1 /*************************************************************************
2 * myri10ge.c: Myricom Myri-10G Ethernet driver.
4 * Copyright (C) 2005 - 2011 Myricom, Inc.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. Neither the name of Myricom, Inc. nor the names of its contributors
16 * may be used to endorse or promote products derived from this software
17 * without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
32 * If the eeprom on your board is not recent enough, you will need to get a
33 * newer firmware image at:
34 * http://www.myri.com/scs/download-Myri10GE.html
36 * Contact Information:
38 * Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
39 *************************************************************************/
41 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
43 #include <linux/tcp.h>
44 #include <linux/netdevice.h>
45 #include <linux/skbuff.h>
46 #include <linux/string.h>
47 #include <linux/module.h>
48 #include <linux/pci.h>
49 #include <linux/dma-mapping.h>
50 #include <linux/etherdevice.h>
51 #include <linux/if_ether.h>
52 #include <linux/if_vlan.h>
53 #include <linux/dca.h>
55 #include <linux/inet.h>
57 #include <linux/ethtool.h>
58 #include <linux/firmware.h>
59 #include <linux/delay.h>
60 #include <linux/timer.h>
61 #include <linux/vmalloc.h>
62 #include <linux/crc32.h>
63 #include <linux/moduleparam.h>
65 #include <linux/log2.h>
66 #include <linux/slab.h>
67 #include <linux/prefetch.h>
68 #include <net/checksum.h>
71 #include <asm/byteorder.h>
73 #include <asm/processor.h>
78 #include "myri10ge_mcp.h"
79 #include "myri10ge_mcp_gen_header.h"
81 #define MYRI10GE_VERSION_STR "1.5.3-1.534"
83 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
84 MODULE_AUTHOR("Maintainer: help@myri.com");
85 MODULE_VERSION(MYRI10GE_VERSION_STR
);
86 MODULE_LICENSE("Dual BSD/GPL");
88 #define MYRI10GE_MAX_ETHER_MTU 9014
90 #define MYRI10GE_ETH_STOPPED 0
91 #define MYRI10GE_ETH_STOPPING 1
92 #define MYRI10GE_ETH_STARTING 2
93 #define MYRI10GE_ETH_RUNNING 3
94 #define MYRI10GE_ETH_OPEN_FAILED 4
96 #define MYRI10GE_EEPROM_STRINGS_SIZE 256
97 #define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
99 #define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
100 #define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
102 #define MYRI10GE_ALLOC_ORDER 0
103 #define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
104 #define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
106 #define MYRI10GE_MAX_SLICES 32
108 struct myri10ge_rx_buffer_state
{
111 DEFINE_DMA_UNMAP_ADDR(bus
);
112 DEFINE_DMA_UNMAP_LEN(len
);
115 struct myri10ge_tx_buffer_state
{
118 DEFINE_DMA_UNMAP_ADDR(bus
);
119 DEFINE_DMA_UNMAP_LEN(len
);
122 struct myri10ge_cmd
{
128 struct myri10ge_rx_buf
{
129 struct mcp_kreq_ether_recv __iomem
*lanai
; /* lanai ptr for recv ring */
130 struct mcp_kreq_ether_recv
*shadow
; /* host shadow of recv ring */
131 struct myri10ge_rx_buffer_state
*info
;
138 int mask
; /* number of rx slots -1 */
142 struct myri10ge_tx_buf
{
143 struct mcp_kreq_ether_send __iomem
*lanai
; /* lanai ptr for sendq */
144 __be32 __iomem
*send_go
; /* "go" doorbell ptr */
145 __be32 __iomem
*send_stop
; /* "stop" doorbell ptr */
146 struct mcp_kreq_ether_send
*req_list
; /* host shadow of sendq */
148 struct myri10ge_tx_buffer_state
*info
;
149 int mask
; /* number of transmit slots -1 */
150 int req ____cacheline_aligned
; /* transmit slots submitted */
151 int pkt_start
; /* packets started */
154 int done ____cacheline_aligned
; /* transmit slots completed */
155 int pkt_done
; /* packets completed */
160 struct myri10ge_rx_done
{
161 struct mcp_slot
*entry
;
167 struct myri10ge_slice_netstats
{
168 unsigned long rx_packets
;
169 unsigned long tx_packets
;
170 unsigned long rx_bytes
;
171 unsigned long tx_bytes
;
172 unsigned long rx_dropped
;
173 unsigned long tx_dropped
;
176 struct myri10ge_slice_state
{
177 struct myri10ge_tx_buf tx
; /* transmit ring */
178 struct myri10ge_rx_buf rx_small
;
179 struct myri10ge_rx_buf rx_big
;
180 struct myri10ge_rx_done rx_done
;
181 struct net_device
*dev
;
182 struct napi_struct napi
;
183 struct myri10ge_priv
*mgp
;
184 struct myri10ge_slice_netstats stats
;
185 __be32 __iomem
*irq_claim
;
186 struct mcp_irq_data
*fw_stats
;
187 dma_addr_t fw_stats_bus
;
188 int watchdog_tx_done
;
190 int watchdog_rx_done
;
192 #ifdef CONFIG_MYRI10GE_DCA
195 __be32 __iomem
*dca_tag
;
200 struct myri10ge_priv
{
201 struct myri10ge_slice_state
*ss
;
202 int tx_boundary
; /* boundary transmits cannot cross */
204 int running
; /* running? */
208 struct net_device
*dev
;
211 unsigned long board_span
;
212 unsigned long iomem_base
;
213 __be32 __iomem
*irq_deassert
;
214 char *mac_addr_string
;
215 struct mcp_cmd_response
*cmd
;
217 struct pci_dev
*pdev
;
220 struct msix_entry
*msix_vectors
;
221 #ifdef CONFIG_MYRI10GE_DCA
226 unsigned int rdma_tags_available
;
228 __be32 __iomem
*intr_coal_delay_ptr
;
232 wait_queue_head_t down_wq
;
233 struct work_struct watchdog_work
;
234 struct timer_list watchdog_timer
;
238 bool fw_name_allocated
;
240 char eeprom_strings
[MYRI10GE_EEPROM_STRINGS_SIZE
];
241 char *product_code_string
;
242 char fw_version
[128];
246 int adopted_rx_filter_bug
;
247 u8 mac_addr
[6]; /* eeprom mac address */
248 unsigned long serial_number
;
249 int vendor_specific_offset
;
250 int fw_multicast_support
;
258 unsigned int board_number
;
262 static char *myri10ge_fw_unaligned
= "myri10ge_ethp_z8e.dat";
263 static char *myri10ge_fw_aligned
= "myri10ge_eth_z8e.dat";
264 static char *myri10ge_fw_rss_unaligned
= "myri10ge_rss_ethp_z8e.dat";
265 static char *myri10ge_fw_rss_aligned
= "myri10ge_rss_eth_z8e.dat";
266 MODULE_FIRMWARE("myri10ge_ethp_z8e.dat");
267 MODULE_FIRMWARE("myri10ge_eth_z8e.dat");
268 MODULE_FIRMWARE("myri10ge_rss_ethp_z8e.dat");
269 MODULE_FIRMWARE("myri10ge_rss_eth_z8e.dat");
271 /* Careful: must be accessed under kparam_block_sysfs_write */
272 static char *myri10ge_fw_name
= NULL
;
273 module_param(myri10ge_fw_name
, charp
, S_IRUGO
| S_IWUSR
);
274 MODULE_PARM_DESC(myri10ge_fw_name
, "Firmware image name");
276 #define MYRI10GE_MAX_BOARDS 8
277 static char *myri10ge_fw_names
[MYRI10GE_MAX_BOARDS
] =
278 {[0 ... (MYRI10GE_MAX_BOARDS
- 1)] = NULL
};
279 module_param_array_named(myri10ge_fw_names
, myri10ge_fw_names
, charp
, NULL
,
281 MODULE_PARM_DESC(myri10ge_fw_name
, "Firmware image names per board");
283 static int myri10ge_ecrc_enable
= 1;
284 module_param(myri10ge_ecrc_enable
, int, S_IRUGO
);
285 MODULE_PARM_DESC(myri10ge_ecrc_enable
, "Enable Extended CRC on PCI-E");
287 static int myri10ge_small_bytes
= -1; /* -1 == auto */
288 module_param(myri10ge_small_bytes
, int, S_IRUGO
| S_IWUSR
);
289 MODULE_PARM_DESC(myri10ge_small_bytes
, "Threshold of small packets");
291 static int myri10ge_msi
= 1; /* enable msi by default */
292 module_param(myri10ge_msi
, int, S_IRUGO
| S_IWUSR
);
293 MODULE_PARM_DESC(myri10ge_msi
, "Enable Message Signalled Interrupts");
295 static int myri10ge_intr_coal_delay
= 75;
296 module_param(myri10ge_intr_coal_delay
, int, S_IRUGO
);
297 MODULE_PARM_DESC(myri10ge_intr_coal_delay
, "Interrupt coalescing delay");
299 static int myri10ge_flow_control
= 1;
300 module_param(myri10ge_flow_control
, int, S_IRUGO
);
301 MODULE_PARM_DESC(myri10ge_flow_control
, "Pause parameter");
303 static int myri10ge_deassert_wait
= 1;
304 module_param(myri10ge_deassert_wait
, int, S_IRUGO
| S_IWUSR
);
305 MODULE_PARM_DESC(myri10ge_deassert_wait
,
306 "Wait when deasserting legacy interrupts");
308 static int myri10ge_force_firmware
= 0;
309 module_param(myri10ge_force_firmware
, int, S_IRUGO
);
310 MODULE_PARM_DESC(myri10ge_force_firmware
,
311 "Force firmware to assume aligned completions");
313 static int myri10ge_initial_mtu
= MYRI10GE_MAX_ETHER_MTU
- ETH_HLEN
;
314 module_param(myri10ge_initial_mtu
, int, S_IRUGO
);
315 MODULE_PARM_DESC(myri10ge_initial_mtu
, "Initial MTU");
317 static int myri10ge_napi_weight
= 64;
318 module_param(myri10ge_napi_weight
, int, S_IRUGO
);
319 MODULE_PARM_DESC(myri10ge_napi_weight
, "Set NAPI weight");
321 static int myri10ge_watchdog_timeout
= 1;
322 module_param(myri10ge_watchdog_timeout
, int, S_IRUGO
);
323 MODULE_PARM_DESC(myri10ge_watchdog_timeout
, "Set watchdog timeout");
325 static int myri10ge_max_irq_loops
= 1048576;
326 module_param(myri10ge_max_irq_loops
, int, S_IRUGO
);
327 MODULE_PARM_DESC(myri10ge_max_irq_loops
,
328 "Set stuck legacy IRQ detection threshold");
330 #define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
332 static int myri10ge_debug
= -1; /* defaults above */
333 module_param(myri10ge_debug
, int, 0);
334 MODULE_PARM_DESC(myri10ge_debug
, "Debug level (0=none,...,16=all)");
336 static int myri10ge_fill_thresh
= 256;
337 module_param(myri10ge_fill_thresh
, int, S_IRUGO
| S_IWUSR
);
338 MODULE_PARM_DESC(myri10ge_fill_thresh
, "Number of empty rx slots allowed");
340 static int myri10ge_reset_recover
= 1;
342 static int myri10ge_max_slices
= 1;
343 module_param(myri10ge_max_slices
, int, S_IRUGO
);
344 MODULE_PARM_DESC(myri10ge_max_slices
, "Max tx/rx queues");
346 static int myri10ge_rss_hash
= MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT
;
347 module_param(myri10ge_rss_hash
, int, S_IRUGO
);
348 MODULE_PARM_DESC(myri10ge_rss_hash
, "Type of RSS hashing to do");
350 static int myri10ge_dca
= 1;
351 module_param(myri10ge_dca
, int, S_IRUGO
);
352 MODULE_PARM_DESC(myri10ge_dca
, "Enable DCA if possible");
354 #define MYRI10GE_FW_OFFSET 1024*1024
355 #define MYRI10GE_HIGHPART_TO_U32(X) \
356 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
357 #define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
359 #define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
361 static void myri10ge_set_multicast_list(struct net_device
*dev
);
362 static netdev_tx_t
myri10ge_sw_tso(struct sk_buff
*skb
,
363 struct net_device
*dev
);
365 static inline void put_be32(__be32 val
, __be32 __iomem
* p
)
367 __raw_writel((__force __u32
) val
, (__force
void __iomem
*)p
);
370 static struct rtnl_link_stats64
*myri10ge_get_stats(struct net_device
*dev
,
371 struct rtnl_link_stats64
*stats
);
373 static void set_fw_name(struct myri10ge_priv
*mgp
, char *name
, bool allocated
)
375 if (mgp
->fw_name_allocated
)
378 mgp
->fw_name_allocated
= allocated
;
382 myri10ge_send_cmd(struct myri10ge_priv
*mgp
, u32 cmd
,
383 struct myri10ge_cmd
*data
, int atomic
)
386 char buf_bytes
[sizeof(*buf
) + 8];
387 struct mcp_cmd_response
*response
= mgp
->cmd
;
388 char __iomem
*cmd_addr
= mgp
->sram
+ MXGEFW_ETH_CMD
;
389 u32 dma_low
, dma_high
, result
, value
;
392 /* ensure buf is aligned to 8 bytes */
393 buf
= (struct mcp_cmd
*)ALIGN((unsigned long)buf_bytes
, 8);
395 buf
->data0
= htonl(data
->data0
);
396 buf
->data1
= htonl(data
->data1
);
397 buf
->data2
= htonl(data
->data2
);
398 buf
->cmd
= htonl(cmd
);
399 dma_low
= MYRI10GE_LOWPART_TO_U32(mgp
->cmd_bus
);
400 dma_high
= MYRI10GE_HIGHPART_TO_U32(mgp
->cmd_bus
);
402 buf
->response_addr
.low
= htonl(dma_low
);
403 buf
->response_addr
.high
= htonl(dma_high
);
404 response
->result
= htonl(MYRI10GE_NO_RESPONSE_RESULT
);
406 myri10ge_pio_copy(cmd_addr
, buf
, sizeof(*buf
));
408 /* wait up to 15ms. Longest command is the DMA benchmark,
409 * which is capped at 5ms, but runs from a timeout handler
410 * that runs every 7.8ms. So a 15ms timeout leaves us with
414 /* if atomic is set, do not sleep,
415 * and try to get the completion quickly
416 * (1ms will be enough for those commands) */
417 for (sleep_total
= 0;
418 sleep_total
< 1000 &&
419 response
->result
== htonl(MYRI10GE_NO_RESPONSE_RESULT
);
425 /* use msleep for most command */
426 for (sleep_total
= 0;
428 response
->result
== htonl(MYRI10GE_NO_RESPONSE_RESULT
);
433 result
= ntohl(response
->result
);
434 value
= ntohl(response
->data
);
435 if (result
!= MYRI10GE_NO_RESPONSE_RESULT
) {
439 } else if (result
== MXGEFW_CMD_UNKNOWN
) {
441 } else if (result
== MXGEFW_CMD_ERROR_UNALIGNED
) {
443 } else if (result
== MXGEFW_CMD_ERROR_RANGE
&&
444 cmd
== MXGEFW_CMD_ENABLE_RSS_QUEUES
&&
446 data1
& MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES
) !=
450 dev_err(&mgp
->pdev
->dev
,
451 "command %d failed, result = %d\n",
457 dev_err(&mgp
->pdev
->dev
, "command %d timed out, result = %d\n",
463 * The eeprom strings on the lanaiX have the format
466 * PT:ddd mmm xx xx:xx:xx xx\0
467 * PV:ddd mmm xx xx:xx:xx xx\0
469 static int myri10ge_read_mac_addr(struct myri10ge_priv
*mgp
)
474 ptr
= mgp
->eeprom_strings
;
475 limit
= mgp
