]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blob - drivers/net/ethernet/packetengines/yellowfin.c
Replace <asm/uaccess.h> with <linux/uaccess.h> globally
[mirror_ubuntu-zesty-kernel.git] / drivers / net / ethernet / packetengines / yellowfin.c
1 /* yellowfin.c: A Packet Engines G-NIC ethernet driver for linux. */
2 /*
3 Written 1997-2001 by Donald Becker.
4
5 This software may be used and distributed according to the terms of
6 the GNU General Public License (GPL), incorporated herein by reference.
7 Drivers based on or derived from this code fall under the GPL and must
8 retain the authorship, copyright and license notice. This file is not
9 a complete program and may only be used when the entire operating
10 system is licensed under the GPL.
11
12 This driver is for the Packet Engines G-NIC PCI Gigabit Ethernet adapter.
13 It also supports the Symbios Logic version of the same chip core.
14
15 The author may be reached as becker@scyld.com, or C/O
16 Scyld Computing Corporation
17 410 Severn Ave., Suite 210
18 Annapolis MD 21403
19
20 Support and updates available at
21 http://www.scyld.com/network/yellowfin.html
22 [link no longer provides useful info -jgarzik]
23
24 */
25
26 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
27
28 #define DRV_NAME "yellowfin"
29 #define DRV_VERSION "2.1"
30 #define DRV_RELDATE "Sep 11, 2006"
31
32 /* The user-configurable values.
33 These may be modified when a driver module is loaded.*/
34
35 static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
36 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */
37 static int max_interrupt_work = 20;
38 static int mtu;
39 #ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
40 /* System-wide count of bogus-rx frames. */
41 static int bogus_rx;
42 static int dma_ctrl = 0x004A0263; /* Constrained by errata */
43 static int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
44 #elif defined(YF_NEW) /* A future perfect board :->. */
45 static int dma_ctrl = 0x00CAC277; /* Override when loading module! */
46 static int fifo_cfg = 0x0028;
47 #else
48 static const int dma_ctrl = 0x004A0263; /* Constrained by errata */
49 static const int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
50 #endif
51
52 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
53 Setting to > 1514 effectively disables this feature. */
54 static int rx_copybreak;
55
56 /* Used to pass the media type, etc.
57 No media types are currently defined. These exist for driver
58 interoperability.
59 */
60 #define MAX_UNITS 8 /* More are supported, limit only on options */
61 static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
62 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
63
64 /* Do ugly workaround for GX server chipset errata. */
65 static int gx_fix;
66
67 /* Operational parameters that are set at compile time. */
68
69 /* Keep the ring sizes a power of two for efficiency.
70 Making the Tx ring too long decreases the effectiveness of channel
71 bonding and packet priority.
72 There are no ill effects from too-large receive rings. */
73 #define TX_RING_SIZE 16
74 #define TX_QUEUE_SIZE 12 /* Must be > 4 && <= TX_RING_SIZE */
75 #define RX_RING_SIZE 64
76 #define STATUS_TOTAL_SIZE TX_RING_SIZE*sizeof(struct tx_status_words)
77 #define TX_TOTAL_SIZE 2*TX_RING_SIZE*sizeof(struct yellowfin_desc)
78 #define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct yellowfin_desc)
79
80 /* Operational parameters that usually are not changed. */
81 /* Time in jiffies before concluding the transmitter is hung. */
82 #define TX_TIMEOUT (2*HZ)
83 #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
84
85 #define yellowfin_debug debug
86
87 #include <linux/module.h>
88 #include <linux/kernel.h>
89 #include <linux/string.h>
90 #include <linux/timer.h>
91 #include <linux/errno.h>
92 #include <linux/ioport.h>
93 #include <linux/interrupt.h>
94 #include <linux/pci.h>
95 #include <linux/init.h>
96 #include <linux/mii.h>
97 #include <linux/netdevice.h>
98 #include <linux/etherdevice.h>
99 #include <linux/skbuff.h>
100 #include <linux/ethtool.h>
101 #include <linux/crc32.h>
102 #include <linux/bitops.h>
103 #include <linux/uaccess.h>
104 #include <asm/processor.h> /* Processor type for cache alignment. */
105 #include <asm/unaligned.h>
106 #include <asm/io.h>
107
108 /* These identify the driver base version and may not be removed. */
109 static const char version[] =
110 KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n"
111 " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
112
113 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
114 MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
115 MODULE_LICENSE("GPL");
116
117 module_param(max_interrupt_work, int, 0);
118 module_param(mtu, int, 0);
119 module_param(debug, int, 0);
120 module_param(rx_copybreak, int, 0);
121 module_param_array(options, int, NULL, 0);
122 module_param_array(full_duplex, int, NULL, 0);
123 module_param(gx_fix, int, 0);
124 MODULE_PARM_DESC(max_interrupt_work, "G-NIC maximum events handled per interrupt");
125 MODULE_PARM_DESC(mtu, "G-NIC MTU (all boards)");
126 MODULE_PARM_DESC(debug, "G-NIC debug level (0-7)");
127 MODULE_PARM_DESC(rx_copybreak, "G-NIC copy breakpoint for copy-only-tiny-frames");
128 MODULE_PARM_DESC(options, "G-NIC: Bits 0-3: media type, bit 17: full duplex");
129 MODULE_PARM_DESC(full_duplex, "G-NIC full duplex setting(s) (1)");
130 MODULE_PARM_DESC(gx_fix, "G-NIC: enable GX server chipset bug workaround (0-1)");
131
132 /*
133 Theory of Operation
134
135 I. Board Compatibility
136
137 This device driver is designed for the Packet Engines "Yellowfin" Gigabit
138 Ethernet adapter. The G-NIC 64-bit PCI card is supported, as well as the
139 Symbios 53C885E dual function chip.
140
141 II. Board-specific settings
142
143 PCI bus devices are configured by the system at boot time, so no jumpers
144 need to be set on the board. The system BIOS preferably should assign the
145 PCI INTA signal to an otherwise unused system IRQ line.
146 Note: Kernel versions earlier than 1.3.73 do not support shared PCI
147 interrupt lines.
148
149 III. Driver operation
150
151 IIIa. Ring buffers
152
153 The Yellowfin uses the Descriptor Based DMA Architecture specified by Apple.
154 This is a descriptor list scheme similar to that used by the EEPro100 and
155 Tulip. This driver uses two statically allocated fixed-size descriptor lists
156 formed into rings by a branch from the final descriptor to the beginning of
157 the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
158
159 The driver allocates full frame size skbuffs for the Rx ring buffers at
160 open() time and passes the skb->data field to the Yellowfin as receive data
161 buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
162 a fresh skbuff is allocated and the frame is copied to the new skbuff.
163 When the incoming frame is larger, the skbuff is passed directly up the
164 protocol stack and replaced by a newly allocated skbuff.
165
166 The RX_COPYBREAK value is chosen to trade-off the memory wasted by
167 using a full-sized skbuff for small frames vs. the copying costs of larger
168 frames. For small frames the copying cost is negligible (esp. considering
169 that we are pre-loading the cache with immediately useful header
170 information). For large frames the copying cost is non-trivial, and the
171 larger copy might flush the cache of useful data.
