1 /* bnx2x_main.c: Broadcom Everest network driver.
3 * Copyright (c) 2007-2013 Broadcom Corporation
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation.
9 * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
10 * Written by: Eliezer Tamir
11 * Based on code from Michael Chan's bnx2 driver
12 * UDP CSUM errata workaround by Arik Gendelman
13 * Slowpath and fastpath rework by Vladislav Zolotarov
14 * Statistics and Link management by Yitchak Gertner
18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20 #include <linux/module.h>
21 #include <linux/moduleparam.h>
22 #include <linux/kernel.h>
23 #include <linux/device.h> /* for dev_info() */
24 #include <linux/timer.h>
25 #include <linux/errno.h>
26 #include <linux/ioport.h>
27 #include <linux/slab.h>
28 #include <linux/interrupt.h>
29 #include <linux/pci.h>
30 #include <linux/aer.h>
31 #include <linux/init.h>
32 #include <linux/netdevice.h>
33 #include <linux/etherdevice.h>
34 #include <linux/skbuff.h>
35 #include <linux/dma-mapping.h>
36 #include <linux/bitops.h>
37 #include <linux/irq.h>
38 #include <linux/delay.h>
39 #include <asm/byteorder.h>
40 #include <linux/time.h>
41 #include <linux/ethtool.h>
42 #include <linux/mii.h>
43 #include <linux/if_vlan.h>
47 #include <net/checksum.h>
48 #include <net/ip6_checksum.h>
49 #include <linux/workqueue.h>
50 #include <linux/crc32.h>
51 #include <linux/crc32c.h>
52 #include <linux/prefetch.h>
53 #include <linux/zlib.h>
55 #include <linux/semaphore.h>
56 #include <linux/stringify.h>
57 #include <linux/vmalloc.h>
60 #include "bnx2x_init.h"
61 #include "bnx2x_init_ops.h"
62 #include "bnx2x_cmn.h"
63 #include "bnx2x_vfpf.h"
64 #include "bnx2x_dcb.h"
67 #include <linux/firmware.h>
68 #include "bnx2x_fw_file_hdr.h"
70 #define FW_FILE_VERSION \
71 __stringify(BCM_5710_FW_MAJOR_VERSION) "." \
72 __stringify(BCM_5710_FW_MINOR_VERSION) "." \
73 __stringify(BCM_5710_FW_REVISION_VERSION) "." \
74 __stringify(BCM_5710_FW_ENGINEERING_VERSION)
75 #define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw"
76 #define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw"
77 #define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
79 /* Time in jiffies before concluding the transmitter is hung */
80 #define TX_TIMEOUT (5*HZ)
82 static char version
[] =
83 "Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver "
84 DRV_MODULE_NAME
" " DRV_MODULE_VERSION
" (" DRV_MODULE_RELDATE
")\n";
86 MODULE_AUTHOR("Eliezer Tamir");
87 MODULE_DESCRIPTION("Broadcom NetXtreme II "
88 "BCM57710/57711/57711E/"
89 "57712/57712_MF/57800/57800_MF/57810/57810_MF/"
90 "57840/57840_MF Driver");
91 MODULE_LICENSE("GPL");
92 MODULE_VERSION(DRV_MODULE_VERSION
);
93 MODULE_FIRMWARE(FW_FILE_NAME_E1
);
94 MODULE_FIRMWARE(FW_FILE_NAME_E1H
);
95 MODULE_FIRMWARE(FW_FILE_NAME_E2
);
98 module_param_named(num_queues
, bnx2x_num_queues
, int, S_IRUGO
);
99 MODULE_PARM_DESC(num_queues
,
100 " Set number of queues (default is as a number of CPUs)");
102 static int disable_tpa
;
103 module_param(disable_tpa
, int, S_IRUGO
);
104 MODULE_PARM_DESC(disable_tpa
, " Disable the TPA (LRO) feature");
107 module_param(int_mode
, int, S_IRUGO
);
108 MODULE_PARM_DESC(int_mode
, " Force interrupt mode other than MSI-X "
111 static int dropless_fc
;
112 module_param(dropless_fc
, int, S_IRUGO
);
113 MODULE_PARM_DESC(dropless_fc
, " Pause on exhausted host ring");
115 static int mrrs
= -1;
116 module_param(mrrs
, int, S_IRUGO
);
117 MODULE_PARM_DESC(mrrs
, " Force Max Read Req Size (0..3) (for debug)");
120 module_param(debug
, int, S_IRUGO
);
121 MODULE_PARM_DESC(debug
, " Default debug msglevel");
123 static struct workqueue_struct
*bnx2x_wq
;
124 struct workqueue_struct
*bnx2x_iov_wq
;
126 struct bnx2x_mac_vals
{
137 enum bnx2x_board_type
{
161 /* indexed by board_type, above */
165 [BCM57710
] = { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" },
166 [BCM57711
] = { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" },
167 [BCM57711E
] = { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" },
168 [BCM57712
] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" },
169 [BCM57712_MF
] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" },
170 [BCM57712_VF
] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" },
171 [BCM57800
] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" },
172 [BCM57800_MF
] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" },
173 [BCM57800_VF
] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" },
174 [BCM57810
] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
175 [BCM57810_MF
] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
176 [BCM57810_VF
] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" },
177 [BCM57840_4_10
] = { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" },
178 [BCM57840_2_20
] = { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" },
179 [BCM57840_MF
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
180 [BCM57840_VF
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" },
181 [BCM57811
] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" },
182 [BCM57811_MF
] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" },
183 [BCM57840_O
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
184 [BCM57840_MFO
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
185 [BCM57811_VF
] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }
188 #ifndef PCI_DEVICE_ID_NX2_57710
189 #define PCI_DEVICE_ID_NX2_57710 CHIP_NUM_57710
191 #ifndef PCI_DEVICE_ID_NX2_57711
192 #define PCI_DEVICE_ID_NX2_57711 CHIP_NUM_57711
194 #ifndef PCI_DEVICE_ID_NX2_57711E
195 #define PCI_DEVICE_ID_NX2_57711E CHIP_NUM_57711E
197 #ifndef PCI_DEVICE_ID_NX2_57712
198 #define PCI_DEVICE_ID_NX2_57712 CHIP_NUM_57712
200 #ifndef PCI_DEVICE_ID_NX2_57712_MF
201 #define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF
203 #ifndef PCI_DEVICE_ID_NX2_57712_VF
204 #define PCI_DEVICE_ID_NX2_57712_VF CHIP_NUM_57712_VF
206 #ifndef PCI_DEVICE_ID_NX2_57800
207 #define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800
209 #ifndef PCI_DEVICE_ID_NX2_57800_MF
210 #define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF
212 #ifndef PCI_DEVICE_ID_NX2_57800_VF
213 #define PCI_DEVICE_ID_NX2_57800_VF CHIP_NUM_57800_VF
215 #ifndef PCI_DEVICE_ID_NX2_57810
216 #define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810
218 #ifndef PCI_DEVICE_ID_NX2_57810_MF
219 #define PCI_DEVICE_ID_NX2_57810_MF CHIP_NUM_57810_MF
221 #ifndef PCI_DEVICE_ID_NX2_57840_O
222 #define PCI_DEVICE_ID_NX2_57840_O CHIP_NUM_57840_OBSOLETE
224 #ifndef PCI_DEVICE_ID_NX2_57810_VF
225 #define PCI_DEVICE_ID_NX2_57810_VF CHIP_NUM_57810_VF
227 #ifndef PCI_DEVICE_ID_NX2_57840_4_10
228 #define PCI_DEVICE_ID_NX2_57840_4_10 CHIP_NUM_57840_4_10
230 #ifndef PCI_DEVICE_ID_NX2_57840_2_20
231 #define PCI_DEVICE_ID_NX2_57840_2_20 CHIP_NUM_57840_2_20
233 #ifndef PCI_DEVICE_ID_NX2_57840_MFO
234 #define PCI_DEVICE_ID_NX2_57840_MFO CHIP_NUM_57840_MF_OBSOLETE
236 #ifndef PCI_DEVICE_ID_NX2_57840_MF
237 #define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF
239 #ifndef PCI_DEVICE_ID_NX2_57840_VF
240 #define PCI_DEVICE_ID_NX2_57840_VF CHIP_NUM_57840_VF
242 #ifndef PCI_DEVICE_ID_NX2_57811
243 #define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811
245 #ifndef PCI_DEVICE_ID_NX2_57811_MF
246 #define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF
248 #ifndef PCI_DEVICE_ID_NX2_57811_VF
249 #define PCI_DEVICE_ID_NX2_57811_VF CHIP_NUM_57811_VF
252 static const struct pci_device_id bnx2x_pci_tbl
[] = {
253 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57710
), BCM57710
},
254 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57711
), BCM57711
},
255 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57711E
), BCM57711E
},
256 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57712
), BCM57712
},
257 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57712_MF
), BCM57712_MF
},
258 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57712_VF
), BCM57712_VF
},
259 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57800
), BCM57800
},
260 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57800_MF
), BCM57800_MF
},
261 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57800_VF
), BCM57800_VF
},
262 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57810
), BCM57810
},
263 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57810_MF
), BCM57810_MF
},
264 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_O
), BCM57840_O
},
265 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_4_10
), BCM57840_4_10
},
266 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_2_20
), BCM57840_2_20
},
267 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57810_VF
), BCM57810_VF
},
268 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_MFO
), BCM57840_MFO
},
269 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_MF
), BCM57840_MF
},
270 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57840_VF
), BCM57840_VF
},
271 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57811
), BCM57811
},
272 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57811_MF
), BCM57811_MF
},
273 { PCI_VDEVICE(BROADCOM
, PCI_DEVICE_ID_NX2_57811_VF
), BCM57811_VF
},
277 MODULE_DEVICE_TABLE(pci
, bnx2x_pci_tbl
);
279 /* Global resources for unloading a previously loaded device */
280 #define BNX2X_PREV_WAIT_NEEDED 1
281 static DEFINE_SEMAPHORE(bnx2x_prev_sem
);
282 static LIST_HEAD(bnx2x_prev_list
);
284 /* Forward declaration */
285 static struct cnic_eth_dev
*bnx2x_cnic_probe(struct net_device
*dev
);
286 static u32
bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath
*fp
);
287 static int bnx2x_set_storm_rx_mode(struct bnx2x
*bp
);
289 /****************************************************************************
290 * General service functions
291 ****************************************************************************/
293 static void __storm_memset_dma_mapping(struct bnx2x
*bp
,
294 u32 addr
, dma_addr_t mapping
)
296 REG_WR(bp
, addr
, U64_LO(mapping
));
297 REG_WR(bp
, addr
+ 4, U64_HI(mapping
));
300 static void storm_memset_spq_addr(struct bnx2x
*bp
,
301 dma_addr_t mapping
, u16 abs_fid
)
303 u32 addr
= XSEM_REG_FAST_MEMORY
+
304 XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid
);
306 __storm_memset_dma_mapping(bp
, addr
, mapping
);
309 static void storm_memset_vf_to_pf(struct bnx2x
*bp
, u16 abs_fid
,
312 REG_WR8(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_VF_TO_PF_OFFSET(abs_fid
),
314 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+ CSTORM_VF_TO_PF_OFFSET(abs_fid
),
316 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+ TSTORM_VF_TO_PF_OFFSET(abs_fid
),
318 REG_WR8(bp
, BAR_USTRORM_INTMEM
+ USTORM_VF_TO_PF_OFFSET(abs_fid
),
322 static void storm_memset_func_en(struct bnx2x
*bp
, u16 abs_fid
,
325 REG_WR8(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_FUNC_EN_OFFSET(abs_fid
),
327 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+ CSTORM_FUNC_EN_OFFSET(abs_fid
),
329 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+ TSTORM_FUNC_EN_OFFSET(abs_fid
),
331 REG_WR8(bp
, BAR_USTRORM_INTMEM
+ USTORM_FUNC_EN_OFFSET(abs_fid
),
335 static void storm_memset_eq_data(struct bnx2x
*bp
,
336 struct event_ring_data
*eq_data
,
339 size_t size
= sizeof(struct event_ring_data
);
341 u32 addr
= BAR_CSTRORM_INTMEM
+ CSTORM_EVENT_RING_DATA_OFFSET(pfid
);
343 __storm_memset_struct(bp
, addr
, size
, (u32
*)eq_data
);
346 static void storm_memset_eq_prod(struct bnx2x
*bp
, u16 eq_prod
,
349 u32 addr
= BAR_CSTRORM_INTMEM
+ CSTORM_EVENT_RING_PROD_OFFSET(pfid
);
350 REG_WR16(bp
, addr
, eq_prod
);
354 * locking is done by mcp
356 static void bnx2x_reg_wr_ind(struct bnx2x
*bp
, u32 addr
, u32 val
)
358 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
, addr
);
359 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_DATA
, val
);
360 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
,
361 PCICFG_VENDOR_ID_OFFSET
);
364 static u32
bnx2x_reg_rd_ind(struct bnx2x
*bp
, u32 addr
)
368 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
, addr
);
369 pci_read_config_dword(bp
->pdev
, PCICFG_GRC_DATA
, &val
);
370 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
,
371 PCICFG_VENDOR_ID_OFFSET
);
376 #define DMAE_DP_SRC_GRC "grc src_addr [%08x]"
377 #define DMAE_DP_SRC_PCI "pci src_addr [%x:%08x]"
378 #define DMAE_DP_DST_GRC "grc dst_addr [%08x]"
379 #define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]"
380 #define DMAE_DP_DST_NONE "dst_addr [none]"
382 static void bnx2x_dp_dmae(struct bnx2x
*bp
,
383 struct dmae_command
*dmae
, int msglvl
)
385 u32 src_type
= dmae
->opcode
& DMAE_COMMAND_SRC
;
388 switch (dmae
->opcode
& DMAE_COMMAND_DST
) {
389 case DMAE_CMD_DST_PCI
:
390 if (src_type
== DMAE_CMD_SRC_PCI
)
391 DP(msglvl
, "DMAE: opcode 0x%08x\n"
392 "src [%x:%08x], len [%d*4], dst [%x:%08x]\n"
393 "comp_addr [%x:%08x], comp_val 0x%08x\n",
394 dmae
->opcode
, dmae
->src_addr_hi
, dmae
->src_addr_lo
,
395 dmae
->len
, dmae
->dst_addr_hi
, dmae
->dst_addr_lo
,
396 dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
399 DP(msglvl
, "DMAE: opcode 0x%08x\n"
400 "src [%08x], len [%d*4], dst [%x:%08x]\n"
401 "comp_addr [%x:%08x], comp_val 0x%08x\n",
402 dmae
->opcode
, dmae
->src_addr_lo
>> 2,
403 dmae
->len
, dmae
->dst_addr_hi
, dmae
->dst_addr_lo
,
404 dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
407 case DMAE_CMD_DST_GRC
:
408 if (src_type
== DMAE_CMD_SRC_PCI
)
409 DP(msglvl
, "DMAE: opcode 0x%08x\n"
410 "src [%x:%08x], len [%d*4], dst_addr [%08x]\n"
411 "comp_addr [%x:%08x], comp_val 0x%08x\n",
412 dmae
->opcode
, dmae
->src_addr_hi
, dmae
->src_addr_lo
,
413 dmae
->len
, dmae
->dst_addr_lo
>> 2,
414 dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
417 DP(msglvl
, "DMAE: opcode 0x%08x\n"
418 "src [%08x], len [%d*4], dst [%08x]\n"
419 "comp_addr [%x:%08x], comp_val 0x%08x\n",
420 dmae
->opcode
, dmae
->src_addr_lo
>> 2,
421 dmae
->len
, dmae
->dst_addr_lo
>> 2,
422 dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
426 if (src_type
== DMAE_CMD_SRC_PCI
)
427 DP(msglvl
, "DMAE: opcode 0x%08x\n"
428 "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n"
429 "comp_addr [%x:%08x] comp_val 0x%08x\n",
430 dmae
->opcode
, dmae
->src_addr_hi
, dmae
->src_addr_lo
,
431 dmae
->len
, dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
434 DP(msglvl
, "DMAE: opcode 0x%08x\n"
435 "src_addr [%08x] len [%d * 4] dst_addr [none]\n"
436 "comp_addr [%x:%08x] comp_val 0x%08x\n",
437 dmae
->opcode
, dmae
->src_addr_lo
>> 2,
438 dmae
->len
, dmae
->comp_addr_hi
, dmae
->comp_addr_lo
,
443 for (i
= 0; i
< (sizeof(struct dmae_command
)/4); i
++)
444 DP(msglvl
, "DMAE RAW [%02d]: 0x%08x\n",
445 i
, *(((u32
*)dmae
) + i
));
448 /* copy command into DMAE command memory and set DMAE command go */
449 void bnx2x_post_dmae(struct bnx2x
*bp
, struct dmae_command
*dmae
, int idx
)
454 cmd_offset
= (DMAE_REG_CMD_MEM
+ sizeof(struct dmae_command
) * idx
);
455 for (i
= 0; i
< (sizeof(struct dmae_command
)/4); i
++) {
456 REG_WR(bp
, cmd_offset
+ i
*4, *(((u32
*)dmae
) + i
));
458 REG_WR(bp
, dmae_reg_go_c
[idx
], 1);
461 u32
bnx2x_dmae_opcode_add_comp(u32 opcode
, u8 comp_type
)
463 return opcode
| ((comp_type
<< DMAE_COMMAND_C_DST_SHIFT
) |
467 u32
bnx2x_dmae_opcode_clr_src_reset(u32 opcode
)
469 return opcode
& ~DMAE_CMD_SRC_RESET
;
472 u32
bnx2x_dmae_opcode(struct bnx2x
*bp
, u8 src_type
, u8 dst_type
,
473 bool with_comp
, u8 comp_type
)
477 opcode
|= ((src_type
<< DMAE_COMMAND_SRC_SHIFT
) |
478 (dst_type
<< DMAE_COMMAND_DST_SHIFT
));
480 opcode
|= (DMAE_CMD_SRC_RESET
| DMAE_CMD_DST_RESET
);
482 opcode
|= (BP_PORT(bp
) ? DMAE_CMD_PORT_1
: DMAE_CMD_PORT_0
);
483 opcode
|= ((BP_VN(bp
) << DMAE_CMD_E1HVN_SHIFT
) |
484 (BP_VN(bp
) << DMAE_COMMAND_DST_VN_SHIFT
));
485 opcode
|= (DMAE_COM_SET_ERR
<< DMAE_COMMAND_ERR_POLICY_SHIFT
);
488 opcode
|= DMAE_CMD_ENDIANITY_B_DW_SWAP
;
490 opcode
|= DMAE_CMD_ENDIANITY_DW_SWAP
;
493 opcode
= bnx2x_dmae_opcode_add_comp(opcode
, comp_type
);
497 void bnx2x_prep_dmae_with_comp(struct bnx2x
*bp
,
498 struct dmae_command
*dmae
,
499 u8 src_type
, u8 dst_type
)
501 memset(dmae
, 0, sizeof(struct dmae_command
));
504 dmae
->opcode
= bnx2x_dmae_opcode(bp
, src_type
, dst_type
,
505 true, DMAE_COMP_PCI
);
507 /* fill in the completion parameters */
508 dmae
->comp_addr_lo
= U64_LO(bnx2x_sp_mapping(bp
, wb_comp
));
509 dmae
->comp_addr_hi
= U64_HI(bnx2x_sp_mapping(bp
, wb_comp
));
510 dmae
->comp_val
= DMAE_COMP_VAL
;
513 /* issue a dmae command over the init-channel and wait for completion */
514 int bnx2x_issue_dmae_with_comp(struct bnx2x
*bp
, struct dmae_command
*dmae
,
517 int cnt
= CHIP_REV_IS_SLOW(bp
) ? (400000) : 4000;
520 bnx2x_dp_dmae(bp
, dmae
, BNX2X_MSG_DMAE
);
522 /* Lock the dmae channel. Disable BHs to prevent a dead-lock
523 * as long as this code is called both from syscall context and
524 * from ndo_set_rx_mode() flow that may be called from BH.
526 spin_lock_bh(&bp
->dmae_lock
);
528 /* reset completion */
531 /* post the command on the channel used for initializations */
532 bnx2x_post_dmae(bp
, dmae
, INIT_DMAE_C(bp
));
534 /* wait for completion */
536 while ((*comp
& ~DMAE_PCI_ERR_FLAG
) != DMAE_COMP_VAL
) {
539 (bp
->recovery_state
!= BNX2X_RECOVERY_DONE
&&
540 bp
->recovery_state
!= BNX2X_RECOVERY_NIC_LOADING
)) {
541 BNX2X_ERR("DMAE timeout!\n");
548 if (*comp
& DMAE_PCI_ERR_FLAG
) {
549 BNX2X_ERR("DMAE PCI error!\n");
554 spin_unlock_bh(&bp
->dmae_lock
);
558 void bnx2x_write_dmae(struct bnx2x
*bp
, dma_addr_t dma_addr
, u32 dst_addr
,
562 struct dmae_command dmae
;
564 if (!bp
->dmae_ready
) {
565 u32
*data
= bnx2x_sp(bp
, wb_data
[0]);
568 bnx2x_init_ind_wr(bp
, dst_addr
, data
, len32
);
570 bnx2x_init_str_wr(bp
, dst_addr
, data
, len32
);
574 /* set opcode and fixed command fields */
575 bnx2x_prep_dmae_with_comp(bp
, &dmae
, DMAE_SRC_PCI
, DMAE_DST_GRC
);
577 /* fill in addresses and len */
578 dmae
.src_addr_lo
= U64_LO(dma_addr
);
579 dmae
.src_addr_hi
= U64_HI(dma_addr
);
580 dmae
.dst_addr_lo
= dst_addr
>> 2;
581 dmae
.dst_addr_hi
= 0;
584 /* issue the command and wait for completion */
585 rc
= bnx2x_issue_dmae_with_comp(bp
, &dmae
, bnx2x_sp(bp
, wb_comp
));
587 BNX2X_ERR("DMAE returned failure %d\n", rc
);
588 #ifdef BNX2X_STOP_ON_ERROR
594 void bnx2x_read_dmae(struct bnx2x
*bp
, u32 src_addr
, u32 len32
)
597 struct dmae_command dmae
;
599 if (!bp
->dmae_ready
) {
600 u32
*data
= bnx2x_sp(bp
, wb_data
[0]);
604 for (i
= 0; i
< len32
; i
++)
605 data
[i
] = bnx2x_reg_rd_ind(bp
, src_addr
+ i
*4);
607 for (i
= 0; i
< len32
; i
++)
608 data
[i
] = REG_RD(bp
, src_addr
+ i
*4);
613 /* set opcode and fixed command fields */
614 bnx2x_prep_dmae_with_comp(bp
, &dmae
, DMAE_SRC_GRC
, DMAE_DST_PCI
);
616 /* fill in addresses and len */
617 dmae
.src_addr_lo
= src_addr
>> 2;
618 dmae
.src_addr_hi
= 0;
619 dmae
.dst_addr_lo
= U64_LO(bnx2x_sp_mapping(bp
, wb_data
));
620 dmae
.dst_addr_hi
= U64_HI(bnx2x_sp_mapping(bp
, wb_data
));
623 /* issue the command and wait for completion */
624 rc
= bnx2x_issue_dmae_with_comp(bp
, &dmae
, bnx2x_sp(bp
, wb_comp
));
626 BNX2X_ERR("DMAE returned failure %d\n", rc
);
627 #ifdef BNX2X_STOP_ON_ERROR
633 static void bnx2x_write_dmae_phys_len(struct bnx2x
*bp
, dma_addr_t phys_addr
,
636 int dmae_wr_max
= DMAE_LEN32_WR_MAX(bp
);
639 while (len
> dmae_wr_max
) {
640 bnx2x_write_dmae(bp
, phys_addr
+ offset
,
641 addr
+ offset
, dmae_wr_max
);
642 offset
+= dmae_wr_max
* 4;
646 bnx2x_write_dmae(bp
, phys_addr
+ offset
, addr
+ offset
, len
);
649 static int bnx2x_mc_assert(struct bnx2x
*bp
)
653 u32 row0
, row1
, row2
, row3
;
656 last_idx
= REG_RD8(bp
, BAR_XSTRORM_INTMEM
+
657 XSTORM_ASSERT_LIST_INDEX_OFFSET
);
659 BNX2X_ERR("XSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx
);
661 /* print the asserts */
662 for (i
= 0; i
< STROM_ASSERT_ARRAY_SIZE
; i
++) {
664 row0
= REG_RD(bp
, BAR_XSTRORM_INTMEM
+
665 XSTORM_ASSERT_LIST_OFFSET(i
));
666 row1
= REG_RD(bp
, BAR_XSTRORM_INTMEM
+
667 XSTORM_ASSERT_LIST_OFFSET(i
) + 4);
668 row2
= REG_RD(bp
, BAR_XSTRORM_INTMEM
+
669 XSTORM_ASSERT_LIST_OFFSET(i
) + 8);
670 row3
= REG_RD(bp
, BAR_XSTRORM_INTMEM
+
671 XSTORM_ASSERT_LIST_OFFSET(i
) + 12);
673 if (row0
!= COMMON_ASM_INVALID_ASSERT_OPCODE
) {
674 BNX2X_ERR("XSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
675 i
, row3
, row2
, row1
, row0
);
683 last_idx
= REG_RD8(bp
, BAR_TSTRORM_INTMEM
+
684 TSTORM_ASSERT_LIST_INDEX_OFFSET
);
686 BNX2X_ERR("TSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx
);
688 /* print the asserts */
689 for (i
= 0; i
< STROM_ASSERT_ARRAY_SIZE
; i
++) {
691 row0
= REG_RD(bp
, BAR_TSTRORM_INTMEM
+
692 TSTORM_ASSERT_LIST_OFFSET(i
));
693 row1
= REG_RD(bp
, BAR_TSTRORM_INTMEM
+
694 TSTORM_ASSERT_LIST_OFFSET(i
) + 4);
695 row2
= REG_RD(bp
, BAR_TSTRORM_INTMEM
+
696 TSTORM_ASSERT_LIST_OFFSET(i
) + 8);
697 row3
= REG_RD(bp
, BAR_TSTRORM_INTMEM
+
698 TSTORM_ASSERT_LIST_OFFSET(i
) + 12);
700 if (row0
!= COMMON_ASM_INVALID_ASSERT_OPCODE
) {
701 BNX2X_ERR("TSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
702 i
, row3
, row2
, row1
, row0
);
710 last_idx
= REG_RD8(bp
, BAR_CSTRORM_INTMEM
+
711 CSTORM_ASSERT_LIST_INDEX_OFFSET
);
713 BNX2X_ERR("CSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx
);
715 /* print the asserts */
716 for (i
= 0; i
< STROM_ASSERT_ARRAY_SIZE
; i
++) {
718 row0
= REG_RD(bp
, BAR_CSTRORM_INTMEM
+
719 CSTORM_ASSERT_LIST_OFFSET(i
));
720 row1
= REG_RD(bp
, BAR_CSTRORM_INTMEM
+
721 CSTORM_ASSERT_LIST_OFFSET(i
) + 4);
722 row2
= REG_RD(bp
, BAR_CSTRORM_INTMEM
+
723 CSTORM_ASSERT_LIST_OFFSET(i
) + 8);
724 row3
= REG_RD(bp
, BAR_CSTRORM_INTMEM
+
725 CSTORM_ASSERT_LIST_OFFSET(i
) + 12);
727 if (row0
!= COMMON_ASM_INVALID_ASSERT_OPCODE
) {
728 BNX2X_ERR("CSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
729 i
, row3
, row2
, row1
, row0
);
737 last_idx
= REG_RD8(bp
, BAR_USTRORM_INTMEM
+
738 USTORM_ASSERT_LIST_INDEX_OFFSET
);
740 BNX2X_ERR("USTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx
);
742 /* print the asserts */
743 for (i
= 0; i
< STROM_ASSERT_ARRAY_SIZE
; i
++) {
745 row0
= REG_RD(bp
, BAR_USTRORM_INTMEM
+
746 USTORM_ASSERT_LIST_OFFSET(i
));
747 row1
= REG_RD(bp
, BAR_USTRORM_INTMEM
+
748 USTORM_ASSERT_LIST_OFFSET(i
) + 4);
749 row2
= REG_RD(bp
, BAR_USTRORM_INTMEM
+
750 USTORM_ASSERT_LIST_OFFSET(i
) + 8);
751 row3
= REG_RD(bp
, BAR_USTRORM_INTMEM
+
752 USTORM_ASSERT_LIST_OFFSET(i
) + 12);
754 if (row0
!= COMMON_ASM_INVALID_ASSERT_OPCODE
) {
755 BNX2X_ERR("USTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
756 i
, row3
, row2
, row1
, row0
);
766 #define MCPR_TRACE_BUFFER_SIZE (0x800)
767 #define SCRATCH_BUFFER_SIZE(bp) \
768 (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000))
770 void bnx2x_fw_dump_lvl(struct bnx2x
*bp
, const char *lvl
)
776 u32 trace_shmem_base
;
778 BNX2X_ERR("NO MCP - can not dump\n");
781 netdev_printk(lvl
, bp
->dev
, "bc %d.%d.%d\n",
782 (bp
->common
.bc_ver
& 0xff0000) >> 16,
783 (bp
->common
.bc_ver
& 0xff00) >> 8,
784 (bp
->common
.bc_ver
& 0xff));
786 val
= REG_RD(bp
, MCP_REG_MCPR_CPU_PROGRAM_COUNTER
);
787 if (val
== REG_RD(bp
, MCP_REG_MCPR_CPU_PROGRAM_COUNTER
))
788 BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl
, val
);
790 if (BP_PATH(bp
) == 0)
791 trace_shmem_base
= bp
->common
.shmem_base
;
793 trace_shmem_base
= SHMEM2_RD(bp
, other_shmem_base_addr
);
796 if (trace_shmem_base
< MCPR_SCRATCH_BASE(bp
) + MCPR_TRACE_BUFFER_SIZE
||
797 trace_shmem_base
>= MCPR_SCRATCH_BASE(bp
) +
798 SCRATCH_BUFFER_SIZE(bp
)) {
799 BNX2X_ERR("Unable to dump trace buffer (mark %x)\n",
804 addr
= trace_shmem_base
- MCPR_TRACE_BUFFER_SIZE
;
806 /* validate TRCB signature */
807 mark
= REG_RD(bp
, addr
);
808 if (mark
!= MFW_TRACE_SIGNATURE
) {
809 BNX2X_ERR("Trace buffer signature is missing.");
813 /* read cyclic buffer pointer */
815 mark
= REG_RD(bp
, addr
);
816 mark
= MCPR_SCRATCH_BASE(bp
) + ((mark
+ 0x3) & ~0x3) - 0x08000000;
817 if (mark
>= trace_shmem_base
|| mark
< addr
+ 4) {
818 BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n");
821 printk("%s" "begin fw dump (mark 0x%x)\n", lvl
, mark
);
825 /* dump buffer after the mark */
826 for (offset
= mark
; offset
< trace_shmem_base
; offset
+= 0x8*4) {
827 for (word
= 0; word
< 8; word
++)
828 data
[word
] = htonl(REG_RD(bp
, offset
+ 4*word
));
830 pr_cont("%s", (char *)data
);
833 /* dump buffer before the mark */
834 for (offset
= addr
+ 4; offset
<= mark
; offset
+= 0x8*4) {
835 for (word
= 0; word
< 8; word
++)
836 data
[word
] = htonl(REG_RD(bp
, offset
+ 4*word
));
838 pr_cont("%s", (char *)data
);
840 printk("%s" "end of fw dump\n", lvl
);
843 static void bnx2x_fw_dump(struct bnx2x
*bp
)
845 bnx2x_fw_dump_lvl(bp
, KERN_ERR
);
848 static void bnx2x_hc_int_disable(struct bnx2x
*bp
)
850 int port
= BP_PORT(bp
);
851 u32 addr
= port
? HC_REG_CONFIG_1
: HC_REG_CONFIG_0
;
852 u32 val
= REG_RD(bp
, addr
);
854 /* in E1 we must use only PCI configuration space to disable
855 * MSI/MSIX capability
856 * It's forbidden to disable IGU_PF_CONF_MSI_MSIX_EN in HC block
858 if (CHIP_IS_E1(bp
)) {
859 /* Since IGU_PF_CONF_MSI_MSIX_EN still always on
860 * Use mask register to prevent from HC sending interrupts
861 * after we exit the function
863 REG_WR(bp
, HC_REG_INT_MASK
+ port
*4, 0);
865 val
&= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
866 HC_CONFIG_0_REG_INT_LINE_EN_0
|
867 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
869 val
&= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
870 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
|
871 HC_CONFIG_0_REG_INT_LINE_EN_0
|
872 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
875 "write %x to HC %d (addr 0x%x)\n",
878 /* flush all outstanding writes */
881 REG_WR(bp
, addr
, val
);
882 if (REG_RD(bp
, addr
) != val
)
883 BNX2X_ERR("BUG! Proper val not read from IGU!\n");
886 static void bnx2x_igu_int_disable(struct bnx2x
*bp
)
888 u32 val
= REG_RD(bp
, IGU_REG_PF_CONFIGURATION
);
890 val
&= ~(IGU_PF_CONF_MSI_MSIX_EN
|
891 IGU_PF_CONF_INT_LINE_EN
|
892 IGU_PF_CONF_ATTN_BIT_EN
);
894 DP(NETIF_MSG_IFDOWN
, "write %x to IGU\n", val
);
896 /* flush all outstanding writes */
899 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, val
);
900 if (REG_RD(bp
, IGU_REG_PF_CONFIGURATION
) != val
)
901 BNX2X_ERR("BUG! Proper val not read from IGU!\n");
904 static void bnx2x_int_disable(struct bnx2x
*bp
)
906 if (bp
->common
.int_block
== INT_BLOCK_HC
)
907 bnx2x_hc_int_disable(bp
);
909 bnx2x_igu_int_disable(bp
);
912 void bnx2x_panic_dump(struct bnx2x
*bp
, bool disable_int
)
916 struct hc_sp_status_block_data sp_sb_data
;
917 int func
= BP_FUNC(bp
);
918 #ifdef BNX2X_STOP_ON_ERROR
919 u16 start
= 0, end
= 0;
922 if (IS_PF(bp
) && disable_int
)
923 bnx2x_int_disable(bp
);
925 bp
->stats_state
= STATS_STATE_DISABLED
;
926 bp
->eth_stats
.unrecoverable_error
++;
927 DP(BNX2X_MSG_STATS
, "stats_state - DISABLED\n");
929 BNX2X_ERR("begin crash dump -----------------\n");
934 struct host_sp_status_block
*def_sb
= bp
->def_status_blk
;
935 int data_size
, cstorm_offset
;
937 BNX2X_ERR("def_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x) spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n",
938 bp
->def_idx
, bp
->def_att_idx
, bp
->attn_state
,
939 bp
->spq_prod_idx
, bp
->stats_counter
);
940 BNX2X_ERR("DSB: attn bits(0x%x) ack(0x%x) id(0x%x) idx(0x%x)\n",
941 def_sb
->atten_status_block
.attn_bits
,
942 def_sb
->atten_status_block
.attn_bits_ack
,
943 def_sb
->atten_status_block
.status_block_id
,
944 def_sb
->atten_status_block
.attn_bits_index
);
946 for (i
= 0; i
< HC_SP_SB_MAX_INDICES
; i
++)
948 def_sb
->sp_sb
.index_values
[i
],
949 (i
== HC_SP_SB_MAX_INDICES
- 1) ? ") " : " ");
951 data_size
= sizeof(struct hc_sp_status_block_data
) /
953 cstorm_offset
= CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func
);
954 for (i
= 0; i
< data_size
; i
++)
955 *((u32
*)&sp_sb_data
+ i
) =
956 REG_RD(bp
, BAR_CSTRORM_INTMEM
+ cstorm_offset
+
959 pr_cont("igu_sb_id(0x%x) igu_seg_id(0x%x) pf_id(0x%x) vnic_id(0x%x) vf_id(0x%x) vf_valid (0x%x) state(0x%x)\n",
960 sp_sb_data
.igu_sb_id
,
961 sp_sb_data
.igu_seg_id
,
962 sp_sb_data
.p_func
.pf_id
,
963 sp_sb_data
.p_func
.vnic_id
,
964 sp_sb_data
.p_func
.vf_id
,
965 sp_sb_data
.p_func
.vf_valid
,
969 for_each_eth_queue(bp
, i
) {
970 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
972 struct hc_status_block_data_e2 sb_data_e2
;
973 struct hc_status_block_data_e1x sb_data_e1x
;
974 struct hc_status_block_sm
*hc_sm_p
=
976 sb_data_e1x
.common
.state_machine
:
977 sb_data_e2
.common
.state_machine
;
978 struct hc_index_data
*hc_index_p
=
980 sb_data_e1x
.index_data
:
981 sb_data_e2
.index_data
;
984 struct bnx2x_fp_txdata txdata
;
987 BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x) rx_comp_prod(0x%x) rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n",
988 i
, fp
->rx_bd_prod
, fp
->rx_bd_cons
,
990 fp
->rx_comp_cons
, le16_to_cpu(*fp
->rx_cons_sb
));
991 BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x) fp_hc_idx(0x%x)\n",
992 fp
->rx_sge_prod
, fp
->last_max_sge
,
993 le16_to_cpu(fp
->fp_hc_idx
));
996 for_each_cos_in_tx_queue(fp
, cos
)
998 txdata
= *fp
->txdata_ptr
[cos
];
999 BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x) tx_bd_prod(0x%x) tx_bd_cons(0x%x) *tx_cons_sb(0x%x)\n",
1000 i
, txdata
.tx_pkt_prod
,
1001 txdata
.tx_pkt_cons
, txdata
.tx_bd_prod
,
1003 le16_to_cpu(*txdata
.tx_cons_sb
));
1006 loop
= CHIP_IS_E1x(bp
) ?
1007 HC_SB_MAX_INDICES_E1X
: HC_SB_MAX_INDICES_E2
;
1014 BNX2X_ERR(" run indexes (");
1015 for (j
= 0; j
< HC_SB_MAX_SM
; j
++)
1017 fp
->sb_running_index
[j
],
1018 (j
== HC_SB_MAX_SM
- 1) ? ")" : " ");
1020 BNX2X_ERR(" indexes (");
1021 for (j
= 0; j
< loop
; j
++)
1023 fp
->sb_index_values
[j
],
1024 (j
== loop
- 1) ? ")" : " ");
1026 /* VF cannot access FW refelection for status block */
1031 data_size
= CHIP_IS_E1x(bp
) ?
1032 sizeof(struct hc_status_block_data_e1x
) :
1033 sizeof(struct hc_status_block_data_e2
);
1034 data_size
/= sizeof(u32
);
1035 sb_data_p
= CHIP_IS_E1x(bp
) ?
1036 (u32
*)&sb_data_e1x
:
1038 /* copy sb data in here */
1039 for (j
= 0; j
< data_size
; j
++)
1040 *(sb_data_p
+ j
) = REG_RD(bp
, BAR_CSTRORM_INTMEM
+
1041 CSTORM_STATUS_BLOCK_DATA_OFFSET(fp
->fw_sb_id
) +
1044 if (!CHIP_IS_E1x(bp
)) {
1045 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n",
1046 sb_data_e2
.common
.p_func
.pf_id
,
1047 sb_data_e2
.common
.p_func
.vf_id
,
1048 sb_data_e2
.common
.p_func
.vf_valid
,
1049 sb_data_e2
.common
.p_func
.vnic_id
,
1050 sb_data_e2
.common
.same_igu_sb_1b
,
1051 sb_data_e2
.common
.state
);
1053 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n",
1054 sb_data_e1x
.common
.p_func
.pf_id
,
1055 sb_data_e1x
.common
.p_func
.vf_id
,
1056 sb_data_e1x
.common
.p_func
.vf_valid
,
1057 sb_data_e1x
.common
.p_func
.vnic_id
,
1058 sb_data_e1x
.common
.same_igu_sb_1b
,
1059 sb_data_e1x
.common
.state
);
1063 for (j
= 0; j
< HC_SB_MAX_SM
; j
++) {
1064 pr_cont("SM[%d] __flags (0x%x) igu_sb_id (0x%x) igu_seg_id(0x%x) time_to_expire (0x%x) timer_value(0x%x)\n",
1065 j
, hc_sm_p
[j
].__flags
,
1066 hc_sm_p
[j
].igu_sb_id
,
1067 hc_sm_p
[j
].igu_seg_id
,
1068 hc_sm_p
[j
].time_to_expire
,
1069 hc_sm_p
[j
].timer_value
);
1073 for (j
= 0; j
< loop
; j
++) {
1074 pr_cont("INDEX[%d] flags (0x%x) timeout (0x%x)\n", j
,
1075 hc_index_p
[j
].flags
,
1076 hc_index_p
[j
].timeout
);
1080 #ifdef BNX2X_STOP_ON_ERROR
1083 BNX2X_ERR("eq cons %x prod %x\n", bp
->eq_cons
, bp
->eq_prod
);
1084 for (i
= 0; i
< NUM_EQ_DESC
; i
++) {
1085 u32
*data
= (u32
*)&bp
->eq_ring
[i
].message
.data
;
1087 BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n",
1088 i
, bp
->eq_ring
[i
].message
.opcode
,
1089 bp
->eq_ring
[i
].message
.error
);
1090 BNX2X_ERR("data: %x %x %x\n",
1091 data
[0], data
[1], data
[2]);
1097 for_each_valid_rx_queue(bp
, i
) {
1098 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
1100 start
= RX_BD(le16_to_cpu(*fp
->rx_cons_sb
) - 10);
1101 end
= RX_BD(le16_to_cpu(*fp
->rx_cons_sb
) + 503);
1102 for (j
= start
; j
!= end
; j
= RX_BD(j
+ 1)) {
1103 u32
*rx_bd
= (u32
*)&fp
->rx_desc_ring
[j
];
1104 struct sw_rx_bd
*sw_bd
= &fp
->rx_buf_ring
[j
];
1106 BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n",
1107 i
, j
, rx_bd
[1], rx_bd
[0], sw_bd
->data
);
1110 start
= RX_SGE(fp
->rx_sge_prod
);
1111 end
= RX_SGE(fp
->last_max_sge
);
1112 for (j
= start
; j
!= end
; j
= RX_SGE(j
+ 1)) {
1113 u32
*rx_sge
= (u32
*)&fp
->rx_sge_ring
[j
];
1114 struct sw_rx_page
*sw_page
= &fp
->rx_page_ring
[j
];
1116 BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n",
1117 i
, j
, rx_sge
[1], rx_sge
[0], sw_page
->page
);
1120 start
= RCQ_BD(fp
->rx_comp_cons
- 10);
1121 end
= RCQ_BD(fp
->rx_comp_cons
+ 503);
1122 for (j
= start
; j
!= end
; j
= RCQ_BD(j
+ 1)) {
1123 u32
*cqe
= (u32
*)&fp
->rx_comp_ring
[j
];
1125 BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n",
1126 i
, j
, cqe
[0], cqe
[1], cqe
[2], cqe
[3]);
1131 for_each_valid_tx_queue(bp
, i
) {
1132 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
1133 for_each_cos_in_tx_queue(fp
, cos
) {
1134 struct bnx2x_fp_txdata
*txdata
= fp
->txdata_ptr
[cos
];
1136 start
= TX_BD(le16_to_cpu(*txdata
->tx_cons_sb
) - 10);
1137 end
= TX_BD(le16_to_cpu(*txdata
->tx_cons_sb
) + 245);
1138 for (j
= start
; j
!= end
; j
= TX_BD(j
+ 1)) {
1139 struct sw_tx_bd
*sw_bd
=
1140 &txdata
->tx_buf_ring
[j
];
1142 BNX2X_ERR("fp%d: txdata %d, packet[%x]=[%p,%x]\n",
1143 i
, cos
, j
, sw_bd
->skb
,
1147 start
= TX_BD(txdata
->tx_bd_cons
- 10);
1148 end
= TX_BD(txdata
->tx_bd_cons
+ 254);
1149 for (j
= start
; j
!= end
; j
= TX_BD(j
+ 1)) {
1150 u32
*tx_bd
= (u32
*)&txdata
->tx_desc_ring
[j
];
1152 BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]=[%x:%x:%x:%x]\n",
1153 i
, cos
, j
, tx_bd
[0], tx_bd
[1],
1154 tx_bd
[2], tx_bd
[3]);
1161 bnx2x_mc_assert(bp
);
1163 BNX2X_ERR("end crash dump -----------------\n");
1167 * FLR Support for E2
1169 * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW
1172 #define FLR_WAIT_USEC 10000 /* 10 milliseconds */
1173 #define FLR_WAIT_INTERVAL 50 /* usec */
1174 #define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERVAL) /* 200 */
1176 struct pbf_pN_buf_regs
{
1183 struct pbf_pN_cmd_regs
{
1189 static void bnx2x_pbf_pN_buf_flushed(struct bnx2x
*bp
,
1190 struct pbf_pN_buf_regs
*regs
,
1193 u32 init_crd
, crd
, crd_start
, crd_freed
, crd_freed_start
;
1194 u32 cur_cnt
= poll_count
;
1196 crd_freed
= crd_freed_start
= REG_RD(bp
, regs
->crd_freed
);
1197 crd
= crd_start
= REG_RD(bp
, regs
->crd
);
1198 init_crd
= REG_RD(bp
, regs
->init_crd
);
1200 DP(BNX2X_MSG_SP
, "INIT CREDIT[%d] : %x\n", regs
->pN
, init_crd
);
1201 DP(BNX2X_MSG_SP
, "CREDIT[%d] : s:%x\n", regs
->pN
, crd
);
1202 DP(BNX2X_MSG_SP
, "CREDIT_FREED[%d]: s:%x\n", regs
->pN
, crd_freed
);
1204 while ((crd
!= init_crd
) && ((u32
)SUB_S32(crd_freed
, crd_freed_start
) <
1205 (init_crd
- crd_start
))) {
1207 udelay(FLR_WAIT_INTERVAL
);
1208 crd
= REG_RD(bp
, regs
->crd
);
1209 crd_freed
= REG_RD(bp
, regs
->crd_freed
);
1211 DP(BNX2X_MSG_SP
, "PBF tx buffer[%d] timed out\n",
1213 DP(BNX2X_MSG_SP
, "CREDIT[%d] : c:%x\n",
1215 DP(BNX2X_MSG_SP
, "CREDIT_FREED[%d]: c:%x\n",
1216 regs
->pN
, crd_freed
);
1220 DP(BNX2X_MSG_SP
, "Waited %d*%d usec for PBF tx buffer[%d]\n",
1221 poll_count
-cur_cnt
, FLR_WAIT_INTERVAL
, regs
->pN
);
1224 static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x
*bp
,
1225 struct pbf_pN_cmd_regs
*regs
,
1228 u32 occup
, to_free
, freed
, freed_start
;
1229 u32 cur_cnt
= poll_count
;
1231 occup
= to_free
= REG_RD(bp
, regs
->lines_occup
);
1232 freed
= freed_start
= REG_RD(bp
, regs
->lines_freed
);
1234 DP(BNX2X_MSG_SP
, "OCCUPANCY[%d] : s:%x\n", regs
->pN
, occup
);
1235 DP(BNX2X_MSG_SP
, "LINES_FREED[%d] : s:%x\n", regs
->pN
, freed
);
1237 while (occup
&& ((u32
)SUB_S32(freed
, freed_start
) < to_free
)) {
1239 udelay(FLR_WAIT_INTERVAL
);
1240 occup
= REG_RD(bp
, regs
->lines_occup
);
1241 freed
= REG_RD(bp
, regs
->lines_freed
);
1243 DP(BNX2X_MSG_SP
, "PBF cmd queue[%d] timed out\n",
1245 DP(BNX2X_MSG_SP
, "OCCUPANCY[%d] : s:%x\n",
1247 DP(BNX2X_MSG_SP
, "LINES_FREED[%d] : s:%x\n",
1252 DP(BNX2X_MSG_SP
, "Waited %d*%d usec for PBF cmd queue[%d]\n",
1253 poll_count
-cur_cnt
, FLR_WAIT_INTERVAL
, regs
->pN
);
1256 static u32
bnx2x_flr_clnup_reg_poll(struct bnx2x
*bp
, u32 reg
,
1257 u32 expected
, u32 poll_count
)
1259 u32 cur_cnt
= poll_count
;
1262 while ((val
= REG_RD(bp
, reg
)) != expected
&& cur_cnt
--)
1263 udelay(FLR_WAIT_INTERVAL
);
1268 int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x
*bp
, u32 reg
,
1269 char *msg
, u32 poll_cnt
)
1271 u32 val
= bnx2x_flr_clnup_reg_poll(bp
, reg
, 0, poll_cnt
);
1273 BNX2X_ERR("%s usage count=%d\n", msg
, val
);
1279 /* Common routines with VF FLR cleanup */
1280 u32
bnx2x_flr_clnup_poll_count(struct bnx2x
*bp
)
1282 /* adjust polling timeout */
1283 if (CHIP_REV_IS_EMUL(bp
))
1284 return FLR_POLL_CNT
* 2000;
1286 if (CHIP_REV_IS_FPGA(bp
))
1287 return FLR_POLL_CNT
* 120;
1289 return FLR_POLL_CNT
;
1292 void bnx2x_tx_hw_flushed(struct bnx2x
*bp
, u32 poll_count
)
1294 struct pbf_pN_cmd_regs cmd_regs
[] = {
1295 {0, (CHIP_IS_E3B0(bp
)) ?
1296 PBF_REG_TQ_OCCUPANCY_Q0
:
1297 PBF_REG_P0_TQ_OCCUPANCY
,
1298 (CHIP_IS_E3B0(bp
)) ?
1299 PBF_REG_TQ_LINES_FREED_CNT_Q0
:
1300 PBF_REG_P0_TQ_LINES_FREED_CNT
},
1301 {1, (CHIP_IS_E3B0(bp
)) ?
1302 PBF_REG_TQ_OCCUPANCY_Q1
:
1303 PBF_REG_P1_TQ_OCCUPANCY
,
1304 (CHIP_IS_E3B0(bp
)) ?
1305 PBF_REG_TQ_LINES_FREED_CNT_Q1
:
1306 PBF_REG_P1_TQ_LINES_FREED_CNT
},
1307 {4, (CHIP_IS_E3B0(bp
)) ?
1308 PBF_REG_TQ_OCCUPANCY_LB_Q
:
1309 PBF_REG_P4_TQ_OCCUPANCY
,
1310 (CHIP_IS_E3B0(bp
)) ?
1311 PBF_REG_TQ_LINES_FREED_CNT_LB_Q
:
1312 PBF_REG_P4_TQ_LINES_FREED_CNT
}
1315 struct pbf_pN_buf_regs buf_regs
[] = {
1316 {0, (CHIP_IS_E3B0(bp
)) ?
1317 PBF_REG_INIT_CRD_Q0
:
1318 PBF_REG_P0_INIT_CRD
,
1319 (CHIP_IS_E3B0(bp
)) ?
1322 (CHIP_IS_E3B0(bp
)) ?
1323 PBF_REG_INTERNAL_CRD_FREED_CNT_Q0
:
1324 PBF_REG_P0_INTERNAL_CRD_FREED_CNT
},
1325 {1, (CHIP_IS_E3B0(bp
)) ?
1326 PBF_REG_INIT_CRD_Q1
:
1327 PBF_REG_P1_INIT_CRD
,
1328 (CHIP_IS_E3B0(bp
)) ?
1331 (CHIP_IS_E3B0(bp
)) ?
1332 PBF_REG_INTERNAL_CRD_FREED_CNT_Q1
:
1333 PBF_REG_P1_INTERNAL_CRD_FREED_CNT
},
1334 {4, (CHIP_IS_E3B0(bp
)) ?
1335 PBF_REG_INIT_CRD_LB_Q
:
1336 PBF_REG_P4_INIT_CRD
,
1337 (CHIP_IS_E3B0(bp
)) ?
1338 PBF_REG_CREDIT_LB_Q
:
1340 (CHIP_IS_E3B0(bp
)) ?
1341 PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q
:
1342 PBF_REG_P4_INTERNAL_CRD_FREED_CNT
},
1347 /* Verify the command queues are flushed P0, P1, P4 */
1348 for (i
= 0; i
< ARRAY_SIZE(cmd_regs
); i
++)
1349 bnx2x_pbf_pN_cmd_flushed(bp
, &cmd_regs
[i
], poll_count
);
1351 /* Verify the transmission buffers are flushed P0, P1, P4 */
1352 for (i
= 0; i
< ARRAY_SIZE(buf_regs
); i
++)
1353 bnx2x_pbf_pN_buf_flushed(bp
, &buf_regs
[i
], poll_count
);
1356 #define OP_GEN_PARAM(param) \
1357 (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
1359 #define OP_GEN_TYPE(type) \
1360 (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
1362 #define OP_GEN_AGG_VECT(index) \
1363 (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
1365 int bnx2x_send_final_clnup(struct bnx2x
*bp
, u8 clnup_func
, u32 poll_cnt
)
1367 u32 op_gen_command
= 0;
1368 u32 comp_addr
= BAR_CSTRORM_INTMEM
+
1369 CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func
);
1372 if (REG_RD(bp
, comp_addr
)) {
1373 BNX2X_ERR("Cleanup complete was not 0 before sending\n");
1377 op_gen_command
|= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX
);
1378 op_gen_command
|= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE
);
1379 op_gen_command
|= OP_GEN_AGG_VECT(clnup_func
);
1380 op_gen_command
|= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT
;
1382 DP(BNX2X_MSG_SP
, "sending FW Final cleanup\n");
1383 REG_WR(bp
, XSDM_REG_OPERATION_GEN
, op_gen_command
);
1385 if (bnx2x_flr_clnup_reg_poll(bp
, comp_addr
, 1, poll_cnt
) != 1) {
1386 BNX2X_ERR("FW final cleanup did not succeed\n");
1387 DP(BNX2X_MSG_SP
, "At timeout completion address contained %x\n",
1388 (REG_RD(bp
, comp_addr
)));
1392 /* Zero completion for next FLR */
1393 REG_WR(bp
, comp_addr
, 0);
1398 u8
bnx2x_is_pcie_pending(struct pci_dev
*dev
)
1402 pcie_capability_read_word(dev
, PCI_EXP_DEVSTA
, &status
);
1403 return status
& PCI_EXP_DEVSTA_TRPND
;
1406 /* PF FLR specific routines
1408 static int bnx2x_poll_hw_usage_counters(struct bnx2x
*bp
, u32 poll_cnt
)
1410 /* wait for CFC PF usage-counter to zero (includes all the VFs) */
1411 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1412 CFC_REG_NUM_LCIDS_INSIDE_PF
,
1413 "CFC PF usage counter timed out",
1417 /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
1418 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1419 DORQ_REG_PF_USAGE_CNT
,
1420 "DQ PF usage counter timed out",
1424 /* Wait for QM PF usage-counter to zero (until DQ cleanup) */
1425 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1426 QM_REG_PF_USG_CNT_0
+ 4*BP_FUNC(bp
),
1427 "QM PF usage counter timed out",
1431 /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
1432 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1433 TM_REG_LIN0_VNIC_UC
+ 4*BP_PORT(bp
),
1434 "Timers VNIC usage counter timed out",
1437 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1438 TM_REG_LIN0_NUM_SCANS
+ 4*BP_PORT(bp
),
1439 "Timers NUM_SCANS usage counter timed out",
1443 /* Wait DMAE PF usage counter to zero */
1444 if (bnx2x_flr_clnup_poll_hw_counter(bp
,
1445 dmae_reg_go_c
[INIT_DMAE_C(bp
)],
1446 "DMAE command register timed out",
1453 static void bnx2x_hw_enable_status(struct bnx2x
*bp
)
1457 val
= REG_RD(bp
, CFC_REG_WEAK_ENABLE_PF
);
1458 DP(BNX2X_MSG_SP
, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val
);
1460 val
= REG_RD(bp
, PBF_REG_DISABLE_PF
);
1461 DP(BNX2X_MSG_SP
, "PBF_REG_DISABLE_PF is 0x%x\n", val
);
1463 val
= REG_RD(bp
, IGU_REG_PCI_PF_MSI_EN
);
1464 DP(BNX2X_MSG_SP
, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val
);
1466 val
= REG_RD(bp
, IGU_REG_PCI_PF_MSIX_EN
);
1467 DP(BNX2X_MSG_SP
, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val
);
1469 val
= REG_RD(bp
, IGU_REG_PCI_PF_MSIX_FUNC_MASK
);
1470 DP(BNX2X_MSG_SP
, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val
);
1472 val
= REG_RD(bp
, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR
);
1473 DP(BNX2X_MSG_SP
, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val
);
1475 val
= REG_RD(bp
, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR
);
1476 DP(BNX2X_MSG_SP
, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val
);
1478 val
= REG_RD(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
);
1479 DP(BNX2X_MSG_SP
, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n",
1483 static int bnx2x_pf_flr_clnup(struct bnx2x
*bp
)
1485 u32 poll_cnt
= bnx2x_flr_clnup_poll_count(bp
);
1487 DP(BNX2X_MSG_SP
, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp
));
1489 /* Re-enable PF target read access */
1490 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ
, 1);
1492 /* Poll HW usage counters */
1493 DP(BNX2X_MSG_SP
, "Polling usage counters\n");
1494 if (bnx2x_poll_hw_usage_counters(bp
, poll_cnt
))
1497 /* Zero the igu 'trailing edge' and 'leading edge' */
1499 /* Send the FW cleanup command */
1500 if (bnx2x_send_final_clnup(bp
, (u8
)BP_FUNC(bp
), poll_cnt
))
1505 /* Verify TX hw is flushed */
1506 bnx2x_tx_hw_flushed(bp
, poll_cnt
);
1508 /* Wait 100ms (not adjusted according to platform) */
1511 /* Verify no pending pci transactions */
1512 if (bnx2x_is_pcie_pending(bp
->pdev
))
1513 BNX2X_ERR("PCIE Transactions still pending\n");
1516 bnx2x_hw_enable_status(bp
);
1519 * Master enable - Due to WB DMAE writes performed before this
1520 * register is re-initialized as part of the regular function init
1522 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 1);
1527 static void bnx2x_hc_int_enable(struct bnx2x
*bp
)
1529 int port
= BP_PORT(bp
);
1530 u32 addr
= port
? HC_REG_CONFIG_1
: HC_REG_CONFIG_0
;
1531 u32 val
= REG_RD(bp
, addr
);
1532 bool msix
= (bp
->flags
& USING_MSIX_FLAG
) ? true : false;
1533 bool single_msix
= (bp
->flags
& USING_SINGLE_MSIX_FLAG
) ? true : false;
1534 bool msi
= (bp
->flags
& USING_MSI_FLAG
) ? true : false;
1537 val
&= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
1538 HC_CONFIG_0_REG_INT_LINE_EN_0
);
1539 val
|= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
|
1540 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
1542 val
|= HC_CONFIG_0_REG_SINGLE_ISR_EN_0
;
1544 val
&= ~HC_CONFIG_0_REG_INT_LINE_EN_0
;
1545 val
|= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
1546 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
|
1547 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
1549 val
|= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0
|
1550 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
|
1551 HC_CONFIG_0_REG_INT_LINE_EN_0
|
1552 HC_CONFIG_0_REG_ATTN_BIT_EN_0
);
1554 if (!CHIP_IS_E1(bp
)) {
1556 "write %x to HC %d (addr 0x%x)\n", val
, port
, addr
);
1558 REG_WR(bp
, addr
, val
);
1560 val
&= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0
;
1565 REG_WR(bp
, HC_REG_INT_MASK
+ port
*4, 0x1FFFF);
1568 "write %x to HC %d (addr 0x%x) mode %s\n", val
, port
, addr
,
1569 (msix
? "MSI-X" : (msi
? "MSI" : "INTx")));
1571 REG_WR(bp
, addr
, val
);
1573 * Ensure that HC_CONFIG is written before leading/trailing edge config
1578 if (!CHIP_IS_E1(bp
)) {
1579 /* init leading/trailing edge */
1581 val
= (0xee0f | (1 << (BP_VN(bp
) + 4)));
1583 /* enable nig and gpio3 attention */
1588 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, val
);
1589 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, val
);
1592 /* Make sure that interrupts are indeed enabled from here on */
1596 static void bnx2x_igu_int_enable(struct bnx2x
*bp
)
1599 bool msix
= (bp
->flags
& USING_MSIX_FLAG
) ? true : false;
1600 bool single_msix
= (bp
->flags
& USING_SINGLE_MSIX_FLAG
) ? true : false;
1601 bool msi
= (bp
->flags
& USING_MSI_FLAG
) ? true : false;
1603 val
= REG_RD(bp
, IGU_REG_PF_CONFIGURATION
);
1606 val
&= ~(IGU_PF_CONF_INT_LINE_EN
|
1607 IGU_PF_CONF_SINGLE_ISR_EN
);
1608 val
|= (IGU_PF_CONF_MSI_MSIX_EN
|
1609 IGU_PF_CONF_ATTN_BIT_EN
);
1612 val
|= IGU_PF_CONF_SINGLE_ISR_EN
;
1614 val
&= ~IGU_PF_CONF_INT_LINE_EN
;
1615 val
|= (IGU_PF_CONF_MSI_MSIX_EN
|
1616 IGU_PF_CONF_ATTN_BIT_EN
|
1617 IGU_PF_CONF_SINGLE_ISR_EN
);
1619 val
&= ~IGU_PF_CONF_MSI_MSIX_EN
;
1620 val
|= (IGU_PF_CONF_INT_LINE_EN
|
1621 IGU_PF_CONF_ATTN_BIT_EN
|
1622 IGU_PF_CONF_SINGLE_ISR_EN
);
1625 /* Clean previous status - need to configure igu prior to ack*/
1626 if ((!msix
) || single_msix
) {
1627 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, val
);
1631 val
|= IGU_PF_CONF_FUNC_EN
;
1633 DP(NETIF_MSG_IFUP
, "write 0x%x to IGU mode %s\n",
1634 val
, (msix
? "MSI-X" : (msi
? "MSI" : "INTx")));
1636 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, val
);
1638 if (val
& IGU_PF_CONF_INT_LINE_EN
)
1639 pci_intx(bp
->pdev
, true);
1643 /* init leading/trailing edge */
1645 val
= (0xee0f | (1 << (BP_VN(bp
) + 4)));
1647 /* enable nig and gpio3 attention */
1652 REG_WR(bp
, IGU_REG_TRAILING_EDGE_LATCH
, val
);
1653 REG_WR(bp
, IGU_REG_LEADING_EDGE_LATCH
, val
);
1655 /* Make sure that interrupts are indeed enabled from here on */
1659 void bnx2x_int_enable(struct bnx2x
*bp
)
1661 if (bp
->common
.int_block
== INT_BLOCK_HC
)
1662 bnx2x_hc_int_enable(bp
);
1664 bnx2x_igu_int_enable(bp
);
1667 void bnx2x_int_disable_sync(struct bnx2x
*bp
, int disable_hw
)
1669 int msix
= (bp
->flags
& USING_MSIX_FLAG
) ? 1 : 0;
1673 /* prevent the HW from sending interrupts */
1674 bnx2x_int_disable(bp
);
1676 /* make sure all ISRs are done */
1678 synchronize_irq(bp
->msix_table
[0].vector
);
1680 if (CNIC_SUPPORT(bp
))
1682 for_each_eth_queue(bp
, i
)
1683 synchronize_irq(bp
->msix_table
[offset
++].vector
);
1685 synchronize_irq(bp
->pdev
->irq
);
1687 /* make sure sp_task is not running */
1688 cancel_delayed_work(&bp
->sp_task
);
1689 cancel_delayed_work(&bp
->period_task
);
1690 flush_workqueue(bnx2x_wq
);
1696 * General service functions
1699 /* Return true if succeeded to acquire the lock */
1700 static bool bnx2x_trylock_hw_lock(struct bnx2x
*bp
, u32 resource
)
1703 u32 resource_bit
= (1 << resource
);
1704 int func
= BP_FUNC(bp
);
1705 u32 hw_lock_control_reg
;
1707 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
,
1708 "Trying to take a lock on resource %d\n", resource
);
1710 /* Validating that the resource is within range */
1711 if (resource
> HW_LOCK_MAX_RESOURCE_VALUE
) {
1712 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
,
1713 "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1714 resource
, HW_LOCK_MAX_RESOURCE_VALUE
);
1719 hw_lock_control_reg
= (MISC_REG_DRIVER_CONTROL_1
+ func
*8);
1721 hw_lock_control_reg
=
1722 (MISC_REG_DRIVER_CONTROL_7
+ (func
- 6)*8);
1724 /* Try to acquire the lock */
1725 REG_WR(bp
, hw_lock_control_reg
+ 4, resource_bit
);
1726 lock_status
= REG_RD(bp
, hw_lock_control_reg
);
1727 if (lock_status
& resource_bit
)
1730 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
,
1731 "Failed to get a lock on resource %d\n", resource
);
1736 * bnx2x_get_leader_lock_resource - get the recovery leader resource id
1738 * @bp: driver handle
1740 * Returns the recovery leader resource id according to the engine this function
1741 * belongs to. Currently only only 2 engines is supported.
1743 static int bnx2x_get_leader_lock_resource(struct bnx2x
*bp
)
1746 return HW_LOCK_RESOURCE_RECOVERY_LEADER_1
;
1748 return HW_LOCK_RESOURCE_RECOVERY_LEADER_0
;
1752 * bnx2x_trylock_leader_lock- try to acquire a leader lock.
1754 * @bp: driver handle
1756 * Tries to acquire a leader lock for current engine.
1758 static bool bnx2x_trylock_leader_lock(struct bnx2x
*bp
)
1760 return bnx2x_trylock_hw_lock(bp
, bnx2x_get_leader_lock_resource(bp
));
1763 static void bnx2x_cnic_cfc_comp(struct bnx2x
*bp
, int cid
, u8 err
);
1765 /* schedule the sp task and mark that interrupt occurred (runs from ISR) */
1766 static int bnx2x_schedule_sp_task(struct bnx2x
*bp
)
1768 /* Set the interrupt occurred bit for the sp-task to recognize it
1769 * must ack the interrupt and transition according to the IGU
1772 atomic_set(&bp
->interrupt_occurred
, 1);
1774 /* The sp_task must execute only after this bit
1775 * is set, otherwise we will get out of sync and miss all
1776 * further interrupts. Hence, the barrier.