->eeprom_strings
+ MYRI10GE_EEPROM_STRINGS_SIZE
;
477 while (*ptr
!= '\0' && ptr
< limit
) {
478 if (memcmp(ptr
, "MAC=", 4) == 0) {
480 mgp
->mac_addr_string
= ptr
;
481 for (i
= 0; i
< 6; i
++) {
482 if ((ptr
+ 2) > limit
)
485 simple_strtoul(ptr
, &ptr
, 16);
489 if (memcmp(ptr
, "PC=", 3) == 0) {
491 mgp
->product_code_string
= ptr
;
493 if (memcmp((const void *)ptr
, "SN=", 3) == 0) {
495 mgp
->serial_number
= simple_strtoul(ptr
, &ptr
, 10);
497 while (ptr
< limit
&& *ptr
++) ;
503 dev_err(&mgp
->pdev
->dev
, "failed to parse eeprom_strings\n");
508 * Enable or disable periodic RDMAs from the host to make certain
509 * chipsets resend dropped PCIe messages
512 static void myri10ge_dummy_rdma(struct myri10ge_priv
*mgp
, int enable
)
514 char __iomem
*submit
;
515 __be32 buf
[16] __attribute__ ((__aligned__(8)));
516 u32 dma_low
, dma_high
;
519 /* clear confirmation addr */
523 /* send a rdma command to the PCIe engine, and wait for the
524 * response in the confirmation address. The firmware should
525 * write a -1 there to indicate it is alive and well
527 dma_low
= MYRI10GE_LOWPART_TO_U32(mgp
->cmd_bus
);
528 dma_high
= MYRI10GE_HIGHPART_TO_U32(mgp
->cmd_bus
);
530 buf
[0] = htonl(dma_high
); /* confirm addr MSW */
531 buf
[1] = htonl(dma_low
); /* confirm addr LSW */
532 buf
[2] = MYRI10GE_NO_CONFIRM_DATA
; /* confirm data */
533 buf
[3] = htonl(dma_high
); /* dummy addr MSW */
534 buf
[4] = htonl(dma_low
); /* dummy addr LSW */
535 buf
[5] = htonl(enable
); /* enable? */
537 submit
= mgp
->sram
+ MXGEFW_BOOT_DUMMY_RDMA
;
539 myri10ge_pio_copy(submit
, &buf
, sizeof(buf
));
540 for (i
= 0; mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
&& i
< 20; i
++)
542 if (mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
)
543 dev_err(&mgp
->pdev
->dev
, "dummy rdma %s failed\n",
544 (enable
? "enable" : "disable"));
548 myri10ge_validate_firmware(struct myri10ge_priv
*mgp
,
549 struct mcp_gen_header
*hdr
)
551 struct device
*dev
= &mgp
->pdev
->dev
;
553 /* check firmware type */
554 if (ntohl(hdr
->mcp_type
) != MCP_TYPE_ETH
) {
555 dev_err(dev
, "Bad firmware type: 0x%x\n", ntohl(hdr
->mcp_type
));
559 /* save firmware version for ethtool */
560 strncpy(mgp
->fw_version
, hdr
->version
, sizeof(mgp
->fw_version
));
562 sscanf(mgp
->fw_version
, "%d.%d.%d", &mgp
->fw_ver_major
,
563 &mgp
->fw_ver_minor
, &mgp
->fw_ver_tiny
);
565 if (!(mgp
->fw_ver_major
== MXGEFW_VERSION_MAJOR
&&
566 mgp
->fw_ver_minor
== MXGEFW_VERSION_MINOR
)) {
567 dev_err(dev
, "Found firmware version %s\n", mgp
->fw_version
);
568 dev_err(dev
, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR
,
569 MXGEFW_VERSION_MINOR
);
575 static int myri10ge_load_hotplug_firmware(struct myri10ge_priv
*mgp
, u32
* size
)
577 unsigned crc
, reread_crc
;
578 const struct firmware
*fw
;
579 struct device
*dev
= &mgp
->pdev
->dev
;
580 unsigned char *fw_readback
;
581 struct mcp_gen_header
*hdr
;
586 if ((status
= request_firmware(&fw
, mgp
->fw_name
, dev
)) < 0) {
587 dev_err(dev
, "Unable to load %s firmware image via hotplug\n",
590 goto abort_with_nothing
;
595 if (fw
->size
>= mgp
->sram_size
- MYRI10GE_FW_OFFSET
||
596 fw
->size
< MCP_HEADER_PTR_OFFSET
+ 4) {
597 dev_err(dev
, "Firmware size invalid:%d\n", (int)fw
->size
);
603 hdr_offset
= ntohl(*(__be32
*) (fw
->data
+ MCP_HEADER_PTR_OFFSET
));
604 if ((hdr_offset
& 3) || hdr_offset
+ sizeof(*hdr
) > fw
->size
) {
605 dev_err(dev
, "Bad firmware file\n");
609 hdr
= (void *)(fw
->data
+ hdr_offset
);
611 status
= myri10ge_validate_firmware(mgp
, hdr
);
615 crc
= crc32(~0, fw
->data
, fw
->size
);
616 for (i
= 0; i
< fw
->size
; i
+= 256) {
617 myri10ge_pio_copy(mgp
->sram
+ MYRI10GE_FW_OFFSET
+ i
,
619 min(256U, (unsigned)(fw
->size
- i
)));
623 fw_readback
= vmalloc(fw
->size
);
628 /* corruption checking is good for parity recovery and buggy chipset */
629 memcpy_fromio(fw_readback
, mgp
->sram
+ MYRI10GE_FW_OFFSET
, fw
->size
);
630 reread_crc
= crc32(~0, fw_readback
, fw
->size
);
632 if (crc
!= reread_crc
) {
633 dev_err(dev
, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
634 (unsigned)fw
->size
, reread_crc
, crc
);
638 *size
= (u32
) fw
->size
;
641 release_firmware(fw
);
647 static int myri10ge_adopt_running_firmware(struct myri10ge_priv
*mgp
)
649 struct mcp_gen_header
*hdr
;
650 struct device
*dev
= &mgp
->pdev
->dev
;
651 const size_t bytes
= sizeof(struct mcp_gen_header
);
655 /* find running firmware header */
656 hdr_offset
= swab32(readl(mgp
->sram
+ MCP_HEADER_PTR_OFFSET
));
658 if ((hdr_offset
& 3) || hdr_offset
+ sizeof(*hdr
) > mgp
->sram_size
) {
659 dev_err(dev
, "Running firmware has bad header offset (%d)\n",
664 /* copy header of running firmware from SRAM to host memory to
665 * validate firmware */
666 hdr
= kmalloc(bytes
, GFP_KERNEL
);
670 memcpy_fromio(hdr
, mgp
->sram
+ hdr_offset
, bytes
);
671 status
= myri10ge_validate_firmware(mgp
, hdr
);
674 /* check to see if adopted firmware has bug where adopting
675 * it will cause broadcasts to be filtered unless the NIC
676 * is kept in ALLMULTI mode */
677 if (mgp
->fw_ver_major
== 1 && mgp
->fw_ver_minor
== 4 &&
678 mgp
->fw_ver_tiny
>= 4 && mgp
->fw_ver_tiny
<= 11) {
679 mgp
->adopted_rx_filter_bug
= 1;
680 dev_warn(dev
, "Adopting fw %d.%d.%d: "
681 "working around rx filter bug\n",
682 mgp
->fw_ver_major
, mgp
->fw_ver_minor
,
688 static int myri10ge_get_firmware_capabilities(struct myri10ge_priv
*mgp
)
690 struct myri10ge_cmd cmd
;
693 /* probe for IPv6 TSO support */
694 mgp
->features
= NETIF_F_SG
| NETIF_F_HW_CSUM
| NETIF_F_TSO
;
695 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE
,
698 mgp
->max_tso6
= cmd
.data0
;
699 mgp
->features
|= NETIF_F_TSO6
;
702 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_RX_RING_SIZE
, &cmd
, 0);
704 dev_err(&mgp
->pdev
->dev
,
705 "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
709 mgp
->max_intr_slots
= 2 * (cmd
.data0
/ sizeof(struct mcp_dma_addr
));
714 static int myri10ge_load_firmware(struct myri10ge_priv
*mgp
, int adopt
)
716 char __iomem
*submit
;
717 __be32 buf
[16] __attribute__ ((__aligned__(8)));
718 u32 dma_low
, dma_high
, size
;
722 status
= myri10ge_load_hotplug_firmware(mgp
, &size
);
726 dev_warn(&mgp
->pdev
->dev
, "hotplug firmware loading failed\n");
728 /* Do not attempt to adopt firmware if there
733 status
= myri10ge_adopt_running_firmware(mgp
);
735 dev_err(&mgp
->pdev
->dev
,
736 "failed to adopt running firmware\n");
739 dev_info(&mgp
->pdev
->dev
,
740 "Successfully adopted running firmware\n");
741 if (mgp
->tx_boundary
== 4096) {
742 dev_warn(&mgp
->pdev
->dev
,
743 "Using firmware currently running on NIC"
745 dev_warn(&mgp
->pdev
->dev
,
746 "performance consider loading optimized "
748 dev_warn(&mgp
->pdev
->dev
, "via hotplug\n");
751 set_fw_name(mgp
, "adopted", false);
752 mgp
->tx_boundary
= 2048;
753 myri10ge_dummy_rdma(mgp
, 1);
754 status
= myri10ge_get_firmware_capabilities(mgp
);
758 /* clear confirmation addr */
762 /* send a reload command to the bootstrap MCP, and wait for the
763 * response in the confirmation address. The firmware should
764 * write a -1 there to indicate it is alive and well
766 dma_low
= MYRI10GE_LOWPART_TO_U32(mgp
->cmd_bus
);
767 dma_high
= MYRI10GE_HIGHPART_TO_U32(mgp
->cmd_bus
);
769 buf
[0] = htonl(dma_high
); /* confirm addr MSW */
770 buf
[1] = htonl(dma_low
); /* confirm addr LSW */
771 buf
[2] = MYRI10GE_NO_CONFIRM_DATA
; /* confirm data */
773 /* FIX: All newest firmware should un-protect the bottom of
774 * the sram before handoff. However, the very first interfaces
775 * do not. Therefore the handoff copy must skip the first 8 bytes
777 buf
[3] = htonl(MYRI10GE_FW_OFFSET
+ 8); /* where the code starts */
778 buf
[4] = htonl(size
- 8); /* length of code */
779 buf
[5] = htonl(8); /* where to copy to */
780 buf
[6] = htonl(0); /* where to jump to */
782 submit
= mgp
->sram
+ MXGEFW_BOOT_HANDOFF
;
784 myri10ge_pio_copy(submit
, &buf
, sizeof(buf
));
789 while (mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
&& i
< 9) {
793 if (mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
) {
794 dev_err(&mgp
->pdev
->dev
, "handoff failed\n");
797 myri10ge_dummy_rdma(mgp
, 1);
798 status
= myri10ge_get_firmware_capabilities(mgp
);
803 static int myri10ge_update_mac_address(struct myri10ge_priv
*mgp
, u8
* addr
)
805 struct myri10ge_cmd cmd
;
808 cmd
.data0
= ((addr
[0] << 24) | (addr
[1] << 16)
809 | (addr
[2] << 8) | addr
[3]);
811 cmd
.data1
= ((addr
[4] << 8) | (addr
[5]));
813 status
= myri10ge_send_cmd(mgp
, MXGEFW_SET_MAC_ADDRESS
, &cmd
, 0);
817 static int myri10ge_change_pause(struct myri10ge_priv
*mgp
, int pause
)
819 struct myri10ge_cmd cmd
;
822 ctl
= pause
? MXGEFW_ENABLE_FLOW_CONTROL
: MXGEFW_DISABLE_FLOW_CONTROL
;
823 status
= myri10ge_send_cmd(mgp
, ctl
, &cmd
, 0);
826 netdev_err(mgp
->dev
, "Failed to set flow control mode\n");
834 myri10ge_change_promisc(struct myri10ge_priv
*mgp
, int promisc
, int atomic
)
836 struct myri10ge_cmd cmd
;
839 ctl
= promisc
? MXGEFW_ENABLE_PROMISC
: MXGEFW_DISABLE_PROMISC
;
840 status
= myri10ge_send_cmd(mgp
, ctl
, &cmd
, atomic
);
842 netdev_err(mgp
->dev
, "Failed to set promisc mode\n");
845 static int myri10ge_dma_test(struct myri10ge_priv
*mgp
, int test_type
)
847 struct myri10ge_cmd cmd
;
850 struct page
*dmatest_page
;
851 dma_addr_t dmatest_bus
;
854 dmatest_page
= alloc_page(GFP_KERNEL
);
857 dmatest_bus
= pci_map_page(mgp
->pdev
, dmatest_page
, 0, PAGE_SIZE
,
860 /* Run a small DMA test.
861 * The magic multipliers to the length tell the firmware
862 * to do DMA read, write, or read+write tests. The
863 * results are returned in cmd.data0. The upper 16
864 * bits or the return is the number of transfers completed.
865 * The lower 16 bits is the time in 0.5us ticks that the
866 * transfers took to complete.
869 len
= mgp
->tx_boundary
;
871 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(dmatest_bus
);
872 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(dmatest_bus
);
873 cmd
.data2
= len
* 0x10000;
874 status
= myri10ge_send_cmd(mgp
, test_type
, &cmd
, 0);
879 mgp
->read_dma
= ((cmd
.data0
>> 16) * len
* 2) / (cmd
.data0
& 0xffff);
880 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(dmatest_bus
);
881 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(dmatest_bus
);
882 cmd
.data2
= len
* 0x1;
883 status
= myri10ge_send_cmd(mgp
, test_type
, &cmd
, 0);
888 mgp
->write_dma
= ((cmd
.data0
>> 16) * len
* 2) / (cmd
.data0
& 0xffff);
890 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(dmatest_bus
);
891 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(dmatest_bus
);
892 cmd
.data2
= len
* 0x10001;
893 status
= myri10ge_send_cmd(mgp
, test_type
, &cmd
, 0);
898 mgp
->read_write_dma
= ((cmd
.data0
>> 16) * len
* 2 * 2) /
899 (cmd
.data0
& 0xffff);
902 pci_unmap_page(mgp
->pdev
, dmatest_bus
, PAGE_SIZE
, DMA_BIDIRECTIONAL
);
903 put_page(dmatest_page
);
905 if (status
!= 0 && test_type
!= MXGEFW_CMD_UNALIGNED_TEST
)
906 dev_warn(&mgp
->pdev
->dev
, "DMA %s benchmark failed: %d\n",
912 static int myri10ge_reset(struct myri10ge_priv
*mgp
)
914 struct myri10ge_cmd cmd
;
915 struct myri10ge_slice_state
*ss
;
918 #ifdef CONFIG_MYRI10GE_DCA
919 unsigned long dca_tag_off
;
922 /* try to send a reset command to the card to see if it
924 memset(&cmd
, 0, sizeof(cmd
));
925 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_RESET
, &cmd
, 0);
927 dev_err(&mgp
->pdev
->dev
, "failed reset\n");
931 (void)myri10ge_dma_test(mgp
, MXGEFW_DMA_TEST
);
933 * Use non-ndis mcp_slot (eg, 4 bytes total,
934 * no toeplitz hash value returned. Older firmware will
935 * not understand this command, but will use the correct
936 * sized mcp_slot, so we ignore error returns
938 cmd
.data0
= MXGEFW_RSS_MCP_SLOT_TYPE_MIN
;
939 (void)myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE
, &cmd
, 0);
941 /* Now exchange information about interrupts */
943 bytes
= mgp
->max_intr_slots
* sizeof(*mgp
->ss
[0].rx_done
.entry
);
944 cmd
.data0
= (u32
) bytes
;
945 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_INTRQ_SIZE
, &cmd
, 0);
948 * Even though we already know how many slices are supported
949 * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
950 * has magic side effects, and must be called after a reset.
951 * It must be called prior to calling any RSS related cmds,
952 * including assigning an interrupt queue for anything but
953 * slice 0. It must also be called *after*
954 * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
955 * the firmware to compute offsets.
