drivers/net/ethernet/intel/Kconfig

   1 #
   2 # Intel network device configuration
   3 #
   4
   5 config NET_VENDOR_INTEL
   6         bool "Intel devices"
   7         default y
   8         ---help---
   9           If you have a network (Ethernet) card belonging to this class, say Y.
  10
  11           Note that the answer to this question doesn't directly affect the
  12           kernel: saying N will just cause the configurator to skip all
  13           the questions about Intel cards. If you say Y, you will be asked for
  14           your specific card in the following questions.
  15
  16 if NET_VENDOR_INTEL
  17
  18 config E100
  19         tristate "Intel(R) PRO/100+ support"
  20         depends on PCI
  21         select MII
  22         ---help---
  23           This driver supports Intel(R) PRO/100 family of adapters.
  24           To verify that your adapter is supported, find the board ID number
  25           on the adapter. Look for a label that has a barcode and a number
  26           in the format 123456-001 (six digits hyphen three digits).
  27
  28           Use the above information and the Adapter & Driver ID Guide that
  29           can be located at:
  30
  31           <http://support.intel.com>
  32
  33           to identify the adapter.
  34
  35           More specific information on configuring the driver is in
  36           <file:Documentation/networking/e100.txt>.
  37
  38           To compile this driver as a module, choose M here. The module
  39           will be called e100.
  40
  41 config E1000
  42         tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
  43         depends on PCI
  44         ---help---
  45           This driver supports Intel(R) PRO/1000 gigabit ethernet family of
  46           adapters.  For more information on how to identify your adapter, go
  47           to the Adapter & Driver ID Guide that can be located at:
  48
  49           <http://support.intel.com>
  50
  51           More specific information on configuring the driver is in
  52           <file:Documentation/networking/e1000.txt>.
  53
  54           To compile this driver as a module, choose M here. The module
  55           will be called e1000.
  56
  57 config E1000E
  58         tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
  59         depends on PCI && (!SPARC32 || BROKEN)
  60         select CRC32
  61         select PTP_1588_CLOCK
  62         ---help---
  63           This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
  64           ethernet family of adapters. For PCI or PCI-X e1000 adapters,
  65           use the regular e1000 driver For more information on how to
  66           identify your adapter, go to the Adapter & Driver ID Guide that
  67           can be located at:
  68
  69           <http://support.intel.com>
  70
  71           To compile this driver as a module, choose M here. The module
  72           will be called e1000e.
  73
  74 config E1000E_HWTS
  75         bool "Support HW cross-timestamp on PCH devices"
  76         default y
  77         depends on E1000E && X86
  78         ---help---
  79          Say Y to enable hardware supported cross-timestamping on PCH
  80          devices. The cross-timestamp is available through the PTP clock
  81          driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
  82
  83 config IGB
  84         tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
  85         depends on PCI
  86         select PTP_1588_CLOCK
  87         select I2C
  88         select I2C_ALGOBIT
  89         ---help---
  90           This driver supports Intel(R) 82575/82576 gigabit ethernet family of
  91           adapters.  For more information on how to identify your adapter, go
  92           to the Adapter & Driver ID Guide that can be located at:
  93
  94           <http://support.intel.com>
  95
  96           More specific information on configuring the driver is in
  97           <file:Documentation/networking/e1000.txt>.
  98
  99           To compile this driver as a module, choose M here. The module
 100           will be called igb.
 101
 102 config IGB_HWMON
 103         bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
 104         default y
 105         depends on IGB && HWMON && !(IGB=y && HWMON=m)
 106         ---help---
 107           Say Y if you want to expose thermal sensor data on Intel devices.
 108
 109           Some of our devices contain thermal sensors, both external and internal.
 110           This data is available via the hwmon sysfs interface and exposes
 111           the onboard sensors.
 112
 113 config IGB_DCA
 114         bool "Direct Cache Access (DCA) Support"
 115         default y
 116         depends on IGB && DCA && !(IGB=y && DCA=m)
 117         ---help---
 118           Say Y here if you want to use Direct Cache Access (DCA) in the
 119           driver.  DCA is a method for warming the CPU cache before data
 120           is used, with the intent of lessening the impact of cache misses.
 121
 122 config IGBVF
 123         tristate "Intel(R) 82576 Virtual Function Ethernet support"
 124         depends on PCI
 125         ---help---
 126           This driver supports Intel(R) 82576 virtual functions.  For more
 127           information on how to identify your adapter, go to the Adapter &
 128           Driver ID Guide that can be located at:
 129
 130           <http://support.intel.com>
 131
 132           More specific information on configuring the driver is in
 133           <file:Documentation/networking/e1000.txt>.
 134
 135           To compile this driver as a module, choose M here. The module
 136           will be called igbvf.