1780 /* schedule sp_task to workqueue */
1781 return queue_delayed_work(bnx2x_wq
, &bp
->sp_task
, 0);
1784 void bnx2x_sp_event(struct bnx2x_fastpath
*fp
, union eth_rx_cqe
*rr_cqe
)
1786 struct bnx2x
*bp
= fp
->bp
;
1787 int cid
= SW_CID(rr_cqe
->ramrod_cqe
.conn_and_cmd_data
);
1788 int command
= CQE_CMD(rr_cqe
->ramrod_cqe
.conn_and_cmd_data
);
1789 enum bnx2x_queue_cmd drv_cmd
= BNX2X_Q_CMD_MAX
;
1790 struct bnx2x_queue_sp_obj
*q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
1793 "fp %d cid %d got ramrod #%d state is %x type is %d\n",
1794 fp
->index
, cid
, command
, bp
->state
,
1795 rr_cqe
->ramrod_cqe
.ramrod_type
);
1797 /* If cid is within VF range, replace the slowpath object with the
1798 * one corresponding to this VF
1800 if (cid
>= BNX2X_FIRST_VF_CID
&&
1801 cid
< BNX2X_FIRST_VF_CID
+ BNX2X_VF_CIDS
)
1802 bnx2x_iov_set_queue_sp_obj(bp
, cid
, &q_obj
);
1805 case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE
):
1806 DP(BNX2X_MSG_SP
, "got UPDATE ramrod. CID %d\n", cid
);
1807 drv_cmd
= BNX2X_Q_CMD_UPDATE
;
1810 case (RAMROD_CMD_ID_ETH_CLIENT_SETUP
):
1811 DP(BNX2X_MSG_SP
, "got MULTI[%d] setup ramrod\n", cid
);
1812 drv_cmd
= BNX2X_Q_CMD_SETUP
;
1815 case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP
):
1816 DP(BNX2X_MSG_SP
, "got MULTI[%d] tx-only setup ramrod\n", cid
);
1817 drv_cmd
= BNX2X_Q_CMD_SETUP_TX_ONLY
;
1820 case (RAMROD_CMD_ID_ETH_HALT
):
1821 DP(BNX2X_MSG_SP
, "got MULTI[%d] halt ramrod\n", cid
);
1822 drv_cmd
= BNX2X_Q_CMD_HALT
;
1825 case (RAMROD_CMD_ID_ETH_TERMINATE
):
1826 DP(BNX2X_MSG_SP
, "got MULTI[%d] terminate ramrod\n", cid
);
1827 drv_cmd
= BNX2X_Q_CMD_TERMINATE
;
1830 case (RAMROD_CMD_ID_ETH_EMPTY
):
1831 DP(BNX2X_MSG_SP
, "got MULTI[%d] empty ramrod\n", cid
);
1832 drv_cmd
= BNX2X_Q_CMD_EMPTY
;
1835 case (RAMROD_CMD_ID_ETH_TPA_UPDATE
):
1836 DP(BNX2X_MSG_SP
, "got tpa update ramrod CID=%d\n", cid
);
1837 drv_cmd
= BNX2X_Q_CMD_UPDATE_TPA
;
1841 BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n",
1842 command
, fp
->index
);
1846 if ((drv_cmd
!= BNX2X_Q_CMD_MAX
) &&
1847 q_obj
->complete_cmd(bp
, q_obj
, drv_cmd
))
1848 /* q_obj->complete_cmd() failure means that this was
1849 * an unexpected completion.
1851 * In this case we don't want to increase the bp->spq_left
1852 * because apparently we haven't sent this command the first
1855 #ifdef BNX2X_STOP_ON_ERROR
1861 smp_mb__before_atomic();
1862 atomic_inc(&bp
->cq_spq_left
);
1863 /* push the change in bp->spq_left and towards the memory */
1864 smp_mb__after_atomic();
1866 DP(BNX2X_MSG_SP
, "bp->cq_spq_left %x\n", atomic_read(&bp
->cq_spq_left
));
1868 if ((drv_cmd
== BNX2X_Q_CMD_UPDATE
) && (IS_FCOE_FP(fp
)) &&
1869 (!!test_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING
, &bp
->sp_state
))) {
1870 /* if Q update ramrod is completed for last Q in AFEX vif set
1871 * flow, then ACK MCP at the end
1873 * mark pending ACK to MCP bit.
1874 * prevent case that both bits are cleared.
1875 * At the end of load/unload driver checks that
1876 * sp_state is cleared, and this order prevents
1879 smp_mb__before_atomic();
1880 set_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK
, &bp
->sp_state
);
1882 clear_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING
, &bp
->sp_state
);
1883 smp_mb__after_atomic();
1885 /* schedule the sp task as mcp ack is required */
1886 bnx2x_schedule_sp_task(bp
);
1892 irqreturn_t
bnx2x_interrupt(int irq
, void *dev_instance
)
1894 struct bnx2x
*bp
= netdev_priv(dev_instance
);
1895 u16 status
= bnx2x_ack_int(bp
);
1900 /* Return here if interrupt is shared and it's not for us */
1901 if (unlikely(status
== 0)) {
1902 DP(NETIF_MSG_INTR
, "not our interrupt!\n");
1905 DP(NETIF_MSG_INTR
, "got an interrupt status 0x%x\n", status
);
1907 #ifdef BNX2X_STOP_ON_ERROR
1908 if (unlikely(bp
->panic
))
1912 for_each_eth_queue(bp
, i
) {
1913 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
1915 mask
= 0x2 << (fp
->index
+ CNIC_SUPPORT(bp
));
1916 if (status
& mask
) {
1917 /* Handle Rx or Tx according to SB id */
1918 for_each_cos_in_tx_queue(fp
, cos
)
1919 prefetch(fp
->txdata_ptr
[cos
]->tx_cons_sb
);
1920 prefetch(&fp
->sb_running_index
[SM_RX_ID
]);
1921 napi_schedule(&bnx2x_fp(bp
, fp
->index
, napi
));
1926 if (CNIC_SUPPORT(bp
)) {
1928 if (status
& (mask
| 0x1)) {
1929 struct cnic_ops
*c_ops
= NULL
;
1932 c_ops
= rcu_dereference(bp
->cnic_ops
);
1933 if (c_ops
&& (bp
->cnic_eth_dev
.drv_state
&
1934 CNIC_DRV_STATE_HANDLES_IRQ
))
1935 c_ops
->cnic_handler(bp
->cnic_data
, NULL
);
1942 if (unlikely(status
& 0x1)) {
1944 /* schedule sp task to perform default status block work, ack
1945 * attentions and enable interrupts.
1947 bnx2x_schedule_sp_task(bp
);
1954 if (unlikely(status
))
1955 DP(NETIF_MSG_INTR
, "got an unknown interrupt! (status 0x%x)\n",
1964 * General service functions
1967 int bnx2x_acquire_hw_lock(struct bnx2x
*bp
, u32 resource
)
1970 u32 resource_bit
= (1 << resource
);
1971 int func
= BP_FUNC(bp
);
1972 u32 hw_lock_control_reg
;
1975 /* Validating that the resource is within range */
1976 if (resource
> HW_LOCK_MAX_RESOURCE_VALUE
) {
1977 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1978 resource
, HW_LOCK_MAX_RESOURCE_VALUE
);
1983 hw_lock_control_reg
= (MISC_REG_DRIVER_CONTROL_1
+ func
*8);
1985 hw_lock_control_reg
=
1986 (MISC_REG_DRIVER_CONTROL_7
+ (func
- 6)*8);
1989 /* Validating that the resource is not already taken */
1990 lock_status
= REG_RD(bp
, hw_lock_control_reg
);
1991 if (lock_status
& resource_bit
) {
1992 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x\n",
1993 lock_status
, resource_bit
);
1997 /* Try for 5 second every 5ms */
1998 for (cnt
= 0; cnt
< 1000; cnt
++) {
1999 /* Try to acquire the lock */
2000 REG_WR(bp
, hw_lock_control_reg
+ 4, resource_bit
);
2001 lock_status
= REG_RD(bp
, hw_lock_control_reg
);
2002 if (lock_status
& resource_bit
)
2005 usleep_range(5000, 10000);
2007 BNX2X_ERR("Timeout\n");
2011 int bnx2x_release_leader_lock(struct bnx2x
*bp
)
2013 return bnx2x_release_hw_lock(bp
, bnx2x_get_leader_lock_resource(bp
));
2016 int bnx2x_release_hw_lock(struct bnx2x
*bp
, u32 resource
)
2019 u32 resource_bit
= (1 << resource
);
2020 int func
= BP_FUNC(bp
);
2021 u32 hw_lock_control_reg
;
2023 /* Validating that the resource is within range */
2024 if (resource
> HW_LOCK_MAX_RESOURCE_VALUE
) {
2025 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
2026 resource
, HW_LOCK_MAX_RESOURCE_VALUE
);
2031 hw_lock_control_reg
= (MISC_REG_DRIVER_CONTROL_1
+ func
*8);
2033 hw_lock_control_reg
=
2034 (MISC_REG_DRIVER_CONTROL_7
+ (func
- 6)*8);
2037 /* Validating that the resource is currently taken */
2038 lock_status
= REG_RD(bp
, hw_lock_control_reg
);
2039 if (!(lock_status
& resource_bit
)) {
2040 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x. Unlock was called but lock wasn't taken!\n",
2041 lock_status
, resource_bit
);
2045 REG_WR(bp
, hw_lock_control_reg
, resource_bit
);
2049 int bnx2x_get_gpio(struct bnx2x
*bp
, int gpio_num
, u8 port
)
2051 /* The GPIO should be swapped if swap register is set and active */
2052 int gpio_port
= (REG_RD(bp
, NIG_REG_PORT_SWAP
) &&
2053 REG_RD(bp
, NIG_REG_STRAP_OVERRIDE
)) ^ port
;
2054 int gpio_shift
= gpio_num
+
2055 (gpio_port
? MISC_REGISTERS_GPIO_PORT_SHIFT
: 0);
2056 u32 gpio_mask
= (1 << gpio_shift
);
2060 if (gpio_num
> MISC_REGISTERS_GPIO_3
) {
2061 BNX2X_ERR("Invalid GPIO %d\n", gpio_num
);
2065 /* read GPIO value */
2066 gpio_reg
= REG_RD(bp
, MISC_REG_GPIO
);
2068 /* get the requested pin value */
2069 if ((gpio_reg
& gpio_mask
) == gpio_mask
)
2074 DP(NETIF_MSG_LINK
, "pin %d value 0x%x\n", gpio_num
, value
);
2079 int bnx2x_set_gpio(struct bnx2x
*bp
, int gpio_num
, u32 mode
, u8 port
)
2081 /* The GPIO should be swapped if swap register is set and active */
2082 int gpio_port
= (REG_RD(bp
, NIG_REG_PORT_SWAP
) &&
2083 REG_RD(bp
, NIG_REG_STRAP_OVERRIDE
)) ^ port
;
2084 int gpio_shift
= gpio_num
+
2085 (gpio_port
? MISC_REGISTERS_GPIO_PORT_SHIFT
: 0);
2086 u32 gpio_mask
= (1 << gpio_shift
);
2089 if (gpio_num
> MISC_REGISTERS_GPIO_3
) {
2090 BNX2X_ERR("Invalid GPIO %d\n", gpio_num
);
2094 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2095 /* read GPIO and mask except the float bits */
2096 gpio_reg
= (REG_RD(bp
, MISC_REG_GPIO
) & MISC_REGISTERS_GPIO_FLOAT
);
2099 case MISC_REGISTERS_GPIO_OUTPUT_LOW
:
2101 "Set GPIO %d (shift %d) -> output low\n",
2102 gpio_num
, gpio_shift
);
2103 /* clear FLOAT and set CLR */
2104 gpio_reg
&= ~(gpio_mask
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2105 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_CLR_POS
);
2108 case MISC_REGISTERS_GPIO_OUTPUT_HIGH
:
2110 "Set GPIO %d (shift %d) -> output high\n",
2111 gpio_num
, gpio_shift
);
2112 /* clear FLOAT and set SET */
2113 gpio_reg
&= ~(gpio_mask
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2114 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_SET_POS
);
2117 case MISC_REGISTERS_GPIO_INPUT_HI_Z
:
2119 "Set GPIO %d (shift %d) -> input\n",
2120 gpio_num
, gpio_shift
);
2122 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2129 REG_WR(bp
, MISC_REG_GPIO
, gpio_reg
);
2130 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2135 int bnx2x_set_mult_gpio(struct bnx2x
*bp
, u8 pins
, u32 mode
)
2140 /* Any port swapping should be handled by caller. */
2142 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2143 /* read GPIO and mask except the float bits */
2144 gpio_reg
= REG_RD(bp
, MISC_REG_GPIO
);
2145 gpio_reg
&= ~(pins
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2146 gpio_reg
&= ~(pins
<< MISC_REGISTERS_GPIO_CLR_POS
);
2147 gpio_reg
&= ~(pins
<< MISC_REGISTERS_GPIO_SET_POS
);
2150 case MISC_REGISTERS_GPIO_OUTPUT_LOW
:
2151 DP(NETIF_MSG_LINK
, "Set GPIO 0x%x -> output low\n", pins
);
2153 gpio_reg
|= (pins
<< MISC_REGISTERS_GPIO_CLR_POS
);
2156 case MISC_REGISTERS_GPIO_OUTPUT_HIGH
:
2157 DP(NETIF_MSG_LINK
, "Set GPIO 0x%x -> output high\n", pins
);
2159 gpio_reg
|= (pins
<< MISC_REGISTERS_GPIO_SET_POS
);
2162 case MISC_REGISTERS_GPIO_INPUT_HI_Z
:
2163 DP(NETIF_MSG_LINK
, "Set GPIO 0x%x -> input\n", pins
);
2165 gpio_reg
|= (pins
<< MISC_REGISTERS_GPIO_FLOAT_POS
);
2169 BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode
);
2175 REG_WR(bp
, MISC_REG_GPIO
, gpio_reg
);
2177 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2182 int bnx2x_set_gpio_int(struct bnx2x
*bp
, int gpio_num
, u32 mode
, u8 port
)
2184 /* The GPIO should be swapped if swap register is set and active */
2185 int gpio_port
= (REG_RD(bp
, NIG_REG_PORT_SWAP
) &&
2186 REG_RD(bp
, NIG_REG_STRAP_OVERRIDE
)) ^ port
;
2187 int gpio_shift
= gpio_num
+
2188 (gpio_port
? MISC_REGISTERS_GPIO_PORT_SHIFT
: 0);
2189 u32 gpio_mask
= (1 << gpio_shift
);
2192 if (gpio_num
> MISC_REGISTERS_GPIO_3
) {
2193 BNX2X_ERR("Invalid GPIO %d\n", gpio_num
);
2197 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2199 gpio_reg
= REG_RD(bp
, MISC_REG_GPIO_INT
);
2202 case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR
:
2204 "Clear GPIO INT %d (shift %d) -> output low\n",
2205 gpio_num
, gpio_shift
);
2206 /* clear SET and set CLR */
2207 gpio_reg
&= ~(gpio_mask
<< MISC_REGISTERS_GPIO_INT_SET_POS
);
2208 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_INT_CLR_POS
);
2211 case MISC_REGISTERS_GPIO_INT_OUTPUT_SET
:
2213 "Set GPIO INT %d (shift %d) -> output high\n",
2214 gpio_num
, gpio_shift
);
2215 /* clear CLR and set SET */
2216 gpio_reg
&= ~(gpio_mask
<< MISC_REGISTERS_GPIO_INT_CLR_POS
);
2217 gpio_reg
|= (gpio_mask
<< MISC_REGISTERS_GPIO_INT_SET_POS
);
2224 REG_WR(bp
, MISC_REG_GPIO_INT
, gpio_reg
);
2225 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_GPIO
);
2230 static int bnx2x_set_spio(struct bnx2x
*bp
, int spio
, u32 mode
)
2234 /* Only 2 SPIOs are configurable */
2235 if ((spio
!= MISC_SPIO_SPIO4
) && (spio
!= MISC_SPIO_SPIO5
)) {
2236 BNX2X_ERR("Invalid SPIO 0x%x\n", spio
);
2240 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_SPIO
);
2241 /* read SPIO and mask except the float bits */
2242 spio_reg
= (REG_RD(bp
, MISC_REG_SPIO
) & MISC_SPIO_FLOAT
);
2245 case MISC_SPIO_OUTPUT_LOW
:
2246 DP(NETIF_MSG_HW
, "Set SPIO 0x%x -> output low\n", spio
);
2247 /* clear FLOAT and set CLR */
2248 spio_reg
&= ~(spio
<< MISC_SPIO_FLOAT_POS
);
2249 spio_reg
|= (spio
<< MISC_SPIO_CLR_POS
);
2252 case MISC_SPIO_OUTPUT_HIGH
:
2253 DP(NETIF_MSG_HW
, "Set SPIO 0x%x -> output high\n", spio
);
2254 /* clear FLOAT and set SET */
2255 spio_reg
&= ~(spio
<< MISC_SPIO_FLOAT_POS
);
2256 spio_reg
|= (spio
<< MISC_SPIO_SET_POS
);
2259 case MISC_SPIO_INPUT_HI_Z
:
2260 DP(NETIF_MSG_HW
, "Set SPIO 0x%x -> input\n", spio
);
2262 spio_reg
|= (spio
<< MISC_SPIO_FLOAT_POS
);
2269 REG_WR(bp
, MISC_REG_SPIO
, spio_reg
);
2270 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_SPIO
);
2275 void bnx2x_calc_fc_adv(struct bnx2x
*bp
)
2277 u8 cfg_idx
= bnx2x_get_link_cfg_idx(bp
);
2278 switch (bp
->link_vars
.ieee_fc
&
2279 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK
) {
2280 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE
:
2281 bp
->port
.advertising
[cfg_idx
] &= ~(ADVERTISED_Asym_Pause
|
2285 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH
:
2286 bp
->port
.advertising
[cfg_idx
] |= (ADVERTISED_Asym_Pause
|
2290 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC
:
2291 bp
->port
.advertising
[cfg_idx
] |= ADVERTISED_Asym_Pause
;
2295 bp
->port
.advertising
[cfg_idx
] &= ~(ADVERTISED_Asym_Pause
|
2301 static void bnx2x_set_requested_fc(struct bnx2x
*bp
)
2303 /* Initialize link parameters structure variables
2304 * It is recommended to turn off RX FC for jumbo frames
2305 * for better performance
2307 if (CHIP_IS_E1x(bp
) && (bp
->dev
->mtu
> 5000))
2308 bp
->link_params
.req_fc_auto_adv
= BNX2X_FLOW_CTRL_TX
;
2310 bp
->link_params
.req_fc_auto_adv
= BNX2X_FLOW_CTRL_BOTH
;
2313 static void bnx2x_init_dropless_fc(struct bnx2x
*bp
)
2315 u32 pause_enabled
= 0;
2317 if (!CHIP_IS_E1(bp
) && bp
->dropless_fc
&& bp
->link_vars
.link_up
) {
2318 if (bp
->link_vars
.flow_ctrl
& BNX2X_FLOW_CTRL_TX
)
2321 REG_WR(bp
, BAR_USTRORM_INTMEM
+
2322 USTORM_ETH_PAUSE_ENABLED_OFFSET(BP_PORT(bp
)),
2326 DP(NETIF_MSG_IFUP
| NETIF_MSG_LINK
, "dropless_fc is %s\n",
2327 pause_enabled
? "enabled" : "disabled");
2330 int bnx2x_initial_phy_init(struct bnx2x
*bp
, int load_mode
)
2332 int rc
, cfx_idx
= bnx2x_get_link_cfg_idx(bp
);
2333 u16 req_line_speed
= bp
->link_params
.req_line_speed
[cfx_idx
];
2335 if (!BP_NOMCP(bp
)) {
2336 bnx2x_set_requested_fc(bp
);
2337 bnx2x_acquire_phy_lock(bp
);
2339 if (load_mode
== LOAD_DIAG
) {
2340 struct link_params
*lp
= &bp
->link_params
;
2341 lp
->loopback_mode
= LOOPBACK_XGXS
;
2342 /* do PHY loopback at 10G speed, if possible */
2343 if (lp
->req_line_speed
[cfx_idx
] < SPEED_10000
) {
2344 if (lp
->speed_cap_mask
[cfx_idx
] &
2345 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G
)
2346 lp
->req_line_speed
[cfx_idx
] =
2349 lp
->req_line_speed
[cfx_idx
] =
2354 if (load_mode
== LOAD_LOOPBACK_EXT
) {
2355 struct link_params
*lp
= &bp
->link_params
;
2356 lp
->loopback_mode
= LOOPBACK_EXT
;
2359 rc
= bnx2x_phy_init(&bp
->link_params
, &bp
->link_vars
);
2361 bnx2x_release_phy_lock(bp
);
2363 bnx2x_init_dropless_fc(bp
);
2365 bnx2x_calc_fc_adv(bp
);
2367 if (bp
->link_vars
.link_up
) {
2368 bnx2x_stats_handle(bp
, STATS_EVENT_LINK_UP
);
2369 bnx2x_link_report(bp
);
2371 queue_delayed_work(bnx2x_wq
, &bp
->period_task
, 0);
2372 bp
->link_params
.req_line_speed
[cfx_idx
] = req_line_speed
;
2375 BNX2X_ERR("Bootcode is missing - can not initialize link\n");
2379 void bnx2x_link_set(struct bnx2x
*bp
)
2381 if (!BP_NOMCP(bp
)) {
2382 bnx2x_acquire_phy_lock(bp
);
2383 bnx2x_phy_init(&bp
->link_params
, &bp
->link_vars
);
2384 bnx2x_release_phy_lock(bp
);
2386 bnx2x_init_dropless_fc(bp
);
2388 bnx2x_calc_fc_adv(bp
);
2390 BNX2X_ERR("Bootcode is missing - can not set link\n");
2393 static void bnx2x__link_reset(struct bnx2x
*bp
)
2395 if (!BP_NOMCP(bp
)) {
2396 bnx2x_acquire_phy_lock(bp
);
2397 bnx2x_lfa_reset(&bp
->link_params
, &bp
->link_vars
);
2398 bnx2x_release_phy_lock(bp
);
2400 BNX2X_ERR("Bootcode is missing - can not reset link\n");
2403 void bnx2x_force_link_reset(struct bnx2x
*bp
)
2405 bnx2x_acquire_phy_lock(bp
);
2406 bnx2x_link_reset(&bp
->link_params
, &bp
->link_vars
, 1);
2407 bnx2x_release_phy_lock(bp
);
2410 u8
bnx2x_link_test(struct bnx2x
*bp
, u8 is_serdes
)
2414 if (!BP_NOMCP(bp
)) {
2415 bnx2x_acquire_phy_lock(bp
);
2416 rc
= bnx2x_test_link(&bp
->link_params
, &bp
->link_vars
,
2418 bnx2x_release_phy_lock(bp
);
2420 BNX2X_ERR("Bootcode is missing - can not test link\n");
2425 /* Calculates the sum of vn_min_rates.
2426 It's needed for further normalizing of the min_rates.
2428 sum of vn_min_rates.
2430 0 - if all the min_rates are 0.
2431 In the later case fairness algorithm should be deactivated.
2432 If not all min_rates are zero then those that are zeroes will be set to 1.
2434 static void bnx2x_calc_vn_min(struct bnx2x
*bp
,
2435 struct cmng_init_input
*input
)
2440 for (vn
= VN_0
; vn
< BP_MAX_VN_NUM(bp
); vn
++) {
2441 u32 vn_cfg
= bp
->mf_config
[vn
];
2442 u32 vn_min_rate
= ((vn_cfg
& FUNC_MF_CFG_MIN_BW_MASK
) >>
2443 FUNC_MF_CFG_MIN_BW_SHIFT
) * 100;
2445 /* Skip hidden vns */
2446 if (vn_cfg
& FUNC_MF_CFG_FUNC_HIDE
)
2448 /* If min rate is zero - set it to 1 */
2449 else if (!vn_min_rate
)
2450 vn_min_rate
= DEF_MIN_RATE
;
2454 input
->vnic_min_rate
[vn
] = vn_min_rate
;
2457 /* if ETS or all min rates are zeros - disable fairness */
2458 if (BNX2X_IS_ETS_ENABLED(bp
)) {
2459 input
->flags
.cmng_enables
&=
2460 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN
;
2461 DP(NETIF_MSG_IFUP
, "Fairness will be disabled due to ETS\n");
2462 } else if (all_zero
) {
2463 input
->flags
.cmng_enables
&=
2464 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN
;
2466 "All MIN values are zeroes fairness will be disabled\n");
2468 input
->flags
.cmng_enables
|=
2469 CMNG_FLAGS_PER_PORT_FAIRNESS_VN
;
2472 static void bnx2x_calc_vn_max(struct bnx2x
*bp
, int vn
,
2473 struct cmng_init_input
*input
)
2476 u32 vn_cfg
= bp
->mf_config
[vn
];
2478 if (vn_cfg
& FUNC_MF_CFG_FUNC_HIDE
)
2481 u32 maxCfg
= bnx2x_extract_max_cfg(bp
, vn_cfg
);
2484 /* maxCfg in percents of linkspeed */
2485 vn_max_rate
= (bp
->link_vars
.line_speed
* maxCfg
) / 100;
2486 } else /* SD modes */
2487 /* maxCfg is absolute in 100Mb units */
2488 vn_max_rate
= maxCfg
* 100;
2491 DP(NETIF_MSG_IFUP
, "vn %d: vn_max_rate %d\n", vn
, vn_max_rate
);
2493 input
->vnic_max_rate
[vn
] = vn_max_rate
;
2496 static int bnx2x_get_cmng_fns_mode(struct bnx2x
*bp
)
2498 if (CHIP_REV_IS_SLOW(bp
))
2499 return CMNG_FNS_NONE
;
2501 return CMNG_FNS_MINMAX
;
2503 return CMNG_FNS_NONE
;
2506 void bnx2x_read_mf_cfg(struct bnx2x
*bp
)
2508 int vn
, n
= (CHIP_MODE_IS_4_PORT(bp
) ? 2 : 1);
2511 return; /* what should be the default value in this case */
2513 /* For 2 port configuration the absolute function number formula
2515 * abs_func = 2 * vn + BP_PORT + BP_PATH
2517 * and there are 4 functions per port
2519 * For 4 port configuration it is
2520 * abs_func = 4 * vn + 2 * BP_PORT + BP_PATH
2522 * and there are 2 functions per port
2524 for (vn
= VN_0
; vn
< BP_MAX_VN_NUM(bp
); vn
++) {
2525 int /*abs*/func
= n
* (2 * vn
+ BP_PORT(bp
)) + BP_PATH(bp
);
2527 if (func
>= E1H_FUNC_MAX
)
2531 MF_CFG_RD(bp
, func_mf_config
[func
].config
);
2533 if (bp
->mf_config
[BP_VN(bp
)] & FUNC_MF_CFG_FUNC_DISABLED
) {
2534 DP(NETIF_MSG_IFUP
, "mf_cfg function disabled\n");
2535 bp
->flags
|= MF_FUNC_DIS
;
2537 DP(NETIF_MSG_IFUP
, "mf_cfg function enabled\n");
2538 bp
->flags
&= ~MF_FUNC_DIS
;
2542 static void bnx2x_cmng_fns_init(struct bnx2x
*bp
, u8 read_cfg
, u8 cmng_type
)
2544 struct cmng_init_input input
;
2545 memset(&input
, 0, sizeof(struct cmng_init_input
));
2547 input
.port_rate
= bp
->link_vars
.line_speed
;
2549 if (cmng_type
== CMNG_FNS_MINMAX
&& input
.port_rate
) {
2552 /* read mf conf from shmem */
2554 bnx2x_read_mf_cfg(bp
);
2556 /* vn_weight_sum and enable fairness if not 0 */
2557 bnx2x_calc_vn_min(bp
, &input
);
2559 /* calculate and set min-max rate for each vn */
2561 for (vn
= VN_0
; vn
< BP_MAX_VN_NUM(bp
); vn
++)
2562 bnx2x_calc_vn_max(bp
, vn
, &input
);
2564 /* always enable rate shaping and fairness */
2565 input
.flags
.cmng_enables
|=
2566 CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN
;
2568 bnx2x_init_cmng(&input
, &bp
->cmng
);
2572 /* rate shaping and fairness are disabled */
2574 "rate shaping and fairness are disabled\n");
2577 static void storm_memset_cmng(struct bnx2x
*bp
,
2578 struct cmng_init
*cmng
,
2582 size_t size
= sizeof(struct cmng_struct_per_port
);
2584 u32 addr
= BAR_XSTRORM_INTMEM
+
2585 XSTORM_CMNG_PER_PORT_VARS_OFFSET(port
);
2587 __storm_memset_struct(bp
, addr
, size
, (u32
*)&cmng
->port
);
2589 for (vn
= VN_0
; vn
< BP_MAX_VN_NUM(bp
); vn
++) {
2590 int func
= func_by_vn(bp
, vn
);
2592 addr
= BAR_XSTRORM_INTMEM
+
2593 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func
);
2594 size
= sizeof(struct rate_shaping_vars_per_vn
);
2595 __storm_memset_struct(bp
, addr
, size
,
2596 (u32
*)&cmng
->vnic
.vnic_max_rate
[vn
]);
2598 addr
= BAR_XSTRORM_INTMEM
+
2599 XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func
);
2600 size
= sizeof(struct fairness_vars_per_vn
);
2601 __storm_memset_struct(bp
, addr
, size
,
2602 (u32
*)&cmng
->vnic
.vnic_min_rate
[vn
]);
2606 /* init cmng mode in HW according to local configuration */
2607 void bnx2x_set_local_cmng(struct bnx2x
*bp
)
2609 int cmng_fns
= bnx2x_get_cmng_fns_mode(bp
);
2611 if (cmng_fns
!= CMNG_FNS_NONE
) {
2612 bnx2x_cmng_fns_init(bp
, false, cmng_fns
);
2613 storm_memset_cmng(bp
, &bp
->cmng
, BP_PORT(bp
));
2615 /* rate shaping and fairness are disabled */
2617 "single function mode without fairness\n");
2621 /* This function is called upon link interrupt */
2622 static void bnx2x_link_attn(struct bnx2x
*bp
)
2624 /* Make sure that we are synced with the current statistics */
2625 bnx2x_stats_handle(bp
, STATS_EVENT_STOP
);
2627 bnx2x_link_update(&bp
->link_params
, &bp
->link_vars
);
2629 bnx2x_init_dropless_fc(bp
);
2631 if (bp
->link_vars
.link_up
) {
2633 if (bp
->link_vars
.mac_type
!= MAC_TYPE_EMAC
) {
2634 struct host_port_stats
*pstats
;
2636 pstats
= bnx2x_sp(bp
, port_stats
);
2637 /* reset old mac stats */
2638 memset(&(pstats
->mac_stx
[0]), 0,
2639 sizeof(struct mac_stx
));
2641 if (bp
->state
== BNX2X_STATE_OPEN
)
2642 bnx2x_stats_handle(bp
, STATS_EVENT_LINK_UP
);
2645 if (bp
->link_vars
.link_up
&& bp
->link_vars
.line_speed
)
2646 bnx2x_set_local_cmng(bp
);
2648 __bnx2x_link_report(bp
);
2651 bnx2x_link_sync_notify(bp
);
2654 void bnx2x__link_status_update(struct bnx2x
*bp
)
2656 if (bp
->state
!= BNX2X_STATE_OPEN
)
2659 /* read updated dcb configuration */
2661 bnx2x_dcbx_pmf_update(bp
);
2662 bnx2x_link_status_update(&bp
->link_params
, &bp
->link_vars
);
2663 if (bp
->link_vars
.link_up
)
2664 bnx2x_stats_handle(bp
, STATS_EVENT_LINK_UP
);
2666 bnx2x_stats_handle(bp
, STATS_EVENT_STOP
);
2667 /* indicate link status */
2668 bnx2x_link_report(bp
);
2671 bp
->port
.supported
[0] |= (SUPPORTED_10baseT_Half
|
2672 SUPPORTED_10baseT_Full
|
2673 SUPPORTED_100baseT_Half
|
2674 SUPPORTED_100baseT_Full
|
2675 SUPPORTED_1000baseT_Full
|
2676 SUPPORTED_2500baseX_Full
|
2677 SUPPORTED_10000baseT_Full
|
2682 SUPPORTED_Asym_Pause
);
2683 bp
->port
.advertising
[0] = bp
->port
.supported
[0];
2685 bp
->link_params
.bp
= bp
;
2686 bp
->link_params
.port
= BP_PORT(bp
);
2687 bp
->link_params
.req_duplex
[0] = DUPLEX_FULL
;
2688 bp
->link_params
.req_flow_ctrl
[0] = BNX2X_FLOW_CTRL_NONE
;
2689 bp
->link_params
.req_line_speed
[0] = SPEED_10000
;
2690 bp
->link_params
.speed_cap_mask
[0] = 0x7f0000;
2691 bp
->link_params
.switch_cfg
= SWITCH_CFG_10G
;
2692 bp
->link_vars
.mac_type
= MAC_TYPE_BMAC
;
2693 bp
->link_vars
.line_speed
= SPEED_10000
;
2694 bp
->link_vars
.link_status
=
2695 (LINK_STATUS_LINK_UP
|
2696 LINK_STATUS_SPEED_AND_DUPLEX_10GTFD
);
2697 bp
->link_vars
.link_up
= 1;
2698 bp
->link_vars
.duplex
= DUPLEX_FULL
;
2699 bp
->link_vars
.flow_ctrl
= BNX2X_FLOW_CTRL_NONE
;
2700 __bnx2x_link_report(bp
);
2702 bnx2x_sample_bulletin(bp
);
2704 /* if bulletin board did not have an update for link status
2705 * __bnx2x_link_report will report current status
2706 * but it will NOT duplicate report in case of already reported
2707 * during sampling bulletin board.
2709 bnx2x_stats_handle(bp
, STATS_EVENT_LINK_UP
);
2713 static int bnx2x_afex_func_update(struct bnx2x
*bp
, u16 vifid
,
2714 u16 vlan_val
, u8 allowed_prio
)
2716 struct bnx2x_func_state_params func_params
= {NULL
};
2717 struct bnx2x_func_afex_update_params
*f_update_params
=
2718 &func_params
.params
.afex_update
;
2720 func_params
.f_obj
= &bp
->func_obj
;
2721 func_params
.cmd
= BNX2X_F_CMD_AFEX_UPDATE
;
2723 /* no need to wait for RAMROD completion, so don't
2724 * set RAMROD_COMP_WAIT flag
2727 f_update_params
->vif_id
= vifid
;
2728 f_update_params
->afex_default_vlan
= vlan_val
;
2729 f_update_params
->allowed_priorities
= allowed_prio
;
2731 /* if ramrod can not be sent, response to MCP immediately */
2732 if (bnx2x_func_state_change(bp
, &func_params
) < 0)
2733 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_VIFSET_ACK
, 0);
2738 static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x
*bp
, u8 cmd_type
,
2739 u16 vif_index
, u8 func_bit_map
)
2741 struct bnx2x_func_state_params func_params
= {NULL
};
2742 struct bnx2x_func_afex_viflists_params
*update_params
=
2743 &func_params
.params
.afex_viflists
;
2747 /* validate only LIST_SET and LIST_GET are received from switch */
2748 if ((cmd_type
!= VIF_LIST_RULE_GET
) && (cmd_type
!= VIF_LIST_RULE_SET
))
2749 BNX2X_ERR("BUG! afex_handle_vif_list_cmd invalid type 0x%x\n",
2752 func_params
.f_obj
= &bp
->func_obj
;
2753 func_params
.cmd
= BNX2X_F_CMD_AFEX_VIFLISTS
;
2755 /* set parameters according to cmd_type */
2756 update_params
->afex_vif_list_command
= cmd_type
;
2757 update_params
->vif_list_index
= vif_index
;
2758 update_params
->func_bit_map
=
2759 (cmd_type
== VIF_LIST_RULE_GET
) ? 0 : func_bit_map
;
2760 update_params
->func_to_clear
= 0;
2762 (cmd_type
== VIF_LIST_RULE_GET
) ?
2763 DRV_MSG_CODE_AFEX_LISTGET_ACK
:
2764 DRV_MSG_CODE_AFEX_LISTSET_ACK
;
2766 /* if ramrod can not be sent, respond to MCP immediately for
2767 * SET and GET requests (other are not triggered from MCP)
2769 rc
= bnx2x_func_state_change(bp
, &func_params
);
2771 bnx2x_fw_command(bp
, drv_msg_code
, 0);
2776 static void bnx2x_handle_afex_cmd(struct bnx2x
*bp
, u32 cmd
)
2778 struct afex_stats afex_stats
;
2779 u32 func
= BP_ABS_FUNC(bp
);
2786 u32 addr_to_write
, vifid
, addrs
, stats_type
, i
;
2788 if (cmd
& DRV_STATUS_AFEX_LISTGET_REQ
) {
2789 vifid
= SHMEM2_RD(bp
, afex_param1_to_driver
[BP_FW_MB_IDX(bp
)]);
2791 "afex: got MCP req LISTGET_REQ for vifid 0x%x\n", vifid
);
2792 bnx2x_afex_handle_vif_list_cmd(bp
, VIF_LIST_RULE_GET
, vifid
, 0);
2795 if (cmd
& DRV_STATUS_AFEX_LISTSET_REQ
) {
2796 vifid
= SHMEM2_RD(bp
, afex_param1_to_driver
[BP_FW_MB_IDX(bp
)]);
2797 addrs
= SHMEM2_RD(bp
, afex_param2_to_driver
[BP_FW_MB_IDX(bp
)]);
2799 "afex: got MCP req LISTSET_REQ for vifid 0x%x addrs 0x%x\n",
2801 bnx2x_afex_handle_vif_list_cmd(bp
, VIF_LIST_RULE_SET
, vifid
,
2805 if (cmd
& DRV_STATUS_AFEX_STATSGET_REQ
) {
2806 addr_to_write
= SHMEM2_RD(bp
,
2807 afex_scratchpad_addr_to_write
[BP_FW_MB_IDX(bp
)]);
2808 stats_type
= SHMEM2_RD(bp
,
2809 afex_param1_to_driver
[BP_FW_MB_IDX(bp
)]);
2812 "afex: got MCP req STATSGET_REQ, write to addr 0x%x\n",
2815 bnx2x_afex_collect_stats(bp
, (void *)&afex_stats
, stats_type
);
2817 /* write response to scratchpad, for MCP */
2818 for (i
= 0; i
< (sizeof(struct afex_stats
)/sizeof(u32
)); i
++)
2819 REG_WR(bp
, addr_to_write
+ i
*sizeof(u32
),
2820 *(((u32
*)(&afex_stats
))+i
));
2822 /* send ack message to MCP */
2823 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_STATSGET_ACK
, 0);
2826 if (cmd
& DRV_STATUS_AFEX_VIFSET_REQ
) {
2827 mf_config
= MF_CFG_RD(bp
, func_mf_config
[func
].config
);
2828 bp
->mf_config
[BP_VN(bp
)] = mf_config
;
2830 "afex: got MCP req VIFSET_REQ, mf_config 0x%x\n",
2833 /* if VIF_SET is "enabled" */
2834 if (!(mf_config
& FUNC_MF_CFG_FUNC_DISABLED
)) {
2835 /* set rate limit directly to internal RAM */
2836 struct cmng_init_input cmng_input
;
2837 struct rate_shaping_vars_per_vn m_rs_vn
;
2838 size_t size
= sizeof(struct rate_shaping_vars_per_vn
);
2839 u32 addr
= BAR_XSTRORM_INTMEM
+
2840 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(BP_FUNC(bp
));
2842 bp
->mf_config
[BP_VN(bp
)] = mf_config
;
2844 bnx2x_calc_vn_max(bp
, BP_VN(bp
), &cmng_input
);
2845 m_rs_vn
.vn_counter
.rate
=
2846 cmng_input
.vnic_max_rate
[BP_VN(bp
)];
2847 m_rs_vn
.vn_counter
.quota
=
2848 (m_rs_vn
.vn_counter
.rate
*
2849 RS_PERIODIC_TIMEOUT_USEC
) / 8;
2851 __storm_memset_struct(bp
, addr
, size
, (u32
*)&m_rs_vn
);
2853 /* read relevant values from mf_cfg struct in shmem */
2855 (MF_CFG_RD(bp
, func_mf_config
[func
].e1hov_tag
) &
2856 FUNC_MF_CFG_E1HOV_TAG_MASK
) >>
2857 FUNC_MF_CFG_E1HOV_TAG_SHIFT
;
2859 (MF_CFG_RD(bp
, func_mf_config
[func
].e1hov_tag
) &
2860 FUNC_MF_CFG_AFEX_VLAN_MASK
) >>
2861 FUNC_MF_CFG_AFEX_VLAN_SHIFT
;
2862 vlan_prio
= (mf_config
&
2863 FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK
) >>
2864 FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT
;
2865 vlan_val
|= (vlan_prio
<< VLAN_PRIO_SHIFT
);
2868 func_mf_config
[func
].afex_config
) &
2869 FUNC_MF_CFG_AFEX_VLAN_MODE_MASK
) >>
2870 FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT
;
2873 func_mf_config
[func
].afex_config
) &
2874 FUNC_MF_CFG_AFEX_COS_FILTER_MASK
) >>
2875 FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT
;
2877 /* send ramrod to FW, return in case of failure */
2878 if (bnx2x_afex_func_update(bp
, vif_id
, vlan_val
,
2882 bp
->afex_def_vlan_tag
= vlan_val
;
2883 bp
->afex_vlan_mode
= vlan_mode
;
2885 /* notify link down because BP->flags is disabled */
2886 bnx2x_link_report(bp
);
2888 /* send INVALID VIF ramrod to FW */
2889 bnx2x_afex_func_update(bp
, 0xFFFF, 0, 0);
2891 /* Reset the default afex VLAN */
2892 bp
->afex_def_vlan_tag
= -1;
2897 static void bnx2x_pmf_update(struct bnx2x
*bp
)
2899 int port
= BP_PORT(bp
);
2903 DP(BNX2X_MSG_MCP
, "pmf %d\n", bp
->port
.pmf
);
2906 * We need the mb() to ensure the ordering between the writing to
2907 * bp->port.pmf here and reading it from the bnx2x_periodic_task().
2911 /* queue a periodic task */
2912 queue_delayed_work(bnx2x_wq
, &bp
->period_task
, 0);
2914 bnx2x_dcbx_pmf_update(bp
);
2916 /* enable nig attention */
2917 val
= (0xff0f | (1 << (BP_VN(bp
) + 4)));
2918 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
2919 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, val
);
2920 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, val
);
2921 } else if (!CHIP_IS_E1x(bp
)) {
2922 REG_WR(bp
, IGU_REG_TRAILING_EDGE_LATCH
, val
);
2923 REG_WR(bp
, IGU_REG_LEADING_EDGE_LATCH
, val
);
2926 bnx2x_stats_handle(bp
, STATS_EVENT_PMF
);
2934 * General service functions
2937 /* send the MCP a request, block until there is a reply */
2938 u32
bnx2x_fw_command(struct bnx2x
*bp
, u32 command
, u32 param
)
2940 int mb_idx
= BP_FW_MB_IDX(bp
);
2944 u8 delay
= CHIP_REV_IS_SLOW(bp
) ? 100 : 10;
2946 mutex_lock(&bp
->fw_mb_mutex
);
2948 SHMEM_WR(bp
, func_mb
[mb_idx
].drv_mb_param
, param
);
2949 SHMEM_WR(bp
, func_mb
[mb_idx
].drv_mb_header
, (command
| seq
));
2951 DP(BNX2X_MSG_MCP
, "wrote command (%x) to FW MB param 0x%08x\n",
2952 (command
| seq
), param
);
2955 /* let the FW do it's magic ... */
2958 rc
= SHMEM_RD(bp
, func_mb
[mb_idx
].fw_mb_header
);
2960 /* Give the FW up to 5 second (500*10ms) */
2961 } while ((seq
!= (rc
& FW_MSG_SEQ_NUMBER_MASK
)) && (cnt
++ < 500));
2963 DP(BNX2X_MSG_MCP
, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
2964 cnt
*delay
, rc
, seq
);
2966 /* is this a reply to our command? */
2967 if (seq
== (rc
& FW_MSG_SEQ_NUMBER_MASK
))
2968 rc
&= FW_MSG_CODE_MASK
;
2971 BNX2X_ERR("FW failed to respond!\n");
2975 mutex_unlock(&bp
->fw_mb_mutex
);
2980 static void storm_memset_func_cfg(struct bnx2x
*bp
,
2981 struct tstorm_eth_function_common_config
*tcfg
,
2984 size_t size
= sizeof(struct tstorm_eth_function_common_config
);
2986 u32 addr
= BAR_TSTRORM_INTMEM
+
2987 TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid
);
2989 __storm_memset_struct(bp
, addr
, size
, (u32
*)tcfg
);
2992 void bnx2x_func_init(struct bnx2x
*bp
, struct bnx2x_func_init_params
*p
)
2994 if (CHIP_IS_E1x(bp
)) {
2995 struct tstorm_eth_function_common_config tcfg
= {0};
2997 storm_memset_func_cfg(bp
, &tcfg
, p
->func_id
);
3000 /* Enable the function in the FW */
3001 storm_memset_vf_to_pf(bp
, p
->func_id
, p
->pf_id
);
3002 storm_memset_func_en(bp
, p
->func_id
, 1);
3005 if (p
->func_flgs
& FUNC_FLG_SPQ
) {
3006 storm_memset_spq_addr(bp
, p
->spq_map
, p
->func_id
);
3007 REG_WR(bp
, XSEM_REG_FAST_MEMORY
+
3008 XSTORM_SPQ_PROD_OFFSET(p
->func_id
), p
->spq_prod
);
3013 * bnx2x_get_common_flags - Return common flags
3017 * @zero_stats TRUE if statistics zeroing is needed
3019 * Return the flags that are common for the Tx-only and not normal connections.
3021 static unsigned long bnx2x_get_common_flags(struct bnx2x
*bp
,
3022 struct bnx2x_fastpath
*fp
,
3025 unsigned long flags
= 0;
3027 /* PF driver will always initialize the Queue to an ACTIVE state */
3028 __set_bit(BNX2X_Q_FLG_ACTIVE
, &flags
);
3030 /* tx only connections collect statistics (on the same index as the
3031 * parent connection). The statistics are zeroed when the parent
3032 * connection is initialized.
3035 __set_bit(BNX2X_Q_FLG_STATS
, &flags
);
3037 __set_bit(BNX2X_Q_FLG_ZERO_STATS
, &flags
);
3039 if (bp
->flags
& TX_SWITCHING
)
3040 __set_bit(BNX2X_Q_FLG_TX_SWITCH
, &flags
);
3042 __set_bit(BNX2X_Q_FLG_PCSUM_ON_PKT
, &flags
);
3043 __set_bit(BNX2X_Q_FLG_TUN_INC_INNER_IP_ID
, &flags
);
3045 #ifdef BNX2X_STOP_ON_ERROR
3046 __set_bit(BNX2X_Q_FLG_TX_SEC
, &flags
);
3052 static unsigned long bnx2x_get_q_flags(struct bnx2x
*bp
,
3053 struct bnx2x_fastpath
*fp
,
3056 unsigned long flags
= 0;
3058 /* calculate other queue flags */
3060 __set_bit(BNX2X_Q_FLG_OV
, &flags
);
3062 if (IS_FCOE_FP(fp
)) {
3063 __set_bit(BNX2X_Q_FLG_FCOE
, &flags
);
3064 /* For FCoE - force usage of default priority (for afex) */
3065 __set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI
, &flags
);
3068 if (!fp
->disable_tpa
) {
3069 __set_bit(BNX2X_Q_FLG_TPA
, &flags
);
3070 __set_bit(BNX2X_Q_FLG_TPA_IPV6
, &flags
);
3071 if (fp
->mode
== TPA_MODE_GRO
)
3072 __set_bit(BNX2X_Q_FLG_TPA_GRO
, &flags
);
3076 __set_bit(BNX2X_Q_FLG_LEADING_RSS
, &flags
);
3077 __set_bit(BNX2X_Q_FLG_MCAST
, &flags
);
3080 /* Always set HW VLAN stripping */
3081 __set_bit(BNX2X_Q_FLG_VLAN
, &flags
);
3083 /* configure silent vlan removal */
3085 __set_bit(BNX2X_Q_FLG_SILENT_VLAN_REM
, &flags
);
3087 return flags
| bnx2x_get_common_flags(bp
, fp
, true);
3090 static void bnx2x_pf_q_prep_general(struct bnx2x
*bp
,
3091 struct bnx2x_fastpath
*fp
, struct bnx2x_general_setup_params
*gen_init
,
3094 gen_init
->stat_id
= bnx2x_stats_id(fp
);
3095 gen_init
->spcl_id
= fp
->cl_id
;
3097 /* Always use mini-jumbo MTU for FCoE L2 ring */
3099 gen_init
->mtu
= BNX2X_FCOE_MINI_JUMBO_MTU
;
3101 gen_init
->mtu
= bp
->dev
->mtu
;
3103 gen_init
->cos
= cos
;
3106 static void bnx2x_pf_rx_q_prep(struct bnx2x
*bp
,
3107 struct bnx2x_fastpath
*fp
, struct rxq_pause_params
*pause
,
3108 struct bnx2x_rxq_setup_params
*rxq_init
)
3112 u16 tpa_agg_size
= 0;
3114 if (!fp
->disable_tpa
) {
3115 pause
->sge_th_lo
= SGE_TH_LO(bp
);
3116 pause
->sge_th_hi
= SGE_TH_HI(bp
);
3118 /* validate SGE ring has enough to cross high threshold */
3119 WARN_ON(bp
->dropless_fc
&&
3120 pause
->sge_th_hi
+ FW_PREFETCH_CNT
>
3121 MAX_RX_SGE_CNT
* NUM_RX_SGE_PAGES
);
3123 tpa_agg_size
= TPA_AGG_SIZE
;
3124 max_sge
= SGE_PAGE_ALIGN(bp
->dev
->mtu
) >>
3126 max_sge
= ((max_sge
+ PAGES_PER_SGE
- 1) &
3127 (~(PAGES_PER_SGE
-1))) >> PAGES_PER_SGE_SHIFT
;
3128 sge_sz
= (u16
)min_t(u32
, SGE_PAGES
, 0xffff);
3131 /* pause - not for e1 */
3132 if (!CHIP_IS_E1(bp
)) {
3133 pause
->bd_th_lo
= BD_TH_LO(bp
);
3134 pause
->bd_th_hi
= BD_TH_HI(bp
);
3136 pause
->rcq_th_lo
= RCQ_TH_LO(bp
);
3137 pause
->rcq_th_hi
= RCQ_TH_HI(bp
);
3139 * validate that rings have enough entries to cross
3142 WARN_ON(bp
->dropless_fc
&&
3143 pause
->bd_th_hi
+ FW_PREFETCH_CNT
>
3145 WARN_ON(bp
->dropless_fc
&&
3146 pause
->rcq_th_hi
+ FW_PREFETCH_CNT
>
3147 NUM_RCQ_RINGS
* MAX_RCQ_DESC_CNT
);
3153 rxq_init
->dscr_map
= fp
->rx_desc_mapping
;
3154 rxq_init
->sge_map
= fp
->rx_sge_mapping
;
3155 rxq_init
->rcq_map
= fp
->rx_comp_mapping
;
3156 rxq_init
->rcq_np_map
= fp
->rx_comp_mapping
+ BCM_PAGE_SIZE
;
3158 /* This should be a maximum number of data bytes that may be
3159 * placed on the BD (not including paddings).
3161 rxq_init
->buf_sz
= fp
->rx_buf_size
- BNX2X_FW_RX_ALIGN_START
-
3162 BNX2X_FW_RX_ALIGN_END
- IP_HEADER_ALIGNMENT_PADDING
;
3164 rxq_init
->cl_qzone_id
= fp
->cl_qzone_id
;
3165 rxq_init
->tpa_agg_sz
= tpa_agg_size
;
3166 rxq_init
->sge_buf_sz
= sge_sz
;
3167 rxq_init
->max_sges_pkt
= max_sge
;
3168 rxq_init
->rss_engine_id
= BP_FUNC(bp
);
3169 rxq_init
->mcast_engine_id
= BP_FUNC(bp
);
3171 /* Maximum number or simultaneous TPA aggregation for this Queue.
3173 * For PF Clients it should be the maximum available number.
3174 * VF driver(s) may want to define it to a smaller value.
3176 rxq_init
->max_tpa_queues
= MAX_AGG_QS(bp
);
3178 rxq_init
->cache_line_log
= BNX2X_RX_ALIGN_SHIFT
;
3179 rxq_init
->fw_sb_id
= fp
->fw_sb_id
;
3182 rxq_init
->sb_cq_index
= HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS
;
3184 rxq_init
->sb_cq_index
= HC_INDEX_ETH_RX_CQ_CONS
;
3185 /* configure silent vlan removal
3186 * if multi function mode is afex, then mask default vlan
3188 if (IS_MF_AFEX(bp
)) {
3189 rxq_init
->silent_removal_value
= bp
->afex_def_vlan_tag
;
3190 rxq_init
->silent_removal_mask
= VLAN_VID_MASK
;
3194 static void bnx2x_pf_tx_q_prep(struct bnx2x
*bp
,
3195 struct bnx2x_fastpath
*fp
, struct bnx2x_txq_setup_params
*txq_init
,
3198 txq_init
->dscr_map
= fp
->txdata_ptr
[cos
]->tx_desc_mapping
;
3199 txq_init
->sb_cq_index
= HC_INDEX_ETH_FIRST_TX_CQ_CONS
+ cos
;
3200 txq_init
->traffic_type
= LLFC_TRAFFIC_TYPE_NW
;
3201 txq_init
->fw_sb_id
= fp
->fw_sb_id
;
3204 * set the tss leading client id for TX classification ==
3205 * leading RSS client id
3207 txq_init
->tss_leading_cl_id
= bnx2x_fp(bp
, 0, cl_id
);
3209 if (IS_FCOE_FP(fp
)) {
3210 txq_init
->sb_cq_index
= HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS
;
3211 txq_init
->traffic_type
= LLFC_TRAFFIC_TYPE_FCOE
;
3215 static void bnx2x_pf_init(struct bnx2x
*bp
)
3217 struct bnx2x_func_init_params func_init
= {0};
3218 struct event_ring_data eq_data
= { {0} };
3221 if (!CHIP_IS_E1x(bp
)) {
3222 /* reset IGU PF statistics: MSIX + ATTN */
3224 REG_WR(bp
, IGU_REG_STATISTIC_NUM_MESSAGE_SENT
+
3225 BNX2X_IGU_STAS_MSG_VF_CNT
*4 +
3226 (CHIP_MODE_IS_4_PORT(bp
) ?
3227 BP_FUNC(bp
) : BP_VN(bp
))*4, 0);
3229 REG_WR(bp
, IGU_REG_STATISTIC_NUM_MESSAGE_SENT
+
3230 BNX2X_IGU_STAS_MSG_VF_CNT
*4 +
3231 BNX2X_IGU_STAS_MSG_PF_CNT
*4 +
3232 (CHIP_MODE_IS_4_PORT(bp
) ?
3233 BP_FUNC(bp
) : BP_VN(bp
))*4, 0);
3236 /* function setup flags */
3237 flags
= (FUNC_FLG_STATS
| FUNC_FLG_LEADING
| FUNC_FLG_SPQ
);
3239 /* This flag is relevant for E1x only.
3240 * E2 doesn't have a TPA configuration in a function level.
3242 flags
|= (bp
->flags
& TPA_ENABLE_FLAG
) ? FUNC_FLG_TPA
: 0;
3244 func_init
.func_flgs
= flags
;
3245 func_init
.pf_id
= BP_FUNC(bp
);
3246 func_init
.func_id
= BP_FUNC(bp
);
3247 func_init
.spq_map
= bp
->spq_mapping
;
3248 func_init
.spq_prod
= bp
->spq_prod_idx
;
3250 bnx2x_func_init(bp
, &func_init
);
3252 memset(&(bp
->cmng
), 0, sizeof(struct cmng_struct_per_port
));
3255 * Congestion management values depend on the link rate
3256 * There is no active link so initial link rate is set to 10 Gbps.
3257 * When the link comes up The congestion management values are
3258 * re-calculated according to the actual link rate.
3260 bp
->link_vars
.line_speed
= SPEED_10000
;
3261 bnx2x_cmng_fns_init(bp
, true, bnx2x_get_cmng_fns_mode(bp
));
3263 /* Only the PMF sets the HW */
3265 storm_memset_cmng(bp
, &bp
->cmng
, BP_PORT(bp
));
3267 /* init Event Queue - PCI bus guarantees correct endianity*/
3268 eq_data
.base_addr
.hi
= U64_HI(bp
->eq_mapping
);
3269 eq_data
.base_addr
.lo
= U64_LO(bp
->eq_mapping
);
3270 eq_data
.producer
= bp
->eq_prod
;
3271 eq_data
.index_id
= HC_SP_INDEX_EQ_CONS
;
3272 eq_data
.sb_id
= DEF_SB_ID
;
3273 storm_memset_eq_data(bp
, &eq_data
, BP_FUNC(bp
));
3276 static void bnx2x_e1h_disable(struct bnx2x
*bp
)
3278 int port
= BP_PORT(bp
);
3280 bnx2x_tx_disable(bp
);
3282 REG_WR(bp
, NIG_REG_LLH0_FUNC_EN
+ port
*8, 0);
3285 static void bnx2x_e1h_enable(struct bnx2x
*bp
)
3287 int port
= BP_PORT(bp
);
3289 REG_WR(bp
, NIG_REG_LLH0_FUNC_EN
+ port
*8, 1);
3291 /* Tx queue should be only re-enabled */
3292 netif_tx_wake_all_queues(bp
->dev
);
3295 * Should not call netif_carrier_on since it will be called if the link
3296 * is up when checking for link state
3300 #define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
3302 static void bnx2x_drv_info_ether_stat(struct bnx2x
*bp
)
3304 struct eth_stats_info
*ether_stat
=
3305 &bp
->slowpath
->drv_info_to_mcp
.ether_stat
;
3306 struct bnx2x_vlan_mac_obj
*mac_obj
=
3307 &bp
->sp_objs
->mac_obj
;
3310 strlcpy(ether_stat
->version
, DRV_MODULE_VERSION
,
3311 ETH_STAT_INFO_VERSION_LEN
);
3313 /* get DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED macs, placing them in the
3314 * mac_local field in ether_stat struct. The base address is offset by 2
3315 * bytes to account for the field being 8 bytes but a mac address is
3316 * only 6 bytes. Likewise, the stride for the get_n_elements function is
3317 * 2 bytes to compensate from the 6 bytes of a mac to the 8 bytes
3318 * allocated by the ether_stat struct, so the macs will land in their
3321 for (i
= 0; i
< DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED
; i
++)
3322 memset(ether_stat
->mac_local
+ i
, 0,
3323 sizeof(ether_stat
->mac_local
[0]));
3324 mac_obj
->get_n_elements(bp
, &bp
->sp_objs
[0].mac_obj
,
3325 DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED
,
3326 ether_stat
->mac_local
+ MAC_PAD
, MAC_PAD
,
3328 ether_stat
->mtu_size
= bp
->dev
->mtu
;
3329 if (bp
->dev
->features
& NETIF_F_RXCSUM
)
3330 ether_stat
->feature_flags
|= FEATURE_ETH_CHKSUM_OFFLOAD_MASK
;
3331 if (bp
->dev
->features
& NETIF_F_TSO
)
3332 ether_stat
->feature_flags
|= FEATURE_ETH_LSO_MASK
;
3333 ether_stat
->feature_flags
|= bp
->common
.boot_mode
;
3335 ether_stat
->promiscuous_mode
= (bp
->dev
->flags
& IFF_PROMISC
) ? 1 : 0;
3337 ether_stat
->txq_size
= bp
->tx_ring_size
;
3338 ether_stat
->rxq_size
= bp
->rx_ring_size
;
3340 #ifdef CONFIG_BNX2X_SRIOV
3341 ether_stat
->vf_cnt
= IS_SRIOV(bp
) ? bp
->vfdb
->sriov
.nr_virtfn
: 0;
3345 static void bnx2x_drv_info_fcoe_stat(struct bnx2x
*bp
)
3347 struct bnx2x_dcbx_app_params
*app
= &bp
->dcbx_port_params
.app
;
3348 struct fcoe_stats_info
*fcoe_stat
=
3349 &bp
->slowpath
->drv_info_to_mcp
.fcoe_stat
;
3351 if (!CNIC_LOADED(bp
))
3354 memcpy(fcoe_stat
->mac_local
+ MAC_PAD
, bp
->fip_mac
, ETH_ALEN
);
3356 fcoe_stat
->qos_priority
=
3357 app
->traffic_type_priority
[LLFC_TRAFFIC_TYPE_FCOE
];
3359 /* insert FCoE stats from ramrod response */
3361 struct tstorm_per_queue_stats
*fcoe_q_tstorm_stats
=
3362 &bp
->fw_stats_data
->queue_stats
[FCOE_IDX(bp
)].
3363 tstorm_queue_statistics
;
3365 struct xstorm_per_queue_stats
*fcoe_q_xstorm_stats
=
3366 &bp
->fw_stats_data
->queue_stats
[FCOE_IDX(bp
)].