958 if (mgp
->num_slices
> 1) {
960 /* ask the maximum number of slices it supports */
961 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_MAX_RSS_QUEUES
,
964 dev_err(&mgp
->pdev
->dev
,
965 "failed to get number of slices\n");
969 * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
970 * to setting up the interrupt queue DMA
973 cmd
.data0
= mgp
->num_slices
;
974 cmd
.data1
= MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE
;
975 if (mgp
->dev
->real_num_tx_queues
> 1)
976 cmd
.data1
|= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES
;
977 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_ENABLE_RSS_QUEUES
,
980 /* Firmware older than 1.4.32 only supports multiple
981 * RX queues, so if we get an error, first retry using a
982 * single TX queue before giving up */
983 if (status
!= 0 && mgp
->dev
->real_num_tx_queues
> 1) {
984 netif_set_real_num_tx_queues(mgp
->dev
, 1);
985 cmd
.data0
= mgp
->num_slices
;
986 cmd
.data1
= MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE
;
987 status
= myri10ge_send_cmd(mgp
,
988 MXGEFW_CMD_ENABLE_RSS_QUEUES
,
993 dev_err(&mgp
->pdev
->dev
,
994 "failed to set number of slices\n");
999 for (i
= 0; i
< mgp
->num_slices
; i
++) {
1001 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(ss
->rx_done
.bus
);
1002 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(ss
->rx_done
.bus
);
1004 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_INTRQ_DMA
,
1009 myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_IRQ_ACK_OFFSET
, &cmd
, 0);
1010 for (i
= 0; i
< mgp
->num_slices
; i
++) {
1013 (__iomem __be32
*) (mgp
->sram
+ cmd
.data0
+ 8 * i
);
1015 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET
,
1017 mgp
->irq_deassert
= (__iomem __be32
*) (mgp
->sram
+ cmd
.data0
);
1019 status
|= myri10ge_send_cmd
1020 (mgp
, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET
, &cmd
, 0);
1021 mgp
->intr_coal_delay_ptr
= (__iomem __be32
*) (mgp
->sram
+ cmd
.data0
);
1023 dev_err(&mgp
->pdev
->dev
, "failed set interrupt parameters\n");
1026 put_be32(htonl(mgp
->intr_coal_delay
), mgp
->intr_coal_delay_ptr
);
1028 #ifdef CONFIG_MYRI10GE_DCA
1029 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_DCA_OFFSET
, &cmd
, 0);
1030 dca_tag_off
= cmd
.data0
;
1031 for (i
= 0; i
< mgp
->num_slices
; i
++) {
1034 ss
->dca_tag
= (__iomem __be32
*)
1035 (mgp
->sram
+ dca_tag_off
+ 4 * i
);
1040 #endif /* CONFIG_MYRI10GE_DCA */
1042 /* reset mcp/driver shared state back to 0 */
1044 mgp
->link_changes
= 0;
1045 for (i
= 0; i
< mgp
->num_slices
; i
++) {
1048 memset(ss
->rx_done
.entry
, 0, bytes
);
1051 ss
->tx
.pkt_start
= 0;
1052 ss
->tx
.pkt_done
= 0;
1054 ss
->rx_small
.cnt
= 0;
1055 ss
->rx_done
.idx
= 0;
1056 ss
->rx_done
.cnt
= 0;
1057 ss
->tx
.wake_queue
= 0;
1058 ss
->tx
.stop_queue
= 0;
1061 status
= myri10ge_update_mac_address(mgp
, mgp
->dev
->dev_addr
);
1062 myri10ge_change_pause(mgp
, mgp
->pause
);
1063 myri10ge_set_multicast_list(mgp
->dev
);
1067 #ifdef CONFIG_MYRI10GE_DCA
1068 static int myri10ge_toggle_relaxed(struct pci_dev
*pdev
, int on
)
1073 pcie_capability_read_word(pdev
, PCI_EXP_DEVCTL
, &ctl
);
1075 ret
= (ctl
& PCI_EXP_DEVCTL_RELAX_EN
) >> 4;
1077 ctl
&= ~PCI_EXP_DEVCTL_RELAX_EN
;
1079 pcie_capability_write_word(pdev
, PCI_EXP_DEVCTL
, ctl
);
1085 myri10ge_write_dca(struct myri10ge_slice_state
*ss
, int cpu
, int tag
)
1087 ss
->cached_dca_tag
= tag
;
1088 put_be32(htonl(tag
), ss
->dca_tag
);
1091 static inline void myri10ge_update_dca(struct myri10ge_slice_state
*ss
)
1093 int cpu
= get_cpu();
1096 if (cpu
!= ss
->cpu
) {
1097 tag
= dca3_get_tag(&ss
->mgp
->pdev
->dev
, cpu
);
1098 if (ss
->cached_dca_tag
!= tag
)
1099 myri10ge_write_dca(ss
, cpu
, tag
);
1105 static void myri10ge_setup_dca(struct myri10ge_priv
*mgp
)
1108 struct pci_dev
*pdev
= mgp
->pdev
;
1110 if (mgp
->ss
[0].dca_tag
== NULL
|| mgp
->dca_enabled
)
1112 if (!myri10ge_dca
) {
1113 dev_err(&pdev
->dev
, "dca disabled by administrator\n");
1116 err
= dca_add_requester(&pdev
->dev
);
1120 "dca_add_requester() failed, err=%d\n", err
);
1123 mgp
->relaxed_order
= myri10ge_toggle_relaxed(pdev
, 0);
1124 mgp
->dca_enabled
= 1;
1125 for (i
= 0; i
< mgp
->num_slices
; i
++) {
1126 mgp
->ss
[i
].cpu
= -1;
1127 mgp
->ss
[i
].cached_dca_tag
= -1;
1128 myri10ge_update_dca(&mgp
->ss
[i
]);
1132 static void myri10ge_teardown_dca(struct myri10ge_priv
*mgp
)
1134 struct pci_dev
*pdev
= mgp
->pdev
;
1136 if (!mgp
->dca_enabled
)
1138 mgp
->dca_enabled
= 0;
1139 if (mgp
->relaxed_order
)
1140 myri10ge_toggle_relaxed(pdev
, 1);
1141 dca_remove_requester(&pdev
->dev
);
1144 static int myri10ge_notify_dca_device(struct device
*dev
, void *data
)
1146 struct myri10ge_priv
*mgp
;
1147 unsigned long event
;
1149 mgp
= dev_get_drvdata(dev
);
1150 event
= *(unsigned long *)data
;
1152 if (event
== DCA_PROVIDER_ADD
)
1153 myri10ge_setup_dca(mgp
);
1154 else if (event
== DCA_PROVIDER_REMOVE
)
1155 myri10ge_teardown_dca(mgp
);
1158 #endif /* CONFIG_MYRI10GE_DCA */
1161 myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem
* dst
,
1162 struct mcp_kreq_ether_recv
*src
)
1166 low
= src
->addr_low
;
1167 src
->addr_low
= htonl(DMA_BIT_MASK(32));
1168 myri10ge_pio_copy(dst
, src
, 4 * sizeof(*src
));
1170 myri10ge_pio_copy(dst
+ 4, src
+ 4, 4 * sizeof(*src
));
1172 src
->addr_low
= low
;
1173 put_be32(low
, &dst
->addr_low
);
1177 static inline void myri10ge_vlan_ip_csum(struct sk_buff
*skb
, __wsum hw_csum
)
1179 struct vlan_hdr
*vh
= (struct vlan_hdr
*)(skb
->data
);
1181 if ((skb
->protocol
== htons(ETH_P_8021Q
)) &&
1182 (vh
->h_vlan_encapsulated_proto
== htons(ETH_P_IP
) ||
1183 vh
->h_vlan_encapsulated_proto
== htons(ETH_P_IPV6
))) {
1184 skb
->csum
= hw_csum
;
1185 skb
->ip_summed
= CHECKSUM_COMPLETE
;
1190 myri10ge_alloc_rx_pages(struct myri10ge_priv
*mgp
, struct myri10ge_rx_buf
*rx
,
1191 int bytes
, int watchdog
)
1195 #if MYRI10GE_ALLOC_SIZE > 4096
1199 if (unlikely(rx
->watchdog_needed
&& !watchdog
))
1202 /* try to refill entire ring */
1203 while (rx
->fill_cnt
!= (rx
->cnt
+ rx
->mask
+ 1)) {
1204 idx
= rx
->fill_cnt
& rx
->mask
;
1205 if (rx
->page_offset
+ bytes
<= MYRI10GE_ALLOC_SIZE
) {
1206 /* we can use part of previous page */
1209 /* we need a new page */
1211 alloc_pages(GFP_ATOMIC
| __GFP_COMP
,
1212 MYRI10GE_ALLOC_ORDER
);
1213 if (unlikely(page
== NULL
)) {
1214 if (rx
->fill_cnt
- rx
->cnt
< 16)
1215 rx
->watchdog_needed
= 1;
1219 rx
->page_offset
= 0;
1220 rx
->bus
= pci_map_page(mgp
->pdev
, page
, 0,
1221 MYRI10GE_ALLOC_SIZE
,
1222 PCI_DMA_FROMDEVICE
);
1224 rx
->info
[idx
].page
= rx
->page
;
1225 rx
->info
[idx
].page_offset
= rx
->page_offset
;
1226 /* note that this is the address of the start of the
1228 dma_unmap_addr_set(&rx
->info
[idx
], bus
, rx
->bus
);
1229 rx
->shadow
[idx
].addr_low
=
1230 htonl(MYRI10GE_LOWPART_TO_U32(rx
->bus
) + rx
->page_offset
);
1231 rx
->shadow
[idx
].addr_high
=
1232 htonl(MYRI10GE_HIGHPART_TO_U32(rx
->bus
));
1234 /* start next packet on a cacheline boundary */
1235 rx
->page_offset
+= SKB_DATA_ALIGN(bytes
);
1237 #if MYRI10GE_ALLOC_SIZE > 4096
1238 /* don't cross a 4KB boundary */
1239 end_offset
= rx
->page_offset
+ bytes
- 1;
1240 if ((unsigned)(rx
->page_offset
^ end_offset
) > 4095)
1241 rx
->page_offset
= end_offset
& ~4095;
1245 /* copy 8 descriptors to the firmware at a time */
1246 if ((idx
& 7) == 7) {
1247 myri10ge_submit_8rx(&rx
->lanai
[idx
- 7],
1248 &rx
->shadow
[idx
- 7]);
1254 myri10ge_unmap_rx_page(struct pci_dev
*pdev
,
1255 struct myri10ge_rx_buffer_state
*info
, int bytes
)
1257 /* unmap the recvd page if we're the only or last user of it */
1258 if (bytes
>= MYRI10GE_ALLOC_SIZE
/ 2 ||
1259 (info
->page_offset
+ 2 * bytes
) > MYRI10GE_ALLOC_SIZE
) {
1260 pci_unmap_page(pdev
, (dma_unmap_addr(info
, bus
)
1261 & ~(MYRI10GE_ALLOC_SIZE
- 1)),
1262 MYRI10GE_ALLOC_SIZE
, PCI_DMA_FROMDEVICE
);
1267 * GRO does not support acceleration of tagged vlan frames, and
1268 * this NIC does not support vlan tag offload, so we must pop
1269 * the tag ourselves to be able to achieve GRO performance that
1270 * is comparable to LRO.
1274 myri10ge_vlan_rx(struct net_device
*dev
, void *addr
, struct sk_buff
*skb
)
1277 struct vlan_ethhdr
*veh
;
1278 struct skb_frag_struct
*frag
;
1283 veh
= (struct vlan_ethhdr
*)va
;
1284 if ((dev
->features
& NETIF_F_HW_VLAN_RX
) == NETIF_F_HW_VLAN_RX
&&
1285 veh
->h_vlan_proto
== htons(ETH_P_8021Q
)) {
1286 /* fixup csum if needed */
1287 if (skb
->ip_summed
== CHECKSUM_COMPLETE
) {
1288 vsum
= csum_partial(va
+ ETH_HLEN
, VLAN_HLEN
, 0);
1289 skb
->csum
= csum_sub(skb
->csum
, vsum
);
1292 __vlan_hwaccel_put_tag(skb
, ntohs(veh
->h_vlan_TCI
));
1293 memmove(va
+ VLAN_HLEN
, va
, 2 * ETH_ALEN
);
1294 skb
->len
-= VLAN_HLEN
;
1295 skb
->data_len
-= VLAN_HLEN
;
1296 frag
= skb_shinfo(skb
)->frags
;
1297 frag
->page_offset
+= VLAN_HLEN
;
1298 skb_frag_size_set(frag
, skb_frag_size(frag
) - VLAN_HLEN
);
1303 myri10ge_rx_done(struct myri10ge_slice_state
*ss
, int len
, __wsum csum
)
1305 struct myri10ge_priv
*mgp
= ss
->mgp
;
1306 struct sk_buff
*skb
;
1307 struct skb_frag_struct
*rx_frags
;
1308 struct myri10ge_rx_buf
*rx
;
1309 int i
, idx
, remainder
, bytes
;
1310 struct pci_dev
*pdev
= mgp
->pdev
;
1311 struct net_device
*dev
= mgp
->dev
;
1314 if (len
<= mgp
->small_bytes
) {
1316 bytes
= mgp
->small_bytes
;
1319 bytes
= mgp
->big_bytes
;
1323 idx
= rx
->cnt
& rx
->mask
;
1324 va
= page_address(rx
->info
[idx
].page
) + rx
->info
[idx
].page_offset
;
1327 skb
= napi_get_frags(&ss
->napi
);
1328 if (unlikely(skb
== NULL
)) {
1329 ss
->stats
.rx_dropped
++;
1330 for (i
= 0, remainder
= len
; remainder
> 0; i
++) {
1331 myri10ge_unmap_rx_page(pdev
, &rx
->info
[idx
], bytes
);
1332 put_page(rx
->info
[idx
].page
);
1334 idx
= rx
->cnt
& rx
->mask
;
1335 remainder
-= MYRI10GE_ALLOC_SIZE
;
1339 rx_frags
= skb_shinfo(skb
)->frags
;
1340 /* Fill skb_frag_struct(s) with data from our receive */
1341 for (i
= 0, remainder
= len
; remainder
> 0; i
++) {
1342 myri10ge_unmap_rx_page(pdev
, &rx
->info
[idx
], bytes
);
1343 skb_fill_page_desc(skb
, i
, rx
->info
[idx
].page
,
1344 rx
->info
[idx
].page_offset
,
1345 remainder
< MYRI10GE_ALLOC_SIZE
?
1346 remainder
: MYRI10GE_ALLOC_SIZE
);
1348 idx
= rx
->cnt
& rx
->mask
;
1349 remainder
-= MYRI10GE_ALLOC_SIZE
;
1352 /* remove padding */
1353 rx_frags
[0].page_offset
+= MXGEFW_PAD
;
1354 rx_frags
[0].size
-= MXGEFW_PAD
;
1358 skb
->data_len
= len
;
1359 skb
->truesize
+= len
;
1360 if (dev
->features
& NETIF_F_RXCSUM
) {
1361 skb
->ip_summed
= CHECKSUM_COMPLETE
;
1364 myri10ge_vlan_rx(mgp
->dev
, va
, skb
);
1365 skb_record_rx_queue(skb
, ss
- &mgp
->ss
[0]);
1367 napi_gro_frags(&ss
->napi
);
1372 myri10ge_tx_done(struct myri10ge_slice_state
*ss
, int mcp_index
)
1374 struct pci_dev
*pdev
= ss
->mgp
->pdev
;
1375 struct myri10ge_tx_buf
*tx
= &ss
->tx
;
1376 struct netdev_queue
*dev_queue
;
1377 struct sk_buff
*skb
;
1380 while (tx
->pkt_done
!= mcp_index
) {
1381 idx
= tx
->done
& tx
->mask
;
1382 skb
= tx
->info
[idx
].skb
;
1385 tx
->info
[idx
].skb
= NULL
;
1386 if (tx
->info
[idx
].last
) {
1388 tx
->info
[idx
].last
= 0;
1391 len
= dma_unmap_len(&tx
->info
[idx
], len
);
1392 dma_unmap_len_set(&tx
->info
[idx
], len
, 0);
1394 ss
->stats
.tx_bytes
+= skb
->len
;
1395 ss
->stats
.tx_packets
++;
1396 dev_kfree_skb_irq(skb
);
1398 pci_unmap_single(pdev
,
1399 dma_unmap_addr(&tx
->info
[idx
],
1404 pci_unmap_page(pdev
,
1405 dma_unmap_addr(&tx
->info
[idx
],
1411 dev_queue
= netdev_get_tx_queue(ss
->dev
, ss
- ss
->mgp
->ss
);
1413 * Make a minimal effort to prevent the NIC from polling an
1414 * idle tx queue. If we can't get the lock we leave the queue
1415 * active. In this case, either a thread was about to start
1416 * using the queue anyway, or we lost a race and the NIC will
1417 * waste some of its resources polling an inactive queue for a
1421 if ((ss
->mgp
->dev
->real_num_tx_queues
> 1) &&
1422 __netif_tx_trylock(dev_queue
)) {
1423 if (tx
->req
== tx
->done
) {
1424 tx
->queue_active
= 0;
1425 put_be32(htonl(1), tx
->send_stop
);
1429 __netif_tx_unlock(dev_queue
);
1432 /* start the queue if we've stopped it */
1433 if (netif_tx_queue_stopped(dev_queue
) &&
1434 tx
->req
- tx
->done
< (tx
->mask
>> 1) &&
1435 ss
->mgp
->running
== MYRI10GE_ETH_RUNNING
) {
1437 netif_tx_wake_queue(dev_queue
);
1442 myri10ge_clean_rx_done(struct myri10ge_slice_state
*ss
, int budget
)
1444 struct myri10ge_rx_done
*rx_done
= &ss
->rx_done
;
1445 struct myri10ge_priv
*mgp
= ss
->mgp
;
1446 unsigned long rx_bytes
= 0;
1447 unsigned long rx_packets
= 0;
1448 unsigned long rx_ok
;
1449 int idx
= rx_done
->idx
;
1450 int cnt
= rx_done
->cnt
;
1455 while (rx_done
->entry
[idx
].length
!= 0 && work_done
< budget
) {
1456 length
= ntohs(rx_done
->entry
[idx
].length
);
1457 rx_done
->entry
[idx
].length
= 0;
1458 checksum
= csum_unfold(rx_done
->entry
[idx
].checksum
);
1459 rx_ok
= myri10ge_rx_done(ss
, length
, checksum
);
1460 rx_packets
+= rx_ok
;
1461 rx_bytes
+= rx_ok
* (unsigned long)length
;
1463 idx
= cnt
& (mgp
->max_intr_slots
- 1);
1468 ss
->stats
.rx_packets
+= rx_packets
;
1469 ss
->stats
.rx_bytes
+= rx_bytes
;
1471 /* restock receive rings if needed */
1472 if (ss
->rx_small
.fill_cnt
- ss
->rx_small
.cnt
< myri10ge_fill_thresh
)
1473 myri10ge_alloc_rx_pages(mgp
, &ss
->rx_small
,
1474 mgp
->small_bytes
+ MXGEFW_PAD
, 0);
1475 if (ss
->rx_big
.fill_cnt
- ss
->rx_big
.cnt
< myri10ge_fill_thresh
)
1476 myri10ge_alloc_rx_pages(mgp
, &ss
->rx_big
, mgp
->big_bytes
, 0);
1481 static inline void myri10ge_check_statblock(struct myri10ge_priv
*mgp
)
1483 struct mcp_irq_data
*stats
= mgp
->ss
[0].fw_stats
;
1485 if (unlikely(stats
->stats_updated
)) {
1486 unsigned link_up
= ntohl(stats
->link_up
);
1487 if (mgp
->link_state
!= link_up
) {
1488 mgp
->link_state
= link_up
;
1490 if (mgp
->link_state
== MXGEFW_LINK_UP
) {
1491 netif_info(mgp
, link
, mgp
->dev
, "link up\n");
1492 netif_carrier_on(mgp
->dev
);
1493 mgp
->link_changes
++;
1495 netif_info(mgp
, link
, mgp
->dev
, "link %s\n",
1496 (link_up
== MXGEFW_LINK_MYRINET
?