172
173 IIIC. Synchronization
174
175 The driver runs as two independent, single-threaded flows of control. One
176 is the send-packet routine, which enforces single-threaded use by the
177 dev->tbusy flag. The other thread is the interrupt handler, which is single
178 threaded by the hardware and other software.
179
180 The send packet thread has partial control over the Tx ring and 'dev->tbusy'
181 flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
182 queue slot is empty, it clears the tbusy flag when finished otherwise it sets
183 the 'yp->tx_full' flag.
184
185 The interrupt handler has exclusive control over the Rx ring and records stats
186 from the Tx ring. After reaping the stats, it marks the Tx queue entry as
187 empty by incrementing the dirty_tx mark. Iff the 'yp->tx_full' flag is set, it
188 clears both the tx_full and tbusy flags.
189
190 IV. Notes
191
192 Thanks to Kim Stearns of Packet Engines for providing a pair of G-NIC boards.
193 Thanks to Bruce Faust of Digitalscape for providing both their SYM53C885 board
194 and an AlphaStation to verifty the Alpha port!
195
196 IVb. References
197
198 Yellowfin Engineering Design Specification, 4/23/97 Preliminary/Confidential
199 Symbios SYM53C885 PCI-SCSI/Fast Ethernet Multifunction Controller Preliminary
200 Data Manual v3.0
201 http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
202 http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
203
204 IVc. Errata
205
206 See Packet Engines confidential appendix (prototype chips only).
207 */
208
209
210
211 enum capability_flags {
212 HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16,
213 HasMACAddrBug=32, /* Only on early revs. */
214 DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */
215 };
216
217 /* The PCI I/O space extent. */
218 enum {
219 YELLOWFIN_SIZE = 0x100,
220 };
221
222 struct pci_id_info {
223 const char *name;
224 struct match_info {
225 int pci, pci_mask, subsystem, subsystem_mask;
226 int revision, revision_mask; /* Only 8 bits. */
227 } id;
228 int drv_flags; /* Driver use, intended as capability flags. */
229 };
230
231 static const struct pci_id_info pci_id_tbl[] = {
232 {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
233 FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
234 {"Symbios SYM83C885", { 0x07011000, 0xffffffff},
235 HasMII | DontUseEeprom },
236 { }
237 };
238
239 static const struct pci_device_id yellowfin_pci_tbl[] = {
240 { 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
241 { 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
242 { }
243 };
244 MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl);
245
246
247 /* Offsets to the Yellowfin registers. Various sizes and alignments. */
248 enum yellowfin_offsets {
249 TxCtrl=0x00, TxStatus=0x04, TxPtr=0x0C,
250 TxIntrSel=0x10, TxBranchSel=0x14, TxWaitSel=0x18,
251 RxCtrl=0x40, RxStatus=0x44, RxPtr=0x4C,
252 RxIntrSel=0x50, RxBranchSel=0x54, RxWaitSel=0x58,
253 EventStatus=0x80, IntrEnb=0x82, IntrClear=0x84, IntrStatus=0x86,
254 ChipRev=0x8C, DMACtrl=0x90, TxThreshold=0x94,
255 Cnfg=0xA0, FrameGap0=0xA2, FrameGap1=0xA4,
256 MII_Cmd=0xA6, MII_Addr=0xA8, MII_Wr_Data=0xAA, MII_Rd_Data=0xAC,
257 MII_Status=0xAE,
258 RxDepth=0xB8, FlowCtrl=0xBC,
259 AddrMode=0xD0, StnAddr=0xD2, HashTbl=0xD8, FIFOcfg=0xF8,
260 EEStatus=0xF0, EECtrl=0xF1, EEAddr=0xF2, EERead=0xF3, EEWrite=0xF4,
261 EEFeature=0xF5,
262 };
263
264 /* The Yellowfin Rx and Tx buffer descriptors.
265 Elements are written as 32 bit for endian portability. */
266 struct yellowfin_desc {
267 __le32 dbdma_cmd;
268 __le32 addr;
269 __le32 branch_addr;
270 __le32 result_status;
271 };
272
273 struct tx_status_words {
274 #ifdef __BIG_ENDIAN
275 u16 tx_errs;
276 u16 tx_cnt;
277 u16 paused;
278 u16 total_tx_cnt;
279 #else /* Little endian chips. */
280 u16 tx_cnt;
281 u16 tx_errs;
282 u16 total_tx_cnt;
283 u16 paused;
284 #endif /* __BIG_ENDIAN */
285 };
286
287 /* Bits in yellowfin_desc.cmd */
288 enum desc_cmd_bits {
289 CMD_TX_PKT=0x10000000, CMD_RX_BUF=0x20000000, CMD_TXSTATUS=0x30000000,
290 CMD_NOP=0x60000000, CMD_STOP=0x70000000,
291 BRANCH_ALWAYS=0x0C0000, INTR_ALWAYS=0x300000, WAIT_ALWAYS=0x030000,
292 BRANCH_IFTRUE=0x040000,
293 };
294
295 /* Bits in yellowfin_desc.status */
296 enum desc_status_bits { RX_EOP=0x0040, };
297
298 /* Bits in the interrupt status/mask registers. */
299 enum intr_status_bits {
300 IntrRxDone=0x01, IntrRxInvalid=0x02, IntrRxPCIFault=0x04,IntrRxPCIErr=0x08,
301 IntrTxDone=0x10, IntrTxInvalid=0x20, IntrTxPCIFault=0x40,IntrTxPCIErr=0x80,
302 IntrEarlyRx=0x100, IntrWakeup=0x200, };
303
304 #define PRIV_ALIGN 31 /* Required alignment mask */
305 #define MII_CNT 4
306 struct yellowfin_private {
307 /* Descriptor rings first for alignment.