3367 xstorm_queue_statistics
;
3369 struct fcoe_statistics_params
*fw_fcoe_stat
=
3370 &bp
->fw_stats_data
->fcoe
;
3372 ADD_64_LE(fcoe_stat
->rx_bytes_hi
, LE32_0
,
3373 fcoe_stat
->rx_bytes_lo
,
3374 fw_fcoe_stat
->rx_stat0
.fcoe_rx_byte_cnt
);
3376 ADD_64_LE(fcoe_stat
->rx_bytes_hi
,
3377 fcoe_q_tstorm_stats
->rcv_ucast_bytes
.hi
,
3378 fcoe_stat
->rx_bytes_lo
,
3379 fcoe_q_tstorm_stats
->rcv_ucast_bytes
.lo
);
3381 ADD_64_LE(fcoe_stat
->rx_bytes_hi
,
3382 fcoe_q_tstorm_stats
->rcv_bcast_bytes
.hi
,
3383 fcoe_stat
->rx_bytes_lo
,
3384 fcoe_q_tstorm_stats
->rcv_bcast_bytes
.lo
);
3386 ADD_64_LE(fcoe_stat
->rx_bytes_hi
,
3387 fcoe_q_tstorm_stats
->rcv_mcast_bytes
.hi
,
3388 fcoe_stat
->rx_bytes_lo
,
3389 fcoe_q_tstorm_stats
->rcv_mcast_bytes
.lo
);
3391 ADD_64_LE(fcoe_stat
->rx_frames_hi
, LE32_0
,
3392 fcoe_stat
->rx_frames_lo
,
3393 fw_fcoe_stat
->rx_stat0
.fcoe_rx_pkt_cnt
);
3395 ADD_64_LE(fcoe_stat
->rx_frames_hi
, LE32_0
,
3396 fcoe_stat
->rx_frames_lo
,
3397 fcoe_q_tstorm_stats
->rcv_ucast_pkts
);
3399 ADD_64_LE(fcoe_stat
->rx_frames_hi
, LE32_0
,
3400 fcoe_stat
->rx_frames_lo
,
3401 fcoe_q_tstorm_stats
->rcv_bcast_pkts
);
3403 ADD_64_LE(fcoe_stat
->rx_frames_hi
, LE32_0
,
3404 fcoe_stat
->rx_frames_lo
,
3405 fcoe_q_tstorm_stats
->rcv_mcast_pkts
);
3407 ADD_64_LE(fcoe_stat
->tx_bytes_hi
, LE32_0
,
3408 fcoe_stat
->tx_bytes_lo
,
3409 fw_fcoe_stat
->tx_stat
.fcoe_tx_byte_cnt
);
3411 ADD_64_LE(fcoe_stat
->tx_bytes_hi
,
3412 fcoe_q_xstorm_stats
->ucast_bytes_sent
.hi
,
3413 fcoe_stat
->tx_bytes_lo
,
3414 fcoe_q_xstorm_stats
->ucast_bytes_sent
.lo
);
3416 ADD_64_LE(fcoe_stat
->tx_bytes_hi
,
3417 fcoe_q_xstorm_stats
->bcast_bytes_sent
.hi
,
3418 fcoe_stat
->tx_bytes_lo
,
3419 fcoe_q_xstorm_stats
->bcast_bytes_sent
.lo
);
3421 ADD_64_LE(fcoe_stat
->tx_bytes_hi
,
3422 fcoe_q_xstorm_stats
->mcast_bytes_sent
.hi
,
3423 fcoe_stat
->tx_bytes_lo
,
3424 fcoe_q_xstorm_stats
->mcast_bytes_sent
.lo
);
3426 ADD_64_LE(fcoe_stat
->tx_frames_hi
, LE32_0
,
3427 fcoe_stat
->tx_frames_lo
,
3428 fw_fcoe_stat
->tx_stat
.fcoe_tx_pkt_cnt
);
3430 ADD_64_LE(fcoe_stat
->tx_frames_hi
, LE32_0
,
3431 fcoe_stat
->tx_frames_lo
,
3432 fcoe_q_xstorm_stats
->ucast_pkts_sent
);
3434 ADD_64_LE(fcoe_stat
->tx_frames_hi
, LE32_0
,
3435 fcoe_stat
->tx_frames_lo
,
3436 fcoe_q_xstorm_stats
->bcast_pkts_sent
);
3438 ADD_64_LE(fcoe_stat
->tx_frames_hi
, LE32_0
,
3439 fcoe_stat
->tx_frames_lo
,
3440 fcoe_q_xstorm_stats
->mcast_pkts_sent
);
3443 /* ask L5 driver to add data to the struct */
3444 bnx2x_cnic_notify(bp
, CNIC_CTL_FCOE_STATS_GET_CMD
);
3447 static void bnx2x_drv_info_iscsi_stat(struct bnx2x
*bp
)
3449 struct bnx2x_dcbx_app_params
*app
= &bp
->dcbx_port_params
.app
;
3450 struct iscsi_stats_info
*iscsi_stat
=
3451 &bp
->slowpath
->drv_info_to_mcp
.iscsi_stat
;
3453 if (!CNIC_LOADED(bp
))
3456 memcpy(iscsi_stat
->mac_local
+ MAC_PAD
, bp
->cnic_eth_dev
.iscsi_mac
,
3459 iscsi_stat
->qos_priority
=
3460 app
->traffic_type_priority
[LLFC_TRAFFIC_TYPE_ISCSI
];
3462 /* ask L5 driver to add data to the struct */
3463 bnx2x_cnic_notify(bp
, CNIC_CTL_ISCSI_STATS_GET_CMD
);
3466 /* called due to MCP event (on pmf):
3467 * reread new bandwidth configuration
3469 * notify others function about the change
3471 static void bnx2x_config_mf_bw(struct bnx2x
*bp
)
3473 if (bp
->link_vars
.link_up
) {
3474 bnx2x_cmng_fns_init(bp
, true, CMNG_FNS_MINMAX
);
3475 bnx2x_link_sync_notify(bp
);
3477 storm_memset_cmng(bp
, &bp
->cmng
, BP_PORT(bp
));
3480 static void bnx2x_set_mf_bw(struct bnx2x
*bp
)
3482 bnx2x_config_mf_bw(bp
);
3483 bnx2x_fw_command(bp
, DRV_MSG_CODE_SET_MF_BW_ACK
, 0);
3486 static void bnx2x_handle_eee_event(struct bnx2x
*bp
)
3488 DP(BNX2X_MSG_MCP
, "EEE - LLDP event\n");
3489 bnx2x_fw_command(bp
, DRV_MSG_CODE_EEE_RESULTS_ACK
, 0);
3492 #define BNX2X_UPDATE_DRV_INFO_IND_LENGTH (20)
3493 #define BNX2X_UPDATE_DRV_INFO_IND_COUNT (25)
3495 static void bnx2x_handle_drv_info_req(struct bnx2x
*bp
)
3497 enum drv_info_opcode op_code
;
3498 u32 drv_info_ctl
= SHMEM2_RD(bp
, drv_info_control
);
3499 bool release
= false;
3502 /* if drv_info version supported by MFW doesn't match - send NACK */
3503 if ((drv_info_ctl
& DRV_INFO_CONTROL_VER_MASK
) != DRV_INFO_CUR_VER
) {
3504 bnx2x_fw_command(bp
, DRV_MSG_CODE_DRV_INFO_NACK
, 0);
3508 op_code
= (drv_info_ctl
& DRV_INFO_CONTROL_OP_CODE_MASK
) >>
3509 DRV_INFO_CONTROL_OP_CODE_SHIFT
;
3511 /* Must prevent other flows from accessing drv_info_to_mcp */
3512 mutex_lock(&bp
->drv_info_mutex
);
3514 memset(&bp
->slowpath
->drv_info_to_mcp
, 0,
3515 sizeof(union drv_info_to_mcp
));
3518 case ETH_STATS_OPCODE
:
3519 bnx2x_drv_info_ether_stat(bp
);
3521 case FCOE_STATS_OPCODE
:
3522 bnx2x_drv_info_fcoe_stat(bp
);
3524 case ISCSI_STATS_OPCODE
:
3525 bnx2x_drv_info_iscsi_stat(bp
);
3528 /* if op code isn't supported - send NACK */
3529 bnx2x_fw_command(bp
, DRV_MSG_CODE_DRV_INFO_NACK
, 0);
3533 /* if we got drv_info attn from MFW then these fields are defined in
3536 SHMEM2_WR(bp
, drv_info_host_addr_lo
,
3537 U64_LO(bnx2x_sp_mapping(bp
, drv_info_to_mcp
)));
3538 SHMEM2_WR(bp
, drv_info_host_addr_hi
,
3539 U64_HI(bnx2x_sp_mapping(bp
, drv_info_to_mcp
)));
3541 bnx2x_fw_command(bp
, DRV_MSG_CODE_DRV_INFO_ACK
, 0);
3543 /* Since possible management wants both this and get_driver_version
3544 * need to wait until management notifies us it finished utilizing
3547 if (!SHMEM2_HAS(bp
, mfw_drv_indication
)) {
3548 DP(BNX2X_MSG_MCP
, "Management does not support indication\n");
3549 } else if (!bp
->drv_info_mng_owner
) {
3550 u32 bit
= MFW_DRV_IND_READ_DONE_OFFSET((BP_ABS_FUNC(bp
) >> 1));
3552 for (wait
= 0; wait
< BNX2X_UPDATE_DRV_INFO_IND_COUNT
; wait
++) {
3553 u32 indication
= SHMEM2_RD(bp
, mfw_drv_indication
);
3555 /* Management is done; need to clear indication */
3556 if (indication
& bit
) {
3557 SHMEM2_WR(bp
, mfw_drv_indication
,
3563 msleep(BNX2X_UPDATE_DRV_INFO_IND_LENGTH
);
3567 DP(BNX2X_MSG_MCP
, "Management did not release indication\n");
3568 bp
->drv_info_mng_owner
= true;
3572 mutex_unlock(&bp
->drv_info_mutex
);
3575 static u32
bnx2x_update_mng_version_utility(u8
*version
, bool bnx2x_format
)
3581 i
= sscanf(version
, "1.%c%hhd.%hhd.%hhd",
3582 &vals
[0], &vals
[1], &vals
[2], &vals
[3]);
3586 i
= sscanf(version
, "%hhd.%hhd.%hhd.%hhd",
3587 &vals
[0], &vals
[1], &vals
[2], &vals
[3]);
3593 return (vals
[0] << 24) | (vals
[1] << 16) | (vals
[2] << 8) | vals
[3];
3596 void bnx2x_update_mng_version(struct bnx2x
*bp
)
3598 u32 iscsiver
= DRV_VER_NOT_LOADED
;
3599 u32 fcoever
= DRV_VER_NOT_LOADED
;
3600 u32 ethver
= DRV_VER_NOT_LOADED
;
3601 int idx
= BP_FW_MB_IDX(bp
);
3604 if (!SHMEM2_HAS(bp
, func_os_drv_ver
))
3607 mutex_lock(&bp
->drv_info_mutex
);
3608 /* Must not proceed when `bnx2x_handle_drv_info_req' is feasible */
3609 if (bp
->drv_info_mng_owner
)
3612 if (bp
->state
!= BNX2X_STATE_OPEN
)
3615 /* Parse ethernet driver version */
3616 ethver
= bnx2x_update_mng_version_utility(DRV_MODULE_VERSION
, true);
3617 if (!CNIC_LOADED(bp
))
3620 /* Try getting storage driver version via cnic */
3621 memset(&bp
->slowpath
->drv_info_to_mcp
, 0,
3622 sizeof(union drv_info_to_mcp
));
3623 bnx2x_drv_info_iscsi_stat(bp
);
3624 version
= bp
->slowpath
->drv_info_to_mcp
.iscsi_stat
.version
;
3625 iscsiver
= bnx2x_update_mng_version_utility(version
, false);
3627 memset(&bp
->slowpath
->drv_info_to_mcp
, 0,
3628 sizeof(union drv_info_to_mcp
));
3629 bnx2x_drv_info_fcoe_stat(bp
);
3630 version
= bp
->slowpath
->drv_info_to_mcp
.fcoe_stat
.version
;
3631 fcoever
= bnx2x_update_mng_version_utility(version
, false);
3634 SHMEM2_WR(bp
, func_os_drv_ver
[idx
].versions
[DRV_PERS_ETHERNET
], ethver
);
3635 SHMEM2_WR(bp
, func_os_drv_ver
[idx
].versions
[DRV_PERS_ISCSI
], iscsiver
);
3636 SHMEM2_WR(bp
, func_os_drv_ver
[idx
].versions
[DRV_PERS_FCOE
], fcoever
);
3638 mutex_unlock(&bp
->drv_info_mutex
);
3640 DP(BNX2X_MSG_MCP
, "Setting driver version: ETH [%08x] iSCSI [%08x] FCoE [%08x]\n",
3641 ethver
, iscsiver
, fcoever
);
3644 static void bnx2x_dcc_event(struct bnx2x
*bp
, u32 dcc_event
)
3646 DP(BNX2X_MSG_MCP
, "dcc_event 0x%x\n", dcc_event
);
3648 if (dcc_event
& DRV_STATUS_DCC_DISABLE_ENABLE_PF
) {
3651 * This is the only place besides the function initialization
3652 * where the bp->flags can change so it is done without any
3655 if (bp
->mf_config
[BP_VN(bp
)] & FUNC_MF_CFG_FUNC_DISABLED
) {
3656 DP(BNX2X_MSG_MCP
, "mf_cfg function disabled\n");
3657 bp
->flags
|= MF_FUNC_DIS
;
3659 bnx2x_e1h_disable(bp
);
3661 DP(BNX2X_MSG_MCP
, "mf_cfg function enabled\n");
3662 bp
->flags
&= ~MF_FUNC_DIS
;
3664 bnx2x_e1h_enable(bp
);
3666 dcc_event
&= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF
;
3668 if (dcc_event
& DRV_STATUS_DCC_BANDWIDTH_ALLOCATION
) {
3669 bnx2x_config_mf_bw(bp
);
3670 dcc_event
&= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION
;
3673 /* Report results to MCP */
3675 bnx2x_fw_command(bp
, DRV_MSG_CODE_DCC_FAILURE
, 0);
3677 bnx2x_fw_command(bp
, DRV_MSG_CODE_DCC_OK
, 0);
3680 /* must be called under the spq lock */
3681 static struct eth_spe
*bnx2x_sp_get_next(struct bnx2x
*bp
)
3683 struct eth_spe
*next_spe
= bp
->spq_prod_bd
;
3685 if (bp
->spq_prod_bd
== bp
->spq_last_bd
) {
3686 bp
->spq_prod_bd
= bp
->spq
;
3687 bp
->spq_prod_idx
= 0;
3688 DP(BNX2X_MSG_SP
, "end of spq\n");
3696 /* must be called under the spq lock */
3697 static void bnx2x_sp_prod_update(struct bnx2x
*bp
)
3699 int func
= BP_FUNC(bp
);
3702 * Make sure that BD data is updated before writing the producer:
3703 * BD data is written to the memory, the producer is read from the
3704 * memory, thus we need a full memory barrier to ensure the ordering.
3708 REG_WR16(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_SPQ_PROD_OFFSET(func
),
3714 * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
3716 * @cmd: command to check
3717 * @cmd_type: command type
3719 static bool bnx2x_is_contextless_ramrod(int cmd
, int cmd_type
)
3721 if ((cmd_type
== NONE_CONNECTION_TYPE
) ||
3722 (cmd
== RAMROD_CMD_ID_ETH_FORWARD_SETUP
) ||
3723 (cmd
== RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES
) ||
3724 (cmd
== RAMROD_CMD_ID_ETH_FILTER_RULES
) ||
3725 (cmd
== RAMROD_CMD_ID_ETH_MULTICAST_RULES
) ||
3726 (cmd
== RAMROD_CMD_ID_ETH_SET_MAC
) ||
3727 (cmd
== RAMROD_CMD_ID_ETH_RSS_UPDATE
))
3734 * bnx2x_sp_post - place a single command on an SP ring
3736 * @bp: driver handle
3737 * @command: command to place (e.g. SETUP, FILTER_RULES, etc.)
3738 * @cid: SW CID the command is related to
3739 * @data_hi: command private data address (high 32 bits)
3740 * @data_lo: command private data address (low 32 bits)
3741 * @cmd_type: command type (e.g. NONE, ETH)
3743 * SP data is handled as if it's always an address pair, thus data fields are
3744 * not swapped to little endian in upper functions. Instead this function swaps
3745 * data as if it's two u32 fields.
3747 int bnx2x_sp_post(struct bnx2x
*bp
, int command
, int cid
,
3748 u32 data_hi
, u32 data_lo
, int cmd_type
)
3750 struct eth_spe
*spe
;
3752 bool common
= bnx2x_is_contextless_ramrod(command
, cmd_type
);
3754 #ifdef BNX2X_STOP_ON_ERROR
3755 if (unlikely(bp
->panic
)) {
3756 BNX2X_ERR("Can't post SP when there is panic\n");
3761 spin_lock_bh(&bp
->spq_lock
);
3764 if (!atomic_read(&bp
->eq_spq_left
)) {
3765 BNX2X_ERR("BUG! EQ ring full!\n");
3766 spin_unlock_bh(&bp
->spq_lock
);
3770 } else if (!atomic_read(&bp
->cq_spq_left
)) {
3771 BNX2X_ERR("BUG! SPQ ring full!\n");
3772 spin_unlock_bh(&bp
->spq_lock
);
3777 spe
= bnx2x_sp_get_next(bp
);
3779 /* CID needs port number to be encoded int it */
3780 spe
->hdr
.conn_and_cmd_data
=
3781 cpu_to_le32((command
<< SPE_HDR_CMD_ID_SHIFT
) |
3784 /* In some cases, type may already contain the func-id
3785 * mainly in SRIOV related use cases, so we add it here only
3786 * if it's not already set.
3788 if (!(cmd_type
& SPE_HDR_FUNCTION_ID
)) {
3789 type
= (cmd_type
<< SPE_HDR_CONN_TYPE_SHIFT
) &
3791 type
|= ((BP_FUNC(bp
) << SPE_HDR_FUNCTION_ID_SHIFT
) &
3792 SPE_HDR_FUNCTION_ID
);
3797 spe
->hdr
.type
= cpu_to_le16(type
);
3799 spe
->data
.update_data_addr
.hi
= cpu_to_le32(data_hi
);
3800 spe
->data
.update_data_addr
.lo
= cpu_to_le32(data_lo
);
3803 * It's ok if the actual decrement is issued towards the memory
3804 * somewhere between the spin_lock and spin_unlock. Thus no
3805 * more explicit memory barrier is needed.
3808 atomic_dec(&bp
->eq_spq_left
);
3810 atomic_dec(&bp
->cq_spq_left
);
3813 "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) type(0x%x) left (CQ, EQ) (%x,%x)\n",
3814 bp
->spq_prod_idx
, (u32
)U64_HI(bp
->spq_mapping
),
3815 (u32
)(U64_LO(bp
->spq_mapping
) +
3816 (void *)bp
->spq_prod_bd
- (void *)bp
->spq
), command
, common
,
3817 HW_CID(bp
, cid
), data_hi
, data_lo
, type
,
3818 atomic_read(&bp
->cq_spq_left
), atomic_read(&bp
->eq_spq_left
));
3820 bnx2x_sp_prod_update(bp
);
3821 spin_unlock_bh(&bp
->spq_lock
);
3825 /* acquire split MCP access lock register */
3826 static int bnx2x_acquire_alr(struct bnx2x
*bp
)
3832 for (j
= 0; j
< 1000; j
++) {
3833 REG_WR(bp
, MCP_REG_MCPR_ACCESS_LOCK
, MCPR_ACCESS_LOCK_LOCK
);
3834 val
= REG_RD(bp
, MCP_REG_MCPR_ACCESS_LOCK
);
3835 if (val
& MCPR_ACCESS_LOCK_LOCK
)
3838 usleep_range(5000, 10000);
3840 if (!(val
& MCPR_ACCESS_LOCK_LOCK
)) {
3841 BNX2X_ERR("Cannot acquire MCP access lock register\n");
3848 /* release split MCP access lock register */
3849 static void bnx2x_release_alr(struct bnx2x
*bp
)
3851 REG_WR(bp
, MCP_REG_MCPR_ACCESS_LOCK
, 0);
3854 #define BNX2X_DEF_SB_ATT_IDX 0x0001
3855 #define BNX2X_DEF_SB_IDX 0x0002
3857 static u16
bnx2x_update_dsb_idx(struct bnx2x
*bp
)
3859 struct host_sp_status_block
*def_sb
= bp
->def_status_blk
;
3862 barrier(); /* status block is written to by the chip */
3863 if (bp
->def_att_idx
!= def_sb
->atten_status_block
.attn_bits_index
) {
3864 bp
->def_att_idx
= def_sb
->atten_status_block
.attn_bits_index
;
3865 rc
|= BNX2X_DEF_SB_ATT_IDX
;
3868 if (bp
->def_idx
!= def_sb
->sp_sb
.running_index
) {
3869 bp
->def_idx
= def_sb
->sp_sb
.running_index
;
3870 rc
|= BNX2X_DEF_SB_IDX
;
3873 /* Do not reorder: indices reading should complete before handling */
3879 * slow path service functions
3882 static void bnx2x_attn_int_asserted(struct bnx2x
*bp
, u32 asserted
)
3884 int port
= BP_PORT(bp
);
3885 u32 aeu_addr
= port
? MISC_REG_AEU_MASK_ATTN_FUNC_1
:
3886 MISC_REG_AEU_MASK_ATTN_FUNC_0
;
3887 u32 nig_int_mask_addr
= port
? NIG_REG_MASK_INTERRUPT_PORT1
:
3888 NIG_REG_MASK_INTERRUPT_PORT0
;
3893 if (bp
->attn_state
& asserted
)
3894 BNX2X_ERR("IGU ERROR\n");
3896 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_PORT0_ATT_MASK
+ port
);
3897 aeu_mask
= REG_RD(bp
, aeu_addr
);
3899 DP(NETIF_MSG_HW
, "aeu_mask %x newly asserted %x\n",
3900 aeu_mask
, asserted
);
3901 aeu_mask
&= ~(asserted
& 0x3ff);
3902 DP(NETIF_MSG_HW
, "new mask %x\n", aeu_mask
);
3904 REG_WR(bp
, aeu_addr
, aeu_mask
);
3905 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_PORT0_ATT_MASK
+ port
);
3907 DP(NETIF_MSG_HW
, "attn_state %x\n", bp
->attn_state
);
3908 bp
->attn_state
|= asserted
;
3909 DP(NETIF_MSG_HW
, "new state %x\n", bp
->attn_state
);
3911 if (asserted
& ATTN_HARD_WIRED_MASK
) {
3912 if (asserted
& ATTN_NIG_FOR_FUNC
) {
3914 bnx2x_acquire_phy_lock(bp
);
3916 /* save nig interrupt mask */
3917 nig_mask
= REG_RD(bp
, nig_int_mask_addr
);
3919 /* If nig_mask is not set, no need to call the update
3923 REG_WR(bp
, nig_int_mask_addr
, 0);
3925 bnx2x_link_attn(bp
);
3928 /* handle unicore attn? */
3930 if (asserted
& ATTN_SW_TIMER_4_FUNC
)
3931 DP(NETIF_MSG_HW
, "ATTN_SW_TIMER_4_FUNC!\n");
3933 if (asserted
& GPIO_2_FUNC
)
3934 DP(NETIF_MSG_HW
, "GPIO_2_FUNC!\n");
3936 if (asserted
& GPIO_3_FUNC
)
3937 DP(NETIF_MSG_HW
, "GPIO_3_FUNC!\n");
3939 if (asserted
& GPIO_4_FUNC
)
3940 DP(NETIF_MSG_HW
, "GPIO_4_FUNC!\n");
3943 if (asserted
& ATTN_GENERAL_ATTN_1
) {
3944 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_1!\n");
3945 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_1
, 0x0);
3947 if (asserted
& ATTN_GENERAL_ATTN_2
) {
3948 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_2!\n");
3949 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_2
, 0x0);
3951 if (asserted
& ATTN_GENERAL_ATTN_3
) {
3952 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_3!\n");
3953 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_3
, 0x0);
3956 if (asserted
& ATTN_GENERAL_ATTN_4
) {
3957 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_4!\n");
3958 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_4
, 0x0);
3960 if (asserted
& ATTN_GENERAL_ATTN_5
) {
3961 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_5!\n");
3962 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_5
, 0x0);
3964 if (asserted
& ATTN_GENERAL_ATTN_6
) {
3965 DP(NETIF_MSG_HW
, "ATTN_GENERAL_ATTN_6!\n");
3966 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_6
, 0x0);
3970 } /* if hardwired */
3972 if (bp
->common
.int_block
== INT_BLOCK_HC
)
3973 reg_addr
= (HC_REG_COMMAND_REG
+ port
*32 +
3974 COMMAND_REG_ATTN_BITS_SET
);
3976 reg_addr
= (BAR_IGU_INTMEM
+ IGU_CMD_ATTN_BIT_SET_UPPER
*8);
3978 DP(NETIF_MSG_HW
, "about to mask 0x%08x at %s addr 0x%x\n", asserted
,
3979 (bp
->common
.int_block
== INT_BLOCK_HC
) ? "HC" : "IGU", reg_addr
);
3980 REG_WR(bp
, reg_addr
, asserted
);
3982 /* now set back the mask */
3983 if (asserted
& ATTN_NIG_FOR_FUNC
) {
3984 /* Verify that IGU ack through BAR was written before restoring
3985 * NIG mask. This loop should exit after 2-3 iterations max.
3987 if (bp
->common
.int_block
!= INT_BLOCK_HC
) {
3988 u32 cnt
= 0, igu_acked
;
3990 igu_acked
= REG_RD(bp
,
3991 IGU_REG_ATTENTION_ACK_BITS
);
3992 } while (((igu_acked
& ATTN_NIG_FOR_FUNC
) == 0) &&
3993 (++cnt
< MAX_IGU_ATTN_ACK_TO
));
3996 "Failed to verify IGU ack on time\n");
3999 REG_WR(bp
, nig_int_mask_addr
, nig_mask
);
4000 bnx2x_release_phy_lock(bp
);
4004 static void bnx2x_fan_failure(struct bnx2x
*bp
)
4006 int port
= BP_PORT(bp
);
4008 /* mark the failure */
4011 dev_info
.port_hw_config
[port
].external_phy_config
);
4013 ext_phy_config
&= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK
;
4014 ext_phy_config
|= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE
;
4015 SHMEM_WR(bp
, dev_info
.port_hw_config
[port
].external_phy_config
,
4018 /* log the failure */
4019 netdev_err(bp
->dev
, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n"
4020 "Please contact OEM Support for assistance\n");
4022 /* Schedule device reset (unload)
4023 * This is due to some boards consuming sufficient power when driver is
4024 * up to overheat if fan fails.
4026 bnx2x_schedule_sp_rtnl(bp
, BNX2X_SP_RTNL_FAN_FAILURE
, 0);
4029 static void bnx2x_attn_int_deasserted0(struct bnx2x
*bp
, u32 attn
)
4031 int port
= BP_PORT(bp
);
4035 reg_offset
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0
:
4036 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0
);
4038 if (attn
& AEU_INPUTS_ATTN_BITS_SPIO5
) {
4040 val
= REG_RD(bp
, reg_offset
);
4041 val
&= ~AEU_INPUTS_ATTN_BITS_SPIO5
;
4042 REG_WR(bp
, reg_offset
, val
);
4044 BNX2X_ERR("SPIO5 hw attention\n");
4046 /* Fan failure attention */
4047 bnx2x_hw_reset_phy(&bp
->link_params
);
4048 bnx2x_fan_failure(bp
);
4051 if ((attn
& bp
->link_vars
.aeu_int_mask
) && bp
->port
.pmf
) {
4052 bnx2x_acquire_phy_lock(bp
);
4053 bnx2x_handle_module_detect_int(&bp
->link_params
);
4054 bnx2x_release_phy_lock(bp
);
4057 if (attn
& HW_INTERRUT_ASSERT_SET_0
) {
4059 val
= REG_RD(bp
, reg_offset
);
4060 val
&= ~(attn
& HW_INTERRUT_ASSERT_SET_0
);
4061 REG_WR(bp
, reg_offset
, val
);
4063 BNX2X_ERR("FATAL HW block attention set0 0x%x\n",
4064 (u32
)(attn
& HW_INTERRUT_ASSERT_SET_0
));
4069 static void bnx2x_attn_int_deasserted1(struct bnx2x
*bp
, u32 attn
)
4073 if (attn
& AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT
) {
4075 val
= REG_RD(bp
, DORQ_REG_DORQ_INT_STS_CLR
);
4076 BNX2X_ERR("DB hw attention 0x%x\n", val
);
4077 /* DORQ discard attention */
4079 BNX2X_ERR("FATAL error from DORQ\n");
4082 if (attn
& HW_INTERRUT_ASSERT_SET_1
) {
4084 int port
= BP_PORT(bp
);
4087 reg_offset
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1
:
4088 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1
);
4090 val
= REG_RD(bp
, reg_offset
);
4091 val
&= ~(attn
& HW_INTERRUT_ASSERT_SET_1
);
4092 REG_WR(bp
, reg_offset
, val
);
4094 BNX2X_ERR("FATAL HW block attention set1 0x%x\n",
4095 (u32
)(attn
& HW_INTERRUT_ASSERT_SET_1
));
4100 static void bnx2x_attn_int_deasserted2(struct bnx2x
*bp
, u32 attn
)
4104 if (attn
& AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT
) {
4106 val
= REG_RD(bp
, CFC_REG_CFC_INT_STS_CLR
);
4107 BNX2X_ERR("CFC hw attention 0x%x\n", val
);
4108 /* CFC error attention */
4110 BNX2X_ERR("FATAL error from CFC\n");
4113 if (attn
& AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT
) {
4114 val
= REG_RD(bp
, PXP_REG_PXP_INT_STS_CLR_0
);
4115 BNX2X_ERR("PXP hw attention-0 0x%x\n", val
);
4116 /* RQ_USDMDP_FIFO_OVERFLOW */
4118 BNX2X_ERR("FATAL error from PXP\n");
4120 if (!CHIP_IS_E1x(bp
)) {
4121 val
= REG_RD(bp
, PXP_REG_PXP_INT_STS_CLR_1
);
4122 BNX2X_ERR("PXP hw attention-1 0x%x\n", val
);
4126 if (attn
& HW_INTERRUT_ASSERT_SET_2
) {
4128 int port
= BP_PORT(bp
);
4131 reg_offset
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2
:
4132 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2
);
4134 val
= REG_RD(bp
, reg_offset
);
4135 val
&= ~(attn
& HW_INTERRUT_ASSERT_SET_2
);
4136 REG_WR(bp
, reg_offset
, val
);
4138 BNX2X_ERR("FATAL HW block attention set2 0x%x\n",
4139 (u32
)(attn
& HW_INTERRUT_ASSERT_SET_2
));
4144 static void bnx2x_attn_int_deasserted3(struct bnx2x
*bp
, u32 attn
)
4148 if (attn
& EVEREST_GEN_ATTN_IN_USE_MASK
) {
4150 if (attn
& BNX2X_PMF_LINK_ASSERT
) {
4151 int func
= BP_FUNC(bp
);
4153 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_12
+ func
*4, 0);
4154 bnx2x_read_mf_cfg(bp
);
4155 bp
->mf_config
[BP_VN(bp
)] = MF_CFG_RD(bp
,
4156 func_mf_config
[BP_ABS_FUNC(bp
)].config
);
4158 func_mb
[BP_FW_MB_IDX(bp
)].drv_status
);
4159 if (val
& DRV_STATUS_DCC_EVENT_MASK
)
4161 (val
& DRV_STATUS_DCC_EVENT_MASK
));
4163 if (val
& DRV_STATUS_SET_MF_BW
)
4164 bnx2x_set_mf_bw(bp
);
4166 if (val
& DRV_STATUS_DRV_INFO_REQ
)
4167 bnx2x_handle_drv_info_req(bp
);
4169 if (val
& DRV_STATUS_VF_DISABLED
)
4170 bnx2x_schedule_iov_task(bp
,
4171 BNX2X_IOV_HANDLE_FLR
);
4173 if ((bp
->port
.pmf
== 0) && (val
& DRV_STATUS_PMF
))
4174 bnx2x_pmf_update(bp
);
4177 (val
& DRV_STATUS_DCBX_NEGOTIATION_RESULTS
) &&
4178 bp
->dcbx_enabled
> 0)
4179 /* start dcbx state machine */
4180 bnx2x_dcbx_set_params(bp
,
4181 BNX2X_DCBX_STATE_NEG_RECEIVED
);
4182 if (val
& DRV_STATUS_AFEX_EVENT_MASK
)
4183 bnx2x_handle_afex_cmd(bp
,
4184 val
& DRV_STATUS_AFEX_EVENT_MASK
);
4185 if (val
& DRV_STATUS_EEE_NEGOTIATION_RESULTS
)
4186 bnx2x_handle_eee_event(bp
);
4187 if (bp
->link_vars
.periodic_flags
&
4188 PERIODIC_FLAGS_LINK_EVENT
) {
4189 /* sync with link */
4190 bnx2x_acquire_phy_lock(bp
);
4191 bp
->link_vars
.periodic_flags
&=
4192 ~PERIODIC_FLAGS_LINK_EVENT
;
4193 bnx2x_release_phy_lock(bp
);
4195 bnx2x_link_sync_notify(bp
);
4196 bnx2x_link_report(bp
);
4198 /* Always call it here: bnx2x_link_report() will
4199 * prevent the link indication duplication.
4201 bnx2x__link_status_update(bp
);
4202 } else if (attn
& BNX2X_MC_ASSERT_BITS
) {
4204 BNX2X_ERR("MC assert!\n");
4205 bnx2x_mc_assert(bp
);
4206 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_10
, 0);
4207 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_9
, 0);
4208 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_8
, 0);
4209 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_7
, 0);
4212 } else if (attn
& BNX2X_MCP_ASSERT
) {
4214 BNX2X_ERR("MCP assert!\n");
4215 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_11
, 0);
4219 BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn
);
4222 if (attn
& EVEREST_LATCHED_ATTN_IN_USE_MASK
) {
4223 BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn
);
4224 if (attn
& BNX2X_GRC_TIMEOUT
) {
4225 val
= CHIP_IS_E1(bp
) ? 0 :
4226 REG_RD(bp
, MISC_REG_GRC_TIMEOUT_ATTN
);
4227 BNX2X_ERR("GRC time-out 0x%08x\n", val
);
4229 if (attn
& BNX2X_GRC_RSV
) {
4230 val
= CHIP_IS_E1(bp
) ? 0 :
4231 REG_RD(bp
, MISC_REG_GRC_RSV_ATTN
);
4232 BNX2X_ERR("GRC reserved 0x%08x\n", val
);
4234 REG_WR(bp
, MISC_REG_AEU_CLR_LATCH_SIGNAL
, 0x7ff);
4240 * 0-7 - Engine0 load counter.
4241 * 8-15 - Engine1 load counter.
4242 * 16 - Engine0 RESET_IN_PROGRESS bit.
4243 * 17 - Engine1 RESET_IN_PROGRESS bit.
4244 * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active function
4246 * 19 - Engine1 ONE_IS_LOADED.
4247 * 20 - Chip reset flow bit. When set none-leader must wait for both engines
4248 * leader to complete (check for both RESET_IN_PROGRESS bits and not for
4249 * just the one belonging to its engine).
4252 #define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1
4254 #define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff
4255 #define BNX2X_PATH0_LOAD_CNT_SHIFT 0
4256 #define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00
4257 #define BNX2X_PATH1_LOAD_CNT_SHIFT 8
4258 #define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
4259 #define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
4260 #define BNX2X_GLOBAL_RESET_BIT 0x00040000
4263 * Set the GLOBAL_RESET bit.
4265 * Should be run under rtnl lock
4267 void bnx2x_set_reset_global(struct bnx2x
*bp
)
4270 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4271 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4272 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
| BNX2X_GLOBAL_RESET_BIT
);
4273 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4277 * Clear the GLOBAL_RESET bit.
4279 * Should be run under rtnl lock
4281 static void bnx2x_clear_reset_global(struct bnx2x
*bp
)
4284 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4285 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4286 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
& (~BNX2X_GLOBAL_RESET_BIT
));
4287 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4291 * Checks the GLOBAL_RESET bit.
4293 * should be run under rtnl lock
4295 static bool bnx2x_reset_is_global(struct bnx2x
*bp
)
4297 u32 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4299 DP(NETIF_MSG_HW
, "GEN_REG_VAL=0x%08x\n", val
);
4300 return (val
& BNX2X_GLOBAL_RESET_BIT
) ? true : false;
4304 * Clear RESET_IN_PROGRESS bit for the current engine.
4306 * Should be run under rtnl lock
4308 static void bnx2x_set_reset_done(struct bnx2x
*bp
)
4311 u32 bit
= BP_PATH(bp
) ?
4312 BNX2X_PATH1_RST_IN_PROG_BIT
: BNX2X_PATH0_RST_IN_PROG_BIT
;
4313 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4314 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4318 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
);
4320 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4324 * Set RESET_IN_PROGRESS for the current engine.
4326 * should be run under rtnl lock
4328 void bnx2x_set_reset_in_progress(struct bnx2x
*bp
)
4331 u32 bit
= BP_PATH(bp
) ?
4332 BNX2X_PATH1_RST_IN_PROG_BIT
: BNX2X_PATH0_RST_IN_PROG_BIT
;
4333 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4334 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4338 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
);
4339 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4343 * Checks the RESET_IN_PROGRESS bit for the given engine.
4344 * should be run under rtnl lock
4346 bool bnx2x_reset_is_done(struct bnx2x
*bp
, int engine
)
4348 u32 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4350 BNX2X_PATH1_RST_IN_PROG_BIT
: BNX2X_PATH0_RST_IN_PROG_BIT
;
4352 /* return false if bit is set */
4353 return (val
& bit
) ? false : true;
4357 * set pf load for the current pf.
4359 * should be run under rtnl lock
4361 void bnx2x_set_pf_load(struct bnx2x
*bp
)
4364 u32 mask
= BP_PATH(bp
) ? BNX2X_PATH1_LOAD_CNT_MASK
:
4365 BNX2X_PATH0_LOAD_CNT_MASK
;
4366 u32 shift
= BP_PATH(bp
) ? BNX2X_PATH1_LOAD_CNT_SHIFT
:
4367 BNX2X_PATH0_LOAD_CNT_SHIFT
;
4369 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4370 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4372 DP(NETIF_MSG_IFUP
, "Old GEN_REG_VAL=0x%08x\n", val
);
4374 /* get the current counter value */
4375 val1
= (val
& mask
) >> shift
;
4377 /* set bit of that PF */
4378 val1
|= (1 << bp
->pf_num
);
4380 /* clear the old value */
4383 /* set the new one */
4384 val
|= ((val1
<< shift
) & mask
);
4386 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
);
4387 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4391 * bnx2x_clear_pf_load - clear pf load mark
4393 * @bp: driver handle
4395 * Should be run under rtnl lock.
4396 * Decrements the load counter for the current engine. Returns
4397 * whether other functions are still loaded
4399 bool bnx2x_clear_pf_load(struct bnx2x
*bp
)
4402 u32 mask
= BP_PATH(bp
) ? BNX2X_PATH1_LOAD_CNT_MASK
:
4403 BNX2X_PATH0_LOAD_CNT_MASK
;
4404 u32 shift
= BP_PATH(bp
) ? BNX2X_PATH1_LOAD_CNT_SHIFT
:
4405 BNX2X_PATH0_LOAD_CNT_SHIFT
;
4407 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4408 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4409 DP(NETIF_MSG_IFDOWN
, "Old GEN_REG_VAL=0x%08x\n", val
);
4411 /* get the current counter value */
4412 val1
= (val
& mask
) >> shift
;
4414 /* clear bit of that PF */
4415 val1
&= ~(1 << bp
->pf_num
);
4417 /* clear the old value */
4420 /* set the new one */
4421 val
|= ((val1
<< shift
) & mask
);
4423 REG_WR(bp
, BNX2X_RECOVERY_GLOB_REG
, val
);
4424 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RECOVERY_REG
);
4429 * Read the load status for the current engine.
4431 * should be run under rtnl lock
4433 static bool bnx2x_get_load_status(struct bnx2x
*bp
, int engine
)
4435 u32 mask
= (engine
? BNX2X_PATH1_LOAD_CNT_MASK
:
4436 BNX2X_PATH0_LOAD_CNT_MASK
);
4437 u32 shift
= (engine
? BNX2X_PATH1_LOAD_CNT_SHIFT
:
4438 BNX2X_PATH0_LOAD_CNT_SHIFT
);
4439 u32 val
= REG_RD(bp
, BNX2X_RECOVERY_GLOB_REG
);
4441 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
, "GLOB_REG=0x%08x\n", val
);
4443 val
= (val
& mask
) >> shift
;
4445 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
, "load mask for engine %d = 0x%x\n",
4451 static void _print_parity(struct bnx2x
*bp
, u32 reg
)
4453 pr_cont(" [0x%08x] ", REG_RD(bp
, reg
));
4456 static void _print_next_block(int idx
, const char *blk
)
4458 pr_cont("%s%s", idx
? ", " : "", blk
);
4461 static bool bnx2x_check_blocks_with_parity0(struct bnx2x
*bp
, u32 sig
,
4462 int *par_num
, bool print
)
4470 for (i
= 0; sig
; i
++) {
4471 cur_bit
= (0x1UL
<< i
);
4472 if (sig
& cur_bit
) {
4473 res
|= true; /* Each bit is real error! */
4477 case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR
:
4478 _print_next_block((*par_num
)++, "BRB");
4480 BRB1_REG_BRB1_PRTY_STS
);
4482 case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR
:
4483 _print_next_block((*par_num
)++,
4485 _print_parity(bp
, PRS_REG_PRS_PRTY_STS
);
4487 case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR
:
4488 _print_next_block((*par_num
)++, "TSDM");
4490 TSDM_REG_TSDM_PRTY_STS
);
4492 case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR
:
4493 _print_next_block((*par_num
)++,
4495 _print_parity(bp
, SRC_REG_SRC_PRTY_STS
);
4497 case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR
:
4498 _print_next_block((*par_num
)++, "TCM");
4499 _print_parity(bp
, TCM_REG_TCM_PRTY_STS
);
4501 case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR
:
4502 _print_next_block((*par_num
)++,
4505 TSEM_REG_TSEM_PRTY_STS_0
);
4507 TSEM_REG_TSEM_PRTY_STS_1
);
4509 case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR
:
4510 _print_next_block((*par_num
)++, "XPB");
4511 _print_parity(bp
, GRCBASE_XPB
+
4512 PB_REG_PB_PRTY_STS
);
4525 static bool bnx2x_check_blocks_with_parity1(struct bnx2x
*bp
, u32 sig
,
4526 int *par_num
, bool *global
,
4535 for (i
= 0; sig
; i
++) {
4536 cur_bit
= (0x1UL
<< i
);
4537 if (sig
& cur_bit
) {
4538 res
|= true; /* Each bit is real error! */
4540 case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR
:
4542 _print_next_block((*par_num
)++, "PBF");
4543 _print_parity(bp
, PBF_REG_PBF_PRTY_STS
);
4546 case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR
:
4548 _print_next_block((*par_num
)++, "QM");
4549 _print_parity(bp
, QM_REG_QM_PRTY_STS
);
4552 case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR
:
4554 _print_next_block((*par_num
)++, "TM");
4555 _print_parity(bp
, TM_REG_TM_PRTY_STS
);
4558 case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR
:
4560 _print_next_block((*par_num
)++, "XSDM");
4562 XSDM_REG_XSDM_PRTY_STS
);
4565 case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR
:
4567 _print_next_block((*par_num
)++, "XCM");
4568 _print_parity(bp
, XCM_REG_XCM_PRTY_STS
);
4571 case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR
:
4573 _print_next_block((*par_num
)++,
4576 XSEM_REG_XSEM_PRTY_STS_0
);
4578 XSEM_REG_XSEM_PRTY_STS_1
);
4581 case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR
:
4583 _print_next_block((*par_num
)++,
4586 DORQ_REG_DORQ_PRTY_STS
);
4589 case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR
:
4591 _print_next_block((*par_num
)++, "NIG");
4592 if (CHIP_IS_E1x(bp
)) {
4594 NIG_REG_NIG_PRTY_STS
);
4597 NIG_REG_NIG_PRTY_STS_0
);
4599 NIG_REG_NIG_PRTY_STS_1
);
4603 case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR
:
4605 _print_next_block((*par_num
)++,
4609 case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR
:
4611 _print_next_block((*par_num
)++,
4613 _print_parity(bp
, DBG_REG_DBG_PRTY_STS
);
4616 case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR
:
4618 _print_next_block((*par_num
)++, "USDM");
4620 USDM_REG_USDM_PRTY_STS
);
4623 case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR
:
4625 _print_next_block((*par_num
)++, "UCM");
4626 _print_parity(bp
, UCM_REG_UCM_PRTY_STS
);
4629 case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR
:
4631 _print_next_block((*par_num
)++,
4634 USEM_REG_USEM_PRTY_STS_0
);
4636 USEM_REG_USEM_PRTY_STS_1
);
4639 case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR
:
4641 _print_next_block((*par_num
)++, "UPB");
4642 _print_parity(bp
, GRCBASE_UPB
+
4643 PB_REG_PB_PRTY_STS
);
4646 case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR
:
4648 _print_next_block((*par_num
)++, "CSDM");
4650 CSDM_REG_CSDM_PRTY_STS
);
4653 case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR
:
4655 _print_next_block((*par_num
)++, "CCM");
4656 _print_parity(bp
, CCM_REG_CCM_PRTY_STS
);
4669 static bool bnx2x_check_blocks_with_parity2(struct bnx2x
*bp
, u32 sig
,
4670 int *par_num
, bool print
)
4678 for (i
= 0; sig
; i
++) {
4679 cur_bit
= (0x1UL
<< i
);
4680 if (sig
& cur_bit
) {
4681 res
|= true; /* Each bit is real error! */
4684 case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR
:
4685 _print_next_block((*par_num
)++,
4688 CSEM_REG_CSEM_PRTY_STS_0
);
4690 CSEM_REG_CSEM_PRTY_STS_1
);
4692 case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR
:
4693 _print_next_block((*par_num
)++, "PXP");
4694 _print_parity(bp
, PXP_REG_PXP_PRTY_STS
);
4696 PXP2_REG_PXP2_PRTY_STS_0
);
4698 PXP2_REG_PXP2_PRTY_STS_1
);
4700 case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR
:
4701 _print_next_block((*par_num
)++,
4702 "PXPPCICLOCKCLIENT");
4704 case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR
:
4705 _print_next_block((*par_num
)++, "CFC");
4707 CFC_REG_CFC_PRTY_STS
);
4709 case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR
:
4710 _print_next_block((*par_num
)++, "CDU");
4711 _print_parity(bp
, CDU_REG_CDU_PRTY_STS
);
4713 case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR
:
4714 _print_next_block((*par_num
)++, "DMAE");
4716 DMAE_REG_DMAE_PRTY_STS
);
4718 case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR
:
4719 _print_next_block((*par_num
)++, "IGU");
4720 if (CHIP_IS_E1x(bp
))
4722 HC_REG_HC_PRTY_STS
);
4725 IGU_REG_IGU_PRTY_STS
);
4727 case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR
:
4728 _print_next_block((*par_num
)++, "MISC");
4730 MISC_REG_MISC_PRTY_STS
);
4743 static bool bnx2x_check_blocks_with_parity3(struct bnx2x
*bp
, u32 sig
,
4744 int *par_num
, bool *global
,
4751 for (i
= 0; sig
; i
++) {
4752 cur_bit
= (0x1UL
<< i
);
4753 if (sig
& cur_bit
) {
4755 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY
:
4757 _print_next_block((*par_num
)++,
4762 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY
:
4764 _print_next_block((*par_num
)++,
4769 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY
:
4771 _print_next_block((*par_num
)++,
4776 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY
:
4778 _print_next_block((*par_num
)++,
4780 /* clear latched SCPAD PATIRY from MCP */
4781 REG_WR(bp
, MISC_REG_AEU_CLR_LATCH_SIGNAL
,
4794 static bool bnx2x_check_blocks_with_parity4(struct bnx2x
*bp
, u32 sig
,
4795 int *par_num
, bool print
)
4803 for (i
= 0; sig
; i
++) {
4804 cur_bit
= (0x1UL
<< i
);
4805 if (sig
& cur_bit
) {
4806 res
|= true; /* Each bit is real error! */
4809 case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
:
4810 _print_next_block((*par_num
)++,
4813 PGLUE_B_REG_PGLUE_B_PRTY_STS
);
4815 case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR
:
4816 _print_next_block((*par_num
)++, "ATC");
4818 ATC_REG_ATC_PRTY_STS
);
4830 static bool bnx2x_parity_attn(struct bnx2x
*bp
, bool *global
, bool print
,
4835 if ((sig
[0] & HW_PRTY_ASSERT_SET_0
) ||
4836 (sig
[1] & HW_PRTY_ASSERT_SET_1
) ||
4837 (sig
[2] & HW_PRTY_ASSERT_SET_2
) ||
4838 (sig
[3] & HW_PRTY_ASSERT_SET_3
) ||
4839 (sig
[4] & HW_PRTY_ASSERT_SET_4
)) {
4841 DP(NETIF_MSG_HW
, "Was parity error: HW block parity attention:\n"
4842 "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n",
4843 sig
[0] & HW_PRTY_ASSERT_SET_0
,
4844 sig
[1] & HW_PRTY_ASSERT_SET_1
,
4845 sig
[2] & HW_PRTY_ASSERT_SET_2
,
4846 sig
[3] & HW_PRTY_ASSERT_SET_3
,
4847 sig
[4] & HW_PRTY_ASSERT_SET_4
);
4850 "Parity errors detected in blocks: ");
4851 res
|= bnx2x_check_blocks_with_parity0(bp
,
4852 sig
[0] & HW_PRTY_ASSERT_SET_0
, &par_num
, print
);
4853 res
|= bnx2x_check_blocks_with_parity1(bp
,
4854 sig
[1] & HW_PRTY_ASSERT_SET_1
, &par_num
, global
, print
);
4855 res
|= bnx2x_check_blocks_with_parity2(bp
,
4856 sig
[2] & HW_PRTY_ASSERT_SET_2
, &par_num
, print
);
4857 res
|= bnx2x_check_blocks_with_parity3(bp
,
4858 sig
[3] & HW_PRTY_ASSERT_SET_3
, &par_num
, global
, print
);
4859 res
|= bnx2x_check_blocks_with_parity4(bp
,
4860 sig
[4] & HW_PRTY_ASSERT_SET_4
, &par_num
, print
);
4870 * bnx2x_chk_parity_attn - checks for parity attentions.
4872 * @bp: driver handle
4873 * @global: true if there was a global attention
4874 * @print: show parity attention in syslog
4876 bool bnx2x_chk_parity_attn(struct bnx2x
*bp
, bool *global
, bool print
)
4878 struct attn_route attn
= { {0} };
4879 int port
= BP_PORT(bp
);
4881 attn
.sig
[0] = REG_RD(bp
,
4882 MISC_REG_AEU_AFTER_INVERT_1_FUNC_0
+
4884 attn
.sig
[1] = REG_RD(bp
,
4885 MISC_REG_AEU_AFTER_INVERT_2_FUNC_0
+
4887 attn
.sig
[2] = REG_RD(bp
,
4888 MISC_REG_AEU_AFTER_INVERT_3_FUNC_0
+
4890 attn
.sig
[3] = REG_RD(bp
,
4891 MISC_REG_AEU_AFTER_INVERT_4_FUNC_0
+
4893 /* Since MCP attentions can't be disabled inside the block, we need to
4894 * read AEU registers to see whether they're currently disabled
4896 attn
.sig
[3] &= ((REG_RD(bp
,
4897 !port
? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0
4898 : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0
) &
4899 MISC_AEU_ENABLE_MCP_PRTY_BITS
) |
4900 ~MISC_AEU_ENABLE_MCP_PRTY_BITS
);
4902 if (!CHIP_IS_E1x(bp
))
4903 attn
.sig
[4] = REG_RD(bp
,
4904 MISC_REG_AEU_AFTER_INVERT_5_FUNC_0
+
4907 return bnx2x_parity_attn(bp
, global
, print
, attn
.sig
);
4910 static void bnx2x_attn_int_deasserted4(struct bnx2x
*bp
, u32 attn
)
4913 if (attn
& AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT
) {
4915 val
= REG_RD(bp
, PGLUE_B_REG_PGLUE_B_INT_STS_CLR
);
4916 BNX2X_ERR("PGLUE hw attention 0x%x\n", val
);
4917 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR
)
4918 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR\n");
4919 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR
)
4920 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR\n");
4921 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN
)
4922 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN\n");
4923 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN
)
4924 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN\n");
4926 PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN
)
4927 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN\n");
4929 PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN
)
4930 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN\n");
4931 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN
)
4932 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN\n");
4933 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN
)
4934 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN\n");
4935 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW
)
4936 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW\n");
4938 if (attn
& AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT
) {
4939 val
= REG_RD(bp
, ATC_REG_ATC_INT_STS_CLR
);
4940 BNX2X_ERR("ATC hw attention 0x%x\n", val
);
4941 if (val
& ATC_ATC_INT_STS_REG_ADDRESS_ERROR
)
4942 BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n");
4943 if (val
& ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND
)
4944 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND\n");
4945 if (val
& ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS
)
4946 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS\n");
4947 if (val
& ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT
)
4948 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT\n");
4949 if (val
& ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR
)
4950 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n");
4951 if (val
& ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU
)
4952 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU\n");
4955 if (attn
& (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
|
4956 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR
)) {
4957 BNX2X_ERR("FATAL parity attention set4 0x%x\n",
4958 (u32
)(attn
& (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
|
4959 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR
)));
4963 static void bnx2x_attn_int_deasserted(struct bnx2x
*bp
, u32 deasserted
)
4965 struct attn_route attn
, *group_mask
;
4966 int port
= BP_PORT(bp
);
4971 bool global
= false;
4973 /* need to take HW lock because MCP or other port might also
4974 try to handle this event */
4975 bnx2x_acquire_alr(bp
);
4977 if (bnx2x_chk_parity_attn(bp
, &global
, true)) {
4978 #ifndef BNX2X_STOP_ON_ERROR
4979 bp
->recovery_state
= BNX2X_RECOVERY_INIT
;
4980 schedule_delayed_work(&bp
->sp_rtnl_task
, 0);
4981 /* Disable HW interrupts */
4982 bnx2x_int_disable(bp
);
4983 /* In case of parity errors don't handle attentions so that
4984 * other function would "see" parity errors.
4989 bnx2x_release_alr(bp
);
4993 attn
.sig
[0] = REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0
+ port
*4);
4994 attn
.sig
[1] = REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0
+ port
*4);
4995 attn
.sig
[2] = REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0
+ port
*4);
4996 attn
.sig
[3] = REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0
+ port
*4);
4997 if (!CHIP_IS_E1x(bp
))
4999 REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0
+ port
*4);
5003 DP(NETIF_MSG_HW
, "attn: %08x %08x %08x %08x %08x\n",
5004 attn
.sig
[0], attn
.sig
[1], attn
.sig
[2], attn
.sig
[3], attn
.sig
[4]);
5006 for (index
= 0; index
< MAX_DYNAMIC_ATTN_GRPS
; index
++) {
5007 if (deasserted
& (1 << index
)) {
5008 group_mask
= &bp
->attn_group
[index
];
5010 DP(NETIF_MSG_HW
, "group[%d]: %08x %08x %08x %08x %08x\n",
5012 group_mask
->sig
[0], group_mask
->sig
[1],
5013 group_mask
->sig
[2], group_mask
->sig
[3],
5014 group_mask
->sig
[4]);
5016 bnx2x_attn_int_deasserted4(bp
,
5017 attn
.sig
[4] & group_mask
->sig
[4]);
5018 bnx2x_attn_int_deasserted3(bp
,
5019 attn
.sig
[3] & group_mask
->sig
[3]);
5020 bnx2x_attn_int_deasserted1(bp
,
5021 attn
.sig
[1] & group_mask
->sig
[1]);
5022 bnx2x_attn_int_deasserted2(bp
,
5023 attn
.sig
[2] & group_mask
->sig
[2]);
5024 bnx2x_attn_int_deasserted0(bp
,
5025 attn
.sig
[0] & group_mask
->sig
[0]);
5029 bnx2x_release_alr(bp
);
5031 if (bp
->common
.int_block
== INT_BLOCK_HC
)
5032 reg_addr
= (HC_REG_COMMAND_REG
+ port
*32 +
5033 COMMAND_REG_ATTN_BITS_CLR
);
5035 reg_addr
= (BAR_IGU_INTMEM
+ IGU_CMD_ATTN_BIT_CLR_UPPER
*8);
5038 DP(NETIF_MSG_HW
, "about to mask 0x%08x at %s addr 0x%x\n", val
,
5039 (bp
->common
.int_block
== INT_BLOCK_HC
) ? "HC" : "IGU", reg_addr
);
5040 REG_WR(bp
, reg_addr
, val
);
5042 if (~bp
->attn_state
& deasserted
)
5043 BNX2X_ERR("IGU ERROR\n");
5045 reg_addr
= port
? MISC_REG_AEU_MASK_ATTN_FUNC_1
:
5046 MISC_REG_AEU_MASK_ATTN_FUNC_0
;
5048 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_PORT0_ATT_MASK
+ port
);
5049 aeu_mask
= REG_RD(bp
, reg_addr
);
5051 DP(NETIF_MSG_HW
, "aeu_mask %x newly deasserted %x\n",
5052 aeu_mask
, deasserted
);
5053 aeu_mask
|= (deasserted
& 0x3ff);
5054 DP(NETIF_MSG_HW
, "new mask %x\n", aeu_mask
);
5056 REG_WR(bp
, reg_addr
, aeu_mask
);
5057 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_PORT0_ATT_MASK
+ port
);
5059 DP(NETIF_MSG_HW
, "attn_state %x\n", bp
->attn_state
);
5060 bp
->attn_state
&= ~deasserted
;
5061 DP(NETIF_MSG_HW
, "new state %x\n", bp
->attn_state
);
5064 static void bnx2x_attn_int(struct bnx2x
*bp
)
5066 /* read local copy of bits */
5067 u32 attn_bits
= le32_to_cpu(bp
->def_status_blk
->atten_status_block
.
5069 u32 attn_ack
= le32_to_cpu(bp
->def_status_blk
->atten_status_block
.
5071 u32 attn_state
= bp
->attn_state
;
5073 /* look for changed bits */
5074 u32 asserted
= attn_bits
& ~attn_ack
& ~attn_state
;
5075 u32 deasserted
= ~attn_bits
& attn_ack
& attn_state
;
5078 "attn_bits %x attn_ack %x asserted %x deasserted %x\n",
5079 attn_bits
, attn_ack
, asserted
, deasserted
);
5081 if (~(attn_bits
^ attn_ack
) & (attn_bits
^ attn_state
))
5082 BNX2X_ERR("BAD attention state\n");
5084 /* handle bits that were raised */
5086 bnx2x_attn_int_asserted(bp
, asserted
);
5089 bnx2x_attn_int_deasserted(bp
, deasserted
);
5092 void bnx2x_igu_ack_sb(struct bnx2x
*bp
, u8 igu_sb_id
, u8 segment
,
5093 u16 index
, u8 op
, u8 update
)
5095 u32 igu_addr
= bp
->igu_base_addr
;
5096 igu_addr
+= (IGU_CMD_INT_ACK_BASE
+ igu_sb_id
)*8;
5097 bnx2x_igu_ack_sb_gen(bp
, igu_sb_id
, segment
, index
, op
, update
,
5101 static void bnx2x_update_eq_prod(struct bnx2x
*bp
, u16 prod
)
5103 /* No memory barriers */
5104 storm_memset_eq_prod(bp
, prod
, BP_FUNC(bp
));
5105 mmiowb(); /* keep prod updates ordered */
5108 static int bnx2x_cnic_handle_cfc_del(struct bnx2x
*bp
, u32 cid
,
5109 union event_ring_elem
*elem
)
5111 u8 err
= elem
->message
.error
;
5113 if (!bp
->cnic_eth_dev
.starting_cid
||
5114 (cid
< bp
->cnic_eth_dev
.starting_cid
&&
5115 cid
!= bp
->cnic_eth_dev
.iscsi_l2_cid
))
5118 DP(BNX2X_MSG_SP
, "got delete ramrod for CNIC CID %d\n", cid
);
5120 if (unlikely(err
)) {
5122 BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n",
5124 bnx2x_panic_dump(bp
, false);
5126 bnx2x_cnic_cfc_comp(bp
, cid
, err
);
5130 static void bnx2x_handle_mcast_eqe(struct bnx2x
*bp
)
5132 struct bnx2x_mcast_ramrod_params rparam
;
5135 memset(&rparam
, 0, sizeof(rparam
));
5137 rparam
.mcast_obj
= &bp
->mcast_obj
;
5139 netif_addr_lock_bh(bp
->dev
);
5141 /* Clear pending state for the last command */
5142 bp
->mcast_obj
.raw
.clear_pending(&bp
->mcast_obj
.raw
);
5144 /* If there are pending mcast commands - send them */
5145 if (bp
->mcast_obj
.check_pending(&bp
->mcast_obj
)) {
5146 rc
= bnx2x_config_mcast(bp
, &rparam
, BNX2X_MCAST_CMD_CONT
);
5148 BNX2X_ERR("Failed to send pending mcast commands: %d\n",
5152 netif_addr_unlock_bh(bp
->dev
);
5155 static void bnx2x_handle_classification_eqe(struct bnx2x
*bp
,
5156 union event_ring_elem
*elem
)
5158 unsigned long ramrod_flags
= 0;
5160 u32 cid
= elem
->message
.data
.eth_event
.echo
& BNX2X_SWCID_MASK
;
5161 struct bnx2x_vlan_mac_obj
*vlan_mac_obj
;
5163 /* Always push next commands out, don't wait here */
5164 __set_bit(RAMROD_CONT
, &ramrod_flags
);
5166 switch (le32_to_cpu((__force __le32
)elem
->message
.data
.eth_event
.echo
)
5167 >> BNX2X_SWCID_SHIFT
) {
5168 case BNX2X_FILTER_MAC_PENDING
:
5169 DP(BNX2X_MSG_SP
, "Got SETUP_MAC completions\n");
5170 if (CNIC_LOADED(bp
) && (cid
== BNX2X_ISCSI_ETH_CID(bp
)))
5171 vlan_mac_obj
= &bp
->iscsi_l2_mac_obj
;
5173 vlan_mac_obj
= &bp
->sp_objs
[cid
].mac_obj
;
5176 case BNX2X_FILTER_MCAST_PENDING
:
5177 DP(BNX2X_MSG_SP
, "Got SETUP_MCAST completions\n");
5178 /* This is only relevant for 57710 where multicast MACs are
5179 * configured as unicast MACs using the same ramrod.
5181 bnx2x_handle_mcast_eqe(bp
);
5184 BNX2X_ERR("Unsupported classification command: %d\n",
5185 elem
->message
.data
.eth_event
.echo
);
5189 rc
= vlan_mac_obj
->complete(bp
, vlan_mac_obj
, elem
, &ramrod_flags
);
5192 BNX2X_ERR("Failed to schedule new commands: %d\n", rc
);
5194 DP(BNX2X_MSG_SP
, "Scheduled next pending commands...\n");
5197 static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x
*bp
, bool start
);
5199 static void bnx2x_handle_rx_mode_eqe(struct bnx2x
*bp
)
5201 netif_addr_lock_bh(bp
->dev
);
5203 clear_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
);
5205 /* Send rx_mode command again if was requested */
5206 if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED
, &bp
->sp_state
))
5207 bnx2x_set_storm_rx_mode(bp
);
5208 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED
,
5210 bnx2x_set_iscsi_eth_rx_mode(bp
, true);
5211 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED
,
5213 bnx2x_set_iscsi_eth_rx_mode(bp
, false);
5215 netif_addr_unlock_bh(bp
->dev
);
5218 static void bnx2x_after_afex_vif_lists(struct bnx2x
*bp
,
5219 union event_ring_elem
*elem
)
5221 if (elem
->message
.data
.vif_list_event
.echo
== VIF_LIST_RULE_GET
) {
5223 "afex: ramrod completed VIF LIST_GET, addrs 0x%x\n",
5224 elem
->message
.data
.vif_list_event
.func_bit_map
);
5225 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_LISTGET_ACK
,
5226 elem
->message
.data
.vif_list_event
.func_bit_map
);
5227 } else if (elem
->message
.data
.vif_list_event
.echo
==
5228 VIF_LIST_RULE_SET
) {
5229 DP(BNX2X_MSG_SP
, "afex: ramrod completed VIF LIST_SET\n");
5230 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_LISTSET_ACK
, 0);
5234 /* called with rtnl_lock */
5235 static void bnx2x_after_function_update(struct bnx2x
*bp
)
5238 struct bnx2x_fastpath
*fp
;
5239 struct bnx2x_queue_state_params queue_params
= {NULL
};
5240 struct bnx2x_queue_update_params
*q_update_params
=
5241 &queue_params
.params
.update
;
5243 /* Send Q update command with afex vlan removal values for all Qs */
5244 queue_params
.cmd
= BNX2X_Q_CMD_UPDATE
;
5246 /* set silent vlan removal values according to vlan mode */
5247 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG
,
5248 &q_update_params
->update_flags
);
5249 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM
,
5250 &q_update_params
->update_flags
);
5251 __set_bit(RAMROD_COMP_WAIT
, &queue_params
.ramrod_flags
);
5253 /* in access mode mark mask and value are 0 to strip all vlans */
5254 if (bp
->afex_vlan_mode
== FUNC_MF_CFG_AFEX_VLAN_ACCESS_MODE
) {
5255 q_update_params
->silent_removal_value
= 0;
5256 q_update_params
->silent_removal_mask
= 0;
5258 q_update_params
->silent_removal_value
=
5259 (bp
->afex_def_vlan_tag
& VLAN_VID_MASK
);
5260 q_update_params
->silent_removal_mask
= VLAN_VID_MASK
;
5263 for_each_eth_queue(bp
, q
) {
5264 /* Set the appropriate Queue object */
5266 queue_params
.q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
5268 /* send the ramrod */
5269 rc
= bnx2x_queue_state_change(bp
, &queue_params
);
5271 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n",
5275 if (!NO_FCOE(bp
) && CNIC_ENABLED(bp
)) {
5276 fp
= &bp
->fp
[FCOE_IDX(bp
)];
5277 queue_params
.q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
5279 /* clear pending completion bit */
5280 __clear_bit(RAMROD_COMP_WAIT
, &queue_params
.ramrod_flags
);
5282 /* mark latest Q bit */
5283 smp_mb__before_atomic();
5284 set_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING
, &bp
->sp_state
);
5285 smp_mb__after_atomic();
5287 /* send Q update ramrod for FCoE Q */
5288 rc
= bnx2x_queue_state_change(bp
, &queue_params
);
5290 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n",
5293 /* If no FCoE ring - ACK MCP now */
5294 bnx2x_link_report(bp
);
5295 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_VIFSET_ACK
, 0);
5299 static struct bnx2x_queue_sp_obj
*bnx2x_cid_to_q_obj(
5300 struct bnx2x
*bp
, u32 cid
)
5302 DP(BNX2X_MSG_SP
, "retrieving fp from cid %d\n", cid
);
5304 if (CNIC_LOADED(bp
) && (cid
== BNX2X_FCOE_ETH_CID(bp
)))
5305 return &bnx2x_fcoe_sp_obj(bp
, q_obj
);
5307 return &bp
->sp_objs
[CID_TO_FP(cid
, bp
)].q_obj
;
5310 static void bnx2x_eq_int(struct bnx2x
*bp
)
5312 u16 hw_cons
, sw_cons
, sw_prod
;
5313 union event_ring_elem
*elem
;
5317 int rc
, spqe_cnt
= 0;
5318 struct bnx2x_queue_sp_obj
*q_obj
;
5319 struct bnx2x_func_sp_obj
*f_obj
= &bp
->func_obj
;
5320 struct bnx2x_raw_obj
*rss_raw
= &bp
->rss_conf_obj
.raw
;
5322 hw_cons
= le16_to_cpu(*bp
->eq_cons_sb
);
5324 /* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256.
5325 * when we get the next-page we need to adjust so the loop
5326 * condition below will be met. The next element is the size of a
5327 * regular element and hence incrementing by 1
5329 if ((hw_cons
& EQ_DESC_MAX_PAGE
) == EQ_DESC_MAX_PAGE
)
5332 /* This function may never run in parallel with itself for a
5333 * specific bp, thus there is no need in "paired" read memory
5336 sw_cons
= bp
->eq_cons
;
5337 sw_prod
= bp
->eq_prod
;
5339 DP(BNX2X_MSG_SP
, "EQ: hw_cons %u sw_cons %u bp->eq_spq_left %x\n",
5340 hw_cons
, sw_cons
, atomic_read(&bp
->eq_spq_left
));
5342 for (; sw_cons
!= hw_cons
;
5343 sw_prod
= NEXT_EQ_IDX(sw_prod
), sw_cons
= NEXT_EQ_IDX(sw_cons
)) {
5345 elem
= &bp
->eq_ring
[EQ_DESC(sw_cons
)];
5347 rc
= bnx2x_iov_eq_sp_event(bp
, elem
);
5349 DP(BNX2X_MSG_IOV
, "bnx2x_iov_eq_sp_event returned %d\n",
5354 /* elem CID originates from FW; actually LE */
5355 cid
= SW_CID((__force __le32
)
5356 elem
->message
.data
.cfc_del_event
.cid
);
5357 opcode
= elem
->message
.opcode
;
5359 /* handle eq element */
5361 case EVENT_RING_OPCODE_VF_PF_CHANNEL
:
5362 bnx2x_vf_mbx_schedule(bp
,
5363 &elem
->message
.data
.vf_pf_event
);
5366 case EVENT_RING_OPCODE_STAT_QUERY
:
5367 DP_AND((BNX2X_MSG_SP
| BNX2X_MSG_STATS
),
5368 "got statistics comp event %d\n",
5370 /* nothing to do with stats comp */
5373 case EVENT_RING_OPCODE_CFC_DEL
:
5374 /* handle according to cid range */
5376 * we may want to verify here that the bp state is
5380 "got delete ramrod for MULTI[%d]\n", cid
);
5382 if (CNIC_LOADED(bp
) &&
5383 !bnx2x_cnic_handle_cfc_del(bp
, cid
, elem
))
5386 q_obj
= bnx2x_cid_to_q_obj(bp
, cid
);
5388 if (q_obj
->complete_cmd(bp
, q_obj
, BNX2X_Q_CMD_CFC_DEL
))
5393 case EVENT_RING_OPCODE_STOP_TRAFFIC
:
5394 DP(BNX2X_MSG_SP
| BNX2X_MSG_DCB
, "got STOP TRAFFIC\n");
5395 bnx2x_dcbx_set_params(bp
, BNX2X_DCBX_STATE_TX_PAUSED
);
5396 if (f_obj
->complete_cmd(bp
, f_obj
,
5397 BNX2X_F_CMD_TX_STOP
))
5401 case EVENT_RING_OPCODE_START_TRAFFIC
:
5402 DP(BNX2X_MSG_SP
| BNX2X_MSG_DCB
, "got START TRAFFIC\n");
5403 bnx2x_dcbx_set_params(bp
, BNX2X_DCBX_STATE_TX_RELEASED
);
5404 if (f_obj
->complete_cmd(bp
, f_obj
,
5405 BNX2X_F_CMD_TX_START
))
5409 case EVENT_RING_OPCODE_FUNCTION_UPDATE
:
5410 echo
= elem
->message
.data
.function_update_event
.echo
;
5411 if (echo
== SWITCH_UPDATE
) {
5412 DP(BNX2X_MSG_SP
| NETIF_MSG_IFUP
,
5413 "got FUNC_SWITCH_UPDATE ramrod\n");
5414 if (f_obj
->complete_cmd(
5415 bp
, f_obj
, BNX2X_F_CMD_SWITCH_UPDATE
))
5419 int cmd
= BNX2X_SP_RTNL_AFEX_F_UPDATE
;
5421 DP(BNX2X_MSG_SP
| BNX2X_MSG_MCP
,
5422 "AFEX: ramrod completed FUNCTION_UPDATE\n");
5423 f_obj
->complete_cmd(bp
, f_obj
,
5424 BNX2X_F_CMD_AFEX_UPDATE
);
5426 /* We will perform the Queues update from
5427 * sp_rtnl task as all Queue SP operations
5428 * should run under rtnl_lock.
