FUNC(bp
) << SPE_HDR_FUNCTION_ID_SHIFT
) &
3615 SPE_HDR_FUNCTION_ID
);
3617 spe
->hdr
.type
= cpu_to_le16(type
);
3619 spe
->data
.update_data_addr
.hi
= cpu_to_le32(data_hi
);
3620 spe
->data
.update_data_addr
.lo
= cpu_to_le32(data_lo
);
3623 * It's ok if the actual decrement is issued towards the memory
3624 * somewhere between the spin_lock and spin_unlock. Thus no
3625 * more explicit memory barrier is needed.
3628 atomic_dec(&bp
->eq_spq_left
);
3630 atomic_dec(&bp
->cq_spq_left
);
3633 "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) type(0x%x) left (CQ, EQ) (%x,%x)\n",
3634 bp
->spq_prod_idx
, (u32
)U64_HI(bp
->spq_mapping
),
3635 (u32
)(U64_LO(bp
->spq_mapping
) +
3636 (void *)bp
->spq_prod_bd
- (void *)bp
->spq
), command
, common
,
3637 HW_CID(bp
, cid
), data_hi
, data_lo
, type
,
3638 atomic_read(&bp
->cq_spq_left
), atomic_read(&bp
->eq_spq_left
));
3640 bnx2x_sp_prod_update(bp
);
3641 spin_unlock_bh(&bp
->spq_lock
);
3645 /* acquire split MCP access lock register */
3646 static int bnx2x_acquire_alr(struct bnx2x
*bp
)
3652 for (j
= 0; j
< 1000; j
++) {
3653 REG_WR(bp
, MCP_REG_MCPR_ACCESS_LOCK
, MCPR_ACCESS_LOCK_LOCK
);
3654 val
= REG_RD(bp
, MCP_REG_MCPR_ACCESS_LOCK
);
3655 if (val
& MCPR_ACCESS_LOCK_LOCK
)
3658 usleep_range(5000, 10000);
3660 if (!(val
& MCPR_ACCESS_LOCK_LOCK
)) {
3661 BNX2X_ERR("Cannot acquire MCP access lock register\n");
3668 /* release split MCP access lock register */
3669 static void bnx2x_release_alr(struct bnx2x
*bp
)
3671 REG_WR(bp
, MCP_REG_MCPR_ACCESS_LOCK
, 0);
3674 #define BNX2X_DEF_SB_ATT_IDX 0x0001
3675 #define BNX2X_DEF_SB_IDX 0x0002
3677 static u16
bnx2x_update_dsb_idx(struct bnx2x
*bp
)
3679 struct host_sp_status_block
*def_sb
= bp
->def_status_blk
;
3682 barrier(); /* status block is written to by the chip */
3683 if (bp
->def_att_idx
!= def_sb
->atten_status_block
.attn_bits_index
) {
3684 bp
->def_att_idx
= def_sb
->atten_status_block
.attn_bits_index
;
3685 rc
|= BNX2X_DEF_SB_ATT_IDX
;
3688 if (bp
->def_idx
!= def_sb
->sp_sb
.running_index
) {
3689 bp
->def_idx
= def_sb
->sp_sb
.running_index
;
3690 rc
|= BNX2X_DEF_SB_IDX
;
3693 /* Do not reorder: indices reading should complete before handling */
3699 * slow path service functions
3702 static void bnx2x_attn_int_asserted(struct bnx2x
*bp
, u32 asserted
)
3704 int port
= BP_PORT(bp
);
3705 u32 aeu_addr
= port
? MISC_REG_AEU_MASK_ATTN_FUNC_1
:
3706 MISC_REG_AEU_MASK_ATTN_FUNC_0
;
3707 u32 nig_int_mask_addr
= port
? NIG_REG_MASK_INTERRUPT_PORT1
:
3708 NIG_REG_MASK_INTERRUPT_PORT0
;
3713 if (bp
->attn_state
& asserted
)
3714 BNX2X_ERR("IGU ERROR\n");
3716 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_PORT0_ATT_MASK
+ port
);
3717 aeu_mask
= REG_RD(bp
, aeu_addr
);
3719 DP(NETIF_MSG_HW
, "aeu_mask %x newly asserted %x\n",
3720 aeu_mask
, asserted
);
3721 aeu_mask
&= ~(asserted
& 0x3ff);
3722 DP(NETIF_MSG_HW
, "new mask %x\n", aeu_mask
);
3724 REG_WR(bp
, aeu_addr
, aeu_mask
);
3725 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_PORT0_ATT_MASK
+ port
);
3727 DP(NETIF_MSG_HW
, "attn_state %x\n", bp
->attn_state
);
3728 bp
->attn_state
|= asserted
;
3729 DP(NETIF_MSG_HW
, "new state %x\n", bp
->attn_state
);
3731 if (asserted
& ATTN_HARD_WIRED_MASK
) {
3732 if (asserted
& ATTN_NIG_FOR_FUNC
) {
3734 bnx2x_acquire_phy_lock(bp
);
3736 /* save nig interrupt mask */
3737 nig_mask
= REG_RD(bp
, nig_int_mask_addr
);
3739 /* If nig_mask is not set, no need to call the update
3743 REG_WR(bp
, nig_int_mask_addr
, 0);
3745 bnx2x_link_attn(bp
);
3748 /* handle unicore attn? */
3750 if (asserted
& ATTN_SW_TIMER_4_FUNC
)
3751 DP(NETIF_MSG_HW
, "ATTN_SW_TIMER_4_FUNC!\n");
3753 if (asserted
& GPIO_2_FUNC
)
3754 DP(NETIF_MSG_HW
, "GPIO_2_FUNC!\n");
3756 if (asserted
& GPIO_3_FUNC
)
3757 DP(NETIF_MSG_HW
, "GPIO_3_FUNC!\n");
3759 if (asserted
& GPIO_4_FUNC
)
3760 DP(NETIF_MSG_HW
, "GPIO_4_FUNC!\n");
3763 if (asserted
& ATTN_GENERAL_ATTN_1
) {
3764 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_1!\n");
3765 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_1
, 0x0);
3767 if (asserted
& ATTN_GENERAL_ATTN_2
) {
3768 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_2!\n");
3769 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_2
, 0x0);
3771 if (asserted
& ATTN_GENERAL_ATTN_3
) {
3772 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_3!\n");
3773 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_3
, 0x0);
3776 if (asserted
& ATTN_GENERAL_ATTN_4
) {
3777 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_4!\n");
3778 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_4
, 0x0);
3780 if (asserted
& ATTN_GENERAL_ATTN_5
) {
3781 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_5!\n");
3782 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_5
, 0x0);
3784 if (asserted
& ATTN_GENERAL_ATTN_6
) {
3785 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_6!\n");
3786 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_6
, 0x0);
3790 } /* if hardwired */
3792 if (bp
->common
.int_block
== INT_BLOCK_HC
)
3793 reg_addr
= (HC_REG_COMMAND_REG
+ port
*32 +
3794 COMMAND_REG_ATTN_BITS_SET
);
3796 reg_addr
= (BAR_IGU_INTMEM
+ IGU_CMD_ATTN_BIT_SET_UPPER
*8);
3798 DP(NETIF_MSG_HW
, "about to mask 0x%08x at %s addr 0x%x\n", asserted
,
3799 (bp
->common
.int_block
== INT_BLOCK_HC
) ? "HC" : "IGU", reg_addr
);
3800 REG_WR(bp
, reg_addr
, asserted
);
3802 /* now set back the mask */
3803 if (asserted
& ATTN_NIG_FOR_FUNC
) {
3804 /* Verify that IGU ack through BAR was written before restoring
3805 * NIG mask. This loop should exit after 2-3 iterations max.
3807 if (bp
->common
.int_block
!= INT_BLOCK_HC
) {
3808 u32 cnt
= 0, igu_acked
;
3810 igu_acked
= REG_RD(bp
,
3811 IGU_REG_ATTENTION_ACK_BITS
);
3812 } while (((igu_acked
& ATTN_NIG_FOR_FUNC
) == 0) &&
3813 (++cnt
< MAX_IGU_ATTN_ACK_TO
));
3816 "Failed to verify IGU ack on time\n");
3819 REG_WR(bp
, nig_int_mask_addr
, nig_mask
);
3820 bnx2x_release_phy_lock(bp
);
3824 static void bnx2x_fan_failure(struct bnx2x
*bp
)
3826 int port
= BP_PORT(bp
);
3828 /* mark the failure */
3831 dev_info
.port_hw_config
[port
].external_phy_config
);
3833 ext_phy_config
&= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK
;
3834 ext_phy_config
|= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE
;
3835 SHMEM_WR(bp
, dev_info
.port_hw_config
[port
].external_phy_config
,
3838 /* log the failure */
3839 netdev_err(bp
->dev
, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n"
3840 "Please contact OEM Support for assistance\n");
3842 /* Schedule device reset (unload)
3843 * This is due to some boards consuming sufficient power when driver is
3844 * up to overheat if fan fails.
3846 smp_mb__before_clear_bit();
3847 set_bit(BNX2X_SP_RTNL_FAN_FAILURE
, &bp
->sp_rtnl_state
);
3848 smp_mb__after_clear_bit();
3849 schedule_delayed_work(&bp
->sp_rtnl_task
, 0);
3852 static void bnx2x_attn_int_deasserted0(struct bnx2x
*bp
, u32 attn
)
3854 int port
= BP_PORT(bp
);
3858 reg_offset
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0
:
3859 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0
);
3861 if (attn
& AEU_INPUTS_ATTN_BITS_SPIO5
) {
3863 val
= REG_RD(bp
, reg_offset
);
3864 val
&= ~AEU_INPUTS_ATTN_BITS_SPIO5
;
3865 REG_WR(bp
, reg_offset
, val
);
3867 BNX2X_ERR("SPIO5 hw attention\n");
3869 /* Fan failure attention */
3870 bnx2x_hw_reset_phy(&bp
->link_params
);
3871 bnx2x_fan_failure(bp
);
3874 if ((attn
& bp
->link_vars
.aeu_int_mask
) && bp
->port
.pmf
) {
3875 bnx2x_acquire_phy_lock(bp
);
3876 bnx2x_handle_module_detect_int(&bp
->link_params
);
3877 bnx2x_release_phy_lock(bp
);
3880 if (attn
& HW_INTERRUT_ASSERT_SET_0
) {
3882 val
= REG_RD(bp
, reg_offset
);
3883 val
&= ~(attn
& HW_INTERRUT_ASSERT_SET_0
);
3884 REG_WR(bp
, reg_offset
, val
);
3886 BNX2X_ERR("FATAL HW block attention set0 0x%x\n",
3887 (u32
)(attn
& HW_INTERRUT_ASSERT_SET_0
));
3892 static void bnx2x_attn_int_deasserted1(struct bnx2x
*bp
, u32 attn
)
3896 if (attn
& AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT
) {
3898 val
= REG_RD(bp
, DORQ_REG_DORQ_INT_STS_CLR
);
3899 BNX2X_ERR("DB hw attention 0x%x\n", val
);
3900 /* DORQ discard attention */
3902 BNX2X_ERR("FATAL error from DORQ\n");
3905 if (attn
& HW_INTERRUT_ASSERT_SET_1
) {
3907 int port
= BP_PORT(bp
);
3910 reg_offset
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1
:
3911 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1
);
3913 val
= REG_RD(bp
, reg_offset
);
3914 val
&= ~(attn
& HW_INTERRUT_ASSERT_SET_1
);
3915 REG_WR(bp
, reg_offset
, val
);
3917 BNX2X_ERR("FATAL HW block attention set1 0x%x\n",
3918 (u32
)(attn
& HW_INTERRUT_ASSERT_SET_1
));
3923 static void bnx2x_attn_int_deasserted2(struct bnx2x
*bp
, u32 attn
)
3927 if (attn
& AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT
) {
3929 val
= REG_RD(bp
, CFC_REG_CFC_INT_STS_CLR
);
3930 BNX2X_ERR("CFC hw attention 0x%x\n", val
);
3931 /* CFC error attention */
3933 BNX2X_ERR("FATAL error from CFC\n");
3936 if (attn
& AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT
) {
3937 val
= REG_RD(bp
, PXP_REG_PXP_INT_STS_CLR_0
);
3938 BNX2X_ERR("PXP hw attention-0 0x%x\n", val
);
3939 /* RQ_USDMDP_FIFO_OVERFLOW */
3941 BNX2X_ERR("FATAL error from PXP\n");
3943 if (!CHIP_IS_E1x(bp
)) {
3944 val
= REG_RD(bp
, PXP_REG_PXP_INT_STS_CLR_1
);
3945 BNX2X_ERR("PXP hw attention-1 0x%x\n", val
);
3949 if (attn
& HW_INTERRUT_ASSERT_SET_2
) {
3951 int port
= BP_PORT(bp
);
3954 reg_offset
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2
:
3955 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2
);
3957 val
= REG_RD(bp
, reg_offset
);
3958 val
&= ~(attn
& HW_INTERRUT_ASSERT_SET_2
);
3959 REG_WR(bp
, reg_offset
, val
);
3961 BNX2X_ERR("FATAL HW block attention set2 0x%x\n",
3962 (u32
)(attn
& HW_INTERRUT_ASSERT_SET_2
));
3967 static void bnx2x_attn_int_deasserted3(struct bnx2x
*bp
, u32 attn
)
3971 if (attn
& EVEREST_GEN_ATTN_IN_USE_MASK
) {
3973 if (attn
& BNX2X_PMF_LINK_ASSERT
) {
3974 int func
= BP_FUNC(bp
);
3976 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_12
+ func
*4, 0);
3977 bnx2x_read_mf_cfg(bp
);
3978 bp
->mf_config
[BP_VN(bp
)] = MF_CFG_RD(bp
,
3979 func_mf_config
[BP_ABS_FUNC(bp
)].config
);
3981 func_mb
[BP_FW_MB_IDX(bp
)].drv_status
);
3982 if (val
& DRV_STATUS_DCC_EVENT_MASK
)
3984 (val
& DRV_STATUS_DCC_EVENT_MASK
));
3986 if (val
& DRV_STATUS_SET_MF_BW
)
3987 bnx2x_set_mf_bw(bp
);
3989 if (val
& DRV_STATUS_DRV_INFO_REQ
)
3990 bnx2x_handle_drv_info_req(bp
);
3992 if (val
& DRV_STATUS_VF_DISABLED
)
3993 bnx2x_vf_handle_flr_event(bp
);
3995 if ((bp
->port
.pmf
== 0) && (val
& DRV_STATUS_PMF
))
3996 bnx2x_pmf_update(bp
);
3999 (val
& DRV_STATUS_DCBX_NEGOTIATION_RESULTS
) &&
4000 bp
->dcbx_enabled
> 0)
4001 /* start dcbx state machine */
4002 bnx2x_dcbx_set_params(bp
,
4003 BNX2X_DCBX_STATE_NEG_RECEIVED
);
4004 if (val
& DRV_STATUS_AFEX_EVENT_MASK
)
4005 bnx2x_handle_afex_cmd(bp
,
4006 val
& DRV_STATUS_AFEX_EVENT_MASK
);
4007 if (val
& DRV_STATUS_EEE_NEGOTIATION_RESULTS
)
4008 bnx2x_handle_eee_event(bp
);
4009 if (bp
->link_vars
.periodic_flags
&
4010 PERIODIC_FLAGS_LINK_EVENT
) {
4011 /* sync with link */
4012 bnx2x_acquire_phy_lock(bp
);
4013 bp
->link_vars
.periodic_flags
&=
4014 ~PERIODIC_FLAGS_LINK_EVENT
;
4015 bnx2x_release_phy_lock(bp
);
4017 bnx2x_link_sync_notify(bp
);
4018 bnx2x_link_report(bp
);
4020 /* Always call it here: bnx2x_link_report() will
4021 * prevent the link indication duplication.
4023 bnx2x__link_status_update(bp
);
4024 } else if (attn
& BNX2X_MC_ASSERT_BITS
) {
4026 BNX2X_ERR("MC assert!\n");
4027 bnx2x_mc_assert(bp
);
4028 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_10
, 0);
4029 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_9
, 0);
4030 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_8
, 0);
4031 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_7
, 0);
4034 } else if (attn
& BNX2X_MCP_ASSERT
) {
4036 BNX2X_ERR("MCP assert!\n");
4037 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_11
, 0);
4041 BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn
);
4044 if (attn
& EVEREST_LATCHED_ATTN_IN_USE_MASK
) {
4045 BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn
);
4046 if (attn
& BNX2X_GRC_TIMEOUT
) {
4047 val
= CHIP_IS_E1(bp
) ? 0 :
4048 REG_RD(bp
, MISC_REG_GRC_TIMEOUT_ATTN
);
4049 BNX2X_ERR("GRC time-out 0x%08x\n", val
);
4051 if (attn
& BNX2X_GRC_RSV
) {
4052 val
= CHIP_IS_E1(bp
) ? 0 :
4053 REG_RD(bp
, MISC_REG_GRC_RSV_ATTN
);
4054 BNX2X_ERR("GRC reserved 0x%08x\n", val
);
4056 REG_WR(bp
, MISC_REG_AEU_CLR_LATCH_SIGNAL
, 0x7ff);
4062 * 0-7 - Engine0 load counter.
4063 * 8-15 - Engine1 load counter.
4064 * 16 - Engine0 RESET_IN_PROGRESS bit.
4065 * 17 - Engine1 RESET_IN_PROGRESS bit.
4066 * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active function
4068 * 19 - Engine1 ONE_IS_LOADED.
4069 * 20 - Chip reset flow bit. When set none-leader must wait for both engines
4070 * leader to complete (check for both RESET_IN_PROGRESS bits and not for
4071 * just the one belonging to its engine).
4074 #define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1
4076 #define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff
4077 #define BNX2X_PATH0_LOAD_CNT_SHIFT 0
4078 #define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00
4079 #define BNX2X_PATH1_LOAD_CNT_SHIFT 8
4080 #define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
4081 #define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
4082 #define BNX2X_GLOBAL_RESET_BIT 0x00040000
4085 * Set the GLOBAL_RESET bit.
4087 * Should be run under rtnl lock
4089 void bnx2x_set_reset_global(struct bnx2x
*bp
)
4092 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4093 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4094 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
| BNX2X_GLOBAL_RESET_BIT
);
4095 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4099 * Clear the GLOBAL_RESET bit.
4101 * Should be run under rtnl lock
4103 static void bnx2x_clear_reset_global(struct bnx2x
*bp
)
4106 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4107 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4108 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
& (~BNX2X_GLOBAL_RESET_BIT
));
4109 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4113 * Checks the GLOBAL_RESET bit.
4115 * should be run under rtnl lock
4117 static bool bnx2x_reset_is_global(struct bnx2x
*bp
)
4119 u32 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4121 DP(NETIF_MSG_HW
, "GEN_REG_VAL=0x%08x\n", val
);
4122 return (val
& BNX2X_GLOBAL_RESET_BIT
) ? true : false;
4126 * Clear RESET_IN_PROGRESS bit for the current engine.
4128 * Should be run under rtnl lock
4130 static void bnx2x_set_reset_done(struct bnx2x
*bp
)
4133 u32 bit
= BP_PATH(bp
) ?
4134 BNX2X_PATH1_RST_IN_PROG_BIT
: BNX2X_PATH0_RST_IN_PROG_BIT
;
4135 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4136 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4140 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
);
4142 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4146 * Set RESET_IN_PROGRESS for the current engine.
4148 * should be run under rtnl lock
4150 void bnx2x_set_reset_in_progress(struct bnx2x
*bp
)
4153 u32 bit
= BP_PATH(bp
) ?
4154 BNX2X_PATH1_RST_IN_PROG_BIT
: BNX2X_PATH0_RST_IN_PROG_BIT
;
4155 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4156 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4160 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
);
4161 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4165 * Checks the RESET_IN_PROGRESS bit for the given engine.
4166 * should be run under rtnl lock
4168 bool bnx2x_reset_is_done(struct bnx2x
*bp
, int engine
)
4170 u32 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4172 BNX2X_PATH1_RST_IN_PROG_BIT
: BNX2X_PATH0_RST_IN_PROG_BIT
;
4174 /* return false if bit is set */
4175 return (val
& bit
) ? false : true;
4179 * set pf load for the current pf.
4181 * should be run under rtnl lock
4183 void bnx2x_set_pf_load(struct bnx2x
*bp
)
4186 u32 mask
= BP_PATH(bp
) ? BNX2X_PATH1_LOAD_CNT_MASK
:
4187 BNX2X_PATH0_LOAD_CNT_MASK
;
4188 u32 shift
= BP_PATH(bp
) ? BNX2X_PATH1_LOAD_CNT_SHIFT
:
4189 BNX2X_PATH0_LOAD_CNT_SHIFT
;
4191 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4192 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4194 DP(NETIF_MSG_IFUP
, "Old GEN_REG_VAL=0x%08x\n", val
);
4196 /* get the current counter value */
4197 val1
= (val
& mask
) >> shift
;
4199 /* set bit of that PF */
4200 val1
|= (1 << bp
->pf_num
);
4202 /* clear the old value */
4205 /* set the new one */
4206 val
|= ((val1
<< shift
) & mask
);
4208 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
);
4209 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4213 * bnx2x_clear_pf_load - clear pf load mark
4215 * @bp: driver handle
4217 * Should be run under rtnl lock.
4218 * Decrements the load counter for the current engine. Returns
4219 * whether other functions are still loaded
4221 bool bnx2x_clear_pf_load(struct bnx2x
*bp
)
4224 u32 mask
= BP_PATH(bp
) ? BNX2X_PATH1_LOAD_CNT_MASK
:
4225 BNX2X_PATH0_LOAD_CNT_MASK
;
4226 u32 shift
= BP_PATH(bp
) ? BNX2X_PATH1_LOAD_CNT_SHIFT
:
4227 BNX2X_PATH0_LOAD_CNT_SHIFT
;
4229 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4230 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4231 DP(NETIF_MSG_IFDOWN
, "Old GEN_REG_VAL=0x%08x\n", val
);
4233 /* get the current counter value */
4234 val1
= (val
& mask
) >> shift
;
4236 /* clear bit of that PF */
4237 val1
&= ~(1 << bp
->pf_num
);
4239 /* clear the old value */
4242 /* set the new one */
4243 val
|= ((val1
<< shift
) & mask
);
4245 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
);
4246 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4251 * Read the load status for the current engine.
4253 * should be run under rtnl lock
4255 static bool bnx2x_get_load_status(struct bnx2x
*bp
, int engine
)
4257 u32 mask
= (engine
? BNX2X_PATH1_LOAD_CNT_MASK
:
4258 BNX2X_PATH0_LOAD_CNT_MASK
);
4259 u32 shift
= (engine
? BNX2X_PATH1_LOAD_CNT_SHIFT
:
4260 BNX2X_PATH0_LOAD_CNT_SHIFT
);
4261 u32 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4263 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
, "GLOB_REG=0x%08x\n", val
);
4265 val
= (val
& mask
) >> shift
;
4267 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
, "load mask for engine %d = 0x%x\n",
4273 static void _print_parity(struct bnx2x
*bp
, u32 reg
)
4275 pr_cont(" [0x%08x] ", REG_RD(bp
, reg
));
4278 static void _print_next_block(int idx
, const char *blk
)
4280 pr_cont("%s%s", idx
? ", " : "", blk
);
4283 static int bnx2x_check_blocks_with_parity0(struct bnx2x
*bp
, u32 sig
,
4284 int par_num
, bool print
)
4288 for (i
= 0; sig
; i
++) {
4289 cur_bit
= ((u32
)0x1 << i
);
4290 if (sig
& cur_bit
) {
4292 case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR
:
4294 _print_next_block(par_num
++, "BRB");
4296 BRB1_REG_BRB1_PRTY_STS
);
4299 case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR
:
4301 _print_next_block(par_num
++, "PARSER");
4302 _print_parity(bp
, PRS_REG_PRS_PRTY_STS
);
4305 case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR
:
4307 _print_next_block(par_num
++, "TSDM");
4309 TSDM_REG_TSDM_PRTY_STS
);
4312 case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR
:
4314 _print_next_block(par_num
++,
4316 _print_parity(bp
, SRC_REG_SRC_PRTY_STS
);
4319 case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR
:
4321 _print_next_block(par_num
++, "TCM");
4323 TCM_REG_TCM_PRTY_STS
);
4326 case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR
:
4328 _print_next_block(par_num
++, "TSEMI");
4330 TSEM_REG_TSEM_PRTY_STS_0
);
4332 TSEM_REG_TSEM_PRTY_STS_1
);
4335 case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR
:
4337 _print_next_block(par_num
++, "XPB");
4338 _print_parity(bp
, GRCBASE_XPB
+
4339 PB_REG_PB_PRTY_STS
);
4352 static int bnx2x_check_blocks_with_parity1(struct bnx2x
*bp
, u32 sig
,
4353 int par_num
, bool *global
,
4358 for (i
= 0; sig
; i
++) {
4359 cur_bit
= ((u32
)0x1 << i
);
4360 if (sig
& cur_bit
) {
4362 case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR
:
4364 _print_next_block(par_num
++, "PBF");
4365 _print_parity(bp
, PBF_REG_PBF_PRTY_STS
);
4368 case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR
:
4370 _print_next_block(par_num
++, "QM");
4371 _print_parity(bp
, QM_REG_QM_PRTY_STS
);
4374 case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR
:
4376 _print_next_block(par_num
++, "TM");
4377 _print_parity(bp
, TM_REG_TM_PRTY_STS
);
4380 case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR
:
4382 _print_next_block(par_num
++, "XSDM");
4384 XSDM_REG_XSDM_PRTY_STS
);
4387 case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR
:
4389 _print_next_block(par_num
++, "XCM");
4390 _print_parity(bp
, XCM_REG_XCM_PRTY_STS
);
4393 case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR
:
4395 _print_next_block(par_num
++, "XSEMI");
4397 XSEM_REG_XSEM_PRTY_STS_0
);
4399 XSEM_REG_XSEM_PRTY_STS_1
);
4402 case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR
:
4404 _print_next_block(par_num
++,
4407 DORQ_REG_DORQ_PRTY_STS
);
4410 case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR
:
4412 _print_next_block(par_num
++, "NIG");
4413 if (CHIP_IS_E1x(bp
)) {
4415 NIG_REG_NIG_PRTY_STS
);
4418 NIG_REG_NIG_PRTY_STS_0
);
4420 NIG_REG_NIG_PRTY_STS_1
);
4424 case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR
:
4426 _print_next_block(par_num
++,
4430 case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR
:
4432 _print_next_block(par_num
++, "DEBUG");
4433 _print_parity(bp
, DBG_REG_DBG_PRTY_STS
);
4436 case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR
:
4438 _print_next_block(par_num
++, "USDM");
4440 USDM_REG_USDM_PRTY_STS
);
4443 case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR
:
4445 _print_next_block(par_num
++, "UCM");
4446 _print_parity(bp
, UCM_REG_UCM_PRTY_STS
);
4449 case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR
:
4451 _print_next_block(par_num
++, "USEMI");
4453 USEM_REG_USEM_PRTY_STS_0
);
4455 USEM_REG_USEM_PRTY_STS_1
);
4458 case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR
:
4460 _print_next_block(par_num
++, "UPB");
4461 _print_parity(bp
, GRCBASE_UPB
+
4462 PB_REG_PB_PRTY_STS
);
4465 case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR
:
4467 _print_next_block(par_num
++, "CSDM");
4469 CSDM_REG_CSDM_PRTY_STS
);
4472 case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR
:
4474 _print_next_block(par_num
++, "CCM");
4475 _print_parity(bp
, CCM_REG_CCM_PRTY_STS
);
4488 static int bnx2x_check_blocks_with_parity2(struct bnx2x
*bp
, u32 sig
,
4489 int par_num
, bool print
)
4493 for (i
= 0; sig
; i
++) {
4494 cur_bit
= ((u32
)0x1 << i
);
4495 if (sig
& cur_bit
) {
4497 case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR
:
4499 _print_next_block(par_num
++, "CSEMI");
4501 CSEM_REG_CSEM_PRTY_STS_0
);
4503 CSEM_REG_CSEM_PRTY_STS_1
);
4506 case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR
:
4508 _print_next_block(par_num
++, "PXP");
4509 _print_parity(bp
, PXP_REG_PXP_PRTY_STS
);
4511 PXP2_REG_PXP2_PRTY_STS_0
);
4513 PXP2_REG_PXP2_PRTY_STS_1
);
4516 case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR
:
4518 _print_next_block(par_num
++,
4519 "PXPPCICLOCKCLIENT");
4521 case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR
:
4523 _print_next_block(par_num
++, "CFC");
4525 CFC_REG_CFC_PRTY_STS
);
4528 case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR
:
4530 _print_next_block(par_num
++, "CDU");
4531 _print_parity(bp
, CDU_REG_CDU_PRTY_STS
);
4534 case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR
:
4536 _print_next_block(par_num
++, "DMAE");
4538 DMAE_REG_DMAE_PRTY_STS
);
4541 case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR
:
4543 _print_next_block(par_num
++, "IGU");
4544 if (CHIP_IS_E1x(bp
))
4546 HC_REG_HC_PRTY_STS
);
4549 IGU_REG_IGU_PRTY_STS
);
4552 case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR
:
4554 _print_next_block(par_num
++, "MISC");
4556 MISC_REG_MISC_PRTY_STS
);
4569 static int bnx2x_check_blocks_with_parity3(u32 sig
, int par_num
,
4570 bool *global
, bool print
)
4574 for (i
= 0; sig
; i
++) {
4575 cur_bit
= ((u32
)0x1 << i
);
4576 if (sig
& cur_bit
) {
4578 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY
:
4580 _print_next_block(par_num
++, "MCP ROM");
4583 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY
:
4585 _print_next_block(par_num
++,
4589 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY
:
4591 _print_next_block(par_num
++,
4595 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY
:
4597 _print_next_block(par_num
++,
4611 static int bnx2x_check_blocks_with_parity4(struct bnx2x
*bp
, u32 sig
,
4612 int par_num
, bool print
)
4616 for (i
= 0; sig
; i
++) {
4617 cur_bit
= ((u32
)0x1 << i
);
4618 if (sig
& cur_bit
) {
4620 case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
:
4622 _print_next_block(par_num
++, "PGLUE_B");
4624 PGLUE_B_REG_PGLUE_B_PRTY_STS
);
4627 case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR
:
4629 _print_next_block(par_num
++, "ATC");
4631 ATC_REG_ATC_PRTY_STS
);
4644 static bool bnx2x_parity_attn(struct bnx2x
*bp
, bool *global
, bool print
,
4647 if ((sig
[0] & HW_PRTY_ASSERT_SET_0
) ||
4648 (sig
[1] & HW_PRTY_ASSERT_SET_1
) ||
4649 (sig
[2] & HW_PRTY_ASSERT_SET_2
) ||
4650 (sig
[3] & HW_PRTY_ASSERT_SET_3
) ||
4651 (sig
[4] & HW_PRTY_ASSERT_SET_4
)) {
4653 DP(NETIF_MSG_HW
, "Was parity error: HW block parity attention:\n"
4654 "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n",
4655 sig
[0] & HW_PRTY_ASSERT_SET_0
,
4656 sig
[1] & HW_PRTY_ASSERT_SET_1
,
4657 sig
[2] & HW_PRTY_ASSERT_SET_2
,
4658 sig
[3] & HW_PRTY_ASSERT_SET_3
,
4659 sig
[4] & HW_PRTY_ASSERT_SET_4
);
4662 "Parity errors detected in blocks: ");
4663 par_num
= bnx2x_check_blocks_with_parity0(bp
,
4664 sig
[0] & HW_PRTY_ASSERT_SET_0
, par_num
, print
);
4665 par_num
= bnx2x_check_blocks_with_parity1(bp
,
4666 sig
[1] & HW_PRTY_ASSERT_SET_1
, par_num
, global
, print
);
4667 par_num
= bnx2x_check_blocks_with_parity2(bp
,
4668 sig
[2] & HW_PRTY_ASSERT_SET_2
, par_num
, print
);
4669 par_num
= bnx2x_check_blocks_with_parity3(
4670 sig
[3] & HW_PRTY_ASSERT_SET_3
, par_num
, global
, print
);
4671 par_num
= bnx2x_check_blocks_with_parity4(bp
,
4672 sig
[4] & HW_PRTY_ASSERT_SET_4
, par_num
, print
);
4683 * bnx2x_chk_parity_attn - checks for parity attentions.
4685 * @bp: driver handle
4686 * @global: true if there was a global attention
4687 * @print: show parity attention in syslog
4689 bool bnx2x_chk_parity_attn(struct bnx2x
*bp
, bool *global
, bool print
)
4691 struct attn_route attn
= { {0} };
4692 int port
= BP_PORT(bp
);
4694 attn
.sig
[0] = REG_RD(bp
,
4695 MISC_REG_AEU_AFTER_INVERT_1_FUNC_0
+
4697 attn
.sig
[1] = REG_RD(bp
,
4698 MISC_REG_AEU_AFTER_INVERT_2_FUNC_0
+
4700 attn
.sig
[2] = REG_RD(bp
,
4701 MISC_REG_AEU_AFTER_INVERT_3_FUNC_0
+
4703 attn
.sig
[3] = REG_RD(bp
,
4704 MISC_REG_AEU_AFTER_INVERT_4_FUNC_0
+
4707 if (!CHIP_IS_E1x(bp
))
4708 attn
.sig
[4] = REG_RD(bp
,
4709 MISC_REG_AEU_AFTER_INVERT_5_FUNC_0
+
4712 return bnx2x_parity_attn(bp
, global
, print
, attn
.sig
);
4715 static void bnx2x_attn_int_deasserted4(struct bnx2x
*bp
, u32 attn
)
4718 if (attn
& AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT
) {
4720 val
= REG_RD(bp
, PGLUE_B_REG_PGLUE_B_INT_STS_CLR
);
4721 BNX2X_ERR("PGLUE hw attention 0x%x\n", val
);
4722 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR
)
4723 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR\n");
4724 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR
)
4725 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR\n");
4726 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN
)
4727 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN\n");
4728 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN
)
4729 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN\n");
4731 PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN
)
4732 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN\n");
4734 PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN
)
4735 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN\n");
4736 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN
)
4737 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN\n");
4738 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN
)
4739 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN\n");
4740 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW
)
4741 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW\n");
4743 if (attn
& AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT
) {
4744 val
= REG_RD(bp
, ATC_REG_ATC_INT_STS_CLR
);
4745 BNX2X_ERR("ATC hw attention 0x%x\n", val
);
4746 if (val
& ATC_ATC_INT_STS_REG_ADDRESS_ERROR
)
4747 BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n");
4748 if (val
& ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND
)
4749 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND\n");
4750 if (val
& ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS
)
4751 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS\n");
4752 if (val
& ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT
)
4753 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT\n");
4754 if (val
& ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR
)
4755 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n");
4756 if (val
& ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU
)
4757 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU\n");
4760 if (attn
& (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
|
4761 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR
)) {
4762 BNX2X_ERR("FATAL parity attention set4 0x%x\n",
4763 (u32
)(attn
& (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
|
4764 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR
)));
4768 static void bnx2x_attn_int_deasserted(struct bnx2x
*bp
, u32 deasserted
)
4770 struct attn_route attn
, *group_mask
;
4771 int port
= BP_PORT(bp
);
4776 bool global
= false;
4778 /* need to take HW lock because MCP or other port might also
4779 try to handle this event */
4780 bnx2x_acquire_alr(bp
);
4782 if (bnx2x_chk_parity_attn(bp
, &global
, true)) {
4783 #ifndef BNX2X_STOP_ON_ERROR
4784 bp
->recovery_state
= BNX2X_RECOVERY_INIT
;
4785 schedule_delayed_work(&bp
->sp_rtnl_task
, 0);
4786 /* Disable HW interrupts */
4787 bnx2x_int_disable(bp
);
4788 /* In case of parity errors don't handle attentions so that
4789 * other function would "see" parity errors.
4794 bnx2x_release_alr(bp
);
4798 attn
.sig
[0] = REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0
+ port
*4);
4799 attn
.sig
[1] = REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0
+ port
*4);
4800 attn
.sig
[2] = REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0
+ port
*4);
4801 attn
.sig
[3] = REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0
+ port
*4);
4802 if (!CHIP_IS_E1x(bp
))
4804 REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0
+ port
*4);
4808 DP(NETIF_MSG_HW
, "attn: %08x %08x %08x %08x %08x\n",
4809 attn
.sig
[0], attn
.sig
[1], attn
.sig
[2], attn
.sig
[3], attn
.sig
[4]);
4811 for (index
= 0; index
< MAX_DYNAMIC_ATTN_GRPS
; index
++) {
4812 if (deasserted
& (1 << index
)) {
4813 group_mask
= &bp
->attn_group
[index
];
4815 DP(NETIF_MSG_HW
, "group[%d]: %08x %08x %08x %08x %08x\n",
4817 group_mask
->sig
[0], group_mask
->sig
[1],
4818 group_mask
->sig
[2], group_mask
->sig
[3],
4819 group_mask
->sig
[4]);
4821 bnx2x_attn_int_deasserted4(bp
,
4822 attn
.sig
[4] & group_mask
->sig
[4]);
4823 bnx2x_attn_int_deasserted3(bp
,
4824 attn
.sig
[3] & group_mask
->sig
[3]);
4825 bnx2x_attn_int_deasserted1(bp
,
4826 attn
.sig
[1] & group_mask
->sig
[1]);
4827 bnx2x_attn_int_deasserted2(bp
,
4828 attn
.sig
[2] & group_mask
->sig
[2]);
4829 bnx2x_attn_int_deasserted0(bp
,
4830 attn
.sig
[0] & group_mask
->sig
[0]);
4834 bnx2x_release_alr(bp
);
4836 if (bp
->common
.int_block
== INT_BLOCK_HC
)
4837 reg_addr
= (HC_REG_COMMAND_REG
+ port
*32 +
4838 COMMAND_REG_ATTN_BITS_CLR
);
4840 reg_addr
= (BAR_IGU_INTMEM
+ IGU_CMD_ATTN_BIT_CLR_UPPER
*8);
4843 DP(NETIF_MSG_HW
, "about to mask 0x%08x at %s addr 0x%x\n", val
,
4844 (bp
->common
.int_block
== INT_BLOCK_HC
) ? "HC" : "IGU", reg_addr
);
4845 REG_WR(bp
, reg_addr
, val
);
4847 if (~bp
->attn_state
& deasserted
)
4848 BNX2X_ERR("IGU ERROR\n");
4850 reg_addr
= port
? MISC_REG_AEU_MASK_ATTN_FUNC_1
:
4851 MISC_REG_AEU_MASK_ATTN_FUNC_0
;
4853 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_PORT0_ATT_MASK
+ port
);
4854 aeu_mask
= REG_RD(bp
, reg_addr
);
4856 DP(NETIF_MSG_HW
, "aeu_mask %x newly deasserted %x\n",
4857 aeu_mask
, deasserted
);
4858 aeu_mask
|= (deasserted
& 0x3ff);
4859 DP(NETIF_MSG_HW
, "new mask %x\n", aeu_mask
);
4861 REG_WR(bp
, reg_addr
, aeu_mask
);
4862 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_PORT0_ATT_MASK
+ port
);
4864 DP(NETIF_MSG_HW
, "attn_state %x\n", bp
->attn_state
);
4865 bp
->attn_state
&= ~deasserted
;
4866 DP(NETIF_MSG_HW
, "new state %x\n", bp
->attn_state
);
4869 static void bnx2x_attn_int(struct bnx2x
*bp
)
4871 /* read local copy of bits */
4872 u32 attn_bits
= le32_to_cpu(bp
->def_status_blk
->atten_status_block
.
4874 u32 attn_ack
= le32_to_cpu(bp
->def_status_blk
->atten_status_block
.
4876 u32 attn_state
= bp
->attn_state
;
4878 /* look for changed bits */
4879 u32 asserted
= attn_bits
& ~attn_ack
& ~attn_state
;
4880 u32 deasserted
= ~attn_bits
& attn_ack
& attn_state
;
4883 "attn_bits %x attn_ack %x asserted %x deasserted %x\n",
4884 attn_bits
, attn_ack
, asserted
, deasserted
);
4886 if (~(attn_bits
^ attn_ack
) & (attn_bits
^ attn_state
))
4887 BNX2X_ERR("BAD attention state\n");
4889 /* handle bits that were raised */
4891 bnx2x_attn_int_asserted(bp
, asserted
);
4894 bnx2x_attn_int_deasserted(bp
, deasserted
);
4897 void bnx2x_igu_ack_sb(struct bnx2x
*bp
, u8 igu_sb_id
, u8 segment
,
4898 u16 index
, u8 op
, u8 update
)
4900 u32 igu_addr
= bp
->igu_base_addr
;
4901 igu_addr
+= (IGU_CMD_INT_ACK_BASE
+ igu_sb_id
)*8;
4902 bnx2x_igu_ack_sb_gen(bp
, igu_sb_id
, segment
, index
, op
, update
,
4906 static void bnx2x_update_eq_prod(struct bnx2x
*bp
, u16 prod
)
4908 /* No memory barriers */
4909 storm_memset_eq_prod(bp
, prod
, BP_FUNC(bp
));
4910 mmiowb(); /* keep prod updates ordered */
4913 static int bnx2x_cnic_handle_cfc_del(struct bnx2x
*bp
, u32 cid
,
4914 union event_ring_elem
*elem
)
4916 u8 err
= elem
->message
.error
;
4918 if (!bp
->cnic_eth_dev
.starting_cid
||
4919 (cid
< bp
->cnic_eth_dev
.starting_cid
&&
4920 cid
!= bp
->cnic_eth_dev
.iscsi_l2_cid
))
4923 DP(BNX2X_MSG_SP
, "got delete ramrod for CNIC CID %d\n", cid
);
4925 if (unlikely(err
)) {
4927 BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n",
4929 bnx2x_panic_dump(bp
, false);
4931 bnx2x_cnic_cfc_comp(bp
, cid
, err
);
4935 static void bnx2x_handle_mcast_eqe(struct bnx2x
*bp
)
4937 struct bnx2x_mcast_ramrod_params rparam
;
4940 memset(&rparam
, 0, sizeof(rparam
));
4942 rparam
.mcast_obj
= &bp
->mcast_obj
;
4944 netif_addr_lock_bh(bp
->dev
);
4946 /* Clear pending state for the last command */
4947 bp
->mcast_obj
.raw
.clear_pending(&bp
->mcast_obj
.raw
);
4949 /* If there are pending mcast commands - send them */
4950 if (bp
->mcast_obj
.check_pending(&bp
->mcast_obj
)) {
4951 rc
= bnx2x_config_mcast(bp
, &rparam
, BNX2X_MCAST_CMD_CONT
);
4953 BNX2X_ERR("Failed to send pending mcast commands: %d\n",
4957 netif_addr_unlock_bh(bp
->dev
);
4960 static void bnx2x_handle_classification_eqe(struct bnx2x
*bp
,
4961 union event_ring_elem
*elem
)
4963 unsigned long ramrod_flags
= 0;
4965 u32 cid
= elem
->message
.data
.eth_event
.echo
& BNX2X_SWCID_MASK
;
4966 struct bnx2x_vlan_mac_obj
*vlan_mac_obj
;
4968 /* Always push next commands out, don't wait here */
4969 __set_bit(RAMROD_CONT
, &ramrod_flags
);
4971 switch (le32_to_cpu((__force __le32
)elem
->message
.data
.eth_event
.echo
)
4972 >> BNX2X_SWCID_SHIFT
) {
4973 case BNX2X_FILTER_MAC_PENDING
:
4974 DP(BNX2X_MSG_SP
, "Got SETUP_MAC completions\n");
4975 if (CNIC_LOADED(bp
) && (cid
== BNX2X_ISCSI_ETH_CID(bp
)))
4976 vlan_mac_obj
= &bp
->iscsi_l2_mac_obj
;
4978 vlan_mac_obj
= &bp
->sp_objs
[cid
].mac_obj
;
4981 case BNX2X_FILTER_MCAST_PENDING
:
4982 DP(BNX2X_MSG_SP
, "Got SETUP_MCAST completions\n");
4983 /* This is only relevant for 57710 where multicast MACs are
4984 * configured as unicast MACs using the same ramrod.
4986 bnx2x_handle_mcast_eqe(bp
);
4989 BNX2X_ERR("Unsupported classification command: %d\n",
4990 elem
->message
.data
.eth_event
.echo
);
4994 rc
= vlan_mac_obj
->complete(bp
, vlan_mac_obj
, elem
, &ramrod_flags
);
4997 BNX2X_ERR("Failed to schedule new commands: %d\n", rc
);
4999 DP(BNX2X_MSG_SP
, "Scheduled next pending commands...\n");
5002 static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x
*bp
, bool start
);
5004 static void bnx2x_handle_rx_mode_eqe(struct bnx2x
*bp
)
5006 netif_addr_lock_bh(bp
->dev
);
5008 clear_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
);
5010 /* Send rx_mode command again if was requested */
5011 if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED
, &bp
->sp_state
))
5012 bnx2x_set_storm_rx_mode(bp
);
5013 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED
,
5015 bnx2x_set_iscsi_eth_rx_mode(bp
, true);
5016 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED
,
5018 bnx2x_set_iscsi_eth_rx_mode(bp
, false);
5020 netif_addr_unlock_bh(bp
->dev
);
5023 static void bnx2x_after_afex_vif_lists(struct bnx2x
*bp
,
5024 union event_ring_elem
*elem
)
5026 if (elem
->message
.data
.vif_list_event
.echo
== VIF_LIST_RULE_GET
) {
5028 "afex: ramrod completed VIF LIST_GET, addrs 0x%x\n",
5029 elem
->message
.data
.vif_list_event
.func_bit_map
);
5030 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_LISTGET_ACK
,
5031 elem
->message
.data
.vif_list_event
.func_bit_map
);
5032 } else if (elem
->message
.data
.vif_list_event
.echo
==
5033 VIF_LIST_RULE_SET
) {
5034 DP(BNX2X_MSG_SP
, "afex: ramrod completed VIF LIST_SET\n");
5035 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_LISTSET_ACK
, 0);
5039 /* called with rtnl_lock */
5040 static void bnx2x_after_function_update(struct bnx2x
*bp
)
5043 struct bnx2x_fastpath
*fp
;
5044 struct bnx2x_queue_state_params queue_params
= {NULL
};
5045 struct bnx2x_queue_update_params
*q_update_params
=
5046 &queue_params
.params
.update
;
5048 /* Send Q update command with afex vlan removal values for all Qs */
5049 queue_params
.cmd
= BNX2X_Q_CMD_UPDATE
;
5051 /* set silent vlan removal values according to vlan mode */
5052 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG
,
5053 &q_update_params
->update_flags
);
5054 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM
,
5055 &q_update_params
->update_flags
);
5056 __set_bit(RAMROD_COMP_WAIT
, &queue_params
.ramrod_flags
);
5058 /* in access mode mark mask and value are 0 to strip all vlans */
5059 if (bp
->afex_vlan_mode
== FUNC_MF_CFG_AFEX_VLAN_ACCESS_MODE
) {
5060 q_update_params
->silent_removal_value
= 0;
5061 q_update_params
->silent_removal_mask
= 0;
5063 q_update_params
->silent_removal_value
=
5064 (bp
->afex_def_vlan_tag
& VLAN_VID_MASK
);
5065 q_update_params
->silent_removal_mask
= VLAN_VID_MASK
;
5068 for_each_eth_queue(bp
, q
) {
5069 /* Set the appropriate Queue object */
5071 queue_params
.q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
5073 /* send the ramrod */
5074 rc
= bnx2x_queue_state_change(bp
, &queue_params
);
5076 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n",
5080 if (!NO_FCOE(bp
) && CNIC_ENABLED(bp
)) {
5081 fp
= &bp
->fp
[FCOE_IDX(bp
)];
5082 queue_params
.q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
5084 /* clear pending completion bit */
5085 __clear_bit(RAMROD_COMP_WAIT
, &queue_params
.ramrod_flags
);
5087 /* mark latest Q bit */
5088 smp_mb__before_clear_bit();
5089 set_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING
, &bp
->sp_state
);
5090 smp_mb__after_clear_bit();
5092 /* send Q update ramrod for FCoE Q */
5093 rc
= bnx2x_queue_state_change(bp
, &queue_params
);
5095 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n",
5098 /* If no FCoE ring - ACK MCP now */
5099 bnx2x_link_report(bp
);
5100 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_VIFSET_ACK
, 0);
5104 static struct bnx2x_queue_sp_obj
*bnx2x_cid_to_q_obj(
5105 struct bnx2x
*bp
, u32 cid
)
5107 DP(BNX2X_MSG_SP
, "retrieving fp from cid %d\n", cid
);
5109 if (CNIC_LOADED(bp
) && (cid
== BNX2X_FCOE_ETH_CID(bp
)))
5110 return &bnx2x_fcoe_sp_obj(bp
, q_obj
);
5112 return &bp
->sp_objs
[CID_TO_FP(cid
, bp
)].q_obj
;
5115 static void bnx2x_eq_int(struct bnx2x
*bp
)
5117 u16 hw_cons
, sw_cons
, sw_prod
;
5118 union event_ring_elem
*elem
;
5122 int rc
, spqe_cnt
= 0;
5123 struct bnx2x_queue_sp_obj
*q_obj
;
5124 struct bnx2x_func_sp_obj
*f_obj
= &bp
->func_obj
;
5125 struct bnx2x_raw_obj
*rss_raw
= &bp
->rss_conf_obj
.raw
;
5127 hw_cons
= le16_to_cpu(*bp
->eq_cons_sb
);
5129 /* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256.