1497 "mismatch (Myrinet detected)" :
1499 netif_carrier_off(mgp
->dev
);
1500 mgp
->link_changes
++;
1503 if (mgp
->rdma_tags_available
!=
1504 ntohl(stats
->rdma_tags_available
)) {
1505 mgp
->rdma_tags_available
=
1506 ntohl(stats
->rdma_tags_available
);
1507 netdev_warn(mgp
->dev
, "RDMA timed out! %d tags left\n",
1508 mgp
->rdma_tags_available
);
1510 mgp
->down_cnt
+= stats
->link_down
;
1511 if (stats
->link_down
)
1512 wake_up(&mgp
->down_wq
);
1516 static int myri10ge_poll(struct napi_struct
*napi
, int budget
)
1518 struct myri10ge_slice_state
*ss
=
1519 container_of(napi
, struct myri10ge_slice_state
, napi
);
1522 #ifdef CONFIG_MYRI10GE_DCA
1523 if (ss
->mgp
->dca_enabled
)
1524 myri10ge_update_dca(ss
);
1527 /* process as many rx events as NAPI will allow */
1528 work_done
= myri10ge_clean_rx_done(ss
, budget
);
1530 if (work_done
< budget
) {
1531 napi_complete(napi
);
1532 put_be32(htonl(3), ss
->irq_claim
);
1537 static irqreturn_t
myri10ge_intr(int irq
, void *arg
)
1539 struct myri10ge_slice_state
*ss
= arg
;
1540 struct myri10ge_priv
*mgp
= ss
->mgp
;
1541 struct mcp_irq_data
*stats
= ss
->fw_stats
;
1542 struct myri10ge_tx_buf
*tx
= &ss
->tx
;
1543 u32 send_done_count
;
1546 /* an interrupt on a non-zero receive-only slice is implicitly
1547 * valid since MSI-X irqs are not shared */
1548 if ((mgp
->dev
->real_num_tx_queues
== 1) && (ss
!= mgp
->ss
)) {
1549 napi_schedule(&ss
->napi
);
1553 /* make sure it is our IRQ, and that the DMA has finished */
1554 if (unlikely(!stats
->valid
))
1557 /* low bit indicates receives are present, so schedule
1558 * napi poll handler */
1559 if (stats
->valid
& 1)
1560 napi_schedule(&ss
->napi
);
1562 if (!mgp
->msi_enabled
&& !mgp
->msix_enabled
) {
1563 put_be32(0, mgp
->irq_deassert
);
1564 if (!myri10ge_deassert_wait
)
1570 /* Wait for IRQ line to go low, if using INTx */
1574 /* check for transmit completes and receives */
1575 send_done_count
= ntohl(stats
->send_done_count
);
1576 if (send_done_count
!= tx
->pkt_done
)
1577 myri10ge_tx_done(ss
, (int)send_done_count
);
1578 if (unlikely(i
> myri10ge_max_irq_loops
)) {
1579 netdev_warn(mgp
->dev
, "irq stuck?\n");
1581 schedule_work(&mgp
->watchdog_work
);
1583 if (likely(stats
->valid
== 0))
1589 /* Only slice 0 updates stats */
1591 myri10ge_check_statblock(mgp
);
1593 put_be32(htonl(3), ss
->irq_claim
+ 1);
1598 myri10ge_get_settings(struct net_device
*netdev
, struct ethtool_cmd
*cmd
)
1600 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1604 cmd
->autoneg
= AUTONEG_DISABLE
;
1605 ethtool_cmd_speed_set(cmd
, SPEED_10000
);
1606 cmd
->duplex
= DUPLEX_FULL
;
1609 * parse the product code to deterimine the interface type
1610 * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
1611 * after the 3rd dash in the driver's cached copy of the
1612 * EEPROM's product code string.
1614 ptr
= mgp
->product_code_string
;
1616 netdev_err(netdev
, "Missing product code\n");
1619 for (i
= 0; i
< 3; i
++, ptr
++) {
1620 ptr
= strchr(ptr
, '-');
1622 netdev_err(netdev
, "Invalid product code %s\n",
1623 mgp
->product_code_string
);
1629 if (*ptr
== 'R' || *ptr
== 'Q' || *ptr
== 'S') {
1630 /* We've found either an XFP, quad ribbon fiber, or SFP+ */
1631 cmd
->port
= PORT_FIBRE
;
1632 cmd
->supported
|= SUPPORTED_FIBRE
;
1633 cmd
->advertising
|= ADVERTISED_FIBRE
;
1635 cmd
->port
= PORT_OTHER
;
1637 if (*ptr
== 'R' || *ptr
== 'S')
1638 cmd
->transceiver
= XCVR_EXTERNAL
;
1640 cmd
->transceiver
= XCVR_INTERNAL
;
1646 myri10ge_get_drvinfo(struct net_device
*netdev
, struct ethtool_drvinfo
*info
)
1648 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1650 strlcpy(info
->driver
, "myri10ge", sizeof(info
->driver
));
1651 strlcpy(info
->version
, MYRI10GE_VERSION_STR
, sizeof(info
->version
));
1652 strlcpy(info
->fw_version
, mgp
->fw_version
, sizeof(info
->fw_version
));
1653 strlcpy(info
->bus_info
, pci_name(mgp
->pdev
), sizeof(info
->bus_info
));
1657 myri10ge_get_coalesce(struct net_device
*netdev
, struct ethtool_coalesce
*coal
)
1659 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1661 coal
->rx_coalesce_usecs
= mgp
->intr_coal_delay
;
1666 myri10ge_set_coalesce(struct net_device
*netdev
, struct ethtool_coalesce
*coal
)
1668 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1670 mgp
->intr_coal_delay
= coal
->rx_coalesce_usecs
;
1671 put_be32(htonl(mgp
->intr_coal_delay
), mgp
->intr_coal_delay_ptr
);
1676 myri10ge_get_pauseparam(struct net_device
*netdev
,
1677 struct ethtool_pauseparam
*pause
)
1679 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1682 pause
->rx_pause
= mgp
->pause
;
1683 pause
->tx_pause
= mgp
->pause
;
1687 myri10ge_set_pauseparam(struct net_device
*netdev
,
1688 struct ethtool_pauseparam
*pause
)
1690 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1692 if (pause
->tx_pause
!= mgp
->pause
)
1693 return myri10ge_change_pause(mgp
, pause
->tx_pause
);
1694 if (pause
->rx_pause
!= mgp
->pause
)
1695 return myri10ge_change_pause(mgp
, pause
->rx_pause
);
1696 if (pause
->autoneg
!= 0)
1702 myri10ge_get_ringparam(struct net_device
*netdev
,
1703 struct ethtool_ringparam
*ring
)
1705 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1707 ring
->rx_mini_max_pending
= mgp
->ss
[0].rx_small
.mask
+ 1;
1708 ring
->rx_max_pending
= mgp
->ss
[0].rx_big
.mask
+ 1;
1709 ring
->rx_jumbo_max_pending
= 0;
1710 ring
->tx_max_pending
= mgp
->ss
[0].tx
.mask
+ 1;
1711 ring
->rx_mini_pending
= ring
->rx_mini_max_pending
;
1712 ring
->rx_pending
= ring
->rx_max_pending
;
1713 ring
->rx_jumbo_pending
= ring
->rx_jumbo_max_pending
;
1714 ring
->tx_pending
= ring
->tx_max_pending
;
1717 static const char myri10ge_gstrings_main_stats
[][ETH_GSTRING_LEN
] = {
1718 "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1719 "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1720 "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1721 "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1722 "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1723 "tx_heartbeat_errors", "tx_window_errors",
1724 /* device-specific stats */
1725 "tx_boundary", "WC", "irq", "MSI", "MSIX",
1726 "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1727 "serial_number", "watchdog_resets",
1728 #ifdef CONFIG_MYRI10GE_DCA
1729 "dca_capable_firmware", "dca_device_present",
1731 "link_changes", "link_up", "dropped_link_overflow",
1732 "dropped_link_error_or_filtered",
1733 "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1734 "dropped_unicast_filtered", "dropped_multicast_filtered",
1735 "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1736 "dropped_no_big_buffer"
1739 static const char myri10ge_gstrings_slice_stats
[][ETH_GSTRING_LEN
] = {
1740 "----------- slice ---------",
1741 "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
1742 "rx_small_cnt", "rx_big_cnt",
1743 "wake_queue", "stop_queue", "tx_linearized",
1746 #define MYRI10GE_NET_STATS_LEN 21
1747 #define MYRI10GE_MAIN_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_main_stats)
1748 #define MYRI10GE_SLICE_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_slice_stats)
1751 myri10ge_get_strings(struct net_device
*netdev
, u32 stringset
, u8
* data
)
1753 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1756 switch (stringset
) {
1758 memcpy(data
, *myri10ge_gstrings_main_stats
,
1759 sizeof(myri10ge_gstrings_main_stats
));
1760 data
+= sizeof(myri10ge_gstrings_main_stats
);
1761 for (i
= 0; i
< mgp
->num_slices
; i
++) {
1762 memcpy(data
, *myri10ge_gstrings_slice_stats
,
1763 sizeof(myri10ge_gstrings_slice_stats
));
1764 data
+= sizeof(myri10ge_gstrings_slice_stats
);
1770 static int myri10ge_get_sset_count(struct net_device
*netdev
, int sset
)
1772 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1776 return MYRI10GE_MAIN_STATS_LEN
+
1777 mgp
->num_slices
* MYRI10GE_SLICE_STATS_LEN
;
1784 myri10ge_get_ethtool_stats(struct net_device
*netdev
,
1785 struct ethtool_stats
*stats
, u64
* data
)
1787 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1788 struct myri10ge_slice_state
*ss
;
1789 struct rtnl_link_stats64 link_stats
;
1793 /* force stats update */
1794 memset(&link_stats
, 0, sizeof(link_stats
));
1795 (void)myri10ge_get_stats(netdev
, &link_stats
);
1796 for (i
= 0; i
< MYRI10GE_NET_STATS_LEN
; i
++)
1797 data
[i
] = ((u64
*)&link_stats
)[i
];
1799 data
[i
++] = (unsigned int)mgp
->tx_boundary
;
1800 data
[i
++] = (unsigned int)mgp
->wc_enabled
;
1801 data
[i
++] = (unsigned int)mgp
->pdev
->irq
;
1802 data
[i
++] = (unsigned int)mgp
->msi_enabled
;
1803 data
[i
++] = (unsigned int)mgp
->msix_enabled
;
1804 data
[i
++] = (unsigned int)mgp
->read_dma
;
1805 data
[i
++] = (unsigned int)mgp
->write_dma
;
1806 data
[i
++] = (unsigned int)mgp
->read_write_dma
;
1807 data
[i
++] = (unsigned int)mgp
->serial_number
;
1808 data
[i
++] = (unsigned int)mgp
->watchdog_resets
;
1809 #ifdef CONFIG_MYRI10GE_DCA
1810 data
[i
++] = (unsigned int)(mgp
->ss
[0].dca_tag
!= NULL
);
1811 data
[i
++] = (unsigned int)(mgp
->dca_enabled
);
1813 data
[i
++] = (unsigned int)mgp
->link_changes
;
1815 /* firmware stats are useful only in the first slice */
1817 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->link_up
);
1818 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->dropped_link_overflow
);
1820 (unsigned int)ntohl(ss
->fw_stats
->dropped_link_error_or_filtered
);
1821 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->dropped_pause
);
1822 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->dropped_bad_phy
);
1823 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->dropped_bad_crc32
);
1824 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->dropped_unicast_filtered
);
1826 (unsigned int)ntohl(ss
->fw_stats
->dropped_multicast_filtered
);
1827 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->dropped_runt
);
1828 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->dropped_overrun
);
1829 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->dropped_no_small_buffer
);
1830 data
[i
++] = (unsigned int)ntohl(ss
->fw_stats
->dropped_no_big_buffer
);
1832 for (slice
= 0; slice
< mgp
->num_slices
; slice
++) {
1833 ss
= &mgp
->ss
[slice
];
1835 data
[i
++] = (unsigned int)ss
->tx
.pkt_start
;
1836 data
[i
++] = (unsigned int)ss
->tx
.pkt_done
;
1837 data
[i
++] = (unsigned int)ss
->tx
.req
;
1838 data
[i
++] = (unsigned int)ss
->tx
.done
;
1839 data
[i
++] = (unsigned int)ss
->rx_small
.cnt
;
1840 data
[i
++] = (unsigned int)ss
->rx_big
.cnt
;
1841 data
[i
++] = (unsigned int)ss
->tx
.wake_queue
;
1842 data
[i
++] = (unsigned int)ss
->tx
.stop_queue
;
1843 data
[i
++] = (unsigned int)ss
->tx
.linearized
;
1847 static void myri10ge_set_msglevel(struct net_device
*netdev
, u32 value
)
1849 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1850 mgp
->msg_enable
= value
;
1853 static u32
myri10ge_get_msglevel(struct net_device
*netdev
)
1855 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1856 return mgp
->msg_enable
;
1860 * Use a low-level command to change the LED behavior. Rather than
1861 * blinking (which is the normal case), when identify is used, the
1862 * yellow LED turns solid.
1864 static int myri10ge_led(struct myri10ge_priv
*mgp
, int on
)
1866 struct mcp_gen_header
*hdr
;
1867 struct device
*dev
= &mgp
->pdev
->dev
;
1868 size_t hdr_off
, pattern_off
, hdr_len
;
1869 u32 pattern
= 0xfffffffe;
1871 /* find running firmware header */
1872 hdr_off
= swab32(readl(mgp
->sram
+ MCP_HEADER_PTR_OFFSET
));
1873 if ((hdr_off
& 3) || hdr_off
+ sizeof(*hdr
) > mgp
->sram_size
) {
1874 dev_err(dev
, "Running firmware has bad header offset (%d)\n",
1878 hdr_len
= swab32(readl(mgp
->sram
+ hdr_off
+
1879 offsetof(struct mcp_gen_header
, header_length
)));
1880 pattern_off
= hdr_off
+ offsetof(struct mcp_gen_header
, led_pattern
);
1881 if (pattern_off
>= (hdr_len
+ hdr_off
)) {
1882 dev_info(dev
, "Firmware does not support LED identification\n");
1886 pattern
= swab32(readl(mgp
->sram
+ pattern_off
+ 4));
1887 writel(swab32(pattern
), mgp
->sram
+ pattern_off
);
1892 myri10ge_phys_id(struct net_device
*netdev
, enum ethtool_phys_id_state state
)
1894 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1898 case ETHTOOL_ID_ACTIVE
:
1899 rc
= myri10ge_led(mgp
, 1);
1902 case ETHTOOL_ID_INACTIVE
:
1903 rc
= myri10ge_led(mgp
, 0);
1913 static const struct ethtool_ops myri10ge_ethtool_ops
= {
1914 .get_settings
= myri10ge_get_settings
,
1915 .get_drvinfo
= myri10ge_get_drvinfo
,
1916 .get_coalesce
= myri10ge_get_coalesce
,
1917 .set_coalesce
= myri10ge_set_coalesce
,
1918 .get_pauseparam
= myri10ge_get_pauseparam
,
1919 .set_pauseparam
= myri10ge_set_pauseparam
,
1920 .get_ringparam
= myri10ge_get_ringparam
,
1921 .get_link
= ethtool_op_get_link
,
1922 .get_strings
= myri10ge_get_strings
,
1923 .get_sset_count
= myri10ge_get_sset_count
,
1924 .get_ethtool_stats
= myri10ge_get_ethtool_stats
,
1925 .set_msglevel
= myri10ge_set_msglevel
,
1926 .get_msglevel
= myri10ge_get_msglevel
,
1927 .set_phys_id
= myri10ge_phys_id
,
1930 static int myri10ge_allocate_rings(struct myri10ge_slice_state
*ss
)
1932 struct myri10ge_priv
*mgp
= ss
->mgp
;
1933 struct myri10ge_cmd cmd
;
1934 struct net_device
*dev
= mgp
->dev
;
1935 int tx_ring_size
, rx_ring_size
;
1936 int tx_ring_entries
, rx_ring_entries
;
1937 int i
, slice
, status
;
1940 /* get ring sizes */
1941 slice
= ss
- mgp
->ss
;
1943 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_SEND_RING_SIZE
, &cmd
, 0);
1944 tx_ring_size
= cmd
.data0
;
1946 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_RX_RING_SIZE
, &cmd
, 0);
1949 rx_ring_size
= cmd
.data0
;
1951 tx_ring_entries
= tx_ring_size
/ sizeof(struct mcp_kreq_ether_send
);
1952 rx_ring_entries
= rx_ring_size
/ sizeof(struct mcp_dma_addr
);
1953 ss
->tx
.mask
= tx_ring_entries
- 1;
1954 ss
->rx_small
.mask
= ss
->rx_big
.mask
= rx_ring_entries
- 1;
1958 /* allocate the host shadow rings */
1960 bytes
= 8 + (MYRI10GE_MAX_SEND_DESC_TSO
+ 4)
1961 * sizeof(*ss
->tx
.req_list
);
1962 ss
->tx
.req_bytes
= kzalloc(bytes
, GFP_KERNEL
);
1963 if (ss
->tx
.req_bytes
== NULL
)
1964 goto abort_with_nothing
;
1966 /* ensure req_list entries are aligned to 8 bytes */
1967 ss
->tx
.req_list
= (struct mcp_kreq_ether_send
*)
1968 ALIGN((unsigned long)ss
->tx
.req_bytes
, 8);
1969 ss
->tx
.queue_active
= 0;
1971 bytes
= rx_ring_entries
* sizeof(*ss
->rx_small
.shadow
);
1972 ss
->rx_small
.shadow
= kzalloc(bytes
, GFP_KERNEL
);
1973 if (ss
->rx_small
.shadow
== NULL
)
1974 goto abort_with_tx_req_bytes
;
1976 bytes
= rx_ring_entries
* sizeof(*ss
->rx_big
.shadow
);
1977 ss
->rx_big
.shadow
= kzalloc(bytes