 137
 138 config IXGB
 139         tristate "Intel(R) PRO/10GbE support"
 140         depends on PCI
 141         ---help---
 142           This driver supports Intel(R) PRO/10GbE family of adapters for
 143           PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
 144           instead. For more information on how to identify your adapter, go
 145           to the Adapter & Driver ID Guide that can be located at:
 146
 147           <http://support.intel.com>
 148
 149           More specific information on configuring the driver is in
 150           <file:Documentation/networking/ixgb.txt>.
 151
 152           To compile this driver as a module, choose M here. The module
 153           will be called ixgb.
 154
 155 config IXGBE
 156         tristate "Intel(R) 10GbE PCI Express adapters support"
 157         depends on PCI
 158         select MDIO
 159         select PTP_1588_CLOCK
 160         ---help---
 161           This driver supports Intel(R) 10GbE PCI Express family of
 162           adapters.  For more information on how to identify your adapter, go
 163           to the Adapter & Driver ID Guide that can be located at:
 164
 165           <http://support.intel.com>
 166
 167           To compile this driver as a module, choose M here. The module
 168           will be called ixgbe.
 169
 170 config IXGBE_HWMON
 171         bool "Intel(R) 10GbE PCI Express adapters HWMON support"
 172         default y
 173         depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
 174         ---help---
 175           Say Y if you want to expose the thermal sensor data on some of
 176           our cards, via a hwmon sysfs interface.
 177
 178 config IXGBE_DCA
 179         bool "Direct Cache Access (DCA) Support"
 180         default y
 181         depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
 182         ---help---
 183           Say Y here if you want to use Direct Cache Access (DCA) in the
 184           driver.  DCA is a method for warming the CPU cache before data
 185           is used, with the intent of lessening the impact of cache misses.
 186
 187 config IXGBE_DCB
 188         bool "Data Center Bridging (DCB) Support"
 189         default n
 190         depends on IXGBE && DCB
 191         ---help---
 192           Say Y here if you want to use Data Center Bridging (DCB) in the
 193           driver.
 194
 195           If unsure, say N.
 196
 197 config IXGBEVF
 198         tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
 199         depends on PCI_MSI
 200         ---help---
 201           This driver supports Intel(R) PCI Express virtual functions for the
 202           Intel(R) ixgbe driver.  For more information on how to identify your
 203           adapter, go to the Adapter & Driver ID Guide that can be located at:
 204
 205           <http://support.intel.com>
 206
 207           More specific information on configuring the driver is in
 208           <file:Documentation/networking/ixgbevf.txt>.
 209
 210           To compile this driver as a module, choose M here. The module
 211           will be called ixgbevf.  MSI-X interrupt support is required
 212           for this driver to work correctly.
 213
 214 config I40E
 215         tristate "Intel(R) Ethernet Controller XL710 Family support"
 216         select PTP_1588_CLOCK
 217         depends on PCI
 218         ---help---
 219           This driver supports Intel(R) Ethernet Controller XL710 Family of
 220           devices.  For more information on how to identify your adapter, go
 221           to the Adapter & Driver ID Guide that can be located at:
 222
 223           <http://support.intel.com>
 224
 225           To compile this driver as a module, choose M here. The module
 226           will be called i40e.
 227
 228 config I40E_DCB
 229         bool "Data Center Bridging (DCB) Support"
 230         default n
 231         depends on I40E && DCB
 232         ---help---
 233           Say Y here if you want to use Data Center Bridging (DCB) in the
 234           driver.
 235
 236           If unsure, say N.
 237
 238 config I40E_FCOE
 239         bool "Fibre Channel over Ethernet (FCoE)"
 240         default n
 241         depends on I40E && DCB && FCOE
 242         ---help---
 243           Say Y here if you want to use Fibre Channel over Ethernet (FCoE)
 244           in the driver. This will create new netdev for exclusive FCoE
 245           use with XL710 FCoE offloads enabled.
 246
 247           If unsure, say N.
 248
 249 config I40EVF
 250         tristate "Intel(R) XL710 X710 Virtual Function Ethernet support"
 251         depends on PCI_MSI
 252         ---help---
 253           This driver supports Intel(R) XL710 and X710 virtual functions.
 254           For more information on how to identify your adapter, go to the
 255           Adapter & Driver ID Guide that can be located at:
 256
 257           <http://support.intel.com>
 258
 259           To compile this driver as a module, choose M here. The module
 260           will be called i40evf.  MSI-X interrupt support is required
 261           for this driver to work correctly.
 262
 263 config FM10K
 264         tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
 265         default n
 266         depends on PCI_MSI
 267         select PTP_1588_CLOCK
 268         ---help---
 269           This driver supports Intel(R) FM10000 Ethernet Switch Host
 270           Interface.  For more information on how to identify your adapter,
 271           go to the Adapter & Driver ID Guide that can be located at:
 272
 273           <http://support.intel.com>
 274
 275           To compile this driver as a module, choose M here. The module
 276           will be called fm10k.  MSI-X interrupt support is required
 277
 278 endif # NET_VENDOR_INTEL