5130 * when we get the next-page we need to adjust so the loop
5131 * condition below will be met. The next element is the size of a
5132 * regular element and hence incrementing by 1
5134 if ((hw_cons
& EQ_DESC_MAX_PAGE
) == EQ_DESC_MAX_PAGE
)
5137 /* This function may never run in parallel with itself for a
5138 * specific bp, thus there is no need in "paired" read memory
5141 sw_cons
= bp
->eq_cons
;
5142 sw_prod
= bp
->eq_prod
;
5144 DP(BNX2X_MSG_SP
, "EQ: hw_cons %u sw_cons %u bp->eq_spq_left %x\n",
5145 hw_cons
, sw_cons
, atomic_read(&bp
->eq_spq_left
));
5147 for (; sw_cons
!= hw_cons
;
5148 sw_prod
= NEXT_EQ_IDX(sw_prod
), sw_cons
= NEXT_EQ_IDX(sw_cons
)) {
5150 elem
= &bp
->eq_ring
[EQ_DESC(sw_cons
)];
5152 rc
= bnx2x_iov_eq_sp_event(bp
, elem
);
5154 DP(BNX2X_MSG_IOV
, "bnx2x_iov_eq_sp_event returned %d\n",
5159 /* elem CID originates from FW; actually LE */
5160 cid
= SW_CID((__force __le32
)
5161 elem
->message
.data
.cfc_del_event
.cid
);
5162 opcode
= elem
->message
.opcode
;
5164 /* handle eq element */
5166 case EVENT_RING_OPCODE_VF_PF_CHANNEL
:
5167 DP(BNX2X_MSG_IOV
, "vf pf channel element on eq\n");
5168 bnx2x_vf_mbx(bp
, &elem
->message
.data
.vf_pf_event
);
5171 case EVENT_RING_OPCODE_STAT_QUERY
:
5172 DP(BNX2X_MSG_SP
| BNX2X_MSG_STATS
,
5173 "got statistics comp event %d\n",
5175 /* nothing to do with stats comp */
5178 case EVENT_RING_OPCODE_CFC_DEL
:
5179 /* handle according to cid range */
5181 * we may want to verify here that the bp state is
5185 "got delete ramrod for MULTI[%d]\n", cid
);
5187 if (CNIC_LOADED(bp
) &&
5188 !bnx2x_cnic_handle_cfc_del(bp
, cid
, elem
))
5191 q_obj
= bnx2x_cid_to_q_obj(bp
, cid
);
5193 if (q_obj
->complete_cmd(bp
, q_obj
, BNX2X_Q_CMD_CFC_DEL
))
5198 case EVENT_RING_OPCODE_STOP_TRAFFIC
:
5199 DP(BNX2X_MSG_SP
| BNX2X_MSG_DCB
, "got STOP TRAFFIC\n");
5200 if (f_obj
->complete_cmd(bp
, f_obj
,
5201 BNX2X_F_CMD_TX_STOP
))
5203 bnx2x_dcbx_set_params(bp
, BNX2X_DCBX_STATE_TX_PAUSED
);
5206 case EVENT_RING_OPCODE_START_TRAFFIC
:
5207 DP(BNX2X_MSG_SP
| BNX2X_MSG_DCB
, "got START TRAFFIC\n");
5208 if (f_obj
->complete_cmd(bp
, f_obj
,
5209 BNX2X_F_CMD_TX_START
))
5211 bnx2x_dcbx_set_params(bp
, BNX2X_DCBX_STATE_TX_RELEASED
);
5214 case EVENT_RING_OPCODE_FUNCTION_UPDATE
:
5215 echo
= elem
->message
.data
.function_update_event
.echo
;
5216 if (echo
== SWITCH_UPDATE
) {
5217 DP(BNX2X_MSG_SP
| NETIF_MSG_IFUP
,
5218 "got FUNC_SWITCH_UPDATE ramrod\n");
5219 if (f_obj
->complete_cmd(
5220 bp
, f_obj
, BNX2X_F_CMD_SWITCH_UPDATE
))
5224 DP(BNX2X_MSG_SP
| BNX2X_MSG_MCP
,
5225 "AFEX: ramrod completed FUNCTION_UPDATE\n");
5226 f_obj
->complete_cmd(bp
, f_obj
,
5227 BNX2X_F_CMD_AFEX_UPDATE
);
5229 /* We will perform the Queues update from
5230 * sp_rtnl task as all Queue SP operations
5231 * should run under rtnl_lock.
5233 smp_mb__before_clear_bit();
5234 set_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE
,
5235 &bp
->sp_rtnl_state
);
5236 smp_mb__after_clear_bit();
5238 schedule_delayed_work(&bp
->sp_rtnl_task
, 0);
5243 case EVENT_RING_OPCODE_AFEX_VIF_LISTS
:
5244 f_obj
->complete_cmd(bp
, f_obj
,
5245 BNX2X_F_CMD_AFEX_VIFLISTS
);
5246 bnx2x_after_afex_vif_lists(bp
, elem
);
5248 case EVENT_RING_OPCODE_FUNCTION_START
:
5249 DP(BNX2X_MSG_SP
| NETIF_MSG_IFUP
,
5250 "got FUNC_START ramrod\n");
5251 if (f_obj
->complete_cmd(bp
, f_obj
, BNX2X_F_CMD_START
))
5256 case EVENT_RING_OPCODE_FUNCTION_STOP
:
5257 DP(BNX2X_MSG_SP
| NETIF_MSG_IFUP
,
5258 "got FUNC_STOP ramrod\n");
5259 if (f_obj
->complete_cmd(bp
, f_obj
, BNX2X_F_CMD_STOP
))
5265 switch (opcode
| bp
->state
) {
5266 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES
|
5268 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES
|
5269 BNX2X_STATE_OPENING_WAIT4_PORT
):
5270 cid
= elem
->message
.data
.eth_event
.echo
&
5272 DP(BNX2X_MSG_SP
, "got RSS_UPDATE ramrod. CID %d\n",
5274 rss_raw
->clear_pending(rss_raw
);
5277 case (EVENT_RING_OPCODE_SET_MAC
| BNX2X_STATE_OPEN
):
5278 case (EVENT_RING_OPCODE_SET_MAC
| BNX2X_STATE_DIAG
):
5279 case (EVENT_RING_OPCODE_SET_MAC
|
5280 BNX2X_STATE_CLOSING_WAIT4_HALT
):
5281 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES
|
5283 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES
|
5285 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES
|
5286 BNX2X_STATE_CLOSING_WAIT4_HALT
):
5287 DP(BNX2X_MSG_SP
, "got (un)set mac ramrod\n");
5288 bnx2x_handle_classification_eqe(bp
, elem
);
5291 case (EVENT_RING_OPCODE_MULTICAST_RULES
|
5293 case (EVENT_RING_OPCODE_MULTICAST_RULES
|
5295 case (EVENT_RING_OPCODE_MULTICAST_RULES
|
5296 BNX2X_STATE_CLOSING_WAIT4_HALT
):
5297 DP(BNX2X_MSG_SP
, "got mcast ramrod\n");
5298 bnx2x_handle_mcast_eqe(bp
);
5301 case (EVENT_RING_OPCODE_FILTERS_RULES
|
5303 case (EVENT_RING_OPCODE_FILTERS_RULES
|
5305 case (EVENT_RING_OPCODE_FILTERS_RULES
|
5306 BNX2X_STATE_CLOSING_WAIT4_HALT
):
5307 DP(BNX2X_MSG_SP
, "got rx_mode ramrod\n");
5308 bnx2x_handle_rx_mode_eqe(bp
);
5311 /* unknown event log error and continue */
5312 BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n",
5313 elem
->message
.opcode
, bp
->state
);
5319 smp_mb__before_atomic_inc();
5320 atomic_add(spqe_cnt
, &bp
->eq_spq_left
);
5322 bp
->eq_cons
= sw_cons
;
5323 bp
->eq_prod
= sw_prod
;
5324 /* Make sure that above mem writes were issued towards the memory */
5327 /* update producer */
5328 bnx2x_update_eq_prod(bp
, bp
->eq_prod
);
5331 static void bnx2x_sp_task(struct work_struct
*work
)
5333 struct bnx2x
*bp
= container_of(work
, struct bnx2x
, sp_task
.work
);
5335 DP(BNX2X_MSG_SP
, "sp task invoked\n");
5337 /* make sure the atomic interrupt_occurred has been written */
5339 if (atomic_read(&bp
->interrupt_occurred
)) {
5341 /* what work needs to be performed? */
5342 u16 status
= bnx2x_update_dsb_idx(bp
);
5344 DP(BNX2X_MSG_SP
, "status %x\n", status
);
5345 DP(BNX2X_MSG_SP
, "setting interrupt_occurred to 0\n");
5346 atomic_set(&bp
->interrupt_occurred
, 0);
5349 if (status
& BNX2X_DEF_SB_ATT_IDX
) {
5351 status
&= ~BNX2X_DEF_SB_ATT_IDX
;
5354 /* SP events: STAT_QUERY and others */
5355 if (status
& BNX2X_DEF_SB_IDX
) {
5356 struct bnx2x_fastpath
*fp
= bnx2x_fcoe_fp(bp
);
5358 if (FCOE_INIT(bp
) &&
5359 (bnx2x_has_rx_work(fp
) || bnx2x_has_tx_work(fp
))) {
5360 /* Prevent local bottom-halves from running as
5361 * we are going to change the local NAPI list.
5364 napi_schedule(&bnx2x_fcoe(bp
, napi
));
5368 /* Handle EQ completions */
5370 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
, USTORM_ID
,
5371 le16_to_cpu(bp
->def_idx
), IGU_INT_NOP
, 1);
5373 status
&= ~BNX2X_DEF_SB_IDX
;
5376 /* if status is non zero then perhaps something went wrong */
5377 if (unlikely(status
))
5379 "got an unknown interrupt! (status 0x%x)\n", status
);
5381 /* ack status block only if something was actually handled */
5382 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
, ATTENTION_ID
,
5383 le16_to_cpu(bp
->def_att_idx
), IGU_INT_ENABLE
, 1);
5386 /* must be called after the EQ processing (since eq leads to sriov
5387 * ramrod completion flows).
5388 * This flow may have been scheduled by the arrival of a ramrod
5389 * completion, or by the sriov code rescheduling itself.
5391 bnx2x_iov_sp_task(bp
);
5393 /* afex - poll to check if VIFSET_ACK should be sent to MFW */
5394 if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK
,
5396 bnx2x_link_report(bp
);
5397 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_VIFSET_ACK
, 0);
5401 irqreturn_t
bnx2x_msix_sp_int(int irq
, void *dev_instance
)
5403 struct net_device
*dev
= dev_instance
;
5404 struct bnx2x
*bp
= netdev_priv(dev
);
5406 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
, USTORM_ID
, 0,
5407 IGU_INT_DISABLE
, 0);
5409 #ifdef BNX2X_STOP_ON_ERROR
5410 if (unlikely(bp
->panic
))
5414 if (CNIC_LOADED(bp
)) {
5415 struct cnic_ops
*c_ops
;
5418 c_ops
= rcu_dereference(bp
->cnic_ops
);
5420 c_ops
->cnic_handler(bp
->cnic_data
, NULL
);
5424 /* schedule sp task to perform default status block work, ack
5425 * attentions and enable interrupts.
5427 bnx2x_schedule_sp_task(bp
);
5432 /* end of slow path */
5434 void bnx2x_drv_pulse(struct bnx2x
*bp
)
5436 SHMEM_WR(bp
, func_mb
[BP_FW_MB_IDX(bp
)].drv_pulse_mb
,
5437 bp
->fw_drv_pulse_wr_seq
);
5440 static void bnx2x_timer(unsigned long data
)
5442 struct bnx2x
*bp
= (struct bnx2x
*) data
;
5444 if (!netif_running(bp
->dev
))
5449 int mb_idx
= BP_FW_MB_IDX(bp
);
5453 ++bp
->fw_drv_pulse_wr_seq
;
5454 bp
->fw_drv_pulse_wr_seq
&= DRV_PULSE_SEQ_MASK
;
5455 /* TBD - add SYSTEM_TIME */
5456 drv_pulse
= bp
->fw_drv_pulse_wr_seq
;
5457 bnx2x_drv_pulse(bp
);
5459 mcp_pulse
= (SHMEM_RD(bp
, func_mb
[mb_idx
].mcp_pulse_mb
) &
5460 MCP_PULSE_SEQ_MASK
);
5461 /* The delta between driver pulse and mcp response
5462 * should be 1 (before mcp response) or 0 (after mcp response)
5464 if ((drv_pulse
!= mcp_pulse
) &&
5465 (drv_pulse
!= ((mcp_pulse
+ 1) & MCP_PULSE_SEQ_MASK
))) {
5466 /* someone lost a heartbeat... */
5467 BNX2X_ERR("drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
5468 drv_pulse
, mcp_pulse
);
5472 if (bp
->state
== BNX2X_STATE_OPEN
)
5473 bnx2x_stats_handle(bp
, STATS_EVENT_UPDATE
);
5475 /* sample pf vf bulletin board for new posts from pf */
5477 bnx2x_timer_sriov(bp
);
5479 mod_timer(&bp
->timer
, jiffies
+ bp
->current_interval
);
5482 /* end of Statistics */
5487 * nic init service functions
5490 static void bnx2x_fill(struct bnx2x
*bp
, u32 addr
, int fill
, u32 len
)
5493 if (!(len
%4) && !(addr
%4))
5494 for (i
= 0; i
< len
; i
+= 4)
5495 REG_WR(bp
, addr
+ i
, fill
);
5497 for (i
= 0; i
< len
; i
++)
5498 REG_WR8(bp
, addr
+ i
, fill
);
5501 /* helper: writes FP SP data to FW - data_size in dwords */
5502 static void bnx2x_wr_fp_sb_data(struct bnx2x
*bp
,
5508 for (index
= 0; index
< data_size
; index
++)
5509 REG_WR(bp
, BAR_CSTRORM_INTMEM
+
5510 CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id
) +
5512 *(sb_data_p
+ index
));
5515 static void bnx2x_zero_fp_sb(struct bnx2x
*bp
, int fw_sb_id
)
5519 struct hc_status_block_data_e2 sb_data_e2
;
5520 struct hc_status_block_data_e1x sb_data_e1x
;
5522 /* disable the function first */
5523 if (!CHIP_IS_E1x(bp
)) {
5524 memset(&sb_data_e2
, 0, sizeof(struct hc_status_block_data_e2
));
5525 sb_data_e2
.common
.state
= SB_DISABLED
;
5526 sb_data_e2
.common
.p_func
.vf_valid
= false;
5527 sb_data_p
= (u32
*)&sb_data_e2
;
5528 data_size
= sizeof(struct hc_status_block_data_e2
)/sizeof(u32
);
5530 memset(&sb_data_e1x
, 0,
5531 sizeof(struct hc_status_block_data_e1x
));
5532 sb_data_e1x
.common
.state
= SB_DISABLED
;
5533 sb_data_e1x
.common
.p_func
.vf_valid
= false;
5534 sb_data_p
= (u32
*)&sb_data_e1x
;
5535 data_size
= sizeof(struct hc_status_block_data_e1x
)/sizeof(u32
);
5537 bnx2x_wr_fp_sb_data(bp
, fw_sb_id
, sb_data_p
, data_size
);
5539 bnx2x_fill(bp
, BAR_CSTRORM_INTMEM
+
5540 CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id
), 0,
5541 CSTORM_STATUS_BLOCK_SIZE
);
5542 bnx2x_fill(bp
, BAR_CSTRORM_INTMEM
+
5543 CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id
), 0,
5544 CSTORM_SYNC_BLOCK_SIZE
);
5547 /* helper: writes SP SB data to FW */
5548 static void bnx2x_wr_sp_sb_data(struct bnx2x
*bp
,
5549 struct hc_sp_status_block_data
*sp_sb_data
)
5551 int func
= BP_FUNC(bp
);
5553 for (i
= 0; i
< sizeof(struct hc_sp_status_block_data
)/sizeof(u32
); i
++)
5554 REG_WR(bp
, BAR_CSTRORM_INTMEM
+
5555 CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func
) +
5557 *((u32
*)sp_sb_data
+ i
));
5560 static void bnx2x_zero_sp_sb(struct bnx2x
*bp
)
5562 int func
= BP_FUNC(bp
);
5563 struct hc_sp_status_block_data sp_sb_data
;
5564 memset(&sp_sb_data
, 0, sizeof(struct hc_sp_status_block_data
));
5566 sp_sb_data
.state
= SB_DISABLED
;
5567 sp_sb_data
.p_func
.vf_valid
= false;
5569 bnx2x_wr_sp_sb_data(bp
, &sp_sb_data
);
5571 bnx2x_fill(bp
, BAR_CSTRORM_INTMEM
+
5572 CSTORM_SP_STATUS_BLOCK_OFFSET(func
), 0,
5573 CSTORM_SP_STATUS_BLOCK_SIZE
);
5574 bnx2x_fill(bp
, BAR_CSTRORM_INTMEM
+
5575 CSTORM_SP_SYNC_BLOCK_OFFSET(func
), 0,
5576 CSTORM_SP_SYNC_BLOCK_SIZE
);
5579 static void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm
*hc_sm
,
5580 int igu_sb_id
, int igu_seg_id
)
5582 hc_sm
->igu_sb_id
= igu_sb_id
;
5583 hc_sm
->igu_seg_id
= igu_seg_id
;
5584 hc_sm
->timer_value
= 0xFF;
5585 hc_sm
->time_to_expire
= 0xFFFFFFFF;
5588 /* allocates state machine ids. */
5589 static void bnx2x_map_sb_state_machines(struct hc_index_data
*index_data
)
5591 /* zero out state machine indices */
5593 index_data
[HC_INDEX_ETH_RX_CQ_CONS
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5596 index_data
[HC_INDEX_OOO_TX_CQ_CONS
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5597 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS0
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5598 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS1
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5599 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS2
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5603 index_data
[HC_INDEX_ETH_RX_CQ_CONS
].flags
|=
5604 SM_RX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5607 index_data
[HC_INDEX_OOO_TX_CQ_CONS
].flags
|=
5608 SM_TX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5609 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS0
].flags
|=
5610 SM_TX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5611 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS1
].flags
|=
5612 SM_TX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5613 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS2
].flags
|=
5614 SM_TX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5617 void bnx2x_init_sb(struct bnx2x
*bp
, dma_addr_t mapping
, int vfid
,
5618 u8 vf_valid
, int fw_sb_id
, int igu_sb_id
)
5622 struct hc_status_block_data_e2 sb_data_e2
;
5623 struct hc_status_block_data_e1x sb_data_e1x
;
5624 struct hc_status_block_sm
*hc_sm_p
;
5628 if (CHIP_INT_MODE_IS_BC(bp
))
5629 igu_seg_id
= HC_SEG_ACCESS_NORM
;
5631 igu_seg_id
= IGU_SEG_ACCESS_NORM
;
5633 bnx2x_zero_fp_sb(bp
, fw_sb_id
);
5635 if (!CHIP_IS_E1x(bp
)) {
5636 memset(&sb_data_e2
, 0, sizeof(struct hc_status_block_data_e2
));
5637 sb_data_e2
.common
.state
= SB_ENABLED
;
5638 sb_data_e2
.common
.p_func
.pf_id
= BP_FUNC(bp
);
5639 sb_data_e2
.common
.p_func
.vf_id
= vfid
;
5640 sb_data_e2
.common
.p_func
.vf_valid
= vf_valid
;
5641 sb_data_e2
.common
.p_func
.vnic_id
= BP_VN(bp
);
5642 sb_data_e2
.common
.same_igu_sb_1b
= true;
5643 sb_data_e2
.common
.host_sb_addr
.hi
= U64_HI(mapping
);
5644 sb_data_e2
.common
.host_sb_addr
.lo
= U64_LO(mapping
);
5645 hc_sm_p
= sb_data_e2
.common
.state_machine
;
5646 sb_data_p
= (u32
*)&sb_data_e2
;
5647 data_size
= sizeof(struct hc_status_block_data_e2
)/sizeof(u32
);
5648 bnx2x_map_sb_state_machines(sb_data_e2
.index_data
);
5650 memset(&sb_data_e1x
, 0,
5651 sizeof(struct hc_status_block_data_e1x
));
5652 sb_data_e1x
.common
.state
= SB_ENABLED
;
5653 sb_data_e1x
.common
.p_func
.pf_id
= BP_FUNC(bp
);
5654 sb_data_e1x
.common
.p_func
.vf_id
= 0xff;
5655 sb_data_e1x
.common
.p_func
.vf_valid
= false;
5656 sb_data_e1x
.common
.p_func
.vnic_id
= BP_VN(bp
);
5657 sb_data_e1x
.common
.same_igu_sb_1b
= true;
5658 sb_data_e1x
.common
.host_sb_addr
.hi
= U64_HI(mapping
);
5659 sb_data_e1x
.common
.host_sb_addr
.lo
= U64_LO(mapping
);
5660 hc_sm_p
= sb_data_e1x
.common
.state_machine
;
5661 sb_data_p
= (u32
*)&sb_data_e1x
;
5662 data_size
= sizeof(struct hc_status_block_data_e1x
)/sizeof(u32
);
5663 bnx2x_map_sb_state_machines(sb_data_e1x
.index_data
);
5666 bnx2x_setup_ndsb_state_machine(&hc_sm_p
[SM_RX_ID
],
5667 igu_sb_id
, igu_seg_id
);
5668 bnx2x_setup_ndsb_state_machine(&hc_sm_p
[SM_TX_ID
],
5669 igu_sb_id
, igu_seg_id
);
5671 DP(NETIF_MSG_IFUP
, "Init FW SB %d\n", fw_sb_id
);
5673 /* write indices to HW - PCI guarantees endianity of regpairs */
5674 bnx2x_wr_fp_sb_data(bp
, fw_sb_id
, sb_data_p
, data_size
);
5677 static void bnx2x_update_coalesce_sb(struct bnx2x
*bp
, u8 fw_sb_id
,
5678 u16 tx_usec
, u16 rx_usec
)
5680 bnx2x_update_coalesce_sb_index(bp
, fw_sb_id
, HC_INDEX_ETH_RX_CQ_CONS
,
5682 bnx2x_update_coalesce_sb_index(bp
, fw_sb_id
,
5683 HC_INDEX_ETH_TX_CQ_CONS_COS0
, false,
5685 bnx2x_update_coalesce_sb_index(bp
, fw_sb_id
,
5686 HC_INDEX_ETH_TX_CQ_CONS_COS1
, false,
5688 bnx2x_update_coalesce_sb_index(bp
, fw_sb_id
,
5689 HC_INDEX_ETH_TX_CQ_CONS_COS2
, false,
5693 static void bnx2x_init_def_sb(struct bnx2x
*bp
)
5695 struct host_sp_status_block
*def_sb
= bp
->def_status_blk
;
5696 dma_addr_t mapping
= bp
->def_status_blk_mapping
;
5697 int igu_sp_sb_index
;
5699 int port
= BP_PORT(bp
);
5700 int func
= BP_FUNC(bp
);
5701 int reg_offset
, reg_offset_en5
;
5704 struct hc_sp_status_block_data sp_sb_data
;
5705 memset(&sp_sb_data
, 0, sizeof(struct hc_sp_status_block_data
));
5707 if (CHIP_INT_MODE_IS_BC(bp
)) {
5708 igu_sp_sb_index
= DEF_SB_IGU_ID
;
5709 igu_seg_id
= HC_SEG_ACCESS_DEF
;
5711 igu_sp_sb_index
= bp
->igu_dsb_id
;
5712 igu_seg_id
= IGU_SEG_ACCESS_DEF
;
5716 section
= ((u64
)mapping
) + offsetof(struct host_sp_status_block
,
5717 atten_status_block
);
5718 def_sb
->atten_status_block
.status_block_id
= igu_sp_sb_index
;
5722 reg_offset
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0
:
5723 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0
);
5724 reg_offset_en5
= (port
? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0
:
5725 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0
);
5726 for (index
= 0; index
< MAX_DYNAMIC_ATTN_GRPS
; index
++) {
5728 /* take care of sig[0]..sig[4] */
5729 for (sindex
= 0; sindex
< 4; sindex
++)
5730 bp
->attn_group
[index
].sig
[sindex
] =
5731 REG_RD(bp
, reg_offset
+ sindex
*0x4 + 0x10*index
);
5733 if (!CHIP_IS_E1x(bp
))
5735 * enable5 is separate from the rest of the registers,
5736 * and therefore the address skip is 4
5737 * and not 16 between the different groups
5739 bp
->attn_group
[index
].sig
[4] = REG_RD(bp
,
5740 reg_offset_en5
+ 0x4*index
);
5742 bp
->attn_group
[index
].sig
[4] = 0;
5745 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
5746 reg_offset
= (port
? HC_REG_ATTN_MSG1_ADDR_L
:
5747 HC_REG_ATTN_MSG0_ADDR_L
);
5749 REG_WR(bp
, reg_offset
, U64_LO(section
));
5750 REG_WR(bp
, reg_offset
+ 4, U64_HI(section
));
5751 } else if (!CHIP_IS_E1x(bp
)) {
5752 REG_WR(bp
, IGU_REG_ATTN_MSG_ADDR_L
, U64_LO(section
));
5753 REG_WR(bp
, IGU_REG_ATTN_MSG_ADDR_H
, U64_HI(section
));
5756 section
= ((u64
)mapping
) + offsetof(struct host_sp_status_block
,
5759 bnx2x_zero_sp_sb(bp
);
5761 /* PCI guarantees endianity of regpairs */
5762 sp_sb_data
.state
= SB_ENABLED
;
5763 sp_sb_data
.host_sb_addr
.lo
= U64_LO(section
);
5764 sp_sb_data
.host_sb_addr
.hi
= U64_HI(section
);
5765 sp_sb_data
.igu_sb_id
= igu_sp_sb_index
;
5766 sp_sb_data
.igu_seg_id
= igu_seg_id
;
5767 sp_sb_data
.p_func
.pf_id
= func
;
5768 sp_sb_data
.p_func
.vnic_id
= BP_VN(bp
);
5769 sp_sb_data
.p_func
.vf_id
= 0xff;
5771 bnx2x_wr_sp_sb_data(bp
, &sp_sb_data
);
5773 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
, USTORM_ID
, 0, IGU_INT_ENABLE
, 0);
5776 void bnx2x_update_coalesce(struct bnx2x
*bp
)
5780 for_each_eth_queue(bp
, i
)
5781 bnx2x_update_coalesce_sb(bp
, bp
->fp
[i
].fw_sb_id
,
5782 bp
->tx_ticks
, bp
->rx_ticks
);
5785 static void bnx2x_init_sp_ring(struct bnx2x
*bp
)
5787 spin_lock_init(&bp
->spq_lock
);
5788 atomic_set(&bp
->cq_spq_left
, MAX_SPQ_PENDING
);
5790 bp
->spq_prod_idx
= 0;
5791 bp
->dsb_sp_prod
= BNX2X_SP_DSB_INDEX
;
5792 bp
->spq_prod_bd
= bp
->spq
;
5793 bp
->spq_last_bd
= bp
->spq_prod_bd
+ MAX_SP_DESC_CNT
;
5796 static void bnx2x_init_eq_ring(struct bnx2x
*bp
)
5799 for (i
= 1; i
<= NUM_EQ_PAGES
; i
++) {
5800 union event_ring_elem
*elem
=
5801 &bp
->eq_ring
[EQ_DESC_CNT_PAGE
* i
- 1];
5803 elem
->next_page
.addr
.hi
=
5804 cpu_to_le32(U64_HI(bp
->eq_mapping
+
5805 BCM_PAGE_SIZE
* (i
% NUM_EQ_PAGES
)));
5806 elem
->next_page
.addr
.lo
=
5807 cpu_to_le32(U64_LO(bp
->eq_mapping
+
5808 BCM_PAGE_SIZE
*(i
% NUM_EQ_PAGES
)));
5811 bp
->eq_prod
= NUM_EQ_DESC
;
5812 bp
->eq_cons_sb
= BNX2X_EQ_INDEX
;
5813 /* we want a warning message before it gets wrought... */
5814 atomic_set(&bp
->eq_spq_left
,
5815 min_t(int, MAX_SP_DESC_CNT
- MAX_SPQ_PENDING
, NUM_EQ_DESC
) - 1);
5818 /* called with netif_addr_lock_bh() */
5819 int bnx2x_set_q_rx_mode(struct bnx2x
*bp
, u8 cl_id
,
5820 unsigned long rx_mode_flags
,
5821 unsigned long rx_accept_flags
,
5822 unsigned long tx_accept_flags
,
5823 unsigned long ramrod_flags
)
5825 struct bnx2x_rx_mode_ramrod_params ramrod_param
;
5828 memset(&ramrod_param
, 0, sizeof(ramrod_param
));
5830 /* Prepare ramrod parameters */
5831 ramrod_param
.cid
= 0;
5832 ramrod_param
.cl_id
= cl_id
;
5833 ramrod_param
.rx_mode_obj
= &bp
->rx_mode_obj
;
5834 ramrod_param
.func_id
= BP_FUNC(bp
);
5836 ramrod_param
.pstate
= &bp
->sp_state
;
5837 ramrod_param
.state
= BNX2X_FILTER_RX_MODE_PENDING
;
5839 ramrod_param
.rdata
= bnx2x_sp(bp
, rx_mode_rdata
);
5840 ramrod_param
.rdata_mapping
= bnx2x_sp_mapping(bp
, rx_mode_rdata
);
5842 set_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
);
5844 ramrod_param
.ramrod_flags
= ramrod_flags
;
5845 ramrod_param
.rx_mode_flags
= rx_mode_flags
;
5847 ramrod_param
.rx_accept_flags
= rx_accept_flags
;
5848 ramrod_param
.tx_accept_flags
= tx_accept_flags
;
5850 rc
= bnx2x_config_rx_mode(bp
, &ramrod_param
);
5852 BNX2X_ERR("Set rx_mode %d failed\n", bp
->rx_mode
);
5859 static int bnx2x_fill_accept_flags(struct bnx2x
*bp
, u32 rx_mode
,
5860 unsigned long *rx_accept_flags
,
5861 unsigned long *tx_accept_flags
)
5863 /* Clear the flags first */
5864 *rx_accept_flags
= 0;
5865 *tx_accept_flags
= 0;
5868 case BNX2X_RX_MODE_NONE
:
5870 * 'drop all' supersedes any accept flags that may have been
5871 * passed to the function.
5874 case BNX2X_RX_MODE_NORMAL
:
5875 __set_bit(BNX2X_ACCEPT_UNICAST
, rx_accept_flags
);
5876 __set_bit(BNX2X_ACCEPT_MULTICAST
, rx_accept_flags
);
5877 __set_bit(BNX2X_ACCEPT_BROADCAST
, rx_accept_flags
);
5879 /* internal switching mode */
5880 __set_bit(BNX2X_ACCEPT_UNICAST
, tx_accept_flags
);
5881 __set_bit(BNX2X_ACCEPT_MULTICAST
, tx_accept_flags
);
5882 __set_bit(BNX2X_ACCEPT_BROADCAST
, tx_accept_flags
);
5885 case BNX2X_RX_MODE_ALLMULTI
:
5886 __set_bit(BNX2X_ACCEPT_UNICAST
, rx_accept_flags
);
5887 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, rx_accept_flags
);
5888 __set_bit(BNX2X_ACCEPT_BROADCAST
, rx_accept_flags
);
5890 /* internal switching mode */
5891 __set_bit(BNX2X_ACCEPT_UNICAST
, tx_accept_flags
);
5892 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, tx_accept_flags
);
5893 __set_bit(BNX2X_ACCEPT_BROADCAST
, tx_accept_flags
);
5896 case BNX2X_RX_MODE_PROMISC
:
5897 /* According to definition of SI mode, iface in promisc mode
5898 * should receive matched and unmatched (in resolution of port)
5901 __set_bit(BNX2X_ACCEPT_UNMATCHED
, rx_accept_flags
);
5902 __set_bit(BNX2X_ACCEPT_UNICAST
, rx_accept_flags
);
5903 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, rx_accept_flags
);
5904 __set_bit(BNX2X_ACCEPT_BROADCAST
, rx_accept_flags
);
5906 /* internal switching mode */
5907 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, tx_accept_flags
);
5908 __set_bit(BNX2X_ACCEPT_BROADCAST
, tx_accept_flags
);
5911 __set_bit(BNX2X_ACCEPT_ALL_UNICAST
, tx_accept_flags
);
5913 __set_bit(BNX2X_ACCEPT_UNICAST
, tx_accept_flags
);
5917 BNX2X_ERR("Unknown rx_mode: %d\n", rx_mode
);
5921 /* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
5922 if (bp
->rx_mode
!= BNX2X_RX_MODE_NONE
) {
5923 __set_bit(BNX2X_ACCEPT_ANY_VLAN
, rx_accept_flags
);
5924 __set_bit(BNX2X_ACCEPT_ANY_VLAN
, tx_accept_flags
);
5930 /* called with netif_addr_lock_bh() */
5931 int bnx2x_set_storm_rx_mode(struct bnx2x
*bp
)
5933 unsigned long rx_mode_flags
= 0, ramrod_flags
= 0;
5934 unsigned long rx_accept_flags
= 0, tx_accept_flags
= 0;
5938 /* Configure rx_mode of FCoE Queue */
5939 __set_bit(BNX2X_RX_MODE_FCOE_ETH
, &rx_mode_flags
);
5941 rc
= bnx2x_fill_accept_flags(bp
, bp
->rx_mode
, &rx_accept_flags
,
5946 __set_bit(RAMROD_RX
, &ramrod_flags
);
5947 __set_bit(RAMROD_TX
, &ramrod_flags
);
5949 return bnx2x_set_q_rx_mode(bp
, bp
->fp
->cl_id
, rx_mode_flags
,
5950 rx_accept_flags
, tx_accept_flags
,
5954 static void bnx2x_init_internal_common(struct bnx2x
*bp
)
5960 * In switch independent mode, the TSTORM needs to accept
5961 * packets that failed classification, since approximate match
5962 * mac addresses aren't written to NIG LLH
5964 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+
5965 TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET
, 2);
5966 else if (!CHIP_IS_E1(bp
)) /* 57710 doesn't support MF */
5967 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+
5968 TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET
, 0);
5970 /* Zero this manually as its initialization is
5971 currently missing in the initTool */
5972 for (i
= 0; i
< (USTORM_AGG_DATA_SIZE
>> 2); i
++)
5973 REG_WR(bp
, BAR_USTRORM_INTMEM
+
5974 USTORM_AGG_DATA_OFFSET
+ i
* 4, 0);
5975 if (!CHIP_IS_E1x(bp
)) {
5976 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+ CSTORM_IGU_MODE_OFFSET
,
5977 CHIP_INT_MODE_IS_BC(bp
) ?