, GFP_KERNEL
);
1978 if (ss
->rx_big
.shadow
== NULL
)
1979 goto abort_with_rx_small_shadow
;
1981 /* allocate the host info rings */
1983 bytes
= tx_ring_entries
* sizeof(*ss
->tx
.info
);
1984 ss
->tx
.info
= kzalloc(bytes
, GFP_KERNEL
);
1985 if (ss
->tx
.info
== NULL
)
1986 goto abort_with_rx_big_shadow
;
1988 bytes
= rx_ring_entries
* sizeof(*ss
->rx_small
.info
);
1989 ss
->rx_small
.info
= kzalloc(bytes
, GFP_KERNEL
);
1990 if (ss
->rx_small
.info
== NULL
)
1991 goto abort_with_tx_info
;
1993 bytes
= rx_ring_entries
* sizeof(*ss
->rx_big
.info
);
1994 ss
->rx_big
.info
= kzalloc(bytes
, GFP_KERNEL
);
1995 if (ss
->rx_big
.info
== NULL
)
1996 goto abort_with_rx_small_info
;
1998 /* Fill the receive rings */
2000 ss
->rx_small
.cnt
= 0;
2001 ss
->rx_big
.fill_cnt
= 0;
2002 ss
->rx_small
.fill_cnt
= 0;
2003 ss
->rx_small
.page_offset
= MYRI10GE_ALLOC_SIZE
;
2004 ss
->rx_big
.page_offset
= MYRI10GE_ALLOC_SIZE
;
2005 ss
->rx_small
.watchdog_needed
= 0;
2006 ss
->rx_big
.watchdog_needed
= 0;
2007 if (mgp
->small_bytes
== 0) {
2008 ss
->rx_small
.fill_cnt
= ss
->rx_small
.mask
+ 1;
2010 myri10ge_alloc_rx_pages(mgp
, &ss
->rx_small
,
2011 mgp
->small_bytes
+ MXGEFW_PAD
, 0);
2014 if (ss
->rx_small
.fill_cnt
< ss
->rx_small
.mask
+ 1) {
2015 netdev_err(dev
, "slice-%d: alloced only %d small bufs\n",
2016 slice
, ss
->rx_small
.fill_cnt
);
2017 goto abort_with_rx_small_ring
;
2020 myri10ge_alloc_rx_pages(mgp
, &ss
->rx_big
, mgp
->big_bytes
, 0);
2021 if (ss
->rx_big
.fill_cnt
< ss
->rx_big
.mask
+ 1) {
2022 netdev_err(dev
, "slice-%d: alloced only %d big bufs\n",
2023 slice
, ss
->rx_big
.fill_cnt
);
2024 goto abort_with_rx_big_ring
;
2029 abort_with_rx_big_ring
:
2030 for (i
= ss
->rx_big
.cnt
; i
< ss
->rx_big
.fill_cnt
; i
++) {
2031 int idx
= i
& ss
->rx_big
.mask
;
2032 myri10ge_unmap_rx_page(mgp
->pdev
, &ss
->rx_big
.info
[idx
],
2034 put_page(ss
->rx_big
.info
[idx
].page
);
2037 abort_with_rx_small_ring
:
2038 if (mgp
->small_bytes
== 0)
2039 ss
->rx_small
.fill_cnt
= ss
->rx_small
.cnt
;
2040 for (i
= ss
->rx_small
.cnt
; i
< ss
->rx_small
.fill_cnt
; i
++) {
2041 int idx
= i
& ss
->rx_small
.mask
;
2042 myri10ge_unmap_rx_page(mgp
->pdev
, &ss
->rx_small
.info
[idx
],
2043 mgp
->small_bytes
+ MXGEFW_PAD
);
2044 put_page(ss
->rx_small
.info
[idx
].page
);
2047 kfree(ss
->rx_big
.info
);
2049 abort_with_rx_small_info
:
2050 kfree(ss
->rx_small
.info
);
2055 abort_with_rx_big_shadow
:
2056 kfree(ss
->rx_big
.shadow
);
2058 abort_with_rx_small_shadow
:
2059 kfree(ss
->rx_small
.shadow
);
2061 abort_with_tx_req_bytes
:
2062 kfree(ss
->tx
.req_bytes
);
2063 ss
->tx
.req_bytes
= NULL
;
2064 ss
->tx
.req_list
= NULL
;
2070 static void myri10ge_free_rings(struct myri10ge_slice_state
*ss
)
2072 struct myri10ge_priv
*mgp
= ss
->mgp
;
2073 struct sk_buff
*skb
;
2074 struct myri10ge_tx_buf
*tx
;
2077 /* If not allocated, skip it */
2078 if (ss
->tx
.req_list
== NULL
)
2081 for (i
= ss
->rx_big
.cnt
; i
< ss
->rx_big
.fill_cnt
; i
++) {
2082 idx
= i
& ss
->rx_big
.mask
;
2083 if (i
== ss
->rx_big
.fill_cnt
- 1)
2084 ss
->rx_big
.info
[idx
].page_offset
= MYRI10GE_ALLOC_SIZE
;
2085 myri10ge_unmap_rx_page(mgp
->pdev
, &ss
->rx_big
.info
[idx
],
2087 put_page(ss
->rx_big
.info
[idx
].page
);
2090 if (mgp
->small_bytes
== 0)
2091 ss
->rx_small
.fill_cnt
= ss
->rx_small
.cnt
;
2092 for (i
= ss
->rx_small
.cnt
; i
< ss
->rx_small
.fill_cnt
; i
++) {
2093 idx
= i
& ss
->rx_small
.mask
;
2094 if (i
== ss
->rx_small
.fill_cnt
- 1)
2095 ss
->rx_small
.info
[idx
].page_offset
=
2096 MYRI10GE_ALLOC_SIZE
;
2097 myri10ge_unmap_rx_page(mgp
->pdev
, &ss
->rx_small
.info
[idx
],
2098 mgp
->small_bytes
+ MXGEFW_PAD
);
2099 put_page(ss
->rx_small
.info
[idx
].page
);
2102 while (tx
->done
!= tx
->req
) {
2103 idx
= tx
->done
& tx
->mask
;
2104 skb
= tx
->info
[idx
].skb
;
2107 tx
->info
[idx
].skb
= NULL
;
2109 len
= dma_unmap_len(&tx
->info
[idx
], len
);
2110 dma_unmap_len_set(&tx
->info
[idx
], len
, 0);
2112 ss
->stats
.tx_dropped
++;
2113 dev_kfree_skb_any(skb
);
2115 pci_unmap_single(mgp
->pdev
,
2116 dma_unmap_addr(&tx
->info
[idx
],
2121 pci_unmap_page(mgp
->pdev
,
2122 dma_unmap_addr(&tx
->info
[idx
],
2127 kfree(ss
->rx_big
.info
);
2129 kfree(ss
->rx_small
.info
);
2133 kfree(ss
->rx_big
.shadow
);
2135 kfree(ss
->rx_small
.shadow
);
2137 kfree(ss
->tx
.req_bytes
);
2138 ss
->tx
.req_bytes
= NULL
;
2139 ss
->tx
.req_list
= NULL
;
2142 static int myri10ge_request_irq(struct myri10ge_priv
*mgp
)
2144 struct pci_dev
*pdev
= mgp
->pdev
;
2145 struct myri10ge_slice_state
*ss
;
2146 struct net_device
*netdev
= mgp
->dev
;
2150 mgp
->msi_enabled
= 0;
2151 mgp
->msix_enabled
= 0;
2154 if (mgp
->num_slices
> 1) {
2156 pci_enable_msix(pdev
, mgp
->msix_vectors
,
2159 mgp
->msix_enabled
= 1;
2162 "Error %d setting up MSI-X\n", status
);
2166 if (mgp
->msix_enabled
== 0) {
2167 status
= pci_enable_msi(pdev
);
2170 "Error %d setting up MSI; falling back to xPIC\n",
2173 mgp
->msi_enabled
= 1;
2177 if (mgp
->msix_enabled
) {
2178 for (i
= 0; i
< mgp
->num_slices
; i
++) {
2180 snprintf(ss
->irq_desc
, sizeof(ss
->irq_desc
),
2181 "%s:slice-%d", netdev
->name
, i
);
2182 status
= request_irq(mgp
->msix_vectors
[i
].vector
,
2183 myri10ge_intr
, 0, ss
->irq_desc
,
2187 "slice %d failed to allocate IRQ\n", i
);
2190 free_irq(mgp
->msix_vectors
[i
].vector
,
2194 pci_disable_msix(pdev
);
2199 status
= request_irq(pdev
->irq
, myri10ge_intr
, IRQF_SHARED
,
2200 mgp
->dev
->name
, &mgp
->ss
[0]);
2202 dev_err(&pdev
->dev
, "failed to allocate IRQ\n");
2203 if (mgp
->msi_enabled
)
2204 pci_disable_msi(pdev
);
2210 static void myri10ge_free_irq(struct myri10ge_priv
*mgp
)
2212 struct pci_dev
*pdev
= mgp
->pdev
;
2215 if (mgp
->msix_enabled
) {
2216 for (i
= 0; i
< mgp
->num_slices
; i
++)
2217 free_irq(mgp
->msix_vectors
[i
].vector
, &mgp
->ss
[i
]);
2219 free_irq(pdev
->irq
, &mgp
->ss
[0]);
2221 if (mgp
->msi_enabled
)
2222 pci_disable_msi(pdev
);
2223 if (mgp
->msix_enabled
)
2224 pci_disable_msix(pdev
);
2227 static int myri10ge_get_txrx(struct myri10ge_priv
*mgp
, int slice
)
2229 struct myri10ge_cmd cmd
;
2230 struct myri10ge_slice_state
*ss
;
2233 ss
= &mgp
->ss
[slice
];
2235 if (slice
== 0 || (mgp
->dev
->real_num_tx_queues
> 1)) {
2237 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_SEND_OFFSET
,
2239 ss
->tx
.lanai
= (struct mcp_kreq_ether_send __iomem
*)
2240 (mgp
->sram
+ cmd
.data0
);
2243 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_SMALL_RX_OFFSET
,
2245 ss
->rx_small
.lanai
= (struct mcp_kreq_ether_recv __iomem
*)
2246 (mgp
->sram
+ cmd
.data0
);
2249 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_BIG_RX_OFFSET
, &cmd
, 0);
2250 ss
->rx_big
.lanai
= (struct mcp_kreq_ether_recv __iomem
*)
2251 (mgp
->sram
+ cmd
.data0
);
2253 ss
->tx
.send_go
= (__iomem __be32
*)
2254 (mgp
->sram
+ MXGEFW_ETH_SEND_GO
+ 64 * slice
);
2255 ss
->tx
.send_stop
= (__iomem __be32
*)
2256 (mgp
->sram
+ MXGEFW_ETH_SEND_STOP
+ 64 * slice
);
2261 static int myri10ge_set_stats(struct myri10ge_priv
*mgp
, int slice
)
2263 struct myri10ge_cmd cmd
;
2264 struct myri10ge_slice_state
*ss
;
2267 ss
= &mgp
->ss
[slice
];
2268 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(ss
->fw_stats_bus
);
2269 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(ss
->fw_stats_bus
);
2270 cmd
.data2
= sizeof(struct mcp_irq_data
) | (slice
<< 16);
2271 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_STATS_DMA_V2
, &cmd
, 0);
2272 if (status
== -ENOSYS
) {
2273 dma_addr_t bus
= ss
->fw_stats_bus
;
2276 bus
+= offsetof(struct mcp_irq_data
, send_done_count
);
2277 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(bus
);
2278 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(bus
);
2279 status
= myri10ge_send_cmd(mgp
,
2280 MXGEFW_CMD_SET_STATS_DMA_OBSOLETE
,
2282 /* Firmware cannot support multicast without STATS_DMA_V2 */
2283 mgp
->fw_multicast_support
= 0;
2285 mgp
->fw_multicast_support
= 1;
2290 static int myri10ge_open(struct net_device
*dev
)
2292 struct myri10ge_slice_state
*ss
;
2293 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2294 struct myri10ge_cmd cmd
;
2295 int i
, status
, big_pow2
, slice
;
2298 if (mgp
->running
!= MYRI10GE_ETH_STOPPED
)
2301 mgp
->running
= MYRI10GE_ETH_STARTING
;
2302 status
= myri10ge_reset(mgp
);
2304 netdev_err(dev
, "failed reset\n");
2305 goto abort_with_nothing
;
2308 if (mgp
->num_slices
> 1) {
2309 cmd
.data0
= mgp
->num_slices
;
2310 cmd
.data1
= MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE
;
2311 if (mgp
->dev
->real_num_tx_queues
> 1)
2312 cmd
.data1
|= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES
;
2313 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_ENABLE_RSS_QUEUES
,
2316 netdev_err(dev
, "failed to set number of slices\n");
2317 goto abort_with_nothing
;
2319 /* setup the indirection table */
2320 cmd
.data0
= mgp
->num_slices
;
2321 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_RSS_TABLE_SIZE
,
2324 status
|= myri10ge_send_cmd(mgp
,
2325 MXGEFW_CMD_GET_RSS_TABLE_OFFSET
,
2328 netdev_err(dev
, "failed to setup rss tables\n");
2329 goto abort_with_nothing
;
2332 /* just enable an identity mapping */
2333 itable
= mgp
->sram
+ cmd
.data0
;
2334 for (i
= 0; i
< mgp
->num_slices
; i
++)
2335 __raw_writeb(i
, &itable
[i
]);
2338 cmd
.data1
= myri10ge_rss_hash
;
2339 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_RSS_ENABLE
,
2342 netdev_err(dev
, "failed to enable slices\n");
2343 goto abort_with_nothing
;
2347 status
= myri10ge_request_irq(mgp
);
2349 goto abort_with_nothing
;
2351 /* decide what small buffer size to use. For good TCP rx
2352 * performance, it is important to not receive 1514 byte
2353 * frames into jumbo buffers, as it confuses the socket buffer
2354 * accounting code, leading to drops and erratic performance.
2357 if (dev
->mtu
<= ETH_DATA_LEN
)
2358 /* enough for a TCP header */
2359 mgp
->small_bytes
= (128 > SMP_CACHE_BYTES
)
2360 ? (128 - MXGEFW_PAD
)
2361 : (SMP_CACHE_BYTES
- MXGEFW_PAD
);
2363 /* enough for a vlan encapsulated ETH_DATA_LEN frame */
2364 mgp
->small_bytes
= VLAN_ETH_FRAME_LEN
;
2366 /* Override the small buffer size? */
2367 if (myri10ge_small_bytes
>= 0)
2368 mgp
->small_bytes
= myri10ge_small_bytes
;
2370 /* Firmware needs the big buff size as a power of 2. Lie and
2371 * tell him the buffer is larger, because we only use 1
2372 * buffer/pkt, and the mtu will prevent overruns.
2374 big_pow2
= dev
->mtu
+ ETH_HLEN
+ VLAN_HLEN
+ MXGEFW_PAD
;
2375 if (big_pow2
< MYRI10GE_ALLOC_SIZE
/ 2) {
2376 while (!is_power_of_2(big_pow2
))
2378 mgp
->big_bytes
= dev
->mtu
+ ETH_HLEN
+ VLAN_HLEN
+ MXGEFW_PAD
;
2380 big_pow2
= MYRI10GE_ALLOC_SIZE
;
2381 mgp
->big_bytes
= big_pow2
;
2384 /* setup the per-slice data structures */
2385 for (slice
= 0; slice
< mgp
->num_slices
; slice
++) {
2386 ss
= &mgp
->ss
[slice
];
2388 status
= myri10ge_get_txrx(mgp
, slice
);
2390 netdev_err(dev
, "failed to get ring sizes or locations\n");
2391 goto abort_with_rings
;
2393 status
= myri10ge_allocate_rings(ss
);
2395 goto abort_with_rings
;
2397 /* only firmware which supports multiple TX queues
2398 * supports setting up the tx stats on non-zero
2400 if (slice
== 0 || mgp
->dev
->real_num_tx_queues
> 1)
2401 status
= myri10ge_set_stats(mgp
, slice
);
2403 netdev_err(dev
, "Couldn't set stats DMA\n");
2404 goto abort_with_rings
;
2407 /* must happen prior to any irq */
2408 napi_enable(&(ss
)->napi
);
2411 /* now give firmware buffers sizes, and MTU */
2412 cmd
.data0
= dev
->mtu
+ ETH_HLEN
+ VLAN_HLEN
;
2413 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_MTU
, &cmd
, 0);
2414 cmd
.data0
= mgp
->small_bytes
;
2416 myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE
, &cmd
, 0);
2417 cmd
.data0
= big_pow2
;
2419 myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_BIG_BUFFER_SIZE
, &cmd
, 0);
2421 netdev_err(dev
, "Couldn't set buffer sizes\n");
2422 goto abort_with_rings
;
2426 * Set Linux style TSO mode; this is needed only on newer
2427 * firmware versions. Older versions default to Linux
2431 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_TSO_MODE
, &cmd
, 0);
2432 if (status
&& status
!= -ENOSYS
) {
2433 netdev_err(dev
, "Couldn't set TSO mode\n");
2434 goto abort_with_rings
;
2437 mgp
->link_state
= ~0U;
2438 mgp
->rdma_tags_available
= 15;
2440 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_ETHERNET_UP
, &cmd
, 0);
2442 netdev_err(dev
, "Couldn't bring up link\n");
2443 goto abort_with_rings
;
2446 mgp
->running
= MYRI10GE_ETH_RUNNING
;
2447 mgp
->watchdog_timer
.expires
= jiffies
+ myri10ge_watchdog_timeout
* HZ
;
2448 add_timer(&mgp
->watchdog_timer
);
2449 netif_tx_wake_all_queues(dev
);
2456 napi_disable(&mgp
->ss
[slice
].napi
);
2458 for (i
= 0; i
< mgp
->num_slices
; i
++)
2459 myri10ge_free_rings(&mgp
->ss
[i
]);
2461 myri10ge_free_irq(mgp
);
2464 mgp
->running
= MYRI10GE_ETH_STOPPED
;
2468 static int myri10ge_close(struct net_device
*dev
)
2470 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2471 struct myri10ge_cmd cmd
;
2472 int status
, old_down_cnt
;
2475 if (mgp
->running
!= MYRI10GE_ETH_RUNNING
)
2478 if (mgp
->ss
[0].tx
.req_bytes
== NULL
)
2481 del_timer_sync(&mgp
->watchdog_timer
);
2482 mgp
->running
= MYRI10GE_ETH_STOPPING
;
2483 for (i
= 0; i
< mgp
->num_slices
; i
++) {
2484 napi_disable(&mgp
->ss
[i
].napi
);
2486 netif_carrier_off(dev
);
2488 netif_tx_stop_all_queues(dev
);
2489 if (mgp
->rebooted
== 0) {
2490 old_down_cnt
= mgp
->down_cnt
;
2493 myri10ge_send_cmd(mgp
, MXGEFW_CMD_ETHERNET_DOWN
, &cmd
, 0);
2495 netdev_err(dev
, "Couldn't bring down link\n");
2497 wait_event_timeout(mgp
->down_wq
, old_down_cnt
!= mgp
->down_cnt
,
2499 if (old_down_cnt
== mgp
->down_cnt
)
2500 netdev_err(dev
, "never got down irq\n");
2502 netif_tx_disable(dev
);
2503 myri10ge_free_irq(mgp
);
2504 for (i
= 0; i
< mgp
->num_slices
; i
++)
2505 myri10ge_free_rings(&mgp
->ss
[i
]);
2507 mgp
->running
= MYRI10GE_ETH_STOPPED
;
2511 /* copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
2512 * backwards one at a time and handle ring wraps */
2515 myri10ge_submit_req_backwards(struct myri10ge_tx_buf
*tx
,
2516 struct mcp_kreq_ether_send
*src
, int cnt
)
2518 int idx
, starting_slot
;
2519 starting_slot
= tx
->req
;
2522 idx
= (starting_slot
+ cnt
) & tx
->mask
;
2523 myri10ge_pio_copy(&tx
->lanai
[idx
], &src
[cnt
], sizeof(*src
));
2529 * copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
2530 * at most 32 bytes at a time, so as to avoid involving the software
2531 * pio handler in the nic. We re-write the first segment's flags
2532 * to mark them valid only after writing the entire chain.