5430 bnx2x_schedule_sp_rtnl(bp
, cmd
, 0);
5435 case EVENT_RING_OPCODE_AFEX_VIF_LISTS
:
5436 f_obj
->complete_cmd(bp
, f_obj
,
5437 BNX2X_F_CMD_AFEX_VIFLISTS
);
5438 bnx2x_after_afex_vif_lists(bp
, elem
);
5440 case EVENT_RING_OPCODE_FUNCTION_START
:
5441 DP(BNX2X_MSG_SP
| NETIF_MSG_IFUP
,
5442 "got FUNC_START ramrod\n");
5443 if (f_obj
->complete_cmd(bp
, f_obj
, BNX2X_F_CMD_START
))
5448 case EVENT_RING_OPCODE_FUNCTION_STOP
:
5449 DP(BNX2X_MSG_SP
| NETIF_MSG_IFUP
,
5450 "got FUNC_STOP ramrod\n");
5451 if (f_obj
->complete_cmd(bp
, f_obj
, BNX2X_F_CMD_STOP
))
5457 switch (opcode
| bp
->state
) {
5458 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES
|
5460 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES
|
5461 BNX2X_STATE_OPENING_WAIT4_PORT
):
5462 cid
= elem
->message
.data
.eth_event
.echo
&
5464 DP(BNX2X_MSG_SP
, "got RSS_UPDATE ramrod. CID %d\n",
5466 rss_raw
->clear_pending(rss_raw
);
5469 case (EVENT_RING_OPCODE_SET_MAC
| BNX2X_STATE_OPEN
):
5470 case (EVENT_RING_OPCODE_SET_MAC
| BNX2X_STATE_DIAG
):
5471 case (EVENT_RING_OPCODE_SET_MAC
|
5472 BNX2X_STATE_CLOSING_WAIT4_HALT
):
5473 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES
|
5475 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES
|
5477 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES
|
5478 BNX2X_STATE_CLOSING_WAIT4_HALT
):
5479 DP(BNX2X_MSG_SP
, "got (un)set mac ramrod\n");
5480 bnx2x_handle_classification_eqe(bp
, elem
);
5483 case (EVENT_RING_OPCODE_MULTICAST_RULES
|
5485 case (EVENT_RING_OPCODE_MULTICAST_RULES
|
5487 case (EVENT_RING_OPCODE_MULTICAST_RULES
|
5488 BNX2X_STATE_CLOSING_WAIT4_HALT
):
5489 DP(BNX2X_MSG_SP
, "got mcast ramrod\n");
5490 bnx2x_handle_mcast_eqe(bp
);
5493 case (EVENT_RING_OPCODE_FILTERS_RULES
|
5495 case (EVENT_RING_OPCODE_FILTERS_RULES
|
5497 case (EVENT_RING_OPCODE_FILTERS_RULES
|
5498 BNX2X_STATE_CLOSING_WAIT4_HALT
):
5499 DP(BNX2X_MSG_SP
, "got rx_mode ramrod\n");
5500 bnx2x_handle_rx_mode_eqe(bp
);
5503 /* unknown event log error and continue */
5504 BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n",
5505 elem
->message
.opcode
, bp
->state
);
5511 smp_mb__before_atomic();
5512 atomic_add(spqe_cnt
, &bp
->eq_spq_left
);
5514 bp
->eq_cons
= sw_cons
;
5515 bp
->eq_prod
= sw_prod
;
5516 /* Make sure that above mem writes were issued towards the memory */
5519 /* update producer */
5520 bnx2x_update_eq_prod(bp
, bp
->eq_prod
);
5523 static void bnx2x_sp_task(struct work_struct
*work
)
5525 struct bnx2x
*bp
= container_of(work
, struct bnx2x
, sp_task
.work
);
5527 DP(BNX2X_MSG_SP
, "sp task invoked\n");
5529 /* make sure the atomic interrupt_occurred has been written */
5531 if (atomic_read(&bp
->interrupt_occurred
)) {
5533 /* what work needs to be performed? */
5534 u16 status
= bnx2x_update_dsb_idx(bp
);
5536 DP(BNX2X_MSG_SP
, "status %x\n", status
);
5537 DP(BNX2X_MSG_SP
, "setting interrupt_occurred to 0\n");
5538 atomic_set(&bp
->interrupt_occurred
, 0);
5541 if (status
& BNX2X_DEF_SB_ATT_IDX
) {
5543 status
&= ~BNX2X_DEF_SB_ATT_IDX
;
5546 /* SP events: STAT_QUERY and others */
5547 if (status
& BNX2X_DEF_SB_IDX
) {
5548 struct bnx2x_fastpath
*fp
= bnx2x_fcoe_fp(bp
);
5550 if (FCOE_INIT(bp
) &&
5551 (bnx2x_has_rx_work(fp
) || bnx2x_has_tx_work(fp
))) {
5552 /* Prevent local bottom-halves from running as
5553 * we are going to change the local NAPI list.
5556 napi_schedule(&bnx2x_fcoe(bp
, napi
));
5560 /* Handle EQ completions */
5562 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
, USTORM_ID
,
5563 le16_to_cpu(bp
->def_idx
), IGU_INT_NOP
, 1);
5565 status
&= ~BNX2X_DEF_SB_IDX
;
5568 /* if status is non zero then perhaps something went wrong */
5569 if (unlikely(status
))
5571 "got an unknown interrupt! (status 0x%x)\n", status
);
5573 /* ack status block only if something was actually handled */
5574 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
, ATTENTION_ID
,
5575 le16_to_cpu(bp
->def_att_idx
), IGU_INT_ENABLE
, 1);
5578 /* afex - poll to check if VIFSET_ACK should be sent to MFW */
5579 if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK
,
5581 bnx2x_link_report(bp
);
5582 bnx2x_fw_command(bp
, DRV_MSG_CODE_AFEX_VIFSET_ACK
, 0);
5586 irqreturn_t
bnx2x_msix_sp_int(int irq
, void *dev_instance
)
5588 struct net_device
*dev
= dev_instance
;
5589 struct bnx2x
*bp
= netdev_priv(dev
);
5591 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
, USTORM_ID
, 0,
5592 IGU_INT_DISABLE
, 0);
5594 #ifdef BNX2X_STOP_ON_ERROR
5595 if (unlikely(bp
->panic
))
5599 if (CNIC_LOADED(bp
)) {
5600 struct cnic_ops
*c_ops
;
5603 c_ops
= rcu_dereference(bp
->cnic_ops
);
5605 c_ops
->cnic_handler(bp
->cnic_data
, NULL
);
5609 /* schedule sp task to perform default status block work, ack
5610 * attentions and enable interrupts.
5612 bnx2x_schedule_sp_task(bp
);
5617 /* end of slow path */
5619 void bnx2x_drv_pulse(struct bnx2x
*bp
)
5621 SHMEM_WR(bp
, func_mb
[BP_FW_MB_IDX(bp
)].drv_pulse_mb
,
5622 bp
->fw_drv_pulse_wr_seq
);
5625 static void bnx2x_timer(unsigned long data
)
5627 struct bnx2x
*bp
= (struct bnx2x
*) data
;
5629 if (!netif_running(bp
->dev
))
5634 int mb_idx
= BP_FW_MB_IDX(bp
);
5638 ++bp
->fw_drv_pulse_wr_seq
;
5639 bp
->fw_drv_pulse_wr_seq
&= DRV_PULSE_SEQ_MASK
;
5640 drv_pulse
= bp
->fw_drv_pulse_wr_seq
;
5641 bnx2x_drv_pulse(bp
);
5643 mcp_pulse
= (SHMEM_RD(bp
, func_mb
[mb_idx
].mcp_pulse_mb
) &
5644 MCP_PULSE_SEQ_MASK
);
5645 /* The delta between driver pulse and mcp response
5646 * should not get too big. If the MFW is more than 5 pulses
5647 * behind, we should worry about it enough to generate an error
5650 if (((drv_pulse
- mcp_pulse
) & MCP_PULSE_SEQ_MASK
) > 5)
5651 BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
5652 drv_pulse
, mcp_pulse
);
5655 if (bp
->state
== BNX2X_STATE_OPEN
)
5656 bnx2x_stats_handle(bp
, STATS_EVENT_UPDATE
);
5658 /* sample pf vf bulletin board for new posts from pf */
5660 bnx2x_timer_sriov(bp
);
5662 mod_timer(&bp
->timer
, jiffies
+ bp
->current_interval
);
5665 /* end of Statistics */
5670 * nic init service functions
5673 static void bnx2x_fill(struct bnx2x
*bp
, u32 addr
, int fill
, u32 len
)
5676 if (!(len
%4) && !(addr
%4))
5677 for (i
= 0; i
< len
; i
+= 4)
5678 REG_WR(bp
, addr
+ i
, fill
);
5680 for (i
= 0; i
< len
; i
++)
5681 REG_WR8(bp
, addr
+ i
, fill
);
5684 /* helper: writes FP SP data to FW - data_size in dwords */
5685 static void bnx2x_wr_fp_sb_data(struct bnx2x
*bp
,
5691 for (index
= 0; index
< data_size
; index
++)
5692 REG_WR(bp
, BAR_CSTRORM_INTMEM
+
5693 CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id
) +
5695 *(sb_data_p
+ index
));
5698 static void bnx2x_zero_fp_sb(struct bnx2x
*bp
, int fw_sb_id
)
5702 struct hc_status_block_data_e2 sb_data_e2
;
5703 struct hc_status_block_data_e1x sb_data_e1x
;
5705 /* disable the function first */
5706 if (!CHIP_IS_E1x(bp
)) {
5707 memset(&sb_data_e2
, 0, sizeof(struct hc_status_block_data_e2
));
5708 sb_data_e2
.common
.state
= SB_DISABLED
;
5709 sb_data_e2
.common
.p_func
.vf_valid
= false;
5710 sb_data_p
= (u32
*)&sb_data_e2
;
5711 data_size
= sizeof(struct hc_status_block_data_e2
)/sizeof(u32
);
5713 memset(&sb_data_e1x
, 0,
5714 sizeof(struct hc_status_block_data_e1x
));
5715 sb_data_e1x
.common
.state
= SB_DISABLED
;
5716 sb_data_e1x
.common
.p_func
.vf_valid
= false;
5717 sb_data_p
= (u32
*)&sb_data_e1x
;
5718 data_size
= sizeof(struct hc_status_block_data_e1x
)/sizeof(u32
);
5720 bnx2x_wr_fp_sb_data(bp
, fw_sb_id
, sb_data_p
, data_size
);
5722 bnx2x_fill(bp
, BAR_CSTRORM_INTMEM
+
5723 CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id
), 0,
5724 CSTORM_STATUS_BLOCK_SIZE
);
5725 bnx2x_fill(bp
, BAR_CSTRORM_INTMEM
+
5726 CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id
), 0,
5727 CSTORM_SYNC_BLOCK_SIZE
);
5730 /* helper: writes SP SB data to FW */
5731 static void bnx2x_wr_sp_sb_data(struct bnx2x
*bp
,
5732 struct hc_sp_status_block_data
*sp_sb_data
)
5734 int func
= BP_FUNC(bp
);
5736 for (i
= 0; i
< sizeof(struct hc_sp_status_block_data
)/sizeof(u32
); i
++)
5737 REG_WR(bp
, BAR_CSTRORM_INTMEM
+
5738 CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func
) +
5740 *((u32
*)sp_sb_data
+ i
));
5743 static void bnx2x_zero_sp_sb(struct bnx2x
*bp
)
5745 int func
= BP_FUNC(bp
);
5746 struct hc_sp_status_block_data sp_sb_data
;
5747 memset(&sp_sb_data
, 0, sizeof(struct hc_sp_status_block_data
));
5749 sp_sb_data
.state
= SB_DISABLED
;
5750 sp_sb_data
.p_func
.vf_valid
= false;
5752 bnx2x_wr_sp_sb_data(bp
, &sp_sb_data
);
5754 bnx2x_fill(bp
, BAR_CSTRORM_INTMEM
+
5755 CSTORM_SP_STATUS_BLOCK_OFFSET(func
), 0,
5756 CSTORM_SP_STATUS_BLOCK_SIZE
);
5757 bnx2x_fill(bp
, BAR_CSTRORM_INTMEM
+
5758 CSTORM_SP_SYNC_BLOCK_OFFSET(func
), 0,
5759 CSTORM_SP_SYNC_BLOCK_SIZE
);
5762 static void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm
*hc_sm
,
5763 int igu_sb_id
, int igu_seg_id
)
5765 hc_sm
->igu_sb_id
= igu_sb_id
;
5766 hc_sm
->igu_seg_id
= igu_seg_id
;
5767 hc_sm
->timer_value
= 0xFF;
5768 hc_sm
->time_to_expire
= 0xFFFFFFFF;
5771 /* allocates state machine ids. */
5772 static void bnx2x_map_sb_state_machines(struct hc_index_data
*index_data
)
5774 /* zero out state machine indices */
5776 index_data
[HC_INDEX_ETH_RX_CQ_CONS
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5779 index_data
[HC_INDEX_OOO_TX_CQ_CONS
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5780 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS0
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5781 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS1
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5782 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS2
].flags
&= ~HC_INDEX_DATA_SM_ID
;
5786 index_data
[HC_INDEX_ETH_RX_CQ_CONS
].flags
|=
5787 SM_RX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5790 index_data
[HC_INDEX_OOO_TX_CQ_CONS
].flags
|=
5791 SM_TX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5792 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS0
].flags
|=
5793 SM_TX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5794 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS1
].flags
|=
5795 SM_TX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5796 index_data
[HC_INDEX_ETH_TX_CQ_CONS_COS2
].flags
|=
5797 SM_TX_ID
<< HC_INDEX_DATA_SM_ID_SHIFT
;
5800 void bnx2x_init_sb(struct bnx2x
*bp
, dma_addr_t mapping
, int vfid
,
5801 u8 vf_valid
, int fw_sb_id
, int igu_sb_id
)
5805 struct hc_status_block_data_e2 sb_data_e2
;
5806 struct hc_status_block_data_e1x sb_data_e1x
;
5807 struct hc_status_block_sm
*hc_sm_p
;
5811 if (CHIP_INT_MODE_IS_BC(bp
))
5812 igu_seg_id
= HC_SEG_ACCESS_NORM
;
5814 igu_seg_id
= IGU_SEG_ACCESS_NORM
;
5816 bnx2x_zero_fp_sb(bp
, fw_sb_id
);
5818 if (!CHIP_IS_E1x(bp
)) {
5819 memset(&sb_data_e2
, 0, sizeof(struct hc_status_block_data_e2
));
5820 sb_data_e2
.common
.state
= SB_ENABLED
;
5821 sb_data_e2
.common
.p_func
.pf_id
= BP_FUNC(bp
);
5822 sb_data_e2
.common
.p_func
.vf_id
= vfid
;
5823 sb_data_e2
.common
.p_func
.vf_valid
= vf_valid
;
5824 sb_data_e2
.common
.p_func
.vnic_id
= BP_VN(bp
);
5825 sb_data_e2
.common
.same_igu_sb_1b
= true;
5826 sb_data_e2
.common
.host_sb_addr
.hi
= U64_HI(mapping
);
5827 sb_data_e2
.common
.host_sb_addr
.lo
= U64_LO(mapping
);
5828 hc_sm_p
= sb_data_e2
.common
.state_machine
;
5829 sb_data_p
= (u32
*)&sb_data_e2
;
5830 data_size
= sizeof(struct hc_status_block_data_e2
)/sizeof(u32
);
5831 bnx2x_map_sb_state_machines(sb_data_e2
.index_data
);
5833 memset(&sb_data_e1x
, 0,
5834 sizeof(struct hc_status_block_data_e1x
));
5835 sb_data_e1x
.common
.state
= SB_ENABLED
;
5836 sb_data_e1x
.common
.p_func
.pf_id
= BP_FUNC(bp
);
5837 sb_data_e1x
.common
.p_func
.vf_id
= 0xff;
5838 sb_data_e1x
.common
.p_func
.vf_valid
= false;
5839 sb_data_e1x
.common
.p_func
.vnic_id
= BP_VN(bp
);
5840 sb_data_e1x
.common
.same_igu_sb_1b
= true;
5841 sb_data_e1x
.common
.host_sb_addr
.hi
= U64_HI(mapping
);
5842 sb_data_e1x
.common
.host_sb_addr
.lo
= U64_LO(mapping
);
5843 hc_sm_p
= sb_data_e1x
.common
.state_machine
;
5844 sb_data_p
= (u32
*)&sb_data_e1x
;
5845 data_size
= sizeof(struct hc_status_block_data_e1x
)/sizeof(u32
);
5846 bnx2x_map_sb_state_machines(sb_data_e1x
.index_data
);
5849 bnx2x_setup_ndsb_state_machine(&hc_sm_p
[SM_RX_ID
],
5850 igu_sb_id
, igu_seg_id
);
5851 bnx2x_setup_ndsb_state_machine(&hc_sm_p
[SM_TX_ID
],
5852 igu_sb_id
, igu_seg_id
);
5854 DP(NETIF_MSG_IFUP
, "Init FW SB %d\n", fw_sb_id
);
5856 /* write indices to HW - PCI guarantees endianity of regpairs */
5857 bnx2x_wr_fp_sb_data(bp
, fw_sb_id
, sb_data_p
, data_size
);
5860 static void bnx2x_update_coalesce_sb(struct bnx2x
*bp
, u8 fw_sb_id
,
5861 u16 tx_usec
, u16 rx_usec
)
5863 bnx2x_update_coalesce_sb_index(bp
, fw_sb_id
, HC_INDEX_ETH_RX_CQ_CONS
,
5865 bnx2x_update_coalesce_sb_index(bp
, fw_sb_id
,
5866 HC_INDEX_ETH_TX_CQ_CONS_COS0
, false,
5868 bnx2x_update_coalesce_sb_index(bp
, fw_sb_id
,
5869 HC_INDEX_ETH_TX_CQ_CONS_COS1
, false,
5871 bnx2x_update_coalesce_sb_index(bp
, fw_sb_id
,
5872 HC_INDEX_ETH_TX_CQ_CONS_COS2
, false,
5876 static void bnx2x_init_def_sb(struct bnx2x
*bp
)
5878 struct host_sp_status_block
*def_sb
= bp
->def_status_blk
;
5879 dma_addr_t mapping
= bp
->def_status_blk_mapping
;
5880 int igu_sp_sb_index
;
5882 int port
= BP_PORT(bp
);
5883 int func
= BP_FUNC(bp
);
5884 int reg_offset
, reg_offset_en5
;
5887 struct hc_sp_status_block_data sp_sb_data
;
5888 memset(&sp_sb_data
, 0, sizeof(struct hc_sp_status_block_data
));
5890 if (CHIP_INT_MODE_IS_BC(bp
)) {
5891 igu_sp_sb_index
= DEF_SB_IGU_ID
;
5892 igu_seg_id
= HC_SEG_ACCESS_DEF
;
5894 igu_sp_sb_index
= bp
->igu_dsb_id
;
5895 igu_seg_id
= IGU_SEG_ACCESS_DEF
;
5899 section
= ((u64
)mapping
) + offsetof(struct host_sp_status_block
,
5900 atten_status_block
);
5901 def_sb
->atten_status_block
.status_block_id
= igu_sp_sb_index
;
5905 reg_offset
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0
:
5906 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0
);
5907 reg_offset_en5
= (port
? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0
:
5908 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0
);
5909 for (index
= 0; index
< MAX_DYNAMIC_ATTN_GRPS
; index
++) {
5911 /* take care of sig[0]..sig[4] */
5912 for (sindex
= 0; sindex
< 4; sindex
++)
5913 bp
->attn_group
[index
].sig
[sindex
] =
5914 REG_RD(bp
, reg_offset
+ sindex
*0x4 + 0x10*index
);
5916 if (!CHIP_IS_E1x(bp
))
5918 * enable5 is separate from the rest of the registers,
5919 * and therefore the address skip is 4
5920 * and not 16 between the different groups
5922 bp
->attn_group
[index
].sig
[4] = REG_RD(bp
,
5923 reg_offset_en5
+ 0x4*index
);
5925 bp
->attn_group
[index
].sig
[4] = 0;
5928 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
5929 reg_offset
= (port
? HC_REG_ATTN_MSG1_ADDR_L
:
5930 HC_REG_ATTN_MSG0_ADDR_L
);
5932 REG_WR(bp
, reg_offset
, U64_LO(section
));
5933 REG_WR(bp
, reg_offset
+ 4, U64_HI(section
));
5934 } else if (!CHIP_IS_E1x(bp
)) {
5935 REG_WR(bp
, IGU_REG_ATTN_MSG_ADDR_L
, U64_LO(section
));
5936 REG_WR(bp
, IGU_REG_ATTN_MSG_ADDR_H
, U64_HI(section
));
5939 section
= ((u64
)mapping
) + offsetof(struct host_sp_status_block
,
5942 bnx2x_zero_sp_sb(bp
);
5944 /* PCI guarantees endianity of regpairs */
5945 sp_sb_data
.state
= SB_ENABLED
;
5946 sp_sb_data
.host_sb_addr
.lo
= U64_LO(section
);
5947 sp_sb_data
.host_sb_addr
.hi
= U64_HI(section
);
5948 sp_sb_data
.igu_sb_id
= igu_sp_sb_index
;
5949 sp_sb_data
.igu_seg_id
= igu_seg_id
;
5950 sp_sb_data
.p_func
.pf_id
= func
;
5951 sp_sb_data
.p_func
.vnic_id
= BP_VN(bp
);
5952 sp_sb_data
.p_func
.vf_id
= 0xff;
5954 bnx2x_wr_sp_sb_data(bp
, &sp_sb_data
);
5956 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
, USTORM_ID
, 0, IGU_INT_ENABLE
, 0);
5959 void bnx2x_update_coalesce(struct bnx2x
*bp
)
5963 for_each_eth_queue(bp
, i
)
5964 bnx2x_update_coalesce_sb(bp
, bp
->fp
[i
].fw_sb_id
,
5965 bp
->tx_ticks
, bp
->rx_ticks
);
5968 static void bnx2x_init_sp_ring(struct bnx2x
*bp
)
5970 spin_lock_init(&bp
->spq_lock
);
5971 atomic_set(&bp
->cq_spq_left
, MAX_SPQ_PENDING
);
5973 bp
->spq_prod_idx
= 0;
5974 bp
->dsb_sp_prod
= BNX2X_SP_DSB_INDEX
;
5975 bp
->spq_prod_bd
= bp
->spq
;
5976 bp
->spq_last_bd
= bp
->spq_prod_bd
+ MAX_SP_DESC_CNT
;
5979 static void bnx2x_init_eq_ring(struct bnx2x
*bp
)
5982 for (i
= 1; i
<= NUM_EQ_PAGES
; i
++) {
5983 union event_ring_elem
*elem
=
5984 &bp
->eq_ring
[EQ_DESC_CNT_PAGE
* i
- 1];
5986 elem
->next_page
.addr
.hi
=
5987 cpu_to_le32(U64_HI(bp
->eq_mapping
+
5988 BCM_PAGE_SIZE
* (i
% NUM_EQ_PAGES
)));
5989 elem
->next_page
.addr
.lo
=
5990 cpu_to_le32(U64_LO(bp
->eq_mapping
+
5991 BCM_PAGE_SIZE
*(i
% NUM_EQ_PAGES
)));
5994 bp
->eq_prod
= NUM_EQ_DESC
;
5995 bp
->eq_cons_sb
= BNX2X_EQ_INDEX
;
5996 /* we want a warning message before it gets wrought... */
5997 atomic_set(&bp
->eq_spq_left
,
5998 min_t(int, MAX_SP_DESC_CNT
- MAX_SPQ_PENDING
, NUM_EQ_DESC
) - 1);
6001 /* called with netif_addr_lock_bh() */
6002 static int bnx2x_set_q_rx_mode(struct bnx2x
*bp
, u8 cl_id
,
6003 unsigned long rx_mode_flags
,
6004 unsigned long rx_accept_flags
,
6005 unsigned long tx_accept_flags
,
6006 unsigned long ramrod_flags
)
6008 struct bnx2x_rx_mode_ramrod_params ramrod_param
;
6011 memset(&ramrod_param
, 0, sizeof(ramrod_param
));
6013 /* Prepare ramrod parameters */
6014 ramrod_param
.cid
= 0;
6015 ramrod_param
.cl_id
= cl_id
;
6016 ramrod_param
.rx_mode_obj
= &bp
->rx_mode_obj
;
6017 ramrod_param
.func_id
= BP_FUNC(bp
);
6019 ramrod_param
.pstate
= &bp
->sp_state
;
6020 ramrod_param
.state
= BNX2X_FILTER_RX_MODE_PENDING
;
6022 ramrod_param
.rdata
= bnx2x_sp(bp
, rx_mode_rdata
);
6023 ramrod_param
.rdata_mapping
= bnx2x_sp_mapping(bp
, rx_mode_rdata
);
6025 set_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
);
6027 ramrod_param
.ramrod_flags
= ramrod_flags
;
6028 ramrod_param
.rx_mode_flags
= rx_mode_flags
;
6030 ramrod_param
.rx_accept_flags
= rx_accept_flags
;
6031 ramrod_param
.tx_accept_flags
= tx_accept_flags
;
6033 rc
= bnx2x_config_rx_mode(bp
, &ramrod_param
);
6035 BNX2X_ERR("Set rx_mode %d failed\n", bp
->rx_mode
);
6042 static int bnx2x_fill_accept_flags(struct bnx2x
*bp
, u32 rx_mode
,
6043 unsigned long *rx_accept_flags
,
6044 unsigned long *tx_accept_flags
)
6046 /* Clear the flags first */
6047 *rx_accept_flags
= 0;
6048 *tx_accept_flags
= 0;
6051 case BNX2X_RX_MODE_NONE
:
6053 * 'drop all' supersedes any accept flags that may have been
6054 * passed to the function.
6057 case BNX2X_RX_MODE_NORMAL
:
6058 __set_bit(BNX2X_ACCEPT_UNICAST
, rx_accept_flags
);
6059 __set_bit(BNX2X_ACCEPT_MULTICAST
, rx_accept_flags
);
6060 __set_bit(BNX2X_ACCEPT_BROADCAST
, rx_accept_flags
);
6062 /* internal switching mode */
6063 __set_bit(BNX2X_ACCEPT_UNICAST
, tx_accept_flags
);
6064 __set_bit(BNX2X_ACCEPT_MULTICAST
, tx_accept_flags
);
6065 __set_bit(BNX2X_ACCEPT_BROADCAST
, tx_accept_flags
);
6068 case BNX2X_RX_MODE_ALLMULTI
:
6069 __set_bit(BNX2X_ACCEPT_UNICAST
, rx_accept_flags
);
6070 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, rx_accept_flags
);
6071 __set_bit(BNX2X_ACCEPT_BROADCAST
, rx_accept_flags
);
6073 /* internal switching mode */
6074 __set_bit(BNX2X_ACCEPT_UNICAST
, tx_accept_flags
);
6075 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, tx_accept_flags
);
6076 __set_bit(BNX2X_ACCEPT_BROADCAST
, tx_accept_flags
);
6079 case BNX2X_RX_MODE_PROMISC
:
6080 /* According to definition of SI mode, iface in promisc mode
6081 * should receive matched and unmatched (in resolution of port)
6084 __set_bit(BNX2X_ACCEPT_UNMATCHED
, rx_accept_flags
);
6085 __set_bit(BNX2X_ACCEPT_UNICAST
, rx_accept_flags
);
6086 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, rx_accept_flags
);
6087 __set_bit(BNX2X_ACCEPT_BROADCAST
, rx_accept_flags
);
6089 /* internal switching mode */
6090 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, tx_accept_flags
);
6091 __set_bit(BNX2X_ACCEPT_BROADCAST
, tx_accept_flags
);
6094 __set_bit(BNX2X_ACCEPT_ALL_UNICAST
, tx_accept_flags
);
6096 __set_bit(BNX2X_ACCEPT_UNICAST
, tx_accept_flags
);
6100 BNX2X_ERR("Unknown rx_mode: %d\n", rx_mode
);
6104 /* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
6105 if (bp
->rx_mode
!= BNX2X_RX_MODE_NONE
) {
6106 __set_bit(BNX2X_ACCEPT_ANY_VLAN
, rx_accept_flags
);
6107 __set_bit(BNX2X_ACCEPT_ANY_VLAN
, tx_accept_flags
);
6113 /* called with netif_addr_lock_bh() */
6114 static int bnx2x_set_storm_rx_mode(struct bnx2x
*bp
)
6116 unsigned long rx_mode_flags
= 0, ramrod_flags
= 0;
6117 unsigned long rx_accept_flags
= 0, tx_accept_flags
= 0;
6121 /* Configure rx_mode of FCoE Queue */
6122 __set_bit(BNX2X_RX_MODE_FCOE_ETH
, &rx_mode_flags
);
6124 rc
= bnx2x_fill_accept_flags(bp
, bp
->rx_mode
, &rx_accept_flags
,
6129 __set_bit(RAMROD_RX
, &ramrod_flags
);
6130 __set_bit(RAMROD_TX
, &ramrod_flags
);
6132 return bnx2x_set_q_rx_mode(bp
, bp
->fp
->cl_id
, rx_mode_flags
,
6133 rx_accept_flags
, tx_accept_flags
,
6137 static void bnx2x_init_internal_common(struct bnx2x
*bp
)
6141 /* Zero this manually as its initialization is
6142 currently missing in the initTool */
6143 for (i
= 0; i
< (USTORM_AGG_DATA_SIZE
>> 2); i
++)
6144 REG_WR(bp
, BAR_USTRORM_INTMEM
+
6145 USTORM_AGG_DATA_OFFSET
+ i
* 4, 0);
6146 if (!CHIP_IS_E1x(bp
)) {
6147 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+ CSTORM_IGU_MODE_OFFSET
,
6148 CHIP_INT_MODE_IS_BC(bp
) ?
6149 HC_IGU_BC_MODE
: HC_IGU_NBC_MODE
);
6153 static void bnx2x_init_internal(struct bnx2x
*bp
, u32 load_code
)
6155 switch (load_code
) {
6156 case FW_MSG_CODE_DRV_LOAD_COMMON
:
6157 case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
:
6158 bnx2x_init_internal_common(bp
);
6161 case FW_MSG_CODE_DRV_LOAD_PORT
:
6165 case FW_MSG_CODE_DRV_LOAD_FUNCTION
:
6166 /* internal memory per function is
6167 initialized inside bnx2x_pf_init */
6171 BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code
);
6176 static inline u8
bnx2x_fp_igu_sb_id(struct bnx2x_fastpath
*fp
)
6178 return fp
->bp
->igu_base_sb
+ fp
->index
+ CNIC_SUPPORT(fp
->bp
);
6181 static inline u8
bnx2x_fp_fw_sb_id(struct bnx2x_fastpath
*fp
)
6183 return fp
->bp
->base_fw_ndsb
+ fp
->index
+ CNIC_SUPPORT(fp
->bp
);
6186 static u8
bnx2x_fp_cl_id(struct bnx2x_fastpath
*fp
)
6188 if (CHIP_IS_E1x(fp
->bp
))
6189 return BP_L_ID(fp
->bp
) + fp
->index
;
6190 else /* We want Client ID to be the same as IGU SB ID for 57712 */
6191 return bnx2x_fp_igu_sb_id(fp
);
6194 static void bnx2x_init_eth_fp(struct bnx2x
*bp
, int fp_idx
)
6196 struct bnx2x_fastpath
*fp
= &bp
->fp
[fp_idx
];
6198 unsigned long q_type
= 0;
6199 u32 cids
[BNX2X_MULTI_TX_COS
] = { 0 };
6200 fp
->rx_queue
= fp_idx
;
6202 fp
->cl_id
= bnx2x_fp_cl_id(fp
);
6203 fp
->fw_sb_id
= bnx2x_fp_fw_sb_id(fp
);
6204 fp
->igu_sb_id
= bnx2x_fp_igu_sb_id(fp
);
6205 /* qZone id equals to FW (per path) client id */
6206 fp
->cl_qzone_id
= bnx2x_fp_qzone_id(fp
);
6209 fp
->ustorm_rx_prods_offset
= bnx2x_rx_ustorm_prods_offset(fp
);
6211 /* Setup SB indices */
6212 fp
->rx_cons_sb
= BNX2X_RX_SB_INDEX
;
6214 /* Configure Queue State object */
6215 __set_bit(BNX2X_Q_TYPE_HAS_RX
, &q_type
);
6216 __set_bit(BNX2X_Q_TYPE_HAS_TX
, &q_type
);
6218 BUG_ON(fp
->max_cos
> BNX2X_MULTI_TX_COS
);
6221 for_each_cos_in_tx_queue(fp
, cos
) {
6222 bnx2x_init_txdata(bp
, fp
->txdata_ptr
[cos
],
6223 CID_COS_TO_TX_ONLY_CID(fp
->cid
, cos
, bp
),
6224 FP_COS_TO_TXQ(fp
, cos
, bp
),
6225 BNX2X_TX_SB_INDEX_BASE
+ cos
, fp
);
6226 cids
[cos
] = fp
->txdata_ptr
[cos
]->cid
;
6229 /* nothing more for vf to do here */
6233 bnx2x_init_sb(bp
, fp
->status_blk_mapping
, BNX2X_VF_ID_INVALID
, false,
6234 fp
->fw_sb_id
, fp
->igu_sb_id
);
6235 bnx2x_update_fpsb_idx(fp
);
6236 bnx2x_init_queue_obj(bp
, &bnx2x_sp_obj(bp
, fp
).q_obj
, fp
->cl_id
, cids
,
6237 fp
->max_cos
, BP_FUNC(bp
), bnx2x_sp(bp
, q_rdata
),
6238 bnx2x_sp_mapping(bp
, q_rdata
), q_type
);
6241 * Configure classification DBs: Always enable Tx switching
6243 bnx2x_init_vlan_mac_fp_objs(fp
, BNX2X_OBJ_TYPE_RX_TX
);
6246 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n",
6247 fp_idx
, bp
, fp
->status_blk
.e2_sb
, fp
->cl_id
, fp
->fw_sb_id
,
6251 static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata
*txdata
)
6255 for (i
= 1; i
<= NUM_TX_RINGS
; i
++) {
6256 struct eth_tx_next_bd
*tx_next_bd
=
6257 &txdata
->tx_desc_ring
[TX_DESC_CNT
* i
- 1].next_bd
;
6259 tx_next_bd
->addr_hi
=
6260 cpu_to_le32(U64_HI(txdata
->tx_desc_mapping
+
6261 BCM_PAGE_SIZE
*(i
% NUM_TX_RINGS
)));
6262 tx_next_bd
->addr_lo
=
6263 cpu_to_le32(U64_LO(txdata
->tx_desc_mapping
+
6264 BCM_PAGE_SIZE
*(i
% NUM_TX_RINGS
)));
6267 *txdata
->tx_cons_sb
= cpu_to_le16(0);
6269 SET_FLAG(txdata
->tx_db
.data
.header
.header
, DOORBELL_HDR_DB_TYPE
, 1);
6270 txdata
->tx_db
.data
.zero_fill1
= 0;
6271 txdata
->tx_db
.data
.prod
= 0;
6273 txdata
->tx_pkt_prod
= 0;
6274 txdata
->tx_pkt_cons
= 0;
6275 txdata
->tx_bd_prod
= 0;
6276 txdata
->tx_bd_cons
= 0;
6280 static void bnx2x_init_tx_rings_cnic(struct bnx2x
*bp
)
6284 for_each_tx_queue_cnic(bp
, i
)
6285 bnx2x_init_tx_ring_one(bp
->fp
[i
].txdata_ptr
[0]);
6288 static void bnx2x_init_tx_rings(struct bnx2x
*bp
)
6293 for_each_eth_queue(bp
, i
)
6294 for_each_cos_in_tx_queue(&bp
->fp
[i
], cos
)
6295 bnx2x_init_tx_ring_one(bp
->fp
[i
].txdata_ptr
[cos
]);
6298 static void bnx2x_init_fcoe_fp(struct bnx2x
*bp
)
6300 struct bnx2x_fastpath
*fp
= bnx2x_fcoe_fp(bp
);
6301 unsigned long q_type
= 0;
6303 bnx2x_fcoe(bp
, rx_queue
) = BNX2X_NUM_ETH_QUEUES(bp
);
6304 bnx2x_fcoe(bp
, cl_id
) = bnx2x_cnic_eth_cl_id(bp
,
6305 BNX2X_FCOE_ETH_CL_ID_IDX
);
6306 bnx2x_fcoe(bp
, cid
) = BNX2X_FCOE_ETH_CID(bp
);
6307 bnx2x_fcoe(bp
, fw_sb_id
) = DEF_SB_ID
;
6308 bnx2x_fcoe(bp
, igu_sb_id
) = bp
->igu_dsb_id
;
6309 bnx2x_fcoe(bp
, rx_cons_sb
) = BNX2X_FCOE_L2_RX_INDEX
;
6310 bnx2x_init_txdata(bp
, bnx2x_fcoe(bp
, txdata_ptr
[0]),
6311 fp
->cid
, FCOE_TXQ_IDX(bp
), BNX2X_FCOE_L2_TX_INDEX
,
6314 DP(NETIF_MSG_IFUP
, "created fcoe tx data (fp index %d)\n", fp
->index
);
6316 /* qZone id equals to FW (per path) client id */
6317 bnx2x_fcoe(bp
, cl_qzone_id
) = bnx2x_fp_qzone_id(fp
);
6319 bnx2x_fcoe(bp
, ustorm_rx_prods_offset
) =
6320 bnx2x_rx_ustorm_prods_offset(fp
);
6322 /* Configure Queue State object */
6323 __set_bit(BNX2X_Q_TYPE_HAS_RX
, &q_type
);
6324 __set_bit(BNX2X_Q_TYPE_HAS_TX
, &q_type
);
6326 /* No multi-CoS for FCoE L2 client */
6327 BUG_ON(fp
->max_cos
!= 1);
6329 bnx2x_init_queue_obj(bp
, &bnx2x_sp_obj(bp
, fp
).q_obj
, fp
->cl_id
,
6330 &fp
->cid
, 1, BP_FUNC(bp
), bnx2x_sp(bp
, q_rdata
),
6331 bnx2x_sp_mapping(bp
, q_rdata
), q_type
);
6334 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n",
6335 fp
->index
, bp
, fp
->status_blk
.e2_sb
, fp
->cl_id
, fp
->fw_sb_id
,
6339 void bnx2x_nic_init_cnic(struct bnx2x
*bp
)
6342 bnx2x_init_fcoe_fp(bp
);
6344 bnx2x_init_sb(bp
, bp
->cnic_sb_mapping
,
6345 BNX2X_VF_ID_INVALID
, false,
6346 bnx2x_cnic_fw_sb_id(bp
), bnx2x_cnic_igu_sb_id(bp
));
6348 /* ensure status block indices were read */
6350 bnx2x_init_rx_rings_cnic(bp
);
6351 bnx2x_init_tx_rings_cnic(bp
);
6358 void bnx2x_pre_irq_nic_init(struct bnx2x
*bp
)
6362 /* Setup NIC internals and enable interrupts */
6363 for_each_eth_queue(bp
, i
)
6364 bnx2x_init_eth_fp(bp
, i
);
6366 /* ensure status block indices were read */
6368 bnx2x_init_rx_rings(bp
);
6369 bnx2x_init_tx_rings(bp
);
6372 /* Initialize MOD_ABS interrupts */
6373 bnx2x_init_mod_abs_int(bp
, &bp
->link_vars
, bp
->common
.chip_id
,
6374 bp
->common
.shmem_base
,
6375 bp
->common
.shmem2_base
, BP_PORT(bp
));
6377 /* initialize the default status block and sp ring */
6378 bnx2x_init_def_sb(bp
);
6379 bnx2x_update_dsb_idx(bp
);
6380 bnx2x_init_sp_ring(bp
);
6382 bnx2x_memset_stats(bp
);
6386 void bnx2x_post_irq_nic_init(struct bnx2x
*bp
, u32 load_code
)
6388 bnx2x_init_eq_ring(bp
);
6389 bnx2x_init_internal(bp
, load_code
);
6391 bnx2x_stats_init(bp
);
6393 /* flush all before enabling interrupts */
6397 bnx2x_int_enable(bp
);
6399 /* Check for SPIO5 */
6400 bnx2x_attn_int_deasserted0(bp
,
6401 REG_RD(bp
, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0
+ BP_PORT(bp
)*4) &
6402 AEU_INPUTS_ATTN_BITS_SPIO5
);
6405 /* gzip service functions */
6406 static int bnx2x_gunzip_init(struct bnx2x
*bp
)
6408 bp
->gunzip_buf
= dma_alloc_coherent(&bp
->pdev
->dev
, FW_BUF_SIZE
,
6409 &bp
->gunzip_mapping
, GFP_KERNEL
);
6410 if (bp
->gunzip_buf
== NULL
)
6413 bp
->strm
= kmalloc(sizeof(*bp
->strm
), GFP_KERNEL
);
6414 if (bp
->strm
== NULL
)
6417 bp
->strm
->workspace
= vmalloc(zlib_inflate_workspacesize());
6418 if (bp
->strm
->workspace
== NULL
)
6428 dma_free_coherent(&bp
->pdev
->dev
, FW_BUF_SIZE
, bp
->gunzip_buf
,
6429 bp
->gunzip_mapping
);
6430 bp
->gunzip_buf
= NULL
;
6433 BNX2X_ERR("Cannot allocate firmware buffer for un-compression\n");
6437 static void bnx2x_gunzip_end(struct bnx2x
*bp
)
6440 vfree(bp
->strm
->workspace
);
6445 if (bp
->gunzip_buf
) {
6446 dma_free_coherent(&bp
->pdev
->dev
, FW_BUF_SIZE
, bp
->gunzip_buf
,
6447 bp
->gunzip_mapping
);
6448 bp
->gunzip_buf
= NULL
;
6452 static int bnx2x_gunzip(struct bnx2x
*bp
, const u8
*zbuf
, int len
)
6456 /* check gzip header */
6457 if ((zbuf
[0] != 0x1f) || (zbuf
[1] != 0x8b) || (zbuf
[2] != Z_DEFLATED
)) {
6458 BNX2X_ERR("Bad gzip header\n");
6466 if (zbuf
[3] & FNAME
)
6467 while ((zbuf
[n
++] != 0) && (n
< len
));
6469 bp
->strm
->next_in
= (typeof(bp
->strm
->next_in
))zbuf
+ n
;
6470 bp
->strm
->avail_in
= len
- n
;
6471 bp
->strm
->next_out
= bp
->gunzip_buf
;
6472 bp
->strm
->avail_out
= FW_BUF_SIZE
;
6474 rc
= zlib_inflateInit2(bp
->strm
, -MAX_WBITS
);
6478 rc
= zlib_inflate(bp
->strm
, Z_FINISH
);
6479 if ((rc
!= Z_OK
) && (rc
!= Z_STREAM_END
))
6480 netdev_err(bp
->dev
, "Firmware decompression error: %s\n",
6483 bp
->gunzip_outlen
= (FW_BUF_SIZE
- bp
->strm
->avail_out
);
6484 if (bp
->gunzip_outlen
& 0x3)
6486 "Firmware decompression error: gunzip_outlen (%d) not aligned\n",
6488 bp
->gunzip_outlen
>>= 2;
6490 zlib_inflateEnd(bp
->strm
);
6492 if (rc
== Z_STREAM_END
)
6498 /* nic load/unload */
6501 * General service functions
6504 /* send a NIG loopback debug packet */
6505 static void bnx2x_lb_pckt(struct bnx2x
*bp
)
6509 /* Ethernet source and destination addresses */
6510 wb_write
[0] = 0x55555555;
6511 wb_write
[1] = 0x55555555;
6512 wb_write
[2] = 0x20; /* SOP */
6513 REG_WR_DMAE(bp
, NIG_REG_DEBUG_PACKET_LB
, wb_write
, 3);
6515 /* NON-IP protocol */
6516 wb_write
[0] = 0x09000000;
6517 wb_write
[1] = 0x55555555;
6518 wb_write
[2] = 0x10; /* EOP, eop_bvalid = 0 */
6519 REG_WR_DMAE(bp
, NIG_REG_DEBUG_PACKET_LB
, wb_write
, 3);
6522 /* some of the internal memories
6523 * are not directly readable from the driver
6524 * to test them we send debug packets
6526 static int bnx2x_int_mem_test(struct bnx2x
*bp
)
6532 if (CHIP_REV_IS_FPGA(bp
))
6534 else if (CHIP_REV_IS_EMUL(bp
))
6539 /* Disable inputs of parser neighbor blocks */
6540 REG_WR(bp
, TSDM_REG_ENABLE_IN1
, 0x0);
6541 REG_WR(bp
, TCM_REG_PRS_IFEN
, 0x0);
6542 REG_WR(bp
, CFC_REG_DEBUG0
, 0x1);
6543 REG_WR(bp
, NIG_REG_PRS_REQ_IN_EN
, 0x0);
6545 /* Write 0 to parser credits for CFC search request */
6546 REG_WR(bp
, PRS_REG_CFC_SEARCH_INITIAL_CREDIT
, 0x0);
6548 /* send Ethernet packet */
6551 /* TODO do i reset NIG statistic? */
6552 /* Wait until NIG register shows 1 packet of size 0x10 */
6553 count
= 1000 * factor
;
6556 bnx2x_read_dmae(bp
, NIG_REG_STAT2_BRB_OCTET
, 2);
6557 val
= *bnx2x_sp(bp
, wb_data
[0]);
6561 usleep_range(10000, 20000);
6565 BNX2X_ERR("NIG timeout val = 0x%x\n", val
);
6569 /* Wait until PRS register shows 1 packet */
6570 count
= 1000 * factor
;
6572 val
= REG_RD(bp
, PRS_REG_NUM_OF_PACKETS
);
6576 usleep_range(10000, 20000);
6580 BNX2X_ERR("PRS timeout val = 0x%x\n", val
);
6584 /* Reset and init BRB, PRS */
6585 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
, 0x03);
6587 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
, 0x03);
6589 bnx2x_init_block(bp
, BLOCK_BRB1
, PHASE_COMMON
);
6590 bnx2x_init_block(bp
, BLOCK_PRS
, PHASE_COMMON
);
6592 DP(NETIF_MSG_HW
, "part2\n");
6594 /* Disable inputs of parser neighbor blocks */
6595 REG_WR(bp
, TSDM_REG_ENABLE_IN1
, 0x0);
6596 REG_WR(bp
, TCM_REG_PRS_IFEN
, 0x0);
6597 REG_WR(bp
, CFC_REG_DEBUG0
, 0x1);
6598 REG_WR(bp
, NIG_REG_PRS_REQ_IN_EN
, 0x0);
6600 /* Write 0 to parser credits for CFC search request */
6601 REG_WR(bp
, PRS_REG_CFC_SEARCH_INITIAL_CREDIT
, 0x0);
6603 /* send 10 Ethernet packets */
6604 for (i
= 0; i
< 10; i
++)
6607 /* Wait until NIG register shows 10 + 1
6608 packets of size 11*0x10 = 0xb0 */
6609 count
= 1000 * factor
;
6612 bnx2x_read_dmae(bp
, NIG_REG_STAT2_BRB_OCTET
, 2);
6613 val
= *bnx2x_sp(bp
, wb_data
[0]);
6617 usleep_range(10000, 20000);
6621 BNX2X_ERR("NIG timeout val = 0x%x\n", val
);
6625 /* Wait until PRS register shows 2 packets */
6626 val
= REG_RD(bp
, PRS_REG_NUM_OF_PACKETS
);
6628 BNX2X_ERR("PRS timeout val = 0x%x\n", val
);
6630 /* Write 1 to parser credits for CFC search request */
6631 REG_WR(bp
, PRS_REG_CFC_SEARCH_INITIAL_CREDIT
, 0x1);
6633 /* Wait until PRS register shows 3 packets */
6634 msleep(10 * factor
);
6635 /* Wait until NIG register shows 1 packet of size 0x10 */
6636 val
= REG_RD(bp
, PRS_REG_NUM_OF_PACKETS
);
6638 BNX2X_ERR("PRS timeout val = 0x%x\n", val
);
6640 /* clear NIG EOP FIFO */
6641 for (i
= 0; i
< 11; i
++)
6642 REG_RD(bp
, NIG_REG_INGRESS_EOP_LB_FIFO
);
6643 val
= REG_RD(bp
, NIG_REG_INGRESS_EOP_LB_EMPTY
);
6645 BNX2X_ERR("clear of NIG failed\n");
6649 /* Reset and init BRB, PRS, NIG */
6650 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
, 0x03);
6652 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
, 0x03);
6654 bnx2x_init_block(bp
, BLOCK_BRB1
, PHASE_COMMON
);
6655 bnx2x_init_block(bp
, BLOCK_PRS
, PHASE_COMMON
);
6656 if (!CNIC_SUPPORT(bp
))
6658 REG_WR(bp
, PRS_REG_NIC_MODE
, 1);
6660 /* Enable inputs of parser neighbor blocks */
6661 REG_WR(bp
, TSDM_REG_ENABLE_IN1
, 0x7fffffff);
6662 REG_WR(bp
, TCM_REG_PRS_IFEN
, 0x1);
6663 REG_WR(bp
, CFC_REG_DEBUG0
, 0x0);
6664 REG_WR(bp
, NIG_REG_PRS_REQ_IN_EN
, 0x1);
6666 DP(NETIF_MSG_HW
, "done\n");
6671 static void bnx2x_enable_blocks_attention(struct bnx2x
*bp
)
6675 REG_WR(bp
, PXP_REG_PXP_INT_MASK_0
, 0);
6676 if (!CHIP_IS_E1x(bp
))
6677 REG_WR(bp
, PXP_REG_PXP_INT_MASK_1
, 0x40);
6679 REG_WR(bp
, PXP_REG_PXP_INT_MASK_1
, 0);
6680 REG_WR(bp
, DORQ_REG_DORQ_INT_MASK
, 0);
6681 REG_WR(bp
, CFC_REG_CFC_INT_MASK
, 0);
6683 * mask read length error interrupts in brb for parser
6684 * (parsing unit and 'checksum and crc' unit)
6685 * these errors are legal (PU reads fixed length and CAC can cause
6686 * read length error on truncated packets)
6688 REG_WR(bp
, BRB1_REG_BRB1_INT_MASK
, 0xFC00);
6689 REG_WR(bp
, QM_REG_QM_INT_MASK
, 0);
6690 REG_WR(bp
, TM_REG_TM_INT_MASK
, 0);
6691 REG_WR(bp
, XSDM_REG_XSDM_INT_MASK_0
, 0);
6692 REG_WR(bp
, XSDM_REG_XSDM_INT_MASK_1
, 0);
6693 REG_WR(bp
, XCM_REG_XCM_INT_MASK
, 0);
6694 /* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */
6695 /* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */
6696 REG_WR(bp
, USDM_REG_USDM_INT_MASK_0
, 0);
6697 REG_WR(bp
, USDM_REG_USDM_INT_MASK_1
, 0);
6698 REG_WR(bp
, UCM_REG_UCM_INT_MASK
, 0);
6699 /* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */
6700 /* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */
6701 REG_WR(bp
, GRCBASE_UPB
+ PB_REG_PB_INT_MASK
, 0);
6702 REG_WR(bp
, CSDM_REG_CSDM_INT_MASK_0
, 0);
6703 REG_WR(bp
, CSDM_REG_CSDM_INT_MASK_1
, 0);
6704 REG_WR(bp
, CCM_REG_CCM_INT_MASK
, 0);
6705 /* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */
6706 /* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */
6708 val
= PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT
|
6709 PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF
|
6710 PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN
;
6711 if (!CHIP_IS_E1x(bp
))
6712 val
|= PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED
|
6713 PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED
;
6714 REG_WR(bp
, PXP2_REG_PXP2_INT_MASK_0
, val
);
6716 REG_WR(bp
, TSDM_REG_TSDM_INT_MASK_0
, 0);
6717 REG_WR(bp
, TSDM_REG_TSDM_INT_MASK_1
, 0);
6718 REG_WR(bp
, TCM_REG_TCM_INT_MASK
, 0);
6719 /* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */
6721 if (!CHIP_IS_E1x(bp
))
6722 /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
6723 REG_WR(bp
, TSEM_REG_TSEM_INT_MASK_1
, 0x07ff);
6725 REG_WR(bp
, CDU_REG_CDU_INT_MASK
, 0);
6726 REG_WR(bp
, DMAE_REG_DMAE_INT_MASK
, 0);
6727 /* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
6728 REG_WR(bp
, PBF_REG_PBF_INT_MASK
, 0x18); /* bit 3,4 masked */
6731 static void bnx2x_reset_common(struct bnx2x
*bp
)
6736 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
,
6739 if (CHIP_IS_E3(bp
)) {
6740 val
|= MISC_REGISTERS_RESET_REG_2_MSTAT0
;
6741 val
|= MISC_REGISTERS_RESET_REG_2_MSTAT1
;
6744 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_2_CLEAR
, val
);
6747 static void bnx2x_setup_dmae(struct bnx2x
*bp
)
6750 spin_lock_init(&bp
->dmae_lock
);
6753 static void bnx2x_init_pxp(struct bnx2x
*bp
)
6756 int r_order
, w_order
;
6758 pcie_capability_read_word(bp
->pdev
, PCI_EXP_DEVCTL
, &devctl
);
6759 DP(NETIF_MSG_HW
, "read 0x%x from devctl\n", devctl
);
6760 w_order
= ((devctl
& PCI_EXP_DEVCTL_PAYLOAD
) >> 5);
6762 r_order
= ((devctl
& PCI_EXP_DEVCTL_READRQ
) >> 12);
6764 DP(NETIF_MSG_HW
, "force read order to %d\n", bp
->mrrs
);
6768 bnx2x_init_pxp_arb(bp
, r_order
, w_order
);
6771 static void bnx2x_setup_fan_failure_detection(struct bnx2x
*bp
)
6781 val
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.config2
) &
6782 SHARED_HW_CFG_FAN_FAILURE_MASK
;
6784 if (val
== SHARED_HW_CFG_FAN_FAILURE_ENABLED
)
6788 * The fan failure mechanism is usually related to the PHY type since
6789 * the power consumption of the board is affected by the PHY. Currently,
6790 * fan is required for most designs with SFX7101, BCM8727 and BCM8481.
6792 else if (val
== SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE
)
6793 for (port
= PORT_0
; port
< PORT_MAX
; port
++) {
6795 bnx2x_fan_failure_det_req(
6797 bp
->common
.shmem_base
,
6798 bp
->common
.shmem2_base
,
6802 DP(NETIF_MSG_HW
, "fan detection setting: %d\n", is_required
);
6804 if (is_required
== 0)
6807 /* Fan failure is indicated by SPIO 5 */
6808 bnx2x_set_spio(bp
, MISC_SPIO_SPIO5
, MISC_SPIO_INPUT_HI_Z
);
6810 /* set to active low mode */
6811 val
= REG_RD(bp
, MISC_REG_SPIO_INT
);
6812 val
|= (MISC_SPIO_SPIO5
<< MISC_SPIO_INT_OLD_SET_POS
);
6813 REG_WR(bp
, MISC_REG_SPIO_INT
, val
);
6815 /* enable interrupt to signal the IGU */
6816 val
= REG_RD(bp
, MISC_REG_SPIO_EVENT_EN
);
6817 val
|= MISC_SPIO_SPIO5
;
6818 REG_WR(bp
, MISC_REG_SPIO_EVENT_EN
, val
);
6821 void bnx2x_pf_disable(struct bnx2x
*bp
)
6823 u32 val
= REG_RD(bp
, IGU_REG_PF_CONFIGURATION
);
6824 val
&= ~IGU_PF_CONF_FUNC_EN
;
6826 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, val
);
6827 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 0);
6828 REG_WR(bp
, CFC_REG_WEAK_ENABLE_PF
, 0);
6831 static void bnx2x__common_init_phy(struct bnx2x
*bp
)
6833 u32 shmem_base
[2], shmem2_base
[2];
6834 /* Avoid common init in case MFW supports LFA */
6835 if (SHMEM2_RD(bp
, size
) >
6836 (u32
)offsetof(struct shmem2_region
, lfa_host_addr
[BP_PORT(bp
)]))
6838 shmem_base
[0] = bp
->common
.shmem_base
;
6839 shmem2_base
[0] = bp
->common
.shmem2_base
;
6840 if (!CHIP_IS_E1x(bp
)) {
6842 SHMEM2_RD(bp
, other_shmem_base_addr
);
6844 SHMEM2_RD(bp
, other_shmem2_base_addr
);
6846 bnx2x_acquire_phy_lock(bp
);
6847 bnx2x_common_init_phy(bp
, shmem_base
, shmem2_base
,
6848 bp
->common
.chip_id
);
6849 bnx2x_release_phy_lock(bp
);
6853 * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
6855 * @bp: driver handle
6857 static int bnx2x_init_hw_common(struct bnx2x
*bp
)
6861 DP(NETIF_MSG_HW
, "starting common init func %d\n", BP_ABS_FUNC(bp
));
6864 * take the RESET lock to protect undi_unload flow from accessing
6865 * registers while we're resetting the chip
6867 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RESET
);
6869 bnx2x_reset_common(bp
);
6870 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
, 0xffffffff);
6873 if (CHIP_IS_E3(bp
)) {
6874 val
|= MISC_REGISTERS_RESET_REG_2_MSTAT0
;
6875 val
|= MISC_REGISTERS_RESET_REG_2_MSTAT1
;
6877 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_2_SET
, val
);
6879 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RESET
);
6881 bnx2x_init_block(bp
, BLOCK_MISC
, PHASE_COMMON
);
6883 if (!CHIP_IS_E1x(bp
)) {
6887 * 4-port mode or 2-port mode we need to turn of master-enable
6888 * for everyone, after that, turn it back on for self.
6889 * so, we disregard multi-function or not, and always disable
6890 * for all functions on the given path, this means 0,2,4,6 for
6891 * path 0 and 1,3,5,7 for path 1
6893 for (abs_func_id
= BP_PATH(bp
);
6894 abs_func_id
< E2_FUNC_MAX
*2; abs_func_id
+= 2) {
6895 if (abs_func_id
== BP_ABS_FUNC(bp
)) {
6897 PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
,
6902 bnx2x_pretend_func(bp
, abs_func_id
);
6903 /* clear pf enable */
6904 bnx2x_pf_disable(bp
);
6905 bnx2x_pretend_func(bp
, BP_ABS_FUNC(bp
));
6909 bnx2x_init_block(bp
, BLOCK_PXP
, PHASE_COMMON
);
6910 if (CHIP_IS_E1(bp
)) {
6911 /* enable HW interrupt from PXP on USDM overflow
6912 bit 16 on INT_MASK_0 */
6913 REG_WR(bp
, PXP_REG_PXP_INT_MASK_0
, 0);
6916 bnx2x_init_block(bp
, BLOCK_PXP2
, PHASE_COMMON
);
6920 REG_WR(bp
, PXP2_REG_RQ_QM_ENDIAN_M
, 1);
6921 REG_WR(bp
, PXP2_REG_RQ_TM_ENDIAN_M
, 1);
6922 REG_WR(bp
, PXP2_REG_RQ_SRC_ENDIAN_M
, 1);
6923 REG_WR(bp
, PXP2_REG_RQ_CDU_ENDIAN_M
, 1);
6924 REG_WR(bp
, PXP2_REG_RQ_DBG_ENDIAN_M
, 1);
6925 /* make sure this value is 0 */
6926 REG_WR(bp
, PXP2_REG_RQ_HC_ENDIAN_M
, 0);
6928 /* REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */
6929 REG_WR(bp
, PXP2_REG_RD_QM_SWAP_MODE
, 1);
6930 REG_WR(bp
, PXP2_REG_RD_TM_SWAP_MODE
, 1);
6931 REG_WR(bp
, PXP2_REG_RD_SRC_SWAP_MODE
, 1);
6932 REG_WR(bp
, PXP2_REG_RD_CDURD_SWAP_MODE
, 1);
6935 bnx2x_ilt_init_page_size(bp
, INITOP_SET
);
6937 if (CHIP_REV_IS_FPGA(bp
) && CHIP_IS_E1H(bp
))
6938 REG_WR(bp
, PXP2_REG_PGL_TAGS_LIMIT
, 0x1);
6940 /* let the HW do it's magic ... */
6942 /* finish PXP init */
6943 val
= REG_RD(bp
, PXP2_REG_RQ_CFG_DONE
);
6945 BNX2X_ERR("PXP2 CFG failed\n");
6948 val
= REG_RD(bp
, PXP2_REG_RD_INIT_DONE
);
6950 BNX2X_ERR("PXP2 RD_INIT failed\n");
6954 /* Timers bug workaround E2 only. We need to set the entire ILT to
6955 * have entries with value "0" and valid bit on.
6956 * This needs to be done by the first PF that is loaded in a path
6957 * (i.e. common phase)
6959 if (!CHIP_IS_E1x(bp
)) {
6960 /* In E2 there is a bug in the timers block that can cause function 6 / 7
6961 * (i.e. vnic3) to start even if it is marked as "scan-off".
6962 * This occurs when a different function (func2,3) is being marked
6963 * as "scan-off". Real-life scenario for example: if a driver is being
6964 * load-unloaded while func6,7 are down. This will cause the timer to access
6965 * the ilt, translate to a logical address and send a request to read/write.
6966 * Since the ilt for the function that is down is not valid, this will cause
6967 * a translation error which is unrecoverable.
6968 * The Workaround is intended to make sure that when this happens nothing fatal
6969 * will occur. The workaround:
6970 * 1. First PF driver which loads on a path will:
6971 * a. After taking the chip out of reset, by using pretend,
6972 * it will write "0" to the following registers of
6974 * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
6975 * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
6976 * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
6977 * And for itself it will write '1' to
6978 * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
6979 * dmae-operations (writing to pram for example.)
6980 * note: can be done for only function 6,7 but cleaner this
6982 * b. Write zero+valid to the entire ILT.
6983 * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of
6984 * VNIC3 (of that port). The range allocated will be the
6985 * entire ILT. This is needed to prevent ILT range error.
6986 * 2. Any PF driver load flow:
6987 * a. ILT update with the physical addresses of the allocated
6989 * b. Wait 20msec. - note that this timeout is needed to make
6990 * sure there are no requests in one of the PXP internal
6991 * queues with "old" ILT addresses.
6992 * c. PF enable in the PGLC.
6993 * d. Clear the was_error of the PF in the PGLC. (could have
6994 * occurred while driver was down)
6995 * e. PF enable in the CFC (WEAK + STRONG)
6996 * f. Timers scan enable
6997 * 3. PF driver unload flow:
6998 * a. Clear the Timers scan_en.
6999 * b. Polling for scan_on=0 for that PF.
7000 * c. Clear the PF enable bit in the PXP.
7001 * d. Clear the PF enable in the CFC (WEAK + STRONG)
7002 * e. Write zero+valid to all ILT entries (The valid bit must
7004 * f. If this is VNIC 3 of a port then also init
7005 * first_timers_ilt_entry to zero and last_timers_ilt_entry
7006 * to the last entry in the ILT.
7009 * Currently the PF error in the PGLC is non recoverable.
7010 * In the future the there will be a recovery routine for this error.
7011 * Currently attention is masked.
7012 * Having an MCP lock on the load/unload process does not guarantee that
7013 * there is no Timer disable during Func6/7 enable. This is because the
7014 * Timers scan is currently being cleared by the MCP on FLR.
7015 * Step 2.d can be done only for PF6/7 and the driver can also check if
7016 * there is error before clearing it. But the flow above is simpler and
7018 * All ILT entries are written by zero+valid and not just PF6/7
7019 * ILT entries since in the future the ILT entries allocation for
7020 * PF-s might be dynamic.