5978 HC_IGU_BC_MODE
: HC_IGU_NBC_MODE
);
5982 static void bnx2x_init_internal(struct bnx2x
*bp
, u32 load_code
)
5984 switch (load_code
) {
5985 case FW_MSG_CODE_DRV_LOAD_COMMON
:
5986 case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
:
5987 bnx2x_init_internal_common(bp
);
5990 case FW_MSG_CODE_DRV_LOAD_PORT
:
5994 case FW_MSG_CODE_DRV_LOAD_FUNCTION
:
5995 /* internal memory per function is
5996 initialized inside bnx2x_pf_init */
6000 BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code
);
6005 static inline u8
bnx2x_fp_igu_sb_id(struct bnx2x_fastpath
*fp
)
6007 return fp
->bp
->igu_base_sb
+ fp
->index
+ CNIC_SUPPORT(fp
->bp
);
6010 static inline u8
bnx2x_fp_fw_sb_id(struct bnx2x_fastpath
*fp
)
6012 return fp
->bp
->base_fw_ndsb
+ fp
->index
+ CNIC_SUPPORT(fp
->bp
);
6015 static u8
bnx2x_fp_cl_id(struct bnx2x_fastpath
*fp
)
6017 if (CHIP_IS_E1x(fp
->bp
))
6018 return BP_L_ID(fp
->bp
) + fp
->index
;
6019 else /* We want Client ID to be the same as IGU SB ID for 57712 */
6020 return bnx2x_fp_igu_sb_id(fp
);
6023 static void bnx2x_init_eth_fp(struct bnx2x
*bp
, int fp_idx
)
6025 struct bnx2x_fastpath
*fp
= &bp
->fp
[fp_idx
];
6027 unsigned long q_type
= 0;
6028 u32 cids
[BNX2X_MULTI_TX_COS
] = { 0 };
6029 fp
->rx_queue
= fp_idx
;
6031 fp
->cl_id
= bnx2x_fp_cl_id(fp
);
6032 fp
->fw_sb_id
= bnx2x_fp_fw_sb_id(fp
);
6033 fp
->igu_sb_id
= bnx2x_fp_igu_sb_id(fp
);
6034 /* qZone id equals to FW (per path) client id */
6035 fp
->cl_qzone_id
= bnx2x_fp_qzone_id(fp
);
6038 fp
->ustorm_rx_prods_offset
= bnx2x_rx_ustorm_prods_offset(fp
);
6040 /* Setup SB indices */
6041 fp
->rx_cons_sb
= BNX2X_RX_SB_INDEX
;
6043 /* Configure Queue State object */
6044 __set_bit(BNX2X_Q_TYPE_HAS_RX
, &q_type
);
6045 __set_bit(BNX2X_Q_TYPE_HAS_TX
, &q_type
);
6047 BUG_ON(fp
->max_cos
> BNX2X_MULTI_TX_COS
);
6050 for_each_cos_in_tx_queue(fp
, cos
) {
6051 bnx2x_init_txdata(bp
, fp
->txdata_ptr
[cos
],
6052 CID_COS_TO_TX_ONLY_CID(fp
->cid
, cos
, bp
),
6053 FP_COS_TO_TXQ(fp
, cos
, bp
),
6054 BNX2X_TX_SB_INDEX_BASE
+ cos
, fp
);
6055 cids
[cos
] = fp
->txdata_ptr
[cos
]->cid
;
6058 /* nothing more for vf to do here */
6062 bnx2x_init_sb(bp
, fp
->status_blk_mapping
, BNX2X_VF_ID_INVALID
, false,
6063 fp
->fw_sb_id
, fp
->igu_sb_id
);
6064 bnx2x_update_fpsb_idx(fp
);
6065 bnx2x_init_queue_obj(bp
, &bnx2x_sp_obj(bp
, fp
).q_obj
, fp
->cl_id
, cids
,
6066 fp
->max_cos
, BP_FUNC(bp
), bnx2x_sp(bp
, q_rdata
),
6067 bnx2x_sp_mapping(bp
, q_rdata
), q_type
);
6070 * Configure classification DBs: Always enable Tx switching
6072 bnx2x_init_vlan_mac_fp_objs(fp
, BNX2X_OBJ_TYPE_RX_TX
);
6075 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n",
6076 fp_idx
, bp
, fp
->status_blk
.e2_sb
, fp
->cl_id
, fp
->fw_sb_id
,
6080 static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata
*txdata
)
6084 for (i
= 1; i
<= NUM_TX_RINGS
; i
++) {
6085 struct eth_tx_next_bd
*tx_next_bd
=
6086 &txdata
->tx_desc_ring
[TX_DESC_CNT
* i
- 1].next_bd
;
6088 tx_next_bd
->addr_hi
=
6089 cpu_to_le32(U64_HI(txdata
->tx_desc_mapping
+
6090 BCM_PAGE_SIZE
*(i
% NUM_TX_RINGS
)));
6091 tx_next_bd
->addr_lo
=
6092 cpu_to_le32(U64_LO(txdata
->tx_desc_mapping
+
6093 BCM_PAGE_SIZE
*(i
% NUM_TX_RINGS
)));
6096 *txdata
->tx_cons_sb
= cpu_to_le16(0);
6098 SET_FLAG(txdata
->tx_db
.data
.header
.header
, DOORBELL_HDR_DB_TYPE
, 1);
6099 txdata
->tx_db
.data
.zero_fill1
= 0;
6100 txdata
->tx_db
.data
.prod
= 0;
6102 txdata
->tx_pkt_prod
= 0;
6103 txdata
->tx_pkt_cons
= 0;
6104 txdata
->tx_bd_prod
= 0;
6105 txdata
->tx_bd_cons
= 0;
6109 static void bnx2x_init_tx_rings_cnic(struct bnx2x
*bp
)
6113 for_each_tx_queue_cnic(bp
, i
)
6114 bnx2x_init_tx_ring_one(bp
->fp
[i
].txdata_ptr
[0]);
6117 static void bnx2x_init_tx_rings(struct bnx2x
*bp
)
6122 for_each_eth_queue(bp
, i
)
6123 for_each_cos_in_tx_queue(&bp
->fp
[i
], cos
)
6124 bnx2x_init_tx_ring_one(bp
->fp
[i
].txdata_ptr
[cos
]);
6127 void bnx2x_nic_init_cnic(struct bnx2x
*bp
)
6130 bnx2x_init_fcoe_fp(bp
);
6132 bnx2x_init_sb(bp
, bp
->cnic_sb_mapping
,
6133 BNX2X_VF_ID_INVALID
, false,
6134 bnx2x_cnic_fw_sb_id(bp
), bnx2x_cnic_igu_sb_id(bp
));
6136 /* ensure status block indices were read */
6138 bnx2x_init_rx_rings_cnic(bp
);
6139 bnx2x_init_tx_rings_cnic(bp
);
6146 void bnx2x_pre_irq_nic_init(struct bnx2x
*bp
)
6150 /* Setup NIC internals and enable interrupts */
6151 for_each_eth_queue(bp
, i
)
6152 bnx2x_init_eth_fp(bp
, i
);
6154 /* ensure status block indices were read */
6156 bnx2x_init_rx_rings(bp
);
6157 bnx2x_init_tx_rings(bp
);
6160 /* Initialize MOD_ABS interrupts */
6161 bnx2x_init_mod_abs_int(bp
, &bp
->link_vars
, bp
->common
.chip_id
,
6162 bp
->common
.shmem_base
,
6163 bp
->common
.shmem2_base
, BP_PORT(bp
));
6165 /* initialize the default status block and sp ring */
6166 bnx2x_init_def_sb(bp
);
6167 bnx2x_update_dsb_idx(bp
);
6168 bnx2x_init_sp_ring(bp
);
6170 bnx2x_memset_stats(bp
);
6174 void bnx2x_post_irq_nic_init(struct bnx2x
*bp
, u32 load_code
)
6176 bnx2x_init_eq_ring(bp
);
6177 bnx2x_init_internal(bp
, load_code
);
6179 bnx2x_stats_init(bp
);
6181 /* flush all before enabling interrupts */
6185 bnx2x_int_enable(bp
);
6187 /* Check for SPIO5 */
6188 bnx2x_attn_int_deasserted0(bp
,
6189 REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0
+ BP_PORT(bp
)*4) &
6190 AEU_INPUTS_ATTN_BITS_SPIO5
);
6193 /* gzip service functions */
6194 static int bnx2x_gunzip_init(struct bnx2x
*bp
)
6196 bp
->gunzip_buf
= dma_alloc_coherent(&bp
->pdev
->dev
, FW_BUF_SIZE
,
6197 &bp
->gunzip_mapping
, GFP_KERNEL
);
6198 if (bp
->gunzip_buf
== NULL
)
6201 bp
->strm
= kmalloc(sizeof(*bp
->strm
), GFP_KERNEL
);
6202 if (bp
->strm
== NULL
)
6205 bp
->strm
->workspace
= vmalloc(zlib_inflate_workspacesize());
6206 if (bp
->strm
->workspace
== NULL
)
6216 dma_free_coherent(&bp
->pdev
->dev
, FW_BUF_SIZE
, bp
->gunzip_buf
,
6217 bp
->gunzip_mapping
);
6218 bp
->gunzip_buf
= NULL
;
6221 BNX2X_ERR("Cannot allocate firmware buffer for un-compression\n");
6225 static void bnx2x_gunzip_end(struct bnx2x
*bp
)
6228 vfree(bp
->strm
->workspace
);
6233 if (bp
->gunzip_buf
) {
6234 dma_free_coherent(&bp
->pdev
->dev
, FW_BUF_SIZE
, bp
->gunzip_buf
,
6235 bp
->gunzip_mapping
);
6236 bp
->gunzip_buf
= NULL
;
6240 static int bnx2x_gunzip(struct bnx2x
*bp
, const u8
*zbuf
, int len
)
6244 /* check gzip header */
6245 if ((zbuf
[0] != 0x1f) || (zbuf
[1] != 0x8b) || (zbuf
[2] != Z_DEFLATED
)) {
6246 BNX2X_ERR("Bad gzip header\n");
6254 if (zbuf
[3] & FNAME
)
6255 while ((zbuf
[n
++] != 0) && (n
< len
));
6257 bp
->strm
->next_in
= (typeof(bp
->strm
->next_in
))zbuf
+ n
;
6258 bp
->strm
->avail_in
= len
- n
;
6259 bp
->strm
->next_out
= bp
->gunzip_buf
;
6260 bp
->strm
->avail_out
= FW_BUF_SIZE
;
6262 rc
= zlib_inflateInit2(bp
->strm
, -MAX_WBITS
);
6266 rc
= zlib_inflate(bp
->strm
, Z_FINISH
);
6267 if ((rc
!= Z_OK
) && (rc
!= Z_STREAM_END
))
6268 netdev_err(bp
->dev
, "Firmware decompression error: %s\n",
6271 bp
->gunzip_outlen
= (FW_BUF_SIZE
- bp
->strm
->avail_out
);
6272 if (bp
->gunzip_outlen
& 0x3)
6274 "Firmware decompression error: gunzip_outlen (%d) not aligned\n",
6276 bp
->gunzip_outlen
>>= 2;
6278 zlib_inflateEnd(bp
->strm
);
6280 if (rc
== Z_STREAM_END
)
6286 /* nic load/unload */
6289 * General service functions
6292 /* send a NIG loopback debug packet */
6293 static void bnx2x_lb_pckt(struct bnx2x
*bp
)
6297 /* Ethernet source and destination addresses */
6298 wb_write
[0] = 0x55555555;
6299 wb_write
[1] = 0x55555555;
6300 wb_write
[2] = 0x20; /* SOP */
6301 REG_WR_DMAE(bp
, NIG_REG_DEBUG_PACKET_LB
, wb_write
, 3);
6303 /* NON-IP protocol */
6304 wb_write
[0] = 0x09000000;
6305 wb_write
[1] = 0x55555555;
6306 wb_write
[2] = 0x10; /* EOP, eop_bvalid = 0 */
6307 REG_WR_DMAE(bp
, NIG_REG_DEBUG_PACKET_LB
, wb_write
, 3);
6310 /* some of the internal memories
6311 * are not directly readable from the driver
6312 * to test them we send debug packets
6314 static int bnx2x_int_mem_test(struct bnx2x
*bp
)
6320 if (CHIP_REV_IS_FPGA(bp
))
6322 else if (CHIP_REV_IS_EMUL(bp
))
6327 /* Disable inputs of parser neighbor blocks */
6328 REG_WR(bp
, TSDM_REG_ENABLE_IN1
, 0x0);
6329 REG_WR(bp
, TCM_REG_PRS_IFEN
, 0x0);
6330 REG_WR(bp
, CFC_REG_DEBUG0
, 0x1);
6331 REG_WR(bp
, NIG_REG_PRS_REQ_IN_EN
, 0x0);
6333 /* Write 0 to parser credits for CFC search request */
6334 REG_WR(bp
, PRS_REG_CFC_SEARCH_INITIAL_CREDIT
, 0x0);
6336 /* send Ethernet packet */
6339 /* TODO do i reset NIG statistic? */
6340 /* Wait until NIG register shows 1 packet of size 0x10 */
6341 count
= 1000 * factor
;
6344 bnx2x_read_dmae(bp
, NIG_REG_STAT2_BRB_OCTET
, 2);
6345 val
= *bnx2x_sp(bp
, wb_data
[0]);
6349 usleep_range(10000, 20000);
6353 BNX2X_ERR("NIG timeout val = 0x%x\n", val
);
6357 /* Wait until PRS register shows 1 packet */
6358 count
= 1000 * factor
;
6360 val
= REG_RD(bp
, PRS_REG_NUM_OF_PACKETS
);
6364 usleep_range(10000, 20000);
6368 BNX2X_ERR("PRS timeout val = 0x%x\n", val
);
6372 /* Reset and init BRB, PRS */
6373 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
, 0x03);
6375 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
, 0x03);
6377 bnx2x_init_block(bp
, BLOCK_BRB1
, PHASE_COMMON
);
6378 bnx2x_init_block(bp
, BLOCK_PRS
, PHASE_COMMON
);
6380 DP(NETIF_MSG_HW
, "part2\n");
6382 /* Disable inputs of parser neighbor blocks */
6383 REG_WR(bp
, TSDM_REG_ENABLE_IN1
, 0x0);
6384 REG_WR(bp
, TCM_REG_PRS_IFEN
, 0x0);
6385 REG_WR(bp
, CFC_REG_DEBUG0
, 0x1);
6386 REG_WR(bp
, NIG_REG_PRS_REQ_IN_EN
, 0x0);
6388 /* Write 0 to parser credits for CFC search request */
6389 REG_WR(bp
, PRS_REG_CFC_SEARCH_INITIAL_CREDIT
, 0x0);
6391 /* send 10 Ethernet packets */
6392 for (i
= 0; i
< 10; i
++)
6395 /* Wait until NIG register shows 10 + 1
6396 packets of size 11*0x10 = 0xb0 */
6397 count
= 1000 * factor
;
6400 bnx2x_read_dmae(bp
, NIG_REG_STAT2_BRB_OCTET
, 2);
6401 val
= *bnx2x_sp(bp
, wb_data
[0]);
6405 usleep_range(10000, 20000);
6409 BNX2X_ERR("NIG timeout val = 0x%x\n", val
);
6413 /* Wait until PRS register shows 2 packets */
6414 val
= REG_RD(bp
, PRS_REG_NUM_OF_PACKETS
);
6416 BNX2X_ERR("PRS timeout val = 0x%x\n", val
);
6418 /* Write 1 to parser credits for CFC search request */
6419 REG_WR(bp
, PRS_REG_CFC_SEARCH_INITIAL_CREDIT
, 0x1);
6421 /* Wait until PRS register shows 3 packets */
6422 msleep(10 * factor
);
6423 /* Wait until NIG register shows 1 packet of size 0x10 */
6424 val
= REG_RD(bp
, PRS_REG_NUM_OF_PACKETS
);
6426 BNX2X_ERR("PRS timeout val = 0x%x\n", val
);
6428 /* clear NIG EOP FIFO */
6429 for (i
= 0; i
< 11; i
++)
6430 REG_RD(bp
, NIG_REG_INGRESS_EOP_LB_FIFO
);
6431 val
= REG_RD(bp
, NIG_REG_INGRESS_EOP_LB_EMPTY
);
6433 BNX2X_ERR("clear of NIG failed\n");
6437 /* Reset and init BRB, PRS, NIG */
6438 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
, 0x03);
6440 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
, 0x03);
6442 bnx2x_init_block(bp
, BLOCK_BRB1
, PHASE_COMMON
);
6443 bnx2x_init_block(bp
, BLOCK_PRS
, PHASE_COMMON
);
6444 if (!CNIC_SUPPORT(bp
))
6446 REG_WR(bp
, PRS_REG_NIC_MODE
, 1);
6448 /* Enable inputs of parser neighbor blocks */
6449 REG_WR(bp
, TSDM_REG_ENABLE_IN1
, 0x7fffffff);
6450 REG_WR(bp
, TCM_REG_PRS_IFEN
, 0x1);
6451 REG_WR(bp
, CFC_REG_DEBUG0
, 0x0);
6452 REG_WR(bp
, NIG_REG_PRS_REQ_IN_EN
, 0x1);
6454 DP(NETIF_MSG_HW
, "done\n");
6459 static void bnx2x_enable_blocks_attention(struct bnx2x
*bp
)
6463 REG_WR(bp
, PXP_REG_PXP_INT_MASK_0
, 0);
6464 if (!CHIP_IS_E1x(bp
))
6465 REG_WR(bp
, PXP_REG_PXP_INT_MASK_1
, 0x40);
6467 REG_WR(bp
, PXP_REG_PXP_INT_MASK_1
, 0);
6468 REG_WR(bp
, DORQ_REG_DORQ_INT_MASK
, 0);
6469 REG_WR(bp
, CFC_REG_CFC_INT_MASK
, 0);
6471 * mask read length error interrupts in brb for parser
6472 * (parsing unit and 'checksum and crc' unit)
6473 * these errors are legal (PU reads fixed length and CAC can cause
6474 * read length error on truncated packets)
6476 REG_WR(bp
, BRB1_REG_BRB1_INT_MASK
, 0xFC00);
6477 REG_WR(bp
, QM_REG_QM_INT_MASK
, 0);
6478 REG_WR(bp
, TM_REG_TM_INT_MASK
, 0);
6479 REG_WR(bp
, XSDM_REG_XSDM_INT_MASK_0
, 0);
6480 REG_WR(bp
, XSDM_REG_XSDM_INT_MASK_1
, 0);
6481 REG_WR(bp
, XCM_REG_XCM_INT_MASK
, 0);
6482 /* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */
6483 /* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */
6484 REG_WR(bp
, USDM_REG_USDM_INT_MASK_0
, 0);
6485 REG_WR(bp
, USDM_REG_USDM_INT_MASK_1
, 0);
6486 REG_WR(bp
, UCM_REG_UCM_INT_MASK
, 0);
6487 /* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */
6488 /* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */
6489 REG_WR(bp
, GRCBASE_UPB
+ PB_REG_PB_INT_MASK
, 0);
6490 REG_WR(bp
, CSDM_REG_CSDM_INT_MASK_0
, 0);
6491 REG_WR(bp
, CSDM_REG_CSDM_INT_MASK_1
, 0);
6492 REG_WR(bp
, CCM_REG_CCM_INT_MASK
, 0);
6493 /* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */
6494 /* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */
6496 val
= PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT
|
6497 PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF
|
6498 PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN
;
6499 if (!CHIP_IS_E1x(bp
))
6500 val
|= PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED
|
6501 PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED
;
6502 REG_WR(bp
, PXP2_REG_PXP2_INT_MASK_0
, val
);
6504 REG_WR(bp
, TSDM_REG_TSDM_INT_MASK_0
, 0);
6505 REG_WR(bp
, TSDM_REG_TSDM_INT_MASK_1
, 0);
6506 REG_WR(bp
, TCM_REG_TCM_INT_MASK
, 0);
6507 /* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */
6509 if (!CHIP_IS_E1x(bp
))
6510 /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
6511 REG_WR(bp
, TSEM_REG_TSEM_INT_MASK_1
, 0x07ff);
6513 REG_WR(bp
, CDU_REG_CDU_INT_MASK
, 0);
6514 REG_WR(bp
, DMAE_REG_DMAE_INT_MASK
, 0);
6515 /* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
6516 REG_WR(bp
, PBF_REG_PBF_INT_MASK
, 0x18); /* bit 3,4 masked */
6519 static void bnx2x_reset_common(struct bnx2x
*bp
)
6524 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
,
6527 if (CHIP_IS_E3(bp
)) {
6528 val
|= MISC_REGISTERS_RESET_REG_2_MSTAT0
;
6529 val
|= MISC_REGISTERS_RESET_REG_2_MSTAT1
;
6532 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_2_CLEAR
, val
);
6535 static void bnx2x_setup_dmae(struct bnx2x
*bp
)
6538 spin_lock_init(&bp
->dmae_lock
);
6541 static void bnx2x_init_pxp(struct bnx2x
*bp
)
6544 int r_order
, w_order
;
6546 pcie_capability_read_word(bp
->pdev
, PCI_EXP_DEVCTL
, &devctl
);
6547 DP(NETIF_MSG_HW
, "read 0x%x from devctl\n", devctl
);
6548 w_order
= ((devctl
& PCI_EXP_DEVCTL_PAYLOAD
) >> 5);
6550 r_order
= ((devctl
& PCI_EXP_DEVCTL_READRQ
) >> 12);
6552 DP(NETIF_MSG_HW
, "force read order to %d\n", bp
->mrrs
);
6556 bnx2x_init_pxp_arb(bp
, r_order
, w_order
);
6559 static void bnx2x_setup_fan_failure_detection(struct bnx2x
*bp
)
6569 val
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.config2
) &
6570 SHARED_HW_CFG_FAN_FAILURE_MASK
;
6572 if (val
== SHARED_HW_CFG_FAN_FAILURE_ENABLED
)
6576 * The fan failure mechanism is usually related to the PHY type since
6577 * the power consumption of the board is affected by the PHY. Currently,
6578 * fan is required for most designs with SFX7101, BCM8727 and BCM8481.
6580 else if (val
== SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE
)
6581 for (port
= PORT_0
; port
< PORT_MAX
; port
++) {
6583 bnx2x_fan_failure_det_req(
6585 bp
->common
.shmem_base
,
6586 bp
->common
.shmem2_base
,
6590 DP(NETIF_MSG_HW
, "fan detection setting: %d\n", is_required
);
6592 if (is_required
== 0)
6595 /* Fan failure is indicated by SPIO 5 */
6596 bnx2x_set_spio(bp
, MISC_SPIO_SPIO5
, MISC_SPIO_INPUT_HI_Z
);
6598 /* set to active low mode */
6599 val
= REG_RD(bp
, MISC_REG_SPIO_INT
);
6600 val
|= (MISC_SPIO_SPIO5
<< MISC_SPIO_INT_OLD_SET_POS
);
6601 REG_WR(bp
, MISC_REG_SPIO_INT
, val
);
6603 /* enable interrupt to signal the IGU */
6604 val
= REG_RD(bp
, MISC_REG_SPIO_EVENT_EN
);
6605 val
|= MISC_SPIO_SPIO5
;
6606 REG_WR(bp
, MISC_REG_SPIO_EVENT_EN
, val
);
6609 void bnx2x_pf_disable(struct bnx2x
*bp
)
6611 u32 val
= REG_RD(bp
, IGU_REG_PF_CONFIGURATION
);
6612 val
&= ~IGU_PF_CONF_FUNC_EN
;
6614 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, val
);
6615 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 0);
6616 REG_WR(bp
, CFC_REG_WEAK_ENABLE_PF
, 0);
6619 static void bnx2x__common_init_phy(struct bnx2x
*bp
)
6621 u32 shmem_base
[2], shmem2_base
[2];
6622 /* Avoid common init in case MFW supports LFA */
6623 if (SHMEM2_RD(bp
, size
) >
6624 (u32
)offsetof(struct shmem2_region
, lfa_host_addr
[BP_PORT(bp
)]))
6626 shmem_base
[0] = bp
->common
.shmem_base
;
6627 shmem2_base
[0] = bp
->common
.shmem2_base
;
6628 if (!CHIP_IS_E1x(bp
)) {
6630 SHMEM2_RD(bp
, other_shmem_base_addr
);
6632 SHMEM2_RD(bp
, other_shmem2_base_addr
);
6634 bnx2x_acquire_phy_lock(bp
);
6635 bnx2x_common_init_phy(bp
, shmem_base
, shmem2_base
,
6636 bp
->common
.chip_id
);
6637 bnx2x_release_phy_lock(bp
);
6641 * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
6643 * @bp: driver handle
6645 static int bnx2x_init_hw_common(struct bnx2x
*bp
)
6649 DP(NETIF_MSG_HW
, "starting common init func %d\n", BP_ABS_FUNC(bp
));
6652 * take the RESET lock to protect undi_unload flow from accessing
6653 * registers while we're resetting the chip
6655 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RESET
);
6657 bnx2x_reset_common(bp
);
6658 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
, 0xffffffff);
6661 if (CHIP_IS_E3(bp
)) {
6662 val
|= MISC_REGISTERS_RESET_REG_2_MSTAT0
;
6663 val
|= MISC_REGISTERS_RESET_REG_2_MSTAT1
;
6665 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_2_SET
, val
);
6667 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RESET
);
6669 bnx2x_init_block(bp
, BLOCK_MISC
, PHASE_COMMON
);
6671 if (!CHIP_IS_E1x(bp
)) {
6675 * 4-port mode or 2-port mode we need to turn of master-enable
6676 * for everyone, after that, turn it back on for self.
6677 * so, we disregard multi-function or not, and always disable
6678 * for all functions on the given path, this means 0,2,4,6 for
6679 * path 0 and 1,3,5,7 for path 1
6681 for (abs_func_id
= BP_PATH(bp
);
6682 abs_func_id
< E2_FUNC_MAX
*2; abs_func_id
+= 2) {
6683 if (abs_func_id
== BP_ABS_FUNC(bp
)) {
6685 PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
,
6690 bnx2x_pretend_func(bp
, abs_func_id
);
6691 /* clear pf enable */
6692 bnx2x_pf_disable(bp
);
6693 bnx2x_pretend_func(bp
, BP_ABS_FUNC(bp
));
6697 bnx2x_init_block(bp
, BLOCK_PXP
, PHASE_COMMON
);
6698 if (CHIP_IS_E1(bp
)) {
6699 /* enable HW interrupt from PXP on USDM overflow
6700 bit 16 on INT_MASK_0 */
6701 REG_WR(bp
, PXP_REG_PXP_INT_MASK_0
, 0);
6704 bnx2x_init_block(bp
, BLOCK_PXP2
, PHASE_COMMON
);
6708 REG_WR(bp
, PXP2_REG_RQ_QM_ENDIAN_M
, 1);
6709 REG_WR(bp
, PXP2_REG_RQ_TM_ENDIAN_M
, 1);
6710 REG_WR(bp
, PXP2_REG_RQ_SRC_ENDIAN_M
, 1);
6711 REG_WR(bp
, PXP2_REG_RQ_CDU_ENDIAN_M
, 1);
6712 REG_WR(bp
, PXP2_REG_RQ_DBG_ENDIAN_M
, 1);
6713 /* make sure this value is 0 */
6714 REG_WR(bp
, PXP2_REG_RQ_HC_ENDIAN_M
, 0);
6716 /* REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */
6717 REG_WR(bp
, PXP2_REG_RD_QM_SWAP_MODE
, 1);
6718 REG_WR(bp
, PXP2_REG_RD_TM_SWAP_MODE
, 1);
6719 REG_WR(bp
, PXP2_REG_RD_SRC_SWAP_MODE
, 1);
6720 REG_WR(bp
, PXP2_REG_RD_CDURD_SWAP_MODE
, 1);
6723 bnx2x_ilt_init_page_size(bp
, INITOP_SET
);
6725 if (CHIP_REV_IS_FPGA(bp
) && CHIP_IS_E1H(bp
))
6726 REG_WR(bp
, PXP2_REG_PGL_TAGS_LIMIT
, 0x1);
6728 /* let the HW do it's magic ... */
6730 /* finish PXP init */
6731 val
= REG_RD(bp
, PXP2_REG_RQ_CFG_DONE
);
6733 BNX2X_ERR("PXP2 CFG failed\n");
6736 val
= REG_RD(bp
, PXP2_REG_RD_INIT_DONE
);
6738 BNX2X_ERR("PXP2 RD_INIT failed\n");
6742 /* Timers bug workaround E2 only. We need to set the entire ILT to
6743 * have entries with value "0" and valid bit on.
6744 * This needs to be done by the first PF that is loaded in a path
6745 * (i.e. common phase)
6747 if (!CHIP_IS_E1x(bp
)) {
6748 /* In E2 there is a bug in the timers block that can cause function 6 / 7
6749 * (i.e. vnic3) to start even if it is marked as "scan-off".
6750 * This occurs when a different function (func2,3) is being marked
6751 * as "scan-off". Real-life scenario for example: if a driver is being
6752 * load-unloaded while func6,7 are down. This will cause the timer to access
6753 * the ilt, translate to a logical address and send a request to read/write.
6754 * Since the ilt for the function that is down is not valid, this will cause
6755 * a translation error which is unrecoverable.
6756 * The Workaround is intended to make sure that when this happens nothing fatal
6757 * will occur. The workaround:
6758 * 1. First PF driver which loads on a path will:
6759 * a. After taking the chip out of reset, by using pretend,
6760 * it will write "0" to the following registers of
6762 * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
6763 * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
6764 * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
6765 * And for itself it will write '1' to
6766 * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
6767 * dmae-operations (writing to pram for example.)
6768 * note: can be done for only function 6,7 but cleaner this
6770 * b. Write zero+valid to the entire ILT.
6771 * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of
6772 * VNIC3 (of that port). The range allocated will be the
6773 * entire ILT. This is needed to prevent ILT range error.
6774 * 2. Any PF driver load flow:
6775 * a. ILT update with the physical addresses of the allocated
6777 * b. Wait 20msec. - note that this timeout is needed to make
6778 * sure there are no requests in one of the PXP internal
6779 * queues with "old" ILT addresses.
6780 * c. PF enable in the PGLC.
6781 * d. Clear the was_error of the PF in the PGLC. (could have
6782 * occurred while driver was down)
6783 * e. PF enable in the CFC (WEAK + STRONG)
6784 * f. Timers scan enable
6785 * 3. PF driver unload flow:
6786 * a. Clear the Timers scan_en.
6787 * b. Polling for scan_on=0 for that PF.
6788 * c. Clear the PF enable bit in the PXP.
6789 * d. Clear the PF enable in the CFC (WEAK + STRONG)
6790 * e. Write zero+valid to all ILT entries (The valid bit must
6792 * f. If this is VNIC 3 of a port then also init
6793 * first_timers_ilt_entry to zero and last_timers_ilt_entry
6794 * to the last entry in the ILT.
6797 * Currently the PF error in the PGLC is non recoverable.
6798 * In the future the there will be a recovery routine for this error.
6799 * Currently attention is masked.
6800 * Having an MCP lock on the load/unload process does not guarantee that
6801 * there is no Timer disable during Func6/7 enable. This is because the
6802 * Timers scan is currently being cleared by the MCP on FLR.
6803 * Step 2.d can be done only for PF6/7 and the driver can also check if
6804 * there is error before clearing it. But the flow above is simpler and
6806 * All ILT entries are written by zero+valid and not just PF6/7
6807 * ILT entries since in the future the ILT entries allocation for
6808 * PF-s might be dynamic.
6810 struct ilt_client_info ilt_cli
;
6811 struct bnx2x_ilt ilt
;
6812 memset(&ilt_cli
, 0, sizeof(struct ilt_client_info
));
6813 memset(&ilt
, 0, sizeof(struct bnx2x_ilt
));
6815 /* initialize dummy TM client */
6817 ilt_cli
.end
= ILT_NUM_PAGE_ENTRIES
- 1;
6818 ilt_cli
.client_num
= ILT_CLIENT_TM
;
6820 /* Step 1: set zeroes to all ilt page entries with valid bit on
6821 * Step 2: set the timers first/last ilt entry to point
6822 * to the entire range to prevent ILT range error for 3rd/4th
6823 * vnic (this code assumes existence of the vnic)
6825 * both steps performed by call to bnx2x_ilt_client_init_op()
6826 * with dummy TM client
6828 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
6829 * and his brother are split registers
6831 bnx2x_pretend_func(bp
, (BP_PATH(bp
) + 6));
6832 bnx2x_ilt_client_init_op_ilt(bp
, &ilt
, &ilt_cli
, INITOP_CLEAR
);
6833 bnx2x_pretend_func(bp
, BP_ABS_FUNC(bp
));
6835 REG_WR(bp
, PXP2_REG_RQ_DRAM_ALIGN
, BNX2X_PXP_DRAM_ALIGN
);
6836 REG_WR(bp
, PXP2_REG_RQ_DRAM_ALIGN_RD
, BNX2X_PXP_DRAM_ALIGN
);
6837 REG_WR(bp
, PXP2_REG_RQ_DRAM_ALIGN_SEL
, 1);
6840 REG_WR(bp
, PXP2_REG_RQ_DISABLE_INPUTS
, 0);
6841 REG_WR(bp
, PXP2_REG_RD_DISABLE_INPUTS
, 0);
6843 if (!CHIP_IS_E1x(bp
)) {
6844 int factor
= CHIP_REV_IS_EMUL(bp
) ? 1000 :
6845 (CHIP_REV_IS_FPGA(bp
) ? 400 : 0);
6846 bnx2x_init_block(bp
, BLOCK_PGLUE_B
, PHASE_COMMON
);
6848 bnx2x_init_block(bp
, BLOCK_ATC
, PHASE_COMMON
);
6850 /* let the HW do it's magic ... */
6853 val
= REG_RD(bp
, ATC_REG_ATC_INIT_DONE
);
6854 } while (factor
-- && (val
!= 1));
6857 BNX2X_ERR("ATC_INIT failed\n");
6862 bnx2x_init_block(bp
, BLOCK_DMAE
, PHASE_COMMON
);
6864 bnx2x_iov_init_dmae(bp
);
6866 /* clean the DMAE memory */
6868 bnx2x_init_fill(bp
, TSEM_REG_PRAM
, 0, 8, 1);
6870 bnx2x_init_block(bp
, BLOCK_TCM
, PHASE_COMMON
);
6872 bnx2x_init_block(bp
, BLOCK_UCM
, PHASE_COMMON
);
6874 bnx2x_init_block(bp
, BLOCK_CCM
, PHASE_COMMON
);
6876 bnx2x_init_block(bp
, BLOCK_XCM
, PHASE_COMMON
);
6878 bnx2x_read_dmae(bp
, XSEM_REG_PASSIVE_BUFFER
, 3);
6879 bnx2x_read_dmae(bp
, CSEM_REG_PASSIVE_BUFFER
, 3);
6880 bnx2x_read_dmae(bp
, TSEM_REG_PASSIVE_BUFFER
, 3);
6881 bnx2x_read_dmae(bp
, USEM_REG_PASSIVE_BUFFER
, 3);
6883 bnx2x_init_block(bp
, BLOCK_QM
, PHASE_COMMON
);
6885 /* QM queues pointers table */
6886 bnx2x_qm_init_ptr_table(bp
, bp
->qm_cid_count
, INITOP_SET
);
6888 /* soft reset pulse */
6889 REG_WR(bp
, QM_REG_SOFT_RESET
, 1);
6890 REG_WR(bp
, QM_REG_SOFT_RESET
, 0);
6892 if (CNIC_SUPPORT(bp
))
6893 bnx2x_init_block(bp
, BLOCK_TM
, PHASE_COMMON
);
6895 bnx2x_init_block(bp
, BLOCK_DORQ
, PHASE_COMMON
);
6896 REG_WR(bp
, DORQ_REG_DPM_CID_OFST
, BNX2X_DB_SHIFT
);
6897 if (!CHIP_REV_IS_SLOW(bp
))
6898 /* enable hw interrupt from doorbell Q */
6899 REG_WR(bp
, DORQ_REG_DORQ_INT_MASK
, 0);
6901 bnx2x_init_block(bp
, BLOCK_BRB1
, PHASE_COMMON
);
6903 bnx2x_init_block(bp
, BLOCK_PRS
, PHASE_COMMON
);
6904 REG_WR(bp
, PRS_REG_A_PRSU_20
, 0xf);
6906 if (!CHIP_IS_E1(bp
))
6907 REG_WR(bp
, PRS_REG_E1HOV_MODE
, bp
->path_has_ovlan
);
6909 if (!CHIP_IS_E1x(bp
) && !CHIP_IS_E3B0(bp
)) {
6910 if (IS_MF_AFEX(bp
)) {
6911 /* configure that VNTag and VLAN headers must be
6912 * received in afex mode
6914 REG_WR(bp
, PRS_REG_HDRS_AFTER_BASIC
, 0xE);
6915 REG_WR(bp
, PRS_REG_MUST_HAVE_HDRS
, 0xA);
6916 REG_WR(bp
, PRS_REG_HDRS_AFTER_TAG_0
, 0x6);
6917 REG_WR(bp
, PRS_REG_TAG_ETHERTYPE_0
, 0x8926);
6918 REG_WR(bp
, PRS_REG_TAG_LEN_0
, 0x4);
6920 /* Bit-map indicating which L2 hdrs may appear
6921 * after the basic Ethernet header
6923 REG_WR(bp
, PRS_REG_HDRS_AFTER_BASIC
,
6924 bp
->path_has_ovlan
? 7 : 6);
6928 bnx2x_init_block(bp
, BLOCK_TSDM
, PHASE_COMMON
);
6929 bnx2x_init_block(bp
, BLOCK_CSDM
, PHASE_COMMON
);
6930 bnx2x_init_block(bp
, BLOCK_USDM
, PHASE_COMMON
);
6931 bnx2x_init_block(bp
, BLOCK_XSDM
, PHASE_COMMON
);
6933 if (!CHIP_IS_E1x(bp
)) {
6934 /* reset VFC memories */
6935 REG_WR(bp
, TSEM_REG_FAST_MEMORY
+ VFC_REG_MEMORIES_RST
,
6936 VFC_MEMORIES_RST_REG_CAM_RST
|
6937 VFC_MEMORIES_RST_REG_RAM_RST
);
6938 REG_WR(bp
, XSEM_REG_FAST_MEMORY
+ VFC_REG_MEMORIES_RST
,
6939 VFC_MEMORIES_RST_REG_CAM_RST
|
6940 VFC_MEMORIES_RST_REG_RAM_RST
);
6945 bnx2x_init_block(bp
, BLOCK_TSEM
, PHASE_COMMON
);
6946 bnx2x_init_block(bp
, BLOCK_USEM
, PHASE_COMMON
);
6947 bnx2x_init_block(bp
, BLOCK_CSEM
, PHASE_COMMON
);
6948 bnx2x_init_block(bp
, BLOCK_XSEM
, PHASE_COMMON
);
6951 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
,
6953 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
,
6956 bnx2x_init_block(bp
, BLOCK_UPB
, PHASE_COMMON
);
6957 bnx2x_init_block(bp
, BLOCK_XPB
, PHASE_COMMON
);
6958 bnx2x_init_block(bp
, BLOCK_PBF
, PHASE_COMMON
);
6960 if (!CHIP_IS_E1x(bp
)) {
6961 if (IS_MF_AFEX(bp
)) {
6962 /* configure that VNTag and VLAN headers must be
6965 REG_WR(bp
, PBF_REG_HDRS_AFTER_BASIC
, 0xE);
6966 REG_WR(bp
, PBF_REG_MUST_HAVE_HDRS
, 0xA);
6967 REG_WR(bp
, PBF_REG_HDRS_AFTER_TAG_0
, 0x6);
6968 REG_WR(bp
, PBF_REG_TAG_ETHERTYPE_0
, 0x8926);
6969 REG_WR(bp
, PBF_REG_TAG_LEN_0
, 0x4);
6971 REG_WR(bp
, PBF_REG_HDRS_AFTER_BASIC
,
6972 bp
->path_has_ovlan
? 7 : 6);
6976 REG_WR(bp
, SRC_REG_SOFT_RST
, 1);
6978 bnx2x_init_block(bp
, BLOCK_SRC
, PHASE_COMMON
);
6980 if (CNIC_SUPPORT(bp
)) {
6981 REG_WR(bp
, SRC_REG_KEYSEARCH_0
, 0x63285672);
6982 REG_WR(bp
, SRC_REG_KEYSEARCH_1
, 0x24b8f2cc);
6983 REG_WR(bp
, SRC_REG_KEYSEARCH_2
, 0x223aef9b);
6984 REG_WR(bp
, SRC_REG_KEYSEARCH_3
, 0x26001e3a);
6985 REG_WR(bp
, SRC_REG_KEYSEARCH_4
, 0x7ae91116);
6986 REG_WR(bp
, SRC_REG_KEYSEARCH_5
, 0x5ce5230b);
6987 REG_WR(bp
, SRC_REG_KEYSEARCH_6
, 0x298d8adf);
6988 REG_WR(bp
, SRC_REG_KEYSEARCH_7
, 0x6eb0ff09);
6989 REG_WR(bp
, SRC_REG_KEYSEARCH_8
, 0x1830f82f);
6990 REG_WR(bp
, SRC_REG_KEYSEARCH_9
, 0x01e46be7);
6992 REG_WR(bp
, SRC_REG_SOFT_RST
, 0);
6994 if (sizeof(union cdu_context
) != 1024)
6995 /* we currently assume that a context is 1024 bytes */
6996 dev_alert(&bp
->pdev
->dev
,
6997 "please adjust the size of cdu_context(%ld)\n",
6998 (long)sizeof(union cdu_context
));
7000 bnx2x_init_block(bp
, BLOCK_CDU
, PHASE_COMMON
);
7001 val
= (4 << 24) + (0 << 12) + 1024;
7002 REG_WR(bp
, CDU_REG_CDU_GLOBAL_PARAMS
, val
);
7004 bnx2x_init_block(bp
, BLOCK_CFC
, PHASE_COMMON
);
7005 REG_WR(bp
, CFC_REG_INIT_REG
, 0x7FF);
7006 /* enable context validation interrupt from CFC */
7007 REG_WR(bp
, CFC_REG_CFC_INT_MASK
, 0);
7009 /* set the thresholds to prevent CFC/CDU race */
7010 REG_WR(bp
, CFC_REG_DEBUG0
, 0x20020000);
7012 bnx2x_init_block(bp
, BLOCK_HC
, PHASE_COMMON
);
7014 if (!CHIP_IS_E1x(bp
) && BP_NOMCP(bp
))
7015 REG_WR(bp
, IGU_REG_RESET_MEMORIES
, 0x36);
7017 bnx2x_init_block(bp
, BLOCK_IGU
, PHASE_COMMON
);
7018 bnx2x_init_block(bp
, BLOCK_MISC_AEU
, PHASE_COMMON
);
7020 /* Reset PCIE errors for debug */
7021 REG_WR(bp
, 0x2814, 0xffffffff);
7022 REG_WR(bp
, 0x3820, 0xffffffff);
7024 if (!CHIP_IS_E1x(bp
)) {
7025 REG_WR(bp
, PCICFG_OFFSET
+ PXPCS_TL_CONTROL_5
,
7026 (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1
|
7027 PXPCS_TL_CONTROL_5_ERR_UNSPPORT
));
7028 REG_WR(bp
, PCICFG_OFFSET
+ PXPCS_TL_FUNC345_STAT
,
7029 (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4
|
7030 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3
|
7031 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2
));
7032 REG_WR(bp
, PCICFG_OFFSET
+ PXPCS_TL_FUNC678_STAT
,
7033 (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7
|
7034 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6
|
7035 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5
));
7038 bnx2x_init_block(bp
, BLOCK_NIG
, PHASE_COMMON
);
7039 if (!CHIP_IS_E1(bp
)) {
7040 /* in E3 this done in per-port section */
7041 if (!CHIP_IS_E3(bp
))
7042 REG_WR(bp
, NIG_REG_LLH_MF_MODE
, IS_MF(bp
));
7044 if (CHIP_IS_E1H(bp
))
7045 /* not applicable for E2 (and above ...) */
7046 REG_WR(bp
, NIG_REG_LLH_E1HOV_MODE
, IS_MF_SD(bp
));
7048 if (CHIP_REV_IS_SLOW(bp
))
7051 /* finish CFC init */
7052 val
= reg_poll(bp
, CFC_REG_LL_INIT_DONE
, 1, 100, 10);
7054 BNX2X_ERR("CFC LL_INIT failed\n");
7057 val
= reg_poll(bp
, CFC_REG_AC_INIT_DONE
, 1, 100, 10);
7059 BNX2X_ERR("CFC AC_INIT failed\n");
7062 val
= reg_poll(bp
, CFC_REG_CAM_INIT_DONE
, 1, 100, 10);
7064 BNX2X_ERR("CFC CAM_INIT failed\n");
7067 REG_WR(bp
, CFC_REG_DEBUG0
, 0);
7069 if (CHIP_IS_E1(bp
)) {
7070 /* read NIG statistic
7071 to see if this is our first up since powerup */
7072 bnx2x_read_dmae(bp
, NIG_REG_STAT2_BRB_OCTET
, 2);
7073 val
= *bnx2x_sp(bp
, wb_data
[0]);
7075 /* do internal memory self test */
7076 if ((val
== 0) && bnx2x_int_mem_test(bp
)) {
7077 BNX2X_ERR("internal mem self test failed\n");
7082 bnx2x_setup_fan_failure_detection(bp
);
7084 /* clear PXP2 attentions */
7085 REG_RD(bp
, PXP2_REG_PXP2_INT_STS_CLR_0
);
7087 bnx2x_enable_blocks_attention(bp
);
7088 bnx2x_enable_blocks_parity(bp
);
7090 if (!BP_NOMCP(bp
)) {
7091 if (CHIP_IS_E1x(bp
))
7092 bnx2x__common_init_phy(bp
);
7094 BNX2X_ERR("Bootcode is missing - can not initialize link\n");
7100 * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
7102 * @bp: driver handle
7104 static int bnx2x_init_hw_common_chip(struct bnx2x
*bp
)
7106 int rc
= bnx2x_init_hw_common(bp
);
7111 /* In E2 2-PORT mode, same ext phy is used for the two paths */
7113 bnx2x__common_init_phy(bp
);
7118 static int bnx2x_init_hw_port(struct bnx2x
*bp
)
7120 int port
= BP_PORT(bp
);
7121 int init_phase
= port
? PHASE_PORT1
: PHASE_PORT0
;
7125 DP(NETIF_MSG_HW
, "starting port init port %d\n", port
);
7127 REG_WR(bp
, NIG_REG_MASK_INTERRUPT_PORT0
+ port
*4, 0);
7129 bnx2x_init_block(bp
, BLOCK_MISC
, init_phase
);
7130 bnx2x_init_block(bp
, BLOCK_PXP
, init_phase
);
7131 bnx2x_init_block(bp
, BLOCK_PXP2
, init_phase
);
7133 /* Timers bug workaround: disables the pf_master bit in pglue at
7134 * common phase, we need to enable it here before any dmae access are
7135 * attempted. Therefore we manually added the enable-master to the
7136 * port phase (it also happens in the function phase)
7138 if (!CHIP_IS_E1x(bp
))
7139 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 1);
7141 bnx2x_init_block(bp
, BLOCK_ATC
, init_phase
);
7142 bnx2x_init_block(bp
, BLOCK_DMAE
, init_phase
);
7143 bnx2x_init_block(bp
, BLOCK_PGLUE_B
, init_phase
);
7144 bnx2x_init_block(bp
, BLOCK_QM
, init_phase
);
7146 bnx2x_init_block(bp
, BLOCK_TCM
, init_phase
);
7147 bnx2x_init_block(bp
, BLOCK_UCM
, init_phase
);
7148 bnx2x_init_block(bp
, BLOCK_CCM
, init_phase
);
7149 bnx2x_init_block(bp
, BLOCK_XCM
, init_phase
);
7151 /* QM cid (connection) count */
7152 bnx2x_qm_init_cid_count(bp
, bp
->qm_cid_count
, INITOP_SET
);
7154 if (CNIC_SUPPORT(bp
)) {
7155 bnx2x_init_block(bp
, BLOCK_TM
, init_phase
);
7156 REG_WR(bp
, TM_REG_LIN0_SCAN_TIME
+ port
*4, 20);
7157 REG_WR(bp
, TM_REG_LIN0_MAX_ACTIVE_CID
+ port
*4, 31);
7160 bnx2x_init_block(bp
, BLOCK_DORQ
, init_phase
);
7162 bnx2x_init_block(bp
, BLOCK_BRB1
, init_phase
);
7164 if (CHIP_IS_E1(bp
) || CHIP_IS_E1H(bp
)) {
7167 low
= ((bp
->flags
& ONE_PORT_FLAG
) ? 160 : 246);
7168 else if (bp
->dev
->mtu
> 4096) {
7169 if (bp
->flags
& ONE_PORT_FLAG
)
7173 /* (24*1024 + val*4)/256 */
7174 low
= 96 + (val
/64) +
7175 ((val
% 64) ? 1 : 0);
7178 low
= ((bp
->flags
& ONE_PORT_FLAG
) ? 80 : 160);
7179 high
= low
+ 56; /* 14*1024/256 */
7180 REG_WR(bp
, BRB1_REG_PAUSE_LOW_THRESHOLD_0
+ port
*4, low
);
7181 REG_WR(bp
, BRB1_REG_PAUSE_HIGH_THRESHOLD_0
+ port
*4, high
);
7184 if (CHIP_MODE_IS_4_PORT(bp
))
7185 REG_WR(bp
, (BP_PORT(bp
) ?
7186 BRB1_REG_MAC_GUARANTIED_1
:
7187 BRB1_REG_MAC_GUARANTIED_0
), 40);
7189 bnx2x_init_block(bp
, BLOCK_PRS
, init_phase
);
7190 if (CHIP_IS_E3B0(bp
)) {
7191 if (IS_MF_AFEX(bp
)) {
7192 /* configure headers for AFEX mode */
7193 REG_WR(bp
, BP_PORT(bp
) ?
7194 PRS_REG_HDRS_AFTER_BASIC_PORT_1
:
7195 PRS_REG_HDRS_AFTER_BASIC_PORT_0
, 0xE);
7196 REG_WR(bp
, BP_PORT(bp
) ?
7197 PRS_REG_HDRS_AFTER_TAG_0_PORT_1
:
7198 PRS_REG_HDRS_AFTER_TAG_0_PORT_0
, 0x6);
7199 REG_WR(bp
, BP_PORT(bp
) ?
7200 PRS_REG_MUST_HAVE_HDRS_PORT_1
:
7201 PRS_REG_MUST_HAVE_HDRS_PORT_0
, 0xA);
7203 /* Ovlan exists only if we are in multi-function +
7204 * switch-dependent mode, in switch-independent there
7205 * is no ovlan headers
7207 REG_WR(bp
, BP_PORT(bp
) ?
7208 PRS_REG_HDRS_AFTER_BASIC_PORT_1
:
7209 PRS_REG_HDRS_AFTER_BASIC_PORT_0
,
7210 (bp
->path_has_ovlan
? 7 : 6));
7214 bnx2x_init_block(bp
, BLOCK_TSDM
, init_phase
);
7215 bnx2x_init_block(bp
, BLOCK_CSDM
, init_phase
);
7216 bnx2x_init_block(bp
, BLOCK_USDM
, init_phase
);
7217 bnx2x_init_block(bp
, BLOCK_XSDM
, init_phase
);
7219 bnx2x_init_block(bp
, BLOCK_TSEM
, init_phase
);
7220 bnx2x_init_block(bp
, BLOCK_USEM
, init_phase
);
7221 bnx2x_init_block(bp
, BLOCK_CSEM
, init_phase
);
7222 bnx2x_init_block(bp
, BLOCK_XSEM
, init_phase
);
7224 bnx2x_init_block(bp
, BLOCK_UPB
, init_phase
);
7225 bnx2x_init_block(bp
, BLOCK_XPB
, init_phase
);
7227 bnx2x_init_block(bp
, BLOCK_PBF
, init_phase
);
7229 if (CHIP_IS_E1x(bp
)) {
7230 /* configure PBF to work without PAUSE mtu 9000 */
7231 REG_WR(bp
, PBF_REG_P0_PAUSE_ENABLE
+ port
*4, 0);
7233 /* update threshold */
7234 REG_WR(bp
, PBF_REG_P0_ARB_THRSH
+ port
*4, (9040/16));
7235 /* update init credit */
7236 REG_WR(bp
, PBF_REG_P0_INIT_CRD
+ port
*4, (9040/16) + 553 - 22);
7239 REG_WR(bp
, PBF_REG_INIT_P0
+ port
*4, 1);
7241 REG_WR(bp
, PBF_REG_INIT_P0
+ port
*4, 0);
7244 if (CNIC_SUPPORT(bp
))
7245 bnx2x_init_block(bp
, BLOCK_SRC
, init_phase
);
7247 bnx2x_init_block(bp
, BLOCK_CDU
, init_phase
);
7248 bnx2x_init_block(bp
, BLOCK_CFC
, init_phase
);
7250 if (CHIP_IS_E1(bp
)) {
7251 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, 0);
7252 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, 0);
7254 bnx2x_init_block(bp
, BLOCK_HC
, init_phase
);
7256 bnx2x_init_block(bp
, BLOCK_IGU
, init_phase
);
7258 bnx2x_init_block(bp
, BLOCK_MISC_AEU
, init_phase
);
7259 /* init aeu_mask_attn_func_0/1:
7260 * - SF mode: bits 3-7 are masked. Only bits 0-2 are in use
7261 * - MF mode: bit 3 is masked. Bits 0-2 are in use as in SF
7262 * bits 4-7 are used for "per vn group attention" */
7263 val
= IS_MF(bp
) ? 0xF7 : 0x7;
7264 /* Enable DCBX attention for all but E1 */
7265 val
|= CHIP_IS_E1(bp
) ? 0 : 0x10;
7266 REG_WR(bp
, MISC_REG_AEU_MASK_ATTN_FUNC_0
+ port
*4, val
);
7268 bnx2x_init_block(bp
, BLOCK_NIG
, init_phase
);
7270 if (!CHIP_IS_E1x(bp
)) {
7271 /* Bit-map indicating which L2 hdrs may appear after the
7272 * basic Ethernet header
7275 REG_WR(bp
, BP_PORT(bp
) ?
7276 NIG_REG_P1_HDRS_AFTER_BASIC
:
7277 NIG_REG_P0_HDRS_AFTER_BASIC
, 0xE);
7279 REG_WR(bp
, BP_PORT(bp
) ?
7280 NIG_REG_P1_HDRS_AFTER_BASIC
:
7281 NIG_REG_P0_HDRS_AFTER_BASIC
,
7282 IS_MF_SD(bp
) ? 7 : 6);
7285 REG_WR(bp
, BP_PORT(bp
) ?