308 Tx requires a second descriptor for status. */
309 struct yellowfin_desc *rx_ring;
310 struct yellowfin_desc *tx_ring;
311 struct sk_buff* rx_skbuff[RX_RING_SIZE];
312 struct sk_buff* tx_skbuff[TX_RING_SIZE];
313 dma_addr_t rx_ring_dma;
314 dma_addr_t tx_ring_dma;
315
316 struct tx_status_words *tx_status;
317 dma_addr_t tx_status_dma;
318
319 struct timer_list timer; /* Media selection timer. */
320 /* Frequently used and paired value: keep adjacent for cache effect. */
321 int chip_id, drv_flags;
322 struct pci_dev *pci_dev;
323 unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
324 unsigned int rx_buf_sz; /* Based on MTU+slack. */
325 struct tx_status_words *tx_tail_desc;
326 unsigned int cur_tx, dirty_tx;
327 int tx_threshold;
328 unsigned int tx_full:1; /* The Tx queue is full. */
329 unsigned int full_duplex:1; /* Full-duplex operation requested. */
330 unsigned int duplex_lock:1;
331 unsigned int medialock:1; /* Do not sense media. */
332 unsigned int default_port:4; /* Last dev->if_port value. */
333 /* MII transceiver section. */
334 int mii_cnt; /* MII device addresses. */
335 u16 advertising; /* NWay media advertisement */
336 unsigned char phys[MII_CNT]; /* MII device addresses, only first one used */
337 spinlock_t lock;
338 void __iomem *base;
339 };
340
341 static int read_eeprom(void __iomem *ioaddr, int location);
342 static int mdio_read(void __iomem *ioaddr, int phy_id, int location);
343 static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value);
344 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
345 static int yellowfin_open(struct net_device *dev);
346 static void yellowfin_timer(unsigned long data);
347 static void yellowfin_tx_timeout(struct net_device *dev);
348 static int yellowfin_init_ring(struct net_device *dev);
349 static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb,
350 struct net_device *dev);
351 static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
352 static int yellowfin_rx(struct net_device *dev);
353 static void yellowfin_error(struct net_device *dev, int intr_status);
354 static int yellowfin_close(struct net_device *dev);
355 static void set_rx_mode(struct net_device *dev);
356 static const struct ethtool_ops ethtool_ops;
357
358 static const struct net_device_ops netdev_ops = {
359 .ndo_open = yellowfin_open,
360 .ndo_stop = yellowfin_close,
361 .ndo_start_xmit = yellowfin_start_xmit,
362 .ndo_set_rx_mode = set_rx_mode,
363 .ndo_validate_addr = eth_validate_addr,
364 .ndo_set_mac_address = eth_mac_addr,
365 .ndo_do_ioctl = netdev_ioctl,
366 .ndo_tx_timeout = yellowfin_tx_timeout,
367 };
368
369 static int yellowfin_init_one(struct pci_dev *pdev,
370 const struct pci_device_id *ent)
371 {
372 struct net_device *dev;
373 struct yellowfin_private *np;
374 int irq;
375 int chip_idx = ent->driver_data;
376 static int find_cnt;
377 void __iomem *ioaddr;
378 int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
379 int drv_flags = pci_id_tbl[chip_idx].drv_flags;
380 void *ring_space;
381 dma_addr_t ring_dma;
382 #ifdef USE_IO_OPS
383 int bar = 0;
384 #else
385 int bar = 1;
386 #endif
387
388 /* when built into the kernel, we only print version if device is found */
389 #ifndef MODULE
390 static int printed_version;
391 if (!printed_version++)
392 printk(version);
393 #endif
394
395 i = pci_enable_device(pdev);
396 if (i) return i;
397
398 dev = alloc_etherdev(sizeof(*np));
399 if (!dev)
400 return -ENOMEM;
401
402 SET_NETDEV_DEV(dev, &pdev->dev);
403
404 np = netdev_priv(dev);
405
406 if (pci_request_regions(pdev, DRV_NAME))
407 goto err_out_free_netdev;
408
409 pci_set_master (pdev);
410
411 ioaddr = pci_iomap(pdev, bar, YELLOWFIN_SIZE);
412 if (!ioaddr)
413 goto err_out_free_res;
414
415 irq = pdev->irq;
416
417 if (drv_flags & DontUseEeprom)
418 for (i = 0; i < 6; i++)
419 dev->dev_addr[i] = ioread8(ioaddr + StnAddr + i);
420 else {
421 int ee_offset = (read_eeprom(ioaddr, 6) == 0xff ? 0x100 : 0);
422 for (i = 0; i < 6; i++)
423 dev->dev_addr[i] = read_eeprom(ioaddr, ee_offset + i);
424 }
425
426 /* Reset the chip. */
427 iowrite32(0x80000000, ioaddr + DMACtrl);
428
429 pci_set_drvdata(pdev, dev);
430 spin_lock_init(&np->lock);
431
432 np->pci_dev = pdev;
433 np->chip_id = chip_idx;
434 np->drv_flags = drv_flags;
435 np->base = ioaddr;
436
437 ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
438 if (!ring_space)
439 goto err_out_cleardev;
440 np->tx_ring = ring_space;
441 np->tx_ring_dma = ring_dma;
442
443 ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
444 if (!ring_space)
445 goto err_out_unmap_tx;
446 np->rx_ring = ring_space;
447 np->rx_ring_dma = ring_dma;
448
449 ring_space = pci_alloc_consistent(pdev, STATUS_TOTAL_SIZE, &ring_dma);
450 if (!ring_space)
451 goto err_out_unmap_rx;
452 np->tx_status = ring_space;
453 np->tx_status_dma = ring_dma;
454
455 if (dev->mem_start)
456 option = dev->mem_start;
457
458 /* The lower four bits are the media type. */
459 if (option > 0) {
460 if (option & 0x200)
461 np->full_duplex = 1;
462 np->default_port = option & 15;
463 if (np->default_port)
464 np->medialock = 1;
465 }
466 if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0)
467 np->full_duplex = 1;
468
469 if (np->full_duplex)
470 np->duplex_lock = 1;
471
472 /* The Yellowfin-specific entries in the device structure. */
473 dev->netdev_ops = &netdev_ops;
474 dev->ethtool_ops = &ethtool_ops;
475 dev->watchdog_timeo = TX_TIMEOUT;
476
477 if (mtu)
478 dev->mtu = mtu;
479
480 i = register_netdev(dev);
481 if (i)
482 goto err_out_unmap_status;
483
484 netdev_info(dev, "%s type %8x at %p, %pM, IRQ %d\n",
485 pci_id_tbl[chip_idx].name,
486 ioread32(ioaddr + ChipRev), ioaddr,
487 dev->dev_addr, irq);
488
489 if (np->drv_flags & HasMII) {
490 int phy, phy_idx = 0;
491 for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) {
492 int mii_status = mdio_read(ioaddr, phy, 1);
493 if (mii_status != 0xffff && mii_status != 0x0000) {
494 np->phys[phy_idx++] = phy;
495 np->advertising = mdio_read(ioaddr, phy, 4);
496 netdev_info(dev, "MII PHY found at address %d, status 0x%04x advertising %04x\n",
497 phy, mii_status, np->advertising);
498 }
499 }
500 np->mii_cnt = phy_idx;
501 }
502
503 find_cnt++;
504
505 return 0;
506
507 err_out_unmap_status:
508 pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
509 np->tx_status_dma);
510 err_out_unmap_rx:
511 pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
512 err_out_unmap_tx:
513 pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
514 err_out_cleardev:
515 pci_iounmap(pdev, ioaddr);
516 err_out_free_res:
517 pci_release_regions(pdev);
518 err_out_free_netdev:
519 free_netdev (dev);
520 return -ENODEV;
521 }
522
523 static int read_eeprom(void __iomem *ioaddr, int location)
524 {
525 int bogus_cnt = 10000; /* Typical 33Mhz: 1050 ticks */
526
527 iowrite8(location, ioaddr + EEAddr);
528 iowrite8(0x30 | ((location >> 8) & 7), ioaddr + EECtrl);
529 while ((ioread8(ioaddr + EEStatus) & 0x80) && --bogus_cnt > 0)
530 ;
531 return ioread8(ioaddr + EERead);
532 }
533
534 /* MII Managemen Data I/O accesses.