2536 myri10ge_submit_req(struct myri10ge_tx_buf
*tx
, struct mcp_kreq_ether_send
*src
,
2540 struct mcp_kreq_ether_send __iomem
*dstp
, *dst
;
2541 struct mcp_kreq_ether_send
*srcp
;
2544 idx
= tx
->req
& tx
->mask
;
2546 last_flags
= src
->flags
;
2549 dst
= dstp
= &tx
->lanai
[idx
];
2552 if ((idx
+ cnt
) < tx
->mask
) {
2553 for (i
= 0; i
< (cnt
- 1); i
+= 2) {
2554 myri10ge_pio_copy(dstp
, srcp
, 2 * sizeof(*src
));
2555 mb(); /* force write every 32 bytes */
2560 /* submit all but the first request, and ensure
2561 * that it is submitted below */
2562 myri10ge_submit_req_backwards(tx
, src
, cnt
);
2566 /* submit the first request */
2567 myri10ge_pio_copy(dstp
, srcp
, sizeof(*src
));
2568 mb(); /* barrier before setting valid flag */
2571 /* re-write the last 32-bits with the valid flags */
2572 src
->flags
= last_flags
;
2573 put_be32(*((__be32
*) src
+ 3), (__be32 __iomem
*) dst
+ 3);
2579 * Transmit a packet. We need to split the packet so that a single
2580 * segment does not cross myri10ge->tx_boundary, so this makes segment
2581 * counting tricky. So rather than try to count segments up front, we
2582 * just give up if there are too few segments to hold a reasonably
2583 * fragmented packet currently available. If we run
2584 * out of segments while preparing a packet for DMA, we just linearize
2588 static netdev_tx_t
myri10ge_xmit(struct sk_buff
*skb
,
2589 struct net_device
*dev
)
2591 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2592 struct myri10ge_slice_state
*ss
;
2593 struct mcp_kreq_ether_send
*req
;
2594 struct myri10ge_tx_buf
*tx
;
2595 struct skb_frag_struct
*frag
;
2596 struct netdev_queue
*netdev_queue
;
2599 __be32 high_swapped
;
2601 int idx
, last_idx
, avail
, frag_cnt
, frag_idx
, count
, mss
, max_segments
;
2602 u16 pseudo_hdr_offset
, cksum_offset
, queue
;
2603 int cum_len
, seglen
, boundary
, rdma_count
;
2606 queue
= skb_get_queue_mapping(skb
);
2607 ss
= &mgp
->ss
[queue
];
2608 netdev_queue
= netdev_get_tx_queue(mgp
->dev
, queue
);
2613 avail
= tx
->mask
- 1 - (tx
->req
- tx
->done
);
2616 max_segments
= MXGEFW_MAX_SEND_DESC
;
2618 if (skb_is_gso(skb
)) {
2619 mss
= skb_shinfo(skb
)->gso_size
;
2620 max_segments
= MYRI10GE_MAX_SEND_DESC_TSO
;
2623 if ((unlikely(avail
< max_segments
))) {
2624 /* we are out of transmit resources */
2626 netif_tx_stop_queue(netdev_queue
);
2627 return NETDEV_TX_BUSY
;
2630 /* Setup checksum offloading, if needed */
2632 pseudo_hdr_offset
= 0;
2634 flags
= (MXGEFW_FLAGS_NO_TSO
| MXGEFW_FLAGS_FIRST
);
2635 if (likely(skb
->ip_summed
== CHECKSUM_PARTIAL
)) {
2636 cksum_offset
= skb_checksum_start_offset(skb
);
2637 pseudo_hdr_offset
= cksum_offset
+ skb
->csum_offset
;
2638 /* If the headers are excessively large, then we must
2639 * fall back to a software checksum */
2640 if (unlikely(!mss
&& (cksum_offset
> 255 ||
2641 pseudo_hdr_offset
> 127))) {
2642 if (skb_checksum_help(skb
))
2645 pseudo_hdr_offset
= 0;
2647 odd_flag
= MXGEFW_FLAGS_ALIGN_ODD
;
2648 flags
|= MXGEFW_FLAGS_CKSUM
;
2654 if (mss
) { /* TSO */
2655 /* this removes any CKSUM flag from before */
2656 flags
= (MXGEFW_FLAGS_TSO_HDR
| MXGEFW_FLAGS_FIRST
);
2658 /* negative cum_len signifies to the
2659 * send loop that we are still in the
2660 * header portion of the TSO packet.
2661 * TSO header can be at most 1KB long */
2662 cum_len
= -(skb_transport_offset(skb
) + tcp_hdrlen(skb
));
2664 /* for IPv6 TSO, the checksum offset stores the
2665 * TCP header length, to save the firmware from
2666 * the need to parse the headers */
2667 if (skb_is_gso_v6(skb
)) {
2668 cksum_offset
= tcp_hdrlen(skb
);
2669 /* Can only handle headers <= max_tso6 long */
2670 if (unlikely(-cum_len
> mgp
->max_tso6
))
2671 return myri10ge_sw_tso(skb
, dev
);
2673 /* for TSO, pseudo_hdr_offset holds mss.
2674 * The firmware figures out where to put
2675 * the checksum by parsing the header. */
2676 pseudo_hdr_offset
= mss
;
2678 /* Mark small packets, and pad out tiny packets */
2679 if (skb
->len
<= MXGEFW_SEND_SMALL_SIZE
) {
2680 flags
|= MXGEFW_FLAGS_SMALL
;
2682 /* pad frames to at least ETH_ZLEN bytes */
2683 if (unlikely(skb
->len
< ETH_ZLEN
)) {
2684 if (skb_padto(skb
, ETH_ZLEN
)) {
2685 /* The packet is gone, so we must
2687 ss
->stats
.tx_dropped
+= 1;
2688 return NETDEV_TX_OK
;
2690 /* adjust the len to account for the zero pad
2691 * so that the nic can know how long it is */
2692 skb
->len
= ETH_ZLEN
;
2696 /* map the skb for DMA */
2697 len
= skb_headlen(skb
);
2698 idx
= tx
->req
& tx
->mask
;
2699 tx
->info
[idx
].skb
= skb
;
2700 bus
= pci_map_single(mgp
->pdev
, skb
->data
, len
, PCI_DMA_TODEVICE
);
2701 dma_unmap_addr_set(&tx
->info
[idx
], bus
, bus
);
2702 dma_unmap_len_set(&tx
->info
[idx
], len
, len
);
2704 frag_cnt
= skb_shinfo(skb
)->nr_frags
;
2709 /* "rdma_count" is the number of RDMAs belonging to the
2710 * current packet BEFORE the current send request. For
2711 * non-TSO packets, this is equal to "count".
2712 * For TSO packets, rdma_count needs to be reset
2713 * to 0 after a segment cut.
2715 * The rdma_count field of the send request is
2716 * the number of RDMAs of the packet starting at
2717 * that request. For TSO send requests with one ore more cuts
2718 * in the middle, this is the number of RDMAs starting
2719 * after the last cut in the request. All previous
2720 * segments before the last cut implicitly have 1 RDMA.
2722 * Since the number of RDMAs is not known beforehand,
2723 * it must be filled-in retroactively - after each
2724 * segmentation cut or at the end of the entire packet.
2728 /* Break the SKB or Fragment up into pieces which
2729 * do not cross mgp->tx_boundary */
2730 low
= MYRI10GE_LOWPART_TO_U32(bus
);
2731 high_swapped
= htonl(MYRI10GE_HIGHPART_TO_U32(bus
));
2736 if (unlikely(count
== max_segments
))
2737 goto abort_linearize
;
2740 (low
+ mgp
->tx_boundary
) & ~(mgp
->tx_boundary
- 1);
2741 seglen
= boundary
- low
;
2744 flags_next
= flags
& ~MXGEFW_FLAGS_FIRST
;
2745 cum_len_next
= cum_len
+ seglen
;
2746 if (mss
) { /* TSO */
2747 (req
- rdma_count
)->rdma_count
= rdma_count
+ 1;
2749 if (likely(cum_len
>= 0)) { /* payload */
2750 int next_is_first
, chop
;
2752 chop
= (cum_len_next
> mss
);
2753 cum_len_next
= cum_len_next
% mss
;
2754 next_is_first
= (cum_len_next
== 0);
2755 flags
|= chop
* MXGEFW_FLAGS_TSO_CHOP
;
2756 flags_next
|= next_is_first
*
2758 rdma_count
|= -(chop
| next_is_first
);
2759 rdma_count
+= chop
& ~next_is_first
;
2760 } else if (likely(cum_len_next
>= 0)) { /* header ends */
2766 small
= (mss
<= MXGEFW_SEND_SMALL_SIZE
);
2767 flags_next
= MXGEFW_FLAGS_TSO_PLD
|
2768 MXGEFW_FLAGS_FIRST
|
2769 (small
* MXGEFW_FLAGS_SMALL
);
2772 req
->addr_high
= high_swapped
;
2773 req
->addr_low
= htonl(low
);
2774 req
->pseudo_hdr_offset
= htons(pseudo_hdr_offset
);
2775 req
->pad
= 0; /* complete solid 16-byte block; does this matter? */
2776 req
->rdma_count
= 1;
2777 req
->length
= htons(seglen
);
2778 req
->cksum_offset
= cksum_offset
;
2779 req
->flags
= flags
| ((cum_len
& 1) * odd_flag
);
2783 cum_len
= cum_len_next
;
2788 if (cksum_offset
!= 0 && !(mss
&& skb_is_gso_v6(skb
))) {
2789 if (unlikely(cksum_offset
> seglen
))
2790 cksum_offset
-= seglen
;
2795 if (frag_idx
== frag_cnt
)
2798 /* map next fragment for DMA */
2799 idx
= (count
+ tx
->req
) & tx
->mask
;
2800 frag
= &skb_shinfo(skb
)->frags
[frag_idx
];
2802 len
= skb_frag_size(frag
);
2803 bus
= skb_frag_dma_map(&mgp
->pdev
->dev
, frag
, 0, len
,
2805 dma_unmap_addr_set(&tx
->info
[idx
], bus
, bus
);
2806 dma_unmap_len_set(&tx
->info
[idx
], len
, len
);
2809 (req
- rdma_count
)->rdma_count
= rdma_count
;
2813 req
->flags
|= MXGEFW_FLAGS_TSO_LAST
;
2814 } while (!(req
->flags
& (MXGEFW_FLAGS_TSO_CHOP
|
2815 MXGEFW_FLAGS_FIRST
)));
2816 idx
= ((count
- 1) + tx
->req
) & tx
->mask
;
2817 tx
->info
[idx
].last
= 1;
2818 myri10ge_submit_req(tx
, tx
->req_list
, count
);
2819 /* if using multiple tx queues, make sure NIC polls the
2821 if ((mgp
->dev
->real_num_tx_queues
> 1) && tx
->queue_active
== 0) {
2822 tx
->queue_active
= 1;
2823 put_be32(htonl(1), tx
->send_go
);
2828 if ((avail
- count
) < MXGEFW_MAX_SEND_DESC
) {
2830 netif_tx_stop_queue(netdev_queue
);
2832 return NETDEV_TX_OK
;
2835 /* Free any DMA resources we've alloced and clear out the skb
2836 * slot so as to not trip up assertions, and to avoid a
2837 * double-free if linearizing fails */
2839 last_idx
= (idx
+ 1) & tx
->mask
;
2840 idx
= tx
->req
& tx
->mask
;
2841 tx
->info
[idx
].skb
= NULL
;
2843 len
= dma_unmap_len(&tx
->info
[idx
], len
);
2845 if (tx
->info
[idx
].skb
!= NULL
)
2846 pci_unmap_single(mgp
->pdev
,
2847 dma_unmap_addr(&tx
->info
[idx
],
2851 pci_unmap_page(mgp
->pdev
,
2852 dma_unmap_addr(&tx
->info
[idx
],
2855 dma_unmap_len_set(&tx
->info
[idx
], len
, 0);
2856 tx
->info
[idx
].skb
= NULL
;
2858 idx
= (idx
+ 1) & tx
->mask
;
2859 } while (idx
!= last_idx
);
2860 if (skb_is_gso(skb
)) {
2861 netdev_err(mgp
->dev
, "TSO but wanted to linearize?!?!?\n");
2865 if (skb_linearize(skb
))
2872 dev_kfree_skb_any(skb
);
2873 ss
->stats
.tx_dropped
+= 1;
2874 return NETDEV_TX_OK
;
2878 static netdev_tx_t
myri10ge_sw_tso(struct sk_buff
*skb
,
2879 struct net_device
*dev
)
2881 struct sk_buff
*segs
, *curr
;
2882 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2883 struct myri10ge_slice_state
*ss
;
2886 segs
= skb_gso_segment(skb
, dev
->features
& ~NETIF_F_TSO6
);
2894 status
= myri10ge_xmit(curr
, dev
);
2896 dev_kfree_skb_any(curr
);
2901 dev_kfree_skb_any(segs
);
2906 dev_kfree_skb_any(skb
);
2907 return NETDEV_TX_OK
;
2910 ss
= &mgp
->ss
[skb_get_queue_mapping(skb
)];
2911 dev_kfree_skb_any(skb
);
2912 ss
->stats
.tx_dropped
+= 1;
2913 return NETDEV_TX_OK
;
2916 static struct rtnl_link_stats64
*myri10ge_get_stats(struct net_device
*dev
,
2917 struct rtnl_link_stats64
*stats
)
2919 const struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2920 const struct myri10ge_slice_netstats
*slice_stats
;
2923 for (i
= 0; i
< mgp
->num_slices
; i
++) {
2924 slice_stats
= &mgp
->ss
[i
].stats
;
2925 stats
->rx_packets
+= slice_stats
->rx_packets
;
2926 stats
->tx_packets
+= slice_stats
->tx_packets
;
2927 stats
->rx_bytes
+= slice_stats
->rx_bytes
;
2928 stats
->tx_bytes
+= slice_stats
->tx_bytes
;
2929 stats
->rx_dropped
+= slice_stats
->rx_dropped
;
2930 stats
->tx_dropped
+= slice_stats
->tx_dropped
;
2935 static void myri10ge_set_multicast_list(struct net_device
*dev
)
2937 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2938 struct myri10ge_cmd cmd
;
2939 struct netdev_hw_addr
*ha
;
2940 __be32 data
[2] = { 0, 0 };
2943 /* can be called from atomic contexts,
2944 * pass 1 to force atomicity in myri10ge_send_cmd() */
2945 myri10ge_change_promisc(mgp
, dev
->flags
& IFF_PROMISC
, 1);
2947 /* This firmware is known to not support multicast */
2948 if (!mgp
->fw_multicast_support
)
2951 /* Disable multicast filtering */
2953 err
= myri10ge_send_cmd(mgp
, MXGEFW_ENABLE_ALLMULTI
, &cmd
, 1);
2955 netdev_err(dev
, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
2960 if ((dev
->flags
& IFF_ALLMULTI
) || mgp
->adopted_rx_filter_bug
) {
2961 /* request to disable multicast filtering, so quit here */
2965 /* Flush the filters */
2967 err
= myri10ge_send_cmd(mgp
, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS
,
2970 netdev_err(dev
, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
2975 /* Walk the multicast list, and add each address */
2976 netdev_for_each_mc_addr(ha
, dev
) {
2977 memcpy(data
, &ha
->addr
, 6);
2978 cmd
.data0
= ntohl(data
[0]);
2979 cmd
.data1
= ntohl(data
[1]);
2980 err
= myri10ge_send_cmd(mgp
, MXGEFW_JOIN_MULTICAST_GROUP
,
2984 netdev_err(dev
, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
2989 /* Enable multicast filtering */
2990 err
= myri10ge_send_cmd(mgp
, MXGEFW_DISABLE_ALLMULTI
, &cmd
, 1);
2992 netdev_err(dev
, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
3003 static int myri10ge_set_mac_address(struct net_device
*dev
, void *addr
)
3005 struct sockaddr
*sa
= addr
;
3006 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
3009 if (!is_valid_ether_addr(sa
->sa_data
))
3010 return -EADDRNOTAVAIL
;
3012 status
= myri10ge_update_mac_address(mgp
, sa
->sa_data
);
3014 netdev_err(dev
, "changing mac address failed with %d\n",
3019 /* change the dev structure */
3020 memcpy(dev
->dev_addr
, sa
->sa_data
, 6);
3024 static int myri10ge_change_mtu(struct net_device
*dev
, int new_mtu
)
3026 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
3029 if ((new_mtu
< 68) || (ETH_HLEN
+ new_mtu
> MYRI10GE_MAX_ETHER_MTU
)) {
3030 netdev_err(dev
, "new mtu (%d) is not valid\n", new_mtu
);
3033 netdev_info(dev
, "changing mtu from %d to %d\n", dev
->mtu
, new_mtu
);
3035 /* if we change the mtu on an active device, we must
3036 * reset the device so the firmware sees the change */
3037 myri10ge_close(dev
);
3047 * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
3048 * Only do it if the bridge is a root port since we don't want to disturb
3049 * any other device, except if forced with myri10ge_ecrc_enable > 1.