7286 NIG_REG_LLH1_MF_MODE
:
7287 NIG_REG_LLH_MF_MODE
, IS_MF(bp
));
7289 if (!CHIP_IS_E3(bp
))
7290 REG_WR(bp
, NIG_REG_XGXS_SERDES0_MODE_SEL
+ port
*4, 1);
7292 if (!CHIP_IS_E1(bp
)) {
7293 /* 0x2 disable mf_ov, 0x1 enable */
7294 REG_WR(bp
, NIG_REG_LLH0_BRB1_DRV_MASK_MF
+ port
*4,
7295 (IS_MF_SD(bp
) ? 0x1 : 0x2));
7297 if (!CHIP_IS_E1x(bp
)) {
7299 switch (bp
->mf_mode
) {
7300 case MULTI_FUNCTION_SD
:
7303 case MULTI_FUNCTION_SI
:
7304 case MULTI_FUNCTION_AFEX
:
7309 REG_WR(bp
, (BP_PORT(bp
) ? NIG_REG_LLH1_CLS_TYPE
:
7310 NIG_REG_LLH0_CLS_TYPE
), val
);
7313 REG_WR(bp
, NIG_REG_LLFC_ENABLE_0
+ port
*4, 0);
7314 REG_WR(bp
, NIG_REG_LLFC_OUT_EN_0
+ port
*4, 0);
7315 REG_WR(bp
, NIG_REG_PAUSE_ENABLE_0
+ port
*4, 1);
7319 /* If SPIO5 is set to generate interrupts, enable it for this port */
7320 val
= REG_RD(bp
, MISC_REG_SPIO_EVENT_EN
);
7321 if (val
& MISC_SPIO_SPIO5
) {
7322 u32 reg_addr
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0
:
7323 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0
);
7324 val
= REG_RD(bp
, reg_addr
);
7325 val
|= AEU_INPUTS_ATTN_BITS_SPIO5
;
7326 REG_WR(bp
, reg_addr
, val
);
7332 static void bnx2x_ilt_wr(struct bnx2x
*bp
, u32 index
, dma_addr_t addr
)
7338 reg
= PXP2_REG_RQ_ONCHIP_AT
+ index
*8;
7340 reg
= PXP2_REG_RQ_ONCHIP_AT_B0
+ index
*8;
7342 wb_write
[0] = ONCHIP_ADDR1(addr
);
7343 wb_write
[1] = ONCHIP_ADDR2(addr
);
7344 REG_WR_DMAE(bp
, reg
, wb_write
, 2);
7347 void bnx2x_igu_clear_sb_gen(struct bnx2x
*bp
, u8 func
, u8 idu_sb_id
, bool is_pf
)
7349 u32 data
, ctl
, cnt
= 100;
7350 u32 igu_addr_data
= IGU_REG_COMMAND_REG_32LSB_DATA
;
7351 u32 igu_addr_ctl
= IGU_REG_COMMAND_REG_CTRL
;
7352 u32 igu_addr_ack
= IGU_REG_CSTORM_TYPE_0_SB_CLEANUP
+ (idu_sb_id
/32)*4;
7353 u32 sb_bit
= 1 << (idu_sb_id
%32);
7354 u32 func_encode
= func
| (is_pf
? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT
;
7355 u32 addr_encode
= IGU_CMD_E2_PROD_UPD_BASE
+ idu_sb_id
;
7357 /* Not supported in BC mode */
7358 if (CHIP_INT_MODE_IS_BC(bp
))
7361 data
= (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup
7362 << IGU_REGULAR_CLEANUP_TYPE_SHIFT
) |
7363 IGU_REGULAR_CLEANUP_SET
|
7364 IGU_REGULAR_BCLEANUP
;
7366 ctl
= addr_encode
<< IGU_CTRL_REG_ADDRESS_SHIFT
|
7367 func_encode
<< IGU_CTRL_REG_FID_SHIFT
|
7368 IGU_CTRL_CMD_TYPE_WR
<< IGU_CTRL_REG_TYPE_SHIFT
;
7370 DP(NETIF_MSG_HW
, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
7371 data
, igu_addr_data
);
7372 REG_WR(bp
, igu_addr_data
, data
);
7375 DP(NETIF_MSG_HW
, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
7377 REG_WR(bp
, igu_addr_ctl
, ctl
);
7381 /* wait for clean up to finish */
7382 while (!(REG_RD(bp
, igu_addr_ack
) & sb_bit
) && --cnt
)
7385 if (!(REG_RD(bp
, igu_addr_ack
) & sb_bit
)) {
7387 "Unable to finish IGU cleanup: idu_sb_id %d offset %d bit %d (cnt %d)\n",
7388 idu_sb_id
, idu_sb_id
/32, idu_sb_id
%32, cnt
);
7392 static void bnx2x_igu_clear_sb(struct bnx2x
*bp
, u8 idu_sb_id
)
7394 bnx2x_igu_clear_sb_gen(bp
, BP_FUNC(bp
), idu_sb_id
, true /*PF*/);
7397 static void bnx2x_clear_func_ilt(struct bnx2x
*bp
, u32 func
)
7399 u32 i
, base
= FUNC_ILT_BASE(func
);
7400 for (i
= base
; i
< base
+ ILT_PER_FUNC
; i
++)
7401 bnx2x_ilt_wr(bp
, i
, 0);
7404 static void bnx2x_init_searcher(struct bnx2x
*bp
)
7406 int port
= BP_PORT(bp
);
7407 bnx2x_src_init_t2(bp
, bp
->t2
, bp
->t2_mapping
, SRC_CONN_NUM
);
7408 /* T1 hash bits value determines the T1 number of entries */
7409 REG_WR(bp
, SRC_REG_NUMBER_HASH_BITS0
+ port
*4, SRC_HASH_BITS
);
7412 static inline int bnx2x_func_switch_update(struct bnx2x
*bp
, int suspend
)
7415 struct bnx2x_func_state_params func_params
= {NULL
};
7416 struct bnx2x_func_switch_update_params
*switch_update_params
=
7417 &func_params
.params
.switch_update
;
7419 /* Prepare parameters for function state transitions */
7420 __set_bit(RAMROD_COMP_WAIT
, &func_params
.ramrod_flags
);
7421 __set_bit(RAMROD_RETRY
, &func_params
.ramrod_flags
);
7423 func_params
.f_obj
= &bp
->func_obj
;
7424 func_params
.cmd
= BNX2X_F_CMD_SWITCH_UPDATE
;
7426 /* Function parameters */
7427 switch_update_params
->suspend
= suspend
;
7429 rc
= bnx2x_func_state_change(bp
, &func_params
);
7434 static int bnx2x_reset_nic_mode(struct bnx2x
*bp
)
7436 int rc
, i
, port
= BP_PORT(bp
);
7437 int vlan_en
= 0, mac_en
[NUM_MACS
];
7439 /* Close input from network */
7440 if (bp
->mf_mode
== SINGLE_FUNCTION
) {
7441 bnx2x_set_rx_filter(&bp
->link_params
, 0);
7443 vlan_en
= REG_RD(bp
, port
? NIG_REG_LLH1_FUNC_EN
:
7444 NIG_REG_LLH0_FUNC_EN
);
7445 REG_WR(bp
, port
? NIG_REG_LLH1_FUNC_EN
:
7446 NIG_REG_LLH0_FUNC_EN
, 0);
7447 for (i
= 0; i
< NUM_MACS
; i
++) {
7448 mac_en
[i
] = REG_RD(bp
, port
?
7449 (NIG_REG_LLH1_FUNC_MEM_ENABLE
+
7451 (NIG_REG_LLH0_FUNC_MEM_ENABLE
+
7453 REG_WR(bp
, port
? (NIG_REG_LLH1_FUNC_MEM_ENABLE
+
7455 (NIG_REG_LLH0_FUNC_MEM_ENABLE
+ 4 * i
), 0);
7459 /* Close BMC to host */
7460 REG_WR(bp
, port
? NIG_REG_P0_TX_MNG_HOST_ENABLE
:
7461 NIG_REG_P1_TX_MNG_HOST_ENABLE
, 0);
7463 /* Suspend Tx switching to the PF. Completion of this ramrod
7464 * further guarantees that all the packets of that PF / child
7465 * VFs in BRB were processed by the Parser, so it is safe to
7466 * change the NIC_MODE register.
7468 rc
= bnx2x_func_switch_update(bp
, 1);
7470 BNX2X_ERR("Can't suspend tx-switching!\n");
7474 /* Change NIC_MODE register */
7475 REG_WR(bp
, PRS_REG_NIC_MODE
, 0);
7477 /* Open input from network */
7478 if (bp
->mf_mode
== SINGLE_FUNCTION
) {
7479 bnx2x_set_rx_filter(&bp
->link_params
, 1);
7481 REG_WR(bp
, port
? NIG_REG_LLH1_FUNC_EN
:
7482 NIG_REG_LLH0_FUNC_EN
, vlan_en
);
7483 for (i
= 0; i
< NUM_MACS
; i
++) {
7484 REG_WR(bp
, port
? (NIG_REG_LLH1_FUNC_MEM_ENABLE
+
7486 (NIG_REG_LLH0_FUNC_MEM_ENABLE
+ 4 * i
),
7491 /* Enable BMC to host */
7492 REG_WR(bp
, port
? NIG_REG_P0_TX_MNG_HOST_ENABLE
:
7493 NIG_REG_P1_TX_MNG_HOST_ENABLE
, 1);
7495 /* Resume Tx switching to the PF */
7496 rc
= bnx2x_func_switch_update(bp
, 0);
7498 BNX2X_ERR("Can't resume tx-switching!\n");
7502 DP(NETIF_MSG_IFUP
, "NIC MODE disabled\n");
7506 int bnx2x_init_hw_func_cnic(struct bnx2x
*bp
)
7510 bnx2x_ilt_init_op_cnic(bp
, INITOP_SET
);
7512 if (CONFIGURE_NIC_MODE(bp
)) {
7513 /* Configure searcher as part of function hw init */
7514 bnx2x_init_searcher(bp
);
7516 /* Reset NIC mode */
7517 rc
= bnx2x_reset_nic_mode(bp
);
7519 BNX2X_ERR("Can't change NIC mode!\n");
7526 static int bnx2x_init_hw_func(struct bnx2x
*bp
)
7528 int port
= BP_PORT(bp
);
7529 int func
= BP_FUNC(bp
);
7530 int init_phase
= PHASE_PF0
+ func
;
7531 struct bnx2x_ilt
*ilt
= BP_ILT(bp
);
7534 u32 main_mem_base
, main_mem_size
, main_mem_prty_clr
;
7535 int i
, main_mem_width
, rc
;
7537 DP(NETIF_MSG_HW
, "starting func init func %d\n", func
);
7539 /* FLR cleanup - hmmm */
7540 if (!CHIP_IS_E1x(bp
)) {
7541 rc
= bnx2x_pf_flr_clnup(bp
);
7548 /* set MSI reconfigure capability */
7549 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
7550 addr
= (port
? HC_REG_CONFIG_1
: HC_REG_CONFIG_0
);
7551 val
= REG_RD(bp
, addr
);
7552 val
|= HC_CONFIG_0_REG_MSI_ATTN_EN_0
;
7553 REG_WR(bp
, addr
, val
);
7556 bnx2x_init_block(bp
, BLOCK_PXP
, init_phase
);
7557 bnx2x_init_block(bp
, BLOCK_PXP2
, init_phase
);
7560 cdu_ilt_start
= ilt
->clients
[ILT_CLIENT_CDU
].start
;
7563 cdu_ilt_start
+= BNX2X_FIRST_VF_CID
/ILT_PAGE_CIDS
;
7564 cdu_ilt_start
= bnx2x_iov_init_ilt(bp
, cdu_ilt_start
);
7566 /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes
7567 * those of the VFs, so start line should be reset
7569 cdu_ilt_start
= ilt
->clients
[ILT_CLIENT_CDU
].start
;
7570 for (i
= 0; i
< L2_ILT_LINES(bp
); i
++) {
7571 ilt
->lines
[cdu_ilt_start
+ i
].page
= bp
->context
[i
].vcxt
;
7572 ilt
->lines
[cdu_ilt_start
+ i
].page_mapping
=
7573 bp
->context
[i
].cxt_mapping
;
7574 ilt
->lines
[cdu_ilt_start
+ i
].size
= bp
->context
[i
].size
;
7577 bnx2x_ilt_init_op(bp
, INITOP_SET
);
7579 if (!CONFIGURE_NIC_MODE(bp
)) {
7580 bnx2x_init_searcher(bp
);
7581 REG_WR(bp
, PRS_REG_NIC_MODE
, 0);
7582 DP(NETIF_MSG_IFUP
, "NIC MODE disabled\n");
7585 REG_WR(bp
, PRS_REG_NIC_MODE
, 1);
7586 DP(NETIF_MSG_IFUP
, "NIC MODE configured\n");
7589 if (!CHIP_IS_E1x(bp
)) {
7590 u32 pf_conf
= IGU_PF_CONF_FUNC_EN
;
7592 /* Turn on a single ISR mode in IGU if driver is going to use
7595 if (!(bp
->flags
& USING_MSIX_FLAG
))
7596 pf_conf
|= IGU_PF_CONF_SINGLE_ISR_EN
;
7598 * Timers workaround bug: function init part.
7599 * Need to wait 20msec after initializing ILT,
7600 * needed to make sure there are no requests in
7601 * one of the PXP internal queues with "old" ILT addresses
7605 * Master enable - Due to WB DMAE writes performed before this
7606 * register is re-initialized as part of the regular function
7609 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 1);
7610 /* Enable the function in IGU */
7611 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, pf_conf
);
7616 bnx2x_init_block(bp
, BLOCK_PGLUE_B
, init_phase
);
7618 if (!CHIP_IS_E1x(bp
))
7619 REG_WR(bp
, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR
, func
);
7621 bnx2x_init_block(bp
, BLOCK_ATC
, init_phase
);
7622 bnx2x_init_block(bp
, BLOCK_DMAE
, init_phase
);
7623 bnx2x_init_block(bp
, BLOCK_NIG
, init_phase
);
7624 bnx2x_init_block(bp
, BLOCK_SRC
, init_phase
);
7625 bnx2x_init_block(bp
, BLOCK_MISC
, init_phase
);
7626 bnx2x_init_block(bp
, BLOCK_TCM
, init_phase
);
7627 bnx2x_init_block(bp
, BLOCK_UCM
, init_phase
);
7628 bnx2x_init_block(bp
, BLOCK_CCM
, init_phase
);
7629 bnx2x_init_block(bp
, BLOCK_XCM
, init_phase
);
7630 bnx2x_init_block(bp
, BLOCK_TSEM
, init_phase
);
7631 bnx2x_init_block(bp
, BLOCK_USEM
, init_phase
);
7632 bnx2x_init_block(bp
, BLOCK_CSEM
, init_phase
);
7633 bnx2x_init_block(bp
, BLOCK_XSEM
, init_phase
);
7635 if (!CHIP_IS_E1x(bp
))
7636 REG_WR(bp
, QM_REG_PF_EN
, 1);
7638 if (!CHIP_IS_E1x(bp
)) {
7639 REG_WR(bp
, TSEM_REG_VFPF_ERR_NUM
, BNX2X_MAX_NUM_OF_VFS
+ func
);
7640 REG_WR(bp
, USEM_REG_VFPF_ERR_NUM
, BNX2X_MAX_NUM_OF_VFS
+ func
);
7641 REG_WR(bp
, CSEM_REG_VFPF_ERR_NUM
, BNX2X_MAX_NUM_OF_VFS
+ func
);
7642 REG_WR(bp
, XSEM_REG_VFPF_ERR_NUM
, BNX2X_MAX_NUM_OF_VFS
+ func
);
7644 bnx2x_init_block(bp
, BLOCK_QM
, init_phase
);
7646 bnx2x_init_block(bp
, BLOCK_TM
, init_phase
);
7647 bnx2x_init_block(bp
, BLOCK_DORQ
, init_phase
);
7649 bnx2x_iov_init_dq(bp
);
7651 bnx2x_init_block(bp
, BLOCK_BRB1
, init_phase
);
7652 bnx2x_init_block(bp
, BLOCK_PRS
, init_phase
);
7653 bnx2x_init_block(bp
, BLOCK_TSDM
, init_phase
);
7654 bnx2x_init_block(bp
, BLOCK_CSDM
, init_phase
);
7655 bnx2x_init_block(bp
, BLOCK_USDM
, init_phase
);
7656 bnx2x_init_block(bp
, BLOCK_XSDM
, init_phase
);
7657 bnx2x_init_block(bp
, BLOCK_UPB
, init_phase
);
7658 bnx2x_init_block(bp
, BLOCK_XPB
, init_phase
);
7659 bnx2x_init_block(bp
, BLOCK_PBF
, init_phase
);
7660 if (!CHIP_IS_E1x(bp
))
7661 REG_WR(bp
, PBF_REG_DISABLE_PF
, 0);
7663 bnx2x_init_block(bp
, BLOCK_CDU
, init_phase
);
7665 bnx2x_init_block(bp
, BLOCK_CFC
, init_phase
);
7667 if (!CHIP_IS_E1x(bp
))
7668 REG_WR(bp
, CFC_REG_WEAK_ENABLE_PF
, 1);
7671 REG_WR(bp
, NIG_REG_LLH0_FUNC_EN
+ port
*8, 1);
7672 REG_WR(bp
, NIG_REG_LLH0_FUNC_VLAN_ID
+ port
*8, bp
->mf_ov
);
7675 bnx2x_init_block(bp
, BLOCK_MISC_AEU
, init_phase
);
7677 /* HC init per function */
7678 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
7679 if (CHIP_IS_E1H(bp
)) {
7680 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_12
+ func
*4, 0);
7682 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, 0);
7683 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, 0);
7685 bnx2x_init_block(bp
, BLOCK_HC
, init_phase
);
7688 int num_segs
, sb_idx
, prod_offset
;
7690 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_12
+ func
*4, 0);
7692 if (!CHIP_IS_E1x(bp
)) {
7693 REG_WR(bp
, IGU_REG_LEADING_EDGE_LATCH
, 0);
7694 REG_WR(bp
, IGU_REG_TRAILING_EDGE_LATCH
, 0);
7697 bnx2x_init_block(bp
, BLOCK_IGU
, init_phase
);
7699 if (!CHIP_IS_E1x(bp
)) {
7703 * E2 mode: address 0-135 match to the mapping memory;
7704 * 136 - PF0 default prod; 137 - PF1 default prod;
7705 * 138 - PF2 default prod; 139 - PF3 default prod;
7706 * 140 - PF0 attn prod; 141 - PF1 attn prod;
7707 * 142 - PF2 attn prod; 143 - PF3 attn prod;
7710 * E1.5 mode - In backward compatible mode;
7711 * for non default SB; each even line in the memory
7712 * holds the U producer and each odd line hold
7713 * the C producer. The first 128 producers are for
7714 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
7715 * producers are for the DSB for each PF.
7716 * Each PF has five segments: (the order inside each
7717 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
7718 * 132-135 C prods; 136-139 X prods; 140-143 T prods;
7719 * 144-147 attn prods;
7721 /* non-default-status-blocks */
7722 num_segs
= CHIP_INT_MODE_IS_BC(bp
) ?
7723 IGU_BC_NDSB_NUM_SEGS
: IGU_NORM_NDSB_NUM_SEGS
;
7724 for (sb_idx
= 0; sb_idx
< bp
->igu_sb_cnt
; sb_idx
++) {
7725 prod_offset
= (bp
->igu_base_sb
+ sb_idx
) *
7728 for (i
= 0; i
< num_segs
; i
++) {
7729 addr
= IGU_REG_PROD_CONS_MEMORY
+
7730 (prod_offset
+ i
) * 4;
7731 REG_WR(bp
, addr
, 0);
7733 /* send consumer update with value 0 */
7734 bnx2x_ack_sb(bp
, bp
->igu_base_sb
+ sb_idx
,
7735 USTORM_ID
, 0, IGU_INT_NOP
, 1);
7736 bnx2x_igu_clear_sb(bp
,
7737 bp
->igu_base_sb
+ sb_idx
);
7740 /* default-status-blocks */
7741 num_segs
= CHIP_INT_MODE_IS_BC(bp
) ?
7742 IGU_BC_DSB_NUM_SEGS
: IGU_NORM_DSB_NUM_SEGS
;
7744 if (CHIP_MODE_IS_4_PORT(bp
))
7745 dsb_idx
= BP_FUNC(bp
);
7747 dsb_idx
= BP_VN(bp
);
7749 prod_offset
= (CHIP_INT_MODE_IS_BC(bp
) ?
7750 IGU_BC_BASE_DSB_PROD
+ dsb_idx
:
7751 IGU_NORM_BASE_DSB_PROD
+ dsb_idx
);
7754 * igu prods come in chunks of E1HVN_MAX (4) -
7755 * does not matters what is the current chip mode
7757 for (i
= 0; i
< (num_segs
* E1HVN_MAX
);
7759 addr
= IGU_REG_PROD_CONS_MEMORY
+
7760 (prod_offset
+ i
)*4;
7761 REG_WR(bp
, addr
, 0);
7763 /* send consumer update with 0 */
7764 if (CHIP_INT_MODE_IS_BC(bp
)) {
7765 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7766 USTORM_ID
, 0, IGU_INT_NOP
, 1);
7767 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7768 CSTORM_ID
, 0, IGU_INT_NOP
, 1);
7769 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7770 XSTORM_ID
, 0, IGU_INT_NOP
, 1);
7771 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7772 TSTORM_ID
, 0, IGU_INT_NOP
, 1);
7773 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7774 ATTENTION_ID
, 0, IGU_INT_NOP
, 1);
7776 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7777 USTORM_ID
, 0, IGU_INT_NOP
, 1);
7778 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7779 ATTENTION_ID
, 0, IGU_INT_NOP
, 1);
7781 bnx2x_igu_clear_sb(bp
, bp
->igu_dsb_id
);
7783 /* !!! These should become driver const once
7784 rf-tool supports split-68 const */
7785 REG_WR(bp
, IGU_REG_SB_INT_BEFORE_MASK_LSB
, 0);
7786 REG_WR(bp
, IGU_REG_SB_INT_BEFORE_MASK_MSB
, 0);
7787 REG_WR(bp
, IGU_REG_SB_MASK_LSB
, 0);
7788 REG_WR(bp
, IGU_REG_SB_MASK_MSB
, 0);
7789 REG_WR(bp
, IGU_REG_PBA_STATUS_LSB
, 0);
7790 REG_WR(bp
, IGU_REG_PBA_STATUS_MSB
, 0);
7794 /* Reset PCIE errors for debug */
7795 REG_WR(bp
, 0x2114, 0xffffffff);
7796 REG_WR(bp
, 0x2120, 0xffffffff);
7798 if (CHIP_IS_E1x(bp
)) {
7799 main_mem_size
= HC_REG_MAIN_MEMORY_SIZE
/ 2; /*dwords*/
7800 main_mem_base
= HC_REG_MAIN_MEMORY
+
7801 BP_PORT(bp
) * (main_mem_size
* 4);
7802 main_mem_prty_clr
= HC_REG_HC_PRTY_STS_CLR
;
7805 val
= REG_RD(bp
, main_mem_prty_clr
);
7808 "Hmmm... Parity errors in HC block during function init (0x%x)!\n",
7811 /* Clear "false" parity errors in MSI-X table */
7812 for (i
= main_mem_base
;
7813 i
< main_mem_base
+ main_mem_size
* 4;
7814 i
+= main_mem_width
) {
7815 bnx2x_read_dmae(bp
, i
, main_mem_width
/ 4);
7816 bnx2x_write_dmae(bp
, bnx2x_sp_mapping(bp
, wb_data
),
7817 i
, main_mem_width
/ 4);
7819 /* Clear HC parity attention */
7820 REG_RD(bp
, main_mem_prty_clr
);
7823 #ifdef BNX2X_STOP_ON_ERROR
7824 /* Enable STORMs SP logging */
7825 REG_WR8(bp
, BAR_USTRORM_INTMEM
+
7826 USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp
)), 1);
7827 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+
7828 TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp
)), 1);
7829 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+
7830 CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp
)), 1);
7831 REG_WR8(bp
, BAR_XSTRORM_INTMEM
+
7832 XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp
)), 1);
7835 bnx2x_phy_probe(&bp
->link_params
);
7840 void bnx2x_free_mem_cnic(struct bnx2x
*bp
)
7842 bnx2x_ilt_mem_op_cnic(bp
, ILT_MEMOP_FREE
);
7844 if (!CHIP_IS_E1x(bp
))
7845 BNX2X_PCI_FREE(bp
->cnic_sb
.e2_sb
, bp
->cnic_sb_mapping
,
7846 sizeof(struct host_hc_status_block_e2
));
7848 BNX2X_PCI_FREE(bp
->cnic_sb
.e1x_sb
, bp
->cnic_sb_mapping
,
7849 sizeof(struct host_hc_status_block_e1x
));
7851 BNX2X_PCI_FREE(bp
->t2
, bp
->t2_mapping
, SRC_T2_SZ
);
7854 void bnx2x_free_mem(struct bnx2x
*bp
)
7858 BNX2X_PCI_FREE(bp
->def_status_blk
, bp
->def_status_blk_mapping
,
7859 sizeof(struct host_sp_status_block
));
7861 BNX2X_PCI_FREE(bp
->fw_stats
, bp
->fw_stats_mapping
,
7862 bp
->fw_stats_data_sz
+ bp
->fw_stats_req_sz
);
7864 BNX2X_PCI_FREE(bp
->slowpath
, bp
->slowpath_mapping
,
7865 sizeof(struct bnx2x_slowpath
));
7867 for (i
= 0; i
< L2_ILT_LINES(bp
); i
++)
7868 BNX2X_PCI_FREE(bp
->context
[i
].vcxt
, bp
->context
[i
].cxt_mapping
,
7869 bp
->context
[i
].size
);
7870 bnx2x_ilt_mem_op(bp
, ILT_MEMOP_FREE
);
7872 BNX2X_FREE(bp
->ilt
->lines
);
7874 BNX2X_PCI_FREE(bp
->spq
, bp
->spq_mapping
, BCM_PAGE_SIZE
);
7876 BNX2X_PCI_FREE(bp
->eq_ring
, bp
->eq_mapping
,
7877 BCM_PAGE_SIZE
* NUM_EQ_PAGES
);
7879 BNX2X_PCI_FREE(bp
->t2
, bp
->t2_mapping
, SRC_T2_SZ
);
7881 bnx2x_iov_free_mem(bp
);
7884 int bnx2x_alloc_mem_cnic(struct bnx2x
*bp
)
7886 if (!CHIP_IS_E1x(bp
))
7887 /* size = the status block + ramrod buffers */
7888 BNX2X_PCI_ALLOC(bp
->cnic_sb
.e2_sb
, &bp
->cnic_sb_mapping
,
7889 sizeof(struct host_hc_status_block_e2
));
7891 BNX2X_PCI_ALLOC(bp
->cnic_sb
.e1x_sb
,
7892 &bp
->cnic_sb_mapping
,
7894 host_hc_status_block_e1x
));
7896 if (CONFIGURE_NIC_MODE(bp
) && !bp
->t2
)
7897 /* allocate searcher T2 table, as it wasn't allocated before */
7898 BNX2X_PCI_ALLOC(bp
->t2
, &bp
->t2_mapping
, SRC_T2_SZ
);
7900 /* write address to which L5 should insert its values */
7901 bp
->cnic_eth_dev
.addr_drv_info_to_mcp
=
7902 &bp
->slowpath
->drv_info_to_mcp
;
7904 if (bnx2x_ilt_mem_op_cnic(bp
, ILT_MEMOP_ALLOC
))
7910 bnx2x_free_mem_cnic(bp
);
7911 BNX2X_ERR("Can't allocate memory\n");
7915 int bnx2x_alloc_mem(struct bnx2x
*bp
)
7917 int i
, allocated
, context_size
;
7919 if (!CONFIGURE_NIC_MODE(bp
) && !bp
->t2
)
7920 /* allocate searcher T2 table */
7921 BNX2X_PCI_ALLOC(bp
->t2
, &bp
->t2_mapping
, SRC_T2_SZ
);
7923 BNX2X_PCI_ALLOC(bp
->def_status_blk
, &bp
->def_status_blk_mapping
,
7924 sizeof(struct host_sp_status_block
));
7926 BNX2X_PCI_ALLOC(bp
->slowpath
, &bp
->slowpath_mapping
,
7927 sizeof(struct bnx2x_slowpath
));
7929 /* Allocate memory for CDU context:
7930 * This memory is allocated separately and not in the generic ILT
7931 * functions because CDU differs in few aspects:
7932 * 1. There are multiple entities allocating memory for context -
7933 * 'regular' driver, CNIC and SRIOV driver. Each separately controls
7934 * its own ILT lines.
7935 * 2. Since CDU page-size is not a single 4KB page (which is the case
7936 * for the other ILT clients), to be efficient we want to support
7937 * allocation of sub-page-size in the last entry.
7938 * 3. Context pointers are used by the driver to pass to FW / update
7939 * the context (for the other ILT clients the pointers are used just to
7940 * free the memory during unload).
7942 context_size
= sizeof(union cdu_context
) * BNX2X_L2_CID_COUNT(bp
);
7944 for (i
= 0, allocated
= 0; allocated
< context_size
; i
++) {
7945 bp
->context
[i
].size
= min(CDU_ILT_PAGE_SZ
,
7946 (context_size
- allocated
));
7947 BNX2X_PCI_ALLOC(bp
->context
[i
].vcxt
,
7948 &bp
->context
[i
].cxt_mapping
,
7949 bp
->context
[i
].size
);
7950 allocated
+= bp
->context
[i
].size
;
7952 BNX2X_ALLOC(bp
->ilt
->lines
, sizeof(struct ilt_line
) * ILT_MAX_LINES
);
7954 if (bnx2x_ilt_mem_op(bp
, ILT_MEMOP_ALLOC
))
7957 if (bnx2x_iov_alloc_mem(bp
))
7960 /* Slow path ring */
7961 BNX2X_PCI_ALLOC(bp
->spq
, &bp
->spq_mapping
, BCM_PAGE_SIZE
);
7964 BNX2X_PCI_ALLOC(bp
->eq_ring
, &bp
->eq_mapping
,
7965 BCM_PAGE_SIZE
* NUM_EQ_PAGES
);
7971 BNX2X_ERR("Can't allocate memory\n");
7976 * Init service functions
7979 int bnx2x_set_mac_one(struct bnx2x
*bp
, u8
*mac
,
7980 struct bnx2x_vlan_mac_obj
*obj
, bool set
,
7981 int mac_type
, unsigned long *ramrod_flags
)
7984 struct bnx2x_vlan_mac_ramrod_params ramrod_param
;
7986 memset(&ramrod_param
, 0, sizeof(ramrod_param
));
7988 /* Fill general parameters */
7989 ramrod_param
.vlan_mac_obj
= obj
;
7990 ramrod_param
.ramrod_flags
= *ramrod_flags
;
7992 /* Fill a user request section if needed */
7993 if (!test_bit(RAMROD_CONT
, ramrod_flags
)) {
7994 memcpy(ramrod_param
.user_req
.u
.mac
.mac
, mac
, ETH_ALEN
);
7996 __set_bit(mac_type
, &ramrod_param
.user_req
.vlan_mac_flags
);
7998 /* Set the command: ADD or DEL */
8000 ramrod_param
.user_req
.cmd
= BNX2X_VLAN_MAC_ADD
;
8002 ramrod_param
.user_req
.cmd
= BNX2X_VLAN_MAC_DEL
;
8005 rc
= bnx2x_config_vlan_mac(bp
, &ramrod_param
);
8007 if (rc
== -EEXIST
) {
8008 DP(BNX2X_MSG_SP
, "Failed to schedule ADD operations: %d\n", rc
);
8009 /* do not treat adding same MAC as error */
8012 BNX2X_ERR("%s MAC failed\n", (set
? "Set" : "Del"));
8017 int bnx2x_del_all_macs(struct bnx2x
*bp
,
8018 struct bnx2x_vlan_mac_obj
*mac_obj
,
8019 int mac_type
, bool wait_for_comp
)
8022 unsigned long ramrod_flags
= 0, vlan_mac_flags
= 0;
8024 /* Wait for completion of requested */
8026 __set_bit(RAMROD_COMP_WAIT
, &ramrod_flags
);
8028 /* Set the mac type of addresses we want to clear */
8029 __set_bit(mac_type
, &vlan_mac_flags
);
8031 rc
= mac_obj
->delete_all(bp
, mac_obj
, &vlan_mac_flags
, &ramrod_flags
);
8033 BNX2X_ERR("Failed to delete MACs: %d\n", rc
);
8038 int bnx2x_set_eth_mac(struct bnx2x
*bp
, bool set
)
8040 if (is_zero_ether_addr(bp
->dev
->dev_addr
) &&
8041 (IS_MF_STORAGE_SD(bp
) || IS_MF_FCOE_AFEX(bp
))) {
8042 DP(NETIF_MSG_IFUP
| NETIF_MSG_IFDOWN
,
8043 "Ignoring Zero MAC for STORAGE SD mode\n");
8048 unsigned long ramrod_flags
= 0;
8050 DP(NETIF_MSG_IFUP
, "Adding Eth MAC\n");
8051 __set_bit(RAMROD_COMP_WAIT
, &ramrod_flags
);
8052 return bnx2x_set_mac_one(bp
, bp
->dev
->dev_addr
,
8053 &bp
->sp_objs
->mac_obj
, set
,
8054 BNX2X_ETH_MAC
, &ramrod_flags
);
8056 return bnx2x_vfpf_config_mac(bp
, bp
->dev
->dev_addr
,
8057 bp
->fp
->index
, true);
8061 int bnx2x_setup_leading(struct bnx2x
*bp
)
8063 return bnx2x_setup_queue(bp
, &bp
->fp
[0], 1);
8067 * bnx2x_set_int_mode - configure interrupt mode
8069 * @bp: driver handle
8071 * In case of MSI-X it will also try to enable MSI-X.
8073 int bnx2x_set_int_mode(struct bnx2x
*bp
)
8077 if (IS_VF(bp
) && int_mode
!= BNX2X_INT_MODE_MSIX
)
8081 case BNX2X_INT_MODE_MSIX
:
8082 /* attempt to enable msix */
8083 rc
= bnx2x_enable_msix(bp
);
8089 /* vfs use only msix */
8090 if (rc
&& IS_VF(bp
))
8093 /* failed to enable multiple MSI-X */
8094 BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n",
8096 1 + bp
->num_cnic_queues
);
8098 /* falling through... */
8099 case BNX2X_INT_MODE_MSI
:
8100 bnx2x_enable_msi(bp
);
8102 /* falling through... */
8103 case BNX2X_INT_MODE_INTX
:
8104 bp
->num_ethernet_queues
= 1;
8105 bp
->num_queues
= bp
->num_ethernet_queues
+ bp
->num_cnic_queues
;
8106 BNX2X_DEV_INFO("set number of queues to 1\n");
8109 BNX2X_DEV_INFO("unknown value in int_mode module parameter\n");
8115 /* must be called prior to any HW initializations */
8116 static inline u16
bnx2x_cid_ilt_lines(struct bnx2x
*bp
)
8119 return (BNX2X_FIRST_VF_CID
+ BNX2X_VF_CIDS
)/ILT_PAGE_CIDS
;
8120 return L2_ILT_LINES(bp
);
8123 void bnx2x_ilt_set_info(struct bnx2x
*bp
)
8125 struct ilt_client_info
*ilt_client
;
8126 struct bnx2x_ilt
*ilt
= BP_ILT(bp
);
8129 ilt
->start_line
= FUNC_ILT_BASE(BP_FUNC(bp
));
8130 DP(BNX2X_MSG_SP
, "ilt starts at line %d\n", ilt
->start_line
);
8133 ilt_client
= &ilt
->clients
[ILT_CLIENT_CDU
];
8134 ilt_client
->client_num
= ILT_CLIENT_CDU
;
8135 ilt_client
->page_size
= CDU_ILT_PAGE_SZ
;
8136 ilt_client
->flags
= ILT_CLIENT_SKIP_MEM
;
8137 ilt_client
->start
= line
;
8138 line
+= bnx2x_cid_ilt_lines(bp
);
8140 if (CNIC_SUPPORT(bp
))
8141 line
+= CNIC_ILT_LINES
;
8142 ilt_client
->end
= line
- 1;
8144 DP(NETIF_MSG_IFUP
, "ilt client[CDU]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8147 ilt_client
->page_size
,
8149 ilog2(ilt_client
->page_size
>> 12));
8152 if (QM_INIT(bp
->qm_cid_count
)) {
8153 ilt_client
= &ilt
->clients
[ILT_CLIENT_QM
];
8154 ilt_client
->client_num
= ILT_CLIENT_QM
;
8155 ilt_client
->page_size
= QM_ILT_PAGE_SZ
;
8156 ilt_client
->flags
= 0;
8157 ilt_client
->start
= line
;
8159 /* 4 bytes for each cid */
8160 line
+= DIV_ROUND_UP(bp
->qm_cid_count
* QM_QUEUES_PER_FUNC
* 4,
8163 ilt_client
->end
= line
- 1;
8166 "ilt client[QM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8169 ilt_client
->page_size
,
8171 ilog2(ilt_client
->page_size
>> 12));
8174 if (CNIC_SUPPORT(bp
)) {
8176 ilt_client
= &ilt
->clients
[ILT_CLIENT_SRC
];
8177 ilt_client
->client_num
= ILT_CLIENT_SRC
;
8178 ilt_client
->page_size
= SRC_ILT_PAGE_SZ
;
8179 ilt_client
->flags
= 0;
8180 ilt_client
->start
= line
;
8181 line
+= SRC_ILT_LINES
;
8182 ilt_client
->end
= line
- 1;
8185 "ilt client[SRC]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8188 ilt_client
->page_size
,
8190 ilog2(ilt_client
->page_size
>> 12));
8193 ilt_client
= &ilt
->clients
[ILT_CLIENT_TM
];
8194 ilt_client
->client_num
= ILT_CLIENT_TM
;
8195 ilt_client
->page_size
= TM_ILT_PAGE_SZ
;
8196 ilt_client
->flags
= 0;
8197 ilt_client
->start
= line
;
8198 line
+= TM_ILT_LINES
;
8199 ilt_client
->end
= line
- 1;
8202 "ilt client[TM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8205 ilt_client
->page_size
,
8207 ilog2(ilt_client
->page_size
>> 12));
8210 BUG_ON(line
> ILT_MAX_LINES
);
8214 * bnx2x_pf_q_prep_init - prepare INIT transition parameters
8216 * @bp: driver handle
8217 * @fp: pointer to fastpath
8218 * @init_params: pointer to parameters structure
8220 * parameters configured:
8221 * - HC configuration
8222 * - Queue's CDU context
8224 static void bnx2x_pf_q_prep_init(struct bnx2x
*bp
,
8225 struct bnx2x_fastpath
*fp
, struct bnx2x_queue_init_params
*init_params
)
8228 int cxt_index
, cxt_offset
;
8230 /* FCoE Queue uses Default SB, thus has no HC capabilities */
8231 if (!IS_FCOE_FP(fp
)) {
8232 __set_bit(BNX2X_Q_FLG_HC
, &init_params
->rx
.flags
);
8233 __set_bit(BNX2X_Q_FLG_HC
, &init_params
->tx
.flags
);
8235 /* If HC is supported, enable host coalescing in the transition
8238 __set_bit(BNX2X_Q_FLG_HC_EN
, &init_params
->rx
.flags
);
8239 __set_bit(BNX2X_Q_FLG_HC_EN
, &init_params
->tx
.flags
);
8242 init_params
->rx
.hc_rate
= bp
->rx_ticks
?
8243 (1000000 / bp
->rx_ticks
) : 0;
8244 init_params
->tx
.hc_rate
= bp
->tx_ticks
?
8245 (1000000 / bp
->tx_ticks
) : 0;
8248 init_params
->rx
.fw_sb_id
= init_params
->tx
.fw_sb_id
=
8252 * CQ index among the SB indices: FCoE clients uses the default
8253 * SB, therefore it's different.
8255 init_params
->rx
.sb_cq_index
= HC_INDEX_ETH_RX_CQ_CONS
;
8256 init_params
->tx
.sb_cq_index
= HC_INDEX_ETH_FIRST_TX_CQ_CONS
;
8259 /* set maximum number of COSs supported by this queue */
8260 init_params
->max_cos
= fp
->max_cos
;
8262 DP(NETIF_MSG_IFUP
, "fp: %d setting queue params max cos to: %d\n",
8263 fp
->index
, init_params
->max_cos
);
8265 /* set the context pointers queue object */
8266 for (cos
= FIRST_TX_COS_INDEX
; cos
< init_params
->max_cos
; cos
++) {
8267 cxt_index
= fp
->txdata_ptr
[cos
]->cid
/ ILT_PAGE_CIDS
;
8268 cxt_offset
= fp
->txdata_ptr
[cos
]->cid
- (cxt_index
*
8270 init_params
->cxts
[cos
] =
8271 &bp
->context
[cxt_index
].vcxt
[cxt_offset
].eth
;
8275 static int bnx2x_setup_tx_only(struct bnx2x
*bp
, struct bnx2x_fastpath
*fp
,
8276 struct bnx2x_queue_state_params
*q_params
,
8277 struct bnx2x_queue_setup_tx_only_params
*tx_only_params
,
8278 int tx_index
, bool leading
)
8280 memset(tx_only_params
, 0, sizeof(*tx_only_params
));
8282 /* Set the command */
8283 q_params
->cmd
= BNX2X_Q_CMD_SETUP_TX_ONLY
;
8285 /* Set tx-only QUEUE flags: don't zero statistics */
8286 tx_only_params
->flags
= bnx2x_get_common_flags(bp
, fp
, false);
8288 /* choose the index of the cid to send the slow path on */
8289 tx_only_params
->cid_index
= tx_index
;
8291 /* Set general TX_ONLY_SETUP parameters */
8292 bnx2x_pf_q_prep_general(bp
, fp
, &tx_only_params
->gen_params
, tx_index
);
8294 /* Set Tx TX_ONLY_SETUP parameters */
8295 bnx2x_pf_tx_q_prep(bp
, fp
, &tx_only_params
->txq_params
, tx_index
);
8298 "preparing to send tx-only ramrod for connection: cos %d, primary cid %d, cid %d, client id %d, sp-client id %d, flags %lx\n",
8299 tx_index
, q_params
->q_obj
->cids
[FIRST_TX_COS_INDEX
],
8300 q_params
->q_obj
->cids
[tx_index
], q_params
->q_obj
->cl_id
,
8301 tx_only_params
->gen_params
.spcl_id
, tx_only_params
->flags
);
8303 /* send the ramrod */
8304 return bnx2x_queue_state_change(bp
, q_params
);
8308 * bnx2x_setup_queue - setup queue
8310 * @bp: driver handle
8311 * @fp: pointer to fastpath
8312 * @leading: is leading
8314 * This function performs 2 steps in a Queue state machine
8315 * actually: 1) RESET->INIT 2) INIT->SETUP
8318 int bnx2x_setup_queue(struct bnx2x
*bp
, struct bnx2x_fastpath
*fp
,
8321 struct bnx2x_queue_state_params q_params
= {NULL
};
8322 struct bnx2x_queue_setup_params
*setup_params
=
8323 &q_params
.params
.setup
;
8324 struct bnx2x_queue_setup_tx_only_params
*tx_only_params
=
8325 &q_params
.params
.tx_only
;
8329 DP(NETIF_MSG_IFUP
, "setting up queue %d\n", fp
->index
);
8331 /* reset IGU state skip FCoE L2 queue */
8332 if (!IS_FCOE_FP(fp
))
8333 bnx2x_ack_sb(bp
, fp
->igu_sb_id
, USTORM_ID
, 0,
8336 q_params
.q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
8337 /* We want to wait for completion in this context */
8338 __set_bit(RAMROD_COMP_WAIT
, &q_params
.ramrod_flags
);
8340 /* Prepare the INIT parameters */
8341 bnx2x_pf_q_prep_init(bp
, fp
, &q_params
.params
.init
);
8343 /* Set the command */
8344 q_params
.cmd
= BNX2X_Q_CMD_INIT
;
8346 /* Change the state to INIT */
8347 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8349 BNX2X_ERR("Queue(%d) INIT failed\n", fp
->index
);
8353 DP(NETIF_MSG_IFUP
, "init complete\n");
8355 /* Now move the Queue to the SETUP state... */
8356 memset(setup_params
, 0, sizeof(*setup_params
));
8358 /* Set QUEUE flags */
8359 setup_params
->flags
= bnx2x_get_q_flags(bp
, fp
, leading
);
8361 /* Set general SETUP parameters */
8362 bnx2x_pf_q_prep_general(bp
, fp
, &setup_params
->gen_params
,
8363 FIRST_TX_COS_INDEX
);
8365 bnx2x_pf_rx_q_prep(bp
, fp
, &setup_params
->pause_params
,
8366 &setup_params
->rxq_params
);
8368 bnx2x_pf_tx_q_prep(bp
, fp
, &setup_params
->txq_params
,
8369 FIRST_TX_COS_INDEX
);
8371 /* Set the command */
8372 q_params
.cmd
= BNX2X_Q_CMD_SETUP
;
8375 bp
->fcoe_init
= true;
8377 /* Change the state to SETUP */
8378 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8380 BNX2X_ERR("Queue(%d) SETUP failed\n", fp
->index
);
8384 /* loop through the relevant tx-only indices */
8385 for (tx_index
= FIRST_TX_ONLY_COS_INDEX
;
8386 tx_index
< fp
->max_cos
;
8389 /* prepare and send tx-only ramrod*/
8390 rc
= bnx2x_setup_tx_only(bp
, fp
, &q_params
,
8391 tx_only_params
, tx_index
, leading
);
8393 BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n",
8394 fp
->index
, tx_index
);
8402 static int bnx2x_stop_queue(struct bnx2x
*bp
, int index
)
8404 struct bnx2x_fastpath
*fp
= &bp
->fp
[index
];
8405 struct bnx2x_fp_txdata
*txdata
;
8406 struct bnx2x_queue_state_params q_params
= {NULL
};
8409 DP(NETIF_MSG_IFDOWN
, "stopping queue %d cid %d\n", index
, fp
->cid
);
8411 q_params
.q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
8412 /* We want to wait for completion in this context */
8413 __set_bit(RAMROD_COMP_WAIT
, &q_params
.ramrod_flags
);
8415 /* close tx-only connections */
8416 for (tx_index
= FIRST_TX_ONLY_COS_INDEX
;
8417 tx_index
< fp
->max_cos
;
8420 /* ascertain this is a normal queue*/
8421 txdata
= fp
->txdata_ptr
[tx_index
];
8423 DP(NETIF_MSG_IFDOWN
, "stopping tx-only queue %d\n",
8426 /* send halt terminate on tx-only connection */
8427 q_params
.cmd
= BNX2X_Q_CMD_TERMINATE
;
8428 memset(&q_params
.params
.terminate
, 0,
8429 sizeof(q_params
.params
.terminate
));
8430 q_params
.params
.terminate
.cid_index
= tx_index
;
8432 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8436 /* send halt terminate on tx-only connection */
8437 q_params
.cmd
= BNX2X_Q_CMD_CFC_DEL
;
8438 memset(&q_params
.params
.cfc_del
, 0,
8439 sizeof(q_params
.params
.cfc_del
));
8440 q_params
.params
.cfc_del
.cid_index
= tx_index
;
8441 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8445 /* Stop the primary connection: */
8446 /* ...halt the connection */
8447 q_params
.cmd
= BNX2X_Q_CMD_HALT
;
8448 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8452 /* ...terminate the connection */
8453 q_params
.cmd
= BNX2X_Q_CMD_TERMINATE
;
8454 memset(&q_params
.params
.terminate
, 0,
8455 sizeof(q_params
.params
.terminate
));
8456 q_params
.params
.terminate
.cid_index
= FIRST_TX_COS_INDEX
;
8457 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8460 /* ...delete cfc entry */
8461 q_params
.cmd
= BNX2X_Q_CMD_CFC_DEL
;
8462 memset(&q_params
.params
.cfc_del
, 0,
8463 sizeof(q_params
.params
.cfc_del
));
8464 q_params
.params
.cfc_del
.cid_index
= FIRST_TX_COS_INDEX
;
8465 return bnx2x_queue_state_change(bp
, &q_params
);
8468 static void bnx2x_reset_func(struct bnx2x
*bp
)
8470 int port
= BP_PORT(bp
);
8471 int func
= BP_FUNC(bp
);
8474 /* Disable the function in the FW */
8475 REG_WR8(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_FUNC_EN_OFFSET(func
), 0);
8476 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+ CSTORM_FUNC_EN_OFFSET(func
), 0);
8477 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+ TSTORM_FUNC_EN_OFFSET(func
), 0);
8478 REG_WR8(bp
, BAR_USTRORM_INTMEM
+ USTORM_FUNC_EN_OFFSET(func
), 0);
8481 for_each_eth_queue(bp
, i
) {
8482 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
8483 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+
8484 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp
->fw_sb_id
),
8488 if (CNIC_LOADED(bp
))
8490 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+
8491 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET
8492 (bnx2x_cnic_fw_sb_id(bp
)), SB_DISABLED
);
8495 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+
8496 CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func
),
8499 for (i
= 0; i
< XSTORM_SPQ_DATA_SIZE
/ 4; i
++)
8500 REG_WR(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_SPQ_DATA_OFFSET(func
),
8504 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
8505 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, 0);
8506 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, 0);
8508 REG_WR(bp
, IGU_REG_LEADING_EDGE_LATCH
, 0);
8509 REG_WR(bp
, IGU_REG_TRAILING_EDGE_LATCH
, 0);
8512 if (CNIC_LOADED(bp
)) {
8513 /* Disable Timer scan */
8514 REG_WR(bp
, TM_REG_EN_LINEAR0_TIMER
+ port
*4, 0);
8516 * Wait for at least 10ms and up to 2 second for the timers
8519 for (i
= 0; i
< 200; i
++) {
8520 usleep_range(10000, 20000);
8521 if (!REG_RD(bp
, TM_REG_LIN0_SCAN_ON
+ port
*4))
8526 bnx2x_clear_func_ilt(bp
, func
);
8528 /* Timers workaround bug for E2: if this is vnic-3,
8529 * we need to set the entire ilt range for this timers.