535 These routines assume the MDIO controller is idle, and do not exit until
536 the command is finished. */
537
538 static int mdio_read(void __iomem *ioaddr, int phy_id, int location)
539 {
540 int i;
541
542 iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
543 iowrite16(1, ioaddr + MII_Cmd);
544 for (i = 10000; i >= 0; i--)
545 if ((ioread16(ioaddr + MII_Status) & 1) == 0)
546 break;
547 return ioread16(ioaddr + MII_Rd_Data);
548 }
549
550 static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value)
551 {
552 int i;
553
554 iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
555 iowrite16(value, ioaddr + MII_Wr_Data);
556
557 /* Wait for the command to finish. */
558 for (i = 10000; i >= 0; i--)
559 if ((ioread16(ioaddr + MII_Status) & 1) == 0)
560 break;
561 }
562
563
564 static int yellowfin_open(struct net_device *dev)
565 {
566 struct yellowfin_private *yp = netdev_priv(dev);
567 const int irq = yp->pci_dev->irq;
568 void __iomem *ioaddr = yp->base;
569 int i, rc;
570
571 /* Reset the chip. */
572 iowrite32(0x80000000, ioaddr + DMACtrl);
573
574 rc = request_irq(irq, yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
575 if (rc)
576 return rc;
577
578 rc = yellowfin_init_ring(dev);
579 if (rc < 0)
580 goto err_free_irq;
581
582 iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
583 iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
584
585 for (i = 0; i < 6; i++)
586 iowrite8(dev->dev_addr[i], ioaddr + StnAddr + i);
587
588 /* Set up various condition 'select' registers.
589 There are no options here. */
590 iowrite32(0x00800080, ioaddr + TxIntrSel); /* Interrupt on Tx abort */
591 iowrite32(0x00800080, ioaddr + TxBranchSel); /* Branch on Tx abort */
592 iowrite32(0x00400040, ioaddr + TxWaitSel); /* Wait on Tx status */
593 iowrite32(0x00400040, ioaddr + RxIntrSel); /* Interrupt on Rx done */
594 iowrite32(0x00400040, ioaddr + RxBranchSel); /* Branch on Rx error */
595 iowrite32(0x00400040, ioaddr + RxWaitSel); /* Wait on Rx done */
596
597 /* Initialize other registers: with so many this eventually this will
598 converted to an offset/value list. */
599 iowrite32(dma_ctrl, ioaddr + DMACtrl);
600 iowrite16(fifo_cfg, ioaddr + FIFOcfg);
601 /* Enable automatic generation of flow control frames, period 0xffff. */
602 iowrite32(0x0030FFFF, ioaddr + FlowCtrl);
603
604 yp->tx_threshold = 32;
605 iowrite32(yp->tx_threshold, ioaddr + TxThreshold);
606
607 if (dev->if_port == 0)
608 dev->if_port = yp->default_port;
609
610 netif_start_queue(dev);
611
612 /* Setting the Rx mode will start the Rx process. */
613 if (yp->drv_flags & IsGigabit) {
614 /* We are always in full-duplex mode with gigabit! */
615 yp->full_duplex = 1;
616 iowrite16(0x01CF, ioaddr + Cnfg);
617 } else {
618 iowrite16(0x0018, ioaddr + FrameGap0); /* 0060/4060 for non-MII 10baseT */
619 iowrite16(0x1018, ioaddr + FrameGap1);
620 iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
621 }
622 set_rx_mode(dev);
623
624 /* Enable interrupts by setting the interrupt mask. */
625 iowrite16(0x81ff, ioaddr + IntrEnb); /* See enum intr_status_bits */
626 iowrite16(0x0000, ioaddr + EventStatus); /* Clear non-interrupting events */
627 iowrite32(0x80008000, ioaddr + RxCtrl); /* Start Rx and Tx channels. */
628 iowrite32(0x80008000, ioaddr + TxCtrl);
629
630 if (yellowfin_debug > 2) {
631 netdev_printk(KERN_DEBUG, dev, "Done %s()\n", __func__);
632 }
633
634 /* Set the timer to check for link beat. */
635 init_timer(&yp->timer);
636 yp->timer.expires = jiffies + 3*HZ;
637 yp->timer.data = (unsigned long)dev;
638 yp->timer.function = yellowfin_timer; /* timer handler */
639 add_timer(&yp->timer);
640 out:
641 return rc;
642
643 err_free_irq:
644 free_irq(irq, dev);
645 goto out;
646 }
647
648 static void yellowfin_timer(unsigned long data)
649 {
650 struct net_device *dev = (struct net_device *)data;
651 struct yellowfin_private *yp = netdev_priv(dev);
652 void __iomem *ioaddr = yp->base;
653 int next_tick = 60*HZ;
654
655 if (yellowfin_debug > 3) {
656 netdev_printk(KERN_DEBUG, dev, "Yellowfin timer tick, status %08x\n",
657 ioread16(ioaddr + IntrStatus));
658 }
659
660 if (yp->mii_cnt) {
661 int bmsr = mdio_read(ioaddr, yp->phys[0], MII_BMSR);
662 int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA);
663 int negotiated = lpa & yp->advertising;
664 if (yellowfin_debug > 1)
665 netdev_printk(KERN_DEBUG, dev, "MII #%d status register is %04x, link partner capability %04x\n",
666 yp->phys[0], bmsr, lpa);
667
668 yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated);
669
670 iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
671
672 if (bmsr & BMSR_LSTATUS)
673 next_tick = 60*HZ;
674 else
675 next_tick = 3*HZ;
676 }
677
678 yp->timer.expires = jiffies + next_tick;
679 add_timer(&yp->timer);
680 }
681
682 static void yellowfin_tx_timeout(struct net_device *dev)
683 {
684 struct yellowfin_private *yp = netdev_priv(dev);
685 void __iomem *ioaddr = yp->base;
686
687 netdev_warn(dev, "Yellowfin transmit timed out at %d/%d Tx status %04x, Rx status %04x, resetting...\n",
688 yp->cur_tx, yp->dirty_tx,
689 ioread32(ioaddr + TxStatus),
690 ioread32(ioaddr + RxStatus));
691
692 /* Note: these should be KERN_DEBUG. */
693 if (yellowfin_debug) {
694 int i;
695 pr_warn(" Rx ring %p: ", yp->rx_ring);
696 for (i = 0; i < RX_RING_SIZE; i++)
697 pr_cont(" %08x", yp->rx_ring[i].result_status);
698 pr_cont("\n");
699 pr_warn(" Tx ring %p: ", yp->tx_ring);
700 for (i = 0; i < TX_RING_SIZE; i++)
701 pr_cont(" %04x /%08x",
702 yp->tx_status[i].tx_errs,
703 yp->tx_ring[i].result_status);
704 pr_cont("\n");
705 }
706
707 /* If the hardware is found to hang regularly, we will update the code
708 to reinitialize the chip here. */
709 dev->if_port = 0;
710
711 /* Wake the potentially-idle transmit channel. */
712 iowrite32(0x10001000, yp->base + TxCtrl);
713 if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
714 netif_wake_queue (dev); /* Typical path */
