drivers/net/ethernet/intel/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # Intel network device configuration
   4 #
   5
   6 config NET_VENDOR_INTEL
   7         bool "Intel devices"
   8         default y
   9         help
  10           If you have a network (Ethernet) card belonging to this class, say Y.
  11
  12           Note that the answer to this question doesn't directly affect the
  13           kernel: saying N will just cause the configurator to skip all
  14           the questions about Intel cards. If you say Y, you will be asked for
  15           your specific card in the following questions.
  16
  17 if NET_VENDOR_INTEL
  18
  19 config E100
  20         tristate "Intel(R) PRO/100+ support"
  21         depends on PCI
  22         select MII
  23         help
  24           This driver supports Intel(R) PRO/100 family of adapters.
  25           To verify that your adapter is supported, find the board ID number
  26           on the adapter. Look for a label that has a barcode and a number
  27           in the format 123456-001 (six digits hyphen three digits).
  28
  29           Use the above information and the Adapter & Driver ID Guide that
  30           can be located at:
  31
  32           <http://support.intel.com>
  33
  34           to identify the adapter.
  35
  36           More specific information on configuring the driver is in
  37           <file:Documentation/networking/device_drivers/intel/e100.rst>.
  38
  39           To compile this driver as a module, choose M here. The module
  40           will be called e100.
  41
  42 config E1000
  43         tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
  44         depends on PCI
  45         help
  46           This driver supports Intel(R) PRO/1000 gigabit ethernet family of
  47           adapters.  For more information on how to identify your adapter, go
  48           to the Adapter & Driver ID Guide that can be located at:
  49
  50           <http://support.intel.com>
  51
  52           More specific information on configuring the driver is in
  53           <file:Documentation/networking/device_drivers/intel/e1000.rst>.
  54
  55           To compile this driver as a module, choose M here. The module
  56           will be called e1000.
  57
  58 config E1000E
  59         tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
  60         depends on PCI && (!SPARC32 || BROKEN)
  61         select CRC32
  62         imply PTP_1588_CLOCK
  63         help
  64           This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
  65           ethernet family of adapters. For PCI or PCI-X e1000 adapters,
  66           use the regular e1000 driver For more information on how to
  67           identify your adapter, go to the Adapter & Driver ID Guide that
  68           can be located at:
  69
  70           <http://support.intel.com>
  71
  72           More specific information on configuring the driver is in
  73           <file:Documentation/networking/device_drivers/intel/e1000e.rst>.
  74
  75           To compile this driver as a module, choose M here. The module
  76           will be called e1000e.
  77
  78 config E1000E_HWTS
  79         bool "Support HW cross-timestamp on PCH devices"
  80         default y
  81         depends on E1000E && X86
  82         help
  83          Say Y to enable hardware supported cross-timestamping on PCH
  84          devices. The cross-timestamp is available through the PTP clock
  85          driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
  86
  87 config IGB
  88         tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
  89         depends on PCI
  90         imply PTP_1588_CLOCK
  91         select I2C
  92         select I2C_ALGOBIT
  93         help
  94           This driver supports Intel(R) 82575/82576 gigabit ethernet family of
  95           adapters.  For more information on how to identify your adapter, go
  96           to the Adapter & Driver ID Guide that can be located at:
  97
  98           <http://support.intel.com>
  99
 100           More specific information on configuring the driver is in
 101           <file:Documentation/networking/device_drivers/intel/igb.rst>.
 102
 103           To compile this driver as a module, choose M here. The module
 104           will be called igb.
 105
 106 config IGB_HWMON
 107         bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
 108         default y
 109         depends on IGB && HWMON && !(IGB=y && HWMON=m)
 110         help
 111           Say Y if you want to expose thermal sensor data on Intel devices.
 112
 113           Some of our devices contain thermal sensors, both external and internal.
 114           This data is available via the hwmon sysfs interface and exposes
 115           the onboard sensors.