7022 struct ilt_client_info ilt_cli
;
7023 struct bnx2x_ilt ilt
;
7024 memset(&ilt_cli
, 0, sizeof(struct ilt_client_info
));
7025 memset(&ilt
, 0, sizeof(struct bnx2x_ilt
));
7027 /* initialize dummy TM client */
7029 ilt_cli
.end
= ILT_NUM_PAGE_ENTRIES
- 1;
7030 ilt_cli
.client_num
= ILT_CLIENT_TM
;
7032 /* Step 1: set zeroes to all ilt page entries with valid bit on
7033 * Step 2: set the timers first/last ilt entry to point
7034 * to the entire range to prevent ILT range error for 3rd/4th
7035 * vnic (this code assumes existence of the vnic)
7037 * both steps performed by call to bnx2x_ilt_client_init_op()
7038 * with dummy TM client
7040 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
7041 * and his brother are split registers
7043 bnx2x_pretend_func(bp
, (BP_PATH(bp
) + 6));
7044 bnx2x_ilt_client_init_op_ilt(bp
, &ilt
, &ilt_cli
, INITOP_CLEAR
);
7045 bnx2x_pretend_func(bp
, BP_ABS_FUNC(bp
));
7047 REG_WR(bp
, PXP2_REG_RQ_DRAM_ALIGN
, BNX2X_PXP_DRAM_ALIGN
);
7048 REG_WR(bp
, PXP2_REG_RQ_DRAM_ALIGN_RD
, BNX2X_PXP_DRAM_ALIGN
);
7049 REG_WR(bp
, PXP2_REG_RQ_DRAM_ALIGN_SEL
, 1);
7052 REG_WR(bp
, PXP2_REG_RQ_DISABLE_INPUTS
, 0);
7053 REG_WR(bp
, PXP2_REG_RD_DISABLE_INPUTS
, 0);
7055 if (!CHIP_IS_E1x(bp
)) {
7056 int factor
= CHIP_REV_IS_EMUL(bp
) ? 1000 :
7057 (CHIP_REV_IS_FPGA(bp
) ? 400 : 0);
7058 bnx2x_init_block(bp
, BLOCK_PGLUE_B
, PHASE_COMMON
);
7060 bnx2x_init_block(bp
, BLOCK_ATC
, PHASE_COMMON
);
7062 /* let the HW do it's magic ... */
7065 val
= REG_RD(bp
, ATC_REG_ATC_INIT_DONE
);
7066 } while (factor
-- && (val
!= 1));
7069 BNX2X_ERR("ATC_INIT failed\n");
7074 bnx2x_init_block(bp
, BLOCK_DMAE
, PHASE_COMMON
);
7076 bnx2x_iov_init_dmae(bp
);
7078 /* clean the DMAE memory */
7080 bnx2x_init_fill(bp
, TSEM_REG_PRAM
, 0, 8, 1);
7082 bnx2x_init_block(bp
, BLOCK_TCM
, PHASE_COMMON
);
7084 bnx2x_init_block(bp
, BLOCK_UCM
, PHASE_COMMON
);
7086 bnx2x_init_block(bp
, BLOCK_CCM
, PHASE_COMMON
);
7088 bnx2x_init_block(bp
, BLOCK_XCM
, PHASE_COMMON
);
7090 bnx2x_read_dmae(bp
, XSEM_REG_PASSIVE_BUFFER
, 3);
7091 bnx2x_read_dmae(bp
, CSEM_REG_PASSIVE_BUFFER
, 3);
7092 bnx2x_read_dmae(bp
, TSEM_REG_PASSIVE_BUFFER
, 3);
7093 bnx2x_read_dmae(bp
, USEM_REG_PASSIVE_BUFFER
, 3);
7095 bnx2x_init_block(bp
, BLOCK_QM
, PHASE_COMMON
);
7097 /* QM queues pointers table */
7098 bnx2x_qm_init_ptr_table(bp
, bp
->qm_cid_count
, INITOP_SET
);
7100 /* soft reset pulse */
7101 REG_WR(bp
, QM_REG_SOFT_RESET
, 1);
7102 REG_WR(bp
, QM_REG_SOFT_RESET
, 0);
7104 if (CNIC_SUPPORT(bp
))
7105 bnx2x_init_block(bp
, BLOCK_TM
, PHASE_COMMON
);
7107 bnx2x_init_block(bp
, BLOCK_DORQ
, PHASE_COMMON
);
7109 if (!CHIP_REV_IS_SLOW(bp
))
7110 /* enable hw interrupt from doorbell Q */
7111 REG_WR(bp
, DORQ_REG_DORQ_INT_MASK
, 0);
7113 bnx2x_init_block(bp
, BLOCK_BRB1
, PHASE_COMMON
);
7115 bnx2x_init_block(bp
, BLOCK_PRS
, PHASE_COMMON
);
7116 REG_WR(bp
, PRS_REG_A_PRSU_20
, 0xf);
7118 if (!CHIP_IS_E1(bp
))
7119 REG_WR(bp
, PRS_REG_E1HOV_MODE
, bp
->path_has_ovlan
);
7121 if (!CHIP_IS_E1x(bp
) && !CHIP_IS_E3B0(bp
)) {
7122 if (IS_MF_AFEX(bp
)) {
7123 /* configure that VNTag and VLAN headers must be
7124 * received in afex mode
7126 REG_WR(bp
, PRS_REG_HDRS_AFTER_BASIC
, 0xE);
7127 REG_WR(bp
, PRS_REG_MUST_HAVE_HDRS
, 0xA);
7128 REG_WR(bp
, PRS_REG_HDRS_AFTER_TAG_0
, 0x6);
7129 REG_WR(bp
, PRS_REG_TAG_ETHERTYPE_0
, 0x8926);
7130 REG_WR(bp
, PRS_REG_TAG_LEN_0
, 0x4);
7132 /* Bit-map indicating which L2 hdrs may appear
7133 * after the basic Ethernet header
7135 REG_WR(bp
, PRS_REG_HDRS_AFTER_BASIC
,
7136 bp
->path_has_ovlan
? 7 : 6);
7140 bnx2x_init_block(bp
, BLOCK_TSDM
, PHASE_COMMON
);
7141 bnx2x_init_block(bp
, BLOCK_CSDM
, PHASE_COMMON
);
7142 bnx2x_init_block(bp
, BLOCK_USDM
, PHASE_COMMON
);
7143 bnx2x_init_block(bp
, BLOCK_XSDM
, PHASE_COMMON
);
7145 if (!CHIP_IS_E1x(bp
)) {
7146 /* reset VFC memories */
7147 REG_WR(bp
, TSEM_REG_FAST_MEMORY
+ VFC_REG_MEMORIES_RST
,
7148 VFC_MEMORIES_RST_REG_CAM_RST
|
7149 VFC_MEMORIES_RST_REG_RAM_RST
);
7150 REG_WR(bp
, XSEM_REG_FAST_MEMORY
+ VFC_REG_MEMORIES_RST
,
7151 VFC_MEMORIES_RST_REG_CAM_RST
|
7152 VFC_MEMORIES_RST_REG_RAM_RST
);
7157 bnx2x_init_block(bp
, BLOCK_TSEM
, PHASE_COMMON
);
7158 bnx2x_init_block(bp
, BLOCK_USEM
, PHASE_COMMON
);
7159 bnx2x_init_block(bp
, BLOCK_CSEM
, PHASE_COMMON
);
7160 bnx2x_init_block(bp
, BLOCK_XSEM
, PHASE_COMMON
);
7163 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
,
7165 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
,
7168 bnx2x_init_block(bp
, BLOCK_UPB
, PHASE_COMMON
);
7169 bnx2x_init_block(bp
, BLOCK_XPB
, PHASE_COMMON
);
7170 bnx2x_init_block(bp
, BLOCK_PBF
, PHASE_COMMON
);
7172 if (!CHIP_IS_E1x(bp
)) {
7173 if (IS_MF_AFEX(bp
)) {
7174 /* configure that VNTag and VLAN headers must be
7177 REG_WR(bp
, PBF_REG_HDRS_AFTER_BASIC
, 0xE);
7178 REG_WR(bp
, PBF_REG_MUST_HAVE_HDRS
, 0xA);
7179 REG_WR(bp
, PBF_REG_HDRS_AFTER_TAG_0
, 0x6);
7180 REG_WR(bp
, PBF_REG_TAG_ETHERTYPE_0
, 0x8926);
7181 REG_WR(bp
, PBF_REG_TAG_LEN_0
, 0x4);
7183 REG_WR(bp
, PBF_REG_HDRS_AFTER_BASIC
,
7184 bp
->path_has_ovlan
? 7 : 6);
7188 REG_WR(bp
, SRC_REG_SOFT_RST
, 1);
7190 bnx2x_init_block(bp
, BLOCK_SRC
, PHASE_COMMON
);
7192 if (CNIC_SUPPORT(bp
)) {
7193 REG_WR(bp
, SRC_REG_KEYSEARCH_0
, 0x63285672);
7194 REG_WR(bp
, SRC_REG_KEYSEARCH_1
, 0x24b8f2cc);
7195 REG_WR(bp
, SRC_REG_KEYSEARCH_2
, 0x223aef9b);
7196 REG_WR(bp
, SRC_REG_KEYSEARCH_3
, 0x26001e3a);
7197 REG_WR(bp
, SRC_REG_KEYSEARCH_4
, 0x7ae91116);
7198 REG_WR(bp
, SRC_REG_KEYSEARCH_5
, 0x5ce5230b);
7199 REG_WR(bp
, SRC_REG_KEYSEARCH_6
, 0x298d8adf);
7200 REG_WR(bp
, SRC_REG_KEYSEARCH_7
, 0x6eb0ff09);
7201 REG_WR(bp
, SRC_REG_KEYSEARCH_8
, 0x1830f82f);
7202 REG_WR(bp
, SRC_REG_KEYSEARCH_9
, 0x01e46be7);
7204 REG_WR(bp
, SRC_REG_SOFT_RST
, 0);
7206 if (sizeof(union cdu_context
) != 1024)
7207 /* we currently assume that a context is 1024 bytes */
7208 dev_alert(&bp
->pdev
->dev
,
7209 "please adjust the size of cdu_context(%ld)\n",
7210 (long)sizeof(union cdu_context
));
7212 bnx2x_init_block(bp
, BLOCK_CDU
, PHASE_COMMON
);
7213 val
= (4 << 24) + (0 << 12) + 1024;
7214 REG_WR(bp
, CDU_REG_CDU_GLOBAL_PARAMS
, val
);
7216 bnx2x_init_block(bp
, BLOCK_CFC
, PHASE_COMMON
);
7217 REG_WR(bp
, CFC_REG_INIT_REG
, 0x7FF);
7218 /* enable context validation interrupt from CFC */
7219 REG_WR(bp
, CFC_REG_CFC_INT_MASK
, 0);
7221 /* set the thresholds to prevent CFC/CDU race */
7222 REG_WR(bp
, CFC_REG_DEBUG0
, 0x20020000);
7224 bnx2x_init_block(bp
, BLOCK_HC
, PHASE_COMMON
);
7226 if (!CHIP_IS_E1x(bp
) && BP_NOMCP(bp
))
7227 REG_WR(bp
, IGU_REG_RESET_MEMORIES
, 0x36);
7229 bnx2x_init_block(bp
, BLOCK_IGU
, PHASE_COMMON
);
7230 bnx2x_init_block(bp
, BLOCK_MISC_AEU
, PHASE_COMMON
);
7232 /* Reset PCIE errors for debug */
7233 REG_WR(bp
, 0x2814, 0xffffffff);
7234 REG_WR(bp
, 0x3820, 0xffffffff);
7236 if (!CHIP_IS_E1x(bp
)) {
7237 REG_WR(bp
, PCICFG_OFFSET
+ PXPCS_TL_CONTROL_5
,
7238 (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1
|
7239 PXPCS_TL_CONTROL_5_ERR_UNSPPORT
));
7240 REG_WR(bp
, PCICFG_OFFSET
+ PXPCS_TL_FUNC345_STAT
,
7241 (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4
|
7242 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3
|
7243 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2
));
7244 REG_WR(bp
, PCICFG_OFFSET
+ PXPCS_TL_FUNC678_STAT
,
7245 (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7
|
7246 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6
|
7247 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5
));
7250 bnx2x_init_block(bp
, BLOCK_NIG
, PHASE_COMMON
);
7251 if (!CHIP_IS_E1(bp
)) {
7252 /* in E3 this done in per-port section */
7253 if (!CHIP_IS_E3(bp
))
7254 REG_WR(bp
, NIG_REG_LLH_MF_MODE
, IS_MF(bp
));
7256 if (CHIP_IS_E1H(bp
))
7257 /* not applicable for E2 (and above ...) */
7258 REG_WR(bp
, NIG_REG_LLH_E1HOV_MODE
, IS_MF_SD(bp
));
7260 if (CHIP_REV_IS_SLOW(bp
))
7263 /* finish CFC init */
7264 val
= reg_poll(bp
, CFC_REG_LL_INIT_DONE
, 1, 100, 10);
7266 BNX2X_ERR("CFC LL_INIT failed\n");
7269 val
= reg_poll(bp
, CFC_REG_AC_INIT_DONE
, 1, 100, 10);
7271 BNX2X_ERR("CFC AC_INIT failed\n");
7274 val
= reg_poll(bp
, CFC_REG_CAM_INIT_DONE
, 1, 100, 10);
7276 BNX2X_ERR("CFC CAM_INIT failed\n");
7279 REG_WR(bp
, CFC_REG_DEBUG0
, 0);
7281 if (CHIP_IS_E1(bp
)) {
7282 /* read NIG statistic
7283 to see if this is our first up since powerup */
7284 bnx2x_read_dmae(bp
, NIG_REG_STAT2_BRB_OCTET
, 2);
7285 val
= *bnx2x_sp(bp
, wb_data
[0]);
7287 /* do internal memory self test */
7288 if ((val
== 0) && bnx2x_int_mem_test(bp
)) {
7289 BNX2X_ERR("internal mem self test failed\n");
7294 bnx2x_setup_fan_failure_detection(bp
);
7296 /* clear PXP2 attentions */
7297 REG_RD(bp
, PXP2_REG_PXP2_INT_STS_CLR_0
);
7299 bnx2x_enable_blocks_attention(bp
);
7300 bnx2x_enable_blocks_parity(bp
);
7302 if (!BP_NOMCP(bp
)) {
7303 if (CHIP_IS_E1x(bp
))
7304 bnx2x__common_init_phy(bp
);
7306 BNX2X_ERR("Bootcode is missing - can not initialize link\n");
7312 * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
7314 * @bp: driver handle
7316 static int bnx2x_init_hw_common_chip(struct bnx2x
*bp
)
7318 int rc
= bnx2x_init_hw_common(bp
);
7323 /* In E2 2-PORT mode, same ext phy is used for the two paths */
7325 bnx2x__common_init_phy(bp
);
7330 static int bnx2x_init_hw_port(struct bnx2x
*bp
)
7332 int port
= BP_PORT(bp
);
7333 int init_phase
= port
? PHASE_PORT1
: PHASE_PORT0
;
7337 DP(NETIF_MSG_HW
, "starting port init port %d\n", port
);
7339 REG_WR(bp
, NIG_REG_MASK_INTERRUPT_PORT0
+ port
*4, 0);
7341 bnx2x_init_block(bp
, BLOCK_MISC
, init_phase
);
7342 bnx2x_init_block(bp
, BLOCK_PXP
, init_phase
);
7343 bnx2x_init_block(bp
, BLOCK_PXP2
, init_phase
);
7345 /* Timers bug workaround: disables the pf_master bit in pglue at
7346 * common phase, we need to enable it here before any dmae access are
7347 * attempted. Therefore we manually added the enable-master to the
7348 * port phase (it also happens in the function phase)
7350 if (!CHIP_IS_E1x(bp
))
7351 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 1);
7353 bnx2x_init_block(bp
, BLOCK_ATC
, init_phase
);
7354 bnx2x_init_block(bp
, BLOCK_DMAE
, init_phase
);
7355 bnx2x_init_block(bp
, BLOCK_PGLUE_B
, init_phase
);
7356 bnx2x_init_block(bp
, BLOCK_QM
, init_phase
);
7358 bnx2x_init_block(bp
, BLOCK_TCM
, init_phase
);
7359 bnx2x_init_block(bp
, BLOCK_UCM
, init_phase
);
7360 bnx2x_init_block(bp
, BLOCK_CCM
, init_phase
);
7361 bnx2x_init_block(bp
, BLOCK_XCM
, init_phase
);
7363 /* QM cid (connection) count */
7364 bnx2x_qm_init_cid_count(bp
, bp
->qm_cid_count
, INITOP_SET
);
7366 if (CNIC_SUPPORT(bp
)) {
7367 bnx2x_init_block(bp
, BLOCK_TM
, init_phase
);
7368 REG_WR(bp
, TM_REG_LIN0_SCAN_TIME
+ port
*4, 20);
7369 REG_WR(bp
, TM_REG_LIN0_MAX_ACTIVE_CID
+ port
*4, 31);
7372 bnx2x_init_block(bp
, BLOCK_DORQ
, init_phase
);
7374 bnx2x_init_block(bp
, BLOCK_BRB1
, init_phase
);
7376 if (CHIP_IS_E1(bp
) || CHIP_IS_E1H(bp
)) {
7379 low
= ((bp
->flags
& ONE_PORT_FLAG
) ? 160 : 246);
7380 else if (bp
->dev
->mtu
> 4096) {
7381 if (bp
->flags
& ONE_PORT_FLAG
)
7385 /* (24*1024 + val*4)/256 */
7386 low
= 96 + (val
/64) +
7387 ((val
% 64) ? 1 : 0);
7390 low
= ((bp
->flags
& ONE_PORT_FLAG
) ? 80 : 160);
7391 high
= low
+ 56; /* 14*1024/256 */
7392 REG_WR(bp
, BRB1_REG_PAUSE_LOW_THRESHOLD_0
+ port
*4, low
);
7393 REG_WR(bp
, BRB1_REG_PAUSE_HIGH_THRESHOLD_0
+ port
*4, high
);
7396 if (CHIP_MODE_IS_4_PORT(bp
))
7397 REG_WR(bp
, (BP_PORT(bp
) ?
7398 BRB1_REG_MAC_GUARANTIED_1
:
7399 BRB1_REG_MAC_GUARANTIED_0
), 40);
7401 bnx2x_init_block(bp
, BLOCK_PRS
, init_phase
);
7402 if (CHIP_IS_E3B0(bp
)) {
7403 if (IS_MF_AFEX(bp
)) {
7404 /* configure headers for AFEX mode */
7405 REG_WR(bp
, BP_PORT(bp
) ?
7406 PRS_REG_HDRS_AFTER_BASIC_PORT_1
:
7407 PRS_REG_HDRS_AFTER_BASIC_PORT_0
, 0xE);
7408 REG_WR(bp
, BP_PORT(bp
) ?
7409 PRS_REG_HDRS_AFTER_TAG_0_PORT_1
:
7410 PRS_REG_HDRS_AFTER_TAG_0_PORT_0
, 0x6);
7411 REG_WR(bp
, BP_PORT(bp
) ?
7412 PRS_REG_MUST_HAVE_HDRS_PORT_1
:
7413 PRS_REG_MUST_HAVE_HDRS_PORT_0
, 0xA);
7415 /* Ovlan exists only if we are in multi-function +
7416 * switch-dependent mode, in switch-independent there
7417 * is no ovlan headers
7419 REG_WR(bp
, BP_PORT(bp
) ?
7420 PRS_REG_HDRS_AFTER_BASIC_PORT_1
:
7421 PRS_REG_HDRS_AFTER_BASIC_PORT_0
,
7422 (bp
->path_has_ovlan
? 7 : 6));
7426 bnx2x_init_block(bp
, BLOCK_TSDM
, init_phase
);
7427 bnx2x_init_block(bp
, BLOCK_CSDM
, init_phase
);
7428 bnx2x_init_block(bp
, BLOCK_USDM
, init_phase
);
7429 bnx2x_init_block(bp
, BLOCK_XSDM
, init_phase
);
7431 bnx2x_init_block(bp
, BLOCK_TSEM
, init_phase
);
7432 bnx2x_init_block(bp
, BLOCK_USEM
, init_phase
);
7433 bnx2x_init_block(bp
, BLOCK_CSEM
, init_phase
);
7434 bnx2x_init_block(bp
, BLOCK_XSEM
, init_phase
);
7436 bnx2x_init_block(bp
, BLOCK_UPB
, init_phase
);
7437 bnx2x_init_block(bp
, BLOCK_XPB
, init_phase
);
7439 bnx2x_init_block(bp
, BLOCK_PBF
, init_phase
);
7441 if (CHIP_IS_E1x(bp
)) {
7442 /* configure PBF to work without PAUSE mtu 9000 */
7443 REG_WR(bp
, PBF_REG_P0_PAUSE_ENABLE
+ port
*4, 0);
7445 /* update threshold */
7446 REG_WR(bp
, PBF_REG_P0_ARB_THRSH
+ port
*4, (9040/16));
7447 /* update init credit */
7448 REG_WR(bp
, PBF_REG_P0_INIT_CRD
+ port
*4, (9040/16) + 553 - 22);
7451 REG_WR(bp
, PBF_REG_INIT_P0
+ port
*4, 1);
7453 REG_WR(bp
, PBF_REG_INIT_P0
+ port
*4, 0);
7456 if (CNIC_SUPPORT(bp
))
7457 bnx2x_init_block(bp
, BLOCK_SRC
, init_phase
);
7459 bnx2x_init_block(bp
, BLOCK_CDU
, init_phase
);
7460 bnx2x_init_block(bp
, BLOCK_CFC
, init_phase
);
7462 if (CHIP_IS_E1(bp
)) {
7463 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, 0);
7464 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, 0);
7466 bnx2x_init_block(bp
, BLOCK_HC
, init_phase
);
7468 bnx2x_init_block(bp
, BLOCK_IGU
, init_phase
);
7470 bnx2x_init_block(bp
, BLOCK_MISC_AEU
, init_phase
);
7471 /* init aeu_mask_attn_func_0/1:
7472 * - SF mode: bits 3-7 are masked. Only bits 0-2 are in use
7473 * - MF mode: bit 3 is masked. Bits 0-2 are in use as in SF
7474 * bits 4-7 are used for "per vn group attention" */
7475 val
= IS_MF(bp
) ? 0xF7 : 0x7;
7476 /* Enable DCBX attention for all but E1 */
7477 val
|= CHIP_IS_E1(bp
) ? 0 : 0x10;
7478 REG_WR(bp
, MISC_REG_AEU_MASK_ATTN_FUNC_0
+ port
*4, val
);
7480 /* SCPAD_PARITY should NOT trigger close the gates */
7481 reg
= port
? MISC_REG_AEU_ENABLE4_NIG_1
: MISC_REG_AEU_ENABLE4_NIG_0
;
7484 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY
);
7486 reg
= port
? MISC_REG_AEU_ENABLE4_PXP_1
: MISC_REG_AEU_ENABLE4_PXP_0
;
7489 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY
);
7491 bnx2x_init_block(bp
, BLOCK_NIG
, init_phase
);
7493 if (!CHIP_IS_E1x(bp
)) {
7494 /* Bit-map indicating which L2 hdrs may appear after the
7495 * basic Ethernet header
7498 REG_WR(bp
, BP_PORT(bp
) ?
7499 NIG_REG_P1_HDRS_AFTER_BASIC
:
7500 NIG_REG_P0_HDRS_AFTER_BASIC
, 0xE);
7502 REG_WR(bp
, BP_PORT(bp
) ?
7503 NIG_REG_P1_HDRS_AFTER_BASIC
:
7504 NIG_REG_P0_HDRS_AFTER_BASIC
,
7505 IS_MF_SD(bp
) ? 7 : 6);
7508 REG_WR(bp
, BP_PORT(bp
) ?
7509 NIG_REG_LLH1_MF_MODE
:
7510 NIG_REG_LLH_MF_MODE
, IS_MF(bp
));
7512 if (!CHIP_IS_E3(bp
))
7513 REG_WR(bp
, NIG_REG_XGXS_SERDES0_MODE_SEL
+ port
*4, 1);
7515 if (!CHIP_IS_E1(bp
)) {
7516 /* 0x2 disable mf_ov, 0x1 enable */
7517 REG_WR(bp
, NIG_REG_LLH0_BRB1_DRV_MASK_MF
+ port
*4,
7518 (IS_MF_SD(bp
) ? 0x1 : 0x2));
7520 if (!CHIP_IS_E1x(bp
)) {
7522 switch (bp
->mf_mode
) {
7523 case MULTI_FUNCTION_SD
:
7526 case MULTI_FUNCTION_SI
:
7527 case MULTI_FUNCTION_AFEX
:
7532 REG_WR(bp
, (BP_PORT(bp
) ? NIG_REG_LLH1_CLS_TYPE
:
7533 NIG_REG_LLH0_CLS_TYPE
), val
);
7536 REG_WR(bp
, NIG_REG_LLFC_ENABLE_0
+ port
*4, 0);
7537 REG_WR(bp
, NIG_REG_LLFC_OUT_EN_0
+ port
*4, 0);
7538 REG_WR(bp
, NIG_REG_PAUSE_ENABLE_0
+ port
*4, 1);
7542 /* If SPIO5 is set to generate interrupts, enable it for this port */
7543 val
= REG_RD(bp
, MISC_REG_SPIO_EVENT_EN
);
7544 if (val
& MISC_SPIO_SPIO5
) {
7545 u32 reg_addr
= (port
? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0
:
7546 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0
);
7547 val
= REG_RD(bp
, reg_addr
);
7548 val
|= AEU_INPUTS_ATTN_BITS_SPIO5
;
7549 REG_WR(bp
, reg_addr
, val
);
7555 static void bnx2x_ilt_wr(struct bnx2x
*bp
, u32 index
, dma_addr_t addr
)
7561 reg
= PXP2_REG_RQ_ONCHIP_AT
+ index
*8;
7563 reg
= PXP2_REG_RQ_ONCHIP_AT_B0
+ index
*8;
7565 wb_write
[0] = ONCHIP_ADDR1(addr
);
7566 wb_write
[1] = ONCHIP_ADDR2(addr
);
7567 REG_WR_DMAE(bp
, reg
, wb_write
, 2);
7570 void bnx2x_igu_clear_sb_gen(struct bnx2x
*bp
, u8 func
, u8 idu_sb_id
, bool is_pf
)
7572 u32 data
, ctl
, cnt
= 100;
7573 u32 igu_addr_data
= IGU_REG_COMMAND_REG_32LSB_DATA
;
7574 u32 igu_addr_ctl
= IGU_REG_COMMAND_REG_CTRL
;
7575 u32 igu_addr_ack
= IGU_REG_CSTORM_TYPE_0_SB_CLEANUP
+ (idu_sb_id
/32)*4;
7576 u32 sb_bit
= 1 << (idu_sb_id
%32);
7577 u32 func_encode
= func
| (is_pf
? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT
;
7578 u32 addr_encode
= IGU_CMD_E2_PROD_UPD_BASE
+ idu_sb_id
;
7580 /* Not supported in BC mode */
7581 if (CHIP_INT_MODE_IS_BC(bp
))
7584 data
= (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup
7585 << IGU_REGULAR_CLEANUP_TYPE_SHIFT
) |
7586 IGU_REGULAR_CLEANUP_SET
|
7587 IGU_REGULAR_BCLEANUP
;
7589 ctl
= addr_encode
<< IGU_CTRL_REG_ADDRESS_SHIFT
|
7590 func_encode
<< IGU_CTRL_REG_FID_SHIFT
|
7591 IGU_CTRL_CMD_TYPE_WR
<< IGU_CTRL_REG_TYPE_SHIFT
;
7593 DP(NETIF_MSG_HW
, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
7594 data
, igu_addr_data
);
7595 REG_WR(bp
, igu_addr_data
, data
);
7598 DP(NETIF_MSG_HW
, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
7600 REG_WR(bp
, igu_addr_ctl
, ctl
);
7604 /* wait for clean up to finish */
7605 while (!(REG_RD(bp
, igu_addr_ack
) & sb_bit
) && --cnt
)
7608 if (!(REG_RD(bp
, igu_addr_ack
) & sb_bit
)) {
7610 "Unable to finish IGU cleanup: idu_sb_id %d offset %d bit %d (cnt %d)\n",
7611 idu_sb_id
, idu_sb_id
/32, idu_sb_id
%32, cnt
);
7615 static void bnx2x_igu_clear_sb(struct bnx2x
*bp
, u8 idu_sb_id
)
7617 bnx2x_igu_clear_sb_gen(bp
, BP_FUNC(bp
), idu_sb_id
, true /*PF*/);
7620 static void bnx2x_clear_func_ilt(struct bnx2x
*bp
, u32 func
)
7622 u32 i
, base
= FUNC_ILT_BASE(func
);
7623 for (i
= base
; i
< base
+ ILT_PER_FUNC
; i
++)
7624 bnx2x_ilt_wr(bp
, i
, 0);
7627 static void bnx2x_init_searcher(struct bnx2x
*bp
)
7629 int port
= BP_PORT(bp
);
7630 bnx2x_src_init_t2(bp
, bp
->t2
, bp
->t2_mapping
, SRC_CONN_NUM
);
7631 /* T1 hash bits value determines the T1 number of entries */
7632 REG_WR(bp
, SRC_REG_NUMBER_HASH_BITS0
+ port
*4, SRC_HASH_BITS
);
7635 static inline int bnx2x_func_switch_update(struct bnx2x
*bp
, int suspend
)
7638 struct bnx2x_func_state_params func_params
= {NULL
};
7639 struct bnx2x_func_switch_update_params
*switch_update_params
=
7640 &func_params
.params
.switch_update
;
7642 /* Prepare parameters for function state transitions */
7643 __set_bit(RAMROD_COMP_WAIT
, &func_params
.ramrod_flags
);
7644 __set_bit(RAMROD_RETRY
, &func_params
.ramrod_flags
);
7646 func_params
.f_obj
= &bp
->func_obj
;
7647 func_params
.cmd
= BNX2X_F_CMD_SWITCH_UPDATE
;
7649 /* Function parameters */
7650 switch_update_params
->suspend
= suspend
;
7652 rc
= bnx2x_func_state_change(bp
, &func_params
);
7657 static int bnx2x_reset_nic_mode(struct bnx2x
*bp
)
7659 int rc
, i
, port
= BP_PORT(bp
);
7660 int vlan_en
= 0, mac_en
[NUM_MACS
];
7662 /* Close input from network */
7663 if (bp
->mf_mode
== SINGLE_FUNCTION
) {
7664 bnx2x_set_rx_filter(&bp
->link_params
, 0);
7666 vlan_en
= REG_RD(bp
, port
? NIG_REG_LLH1_FUNC_EN
:
7667 NIG_REG_LLH0_FUNC_EN
);
7668 REG_WR(bp
, port
? NIG_REG_LLH1_FUNC_EN
:
7669 NIG_REG_LLH0_FUNC_EN
, 0);
7670 for (i
= 0; i
< NUM_MACS
; i
++) {
7671 mac_en
[i
] = REG_RD(bp
, port
?
7672 (NIG_REG_LLH1_FUNC_MEM_ENABLE
+
7674 (NIG_REG_LLH0_FUNC_MEM_ENABLE
+
7676 REG_WR(bp
, port
? (NIG_REG_LLH1_FUNC_MEM_ENABLE
+
7678 (NIG_REG_LLH0_FUNC_MEM_ENABLE
+ 4 * i
), 0);
7682 /* Close BMC to host */
7683 REG_WR(bp
, port
? NIG_REG_P0_TX_MNG_HOST_ENABLE
:
7684 NIG_REG_P1_TX_MNG_HOST_ENABLE
, 0);
7686 /* Suspend Tx switching to the PF. Completion of this ramrod
7687 * further guarantees that all the packets of that PF / child
7688 * VFs in BRB were processed by the Parser, so it is safe to
7689 * change the NIC_MODE register.
7691 rc
= bnx2x_func_switch_update(bp
, 1);
7693 BNX2X_ERR("Can't suspend tx-switching!\n");
7697 /* Change NIC_MODE register */
7698 REG_WR(bp
, PRS_REG_NIC_MODE
, 0);
7700 /* Open input from network */
7701 if (bp
->mf_mode
== SINGLE_FUNCTION
) {
7702 bnx2x_set_rx_filter(&bp
->link_params
, 1);
7704 REG_WR(bp
, port
? NIG_REG_LLH1_FUNC_EN
:
7705 NIG_REG_LLH0_FUNC_EN
, vlan_en
);
7706 for (i
= 0; i
< NUM_MACS
; i
++) {
7707 REG_WR(bp
, port
? (NIG_REG_LLH1_FUNC_MEM_ENABLE
+
7709 (NIG_REG_LLH0_FUNC_MEM_ENABLE
+ 4 * i
),
7714 /* Enable BMC to host */
7715 REG_WR(bp
, port
? NIG_REG_P0_TX_MNG_HOST_ENABLE
:
7716 NIG_REG_P1_TX_MNG_HOST_ENABLE
, 1);
7718 /* Resume Tx switching to the PF */
7719 rc
= bnx2x_func_switch_update(bp
, 0);
7721 BNX2X_ERR("Can't resume tx-switching!\n");
7725 DP(NETIF_MSG_IFUP
, "NIC MODE disabled\n");
7729 int bnx2x_init_hw_func_cnic(struct bnx2x
*bp
)
7733 bnx2x_ilt_init_op_cnic(bp
, INITOP_SET
);
7735 if (CONFIGURE_NIC_MODE(bp
)) {
7736 /* Configure searcher as part of function hw init */
7737 bnx2x_init_searcher(bp
);
7739 /* Reset NIC mode */
7740 rc
= bnx2x_reset_nic_mode(bp
);
7742 BNX2X_ERR("Can't change NIC mode!\n");
7749 static int bnx2x_init_hw_func(struct bnx2x
*bp
)
7751 int port
= BP_PORT(bp
);
7752 int func
= BP_FUNC(bp
);
7753 int init_phase
= PHASE_PF0
+ func
;
7754 struct bnx2x_ilt
*ilt
= BP_ILT(bp
);
7757 u32 main_mem_base
, main_mem_size
, main_mem_prty_clr
;
7758 int i
, main_mem_width
, rc
;
7760 DP(NETIF_MSG_HW
, "starting func init func %d\n", func
);
7762 /* FLR cleanup - hmmm */
7763 if (!CHIP_IS_E1x(bp
)) {
7764 rc
= bnx2x_pf_flr_clnup(bp
);
7771 /* set MSI reconfigure capability */
7772 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
7773 addr
= (port
? HC_REG_CONFIG_1
: HC_REG_CONFIG_0
);
7774 val
= REG_RD(bp
, addr
);
7775 val
|= HC_CONFIG_0_REG_MSI_ATTN_EN_0
;
7776 REG_WR(bp
, addr
, val
);
7779 bnx2x_init_block(bp
, BLOCK_PXP
, init_phase
);
7780 bnx2x_init_block(bp
, BLOCK_PXP2
, init_phase
);
7783 cdu_ilt_start
= ilt
->clients
[ILT_CLIENT_CDU
].start
;
7786 cdu_ilt_start
+= BNX2X_FIRST_VF_CID
/ILT_PAGE_CIDS
;
7787 cdu_ilt_start
= bnx2x_iov_init_ilt(bp
, cdu_ilt_start
);
7789 /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes
7790 * those of the VFs, so start line should be reset
7792 cdu_ilt_start
= ilt
->clients
[ILT_CLIENT_CDU
].start
;
7793 for (i
= 0; i
< L2_ILT_LINES(bp
); i
++) {
7794 ilt
->lines
[cdu_ilt_start
+ i
].page
= bp
->context
[i
].vcxt
;
7795 ilt
->lines
[cdu_ilt_start
+ i
].page_mapping
=
7796 bp
->context
[i
].cxt_mapping
;
7797 ilt
->lines
[cdu_ilt_start
+ i
].size
= bp
->context
[i
].size
;
7800 bnx2x_ilt_init_op(bp
, INITOP_SET
);
7802 if (!CONFIGURE_NIC_MODE(bp
)) {
7803 bnx2x_init_searcher(bp
);
7804 REG_WR(bp
, PRS_REG_NIC_MODE
, 0);
7805 DP(NETIF_MSG_IFUP
, "NIC MODE disabled\n");
7808 REG_WR(bp
, PRS_REG_NIC_MODE
, 1);
7809 DP(NETIF_MSG_IFUP
, "NIC MODE configured\n");
7812 if (!CHIP_IS_E1x(bp
)) {
7813 u32 pf_conf
= IGU_PF_CONF_FUNC_EN
;
7815 /* Turn on a single ISR mode in IGU if driver is going to use
7818 if (!(bp
->flags
& USING_MSIX_FLAG
))
7819 pf_conf
|= IGU_PF_CONF_SINGLE_ISR_EN
;
7821 * Timers workaround bug: function init part.
7822 * Need to wait 20msec after initializing ILT,
7823 * needed to make sure there are no requests in
7824 * one of the PXP internal queues with "old" ILT addresses
7828 * Master enable - Due to WB DMAE writes performed before this
7829 * register is re-initialized as part of the regular function
7832 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 1);
7833 /* Enable the function in IGU */
7834 REG_WR(bp
, IGU_REG_PF_CONFIGURATION
, pf_conf
);
7839 bnx2x_init_block(bp
, BLOCK_PGLUE_B
, init_phase
);
7841 if (!CHIP_IS_E1x(bp
))
7842 REG_WR(bp
, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR
, func
);
7844 bnx2x_init_block(bp
, BLOCK_ATC
, init_phase
);
7845 bnx2x_init_block(bp
, BLOCK_DMAE
, init_phase
);
7846 bnx2x_init_block(bp
, BLOCK_NIG
, init_phase
);
7847 bnx2x_init_block(bp
, BLOCK_SRC
, init_phase
);
7848 bnx2x_init_block(bp
, BLOCK_MISC
, init_phase
);
7849 bnx2x_init_block(bp
, BLOCK_TCM
, init_phase
);
7850 bnx2x_init_block(bp
, BLOCK_UCM
, init_phase
);
7851 bnx2x_init_block(bp
, BLOCK_CCM
, init_phase
);
7852 bnx2x_init_block(bp
, BLOCK_XCM
, init_phase
);
7853 bnx2x_init_block(bp
, BLOCK_TSEM
, init_phase
);
7854 bnx2x_init_block(bp
, BLOCK_USEM
, init_phase
);
7855 bnx2x_init_block(bp
, BLOCK_CSEM
, init_phase
);
7856 bnx2x_init_block(bp
, BLOCK_XSEM
, init_phase
);
7858 if (!CHIP_IS_E1x(bp
))
7859 REG_WR(bp
, QM_REG_PF_EN
, 1);
7861 if (!CHIP_IS_E1x(bp
)) {
7862 REG_WR(bp
, TSEM_REG_VFPF_ERR_NUM
, BNX2X_MAX_NUM_OF_VFS
+ func
);
7863 REG_WR(bp
, USEM_REG_VFPF_ERR_NUM
, BNX2X_MAX_NUM_OF_VFS
+ func
);
7864 REG_WR(bp
, CSEM_REG_VFPF_ERR_NUM
, BNX2X_MAX_NUM_OF_VFS
+ func
);
7865 REG_WR(bp
, XSEM_REG_VFPF_ERR_NUM
, BNX2X_MAX_NUM_OF_VFS
+ func
);
7867 bnx2x_init_block(bp
, BLOCK_QM
, init_phase
);
7869 bnx2x_init_block(bp
, BLOCK_TM
, init_phase
);
7870 bnx2x_init_block(bp
, BLOCK_DORQ
, init_phase
);
7871 REG_WR(bp
, DORQ_REG_MODE_ACT
, 1); /* no dpm */
7873 bnx2x_iov_init_dq(bp
);
7875 bnx2x_init_block(bp
, BLOCK_BRB1
, init_phase
);
7876 bnx2x_init_block(bp
, BLOCK_PRS
, init_phase
);
7877 bnx2x_init_block(bp
, BLOCK_TSDM
, init_phase
);
7878 bnx2x_init_block(bp
, BLOCK_CSDM
, init_phase
);
7879 bnx2x_init_block(bp
, BLOCK_USDM
, init_phase
);
7880 bnx2x_init_block(bp
, BLOCK_XSDM
, init_phase
);
7881 bnx2x_init_block(bp
, BLOCK_UPB
, init_phase
);
7882 bnx2x_init_block(bp
, BLOCK_XPB
, init_phase
);
7883 bnx2x_init_block(bp
, BLOCK_PBF
, init_phase
);
7884 if (!CHIP_IS_E1x(bp
))
7885 REG_WR(bp
, PBF_REG_DISABLE_PF
, 0);
7887 bnx2x_init_block(bp
, BLOCK_CDU
, init_phase
);
7889 bnx2x_init_block(bp
, BLOCK_CFC
, init_phase
);
7891 if (!CHIP_IS_E1x(bp
))
7892 REG_WR(bp
, CFC_REG_WEAK_ENABLE_PF
, 1);
7895 REG_WR(bp
, NIG_REG_LLH0_FUNC_EN
+ port
*8, 1);
7896 REG_WR(bp
, NIG_REG_LLH0_FUNC_VLAN_ID
+ port
*8, bp
->mf_ov
);
7899 bnx2x_init_block(bp
, BLOCK_MISC_AEU
, init_phase
);
7901 /* HC init per function */
7902 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
7903 if (CHIP_IS_E1H(bp
)) {
7904 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_12
+ func
*4, 0);
7906 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, 0);
7907 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, 0);
7909 bnx2x_init_block(bp
, BLOCK_HC
, init_phase
);
7912 int num_segs
, sb_idx
, prod_offset
;
7914 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_12
+ func
*4, 0);
7916 if (!CHIP_IS_E1x(bp
)) {
7917 REG_WR(bp
, IGU_REG_LEADING_EDGE_LATCH
, 0);
7918 REG_WR(bp
, IGU_REG_TRAILING_EDGE_LATCH
, 0);
7921 bnx2x_init_block(bp
, BLOCK_IGU
, init_phase
);
7923 if (!CHIP_IS_E1x(bp
)) {
7927 * E2 mode: address 0-135 match to the mapping memory;
7928 * 136 - PF0 default prod; 137 - PF1 default prod;
7929 * 138 - PF2 default prod; 139 - PF3 default prod;
7930 * 140 - PF0 attn prod; 141 - PF1 attn prod;
7931 * 142 - PF2 attn prod; 143 - PF3 attn prod;
7934 * E1.5 mode - In backward compatible mode;
7935 * for non default SB; each even line in the memory
7936 * holds the U producer and each odd line hold
7937 * the C producer. The first 128 producers are for
7938 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
7939 * producers are for the DSB for each PF.
7940 * Each PF has five segments: (the order inside each
7941 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
7942 * 132-135 C prods; 136-139 X prods; 140-143 T prods;
7943 * 144-147 attn prods;
7945 /* non-default-status-blocks */
7946 num_segs
= CHIP_INT_MODE_IS_BC(bp
) ?
7947 IGU_BC_NDSB_NUM_SEGS
: IGU_NORM_NDSB_NUM_SEGS
;
7948 for (sb_idx
= 0; sb_idx
< bp
->igu_sb_cnt
; sb_idx
++) {
7949 prod_offset
= (bp
->igu_base_sb
+ sb_idx
) *
7952 for (i
= 0; i
< num_segs
; i
++) {
7953 addr
= IGU_REG_PROD_CONS_MEMORY
+
7954 (prod_offset
+ i
) * 4;
7955 REG_WR(bp
, addr
, 0);
7957 /* send consumer update with value 0 */
7958 bnx2x_ack_sb(bp
, bp
->igu_base_sb
+ sb_idx
,
7959 USTORM_ID
, 0, IGU_INT_NOP
, 1);
7960 bnx2x_igu_clear_sb(bp
,
7961 bp
->igu_base_sb
+ sb_idx
);
7964 /* default-status-blocks */
7965 num_segs
= CHIP_INT_MODE_IS_BC(bp
) ?
7966 IGU_BC_DSB_NUM_SEGS
: IGU_NORM_DSB_NUM_SEGS
;
7968 if (CHIP_MODE_IS_4_PORT(bp
))
7969 dsb_idx
= BP_FUNC(bp
);
7971 dsb_idx
= BP_VN(bp
);
7973 prod_offset
= (CHIP_INT_MODE_IS_BC(bp
) ?
7974 IGU_BC_BASE_DSB_PROD
+ dsb_idx
:
7975 IGU_NORM_BASE_DSB_PROD
+ dsb_idx
);
7978 * igu prods come in chunks of E1HVN_MAX (4) -
7979 * does not matters what is the current chip mode
7981 for (i
= 0; i
< (num_segs
* E1HVN_MAX
);
7983 addr
= IGU_REG_PROD_CONS_MEMORY
+
7984 (prod_offset
+ i
)*4;
7985 REG_WR(bp
, addr
, 0);
7987 /* send consumer update with 0 */
7988 if (CHIP_INT_MODE_IS_BC(bp
)) {
7989 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7990 USTORM_ID
, 0, IGU_INT_NOP
, 1);
7991 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7992 CSTORM_ID
, 0, IGU_INT_NOP
, 1);
7993 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7994 XSTORM_ID
, 0, IGU_INT_NOP
, 1);
7995 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7996 TSTORM_ID
, 0, IGU_INT_NOP
, 1);
7997 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
7998 ATTENTION_ID
, 0, IGU_INT_NOP
, 1);
8000 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
8001 USTORM_ID
, 0, IGU_INT_NOP
, 1);
8002 bnx2x_ack_sb(bp
, bp
->igu_dsb_id
,
8003 ATTENTION_ID
, 0, IGU_INT_NOP
, 1);
8005 bnx2x_igu_clear_sb(bp
, bp
->igu_dsb_id
);
8007 /* !!! These should become driver const once
8008 rf-tool supports split-68 const */
8009 REG_WR(bp
, IGU_REG_SB_INT_BEFORE_MASK_LSB
, 0);
8010 REG_WR(bp
, IGU_REG_SB_INT_BEFORE_MASK_MSB
, 0);
8011 REG_WR(bp
, IGU_REG_SB_MASK_LSB
, 0);
8012 REG_WR(bp
, IGU_REG_SB_MASK_MSB
, 0);
8013 REG_WR(bp
, IGU_REG_PBA_STATUS_LSB
, 0);
8014 REG_WR(bp
, IGU_REG_PBA_STATUS_MSB
, 0);
8018 /* Reset PCIE errors for debug */
8019 REG_WR(bp
, 0x2114, 0xffffffff);
8020 REG_WR(bp
, 0x2120, 0xffffffff);
8022 if (CHIP_IS_E1x(bp
)) {
8023 main_mem_size
= HC_REG_MAIN_MEMORY_SIZE
/ 2; /*dwords*/
8024 main_mem_base
= HC_REG_MAIN_MEMORY
+
8025 BP_PORT(bp
) * (main_mem_size
* 4);
8026 main_mem_prty_clr
= HC_REG_HC_PRTY_STS_CLR
;
8029 val
= REG_RD(bp
, main_mem_prty_clr
);
8032 "Hmmm... Parity errors in HC block during function init (0x%x)!\n",
8035 /* Clear "false" parity errors in MSI-X table */
8036 for (i
= main_mem_base
;
8037 i
< main_mem_base
+ main_mem_size
* 4;
8038 i
+= main_mem_width
) {
8039 bnx2x_read_dmae(bp
, i
, main_mem_width
/ 4);
8040 bnx2x_write_dmae(bp
, bnx2x_sp_mapping(bp
, wb_data
),
8041 i
, main_mem_width
/ 4);
8043 /* Clear HC parity attention */
8044 REG_RD(bp
, main_mem_prty_clr
);
8047 #ifdef BNX2X_STOP_ON_ERROR
8048 /* Enable STORMs SP logging */
8049 REG_WR8(bp
, BAR_USTRORM_INTMEM
+
8050 USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp
)), 1);
8051 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+
8052 TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp
)), 1);
8053 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+
8054 CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp
)), 1);
8055 REG_WR8(bp
, BAR_XSTRORM_INTMEM
+
8056 XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp
)), 1);
8059 bnx2x_phy_probe(&bp
->link_params
);
8064 void bnx2x_free_mem_cnic(struct bnx2x
*bp
)
8066 bnx2x_ilt_mem_op_cnic(bp
, ILT_MEMOP_FREE
);
8068 if (!CHIP_IS_E1x(bp
))
8069 BNX2X_PCI_FREE(bp
->cnic_sb
.e2_sb
, bp
->cnic_sb_mapping
,
8070 sizeof(struct host_hc_status_block_e2
));
8072 BNX2X_PCI_FREE(bp
->cnic_sb
.e1x_sb
, bp
->cnic_sb_mapping
,
8073 sizeof(struct host_hc_status_block_e1x
));
8075 BNX2X_PCI_FREE(bp
->t2
, bp
->t2_mapping
, SRC_T2_SZ
);
8078 void bnx2x_free_mem(struct bnx2x
*bp
)
8082 BNX2X_PCI_FREE(bp
->fw_stats
, bp
->fw_stats_mapping
,
8083 bp
->fw_stats_data_sz
+ bp
->fw_stats_req_sz
);
8088 BNX2X_PCI_FREE(bp
->def_status_blk
, bp
->def_status_blk_mapping
,
8089 sizeof(struct host_sp_status_block
));
8091 BNX2X_PCI_FREE(bp
->slowpath
, bp
->slowpath_mapping
,
8092 sizeof(struct bnx2x_slowpath
));
8094 for (i
= 0; i
< L2_ILT_LINES(bp
); i
++)
8095 BNX2X_PCI_FREE(bp
->context
[i
].vcxt
, bp
->context
[i
].cxt_mapping
,
8096 bp
->context
[i
].size
);
8097 bnx2x_ilt_mem_op(bp
, ILT_MEMOP_FREE
);
8099 BNX2X_FREE(bp
->ilt
->lines
);
8101 BNX2X_PCI_FREE(bp
->spq
, bp
->spq_mapping
, BCM_PAGE_SIZE
);
8103 BNX2X_PCI_FREE(bp
->eq_ring
, bp
->eq_mapping
,
8104 BCM_PAGE_SIZE
* NUM_EQ_PAGES
);
8106 BNX2X_PCI_FREE(bp
->t2
, bp
->t2_mapping
, SRC_T2_SZ
);
8108 bnx2x_iov_free_mem(bp
);
8111 int bnx2x_alloc_mem_cnic(struct bnx2x
*bp
)
8113 if (!CHIP_IS_E1x(bp
)) {
8114 /* size = the status block + ramrod buffers */
8115 bp
->cnic_sb
.e2_sb
= BNX2X_PCI_ALLOC(&bp
->cnic_sb_mapping
,
8116 sizeof(struct host_hc_status_block_e2
));
8117 if (!bp
->cnic_sb
.e2_sb
)
8120 bp
->cnic_sb
.e1x_sb
= BNX2X_PCI_ALLOC(&bp
->cnic_sb_mapping
,
8121 sizeof(struct host_hc_status_block_e1x
));
8122 if (!bp
->cnic_sb
.e1x_sb
)
8126 if (CONFIGURE_NIC_MODE(bp
) && !bp
->t2
) {
8127 /* allocate searcher T2 table, as it wasn't allocated before */
8128 bp
->t2
= BNX2X_PCI_ALLOC(&bp
->t2_mapping
, SRC_T2_SZ
);
8133 /* write address to which L5 should insert its values */
8134 bp
->cnic_eth_dev
.addr_drv_info_to_mcp
=
8135 &bp
->slowpath
->drv_info_to_mcp
;
8137 if (bnx2x_ilt_mem_op_cnic(bp
, ILT_MEMOP_ALLOC
))
8143 bnx2x_free_mem_cnic(bp
);
8144 BNX2X_ERR("Can't allocate memory\n");
8148 int bnx2x_alloc_mem(struct bnx2x
*bp
)
8150 int i
, allocated
, context_size
;
8152 if (!CONFIGURE_NIC_MODE(bp
) && !bp
->t2
) {
8153 /* allocate searcher T2 table */
8154 bp
->t2
= BNX2X_PCI_ALLOC(&bp
->t2_mapping
, SRC_T2_SZ
);
8159 bp
->def_status_blk
= BNX2X_PCI_ALLOC(&bp
->def_status_blk_mapping
,
8160 sizeof(struct host_sp_status_block
));
8161 if (!bp
->def_status_blk
)
8164 bp
->slowpath
= BNX2X_PCI_ALLOC(&bp
->slowpath_mapping
,
8165 sizeof(struct bnx2x_slowpath
));
8169 /* Allocate memory for CDU context:
8170 * This memory is allocated separately and not in the generic ILT
8171 * functions because CDU differs in few aspects:
8172 * 1. There are multiple entities allocating memory for context -
8173 * 'regular' driver, CNIC and SRIOV driver. Each separately controls
8174 * its own ILT lines.
8175 * 2. Since CDU page-size is not a single 4KB page (which is the case
8176 * for the other ILT clients), to be efficient we want to support
8177 * allocation of sub-page-size in the last entry.
8178 * 3. Context pointers are used by the driver to pass to FW / update
8179 * the context (for the other ILT clients the pointers are used just to
8180 * free the memory during unload).
8182 context_size
= sizeof(union cdu_context
) * BNX2X_L2_CID_COUNT(bp
);
8184 for (i
= 0, allocated
= 0; allocated
< context_size
; i
++) {
8185 bp
->context
[i
].size
= min(CDU_ILT_PAGE_SZ
,
8186 (context_size
- allocated
));
8187 bp
->context
[i
].vcxt
= BNX2X_PCI_ALLOC(&bp
->context
[i
].cxt_mapping
,
8188 bp
->context
[i
].size
);
8189 if (!bp
->context
[i
].vcxt
)
8191 allocated
+= bp
->context
[i
].size
;
8193 bp
->ilt
->lines
= kcalloc(ILT_MAX_LINES
, sizeof(struct ilt_line
),
8195 if (!bp
->ilt
->lines
)
8198 if (bnx2x_ilt_mem_op(bp
, ILT_MEMOP_ALLOC
))
8201 if (bnx2x_iov_alloc_mem(bp
))
8204 /* Slow path ring */
8205 bp
->spq
= BNX2X_PCI_ALLOC(&bp
->spq_mapping
, BCM_PAGE_SIZE
);
8210 bp
->eq_ring
= BNX2X_PCI_ALLOC(&bp
->eq_mapping
,
8211 BCM_PAGE_SIZE
* NUM_EQ_PAGES
);
8219 BNX2X_ERR("Can't allocate memory\n");
8224 * Init service functions
8227 int bnx2x_set_mac_one(struct bnx2x
*bp
, u8
*mac
,
8228 struct bnx2x_vlan_mac_obj
*obj
, bool set
,
8229 int mac_type
, unsigned long *ramrod_flags
)
8232 struct bnx2x_vlan_mac_ramrod_params ramrod_param
;
8234 memset(&ramrod_param
, 0, sizeof(ramrod_param
));
8236 /* Fill general parameters */
8237 ramrod_param
.vlan_mac_obj
= obj
;
8238 ramrod_param
.ramrod_flags
= *ramrod_flags
;
8240 /* Fill a user request section if needed */
8241 if (!test_bit(RAMROD_CONT
, ramrod_flags
)) {
8242 memcpy(ramrod_param
.user_req
.u
.mac
.mac
, mac
, ETH_ALEN
);
8244 __set_bit(mac_type
, &ramrod_param
.user_req
.vlan_mac_flags
);
8246 /* Set the command: ADD or DEL */
8248 ramrod_param
.user_req
.cmd
= BNX2X_VLAN_MAC_ADD
;
8250 ramrod_param
.user_req
.cmd
= BNX2X_VLAN_MAC_DEL
;
8253 rc
= bnx2x_config_vlan_mac(bp
, &ramrod_param
);
8255 if (rc
== -EEXIST
) {
8256 DP(BNX2X_MSG_SP
, "Failed to schedule ADD operations: %d\n", rc
);
8257 /* do not treat adding same MAC as error */
8260 BNX2X_ERR("%s MAC failed\n", (set
? "Set" : "Del"));
8265 int bnx2x_del_all_macs(struct bnx2x
*bp
,
8266 struct bnx2x_vlan_mac_obj
*mac_obj
,
8267 int mac_type
, bool wait_for_comp
)
8270 unsigned long ramrod_flags
= 0, vlan_mac_flags
= 0;
8272 /* Wait for completion of requested */
8274 __set_bit(RAMROD_COMP_WAIT
, &ramrod_flags
);
8276 /* Set the mac type of addresses we want to clear */
8277 __set_bit(mac_type
, &vlan_mac_flags
);
8279 rc
= mac_obj
->delete_all(bp
, mac_obj
, &vlan_mac_flags
, &ramrod_flags
);
8281 BNX2X_ERR("Failed to delete MACs: %d\n", rc
);
8286 int bnx2x_set_eth_mac(struct bnx2x
*bp
, bool set
)
8288 if (is_zero_ether_addr(bp
->dev
->dev_addr
) &&
8289 (IS_MF_STORAGE_SD(bp
) || IS_MF_FCOE_AFEX(bp
))) {
8290 DP(NETIF_MSG_IFUP
| NETIF_MSG_IFDOWN
,
8291 "Ignoring Zero MAC for STORAGE SD mode\n");
8296 unsigned long ramrod_flags
= 0;
8298 DP(NETIF_MSG_IFUP
, "Adding Eth MAC\n");
8299 __set_bit(RAMROD_COMP_WAIT
, &ramrod_flags
);
8300 return bnx2x_set_mac_one(bp
, bp
->dev
->dev_addr
,
8301 &bp
->sp_objs
->mac_obj
, set
,
8302 BNX2X_ETH_MAC
, &ramrod_flags
);
8304 return bnx2x_vfpf_config_mac(bp
, bp
->dev
->dev_addr
,
8305 bp
->fp
->index
, true);
8309 int bnx2x_setup_leading(struct bnx2x
*bp
)
8312 return bnx2x_setup_queue(bp
, &bp
->fp
[0], true);
8314 return bnx2x_vfpf_setup_q(bp
, &bp
->fp
[0], true);
8318 * bnx2x_set_int_mode - configure interrupt mode
8320 * @bp: driver handle
8322 * In case of MSI-X it will also try to enable MSI-X.
8324 int bnx2x_set_int_mode(struct bnx2x
*bp
)
8328 if (IS_VF(bp
) && int_mode
!= BNX2X_INT_MODE_MSIX
) {
8329 BNX2X_ERR("VF not loaded since interrupt mode not msix\n");
8334 case BNX2X_INT_MODE_MSIX
:
8335 /* attempt to enable msix */
8336 rc
= bnx2x_enable_msix(bp
);
8342 /* vfs use only msix */
8343 if (rc
&& IS_VF(bp
))
8346 /* failed to enable multiple MSI-X */
8347 BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n",
8349 1 + bp
->num_cnic_queues
);
8351 /* falling through... */
8352 case BNX2X_INT_MODE_MSI
:
8353 bnx2x_enable_msi(bp
);
8355 /* falling through... */
8356 case BNX2X_INT_MODE_INTX
:
8357 bp
->num_ethernet_queues
= 1;
8358 bp
->num_queues
= bp
->num_ethernet_queues
+ bp
->num_cnic_queues
;
8359 BNX2X_DEV_INFO("set number of queues to 1\n");
8362 BNX2X_DEV_INFO("unknown value in int_mode module parameter\n");
8368 /* must be called prior to any HW initializations */
8369 static inline u16
bnx2x_cid_ilt_lines(struct bnx2x
*bp
)
8372 return (BNX2X_FIRST_VF_CID
+ BNX2X_VF_CIDS
)/ILT_PAGE_CIDS
;
8373 return L2_ILT_LINES(bp
);
8376 void bnx2x_ilt_set_info(struct bnx2x
*bp
)
8378 struct ilt_client_info
*ilt_client
;
8379 struct bnx2x_ilt
*ilt
= BP_ILT(bp
);
8382 ilt
->start_line
= FUNC_ILT_BASE(BP_FUNC(bp
));
8383 DP(BNX2X_MSG_SP
, "ilt starts at line %d\n", ilt
->start_line
);
8386 ilt_client
= &ilt
->clients
[ILT_CLIENT_CDU
];
8387 ilt_client
->client_num
= ILT_CLIENT_CDU
;
8388 ilt_client
->page_size
= CDU_ILT_PAGE_SZ
;
8389 ilt_client
->flags
= ILT_CLIENT_SKIP_MEM
;
8390 ilt_client
->start
= line
;
8391 line
+= bnx2x_cid_ilt_lines(bp
);
8393 if (CNIC_SUPPORT(bp
))
8394 line
+= CNIC_ILT_LINES
;
8395 ilt_client
->end
= line
- 1;
8397 DP(NETIF_MSG_IFUP
, "ilt client[CDU]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8400 ilt_client
->page_size
,
8402 ilog2(ilt_client
->page_size
>> 12));
8405 if (QM_INIT(bp
->qm_cid_count
)) {
8406 ilt_client
= &ilt
->clients
[ILT_CLIENT_QM
];
8407 ilt_client
->client_num
= ILT_CLIENT_QM
;
8408 ilt_client
->page_size
= QM_ILT_PAGE_SZ
;
8409 ilt_client
->flags
= 0;
8410 ilt_client
->start
= line
;
8412 /* 4 bytes for each cid */
8413 line
+= DIV_ROUND_UP(bp
->qm_cid_count
* QM_QUEUES_PER_FUNC
* 4,
8416 ilt_client
->end
= line
- 1;
8419 "ilt client[QM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8422 ilt_client
->page_size
,
8424 ilog2(ilt_client
->page_size
>> 12));
8427 if (CNIC_SUPPORT(bp
)) {
8429 ilt_client
= &ilt
->clients
[ILT_CLIENT_SRC
];
8430 ilt_client
->client_num
= ILT_CLIENT_SRC
;
8431 ilt_client
->page_size
= SRC_ILT_PAGE_SZ
;
8432 ilt_client
->flags
= 0;
8433 ilt_client
->start
= line
;
8434 line
+= SRC_ILT_LINES
;
8435 ilt_client
->end
= line
- 1;
8438 "ilt client[SRC]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8441 ilt_client
->page_size
,
8443 ilog2(ilt_client
->page_size
>> 12));
8446 ilt_client
= &ilt
->clients
[ILT_CLIENT_TM
];
8447 ilt_client
->client_num
= ILT_CLIENT_TM
;
8448 ilt_client
->page_size
= TM_ILT_PAGE_SZ
;
8449 ilt_client
->flags
= 0;
8450 ilt_client
->start
= line
;
8451 line
+= TM_ILT_LINES
;
8452 ilt_client
->end
= line
- 1;
8455 "ilt client[TM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8458 ilt_client
->page_size
,
8460 ilog2(ilt_client
->page_size
>> 12));
8463 BUG_ON(line
> ILT_MAX_LINES
);
8467 * bnx2x_pf_q_prep_init - prepare INIT transition parameters
8469 * @bp: driver handle
8470 * @fp: pointer to fastpath
8471 * @init_params: pointer to parameters structure
8473 * parameters configured:
8474 * - HC configuration
8475 * - Queue's CDU context
8477 static void bnx2x_pf_q_prep_init(struct bnx2x
*bp
,
8478 struct bnx2x_fastpath
*fp
, struct bnx2x_queue_init_params
*init_params
)
8481 int cxt_index
, cxt_offset
;
8483 /* FCoE Queue uses Default SB, thus has no HC capabilities */
8484 if (!IS_FCOE_FP(fp
)) {
8485 __set_bit(BNX2X_Q_FLG_HC
, &init_params
->rx
.flags
);
8486 __set_bit(BNX2X_Q_FLG_HC
, &init_params
->tx
.flags
);
8488 /* If HC is supported, enable host coalescing in the transition
8491 __set_bit(BNX2X_Q_FLG_HC_EN
, &init_params
->rx
.flags
);
8492 __set_bit(BNX2X_Q_FLG_HC_EN
, &init_params
->tx
.flags
);
8495 init_params
->rx
.hc_rate
= bp
->rx_ticks
?
8496 (1000000 / bp
->rx_ticks
) : 0;
8497 init_params
->tx
.hc_rate
= bp
->tx_ticks
?
8498 (1000000 / bp
->tx_ticks
) : 0;
8501 init_params
->rx
.fw_sb_id
= init_params
->tx
.fw_sb_id
=
8505 * CQ index among the SB indices: FCoE clients uses the default
8506 * SB, therefore it's different.
8508 init_params
->rx
.sb_cq_index
= HC_INDEX_ETH_RX_CQ_CONS
;
8509 init_params
->tx
.sb_cq_index
= HC_INDEX_ETH_FIRST_TX_CQ_CONS
;
8512 /* set maximum number of COSs supported by this queue */
8513 init_params
->max_cos
= fp
->max_cos
;
8515 DP(NETIF_MSG_IFUP
, "fp: %d setting queue params max cos to: %d\n",
8516 fp
->index
, init_params
->max_cos
);
8518 /* set the context pointers queue object */
8519 for (cos
= FIRST_TX_COS_INDEX
; cos
< init_params
->max_cos
; cos
++) {
8520 cxt_index
= fp
->txdata_ptr
[cos
]->cid
/ ILT_PAGE_CIDS
;
8521 cxt_offset
= fp
->txdata_ptr
[cos
]->cid
- (cxt_index
*
8523 init_params
->cxts
[cos
] =
8524 &bp
->context
[cxt_index
].vcxt
[cxt_offset
].eth
;
8528 static int bnx2x_setup_tx_only(struct bnx2x
*bp
, struct bnx2x_fastpath
*fp
,
8529 struct bnx2x_queue_state_params
*q_params
,
8530 struct bnx2x_queue_setup_tx_only_params
*tx_only_params
,
8531 int tx_index
, bool leading
)
8533 memset(tx_only_params
, 0, sizeof(*tx_only_params
));
8535 /* Set the command */
8536 q_params
->cmd
= BNX2X_Q_CMD_SETUP_TX_ONLY
;
8538 /* Set tx-only QUEUE flags: don't zero statistics */
8539 tx_only_params
->flags
= bnx2x_get_common_flags(bp
, fp
, false);
8541 /* choose the index of the cid to send the slow path on */
8542 tx_only_params
->cid_index
= tx_index
;
8544 /* Set general TX_ONLY_SETUP parameters */
8545 bnx2x_pf_q_prep_general(bp
, fp
, &tx_only_params
->gen_params
, tx_index
);
8547 /* Set Tx TX_ONLY_SETUP parameters */
8548 bnx2x_pf_tx_q_prep(bp
, fp
, &tx_only_params
->txq_params
, tx_index
);
8551 "preparing to send tx-only ramrod for connection: cos %d, primary cid %d, cid %d, client id %d, sp-client id %d, flags %lx\n",
8552 tx_index
, q_params
->q_obj
->cids
[FIRST_TX_COS_INDEX
],
8553 q_params
->q_obj
->cids
[tx_index
], q_params
->q_obj
->cl_id
,
8554 tx_only_params
->gen_params
.spcl_id
, tx_only_params
->flags
);
8556 /* send the ramrod */
8557 return bnx2x_queue_state_change(bp
, q_params
);
8561 * bnx2x_setup_queue - setup queue
8563 * @bp: driver handle
8564 * @fp: pointer to fastpath
8565 * @leading: is leading
8567 * This function performs 2 steps in a Queue state machine
8568 * actually: 1) RESET->INIT 2) INIT->SETUP
8571 int bnx2x_setup_queue(struct bnx2x
*bp
, struct bnx2x_fastpath
*fp
,
8574 struct bnx2x_queue_state_params q_params
= {NULL
};
8575 struct bnx2x_queue_setup_params
*setup_params
=
8576 &q_params
.params
.setup
;
8577 struct bnx2x_queue_setup_tx_only_params
*tx_only_params
=
8578 &q_params
.params
.tx_only
;
8582 DP(NETIF_MSG_IFUP
, "setting up queue %d\n", fp
->index
);
8584 /* reset IGU state skip FCoE L2 queue */
8585 if (!IS_FCOE_FP(fp
))
8586 bnx2x_ack_sb(bp
, fp
->igu_sb_id
, USTORM_ID
, 0,
8589 q_params
.q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
8590 /* We want to wait for completion in this context */
8591 __set_bit(RAMROD_COMP_WAIT
, &q_params
.ramrod_flags
);
8593 /* Prepare the INIT parameters */
8594 bnx2x_pf_q_prep_init(bp
, fp
, &q_params
.params
.init
);
8596 /* Set the command */
8597 q_params
.cmd
= BNX2X_Q_CMD_INIT
;
8599 /* Change the state to INIT */
8600 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8602 BNX2X_ERR("Queue(%d) INIT failed\n", fp
->index
);
8606 DP(NETIF_MSG_IFUP
, "init complete\n");
8608 /* Now move the Queue to the SETUP state... */
8609 memset(setup_params
, 0, sizeof(*setup_params
));
8611 /* Set QUEUE flags */
8612 setup_params
->flags
= bnx2x_get_q_flags(bp
, fp
, leading
);
8614 /* Set general SETUP parameters */
8615 bnx2x_pf_q_prep_general(bp
, fp
, &setup_params
->gen_params
,
8616 FIRST_TX_COS_INDEX
);
8618 bnx2x_pf_rx_q_prep(bp
, fp
, &setup_params
->pause_params
,
8619 &setup_params
->rxq_params
);
8621 bnx2x_pf_tx_q_prep(bp
, fp
, &setup_params
->txq_params
,
8622 FIRST_TX_COS_INDEX
);
8624 /* Set the command */
8625 q_params
.cmd
= BNX2X_Q_CMD_SETUP
;
8628 bp
->fcoe_init
= true;
8630 /* Change the state to SETUP */
8631 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8633 BNX2X_ERR("Queue(%d) SETUP failed\n", fp
->index
);
8637 /* loop through the relevant tx-only indices */
8638 for (tx_index
= FIRST_TX_ONLY_COS_INDEX
;
8639 tx_index
< fp
->max_cos
;
8642 /* prepare and send tx-only ramrod*/
8643 rc
= bnx2x_setup_tx_only(bp
, fp
, &q_params
,
8644 tx_only_params
, tx_index
, leading
);
8646 BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n",
8647 fp
->index
, tx_index
);
8655 static int bnx2x_stop_queue(struct bnx2x
*bp
, int index
)
8657 struct bnx2x_fastpath
*fp
= &bp
->fp
[index
];
8658 struct bnx2x_fp_txdata
*txdata
;
8659 struct bnx2x_queue_state_params q_params
= {NULL
};
8662 DP(NETIF_MSG_IFDOWN
, "stopping queue %d cid %d\n", index
, fp
->cid
);
8664 q_params
.q_obj
= &bnx2x_sp_obj(bp
, fp
).q_obj
;
8665 /* We want to wait for completion in this context */
8666 __set_bit(RAMROD_COMP_WAIT
, &q_params
.ramrod_flags
);
8668 /* close tx-only connections */
8669 for (tx_index
= FIRST_TX_ONLY_COS_INDEX
;
8670 tx_index
< fp
->max_cos
;
8673 /* ascertain this is a normal queue*/
8674 txdata
= fp
->txdata_ptr
[tx_index
];
8676 DP(NETIF_MSG_IFDOWN
, "stopping tx-only queue %d\n",
8679 /* send halt terminate on tx-only connection */
8680 q_params
.cmd
= BNX2X_Q_CMD_TERMINATE
;
8681 memset(&q_params
.params
.terminate
, 0,
8682 sizeof(q_params
.params
.terminate
));
8683 q_params
.params
.terminate
.cid_index
= tx_index
;
8685 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8689 /* send halt terminate on tx-only connection */
8690 q_params
.cmd
= BNX2X_Q_CMD_CFC_DEL
;
8691 memset(&q_params
.params
.cfc_del
, 0,
8692 sizeof(q_params
.params
.cfc_del
));
8693 q_params
.params
.cfc_del
.cid_index
= tx_index
;
8694 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8698 /* Stop the primary connection: */
8699 /* ...halt the connection */
8700 q_params
.cmd
= BNX2X_Q_CMD_HALT
;
8701 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8705 /* ...terminate the connection */
8706 q_params
.cmd
= BNX2X_Q_CMD_TERMINATE
;
8707 memset(&q_params
.params
.terminate
, 0,
8708 sizeof(q_params
.params
.terminate
));
8709 q_params
.params
.terminate
.cid_index
= FIRST_TX_COS_INDEX
;
8710 rc
= bnx2x_queue_state_change(bp
, &q_params
);
8713 /* ...delete cfc entry */
8714 q_params
.cmd
= BNX2X_Q_CMD_CFC_DEL
;
8715 memset(&q_params
.params
.cfc_del
, 0,
8716 sizeof(q_params
.params
.cfc_del
));
8717 q_params
.params
.cfc_del
.cid_index
= FIRST_TX_COS_INDEX
;
8718 return bnx2x_queue_state_change(bp
, &q_params
);
8721 static void bnx2x_reset_func(struct bnx2x
*bp
)
8723 int port
= BP_PORT(bp
);
8724 int func
= BP_FUNC(bp
);
8727 /* Disable the function in the FW */
8728 REG_WR8(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_FUNC_EN_OFFSET(func
), 0);
8729 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+ CSTORM_FUNC_EN_OFFSET(func
), 0);
8730 REG_WR8(bp
, BAR_TSTRORM_INTMEM
+ TSTORM_FUNC_EN_OFFSET(func
), 0);
8731 REG_WR8(bp
, BAR_USTRORM_INTMEM
+ USTORM_FUNC_EN_OFFSET(func
), 0);
8734 for_each_eth_queue(bp
, i
) {
8735 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
8736 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+
8737 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp
->fw_sb_id
),
8741 if (CNIC_LOADED(bp
))
8743 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+
8744 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET
8745 (bnx2x_cnic_fw_sb_id(bp
)), SB_DISABLED
);
8748 REG_WR8(bp
, BAR_CSTRORM_INTMEM
+
8749 CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func
),
8752 for (i
= 0; i
< XSTORM_SPQ_DATA_SIZE
/ 4; i
++)
8753 REG_WR(bp
, BAR_XSTRORM_INTMEM
+ XSTORM_SPQ_DATA_OFFSET(func
),
8757 if (bp
->common
.int_block
== INT_BLOCK_HC
) {
8758 REG_WR(bp
, HC_REG_LEADING_EDGE_0
+ port
*8, 0);
8759 REG_WR(bp
, HC_REG_TRAILING_EDGE_0
+ port
*8, 0);
8761 REG_WR(bp
, IGU_REG_LEADING_EDGE_LATCH
, 0);
8762 REG_WR(bp
, IGU_REG_TRAILING_EDGE_LATCH
, 0);
8765 if (CNIC_LOADED(bp
)) {
8766 /* Disable Timer scan */
8767 REG_WR(bp
, TM_REG_EN_LINEAR0_TIMER
+ port
*4, 0);
8769 * Wait for at least 10ms and up to 2 second for the timers
8772 for (i
= 0; i
< 200; i
++) {
8773 usleep_range(10000, 20000);
8774 if (!REG_RD(bp
, TM_REG_LIN0_SCAN_ON
+ port
*4))
8779 bnx2x_clear_func_ilt(bp
, func
);
8781 /* Timers workaround bug for E2: if this is vnic-3,
8782 * we need to set the entire ilt range for this timers.