715
716 netif_trans_update(dev); /* prevent tx timeout */
717 dev->stats.tx_errors++;
718 }
719
720 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
721 static int yellowfin_init_ring(struct net_device *dev)
722 {
723 struct yellowfin_private *yp = netdev_priv(dev);
724 int i, j;
725
726 yp->tx_full = 0;
727 yp->cur_rx = yp->cur_tx = 0;
728 yp->dirty_tx = 0;
729
730 yp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
731
732 for (i = 0; i < RX_RING_SIZE; i++) {
733 yp->rx_ring[i].dbdma_cmd =
734 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
735 yp->rx_ring[i].branch_addr = cpu_to_le32(yp->rx_ring_dma +
736 ((i+1)%RX_RING_SIZE)*sizeof(struct yellowfin_desc));
737 }
738
739 for (i = 0; i < RX_RING_SIZE; i++) {
740 struct sk_buff *skb = netdev_alloc_skb(dev, yp->rx_buf_sz + 2);
741 yp->rx_skbuff[i] = skb;
742 if (skb == NULL)
743 break;
744 skb_reserve(skb, 2); /* 16 byte align the IP header. */
745 yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
746 skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
747 }
748 if (i != RX_RING_SIZE) {
749 for (j = 0; j < i; j++)
750 dev_kfree_skb(yp->rx_skbuff[j]);
751 return -ENOMEM;
752 }
753 yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
754 yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
755
756 #define NO_TXSTATS
757 #ifdef NO_TXSTATS
758 /* In this mode the Tx ring needs only a single descriptor. */
759 for (i = 0; i < TX_RING_SIZE; i++) {
760 yp->tx_skbuff[i] = NULL;
761 yp->tx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
762 yp->tx_ring[i].branch_addr = cpu_to_le32(yp->tx_ring_dma +
763 ((i+1)%TX_RING_SIZE)*sizeof(struct yellowfin_desc));
764 }
765 /* Wrap ring */
766 yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
767 #else
768 {
769 /* Tx ring needs a pair of descriptors, the second for the status. */
770 for (i = 0; i < TX_RING_SIZE; i++) {
771 j = 2*i;
772 yp->tx_skbuff[i] = 0;
773 /* Branch on Tx error. */
774 yp->tx_ring[j].dbdma_cmd = cpu_to_le32(CMD_STOP);
775 yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
776 (j+1)*sizeof(struct yellowfin_desc));
777 j++;
778 if (yp->flags & FullTxStatus) {
779 yp->tx_ring[j].dbdma_cmd =
780 cpu_to_le32(CMD_TXSTATUS | sizeof(*yp->tx_status));
781 yp->tx_ring[j].request_cnt = sizeof(*yp->tx_status);
782 yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
783 i*sizeof(struct tx_status_words));
784 } else {
785 /* Symbios chips write only tx_errs word. */
786 yp->tx_ring[j].dbdma_cmd =
787 cpu_to_le32(CMD_TXSTATUS | INTR_ALWAYS | 2);
788 yp->tx_ring[j].request_cnt = 2;
789 /* Om pade ummmmm... */
790 yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
791 i*sizeof(struct tx_status_words) +
792 &(yp->tx_status[0].tx_errs) -
793 &(yp->tx_status[0]));
794 }
795 yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
796 ((j+1)%(2*TX_RING_SIZE))*sizeof(struct yellowfin_desc));
797 }
798 /* Wrap ring */
799 yp->tx_ring[++j].dbdma_cmd |= cpu_to_le32(BRANCH_ALWAYS | INTR_ALWAYS);
800 }
801 #endif
802 yp->tx_tail_desc = &yp->tx_status[0];
803 return 0;
804 }
805
806 static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb,
807 struct net_device *dev)
808 {
809 struct yellowfin_private *yp = netdev_priv(dev);
810 unsigned entry;
811 int len = skb->len;
812
813 netif_stop_queue (dev);
814
815 /* Note: Ordering is important here, set the field with the
816 "ownership" bit last, and only then increment cur_tx. */
817
818 /* Calculate the next Tx descriptor entry. */
819 entry = yp->cur_tx % TX_RING_SIZE;
820
821 if (gx_fix) { /* Note: only works for paddable protocols e.g. IP. */
822 int cacheline_end = ((unsigned long)skb->data + skb->len) % 32;
823 /* Fix GX chipset errata. */
824 if (cacheline_end > 24 || cacheline_end == 0) {
825 len = skb->len + 32 - cacheline_end + 1;
826 if (skb_padto(skb, len)) {
827 yp->tx_skbuff[entry] = NULL;
828 netif_wake_queue(dev);
829 return NETDEV_TX_OK;
830 }
831 }
832 }
833 yp->tx_skbuff[entry] = skb;
834
835 #ifdef NO_TXSTATS
836 yp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
837 skb->data, len, PCI_DMA_TODEVICE));
838 yp->tx_ring[entry].result_status = 0;
839 if (entry >= TX_RING_SIZE-1) {
840 /* New stop command. */
841 yp->tx_ring[0].dbdma_cmd = cpu_to_le32(CMD_STOP);
842 yp->tx_ring[TX_RING_SIZE-1].dbdma_cmd =
843 cpu_to_le32(CMD_TX_PKT|BRANCH_ALWAYS | len);
844 } else {
845 yp->tx_ring[entry+1].dbdma_cmd = cpu_to_le32(CMD_STOP);
846 yp->tx_ring[entry].dbdma_cmd =
847 cpu_to_le32(CMD_TX_PKT | BRANCH_IFTRUE | len);
848 }
849 yp->cur_tx++;
850 #else
851 yp->tx_ring[entry<<1].request_cnt = len;
852 yp->tx_ring[entry<<1].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
853 skb->data, len, PCI_DMA_TODEVICE));
854 /* The input_last (status-write) command is constant, but we must
855 rewrite the subsequent 'stop' command. */
856
857 yp->cur_tx++;
858 {
859 unsigned next_entry = yp->cur_tx % TX_RING_SIZE;
860 yp->tx_ring[next_entry<<1].dbdma_cmd = cpu_to_le32(CMD_STOP);
861 }
862 /* Final step -- overwrite the old 'stop' command. */
863
864 yp->tx_ring[entry<<1].dbdma_cmd =
865 cpu_to_le32( ((entry % 6) == 0 ? CMD_TX_PKT|INTR_ALWAYS|BRANCH_IFTRUE :
866 CMD_TX_PKT | BRANCH_IFTRUE) | len);
867 #endif
868
869 /* Non-x86 Todo: explicitly flush cache lines here. */
870
871 /* Wake the potentially-idle transmit channel. */
872 iowrite32(0x10001000, yp->base + TxCtrl);
873
874 if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
875 netif_start_queue (dev); /* Typical path */
876 else
877 yp->tx_full = 1;
878
879 if (yellowfin_debug > 4) {
880 netdev_printk(KERN_DEBUG, dev, "Yellowfin transmit frame #%d queued in slot %d\n",
881 yp->cur_tx, entry);
882 }
883 return NETDEV_TX_OK;
884 }
885
886 /* The interrupt handler does all of the Rx thread work and cleans up
887 after the Tx thread. */
888 static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
889 {
890 struct net_device *dev = dev_instance;