 116
 117 config IGB_DCA
 118         bool "Direct Cache Access (DCA) Support"
 119         default y
 120         depends on IGB && DCA && !(IGB=y && DCA=m)
 121         help
 122           Say Y here if you want to use Direct Cache Access (DCA) in the
 123           driver.  DCA is a method for warming the CPU cache before data
 124           is used, with the intent of lessening the impact of cache misses.
 125
 126 config IGBVF
 127         tristate "Intel(R) 82576 Virtual Function Ethernet support"
 128         depends on PCI
 129         help
 130           This driver supports Intel(R) 82576 virtual functions.  For more
 131           information on how to identify your adapter, go to the Adapter &
 132           Driver ID Guide that can be located at:
 133
 134           <http://support.intel.com>
 135
 136           More specific information on configuring the driver is in
 137           <file:Documentation/networking/device_drivers/intel/igbvf.rst>.
 138
 139           To compile this driver as a module, choose M here. The module
 140           will be called igbvf.
 141
 142 config IXGB
 143         tristate "Intel(R) PRO/10GbE support"
 144         depends on PCI
 145         help
 146           This driver supports Intel(R) PRO/10GbE family of adapters for
 147           PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
 148           instead. For more information on how to identify your adapter, go
 149           to the Adapter & Driver ID Guide that can be located at:
 150
 151           <http://support.intel.com>
 152
 153           More specific information on configuring the driver is in
 154           <file:Documentation/networking/device_drivers/intel/ixgb.rst>.
 155
 156           To compile this driver as a module, choose M here. The module
 157           will be called ixgb.
 158
 159 config IXGBE
 160         tristate "Intel(R) 10GbE PCI Express adapters support"
 161         depends on PCI
 162         select MDIO
 163         select PHYLIB
 164         imply PTP_1588_CLOCK
 165         help
 166           This driver supports Intel(R) 10GbE PCI Express family of
 167           adapters.  For more information on how to identify your adapter, go
 168           to the Adapter & Driver ID Guide that can be located at:
 169
 170           <http://support.intel.com>
 171
 172           More specific information on configuring the driver is in
 173           <file:Documentation/networking/device_drivers/intel/ixgbe.rst>.
 174
 175           To compile this driver as a module, choose M here. The module
 176           will be called ixgbe.
 177
 178 config IXGBE_HWMON
 179         bool "Intel(R) 10GbE PCI Express adapters HWMON support"
 180         default y
 181         depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
 182         help
 183           Say Y if you want to expose the thermal sensor data on some of
 184           our cards, via a hwmon sysfs interface.
 185
 186 config IXGBE_DCA
 187         bool "Direct Cache Access (DCA) Support"
 188         default y
 189         depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
 190         help
 191           Say Y here if you want to use Direct Cache Access (DCA) in the
 192           driver.  DCA is a method for warming the CPU cache before data
 193           is used, with the intent of lessening the impact of cache misses.
 194
 195 config IXGBE_DCB
 196         bool "Data Center Bridging (DCB) Support"
 197         default n
 198         depends on IXGBE && DCB
 199         help
 200           Say Y here if you want to use Data Center Bridging (DCB) in the
 201           driver.
 202
 203           If unsure, say N.
 204
 205 config IXGBE_IPSEC
 206         bool "IPSec XFRM cryptography-offload acceleration"
 207         depends on IXGBE
 208         depends on XFRM_OFFLOAD
 209         default y
 210         select XFRM_ALGO
 211         help
 212           Enable support for IPSec offload in ixgbe.ko
 213
 214 config IXGBEVF
 215         tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
 216         depends on PCI_MSI
 217         help
 218           This driver supports Intel(R) PCI Express virtual functions for the
 219           Intel(R) ixgbe driver.  For more information on how to identify your
 220           adapter, go to the Adapter & Driver ID Guide that can be located at:
 221
 222           <http://support.intel.com>
 223
 224           More specific information on configuring the driver is in
 225           <file:Documentation/networking/device_drivers/intel/ixgbevf.rst>.
 226
 227           To compile this driver as a module, choose M here. The module
 228           will be called ixgbevf.  MSI-X interrupt support is required
 229           for this driver to work correctly.