3052 static void myri10ge_enable_ecrc(struct myri10ge_priv
*mgp
)
3054 struct pci_dev
*bridge
= mgp
->pdev
->bus
->self
;
3055 struct device
*dev
= &mgp
->pdev
->dev
;
3060 if (!myri10ge_ecrc_enable
|| !bridge
)
3063 /* check that the bridge is a root port */
3064 if (pci_pcie_type(bridge
) != PCI_EXP_TYPE_ROOT_PORT
) {
3065 if (myri10ge_ecrc_enable
> 1) {
3066 struct pci_dev
*prev_bridge
, *old_bridge
= bridge
;
3068 /* Walk the hierarchy up to the root port
3069 * where ECRC has to be enabled */
3071 prev_bridge
= bridge
;
3072 bridge
= bridge
->bus
->self
;
3073 if (!bridge
|| prev_bridge
== bridge
) {
3075 "Failed to find root port"
3076 " to force ECRC\n");
3079 } while (pci_pcie_type(bridge
) !=
3080 PCI_EXP_TYPE_ROOT_PORT
);
3083 "Forcing ECRC on non-root port %s"
3084 " (enabling on root port %s)\n",
3085 pci_name(old_bridge
), pci_name(bridge
));
3088 "Not enabling ECRC on non-root port %s\n",
3094 cap
= pci_find_ext_capability(bridge
, PCI_EXT_CAP_ID_ERR
);
3098 ret
= pci_read_config_dword(bridge
, cap
+ PCI_ERR_CAP
, &err_cap
);
3100 dev_err(dev
, "failed reading ext-conf-space of %s\n",
3102 dev_err(dev
, "\t pci=nommconf in use? "
3103 "or buggy/incomplete/absent ACPI MCFG attr?\n");
3106 if (!(err_cap
& PCI_ERR_CAP_ECRC_GENC
))
3109 err_cap
|= PCI_ERR_CAP_ECRC_GENE
;
3110 pci_write_config_dword(bridge
, cap
+ PCI_ERR_CAP
, err_cap
);
3111 dev_info(dev
, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge
));
3115 * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
3116 * when the PCI-E Completion packets are aligned on an 8-byte
3117 * boundary. Some PCI-E chip sets always align Completion packets; on
3118 * the ones that do not, the alignment can be enforced by enabling
3119 * ECRC generation (if supported).
3121 * When PCI-E Completion packets are not aligned, it is actually more
3122 * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
3124 * If the driver can neither enable ECRC nor verify that it has
3125 * already been enabled, then it must use a firmware image which works
3126 * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
3127 * should also ensure that it never gives the device a Read-DMA which is
3128 * larger than 2KB by setting the tx_boundary to 2KB. If ECRC is
3129 * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
3130 * firmware image, and set tx_boundary to 4KB.
3133 static void myri10ge_firmware_probe(struct myri10ge_priv
*mgp
)
3135 struct pci_dev
*pdev
= mgp
->pdev
;
3136 struct device
*dev
= &pdev
->dev
;
3139 mgp
->tx_boundary
= 4096;
3141 * Verify the max read request size was set to 4KB
3142 * before trying the test with 4KB.
3144 status
= pcie_get_readrq(pdev
);
3146 dev_err(dev
, "Couldn't read max read req size: %d\n", status
);
3149 if (status
!= 4096) {
3150 dev_warn(dev
, "Max Read Request size != 4096 (%d)\n", status
);
3151 mgp
->tx_boundary
= 2048;
3154 * load the optimized firmware (which assumes aligned PCIe
3155 * completions) in order to see if it works on this host.
3157 set_fw_name(mgp
, myri10ge_fw_aligned
, false);
3158 status
= myri10ge_load_firmware(mgp
, 1);
3164 * Enable ECRC if possible
3166 myri10ge_enable_ecrc(mgp
);
3169 * Run a DMA test which watches for unaligned completions and
3170 * aborts on the first one seen.
3173 status
= myri10ge_dma_test(mgp
, MXGEFW_CMD_UNALIGNED_TEST
);
3175 return; /* keep the aligned firmware */
3177 if (status
!= -E2BIG
)
3178 dev_warn(dev
, "DMA test failed: %d\n", status
);
3179 if (status
== -ENOSYS
)
3180 dev_warn(dev
, "Falling back to ethp! "
3181 "Please install up to date fw\n");
3183 /* fall back to using the unaligned firmware */
3184 mgp
->tx_boundary
= 2048;
3185 set_fw_name(mgp
, myri10ge_fw_unaligned
, false);
3188 static void myri10ge_select_firmware(struct myri10ge_priv
*mgp
)
3192 if (myri10ge_force_firmware
== 0) {
3196 pcie_capability_read_word(mgp
->pdev
, PCI_EXP_LNKSTA
, &lnk
);
3197 link_width
= (lnk
>> 4) & 0x3f;
3199 /* Check to see if Link is less than 8 or if the
3200 * upstream bridge is known to provide aligned
3202 if (link_width
< 8) {
3203 dev_info(&mgp
->pdev
->dev
, "PCIE x%d Link\n",
3205 mgp
->tx_boundary
= 4096;
3206 set_fw_name(mgp
, myri10ge_fw_aligned
, false);
3208 myri10ge_firmware_probe(mgp
);
3211 if (myri10ge_force_firmware
== 1) {
3212 dev_info(&mgp
->pdev
->dev
,
3213 "Assuming aligned completions (forced)\n");
3214 mgp
->tx_boundary
= 4096;
3215 set_fw_name(mgp
, myri10ge_fw_aligned
, false);
3217 dev_info(&mgp
->pdev
->dev
,
3218 "Assuming unaligned completions (forced)\n");
3219 mgp
->tx_boundary
= 2048;
3220 set_fw_name(mgp
, myri10ge_fw_unaligned
, false);
3224 kparam_block_sysfs_write(myri10ge_fw_name
);
3225 if (myri10ge_fw_name
!= NULL
) {
3226 char *fw_name
= kstrdup(myri10ge_fw_name
, GFP_KERNEL
);
3229 set_fw_name(mgp
, fw_name
, true);
3232 kparam_unblock_sysfs_write(myri10ge_fw_name
);
3234 if (mgp
->board_number
< MYRI10GE_MAX_BOARDS
&&
3235 myri10ge_fw_names
[mgp
->board_number
] != NULL
&&
3236 strlen(myri10ge_fw_names
[mgp
->board_number
])) {
3237 set_fw_name(mgp
, myri10ge_fw_names
[mgp
->board_number
], false);
3241 dev_info(&mgp
->pdev
->dev
, "overriding firmware to %s\n",
3245 static void myri10ge_mask_surprise_down(struct pci_dev
*pdev
)
3247 struct pci_dev
*bridge
= pdev
->bus
->self
;
3254 cap
= pci_find_ext_capability(bridge
, PCI_EXT_CAP_ID_ERR
);
3256 /* a sram parity error can cause a surprise link
3257 * down; since we expect and can recover from sram
3258 * parity errors, mask surprise link down events */
3259 pci_read_config_dword(bridge
, cap
+ PCI_ERR_UNCOR_MASK
, &mask
);
3261 pci_write_config_dword(bridge
, cap
+ PCI_ERR_UNCOR_MASK
, mask
);
3266 static int myri10ge_suspend(struct pci_dev
*pdev
, pm_message_t state
)
3268 struct myri10ge_priv
*mgp
;
3269 struct net_device
*netdev
;
3271 mgp
= pci_get_drvdata(pdev
);
3276 netif_device_detach(netdev
);
3277 if (netif_running(netdev
)) {
3278 netdev_info(netdev
, "closing\n");
3280 myri10ge_close(netdev
);
3283 myri10ge_dummy_rdma(mgp
, 0);
3284 pci_save_state(pdev
);
3285 pci_disable_device(pdev
);
3287 return pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
3290 static int myri10ge_resume(struct pci_dev
*pdev
)
3292 struct myri10ge_priv
*mgp
;
3293 struct net_device
*netdev
;
3297 mgp
= pci_get_drvdata(pdev
);
3301 pci_set_power_state(pdev
, 0); /* zeros conf space as a side effect */
3302 msleep(5); /* give card time to respond */
3303 pci_read_config_word(mgp
->pdev
, PCI_VENDOR_ID
, &vendor
);
3304 if (vendor
== 0xffff) {
3305 netdev_err(mgp
->dev
, "device disappeared!\n");
3309 pci_restore_state(pdev
);
3311 status
= pci_enable_device(pdev
);
3313 dev_err(&pdev
->dev
, "failed to enable device\n");
3317 pci_set_master(pdev
);
3319 myri10ge_reset(mgp
);
3320 myri10ge_dummy_rdma(mgp
, 1);
3322 /* Save configuration space to be restored if the
3323 * nic resets due to a parity error */
3324 pci_save_state(pdev
);
3326 if (netif_running(netdev
)) {
3328 status
= myri10ge_open(netdev
);
3331 goto abort_with_enabled
;
3334 netif_device_attach(netdev
);
3339 pci_disable_device(pdev
);
3343 #endif /* CONFIG_PM */
3345 static u32
myri10ge_read_reboot(struct myri10ge_priv
*mgp
)
3347 struct pci_dev
*pdev
= mgp
->pdev
;
3348 int vs
= mgp
->vendor_specific_offset
;
3351 /*enter read32 mode */
3352 pci_write_config_byte(pdev
, vs
+ 0x10, 0x3);
3354 /*read REBOOT_STATUS (0xfffffff0) */
3355 pci_write_config_dword(pdev
, vs
+ 0x18, 0xfffffff0);
3356 pci_read_config_dword(pdev
, vs
+ 0x14, &reboot
);
3361 myri10ge_check_slice(struct myri10ge_slice_state
*ss
, int *reset_needed
,
3362 int *busy_slice_cnt
, u32 rx_pause_cnt
)
3364 struct myri10ge_priv
*mgp
= ss
->mgp
;
3365 int slice
= ss
- mgp
->ss
;
3367 if (ss
->tx
.req
!= ss
->tx
.done
&&
3368 ss
->tx
.done
== ss
->watchdog_tx_done
&&
3369 ss
->watchdog_tx_req
!= ss
->watchdog_tx_done
) {
3370 /* nic seems like it might be stuck.. */
3371 if (rx_pause_cnt
!= mgp
->watchdog_pause
) {
3372 if (net_ratelimit())
3373 netdev_warn(mgp
->dev
, "slice %d: TX paused, "
3374 "check link partner\n", slice
);
3376 netdev_warn(mgp
->dev
,
3377 "slice %d: TX stuck %d %d %d %d %d %d\n",
3378 slice
, ss
->tx
.queue_active
, ss
->tx
.req
,
3379 ss
->tx
.done
, ss
->tx
.pkt_start
,
3381 (int)ntohl(mgp
->ss
[slice
].fw_stats
->
3387 if (ss
->watchdog_tx_done
!= ss
->tx
.done
||
3388 ss
->watchdog_rx_done
!= ss
->rx_done
.cnt
) {
3389 *busy_slice_cnt
+= 1;
3391 ss
->watchdog_tx_done
= ss
->tx
.done
;
3392 ss
->watchdog_tx_req
= ss
->tx
.req
;
3393 ss
->watchdog_rx_done
= ss
->rx_done
.cnt
;
3397 * This watchdog is used to check whether the board has suffered
3398 * from a parity error and needs to be recovered.
3400 static void myri10ge_watchdog(struct work_struct
*work
)
3402 struct myri10ge_priv
*mgp
=
3403 container_of(work
, struct myri10ge_priv
, watchdog_work
);
3404 struct myri10ge_slice_state
*ss
;
3405 u32 reboot
, rx_pause_cnt
;
3406 int status
, rebooted
;
3408 int reset_needed
= 0;
3409 int busy_slice_cnt
= 0;
3412 mgp
->watchdog_resets
++;
3413 pci_read_config_word(mgp
->pdev
, PCI_COMMAND
, &cmd
);
3415 if ((cmd
& PCI_COMMAND_MASTER
) == 0) {
3416 /* Bus master DMA disabled? Check to see
3417 * if the card rebooted due to a parity error
3418 * For now, just report it */
3419 reboot
= myri10ge_read_reboot(mgp
);
3420 netdev_err(mgp
->dev
, "NIC rebooted (0x%x),%s resetting\n",
3421 reboot
, myri10ge_reset_recover
? "" : " not");
3422 if (myri10ge_reset_recover
== 0)
3427 myri10ge_close(mgp
->dev
);
3428 myri10ge_reset_recover
--;
3431 * A rebooted nic will come back with config space as
3432 * it was after power was applied to PCIe bus.
3433 * Attempt to restore config space which was saved
3434 * when the driver was loaded, or the last time the
3435 * nic was resumed from power saving mode.
3437 pci_restore_state(mgp
->pdev
);
3439 /* save state again for accounting reasons */
3440 pci_save_state(mgp
->pdev
);
3443 /* if we get back -1's from our slot, perhaps somebody
3444 * powered off our card. Don't try to reset it in
3446 if (cmd
== 0xffff) {
3447 pci_read_config_word(mgp
->pdev
, PCI_VENDOR_ID
, &vendor
);
3448 if (vendor
== 0xffff) {
3449 netdev_err(mgp
->dev
, "device disappeared!\n");
3453 /* Perhaps it is a software error. See if stuck slice
3454 * has recovered, reset if not */
3455 rx_pause_cnt
= ntohl(mgp
->ss
[0].fw_stats
->dropped_pause
);
3456 for (i
= 0; i
< mgp
->num_slices
; i
++) {
3459 myri10ge_check_slice(ss
, &reset_needed
,
3465 if (!reset_needed
) {
3466 netdev_dbg(mgp
->dev
, "not resetting\n");
3470 netdev_err(mgp
->dev
, "device timeout, resetting\n");
3475 myri10ge_close(mgp
->dev
);
3477 status
= myri10ge_load_firmware(mgp
, 1);
3479 netdev_err(mgp
->dev
, "failed to load firmware\n");
3481 myri10ge_open(mgp
->dev
);
3486 * We use our own timer routine rather than relying upon
3487 * netdev->tx_timeout because we have a very large hardware transmit
3488 * queue. Due to the large queue, the netdev->tx_timeout function
3489 * cannot detect a NIC with a parity error in a timely fashion if the
3490 * NIC is lightly loaded.
3492 static void myri10ge_watchdog_timer(unsigned long arg
)
3494 struct myri10ge_priv
*mgp
;
3495 struct myri10ge_slice_state
*ss
;
3496 int i
, reset_needed
, busy_slice_cnt
;
3500 mgp
= (struct myri10ge_priv
*)arg
;
3502 rx_pause_cnt
= ntohl(mgp
->ss
[0].fw_stats
->dropped_pause
);
3504 for (i
= 0, reset_needed
= 0;
3505 i
< mgp
->num_slices
&& reset_needed
== 0; ++i
) {
3508 if (ss
->rx_small
.watchdog_needed
) {
3509 myri10ge_alloc_rx_pages(mgp
, &ss
->rx_small
,
3510 mgp
->small_bytes
+ MXGEFW_PAD
,
3512 if (ss
->rx_small
.fill_cnt
- ss
->rx_small
.cnt
>=
3513 myri10ge_fill_thresh
)
3514 ss
->rx_small
.watchdog_needed
= 0;
3516 if (ss
->rx_big
.watchdog_needed
) {
3517 myri10ge_alloc_rx_pages(mgp
, &ss
->rx_big
,
3519 if (ss
->rx_big
.fill_cnt
- ss
->rx_big
.cnt
>=
3520 myri10ge_fill_thresh
)
3521 ss
->rx_big
.watchdog_needed
= 0;
3523 myri10ge_check_slice(ss
, &reset_needed
, &busy_slice_cnt
,
3526 /* if we've sent or received no traffic, poll the NIC to
3527 * ensure it is still there. Otherwise, we risk not noticing
3528 * an error in a timely fashion */
3529 if (busy_slice_cnt
== 0) {
3530 pci_read_config_word(mgp
->pdev
, PCI_COMMAND
, &cmd
);
3531 if ((cmd
& PCI_COMMAND_MASTER
) == 0) {
3535 mgp
->watchdog_pause
= rx_pause_cnt
;
3538 schedule_work(&mgp
->watchdog_work
);
3541 mod_timer(&mgp
->watchdog_timer
,
3542 jiffies
+ myri10ge_watchdog_timeout
* HZ
);
3546 static void myri10ge_free_slices(struct myri10ge_priv
*mgp
)
3548 struct myri10ge_slice_state
*ss
;
3549 struct pci_dev
*pdev
= mgp
->pdev
;
3553 if (mgp
->ss
== NULL
)
3556 for (i
= 0; i
< mgp
->num_slices
; i
++) {
3558 if (ss
->rx_done
.entry
!= NULL
) {
3559 bytes
= mgp
->max_intr_slots
*
3560 sizeof(*ss
->rx_done
.entry
);
3561 dma_free_coherent(&pdev
->dev
, bytes
,
3562 ss
->rx_done
.entry
, ss
->rx_done
.bus
);
3563 ss
->rx_done
.entry
= NULL
;
3565 if (ss
->fw_stats
!= NULL
) {
3566 bytes
= sizeof(*ss
->fw_stats
);
3567 dma_free_coherent(&pdev
->dev
, bytes
,
3568 ss
->fw_stats
, ss
->fw_stats_bus
);
3569 ss
->fw_stats
= NULL
;
3571 netif_napi_del(&ss
->napi
);
3577 static int myri10ge_alloc_slices(struct myri10ge_priv
*mgp
)
3579 struct myri10ge_slice_state
*ss
;
3580 struct pci_dev
*pdev
= mgp
->pdev
;
3584 bytes
= sizeof(*mgp
->ss
) * mgp
->num_slices
;
3585 mgp
->ss
= kzalloc(bytes
, GFP_KERNEL
);
3586 if (mgp
->ss
== NULL
) {
3590 for (i
= 0; i
< mgp
->num_slices
; i
++) {
3592 bytes
= mgp
->max_intr_slots
* sizeof(*ss
->rx_done
.entry
);
3593 ss
->rx_done
.entry
= dma_alloc_coherent(&pdev
->dev
, bytes
,
3596 if (ss
->rx_done
.entry
== NULL
)
3598 memset(ss
->rx_done
.entry
, 0, bytes
);
3599 bytes
= sizeof(*ss
->fw_stats
);
3600 ss
->fw_stats
= dma_alloc_coherent(&pdev
->dev
, bytes
,
3603 if (ss
->fw_stats
== NULL
)
3607 netif_napi_add(ss
->dev
, &ss
->napi
, myri10ge_poll
,
3608 myri10ge_napi_weight
);
3612 myri10ge_free_slices(mgp
);
3617 * This function determines the number of slices supported.