8531 if (!CHIP_IS_E1x(bp
) && BP_VN(bp
) == 3) {
8532 struct ilt_client_info ilt_cli
;
8533 /* use dummy TM client */
8534 memset(&ilt_cli
, 0, sizeof(struct ilt_client_info
));
8536 ilt_cli
.end
= ILT_NUM_PAGE_ENTRIES
- 1;
8537 ilt_cli
.client_num
= ILT_CLIENT_TM
;
8539 bnx2x_ilt_boundry_init_op(bp
, &ilt_cli
, 0, INITOP_CLEAR
);
8542 /* this assumes that reset_port() called before reset_func()*/
8543 if (!CHIP_IS_E1x(bp
))
8544 bnx2x_pf_disable(bp
);
8549 static void bnx2x_reset_port(struct bnx2x
*bp
)
8551 int port
= BP_PORT(bp
);
8554 /* Reset physical Link */
8555 bnx2x__link_reset(bp
);
8557 REG_WR(bp
, NIG_REG_MASK_INTERRUPT_PORT0
+ port
*4, 0);
8559 /* Do not rcv packets to BRB */
8560 REG_WR(bp
, NIG_REG_LLH0_BRB1_DRV_MASK
+ port
*4, 0x0);
8561 /* Do not direct rcv packets that are not for MCP to the BRB */
8562 REG_WR(bp
, (port
? NIG_REG_LLH1_BRB1_NOT_MCP
:
8563 NIG_REG_LLH0_BRB1_NOT_MCP
), 0x0);
8566 REG_WR(bp
, MISC_REG_AEU_MASK_ATTN_FUNC_0
+ port
*4, 0);
8569 /* Check for BRB port occupancy */
8570 val
= REG_RD(bp
, BRB1_REG_PORT_NUM_OCC_BLOCKS_0
+ port
*4);
8572 DP(NETIF_MSG_IFDOWN
,
8573 "BRB1 is not empty %d blocks are occupied\n", val
);
8575 /* TODO: Close Doorbell port? */
8578 static int bnx2x_reset_hw(struct bnx2x
*bp
, u32 load_code
)
8580 struct bnx2x_func_state_params func_params
= {NULL
};
8582 /* Prepare parameters for function state transitions */
8583 __set_bit(RAMROD_COMP_WAIT
, &func_params
.ramrod_flags
);
8585 func_params
.f_obj
= &bp
->func_obj
;
8586 func_params
.cmd
= BNX2X_F_CMD_HW_RESET
;
8588 func_params
.params
.hw_init
.load_phase
= load_code
;
8590 return bnx2x_func_state_change(bp
, &func_params
);
8593 static int bnx2x_func_stop(struct bnx2x
*bp
)
8595 struct bnx2x_func_state_params func_params
= {NULL
};
8598 /* Prepare parameters for function state transitions */
8599 __set_bit(RAMROD_COMP_WAIT
, &func_params
.ramrod_flags
);
8600 func_params
.f_obj
= &bp
->func_obj
;
8601 func_params
.cmd
= BNX2X_F_CMD_STOP
;
8604 * Try to stop the function the 'good way'. If fails (in case
8605 * of a parity error during bnx2x_chip_cleanup()) and we are
8606 * not in a debug mode, perform a state transaction in order to
8607 * enable further HW_RESET transaction.
8609 rc
= bnx2x_func_state_change(bp
, &func_params
);
8611 #ifdef BNX2X_STOP_ON_ERROR
8614 BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry transaction\n");
8615 __set_bit(RAMROD_DRV_CLR_ONLY
, &func_params
.ramrod_flags
);
8616 return bnx2x_func_state_change(bp
, &func_params
);
8624 * bnx2x_send_unload_req - request unload mode from the MCP.
8626 * @bp: driver handle
8627 * @unload_mode: requested function's unload mode
8629 * Return unload mode returned by the MCP: COMMON, PORT or FUNC.
8631 u32
bnx2x_send_unload_req(struct bnx2x
*bp
, int unload_mode
)
8634 int port
= BP_PORT(bp
);
8636 /* Select the UNLOAD request mode */
8637 if (unload_mode
== UNLOAD_NORMAL
)
8638 reset_code
= DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS
;
8640 else if (bp
->flags
& NO_WOL_FLAG
)
8641 reset_code
= DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP
;
8644 u32 emac_base
= port
? GRCBASE_EMAC1
: GRCBASE_EMAC0
;
8645 u8
*mac_addr
= bp
->dev
->dev_addr
;
8649 /* The mac address is written to entries 1-4 to
8650 * preserve entry 0 which is used by the PMF
8652 u8 entry
= (BP_VN(bp
) + 1)*8;
8654 val
= (mac_addr
[0] << 8) | mac_addr
[1];
8655 EMAC_WR(bp
, EMAC_REG_EMAC_MAC_MATCH
+ entry
, val
);
8657 val
= (mac_addr
[2] << 24) | (mac_addr
[3] << 16) |
8658 (mac_addr
[4] << 8) | mac_addr
[5];
8659 EMAC_WR(bp
, EMAC_REG_EMAC_MAC_MATCH
+ entry
+ 4, val
);
8661 /* Enable the PME and clear the status */
8662 pci_read_config_word(bp
->pdev
, bp
->pm_cap
+ PCI_PM_CTRL
, &pmc
);
8663 pmc
|= PCI_PM_CTRL_PME_ENABLE
| PCI_PM_CTRL_PME_STATUS
;
8664 pci_write_config_word(bp
->pdev
, bp
->pm_cap
+ PCI_PM_CTRL
, pmc
);
8666 reset_code
= DRV_MSG_CODE_UNLOAD_REQ_WOL_EN
;
8669 reset_code
= DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS
;
8671 /* Send the request to the MCP */
8673 reset_code
= bnx2x_fw_command(bp
, reset_code
, 0);
8675 int path
= BP_PATH(bp
);
8677 DP(NETIF_MSG_IFDOWN
, "NO MCP - load counts[%d] %d, %d, %d\n",
8678 path
, load_count
[path
][0], load_count
[path
][1],
8679 load_count
[path
][2]);
8680 load_count
[path
][0]--;
8681 load_count
[path
][1 + port
]--;
8682 DP(NETIF_MSG_IFDOWN
, "NO MCP - new load counts[%d] %d, %d, %d\n",
8683 path
, load_count
[path
][0], load_count
[path
][1],
8684 load_count
[path
][2]);
8685 if (load_count
[path
][0] == 0)
8686 reset_code
= FW_MSG_CODE_DRV_UNLOAD_COMMON
;
8687 else if (load_count
[path
][1 + port
] == 0)
8688 reset_code
= FW_MSG_CODE_DRV_UNLOAD_PORT
;
8690 reset_code
= FW_MSG_CODE_DRV_UNLOAD_FUNCTION
;
8697 * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP.
8699 * @bp: driver handle
8700 * @keep_link: true iff link should be kept up
8702 void bnx2x_send_unload_done(struct bnx2x
*bp
, bool keep_link
)
8704 u32 reset_param
= keep_link
? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET
: 0;
8706 /* Report UNLOAD_DONE to MCP */
8708 bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_DONE
, reset_param
);
8711 static int bnx2x_func_wait_started(struct bnx2x
*bp
)
8714 int msix
= (bp
->flags
& USING_MSIX_FLAG
) ? 1 : 0;
8720 * (assumption: No Attention from MCP at this stage)
8721 * PMF probably in the middle of TX disable/enable transaction
8722 * 1. Sync IRS for default SB
8723 * 2. Sync SP queue - this guarantees us that attention handling started
8724 * 3. Wait, that TX disable/enable transaction completes
8726 * 1+2 guarantee that if DCBx attention was scheduled it already changed
8727 * pending bit of transaction from STARTED-->TX_STOPPED, if we already
8728 * received completion for the transaction the state is TX_STOPPED.
8729 * State will return to STARTED after completion of TX_STOPPED-->STARTED
8733 /* make sure default SB ISR is done */
8735 synchronize_irq(bp
->msix_table
[0].vector
);
8737 synchronize_irq(bp
->pdev
->irq
);
8739 flush_workqueue(bnx2x_wq
);
8741 while (bnx2x_func_get_state(bp
, &bp
->func_obj
) !=
8742 BNX2X_F_STATE_STARTED
&& tout
--)
8745 if (bnx2x_func_get_state(bp
, &bp
->func_obj
) !=
8746 BNX2X_F_STATE_STARTED
) {
8747 #ifdef BNX2X_STOP_ON_ERROR
8748 BNX2X_ERR("Wrong function state\n");
8752 * Failed to complete the transaction in a "good way"
8753 * Force both transactions with CLR bit
8755 struct bnx2x_func_state_params func_params
= {NULL
};
8757 DP(NETIF_MSG_IFDOWN
,
8758 "Hmmm... Unexpected function state! Forcing STARTED-->TX_ST0PPED-->STARTED\n");
8760 func_params
.f_obj
= &bp
->func_obj
;
8761 __set_bit(RAMROD_DRV_CLR_ONLY
,
8762 &func_params
.ramrod_flags
);
8764 /* STARTED-->TX_ST0PPED */
8765 func_params
.cmd
= BNX2X_F_CMD_TX_STOP
;
8766 bnx2x_func_state_change(bp
, &func_params
);
8768 /* TX_ST0PPED-->STARTED */
8769 func_params
.cmd
= BNX2X_F_CMD_TX_START
;
8770 return bnx2x_func_state_change(bp
, &func_params
);
8777 void bnx2x_chip_cleanup(struct bnx2x
*bp
, int unload_mode
, bool keep_link
)
8779 int port
= BP_PORT(bp
);
8782 struct bnx2x_mcast_ramrod_params rparam
= {NULL
};
8785 /* Wait until tx fastpath tasks complete */
8786 for_each_tx_queue(bp
, i
) {
8787 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
8789 for_each_cos_in_tx_queue(fp
, cos
)
8790 rc
= bnx2x_clean_tx_queue(bp
, fp
->txdata_ptr
[cos
]);
8791 #ifdef BNX2X_STOP_ON_ERROR
8797 /* Give HW time to discard old tx messages */
8798 usleep_range(1000, 2000);
8800 /* Clean all ETH MACs */
8801 rc
= bnx2x_del_all_macs(bp
, &bp
->sp_objs
[0].mac_obj
, BNX2X_ETH_MAC
,
8804 BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc
);
8806 /* Clean up UC list */
8807 rc
= bnx2x_del_all_macs(bp
, &bp
->sp_objs
[0].mac_obj
, BNX2X_UC_LIST_MAC
,
8810 BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n",
8814 if (!CHIP_IS_E1(bp
))
8815 REG_WR(bp
, NIG_REG_LLH0_FUNC_EN
+ port
*8, 0);
8817 /* Set "drop all" (stop Rx).
8818 * We need to take a netif_addr_lock() here in order to prevent
8819 * a race between the completion code and this code.
8821 netif_addr_lock_bh(bp
->dev
);
8822 /* Schedule the rx_mode command */
8823 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
))
8824 set_bit(BNX2X_FILTER_RX_MODE_SCHED
, &bp
->sp_state
);
8826 bnx2x_set_storm_rx_mode(bp
);
8828 /* Cleanup multicast configuration */
8829 rparam
.mcast_obj
= &bp
->mcast_obj
;
8830 rc
= bnx2x_config_mcast(bp
, &rparam
, BNX2X_MCAST_CMD_DEL
);
8832 BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc
);
8834 netif_addr_unlock_bh(bp
->dev
);
8836 bnx2x_iov_chip_cleanup(bp
);
8839 * Send the UNLOAD_REQUEST to the MCP. This will return if
8840 * this function should perform FUNC, PORT or COMMON HW
8843 reset_code
= bnx2x_send_unload_req(bp
, unload_mode
);
8846 * (assumption: No Attention from MCP at this stage)
8847 * PMF probably in the middle of TX disable/enable transaction
8849 rc
= bnx2x_func_wait_started(bp
);
8851 BNX2X_ERR("bnx2x_func_wait_started failed\n");
8852 #ifdef BNX2X_STOP_ON_ERROR
8857 /* Close multi and leading connections
8858 * Completions for ramrods are collected in a synchronous way
8860 for_each_eth_queue(bp
, i
)
8861 if (bnx2x_stop_queue(bp
, i
))
8862 #ifdef BNX2X_STOP_ON_ERROR
8868 if (CNIC_LOADED(bp
)) {
8869 for_each_cnic_queue(bp
, i
)
8870 if (bnx2x_stop_queue(bp
, i
))
8871 #ifdef BNX2X_STOP_ON_ERROR
8878 /* If SP settings didn't get completed so far - something
8879 * very wrong has happen.
8881 if (!bnx2x_wait_sp_comp(bp
, ~0x0UL
))
8882 BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n");
8884 #ifndef BNX2X_STOP_ON_ERROR
8887 rc
= bnx2x_func_stop(bp
);
8889 BNX2X_ERR("Function stop failed!\n");
8890 #ifdef BNX2X_STOP_ON_ERROR
8895 /* Disable HW interrupts, NAPI */
8896 bnx2x_netif_stop(bp
, 1);
8897 /* Delete all NAPI objects */
8898 bnx2x_del_all_napi(bp
);
8899 if (CNIC_LOADED(bp
))
8900 bnx2x_del_all_napi_cnic(bp
);
8905 /* Reset the chip */
8906 rc
= bnx2x_reset_hw(bp
, reset_code
);
8908 BNX2X_ERR("HW_RESET failed\n");
8910 /* Report UNLOAD_DONE to MCP */
8911 bnx2x_send_unload_done(bp
, keep_link
);
8914 void bnx2x_disable_close_the_gate(struct bnx2x
*bp
)
8918 DP(NETIF_MSG_IFDOWN
, "Disabling \"close the gates\"\n");
8920 if (CHIP_IS_E1(bp
)) {
8921 int port
= BP_PORT(bp
);
8922 u32 addr
= port
? MISC_REG_AEU_MASK_ATTN_FUNC_1
:
8923 MISC_REG_AEU_MASK_ATTN_FUNC_0
;
8925 val
= REG_RD(bp
, addr
);
8927 REG_WR(bp
, addr
, val
);
8929 val
= REG_RD(bp
, MISC_REG_AEU_GENERAL_MASK
);
8930 val
&= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK
|
8931 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK
);
8932 REG_WR(bp
, MISC_REG_AEU_GENERAL_MASK
, val
);
8936 /* Close gates #2, #3 and #4: */
8937 static void bnx2x_set_234_gates(struct bnx2x
*bp
, bool close
)
8941 /* Gates #2 and #4a are closed/opened for "not E1" only */
8942 if (!CHIP_IS_E1(bp
)) {
8944 REG_WR(bp
, PXP_REG_HST_DISCARD_DOORBELLS
, !!close
);
8946 REG_WR(bp
, PXP_REG_HST_DISCARD_INTERNAL_WRITES
, !!close
);
8950 if (CHIP_IS_E1x(bp
)) {
8951 /* Prevent interrupts from HC on both ports */
8952 val
= REG_RD(bp
, HC_REG_CONFIG_1
);
8953 REG_WR(bp
, HC_REG_CONFIG_1
,
8954 (!close
) ? (val
| HC_CONFIG_1_REG_BLOCK_DISABLE_1
) :
8955 (val
& ~(u32
)HC_CONFIG_1_REG_BLOCK_DISABLE_1
));
8957 val
= REG_RD(bp
, HC_REG_CONFIG_0
);
8958 REG_WR(bp
, HC_REG_CONFIG_0
,
8959 (!close
) ? (val
| HC_CONFIG_0_REG_BLOCK_DISABLE_0
) :
8960 (val
& ~(u32
)HC_CONFIG_0_REG_BLOCK_DISABLE_0
));
8962 /* Prevent incoming interrupts in IGU */
8963 val
= REG_RD(bp
, IGU_REG_BLOCK_CONFIGURATION
);
8965 REG_WR(bp
, IGU_REG_BLOCK_CONFIGURATION
,
8967 (val
| IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE
) :
8968 (val
& ~(u32
)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE
));
8971 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
, "%s gates #2, #3 and #4\n",
8972 close
? "closing" : "opening");
8976 #define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */
8978 static void bnx2x_clp_reset_prep(struct bnx2x
*bp
, u32
*magic_val
)
8980 /* Do some magic... */
8981 u32 val
= MF_CFG_RD(bp
, shared_mf_config
.clp_mb
);
8982 *magic_val
= val
& SHARED_MF_CLP_MAGIC
;
8983 MF_CFG_WR(bp
, shared_mf_config
.clp_mb
, val
| SHARED_MF_CLP_MAGIC
);
8987 * bnx2x_clp_reset_done - restore the value of the `magic' bit.
8989 * @bp: driver handle
8990 * @magic_val: old value of the `magic' bit.
8992 static void bnx2x_clp_reset_done(struct bnx2x
*bp
, u32 magic_val
)
8994 /* Restore the `magic' bit value... */
8995 u32 val
= MF_CFG_RD(bp
, shared_mf_config
.clp_mb
);
8996 MF_CFG_WR(bp
, shared_mf_config
.clp_mb
,
8997 (val
& (~SHARED_MF_CLP_MAGIC
)) | magic_val
);
9001 * bnx2x_reset_mcp_prep - prepare for MCP reset.
9003 * @bp: driver handle
9004 * @magic_val: old value of 'magic' bit.
9006 * Takes care of CLP configurations.
9008 static void bnx2x_reset_mcp_prep(struct bnx2x
*bp
, u32
*magic_val
)
9011 u32 validity_offset
;
9013 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
, "Starting\n");
9015 /* Set `magic' bit in order to save MF config */
9016 if (!CHIP_IS_E1(bp
))
9017 bnx2x_clp_reset_prep(bp
, magic_val
);
9019 /* Get shmem offset */
9020 shmem
= REG_RD(bp
, MISC_REG_SHARED_MEM_ADDR
);
9022 offsetof(struct shmem_region
, validity_map
[BP_PORT(bp
)]);
9024 /* Clear validity map flags */
9026 REG_WR(bp
, shmem
+ validity_offset
, 0);
9029 #define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
9030 #define MCP_ONE_TIMEOUT 100 /* 100 ms */
9033 * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT
9035 * @bp: driver handle
9037 static void bnx2x_mcp_wait_one(struct bnx2x
*bp
)
9039 /* special handling for emulation and FPGA,
9040 wait 10 times longer */
9041 if (CHIP_REV_IS_SLOW(bp
))
9042 msleep(MCP_ONE_TIMEOUT
*10);
9044 msleep(MCP_ONE_TIMEOUT
);
9048 * initializes bp->common.shmem_base and waits for validity signature to appear
9050 static int bnx2x_init_shmem(struct bnx2x
*bp
)
9056 bp
->common
.shmem_base
= REG_RD(bp
, MISC_REG_SHARED_MEM_ADDR
);
9057 if (bp
->common
.shmem_base
) {
9058 val
= SHMEM_RD(bp
, validity_map
[BP_PORT(bp
)]);
9059 if (val
& SHR_MEM_VALIDITY_MB
)
9063 bnx2x_mcp_wait_one(bp
);
9065 } while (cnt
++ < (MCP_TIMEOUT
/ MCP_ONE_TIMEOUT
));
9067 BNX2X_ERR("BAD MCP validity signature\n");
9072 static int bnx2x_reset_mcp_comp(struct bnx2x
*bp
, u32 magic_val
)
9074 int rc
= bnx2x_init_shmem(bp
);
9076 /* Restore the `magic' bit value */
9077 if (!CHIP_IS_E1(bp
))
9078 bnx2x_clp_reset_done(bp
, magic_val
);
9083 static void bnx2x_pxp_prep(struct bnx2x
*bp
)
9085 if (!CHIP_IS_E1(bp
)) {
9086 REG_WR(bp
, PXP2_REG_RD_START_INIT
, 0);
9087 REG_WR(bp
, PXP2_REG_RQ_RBC_DONE
, 0);
9093 * Reset the whole chip except for:
9095 * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by
9098 * - MISC (including AEU)
9102 static void bnx2x_process_kill_chip_reset(struct bnx2x
*bp
, bool global
)
9104 u32 not_reset_mask1
, reset_mask1
, not_reset_mask2
, reset_mask2
;
9105 u32 global_bits2
, stay_reset2
;
9108 * Bits that have to be set in reset_mask2 if we want to reset 'global'
9109 * (per chip) blocks.
9112 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU
|
9113 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE
;
9115 /* Don't reset the following blocks.
9116 * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
9117 * reset, as in 4 port device they might still be owned
9118 * by the MCP (there is only one leader per path).
9121 MISC_REGISTERS_RESET_REG_1_RST_HC
|
9122 MISC_REGISTERS_RESET_REG_1_RST_PXPV
|
9123 MISC_REGISTERS_RESET_REG_1_RST_PXP
;
9126 MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO
|
9127 MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE
|
9128 MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE
|
9129 MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE
|
9130 MISC_REGISTERS_RESET_REG_2_RST_RBCN
|
9131 MISC_REGISTERS_RESET_REG_2_RST_GRC
|
9132 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE
|
9133 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B
|
9134 MISC_REGISTERS_RESET_REG_2_RST_ATC
|
9135 MISC_REGISTERS_RESET_REG_2_PGLC
|
9136 MISC_REGISTERS_RESET_REG_2_RST_BMAC0
|
9137 MISC_REGISTERS_RESET_REG_2_RST_BMAC1
|
9138 MISC_REGISTERS_RESET_REG_2_RST_EMAC0
|
9139 MISC_REGISTERS_RESET_REG_2_RST_EMAC1
|
9140 MISC_REGISTERS_RESET_REG_2_UMAC0
|
9141 MISC_REGISTERS_RESET_REG_2_UMAC1
;
9144 * Keep the following blocks in reset:
9145 * - all xxMACs are handled by the bnx2x_link code.
9148 MISC_REGISTERS_RESET_REG_2_XMAC
|
9149 MISC_REGISTERS_RESET_REG_2_XMAC_SOFT
;
9151 /* Full reset masks according to the chip */
9152 reset_mask1
= 0xffffffff;
9155 reset_mask2
= 0xffff;
9156 else if (CHIP_IS_E1H(bp
))
9157 reset_mask2
= 0x1ffff;
9158 else if (CHIP_IS_E2(bp
))
9159 reset_mask2
= 0xfffff;
9160 else /* CHIP_IS_E3 */
9161 reset_mask2
= 0x3ffffff;
9163 /* Don't reset global blocks unless we need to */
9165 reset_mask2
&= ~global_bits2
;
9168 * In case of attention in the QM, we need to reset PXP
9169 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
9170 * because otherwise QM reset would release 'close the gates' shortly
9171 * before resetting the PXP, then the PSWRQ would send a write
9172 * request to PGLUE. Then when PXP is reset, PGLUE would try to
9173 * read the payload data from PSWWR, but PSWWR would not
9174 * respond. The write queue in PGLUE would stuck, dmae commands
9175 * would not return. Therefore it's important to reset the second
9176 * reset register (containing the
9177 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
9178 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
9181 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_2_CLEAR
,
9182 reset_mask2
& (~not_reset_mask2
));
9184 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
,
9185 reset_mask1
& (~not_reset_mask1
));
9190 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_2_SET
,
9191 reset_mask2
& (~stay_reset2
));
9196 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
, reset_mask1
);
9201 * bnx2x_er_poll_igu_vq - poll for pending writes bit.
9202 * It should get cleared in no more than 1s.
9204 * @bp: driver handle
9206 * It should get cleared in no more than 1s. Returns 0 if
9207 * pending writes bit gets cleared.
9209 static int bnx2x_er_poll_igu_vq(struct bnx2x
*bp
)
9215 pend_bits
= REG_RD(bp
, IGU_REG_PENDING_BITS_STATUS
);
9220 usleep_range(1000, 2000);
9221 } while (cnt
-- > 0);
9224 BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n",
9232 static int bnx2x_process_kill(struct bnx2x
*bp
, bool global
)
9236 u32 sr_cnt
, blk_cnt
, port_is_idle_0
, port_is_idle_1
, pgl_exp_rom2
;
9239 /* Empty the Tetris buffer, wait for 1s */
9241 sr_cnt
= REG_RD(bp
, PXP2_REG_RD_SR_CNT
);
9242 blk_cnt
= REG_RD(bp
, PXP2_REG_RD_BLK_CNT
);
9243 port_is_idle_0
= REG_RD(bp
, PXP2_REG_RD_PORT_IS_IDLE_0
);
9244 port_is_idle_1
= REG_RD(bp
, PXP2_REG_RD_PORT_IS_IDLE_1
);
9245 pgl_exp_rom2
= REG_RD(bp
, PXP2_REG_PGL_EXP_ROM2
);
9247 tags_63_32
= REG_RD(bp
, PGLUE_B_REG_TAGS_63_32
);
9249 if ((sr_cnt
== 0x7e) && (blk_cnt
== 0xa0) &&
9250 ((port_is_idle_0
& 0x1) == 0x1) &&
9251 ((port_is_idle_1
& 0x1) == 0x1) &&
9252 (pgl_exp_rom2
== 0xffffffff) &&
9253 (!CHIP_IS_E3(bp
) || (tags_63_32
== 0xffffffff)))
9255 usleep_range(1000, 2000);
9256 } while (cnt
-- > 0);
9259 BNX2X_ERR("Tetris buffer didn't get empty or there are still outstanding read requests after 1s!\n");
9260 BNX2X_ERR("sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n",
9261 sr_cnt
, blk_cnt
, port_is_idle_0
, port_is_idle_1
,
9268 /* Close gates #2, #3 and #4 */
9269 bnx2x_set_234_gates(bp
, true);
9271 /* Poll for IGU VQs for 57712 and newer chips */
9272 if (!CHIP_IS_E1x(bp
) && bnx2x_er_poll_igu_vq(bp
))
9275 /* TBD: Indicate that "process kill" is in progress to MCP */
9277 /* Clear "unprepared" bit */
9278 REG_WR(bp
, MISC_REG_UNPREPARED
, 0);
9281 /* Make sure all is written to the chip before the reset */
9284 /* Wait for 1ms to empty GLUE and PCI-E core queues,
9285 * PSWHST, GRC and PSWRD Tetris buffer.
9287 usleep_range(1000, 2000);
9289 /* Prepare to chip reset: */
9292 bnx2x_reset_mcp_prep(bp
, &val
);
9298 /* reset the chip */
9299 bnx2x_process_kill_chip_reset(bp
, global
);
9302 /* Recover after reset: */
9304 if (global
&& bnx2x_reset_mcp_comp(bp
, val
))
9307 /* TBD: Add resetting the NO_MCP mode DB here */
9309 /* Open the gates #2, #3 and #4 */
9310 bnx2x_set_234_gates(bp
, false);
9312 /* TBD: IGU/AEU preparation bring back the AEU/IGU to a
9313 * reset state, re-enable attentions. */
9318 static int bnx2x_leader_reset(struct bnx2x
*bp
)
9321 bool global
= bnx2x_reset_is_global(bp
);
9324 /* if not going to reset MCP - load "fake" driver to reset HW while
9325 * driver is owner of the HW
9327 if (!global
&& !BP_NOMCP(bp
)) {
9328 load_code
= bnx2x_fw_command(bp
, DRV_MSG_CODE_LOAD_REQ
,
9329 DRV_MSG_CODE_LOAD_REQ_WITH_LFA
);
9331 BNX2X_ERR("MCP response failure, aborting\n");
9333 goto exit_leader_reset
;
9335 if ((load_code
!= FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
) &&
9336 (load_code
!= FW_MSG_CODE_DRV_LOAD_COMMON
)) {
9337 BNX2X_ERR("MCP unexpected resp, aborting\n");
9339 goto exit_leader_reset2
;
9341 load_code
= bnx2x_fw_command(bp
, DRV_MSG_CODE_LOAD_DONE
, 0);
9343 BNX2X_ERR("MCP response failure, aborting\n");
9345 goto exit_leader_reset2
;
9349 /* Try to recover after the failure */
9350 if (bnx2x_process_kill(bp
, global
)) {
9351 BNX2X_ERR("Something bad had happen on engine %d! Aii!\n",
9354 goto exit_leader_reset2
;
9358 * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver
9361 bnx2x_set_reset_done(bp
);
9363 bnx2x_clear_reset_global(bp
);
9366 /* unload "fake driver" if it was loaded */
9367 if (!global
&& !BP_NOMCP(bp
)) {
9368 bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP
, 0);
9369 bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_DONE
, 0);
9373 bnx2x_release_leader_lock(bp
);
9378 static void bnx2x_recovery_failed(struct bnx2x
*bp
)
9380 netdev_err(bp
->dev
, "Recovery has failed. Power cycle is needed.\n");
9382 /* Disconnect this device */
9383 netif_device_detach(bp
->dev
);
9386 * Block ifup for all function on this engine until "process kill"
9389 bnx2x_set_reset_in_progress(bp
);
9391 /* Shut down the power */
9392 bnx2x_set_power_state(bp
, PCI_D3hot
);
9394 bp
->recovery_state
= BNX2X_RECOVERY_FAILED
;
9400 * Assumption: runs under rtnl lock. This together with the fact
9401 * that it's called only from bnx2x_sp_rtnl() ensure that it
9402 * will never be called when netif_running(bp->dev) is false.
9404 static void bnx2x_parity_recover(struct bnx2x
*bp
)
9406 bool global
= false;
9407 u32 error_recovered
, error_unrecovered
;
9410 DP(NETIF_MSG_HW
, "Handling parity\n");
9412 switch (bp
->recovery_state
) {
9413 case BNX2X_RECOVERY_INIT
:
9414 DP(NETIF_MSG_HW
, "State is BNX2X_RECOVERY_INIT\n");
9415 is_parity
= bnx2x_chk_parity_attn(bp
, &global
, false);
9416 WARN_ON(!is_parity
);
9418 /* Try to get a LEADER_LOCK HW lock */
9419 if (bnx2x_trylock_leader_lock(bp
)) {
9420 bnx2x_set_reset_in_progress(bp
);
9422 * Check if there is a global attention and if
9423 * there was a global attention, set the global
9428 bnx2x_set_reset_global(bp
);
9433 /* Stop the driver */
9434 /* If interface has been removed - break */
9435 if (bnx2x_nic_unload(bp
, UNLOAD_RECOVERY
, false))
9438 bp
->recovery_state
= BNX2X_RECOVERY_WAIT
;
9440 /* Ensure "is_leader", MCP command sequence and
9441 * "recovery_state" update values are seen on other
9447 case BNX2X_RECOVERY_WAIT
:
9448 DP(NETIF_MSG_HW
, "State is BNX2X_RECOVERY_WAIT\n");
9449 if (bp
->is_leader
) {
9450 int other_engine
= BP_PATH(bp
) ? 0 : 1;
9451 bool other_load_status
=
9452 bnx2x_get_load_status(bp
, other_engine
);
9454 bnx2x_get_load_status(bp
, BP_PATH(bp
));
9455 global
= bnx2x_reset_is_global(bp
);
9458 * In case of a parity in a global block, let
9459 * the first leader that performs a
9460 * leader_reset() reset the global blocks in
9461 * order to clear global attentions. Otherwise
9462 * the gates will remain closed for that
9466 (global
&& other_load_status
)) {
9467 /* Wait until all other functions get
9470 schedule_delayed_work(&bp
->sp_rtnl_task
,
9474 /* If all other functions got down -
9475 * try to bring the chip back to
9476 * normal. In any case it's an exit
9477 * point for a leader.
9479 if (bnx2x_leader_reset(bp
)) {
9480 bnx2x_recovery_failed(bp
);
9484 /* If we are here, means that the
9485 * leader has succeeded and doesn't
9486 * want to be a leader any more. Try
9487 * to continue as a none-leader.
9491 } else { /* non-leader */
9492 if (!bnx2x_reset_is_done(bp
, BP_PATH(bp
))) {
9493 /* Try to get a LEADER_LOCK HW lock as
9494 * long as a former leader may have
9495 * been unloaded by the user or
9496 * released a leadership by another
9499 if (bnx2x_trylock_leader_lock(bp
)) {
9500 /* I'm a leader now! Restart a
9507 schedule_delayed_work(&bp
->sp_rtnl_task
,
9513 * If there was a global attention, wait
9514 * for it to be cleared.
9516 if (bnx2x_reset_is_global(bp
)) {
9517 schedule_delayed_work(
9524 bp
->eth_stats
.recoverable_error
;
9526 bp
->eth_stats
.unrecoverable_error
;
9527 bp
->recovery_state
=
9528 BNX2X_RECOVERY_NIC_LOADING
;
9529 if (bnx2x_nic_load(bp
, LOAD_NORMAL
)) {
9530 error_unrecovered
++;
9532 "Recovery failed. Power cycle needed\n");
9533 /* Disconnect this device */
9534 netif_device_detach(bp
->dev
);
9535 /* Shut down the power */
9536 bnx2x_set_power_state(
9540 bp
->recovery_state
=
9541 BNX2X_RECOVERY_DONE
;
9545 bp
->eth_stats
.recoverable_error
=
9547 bp
->eth_stats
.unrecoverable_error
=
9559 static int bnx2x_close(struct net_device
*dev
);
9561 /* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is
9562 * scheduled on a general queue in order to prevent a dead lock.
9564 static void bnx2x_sp_rtnl_task(struct work_struct
*work
)
9566 struct bnx2x
*bp
= container_of(work
, struct bnx2x
, sp_rtnl_task
.work
);
9570 if (!netif_running(bp
->dev
)) {
9575 if (unlikely(bp
->recovery_state
!= BNX2X_RECOVERY_DONE
)) {
9576 #ifdef BNX2X_STOP_ON_ERROR
9577 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n"
9578 "you will need to reboot when done\n");
9579 goto sp_rtnl_not_reset
;
9582 * Clear all pending SP commands as we are going to reset the
9585 bp
->sp_rtnl_state
= 0;
9588 bnx2x_parity_recover(bp
);
9594 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT
, &bp
->sp_rtnl_state
)) {
9595 #ifdef BNX2X_STOP_ON_ERROR
9596 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n"
9597 "you will need to reboot when done\n");
9598 goto sp_rtnl_not_reset
;
9602 * Clear all pending SP commands as we are going to reset the
9605 bp
->sp_rtnl_state
= 0;
9608 bnx2x_nic_unload(bp
, UNLOAD_NORMAL
, true);
9609 bnx2x_nic_load(bp
, LOAD_NORMAL
);
9614 #ifdef BNX2X_STOP_ON_ERROR
9617 if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC
, &bp
->sp_rtnl_state
))
9618 bnx2x_setup_tc(bp
->dev
, bp
->dcbx_port_params
.ets
.num_of_cos
);
9619 if (test_and_clear_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE
, &bp
->sp_rtnl_state
))
9620 bnx2x_after_function_update(bp
);
9622 * in case of fan failure we need to reset id if the "stop on error"
9623 * debug flag is set, since we trying to prevent permanent overheating
9626 if (test_and_clear_bit(BNX2X_SP_RTNL_FAN_FAILURE
, &bp
->sp_rtnl_state
)) {
9627 DP(NETIF_MSG_HW
, "fan failure detected. Unloading driver\n");
9628 netif_device_detach(bp
->dev
);
9629 bnx2x_close(bp
->dev
);
9634 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST
, &bp
->sp_rtnl_state
)) {
9636 "sending set mcast vf pf channel message from rtnl sp-task\n");
9637 bnx2x_vfpf_set_mcast(bp
->dev
);
9639 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN
,
9640 &bp
->sp_rtnl_state
)){
9641 if (!test_bit(__LINK_STATE_NOCARRIER
, &bp
->dev
->state
)) {
9642 bnx2x_tx_disable(bp
);
9643 BNX2X_ERR("PF indicated channel is not servicable anymore. This means this VF device is no longer operational\n");
9647 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_STORM_RX_MODE
,
9648 &bp
->sp_rtnl_state
)) {
9650 "sending set storm rx mode vf pf channel message from rtnl sp-task\n");
9651 bnx2x_vfpf_storm_rx_mode(bp
);
9654 if (test_and_clear_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN
,
9655 &bp
->sp_rtnl_state
))
9656 bnx2x_pf_set_vfs_vlan(bp
);
9658 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP
, &bp
->sp_rtnl_state
))
9659 bnx2x_dcbx_stop_hw_tx(bp
);
9661 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_RESUME
, &bp
->sp_rtnl_state
))
9662 bnx2x_dcbx_resume_hw_tx(bp
);
9664 /* work which needs rtnl lock not-taken (as it takes the lock itself and
9665 * can be called from other contexts as well)
9669 /* enable SR-IOV if applicable */
9670 if (IS_SRIOV(bp
) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV
,
9671 &bp
->sp_rtnl_state
)) {
9672 bnx2x_disable_sriov(bp
);
9673 bnx2x_enable_sriov(bp
);
9677 static void bnx2x_period_task(struct work_struct
*work
)
9679 struct bnx2x
*bp
= container_of(work
, struct bnx2x
, period_task
.work
);
9681 if (!netif_running(bp
->dev
))
9682 goto period_task_exit
;
9684 if (CHIP_REV_IS_SLOW(bp
)) {
9685 BNX2X_ERR("period task called on emulation, ignoring\n");
9686 goto period_task_exit
;
9689 bnx2x_acquire_phy_lock(bp
);
9691 * The barrier is needed to ensure the ordering between the writing to
9692 * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
9697 bnx2x_period_func(&bp
->link_params
, &bp
->link_vars
);
9699 /* Re-queue task in 1 sec */
9700 queue_delayed_work(bnx2x_wq
, &bp
->period_task
, 1*HZ
);
9703 bnx2x_release_phy_lock(bp
);
9709 * Init service functions
9712 u32
bnx2x_get_pretend_reg(struct bnx2x
*bp
)
9714 u32 base
= PXP2_REG_PGL_PRETEND_FUNC_F0
;
9715 u32 stride
= PXP2_REG_PGL_PRETEND_FUNC_F1
- base
;
9716 return base
+ (BP_ABS_FUNC(bp
)) * stride
;
9719 static void bnx2x_prev_unload_close_mac(struct bnx2x
*bp
,
9720 struct bnx2x_mac_vals
*vals
)
9722 u32 val
, base_addr
, offset
, mask
, reset_reg
;
9723 bool mac_stopped
= false;
9724 u8 port
= BP_PORT(bp
);
9726 /* reset addresses as they also mark which values were changed */
9727 vals
->bmac_addr
= 0;
9728 vals
->umac_addr
= 0;
9729 vals
->xmac_addr
= 0;
9730 vals
->emac_addr
= 0;
9732 reset_reg
= REG_RD(bp
, MISC_REG_RESET_REG_2
);
9734 if (!CHIP_IS_E3(bp
)) {
9735 val
= REG_RD(bp
, NIG_REG_BMAC0_REGS_OUT_EN
+ port
* 4);
9736 mask
= MISC_REGISTERS_RESET_REG_2_RST_BMAC0
<< port
;
9737 if ((mask
& reset_reg
) && val
) {
9739 BNX2X_DEV_INFO("Disable bmac Rx\n");
9740 base_addr
= BP_PORT(bp
) ? NIG_REG_INGRESS_BMAC1_MEM
9741 : NIG_REG_INGRESS_BMAC0_MEM
;
9742 offset
= CHIP_IS_E2(bp
) ? BIGMAC2_REGISTER_BMAC_CONTROL
9743 : BIGMAC_REGISTER_BMAC_CONTROL
;
9746 * use rd/wr since we cannot use dmae. This is safe
9747 * since MCP won't access the bus due to the request
9748 * to unload, and no function on the path can be
9749 * loaded at this time.
9751 wb_data
[0] = REG_RD(bp
, base_addr
+ offset
);
9752 wb_data
[1] = REG_RD(bp
, base_addr
+ offset
+ 0x4);
9753 vals
->bmac_addr
= base_addr
+ offset
;
9754 vals
->bmac_val
[0] = wb_data
[0];
9755 vals
->bmac_val
[1] = wb_data
[1];
9756 wb_data
[0] &= ~BMAC_CONTROL_RX_ENABLE
;
9757 REG_WR(bp
, vals
->bmac_addr
, wb_data
[0]);
9758 REG_WR(bp
, vals
->bmac_addr
+ 0x4, wb_data
[1]);
9760 BNX2X_DEV_INFO("Disable emac Rx\n");
9761 vals
->emac_addr
= NIG_REG_NIG_EMAC0_EN
+ BP_PORT(bp
)*4;
9762 vals
->emac_val
= REG_RD(bp
, vals
->emac_addr
);
9763 REG_WR(bp
, vals
->emac_addr
, 0);
9766 if (reset_reg
& MISC_REGISTERS_RESET_REG_2_XMAC
) {
9767 BNX2X_DEV_INFO("Disable xmac Rx\n");
9768 base_addr
= BP_PORT(bp
) ? GRCBASE_XMAC1
: GRCBASE_XMAC0
;
9769 val
= REG_RD(bp
, base_addr
+ XMAC_REG_PFC_CTRL_HI
);
9770 REG_WR(bp
, base_addr
+ XMAC_REG_PFC_CTRL_HI
,
9772 REG_WR(bp
, base_addr
+ XMAC_REG_PFC_CTRL_HI
,
9774 vals
->xmac_addr
= base_addr
+ XMAC_REG_CTRL
;
9775 vals
->xmac_val
= REG_RD(bp
, vals
->xmac_addr
);
9776 REG_WR(bp
, vals
->xmac_addr
, 0);
9779 mask
= MISC_REGISTERS_RESET_REG_2_UMAC0
<< port
;
9780 if (mask
& reset_reg
) {
9781 BNX2X_DEV_INFO("Disable umac Rx\n");
9782 base_addr
= BP_PORT(bp
) ? GRCBASE_UMAC1
: GRCBASE_UMAC0
;
9783 vals
->umac_addr
= base_addr
+ UMAC_REG_COMMAND_CONFIG
;
9784 vals
->umac_val
= REG_RD(bp
, vals
->umac_addr
);
9785 REG_WR(bp
, vals
->umac_addr
, 0);
9794 #define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
9795 #define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
9796 #define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
9797 #define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
9799 static void bnx2x_prev_unload_undi_inc(struct bnx2x
*bp
, u8 port
, u8 inc
)
9802 u32 tmp_reg
= REG_RD(bp
, BNX2X_PREV_UNDI_PROD_ADDR(port
));
9804 rcq
= BNX2X_PREV_UNDI_RCQ(tmp_reg
) + inc
;
9805 bd
= BNX2X_PREV_UNDI_BD(tmp_reg
) + inc
;
9807 tmp_reg
= BNX2X_PREV_UNDI_PROD(rcq
, bd
);
9808 REG_WR(bp
, BNX2X_PREV_UNDI_PROD_ADDR(port
), tmp_reg
);
9810 BNX2X_DEV_INFO("UNDI producer [%d] rings bd -> 0x%04x, rcq -> 0x%04x\n",
9814 static int bnx2x_prev_mcp_done(struct bnx2x
*bp
)
9816 u32 rc
= bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_DONE
,
9817 DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET
);
9819 BNX2X_ERR("MCP response failure, aborting\n");
9826 static struct bnx2x_prev_path_list
*
9827 bnx2x_prev_path_get_entry(struct bnx2x
*bp
)
9829 struct bnx2x_prev_path_list
*tmp_list
;
9831 list_for_each_entry(tmp_list
, &bnx2x_prev_list
, list
)
9832 if (PCI_SLOT(bp
->pdev
->devfn
) == tmp_list
->slot
&&
9833 bp
->pdev
->bus
->number
== tmp_list
->bus
&&
9834 BP_PATH(bp
) == tmp_list
->path
)
9840 static int bnx2x_prev_path_mark_eeh(struct bnx2x
*bp
)
9842 struct bnx2x_prev_path_list
*tmp_list
;
9845 rc
= down_interruptible(&bnx2x_prev_sem
);
9847 BNX2X_ERR("Received %d when tried to take lock\n", rc
);
9851 tmp_list
= bnx2x_prev_path_get_entry(bp
);
9856 BNX2X_ERR("path %d: Entry does not exist for eeh; Flow occurs before initial insmod is over ?\n",
9860 up(&bnx2x_prev_sem
);
9865 static bool bnx2x_prev_is_path_marked(struct bnx2x
*bp
)
9867 struct bnx2x_prev_path_list
*tmp_list
;
9870 if (down_trylock(&bnx2x_prev_sem
))
9873 tmp_list
= bnx2x_prev_path_get_entry(bp
);
9875 if (tmp_list
->aer
) {
9876 DP(NETIF_MSG_HW
, "Path %d was marked by AER\n",
9880 BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n",
9885 up(&bnx2x_prev_sem
);
9890 bool bnx2x_port_after_undi(struct bnx2x
*bp
)
9892 struct bnx2x_prev_path_list
*entry
;
9895 down(&bnx2x_prev_sem
);
9897 entry
= bnx2x_prev_path_get_entry(bp
);
9898 val
= !!(entry
&& (entry
->undi
& (1 << BP_PORT(bp
))));
9900 up(&bnx2x_prev_sem
);
9905 static int bnx2x_prev_mark_path(struct bnx2x
*bp
, bool after_undi
)
9907 struct bnx2x_prev_path_list
*tmp_list
;
9910 rc
= down_interruptible(&bnx2x_prev_sem
);
9912 BNX2X_ERR("Received %d when tried to take lock\n", rc
);
9916 /* Check whether the entry for this path already exists */
9917 tmp_list
= bnx2x_prev_path_get_entry(bp
);
9919 if (!tmp_list
->aer
) {
9920 BNX2X_ERR("Re-Marking the path.\n");
9922 DP(NETIF_MSG_HW
, "Removing AER indication from path %d\n",
9926 up(&bnx2x_prev_sem
);
9929 up(&bnx2x_prev_sem
);
9931 /* Create an entry for this path and add it */
9932 tmp_list
= kmalloc(sizeof(struct bnx2x_prev_path_list
), GFP_KERNEL
);
9934 BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n");
9938 tmp_list
->bus
= bp
->pdev
->bus
->number
;
9939 tmp_list
->slot
= PCI_SLOT(bp
->pdev
->devfn
);
9940 tmp_list
->path
= BP_PATH(bp
);
9942 tmp_list
->undi
= after_undi
? (1 << BP_PORT(bp
)) : 0;
9944 rc
= down_interruptible(&bnx2x_prev_sem
);
9946 BNX2X_ERR("Received %d when tried to take lock\n", rc
);
9949 DP(NETIF_MSG_HW
, "Marked path [%d] - finished previous unload\n",
9951 list_add(&tmp_list
->list
, &bnx2x_prev_list
);
9952 up(&bnx2x_prev_sem
);
9958 static int bnx2x_do_flr(struct bnx2x
*bp
)
9962 struct pci_dev
*dev
= bp
->pdev
;
9964 if (CHIP_IS_E1x(bp
)) {
9965 BNX2X_DEV_INFO("FLR not supported in E1/E1H\n");
9969 /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
9970 if (bp
->common
.bc_ver
< REQ_BC_VER_4_INITIATE_FLR
) {
9971 BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n",
9976 /* Wait for Transaction Pending bit clean */
9977 for (i
= 0; i
< 4; i
++) {
9979 msleep((1 << (i
- 1)) * 100);
9981 pcie_capability_read_word(dev
, PCI_EXP_DEVSTA
, &status
);
9982 if (!(status
& PCI_EXP_DEVSTA_TRPND
))
9987 "transaction is not cleared; proceeding with reset anyway\n");
9991 BNX2X_DEV_INFO("Initiating FLR\n");
9992 bnx2x_fw_command(bp
, DRV_MSG_CODE_INITIATE_FLR
, 0);
9997 static int bnx2x_prev_unload_uncommon(struct bnx2x
*bp
)
10001 BNX2X_DEV_INFO("Uncommon unload Flow\n");
10003 /* Test if previous unload process was already finished for this path */
10004 if (bnx2x_prev_is_path_marked(bp
))
10005 return bnx2x_prev_mcp_done(bp
);
10007 BNX2X_DEV_INFO("Path is unmarked\n");
10009 /* If function has FLR capabilities, and existing FW version matches
10010 * the one required, then FLR will be sufficient to clean any residue
10011 * left by previous driver
10013 rc
= bnx2x_nic_load_analyze_req(bp
, FW_MSG_CODE_DRV_LOAD_FUNCTION
);
10016 /* fw version is good */
10017 BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n");
10018 rc
= bnx2x_do_flr(bp
);
10022 /* FLR was performed */
10023 BNX2X_DEV_INFO("FLR successful\n");
10027 BNX2X_DEV_INFO("Could not FLR\n");
10029 /* Close the MCP request, return failure*/
10030 rc
= bnx2x_prev_mcp_done(bp
);
10032 rc
= BNX2X_PREV_WAIT_NEEDED
;
10037 static int bnx2x_prev_unload_common(struct bnx2x
*bp
)
10039 u32 reset_reg
, tmp_reg
= 0, rc
;
10040 bool prev_undi
= false;
10041 struct bnx2x_mac_vals mac_vals
;
10043 /* It is possible a previous function received 'common' answer,
10044 * but hasn't loaded yet, therefore creating a scenario of
10045 * multiple functions receiving 'common' on the same path.