 230
 231 config IXGBEVF_IPSEC
 232         bool "IPSec XFRM cryptography-offload acceleration"
 233         depends on IXGBEVF
 234         depends on XFRM_OFFLOAD
 235         default y
 236         select XFRM_ALGO
 237         help
 238           Enable support for IPSec offload in ixgbevf.ko
 239
 240 config I40E
 241         tristate "Intel(R) Ethernet Controller XL710 Family support"
 242         imply PTP_1588_CLOCK
 243         depends on PCI
 244         help
 245           This driver supports Intel(R) Ethernet Controller XL710 Family of
 246           devices.  For more information on how to identify your adapter, go
 247           to the Adapter & Driver ID Guide that can be located at:
 248
 249           <http://support.intel.com>
 250
 251           More specific information on configuring the driver is in
 252           <file:Documentation/networking/device_drivers/intel/i40e.rst>.
 253
 254           To compile this driver as a module, choose M here. The module
 255           will be called i40e.
 256
 257 config I40E_DCB
 258         bool "Data Center Bridging (DCB) Support"
 259         default n
 260         depends on I40E && DCB
 261         help
 262           Say Y here if you want to use Data Center Bridging (DCB) in the
 263           driver.
 264
 265           If unsure, say N.
 266
 267 # this is here to allow seamless migration from I40EVF --> IAVF name
 268 # so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF
 269 config IAVF
 270         tristate
 271 config I40EVF
 272         tristate "Intel(R) Ethernet Adaptive Virtual Function support"
 273         select IAVF
 274         depends on PCI_MSI
 275         help
 276           This driver supports virtual functions for Intel XL710,
 277           X710, X722, XXV710, and all devices advertising support for
 278           Intel Ethernet Adaptive Virtual Function devices. For more
 279           information on how to identify your adapter, go to the Adapter
 280           & Driver ID Guide that can be located at:
 281
 282           <https://support.intel.com>
 283
 284           This driver was formerly named i40evf.
 285
 286           More specific information on configuring the driver is in
 287           <file:Documentation/networking/device_drivers/intel/iavf.rst>.
 288
 289           To compile this driver as a module, choose M here. The module
 290           will be called iavf.  MSI-X interrupt support is required
 291           for this driver to work correctly.
 292
 293 config ICE
 294         tristate "Intel(R) Ethernet Connection E800 Series Support"
 295         default n
 296         depends on PCI_MSI
 297         select NET_DEVLINK
 298         help
 299           This driver supports Intel(R) Ethernet Connection E800 Series of
 300           devices.  For more information on how to identify your adapter, go
 301           to the Adapter & Driver ID Guide that can be located at:
 302
 303           <http://support.intel.com>
 304
 305           More specific information on configuring the driver is in
 306           <file:Documentation/networking/device_drivers/intel/ice.rst>.
 307
 308           To compile this driver as a module, choose M here. The module
 309           will be called ice.
 310
 311 config FM10K
 312         tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
 313         default n
 314         depends on PCI_MSI
 315         imply PTP_1588_CLOCK
 316         help
 317           This driver supports Intel(R) FM10000 Ethernet Switch Host
 318           Interface.  For more information on how to identify your adapter,
 319           go to the Adapter & Driver ID Guide that can be located at:
 320
 321           <http://support.intel.com>
 322
 323           More specific information on configuring the driver is in
 324           <file:Documentation/networking/device_drivers/intel/fm10k.rst>.
 325
 326           To compile this driver as a module, choose M here. The module
 327           will be called fm10k.  MSI-X interrupt support is required
 328
 329 config IGC
 330         tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
 331         default n
 332         depends on PCI
 333         help
 334           This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
 335           family of adapters.
 336
 337           For more information on how to identify your adapter, go
 338           to the Adapter & Driver ID Guide that can be located at:
 339
 340           <http://support.intel.com>
 341
 342           To compile this driver as a module, choose M here. The module
 343           will be called igc.
 344
 345 endif # NET_VENDOR_INTEL