891 struct yellowfin_private *yp;
892 void __iomem *ioaddr;
893 int boguscnt = max_interrupt_work;
894 unsigned int handled = 0;
895
896 yp = netdev_priv(dev);
897 ioaddr = yp->base;
898
899 spin_lock (&yp->lock);
900
901 do {
902 u16 intr_status = ioread16(ioaddr + IntrClear);
903
904 if (yellowfin_debug > 4)
905 netdev_printk(KERN_DEBUG, dev, "Yellowfin interrupt, status %04x\n",
906 intr_status);
907
908 if (intr_status == 0)
909 break;
910 handled = 1;
911
912 if (intr_status & (IntrRxDone | IntrEarlyRx)) {
913 yellowfin_rx(dev);
914 iowrite32(0x10001000, ioaddr + RxCtrl); /* Wake Rx engine. */
915 }
916
917 #ifdef NO_TXSTATS
918 for (; yp->cur_tx - yp->dirty_tx > 0; yp->dirty_tx++) {
919 int entry = yp->dirty_tx % TX_RING_SIZE;
920 struct sk_buff *skb;
921
922 if (yp->tx_ring[entry].result_status == 0)
923 break;
924 skb = yp->tx_skbuff[entry];
925 dev->stats.tx_packets++;
926 dev->stats.tx_bytes += skb->len;
927 /* Free the original skb. */
928 pci_unmap_single(yp->pci_dev, le32_to_cpu(yp->tx_ring[entry].addr),
929 skb->len, PCI_DMA_TODEVICE);
930 dev_kfree_skb_irq(skb);
931 yp->tx_skbuff[entry] = NULL;
932 }
933 if (yp->tx_full &&
934 yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) {
935 /* The ring is no longer full, clear tbusy. */
936 yp->tx_full = 0;
937 netif_wake_queue(dev);
938 }
939 #else
940 if ((intr_status & IntrTxDone) || (yp->tx_tail_desc->tx_errs)) {
941 unsigned dirty_tx = yp->dirty_tx;
942
943 for (dirty_tx = yp->dirty_tx; yp->cur_tx - dirty_tx > 0;
944 dirty_tx++) {
945 /* Todo: optimize this. */
946 int entry = dirty_tx % TX_RING_SIZE;
947 u16 tx_errs = yp->tx_status[entry].tx_errs;
948 struct sk_buff *skb;
949
950 #ifndef final_version
951 if (yellowfin_debug > 5)
952 netdev_printk(KERN_DEBUG, dev, "Tx queue %d check, Tx status %04x %04x %04x %04x\n",
953 entry,
954 yp->tx_status[entry].tx_cnt,
955 yp->tx_status[entry].tx_errs,
956 yp->tx_status[entry].total_tx_cnt,
957 yp->tx_status[entry].paused);
958 #endif
959 if (tx_errs == 0)
960 break; /* It still hasn't been Txed */
961 skb = yp->tx_skbuff[entry];
962 if (tx_errs & 0xF810) {
963 /* There was an major error, log it. */
964 #ifndef final_version
965 if (yellowfin_debug > 1)
966 netdev_printk(KERN_DEBUG, dev, "Transmit error, Tx status %04x\n",
967 tx_errs);
968 #endif
969 dev->stats.tx_errors++;
970 if (tx_errs & 0xF800) dev->stats.tx_aborted_errors++;
971 if (tx_errs & 0x0800) dev->stats.tx_carrier_errors++;
972 if (tx_errs & 0x2000) dev->stats.tx_window_errors++;
973 if (tx_errs & 0x8000) dev->stats.tx_fifo_errors++;
974 } else {
975 #ifndef final_version
976 if (yellowfin_debug > 4)
977 netdev_printk(KERN_DEBUG, dev, "Normal transmit, Tx status %04x\n",
978 tx_errs);
979 #endif
980 dev->stats.tx_bytes += skb->len;
981 dev->stats.collisions += tx_errs & 15;
982 dev->stats.tx_packets++;
983 }
984 /* Free the original skb. */
985 pci_unmap_single(yp->pci_dev,
986 yp->tx_ring[entry<<1].addr, skb->len,
987 PCI_DMA_TODEVICE);
988 dev_kfree_skb_irq(skb);
989 yp->tx_skbuff[entry] = 0;
990 /* Mark status as empty. */
991 yp->tx_status[entry].tx_errs = 0;
992 }
993
994 #ifndef final_version
995 if (yp->cur_tx - dirty_tx > TX_RING_SIZE) {
996 netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d\n",
997 dirty_tx, yp->cur_tx, yp->tx_full);
998 dirty_tx += TX_RING_SIZE;
999 }
1000 #endif
1001
1002 if (yp->tx_full &&
1003 yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) {
1004 /* The ring is no longer full, clear tbusy. */
1005 yp->tx_full = 0;
1006 netif_wake_queue(dev);
1007 }
1008
1009 yp->dirty_tx = dirty_tx;
1010 yp->tx_tail_desc = &yp->tx_status[dirty_tx % TX_RING_SIZE];
1011 }
1012 #endif
1013
1014 /* Log errors and other uncommon events. */
1015 if (intr_status & 0x2ee) /* Abnormal error summary. */
1016 yellowfin_error(dev, intr_status);
1017
1018 if (--boguscnt < 0) {
1019 netdev_warn(dev, "Too much work at interrupt, status=%#04x\n",
1020 intr_status);
1021 break;
1022 }
1023 } while (1);
1024
1025 if (yellowfin_debug > 3)
1026 netdev_printk(KERN_DEBUG, dev, "exiting interrupt, status=%#04x\n",
1027 ioread16(ioaddr + IntrStatus));
1028
1029 spin_unlock (&yp->lock);
1030 return IRQ_RETVAL(handled);
1031 }
1032
1033 /* This routine is logically part of the interrupt handler, but separated
1034 for clarity and better register allocation. */
1035 static int yellowfin_rx(struct net_device *dev)
1036 {
1037 struct yellowfin_private *yp = netdev_priv(dev);
1038 int entry = yp->cur_rx % RX_RING_SIZE;
1039 int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx;
1040
1041 if (yellowfin_debug > 4) {
1042 printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %08x\n",
1043 entry, yp->rx_ring[entry].result_status);
1044 printk(KERN_DEBUG " #%d desc. %08x %08x %08x\n",
1045 entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr,
1046 yp->rx_ring[entry].result_status);
1047 }
1048
1049 /* If EOP is set on the next entry, it's a new packet. Send it up. */
1050 while (1) {
1051 struct yellowfin_desc *desc = &yp->rx_ring[entry];
1052 struct sk_buff *rx_skb = yp->rx_skbuff[entry];
1053 s16 frame_status;
1054 u16 desc_status;
1055 int data_size, yf_size;
1056 u8 *buf_addr;
1057
1058 if(!desc->result_status)
1059 break;
1060 pci_dma_sync_single_for_cpu(yp->pci_dev, le32_to_cpu(desc->addr),
1061 yp->rx_buf_sz, PCI_DMA_FROMDEVICE);
1062 desc_status = le32_to_cpu(desc->result_status) >> 16;
1063 buf_addr = rx_skb->data;
1064 data_size = (le32_to_cpu(desc->dbdma_cmd) -
1065 le32_to_cpu(desc->result_status)) & 0xffff;
1066 frame_status = get_unaligned_le16(&(buf_addr[data_size - 2]));
1067 if (yellowfin_debug > 4)
1068 printk(KERN_DEBUG " %s() status was %04x\n",
1069 __func__, frame_status);
1070 if (--boguscnt < 0)
1071 break;
1072
1073 yf_size = sizeof(struct yellowfin_desc);
1074
1075 if ( ! (desc_status & RX_EOP)) {
1076 if (data_size != 0)
1077 netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %04x, data_size %d!\n",