8784 if (!CHIP_IS_E1x(bp
) && BP_VN(bp
) == 3) {
8785 struct ilt_client_info ilt_cli
;
8786 /* use dummy TM client */
8787 memset(&ilt_cli
, 0, sizeof(struct ilt_client_info
));
8789 ilt_cli
.end
= ILT_NUM_PAGE_ENTRIES
- 1;
8790 ilt_cli
.client_num
= ILT_CLIENT_TM
;
8792 bnx2x_ilt_boundry_init_op(bp
, &ilt_cli
, 0, INITOP_CLEAR
);
8795 /* this assumes that reset_port() called before reset_func()*/
8796 if (!CHIP_IS_E1x(bp
))
8797 bnx2x_pf_disable(bp
);
8802 static void bnx2x_reset_port(struct bnx2x
*bp
)
8804 int port
= BP_PORT(bp
);
8807 /* Reset physical Link */
8808 bnx2x__link_reset(bp
);
8810 REG_WR(bp
, NIG_REG_MASK_INTERRUPT_PORT0
+ port
*4, 0);
8812 /* Do not rcv packets to BRB */
8813 REG_WR(bp
, NIG_REG_LLH0_BRB1_DRV_MASK
+ port
*4, 0x0);
8814 /* Do not direct rcv packets that are not for MCP to the BRB */
8815 REG_WR(bp
, (port
? NIG_REG_LLH1_BRB1_NOT_MCP
:
8816 NIG_REG_LLH0_BRB1_NOT_MCP
), 0x0);
8819 REG_WR(bp
, MISC_REG_AEU_MASK_ATTN_FUNC_0
+ port
*4, 0);
8822 /* Check for BRB port occupancy */
8823 val
= REG_RD(bp
, BRB1_REG_PORT_NUM_OCC_BLOCKS_0
+ port
*4);
8825 DP(NETIF_MSG_IFDOWN
,
8826 "BRB1 is not empty %d blocks are occupied\n", val
);
8828 /* TODO: Close Doorbell port? */
8831 static int bnx2x_reset_hw(struct bnx2x
*bp
, u32 load_code
)
8833 struct bnx2x_func_state_params func_params
= {NULL
};
8835 /* Prepare parameters for function state transitions */
8836 __set_bit(RAMROD_COMP_WAIT
, &func_params
.ramrod_flags
);
8838 func_params
.f_obj
= &bp
->func_obj
;
8839 func_params
.cmd
= BNX2X_F_CMD_HW_RESET
;
8841 func_params
.params
.hw_init
.load_phase
= load_code
;
8843 return bnx2x_func_state_change(bp
, &func_params
);
8846 static int bnx2x_func_stop(struct bnx2x
*bp
)
8848 struct bnx2x_func_state_params func_params
= {NULL
};
8851 /* Prepare parameters for function state transitions */
8852 __set_bit(RAMROD_COMP_WAIT
, &func_params
.ramrod_flags
);
8853 func_params
.f_obj
= &bp
->func_obj
;
8854 func_params
.cmd
= BNX2X_F_CMD_STOP
;
8857 * Try to stop the function the 'good way'. If fails (in case
8858 * of a parity error during bnx2x_chip_cleanup()) and we are
8859 * not in a debug mode, perform a state transaction in order to
8860 * enable further HW_RESET transaction.
8862 rc
= bnx2x_func_state_change(bp
, &func_params
);
8864 #ifdef BNX2X_STOP_ON_ERROR
8867 BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry transaction\n");
8868 __set_bit(RAMROD_DRV_CLR_ONLY
, &func_params
.ramrod_flags
);
8869 return bnx2x_func_state_change(bp
, &func_params
);
8877 * bnx2x_send_unload_req - request unload mode from the MCP.
8879 * @bp: driver handle
8880 * @unload_mode: requested function's unload mode
8882 * Return unload mode returned by the MCP: COMMON, PORT or FUNC.
8884 u32
bnx2x_send_unload_req(struct bnx2x
*bp
, int unload_mode
)
8887 int port
= BP_PORT(bp
);
8889 /* Select the UNLOAD request mode */
8890 if (unload_mode
== UNLOAD_NORMAL
)
8891 reset_code
= DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS
;
8893 else if (bp
->flags
& NO_WOL_FLAG
)
8894 reset_code
= DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP
;
8897 u32 emac_base
= port
? GRCBASE_EMAC1
: GRCBASE_EMAC0
;
8898 u8
*mac_addr
= bp
->dev
->dev_addr
;
8899 struct pci_dev
*pdev
= bp
->pdev
;
8903 /* The mac address is written to entries 1-4 to
8904 * preserve entry 0 which is used by the PMF
8906 u8 entry
= (BP_VN(bp
) + 1)*8;
8908 val
= (mac_addr
[0] << 8) | mac_addr
[1];
8909 EMAC_WR(bp
, EMAC_REG_EMAC_MAC_MATCH
+ entry
, val
);
8911 val
= (mac_addr
[2] << 24) | (mac_addr
[3] << 16) |
8912 (mac_addr
[4] << 8) | mac_addr
[5];
8913 EMAC_WR(bp
, EMAC_REG_EMAC_MAC_MATCH
+ entry
+ 4, val
);
8915 /* Enable the PME and clear the status */
8916 pci_read_config_word(pdev
, pdev
->pm_cap
+ PCI_PM_CTRL
, &pmc
);
8917 pmc
|= PCI_PM_CTRL_PME_ENABLE
| PCI_PM_CTRL_PME_STATUS
;
8918 pci_write_config_word(pdev
, pdev
->pm_cap
+ PCI_PM_CTRL
, pmc
);
8920 reset_code
= DRV_MSG_CODE_UNLOAD_REQ_WOL_EN
;
8923 reset_code
= DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS
;
8925 /* Send the request to the MCP */
8927 reset_code
= bnx2x_fw_command(bp
, reset_code
, 0);
8929 int path
= BP_PATH(bp
);
8931 DP(NETIF_MSG_IFDOWN
, "NO MCP - load counts[%d] %d, %d, %d\n",
8932 path
, bnx2x_load_count
[path
][0], bnx2x_load_count
[path
][1],
8933 bnx2x_load_count
[path
][2]);
8934 bnx2x_load_count
[path
][0]--;
8935 bnx2x_load_count
[path
][1 + port
]--;
8936 DP(NETIF_MSG_IFDOWN
, "NO MCP - new load counts[%d] %d, %d, %d\n",
8937 path
, bnx2x_load_count
[path
][0], bnx2x_load_count
[path
][1],
8938 bnx2x_load_count
[path
][2]);
8939 if (bnx2x_load_count
[path
][0] == 0)
8940 reset_code
= FW_MSG_CODE_DRV_UNLOAD_COMMON
;
8941 else if (bnx2x_load_count
[path
][1 + port
] == 0)
8942 reset_code
= FW_MSG_CODE_DRV_UNLOAD_PORT
;
8944 reset_code
= FW_MSG_CODE_DRV_UNLOAD_FUNCTION
;
8951 * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP.
8953 * @bp: driver handle
8954 * @keep_link: true iff link should be kept up
8956 void bnx2x_send_unload_done(struct bnx2x
*bp
, bool keep_link
)
8958 u32 reset_param
= keep_link
? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET
: 0;
8960 /* Report UNLOAD_DONE to MCP */
8962 bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_DONE
, reset_param
);
8965 static int bnx2x_func_wait_started(struct bnx2x
*bp
)
8968 int msix
= (bp
->flags
& USING_MSIX_FLAG
) ? 1 : 0;
8974 * (assumption: No Attention from MCP at this stage)
8975 * PMF probably in the middle of TX disable/enable transaction
8976 * 1. Sync IRS for default SB
8977 * 2. Sync SP queue - this guarantees us that attention handling started
8978 * 3. Wait, that TX disable/enable transaction completes
8980 * 1+2 guarantee that if DCBx attention was scheduled it already changed
8981 * pending bit of transaction from STARTED-->TX_STOPPED, if we already
8982 * received completion for the transaction the state is TX_STOPPED.
8983 * State will return to STARTED after completion of TX_STOPPED-->STARTED
8987 /* make sure default SB ISR is done */
8989 synchronize_irq(bp
->msix_table
[0].vector
);
8991 synchronize_irq(bp
->pdev
->irq
);
8993 flush_workqueue(bnx2x_wq
);
8994 flush_workqueue(bnx2x_iov_wq
);
8996 while (bnx2x_func_get_state(bp
, &bp
->func_obj
) !=
8997 BNX2X_F_STATE_STARTED
&& tout
--)
9000 if (bnx2x_func_get_state(bp
, &bp
->func_obj
) !=
9001 BNX2X_F_STATE_STARTED
) {
9002 #ifdef BNX2X_STOP_ON_ERROR
9003 BNX2X_ERR("Wrong function state\n");
9007 * Failed to complete the transaction in a "good way"
9008 * Force both transactions with CLR bit
9010 struct bnx2x_func_state_params func_params
= {NULL
};
9012 DP(NETIF_MSG_IFDOWN
,
9013 "Hmmm... Unexpected function state! Forcing STARTED-->TX_ST0PPED-->STARTED\n");
9015 func_params
.f_obj
= &bp
->func_obj
;
9016 __set_bit(RAMROD_DRV_CLR_ONLY
,
9017 &func_params
.ramrod_flags
);
9019 /* STARTED-->TX_ST0PPED */
9020 func_params
.cmd
= BNX2X_F_CMD_TX_STOP
;
9021 bnx2x_func_state_change(bp
, &func_params
);
9023 /* TX_ST0PPED-->STARTED */
9024 func_params
.cmd
= BNX2X_F_CMD_TX_START
;
9025 return bnx2x_func_state_change(bp
, &func_params
);
9032 void bnx2x_chip_cleanup(struct bnx2x
*bp
, int unload_mode
, bool keep_link
)
9034 int port
= BP_PORT(bp
);
9037 struct bnx2x_mcast_ramrod_params rparam
= {NULL
};
9040 /* Wait until tx fastpath tasks complete */
9041 for_each_tx_queue(bp
, i
) {
9042 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
9044 for_each_cos_in_tx_queue(fp
, cos
)
9045 rc
= bnx2x_clean_tx_queue(bp
, fp
->txdata_ptr
[cos
]);
9046 #ifdef BNX2X_STOP_ON_ERROR
9052 /* Give HW time to discard old tx messages */
9053 usleep_range(1000, 2000);
9055 /* Clean all ETH MACs */
9056 rc
= bnx2x_del_all_macs(bp
, &bp
->sp_objs
[0].mac_obj
, BNX2X_ETH_MAC
,
9059 BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc
);
9061 /* Clean up UC list */
9062 rc
= bnx2x_del_all_macs(bp
, &bp
->sp_objs
[0].mac_obj
, BNX2X_UC_LIST_MAC
,
9065 BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n",
9069 if (!CHIP_IS_E1(bp
))
9070 REG_WR(bp
, NIG_REG_LLH0_FUNC_EN
+ port
*8, 0);
9072 /* Set "drop all" (stop Rx).
9073 * We need to take a netif_addr_lock() here in order to prevent
9074 * a race between the completion code and this code.
9076 netif_addr_lock_bh(bp
->dev
);
9077 /* Schedule the rx_mode command */
9078 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
))
9079 set_bit(BNX2X_FILTER_RX_MODE_SCHED
, &bp
->sp_state
);
9081 bnx2x_set_storm_rx_mode(bp
);
9083 /* Cleanup multicast configuration */
9084 rparam
.mcast_obj
= &bp
->mcast_obj
;
9085 rc
= bnx2x_config_mcast(bp
, &rparam
, BNX2X_MCAST_CMD_DEL
);
9087 BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc
);
9089 netif_addr_unlock_bh(bp
->dev
);
9091 bnx2x_iov_chip_cleanup(bp
);
9094 * Send the UNLOAD_REQUEST to the MCP. This will return if
9095 * this function should perform FUNC, PORT or COMMON HW
9098 reset_code
= bnx2x_send_unload_req(bp
, unload_mode
);
9101 * (assumption: No Attention from MCP at this stage)
9102 * PMF probably in the middle of TX disable/enable transaction
9104 rc
= bnx2x_func_wait_started(bp
);
9106 BNX2X_ERR("bnx2x_func_wait_started failed\n");
9107 #ifdef BNX2X_STOP_ON_ERROR
9112 /* Close multi and leading connections
9113 * Completions for ramrods are collected in a synchronous way
9115 for_each_eth_queue(bp
, i
)
9116 if (bnx2x_stop_queue(bp
, i
))
9117 #ifdef BNX2X_STOP_ON_ERROR
9123 if (CNIC_LOADED(bp
)) {
9124 for_each_cnic_queue(bp
, i
)
9125 if (bnx2x_stop_queue(bp
, i
))
9126 #ifdef BNX2X_STOP_ON_ERROR
9133 /* If SP settings didn't get completed so far - something
9134 * very wrong has happen.
9136 if (!bnx2x_wait_sp_comp(bp
, ~0x0UL
))
9137 BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n");
9139 #ifndef BNX2X_STOP_ON_ERROR
9142 rc
= bnx2x_func_stop(bp
);
9144 BNX2X_ERR("Function stop failed!\n");
9145 #ifdef BNX2X_STOP_ON_ERROR
9150 /* Disable HW interrupts, NAPI */
9151 bnx2x_netif_stop(bp
, 1);
9152 /* Delete all NAPI objects */
9153 bnx2x_del_all_napi(bp
);
9154 if (CNIC_LOADED(bp
))
9155 bnx2x_del_all_napi_cnic(bp
);
9160 /* Reset the chip */
9161 rc
= bnx2x_reset_hw(bp
, reset_code
);
9163 BNX2X_ERR("HW_RESET failed\n");
9165 /* Report UNLOAD_DONE to MCP */
9166 bnx2x_send_unload_done(bp
, keep_link
);
9169 void bnx2x_disable_close_the_gate(struct bnx2x
*bp
)
9173 DP(NETIF_MSG_IFDOWN
, "Disabling \"close the gates\"\n");
9175 if (CHIP_IS_E1(bp
)) {
9176 int port
= BP_PORT(bp
);
9177 u32 addr
= port
? MISC_REG_AEU_MASK_ATTN_FUNC_1
:
9178 MISC_REG_AEU_MASK_ATTN_FUNC_0
;
9180 val
= REG_RD(bp
, addr
);
9182 REG_WR(bp
, addr
, val
);
9184 val
= REG_RD(bp
, MISC_REG_AEU_GENERAL_MASK
);
9185 val
&= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK
|
9186 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK
);
9187 REG_WR(bp
, MISC_REG_AEU_GENERAL_MASK
, val
);
9191 /* Close gates #2, #3 and #4: */
9192 static void bnx2x_set_234_gates(struct bnx2x
*bp
, bool close
)
9196 /* Gates #2 and #4a are closed/opened for "not E1" only */
9197 if (!CHIP_IS_E1(bp
)) {
9199 REG_WR(bp
, PXP_REG_HST_DISCARD_DOORBELLS
, !!close
);
9201 REG_WR(bp
, PXP_REG_HST_DISCARD_INTERNAL_WRITES
, !!close
);
9205 if (CHIP_IS_E1x(bp
)) {
9206 /* Prevent interrupts from HC on both ports */
9207 val
= REG_RD(bp
, HC_REG_CONFIG_1
);
9208 REG_WR(bp
, HC_REG_CONFIG_1
,
9209 (!close
) ? (val
| HC_CONFIG_1_REG_BLOCK_DISABLE_1
) :
9210 (val
& ~(u32
)HC_CONFIG_1_REG_BLOCK_DISABLE_1
));
9212 val
= REG_RD(bp
, HC_REG_CONFIG_0
);
9213 REG_WR(bp
, HC_REG_CONFIG_0
,
9214 (!close
) ? (val
| HC_CONFIG_0_REG_BLOCK_DISABLE_0
) :
9215 (val
& ~(u32
)HC_CONFIG_0_REG_BLOCK_DISABLE_0
));
9217 /* Prevent incoming interrupts in IGU */
9218 val
= REG_RD(bp
, IGU_REG_BLOCK_CONFIGURATION
);
9220 REG_WR(bp
, IGU_REG_BLOCK_CONFIGURATION
,
9222 (val
| IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE
) :
9223 (val
& ~(u32
)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE
));
9226 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
, "%s gates #2, #3 and #4\n",
9227 close
? "closing" : "opening");
9231 #define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */
9233 static void bnx2x_clp_reset_prep(struct bnx2x
*bp
, u32
*magic_val
)
9235 /* Do some magic... */
9236 u32 val
= MF_CFG_RD(bp
, shared_mf_config
.clp_mb
);
9237 *magic_val
= val
& SHARED_MF_CLP_MAGIC
;
9238 MF_CFG_WR(bp
, shared_mf_config
.clp_mb
, val
| SHARED_MF_CLP_MAGIC
);
9242 * bnx2x_clp_reset_done - restore the value of the `magic' bit.
9244 * @bp: driver handle
9245 * @magic_val: old value of the `magic' bit.
9247 static void bnx2x_clp_reset_done(struct bnx2x
*bp
, u32 magic_val
)
9249 /* Restore the `magic' bit value... */
9250 u32 val
= MF_CFG_RD(bp
, shared_mf_config
.clp_mb
);
9251 MF_CFG_WR(bp
, shared_mf_config
.clp_mb
,
9252 (val
& (~SHARED_MF_CLP_MAGIC
)) | magic_val
);
9256 * bnx2x_reset_mcp_prep - prepare for MCP reset.
9258 * @bp: driver handle
9259 * @magic_val: old value of 'magic' bit.
9261 * Takes care of CLP configurations.
9263 static void bnx2x_reset_mcp_prep(struct bnx2x
*bp
, u32
*magic_val
)
9266 u32 validity_offset
;
9268 DP(NETIF_MSG_HW
| NETIF_MSG_IFUP
, "Starting\n");
9270 /* Set `magic' bit in order to save MF config */
9271 if (!CHIP_IS_E1(bp
))
9272 bnx2x_clp_reset_prep(bp
, magic_val
);
9274 /* Get shmem offset */
9275 shmem
= REG_RD(bp
, MISC_REG_SHARED_MEM_ADDR
);
9277 offsetof(struct shmem_region
, validity_map
[BP_PORT(bp
)]);
9279 /* Clear validity map flags */
9281 REG_WR(bp
, shmem
+ validity_offset
, 0);
9284 #define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
9285 #define MCP_ONE_TIMEOUT 100 /* 100 ms */
9288 * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT
9290 * @bp: driver handle
9292 static void bnx2x_mcp_wait_one(struct bnx2x
*bp
)
9294 /* special handling for emulation and FPGA,
9295 wait 10 times longer */
9296 if (CHIP_REV_IS_SLOW(bp
))
9297 msleep(MCP_ONE_TIMEOUT
*10);
9299 msleep(MCP_ONE_TIMEOUT
);
9303 * initializes bp->common.shmem_base and waits for validity signature to appear
9305 static int bnx2x_init_shmem(struct bnx2x
*bp
)
9311 bp
->common
.shmem_base
= REG_RD(bp
, MISC_REG_SHARED_MEM_ADDR
);
9312 if (bp
->common
.shmem_base
) {
9313 val
= SHMEM_RD(bp
, validity_map
[BP_PORT(bp
)]);
9314 if (val
& SHR_MEM_VALIDITY_MB
)
9318 bnx2x_mcp_wait_one(bp
);
9320 } while (cnt
++ < (MCP_TIMEOUT
/ MCP_ONE_TIMEOUT
));
9322 BNX2X_ERR("BAD MCP validity signature\n");
9327 static int bnx2x_reset_mcp_comp(struct bnx2x
*bp
, u32 magic_val
)
9329 int rc
= bnx2x_init_shmem(bp
);
9331 /* Restore the `magic' bit value */
9332 if (!CHIP_IS_E1(bp
))
9333 bnx2x_clp_reset_done(bp
, magic_val
);
9338 static void bnx2x_pxp_prep(struct bnx2x
*bp
)
9340 if (!CHIP_IS_E1(bp
)) {
9341 REG_WR(bp
, PXP2_REG_RD_START_INIT
, 0);
9342 REG_WR(bp
, PXP2_REG_RQ_RBC_DONE
, 0);
9348 * Reset the whole chip except for:
9350 * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by
9353 * - MISC (including AEU)
9357 static void bnx2x_process_kill_chip_reset(struct bnx2x
*bp
, bool global
)
9359 u32 not_reset_mask1
, reset_mask1
, not_reset_mask2
, reset_mask2
;
9360 u32 global_bits2
, stay_reset2
;
9363 * Bits that have to be set in reset_mask2 if we want to reset 'global'
9364 * (per chip) blocks.
9367 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU
|
9368 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE
;
9370 /* Don't reset the following blocks.
9371 * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
9372 * reset, as in 4 port device they might still be owned
9373 * by the MCP (there is only one leader per path).
9376 MISC_REGISTERS_RESET_REG_1_RST_HC
|
9377 MISC_REGISTERS_RESET_REG_1_RST_PXPV
|
9378 MISC_REGISTERS_RESET_REG_1_RST_PXP
;
9381 MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO
|
9382 MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE
|
9383 MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE
|
9384 MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE
|
9385 MISC_REGISTERS_RESET_REG_2_RST_RBCN
|
9386 MISC_REGISTERS_RESET_REG_2_RST_GRC
|
9387 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE
|
9388 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B
|
9389 MISC_REGISTERS_RESET_REG_2_RST_ATC
|
9390 MISC_REGISTERS_RESET_REG_2_PGLC
|
9391 MISC_REGISTERS_RESET_REG_2_RST_BMAC0
|
9392 MISC_REGISTERS_RESET_REG_2_RST_BMAC1
|
9393 MISC_REGISTERS_RESET_REG_2_RST_EMAC0
|
9394 MISC_REGISTERS_RESET_REG_2_RST_EMAC1
|
9395 MISC_REGISTERS_RESET_REG_2_UMAC0
|
9396 MISC_REGISTERS_RESET_REG_2_UMAC1
;
9399 * Keep the following blocks in reset:
9400 * - all xxMACs are handled by the bnx2x_link code.
9403 MISC_REGISTERS_RESET_REG_2_XMAC
|
9404 MISC_REGISTERS_RESET_REG_2_XMAC_SOFT
;
9406 /* Full reset masks according to the chip */
9407 reset_mask1
= 0xffffffff;
9410 reset_mask2
= 0xffff;
9411 else if (CHIP_IS_E1H(bp
))
9412 reset_mask2
= 0x1ffff;
9413 else if (CHIP_IS_E2(bp
))
9414 reset_mask2
= 0xfffff;
9415 else /* CHIP_IS_E3 */
9416 reset_mask2
= 0x3ffffff;
9418 /* Don't reset global blocks unless we need to */
9420 reset_mask2
&= ~global_bits2
;
9423 * In case of attention in the QM, we need to reset PXP
9424 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
9425 * because otherwise QM reset would release 'close the gates' shortly
9426 * before resetting the PXP, then the PSWRQ would send a write
9427 * request to PGLUE. Then when PXP is reset, PGLUE would try to
9428 * read the payload data from PSWWR, but PSWWR would not
9429 * respond. The write queue in PGLUE would stuck, dmae commands
9430 * would not return. Therefore it's important to reset the second
9431 * reset register (containing the
9432 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
9433 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
9436 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_2_CLEAR
,
9437 reset_mask2
& (~not_reset_mask2
));
9439 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_CLEAR
,
9440 reset_mask1
& (~not_reset_mask1
));
9445 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_2_SET
,
9446 reset_mask2
& (~stay_reset2
));
9451 REG_WR(bp
, GRCBASE_MISC
+ MISC_REGISTERS_RESET_REG_1_SET
, reset_mask1
);
9456 * bnx2x_er_poll_igu_vq - poll for pending writes bit.
9457 * It should get cleared in no more than 1s.
9459 * @bp: driver handle
9461 * It should get cleared in no more than 1s. Returns 0 if
9462 * pending writes bit gets cleared.
9464 static int bnx2x_er_poll_igu_vq(struct bnx2x
*bp
)
9470 pend_bits
= REG_RD(bp
, IGU_REG_PENDING_BITS_STATUS
);
9475 usleep_range(1000, 2000);
9476 } while (cnt
-- > 0);
9479 BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n",
9487 static int bnx2x_process_kill(struct bnx2x
*bp
, bool global
)
9491 u32 sr_cnt
, blk_cnt
, port_is_idle_0
, port_is_idle_1
, pgl_exp_rom2
;
9494 /* Empty the Tetris buffer, wait for 1s */
9496 sr_cnt
= REG_RD(bp
, PXP2_REG_RD_SR_CNT
);
9497 blk_cnt
= REG_RD(bp
, PXP2_REG_RD_BLK_CNT
);
9498 port_is_idle_0
= REG_RD(bp
, PXP2_REG_RD_PORT_IS_IDLE_0
);
9499 port_is_idle_1
= REG_RD(bp
, PXP2_REG_RD_PORT_IS_IDLE_1
);
9500 pgl_exp_rom2
= REG_RD(bp
, PXP2_REG_PGL_EXP_ROM2
);
9502 tags_63_32
= REG_RD(bp
, PGLUE_B_REG_TAGS_63_32
);
9504 if ((sr_cnt
== 0x7e) && (blk_cnt
== 0xa0) &&
9505 ((port_is_idle_0
& 0x1) == 0x1) &&
9506 ((port_is_idle_1
& 0x1) == 0x1) &&
9507 (pgl_exp_rom2
== 0xffffffff) &&
9508 (!CHIP_IS_E3(bp
) || (tags_63_32
== 0xffffffff)))
9510 usleep_range(1000, 2000);
9511 } while (cnt
-- > 0);
9514 BNX2X_ERR("Tetris buffer didn't get empty or there are still outstanding read requests after 1s!\n");
9515 BNX2X_ERR("sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n",
9516 sr_cnt
, blk_cnt
, port_is_idle_0
, port_is_idle_1
,
9523 /* Close gates #2, #3 and #4 */
9524 bnx2x_set_234_gates(bp
, true);
9526 /* Poll for IGU VQs for 57712 and newer chips */
9527 if (!CHIP_IS_E1x(bp
) && bnx2x_er_poll_igu_vq(bp
))
9530 /* TBD: Indicate that "process kill" is in progress to MCP */
9532 /* Clear "unprepared" bit */
9533 REG_WR(bp
, MISC_REG_UNPREPARED
, 0);
9536 /* Make sure all is written to the chip before the reset */
9539 /* Wait for 1ms to empty GLUE and PCI-E core queues,
9540 * PSWHST, GRC and PSWRD Tetris buffer.
9542 usleep_range(1000, 2000);
9544 /* Prepare to chip reset: */
9547 bnx2x_reset_mcp_prep(bp
, &val
);
9553 /* reset the chip */
9554 bnx2x_process_kill_chip_reset(bp
, global
);
9557 /* clear errors in PGB */
9558 if (!CHIP_IS_E1x(bp
))
9559 REG_WR(bp
, PGLUE_B_REG_LATCHED_ERRORS_CLR
, 0x7f);
9561 /* Recover after reset: */
9563 if (global
&& bnx2x_reset_mcp_comp(bp
, val
))
9566 /* TBD: Add resetting the NO_MCP mode DB here */
9568 /* Open the gates #2, #3 and #4 */
9569 bnx2x_set_234_gates(bp
, false);
9571 /* TBD: IGU/AEU preparation bring back the AEU/IGU to a
9572 * reset state, re-enable attentions. */
9577 static int bnx2x_leader_reset(struct bnx2x
*bp
)
9580 bool global
= bnx2x_reset_is_global(bp
);
9583 /* if not going to reset MCP - load "fake" driver to reset HW while
9584 * driver is owner of the HW
9586 if (!global
&& !BP_NOMCP(bp
)) {
9587 load_code
= bnx2x_fw_command(bp
, DRV_MSG_CODE_LOAD_REQ
,
9588 DRV_MSG_CODE_LOAD_REQ_WITH_LFA
);
9590 BNX2X_ERR("MCP response failure, aborting\n");
9592 goto exit_leader_reset
;
9594 if ((load_code
!= FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
) &&
9595 (load_code
!= FW_MSG_CODE_DRV_LOAD_COMMON
)) {
9596 BNX2X_ERR("MCP unexpected resp, aborting\n");
9598 goto exit_leader_reset2
;
9600 load_code
= bnx2x_fw_command(bp
, DRV_MSG_CODE_LOAD_DONE
, 0);
9602 BNX2X_ERR("MCP response failure, aborting\n");
9604 goto exit_leader_reset2
;
9608 /* Try to recover after the failure */
9609 if (bnx2x_process_kill(bp
, global
)) {
9610 BNX2X_ERR("Something bad had happen on engine %d! Aii!\n",
9613 goto exit_leader_reset2
;
9617 * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver
9620 bnx2x_set_reset_done(bp
);
9622 bnx2x_clear_reset_global(bp
);
9625 /* unload "fake driver" if it was loaded */
9626 if (!global
&& !BP_NOMCP(bp
)) {
9627 bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP
, 0);
9628 bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_DONE
, 0);
9632 bnx2x_release_leader_lock(bp
);
9637 static void bnx2x_recovery_failed(struct bnx2x
*bp
)
9639 netdev_err(bp
->dev
, "Recovery has failed. Power cycle is needed.\n");
9641 /* Disconnect this device */
9642 netif_device_detach(bp
->dev
);
9645 * Block ifup for all function on this engine until "process kill"
9648 bnx2x_set_reset_in_progress(bp
);
9650 /* Shut down the power */
9651 bnx2x_set_power_state(bp
, PCI_D3hot
);
9653 bp
->recovery_state
= BNX2X_RECOVERY_FAILED
;
9659 * Assumption: runs under rtnl lock. This together with the fact
9660 * that it's called only from bnx2x_sp_rtnl() ensure that it
9661 * will never be called when netif_running(bp->dev) is false.
9663 static void bnx2x_parity_recover(struct bnx2x
*bp
)
9665 bool global
= false;
9666 u32 error_recovered
, error_unrecovered
;
9669 DP(NETIF_MSG_HW
, "Handling parity\n");
9671 switch (bp
->recovery_state
) {
9672 case BNX2X_RECOVERY_INIT
:
9673 DP(NETIF_MSG_HW
, "State is BNX2X_RECOVERY_INIT\n");
9674 is_parity
= bnx2x_chk_parity_attn(bp
, &global
, false);
9675 WARN_ON(!is_parity
);
9677 /* Try to get a LEADER_LOCK HW lock */
9678 if (bnx2x_trylock_leader_lock(bp
)) {
9679 bnx2x_set_reset_in_progress(bp
);
9681 * Check if there is a global attention and if
9682 * there was a global attention, set the global
9687 bnx2x_set_reset_global(bp
);
9692 /* Stop the driver */
9693 /* If interface has been removed - break */
9694 if (bnx2x_nic_unload(bp
, UNLOAD_RECOVERY
, false))
9697 bp
->recovery_state
= BNX2X_RECOVERY_WAIT
;
9699 /* Ensure "is_leader", MCP command sequence and
9700 * "recovery_state" update values are seen on other
9706 case BNX2X_RECOVERY_WAIT
:
9707 DP(NETIF_MSG_HW
, "State is BNX2X_RECOVERY_WAIT\n");
9708 if (bp
->is_leader
) {
9709 int other_engine
= BP_PATH(bp
) ? 0 : 1;
9710 bool other_load_status
=
9711 bnx2x_get_load_status(bp
, other_engine
);
9713 bnx2x_get_load_status(bp
, BP_PATH(bp
));
9714 global
= bnx2x_reset_is_global(bp
);
9717 * In case of a parity in a global block, let
9718 * the first leader that performs a
9719 * leader_reset() reset the global blocks in
9720 * order to clear global attentions. Otherwise
9721 * the gates will remain closed for that
9725 (global
&& other_load_status
)) {
9726 /* Wait until all other functions get
9729 schedule_delayed_work(&bp
->sp_rtnl_task
,
9733 /* If all other functions got down -
9734 * try to bring the chip back to
9735 * normal. In any case it's an exit
9736 * point for a leader.
9738 if (bnx2x_leader_reset(bp
)) {
9739 bnx2x_recovery_failed(bp
);
9743 /* If we are here, means that the
9744 * leader has succeeded and doesn't
9745 * want to be a leader any more. Try
9746 * to continue as a none-leader.
9750 } else { /* non-leader */
9751 if (!bnx2x_reset_is_done(bp
, BP_PATH(bp
))) {
9752 /* Try to get a LEADER_LOCK HW lock as
9753 * long as a former leader may have
9754 * been unloaded by the user or
9755 * released a leadership by another
9758 if (bnx2x_trylock_leader_lock(bp
)) {
9759 /* I'm a leader now! Restart a
9766 schedule_delayed_work(&bp
->sp_rtnl_task
,
9772 * If there was a global attention, wait
9773 * for it to be cleared.
9775 if (bnx2x_reset_is_global(bp
)) {
9776 schedule_delayed_work(
9783 bp
->eth_stats
.recoverable_error
;
9785 bp
->eth_stats
.unrecoverable_error
;
9786 bp
->recovery_state
=
9787 BNX2X_RECOVERY_NIC_LOADING
;
9788 if (bnx2x_nic_load(bp
, LOAD_NORMAL
)) {
9789 error_unrecovered
++;
9791 "Recovery failed. Power cycle needed\n");
9792 /* Disconnect this device */
9793 netif_device_detach(bp
->dev
);
9794 /* Shut down the power */
9795 bnx2x_set_power_state(
9799 bp
->recovery_state
=
9800 BNX2X_RECOVERY_DONE
;
9804 bp
->eth_stats
.recoverable_error
=
9806 bp
->eth_stats
.unrecoverable_error
=
9818 static int bnx2x_close(struct net_device
*dev
);
9820 /* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is
9821 * scheduled on a general queue in order to prevent a dead lock.
9823 static void bnx2x_sp_rtnl_task(struct work_struct
*work
)
9825 struct bnx2x
*bp
= container_of(work
, struct bnx2x
, sp_rtnl_task
.work
);
9829 if (!netif_running(bp
->dev
)) {
9834 if (unlikely(bp
->recovery_state
!= BNX2X_RECOVERY_DONE
)) {
9835 #ifdef BNX2X_STOP_ON_ERROR
9836 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n"
9837 "you will need to reboot when done\n");
9838 goto sp_rtnl_not_reset
;
9841 * Clear all pending SP commands as we are going to reset the
9844 bp
->sp_rtnl_state
= 0;
9847 bnx2x_parity_recover(bp
);
9853 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT
, &bp
->sp_rtnl_state
)) {
9854 #ifdef BNX2X_STOP_ON_ERROR
9855 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n"
9856 "you will need to reboot when done\n");
9857 goto sp_rtnl_not_reset
;
9861 * Clear all pending SP commands as we are going to reset the
9864 bp
->sp_rtnl_state
= 0;
9867 bnx2x_nic_unload(bp
, UNLOAD_NORMAL
, true);
9868 bnx2x_nic_load(bp
, LOAD_NORMAL
);
9873 #ifdef BNX2X_STOP_ON_ERROR
9876 if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC
, &bp
->sp_rtnl_state
))
9877 bnx2x_setup_tc(bp
->dev
, bp
->dcbx_port_params
.ets
.num_of_cos
);
9878 if (test_and_clear_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE
, &bp
->sp_rtnl_state
))
9879 bnx2x_after_function_update(bp
);
9881 * in case of fan failure we need to reset id if the "stop on error"
9882 * debug flag is set, since we trying to prevent permanent overheating
9885 if (test_and_clear_bit(BNX2X_SP_RTNL_FAN_FAILURE
, &bp
->sp_rtnl_state
)) {
9886 DP(NETIF_MSG_HW
, "fan failure detected. Unloading driver\n");
9887 netif_device_detach(bp
->dev
);
9888 bnx2x_close(bp
->dev
);
9893 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST
, &bp
->sp_rtnl_state
)) {
9895 "sending set mcast vf pf channel message from rtnl sp-task\n");
9896 bnx2x_vfpf_set_mcast(bp
->dev
);
9898 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN
,
9899 &bp
->sp_rtnl_state
)){
9900 if (!test_bit(__LINK_STATE_NOCARRIER
, &bp
->dev
->state
)) {
9901 bnx2x_tx_disable(bp
);
9902 BNX2X_ERR("PF indicated channel is not servicable anymore. This means this VF device is no longer operational\n");
9906 if (test_and_clear_bit(BNX2X_SP_RTNL_RX_MODE
, &bp
->sp_rtnl_state
)) {
9907 DP(BNX2X_MSG_SP
, "Handling Rx Mode setting\n");
9908 bnx2x_set_rx_mode_inner(bp
);
9911 if (test_and_clear_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN
,
9912 &bp
->sp_rtnl_state
))
9913 bnx2x_pf_set_vfs_vlan(bp
);
9915 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP
, &bp
->sp_rtnl_state
)) {
9916 bnx2x_dcbx_stop_hw_tx(bp
);
9917 bnx2x_dcbx_resume_hw_tx(bp
);
9920 if (test_and_clear_bit(BNX2X_SP_RTNL_GET_DRV_VERSION
,
9921 &bp
->sp_rtnl_state
))
9922 bnx2x_update_mng_version(bp
);
9924 /* work which needs rtnl lock not-taken (as it takes the lock itself and
9925 * can be called from other contexts as well)
9929 /* enable SR-IOV if applicable */
9930 if (IS_SRIOV(bp
) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV
,
9931 &bp
->sp_rtnl_state
)) {
9932 bnx2x_disable_sriov(bp
);
9933 bnx2x_enable_sriov(bp
);
9937 static void bnx2x_period_task(struct work_struct
*work
)
9939 struct bnx2x
*bp
= container_of(work
, struct bnx2x
, period_task
.work
);
9941 if (!netif_running(bp
->dev
))
9942 goto period_task_exit
;
9944 if (CHIP_REV_IS_SLOW(bp
)) {
9945 BNX2X_ERR("period task called on emulation, ignoring\n");
9946 goto period_task_exit
;
9949 bnx2x_acquire_phy_lock(bp
);
9951 * The barrier is needed to ensure the ordering between the writing to
9952 * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
9957 bnx2x_period_func(&bp
->link_params
, &bp
->link_vars
);
9959 /* Re-queue task in 1 sec */
9960 queue_delayed_work(bnx2x_wq
, &bp
->period_task
, 1*HZ
);
9963 bnx2x_release_phy_lock(bp
);
9969 * Init service functions
9972 static u32
bnx2x_get_pretend_reg(struct bnx2x
*bp
)
9974 u32 base
= PXP2_REG_PGL_PRETEND_FUNC_F0
;
9975 u32 stride
= PXP2_REG_PGL_PRETEND_FUNC_F1
- base
;
9976 return base
+ (BP_ABS_FUNC(bp
)) * stride
;
9979 static void bnx2x_prev_unload_close_mac(struct bnx2x
*bp
,
9980 struct bnx2x_mac_vals
*vals
)
9982 u32 val
, base_addr
, offset
, mask
, reset_reg
;
9983 bool mac_stopped
= false;
9984 u8 port
= BP_PORT(bp
);
9986 /* reset addresses as they also mark which values were changed */
9987 vals
->bmac_addr
= 0;
9988 vals
->umac_addr
= 0;
9989 vals
->xmac_addr
= 0;
9990 vals
->emac_addr
= 0;
9992 reset_reg
= REG_RD(bp
, MISC_REG_RESET_REG_2
);
9994 if (!CHIP_IS_E3(bp
)) {
9995 val
= REG_RD(bp
, NIG_REG_BMAC0_REGS_OUT_EN
+ port
* 4);
9996 mask
= MISC_REGISTERS_RESET_REG_2_RST_BMAC0
<< port
;
9997 if ((mask
& reset_reg
) && val
) {
9999 BNX2X_DEV_INFO("Disable bmac Rx\n");
10000 base_addr
= BP_PORT(bp
) ? NIG_REG_INGRESS_BMAC1_MEM
10001 : NIG_REG_INGRESS_BMAC0_MEM
;
10002 offset
= CHIP_IS_E2(bp
) ? BIGMAC2_REGISTER_BMAC_CONTROL
10003 : BIGMAC_REGISTER_BMAC_CONTROL
;
10006 * use rd/wr since we cannot use dmae. This is safe
10007 * since MCP won't access the bus due to the request
10008 * to unload, and no function on the path can be
10009 * loaded at this time.
10011 wb_data
[0] = REG_RD(bp
, base_addr
+ offset
);
10012 wb_data
[1] = REG_RD(bp
, base_addr
+ offset
+ 0x4);
10013 vals
->bmac_addr
= base_addr
+ offset
;
10014 vals
->bmac_val
[0] = wb_data
[0];
10015 vals
->bmac_val
[1] = wb_data
[1];
10016 wb_data
[0] &= ~BMAC_CONTROL_RX_ENABLE
;
10017 REG_WR(bp
, vals
->bmac_addr
, wb_data
[0]);
10018 REG_WR(bp
, vals
->bmac_addr
+ 0x4, wb_data
[1]);
10020 BNX2X_DEV_INFO("Disable emac Rx\n");
10021 vals
->emac_addr
= NIG_REG_NIG_EMAC0_EN
+ BP_PORT(bp
)*4;
10022 vals
->emac_val
= REG_RD(bp
, vals
->emac_addr
);
10023 REG_WR(bp
, vals
->emac_addr
, 0);
10024 mac_stopped
= true;
10026 if (reset_reg
& MISC_REGISTERS_RESET_REG_2_XMAC
) {
10027 BNX2X_DEV_INFO("Disable xmac Rx\n");
10028 base_addr
= BP_PORT(bp
) ? GRCBASE_XMAC1
: GRCBASE_XMAC0
;
10029 val
= REG_RD(bp
, base_addr
+ XMAC_REG_PFC_CTRL_HI
);
10030 REG_WR(bp
, base_addr
+ XMAC_REG_PFC_CTRL_HI
,
10032 REG_WR(bp
, base_addr
+ XMAC_REG_PFC_CTRL_HI
,
10034 vals
->xmac_addr
= base_addr
+ XMAC_REG_CTRL
;
10035 vals
->xmac_val
= REG_RD(bp
, vals
->xmac_addr
);
10036 REG_WR(bp
, vals
->xmac_addr
, 0);
10037 mac_stopped
= true;
10039 mask
= MISC_REGISTERS_RESET_REG_2_UMAC0
<< port
;
10040 if (mask
& reset_reg
) {
10041 BNX2X_DEV_INFO("Disable umac Rx\n");
10042 base_addr
= BP_PORT(bp
) ? GRCBASE_UMAC1
: GRCBASE_UMAC0
;
10043 vals
->umac_addr
= base_addr
+ UMAC_REG_COMMAND_CONFIG
;
10044 vals
->umac_val
= REG_RD(bp
, vals
->umac_addr
);
10045 REG_WR(bp
, vals
->umac_addr
, 0);
10046 mac_stopped
= true;
10054 #define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
10055 #define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
10056 #define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
10057 #define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
10059 #define BCM_5710_UNDI_FW_MF_MAJOR (0x07)
10060 #define BCM_5710_UNDI_FW_MF_MINOR (0x08)
10061 #define BCM_5710_UNDI_FW_MF_VERS (0x05)
10062 #define BNX2X_PREV_UNDI_MF_PORT(p) (BAR_TSTRORM_INTMEM + 0x150c + ((p) << 4))
10063 #define BNX2X_PREV_UNDI_MF_FUNC(f) (BAR_TSTRORM_INTMEM + 0x184c + ((f) << 4))
10065 static bool bnx2x_prev_is_after_undi(struct bnx2x
*bp
)
10067 /* UNDI marks its presence in DORQ -
10068 * it initializes CID offset for normal bell to 0x7
10070 if (!(REG_RD(bp
, MISC_REG_RESET_REG_1
) &
10071 MISC_REGISTERS_RESET_REG_1_RST_DORQ
))
10074 if (REG_RD(bp
, DORQ_REG_NORM_CID_OFST
) == 0x7) {
10075 BNX2X_DEV_INFO("UNDI previously loaded\n");
10082 static bool bnx2x_prev_unload_undi_fw_supports_mf(struct bnx2x
*bp
)
10084 u8 major
, minor
, version
;
10087 /* Must check that FW is loaded */
10088 if (!(REG_RD(bp
, MISC_REG_RESET_REG_1
) &
10089 MISC_REGISTERS_RESET_REG_1_RST_XSEM
)) {
10090 BNX2X_DEV_INFO("XSEM is reset - UNDI MF FW is not loaded\n");
10094 /* Read Currently loaded FW version */
10095 fw
= REG_RD(bp
, XSEM_REG_PRAM
);
10097 minor
= (fw
>> 0x8) & 0xff;
10098 version
= (fw
>> 0x10) & 0xff;
10099 BNX2X_DEV_INFO("Loaded FW: 0x%08x: Major 0x%02x Minor 0x%02x Version 0x%02x\n",
10100 fw
, major
, minor
, version
);
10102 if (major
> BCM_5710_UNDI_FW_MF_MAJOR
)
10105 if ((major
== BCM_5710_UNDI_FW_MF_MAJOR
) &&
10106 (minor
> BCM_5710_UNDI_FW_MF_MINOR
))
10109 if ((major
== BCM_5710_UNDI_FW_MF_MAJOR
) &&
10110 (minor
== BCM_5710_UNDI_FW_MF_MINOR
) &&
10111 (version
>= BCM_5710_UNDI_FW_MF_VERS
))
10117 static void bnx2x_prev_unload_undi_mf(struct bnx2x
*bp
)
10121 /* Due to legacy (FW) code, the first function on each engine has a
10122 * different offset macro from the rest of the functions.
10123 * Setting this for all 8 functions is harmless regardless of whether
10124 * this is actually a multi-function device.
10126 for (i
= 0; i
< 2; i
++)
10127 REG_WR(bp
, BNX2X_PREV_UNDI_MF_PORT(i
), 1);
10129 for (i
= 2; i
< 8; i
++)
10130 REG_WR(bp
, BNX2X_PREV_UNDI_MF_FUNC(i
- 2), 1);
10132 BNX2X_DEV_INFO("UNDI FW (MF) set to discard\n");
10135 static void bnx2x_prev_unload_undi_inc(struct bnx2x
*bp
, u8 port
, u8 inc
)
10138 u32 tmp_reg
= REG_RD(bp
, BNX2X_PREV_UNDI_PROD_ADDR(port
));
10140 rcq
= BNX2X_PREV_UNDI_RCQ(tmp_reg
) + inc
;
10141 bd
= BNX2X_PREV_UNDI_BD(tmp_reg
) + inc
;
10143 tmp_reg
= BNX2X_PREV_UNDI_PROD(rcq
, bd
);
10144 REG_WR(bp
, BNX2X_PREV_UNDI_PROD_ADDR(port
), tmp_reg
);
10146 BNX2X_DEV_INFO("UNDI producer [%d] rings bd -> 0x%04x, rcq -> 0x%04x\n",
10150 static int bnx2x_prev_mcp_done(struct bnx2x
*bp
)
10152 u32 rc
= bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_DONE
,
10153 DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET
);
10155 BNX2X_ERR("MCP response failure, aborting\n");
10162 static struct bnx2x_prev_path_list
*
10163 bnx2x_prev_path_get_entry(struct bnx2x
*bp
)
10165 struct bnx2x_prev_path_list
*tmp_list
;
10167 list_for_each_entry(tmp_list
, &bnx2x_prev_list
, list
)
10168 if (PCI_SLOT(bp
->pdev
->devfn
) == tmp_list
->slot
&&
10169 bp
->pdev
->bus
->number
== tmp_list
->bus
&&
10170 BP_PATH(bp
) == tmp_list
->path
)
10176 static int bnx2x_prev_path_mark_eeh(struct bnx2x
*bp
)
10178 struct bnx2x_prev_path_list
*tmp_list
;
10181 rc
= down_interruptible(&bnx2x_prev_sem
);
10183 BNX2X_ERR("Received %d when tried to take lock\n", rc
);
10187 tmp_list
= bnx2x_prev_path_get_entry(bp
);
10192 BNX2X_ERR("path %d: Entry does not exist for eeh; Flow occurs before initial insmod is over ?\n",
10196 up(&bnx2x_prev_sem
);
10201 static bool bnx2x_prev_is_path_marked(struct bnx2x
*bp
)
10203 struct bnx2x_prev_path_list
*tmp_list
;
10206 if (down_trylock(&bnx2x_prev_sem
))
10209 tmp_list
= bnx2x_prev_path_get_entry(bp
);
10211 if (tmp_list
->aer
) {
10212 DP(NETIF_MSG_HW
, "Path %d was marked by AER\n",
10216 BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n",
10221 up(&bnx2x_prev_sem
);
10226 bool bnx2x_port_after_undi(struct bnx2x
*bp
)
10228 struct bnx2x_prev_path_list
*entry
;
10231 down(&bnx2x_prev_sem
);
10233 entry
= bnx2x_prev_path_get_entry(bp
);
10234 val
= !!(entry
&& (entry
->undi
& (1 << BP_PORT(bp
))));
10236 up(&bnx2x_prev_sem
);
10241 static int bnx2x_prev_mark_path(struct bnx2x
*bp
, bool after_undi
)
10243 struct bnx2x_prev_path_list
*tmp_list
;
10246 rc
= down_interruptible(&bnx2x_prev_sem
);
10248 BNX2X_ERR("Received %d when tried to take lock\n", rc
);
10252 /* Check whether the entry for this path already exists */
10253 tmp_list
= bnx2x_prev_path_get_entry(bp
);
10255 if (!tmp_list
->aer
) {
10256 BNX2X_ERR("Re-Marking the path.\n");
10258 DP(NETIF_MSG_HW
, "Removing AER indication from path %d\n",
10262 up(&bnx2x_prev_sem
);
10265 up(&bnx2x_prev_sem
);
10267 /* Create an entry for this path and add it */
10268 tmp_list
= kmalloc(sizeof(struct bnx2x_prev_path_list
), GFP_KERNEL
);
10270 BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n");
10274 tmp_list
->bus
= bp
->pdev
->bus
->number
;
10275 tmp_list
->slot
= PCI_SLOT(bp
->pdev
->devfn
);
10276 tmp_list
->path
= BP_PATH(bp
);
10278 tmp_list
->undi
= after_undi
? (1 << BP_PORT(bp
)) : 0;
10280 rc
= down_interruptible(&bnx2x_prev_sem
);
10282 BNX2X_ERR("Received %d when tried to take lock\n", rc
);
10285 DP(NETIF_MSG_HW
, "Marked path [%d] - finished previous unload\n",
10287 list_add(&tmp_list
->list
, &bnx2x_prev_list
);
10288 up(&bnx2x_prev_sem
);
10294 static int bnx2x_do_flr(struct bnx2x
*bp
)
10296 struct pci_dev
*dev
= bp
->pdev
;
10298 if (CHIP_IS_E1x(bp
)) {
10299 BNX2X_DEV_INFO("FLR not supported in E1/E1H\n");
10303 /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
10304 if (bp
->common
.bc_ver
< REQ_BC_VER_4_INITIATE_FLR
) {
10305 BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n",
10306 bp
->common
.bc_ver
);
10310 if (!pci_wait_for_pending_transaction(dev
))
10311 dev_err(&dev
->dev
, "transaction is not cleared; proceeding with reset anyway\n");
10313 BNX2X_DEV_INFO("Initiating FLR\n");
10314 bnx2x_fw_command(bp
, DRV_MSG_CODE_INITIATE_FLR
, 0);
10319 static int bnx2x_prev_unload_uncommon(struct bnx2x
*bp
)
10323 BNX2X_DEV_INFO("Uncommon unload Flow\n");
10325 /* Test if previous unload process was already finished for this path */
10326 if (bnx2x_prev_is_path_marked(bp
))
10327 return bnx2x_prev_mcp_done(bp
);
10329 BNX2X_DEV_INFO("Path is unmarked\n");
10331 /* Cannot proceed with FLR if UNDI is loaded, since FW does not match */
10332 if (bnx2x_prev_is_after_undi(bp
))
10335 /* If function has FLR capabilities, and existing FW version matches
10336 * the one required, then FLR will be sufficient to clean any residue
10337 * left by previous driver
10339 rc
= bnx2x_compare_fw_ver(bp
, FW_MSG_CODE_DRV_LOAD_FUNCTION
, false);
10342 /* fw version is good */
10343 BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n");
10344 rc
= bnx2x_do_flr(bp
);
10348 /* FLR was performed */
10349 BNX2X_DEV_INFO("FLR successful\n");
10353 BNX2X_DEV_INFO("Could not FLR\n");
10356 /* Close the MCP request, return failure*/
10357 rc
= bnx2x_prev_mcp_done(bp
);
10359 rc
= BNX2X_PREV_WAIT_NEEDED
;
10364 static int bnx2x_prev_unload_common(struct bnx2x
*bp
)
10366 u32 reset_reg
, tmp_reg
= 0, rc
;
10367 bool prev_undi
= false;
10368 struct bnx2x_mac_vals mac_vals
;
10370 /* It is possible a previous function received 'common' answer,
10371 * but hasn't loaded yet, therefore creating a scenario of
10372 * multiple functions receiving 'common' on the same path.
10374 BNX2X_DEV_INFO("Common unload Flow\n");
10376 memset(&mac_vals
, 0, sizeof(mac_vals
));
10378 if (bnx2x_prev_is_path_marked(bp
))
10379 return bnx2x_prev_mcp_done(bp
);
10381 reset_reg
= REG_RD(bp
, MISC_REG_RESET_REG_1
);
10383 /* Reset should be performed after BRB is emptied */
10384 if (reset_reg
& MISC_REGISTERS_RESET_REG_1_RST_BRB1
) {
10385 u32 timer_count
= 1000;
10386 bool need_write
= true;
10388 /* Close the MAC Rx to prevent BRB from filling up */
10389 bnx2x_prev_unload_close_mac(bp
, &mac_vals
);
10391 /* close LLH filters towards the BRB */
10392 bnx2x_set_rx_filter(&bp
->link_params
, 0);
10394 /* Check if the UNDI driver was previously loaded */
10395 if (bnx2x_prev_is_after_undi(bp
)) {
10397 /* clear the UNDI indication */
10398 REG_WR(bp
, DORQ_REG_NORM_CID_OFST
, 0);
10399 /* clear possible idle check errors */
10400 REG_RD(bp
, NIG_REG_NIG_INT_STS_CLR_0
);
10402 if (!CHIP_IS_E1x(bp
))
10403 /* block FW from writing to host */
10404 REG_WR(bp
, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER
, 0);
10406 /* wait until BRB is empty */
10407 tmp_reg
= REG_RD(bp
, BRB1_REG_NUM_OF_FULL_BLOCKS
);
10408 while (timer_count
) {
10409 u32 prev_brb
= tmp_reg
;
10411 tmp_reg
= REG_RD(bp
, BRB1_REG_NUM_OF_FULL_BLOCKS
);
10415 BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg
);
10417 /* reset timer as long as BRB actually gets emptied */
10418 if (prev_brb
> tmp_reg
)
10419 timer_count
= 1000;
10423 /* New UNDI FW supports MF and contains better
10424 * cleaning methods - might be redundant but harmless.
10426 if (bnx2x_prev_unload_undi_fw_supports_mf(bp
)) {
10428 bnx2x_prev_unload_undi_mf(bp
);
10429 need_write
= false;
10431 } else if (prev_undi
) {
10432 /* If UNDI resides in memory,
10433 * manually increment it
10435 bnx2x_prev_unload_undi_inc(bp
, BP_PORT(bp
), 1);
10441 BNX2X_ERR("Failed to empty BRB, hope for the best\n");
10444 /* No packets are in the pipeline, path is ready for reset */
10445 bnx2x_reset_common(bp
);
10447 if (mac_vals
.xmac_addr
)
10448 REG_WR(bp
, mac_vals
.xmac_addr
, mac_vals
.xmac_val
);
10449 if (mac_vals
.umac_addr
)
10450 REG_WR(bp
, mac_vals
.umac_addr
, mac_vals
.umac_val
);
10451 if (mac_vals
.emac_addr
)
10452 REG_WR(bp
, mac_vals
.emac_addr
, mac_vals
.emac_val
);
10453 if (mac_vals
.bmac_addr
) {
10454 REG_WR(bp
, mac_vals
.bmac_addr
, mac_vals
.bmac_val
[0]);
10455 REG_WR(bp
, mac_vals
.bmac_addr
+ 4, mac_vals
.bmac_val
[1]);
10458 rc
= bnx2x_prev_mark_path(bp
, prev_undi
);
10460 bnx2x_prev_mcp_done(bp
);
10464 return bnx2x_prev_mcp_done(bp
);
10467 /* previous driver DMAE transaction may have occurred when pre-boot stage ended
10468 * and boot began, or when kdump kernel was loaded. Either case would invalidate
10469 * the addresses of the transaction, resulting in was-error bit set in the pci
10470 * causing all hw-to-host pcie transactions to timeout. If this happened we want
10471 * to clear the interrupt which detected this from the pglueb and the was done
10474 static void bnx2x_prev_interrupted_dmae(struct bnx2x
*bp
)
10476 if (!CHIP_IS_E1x(bp
)) {
10477 u32 val
= REG_RD(bp
, PGLUE_B_REG_PGLUE_B_INT_STS
);
10478 if (val
& PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN
) {
10480 "'was error' bit was found to be set in pglueb upon startup. Clearing\n");
10481 REG_WR(bp
, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR
,
10487 static int bnx2x_prev_unload(struct bnx2x
*bp
)
10489 int time_counter
= 10;
10490 u32 rc
, fw
, hw_lock_reg
, hw_lock_val
;
10491 BNX2X_DEV_INFO("Entering Previous Unload Flow\n");
10493 /* clear hw from errors which may have resulted from an interrupted
10494 * dmae transaction.
10496 bnx2x_prev_interrupted_dmae(bp
);
10498 /* Release previously held locks */
10499 hw_lock_reg
= (BP_FUNC(bp
) <= 5) ?
10500 (MISC_REG_DRIVER_CONTROL_1
+ BP_FUNC(bp
) * 8) :
10501 (MISC_REG_DRIVER_CONTROL_7
+ (BP_FUNC(bp
) - 6) * 8);
10503 hw_lock_val
= REG_RD(bp
, hw_lock_reg
);
10505 if (hw_lock_val
& HW_LOCK_RESOURCE_NVRAM
) {
10506 BNX2X_DEV_INFO("Release Previously held NVRAM lock\n");
10507 REG_WR(bp
, MCP_REG_MCPR_NVM_SW_ARB
,
10508 (MCPR_NVM_SW_ARB_ARB_REQ_CLR1
<< BP_PORT(bp
)));
10511 BNX2X_DEV_INFO("Release Previously held hw lock\n");
10512 REG_WR(bp
, hw_lock_reg
, 0xffffffff);
10514 BNX2X_DEV_INFO("No need to release hw/nvram locks\n");
10516 if (MCPR_ACCESS_LOCK_LOCK
& REG_RD(bp
, MCP_REG_MCPR_ACCESS_LOCK
)) {
10517 BNX2X_DEV_INFO("Release previously held alr\n");
10518 bnx2x_release_alr(bp
);
10523 /* Lock MCP using an unload request */
10524 fw
= bnx2x_fw_command(bp
, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS
, 0);
10526 BNX2X_ERR("MCP response failure, aborting\n");
10531 rc
= down_interruptible(&bnx2x_prev_sem
);
10533 BNX2X_ERR("Cannot check for AER; Received %d when tried to take lock\n",
10536 /* If Path is marked by EEH, ignore unload status */
10537 aer
= !!(bnx2x_prev_path_get_entry(bp
) &&
10538 bnx2x_prev_path_get_entry(bp
)->aer
);
10539 up(&bnx2x_prev_sem
);
10542 if (fw
== FW_MSG_CODE_DRV_UNLOAD_COMMON
|| aer
) {
10543 rc
= bnx2x_prev_unload_common(bp
);
10547 /* non-common reply from MCP might require looping */
10548 rc
= bnx2x_prev_unload_uncommon(bp
);
10549 if (rc
!= BNX2X_PREV_WAIT_NEEDED
)
10553 } while (--time_counter
);
10555 if (!time_counter
|| rc
) {
10556 BNX2X_DEV_INFO("Unloading previous driver did not occur, Possibly due to MF UNDI\n");
10557 rc
= -EPROBE_DEFER
;
10560 /* Mark function if its port was used to boot from SAN */
10561 if (bnx2x_port_after_undi(bp
))
10562 bp
->link_params
.feature_config_flags
|=
10563 FEATURE_CONFIG_BOOT_FROM_SAN
;
10565 BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc
);
10570 static void bnx2x_get_common_hwinfo(struct bnx2x
*bp
)
10572 u32 val
, val2
, val3
, val4
, id
, boot_mode
;
10575 /* Get the chip revision id and number. */
10576 /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
10577 val
= REG_RD(bp
, MISC_REG_CHIP_NUM
);
10578 id
= ((val
& 0xffff) << 16);
10579 val
= REG_RD(bp
, MISC_REG_CHIP_REV
);
10580 id
|= ((val
& 0xf) << 12);
10582 /* Metal is read from PCI regs, but we can't access >=0x400 from
10583 * the configuration space (so we need to reg_rd)
10585 val
= REG_RD(bp
, PCICFG_OFFSET
+ PCI_ID_VAL3
);
10586 id
|= (((val
>> 24) & 0xf) << 4);
10587 val
= REG_RD(bp
, MISC_REG_BOND_ID
);
10589 bp
->common
.chip_id
= id
;
10591 /* force 57811 according to MISC register */
10592 if (REG_RD(bp
, MISC_REG_CHIP_TYPE
) & MISC_REG_CHIP_TYPE_57811_MASK
) {
10593 if (CHIP_IS_57810(bp
))
10594 bp
->common
.chip_id
= (CHIP_NUM_57811
<< 16) |
10595 (bp
->common
.chip_id
& 0x0000FFFF);
10596 else if (CHIP_IS_57810_MF(bp
))
10597 bp
->common
.chip_id
= (CHIP_NUM_57811_MF
<< 16) |
10598 (bp
->common
.chip_id
& 0x0000FFFF);
10599 bp
->common
.chip_id
|= 0x1;
10602 /* Set doorbell size */
10603 bp
->db_size
= (1 << BNX2X_DB_SHIFT
);
10605 if (!CHIP_IS_E1x(bp
)) {
10606 val
= REG_RD(bp
, MISC_REG_PORT4MODE_EN_OVWR
);
10607 if ((val
& 1) == 0)
10608 val
= REG_RD(bp
, MISC_REG_PORT4MODE_EN
);
10610 val
= (val
>> 1) & 1;
10611 BNX2X_DEV_INFO("chip is in %s\n", val
? "4_PORT_MODE" :
10613 bp
->common
.chip_port_mode
= val
? CHIP_4_PORT_MODE
:
10616 if (CHIP_MODE_IS_4_PORT(bp
))
10617 bp
->pfid
= (bp
->pf_num
>> 1); /* 0..3 */
10619 bp
->pfid
= (bp
->pf_num
& 0x6); /* 0, 2, 4, 6 */
10621 bp
->common
.chip_port_mode
= CHIP_PORT_MODE_NONE
; /* N/A */
10622 bp
->pfid
= bp
->pf_num
; /* 0..7 */
10625 BNX2X_DEV_INFO("pf_id: %x", bp
->pfid
);
10627 bp
->link_params
.chip_id
= bp
->common
.chip_id
;
10628 BNX2X_DEV_INFO("chip ID is 0x%x\n", id
);
10630 val
= (REG_RD(bp
, 0x2874) & 0x55);
10631 if ((bp
->common
.chip_id
& 0x1) ||
10632 (CHIP_IS_E1(bp
) && val
) || (CHIP_IS_E1H(bp
) && (val
== 0x55))) {
10633 bp
->flags
|= ONE_PORT_FLAG
;
10634 BNX2X_DEV_INFO("single port device\n");
10637 val
= REG_RD(bp
, MCP_REG_MCPR_NVM_CFG4
);
10638 bp
->common
.flash_size
= (BNX2X_NVRAM_1MB_SIZE
<<
10639 (val
& MCPR_NVM_CFG4_FLASH_SIZE
));
10640 BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
10641 bp
->common
.flash_size
, bp
->common
.flash_size
);
10643 bnx2x_init_shmem(bp
);
10645 bp
->common
.shmem2_base
= REG_RD(bp
, (BP_PATH(bp
) ?