10047 BNX2X_DEV_INFO("Common unload Flow\n");
10049 memset(&mac_vals
, 0, sizeof(mac_vals
));
10051 if (bnx2x_prev_is_path_marked(bp
))
10052 return bnx2x_prev_mcp_done(bp
);
10054 reset_reg
= REG_RD(bp
, MISC_REG_RESET_REG_1
);
10056 /* Reset should be performed after BRB is emptied */
10057 if (reset_reg
& MISC_REGISTERS_RESET_REG_1_RST_BRB1
) {
10058 u32 timer_count
= 1000;
10060 /* Close the MAC Rx to prevent BRB from filling up */
10061 bnx2x_prev_unload_close_mac(bp
, &mac_vals
);
10063 /* close LLH filters towards the BRB */
10064 bnx2x_set_rx_filter(&bp
->link_params
, 0);
10066 /* Check if the UNDI driver was previously loaded
10067 * UNDI driver initializes CID offset for normal bell to 0x7
10069 if (reset_reg
& MISC_REGISTERS_RESET_REG_1_RST_DORQ
) {
10070 tmp_reg
= REG_RD(bp
, DORQ_REG_NORM_CID_OFST
);
10071 if (tmp_reg
== 0x7) {
10072 BNX2X_DEV_INFO("UNDI previously loaded\n");
10074 /* clear the UNDI indication */
10075 REG_WR(bp
, DORQ_REG_NORM_CID_OFST
, 0);
10076 /* clear possible idle check errors */
10077 REG_RD(bp
, NIG_REG_NIG_INT_STS_CLR_0
);
10080 if (!CHIP_IS_E1x(bp
))
10081 /* block FW from writing to host */
10082 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 0);
10084 /* wait until BRB is empty */
10085 tmp_reg
= REG_RD(bp
, BRB1_REG_NUM_OF_FULL_BLOCKS
);
10086 while (timer_count
) {
10087 u32 prev_brb
= tmp_reg
;
10089 tmp_reg
= REG_RD(bp
, BRB1_REG_NUM_OF_FULL_BLOCKS
);
10093 BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg
);
10095 /* reset timer as long as BRB actually gets emptied */
10096 if (prev_brb
> tmp_reg
)
10097 timer_count
= 1000;
10101 /* If UNDI resides in memory, manually increment it */
10103 bnx2x_prev_unload_undi_inc(bp
, BP_PORT(bp
), 1);
10109 BNX2X_ERR("Failed to empty BRB, hope for the best\n");
10112 /* No packets are in the pipeline, path is ready for reset */
10113 bnx2x_reset_common(bp
);
10115 if (mac_vals
.xmac_addr
)
10116 REG_WR(bp
, mac_vals
.xmac_addr
, mac_vals
.xmac_val
);
10117 if (mac_vals
.umac_addr
)
10118 REG_WR(bp
, mac_vals
.umac_addr
, mac_vals
.umac_val
);
10119 if (mac_vals
.emac_addr
)
10120 REG_WR(bp
, mac_vals
.emac_addr
, mac_vals
.emac_val
);
10121 if (mac_vals
.bmac_addr
) {
10122 REG_WR(bp
, mac_vals
.bmac_addr
, mac_vals
.bmac_val
[0]);
10123 REG_WR(bp
, mac_vals
.bmac_addr
+ 4, mac_vals
.bmac_val
[1]);
10126 rc
= bnx2x_prev_mark_path(bp
, prev_undi
);
10128 bnx2x_prev_mcp_done(bp
);
10132 return bnx2x_prev_mcp_done(bp
);
10135 /* previous driver DMAE transaction may have occurred when pre-boot stage ended
10136 * and boot began, or when kdump kernel was loaded. Either case would invalidate
10137 * the addresses of the transaction, resulting in was-error bit set in the pci
10138 * causing all hw-to-host pcie transactions to timeout. If this happened we want
10139 * to clear the interrupt which detected this from the pglueb and the was done
10142 static void bnx2x_prev_interrupted_dmae(struct bnx2x
*bp
)
10144 if (!CHIP_IS_E1x(bp
)) {
10145 u32 val
= REG_RD(bp
, PGLUE_B_REG_PGLUE_B_INT_STS
);
10146 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN
) {
10148 "'was error' bit was found to be set in pglueb upon startup. Clearing\n");
10149 REG_WR(bp
, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR
,
10155 static int bnx2x_prev_unload(struct bnx2x
*bp
)
10157 int time_counter
= 10;
10158 u32 rc
, fw
, hw_lock_reg
, hw_lock_val
;
10159 BNX2X_DEV_INFO("Entering Previous Unload Flow\n");
10161 /* clear hw from errors which may have resulted from an interrupted
10162 * dmae transaction.
10164 bnx2x_prev_interrupted_dmae(bp
);
10166 /* Release previously held locks */
10167 hw_lock_reg
= (BP_FUNC(bp
) <= 5) ?
10168 (MISC_REG_DRIVER_CONTROL_1
+ BP_FUNC(bp
) * 8) :
10169 (MISC_REG_DRIVER_CONTROL_7
+ (BP_FUNC(bp
) - 6) * 8);
10171 hw_lock_val
= REG_RD(bp
, hw_lock_reg
);
10173 if (hw_lock_val
& HW_LOCK_RESOURCE_NVRAM
) {
10174 BNX2X_DEV_INFO("Release Previously held NVRAM lock\n");
10175 REG_WR(bp
, MCP_REG_MCPR_NVM_SW_ARB
,
10176 (MCPR_NVM_SW_ARB_ARB_REQ_CLR1
<< BP_PORT(bp
)));
10179 BNX2X_DEV_INFO("Release Previously held hw lock\n");
10180 REG_WR(bp
, hw_lock_reg
, 0xffffffff);
10182 BNX2X_DEV_INFO("No need to release hw/nvram locks\n");
10184 if (MCPR_ACCESS_LOCK_LOCK
& REG_RD(bp
, MCP_REG_MCPR_ACCESS_LOCK
)) {
10185 BNX2X_DEV_INFO("Release previously held alr\n");
10186 bnx2x_release_alr(bp
);
10191 /* Lock MCP using an unload request */
10192 fw
= bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS
, 0);
10194 BNX2X_ERR("MCP response failure, aborting\n");
10199 rc
= down_interruptible(&bnx2x_prev_sem
);
10201 BNX2X_ERR("Cannot check for AER; Received %d when tried to take lock\n",
10204 /* If Path is marked by EEH, ignore unload status */
10205 aer
= !!(bnx2x_prev_path_get_entry(bp
) &&
10206 bnx2x_prev_path_get_entry(bp
)->aer
);
10207 up(&bnx2x_prev_sem
);
10210 if (fw
== FW_MSG_CODE_DRV_UNLOAD_COMMON
|| aer
) {
10211 rc
= bnx2x_prev_unload_common(bp
);
10215 /* non-common reply from MCP might require looping */
10216 rc
= bnx2x_prev_unload_uncommon(bp
);
10217 if (rc
!= BNX2X_PREV_WAIT_NEEDED
)
10221 } while (--time_counter
);
10223 if (!time_counter
|| rc
) {
10224 BNX2X_ERR("Failed unloading previous driver, aborting\n");
10228 /* Mark function if its port was used to boot from SAN */
10229 if (bnx2x_port_after_undi(bp
))
10230 bp
->link_params
.feature_config_flags
|=
10231 FEATURE_CONFIG_BOOT_FROM_SAN
;
10233 BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc
);
10238 static void bnx2x_get_common_hwinfo(struct bnx2x
*bp
)
10240 u32 val
, val2
, val3
, val4
, id
, boot_mode
;
10243 /* Get the chip revision id and number. */
10244 /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
10245 val
= REG_RD(bp
, MISC_REG_CHIP_NUM
);
10246 id
= ((val
& 0xffff) << 16);
10247 val
= REG_RD(bp
, MISC_REG_CHIP_REV
);
10248 id
|= ((val
& 0xf) << 12);
10250 /* Metal is read from PCI regs, but we can't access >=0x400 from
10251 * the configuration space (so we need to reg_rd)
10253 val
= REG_RD(bp
, PCICFG_OFFSET
+ PCI_ID_VAL3
);
10254 id
|= (((val
>> 24) & 0xf) << 4);
10255 val
= REG_RD(bp
, MISC_REG_BOND_ID
);
10257 bp
->common
.chip_id
= id
;
10259 /* force 57811 according to MISC register */
10260 if (REG_RD(bp
, MISC_REG_CHIP_TYPE
) & MISC_REG_CHIP_TYPE_57811_MASK
) {
10261 if (CHIP_IS_57810(bp
))
10262 bp
->common
.chip_id
= (CHIP_NUM_57811
<< 16) |
10263 (bp
->common
.chip_id
& 0x0000FFFF);
10264 else if (CHIP_IS_57810_MF(bp
))
10265 bp
->common
.chip_id
= (CHIP_NUM_57811_MF
<< 16) |
10266 (bp
->common
.chip_id
& 0x0000FFFF);
10267 bp
->common
.chip_id
|= 0x1;
10270 /* Set doorbell size */
10271 bp
->db_size
= (1 << BNX2X_DB_SHIFT
);
10273 if (!CHIP_IS_E1x(bp
)) {
10274 val
= REG_RD(bp
, MISC_REG_PORT4MODE_EN_OVWR
);
10275 if ((val
& 1) == 0)
10276 val
= REG_RD(bp
, MISC_REG_PORT4MODE_EN
);
10278 val
= (val
>> 1) & 1;
10279 BNX2X_DEV_INFO("chip is in %s\n", val
? "4_PORT_MODE" :
10281 bp
->common
.chip_port_mode
= val
? CHIP_4_PORT_MODE
:
10284 if (CHIP_MODE_IS_4_PORT(bp
))
10285 bp
->pfid
= (bp
->pf_num
>> 1); /* 0..3 */
10287 bp
->pfid
= (bp
->pf_num
& 0x6); /* 0, 2, 4, 6 */
10289 bp
->common
.chip_port_mode
= CHIP_PORT_MODE_NONE
; /* N/A */
10290 bp
->pfid
= bp
->pf_num
; /* 0..7 */
10293 BNX2X_DEV_INFO("pf_id: %x", bp
->pfid
);
10295 bp
->link_params
.chip_id
= bp
->common
.chip_id
;
10296 BNX2X_DEV_INFO("chip ID is 0x%x\n", id
);
10298 val
= (REG_RD(bp
, 0x2874) & 0x55);
10299 if ((bp
->common
.chip_id
& 0x1) ||
10300 (CHIP_IS_E1(bp
) && val
) || (CHIP_IS_E1H(bp
) && (val
== 0x55))) {
10301 bp
->flags
|= ONE_PORT_FLAG
;
10302 BNX2X_DEV_INFO("single port device\n");
10305 val
= REG_RD(bp
, MCP_REG_MCPR_NVM_CFG4
);
10306 bp
->common
.flash_size
= (BNX2X_NVRAM_1MB_SIZE
<<
10307 (val
& MCPR_NVM_CFG4_FLASH_SIZE
));
10308 BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
10309 bp
->common
.flash_size
, bp
->common
.flash_size
);
10311 bnx2x_init_shmem(bp
);
10313 bp
->common
.shmem2_base
= REG_RD(bp
, (BP_PATH(bp
) ?
10314 MISC_REG_GENERIC_CR_1
:
10315 MISC_REG_GENERIC_CR_0
));
10317 bp
->link_params
.shmem_base
= bp
->common
.shmem_base
;
10318 bp
->link_params
.shmem2_base
= bp
->common
.shmem2_base
;
10319 if (SHMEM2_RD(bp
, size
) >
10320 (u32
)offsetof(struct shmem2_region
, lfa_host_addr
[BP_PORT(bp
)]))
10321 bp
->link_params
.lfa_base
=
10322 REG_RD(bp
, bp
->common
.shmem2_base
+
10323 (u32
)offsetof(struct shmem2_region
,
10324 lfa_host_addr
[BP_PORT(bp
)]));
10326 bp
->link_params
.lfa_base
= 0;
10327 BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n",
10328 bp
->common
.shmem_base
, bp
->common
.shmem2_base
);
10330 if (!bp
->common
.shmem_base
) {
10331 BNX2X_DEV_INFO("MCP not active\n");
10332 bp
->flags
|= NO_MCP_FLAG
;
10336 bp
->common
.hw_config
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.config
);
10337 BNX2X_DEV_INFO("hw_config 0x%08x\n", bp
->common
.hw_config
);
10339 bp
->link_params
.hw_led_mode
= ((bp
->common
.hw_config
&
10340 SHARED_HW_CFG_LED_MODE_MASK
) >>
10341 SHARED_HW_CFG_LED_MODE_SHIFT
);
10343 bp
->link_params
.feature_config_flags
= 0;
10344 val
= SHMEM_RD(bp
, dev_info
.shared_feature_config
.config
);
10345 if (val
& SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED
)
10346 bp
->link_params
.feature_config_flags
|=
10347 FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED
;
10349 bp
->link_params
.feature_config_flags
&=
10350 ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED
;
10352 val
= SHMEM_RD(bp
, dev_info
.bc_rev
) >> 8;
10353 bp
->common
.bc_ver
= val
;
10354 BNX2X_DEV_INFO("bc_ver %X\n", val
);
10355 if (val
< BNX2X_BC_VER
) {
10356 /* for now only warn
10357 * later we might need to enforce this */
10358 BNX2X_ERR("This driver needs bc_ver %X but found %X, please upgrade BC\n",
10359 BNX2X_BC_VER
, val
);
10361 bp
->link_params
.feature_config_flags
|=
10362 (val
>= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL
) ?
10363 FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY
: 0;
10365 bp
->link_params
.feature_config_flags
|=
10366 (val
>= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL
) ?
10367 FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY
: 0;
10368 bp
->link_params
.feature_config_flags
|=
10369 (val
>= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED
) ?
10370 FEATURE_CONFIG_BC_SUPPORTS_AFEX
: 0;
10371 bp
->link_params
.feature_config_flags
|=
10372 (val
>= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED
) ?
10373 FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED
: 0;
10375 bp
->link_params
.feature_config_flags
|=
10376 (val
>= REQ_BC_VER_4_MT_SUPPORTED
) ?
10377 FEATURE_CONFIG_MT_SUPPORT
: 0;
10379 bp
->flags
|= (val
>= REQ_BC_VER_4_PFC_STATS_SUPPORTED
) ?
10380 BC_SUPPORTS_PFC_STATS
: 0;
10382 bp
->flags
|= (val
>= REQ_BC_VER_4_FCOE_FEATURES
) ?
10383 BC_SUPPORTS_FCOE_FEATURES
: 0;
10385 bp
->flags
|= (val
>= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF
) ?
10386 BC_SUPPORTS_DCBX_MSG_NON_PMF
: 0;
10388 bp
->flags
|= (val
>= REQ_BC_VER_4_RMMOD_CMD
) ?
10389 BC_SUPPORTS_RMMOD_CMD
: 0;
10391 boot_mode
= SHMEM_RD(bp
,
10392 dev_info
.port_feature_config
[BP_PORT(bp
)].mba_config
) &
10393 PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK
;
10394 switch (boot_mode
) {
10395 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE
:
10396 bp
->common
.boot_mode
= FEATURE_ETH_BOOTMODE_PXE
;
10398 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB
:
10399 bp
->common
.boot_mode
= FEATURE_ETH_BOOTMODE_ISCSI
;
10401 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT
:
10402 bp
->common
.boot_mode
= FEATURE_ETH_BOOTMODE_FCOE
;
10404 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE
:
10405 bp
->common
.boot_mode
= FEATURE_ETH_BOOTMODE_NONE
;
10409 pci_read_config_word(bp
->pdev
, bp
->pm_cap
+ PCI_PM_PMC
, &pmc
);
10410 bp
->flags
|= (pmc
& PCI_PM_CAP_PME_D3cold
) ? 0 : NO_WOL_FLAG
;
10412 BNX2X_DEV_INFO("%sWoL capable\n",
10413 (bp
->flags
& NO_WOL_FLAG
) ? "not " : "");
10415 val
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.part_num
);
10416 val2
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.part_num
[4]);
10417 val3
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.part_num
[8]);
10418 val4
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.part_num
[12]);
10420 dev_info(&bp
->pdev
->dev
, "part number %X-%X-%X-%X\n",
10421 val
, val2
, val3
, val4
);
10424 #define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
10425 #define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
10427 static int bnx2x_get_igu_cam_info(struct bnx2x
*bp
)
10429 int pfid
= BP_FUNC(bp
);
10432 u8 fid
, igu_sb_cnt
= 0;
10434 bp
->igu_base_sb
= 0xff;
10435 if (CHIP_INT_MODE_IS_BC(bp
)) {
10436 int vn
= BP_VN(bp
);
10437 igu_sb_cnt
= bp
->igu_sb_cnt
;
10438 bp
->igu_base_sb
= (CHIP_MODE_IS_4_PORT(bp
) ? pfid
: vn
) *
10441 bp
->igu_dsb_id
= E1HVN_MAX
* FP_SB_MAX_E1x
+
10442 (CHIP_MODE_IS_4_PORT(bp
) ? pfid
: vn
);
10447 /* IGU in normal mode - read CAM */
10448 for (igu_sb_id
= 0; igu_sb_id
< IGU_REG_MAPPING_MEMORY_SIZE
;
10450 val
= REG_RD(bp
, IGU_REG_MAPPING_MEMORY
+ igu_sb_id
* 4);
10451 if (!(val
& IGU_REG_MAPPING_MEMORY_VALID
))
10453 fid
= IGU_FID(val
);
10454 if ((fid
& IGU_FID_ENCODE_IS_PF
)) {
10455 if ((fid
& IGU_FID_PF_NUM_MASK
) != pfid
)
10457 if (IGU_VEC(val
) == 0)
10458 /* default status block */
10459 bp
->igu_dsb_id
= igu_sb_id
;
10461 if (bp
->igu_base_sb
== 0xff)
10462 bp
->igu_base_sb
= igu_sb_id
;
10468 #ifdef CONFIG_PCI_MSI
10469 /* Due to new PF resource allocation by MFW T7.4 and above, it's
10470 * optional that number of CAM entries will not be equal to the value
10471 * advertised in PCI.
10472 * Driver should use the minimal value of both as the actual status
10475 bp
->igu_sb_cnt
= min_t(int, bp
->igu_sb_cnt
, igu_sb_cnt
);
10478 if (igu_sb_cnt
== 0) {
10479 BNX2X_ERR("CAM configuration error\n");
10486 static void bnx2x_link_settings_supported(struct bnx2x
*bp
, u32 switch_cfg
)
10488 int cfg_size
= 0, idx
, port
= BP_PORT(bp
);
10490 /* Aggregation of supported attributes of all external phys */
10491 bp
->port
.supported
[0] = 0;
10492 bp
->port
.supported
[1] = 0;
10493 switch (bp
->link_params
.num_phys
) {
10495 bp
->port
.supported
[0] = bp
->link_params
.phy
[INT_PHY
].supported
;
10499 bp
->port
.supported
[0] = bp
->link_params
.phy
[EXT_PHY1
].supported
;
10503 if (bp
->link_params
.multi_phy_config
&
10504 PORT_HW_CFG_PHY_SWAPPED_ENABLED
) {
10505 bp
->port
.supported
[1] =
10506 bp
->link_params
.phy
[EXT_PHY1
].supported
;
10507 bp
->port
.supported
[0] =
10508 bp
->link_params
.phy
[EXT_PHY2
].supported
;
10510 bp
->port
.supported
[0] =
10511 bp
->link_params
.phy
[EXT_PHY1
].supported
;
10512 bp
->port
.supported
[1] =
10513 bp
->link_params
.phy
[EXT_PHY2
].supported
;
10519 if (!(bp
->port
.supported
[0] || bp
->port
.supported
[1])) {
10520 BNX2X_ERR("NVRAM config error. BAD phy config. PHY1 config 0x%x, PHY2 config 0x%x\n",
10522 dev_info
.port_hw_config
[port
].external_phy_config
),
10524 dev_info
.port_hw_config
[port
].external_phy_config2
));
10528 if (CHIP_IS_E3(bp
))
10529 bp
->port
.phy_addr
= REG_RD(bp
, MISC_REG_WC0_CTRL_PHY_ADDR
);
10531 switch (switch_cfg
) {
10532 case SWITCH_CFG_1G
:
10533 bp
->port
.phy_addr
= REG_RD(
10534 bp
, NIG_REG_SERDES0_CTRL_PHY_ADDR
+ port
*0x10);
10536 case SWITCH_CFG_10G
:
10537 bp
->port
.phy_addr
= REG_RD(
10538 bp
, NIG_REG_XGXS0_CTRL_PHY_ADDR
+ port
*0x18);
10541 BNX2X_ERR("BAD switch_cfg link_config 0x%x\n",
10542 bp
->port
.link_config
[0]);
10546 BNX2X_DEV_INFO("phy_addr 0x%x\n", bp
->port
.phy_addr
);
10547 /* mask what we support according to speed_cap_mask per configuration */
10548 for (idx
= 0; idx
< cfg_size
; idx
++) {
10549 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10550 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF
))
10551 bp
->port
.supported
[idx
] &= ~SUPPORTED_10baseT_Half
;
10553 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10554 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL
))
10555 bp
->port
.supported
[idx
] &= ~SUPPORTED_10baseT_Full
;
10557 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10558 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF
))
10559 bp
->port
.supported
[idx
] &= ~SUPPORTED_100baseT_Half
;
10561 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10562 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL
))
10563 bp
->port
.supported
[idx
] &= ~SUPPORTED_100baseT_Full
;
10565 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10566 PORT_HW_CFG_SPEED_CAPABILITY_D0_1G
))
10567 bp
->port
.supported
[idx
] &= ~(SUPPORTED_1000baseT_Half
|
10568 SUPPORTED_1000baseT_Full
);
10570 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10571 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G
))
10572 bp
->port
.supported
[idx
] &= ~SUPPORTED_2500baseX_Full
;
10574 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10575 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G
))
10576 bp
->port
.supported
[idx
] &= ~SUPPORTED_10000baseT_Full
;
10578 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10579 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G
))
10580 bp
->port
.supported
[idx
] &= ~SUPPORTED_20000baseKR2_Full
;
10583 BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp
->port
.supported
[0],
10584 bp
->port
.supported
[1]);
10587 static void bnx2x_link_settings_requested(struct bnx2x
*bp
)
10589 u32 link_config
, idx
, cfg_size
= 0;
10590 bp
->port
.advertising
[0] = 0;
10591 bp
->port
.advertising
[1] = 0;
10592 switch (bp
->link_params
.num_phys
) {
10601 for (idx
= 0; idx
< cfg_size
; idx
++) {
10602 bp
->link_params
.req_duplex
[idx
] = DUPLEX_FULL
;
10603 link_config
= bp
->port
.link_config
[idx
];
10604 switch (link_config
& PORT_FEATURE_LINK_SPEED_MASK
) {
10605 case PORT_FEATURE_LINK_SPEED_AUTO
:
10606 if (bp
->port
.supported
[idx
] & SUPPORTED_Autoneg
) {
10607 bp
->link_params
.req_line_speed
[idx
] =
10609 bp
->port
.advertising
[idx
] |=
10610 bp
->port
.supported
[idx
];
10611 if (bp
->link_params
.phy
[EXT_PHY1
].type
==
10612 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833
)
10613 bp
->port
.advertising
[idx
] |=
10614 (SUPPORTED_100baseT_Half
|
10615 SUPPORTED_100baseT_Full
);
10617 /* force 10G, no AN */
10618 bp
->link_params
.req_line_speed
[idx
] =
10620 bp
->port
.advertising
[idx
] |=
10621 (ADVERTISED_10000baseT_Full
|
10627 case PORT_FEATURE_LINK_SPEED_10M_FULL
:
10628 if (bp
->port
.supported
[idx
] & SUPPORTED_10baseT_Full
) {
10629 bp
->link_params
.req_line_speed
[idx
] =
10631 bp
->port
.advertising
[idx
] |=
10632 (ADVERTISED_10baseT_Full
|
10635 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
10637 bp
->link_params
.speed_cap_mask
[idx
]);
10642 case PORT_FEATURE_LINK_SPEED_10M_HALF
:
10643 if (bp
->port
.supported
[idx
] & SUPPORTED_10baseT_Half
) {
10644 bp
->link_params
.req_line_speed
[idx
] =
10646 bp
->link_params
.req_duplex
[idx
] =
10648 bp
->port
.advertising
[idx
] |=
10649 (ADVERTISED_10baseT_Half
|
10652 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
10654 bp
->link_params
.speed_cap_mask
[idx
]);
10659 case PORT_FEATURE_LINK_SPEED_100M_FULL
:
10660 if (bp
->port
.supported
[idx
] &
10661 SUPPORTED_100baseT_Full
) {
10662 bp
->link_params
.req_line_speed
[idx
] =
10664 bp
->port
.advertising
[idx
] |=
10665 (ADVERTISED_100baseT_Full
|
10668 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
10670 bp
->link_params
.speed_cap_mask
[idx
]);
10675 case PORT_FEATURE_LINK_SPEED_100M_HALF
:
10676 if (bp
->port
.supported
[idx
] &
10677 SUPPORTED_100baseT_Half
) {
10678 bp
->link_params
.req_line_speed
[idx
] =
10680 bp
->link_params
.req_duplex
[idx
] =
10682 bp
->port
.advertising
[idx
] |=
10683 (ADVERTISED_100baseT_Half
|
10686 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
10688 bp
->link_params
.speed_cap_mask
[idx
]);
10693 case PORT_FEATURE_LINK_SPEED_1G
:
10694 if (bp
->port
.supported
[idx
] &
10695 SUPPORTED_1000baseT_Full
) {
10696 bp
->link_params
.req_line_speed
[idx
] =
10698 bp
->port
.advertising
[idx
] |=
10699 (ADVERTISED_1000baseT_Full
|
10702 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
10704 bp
->link_params
.speed_cap_mask
[idx
]);
10709 case PORT_FEATURE_LINK_SPEED_2_5G
:
10710 if (bp
->port
.supported
[idx
] &
10711 SUPPORTED_2500baseX_Full
) {
10712 bp
->link_params
.req_line_speed
[idx
] =
10714 bp
->port
.advertising
[idx
] |=
10715 (ADVERTISED_2500baseX_Full
|
10718 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
10720 bp
->link_params
.speed_cap_mask
[idx
]);
10725 case PORT_FEATURE_LINK_SPEED_10G_CX4
:
10726 if (bp
->port
.supported
[idx
] &
10727 SUPPORTED_10000baseT_Full
) {
10728 bp
->link_params
.req_line_speed
[idx
] =
10730 bp
->port
.advertising
[idx
] |=
10731 (ADVERTISED_10000baseT_Full
|
10734 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
10736 bp
->link_params
.speed_cap_mask
[idx
]);
10740 case PORT_FEATURE_LINK_SPEED_20G
:
10741 bp
->link_params
.req_line_speed
[idx
] = SPEED_20000
;
10745 BNX2X_ERR("NVRAM config error. BAD link speed link_config 0x%x\n",
10747 bp
->link_params
.req_line_speed
[idx
] =
10749 bp
->port
.advertising
[idx
] =
10750 bp
->port
.supported
[idx
];
10754 bp
->link_params
.req_flow_ctrl
[idx
] = (link_config
&
10755 PORT_FEATURE_FLOW_CONTROL_MASK
);
10756 if (bp
->link_params
.req_flow_ctrl
[idx
] ==
10757 BNX2X_FLOW_CTRL_AUTO
) {
10758 if (!(bp
->port
.supported
[idx
] & SUPPORTED_Autoneg
))
10759 bp
->link_params
.req_flow_ctrl
[idx
] =
10760 BNX2X_FLOW_CTRL_NONE
;
10762 bnx2x_set_requested_fc(bp
);
10765 BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x advertising 0x%x\n",
10766 bp
->link_params
.req_line_speed
[idx
],
10767 bp
->link_params
.req_duplex
[idx
],
10768 bp
->link_params
.req_flow_ctrl
[idx
],
10769 bp
->port
.advertising
[idx
]);
10773 static void bnx2x_set_mac_buf(u8
*mac_buf
, u32 mac_lo
, u16 mac_hi
)
10775 __be16 mac_hi_be
= cpu_to_be16(mac_hi
);
10776 __be32 mac_lo_be
= cpu_to_be32(mac_lo
);
10777 memcpy(mac_buf
, &mac_hi_be
, sizeof(mac_hi_be
));
10778 memcpy(mac_buf
+ sizeof(mac_hi_be
), &mac_lo_be
, sizeof(mac_lo_be
));
10781 static void bnx2x_get_port_hwinfo(struct bnx2x
*bp
)
10783 int port
= BP_PORT(bp
);
10785 u32 ext_phy_type
, ext_phy_config
, eee_mode
;
10787 bp
->link_params
.bp
= bp
;
10788 bp
->link_params
.port
= port
;
10790 bp
->link_params
.lane_config
=
10791 SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].lane_config
);
10793 bp
->link_params
.speed_cap_mask
[0] =
10795 dev_info
.port_hw_config
[port
].speed_capability_mask
) &
10796 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK
;
10797 bp
->link_params
.speed_cap_mask
[1] =
10799 dev_info
.port_hw_config
[port
].speed_capability_mask2
) &
10800 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK
;
10801 bp
->port
.link_config
[0] =
10802 SHMEM_RD(bp
, dev_info
.port_feature_config
[port
].link_config
);
10804 bp
->port
.link_config
[1] =
10805 SHMEM_RD(bp
, dev_info
.port_feature_config
[port
].link_config2
);
10807 bp
->link_params
.multi_phy_config
=
10808 SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].multi_phy_config
);
10809 /* If the device is capable of WoL, set the default state according
10812 config
= SHMEM_RD(bp
, dev_info
.port_feature_config
[port
].config
);
10813 bp
->wol
= (!(bp
->flags
& NO_WOL_FLAG
) &&
10814 (config
& PORT_FEATURE_WOL_ENABLED
));
10816 if ((config
& PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK
) ==
10817 PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE
&& !IS_MF(bp
))
10818 bp
->flags
|= NO_ISCSI_FLAG
;
10819 if ((config
& PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK
) ==
10820 PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI
&& !(IS_MF(bp
)))
10821 bp
->flags
|= NO_FCOE_FLAG
;
10823 BNX2X_DEV_INFO("lane_config 0x%08x speed_cap_mask0 0x%08x link_config0 0x%08x\n",
10824 bp
->link_params
.lane_config
,
10825 bp
->link_params
.speed_cap_mask
[0],
10826 bp
->port
.link_config
[0]);
10828 bp
->link_params
.switch_cfg
= (bp
->port
.link_config
[0] &
10829 PORT_FEATURE_CONNECTED_SWITCH_MASK
);
10830 bnx2x_phy_probe(&bp
->link_params
);
10831 bnx2x_link_settings_supported(bp
, bp
->link_params
.switch_cfg
);
10833 bnx2x_link_settings_requested(bp
);
10836 * If connected directly, work with the internal PHY, otherwise, work
10837 * with the external PHY
10841 dev_info
.port_hw_config
[port
].external_phy_config
);
10842 ext_phy_type
= XGXS_EXT_PHY_TYPE(ext_phy_config
);
10843 if (ext_phy_type
== PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT
)
10844 bp
->mdio
.prtad
= bp
->port
.phy_addr
;
10846 else if ((ext_phy_type
!= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE
) &&
10847 (ext_phy_type
!= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN
))
10849 XGXS_EXT_PHY_ADDR(ext_phy_config
);
10851 /* Configure link feature according to nvram value */
10852 eee_mode
= (((SHMEM_RD(bp
, dev_info
.
10853 port_feature_config
[port
].eee_power_mode
)) &
10854 PORT_FEAT_CFG_EEE_POWER_MODE_MASK
) >>
10855 PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT
);
10856 if (eee_mode
!= PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED
) {
10857 bp
->link_params
.eee_mode
= EEE_MODE_ADV_LPI
|
10858 EEE_MODE_ENABLE_LPI
|
10859 EEE_MODE_OUTPUT_TIME
;
10861 bp
->link_params
.eee_mode
= 0;
10865 void bnx2x_get_iscsi_info(struct bnx2x
*bp
)
10867 u32 no_flags
= NO_ISCSI_FLAG
;
10868 int port
= BP_PORT(bp
);
10869 u32 max_iscsi_conn
= FW_ENCODE_32BIT_PATTERN
^ SHMEM_RD(bp
,
10870 drv_lic_key
[port
].max_iscsi_conn
);
10872 if (!CNIC_SUPPORT(bp
)) {
10873 bp
->flags
|= no_flags
;
10877 /* Get the number of maximum allowed iSCSI connections */
10878 bp
->cnic_eth_dev
.max_iscsi_conn
=
10879 (max_iscsi_conn
& BNX2X_MAX_ISCSI_INIT_CONN_MASK
) >>
10880 BNX2X_MAX_ISCSI_INIT_CONN_SHIFT
;
10882 BNX2X_DEV_INFO("max_iscsi_conn 0x%x\n",
10883 bp
->cnic_eth_dev
.max_iscsi_conn
);
10886 * If maximum allowed number of connections is zero -
10887 * disable the feature.
10889 if (!bp
->cnic_eth_dev
.max_iscsi_conn
)
10890 bp
->flags
|= no_flags
;
10893 static void bnx2x_get_ext_wwn_info(struct bnx2x
*bp
, int func
)
10896 bp
->cnic_eth_dev
.fcoe_wwn_port_name_hi
=
10897 MF_CFG_RD(bp
, func_ext_config
[func
].fcoe_wwn_port_name_upper
);
10898 bp
->cnic_eth_dev
.fcoe_wwn_port_name_lo
=
10899 MF_CFG_RD(bp
, func_ext_config
[func
].fcoe_wwn_port_name_lower
);
10902 bp
->cnic_eth_dev
.fcoe_wwn_node_name_hi
=
10903 MF_CFG_RD(bp
, func_ext_config
[func
].fcoe_wwn_node_name_upper
);
10904 bp
->cnic_eth_dev
.fcoe_wwn_node_name_lo
=
10905 MF_CFG_RD(bp
, func_ext_config
[func
].fcoe_wwn_node_name_lower
);
10908 static int bnx2x_shared_fcoe_funcs(struct bnx2x
*bp
)
10915 /* iterate over absolute function ids for this path: */
10916 for (fid
= BP_PATH(bp
); fid
< E2_FUNC_MAX
* 2; fid
+= 2) {
10917 if (IS_MF_SD(bp
)) {
10918 u32 cfg
= MF_CFG_RD(bp
,
10919 func_mf_config
[fid
].config
);
10921 if (!(cfg
& FUNC_MF_CFG_FUNC_HIDE
) &&
10922 ((cfg
& FUNC_MF_CFG_PROTOCOL_MASK
) ==
10923 FUNC_MF_CFG_PROTOCOL_FCOE
))
10926 u32 cfg
= MF_CFG_RD(bp
,
10927 func_ext_config
[fid
].
10930 if ((cfg
& MACP_FUNC_CFG_FLAGS_ENABLED
) &&
10931 (cfg
& MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD
))
10936 int port
, port_cnt
= CHIP_MODE_IS_4_PORT(bp
) ? 2 : 1;
10938 for (port
= 0; port
< port_cnt
; port
++) {
10939 u32 lic
= SHMEM_RD(bp
,
10940 drv_lic_key
[port
].max_fcoe_conn
) ^
10941 FW_ENCODE_32BIT_PATTERN
;
10950 static void bnx2x_get_fcoe_info(struct bnx2x
*bp
)
10952 int port
= BP_PORT(bp
);
10953 int func
= BP_ABS_FUNC(bp
);
10954 u32 max_fcoe_conn
= FW_ENCODE_32BIT_PATTERN
^ SHMEM_RD(bp
,
10955 drv_lic_key
[port
].max_fcoe_conn
);
10956 u8 num_fcoe_func
= bnx2x_shared_fcoe_funcs(bp
);
10958 if (!CNIC_SUPPORT(bp
)) {
10959 bp
->flags
|= NO_FCOE_FLAG
;
10963 /* Get the number of maximum allowed FCoE connections */
10964 bp
->cnic_eth_dev
.max_fcoe_conn
=
10965 (max_fcoe_conn
& BNX2X_MAX_FCOE_INIT_CONN_MASK
) >>
10966 BNX2X_MAX_FCOE_INIT_CONN_SHIFT
;
10968 /* Calculate the number of maximum allowed FCoE tasks */
10969 bp
->cnic_eth_dev
.max_fcoe_exchanges
= MAX_NUM_FCOE_TASKS_PER_ENGINE
;
10971 /* check if FCoE resources must be shared between different functions */
10973 bp
->cnic_eth_dev
.max_fcoe_exchanges
/= num_fcoe_func
;
10975 /* Read the WWN: */
10978 bp
->cnic_eth_dev
.fcoe_wwn_port_name_hi
=
10980 dev_info
.port_hw_config
[port
].
10981 fcoe_wwn_port_name_upper
);
10982 bp
->cnic_eth_dev
.fcoe_wwn_port_name_lo
=
10984 dev_info
.port_hw_config
[port
].
10985 fcoe_wwn_port_name_lower
);
10988 bp
->cnic_eth_dev
.fcoe_wwn_node_name_hi
=
10990 dev_info
.port_hw_config
[port
].
10991 fcoe_wwn_node_name_upper
);
10992 bp
->cnic_eth_dev
.fcoe_wwn_node_name_lo
=
10994 dev_info
.port_hw_config
[port
].
10995 fcoe_wwn_node_name_lower
);
10996 } else if (!IS_MF_SD(bp
)) {
10998 * Read the WWN info only if the FCoE feature is enabled for
11001 if (BNX2X_MF_EXT_PROTOCOL_FCOE(bp
) && !CHIP_IS_E1x(bp
))
11002 bnx2x_get_ext_wwn_info(bp
, func
);
11004 } else if (IS_MF_FCOE_SD(bp
) && !CHIP_IS_E1x(bp
)) {
11005 bnx2x_get_ext_wwn_info(bp
, func
);
11008 BNX2X_DEV_INFO("max_fcoe_conn 0x%x\n", bp
->cnic_eth_dev
.max_fcoe_conn
);
11011 * If maximum allowed number of connections is zero -
11012 * disable the feature.
11014 if (!bp
->cnic_eth_dev
.max_fcoe_conn
)
11015 bp
->flags
|= NO_FCOE_FLAG
;
11018 static void bnx2x_get_cnic_info(struct bnx2x
*bp
)
11021 * iSCSI may be dynamically disabled but reading
11022 * info here we will decrease memory usage by driver
11023 * if the feature is disabled for good
11025 bnx2x_get_iscsi_info(bp
);
11026 bnx2x_get_fcoe_info(bp
);
11029 static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x
*bp
)
11032 int func
= BP_ABS_FUNC(bp
);
11033 int port
= BP_PORT(bp
);
11034 u8
*iscsi_mac
= bp
->cnic_eth_dev
.iscsi_mac
;
11035 u8
*fip_mac
= bp
->fip_mac
;
11038 /* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or
11039 * FCoE MAC then the appropriate feature should be disabled.
11040 * In non SD mode features configuration comes from struct
11043 if (!IS_MF_SD(bp
) && !CHIP_IS_E1x(bp
)) {
11044 u32 cfg
= MF_CFG_RD(bp
, func_ext_config
[func
].func_cfg
);
11045 if (cfg
& MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD
) {
11046 val2
= MF_CFG_RD(bp
, func_ext_config
[func
].
11047 iscsi_mac_addr_upper
);
11048 val
= MF_CFG_RD(bp
, func_ext_config
[func
].
11049 iscsi_mac_addr_lower
);
11050 bnx2x_set_mac_buf(iscsi_mac
, val
, val2
);
11052 ("Read iSCSI MAC: %pM\n", iscsi_mac
);
11054 bp
->flags
|= NO_ISCSI_OOO_FLAG
| NO_ISCSI_FLAG
;
11057 if (cfg
& MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD
) {
11058 val2
= MF_CFG_RD(bp
, func_ext_config
[func
].
11059 fcoe_mac_addr_upper
);
11060 val
= MF_CFG_RD(bp
, func_ext_config
[func
].
11061 fcoe_mac_addr_lower
);
11062 bnx2x_set_mac_buf(fip_mac
, val
, val2
);
11064 ("Read FCoE L2 MAC: %pM\n", fip_mac
);
11066 bp
->flags
|= NO_FCOE_FLAG
;
11069 bp
->mf_ext_config
= cfg
;
11071 } else { /* SD MODE */
11072 if (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp
)) {
11073 /* use primary mac as iscsi mac */
11074 memcpy(iscsi_mac
, bp
->dev
->dev_addr
, ETH_ALEN
);
11076 BNX2X_DEV_INFO("SD ISCSI MODE\n");
11078 ("Read iSCSI MAC: %pM\n", iscsi_mac
);
11079 } else if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp
)) {
11080 /* use primary mac as fip mac */
11081 memcpy(fip_mac
, bp
->dev
->dev_addr
, ETH_ALEN
);
11082 BNX2X_DEV_INFO("SD FCoE MODE\n");
11084 ("Read FIP MAC: %pM\n", fip_mac
);
11088 /* If this is a storage-only interface, use SAN mac as
11089 * primary MAC. Notice that for SD this is already the case,
11090 * as the SAN mac was copied from the primary MAC.
11092 if (IS_MF_FCOE_AFEX(bp
))
11093 memcpy(bp
->dev
->dev_addr
, fip_mac
, ETH_ALEN
);
11095 val2
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].
11097 val
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].
11099 bnx2x_set_mac_buf(iscsi_mac
, val
, val2
);
11101 val2
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].
11102 fcoe_fip_mac_upper
);
11103 val
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].
11104 fcoe_fip_mac_lower
);
11105 bnx2x_set_mac_buf(fip_mac
, val
, val2
);
11108 /* Disable iSCSI OOO if MAC configuration is invalid. */
11109 if (!is_valid_ether_addr(iscsi_mac
)) {
11110 bp
->flags
|= NO_ISCSI_OOO_FLAG
| NO_ISCSI_FLAG
;
11111 memset(iscsi_mac
, 0, ETH_ALEN
);
11114 /* Disable FCoE if MAC configuration is invalid. */
11115 if (!is_valid_ether_addr(fip_mac
)) {
11116 bp
->flags
|= NO_FCOE_FLAG
;
11117 memset(bp
->fip_mac
, 0, ETH_ALEN
);
11121 static void bnx2x_get_mac_hwinfo(struct bnx2x
*bp
)
11124 int func
= BP_ABS_FUNC(bp
);
11125 int port
= BP_PORT(bp
);
11127 /* Zero primary MAC configuration */
11128 memset(bp
->dev
->dev_addr
, 0, ETH_ALEN
);
11130 if (BP_NOMCP(bp
)) {
11131 BNX2X_ERROR("warning: random MAC workaround active\n");
11132 eth_hw_addr_random(bp
->dev
);
11133 } else if (IS_MF(bp
)) {
11134 val2
= MF_CFG_RD(bp
, func_mf_config
[func
].mac_upper
);
11135 val
= MF_CFG_RD(bp
, func_mf_config
[func
].mac_lower
);
11136 if ((val2
!= FUNC_MF_CFG_UPPERMAC_DEFAULT
) &&
11137 (val
!= FUNC_MF_CFG_LOWERMAC_DEFAULT
))
11138 bnx2x_set_mac_buf(bp
->dev
->dev_addr
, val
, val2
);
11140 if (CNIC_SUPPORT(bp
))
11141 bnx2x_get_cnic_mac_hwinfo(bp
);
11143 /* in SF read MACs from port configuration */
11144 val2
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].mac_upper
);
11145 val
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].mac_lower
);
11146 bnx2x_set_mac_buf(bp
->dev
->dev_addr
, val
, val2
);
11148 if (CNIC_SUPPORT(bp
))
11149 bnx2x_get_cnic_mac_hwinfo(bp
);
11152 memcpy(bp
->link_params
.mac_addr
, bp
->dev
->dev_addr
, ETH_ALEN
);
11154 if (!bnx2x_is_valid_ether_addr(bp
, bp
->dev
->dev_addr
))
11155 dev_err(&bp
->pdev
->dev
,
11156 "bad Ethernet MAC address configuration: %pM\n"
11157 "change it manually before bringing up the appropriate network interface\n",
11158 bp
->dev
->dev_addr
);
11161 static bool bnx2x_get_dropless_info(struct bnx2x
*bp
)
11169 if (IS_MF(bp
) && !CHIP_IS_E1x(bp
)) {
11170 /* Take function: tmp = func */
11171 tmp
= BP_ABS_FUNC(bp
);
11172 cfg
= MF_CFG_RD(bp
, func_ext_config
[tmp
].func_cfg
);
11173 cfg
= !!(cfg
& MACP_FUNC_CFG_PAUSE_ON_HOST_RING
);
11175 /* Take port: tmp = port */
11178 dev_info
.port_hw_config
[tmp
].generic_features
);
11179 cfg
= !!(cfg
& PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED
);
11184 static int bnx2x_get_hwinfo(struct bnx2x
*bp
)
11186 int /*abs*/func
= BP_ABS_FUNC(bp
);
11191 bnx2x_get_common_hwinfo(bp
);
11194 * initialize IGU parameters
11196 if (CHIP_IS_E1x(bp
)) {
11197 bp
->common
.int_block
= INT_BLOCK_HC
;
11199 bp
->igu_dsb_id
= DEF_SB_IGU_ID
;
11200 bp
->igu_base_sb
= 0;
11202 bp
->common
.int_block
= INT_BLOCK_IGU
;
11204 /* do not allow device reset during IGU info processing */
11205 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RESET
);
11207 val
= REG_RD(bp
, IGU_REG_BLOCK_CONFIGURATION
);
11209 if (val
& IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN
) {
11212 BNX2X_DEV_INFO("FORCING Normal Mode\n");
11214 val
&= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN
);
11215 REG_WR(bp
, IGU_REG_BLOCK_CONFIGURATION
, val
);
11216 REG_WR(bp
, IGU_REG_RESET_MEMORIES
, 0x7f);
11218 while (tout
&& REG_RD(bp
, IGU_REG_RESET_MEMORIES
)) {
11220 usleep_range(1000, 2000);
11223 if (REG_RD(bp
, IGU_REG_RESET_MEMORIES
)) {
11224 dev_err(&bp
->pdev
->dev
,
11225 "FORCING Normal Mode failed!!!\n");
11226 bnx2x_release_hw_lock(bp
,
11227 HW_LOCK_RESOURCE_RESET
);
11232 if (val
& IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN
) {
11233 BNX2X_DEV_INFO("IGU Backward Compatible Mode\n");
11234 bp
->common
.int_block
|= INT_BLOCK_MODE_BW_COMP
;
11236 BNX2X_DEV_INFO("IGU Normal Mode\n");
11238 rc
= bnx2x_get_igu_cam_info(bp
);
11239 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RESET
);
11245 * set base FW non-default (fast path) status block id, this value is
11246 * used to initialize the fw_sb_id saved on the fp/queue structure to
11247 * determine the id used by the FW.