3618 * The number slices is the minimum of the number of CPUS,
3619 * the number of MSI-X irqs supported, the number of slices
3620 * supported by the firmware
3622 static void myri10ge_probe_slices(struct myri10ge_priv
*mgp
)
3624 struct myri10ge_cmd cmd
;
3625 struct pci_dev
*pdev
= mgp
->pdev
;
3628 int i
, status
, ncpus
, msix_cap
;
3630 mgp
->num_slices
= 1;
3631 msix_cap
= pci_find_capability(pdev
, PCI_CAP_ID_MSIX
);
3632 ncpus
= netif_get_num_default_rss_queues();
3634 if (myri10ge_max_slices
== 1 || msix_cap
== 0 ||
3635 (myri10ge_max_slices
== -1 && ncpus
< 2))
3638 /* try to load the slice aware rss firmware */
3639 old_fw
= mgp
->fw_name
;
3640 old_allocated
= mgp
->fw_name_allocated
;
3641 /* don't free old_fw if we override it. */
3642 mgp
->fw_name_allocated
= false;
3644 if (myri10ge_fw_name
!= NULL
) {
3645 dev_info(&mgp
->pdev
->dev
, "overriding rss firmware to %s\n",
3647 set_fw_name(mgp
, myri10ge_fw_name
, false);
3648 } else if (old_fw
== myri10ge_fw_aligned
)
3649 set_fw_name(mgp
, myri10ge_fw_rss_aligned
, false);
3651 set_fw_name(mgp
, myri10ge_fw_rss_unaligned
, false);
3652 status
= myri10ge_load_firmware(mgp
, 0);
3654 dev_info(&pdev
->dev
, "Rss firmware not found\n");
3660 /* hit the board with a reset to ensure it is alive */
3661 memset(&cmd
, 0, sizeof(cmd
));
3662 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_RESET
, &cmd
, 0);
3664 dev_err(&mgp
->pdev
->dev
, "failed reset\n");
3668 mgp
->max_intr_slots
= cmd
.data0
/ sizeof(struct mcp_slot
);
3670 /* tell it the size of the interrupt queues */
3671 cmd
.data0
= mgp
->max_intr_slots
* sizeof(struct mcp_slot
);
3672 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_INTRQ_SIZE
, &cmd
, 0);
3674 dev_err(&mgp
->pdev
->dev
, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
3678 /* ask the maximum number of slices it supports */
3679 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_MAX_RSS_QUEUES
, &cmd
, 0);
3683 mgp
->num_slices
= cmd
.data0
;
3685 /* Only allow multiple slices if MSI-X is usable */
3686 if (!myri10ge_msi
) {
3690 /* if the admin did not specify a limit to how many
3691 * slices we should use, cap it automatically to the
3692 * number of CPUs currently online */
3693 if (myri10ge_max_slices
== -1)
3694 myri10ge_max_slices
= ncpus
;
3696 if (mgp
->num_slices
> myri10ge_max_slices
)
3697 mgp
->num_slices
= myri10ge_max_slices
;
3699 /* Now try to allocate as many MSI-X vectors as we have
3700 * slices. We give up on MSI-X if we can only get a single
3703 mgp
->msix_vectors
= kcalloc(mgp
->num_slices
, sizeof(*mgp
->msix_vectors
),
3705 if (mgp
->msix_vectors
== NULL
)
3707 for (i
= 0; i
< mgp
->num_slices
; i
++) {
3708 mgp
->msix_vectors
[i
].entry
= i
;
3711 while (mgp
->num_slices
> 1) {
3712 /* make sure it is a power of two */
3713 while (!is_power_of_2(mgp
->num_slices
))
3715 if (mgp
->num_slices
== 1)
3717 status
= pci_enable_msix(pdev
, mgp
->msix_vectors
,
3720 pci_disable_msix(pdev
);
3726 mgp
->num_slices
= status
;
3732 if (mgp
->msix_vectors
!= NULL
) {
3733 kfree(mgp
->msix_vectors
);
3734 mgp
->msix_vectors
= NULL
;
3738 mgp
->num_slices
= 1;
3739 set_fw_name(mgp
, old_fw
, old_allocated
);
3740 myri10ge_load_firmware(mgp
, 0);
3743 static const struct net_device_ops myri10ge_netdev_ops
= {
3744 .ndo_open
= myri10ge_open
,
3745 .ndo_stop
= myri10ge_close
,
3746 .ndo_start_xmit
= myri10ge_xmit
,
3747 .ndo_get_stats64
= myri10ge_get_stats
,
3748 .ndo_validate_addr
= eth_validate_addr
,
3749 .ndo_change_mtu
= myri10ge_change_mtu
,
3750 .ndo_set_rx_mode
= myri10ge_set_multicast_list
,
3751 .ndo_set_mac_address
= myri10ge_set_mac_address
,
3754 static int myri10ge_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
3756 struct net_device
*netdev
;
3757 struct myri10ge_priv
*mgp
;
3758 struct device
*dev
= &pdev
->dev
;
3760 int status
= -ENXIO
;
3762 unsigned hdr_offset
, ss_offset
;
3763 static int board_number
;
3765 netdev
= alloc_etherdev_mq(sizeof(*mgp
), MYRI10GE_MAX_SLICES
);
3769 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
3771 mgp
= netdev_priv(netdev
);
3774 mgp
->pause
= myri10ge_flow_control
;
3775 mgp
->intr_coal_delay
= myri10ge_intr_coal_delay
;
3776 mgp
->msg_enable
= netif_msg_init(myri10ge_debug
, MYRI10GE_MSG_DEFAULT
);
3777 mgp
->board_number
= board_number
;
3778 init_waitqueue_head(&mgp
->down_wq
);
3780 if (pci_enable_device(pdev
)) {
3781 dev_err(&pdev
->dev
, "pci_enable_device call failed\n");
3783 goto abort_with_netdev
;
3786 /* Find the vendor-specific cap so we can check
3787 * the reboot register later on */
3788 mgp
->vendor_specific_offset
3789 = pci_find_capability(pdev
, PCI_CAP_ID_VNDR
);
3791 /* Set our max read request to 4KB */
3792 status
= pcie_set_readrq(pdev
, 4096);
3794 dev_err(&pdev
->dev
, "Error %d writing PCI_EXP_DEVCTL\n",
3796 goto abort_with_enabled
;
3799 myri10ge_mask_surprise_down(pdev
);
3800 pci_set_master(pdev
);
3802 status
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(64));
3806 "64-bit pci address mask was refused, "
3808 status
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
3811 dev_err(&pdev
->dev
, "Error %d setting DMA mask\n", status
);
3812 goto abort_with_enabled
;
3814 (void)pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(64));
3815 mgp
->cmd
= dma_alloc_coherent(&pdev
->dev
, sizeof(*mgp
->cmd
),
3816 &mgp
->cmd_bus
, GFP_KERNEL
);
3817 if (mgp
->cmd
== NULL
)
3818 goto abort_with_enabled
;
3820 mgp
->board_span
= pci_resource_len(pdev
, 0);
3821 mgp
->iomem_base
= pci_resource_start(pdev
, 0);
3823 mgp
->wc_enabled
= 0;
3825 mgp
->mtrr
= mtrr_add(mgp
->iomem_base
, mgp
->board_span
,
3826 MTRR_TYPE_WRCOMB
, 1);
3828 mgp
->wc_enabled
= 1;
3830 mgp
->sram
= ioremap_wc(mgp
->iomem_base
, mgp
->board_span
);
3831 if (mgp
->sram
== NULL
) {
3832 dev_err(&pdev
->dev
, "ioremap failed for %ld bytes at 0x%lx\n",
3833 mgp
->board_span
, mgp
->iomem_base
);
3835 goto abort_with_mtrr
;
3838 swab32(readl(mgp
->sram
+ MCP_HEADER_PTR_OFFSET
)) & 0xffffc;
3839 ss_offset
= hdr_offset
+ offsetof(struct mcp_gen_header
, string_specs
);
3840 mgp
->sram_size
= swab32(readl(mgp
->sram
+ ss_offset
));
3841 if (mgp
->sram_size
> mgp
->board_span
||
3842 mgp
->sram_size
<= MYRI10GE_FW_OFFSET
) {
3844 "invalid sram_size %dB or board span %ldB\n",
3845 mgp
->sram_size
, mgp
->board_span
);
3846 goto abort_with_ioremap
;
3848 memcpy_fromio(mgp
->eeprom_strings
,
3849 mgp
->sram
+ mgp
->sram_size
, MYRI10GE_EEPROM_STRINGS_SIZE
);
3850 memset(mgp
->eeprom_strings
+ MYRI10GE_EEPROM_STRINGS_SIZE
- 2, 0, 2);
3851 status
= myri10ge_read_mac_addr(mgp
);
3853 goto abort_with_ioremap
;
3855 for (i
= 0; i
< ETH_ALEN
; i
++)
3856 netdev
->dev_addr
[i
] = mgp
->mac_addr
[i
];
3858 myri10ge_select_firmware(mgp
);
3860 status
= myri10ge_load_firmware(mgp
, 1);
3862 dev_err(&pdev
->dev
, "failed to load firmware\n");
3863 goto abort_with_ioremap
;
3865 myri10ge_probe_slices(mgp
);
3866 status
= myri10ge_alloc_slices(mgp
);
3868 dev_err(&pdev
->dev
, "failed to alloc slice state\n");
3869 goto abort_with_firmware
;
3871 netif_set_real_num_tx_queues(netdev
, mgp
->num_slices
);
3872 netif_set_real_num_rx_queues(netdev
, mgp
->num_slices
);
3873 status
= myri10ge_reset(mgp
);
3875 dev_err(&pdev
->dev
, "failed reset\n");
3876 goto abort_with_slices
;
3878 #ifdef CONFIG_MYRI10GE_DCA
3879 myri10ge_setup_dca(mgp
);
3881 pci_set_drvdata(pdev
, mgp
);
3882 if ((myri10ge_initial_mtu
+ ETH_HLEN
) > MYRI10GE_MAX_ETHER_MTU
)
3883 myri10ge_initial_mtu
= MYRI10GE_MAX_ETHER_MTU
- ETH_HLEN
;
3884 if ((myri10ge_initial_mtu
+ ETH_HLEN
) < 68)
3885 myri10ge_initial_mtu
= 68;
3887 netdev
->netdev_ops
= &myri10ge_netdev_ops
;
3888 netdev
->mtu
= myri10ge_initial_mtu
;
3889 netdev
->hw_features
= mgp
->features
| NETIF_F_RXCSUM
;
3891 /* fake NETIF_F_HW_VLAN_RX for good GRO performance */
3892 netdev
->hw_features
|= NETIF_F_HW_VLAN_RX
;
3894 netdev
->features
= netdev
->hw_features
;
3897 netdev
->features
|= NETIF_F_HIGHDMA
;
3899 netdev
->vlan_features
|= mgp
->features
;
3900 if (mgp
->fw_ver_tiny
< 37)
3901 netdev
->vlan_features
&= ~NETIF_F_TSO6
;
3902 if (mgp
->fw_ver_tiny
< 32)
3903 netdev
->vlan_features
&= ~NETIF_F_TSO
;
3905 /* make sure we can get an irq, and that MSI can be
3906 * setup (if available). */
3907 status
= myri10ge_request_irq(mgp
);
3909 goto abort_with_firmware
;
3910 myri10ge_free_irq(mgp
);
3912 /* Save configuration space to be restored if the
3913 * nic resets due to a parity error */
3914 pci_save_state(pdev
);
3916 /* Setup the watchdog timer */
3917 setup_timer(&mgp
->watchdog_timer
, myri10ge_watchdog_timer
,
3918 (unsigned long)mgp
);
3920 SET_ETHTOOL_OPS(netdev
, &myri10ge_ethtool_ops
);
3921 INIT_WORK(&mgp
->watchdog_work
, myri10ge_watchdog
);
3922 status
= register_netdev(netdev
);
3924 dev_err(&pdev
->dev
, "register_netdev failed: %d\n", status
);
3925 goto abort_with_state
;
3927 if (mgp
->msix_enabled
)
3928 dev_info(dev
, "%d MSI-X IRQs, tx bndry %d, fw %s, WC %s\n",
3929 mgp
->num_slices
, mgp
->tx_boundary
, mgp
->fw_name
,
3930 (mgp
->wc_enabled
? "Enabled" : "Disabled"));
3932 dev_info(dev
, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
3933 mgp
->msi_enabled
? "MSI" : "xPIC",
3934 pdev
->irq
, mgp
->tx_boundary
, mgp
->fw_name
,
3935 (mgp
->wc_enabled
? "Enabled" : "Disabled"));
3941 pci_restore_state(pdev
);
3944 myri10ge_free_slices(mgp
);
3946 abort_with_firmware
:
3947 myri10ge_dummy_rdma(mgp
, 0);
3950 if (mgp
->mac_addr_string
!= NULL
)
3952 "myri10ge_probe() failed: MAC=%s, SN=%ld\n",
3953 mgp
->mac_addr_string
, mgp
->serial_number
);
3959 mtrr_del(mgp
->mtrr
, mgp
->iomem_base
, mgp
->board_span
);
3961 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->cmd
),
3962 mgp
->cmd
, mgp
->cmd_bus
);
3965 pci_disable_device(pdev
);
3968 set_fw_name(mgp
, NULL
, false);
3969 free_netdev(netdev
);
3976 * Does what is necessary to shutdown one Myrinet device. Called
3977 * once for each Myrinet card by the kernel when a module is
3980 static void myri10ge_remove(struct pci_dev
*pdev
)
3982 struct myri10ge_priv
*mgp
;
3983 struct net_device
*netdev
;
3985 mgp
= pci_get_drvdata(pdev
);
3989 cancel_work_sync(&mgp
->watchdog_work
);
3991 unregister_netdev(netdev
);
3993 #ifdef CONFIG_MYRI10GE_DCA
3994 myri10ge_teardown_dca(mgp
);
3996 myri10ge_dummy_rdma(mgp
, 0);
3998 /* avoid a memory leak */
3999 pci_restore_state(pdev
);
4005 mtrr_del(mgp
->mtrr
, mgp
->iomem_base
, mgp
->board_span
);
4007 myri10ge_free_slices(mgp
);
4008 if (mgp
->msix_vectors
!= NULL
)
4009 kfree(mgp
->msix_vectors
);
4010 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->cmd
),
4011 mgp
->cmd
, mgp
->cmd_bus
);
4013 set_fw_name(mgp
, NULL
, false);
4014 free_netdev(netdev
);
4015 pci_disable_device(pdev
);
4016 pci_set_drvdata(pdev
, NULL
);
4019 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
4020 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009
4022 static DEFINE_PCI_DEVICE_TABLE(myri10ge_pci_tbl
) = {
4023 {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM
, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E
)},
4025 (PCI_VENDOR_ID_MYRICOM
, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9
)},
4029 MODULE_DEVICE_TABLE(pci
, myri10ge_pci_tbl
);
4031 static struct pci_driver myri10ge_driver
= {
4033 .probe
= myri10ge_probe
,
4034 .remove
= myri10ge_remove
,
4035 .id_table
= myri10ge_pci_tbl
,
4037 .suspend
= myri10ge_suspend
,
4038 .resume
= myri10ge_resume
,
4042 #ifdef CONFIG_MYRI10GE_DCA
4044 myri10ge_notify_dca(struct notifier_block
*nb
, unsigned long event
, void *p
)
4046 int err
= driver_for_each_device(&myri10ge_driver
.driver
,
4048 myri10ge_notify_dca_device
);
4055 static struct notifier_block myri10ge_dca_notifier
= {
4056 .notifier_call
= myri10ge_notify_dca
,
4060 #endif /* CONFIG_MYRI10GE_DCA */
4062 static __init
int myri10ge_init_module(void)
4064 pr_info("Version %s\n", MYRI10GE_VERSION_STR
);
4066 if (myri10ge_rss_hash
> MXGEFW_RSS_HASH_TYPE_MAX
) {
4067 pr_err("Illegal rssh hash type %d, defaulting to source port\n",
4069 myri10ge_rss_hash
= MXGEFW_RSS_HASH_TYPE_SRC_PORT
;
4071 #ifdef CONFIG_MYRI10GE_DCA
4072 dca_register_notify(&myri10ge_dca_notifier
);
4074 if (myri10ge_max_slices
> MYRI10GE_MAX_SLICES
)
4075 myri10ge_max_slices
= MYRI10GE_MAX_SLICES
;
4077 return pci_register_driver(&myri10ge_driver
);
4080 module_init(myri10ge_init_module
);
4082 static __exit
void myri10ge_cleanup_module(void)
4084 #ifdef CONFIG_MYRI10GE_DCA
4085 dca_unregister_notify(&myri10ge_dca_notifier
);
4087 pci_unregister_driver(&myri10ge_driver
);
4090 module_exit(myri10ge_cleanup_module
);