1078 desc_status, data_size);
1079 dev->stats.rx_length_errors++;
1080 } else if ((yp->drv_flags & IsGigabit) && (frame_status & 0x0038)) {
1081 /* There was a error. */
1082 if (yellowfin_debug > 3)
1083 printk(KERN_DEBUG " %s() Rx error was %04x\n",
1084 __func__, frame_status);
1085 dev->stats.rx_errors++;
1086 if (frame_status & 0x0060) dev->stats.rx_length_errors++;
1087 if (frame_status & 0x0008) dev->stats.rx_frame_errors++;
1088 if (frame_status & 0x0010) dev->stats.rx_crc_errors++;
1089 if (frame_status < 0) dev->stats.rx_dropped++;
1090 } else if ( !(yp->drv_flags & IsGigabit) &&
1091 ((buf_addr[data_size-1] & 0x85) || buf_addr[data_size-2] & 0xC0)) {
1092 u8 status1 = buf_addr[data_size-2];
1093 u8 status2 = buf_addr[data_size-1];
1094 dev->stats.rx_errors++;
1095 if (status1 & 0xC0) dev->stats.rx_length_errors++;
1096 if (status2 & 0x03) dev->stats.rx_frame_errors++;
1097 if (status2 & 0x04) dev->stats.rx_crc_errors++;
1098 if (status2 & 0x80) dev->stats.rx_dropped++;
1099 #ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
1100 } else if ((yp->flags & HasMACAddrBug) &&
1101 !ether_addr_equal(le32_to_cpu(yp->rx_ring_dma +
1102 entry * yf_size),
1103 dev->dev_addr) &&
1104 !ether_addr_equal(le32_to_cpu(yp->rx_ring_dma +
1105 entry * yf_size),
1106 "\377\377\377\377\377\377")) {
1107 if (bogus_rx++ == 0)
1108 netdev_warn(dev, "Bad frame to %pM\n",
1109 buf_addr);
1110 #endif
1111 } else {
1112 struct sk_buff *skb;
1113 int pkt_len = data_size -
1114 (yp->chip_id ? 7 : 8 + buf_addr[data_size - 8]);
1115 /* To verify: Yellowfin Length should omit the CRC! */
1116
1117 #ifndef final_version
1118 if (yellowfin_debug > 4)
1119 printk(KERN_DEBUG " %s() normal Rx pkt length %d of %d, bogus_cnt %d\n",
1120 __func__, pkt_len, data_size, boguscnt);
1121 #endif
1122 /* Check if the packet is long enough to just pass up the skbuff
1123 without copying to a properly sized skbuff. */
1124 if (pkt_len > rx_copybreak) {
1125 skb_put(skb = rx_skb, pkt_len);
1126 pci_unmap_single(yp->pci_dev,
1127 le32_to_cpu(yp->rx_ring[entry].addr),
1128 yp->rx_buf_sz,
1129 PCI_DMA_FROMDEVICE);
1130 yp->rx_skbuff[entry] = NULL;
1131 } else {
1132 skb = netdev_alloc_skb(dev, pkt_len + 2);
1133 if (skb == NULL)
1134 break;
1135 skb_reserve(skb, 2); /* 16 byte align the IP header */
1136 skb_copy_to_linear_data(skb, rx_skb->data, pkt_len);
1137 skb_put(skb, pkt_len);
1138 pci_dma_sync_single_for_device(yp->pci_dev,
1139 le32_to_cpu(desc->addr),
1140 yp->rx_buf_sz,
1141 PCI_DMA_FROMDEVICE);
1142 }
1143 skb->protocol = eth_type_trans(skb, dev);
1144 netif_rx(skb);
1145 dev->stats.rx_packets++;
1146 dev->stats.rx_bytes += pkt_len;
1147 }
1148 entry = (++yp->cur_rx) % RX_RING_SIZE;
1149 }
1150
1151 /* Refill the Rx ring buffers. */
1152 for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) {
1153 entry = yp->dirty_rx % RX_RING_SIZE;
1154 if (yp->rx_skbuff[entry] == NULL) {
1155 struct sk_buff *skb = netdev_alloc_skb(dev, yp->rx_buf_sz + 2);
1156 if (skb == NULL)
1157 break; /* Better luck next round. */
1158 yp->rx_skbuff[entry] = skb;
1159 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
1160 yp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
1161 skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
1162 }
1163 yp->rx_ring[entry].dbdma_cmd = cpu_to_le32(CMD_STOP);
1164 yp->rx_ring[entry].result_status = 0; /* Clear complete bit. */
1165 if (entry != 0)
1166 yp->rx_ring[entry - 1].dbdma_cmd =
1167 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
1168 else
1169 yp->rx_ring[RX_RING_SIZE - 1].dbdma_cmd =
1170 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | BRANCH_ALWAYS
1171 | yp->rx_buf_sz);
1172 }
1173
1174 return 0;
1175 }
1176
1177 static void yellowfin_error(struct net_device *dev, int intr_status)
1178 {
1179 netdev_err(dev, "Something Wicked happened! %04x\n", intr_status);
1180 /* Hmmmmm, it's not clear what to do here. */
1181 if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
1182 dev->stats.tx_errors++;
1183 if (intr_status & (IntrRxPCIErr | IntrRxPCIFault))
1184 dev->stats.rx_errors++;
1185 }
1186
1187 static int yellowfin_close(struct net_device *dev)
1188 {
1189 struct yellowfin_private *yp = netdev_priv(dev);
1190 void __iomem *ioaddr = yp->base;
1191 int i;
1192
1193 netif_stop_queue (dev);
1194
1195 if (yellowfin_debug > 1) {
1196 netdev_printk(KERN_DEBUG, dev, "Shutting down ethercard, status was Tx %04x Rx %04x Int %02x\n",
1197 ioread16(ioaddr + TxStatus),
1198 ioread16(ioaddr + RxStatus),
1199 ioread16(ioaddr + IntrStatus));
1200 netdev_printk(KERN_DEBUG, dev, "Queue pointers were Tx %d / %d, Rx %d / %d\n",
1201 yp->cur_tx, yp->dirty_tx,
1202 yp->cur_rx, yp->dirty_rx);
1203 }
1204
1205 /* Disable interrupts by clearing the interrupt mask. */
1206 iowrite16(0x0000, ioaddr + IntrEnb);
1207
1208 /* Stop the chip's Tx and Rx processes. */
1209 iowrite32(0x80000000, ioaddr + RxCtrl);
1210 iowrite32(0x80000000, ioaddr + TxCtrl);
1211
1212 del_timer(&yp->timer);
1213
1214 #if defined(__i386__)
1215 if (yellowfin_debug > 2) {
1216 printk(KERN_DEBUG " Tx ring at %08llx:\n",
1217 (unsigned long long)yp->tx_ring_dma);
1218 for (i = 0; i < TX_RING_SIZE*2; i++)
1219 printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x %08x\n",
1220 ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
1221 i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
1222 yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
1223 printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status);
1224 for (i = 0; i < TX_RING_SIZE; i++)
1225 printk(KERN_DEBUG " #%d status %04x %04x %04x %04x\n",
1226 i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
1227 yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
1228
1229 printk(KERN_DEBUG " Rx ring %08llx:\n",
1230 (unsigned long long)yp->rx_ring_dma);
1231 for (i = 0; i < RX_RING_SIZE; i++) {
1232 printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x\n",