11249 if (CHIP_IS_E1x(bp
))
11250 bp
->base_fw_ndsb
= BP_PORT(bp
) * FP_SB_MAX_E1x
+ BP_L_ID(bp
);
11252 * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of
11253 * the same queue are indicated on the same IGU SB). So we prefer
11254 * FW and IGU SBs to be the same value.
11256 bp
->base_fw_ndsb
= bp
->igu_base_sb
;
11258 BNX2X_DEV_INFO("igu_dsb_id %d igu_base_sb %d igu_sb_cnt %d\n"
11259 "base_fw_ndsb %d\n", bp
->igu_dsb_id
, bp
->igu_base_sb
,
11260 bp
->igu_sb_cnt
, bp
->base_fw_ndsb
);
11263 * Initialize MF configuration
11270 if (!CHIP_IS_E1(bp
) && !BP_NOMCP(bp
)) {
11271 BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
11272 bp
->common
.shmem2_base
, SHMEM2_RD(bp
, size
),
11273 (u32
)offsetof(struct shmem2_region
, mf_cfg_addr
));
11275 if (SHMEM2_HAS(bp
, mf_cfg_addr
))
11276 bp
->common
.mf_cfg_base
= SHMEM2_RD(bp
, mf_cfg_addr
);
11278 bp
->common
.mf_cfg_base
= bp
->common
.shmem_base
+
11279 offsetof(struct shmem_region
, func_mb
) +
11280 E1H_FUNC_MAX
* sizeof(struct drv_func_mb
);
11282 * get mf configuration:
11283 * 1. Existence of MF configuration
11284 * 2. MAC address must be legal (check only upper bytes)
11285 * for Switch-Independent mode;
11286 * OVLAN must be legal for Switch-Dependent mode
11287 * 3. SF_MODE configures specific MF mode
11289 if (bp
->common
.mf_cfg_base
!= SHMEM_MF_CFG_ADDR_NONE
) {
11290 /* get mf configuration */
11292 dev_info
.shared_feature_config
.config
);
11293 val
&= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK
;
11296 case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT
:
11297 val
= MF_CFG_RD(bp
, func_mf_config
[func
].
11299 /* check for legal mac (upper bytes)*/
11300 if (val
!= 0xffff) {
11301 bp
->mf_mode
= MULTI_FUNCTION_SI
;
11302 bp
->mf_config
[vn
] = MF_CFG_RD(bp
,
11303 func_mf_config
[func
].config
);
11305 BNX2X_DEV_INFO("illegal MAC address for SI\n");
11307 case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE
:
11308 if ((!CHIP_IS_E1x(bp
)) &&
11309 (MF_CFG_RD(bp
, func_mf_config
[func
].
11310 mac_upper
) != 0xffff) &&
11312 afex_driver_support
))) {
11313 bp
->mf_mode
= MULTI_FUNCTION_AFEX
;
11314 bp
->mf_config
[vn
] = MF_CFG_RD(bp
,
11315 func_mf_config
[func
].config
);
11317 BNX2X_DEV_INFO("can not configure afex mode\n");
11320 case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED
:
11321 /* get OV configuration */
11322 val
= MF_CFG_RD(bp
,
11323 func_mf_config
[FUNC_0
].e1hov_tag
);
11324 val
&= FUNC_MF_CFG_E1HOV_TAG_MASK
;
11326 if (val
!= FUNC_MF_CFG_E1HOV_TAG_DEFAULT
) {
11327 bp
->mf_mode
= MULTI_FUNCTION_SD
;
11328 bp
->mf_config
[vn
] = MF_CFG_RD(bp
,
11329 func_mf_config
[func
].config
);
11331 BNX2X_DEV_INFO("illegal OV for SD\n");
11333 case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF
:
11334 bp
->mf_config
[vn
] = 0;
11337 /* Unknown configuration: reset mf_config */
11338 bp
->mf_config
[vn
] = 0;
11339 BNX2X_DEV_INFO("unknown MF mode 0x%x\n", val
);
11343 BNX2X_DEV_INFO("%s function mode\n",
11344 IS_MF(bp
) ? "multi" : "single");
11346 switch (bp
->mf_mode
) {
11347 case MULTI_FUNCTION_SD
:
11348 val
= MF_CFG_RD(bp
, func_mf_config
[func
].e1hov_tag
) &
11349 FUNC_MF_CFG_E1HOV_TAG_MASK
;
11350 if (val
!= FUNC_MF_CFG_E1HOV_TAG_DEFAULT
) {
11352 bp
->path_has_ovlan
= true;
11354 BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n",
11355 func
, bp
->mf_ov
, bp
->mf_ov
);
11357 dev_err(&bp
->pdev
->dev
,
11358 "No valid MF OV for func %d, aborting\n",
11363 case MULTI_FUNCTION_AFEX
:
11364 BNX2X_DEV_INFO("func %d is in MF afex mode\n", func
);
11366 case MULTI_FUNCTION_SI
:
11367 BNX2X_DEV_INFO("func %d is in MF switch-independent mode\n",
11372 dev_err(&bp
->pdev
->dev
,
11373 "VN %d is in a single function mode, aborting\n",
11380 /* check if other port on the path needs ovlan:
11381 * Since MF configuration is shared between ports
11382 * Possible mixed modes are only
11383 * {SF, SI} {SF, SD} {SD, SF} {SI, SF}
11385 if (CHIP_MODE_IS_4_PORT(bp
) &&
11386 !bp
->path_has_ovlan
&&
11388 bp
->common
.mf_cfg_base
!= SHMEM_MF_CFG_ADDR_NONE
) {
11389 u8 other_port
= !BP_PORT(bp
);
11390 u8 other_func
= BP_PATH(bp
) + 2*other_port
;
11391 val
= MF_CFG_RD(bp
,
11392 func_mf_config
[other_func
].e1hov_tag
);
11393 if (val
!= FUNC_MF_CFG_E1HOV_TAG_DEFAULT
)
11394 bp
->path_has_ovlan
= true;
11398 /* adjust igu_sb_cnt to MF for E1x */
11399 if (CHIP_IS_E1x(bp
) && IS_MF(bp
))
11400 bp
->igu_sb_cnt
/= E1HVN_MAX
;
11403 bnx2x_get_port_hwinfo(bp
);
11405 /* Get MAC addresses */
11406 bnx2x_get_mac_hwinfo(bp
);
11408 bnx2x_get_cnic_info(bp
);
11413 static void bnx2x_read_fwinfo(struct bnx2x
*bp
)
11415 int cnt
, i
, block_end
, rodi
;
11416 char vpd_start
[BNX2X_VPD_LEN
+1];
11417 char str_id_reg
[VENDOR_ID_LEN
+1];
11418 char str_id_cap
[VENDOR_ID_LEN
+1];
11420 char *vpd_extended_data
= NULL
;
11423 cnt
= pci_read_vpd(bp
->pdev
, 0, BNX2X_VPD_LEN
, vpd_start
);
11424 memset(bp
->fw_ver
, 0, sizeof(bp
->fw_ver
));
11426 if (cnt
< BNX2X_VPD_LEN
)
11427 goto out_not_found
;
11429 /* VPD RO tag should be first tag after identifier string, hence
11430 * we should be able to find it in first BNX2X_VPD_LEN chars
11432 i
= pci_vpd_find_tag(vpd_start
, 0, BNX2X_VPD_LEN
,
11433 PCI_VPD_LRDT_RO_DATA
);
11435 goto out_not_found
;
11437 block_end
= i
+ PCI_VPD_LRDT_TAG_SIZE
+
11438 pci_vpd_lrdt_size(&vpd_start
[i
]);
11440 i
+= PCI_VPD_LRDT_TAG_SIZE
;
11442 if (block_end
> BNX2X_VPD_LEN
) {
11443 vpd_extended_data
= kmalloc(block_end
, GFP_KERNEL
);
11444 if (vpd_extended_data
== NULL
)
11445 goto out_not_found
;
11447 /* read rest of vpd image into vpd_extended_data */
11448 memcpy(vpd_extended_data
, vpd_start
, BNX2X_VPD_LEN
);
11449 cnt
= pci_read_vpd(bp
->pdev
, BNX2X_VPD_LEN
,
11450 block_end
- BNX2X_VPD_LEN
,
11451 vpd_extended_data
+ BNX2X_VPD_LEN
);
11452 if (cnt
< (block_end
- BNX2X_VPD_LEN
))
11453 goto out_not_found
;
11454 vpd_data
= vpd_extended_data
;
11456 vpd_data
= vpd_start
;
11458 /* now vpd_data holds full vpd content in both cases */
11460 rodi
= pci_vpd_find_info_keyword(vpd_data
, i
, block_end
,
11461 PCI_VPD_RO_KEYWORD_MFR_ID
);
11463 goto out_not_found
;
11465 len
= pci_vpd_info_field_size(&vpd_data
[rodi
]);
11467 if (len
!= VENDOR_ID_LEN
)
11468 goto out_not_found
;
11470 rodi
+= PCI_VPD_INFO_FLD_HDR_SIZE
;
11472 /* vendor specific info */
11473 snprintf(str_id_reg
, VENDOR_ID_LEN
+ 1, "%04x", PCI_VENDOR_ID_DELL
);
11474 snprintf(str_id_cap
, VENDOR_ID_LEN
+ 1, "%04X", PCI_VENDOR_ID_DELL
);
11475 if (!strncmp(str_id_reg
, &vpd_data
[rodi
], VENDOR_ID_LEN
) ||
11476 !strncmp(str_id_cap
, &vpd_data
[rodi
], VENDOR_ID_LEN
)) {
11478 rodi
= pci_vpd_find_info_keyword(vpd_data
, i
, block_end
,
11479 PCI_VPD_RO_KEYWORD_VENDOR0
);
11481 len
= pci_vpd_info_field_size(&vpd_data
[rodi
]);
11483 rodi
+= PCI_VPD_INFO_FLD_HDR_SIZE
;
11485 if (len
< 32 && (len
+ rodi
) <= BNX2X_VPD_LEN
) {
11486 memcpy(bp
->fw_ver
, &vpd_data
[rodi
], len
);
11487 bp
->fw_ver
[len
] = ' ';
11490 kfree(vpd_extended_data
);
11494 kfree(vpd_extended_data
);
11498 static void bnx2x_set_modes_bitmap(struct bnx2x
*bp
)
11502 if (CHIP_REV_IS_FPGA(bp
))
11503 SET_FLAGS(flags
, MODE_FPGA
);
11504 else if (CHIP_REV_IS_EMUL(bp
))
11505 SET_FLAGS(flags
, MODE_EMUL
);
11507 SET_FLAGS(flags
, MODE_ASIC
);
11509 if (CHIP_MODE_IS_4_PORT(bp
))
11510 SET_FLAGS(flags
, MODE_PORT4
);
11512 SET_FLAGS(flags
, MODE_PORT2
);
11514 if (CHIP_IS_E2(bp
))
11515 SET_FLAGS(flags
, MODE_E2
);
11516 else if (CHIP_IS_E3(bp
)) {
11517 SET_FLAGS(flags
, MODE_E3
);
11518 if (CHIP_REV(bp
) == CHIP_REV_Ax
)
11519 SET_FLAGS(flags
, MODE_E3_A0
);
11520 else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/
11521 SET_FLAGS(flags
, MODE_E3_B0
| MODE_COS3
);
11525 SET_FLAGS(flags
, MODE_MF
);
11526 switch (bp
->mf_mode
) {
11527 case MULTI_FUNCTION_SD
:
11528 SET_FLAGS(flags
, MODE_MF_SD
);
11530 case MULTI_FUNCTION_SI
:
11531 SET_FLAGS(flags
, MODE_MF_SI
);
11533 case MULTI_FUNCTION_AFEX
:
11534 SET_FLAGS(flags
, MODE_MF_AFEX
);
11538 SET_FLAGS(flags
, MODE_SF
);
11540 #if defined(__LITTLE_ENDIAN)
11541 SET_FLAGS(flags
, MODE_LITTLE_ENDIAN
);
11542 #else /*(__BIG_ENDIAN)*/
11543 SET_FLAGS(flags
, MODE_BIG_ENDIAN
);
11545 INIT_MODE_FLAGS(bp
) = flags
;
11548 static int bnx2x_init_bp(struct bnx2x
*bp
)
11553 mutex_init(&bp
->port
.phy_mutex
);
11554 mutex_init(&bp
->fw_mb_mutex
);
11555 spin_lock_init(&bp
->stats_lock
);
11556 sema_init(&bp
->stats_sema
, 1);
11558 INIT_DELAYED_WORK(&bp
->sp_task
, bnx2x_sp_task
);
11559 INIT_DELAYED_WORK(&bp
->sp_rtnl_task
, bnx2x_sp_rtnl_task
);
11560 INIT_DELAYED_WORK(&bp
->period_task
, bnx2x_period_task
);
11562 rc
= bnx2x_get_hwinfo(bp
);
11566 eth_zero_addr(bp
->dev
->dev_addr
);
11569 bnx2x_set_modes_bitmap(bp
);
11571 rc
= bnx2x_alloc_mem_bp(bp
);
11575 bnx2x_read_fwinfo(bp
);
11577 func
= BP_FUNC(bp
);
11579 /* need to reset chip if undi was active */
11580 if (IS_PF(bp
) && !BP_NOMCP(bp
)) {
11583 SHMEM_RD(bp
, func_mb
[BP_FW_MB_IDX(bp
)].drv_mb_header
) &
11584 DRV_MSG_SEQ_NUMBER_MASK
;
11585 BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp
->fw_seq
);
11587 bnx2x_prev_unload(bp
);
11590 if (CHIP_REV_IS_FPGA(bp
))
11591 dev_err(&bp
->pdev
->dev
, "FPGA detected\n");
11593 if (BP_NOMCP(bp
) && (func
== 0))
11594 dev_err(&bp
->pdev
->dev
, "MCP disabled, must load devices in order!\n");
11596 bp
->disable_tpa
= disable_tpa
;
11597 bp
->disable_tpa
|= IS_MF_STORAGE_SD(bp
) || IS_MF_FCOE_AFEX(bp
);
11599 /* Set TPA flags */
11600 if (bp
->disable_tpa
) {
11601 bp
->flags
&= ~(TPA_ENABLE_FLAG
| GRO_ENABLE_FLAG
);
11602 bp
->dev
->features
&= ~NETIF_F_LRO
;
11604 bp
->flags
|= (TPA_ENABLE_FLAG
| GRO_ENABLE_FLAG
);
11605 bp
->dev
->features
|= NETIF_F_LRO
;
11608 if (CHIP_IS_E1(bp
))
11609 bp
->dropless_fc
= 0;
11611 bp
->dropless_fc
= dropless_fc
| bnx2x_get_dropless_info(bp
);
11615 bp
->tx_ring_size
= IS_MF_FCOE_AFEX(bp
) ? 0 : MAX_TX_AVAIL
;
11617 bp
->rx_ring_size
= MAX_RX_AVAIL
;
11619 /* make sure that the numbers are in the right granularity */
11620 bp
->tx_ticks
= (50 / BNX2X_BTR
) * BNX2X_BTR
;
11621 bp
->rx_ticks
= (25 / BNX2X_BTR
) * BNX2X_BTR
;
11623 bp
->current_interval
= CHIP_REV_IS_SLOW(bp
) ? 5*HZ
: HZ
;
11625 init_timer(&bp
->timer
);
11626 bp
->timer
.expires
= jiffies
+ bp
->current_interval
;
11627 bp
->timer
.data
= (unsigned long) bp
;
11628 bp
->timer
.function
= bnx2x_timer
;
11630 if (SHMEM2_HAS(bp
, dcbx_lldp_params_offset
) &&
11631 SHMEM2_HAS(bp
, dcbx_lldp_dcbx_stat_offset
) &&
11632 SHMEM2_RD(bp
, dcbx_lldp_params_offset
) &&
11633 SHMEM2_RD(bp
, dcbx_lldp_dcbx_stat_offset
)) {
11634 bnx2x_dcbx_set_state(bp
, true, BNX2X_DCBX_ENABLED_ON_NEG_ON
);
11635 bnx2x_dcbx_init_params(bp
);
11637 bnx2x_dcbx_set_state(bp
, false, BNX2X_DCBX_ENABLED_OFF
);
11640 if (CHIP_IS_E1x(bp
))
11641 bp
->cnic_base_cl_id
= FP_SB_MAX_E1x
;
11643 bp
->cnic_base_cl_id
= FP_SB_MAX_E2
;
11645 /* multiple tx priority */
11648 else if (CHIP_IS_E1x(bp
))
11649 bp
->max_cos
= BNX2X_MULTI_TX_COS_E1X
;
11650 else if (CHIP_IS_E2(bp
) || CHIP_IS_E3A0(bp
))
11651 bp
->max_cos
= BNX2X_MULTI_TX_COS_E2_E3A0
;
11652 else if (CHIP_IS_E3B0(bp
))
11653 bp
->max_cos
= BNX2X_MULTI_TX_COS_E3B0
;
11655 BNX2X_ERR("unknown chip %x revision %x\n",
11656 CHIP_NUM(bp
), CHIP_REV(bp
));
11657 BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp
->max_cos
);
11659 /* We need at least one default status block for slow-path events,
11660 * second status block for the L2 queue, and a third status block for
11661 * CNIC if supported.
11663 if (CNIC_SUPPORT(bp
))
11664 bp
->min_msix_vec_cnt
= 3;
11666 bp
->min_msix_vec_cnt
= 2;
11667 BNX2X_DEV_INFO("bp->min_msix_vec_cnt %d", bp
->min_msix_vec_cnt
);
11669 bp
->dump_preset_idx
= 1;
11674 /****************************************************************************
11675 * General service functions
11676 ****************************************************************************/
11679 * net_device service functions
11682 /* called with rtnl_lock */
11683 static int bnx2x_open(struct net_device
*dev
)
11685 struct bnx2x
*bp
= netdev_priv(dev
);
11686 bool global
= false;
11687 int other_engine
= BP_PATH(bp
) ? 0 : 1;
11688 bool other_load_status
, load_status
;
11691 bp
->stats_init
= true;
11693 netif_carrier_off(dev
);
11695 bnx2x_set_power_state(bp
, PCI_D0
);
11697 /* If parity had happen during the unload, then attentions
11698 * and/or RECOVERY_IN_PROGRES may still be set. In this case we
11699 * want the first function loaded on the current engine to
11700 * complete the recovery.
11701 * Parity recovery is only relevant for PF driver.
11704 other_load_status
= bnx2x_get_load_status(bp
, other_engine
);
11705 load_status
= bnx2x_get_load_status(bp
, BP_PATH(bp
));
11706 if (!bnx2x_reset_is_done(bp
, BP_PATH(bp
)) ||
11707 bnx2x_chk_parity_attn(bp
, &global
, true)) {
11709 /* If there are attentions and they are in a
11710 * global blocks, set the GLOBAL_RESET bit
11711 * regardless whether it will be this function
11712 * that will complete the recovery or not.
11715 bnx2x_set_reset_global(bp
);
11717 /* Only the first function on the current
11718 * engine should try to recover in open. In case
11719 * of attentions in global blocks only the first
11720 * in the chip should try to recover.
11722 if ((!load_status
&&
11723 (!global
|| !other_load_status
)) &&
11724 bnx2x_trylock_leader_lock(bp
) &&
11725 !bnx2x_leader_reset(bp
)) {
11726 netdev_info(bp
->dev
,
11727 "Recovered in open\n");
11731 /* recovery has failed... */
11732 bnx2x_set_power_state(bp
, PCI_D3hot
);
11733 bp
->recovery_state
= BNX2X_RECOVERY_FAILED
;
11735 BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n"
11736 "If you still see this message after a few retries then power cycle is required.\n");
11743 bp
->recovery_state
= BNX2X_RECOVERY_DONE
;
11744 rc
= bnx2x_nic_load(bp
, LOAD_OPEN
);
11747 return bnx2x_open_epilog(bp
);
11750 /* called with rtnl_lock */
11751 static int bnx2x_close(struct net_device
*dev
)
11753 struct bnx2x
*bp
= netdev_priv(dev
);
11755 /* Unload the driver, release IRQs */
11756 bnx2x_nic_unload(bp
, UNLOAD_CLOSE
, false);
11761 static int bnx2x_init_mcast_macs_list(struct bnx2x
*bp
,
11762 struct bnx2x_mcast_ramrod_params
*p
)
11764 int mc_count
= netdev_mc_count(bp
->dev
);
11765 struct bnx2x_mcast_list_elem
*mc_mac
=
11766 kzalloc(sizeof(*mc_mac
) * mc_count
, GFP_ATOMIC
);
11767 struct netdev_hw_addr
*ha
;
11772 INIT_LIST_HEAD(&p
->mcast_list
);
11774 netdev_for_each_mc_addr(ha
, bp
->dev
) {
11775 mc_mac
->mac
= bnx2x_mc_addr(ha
);
11776 list_add_tail(&mc_mac
->link
, &p
->mcast_list
);
11780 p
->mcast_list_len
= mc_count
;
11785 static void bnx2x_free_mcast_macs_list(
11786 struct bnx2x_mcast_ramrod_params
*p
)
11788 struct bnx2x_mcast_list_elem
*mc_mac
=
11789 list_first_entry(&p
->mcast_list
, struct bnx2x_mcast_list_elem
,
11797 * bnx2x_set_uc_list - configure a new unicast MACs list.
11799 * @bp: driver handle
11801 * We will use zero (0) as a MAC type for these MACs.
11803 static int bnx2x_set_uc_list(struct bnx2x
*bp
)
11806 struct net_device
*dev
= bp
->dev
;
11807 struct netdev_hw_addr
*ha
;
11808 struct bnx2x_vlan_mac_obj
*mac_obj
= &bp
->sp_objs
->mac_obj
;
11809 unsigned long ramrod_flags
= 0;
11811 /* First schedule a cleanup up of old configuration */
11812 rc
= bnx2x_del_all_macs(bp
, mac_obj
, BNX2X_UC_LIST_MAC
, false);
11814 BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc
);
11818 netdev_for_each_uc_addr(ha
, dev
) {
11819 rc
= bnx2x_set_mac_one(bp
, bnx2x_uc_addr(ha
), mac_obj
, true,
11820 BNX2X_UC_LIST_MAC
, &ramrod_flags
);
11821 if (rc
== -EEXIST
) {
11823 "Failed to schedule ADD operations: %d\n", rc
);
11824 /* do not treat adding same MAC as error */
11827 } else if (rc
< 0) {
11829 BNX2X_ERR("Failed to schedule ADD operations: %d\n",
11835 /* Execute the pending commands */
11836 __set_bit(RAMROD_CONT
, &ramrod_flags
);
11837 return bnx2x_set_mac_one(bp
, NULL
, mac_obj
, false /* don't care */,
11838 BNX2X_UC_LIST_MAC
, &ramrod_flags
);
11841 static int bnx2x_set_mc_list(struct bnx2x
*bp
)
11843 struct net_device
*dev
= bp
->dev
;
11844 struct bnx2x_mcast_ramrod_params rparam
= {NULL
};
11847 rparam
.mcast_obj
= &bp
->mcast_obj
;
11849 /* first, clear all configured multicast MACs */
11850 rc
= bnx2x_config_mcast(bp
, &rparam
, BNX2X_MCAST_CMD_DEL
);
11852 BNX2X_ERR("Failed to clear multicast configuration: %d\n", rc
);
11856 /* then, configure a new MACs list */
11857 if (netdev_mc_count(dev
)) {
11858 rc
= bnx2x_init_mcast_macs_list(bp
, &rparam
);
11860 BNX2X_ERR("Failed to create multicast MACs list: %d\n",
11865 /* Now add the new MACs */
11866 rc
= bnx2x_config_mcast(bp
, &rparam
,
11867 BNX2X_MCAST_CMD_ADD
);
11869 BNX2X_ERR("Failed to set a new multicast configuration: %d\n",
11872 bnx2x_free_mcast_macs_list(&rparam
);
11878 /* If bp->state is OPEN, should be called with netif_addr_lock_bh() */
11879 void bnx2x_set_rx_mode(struct net_device
*dev
)
11881 struct bnx2x
*bp
= netdev_priv(dev
);
11882 u32 rx_mode
= BNX2X_RX_MODE_NORMAL
;
11884 if (bp
->state
!= BNX2X_STATE_OPEN
) {
11885 DP(NETIF_MSG_IFUP
, "state is %x, returning\n", bp
->state
);
11889 DP(NETIF_MSG_IFUP
, "dev->flags = %x\n", bp
->dev
->flags
);
11891 if (dev
->flags
& IFF_PROMISC
)
11892 rx_mode
= BNX2X_RX_MODE_PROMISC
;
11893 else if ((dev
->flags
& IFF_ALLMULTI
) ||
11894 ((netdev_mc_count(dev
) > BNX2X_MAX_MULTICAST
) &&
11896 rx_mode
= BNX2X_RX_MODE_ALLMULTI
;
11899 /* some multicasts */
11900 if (bnx2x_set_mc_list(bp
) < 0)
11901 rx_mode
= BNX2X_RX_MODE_ALLMULTI
;
11903 if (bnx2x_set_uc_list(bp
) < 0)
11904 rx_mode
= BNX2X_RX_MODE_PROMISC
;
11906 /* configuring mcast to a vf involves sleeping (when we
11907 * wait for the pf's response). Since this function is
11908 * called from non sleepable context we must schedule
11909 * a work item for this purpose
11911 smp_mb__before_clear_bit();
11912 set_bit(BNX2X_SP_RTNL_VFPF_MCAST
,
11913 &bp
->sp_rtnl_state
);
11914 smp_mb__after_clear_bit();
11915 schedule_delayed_work(&bp
->sp_rtnl_task
, 0);
11919 bp
->rx_mode
= rx_mode
;
11920 /* handle ISCSI SD mode */
11921 if (IS_MF_ISCSI_SD(bp
))
11922 bp
->rx_mode
= BNX2X_RX_MODE_NONE
;
11924 /* Schedule the rx_mode command */
11925 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
)) {
11926 set_bit(BNX2X_FILTER_RX_MODE_SCHED
, &bp
->sp_state
);
11931 bnx2x_set_storm_rx_mode(bp
);
11933 /* configuring rx mode to storms in a vf involves sleeping (when
11934 * we wait for the pf's response). Since this function is
11935 * called from non sleepable context we must schedule
11936 * a work item for this purpose
11938 smp_mb__before_clear_bit();
11939 set_bit(BNX2X_SP_RTNL_VFPF_STORM_RX_MODE
,
11940 &bp
->sp_rtnl_state
);
11941 smp_mb__after_clear_bit();
11942 schedule_delayed_work(&bp
->sp_rtnl_task
, 0);
11946 /* called with rtnl_lock */
11947 static int bnx2x_mdio_read(struct net_device
*netdev
, int prtad
,
11948 int devad
, u16 addr
)
11950 struct bnx2x
*bp
= netdev_priv(netdev
);
11954 DP(NETIF_MSG_LINK
, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",
11955 prtad
, devad
, addr
);
11957 /* The HW expects different devad if CL22 is used */
11958 devad
= (devad
== MDIO_DEVAD_NONE
) ? DEFAULT_PHY_DEV_ADDR
: devad
;
11960 bnx2x_acquire_phy_lock(bp
);
11961 rc
= bnx2x_phy_read(&bp
->link_params
, prtad
, devad
, addr
, &value
);
11962 bnx2x_release_phy_lock(bp
);
11963 DP(NETIF_MSG_LINK
, "mdio_read_val 0x%x rc = 0x%x\n", value
, rc
);
11970 /* called with rtnl_lock */
11971 static int bnx2x_mdio_write(struct net_device
*netdev
, int prtad
, int devad
,
11972 u16 addr
, u16 value
)
11974 struct bnx2x
*bp
= netdev_priv(netdev
);
11978 "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x, value 0x%x\n",
11979 prtad
, devad
, addr
, value
);
11981 /* The HW expects different devad if CL22 is used */
11982 devad
= (devad
== MDIO_DEVAD_NONE
) ? DEFAULT_PHY_DEV_ADDR
: devad
;
11984 bnx2x_acquire_phy_lock(bp
);
11985 rc
= bnx2x_phy_write(&bp
->link_params
, prtad
, devad
, addr
, value
);
11986 bnx2x_release_phy_lock(bp
);
11990 /* called with rtnl_lock */
11991 static int bnx2x_ioctl(struct net_device
*dev
, struct ifreq
*ifr
, int cmd
)
11993 struct bnx2x
*bp
= netdev_priv(dev
);
11994 struct mii_ioctl_data
*mdio
= if_mii(ifr
);
11996 DP(NETIF_MSG_LINK
, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n",
11997 mdio
->phy_id
, mdio
->reg_num
, mdio
->val_in
);
11999 if (!netif_running(dev
))
12002 return mdio_mii_ioctl(&bp
->mdio
, mdio
, cmd
);
12005 #ifdef CONFIG_NET_POLL_CONTROLLER
12006 static void poll_bnx2x(struct net_device
*dev
)
12008 struct bnx2x
*bp
= netdev_priv(dev
);
12011 for_each_eth_queue(bp
, i
) {
12012 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
12013 napi_schedule(&bnx2x_fp(bp
, fp
->index
, napi
));
12018 static int bnx2x_validate_addr(struct net_device
*dev
)
12020 struct bnx2x
*bp
= netdev_priv(dev
);
12022 /* query the bulletin board for mac address configured by the PF */
12024 bnx2x_sample_bulletin(bp
);
12026 if (!bnx2x_is_valid_ether_addr(bp
, dev
->dev_addr
)) {
12027 BNX2X_ERR("Non-valid Ethernet address\n");
12028 return -EADDRNOTAVAIL
;
12033 static const struct net_device_ops bnx2x_netdev_ops
= {
12034 .ndo_open
= bnx2x_open
,
12035 .ndo_stop
= bnx2x_close
,
12036 .ndo_start_xmit
= bnx2x_start_xmit
,
12037 .ndo_select_queue
= bnx2x_select_queue
,
12038 .ndo_set_rx_mode
= bnx2x_set_rx_mode
,
12039 .ndo_set_mac_address
= bnx2x_change_mac_addr
,
12040 .ndo_validate_addr
= bnx2x_validate_addr
,
12041 .ndo_do_ioctl
= bnx2x_ioctl
,
12042 .ndo_change_mtu
= bnx2x_change_mtu
,
12043 .ndo_fix_features
= bnx2x_fix_features
,
12044 .ndo_set_features
= bnx2x_set_features
,
12045 .ndo_tx_timeout
= bnx2x_tx_timeout
,
12046 #ifdef CONFIG_NET_POLL_CONTROLLER
12047 .ndo_poll_controller
= poll_bnx2x
,
12049 .ndo_setup_tc
= bnx2x_setup_tc
,
12050 #ifdef CONFIG_BNX2X_SRIOV
12051 .ndo_set_vf_mac
= bnx2x_set_vf_mac
,
12052 .ndo_set_vf_vlan
= bnx2x_set_vf_vlan
,
12053 .ndo_get_vf_config
= bnx2x_get_vf_config
,
12055 #ifdef NETDEV_FCOE_WWNN
12056 .ndo_fcoe_get_wwn
= bnx2x_fcoe_get_wwn
,
12059 #ifdef CONFIG_NET_RX_BUSY_POLL
12060 .ndo_busy_poll
= bnx2x_low_latency_recv
,
12064 static int bnx2x_set_coherency_mask(struct bnx2x
*bp
)
12066 struct device
*dev
= &bp
->pdev
->dev
;
12068 if (dma_set_mask(dev
, DMA_BIT_MASK(64)) == 0) {
12069 bp
->flags
|= USING_DAC_FLAG
;
12070 if (dma_set_coherent_mask(dev
, DMA_BIT_MASK(64)) != 0) {
12071 dev_err(dev
, "dma_set_coherent_mask failed, aborting\n");
12074 } else if (dma_set_mask(dev
, DMA_BIT_MASK(32)) != 0) {
12075 dev_err(dev
, "System does not support DMA, aborting\n");
12082 static int bnx2x_init_dev(struct bnx2x
*bp
, struct pci_dev
*pdev
,
12083 struct net_device
*dev
, unsigned long board_type
)
12087 bool chip_is_e1x
= (board_type
== BCM57710
||
12088 board_type
== BCM57711
||
12089 board_type
== BCM57711E
);
12091 SET_NETDEV_DEV(dev
, &pdev
->dev
);
12096 rc
= pci_enable_device(pdev
);
12098 dev_err(&bp
->pdev
->dev
,
12099 "Cannot enable PCI device, aborting\n");
12103 if (!(pci_resource_flags(pdev
, 0) & IORESOURCE_MEM
)) {
12104 dev_err(&bp
->pdev
->dev
,
12105 "Cannot find PCI device base address, aborting\n");
12107 goto err_out_disable
;
12110 if (IS_PF(bp
) && !(pci_resource_flags(pdev
, 2) & IORESOURCE_MEM
)) {
12111 dev_err(&bp
->pdev
->dev
, "Cannot find second PCI device base address, aborting\n");
12113 goto err_out_disable
;
12116 pci_read_config_dword(pdev
, PCICFG_REVISION_ID_OFFSET
, &pci_cfg_dword
);
12117 if ((pci_cfg_dword
& PCICFG_REVESION_ID_MASK
) ==
12118 PCICFG_REVESION_ID_ERROR_VAL
) {
12119 pr_err("PCI device error, probably due to fan failure, aborting\n");
12121 goto err_out_disable
;
12124 if (atomic_read(&pdev
->enable_cnt
) == 1) {
12125 rc
= pci_request_regions(pdev
, DRV_MODULE_NAME
);
12127 dev_err(&bp
->pdev
->dev
,
12128 "Cannot obtain PCI resources, aborting\n");
12129 goto err_out_disable
;
12132 pci_set_master(pdev
);
12133 pci_save_state(pdev
);
12137 bp
->pm_cap
= pdev
->pm_cap
;
12138 if (bp
->pm_cap
== 0) {
12139 dev_err(&bp
->pdev
->dev
,
12140 "Cannot find power management capability, aborting\n");
12142 goto err_out_release
;
12146 if (!pci_is_pcie(pdev
)) {
12147 dev_err(&bp
->pdev
->dev
, "Not PCI Express, aborting\n");
12149 goto err_out_release
;
12152 rc
= bnx2x_set_coherency_mask(bp
);
12154 goto err_out_release
;
12156 dev
->mem_start
= pci_resource_start(pdev
, 0);
12157 dev
->base_addr
= dev
->mem_start
;
12158 dev
->mem_end
= pci_resource_end(pdev
, 0);
12160 dev
->irq
= pdev
->irq
;
12162 bp
->regview
= pci_ioremap_bar(pdev
, 0);
12163 if (!bp
->regview
) {
12164 dev_err(&bp
->pdev
->dev
,
12165 "Cannot map register space, aborting\n");
12167 goto err_out_release
;
12170 /* In E1/E1H use pci device function given by kernel.
12171 * In E2/E3 read physical function from ME register since these chips
12172 * support Physical Device Assignment where kernel BDF maybe arbitrary
12173 * (depending on hypervisor).
12176 bp
->pf_num
= PCI_FUNC(pdev
->devfn
);
12179 pci_read_config_dword(bp
->pdev
,
12180 PCICFG_ME_REGISTER
, &pci_cfg_dword
);
12181 bp
->pf_num
= (u8
)((pci_cfg_dword
& ME_REG_ABS_PF_NUM
) >>
12182 ME_REG_ABS_PF_NUM_SHIFT
);
12184 BNX2X_DEV_INFO("me reg PF num: %d\n", bp
->pf_num
);
12186 /* clean indirect addresses */
12187 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
,
12188 PCICFG_VENDOR_ID_OFFSET
);
12190 * Clean the following indirect addresses for all functions since it
12191 * is not used by the driver.
12194 REG_WR(bp
, PXP2_REG_PGL_ADDR_88_F0
, 0);
12195 REG_WR(bp
, PXP2_REG_PGL_ADDR_8C_F0
, 0);
12196 REG_WR(bp
, PXP2_REG_PGL_ADDR_90_F0
, 0);
12197 REG_WR(bp
, PXP2_REG_PGL_ADDR_94_F0
, 0);
12200 REG_WR(bp
, PXP2_REG_PGL_ADDR_88_F1
, 0);
12201 REG_WR(bp
, PXP2_REG_PGL_ADDR_8C_F1
, 0);
12202 REG_WR(bp
, PXP2_REG_PGL_ADDR_90_F1
, 0);
12203 REG_WR(bp
, PXP2_REG_PGL_ADDR_94_F1
, 0);
12206 /* Enable internal target-read (in case we are probed after PF
12207 * FLR). Must be done prior to any BAR read access. Only for
12212 PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ
, 1);
12215 dev
->watchdog_timeo
= TX_TIMEOUT
;
12217 dev
->netdev_ops
= &bnx2x_netdev_ops
;
12218 bnx2x_set_ethtool_ops(bp
, dev
);
12220 dev
->priv_flags
|= IFF_UNICAST_FLT
;
12222 dev
->hw_features
= NETIF_F_SG
| NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
12223 NETIF_F_TSO
| NETIF_F_TSO_ECN
| NETIF_F_TSO6
|
12224 NETIF_F_RXCSUM
| NETIF_F_LRO
| NETIF_F_GRO
|
12225 NETIF_F_RXHASH
| NETIF_F_HW_VLAN_CTAG_TX
;
12226 if (!CHIP_IS_E1x(bp
)) {
12227 dev
->hw_features
|= NETIF_F_GSO_GRE
| NETIF_F_GSO_UDP_TUNNEL
;
12228 dev
->hw_enc_features
=
12229 NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
| NETIF_F_SG
|
12230 NETIF_F_TSO
| NETIF_F_TSO_ECN
| NETIF_F_TSO6
|
12231 NETIF_F_GSO_GRE
| NETIF_F_GSO_UDP_TUNNEL
;
12234 dev
->vlan_features
= NETIF_F_SG
| NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
12235 NETIF_F_TSO
| NETIF_F_TSO_ECN
| NETIF_F_TSO6
| NETIF_F_HIGHDMA
;
12237 dev
->features
|= dev
->hw_features
| NETIF_F_HW_VLAN_CTAG_RX
;
12238 if (bp
->flags
& USING_DAC_FLAG
)
12239 dev
->features
|= NETIF_F_HIGHDMA
;
12241 /* Add Loopback capability to the device */
12242 dev
->hw_features
|= NETIF_F_LOOPBACK
;
12245 dev
->dcbnl_ops
= &bnx2x_dcbnl_ops
;
12248 /* get_port_hwinfo() will set prtad and mmds properly */
12249 bp
->mdio
.prtad
= MDIO_PRTAD_NONE
;
12251 bp
->mdio
.mode_support
= MDIO_SUPPORTS_C45
| MDIO_EMULATE_C22
;
12252 bp
->mdio
.dev
= dev
;
12253 bp
->mdio
.mdio_read
= bnx2x_mdio_read
;
12254 bp
->mdio
.mdio_write
= bnx2x_mdio_write
;
12259 if (atomic_read(&pdev
->enable_cnt
) == 1)
12260 pci_release_regions(pdev
);
12263 pci_disable_device(pdev
);
12264 pci_set_drvdata(pdev
, NULL
);
12270 static void bnx2x_get_pcie_width_speed(struct bnx2x
*bp
, int *width
,
12271 enum bnx2x_pci_bus_speed
*speed
)
12273 u32 link_speed
, val
= 0;
12275 pci_read_config_dword(bp
->pdev
, PCICFG_LINK_CONTROL
, &val
);
12276 *width
= (val
& PCICFG_LINK_WIDTH
) >> PCICFG_LINK_WIDTH_SHIFT
;
12278 link_speed
= (val
& PCICFG_LINK_SPEED
) >> PCICFG_LINK_SPEED_SHIFT
;
12280 switch (link_speed
) {
12282 *speed
= BNX2X_PCI_LINK_SPEED_8000
;
12285 *speed
= BNX2X_PCI_LINK_SPEED_5000
;
12288 *speed
= BNX2X_PCI_LINK_SPEED_2500
;
12292 static int bnx2x_check_firmware(struct bnx2x
*bp
)
12294 const struct firmware
*firmware
= bp
->firmware
;
12295 struct bnx2x_fw_file_hdr
*fw_hdr
;
12296 struct bnx2x_fw_file_section
*sections
;
12297 u32 offset
, len
, num_ops
;
12298 __be16
*ops_offsets
;
12302 if (firmware
->size
< sizeof(struct bnx2x_fw_file_hdr
)) {
12303 BNX2X_ERR("Wrong FW size\n");
12307 fw_hdr
= (struct bnx2x_fw_file_hdr
*)firmware
->data
;
12308 sections
= (struct bnx2x_fw_file_section
*)fw_hdr
;
12310 /* Make sure none of the offsets and sizes make us read beyond
12311 * the end of the firmware data */
12312 for (i
= 0; i
< sizeof(*fw_hdr
) / sizeof(*sections
); i
++) {
12313 offset
= be32_to_cpu(sections
[i
].offset
);
12314 len
= be32_to_cpu(sections
[i
].len
);
12315 if (offset
+ len
> firmware
->size
) {
12316 BNX2X_ERR("Section %d length is out of bounds\n", i
);
12321 /* Likewise for the init_ops offsets */
12322 offset
= be32_to_cpu(fw_hdr
->init_ops_offsets
.offset
);
12323 ops_offsets
= (__force __be16
*)(firmware
->data
+ offset
);
12324 num_ops
= be32_to_cpu(fw_hdr
->init_ops
.len
) / sizeof(struct raw_op
);
12326 for (i
= 0; i
< be32_to_cpu(fw_hdr
->init_ops_offsets
.len
) / 2; i
++) {
12327 if (be16_to_cpu(ops_offsets
[i
]) > num_ops
) {
12328 BNX2X_ERR("Section offset %d is out of bounds\n", i
);
12333 /* Check FW version */
12334 offset
= be32_to_cpu(fw_hdr
->fw_version
.offset
);
12335 fw_ver
= firmware
->data
+ offset
;
12336 if ((fw_ver
[0] != BCM_5710_FW_MAJOR_VERSION
) ||
12337 (fw_ver
[1] != BCM_5710_FW_MINOR_VERSION
) ||
12338 (fw_ver
[2] != BCM_5710_FW_REVISION_VERSION
) ||
12339 (fw_ver
[3] != BCM_5710_FW_ENGINEERING_VERSION
)) {
12340 BNX2X_ERR("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
12341 fw_ver
[0], fw_ver
[1], fw_ver
[2], fw_ver
[3],
12342 BCM_5710_FW_MAJOR_VERSION
,
12343 BCM_5710_FW_MINOR_VERSION
,
12344 BCM_5710_FW_REVISION_VERSION
,
12345 BCM_5710_FW_ENGINEERING_VERSION
);
12352 static void be32_to_cpu_n(const u8
*_source
, u8
*_target
, u32 n
)
12354 const __be32
*source
= (const __be32
*)_source
;
12355 u32
*target
= (u32
*)_target
;
12358 for (i
= 0; i
< n
/4; i
++)
12359 target
[i
] = be32_to_cpu(source
[i
]);
12363 Ops array is stored in the following format:
12364 {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
12366 static void bnx2x_prep_ops(const u8
*_source
, u8
*_target
, u32 n
)
12368 const __be32
*source
= (const __be32
*)_source
;
12369 struct raw_op
*target
= (struct raw_op
*)_target
;
12372 for (i
= 0, j
= 0; i
< n
/8; i
++, j
+= 2) {
12373 tmp
= be32_to_cpu(source
[j
]);
12374 target
[i
].op
= (tmp
>> 24) & 0xff;
12375 target
[i
].offset
= tmp
& 0xffffff;
12376 target
[i
].raw_data
= be32_to_cpu(source
[j
+ 1]);
12380 /* IRO array is stored in the following format:
12381 * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) }
12383 static void bnx2x_prep_iro(const u8
*_source
, u8
*_target
, u32 n
)
12385 const __be32
*source
= (const __be32
*)_source
;
12386 struct iro
*target
= (struct iro
*)_target
;
12389 for (i
= 0, j
= 0; i
< n
/sizeof(struct iro
); i
++) {
12390 target
[i
].base
= be32_to_cpu(source
[j
]);
12392 tmp
= be32_to_cpu(source
[j
]);
12393 target
[i
].m1
= (tmp
>> 16) & 0xffff;
12394 target
[i
].m2
= tmp
& 0xffff;
12396 tmp
= be32_to_cpu(source
[j
]);
12397 target
[i
].m3
= (tmp
>> 16) & 0xffff;
12398 target
[i
].size
= tmp
& 0xffff;
12403 static void be16_to_cpu_n(const u8
*_source
, u8
*_target
, u32 n
)
12405 const __be16
*source
= (const __be16
*)_source
;
12406 u16
*target
= (u16
*)_target
;
12409 for (i
= 0; i
< n
/2; i
++)
12410 target
[i
] = be16_to_cpu(source
[i
]);
12413 #define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
12415 u32 len = be32_to_cpu(fw_hdr->arr.len); \
12416 bp->arr = kmalloc(len, GFP_KERNEL); \
12419 func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
12420 (u8 *)bp->arr, len); \
12423 static int bnx2x_init_firmware(struct bnx2x
*bp
)
12425 const char *fw_file_name
;
12426 struct bnx2x_fw_file_hdr
*fw_hdr
;
12432 if (CHIP_IS_E1(bp
))
12433 fw_file_name
= FW_FILE_NAME_E1
;
12434 else if (CHIP_IS_E1H(bp
))
12435 fw_file_name
= FW_FILE_NAME_E1H
;
12436 else if (!CHIP_IS_E1x(bp
))
12437 fw_file_name
= FW_FILE_NAME_E2
;
12439 BNX2X_ERR("Unsupported chip revision\n");
12442 BNX2X_DEV_INFO("Loading %s\n", fw_file_name
);
12444 rc
= request_firmware(&bp
->firmware
, fw_file_name
, &bp
->pdev
->dev
);
12446 BNX2X_ERR("Can't load firmware file %s\n",
12448 goto request_firmware_exit
;
12451 rc
= bnx2x_check_firmware(bp
);
12453 BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name
);
12454 goto request_firmware_exit
;
12457 fw_hdr
= (struct bnx2x_fw_file_hdr
*)bp
->firmware
->data
;
12459 /* Initialize the pointers to the init arrays */
12461 BNX2X_ALLOC_AND_SET(init_data
, request_firmware_exit
, be32_to_cpu_n
);
12464 BNX2X_ALLOC_AND_SET(init_ops
, init_ops_alloc_err
, bnx2x_prep_ops
);
12467 BNX2X_ALLOC_AND_SET(init_ops_offsets
, init_offsets_alloc_err
,
12470 /* STORMs firmware */
12471 INIT_TSEM_INT_TABLE_DATA(bp
) = bp
->firmware
->data
+
12472 be32_to_cpu(fw_hdr
->tsem_int_table_data
.offset
);
12473 INIT_TSEM_PRAM_DATA(bp
) = bp
->firmware
->data
+
12474 be32_to_cpu(fw_hdr
->tsem_pram_data
.offset
);
12475 INIT_USEM_INT_TABLE_DATA(bp
) = bp
->firmware
->data
+
12476 be32_to_cpu(fw_hdr
->usem_int_table_data
.offset
);
12477 INIT_USEM_PRAM_DATA(bp
) = bp
->firmware
->data
+
12478 be32_to_cpu(fw_hdr
->usem_pram_data
.offset
);
12479 INIT_XSEM_INT_TABLE_DATA(bp
) = bp
->firmware
->data
+
12480 be32_to_cpu(fw_hdr
->xsem_int_table_data
.offset
);
12481 INIT_XSEM_PRAM_DATA(bp
) = bp
->firmware
->data
+
12482 be32_to_cpu(fw_hdr
->xsem_pram_data
.offset
);
12483 INIT_CSEM_INT_TABLE_DATA(bp
) = bp
->firmware
->data
+
12484 be32_to_cpu(fw_hdr
->csem_int_table_data
.offset
);
12485 INIT_CSEM_PRAM_DATA(bp
) = bp
->firmware
->data
+
12486 be32_to_cpu(fw_hdr
->csem_pram_data
.offset
);
12488 BNX2X_ALLOC_AND_SET(iro_arr
, iro_alloc_err
, bnx2x_prep_iro
);
12493 kfree(bp
->init_ops_offsets
);
12494 init_offsets_alloc_err
:
12495 kfree(bp
->init_ops
);
12496 init_ops_alloc_err
:
12497 kfree(bp
->init_data
);
12498 request_firmware_exit
:
12499 release_firmware(bp
->firmware
);
12500 bp
->firmware
= NULL
;
12505 static void bnx2x_release_firmware(struct bnx2x
*bp
)
12507 kfree(bp
->init_ops_offsets
);
12508 kfree(bp
->init_ops
);
12509 kfree(bp
->init_data
);
12510 release_firmware(bp
->firmware
);
12511 bp
->firmware
= NULL
;
12514 static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv
= {
12515 .init_hw_cmn_chip
= bnx2x_init_hw_common_chip
,
12516 .init_hw_cmn
= bnx2x_init_hw_common
,
12517 .init_hw_port
= bnx2x_init_hw_port
,
12518 .init_hw_func
= bnx2x_init_hw_func
,
12520 .reset_hw_cmn
= bnx2x_reset_common
,
12521 .reset_hw_port
= bnx2x_reset_port
,
12522 .reset_hw_func
= bnx2x_reset_func
,
12524 .gunzip_init
= bnx2x_gunzip_init
,
12525 .gunzip_end
= bnx2x_gunzip_end
,
12527 .init_fw
= bnx2x_init_firmware
,
12528 .release_fw
= bnx2x_release_firmware
,
12531 void bnx2x__init_func_obj(struct bnx2x
*bp
)
12533 /* Prepare DMAE related driver resources */
12534 bnx2x_setup_dmae(bp
);
12536 bnx2x_init_func_obj(bp
, &bp
->func_obj
,
12537 bnx2x_sp(bp
, func_rdata
),
12538 bnx2x_sp_mapping(bp
, func_rdata
),
12539 bnx2x_sp(bp
, func_afex_rdata
),
12540 bnx2x_sp_mapping(bp
, func_afex_rdata
),
12541 &bnx2x_func_sp_drv
);
12544 /* must be called after sriov-enable */
12545 static int bnx2x_set_qm_cid_count(struct bnx2x
*bp
)
12547 int cid_count
= BNX2X_L2_MAX_CID(bp
);
12550 cid_count
+= BNX2X_VF_CIDS
;
12552 if (CNIC_SUPPORT(bp
))
12553 cid_count
+= CNIC_CID_MAX
;
12555 return roundup(cid_count
, QM_CID_ROUND
);
12559 * bnx2x_get_num_none_def_sbs - return the number of none default SBs
12564 static int bnx2x_get_num_non_def_sbs(struct pci_dev
*pdev
,
12565 int cnic_cnt
, bool is_vf
)
12570 pos
= pci_find_capability(pdev
, PCI_CAP_ID_MSIX
);
12573 * If MSI-X is not supported - return number of SBs needed to support
12574 * one fast path queue: one FP queue + SB for CNIC
12577 dev_info(&pdev
->dev
, "no msix capability found\n");
12578 return 1 + cnic_cnt
;
12580 dev_info(&pdev
->dev
, "msix capability found\n");
12583 * The value in the PCI configuration space is the index of the last
12584 * entry, namely one less than the actual size of the table, which is
12585 * exactly what we want to return from this function: number of all SBs
12586 * without the default SB.