10646 MISC_REG_GENERIC_CR_1
:
10647 MISC_REG_GENERIC_CR_0
));
10649 bp
->link_params
.shmem_base
= bp
->common
.shmem_base
;
10650 bp
->link_params
.shmem2_base
= bp
->common
.shmem2_base
;
10651 if (SHMEM2_RD(bp
, size
) >
10652 (u32
)offsetof(struct shmem2_region
, lfa_host_addr
[BP_PORT(bp
)]))
10653 bp
->link_params
.lfa_base
=
10654 REG_RD(bp
, bp
->common
.shmem2_base
+
10655 (u32
)offsetof(struct shmem2_region
,
10656 lfa_host_addr
[BP_PORT(bp
)]));
10658 bp
->link_params
.lfa_base
= 0;
10659 BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n",
10660 bp
->common
.shmem_base
, bp
->common
.shmem2_base
);
10662 if (!bp
->common
.shmem_base
) {
10663 BNX2X_DEV_INFO("MCP not active\n");
10664 bp
->flags
|= NO_MCP_FLAG
;
10668 bp
->common
.hw_config
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.config
);
10669 BNX2X_DEV_INFO("hw_config 0x%08x\n", bp
->common
.hw_config
);
10671 bp
->link_params
.hw_led_mode
= ((bp
->common
.hw_config
&
10672 SHARED_HW_CFG_LED_MODE_MASK
) >>
10673 SHARED_HW_CFG_LED_MODE_SHIFT
);
10675 bp
->link_params
.feature_config_flags
= 0;
10676 val
= SHMEM_RD(bp
, dev_info
.shared_feature_config
.config
);
10677 if (val
& SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED
)
10678 bp
->link_params
.feature_config_flags
|=
10679 FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED
;
10681 bp
->link_params
.feature_config_flags
&=
10682 ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED
;
10684 val
= SHMEM_RD(bp
, dev_info
.bc_rev
) >> 8;
10685 bp
->common
.bc_ver
= val
;
10686 BNX2X_DEV_INFO("bc_ver %X\n", val
);
10687 if (val
< BNX2X_BC_VER
) {
10688 /* for now only warn
10689 * later we might need to enforce this */
10690 BNX2X_ERR("This driver needs bc_ver %X but found %X, please upgrade BC\n",
10691 BNX2X_BC_VER
, val
);
10693 bp
->link_params
.feature_config_flags
|=
10694 (val
>= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL
) ?
10695 FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY
: 0;
10697 bp
->link_params
.feature_config_flags
|=
10698 (val
>= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL
) ?
10699 FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY
: 0;
10700 bp
->link_params
.feature_config_flags
|=
10701 (val
>= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED
) ?
10702 FEATURE_CONFIG_BC_SUPPORTS_AFEX
: 0;
10703 bp
->link_params
.feature_config_flags
|=
10704 (val
>= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED
) ?
10705 FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED
: 0;
10707 bp
->link_params
.feature_config_flags
|=
10708 (val
>= REQ_BC_VER_4_MT_SUPPORTED
) ?
10709 FEATURE_CONFIG_MT_SUPPORT
: 0;
10711 bp
->flags
|= (val
>= REQ_BC_VER_4_PFC_STATS_SUPPORTED
) ?
10712 BC_SUPPORTS_PFC_STATS
: 0;
10714 bp
->flags
|= (val
>= REQ_BC_VER_4_FCOE_FEATURES
) ?
10715 BC_SUPPORTS_FCOE_FEATURES
: 0;
10717 bp
->flags
|= (val
>= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF
) ?
10718 BC_SUPPORTS_DCBX_MSG_NON_PMF
: 0;
10720 bp
->flags
|= (val
>= REQ_BC_VER_4_RMMOD_CMD
) ?
10721 BC_SUPPORTS_RMMOD_CMD
: 0;
10723 boot_mode
= SHMEM_RD(bp
,
10724 dev_info
.port_feature_config
[BP_PORT(bp
)].mba_config
) &
10725 PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK
;
10726 switch (boot_mode
) {
10727 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE
:
10728 bp
->common
.boot_mode
= FEATURE_ETH_BOOTMODE_PXE
;
10730 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB
:
10731 bp
->common
.boot_mode
= FEATURE_ETH_BOOTMODE_ISCSI
;
10733 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT
:
10734 bp
->common
.boot_mode
= FEATURE_ETH_BOOTMODE_FCOE
;
10736 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE
:
10737 bp
->common
.boot_mode
= FEATURE_ETH_BOOTMODE_NONE
;
10741 pci_read_config_word(bp
->pdev
, bp
->pdev
->pm_cap
+ PCI_PM_PMC
, &pmc
);
10742 bp
->flags
|= (pmc
& PCI_PM_CAP_PME_D3cold
) ? 0 : NO_WOL_FLAG
;
10744 BNX2X_DEV_INFO("%sWoL capable\n",
10745 (bp
->flags
& NO_WOL_FLAG
) ? "not " : "");
10747 val
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.part_num
);
10748 val2
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.part_num
[4]);
10749 val3
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.part_num
[8]);
10750 val4
= SHMEM_RD(bp
, dev_info
.shared_hw_config
.part_num
[12]);
10752 dev_info(&bp
->pdev
->dev
, "part number %X-%X-%X-%X\n",
10753 val
, val2
, val3
, val4
);
10756 #define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
10757 #define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
10759 static int bnx2x_get_igu_cam_info(struct bnx2x
*bp
)
10761 int pfid
= BP_FUNC(bp
);
10764 u8 fid
, igu_sb_cnt
= 0;
10766 bp
->igu_base_sb
= 0xff;
10767 if (CHIP_INT_MODE_IS_BC(bp
)) {
10768 int vn
= BP_VN(bp
);
10769 igu_sb_cnt
= bp
->igu_sb_cnt
;
10770 bp
->igu_base_sb
= (CHIP_MODE_IS_4_PORT(bp
) ? pfid
: vn
) *
10773 bp
->igu_dsb_id
= E1HVN_MAX
* FP_SB_MAX_E1x
+
10774 (CHIP_MODE_IS_4_PORT(bp
) ? pfid
: vn
);
10779 /* IGU in normal mode - read CAM */
10780 for (igu_sb_id
= 0; igu_sb_id
< IGU_REG_MAPPING_MEMORY_SIZE
;
10782 val
= REG_RD(bp
, IGU_REG_MAPPING_MEMORY
+ igu_sb_id
* 4);
10783 if (!(val
& IGU_REG_MAPPING_MEMORY_VALID
))
10785 fid
= IGU_FID(val
);
10786 if ((fid
& IGU_FID_ENCODE_IS_PF
)) {
10787 if ((fid
& IGU_FID_PF_NUM_MASK
) != pfid
)
10789 if (IGU_VEC(val
) == 0)
10790 /* default status block */
10791 bp
->igu_dsb_id
= igu_sb_id
;
10793 if (bp
->igu_base_sb
== 0xff)
10794 bp
->igu_base_sb
= igu_sb_id
;
10800 #ifdef CONFIG_PCI_MSI
10801 /* Due to new PF resource allocation by MFW T7.4 and above, it's
10802 * optional that number of CAM entries will not be equal to the value
10803 * advertised in PCI.
10804 * Driver should use the minimal value of both as the actual status
10807 bp
->igu_sb_cnt
= min_t(int, bp
->igu_sb_cnt
, igu_sb_cnt
);
10810 if (igu_sb_cnt
== 0) {
10811 BNX2X_ERR("CAM configuration error\n");
10818 static void bnx2x_link_settings_supported(struct bnx2x
*bp
, u32 switch_cfg
)
10820 int cfg_size
= 0, idx
, port
= BP_PORT(bp
);
10822 /* Aggregation of supported attributes of all external phys */
10823 bp
->port
.supported
[0] = 0;
10824 bp
->port
.supported
[1] = 0;
10825 switch (bp
->link_params
.num_phys
) {
10827 bp
->port
.supported
[0] = bp
->link_params
.phy
[INT_PHY
].supported
;
10831 bp
->port
.supported
[0] = bp
->link_params
.phy
[EXT_PHY1
].supported
;
10835 if (bp
->link_params
.multi_phy_config
&
10836 PORT_HW_CFG_PHY_SWAPPED_ENABLED
) {
10837 bp
->port
.supported
[1] =
10838 bp
->link_params
.phy
[EXT_PHY1
].supported
;
10839 bp
->port
.supported
[0] =
10840 bp
->link_params
.phy
[EXT_PHY2
].supported
;
10842 bp
->port
.supported
[0] =
10843 bp
->link_params
.phy
[EXT_PHY1
].supported
;
10844 bp
->port
.supported
[1] =
10845 bp
->link_params
.phy
[EXT_PHY2
].supported
;
10851 if (!(bp
->port
.supported
[0] || bp
->port
.supported
[1])) {
10852 BNX2X_ERR("NVRAM config error. BAD phy config. PHY1 config 0x%x, PHY2 config 0x%x\n",
10854 dev_info
.port_hw_config
[port
].external_phy_config
),
10856 dev_info
.port_hw_config
[port
].external_phy_config2
));
10860 if (CHIP_IS_E3(bp
))
10861 bp
->port
.phy_addr
= REG_RD(bp
, MISC_REG_WC0_CTRL_PHY_ADDR
);
10863 switch (switch_cfg
) {
10864 case SWITCH_CFG_1G
:
10865 bp
->port
.phy_addr
= REG_RD(
10866 bp
, NIG_REG_SERDES0_CTRL_PHY_ADDR
+ port
*0x10);
10868 case SWITCH_CFG_10G
:
10869 bp
->port
.phy_addr
= REG_RD(
10870 bp
, NIG_REG_XGXS0_CTRL_PHY_ADDR
+ port
*0x18);
10873 BNX2X_ERR("BAD switch_cfg link_config 0x%x\n",
10874 bp
->port
.link_config
[0]);
10878 BNX2X_DEV_INFO("phy_addr 0x%x\n", bp
->port
.phy_addr
);
10879 /* mask what we support according to speed_cap_mask per configuration */
10880 for (idx
= 0; idx
< cfg_size
; idx
++) {
10881 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10882 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF
))
10883 bp
->port
.supported
[idx
] &= ~SUPPORTED_10baseT_Half
;
10885 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10886 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL
))
10887 bp
->port
.supported
[idx
] &= ~SUPPORTED_10baseT_Full
;
10889 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10890 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF
))
10891 bp
->port
.supported
[idx
] &= ~SUPPORTED_100baseT_Half
;
10893 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10894 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL
))
10895 bp
->port
.supported
[idx
] &= ~SUPPORTED_100baseT_Full
;
10897 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10898 PORT_HW_CFG_SPEED_CAPABILITY_D0_1G
))
10899 bp
->port
.supported
[idx
] &= ~(SUPPORTED_1000baseT_Half
|
10900 SUPPORTED_1000baseT_Full
);
10902 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10903 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G
))
10904 bp
->port
.supported
[idx
] &= ~SUPPORTED_2500baseX_Full
;
10906 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10907 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G
))
10908 bp
->port
.supported
[idx
] &= ~SUPPORTED_10000baseT_Full
;
10910 if (!(bp
->link_params
.speed_cap_mask
[idx
] &
10911 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G
))
10912 bp
->port
.supported
[idx
] &= ~SUPPORTED_20000baseKR2_Full
;
10915 BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp
->port
.supported
[0],
10916 bp
->port
.supported
[1]);
10919 static void bnx2x_link_settings_requested(struct bnx2x
*bp
)
10921 u32 link_config
, idx
, cfg_size
= 0;
10922 bp
->port
.advertising
[0] = 0;
10923 bp
->port
.advertising
[1] = 0;
10924 switch (bp
->link_params
.num_phys
) {
10933 for (idx
= 0; idx
< cfg_size
; idx
++) {
10934 bp
->link_params
.req_duplex
[idx
] = DUPLEX_FULL
;
10935 link_config
= bp
->port
.link_config
[idx
];
10936 switch (link_config
& PORT_FEATURE_LINK_SPEED_MASK
) {
10937 case PORT_FEATURE_LINK_SPEED_AUTO
:
10938 if (bp
->port
.supported
[idx
] & SUPPORTED_Autoneg
) {
10939 bp
->link_params
.req_line_speed
[idx
] =
10941 bp
->port
.advertising
[idx
] |=
10942 bp
->port
.supported
[idx
];
10943 if (bp
->link_params
.phy
[EXT_PHY1
].type
==
10944 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833
)
10945 bp
->port
.advertising
[idx
] |=
10946 (SUPPORTED_100baseT_Half
|
10947 SUPPORTED_100baseT_Full
);
10949 /* force 10G, no AN */
10950 bp
->link_params
.req_line_speed
[idx
] =
10952 bp
->port
.advertising
[idx
] |=
10953 (ADVERTISED_10000baseT_Full
|
10959 case PORT_FEATURE_LINK_SPEED_10M_FULL
:
10960 if (bp
->port
.supported
[idx
] & SUPPORTED_10baseT_Full
) {
10961 bp
->link_params
.req_line_speed
[idx
] =
10963 bp
->port
.advertising
[idx
] |=
10964 (ADVERTISED_10baseT_Full
|
10967 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
10969 bp
->link_params
.speed_cap_mask
[idx
]);
10974 case PORT_FEATURE_LINK_SPEED_10M_HALF
:
10975 if (bp
->port
.supported
[idx
] & SUPPORTED_10baseT_Half
) {
10976 bp
->link_params
.req_line_speed
[idx
] =
10978 bp
->link_params
.req_duplex
[idx
] =
10980 bp
->port
.advertising
[idx
] |=
10981 (ADVERTISED_10baseT_Half
|
10984 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
10986 bp
->link_params
.speed_cap_mask
[idx
]);
10991 case PORT_FEATURE_LINK_SPEED_100M_FULL
:
10992 if (bp
->port
.supported
[idx
] &
10993 SUPPORTED_100baseT_Full
) {
10994 bp
->link_params
.req_line_speed
[idx
] =
10996 bp
->port
.advertising
[idx
] |=
10997 (ADVERTISED_100baseT_Full
|
11000 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11002 bp
->link_params
.speed_cap_mask
[idx
]);
11007 case PORT_FEATURE_LINK_SPEED_100M_HALF
:
11008 if (bp
->port
.supported
[idx
] &
11009 SUPPORTED_100baseT_Half
) {
11010 bp
->link_params
.req_line_speed
[idx
] =
11012 bp
->link_params
.req_duplex
[idx
] =
11014 bp
->port
.advertising
[idx
] |=
11015 (ADVERTISED_100baseT_Half
|
11018 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11020 bp
->link_params
.speed_cap_mask
[idx
]);
11025 case PORT_FEATURE_LINK_SPEED_1G
:
11026 if (bp
->port
.supported
[idx
] &
11027 SUPPORTED_1000baseT_Full
) {
11028 bp
->link_params
.req_line_speed
[idx
] =
11030 bp
->port
.advertising
[idx
] |=
11031 (ADVERTISED_1000baseT_Full
|
11034 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11036 bp
->link_params
.speed_cap_mask
[idx
]);
11041 case PORT_FEATURE_LINK_SPEED_2_5G
:
11042 if (bp
->port
.supported
[idx
] &
11043 SUPPORTED_2500baseX_Full
) {
11044 bp
->link_params
.req_line_speed
[idx
] =
11046 bp
->port
.advertising
[idx
] |=
11047 (ADVERTISED_2500baseX_Full
|
11050 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11052 bp
->link_params
.speed_cap_mask
[idx
]);
11057 case PORT_FEATURE_LINK_SPEED_10G_CX4
:
11058 if (bp
->port
.supported
[idx
] &
11059 SUPPORTED_10000baseT_Full
) {
11060 bp
->link_params
.req_line_speed
[idx
] =
11062 bp
->port
.advertising
[idx
] |=
11063 (ADVERTISED_10000baseT_Full
|
11066 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11068 bp
->link_params
.speed_cap_mask
[idx
]);
11072 case PORT_FEATURE_LINK_SPEED_20G
:
11073 bp
->link_params
.req_line_speed
[idx
] = SPEED_20000
;
11077 BNX2X_ERR("NVRAM config error. BAD link speed link_config 0x%x\n",
11079 bp
->link_params
.req_line_speed
[idx
] =
11081 bp
->port
.advertising
[idx
] =
11082 bp
->port
.supported
[idx
];
11086 bp
->link_params
.req_flow_ctrl
[idx
] = (link_config
&
11087 PORT_FEATURE_FLOW_CONTROL_MASK
);
11088 if (bp
->link_params
.req_flow_ctrl
[idx
] ==
11089 BNX2X_FLOW_CTRL_AUTO
) {
11090 if (!(bp
->port
.supported
[idx
] & SUPPORTED_Autoneg
))
11091 bp
->link_params
.req_flow_ctrl
[idx
] =
11092 BNX2X_FLOW_CTRL_NONE
;
11094 bnx2x_set_requested_fc(bp
);
11097 BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x advertising 0x%x\n",
11098 bp
->link_params
.req_line_speed
[idx
],
11099 bp
->link_params
.req_duplex
[idx
],
11100 bp
->link_params
.req_flow_ctrl
[idx
],
11101 bp
->port
.advertising
[idx
]);
11105 static void bnx2x_set_mac_buf(u8
*mac_buf
, u32 mac_lo
, u16 mac_hi
)
11107 __be16 mac_hi_be
= cpu_to_be16(mac_hi
);
11108 __be32 mac_lo_be
= cpu_to_be32(mac_lo
);
11109 memcpy(mac_buf
, &mac_hi_be
, sizeof(mac_hi_be
));
11110 memcpy(mac_buf
+ sizeof(mac_hi_be
), &mac_lo_be
, sizeof(mac_lo_be
));
11113 static void bnx2x_get_port_hwinfo(struct bnx2x
*bp
)
11115 int port
= BP_PORT(bp
);
11117 u32 ext_phy_type
, ext_phy_config
, eee_mode
;
11119 bp
->link_params
.bp
= bp
;
11120 bp
->link_params
.port
= port
;
11122 bp
->link_params
.lane_config
=
11123 SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].lane_config
);
11125 bp
->link_params
.speed_cap_mask
[0] =
11127 dev_info
.port_hw_config
[port
].speed_capability_mask
) &
11128 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK
;
11129 bp
->link_params
.speed_cap_mask
[1] =
11131 dev_info
.port_hw_config
[port
].speed_capability_mask2
) &
11132 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK
;
11133 bp
->port
.link_config
[0] =
11134 SHMEM_RD(bp
, dev_info
.port_feature_config
[port
].link_config
);
11136 bp
->port
.link_config
[1] =
11137 SHMEM_RD(bp
, dev_info
.port_feature_config
[port
].link_config2
);
11139 bp
->link_params
.multi_phy_config
=
11140 SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].multi_phy_config
);
11141 /* If the device is capable of WoL, set the default state according
11144 config
= SHMEM_RD(bp
, dev_info
.port_feature_config
[port
].config
);
11145 bp
->wol
= (!(bp
->flags
& NO_WOL_FLAG
) &&
11146 (config
& PORT_FEATURE_WOL_ENABLED
));
11148 if ((config
& PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK
) ==
11149 PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE
&& !IS_MF(bp
))
11150 bp
->flags
|= NO_ISCSI_FLAG
;
11151 if ((config
& PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK
) ==
11152 PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI
&& !(IS_MF(bp
)))
11153 bp
->flags
|= NO_FCOE_FLAG
;
11155 BNX2X_DEV_INFO("lane_config 0x%08x speed_cap_mask0 0x%08x link_config0 0x%08x\n",
11156 bp
->link_params
.lane_config
,
11157 bp
->link_params
.speed_cap_mask
[0],
11158 bp
->port
.link_config
[0]);
11160 bp
->link_params
.switch_cfg
= (bp
->port
.link_config
[0] &
11161 PORT_FEATURE_CONNECTED_SWITCH_MASK
);
11162 bnx2x_phy_probe(&bp
->link_params
);
11163 bnx2x_link_settings_supported(bp
, bp
->link_params
.switch_cfg
);
11165 bnx2x_link_settings_requested(bp
);
11168 * If connected directly, work with the internal PHY, otherwise, work
11169 * with the external PHY
11173 dev_info
.port_hw_config
[port
].external_phy_config
);
11174 ext_phy_type
= XGXS_EXT_PHY_TYPE(ext_phy_config
);
11175 if (ext_phy_type
== PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT
)
11176 bp
->mdio
.prtad
= bp
->port
.phy_addr
;
11178 else if ((ext_phy_type
!= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE
) &&
11179 (ext_phy_type
!= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN
))
11181 XGXS_EXT_PHY_ADDR(ext_phy_config
);
11183 /* Configure link feature according to nvram value */
11184 eee_mode
= (((SHMEM_RD(bp
, dev_info
.
11185 port_feature_config
[port
].eee_power_mode
)) &
11186 PORT_FEAT_CFG_EEE_POWER_MODE_MASK
) >>
11187 PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT
);
11188 if (eee_mode
!= PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED
) {
11189 bp
->link_params
.eee_mode
= EEE_MODE_ADV_LPI
|
11190 EEE_MODE_ENABLE_LPI
|
11191 EEE_MODE_OUTPUT_TIME
;
11193 bp
->link_params
.eee_mode
= 0;
11197 void bnx2x_get_iscsi_info(struct bnx2x
*bp
)
11199 u32 no_flags
= NO_ISCSI_FLAG
;
11200 int port
= BP_PORT(bp
);
11201 u32 max_iscsi_conn
= FW_ENCODE_32BIT_PATTERN
^ SHMEM_RD(bp
,
11202 drv_lic_key
[port
].max_iscsi_conn
);
11204 if (!CNIC_SUPPORT(bp
)) {
11205 bp
->flags
|= no_flags
;
11209 /* Get the number of maximum allowed iSCSI connections */
11210 bp
->cnic_eth_dev
.max_iscsi_conn
=
11211 (max_iscsi_conn
& BNX2X_MAX_ISCSI_INIT_CONN_MASK
) >>
11212 BNX2X_MAX_ISCSI_INIT_CONN_SHIFT
;
11214 BNX2X_DEV_INFO("max_iscsi_conn 0x%x\n",
11215 bp
->cnic_eth_dev
.max_iscsi_conn
);
11218 * If maximum allowed number of connections is zero -
11219 * disable the feature.
11221 if (!bp
->cnic_eth_dev
.max_iscsi_conn
)
11222 bp
->flags
|= no_flags
;
11225 static void bnx2x_get_ext_wwn_info(struct bnx2x
*bp
, int func
)
11228 bp
->cnic_eth_dev
.fcoe_wwn_port_name_hi
=
11229 MF_CFG_RD(bp
, func_ext_config
[func
].fcoe_wwn_port_name_upper
);
11230 bp
->cnic_eth_dev
.fcoe_wwn_port_name_lo
=
11231 MF_CFG_RD(bp
, func_ext_config
[func
].fcoe_wwn_port_name_lower
);
11234 bp
->cnic_eth_dev
.fcoe_wwn_node_name_hi
=
11235 MF_CFG_RD(bp
, func_ext_config
[func
].fcoe_wwn_node_name_upper
);
11236 bp
->cnic_eth_dev
.fcoe_wwn_node_name_lo
=
11237 MF_CFG_RD(bp
, func_ext_config
[func
].fcoe_wwn_node_name_lower
);
11240 static int bnx2x_shared_fcoe_funcs(struct bnx2x
*bp
)
11247 /* iterate over absolute function ids for this path: */
11248 for (fid
= BP_PATH(bp
); fid
< E2_FUNC_MAX
* 2; fid
+= 2) {
11249 if (IS_MF_SD(bp
)) {
11250 u32 cfg
= MF_CFG_RD(bp
,
11251 func_mf_config
[fid
].config
);
11253 if (!(cfg
& FUNC_MF_CFG_FUNC_HIDE
) &&
11254 ((cfg
& FUNC_MF_CFG_PROTOCOL_MASK
) ==
11255 FUNC_MF_CFG_PROTOCOL_FCOE
))
11258 u32 cfg
= MF_CFG_RD(bp
,
11259 func_ext_config
[fid
].
11262 if ((cfg
& MACP_FUNC_CFG_FLAGS_ENABLED
) &&
11263 (cfg
& MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD
))
11268 int port
, port_cnt
= CHIP_MODE_IS_4_PORT(bp
) ? 2 : 1;
11270 for (port
= 0; port
< port_cnt
; port
++) {
11271 u32 lic
= SHMEM_RD(bp
,
11272 drv_lic_key
[port
].max_fcoe_conn
) ^
11273 FW_ENCODE_32BIT_PATTERN
;
11282 static void bnx2x_get_fcoe_info(struct bnx2x
*bp
)
11284 int port
= BP_PORT(bp
);
11285 int func
= BP_ABS_FUNC(bp
);
11286 u32 max_fcoe_conn
= FW_ENCODE_32BIT_PATTERN
^ SHMEM_RD(bp
,
11287 drv_lic_key
[port
].max_fcoe_conn
);
11288 u8 num_fcoe_func
= bnx2x_shared_fcoe_funcs(bp
);
11290 if (!CNIC_SUPPORT(bp
)) {
11291 bp
->flags
|= NO_FCOE_FLAG
;
11295 /* Get the number of maximum allowed FCoE connections */
11296 bp
->cnic_eth_dev
.max_fcoe_conn
=
11297 (max_fcoe_conn
& BNX2X_MAX_FCOE_INIT_CONN_MASK
) >>
11298 BNX2X_MAX_FCOE_INIT_CONN_SHIFT
;
11300 /* Calculate the number of maximum allowed FCoE tasks */
11301 bp
->cnic_eth_dev
.max_fcoe_exchanges
= MAX_NUM_FCOE_TASKS_PER_ENGINE
;
11303 /* check if FCoE resources must be shared between different functions */
11305 bp
->cnic_eth_dev
.max_fcoe_exchanges
/= num_fcoe_func
;
11307 /* Read the WWN: */
11310 bp
->cnic_eth_dev
.fcoe_wwn_port_name_hi
=
11312 dev_info
.port_hw_config
[port
].
11313 fcoe_wwn_port_name_upper
);
11314 bp
->cnic_eth_dev
.fcoe_wwn_port_name_lo
=
11316 dev_info
.port_hw_config
[port
].
11317 fcoe_wwn_port_name_lower
);
11320 bp
->cnic_eth_dev
.fcoe_wwn_node_name_hi
=
11322 dev_info
.port_hw_config
[port
].
11323 fcoe_wwn_node_name_upper
);
11324 bp
->cnic_eth_dev
.fcoe_wwn_node_name_lo
=
11326 dev_info
.port_hw_config
[port
].
11327 fcoe_wwn_node_name_lower
);
11328 } else if (!IS_MF_SD(bp
)) {
11330 * Read the WWN info only if the FCoE feature is enabled for
11333 if (BNX2X_MF_EXT_PROTOCOL_FCOE(bp
) && !CHIP_IS_E1x(bp
))
11334 bnx2x_get_ext_wwn_info(bp
, func
);
11336 } else if (IS_MF_FCOE_SD(bp
) && !CHIP_IS_E1x(bp
)) {
11337 bnx2x_get_ext_wwn_info(bp
, func
);
11340 BNX2X_DEV_INFO("max_fcoe_conn 0x%x\n", bp
->cnic_eth_dev
.max_fcoe_conn
);
11343 * If maximum allowed number of connections is zero -
11344 * disable the feature.
11346 if (!bp
->cnic_eth_dev
.max_fcoe_conn
)
11347 bp
->flags
|= NO_FCOE_FLAG
;
11350 static void bnx2x_get_cnic_info(struct bnx2x
*bp
)
11353 * iSCSI may be dynamically disabled but reading
11354 * info here we will decrease memory usage by driver
11355 * if the feature is disabled for good
11357 bnx2x_get_iscsi_info(bp
);
11358 bnx2x_get_fcoe_info(bp
);
11361 static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x
*bp
)
11364 int func
= BP_ABS_FUNC(bp
);
11365 int port
= BP_PORT(bp
);
11366 u8
*iscsi_mac
= bp
->cnic_eth_dev
.iscsi_mac
;
11367 u8
*fip_mac
= bp
->fip_mac
;
11370 /* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or
11371 * FCoE MAC then the appropriate feature should be disabled.
11372 * In non SD mode features configuration comes from struct
11375 if (!IS_MF_SD(bp
) && !CHIP_IS_E1x(bp
)) {
11376 u32 cfg
= MF_CFG_RD(bp
, func_ext_config
[func
].func_cfg
);
11377 if (cfg
& MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD
) {
11378 val2
= MF_CFG_RD(bp
, func_ext_config
[func
].
11379 iscsi_mac_addr_upper
);
11380 val
= MF_CFG_RD(bp
, func_ext_config
[func
].
11381 iscsi_mac_addr_lower
);
11382 bnx2x_set_mac_buf(iscsi_mac
, val
, val2
);
11384 ("Read iSCSI MAC: %pM\n", iscsi_mac
);
11386 bp
->flags
|= NO_ISCSI_OOO_FLAG
| NO_ISCSI_FLAG
;
11389 if (cfg
& MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD
) {
11390 val2
= MF_CFG_RD(bp
, func_ext_config
[func
].
11391 fcoe_mac_addr_upper
);
11392 val
= MF_CFG_RD(bp
, func_ext_config
[func
].
11393 fcoe_mac_addr_lower
);
11394 bnx2x_set_mac_buf(fip_mac
, val
, val2
);
11396 ("Read FCoE L2 MAC: %pM\n", fip_mac
);
11398 bp
->flags
|= NO_FCOE_FLAG
;
11401 bp
->mf_ext_config
= cfg
;
11403 } else { /* SD MODE */
11404 if (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp
)) {
11405 /* use primary mac as iscsi mac */
11406 memcpy(iscsi_mac
, bp
->dev
->dev_addr
, ETH_ALEN
);
11408 BNX2X_DEV_INFO("SD ISCSI MODE\n");
11410 ("Read iSCSI MAC: %pM\n", iscsi_mac
);
11411 } else if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp
)) {
11412 /* use primary mac as fip mac */
11413 memcpy(fip_mac
, bp
->dev
->dev_addr
, ETH_ALEN
);
11414 BNX2X_DEV_INFO("SD FCoE MODE\n");
11416 ("Read FIP MAC: %pM\n", fip_mac
);
11420 /* If this is a storage-only interface, use SAN mac as
11421 * primary MAC. Notice that for SD this is already the case,
11422 * as the SAN mac was copied from the primary MAC.
11424 if (IS_MF_FCOE_AFEX(bp
))
11425 memcpy(bp
->dev
->dev_addr
, fip_mac
, ETH_ALEN
);
11427 val2
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].
11429 val
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].
11431 bnx2x_set_mac_buf(iscsi_mac
, val
, val2
);
11433 val2
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].
11434 fcoe_fip_mac_upper
);
11435 val
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].
11436 fcoe_fip_mac_lower
);
11437 bnx2x_set_mac_buf(fip_mac
, val
, val2
);
11440 /* Disable iSCSI OOO if MAC configuration is invalid. */
11441 if (!is_valid_ether_addr(iscsi_mac
)) {
11442 bp
->flags
|= NO_ISCSI_OOO_FLAG
| NO_ISCSI_FLAG
;
11443 memset(iscsi_mac
, 0, ETH_ALEN
);
11446 /* Disable FCoE if MAC configuration is invalid. */
11447 if (!is_valid_ether_addr(fip_mac
)) {
11448 bp
->flags
|= NO_FCOE_FLAG
;
11449 memset(bp
->fip_mac
, 0, ETH_ALEN
);
11453 static void bnx2x_get_mac_hwinfo(struct bnx2x
*bp
)
11456 int func
= BP_ABS_FUNC(bp
);
11457 int port
= BP_PORT(bp
);
11459 /* Zero primary MAC configuration */
11460 memset(bp
->dev
->dev_addr
, 0, ETH_ALEN
);
11462 if (BP_NOMCP(bp
)) {
11463 BNX2X_ERROR("warning: random MAC workaround active\n");
11464 eth_hw_addr_random(bp
->dev
);
11465 } else if (IS_MF(bp
)) {
11466 val2
= MF_CFG_RD(bp
, func_mf_config
[func
].mac_upper
);
11467 val
= MF_CFG_RD(bp
, func_mf_config
[func
].mac_lower
);
11468 if ((val2
!= FUNC_MF_CFG_UPPERMAC_DEFAULT
) &&
11469 (val
!= FUNC_MF_CFG_LOWERMAC_DEFAULT
))
11470 bnx2x_set_mac_buf(bp
->dev
->dev_addr
, val
, val2
);
11472 if (CNIC_SUPPORT(bp
))
11473 bnx2x_get_cnic_mac_hwinfo(bp
);
11475 /* in SF read MACs from port configuration */
11476 val2
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].mac_upper
);
11477 val
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].mac_lower
);
11478 bnx2x_set_mac_buf(bp
->dev
->dev_addr
, val
, val2
);
11480 if (CNIC_SUPPORT(bp
))
11481 bnx2x_get_cnic_mac_hwinfo(bp
);
11484 if (!BP_NOMCP(bp
)) {
11485 /* Read physical port identifier from shmem */
11486 val2
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].mac_upper
);
11487 val
= SHMEM_RD(bp
, dev_info
.port_hw_config
[port
].mac_lower
);
11488 bnx2x_set_mac_buf(bp
->phys_port_id
, val
, val2
);
11489 bp
->flags
|= HAS_PHYS_PORT_ID
;
11492 memcpy(bp
->link_params
.mac_addr
, bp
->dev
->dev_addr
, ETH_ALEN
);
11494 if (!bnx2x_is_valid_ether_addr(bp
, bp
->dev
->dev_addr
))
11495 dev_err(&bp
->pdev
->dev
,
11496 "bad Ethernet MAC address configuration: %pM\n"
11497 "change it manually before bringing up the appropriate network interface\n",
11498 bp
->dev
->dev_addr
);
11501 static bool bnx2x_get_dropless_info(struct bnx2x
*bp
)
11509 if (IS_MF(bp
) && !CHIP_IS_E1x(bp
)) {
11510 /* Take function: tmp = func */
11511 tmp
= BP_ABS_FUNC(bp
);
11512 cfg
= MF_CFG_RD(bp
, func_ext_config
[tmp
].func_cfg
);
11513 cfg
= !!(cfg
& MACP_FUNC_CFG_PAUSE_ON_HOST_RING
);
11515 /* Take port: tmp = port */
11518 dev_info
.port_hw_config
[tmp
].generic_features
);
11519 cfg
= !!(cfg
& PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED
);
11524 static int bnx2x_get_hwinfo(struct bnx2x
*bp
)
11526 int /*abs*/func
= BP_ABS_FUNC(bp
);
11531 bnx2x_get_common_hwinfo(bp
);
11534 * initialize IGU parameters
11536 if (CHIP_IS_E1x(bp
)) {
11537 bp
->common
.int_block
= INT_BLOCK_HC
;
11539 bp
->igu_dsb_id
= DEF_SB_IGU_ID
;
11540 bp
->igu_base_sb
= 0;
11542 bp
->common
.int_block
= INT_BLOCK_IGU
;
11544 /* do not allow device reset during IGU info processing */
11545 bnx2x_acquire_hw_lock(bp
, HW_LOCK_RESOURCE_RESET
);
11547 val
= REG_RD(bp
, IGU_REG_BLOCK_CONFIGURATION
);
11549 if (val
& IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN
) {
11552 BNX2X_DEV_INFO("FORCING Normal Mode\n");
11554 val
&= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN
);
11555 REG_WR(bp
, IGU_REG_BLOCK_CONFIGURATION
, val
);
11556 REG_WR(bp
, IGU_REG_RESET_MEMORIES
, 0x7f);
11558 while (tout
&& REG_RD(bp
, IGU_REG_RESET_MEMORIES
)) {
11560 usleep_range(1000, 2000);
11563 if (REG_RD(bp
, IGU_REG_RESET_MEMORIES
)) {
11564 dev_err(&bp
->pdev
->dev
,
11565 "FORCING Normal Mode failed!!!\n");
11566 bnx2x_release_hw_lock(bp
,
11567 HW_LOCK_RESOURCE_RESET
);
11572 if (val
& IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN
) {
11573 BNX2X_DEV_INFO("IGU Backward Compatible Mode\n");
11574 bp
->common
.int_block
|= INT_BLOCK_MODE_BW_COMP
;
11576 BNX2X_DEV_INFO("IGU Normal Mode\n");
11578 rc
= bnx2x_get_igu_cam_info(bp
);
11579 bnx2x_release_hw_lock(bp
, HW_LOCK_RESOURCE_RESET
);
11585 * set base FW non-default (fast path) status block id, this value is
11586 * used to initialize the fw_sb_id saved on the fp/queue structure to
11587 * determine the id used by the FW.
11589 if (CHIP_IS_E1x(bp
))
11590 bp
->base_fw_ndsb
= BP_PORT(bp
) * FP_SB_MAX_E1x
+ BP_L_ID(bp
);
11592 * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of
11593 * the same queue are indicated on the same IGU SB). So we prefer
11594 * FW and IGU SBs to be the same value.
11596 bp
->base_fw_ndsb
= bp
->igu_base_sb
;
11598 BNX2X_DEV_INFO("igu_dsb_id %d igu_base_sb %d igu_sb_cnt %d\n"
11599 "base_fw_ndsb %d\n", bp
->igu_dsb_id
, bp
->igu_base_sb
,
11600 bp
->igu_sb_cnt
, bp
->base_fw_ndsb
);
11603 * Initialize MF configuration
11610 if (!CHIP_IS_E1(bp
) && !BP_NOMCP(bp
)) {
11611 BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
11612 bp
->common
.shmem2_base
, SHMEM2_RD(bp
, size
),
11613 (u32
)offsetof(struct shmem2_region
, mf_cfg_addr
));
11615 if (SHMEM2_HAS(bp
, mf_cfg_addr
))
11616 bp
->common
.mf_cfg_base
= SHMEM2_RD(bp
, mf_cfg_addr
);
11618 bp
->common
.mf_cfg_base
= bp
->common
.shmem_base
+
11619 offsetof(struct shmem_region
, func_mb
) +
11620 E1H_FUNC_MAX
* sizeof(struct drv_func_mb
);
11622 * get mf configuration:
11623 * 1. Existence of MF configuration
11624 * 2. MAC address must be legal (check only upper bytes)
11625 * for Switch-Independent mode;
11626 * OVLAN must be legal for Switch-Dependent mode
11627 * 3. SF_MODE configures specific MF mode
11629 if (bp
->common
.mf_cfg_base
!= SHMEM_MF_CFG_ADDR_NONE
) {
11630 /* get mf configuration */
11632 dev_info
.shared_feature_config
.config
);
11633 val
&= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK
;
11636 case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT
:
11637 val
= MF_CFG_RD(bp
, func_mf_config
[func
].
11639 /* check for legal mac (upper bytes)*/
11640 if (val
!= 0xffff) {
11641 bp
->mf_mode
= MULTI_FUNCTION_SI
;
11642 bp
->mf_config
[vn
] = MF_CFG_RD(bp
,
11643 func_mf_config
[func
].config
);
11645 BNX2X_DEV_INFO("illegal MAC address for SI\n");
11647 case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE
:
11648 if ((!CHIP_IS_E1x(bp
)) &&
11649 (MF_CFG_RD(bp
, func_mf_config
[func
].
11650 mac_upper
) != 0xffff) &&
11652 afex_driver_support
))) {
11653 bp
->mf_mode
= MULTI_FUNCTION_AFEX
;
11654 bp
->mf_config
[vn
] = MF_CFG_RD(bp
,
11655 func_mf_config
[func
].config
);
11657 BNX2X_DEV_INFO("can not configure afex mode\n");
11660 case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED
:
11661 /* get OV configuration */
11662 val
= MF_CFG_RD(bp
,
11663 func_mf_config
[FUNC_0
].e1hov_tag
);
11664 val
&= FUNC_MF_CFG_E1HOV_TAG_MASK
;
11666 if (val
!= FUNC_MF_CFG_E1HOV_TAG_DEFAULT
) {
11667 bp
->mf_mode
= MULTI_FUNCTION_SD
;
11668 bp
->mf_config
[vn
] = MF_CFG_RD(bp
,
11669 func_mf_config
[func
].config
);
11671 BNX2X_DEV_INFO("illegal OV for SD\n");
11673 case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF
:
11674 bp
->mf_config
[vn
] = 0;
11677 /* Unknown configuration: reset mf_config */
11678 bp
->mf_config
[vn
] = 0;
11679 BNX2X_DEV_INFO("unknown MF mode 0x%x\n", val
);
11683 BNX2X_DEV_INFO("%s function mode\n",
11684 IS_MF(bp
) ? "multi" : "single");
11686 switch (bp
->mf_mode
) {
11687 case MULTI_FUNCTION_SD
:
11688 val
= MF_CFG_RD(bp
, func_mf_config
[func
].e1hov_tag
) &
11689 FUNC_MF_CFG_E1HOV_TAG_MASK
;
11690 if (val
!= FUNC_MF_CFG_E1HOV_TAG_DEFAULT
) {
11692 bp
->path_has_ovlan
= true;
11694 BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n",
11695 func
, bp
->mf_ov
, bp
->mf_ov
);
11697 dev_err(&bp
->pdev
->dev
,
11698 "No valid MF OV for func %d, aborting\n",
11703 case MULTI_FUNCTION_AFEX
:
11704 BNX2X_DEV_INFO("func %d is in MF afex mode\n", func
);
11706 case MULTI_FUNCTION_SI
:
11707 BNX2X_DEV_INFO("func %d is in MF switch-independent mode\n",
11712 dev_err(&bp
->pdev
->dev
,
11713 "VN %d is in a single function mode, aborting\n",
11720 /* check if other port on the path needs ovlan:
11721 * Since MF configuration is shared between ports
11722 * Possible mixed modes are only
11723 * {SF, SI} {SF, SD} {SD, SF} {SI, SF}
11725 if (CHIP_MODE_IS_4_PORT(bp
) &&
11726 !bp
->path_has_ovlan
&&
11728 bp
->common
.mf_cfg_base
!= SHMEM_MF_CFG_ADDR_NONE
) {
11729 u8 other_port
= !BP_PORT(bp
);
11730 u8 other_func
= BP_PATH(bp
) + 2*other_port
;
11731 val
= MF_CFG_RD(bp
,
11732 func_mf_config
[other_func
].e1hov_tag
);
11733 if (val
!= FUNC_MF_CFG_E1HOV_TAG_DEFAULT
)
11734 bp
->path_has_ovlan
= true;
11738 /* adjust igu_sb_cnt to MF for E1H */
11739 if (CHIP_IS_E1H(bp
) && IS_MF(bp
))
11740 bp
->igu_sb_cnt
= min_t(u8
, bp
->igu_sb_cnt
, E1H_MAX_MF_SB_COUNT
);
11743 bnx2x_get_port_hwinfo(bp
);
11745 /* Get MAC addresses */
11746 bnx2x_get_mac_hwinfo(bp
);
11748 bnx2x_get_cnic_info(bp
);
11753 static void bnx2x_read_fwinfo(struct bnx2x
*bp
)
11755 int cnt
, i
, block_end
, rodi
;
11756 char vpd_start
[BNX2X_VPD_LEN
+1];
11757 char str_id_reg
[VENDOR_ID_LEN
+1];
11758 char str_id_cap
[VENDOR_ID_LEN
+1];
11760 char *vpd_extended_data
= NULL
;
11763 cnt
= pci_read_vpd(bp
->pdev
, 0, BNX2X_VPD_LEN
, vpd_start
);
11764 memset(bp
->fw_ver
, 0, sizeof(bp
->fw_ver
));
11766 if (cnt
< BNX2X_VPD_LEN
)
11767 goto out_not_found
;
11769 /* VPD RO tag should be first tag after identifier string, hence
11770 * we should be able to find it in first BNX2X_VPD_LEN chars
11772 i
= pci_vpd_find_tag(vpd_start
, 0, BNX2X_VPD_LEN
,
11773 PCI_VPD_LRDT_RO_DATA
);
11775 goto out_not_found
;
11777 block_end
= i
+ PCI_VPD_LRDT_TAG_SIZE
+
11778 pci_vpd_lrdt_size(&vpd_start
[i
]);
11780 i
+= PCI_VPD_LRDT_TAG_SIZE
;
11782 if (block_end
> BNX2X_VPD_LEN
) {
11783 vpd_extended_data
= kmalloc(block_end
, GFP_KERNEL
);
11784 if (vpd_extended_data
== NULL
)
11785 goto out_not_found
;
11787 /* read rest of vpd image into vpd_extended_data */
11788 memcpy(vpd_extended_data
, vpd_start
, BNX2X_VPD_LEN
);
11789 cnt
= pci_read_vpd(bp
->pdev
, BNX2X_VPD_LEN
,
11790 block_end
- BNX2X_VPD_LEN
,
11791 vpd_extended_data
+ BNX2X_VPD_LEN
);
11792 if (cnt
< (block_end
- BNX2X_VPD_LEN
))
11793 goto out_not_found
;
11794 vpd_data
= vpd_extended_data
;
11796 vpd_data
= vpd_start
;
11798 /* now vpd_data holds full vpd content in both cases */
11800 rodi
= pci_vpd_find_info_keyword(vpd_data
, i
, block_end
,
11801 PCI_VPD_RO_KEYWORD_MFR_ID
);
11803 goto out_not_found
;
11805 len
= pci_vpd_info_field_size(&vpd_data
[rodi
]);
11807 if (len
!= VENDOR_ID_LEN
)
11808 goto out_not_found
;
11810 rodi
+= PCI_VPD_INFO_FLD_HDR_SIZE
;
11812 /* vendor specific info */
11813 snprintf(str_id_reg
, VENDOR_ID_LEN
+ 1, "%04x", PCI_VENDOR_ID_DELL
);
11814 snprintf(str_id_cap
, VENDOR_ID_LEN
+ 1, "%04X", PCI_VENDOR_ID_DELL
);
11815 if (!strncmp(str_id_reg
, &vpd_data
[rodi
], VENDOR_ID_LEN
) ||
11816 !strncmp(str_id_cap
, &vpd_data
[rodi
], VENDOR_ID_LEN
)) {
11818 rodi
= pci_vpd_find_info_keyword(vpd_data
, i
, block_end
,
11819 PCI_VPD_RO_KEYWORD_VENDOR0
);
11821 len
= pci_vpd_info_field_size(&vpd_data
[rodi
]);
11823 rodi
+= PCI_VPD_INFO_FLD_HDR_SIZE
;
11825 if (len
< 32 && (len
+ rodi
) <= BNX2X_VPD_LEN
) {
11826 memcpy(bp
->fw_ver
, &vpd_data
[rodi
], len
);
11827 bp
->fw_ver
[len
] = ' ';
11830 kfree(vpd_extended_data
);
11834 kfree(vpd_extended_data
);
11838 static void bnx2x_set_modes_bitmap(struct bnx2x
*bp
)
11842 if (CHIP_REV_IS_FPGA(bp
))
11843 SET_FLAGS(flags
, MODE_FPGA
);
11844 else if (CHIP_REV_IS_EMUL(bp
))
11845 SET_FLAGS(flags
, MODE_EMUL
);
11847 SET_FLAGS(flags
, MODE_ASIC
);
11849 if (CHIP_MODE_IS_4_PORT(bp
))
11850 SET_FLAGS(flags
, MODE_PORT4
);
11852 SET_FLAGS(flags
, MODE_PORT2
);
11854 if (CHIP_IS_E2(bp
))
11855 SET_FLAGS(flags
, MODE_E2
);
11856 else if (CHIP_IS_E3(bp
)) {
11857 SET_FLAGS(flags
, MODE_E3
);
11858 if (CHIP_REV(bp
) == CHIP_REV_Ax
)
11859 SET_FLAGS(flags
, MODE_E3_A0
);
11860 else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/
11861 SET_FLAGS(flags
, MODE_E3_B0
| MODE_COS3
);
11865 SET_FLAGS(flags
, MODE_MF
);
11866 switch (bp
->mf_mode
) {
11867 case MULTI_FUNCTION_SD
:
11868 SET_FLAGS(flags
, MODE_MF_SD
);
11870 case MULTI_FUNCTION_SI
:
11871 SET_FLAGS(flags
, MODE_MF_SI
);
11873 case MULTI_FUNCTION_AFEX
:
11874 SET_FLAGS(flags
, MODE_MF_AFEX
);
11878 SET_FLAGS(flags
, MODE_SF
);
11880 #if defined(__LITTLE_ENDIAN)
11881 SET_FLAGS(flags
, MODE_LITTLE_ENDIAN
);
11882 #else /*(__BIG_ENDIAN)*/
11883 SET_FLAGS(flags
, MODE_BIG_ENDIAN
);
11885 INIT_MODE_FLAGS(bp
) = flags
;
11888 static int bnx2x_init_bp(struct bnx2x
*bp
)
11893 mutex_init(&bp
->port
.phy_mutex
);
11894 mutex_init(&bp
->fw_mb_mutex
);
11895 mutex_init(&bp
->drv_info_mutex
);
11896 bp
->drv_info_mng_owner
= false;
11897 spin_lock_init(&bp
->stats_lock
);
11898 sema_init(&bp
->stats_sema
, 1);
11900 INIT_DELAYED_WORK(&bp
->sp_task
, bnx2x_sp_task
);
11901 INIT_DELAYED_WORK(&bp
->sp_rtnl_task
, bnx2x_sp_rtnl_task
);
11902 INIT_DELAYED_WORK(&bp
->period_task
, bnx2x_period_task
);
11903 INIT_DELAYED_WORK(&bp
->iov_task
, bnx2x_iov_task
);
11905 rc
= bnx2x_get_hwinfo(bp
);
11909 eth_zero_addr(bp
->dev
->dev_addr
);
11912 bnx2x_set_modes_bitmap(bp
);
11914 rc
= bnx2x_alloc_mem_bp(bp
);
11918 bnx2x_read_fwinfo(bp
);
11920 func
= BP_FUNC(bp
);
11922 /* need to reset chip if undi was active */
11923 if (IS_PF(bp
) && !BP_NOMCP(bp
)) {
11926 SHMEM_RD(bp
, func_mb
[BP_FW_MB_IDX(bp
)].drv_mb_header
) &
11927 DRV_MSG_SEQ_NUMBER_MASK
;
11928 BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp
->fw_seq
);
11930 rc
= bnx2x_prev_unload(bp
);
11932 bnx2x_free_mem_bp(bp
);
11937 if (CHIP_REV_IS_FPGA(bp
))
11938 dev_err(&bp
->pdev
->dev
, "FPGA detected\n");
11940 if (BP_NOMCP(bp
) && (func
== 0))
11941 dev_err(&bp
->pdev
->dev
, "MCP disabled, must load devices in order!\n");
11943 bp
->disable_tpa
= disable_tpa
;
11944 bp
->disable_tpa
|= IS_MF_STORAGE_SD(bp
) || IS_MF_FCOE_AFEX(bp
);
11945 /* Reduce memory usage in kdump environment by disabling TPA */
11946 bp
->disable_tpa
|= reset_devices
;
11948 /* Set TPA flags */
11949 if (bp
->disable_tpa
) {
11950 bp
->flags
&= ~(TPA_ENABLE_FLAG
| GRO_ENABLE_FLAG
);
11951 bp
->dev
->features
&= ~NETIF_F_LRO
;
11953 bp
->flags
|= (TPA_ENABLE_FLAG
| GRO_ENABLE_FLAG
);
11954 bp
->dev
->features
|= NETIF_F_LRO
;
11957 if (CHIP_IS_E1(bp
))
11958 bp
->dropless_fc
= 0;
11960 bp
->dropless_fc
= dropless_fc
| bnx2x_get_dropless_info(bp
);
11964 bp
->tx_ring_size
= IS_MF_FCOE_AFEX(bp
) ? 0 : MAX_TX_AVAIL
;
11966 bp
->rx_ring_size
= MAX_RX_AVAIL
;
11968 /* make sure that the numbers are in the right granularity */
11969 bp
->tx_ticks
= (50 / BNX2X_BTR
) * BNX2X_BTR
;
11970 bp
->rx_ticks
= (25 / BNX2X_BTR
) * BNX2X_BTR
;
11972 bp
->current_interval
= CHIP_REV_IS_SLOW(bp
) ? 5*HZ
: HZ
;
11974 init_timer(&bp
->timer
);
11975 bp
->timer
.expires
= jiffies
+ bp
->current_interval
;
11976 bp
->timer
.data
= (unsigned long) bp
;
11977 bp
->timer
.function
= bnx2x_timer
;
11979 if (SHMEM2_HAS(bp
, dcbx_lldp_params_offset
) &&
11980 SHMEM2_HAS(bp
, dcbx_lldp_dcbx_stat_offset
) &&
11981 SHMEM2_RD(bp
, dcbx_lldp_params_offset
) &&
11982 SHMEM2_RD(bp
, dcbx_lldp_dcbx_stat_offset
)) {
11983 bnx2x_dcbx_set_state(bp
, true, BNX2X_DCBX_ENABLED_ON_NEG_ON
);
11984 bnx2x_dcbx_init_params(bp
);
11986 bnx2x_dcbx_set_state(bp
, false, BNX2X_DCBX_ENABLED_OFF
);
11989 if (CHIP_IS_E1x(bp
))
11990 bp
->cnic_base_cl_id
= FP_SB_MAX_E1x
;
11992 bp
->cnic_base_cl_id
= FP_SB_MAX_E2
;
11994 /* multiple tx priority */
11997 else if (CHIP_IS_E1x(bp
))
11998 bp
->max_cos
= BNX2X_MULTI_TX_COS_E1X
;
11999 else if (CHIP_IS_E2(bp
) || CHIP_IS_E3A0(bp
))
12000 bp
->max_cos
= BNX2X_MULTI_TX_COS_E2_E3A0
;
12001 else if (CHIP_IS_E3B0(bp
))
12002 bp
->max_cos
= BNX2X_MULTI_TX_COS_E3B0
;
12004 BNX2X_ERR("unknown chip %x revision %x\n",
12005 CHIP_NUM(bp
), CHIP_REV(bp
));
12006 BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp
->max_cos
);
12008 /* We need at least one default status block for slow-path events,
12009 * second status block for the L2 queue, and a third status block for
12010 * CNIC if supported.
12013 bp
->min_msix_vec_cnt
= 1;
12014 else if (CNIC_SUPPORT(bp
))
12015 bp
->min_msix_vec_cnt
= 3;
12016 else /* PF w/o cnic */
12017 bp
->min_msix_vec_cnt
= 2;
12018 BNX2X_DEV_INFO("bp->min_msix_vec_cnt %d", bp
->min_msix_vec_cnt
);
12020 bp
->dump_preset_idx
= 1;
12025 /****************************************************************************
12026 * General service functions
12027 ****************************************************************************/
12030 * net_device service functions
12033 /* called with rtnl_lock */
12034 static int bnx2x_open(struct net_device
*dev
)
12036 struct bnx2x
*bp
= netdev_priv(dev
);
12039 bp
->stats_init
= true;
12041 netif_carrier_off(dev
);
12043 bnx2x_set_power_state(bp
, PCI_D0
);
12045 /* If parity had happen during the unload, then attentions
12046 * and/or RECOVERY_IN_PROGRES may still be set. In this case we
12047 * want the first function loaded on the current engine to
12048 * complete the recovery.
12049 * Parity recovery is only relevant for PF driver.
12052 int other_engine
= BP_PATH(bp
) ? 0 : 1;
12053 bool other_load_status
, load_status
;
12054 bool global
= false;
12056 other_load_status
= bnx2x_get_load_status(bp
, other_engine
);
12057 load_status
= bnx2x_get_load_status(bp
, BP_PATH(bp
));
12058 if (!bnx2x_reset_is_done(bp
, BP_PATH(bp
)) ||
12059 bnx2x_chk_parity_attn(bp
, &global
, true)) {
12061 /* If there are attentions and they are in a
12062 * global blocks, set the GLOBAL_RESET bit
12063 * regardless whether it will be this function
12064 * that will complete the recovery or not.
12067 bnx2x_set_reset_global(bp
);
12069 /* Only the first function on the current
12070 * engine should try to recover in open. In case
12071 * of attentions in global blocks only the first
12072 * in the chip should try to recover.
12074 if ((!load_status
&&
12075 (!global
|| !other_load_status
)) &&
12076 bnx2x_trylock_leader_lock(bp
) &&
12077 !bnx2x_leader_reset(bp
)) {
12078 netdev_info(bp
->dev
,
12079 "Recovered in open\n");
12083 /* recovery has failed... */
12084 bnx2x_set_power_state(bp
, PCI_D3hot
);
12085 bp
->recovery_state
= BNX2X_RECOVERY_FAILED
;
12087 BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n"
12088 "If you still see this message after a few retries then power cycle is required.\n");
12095 bp
->recovery_state
= BNX2X_RECOVERY_DONE
;
12096 rc
= bnx2x_nic_load(bp
, LOAD_OPEN
);
12102 /* called with rtnl_lock */
12103 static int bnx2x_close(struct net_device
*dev
)
12105 struct bnx2x
*bp
= netdev_priv(dev
);
12107 /* Unload the driver, release IRQs */
12108 bnx2x_nic_unload(bp
, UNLOAD_CLOSE
, false);
12113 static int bnx2x_init_mcast_macs_list(struct bnx2x
*bp
,
12114 struct bnx2x_mcast_ramrod_params
*p
)
12116 int mc_count
= netdev_mc_count(bp
->dev
);
12117 struct bnx2x_mcast_list_elem
*mc_mac
=
12118 kcalloc(mc_count
, sizeof(*mc_mac
), GFP_ATOMIC
);
12119 struct netdev_hw_addr
*ha
;
12124 INIT_LIST_HEAD(&p
->mcast_list
);
12126 netdev_for_each_mc_addr(ha
, bp
->dev
) {
12127 mc_mac
->mac
= bnx2x_mc_addr(ha
);
12128 list_add_tail(&mc_mac
->link
, &p
->mcast_list
);
12132 p
->mcast_list_len
= mc_count
;
12137 static void bnx2x_free_mcast_macs_list(
12138 struct bnx2x_mcast_ramrod_params
*p
)
12140 struct bnx2x_mcast_list_elem
*mc_mac
=
12141 list_first_entry(&p
->mcast_list
, struct bnx2x_mcast_list_elem
,
12149 * bnx2x_set_uc_list - configure a new unicast MACs list.
12151 * @bp: driver handle
12153 * We will use zero (0) as a MAC type for these MACs.
12155 static int bnx2x_set_uc_list(struct bnx2x
*bp
)
12158 struct net_device
*dev
= bp
->dev
;
12159 struct netdev_hw_addr
*ha
;
12160 struct bnx2x_vlan_mac_obj
*mac_obj
= &bp
->sp_objs
->mac_obj
;
12161 unsigned long ramrod_flags
= 0;
12163 /* First schedule a cleanup up of old configuration */
12164 rc
= bnx2x_del_all_macs(bp
, mac_obj
, BNX2X_UC_LIST_MAC
, false);
12166 BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc
);
12170 netdev_for_each_uc_addr(ha
, dev
) {
12171 rc
= bnx2x_set_mac_one(bp
, bnx2x_uc_addr(ha
), mac_obj
, true,
12172 BNX2X_UC_LIST_MAC
, &ramrod_flags
);
12173 if (rc
== -EEXIST
) {
12175 "Failed to schedule ADD operations: %d\n", rc
);
12176 /* do not treat adding same MAC as error */
12179 } else if (rc
< 0) {
12181 BNX2X_ERR("Failed to schedule ADD operations: %d\n",
12187 /* Execute the pending commands */
12188 __set_bit(RAMROD_CONT
, &ramrod_flags
);
12189 return bnx2x_set_mac_one(bp
, NULL
, mac_obj
, false /* don't care */,
12190 BNX2X_UC_LIST_MAC
, &ramrod_flags
);
12193 static int bnx2x_set_mc_list(struct bnx2x
*bp
)
12195 struct net_device
*dev
= bp
->dev
;
12196 struct bnx2x_mcast_ramrod_params rparam
= {NULL
};
12199 rparam
.mcast_obj
= &bp
->mcast_obj
;
12201 /* first, clear all configured multicast MACs */
12202 rc
= bnx2x_config_mcast(bp
, &rparam
, BNX2X_MCAST_CMD_DEL
);
12204 BNX2X_ERR("Failed to clear multicast configuration: %d\n", rc
);
12208 /* then, configure a new MACs list */
12209 if (netdev_mc_count(dev
)) {
12210 rc
= bnx2x_init_mcast_macs_list(bp
, &rparam
);
12212 BNX2X_ERR("Failed to create multicast MACs list: %d\n",
12217 /* Now add the new MACs */
12218 rc
= bnx2x_config_mcast(bp
, &rparam
,
12219 BNX2X_MCAST_CMD_ADD
);
12221 BNX2X_ERR("Failed to set a new multicast configuration: %d\n",
12224 bnx2x_free_mcast_macs_list(&rparam
);
12230 /* If bp->state is OPEN, should be called with netif_addr_lock_bh() */
12231 static void bnx2x_set_rx_mode(struct net_device
*dev
)
12233 struct bnx2x
*bp
= netdev_priv(dev
);
12235 if (bp
->state
!= BNX2X_STATE_OPEN
) {
12236 DP(NETIF_MSG_IFUP
, "state is %x, returning\n", bp
->state
);
12239 /* Schedule an SP task to handle rest of change */
12240 bnx2x_schedule_sp_rtnl(bp
, BNX2X_SP_RTNL_RX_MODE
,
12245 void bnx2x_set_rx_mode_inner(struct bnx2x
*bp
)
12247 u32 rx_mode
= BNX2X_RX_MODE_NORMAL
;
12249 DP(NETIF_MSG_IFUP
, "dev->flags = %x\n", bp
->dev
->flags
);
12251 netif_addr_lock_bh(bp
->dev
);
12253 if (bp
->dev
->flags
& IFF_PROMISC
) {
12254 rx_mode
= BNX2X_RX_MODE_PROMISC
;
12255 } else if ((bp
->dev
->flags
& IFF_ALLMULTI
) ||
12256 ((netdev_mc_count(bp
->dev
) > BNX2X_MAX_MULTICAST
) &&
12258 rx_mode
= BNX2X_RX_MODE_ALLMULTI
;
12261 /* some multicasts */
12262 if (bnx2x_set_mc_list(bp
) < 0)
12263 rx_mode
= BNX2X_RX_MODE_ALLMULTI
;
12265 /* release bh lock, as bnx2x_set_uc_list might sleep */
12266 netif_addr_unlock_bh(bp
->dev
);
12267 if (bnx2x_set_uc_list(bp
) < 0)
12268 rx_mode
= BNX2X_RX_MODE_PROMISC
;
12269 netif_addr_lock_bh(bp
->dev
);
12271 /* configuring mcast to a vf involves sleeping (when we
12272 * wait for the pf's response).