1233 ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ',
1234 i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr,
1235 yp->rx_ring[i].result_status);
1236 if (yellowfin_debug > 6) {
1237 if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) {
1238 int j;
1239
1240 printk(KERN_DEBUG);
1241 for (j = 0; j < 0x50; j++)
1242 pr_cont(" %04x",
1243 get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
1244 pr_cont("\n");
1245 }
1246 }
1247 }
1248 }
1249 #endif /* __i386__ debugging only */
1250
1251 free_irq(yp->pci_dev->irq, dev);
1252
1253 /* Free all the skbuffs in the Rx queue. */
1254 for (i = 0; i < RX_RING_SIZE; i++) {
1255 yp->rx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
1256 yp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
1257 if (yp->rx_skbuff[i]) {
1258 dev_kfree_skb(yp->rx_skbuff[i]);
1259 }
1260 yp->rx_skbuff[i] = NULL;
1261 }
1262 for (i = 0; i < TX_RING_SIZE; i++) {
1263 if (yp->tx_skbuff[i])
1264 dev_kfree_skb(yp->tx_skbuff[i]);
1265 yp->tx_skbuff[i] = NULL;
1266 }
1267
1268 #ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
1269 if (yellowfin_debug > 0) {
1270 netdev_printk(KERN_DEBUG, dev, "Received %d frames that we should not have\n",
1271 bogus_rx);
1272 }
1273 #endif
1274
1275 return 0;
1276 }
1277
1278 /* Set or clear the multicast filter for this adaptor. */
1279
1280 static void set_rx_mode(struct net_device *dev)
1281 {
1282 struct yellowfin_private *yp = netdev_priv(dev);
1283 void __iomem *ioaddr = yp->base;
1284 u16 cfg_value = ioread16(ioaddr + Cnfg);
1285
1286 /* Stop the Rx process to change any value. */
1287 iowrite16(cfg_value & ~0x1000, ioaddr + Cnfg);
1288 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
1289 iowrite16(0x000F, ioaddr + AddrMode);
1290 } else if ((netdev_mc_count(dev) > 64) ||
1291 (dev->flags & IFF_ALLMULTI)) {
1292 /* Too many to filter well, or accept all multicasts. */
1293 iowrite16(0x000B, ioaddr + AddrMode);
1294 } else if (!netdev_mc_empty(dev)) { /* Must use the multicast hash table. */
1295 struct netdev_hw_addr *ha;
1296 u16 hash_table[4];
1297 int i;
1298
1299 memset(hash_table, 0, sizeof(hash_table));
1300 netdev_for_each_mc_addr(ha, dev) {
1301 unsigned int bit;
1302
1303 /* Due to a bug in the early chip versions, multiple filter
1304 slots must be set for each address. */
1305 if (yp->drv_flags & HasMulticastBug) {
1306 bit = (ether_crc_le(3, ha->addr) >> 3) & 0x3f;
1307 hash_table[bit >> 4] |= (1 << bit);
1308 bit = (ether_crc_le(4, ha->addr) >> 3) & 0x3f;
1309 hash_table[bit >> 4] |= (1 << bit);
1310 bit = (ether_crc_le(5, ha->addr) >> 3) & 0x3f;
1311 hash_table[bit >> 4] |= (1 << bit);
1312 }
1313 bit = (ether_crc_le(6, ha->addr) >> 3) & 0x3f;
1314 hash_table[bit >> 4] |= (1 << bit);
1315 }
1316 /* Copy the hash table to the chip. */
1317 for (i = 0; i < 4; i++)
1318 iowrite16(hash_table[i], ioaddr + HashTbl + i*2);
1319 iowrite16(0x0003, ioaddr + AddrMode);
1320 } else { /* Normal, unicast/broadcast-only mode. */
1321 iowrite16(0x0001, ioaddr + AddrMode);
1322 }
1323 /* Restart the Rx process. */
1324 iowrite16(cfg_value | 0x1000, ioaddr + Cnfg);
1325 }
1326
1327 static void yellowfin_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1328 {
1329 struct yellowfin_private *np = netdev_priv(dev);
1330
1331 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1332 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1333 strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info));
1334 }
1335
1336 static const struct ethtool_ops ethtool_ops = {
1337 .get_drvinfo = yellowfin_get_drvinfo
1338 };
1339
1340 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1341 {
1342 struct yellowfin_private *np = netdev_priv(dev);
1343 void __iomem *ioaddr = np->base;
1344 struct mii_ioctl_data *data = if_mii(rq);
1345
1346 switch(cmd) {
1347 case SIOCGMIIPHY: /* Get address of MII PHY in use. */
1348 data->phy_id = np->phys[0] & 0x1f;
1349 /* Fall Through */
1350
1351 case SIOCGMIIREG: /* Read MII PHY register. */
1352 data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f);
1353 return 0;
1354
1355 case SIOCSMIIREG: /* Write MII PHY register. */
1356 if (data->phy_id == np->phys[0]) {
1357 u16 value = data->val_in;
1358 switch (data->reg_num) {
1359 case 0:
1360 /* Check for autonegotiation on or reset. */
1361 np->medialock = (value & 0x9000) ? 0 : 1;
1362 if (np->medialock)
1363 np->full_duplex = (value & 0x0100) ? 1 : 0;
1364 break;
1365 case 4: np->advertising = value; break;
1366 }
1367 /* Perhaps check_duplex(dev), depending on chip semantics. */
1368 }
1369 mdio_write(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
1370 return 0;
1371 default:
1372 return -EOPNOTSUPP;
1373 }
1374 }
1375
1376
1377 static void yellowfin_remove_one(struct pci_dev *pdev)
1378 {
1379 struct net_device *dev = pci_get_drvdata(pdev);
1380 struct yellowfin_private *np;
1381
1382 BUG_ON(!dev);
1383 np = netdev_priv(dev);
1384
1385 pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
1386 np->tx_status_dma);
1387 pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
1388 pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
1389 unregister_netdev (dev);
1390
1391 pci_iounmap(pdev, np->base);
1392
1393 pci_release_regions (pdev);
1394
1395 free_netdev (dev);
1396 }
1397
1398
1399 static struct pci_driver yellowfin_driver = {
1400 .name = DRV_NAME,
1401 .id_table = yellowfin_pci_tbl,
1402 .probe = yellowfin_init_one,
1403 .remove = yellowfin_remove_one,
1404 };
1405
1406
1407 static int __init yellowfin_init (void)
1408 {
1409 /* when a module, this is printed whether or not devices are found in probe */
1410 #ifdef MODULE
1411 printk(version);
1412 #endif
1413 return pci_register_driver(&yellowfin_driver);
1414 }
1415
1416
1417 static void __exit yellowfin_cleanup (void)
1418 {
1419 pci_unregister_driver (&yellowfin_driver);
1420 }
1421
1422
1423 module_init(yellowfin_init);
1424 module_exit(yellowfin_cleanup);