12587 * For VFs there is no default SB, then we return (index+1).
12589 pci_read_config_word(pdev
, pos
+ PCI_MSI_FLAGS
, &control
);
12591 index
= control
& PCI_MSIX_FLAGS_QSIZE
;
12593 return is_vf
? index
+ 1 : index
;
12596 static int set_max_cos_est(int chip_id
)
12602 return BNX2X_MULTI_TX_COS_E1X
;
12606 return BNX2X_MULTI_TX_COS_E2_E3A0
;
12612 case BCM57840_4_10
:
12613 case BCM57840_2_20
:
12622 return BNX2X_MULTI_TX_COS_E3B0
;
12625 pr_err("Unknown board_type (%d), aborting\n", chip_id
);
12630 static int set_is_vf(int chip_id
)
12644 struct cnic_eth_dev
*bnx2x_cnic_probe(struct net_device
*dev
);
12646 static int bnx2x_init_one(struct pci_dev
*pdev
,
12647 const struct pci_device_id
*ent
)
12649 struct net_device
*dev
= NULL
;
12652 enum bnx2x_pci_bus_speed pcie_speed
;
12653 int rc
, max_non_def_sbs
;
12654 int rx_count
, tx_count
, rss_count
, doorbell_size
;
12659 /* An estimated maximum supported CoS number according to the chip
12661 * We will try to roughly estimate the maximum number of CoSes this chip
12662 * may support in order to minimize the memory allocated for Tx
12663 * netdev_queue's. This number will be accurately calculated during the
12664 * initialization of bp->max_cos based on the chip versions AND chip
12665 * revision in the bnx2x_init_bp().
12667 max_cos_est
= set_max_cos_est(ent
->driver_data
);
12668 if (max_cos_est
< 0)
12669 return max_cos_est
;
12670 is_vf
= set_is_vf(ent
->driver_data
);
12671 cnic_cnt
= is_vf
? 0 : 1;
12673 max_non_def_sbs
= bnx2x_get_num_non_def_sbs(pdev
, cnic_cnt
, is_vf
);
12675 /* Maximum number of RSS queues: one IGU SB goes to CNIC */
12676 rss_count
= is_vf
? 1 : max_non_def_sbs
- cnic_cnt
;
12681 /* Maximum number of netdev Rx queues: RSS + FCoE L2 */
12682 rx_count
= rss_count
+ cnic_cnt
;
12684 /* Maximum number of netdev Tx queues:
12685 * Maximum TSS queues * Maximum supported number of CoS + FCoE L2
12687 tx_count
= rss_count
* max_cos_est
+ cnic_cnt
;
12689 /* dev zeroed in init_etherdev */
12690 dev
= alloc_etherdev_mqs(sizeof(*bp
), tx_count
, rx_count
);
12694 bp
= netdev_priv(dev
);
12698 bp
->flags
|= IS_VF_FLAG
;
12700 bp
->igu_sb_cnt
= max_non_def_sbs
;
12701 bp
->igu_base_addr
= IS_VF(bp
) ? PXP_VF_ADDR_IGU_START
: BAR_IGU_INTMEM
;
12702 bp
->msg_enable
= debug
;
12703 bp
->cnic_support
= cnic_cnt
;
12704 bp
->cnic_probe
= bnx2x_cnic_probe
;
12706 pci_set_drvdata(pdev
, dev
);
12708 rc
= bnx2x_init_dev(bp
, pdev
, dev
, ent
->driver_data
);
12714 BNX2X_DEV_INFO("This is a %s function\n",
12715 IS_PF(bp
) ? "physical" : "virtual");
12716 BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp
) ? "on" : "off");
12717 BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs
);
12718 BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n",
12719 tx_count
, rx_count
);
12721 rc
= bnx2x_init_bp(bp
);
12723 goto init_one_exit
;
12725 /* Map doorbells here as we need the real value of bp->max_cos which
12726 * is initialized in bnx2x_init_bp() to determine the number of
12730 bp
->doorbells
= bnx2x_vf_doorbells(bp
);
12731 rc
= bnx2x_vf_pci_alloc(bp
);
12733 goto init_one_exit
;
12735 doorbell_size
= BNX2X_L2_MAX_CID(bp
) * (1 << BNX2X_DB_SHIFT
);
12736 if (doorbell_size
> pci_resource_len(pdev
, 2)) {
12737 dev_err(&bp
->pdev
->dev
,
12738 "Cannot map doorbells, bar size too small, aborting\n");
12740 goto init_one_exit
;
12742 bp
->doorbells
= ioremap_nocache(pci_resource_start(pdev
, 2),
12745 if (!bp
->doorbells
) {
12746 dev_err(&bp
->pdev
->dev
,
12747 "Cannot map doorbell space, aborting\n");
12749 goto init_one_exit
;
12753 rc
= bnx2x_vfpf_acquire(bp
, tx_count
, rx_count
);
12755 goto init_one_exit
;
12758 /* Enable SRIOV if capability found in configuration space */
12759 rc
= bnx2x_iov_init_one(bp
, int_mode
, BNX2X_MAX_NUM_OF_VFS
);
12761 goto init_one_exit
;
12763 /* calc qm_cid_count */
12764 bp
->qm_cid_count
= bnx2x_set_qm_cid_count(bp
);
12765 BNX2X_DEV_INFO("qm_cid_count %d\n", bp
->qm_cid_count
);
12767 /* disable FCOE L2 queue for E1x*/
12768 if (CHIP_IS_E1x(bp
))
12769 bp
->flags
|= NO_FCOE_FLAG
;
12771 /* Set bp->num_queues for MSI-X mode*/
12772 bnx2x_set_num_queues(bp
);
12774 /* Configure interrupt mode: try to enable MSI-X/MSI if
12777 rc
= bnx2x_set_int_mode(bp
);
12779 dev_err(&pdev
->dev
, "Cannot set interrupts\n");
12780 goto init_one_exit
;
12782 BNX2X_DEV_INFO("set interrupts successfully\n");
12784 /* register the net device */
12785 rc
= register_netdev(dev
);
12787 dev_err(&pdev
->dev
, "Cannot register net device\n");
12788 goto init_one_exit
;
12790 BNX2X_DEV_INFO("device name after netdev register %s\n", dev
->name
);
12792 if (!NO_FCOE(bp
)) {
12793 /* Add storage MAC address */
12795 dev_addr_add(bp
->dev
, bp
->fip_mac
, NETDEV_HW_ADDR_T_SAN
);
12799 bnx2x_get_pcie_width_speed(bp
, &pcie_width
, &pcie_speed
);
12800 BNX2X_DEV_INFO("got pcie width %d and speed %d\n",
12801 pcie_width
, pcie_speed
);
12803 BNX2X_DEV_INFO("%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
12804 board_info
[ent
->driver_data
].name
,
12805 (CHIP_REV(bp
) >> 12) + 'A', (CHIP_METAL(bp
) >> 4),
12807 pcie_speed
== BNX2X_PCI_LINK_SPEED_2500
? "2.5GHz" :
12808 pcie_speed
== BNX2X_PCI_LINK_SPEED_5000
? "5.0GHz" :
12809 pcie_speed
== BNX2X_PCI_LINK_SPEED_8000
? "8.0GHz" :
12811 dev
->base_addr
, bp
->pdev
->irq
, dev
->dev_addr
);
12817 iounmap(bp
->regview
);
12819 if (IS_PF(bp
) && bp
->doorbells
)
12820 iounmap(bp
->doorbells
);
12824 if (atomic_read(&pdev
->enable_cnt
) == 1)
12825 pci_release_regions(pdev
);
12827 pci_disable_device(pdev
);
12828 pci_set_drvdata(pdev
, NULL
);
12833 static void __bnx2x_remove(struct pci_dev
*pdev
,
12834 struct net_device
*dev
,
12836 bool remove_netdev
)
12838 /* Delete storage MAC address */
12839 if (!NO_FCOE(bp
)) {
12841 dev_addr_del(bp
->dev
, bp
->fip_mac
, NETDEV_HW_ADDR_T_SAN
);
12846 /* Delete app tlvs from dcbnl */
12847 bnx2x_dcbnl_update_applist(bp
, true);
12852 (bp
->flags
& BC_SUPPORTS_RMMOD_CMD
))
12853 bnx2x_fw_command(bp
, DRV_MSG_CODE_RMMOD
, 0);
12855 /* Close the interface - either directly or implicitly */
12856 if (remove_netdev
) {
12857 unregister_netdev(dev
);
12864 bnx2x_iov_remove_one(bp
);
12866 /* Power on: we can't let PCI layer write to us while we are in D3 */
12868 bnx2x_set_power_state(bp
, PCI_D0
);
12870 /* Disable MSI/MSI-X */
12871 bnx2x_disable_msi(bp
);
12875 bnx2x_set_power_state(bp
, PCI_D3hot
);
12877 /* Make sure RESET task is not scheduled before continuing */
12878 cancel_delayed_work_sync(&bp
->sp_rtnl_task
);
12880 /* send message via vfpf channel to release the resources of this vf */
12882 bnx2x_vfpf_release(bp
);
12884 /* Assumes no further PCIe PM changes will occur */
12885 if (system_state
== SYSTEM_POWER_OFF
) {
12886 pci_wake_from_d3(pdev
, bp
->wol
);
12887 pci_set_power_state(pdev
, PCI_D3hot
);
12891 iounmap(bp
->regview
);
12893 /* for vf doorbells are part of the regview and were unmapped along with
12894 * it. FW is only loaded by PF.
12898 iounmap(bp
->doorbells
);
12900 bnx2x_release_firmware(bp
);
12902 bnx2x_free_mem_bp(bp
);
12907 if (atomic_read(&pdev
->enable_cnt
) == 1)
12908 pci_release_regions(pdev
);
12910 pci_disable_device(pdev
);
12911 pci_set_drvdata(pdev
, NULL
);
12914 static void bnx2x_remove_one(struct pci_dev
*pdev
)
12916 struct net_device
*dev
= pci_get_drvdata(pdev
);
12920 dev_err(&pdev
->dev
, "BAD net device from bnx2x_init_one\n");
12923 bp
= netdev_priv(dev
);
12925 __bnx2x_remove(pdev
, dev
, bp
, true);
12928 static int bnx2x_eeh_nic_unload(struct bnx2x
*bp
)
12930 bp
->state
= BNX2X_STATE_CLOSING_WAIT4_HALT
;
12932 bp
->rx_mode
= BNX2X_RX_MODE_NONE
;
12934 if (CNIC_LOADED(bp
))
12935 bnx2x_cnic_notify(bp
, CNIC_CTL_STOP_CMD
);
12938 bnx2x_tx_disable(bp
);
12939 /* Delete all NAPI objects */
12940 bnx2x_del_all_napi(bp
);
12941 if (CNIC_LOADED(bp
))
12942 bnx2x_del_all_napi_cnic(bp
);
12943 netdev_reset_tc(bp
->dev
);
12945 del_timer_sync(&bp
->timer
);
12946 cancel_delayed_work(&bp
->sp_task
);
12947 cancel_delayed_work(&bp
->period_task
);
12949 spin_lock_bh(&bp
->stats_lock
);
12950 bp
->stats_state
= STATS_STATE_DISABLED
;
12951 spin_unlock_bh(&bp
->stats_lock
);
12953 bnx2x_save_statistics(bp
);
12955 netif_carrier_off(bp
->dev
);
12961 * bnx2x_io_error_detected - called when PCI error is detected
12962 * @pdev: Pointer to PCI device
12963 * @state: The current pci connection state
12965 * This function is called after a PCI bus error affecting
12966 * this device has been detected.
12968 static pci_ers_result_t
bnx2x_io_error_detected(struct pci_dev
*pdev
,
12969 pci_channel_state_t state
)
12971 struct net_device
*dev
= pci_get_drvdata(pdev
);
12972 struct bnx2x
*bp
= netdev_priv(dev
);
12976 BNX2X_ERR("IO error detected\n");
12978 netif_device_detach(dev
);
12980 if (state
== pci_channel_io_perm_failure
) {
12982 return PCI_ERS_RESULT_DISCONNECT
;
12985 if (netif_running(dev
))
12986 bnx2x_eeh_nic_unload(bp
);
12988 bnx2x_prev_path_mark_eeh(bp
);
12990 pci_disable_device(pdev
);
12994 /* Request a slot reset */
12995 return PCI_ERS_RESULT_NEED_RESET
;
12999 * bnx2x_io_slot_reset - called after the PCI bus has been reset
13000 * @pdev: Pointer to PCI device
13002 * Restart the card from scratch, as if from a cold-boot.
13004 static pci_ers_result_t
bnx2x_io_slot_reset(struct pci_dev
*pdev
)
13006 struct net_device
*dev
= pci_get_drvdata(pdev
);
13007 struct bnx2x
*bp
= netdev_priv(dev
);
13011 BNX2X_ERR("IO slot reset initializing...\n");
13012 if (pci_enable_device(pdev
)) {
13013 dev_err(&pdev
->dev
,
13014 "Cannot re-enable PCI device after reset\n");
13016 return PCI_ERS_RESULT_DISCONNECT
;
13019 pci_set_master(pdev
);
13020 pci_restore_state(pdev
);
13021 pci_save_state(pdev
);
13023 if (netif_running(dev
))
13024 bnx2x_set_power_state(bp
, PCI_D0
);
13026 if (netif_running(dev
)) {
13027 BNX2X_ERR("IO slot reset --> driver unload\n");
13029 /* MCP should have been reset; Need to wait for validity */
13030 bnx2x_init_shmem(bp
);
13032 if (IS_PF(bp
) && SHMEM2_HAS(bp
, drv_capabilities_flag
)) {
13036 drv_capabilities_flag
[BP_FW_MB_IDX(bp
)]);
13037 SHMEM2_WR(bp
, drv_capabilities_flag
[BP_FW_MB_IDX(bp
)],
13038 v
& ~DRV_FLAGS_CAPABILITIES_LOADED_L2
);
13040 bnx2x_drain_tx_queues(bp
);
13041 bnx2x_send_unload_req(bp
, UNLOAD_RECOVERY
);
13042 bnx2x_netif_stop(bp
, 1);
13043 bnx2x_free_irq(bp
);
13045 /* Report UNLOAD_DONE to MCP */
13046 bnx2x_send_unload_done(bp
, true);
13051 bnx2x_prev_unload(bp
);
13053 /* We should have reseted the engine, so It's fair to
13054 * assume the FW will no longer write to the bnx2x driver.
13056 bnx2x_squeeze_objects(bp
);
13057 bnx2x_free_skbs(bp
);
13058 for_each_rx_queue(bp
, i
)
13059 bnx2x_free_rx_sge_range(bp
, bp
->fp
+ i
, NUM_RX_SGE
);
13060 bnx2x_free_fp_mem(bp
);
13061 bnx2x_free_mem(bp
);
13063 bp
->state
= BNX2X_STATE_CLOSED
;
13068 return PCI_ERS_RESULT_RECOVERED
;
13072 * bnx2x_io_resume - called when traffic can start flowing again
13073 * @pdev: Pointer to PCI device
13075 * This callback is called when the error recovery driver tells us that
13076 * its OK to resume normal operation.
13078 static void bnx2x_io_resume(struct pci_dev
*pdev
)
13080 struct net_device
*dev
= pci_get_drvdata(pdev
);
13081 struct bnx2x
*bp
= netdev_priv(dev
);
13083 if (bp
->recovery_state
!= BNX2X_RECOVERY_DONE
) {
13084 netdev_err(bp
->dev
, "Handling parity error recovery. Try again later\n");
13090 bp
->fw_seq
= SHMEM_RD(bp
, func_mb
[BP_FW_MB_IDX(bp
)].drv_mb_header
) &
13091 DRV_MSG_SEQ_NUMBER_MASK
;
13093 if (netif_running(dev
))
13094 bnx2x_nic_load(bp
, LOAD_NORMAL
);
13096 netif_device_attach(dev
);
13101 static const struct pci_error_handlers bnx2x_err_handler
= {
13102 .error_detected
= bnx2x_io_error_detected
,
13103 .slot_reset
= bnx2x_io_slot_reset
,
13104 .resume
= bnx2x_io_resume
,
13107 static void bnx2x_shutdown(struct pci_dev
*pdev
)
13109 struct net_device
*dev
= pci_get_drvdata(pdev
);
13115 bp
= netdev_priv(dev
);
13120 netif_device_detach(dev
);
13123 /* Don't remove the netdevice, as there are scenarios which will cause
13124 * the kernel to hang, e.g., when trying to remove bnx2i while the
13125 * rootfs is mounted from SAN.
13127 __bnx2x_remove(pdev
, dev
, bp
, false);
13130 static struct pci_driver bnx2x_pci_driver
= {
13131 .name
= DRV_MODULE_NAME
,
13132 .id_table
= bnx2x_pci_tbl
,
13133 .probe
= bnx2x_init_one
,
13134 .remove
= bnx2x_remove_one
,
13135 .suspend
= bnx2x_suspend
,
13136 .resume
= bnx2x_resume
,
13137 .err_handler
= &bnx2x_err_handler
,
13138 #ifdef CONFIG_BNX2X_SRIOV
13139 .sriov_configure
= bnx2x_sriov_configure
,
13141 .shutdown
= bnx2x_shutdown
,
13144 static int __init
bnx2x_init(void)
13148 pr_info("%s", version
);
13150 bnx2x_wq
= create_singlethread_workqueue("bnx2x");
13151 if (bnx2x_wq
== NULL
) {
13152 pr_err("Cannot create workqueue\n");
13156 ret
= pci_register_driver(&bnx2x_pci_driver
);
13158 pr_err("Cannot register driver\n");
13159 destroy_workqueue(bnx2x_wq
);
13164 static void __exit
bnx2x_cleanup(void)
13166 struct list_head
*pos
, *q
;
13168 pci_unregister_driver(&bnx2x_pci_driver
);
13170 destroy_workqueue(bnx2x_wq
);
13172 /* Free globally allocated resources */
13173 list_for_each_safe(pos
, q
, &bnx2x_prev_list
) {
13174 struct bnx2x_prev_path_list
*tmp
=
13175 list_entry(pos
, struct bnx2x_prev_path_list
, list
);
13181 void bnx2x_notify_link_changed(struct bnx2x
*bp
)
13183 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_12
+ BP_FUNC(bp
)*sizeof(u32
), 1);
13186 module_init(bnx2x_init
);
13187 module_exit(bnx2x_cleanup
);
13190 * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s).
13192 * @bp: driver handle
13193 * @set: set or clear the CAM entry
13195 * This function will wait until the ramrod completion returns.
13196 * Return 0 if success, -ENODEV if ramrod doesn't return.
13198 static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x
*bp
)
13200 unsigned long ramrod_flags
= 0;
13202 __set_bit(RAMROD_COMP_WAIT
, &ramrod_flags
);
13203 return bnx2x_set_mac_one(bp
, bp
->cnic_eth_dev
.iscsi_mac
,
13204 &bp
->iscsi_l2_mac_obj
, true,
13205 BNX2X_ISCSI_ETH_MAC
, &ramrod_flags
);
13208 /* count denotes the number of new completions we have seen */
13209 static void bnx2x_cnic_sp_post(struct bnx2x
*bp
, int count
)
13211 struct eth_spe
*spe
;
13212 int cxt_index
, cxt_offset
;
13214 #ifdef BNX2X_STOP_ON_ERROR
13215 if (unlikely(bp
->panic
))
13219 spin_lock_bh(&bp
->spq_lock
);
13220 BUG_ON(bp
->cnic_spq_pending
< count
);
13221 bp
->cnic_spq_pending
-= count
;
13223 for (; bp
->cnic_kwq_pending
; bp
->cnic_kwq_pending
--) {
13224 u16 type
= (le16_to_cpu(bp
->cnic_kwq_cons
->hdr
.type
)
13225 & SPE_HDR_CONN_TYPE
) >>
13226 SPE_HDR_CONN_TYPE_SHIFT
;
13227 u8 cmd
= (le32_to_cpu(bp
->cnic_kwq_cons
->hdr
.conn_and_cmd_data
)
13228 >> SPE_HDR_CMD_ID_SHIFT
) & 0xff;
13230 /* Set validation for iSCSI L2 client before sending SETUP
13233 if (type
== ETH_CONNECTION_TYPE
) {
13234 if (cmd
== RAMROD_CMD_ID_ETH_CLIENT_SETUP
) {
13235 cxt_index
= BNX2X_ISCSI_ETH_CID(bp
) /
13237 cxt_offset
= BNX2X_ISCSI_ETH_CID(bp
) -
13238 (cxt_index
* ILT_PAGE_CIDS
);
13239 bnx2x_set_ctx_validation(bp
,
13240 &bp
->context
[cxt_index
].
13241 vcxt
[cxt_offset
].eth
,
13242 BNX2X_ISCSI_ETH_CID(bp
));
13247 * There may be not more than 8 L2, not more than 8 L5 SPEs
13248 * and in the air. We also check that number of outstanding
13249 * COMMON ramrods is not more than the EQ and SPQ can
13252 if (type
== ETH_CONNECTION_TYPE
) {
13253 if (!atomic_read(&bp
->cq_spq_left
))
13256 atomic_dec(&bp
->cq_spq_left
);
13257 } else if (type
== NONE_CONNECTION_TYPE
) {
13258 if (!atomic_read(&bp
->eq_spq_left
))
13261 atomic_dec(&bp
->eq_spq_left
);
13262 } else if ((type
== ISCSI_CONNECTION_TYPE
) ||
13263 (type
== FCOE_CONNECTION_TYPE
)) {
13264 if (bp
->cnic_spq_pending
>=
13265 bp
->cnic_eth_dev
.max_kwqe_pending
)
13268 bp
->cnic_spq_pending
++;
13270 BNX2X_ERR("Unknown SPE type: %d\n", type
);
13275 spe
= bnx2x_sp_get_next(bp
);
13276 *spe
= *bp
->cnic_kwq_cons
;
13278 DP(BNX2X_MSG_SP
, "pending on SPQ %d, on KWQ %d count %d\n",
13279 bp
->cnic_spq_pending
, bp
->cnic_kwq_pending
, count
);
13281 if (bp
->cnic_kwq_cons
== bp
->cnic_kwq_last
)
13282 bp
->cnic_kwq_cons
= bp
->cnic_kwq
;
13284 bp
->cnic_kwq_cons
++;
13286 bnx2x_sp_prod_update(bp
);
13287 spin_unlock_bh(&bp
->spq_lock
);
13290 static int bnx2x_cnic_sp_queue(struct net_device
*dev
,
13291 struct kwqe_16
*kwqes
[], u32 count
)
13293 struct bnx2x
*bp
= netdev_priv(dev
);
13296 #ifdef BNX2X_STOP_ON_ERROR
13297 if (unlikely(bp
->panic
)) {
13298 BNX2X_ERR("Can't post to SP queue while panic\n");
13303 if ((bp
->recovery_state
!= BNX2X_RECOVERY_DONE
) &&
13304 (bp
->recovery_state
!= BNX2X_RECOVERY_NIC_LOADING
)) {
13305 BNX2X_ERR("Handling parity error recovery. Try again later\n");
13309 spin_lock_bh(&bp
->spq_lock
);
13311 for (i
= 0; i
< count
; i
++) {
13312 struct eth_spe
*spe
= (struct eth_spe
*)kwqes
[i
];
13314 if (bp
->cnic_kwq_pending
== MAX_SP_DESC_CNT
)
13317 *bp
->cnic_kwq_prod
= *spe
;
13319 bp
->cnic_kwq_pending
++;
13321 DP(BNX2X_MSG_SP
, "L5 SPQE %x %x %x:%x pos %d\n",
13322 spe
->hdr
.conn_and_cmd_data
, spe
->hdr
.type
,
13323 spe
->data
.update_data_addr
.hi
,
13324 spe
->data
.update_data_addr
.lo
,
13325 bp
->cnic_kwq_pending
);
13327 if (bp
->cnic_kwq_prod
== bp
->cnic_kwq_last
)
13328 bp
->cnic_kwq_prod
= bp
->cnic_kwq
;
13330 bp
->cnic_kwq_prod
++;
13333 spin_unlock_bh(&bp
->spq_lock
);
13335 if (bp
->cnic_spq_pending
< bp
->cnic_eth_dev
.max_kwqe_pending
)
13336 bnx2x_cnic_sp_post(bp
, 0);
13341 static int bnx2x_cnic_ctl_send(struct bnx2x
*bp
, struct cnic_ctl_info
*ctl
)
13343 struct cnic_ops
*c_ops
;
13346 mutex_lock(&bp
->cnic_mutex
);
13347 c_ops
= rcu_dereference_protected(bp
->cnic_ops
,
13348 lockdep_is_held(&bp
->cnic_mutex
));
13350 rc
= c_ops
->cnic_ctl(bp
->cnic_data
, ctl
);
13351 mutex_unlock(&bp
->cnic_mutex
);
13356 static int bnx2x_cnic_ctl_send_bh(struct bnx2x
*bp
, struct cnic_ctl_info
*ctl
)
13358 struct cnic_ops
*c_ops
;
13362 c_ops
= rcu_dereference(bp
->cnic_ops
);
13364 rc
= c_ops
->cnic_ctl(bp
->cnic_data
, ctl
);
13371 * for commands that have no data
13373 int bnx2x_cnic_notify(struct bnx2x
*bp
, int cmd
)
13375 struct cnic_ctl_info ctl
= {0};
13379 return bnx2x_cnic_ctl_send(bp
, &ctl
);
13382 static void bnx2x_cnic_cfc_comp(struct bnx2x
*bp
, int cid
, u8 err
)
13384 struct cnic_ctl_info ctl
= {0};
13386 /* first we tell CNIC and only then we count this as a completion */
13387 ctl
.cmd
= CNIC_CTL_COMPLETION_CMD
;
13388 ctl
.data
.comp
.cid
= cid
;
13389 ctl
.data
.comp
.error
= err
;
13391 bnx2x_cnic_ctl_send_bh(bp
, &ctl
);
13392 bnx2x_cnic_sp_post(bp
, 0);
13395 /* Called with netif_addr_lock_bh() taken.
13396 * Sets an rx_mode config for an iSCSI ETH client.
13398 * Completion should be checked outside.
13400 static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x
*bp
, bool start
)
13402 unsigned long accept_flags
= 0, ramrod_flags
= 0;
13403 u8 cl_id
= bnx2x_cnic_eth_cl_id(bp
, BNX2X_ISCSI_ETH_CL_ID_IDX
);
13404 int sched_state
= BNX2X_FILTER_ISCSI_ETH_STOP_SCHED
;
13407 /* Start accepting on iSCSI L2 ring. Accept all multicasts
13408 * because it's the only way for UIO Queue to accept
13409 * multicasts (in non-promiscuous mode only one Queue per
13410 * function will receive multicast packets (leading in our
13413 __set_bit(BNX2X_ACCEPT_UNICAST
, &accept_flags
);
13414 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, &accept_flags
);
13415 __set_bit(BNX2X_ACCEPT_BROADCAST
, &accept_flags
);
13416 __set_bit(BNX2X_ACCEPT_ANY_VLAN
, &accept_flags
);
13418 /* Clear STOP_PENDING bit if START is requested */
13419 clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED
, &bp
->sp_state
);
13421 sched_state
= BNX2X_FILTER_ISCSI_ETH_START_SCHED
;
13423 /* Clear START_PENDING bit if STOP is requested */
13424 clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED
, &bp
->sp_state
);
13426 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
))
13427 set_bit(sched_state
, &bp
->sp_state
);
13429 __set_bit(RAMROD_RX
, &ramrod_flags
);
13430 bnx2x_set_q_rx_mode(bp
, cl_id
, 0, accept_flags
, 0,
13435 static int bnx2x_drv_ctl(struct net_device
*dev
, struct drv_ctl_info
*ctl
)
13437 struct bnx2x
*bp
= netdev_priv(dev
);
13440 switch (ctl
->cmd
) {
13441 case DRV_CTL_CTXTBL_WR_CMD
: {
13442 u32 index
= ctl
->data
.io
.offset
;
13443 dma_addr_t addr
= ctl
->data
.io
.dma_addr
;
13445 bnx2x_ilt_wr(bp
, index
, addr
);
13449 case DRV_CTL_RET_L5_SPQ_CREDIT_CMD
: {
13450 int count
= ctl
->data
.credit
.credit_count
;
13452 bnx2x_cnic_sp_post(bp
, count
);
13456 /* rtnl_lock is held. */
13457 case DRV_CTL_START_L2_CMD
: {
13458 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
13459 unsigned long sp_bits
= 0;
13461 /* Configure the iSCSI classification object */
13462 bnx2x_init_mac_obj(bp
, &bp
->iscsi_l2_mac_obj
,
13463 cp
->iscsi_l2_client_id
,
13464 cp
->iscsi_l2_cid
, BP_FUNC(bp
),
13465 bnx2x_sp(bp
, mac_rdata
),
13466 bnx2x_sp_mapping(bp
, mac_rdata
),
13467 BNX2X_FILTER_MAC_PENDING
,
13468 &bp
->sp_state
, BNX2X_OBJ_TYPE_RX
,
13471 /* Set iSCSI MAC address */
13472 rc
= bnx2x_set_iscsi_eth_mac_addr(bp
);
13479 /* Start accepting on iSCSI L2 ring */
13481 netif_addr_lock_bh(dev
);
13482 bnx2x_set_iscsi_eth_rx_mode(bp
, true);
13483 netif_addr_unlock_bh(dev
);
13485 /* bits to wait on */
13486 __set_bit(BNX2X_FILTER_RX_MODE_PENDING
, &sp_bits
);
13487 __set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED
, &sp_bits
);
13489 if (!bnx2x_wait_sp_comp(bp
, sp_bits
))
13490 BNX2X_ERR("rx_mode completion timed out!\n");
13495 /* rtnl_lock is held. */
13496 case DRV_CTL_STOP_L2_CMD
: {
13497 unsigned long sp_bits
= 0;
13499 /* Stop accepting on iSCSI L2 ring */
13500 netif_addr_lock_bh(dev
);
13501 bnx2x_set_iscsi_eth_rx_mode(bp
, false);
13502 netif_addr_unlock_bh(dev
);
13504 /* bits to wait on */
13505 __set_bit(BNX2X_FILTER_RX_MODE_PENDING
, &sp_bits
);
13506 __set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED
, &sp_bits
);
13508 if (!bnx2x_wait_sp_comp(bp
, sp_bits
))
13509 BNX2X_ERR("rx_mode completion timed out!\n");
13514 /* Unset iSCSI L2 MAC */
13515 rc
= bnx2x_del_all_macs(bp
, &bp
->iscsi_l2_mac_obj
,
13516 BNX2X_ISCSI_ETH_MAC
, true);
13519 case DRV_CTL_RET_L2_SPQ_CREDIT_CMD
: {
13520 int count
= ctl
->data
.credit
.credit_count
;
13522 smp_mb__before_atomic_inc();
13523 atomic_add(count
, &bp
->cq_spq_left
);
13524 smp_mb__after_atomic_inc();
13527 case DRV_CTL_ULP_REGISTER_CMD
: {
13528 int ulp_type
= ctl
->data
.register_data
.ulp_type
;
13530 if (CHIP_IS_E3(bp
)) {
13531 int idx
= BP_FW_MB_IDX(bp
);
13532 u32 cap
= SHMEM2_RD(bp
, drv_capabilities_flag
[idx
]);
13533 int path
= BP_PATH(bp
);
13534 int port
= BP_PORT(bp
);
13536 u32 scratch_offset
;
13539 /* first write capability to shmem2 */
13540 if (ulp_type
== CNIC_ULP_ISCSI
)
13541 cap
|= DRV_FLAGS_CAPABILITIES_LOADED_ISCSI
;
13542 else if (ulp_type
== CNIC_ULP_FCOE
)
13543 cap
|= DRV_FLAGS_CAPABILITIES_LOADED_FCOE
;
13544 SHMEM2_WR(bp
, drv_capabilities_flag
[idx
], cap
);
13546 if ((ulp_type
!= CNIC_ULP_FCOE
) ||
13547 (!SHMEM2_HAS(bp
, ncsi_oem_data_addr
)) ||
13548 (!(bp
->flags
& BC_SUPPORTS_FCOE_FEATURES
)))
13551 /* if reached here - should write fcoe capabilities */
13552 scratch_offset
= SHMEM2_RD(bp
, ncsi_oem_data_addr
);
13553 if (!scratch_offset
)
13555 scratch_offset
+= offsetof(struct glob_ncsi_oem_data
,
13556 fcoe_features
[path
][port
]);
13557 host_addr
= (u32
*) &(ctl
->data
.register_data
.
13559 for (i
= 0; i
< sizeof(struct fcoe_capabilities
);
13561 REG_WR(bp
, scratch_offset
+ i
,
13562 *(host_addr
+ i
/4));
13567 case DRV_CTL_ULP_UNREGISTER_CMD
: {
13568 int ulp_type
= ctl
->data
.ulp_type
;
13570 if (CHIP_IS_E3(bp
)) {
13571 int idx
= BP_FW_MB_IDX(bp
);
13574 cap
= SHMEM2_RD(bp
, drv_capabilities_flag
[idx
]);
13575 if (ulp_type
== CNIC_ULP_ISCSI
)
13576 cap
&= ~DRV_FLAGS_CAPABILITIES_LOADED_ISCSI
;
13577 else if (ulp_type
== CNIC_ULP_FCOE
)
13578 cap
&= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE
;
13579 SHMEM2_WR(bp
, drv_capabilities_flag
[idx
], cap
);
13585 BNX2X_ERR("unknown command %x\n", ctl
->cmd
);
13592 void bnx2x_setup_cnic_irq_info(struct bnx2x
*bp
)
13594 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
13596 if (bp
->flags
& USING_MSIX_FLAG
) {
13597 cp
->drv_state
|= CNIC_DRV_STATE_USING_MSIX
;
13598 cp
->irq_arr
[0].irq_flags
|= CNIC_IRQ_FL_MSIX
;
13599 cp
->irq_arr
[0].vector
= bp
->msix_table
[1].vector
;
13601 cp
->drv_state
&= ~CNIC_DRV_STATE_USING_MSIX
;
13602 cp
->irq_arr
[0].irq_flags
&= ~CNIC_IRQ_FL_MSIX
;
13604 if (!CHIP_IS_E1x(bp
))
13605 cp
->irq_arr
[0].status_blk
= (void *)bp
->cnic_sb
.e2_sb
;
13607 cp
->irq_arr
[0].status_blk
= (void *)bp
->cnic_sb
.e1x_sb
;
13609 cp
->irq_arr
[0].status_blk_num
= bnx2x_cnic_fw_sb_id(bp
);
13610 cp
->irq_arr
[0].status_blk_num2
= bnx2x_cnic_igu_sb_id(bp
);
13611 cp
->irq_arr
[1].status_blk
= bp
->def_status_blk
;
13612 cp
->irq_arr
[1].status_blk_num
= DEF_SB_ID
;
13613 cp
->irq_arr
[1].status_blk_num2
= DEF_SB_IGU_ID
;
13618 void bnx2x_setup_cnic_info(struct bnx2x
*bp
)
13620 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
13622 cp
->ctx_tbl_offset
= FUNC_ILT_BASE(BP_FUNC(bp
)) +
13623 bnx2x_cid_ilt_lines(bp
);
13624 cp
->starting_cid
= bnx2x_cid_ilt_lines(bp
) * ILT_PAGE_CIDS
;
13625 cp
->fcoe_init_cid
= BNX2X_FCOE_ETH_CID(bp
);
13626 cp
->iscsi_l2_cid
= BNX2X_ISCSI_ETH_CID(bp
);
13628 if (NO_ISCSI_OOO(bp
))
13629 cp
->drv_state
|= CNIC_DRV_STATE_NO_ISCSI_OOO
;
13632 static int bnx2x_register_cnic(struct net_device
*dev
, struct cnic_ops
*ops
,
13635 struct bnx2x
*bp
= netdev_priv(dev
);
13636 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
13639 DP(NETIF_MSG_IFUP
, "Register_cnic called\n");
13642 BNX2X_ERR("NULL ops received\n");
13646 if (!CNIC_SUPPORT(bp
)) {
13647 BNX2X_ERR("Can't register CNIC when not supported\n");
13648 return -EOPNOTSUPP
;
13651 if (!CNIC_LOADED(bp
)) {
13652 rc
= bnx2x_load_cnic(bp
);
13654 BNX2X_ERR("CNIC-related load failed\n");
13659 bp
->cnic_enabled
= true;
13661 bp
->cnic_kwq
= kzalloc(PAGE_SIZE
, GFP_KERNEL
);
13665 bp
->cnic_kwq_cons
= bp
->cnic_kwq
;
13666 bp
->cnic_kwq_prod
= bp
->cnic_kwq
;
13667 bp
->cnic_kwq_last
= bp
->cnic_kwq
+ MAX_SP_DESC_CNT
;
13669 bp
->cnic_spq_pending
= 0;
13670 bp
->cnic_kwq_pending
= 0;
13672 bp
->cnic_data
= data
;
13675 cp
->drv_state
|= CNIC_DRV_STATE_REGD
;
13676 cp
->iro_arr
= bp
->iro_arr
;
13678 bnx2x_setup_cnic_irq_info(bp
);
13680 rcu_assign_pointer(bp
->cnic_ops
, ops
);
13685 static int bnx2x_unregister_cnic(struct net_device
*dev
)
13687 struct bnx2x
*bp
= netdev_priv(dev
);
13688 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
13690 mutex_lock(&bp
->cnic_mutex
);
13692 RCU_INIT_POINTER(bp
->cnic_ops
, NULL
);
13693 mutex_unlock(&bp
->cnic_mutex
);
13695 bp
->cnic_enabled
= false;
13696 kfree(bp
->cnic_kwq
);
13697 bp
->cnic_kwq
= NULL
;
13702 struct cnic_eth_dev
*bnx2x_cnic_probe(struct net_device
*dev
)
13704 struct bnx2x
*bp
= netdev_priv(dev
);
13705 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
13707 /* If both iSCSI and FCoE are disabled - return NULL in
13708 * order to indicate CNIC that it should not try to work
13709 * with this device.
13711 if (NO_ISCSI(bp
) && NO_FCOE(bp
))
13714 cp
->drv_owner
= THIS_MODULE
;
13715 cp
->chip_id
= CHIP_ID(bp
);
13716 cp
->pdev
= bp
->pdev
;
13717 cp
->io_base
= bp
->regview
;
13718 cp
->io_base2
= bp
->doorbells
;
13719 cp
->max_kwqe_pending
= 8;
13720 cp
->ctx_blk_size
= CDU_ILT_PAGE_SZ
;
13721 cp
->ctx_tbl_offset
= FUNC_ILT_BASE(BP_FUNC(bp
)) +
13722 bnx2x_cid_ilt_lines(bp
);
13723 cp
->ctx_tbl_len
= CNIC_ILT_LINES
;
13724 cp
->starting_cid
= bnx2x_cid_ilt_lines(bp
) * ILT_PAGE_CIDS
;
13725 cp
->drv_submit_kwqes_16
= bnx2x_cnic_sp_queue
;
13726 cp
->drv_ctl
= bnx2x_drv_ctl
;
13727 cp
->drv_register_cnic
= bnx2x_register_cnic
;
13728 cp
->drv_unregister_cnic
= bnx2x_unregister_cnic
;
13729 cp
->fcoe_init_cid
= BNX2X_FCOE_ETH_CID(bp
);
13730 cp
->iscsi_l2_client_id
=
13731 bnx2x_cnic_eth_cl_id(bp
, BNX2X_ISCSI_ETH_CL_ID_IDX
);
13732 cp
->iscsi_l2_cid
= BNX2X_ISCSI_ETH_CID(bp
);
13734 if (NO_ISCSI_OOO(bp
))
13735 cp
->drv_state
|= CNIC_DRV_STATE_NO_ISCSI_OOO
;
13738 cp
->drv_state
|= CNIC_DRV_STATE_NO_ISCSI
;
13741 cp
->drv_state
|= CNIC_DRV_STATE_NO_FCOE
;
13744 "page_size %d, tbl_offset %d, tbl_lines %d, starting cid %d\n",
13746 cp
->ctx_tbl_offset
,
13752 u32
bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath
*fp
)
13754 struct bnx2x
*bp
= fp
->bp
;
13755 u32 offset
= BAR_USTRORM_INTMEM
;
13758 return bnx2x_vf_ustorm_prods_offset(bp
, fp
);
13759 else if (!CHIP_IS_E1x(bp
))
13760 offset
+= USTORM_RX_PRODS_E2_OFFSET(fp
->cl_qzone_id
);
13762 offset
+= USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp
), fp
->cl_id
);
13767 /* called only on E1H or E2.
13768 * When pretending to be PF, the pretend value is the function number 0...7
13769 * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
13772 int bnx2x_pretend_func(struct bnx2x
*bp
, u16 pretend_func_val
)
13776 if (CHIP_IS_E1H(bp
) && pretend_func_val
>= E1H_FUNC_MAX
)
13779 /* get my own pretend register */
13780 pretend_reg
= bnx2x_get_pretend_reg(bp
);
13781 REG_WR(bp
, pretend_reg
, pretend_func_val
);
13782 REG_RD(bp
, pretend_reg
);