12274 bnx2x_schedule_sp_rtnl(bp
,
12275 BNX2X_SP_RTNL_VFPF_MCAST
, 0);
12279 bp
->rx_mode
= rx_mode
;
12280 /* handle ISCSI SD mode */
12281 if (IS_MF_ISCSI_SD(bp
))
12282 bp
->rx_mode
= BNX2X_RX_MODE_NONE
;
12284 /* Schedule the rx_mode command */
12285 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
)) {
12286 set_bit(BNX2X_FILTER_RX_MODE_SCHED
, &bp
->sp_state
);
12287 netif_addr_unlock_bh(bp
->dev
);
12292 bnx2x_set_storm_rx_mode(bp
);
12293 netif_addr_unlock_bh(bp
->dev
);
12295 /* VF will need to request the PF to make this change, and so
12296 * the VF needs to release the bottom-half lock prior to the
12297 * request (as it will likely require sleep on the VF side)
12299 netif_addr_unlock_bh(bp
->dev
);
12300 bnx2x_vfpf_storm_rx_mode(bp
);
12304 /* called with rtnl_lock */
12305 static int bnx2x_mdio_read(struct net_device
*netdev
, int prtad
,
12306 int devad
, u16 addr
)
12308 struct bnx2x
*bp
= netdev_priv(netdev
);
12312 DP(NETIF_MSG_LINK
, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",
12313 prtad
, devad
, addr
);
12315 /* The HW expects different devad if CL22 is used */
12316 devad
= (devad
== MDIO_DEVAD_NONE
) ? DEFAULT_PHY_DEV_ADDR
: devad
;
12318 bnx2x_acquire_phy_lock(bp
);
12319 rc
= bnx2x_phy_read(&bp
->link_params
, prtad
, devad
, addr
, &value
);
12320 bnx2x_release_phy_lock(bp
);
12321 DP(NETIF_MSG_LINK
, "mdio_read_val 0x%x rc = 0x%x\n", value
, rc
);
12328 /* called with rtnl_lock */
12329 static int bnx2x_mdio_write(struct net_device
*netdev
, int prtad
, int devad
,
12330 u16 addr
, u16 value
)
12332 struct bnx2x
*bp
= netdev_priv(netdev
);
12336 "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x, value 0x%x\n",
12337 prtad
, devad
, addr
, value
);
12339 /* The HW expects different devad if CL22 is used */
12340 devad
= (devad
== MDIO_DEVAD_NONE
) ? DEFAULT_PHY_DEV_ADDR
: devad
;
12342 bnx2x_acquire_phy_lock(bp
);
12343 rc
= bnx2x_phy_write(&bp
->link_params
, prtad
, devad
, addr
, value
);
12344 bnx2x_release_phy_lock(bp
);
12348 /* called with rtnl_lock */
12349 static int bnx2x_ioctl(struct net_device
*dev
, struct ifreq
*ifr
, int cmd
)
12351 struct bnx2x
*bp
= netdev_priv(dev
);
12352 struct mii_ioctl_data
*mdio
= if_mii(ifr
);
12354 DP(NETIF_MSG_LINK
, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n",
12355 mdio
->phy_id
, mdio
->reg_num
, mdio
->val_in
);
12357 if (!netif_running(dev
))
12360 return mdio_mii_ioctl(&bp
->mdio
, mdio
, cmd
);
12363 #ifdef CONFIG_NET_POLL_CONTROLLER
12364 static void poll_bnx2x(struct net_device
*dev
)
12366 struct bnx2x
*bp
= netdev_priv(dev
);
12369 for_each_eth_queue(bp
, i
) {
12370 struct bnx2x_fastpath
*fp
= &bp
->fp
[i
];
12371 napi_schedule(&bnx2x_fp(bp
, fp
->index
, napi
));
12376 static int bnx2x_validate_addr(struct net_device
*dev
)
12378 struct bnx2x
*bp
= netdev_priv(dev
);
12380 /* query the bulletin board for mac address configured by the PF */
12382 bnx2x_sample_bulletin(bp
);
12384 if (!bnx2x_is_valid_ether_addr(bp
, dev
->dev_addr
)) {
12385 BNX2X_ERR("Non-valid Ethernet address\n");
12386 return -EADDRNOTAVAIL
;
12391 static int bnx2x_get_phys_port_id(struct net_device
*netdev
,
12392 struct netdev_phys_port_id
*ppid
)
12394 struct bnx2x
*bp
= netdev_priv(netdev
);
12396 if (!(bp
->flags
& HAS_PHYS_PORT_ID
))
12397 return -EOPNOTSUPP
;
12399 ppid
->id_len
= sizeof(bp
->phys_port_id
);
12400 memcpy(ppid
->id
, bp
->phys_port_id
, ppid
->id_len
);
12405 static const struct net_device_ops bnx2x_netdev_ops
= {
12406 .ndo_open
= bnx2x_open
,
12407 .ndo_stop
= bnx2x_close
,
12408 .ndo_start_xmit
= bnx2x_start_xmit
,
12409 .ndo_select_queue
= bnx2x_select_queue
,
12410 .ndo_set_rx_mode
= bnx2x_set_rx_mode
,
12411 .ndo_set_mac_address
= bnx2x_change_mac_addr
,
12412 .ndo_validate_addr
= bnx2x_validate_addr
,
12413 .ndo_do_ioctl
= bnx2x_ioctl
,
12414 .ndo_change_mtu
= bnx2x_change_mtu
,
12415 .ndo_fix_features
= bnx2x_fix_features
,
12416 .ndo_set_features
= bnx2x_set_features
,
12417 .ndo_tx_timeout
= bnx2x_tx_timeout
,
12418 #ifdef CONFIG_NET_POLL_CONTROLLER
12419 .ndo_poll_controller
= poll_bnx2x
,
12421 .ndo_setup_tc
= bnx2x_setup_tc
,
12422 #ifdef CONFIG_BNX2X_SRIOV
12423 .ndo_set_vf_mac
= bnx2x_set_vf_mac
,
12424 .ndo_set_vf_vlan
= bnx2x_set_vf_vlan
,
12425 .ndo_get_vf_config
= bnx2x_get_vf_config
,
12427 #ifdef NETDEV_FCOE_WWNN
12428 .ndo_fcoe_get_wwn
= bnx2x_fcoe_get_wwn
,
12431 #ifdef CONFIG_NET_RX_BUSY_POLL
12432 .ndo_busy_poll
= bnx2x_low_latency_recv
,
12434 .ndo_get_phys_port_id
= bnx2x_get_phys_port_id
,
12435 .ndo_set_vf_link_state
= bnx2x_set_vf_link_state
,
12438 static int bnx2x_set_coherency_mask(struct bnx2x
*bp
)
12440 struct device
*dev
= &bp
->pdev
->dev
;
12442 if (dma_set_mask_and_coherent(dev
, DMA_BIT_MASK(64)) != 0 &&
12443 dma_set_mask_and_coherent(dev
, DMA_BIT_MASK(32)) != 0) {
12444 dev_err(dev
, "System does not support DMA, aborting\n");
12451 static void bnx2x_disable_pcie_error_reporting(struct bnx2x
*bp
)
12453 if (bp
->flags
& AER_ENABLED
) {
12454 pci_disable_pcie_error_reporting(bp
->pdev
);
12455 bp
->flags
&= ~AER_ENABLED
;
12459 static int bnx2x_init_dev(struct bnx2x
*bp
, struct pci_dev
*pdev
,
12460 struct net_device
*dev
, unsigned long board_type
)
12464 bool chip_is_e1x
= (board_type
== BCM57710
||
12465 board_type
== BCM57711
||
12466 board_type
== BCM57711E
);
12468 SET_NETDEV_DEV(dev
, &pdev
->dev
);
12473 rc
= pci_enable_device(pdev
);
12475 dev_err(&bp
->pdev
->dev
,
12476 "Cannot enable PCI device, aborting\n");
12480 if (!(pci_resource_flags(pdev
, 0) & IORESOURCE_MEM
)) {
12481 dev_err(&bp
->pdev
->dev
,
12482 "Cannot find PCI device base address, aborting\n");
12484 goto err_out_disable
;
12487 if (IS_PF(bp
) && !(pci_resource_flags(pdev
, 2) & IORESOURCE_MEM
)) {
12488 dev_err(&bp
->pdev
->dev
, "Cannot find second PCI device base address, aborting\n");
12490 goto err_out_disable
;
12493 pci_read_config_dword(pdev
, PCICFG_REVISION_ID_OFFSET
, &pci_cfg_dword
);
12494 if ((pci_cfg_dword
& PCICFG_REVESION_ID_MASK
) ==
12495 PCICFG_REVESION_ID_ERROR_VAL
) {
12496 pr_err("PCI device error, probably due to fan failure, aborting\n");
12498 goto err_out_disable
;
12501 if (atomic_read(&pdev
->enable_cnt
) == 1) {
12502 rc
= pci_request_regions(pdev
, DRV_MODULE_NAME
);
12504 dev_err(&bp
->pdev
->dev
,
12505 "Cannot obtain PCI resources, aborting\n");
12506 goto err_out_disable
;
12509 pci_set_master(pdev
);
12510 pci_save_state(pdev
);
12514 if (!pdev
->pm_cap
) {
12515 dev_err(&bp
->pdev
->dev
,
12516 "Cannot find power management capability, aborting\n");
12518 goto err_out_release
;
12522 if (!pci_is_pcie(pdev
)) {
12523 dev_err(&bp
->pdev
->dev
, "Not PCI Express, aborting\n");
12525 goto err_out_release
;
12528 rc
= bnx2x_set_coherency_mask(bp
);
12530 goto err_out_release
;
12532 dev
->mem_start
= pci_resource_start(pdev
, 0);
12533 dev
->base_addr
= dev
->mem_start
;
12534 dev
->mem_end
= pci_resource_end(pdev
, 0);
12536 dev
->irq
= pdev
->irq
;
12538 bp
->regview
= pci_ioremap_bar(pdev
, 0);
12539 if (!bp
->regview
) {
12540 dev_err(&bp
->pdev
->dev
,
12541 "Cannot map register space, aborting\n");
12543 goto err_out_release
;
12546 /* In E1/E1H use pci device function given by kernel.
12547 * In E2/E3 read physical function from ME register since these chips
12548 * support Physical Device Assignment where kernel BDF maybe arbitrary
12549 * (depending on hypervisor).
12552 bp
->pf_num
= PCI_FUNC(pdev
->devfn
);
12555 pci_read_config_dword(bp
->pdev
,
12556 PCICFG_ME_REGISTER
, &pci_cfg_dword
);
12557 bp
->pf_num
= (u8
)((pci_cfg_dword
& ME_REG_ABS_PF_NUM
) >>
12558 ME_REG_ABS_PF_NUM_SHIFT
);
12560 BNX2X_DEV_INFO("me reg PF num: %d\n", bp
->pf_num
);
12562 /* clean indirect addresses */
12563 pci_write_config_dword(bp
->pdev
, PCICFG_GRC_ADDRESS
,
12564 PCICFG_VENDOR_ID_OFFSET
);
12566 /* AER (Advanced Error reporting) configuration */
12567 rc
= pci_enable_pcie_error_reporting(pdev
);
12569 bp
->flags
|= AER_ENABLED
;
12571 BNX2X_DEV_INFO("Failed To configure PCIe AER [%d]\n", rc
);
12574 * Clean the following indirect addresses for all functions since it
12575 * is not used by the driver.
12578 REG_WR(bp
, PXP2_REG_PGL_ADDR_88_F0
, 0);
12579 REG_WR(bp
, PXP2_REG_PGL_ADDR_8C_F0
, 0);
12580 REG_WR(bp
, PXP2_REG_PGL_ADDR_90_F0
, 0);
12581 REG_WR(bp
, PXP2_REG_PGL_ADDR_94_F0
, 0);
12584 REG_WR(bp
, PXP2_REG_PGL_ADDR_88_F1
, 0);
12585 REG_WR(bp
, PXP2_REG_PGL_ADDR_8C_F1
, 0);
12586 REG_WR(bp
, PXP2_REG_PGL_ADDR_90_F1
, 0);
12587 REG_WR(bp
, PXP2_REG_PGL_ADDR_94_F1
, 0);
12590 /* Enable internal target-read (in case we are probed after PF
12591 * FLR). Must be done prior to any BAR read access. Only for
12596 PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ
, 1);
12599 dev
->watchdog_timeo
= TX_TIMEOUT
;
12601 dev
->netdev_ops
= &bnx2x_netdev_ops
;
12602 bnx2x_set_ethtool_ops(bp
, dev
);
12604 dev
->priv_flags
|= IFF_UNICAST_FLT
;
12606 dev
->hw_features
= NETIF_F_SG
| NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
12607 NETIF_F_TSO
| NETIF_F_TSO_ECN
| NETIF_F_TSO6
|
12608 NETIF_F_RXCSUM
| NETIF_F_LRO
| NETIF_F_GRO
|
12609 NETIF_F_RXHASH
| NETIF_F_HW_VLAN_CTAG_TX
;
12610 if (!CHIP_IS_E1x(bp
)) {
12611 dev
->hw_features
|= NETIF_F_GSO_GRE
| NETIF_F_GSO_UDP_TUNNEL
|
12612 NETIF_F_GSO_IPIP
| NETIF_F_GSO_SIT
;
12613 dev
->hw_enc_features
=
12614 NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
| NETIF_F_SG
|
12615 NETIF_F_TSO
| NETIF_F_TSO_ECN
| NETIF_F_TSO6
|
12618 NETIF_F_GSO_GRE
| NETIF_F_GSO_UDP_TUNNEL
;
12621 dev
->vlan_features
= NETIF_F_SG
| NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
12622 NETIF_F_TSO
| NETIF_F_TSO_ECN
| NETIF_F_TSO6
| NETIF_F_HIGHDMA
;
12624 dev
->features
|= dev
->hw_features
| NETIF_F_HW_VLAN_CTAG_RX
;
12625 dev
->features
|= NETIF_F_HIGHDMA
;
12627 /* Add Loopback capability to the device */
12628 dev
->hw_features
|= NETIF_F_LOOPBACK
;
12631 dev
->dcbnl_ops
= &bnx2x_dcbnl_ops
;
12634 /* get_port_hwinfo() will set prtad and mmds properly */
12635 bp
->mdio
.prtad
= MDIO_PRTAD_NONE
;
12637 bp
->mdio
.mode_support
= MDIO_SUPPORTS_C45
| MDIO_EMULATE_C22
;
12638 bp
->mdio
.dev
= dev
;
12639 bp
->mdio
.mdio_read
= bnx2x_mdio_read
;
12640 bp
->mdio
.mdio_write
= bnx2x_mdio_write
;
12645 if (atomic_read(&pdev
->enable_cnt
) == 1)
12646 pci_release_regions(pdev
);
12649 pci_disable_device(pdev
);
12655 static int bnx2x_check_firmware(struct bnx2x
*bp
)
12657 const struct firmware
*firmware
= bp
->firmware
;
12658 struct bnx2x_fw_file_hdr
*fw_hdr
;
12659 struct bnx2x_fw_file_section
*sections
;
12660 u32 offset
, len
, num_ops
;
12661 __be16
*ops_offsets
;
12665 if (firmware
->size
< sizeof(struct bnx2x_fw_file_hdr
)) {
12666 BNX2X_ERR("Wrong FW size\n");
12670 fw_hdr
= (struct bnx2x_fw_file_hdr
*)firmware
->data
;
12671 sections
= (struct bnx2x_fw_file_section
*)fw_hdr
;
12673 /* Make sure none of the offsets and sizes make us read beyond
12674 * the end of the firmware data */
12675 for (i
= 0; i
< sizeof(*fw_hdr
) / sizeof(*sections
); i
++) {
12676 offset
= be32_to_cpu(sections
[i
].offset
);
12677 len
= be32_to_cpu(sections
[i
].len
);
12678 if (offset
+ len
> firmware
->size
) {
12679 BNX2X_ERR("Section %d length is out of bounds\n", i
);
12684 /* Likewise for the init_ops offsets */
12685 offset
= be32_to_cpu(fw_hdr
->init_ops_offsets
.offset
);
12686 ops_offsets
= (__force __be16
*)(firmware
->data
+ offset
);
12687 num_ops
= be32_to_cpu(fw_hdr
->init_ops
.len
) / sizeof(struct raw_op
);
12689 for (i
= 0; i
< be32_to_cpu(fw_hdr
->init_ops_offsets
.len
) / 2; i
++) {
12690 if (be16_to_cpu(ops_offsets
[i
]) > num_ops
) {
12691 BNX2X_ERR("Section offset %d is out of bounds\n", i
);
12696 /* Check FW version */
12697 offset
= be32_to_cpu(fw_hdr
->fw_version
.offset
);
12698 fw_ver
= firmware
->data
+ offset
;
12699 if ((fw_ver
[0] != BCM_5710_FW_MAJOR_VERSION
) ||
12700 (fw_ver
[1] != BCM_5710_FW_MINOR_VERSION
) ||
12701 (fw_ver
[2] != BCM_5710_FW_REVISION_VERSION
) ||
12702 (fw_ver
[3] != BCM_5710_FW_ENGINEERING_VERSION
)) {
12703 BNX2X_ERR("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
12704 fw_ver
[0], fw_ver
[1], fw_ver
[2], fw_ver
[3],
12705 BCM_5710_FW_MAJOR_VERSION
,
12706 BCM_5710_FW_MINOR_VERSION
,
12707 BCM_5710_FW_REVISION_VERSION
,
12708 BCM_5710_FW_ENGINEERING_VERSION
);
12715 static void be32_to_cpu_n(const u8
*_source
, u8
*_target
, u32 n
)
12717 const __be32
*source
= (const __be32
*)_source
;
12718 u32
*target
= (u32
*)_target
;
12721 for (i
= 0; i
< n
/4; i
++)
12722 target
[i
] = be32_to_cpu(source
[i
]);
12726 Ops array is stored in the following format:
12727 {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
12729 static void bnx2x_prep_ops(const u8
*_source
, u8
*_target
, u32 n
)
12731 const __be32
*source
= (const __be32
*)_source
;
12732 struct raw_op
*target
= (struct raw_op
*)_target
;
12735 for (i
= 0, j
= 0; i
< n
/8; i
++, j
+= 2) {
12736 tmp
= be32_to_cpu(source
[j
]);
12737 target
[i
].op
= (tmp
>> 24) & 0xff;
12738 target
[i
].offset
= tmp
& 0xffffff;
12739 target
[i
].raw_data
= be32_to_cpu(source
[j
+ 1]);
12743 /* IRO array is stored in the following format:
12744 * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) }
12746 static void bnx2x_prep_iro(const u8
*_source
, u8
*_target
, u32 n
)
12748 const __be32
*source
= (const __be32
*)_source
;
12749 struct iro
*target
= (struct iro
*)_target
;
12752 for (i
= 0, j
= 0; i
< n
/sizeof(struct iro
); i
++) {
12753 target
[i
].base
= be32_to_cpu(source
[j
]);
12755 tmp
= be32_to_cpu(source
[j
]);
12756 target
[i
].m1
= (tmp
>> 16) & 0xffff;
12757 target
[i
].m2
= tmp
& 0xffff;
12759 tmp
= be32_to_cpu(source
[j
]);
12760 target
[i
].m3
= (tmp
>> 16) & 0xffff;
12761 target
[i
].size
= tmp
& 0xffff;
12766 static void be16_to_cpu_n(const u8
*_source
, u8
*_target
, u32 n
)
12768 const __be16
*source
= (const __be16
*)_source
;
12769 u16
*target
= (u16
*)_target
;
12772 for (i
= 0; i
< n
/2; i
++)
12773 target
[i
] = be16_to_cpu(source
[i
]);
12776 #define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
12778 u32 len = be32_to_cpu(fw_hdr->arr.len); \
12779 bp->arr = kmalloc(len, GFP_KERNEL); \
12782 func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
12783 (u8 *)bp->arr, len); \
12786 static int bnx2x_init_firmware(struct bnx2x
*bp
)
12788 const char *fw_file_name
;
12789 struct bnx2x_fw_file_hdr
*fw_hdr
;
12795 if (CHIP_IS_E1(bp
))
12796 fw_file_name
= FW_FILE_NAME_E1
;
12797 else if (CHIP_IS_E1H(bp
))
12798 fw_file_name
= FW_FILE_NAME_E1H
;
12799 else if (!CHIP_IS_E1x(bp
))
12800 fw_file_name
= FW_FILE_NAME_E2
;
12802 BNX2X_ERR("Unsupported chip revision\n");
12805 BNX2X_DEV_INFO("Loading %s\n", fw_file_name
);
12807 rc
= request_firmware(&bp
->firmware
, fw_file_name
, &bp
->pdev
->dev
);
12809 BNX2X_ERR("Can't load firmware file %s\n",
12811 goto request_firmware_exit
;
12814 rc
= bnx2x_check_firmware(bp
);
12816 BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name
);
12817 goto request_firmware_exit
;
12820 fw_hdr
= (struct bnx2x_fw_file_hdr
*)bp
->firmware
->data
;
12822 /* Initialize the pointers to the init arrays */
12824 BNX2X_ALLOC_AND_SET(init_data
, request_firmware_exit
, be32_to_cpu_n
);
12827 BNX2X_ALLOC_AND_SET(init_ops
, init_ops_alloc_err
, bnx2x_prep_ops
);
12830 BNX2X_ALLOC_AND_SET(init_ops_offsets
, init_offsets_alloc_err
,
12833 /* STORMs firmware */
12834 INIT_TSEM_INT_TABLE_DATA(bp
) = bp
->firmware
->data
+
12835 be32_to_cpu(fw_hdr
->tsem_int_table_data
.offset
);
12836 INIT_TSEM_PRAM_DATA(bp
) = bp
->firmware
->data
+
12837 be32_to_cpu(fw_hdr
->tsem_pram_data
.offset
);
12838 INIT_USEM_INT_TABLE_DATA(bp
) = bp
->firmware
->data
+
12839 be32_to_cpu(fw_hdr
->usem_int_table_data
.offset
);
12840 INIT_USEM_PRAM_DATA(bp
) = bp
->firmware
->data
+
12841 be32_to_cpu(fw_hdr
->usem_pram_data
.offset
);
12842 INIT_XSEM_INT_TABLE_DATA(bp
) = bp
->firmware
->data
+
12843 be32_to_cpu(fw_hdr
->xsem_int_table_data
.offset
);
12844 INIT_XSEM_PRAM_DATA(bp
) = bp
->firmware
->data
+
12845 be32_to_cpu(fw_hdr
->xsem_pram_data
.offset
);
12846 INIT_CSEM_INT_TABLE_DATA(bp
) = bp
->firmware
->data
+
12847 be32_to_cpu(fw_hdr
->csem_int_table_data
.offset
);
12848 INIT_CSEM_PRAM_DATA(bp
) = bp
->firmware
->data
+
12849 be32_to_cpu(fw_hdr
->csem_pram_data
.offset
);
12851 BNX2X_ALLOC_AND_SET(iro_arr
, iro_alloc_err
, bnx2x_prep_iro
);
12856 kfree(bp
->init_ops_offsets
);
12857 init_offsets_alloc_err
:
12858 kfree(bp
->init_ops
);
12859 init_ops_alloc_err
:
12860 kfree(bp
->init_data
);
12861 request_firmware_exit
:
12862 release_firmware(bp
->firmware
);
12863 bp
->firmware
= NULL
;
12868 static void bnx2x_release_firmware(struct bnx2x
*bp
)
12870 kfree(bp
->init_ops_offsets
);
12871 kfree(bp
->init_ops
);
12872 kfree(bp
->init_data
);
12873 release_firmware(bp
->firmware
);
12874 bp
->firmware
= NULL
;
12877 static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv
= {
12878 .init_hw_cmn_chip
= bnx2x_init_hw_common_chip
,
12879 .init_hw_cmn
= bnx2x_init_hw_common
,
12880 .init_hw_port
= bnx2x_init_hw_port
,
12881 .init_hw_func
= bnx2x_init_hw_func
,
12883 .reset_hw_cmn
= bnx2x_reset_common
,
12884 .reset_hw_port
= bnx2x_reset_port
,
12885 .reset_hw_func
= bnx2x_reset_func
,
12887 .gunzip_init
= bnx2x_gunzip_init
,
12888 .gunzip_end
= bnx2x_gunzip_end
,
12890 .init_fw
= bnx2x_init_firmware
,
12891 .release_fw
= bnx2x_release_firmware
,
12894 void bnx2x__init_func_obj(struct bnx2x
*bp
)
12896 /* Prepare DMAE related driver resources */
12897 bnx2x_setup_dmae(bp
);
12899 bnx2x_init_func_obj(bp
, &bp
->func_obj
,
12900 bnx2x_sp(bp
, func_rdata
),
12901 bnx2x_sp_mapping(bp
, func_rdata
),
12902 bnx2x_sp(bp
, func_afex_rdata
),
12903 bnx2x_sp_mapping(bp
, func_afex_rdata
),
12904 &bnx2x_func_sp_drv
);
12907 /* must be called after sriov-enable */
12908 static int bnx2x_set_qm_cid_count(struct bnx2x
*bp
)
12910 int cid_count
= BNX2X_L2_MAX_CID(bp
);
12913 cid_count
+= BNX2X_VF_CIDS
;
12915 if (CNIC_SUPPORT(bp
))
12916 cid_count
+= CNIC_CID_MAX
;
12918 return roundup(cid_count
, QM_CID_ROUND
);
12922 * bnx2x_get_num_none_def_sbs - return the number of none default SBs
12927 static int bnx2x_get_num_non_def_sbs(struct pci_dev
*pdev
, int cnic_cnt
)
12933 * If MSI-X is not supported - return number of SBs needed to support
12934 * one fast path queue: one FP queue + SB for CNIC
12936 if (!pdev
->msix_cap
) {
12937 dev_info(&pdev
->dev
, "no msix capability found\n");
12938 return 1 + cnic_cnt
;
12940 dev_info(&pdev
->dev
, "msix capability found\n");
12943 * The value in the PCI configuration space is the index of the last
12944 * entry, namely one less than the actual size of the table, which is
12945 * exactly what we want to return from this function: number of all SBs
12946 * without the default SB.
12947 * For VFs there is no default SB, then we return (index+1).
12949 pci_read_config_word(pdev
, pdev
->msix_cap
+ PCI_MSIX_FLAGS
, &control
);
12951 index
= control
& PCI_MSIX_FLAGS_QSIZE
;
12956 static int set_max_cos_est(int chip_id
)
12962 return BNX2X_MULTI_TX_COS_E1X
;
12965 return BNX2X_MULTI_TX_COS_E2_E3A0
;
12970 case BCM57840_4_10
:
12971 case BCM57840_2_20
:
12977 return BNX2X_MULTI_TX_COS_E3B0
;
12985 pr_err("Unknown board_type (%d), aborting\n", chip_id
);
12990 static int set_is_vf(int chip_id
)
13004 static int bnx2x_init_one(struct pci_dev
*pdev
,
13005 const struct pci_device_id
*ent
)
13007 struct net_device
*dev
= NULL
;
13009 enum pcie_link_width pcie_width
;
13010 enum pci_bus_speed pcie_speed
;
13011 int rc
, max_non_def_sbs
;
13012 int rx_count
, tx_count
, rss_count
, doorbell_size
;
13017 /* An estimated maximum supported CoS number according to the chip
13019 * We will try to roughly estimate the maximum number of CoSes this chip
13020 * may support in order to minimize the memory allocated for Tx
13021 * netdev_queue's. This number will be accurately calculated during the
13022 * initialization of bp->max_cos based on the chip versions AND chip
13023 * revision in the bnx2x_init_bp().
13025 max_cos_est
= set_max_cos_est(ent
->driver_data
);
13026 if (max_cos_est
< 0)
13027 return max_cos_est
;
13028 is_vf
= set_is_vf(ent
->driver_data
);
13029 cnic_cnt
= is_vf
? 0 : 1;
13031 max_non_def_sbs
= bnx2x_get_num_non_def_sbs(pdev
, cnic_cnt
);
13033 /* add another SB for VF as it has no default SB */
13034 max_non_def_sbs
+= is_vf
? 1 : 0;
13036 /* Maximum number of RSS queues: one IGU SB goes to CNIC */
13037 rss_count
= max_non_def_sbs
- cnic_cnt
;
13042 /* Maximum number of netdev Rx queues: RSS + FCoE L2 */
13043 rx_count
= rss_count
+ cnic_cnt
;
13045 /* Maximum number of netdev Tx queues:
13046 * Maximum TSS queues * Maximum supported number of CoS + FCoE L2
13048 tx_count
= rss_count
* max_cos_est
+ cnic_cnt
;
13050 /* dev zeroed in init_etherdev */
13051 dev
= alloc_etherdev_mqs(sizeof(*bp
), tx_count
, rx_count
);
13055 bp
= netdev_priv(dev
);
13059 bp
->flags
|= IS_VF_FLAG
;
13061 bp
->igu_sb_cnt
= max_non_def_sbs
;
13062 bp
->igu_base_addr
= IS_VF(bp
) ? PXP_VF_ADDR_IGU_START
: BAR_IGU_INTMEM
;
13063 bp
->msg_enable
= debug
;
13064 bp
->cnic_support
= cnic_cnt
;
13065 bp
->cnic_probe
= bnx2x_cnic_probe
;
13067 pci_set_drvdata(pdev
, dev
);
13069 rc
= bnx2x_init_dev(bp
, pdev
, dev
, ent
->driver_data
);
13075 BNX2X_DEV_INFO("This is a %s function\n",
13076 IS_PF(bp
) ? "physical" : "virtual");
13077 BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp
) ? "on" : "off");
13078 BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs
);
13079 BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n",
13080 tx_count
, rx_count
);
13082 rc
= bnx2x_init_bp(bp
);
13084 goto init_one_exit
;
13086 /* Map doorbells here as we need the real value of bp->max_cos which
13087 * is initialized in bnx2x_init_bp() to determine the number of
13091 bp
->doorbells
= bnx2x_vf_doorbells(bp
);
13092 rc
= bnx2x_vf_pci_alloc(bp
);
13094 goto init_one_exit
;
13096 doorbell_size
= BNX2X_L2_MAX_CID(bp
) * (1 << BNX2X_DB_SHIFT
);
13097 if (doorbell_size
> pci_resource_len(pdev
, 2)) {
13098 dev_err(&bp
->pdev
->dev
,
13099 "Cannot map doorbells, bar size too small, aborting\n");
13101 goto init_one_exit
;
13103 bp
->doorbells
= ioremap_nocache(pci_resource_start(pdev
, 2),
13106 if (!bp
->doorbells
) {
13107 dev_err(&bp
->pdev
->dev
,
13108 "Cannot map doorbell space, aborting\n");
13110 goto init_one_exit
;
13114 rc
= bnx2x_vfpf_acquire(bp
, tx_count
, rx_count
);
13116 goto init_one_exit
;
13119 /* Enable SRIOV if capability found in configuration space */
13120 rc
= bnx2x_iov_init_one(bp
, int_mode
, BNX2X_MAX_NUM_OF_VFS
);
13122 goto init_one_exit
;
13124 /* calc qm_cid_count */
13125 bp
->qm_cid_count
= bnx2x_set_qm_cid_count(bp
);
13126 BNX2X_DEV_INFO("qm_cid_count %d\n", bp
->qm_cid_count
);
13128 /* disable FCOE L2 queue for E1x*/
13129 if (CHIP_IS_E1x(bp
))
13130 bp
->flags
|= NO_FCOE_FLAG
;
13132 /* Set bp->num_queues for MSI-X mode*/
13133 bnx2x_set_num_queues(bp
);
13135 /* Configure interrupt mode: try to enable MSI-X/MSI if
13138 rc
= bnx2x_set_int_mode(bp
);
13140 dev_err(&pdev
->dev
, "Cannot set interrupts\n");
13141 goto init_one_exit
;
13143 BNX2X_DEV_INFO("set interrupts successfully\n");
13145 /* register the net device */
13146 rc
= register_netdev(dev
);
13148 dev_err(&pdev
->dev
, "Cannot register net device\n");
13149 goto init_one_exit
;
13151 BNX2X_DEV_INFO("device name after netdev register %s\n", dev
->name
);
13153 if (!NO_FCOE(bp
)) {
13154 /* Add storage MAC address */
13156 dev_addr_add(bp
->dev
, bp
->fip_mac
, NETDEV_HW_ADDR_T_SAN
);
13159 if (pcie_get_minimum_link(bp
->pdev
, &pcie_speed
, &pcie_width
) ||
13160 pcie_speed
== PCI_SPEED_UNKNOWN
||
13161 pcie_width
== PCIE_LNK_WIDTH_UNKNOWN
)
13162 BNX2X_DEV_INFO("Failed to determine PCI Express Bandwidth\n");
13165 "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
13166 board_info
[ent
->driver_data
].name
,
13167 (CHIP_REV(bp
) >> 12) + 'A', (CHIP_METAL(bp
) >> 4),
13169 pcie_speed
== PCIE_SPEED_2_5GT
? "2.5GHz" :
13170 pcie_speed
== PCIE_SPEED_5_0GT
? "5.0GHz" :
13171 pcie_speed
== PCIE_SPEED_8_0GT
? "8.0GHz" :
13173 dev
->base_addr
, bp
->pdev
->irq
, dev
->dev_addr
);
13178 bnx2x_disable_pcie_error_reporting(bp
);
13181 iounmap(bp
->regview
);
13183 if (IS_PF(bp
) && bp
->doorbells
)
13184 iounmap(bp
->doorbells
);
13188 if (atomic_read(&pdev
->enable_cnt
) == 1)
13189 pci_release_regions(pdev
);
13191 pci_disable_device(pdev
);
13196 static void __bnx2x_remove(struct pci_dev
*pdev
,
13197 struct net_device
*dev
,
13199 bool remove_netdev
)
13201 /* Delete storage MAC address */
13202 if (!NO_FCOE(bp
)) {
13204 dev_addr_del(bp
->dev
, bp
->fip_mac
, NETDEV_HW_ADDR_T_SAN
);
13209 /* Delete app tlvs from dcbnl */
13210 bnx2x_dcbnl_update_applist(bp
, true);
13215 (bp
->flags
& BC_SUPPORTS_RMMOD_CMD
))
13216 bnx2x_fw_command(bp
, DRV_MSG_CODE_RMMOD
, 0);
13218 /* Close the interface - either directly or implicitly */
13219 if (remove_netdev
) {
13220 unregister_netdev(dev
);
13227 bnx2x_iov_remove_one(bp
);
13229 /* Power on: we can't let PCI layer write to us while we are in D3 */
13231 bnx2x_set_power_state(bp
, PCI_D0
);
13233 /* Disable MSI/MSI-X */
13234 bnx2x_disable_msi(bp
);
13238 bnx2x_set_power_state(bp
, PCI_D3hot
);
13240 /* Make sure RESET task is not scheduled before continuing */
13241 cancel_delayed_work_sync(&bp
->sp_rtnl_task
);
13243 /* send message via vfpf channel to release the resources of this vf */
13245 bnx2x_vfpf_release(bp
);
13247 /* Assumes no further PCIe PM changes will occur */
13248 if (system_state
== SYSTEM_POWER_OFF
) {
13249 pci_wake_from_d3(pdev
, bp
->wol
);
13250 pci_set_power_state(pdev
, PCI_D3hot
);
13253 bnx2x_disable_pcie_error_reporting(bp
);
13254 if (remove_netdev
) {
13256 iounmap(bp
->regview
);
13258 /* For vfs, doorbells are part of the regview and were unmapped
13259 * along with it. FW is only loaded by PF.
13263 iounmap(bp
->doorbells
);
13265 bnx2x_release_firmware(bp
);
13267 bnx2x_vf_pci_dealloc(bp
);
13269 bnx2x_free_mem_bp(bp
);
13273 if (atomic_read(&pdev
->enable_cnt
) == 1)
13274 pci_release_regions(pdev
);
13276 pci_disable_device(pdev
);
13280 static void bnx2x_remove_one(struct pci_dev
*pdev
)
13282 struct net_device
*dev
= pci_get_drvdata(pdev
);
13286 dev_err(&pdev
->dev
, "BAD net device from bnx2x_init_one\n");
13289 bp
= netdev_priv(dev
);
13291 __bnx2x_remove(pdev
, dev
, bp
, true);
13294 static int bnx2x_eeh_nic_unload(struct bnx2x
*bp
)
13296 bp
->state
= BNX2X_STATE_CLOSING_WAIT4_HALT
;
13298 bp
->rx_mode
= BNX2X_RX_MODE_NONE
;
13300 if (CNIC_LOADED(bp
))
13301 bnx2x_cnic_notify(bp
, CNIC_CTL_STOP_CMD
);
13304 bnx2x_tx_disable(bp
);
13305 /* Delete all NAPI objects */
13306 bnx2x_del_all_napi(bp
);
13307 if (CNIC_LOADED(bp
))
13308 bnx2x_del_all_napi_cnic(bp
);
13309 netdev_reset_tc(bp
->dev
);
13311 del_timer_sync(&bp
->timer
);
13312 cancel_delayed_work_sync(&bp
->sp_task
);
13313 cancel_delayed_work_sync(&bp
->period_task
);
13315 spin_lock_bh(&bp
->stats_lock
);
13316 bp
->stats_state
= STATS_STATE_DISABLED
;
13317 spin_unlock_bh(&bp
->stats_lock
);
13319 bnx2x_save_statistics(bp
);
13321 netif_carrier_off(bp
->dev
);
13327 * bnx2x_io_error_detected - called when PCI error is detected
13328 * @pdev: Pointer to PCI device
13329 * @state: The current pci connection state
13331 * This function is called after a PCI bus error affecting
13332 * this device has been detected.
13334 static pci_ers_result_t
bnx2x_io_error_detected(struct pci_dev
*pdev
,
13335 pci_channel_state_t state
)
13337 struct net_device
*dev
= pci_get_drvdata(pdev
);
13338 struct bnx2x
*bp
= netdev_priv(dev
);
13342 BNX2X_ERR("IO error detected\n");
13344 netif_device_detach(dev
);
13346 if (state
== pci_channel_io_perm_failure
) {
13348 return PCI_ERS_RESULT_DISCONNECT
;
13351 if (netif_running(dev
))
13352 bnx2x_eeh_nic_unload(bp
);
13354 bnx2x_prev_path_mark_eeh(bp
);
13356 pci_disable_device(pdev
);
13360 /* Request a slot reset */
13361 return PCI_ERS_RESULT_NEED_RESET
;
13365 * bnx2x_io_slot_reset - called after the PCI bus has been reset
13366 * @pdev: Pointer to PCI device
13368 * Restart the card from scratch, as if from a cold-boot.
13370 static pci_ers_result_t
bnx2x_io_slot_reset(struct pci_dev
*pdev
)
13372 struct net_device
*dev
= pci_get_drvdata(pdev
);
13373 struct bnx2x
*bp
= netdev_priv(dev
);
13377 BNX2X_ERR("IO slot reset initializing...\n");
13378 if (pci_enable_device(pdev
)) {
13379 dev_err(&pdev
->dev
,
13380 "Cannot re-enable PCI device after reset\n");
13382 return PCI_ERS_RESULT_DISCONNECT
;
13385 pci_set_master(pdev
);
13386 pci_restore_state(pdev
);
13387 pci_save_state(pdev
);
13389 if (netif_running(dev
))
13390 bnx2x_set_power_state(bp
, PCI_D0
);
13392 if (netif_running(dev
)) {
13393 BNX2X_ERR("IO slot reset --> driver unload\n");
13395 /* MCP should have been reset; Need to wait for validity */
13396 bnx2x_init_shmem(bp
);
13398 if (IS_PF(bp
) && SHMEM2_HAS(bp
, drv_capabilities_flag
)) {
13402 drv_capabilities_flag
[BP_FW_MB_IDX(bp
)]);
13403 SHMEM2_WR(bp
, drv_capabilities_flag
[BP_FW_MB_IDX(bp
)],
13404 v
& ~DRV_FLAGS_CAPABILITIES_LOADED_L2
);
13406 bnx2x_drain_tx_queues(bp
);
13407 bnx2x_send_unload_req(bp
, UNLOAD_RECOVERY
);
13408 bnx2x_netif_stop(bp
, 1);
13409 bnx2x_free_irq(bp
);
13411 /* Report UNLOAD_DONE to MCP */
13412 bnx2x_send_unload_done(bp
, true);
13417 bnx2x_prev_unload(bp
);
13419 /* We should have reseted the engine, so It's fair to
13420 * assume the FW will no longer write to the bnx2x driver.
13422 bnx2x_squeeze_objects(bp
);
13423 bnx2x_free_skbs(bp
);
13424 for_each_rx_queue(bp
, i
)
13425 bnx2x_free_rx_sge_range(bp
, bp
->fp
+ i
, NUM_RX_SGE
);
13426 bnx2x_free_fp_mem(bp
);
13427 bnx2x_free_mem(bp
);
13429 bp
->state
= BNX2X_STATE_CLOSED
;
13434 /* If AER, perform cleanup of the PCIe registers */
13435 if (bp
->flags
& AER_ENABLED
) {
13436 if (pci_cleanup_aer_uncorrect_error_status(pdev
))
13437 BNX2X_ERR("pci_cleanup_aer_uncorrect_error_status failed\n");
13439 DP(NETIF_MSG_HW
, "pci_cleanup_aer_uncorrect_error_status succeeded\n");
13442 return PCI_ERS_RESULT_RECOVERED
;
13446 * bnx2x_io_resume - called when traffic can start flowing again
13447 * @pdev: Pointer to PCI device
13449 * This callback is called when the error recovery driver tells us that
13450 * its OK to resume normal operation.
13452 static void bnx2x_io_resume(struct pci_dev
*pdev
)
13454 struct net_device
*dev
= pci_get_drvdata(pdev
);
13455 struct bnx2x
*bp
= netdev_priv(dev
);
13457 if (bp
->recovery_state
!= BNX2X_RECOVERY_DONE
) {
13458 netdev_err(bp
->dev
, "Handling parity error recovery. Try again later\n");
13464 bp
->fw_seq
= SHMEM_RD(bp
, func_mb
[BP_FW_MB_IDX(bp
)].drv_mb_header
) &
13465 DRV_MSG_SEQ_NUMBER_MASK
;
13467 if (netif_running(dev
))
13468 bnx2x_nic_load(bp
, LOAD_NORMAL
);
13470 netif_device_attach(dev
);
13475 static const struct pci_error_handlers bnx2x_err_handler
= {
13476 .error_detected
= bnx2x_io_error_detected
,
13477 .slot_reset
= bnx2x_io_slot_reset
,
13478 .resume
= bnx2x_io_resume
,
13481 static void bnx2x_shutdown(struct pci_dev
*pdev
)
13483 struct net_device
*dev
= pci_get_drvdata(pdev
);
13489 bp
= netdev_priv(dev
);
13494 netif_device_detach(dev
);
13497 /* Don't remove the netdevice, as there are scenarios which will cause
13498 * the kernel to hang, e.g., when trying to remove bnx2i while the
13499 * rootfs is mounted from SAN.
13501 __bnx2x_remove(pdev
, dev
, bp
, false);
13504 static struct pci_driver bnx2x_pci_driver
= {
13505 .name
= DRV_MODULE_NAME
,
13506 .id_table
= bnx2x_pci_tbl
,
13507 .probe
= bnx2x_init_one
,
13508 .remove
= bnx2x_remove_one
,
13509 .suspend
= bnx2x_suspend
,
13510 .resume
= bnx2x_resume
,
13511 .err_handler
= &bnx2x_err_handler
,
13512 #ifdef CONFIG_BNX2X_SRIOV
13513 .sriov_configure
= bnx2x_sriov_configure
,
13515 .shutdown
= bnx2x_shutdown
,
13518 static int __init
bnx2x_init(void)
13522 pr_info("%s", version
);
13524 bnx2x_wq
= create_singlethread_workqueue("bnx2x");
13525 if (bnx2x_wq
== NULL
) {
13526 pr_err("Cannot create workqueue\n");
13529 bnx2x_iov_wq
= create_singlethread_workqueue("bnx2x_iov");
13530 if (!bnx2x_iov_wq
) {
13531 pr_err("Cannot create iov workqueue\n");
13532 destroy_workqueue(bnx2x_wq
);
13536 ret
= pci_register_driver(&bnx2x_pci_driver
);
13538 pr_err("Cannot register driver\n");
13539 destroy_workqueue(bnx2x_wq
);
13540 destroy_workqueue(bnx2x_iov_wq
);
13545 static void __exit
bnx2x_cleanup(void)
13547 struct list_head
*pos
, *q
;
13549 pci_unregister_driver(&bnx2x_pci_driver
);
13551 destroy_workqueue(bnx2x_wq
);
13552 destroy_workqueue(bnx2x_iov_wq
);
13554 /* Free globally allocated resources */
13555 list_for_each_safe(pos
, q
, &bnx2x_prev_list
) {
13556 struct bnx2x_prev_path_list
*tmp
=
13557 list_entry(pos
, struct bnx2x_prev_path_list
, list
);
13563 void bnx2x_notify_link_changed(struct bnx2x
*bp
)
13565 REG_WR(bp
, MISC_REG_AEU_GENERAL_ATTN_12
+ BP_FUNC(bp
)*sizeof(u32
), 1);
13568 module_init(bnx2x_init
);
13569 module_exit(bnx2x_cleanup
);
13572 * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s).
13574 * @bp: driver handle
13575 * @set: set or clear the CAM entry
13577 * This function will wait until the ramrod completion returns.
13578 * Return 0 if success, -ENODEV if ramrod doesn't return.
13580 static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x
*bp
)
13582 unsigned long ramrod_flags
= 0;
13584 __set_bit(RAMROD_COMP_WAIT
, &ramrod_flags
);
13585 return bnx2x_set_mac_one(bp
, bp
->cnic_eth_dev
.iscsi_mac
,
13586 &bp
->iscsi_l2_mac_obj
, true,
13587 BNX2X_ISCSI_ETH_MAC
, &ramrod_flags
);
13590 /* count denotes the number of new completions we have seen */
13591 static void bnx2x_cnic_sp_post(struct bnx2x
*bp
, int count
)
13593 struct eth_spe
*spe
;
13594 int cxt_index
, cxt_offset
;
13596 #ifdef BNX2X_STOP_ON_ERROR
13597 if (unlikely(bp
->panic
))
13601 spin_lock_bh(&bp
->spq_lock
);
13602 BUG_ON(bp
->cnic_spq_pending
< count
);
13603 bp
->cnic_spq_pending
-= count
;
13605 for (; bp
->cnic_kwq_pending
; bp
->cnic_kwq_pending
--) {
13606 u16 type
= (le16_to_cpu(bp
->cnic_kwq_cons
->hdr
.type
)
13607 & SPE_HDR_CONN_TYPE
) >>
13608 SPE_HDR_CONN_TYPE_SHIFT
;
13609 u8 cmd
= (le32_to_cpu(bp
->cnic_kwq_cons
->hdr
.conn_and_cmd_data
)
13610 >> SPE_HDR_CMD_ID_SHIFT
) & 0xff;
13612 /* Set validation for iSCSI L2 client before sending SETUP
13615 if (type
== ETH_CONNECTION_TYPE
) {
13616 if (cmd
== RAMROD_CMD_ID_ETH_CLIENT_SETUP
) {
13617 cxt_index
= BNX2X_ISCSI_ETH_CID(bp
) /
13619 cxt_offset
= BNX2X_ISCSI_ETH_CID(bp
) -
13620 (cxt_index
* ILT_PAGE_CIDS
);
13621 bnx2x_set_ctx_validation(bp
,
13622 &bp
->context
[cxt_index
].
13623 vcxt
[cxt_offset
].eth
,
13624 BNX2X_ISCSI_ETH_CID(bp
));
13629 * There may be not more than 8 L2, not more than 8 L5 SPEs
13630 * and in the air. We also check that number of outstanding
13631 * COMMON ramrods is not more than the EQ and SPQ can
13634 if (type
== ETH_CONNECTION_TYPE
) {
13635 if (!atomic_read(&bp
->cq_spq_left
))
13638 atomic_dec(&bp
->cq_spq_left
);
13639 } else if (type
== NONE_CONNECTION_TYPE
) {
13640 if (!atomic_read(&bp
->eq_spq_left
))
13643 atomic_dec(&bp
->eq_spq_left
);
13644 } else if ((type
== ISCSI_CONNECTION_TYPE
) ||
13645 (type
== FCOE_CONNECTION_TYPE
)) {
13646 if (bp
->cnic_spq_pending
>=
13647 bp
->cnic_eth_dev
.max_kwqe_pending
)
13650 bp
->cnic_spq_pending
++;
13652 BNX2X_ERR("Unknown SPE type: %d\n", type
);
13657 spe
= bnx2x_sp_get_next(bp
);
13658 *spe
= *bp
->cnic_kwq_cons
;
13660 DP(BNX2X_MSG_SP
, "pending on SPQ %d, on KWQ %d count %d\n",
13661 bp
->cnic_spq_pending
, bp
->cnic_kwq_pending
, count
);
13663 if (bp
->cnic_kwq_cons
== bp
->cnic_kwq_last
)
13664 bp
->cnic_kwq_cons
= bp
->cnic_kwq
;
13666 bp
->cnic_kwq_cons
++;
13668 bnx2x_sp_prod_update(bp
);
13669 spin_unlock_bh(&bp
->spq_lock
);
13672 static int bnx2x_cnic_sp_queue(struct net_device
*dev
,
13673 struct kwqe_16
*kwqes
[], u32 count
)
13675 struct bnx2x
*bp
= netdev_priv(dev
);
13678 #ifdef BNX2X_STOP_ON_ERROR
13679 if (unlikely(bp
->panic
)) {
13680 BNX2X_ERR("Can't post to SP queue while panic\n");
13685 if ((bp
->recovery_state
!= BNX2X_RECOVERY_DONE
) &&
13686 (bp
->recovery_state
!= BNX2X_RECOVERY_NIC_LOADING
)) {
13687 BNX2X_ERR("Handling parity error recovery. Try again later\n");
13691 spin_lock_bh(&bp
->spq_lock
);
13693 for (i
= 0; i
< count
; i
++) {
13694 struct eth_spe
*spe
= (struct eth_spe
*)kwqes
[i
];
13696 if (bp
->cnic_kwq_pending
== MAX_SP_DESC_CNT
)
13699 *bp
->cnic_kwq_prod
= *spe
;
13701 bp
->cnic_kwq_pending
++;
13703 DP(BNX2X_MSG_SP
, "L5 SPQE %x %x %x:%x pos %d\n",
13704 spe
->hdr
.conn_and_cmd_data
, spe
->hdr
.type
,
13705 spe
->data
.update_data_addr
.hi
,
13706 spe
->data
.update_data_addr
.lo
,
13707 bp
->cnic_kwq_pending
);
13709 if (bp
->cnic_kwq_prod
== bp
->cnic_kwq_last
)
13710 bp
->cnic_kwq_prod
= bp
->cnic_kwq
;
13712 bp
->cnic_kwq_prod
++;
13715 spin_unlock_bh(&bp
->spq_lock
);
13717 if (bp
->cnic_spq_pending
< bp
->cnic_eth_dev
.max_kwqe_pending
)
13718 bnx2x_cnic_sp_post(bp
, 0);
13723 static int bnx2x_cnic_ctl_send(struct bnx2x
*bp
, struct cnic_ctl_info
*ctl
)
13725 struct cnic_ops
*c_ops
;
13728 mutex_lock(&bp
->cnic_mutex
);
13729 c_ops
= rcu_dereference_protected(bp
->cnic_ops
,
13730 lockdep_is_held(&bp
->cnic_mutex
));
13732 rc
= c_ops
->cnic_ctl(bp
->cnic_data
, ctl
);
13733 mutex_unlock(&bp
->cnic_mutex
);
13738 static int bnx2x_cnic_ctl_send_bh(struct bnx2x
*bp
, struct cnic_ctl_info
*ctl
)
13740 struct cnic_ops
*c_ops
;
13744 c_ops
= rcu_dereference(bp
->cnic_ops
);
13746 rc
= c_ops
->cnic_ctl(bp
->cnic_data
, ctl
);
13753 * for commands that have no data
13755 int bnx2x_cnic_notify(struct bnx2x
*bp
, int cmd
)
13757 struct cnic_ctl_info ctl
= {0};
13761 return bnx2x_cnic_ctl_send(bp
, &ctl
);
13764 static void bnx2x_cnic_cfc_comp(struct bnx2x
*bp
, int cid
, u8 err
)
13766 struct cnic_ctl_info ctl
= {0};
13768 /* first we tell CNIC and only then we count this as a completion */
13769 ctl
.cmd
= CNIC_CTL_COMPLETION_CMD
;
13770 ctl
.data
.comp
.cid
= cid
;
13771 ctl
.data
.comp
.error
= err
;
13773 bnx2x_cnic_ctl_send_bh(bp
, &ctl
);
13774 bnx2x_cnic_sp_post(bp
, 0);
13777 /* Called with netif_addr_lock_bh() taken.
13778 * Sets an rx_mode config for an iSCSI ETH client.
13780 * Completion should be checked outside.
13782 static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x
*bp
, bool start
)
13784 unsigned long accept_flags
= 0, ramrod_flags
= 0;
13785 u8 cl_id
= bnx2x_cnic_eth_cl_id(bp
, BNX2X_ISCSI_ETH_CL_ID_IDX
);
13786 int sched_state
= BNX2X_FILTER_ISCSI_ETH_STOP_SCHED
;
13789 /* Start accepting on iSCSI L2 ring. Accept all multicasts
13790 * because it's the only way for UIO Queue to accept
13791 * multicasts (in non-promiscuous mode only one Queue per
13792 * function will receive multicast packets (leading in our
13795 __set_bit(BNX2X_ACCEPT_UNICAST
, &accept_flags
);
13796 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST
, &accept_flags
);
13797 __set_bit(BNX2X_ACCEPT_BROADCAST
, &accept_flags
);
13798 __set_bit(BNX2X_ACCEPT_ANY_VLAN
, &accept_flags
);
13800 /* Clear STOP_PENDING bit if START is requested */
13801 clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED
, &bp
->sp_state
);
13803 sched_state
= BNX2X_FILTER_ISCSI_ETH_START_SCHED
;
13805 /* Clear START_PENDING bit if STOP is requested */
13806 clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED
, &bp
->sp_state
);
13808 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING
, &bp
->sp_state
))
13809 set_bit(sched_state
, &bp
->sp_state
);
13811 __set_bit(RAMROD_RX
, &ramrod_flags
);
13812 bnx2x_set_q_rx_mode(bp
, cl_id
, 0, accept_flags
, 0,
13817 static int bnx2x_drv_ctl(struct net_device
*dev
, struct drv_ctl_info
*ctl
)
13819 struct bnx2x
*bp
= netdev_priv(dev
);
13822 switch (ctl
->cmd
) {
13823 case DRV_CTL_CTXTBL_WR_CMD
: {
13824 u32 index
= ctl
->data
.io
.offset
;
13825 dma_addr_t addr
= ctl
->data
.io
.dma_addr
;
13827 bnx2x_ilt_wr(bp
, index
, addr
);
13831 case DRV_CTL_RET_L5_SPQ_CREDIT_CMD
: {
13832 int count
= ctl
->data
.credit
.credit_count
;
13834 bnx2x_cnic_sp_post(bp
, count
);
13838 /* rtnl_lock is held. */
13839 case DRV_CTL_START_L2_CMD
: {
13840 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
13841 unsigned long sp_bits
= 0;
13843 /* Configure the iSCSI classification object */
13844 bnx2x_init_mac_obj(bp
, &bp
->iscsi_l2_mac_obj
,
13845 cp
->iscsi_l2_client_id
,
13846 cp
->iscsi_l2_cid
, BP_FUNC(bp
),
13847 bnx2x_sp(bp
, mac_rdata
),
13848 bnx2x_sp_mapping(bp
, mac_rdata
),
13849 BNX2X_FILTER_MAC_PENDING
,
13850 &bp
->sp_state
, BNX2X_OBJ_TYPE_RX
,
13853 /* Set iSCSI MAC address */
13854 rc
= bnx2x_set_iscsi_eth_mac_addr(bp
);
13861 /* Start accepting on iSCSI L2 ring */
13863 netif_addr_lock_bh(dev
);
13864 bnx2x_set_iscsi_eth_rx_mode(bp
, true);
13865 netif_addr_unlock_bh(dev
);
13867 /* bits to wait on */
13868 __set_bit(BNX2X_FILTER_RX_MODE_PENDING
, &sp_bits
);
13869 __set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED
, &sp_bits
);
13871 if (!bnx2x_wait_sp_comp(bp
, sp_bits
))
13872 BNX2X_ERR("rx_mode completion timed out!\n");
13877 /* rtnl_lock is held. */
13878 case DRV_CTL_STOP_L2_CMD
: {
13879 unsigned long sp_bits
= 0;
13881 /* Stop accepting on iSCSI L2 ring */
13882 netif_addr_lock_bh(dev
);
13883 bnx2x_set_iscsi_eth_rx_mode(bp
, false);
13884 netif_addr_unlock_bh(dev
);
13886 /* bits to wait on */
13887 __set_bit(BNX2X_FILTER_RX_MODE_PENDING
, &sp_bits
);
13888 __set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED
, &sp_bits
);
13890 if (!bnx2x_wait_sp_comp(bp
, sp_bits
))
13891 BNX2X_ERR("rx_mode completion timed out!\n");
13896 /* Unset iSCSI L2 MAC */
13897 rc
= bnx2x_del_all_macs(bp
, &bp
->iscsi_l2_mac_obj
,
13898 BNX2X_ISCSI_ETH_MAC
, true);
13901 case DRV_CTL_RET_L2_SPQ_CREDIT_CMD
: {
13902 int count
= ctl
->data
.credit
.credit_count
;
13904 smp_mb__before_atomic();
13905 atomic_add(count
, &bp
->cq_spq_left
);
13906 smp_mb__after_atomic();
13909 case DRV_CTL_ULP_REGISTER_CMD
: {
13910 int ulp_type
= ctl
->data
.register_data
.ulp_type
;
13912 if (CHIP_IS_E3(bp
)) {
13913 int idx
= BP_FW_MB_IDX(bp
);
13914 u32 cap
= SHMEM2_RD(bp
, drv_capabilities_flag
[idx
]);
13915 int path
= BP_PATH(bp
);
13916 int port
= BP_PORT(bp
);
13918 u32 scratch_offset
;
13921 /* first write capability to shmem2 */
13922 if (ulp_type
== CNIC_ULP_ISCSI
)
13923 cap
|= DRV_FLAGS_CAPABILITIES_LOADED_ISCSI
;
13924 else if (ulp_type
== CNIC_ULP_FCOE
)
13925 cap
|= DRV_FLAGS_CAPABILITIES_LOADED_FCOE
;
13926 SHMEM2_WR(bp
, drv_capabilities_flag
[idx
], cap
);
13928 if ((ulp_type
!= CNIC_ULP_FCOE
) ||
13929 (!SHMEM2_HAS(bp
, ncsi_oem_data_addr
)) ||
13930 (!(bp
->flags
& BC_SUPPORTS_FCOE_FEATURES
)))
13933 /* if reached here - should write fcoe capabilities */
13934 scratch_offset
= SHMEM2_RD(bp
, ncsi_oem_data_addr
);
13935 if (!scratch_offset
)
13937 scratch_offset
+= offsetof(struct glob_ncsi_oem_data
,
13938 fcoe_features
[path
][port
]);
13939 host_addr
= (u32
*) &(ctl
->data
.register_data
.
13941 for (i
= 0; i
< sizeof(struct fcoe_capabilities
);
13943 REG_WR(bp
, scratch_offset
+ i
,
13944 *(host_addr
+ i
/4));
13946 bnx2x_schedule_sp_rtnl(bp
, BNX2X_SP_RTNL_GET_DRV_VERSION
, 0);
13950 case DRV_CTL_ULP_UNREGISTER_CMD
: {
13951 int ulp_type
= ctl
->data
.ulp_type
;
13953 if (CHIP_IS_E3(bp
)) {
13954 int idx
= BP_FW_MB_IDX(bp
);
13957 cap
= SHMEM2_RD(bp
, drv_capabilities_flag
[idx
]);
13958 if (ulp_type
== CNIC_ULP_ISCSI
)
13959 cap
&= ~DRV_FLAGS_CAPABILITIES_LOADED_ISCSI
;
13960 else if (ulp_type
== CNIC_ULP_FCOE
)
13961 cap
&= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE
;
13962 SHMEM2_WR(bp
, drv_capabilities_flag
[idx
], cap
);
13964 bnx2x_schedule_sp_rtnl(bp
, BNX2X_SP_RTNL_GET_DRV_VERSION
, 0);
13969 BNX2X_ERR("unknown command %x\n", ctl
->cmd
);
13976 void bnx2x_setup_cnic_irq_info(struct bnx2x
*bp
)
13978 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
13980 if (bp
->flags
& USING_MSIX_FLAG
) {
13981 cp
->drv_state
|= CNIC_DRV_STATE_USING_MSIX
;
13982 cp
->irq_arr
[0].irq_flags
|= CNIC_IRQ_FL_MSIX
;
13983 cp
->irq_arr
[0].vector
= bp
->msix_table
[1].vector
;
13985 cp
->drv_state
&= ~CNIC_DRV_STATE_USING_MSIX
;
13986 cp
->irq_arr
[0].irq_flags
&= ~CNIC_IRQ_FL_MSIX
;
13988 if (!CHIP_IS_E1x(bp
))
13989 cp
->irq_arr
[0].status_blk
= (void *)bp
->cnic_sb
.e2_sb
;
13991 cp
->irq_arr
[0].status_blk
= (void *)bp
->cnic_sb
.e1x_sb
;
13993 cp
->irq_arr
[0].status_blk_num
= bnx2x_cnic_fw_sb_id(bp
);
13994 cp
->irq_arr
[0].status_blk_num2
= bnx2x_cnic_igu_sb_id(bp
);
13995 cp
->irq_arr
[1].status_blk
= bp
->def_status_blk
;
13996 cp
->irq_arr
[1].status_blk_num
= DEF_SB_ID
;
13997 cp
->irq_arr
[1].status_blk_num2
= DEF_SB_IGU_ID
;
14002 void bnx2x_setup_cnic_info(struct bnx2x
*bp
)
14004 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
14006 cp
->ctx_tbl_offset
= FUNC_ILT_BASE(BP_FUNC(bp
)) +
14007 bnx2x_cid_ilt_lines(bp
);
14008 cp
->starting_cid
= bnx2x_cid_ilt_lines(bp
) * ILT_PAGE_CIDS
;
14009 cp
->fcoe_init_cid
= BNX2X_FCOE_ETH_CID(bp
);
14010 cp
->iscsi_l2_cid
= BNX2X_ISCSI_ETH_CID(bp
);
14012 DP(NETIF_MSG_IFUP
, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n",
14013 BNX2X_1st_NON_L2_ETH_CID(bp
), cp
->starting_cid
, cp
->fcoe_init_cid
,
14016 if (NO_ISCSI_OOO(bp
))
14017 cp
->drv_state
|= CNIC_DRV_STATE_NO_ISCSI_OOO
;
14020 static int bnx2x_register_cnic(struct net_device
*dev
, struct cnic_ops
*ops
,
14023 struct bnx2x
*bp
= netdev_priv(dev
);
14024 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
14027 DP(NETIF_MSG_IFUP
, "Register_cnic called\n");
14030 BNX2X_ERR("NULL ops received\n");
14034 if (!CNIC_SUPPORT(bp
)) {
14035 BNX2X_ERR("Can't register CNIC when not supported\n");
14036 return -EOPNOTSUPP
;
14039 if (!CNIC_LOADED(bp
)) {
14040 rc
= bnx2x_load_cnic(bp
);
14042 BNX2X_ERR("CNIC-related load failed\n");
14047 bp
->cnic_enabled
= true;
14049 bp
->cnic_kwq
= kzalloc(PAGE_SIZE
, GFP_KERNEL
);
14053 bp
->cnic_kwq_cons
= bp
->cnic_kwq
;
14054 bp
->cnic_kwq_prod
= bp
->cnic_kwq
;
14055 bp
->cnic_kwq_last
= bp
->cnic_kwq
+ MAX_SP_DESC_CNT
;
14057 bp
->cnic_spq_pending
= 0;
14058 bp
->cnic_kwq_pending
= 0;
14060 bp
->cnic_data
= data
;
14063 cp
->drv_state
|= CNIC_DRV_STATE_REGD
;
14064 cp
->iro_arr
= bp
->iro_arr
;
14066 bnx2x_setup_cnic_irq_info(bp
);
14068 rcu_assign_pointer(bp
->cnic_ops
, ops
);
14070 /* Schedule driver to read CNIC driver versions */
14071 bnx2x_schedule_sp_rtnl(bp
, BNX2X_SP_RTNL_GET_DRV_VERSION
, 0);
14076 static int bnx2x_unregister_cnic(struct net_device
*dev
)
14078 struct bnx2x
*bp
= netdev_priv(dev
);
14079 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
14081 mutex_lock(&bp
->cnic_mutex
);
14083 RCU_INIT_POINTER(bp
->cnic_ops
, NULL
);
14084 mutex_unlock(&bp
->cnic_mutex
);
14086 bp
->cnic_enabled
= false;
14087 kfree(bp
->cnic_kwq
);
14088 bp
->cnic_kwq
= NULL
;
14093 static struct cnic_eth_dev
*bnx2x_cnic_probe(struct net_device
*dev
)
14095 struct bnx2x
*bp
= netdev_priv(dev
);
14096 struct cnic_eth_dev
*cp
= &bp
->cnic_eth_dev
;
14098 /* If both iSCSI and FCoE are disabled - return NULL in
14099 * order to indicate CNIC that it should not try to work
14100 * with this device.
14102 if (NO_ISCSI(bp
) && NO_FCOE(bp
))
14105 cp
->drv_owner
= THIS_MODULE
;
14106 cp
->chip_id
= CHIP_ID(bp
);
14107 cp
->pdev
= bp
->pdev
;
14108 cp
->io_base
= bp
->regview
;
14109 cp
->io_base2
= bp
->doorbells
;
14110 cp
->max_kwqe_pending
= 8;
14111 cp
->ctx_blk_size
= CDU_ILT_PAGE_SZ
;
14112 cp
->ctx_tbl_offset
= FUNC_ILT_BASE(BP_FUNC(bp
)) +
14113 bnx2x_cid_ilt_lines(bp
);
14114 cp
->ctx_tbl_len
= CNIC_ILT_LINES
;
14115 cp
->starting_cid
= bnx2x_cid_ilt_lines(bp
) * ILT_PAGE_CIDS
;
14116 cp
->drv_submit_kwqes_16
= bnx2x_cnic_sp_queue
;
14117 cp
->drv_ctl
= bnx2x_drv_ctl
;
14118 cp
->drv_register_cnic
= bnx2x_register_cnic
;
14119 cp
->drv_unregister_cnic
= bnx2x_unregister_cnic
;
14120 cp
->fcoe_init_cid
= BNX2X_FCOE_ETH_CID(bp
);
14121 cp
->iscsi_l2_client_id
=
14122 bnx2x_cnic_eth_cl_id(bp
, BNX2X_ISCSI_ETH_CL_ID_IDX
);
14123 cp
->iscsi_l2_cid
= BNX2X_ISCSI_ETH_CID(bp
);
14125 if (NO_ISCSI_OOO(bp
))
14126 cp
->drv_state
|= CNIC_DRV_STATE_NO_ISCSI_OOO
;
14129 cp
->drv_state
|= CNIC_DRV_STATE_NO_ISCSI
;
14132 cp
->drv_state
|= CNIC_DRV_STATE_NO_FCOE
;
14135 "page_size %d, tbl_offset %d, tbl_lines %d, starting cid %d\n",
14137 cp
->ctx_tbl_offset
,
14143 static u32
bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath
*fp
)
14145 struct bnx2x
*bp
= fp
->bp
;
14146 u32 offset
= BAR_USTRORM_INTMEM
;
14149 return bnx2x_vf_ustorm_prods_offset(bp
, fp
);
14150 else if (!CHIP_IS_E1x(bp
))
14151 offset
+= USTORM_RX_PRODS_E2_OFFSET(fp
->cl_qzone_id
);
14153 offset
+= USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp
), fp
->cl_id
);
14158 /* called only on E1H or E2.
14159 * When pretending to be PF, the pretend value is the function number 0...7
14160 * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
14163 int bnx2x_pretend_func(struct bnx2x
*bp
, u16 pretend_func_val
)
14167 if (CHIP_IS_E1H(bp
) && pretend_func_val
>= E1H_FUNC_MAX
)
14170 /* get my own pretend register */
14171 pretend_reg
= bnx2x_get_pretend_reg(bp
);
14172 REG_WR(bp
, pretend_reg
, pretend_func_val
);
14173 REG_RD(bp
, pretend_reg
);